HP-AUTH-MIB

File: HP-AUTH-MIB.mib (95252 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
HP-ICF-OID	OSPF-MIB	INET-ADDRESS-MIB

Imported symbols

OBJECT-TYPE	MODULE-IDENTITY	Integer32
Counter32	IpAddress	Gauge32
Unsigned32	RowStatus	DisplayString
TruthValue	DateAndTime	OBJECT-GROUP
MODULE-COMPLIANCE	hpSwitch	ospfIfEntry
ospfVirtIfEntry	InetAddress	InetAddressType

Defined Types

HpSwitchAuthenEntry
SEQUENCE
	hpSwitchAuthenIndex	INTEGER
	hpSwitchAuthenLoginPrimary	INTEGER
	hpSwitchAuthenLoginSecondary	INTEGER
	hpSwitchAuthenEnablePrimary	INTEGER
	hpSwitchAuthenEnableSecondary	INTEGER
	hpSwitchAuthenLoginServerGroupName	DisplayString
	hpSwitchAuthenEnableServerGroupName	DisplayString

HpSwitchTacacsServersEntry
SEQUENCE
	hpSwitchTacacsServerIndex	Integer32
	hpSwitchTacacsServerIpAddr	IpAddress
	hpSwitchTacacsServerKey	OCTET STRING
	hpSwitchTacacsServerStatus	RowStatus
	hpSwitchTacacsServerIsOobm	TruthValue
	hpSwitchTacacsServerKeyEncrypted	OCTET STRING

HpTacacsStatsServersEntry
SEQUENCE
	hpTacacsStatsServerIndex	Integer32
	hpTacacsStatsTacacsServerIpAddr	IpAddress
	hpTacacsStatsNumSessOpened	Counter32
	hpTacacsStatsNumSessClosed	Counter32
	hpTacacsStatsNumSessAborted	Counter32
	hpTacacsStatsNumSessErrors	Counter32
	hpTacacsStatsNumPktsIn	Counter32
	hpTacacsStatsNumPktsOut	Counter32

HpSwitchRadiusServerEntry
SEQUENCE
	hpSwitchRadiusServerIndex	Integer32
	hpSwitchRadiusServerIpAddr	IpAddress
	hpSwitchRadiusServerKey	OCTET STRING
	hpSwitchRadiusServerAuthPortNumber	Integer32
	hpSwitchRadiusServerAcctPortNumber	Integer32
	hpSwitchRadiusServerDynAutzEnabled	TruthValue
	hpSwitchRadiusServerDynAutzTimeWindow	Integer32
	hpSwitchRadiusServerStatus	RowStatus
	hpSwitchRadiusServerIsOobm	TruthValue
	hpSwitchRadiusServerKeyEncrypted	OCTET STRING

HpSwitchKmsChainConfigEntry
SEQUENCE
	hpSwitchKmsChainId	Integer32
	hpSwitchKmsChainName	DisplayString
	hpSwitchKmsChainKeys	Gauge32
	hpSwitchKmsChainActiveKeys	Gauge32
	hpSwitchKmsChainExpKeys	Gauge32
	hpSwitchKmsChainStatus	RowStatus

HpSwitchKmsKeyConfigEntry
SEQUENCE
	hpSwitchKmsKeyChainId	Integer32
	hpSwitchKmsKeyId	Integer32
	hpSwitchKmsKeyStr	OCTET STRING
	hpSwitchKmsKeyStartTime	Unsigned32
	hpSwitchKmsKeyStopTime	Unsigned32
	hpSwitchKmsKeyTxStartTime	Unsigned32
	hpSwitchKmsKeyTxStopTime	Unsigned32
	hpSwitchKmsKeyStatus	RowStatus
	hpSwitchKmsKeyEncrypted	OCTET STRING

HpSwitchOspfIfAuthEntry
SEQUENCE
	hpSwitchOspfIfAuthChain	DisplayString

HpSwitchOspfVirtIfAuthEntry
SEQUENCE
	hpSwitchOspfVirtIfAuthChain	DisplayString

HpicfSwitchUserConfigEntry
SEQUENCE
	hpicfSwitchUserConfigIndex	Integer32
	hpicfSwitchUserName	OCTET STRING
	hpicfSwitchOperatorName	OCTET STRING
	hpicfSwitchUserPassword	OCTET STRING
	hpicfSwitchOperatorPassword	OCTET STRING
	hpicfSwitchUserConfigStatus	RowStatus
	hpicfSwitchPortAccessName	OCTET STRING
	hpicfSwitchPortAccessPassword	OCTET STRING
	hpicfSwitchUserPasswordHashType	INTEGER
	hpicfSwitchOperatorPasswordHashType	INTEGER
	hpicfSwitchPortAccessPasswordHashType	INTEGER
	hpicfSwitchUserPasswordEncrypted	OCTET STRING
	hpicfSwitchOperatorPasswordEncrypted	OCTET STRING
	hpicfSwitchPortAccessPasswordEncrypted	OCTET STRING

HpSwitchAAAServerGroupEntry
SEQUENCE
	hpSwitchAAAServerGroupProtocolType	INTEGER
	hpSwitchAAAServerGroupIndex	Integer32
	hpSwitchAAAServerGroupServerIndex	Integer32
	hpSwitchAAAServerGroupName	DisplayString
	hpSwitchAAAServerGroupServerInetType	InetAddressType
	hpSwitchAAAServerGroupServerInetAddr	InetAddress
	hpSwitchAAAServerGroupStatus	RowStatus

HpSwitchLocalMgmtPrivUsernamesEntry
SEQUENCE
	hpSwitchLocalMgmtPrivUsernameIndex	Integer32
	hpSwitchLocalMgmtPrivUsernameStr	OCTET STRING
	hpSwitchLocalMgmtPrivUsernamePasswdType	INTEGER
	hpSwitchLocalMgmtPrivUsernamePasswd	OCTET STRING
	hpSwitchLocalMgmtPrivUsernameGrpIndex	Integer32
	hpSwitchLocalMgmtPrivUsernameStatus	RowStatus

Defined Values

hpSwitchAuthenticationMIB		1.3.6.1.4.1.11.2.14.11.5.1.16
This MIB module describes objects for managing the Authentication features of devices in the HP Integrated Communication Facility product line.
MODULE-IDENTITY

hpSwitchAuthenticationConfig		1.3.6.1.4.1.11.2.14.11.5.1.16.1
OBJECT IDENTIFIER

hpSwitchNumLoginAttempts		1.3.6.1.4.1.11.2.14.11.5.1.16.1.1
The number of login attempts allowed.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

hpSwitchAuthRespectPriv		1.3.6.1.4.1.11.2.14.11.5.1.16.1.2
This object allows switch to set privilege level of session based on the received configuration variable from authentication server. For RADIUS, the Service-Type attribute's configured value on the server should be 6-Administrative for manager's privilege level, or 7-NAS-prompt for the user/operator privilege level.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

hpSwitchAuthenticationEncryptCredentialsMethod		1.3.6.1.4.1.11.2.14.11.5.1.16.1.3
This object determines the methods used to encrypt passwords configured on this device.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), aes256cbc(1)

hpSwitchAuthenTable		1.3.6.1.4.1.11.2.14.11.5.1.16.2
This table lists the authentication methods to be tried for granting different access levels through various access tasks.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpSwitchAuthenEntry

hpSwitchAuthenEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.2.1
An Authentication Method Table Entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpSwitchAuthenEntry

hpSwitchAuthenIndex		1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.1
Signifies the access task for which authentication methods are listed in this entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	console(1), telnet(2), ieee8021X(3), webui(4), ssh(5), webauth(6), macauth(7), snmp(8)

hpSwitchAuthenLoginPrimary		1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.2
Indicates the primary login authentication mechanism, i.e whether TACACS+/Radius/Local will be tried first for a log into a session.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	local(1), tacacs(2), radius(3), radiusEap(4), radiusChap(5), sshRsa(6), radiusPeapMSChapv2(7)

hpSwitchAuthenLoginSecondary		1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.3
Indicates the secondary login authentication mechanism, i.e whether Local or Authorized will be tried in case the primary authentication results in an error. The Local authentication method used the credential database on the switch. The Authorized authentication method will granted access without authenticating. The cachedReauth authentication method will grant access in case of reauthentication retaining the current session attributes.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	local(1), none(2), authorized(3), cachedReauth(4)

hpSwitchAuthenEnablePrimary		1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.4
Indicates the primary authentication mechanism, i.e whether local, TACACS, Radius, ssh or Radius with Peap using MS chapv2 will be tried first for a change of a privilege level of session.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	local(1), tacacs(2), radius(3), sshPubkey(6), radiusPeapMSChapv2(7)

hpSwitchAuthenEnableSecondary		1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.5
Indicates the secondary login authentication mechanism, i.e whether Local or Authorized will be tried in case the primary authentication results in an error. The Local authentication method used the credential database on the switch. The Authorized authentication method will granted access without authenticating.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	local(1), none(2), authorized(3)

hpSwitchAuthenLoginServerGroupName		1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.6
The name that defines the RADIUS server group that this authentication method is associated with. The current maximum length is 12.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..255)

hpSwitchAuthenEnableServerGroupName		1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.7
The name that defines the RADIUS server group that this authentication method is associated with. The current maximum length is 12.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..255)

hpSwitchTacacsConfig		1.3.6.1.4.1.11.2.14.11.5.1.16.3
OBJECT IDENTIFIER

hpSwitchTacacsTimeout		1.3.6.1.4.1.11.2.14.11.5.1.16.3.1
The duration in seconds to wait for a response from the TACACS+ server host.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..255

hpSwitchTacacsAuthKey		1.3.6.1.4.1.11.2.14.11.5.1.16.3.2
The key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..100)

hpSwitchTacacsAuthKeyEncrypted		1.3.6.1.4.1.11.2.14.11.5.1.16.3.3
An encrypted form of the key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchTacacsAuthKey and hpSwitchTacacsAuthKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpSwitchTacacsServersTable		1.3.6.1.4.1.11.2.14.11.5.1.16.4
This table lists a maximum of 3 TACACS+ servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpSwitchTacacsServersEntry

hpSwitchTacacsServersEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.4.1
A TACACS+ server table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpSwitchTacacsServersEntry

hpSwitchTacacsServerIndex		1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.1
The index value which uniquely identifies a row in the TACACS+ Servers Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hpSwitchTacacsServerIpAddr		1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.2
The IP address of a TACACS+ Server.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

hpSwitchTacacsServerKey		1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.3
The key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..100)

hpSwitchTacacsServerStatus		1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.4
Status of Servers Table row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpSwitchTacacsServerIsOobm		1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.5
This object indicates whether this TACACS+ Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hpSwitchTacacsServerKeyEncrypted		1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.6
An encrypted form of the key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchTacacsServerKey and hpSwitchTacacsServerKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpTacacsStatsServersTable		1.3.6.1.4.1.11.2.14.11.5.1.16.5
A table containing statistics for the configured TACACS+ servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpTacacsStatsServersEntry

hpTacacsStatsServersEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.5.1
The information associated with each row in the TACACS+ servers table.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpTacacsStatsServersEntry

hpTacacsStatsServerIndex		1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.1
The index identifying the row in the table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hpTacacsStatsTacacsServerIpAddr		1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.2
The IP address of a TACACS+ Server.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

hpTacacsStatsNumSessOpened		1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.3
The number of authentication sessions opened with this server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpTacacsStatsNumSessClosed		1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.4
The number of authentication sessions closed (i.e. Passed/Failed) with this server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpTacacsStatsNumSessAborted		1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.5
The number of authentication sessions aborted with this server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpTacacsStatsNumSessErrors		1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.6
The number of authentication sessions with this server that ended in an error.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpTacacsStatsNumPktsIn		1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.7
The number of packets received from this server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpTacacsStatsNumPktsOut		1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.8
The number of packets sent to this server.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpSwitchRadiusConfig		1.3.6.1.4.1.11.2.14.11.5.1.16.6
OBJECT IDENTIFIER

hpSwitchRadiusDeadTime		1.3.6.1.4.1.11.2.14.11.5.1.16.6.1
The length of time in minutes a RADIUS server is skipped over by transaction requests (from 0 up to 24 hours). Used to improve RADIUS response times when some servers might be unavailable.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..1440

hpSwitchRadiusTimeout		1.3.6.1.4.1.11.2.14.11.5.1.16.6.2
The duration in seconds to wait for a response from the RADIUS server host.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..15

hpSwitchRadiusRetransmitAttempts		1.3.6.1.4.1.11.2.14.11.5.1.16.6.3
Maximum number of retransmission attempts.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..5

hpSwitchRadiusAuthKey		1.3.6.1.4.1.11.2.14.11.5.1.16.6.4
The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..100)

hpSwitchRadiusDynAutzPortNumber		1.3.6.1.4.1.11.2.14.11.5.1.16.6.5
The UDP port number to listen for Disconnect and Change-of-Authorization messages.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

hpSwitchRadiusAuthKeyEncrypted		1.3.6.1.4.1.11.2.14.11.5.1.16.6.6
An encrypted form of the key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchRadiusAuthKey and hpSwitchRadiusAuthKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpSwitchRadiusServerTable		1.3.6.1.4.1.11.2.14.11.5.1.16.7
This table lists a maximum of 3 RADIUS servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpSwitchRadiusServerEntry

hpSwitchRadiusServerEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1
A RADIUS server table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpSwitchRadiusServerEntry

hpSwitchRadiusServerIndex		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.1
The index value which uniquely identifies a row in the RADIUS Servers Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hpSwitchRadiusServerIpAddr		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.2
The IP address of a RADIUS Server.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

hpSwitchRadiusServerKey		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.3
The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..100)

hpSwitchRadiusServerAuthPortNumber		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.4
The UDP destination port number to use for sending authentication requests to this RADIUS Server.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..65535

hpSwitchRadiusServerAcctPortNumber		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.5
The UDP destination port number to use for sending accounting requests to this RADIUS server.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1..65535

hpSwitchRadiusServerDynAutzEnabled		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.6
This object indicates whether Dynamic Authorization messages (Disconnect-Requests and CoA-Requests) are authorized for processing from this RADIUS Server.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hpSwitchRadiusServerDynAutzTimeWindow		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.7
A non-zero value indicates that the Event-Timestamp attribute must be used in the dynamic authorization communication exchange between the NAS and the RADIUS server. Such a value determines the time window (in seconds) within which RADIUS packets carrying the Event-Timestamp attribute will be considered as current and accepted for processing by the NAS and the RADIUS Server. Zero value disables checking for the Event-Timestamp attribute. The default time window is 300 seconds.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..65535

hpSwitchRadiusServerStatus		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.8
Status of Servers Table row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpSwitchRadiusServerIsOobm		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.9
This object indicates whether this RADIUS Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

hpSwitchRadiusServerKeyEncrypted		1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.10
An encrypted form of the key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchRadiusServerKey and hpSwitchRadiusServerKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpSwitchKmsChainConfigTable		1.3.6.1.4.1.11.2.14.11.5.1.16.15
This table contains configuration objects for Key Management Subsystem chains.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpSwitchKmsChainConfigEntry

hpSwitchKmsChainConfigEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.15.1
KMS chain configuration table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpSwitchKmsChainConfigEntry

hpSwitchKmsChainId		1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.1
This object is KMS chain index. Do not rely on it since it may be removed in future, when it is possible to use hpSwitchKmsChainName for index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..32767

hpSwitchKmsChainName		1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.2
This object configures KMS chain name.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..32)

hpSwitchKmsChainKeys		1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.4
Returns number of keys in chain.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hpSwitchKmsChainActiveKeys		1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.5
Returns number of active keys in chain.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hpSwitchKmsChainExpKeys		1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.6
Returns number of expired keys in chain.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

hpSwitchKmsChainStatus		1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.7
Status of the KMS chain configuration table status row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpSwitchKmsKeyConfigTable		1.3.6.1.4.1.11.2.14.11.5.1.16.16
This table contains configuration objects for Key Management Subsystem.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpSwitchKmsKeyConfigEntry

hpSwitchKmsKeyConfigEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.16.1
KMS configuration table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpSwitchKmsKeyConfigEntry

hpSwitchKmsKeyChainId		1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.1
This object is KMS chain index. Do not rely on it since it may be removed in future, when it is possible to use hpSwitchKmsChainName for index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..32767

hpSwitchKmsKeyId		1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.2
This object is key index.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..255

hpSwitchKmsKeyStr		1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.3
This object configures key chain name.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..16)

hpSwitchKmsKeyStartTime		1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.4
Key accept start time.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

hpSwitchKmsKeyStopTime		1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.5
Key accept stop time.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

hpSwitchKmsKeyTxStartTime		1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.6
Key transmit start time.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

hpSwitchKmsKeyTxStopTime		1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.7
Key transmit stop time.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

hpSwitchKmsKeyStatus		1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.8
Status of the KMS chain configuration table status row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpSwitchKmsKeyEncrypted		1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.9
An encrypted form of the KMS key. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchKmsKeyStr and hpSwitchKmsKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpSwitchOspfIfAuthTable		1.3.6.1.4.1.11.2.14.11.5.1.16.17
This table supplements OSPF interface configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpSwitchOspfIfAuthEntry

hpSwitchOspfIfAuthEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.17.1
OSPF interface authentication configuration table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpSwitchOspfIfAuthEntry

hpSwitchOspfIfAuthChain		1.3.6.1.4.1.11.2.14.11.5.1.16.17.1.1
This object configures KMS chain name for OSPF interface.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hpSwitchOspfVirtIfAuthTable		1.3.6.1.4.1.11.2.14.11.5.1.16.18
This table supplements OSPF virtual interface configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpSwitchOspfVirtIfAuthEntry

hpSwitchOspfVirtIfAuthEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.18.1
OSPF virtual interface authentication configuration table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpSwitchOspfVirtIfAuthEntry

hpSwitchOspfVirtIfAuthChain		1.3.6.1.4.1.11.2.14.11.5.1.16.18.1.1
This object configures KMS chain name for OSPF virtual interface.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

hpSwitchSslConfig		1.3.6.1.4.1.11.2.14.11.5.1.16.12
OBJECT IDENTIFIER

hpSwitchSslAdminStatus		1.3.6.1.4.1.11.2.14.11.5.1.16.12.1
This objects specifies the desired operational status of SSL.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

hpSwitchSslPortNumber		1.3.6.1.4.1.11.2.14.11.5.1.16.12.2
The port number on which SSL server should listen for connection requests.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

hpSwitchCertConfig		1.3.6.1.4.1.11.2.14.11.5.1.16.13
OBJECT IDENTIFIER

hpSwitchServerCertificateOperation		1.3.6.1.4.1.11.2.14.11.5.1.16.13.1
This object when read returns the last write value. If no previous write value exists, then returns 'none'. When written, each value causes the following action: 'none' - no action is taken, null operation. 'useInstalled' - causes the switch to use a previously installed server certificate, if one is present. 'createAndUseSelfSigned' - causes the switch to create a new self-signed certificate based on the hpSwitchServerNewCertificateXXX parameters and use it. 'createCACertReq' - causes the switch to create a certificate request, which is to be signed by a CA authority, based on the hpSwitchServerNewCertificateXXX. Parameters. The user must subsequently download the signed certificate to complete certificate creation process. 'applyCASignedCert' - causes the switch to process the user's response (signed certificate from CA) to complete the certificate creation process. 'abortCASignedRequest' - causes the switch to abort the certificate request procedure, which was initiated on createAndUseCASigned set.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), useInstalled(2), createAndUseSelfSigned(3), createCACertReq(4), applyCASignedCert(5), abortCASignedRequest(6)

hpSwitchServerNewRSAKeyOperation		1.3.6.1.4.1.11.2.14.11.5.1.16.13.2
This object when read returns either 'useInstalled' or 'createBits1024'. 'useInstalled' is returned when a certificate RSA key already exists on switch. 'createBits1024' is returned when no certificate RSA key exists on switch. When written, each value causes the following action: 'useInstalled' - uses currently configured RSA key already present on the switch. 'createBits512' - deprecated, no longer supported. 'createBits768' - deprecated, no longer supported. 'createBits1024' - specifies the creation of a new RSA key of 1024-bit length. 'createBits2048' - specifies the creation of a new RSA key of 2048-bit length.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	useInstalled(1), createBits512(2), createBits768(3), createBits1024(4), createBits2048(5)

hpSwitchServerNewCertificateStartDate		1.3.6.1.4.1.11.2.14.11.5.1.16.13.3
Specifies the start date of validity for a new server certificate.
Status: current	Access: read-write
OBJECT-TYPE
	DateAndTime

hpSwitchServerNewCertificateEndDate		1.3.6.1.4.1.11.2.14.11.5.1.16.13.4
Specifies the end date of validity for a new server certificate.
Status: current	Access: read-write
OBJECT-TYPE
	DateAndTime

hpSwitchServerNewCertificateCommonName		1.3.6.1.4.1.11.2.14.11.5.1.16.13.5
Specifies the common name for a new server certificate.
Status: deprecated	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..40)

hpSwitchServerNewCertificateOrgUnit		1.3.6.1.4.1.11.2.14.11.5.1.16.13.6
Specifies the organization for a new server certificate.
Status: deprecated	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..40)

hpSwitchServerNewCertificateOrgName		1.3.6.1.4.1.11.2.14.11.5.1.16.13.7
Specifies the organization name for a new server certificate.
Status: deprecated	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..40)

hpSwitchServerNewCertificateCityName		1.3.6.1.4.1.11.2.14.11.5.1.16.13.8
Specifies the city for a new server certificate.
Status: deprecated	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..40)

hpSwitchServerNewCertificateStateName		1.3.6.1.4.1.11.2.14.11.5.1.16.13.9
Specifies the state for a new server certificate.
Status: deprecated	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..40)

hpSwitchServerNewCertificateCountryCode		1.3.6.1.4.1.11.2.14.11.5.1.16.13.10
Specifies the 2-letter ISO country code of the server certificate.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(2)

hpSwitchServerNewCertCommonName		1.3.6.1.4.1.11.2.14.11.5.1.16.13.11
Specifies the common name for a new server certificate.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..200)

hpSwitchServerNewCertOrgUnit		1.3.6.1.4.1.11.2.14.11.5.1.16.13.12
Specifies the organization for a new server certificate.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..200)

hpSwitchServerNewCertOrgName		1.3.6.1.4.1.11.2.14.11.5.1.16.13.13
Specifies the organization name for a new server certificate.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..200)

hpSwitchServerNewCertCityName		1.3.6.1.4.1.11.2.14.11.5.1.16.13.14
Specifies the city for a new server certificate.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..200)

hpSwitchServerNewCertStateName		1.3.6.1.4.1.11.2.14.11.5.1.16.13.15
Specifies the state for a new server certificate.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..200)

hpSwitchServerNewCertKeySizeExists		1.3.6.1.4.1.11.2.14.11.5.1.16.13.16
Specifies whether Key Size is determined to generate the certificate key pair.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpSwitchCertStatus		1.3.6.1.4.1.11.2.14.11.5.1.16.14
OBJECT IDENTIFIER

hpSwitchServerCertificateType		1.3.6.1.4.1.11.2.14.11.5.1.16.14.1
Specifies the type of server certificate the switch is currently using as follows: 'none' - no server certificate is present. 'pendCaSigned' - switch is waiting for user to offer CA-signed certificate request. 'selfSigned' - a self-signed server certificate is being used. 'caSigned' - a CA-signed server certificate is being used.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), pendCaSigned(2), selfSigned(3), caSigned(4)

hpSwitchServerCertificateRSAKeySize		1.3.6.1.4.1.11.2.14.11.5.1.16.14.2
Specifies the RSA key length of the public key contained in the certificate as follows: 'none' - no certificate is present 'Bits512' - certificate has a 512-bit public key 'Bits768' - certificate has a 768-bit public key 'Bits1024' - certificate has a 1024-bit public key 'Bits2048' - certificate has a 2048-bit public key
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), bits512(1), bits768(2), bits1024(3), bits2048(4)

hpSwitchServerCertificateSerialNumber		1.3.6.1.4.1.11.2.14.11.5.1.16.14.3
Specifies the serial number of installed server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..40)

hpSwitchServerCertificateStartDate		1.3.6.1.4.1.11.2.14.11.5.1.16.14.4
Specifies the start date of validity of installed server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hpSwitchServerCertificateEndDate		1.3.6.1.4.1.11.2.14.11.5.1.16.14.5
Specifies the end date of validity of installed server server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

hpSwitchServerCertificateCommonName		1.3.6.1.4.1.11.2.14.11.5.1.16.14.6
Specifies the common name of installed server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..40)

hpSwitchServerCertificateOrgUnit		1.3.6.1.4.1.11.2.14.11.5.1.16.14.7
Specifies the organization of installed server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..40)

hpSwitchServerCertificateOrgName		1.3.6.1.4.1.11.2.14.11.5.1.16.14.8
Specifies the organization name of installed server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..40)

hpSwitchServerCertificateCityName		1.3.6.1.4.1.11.2.14.11.5.1.16.14.9
Specifies the city of installed server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..40)

hpSwitchServerCertificateStateName		1.3.6.1.4.1.11.2.14.11.5.1.16.14.10
Specifies the state of installed server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..40)

hpSwitchServerCertificateCountryCode		1.3.6.1.4.1.11.2.14.11.5.1.16.14.11
Specifies the 2-letter ISO country code of installed server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..40)

hpSwitchServerCertificateFingerprintMD5		1.3.6.1.4.1.11.2.14.11.5.1.16.14.12
Specifies the MD5 fingerprint of installed server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..48)

hpSwitchServerCertificateFingerprintSHA1		1.3.6.1.4.1.11.2.14.11.5.1.16.14.13
Specifies the SHA1 fingerprint of installed server certificate.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..51)

hpicfSwitchUserConfigTable		1.3.6.1.4.1.11.2.14.11.5.1.16.19
This table supplements the manager/operator name/password. The manager/operator password are limited to the CLI interface through Console and Menu interface, and web.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpicfSwitchUserConfigEntry

hpicfSwitchUserConfigEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1
Manager/operator name/password table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpicfSwitchUserConfigEntry

hpicfSwitchUserConfigIndex		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.1
The index value uniquely identifies a row in the User Config table, currently limited to a value of 1.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

hpicfSwitchUserName		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.2
The User Name, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hpicfSwitchOperatorName		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.3
The Operator Name, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hpicfSwitchUserPassword		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.4
The User Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hpicfSwitchOperatorPassword		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.5
The Operator Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hpicfSwitchUserConfigStatus		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.6
Status of User Config Table row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpicfSwitchPortAccessName		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.7
The Port-Access Name, ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hpicfSwitchPortAccessPassword		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.8
The Port-Access Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..1024)

hpicfSwitchUserPasswordHashType		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.9
The hash-type of the User Password.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(0), plainText(1), sha1(3)

hpicfSwitchOperatorPasswordHashType		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.10
The hash-type of the Operator Password.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(0), plainText(1), sha1(3)

hpicfSwitchPortAccessPasswordHashType		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.11
The hash-type of the Port-Access Password.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(0), plainText(1)

hpicfSwitchUserPasswordEncrypted		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.12
An encrypted form of the user password. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpicfSwitchUserPassword and hpicfSwitchUserPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpicfSwitchOperatorPasswordEncrypted		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.13
An encrypted form of the operator password. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpicfSwitchOperatorPassword and hpicfSwitchOperatorPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpicfSwitchPortAccessPasswordEncrypted		1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.14
An encrypted form of the port-access password. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpicfSwitchPortAccessPassword and hpicfSwitchPortAccessPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hpSwitchAAAServerGroupTable		1.3.6.1.4.1.11.2.14.11.5.1.16.20
This table lists the RADIUS server groups.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpSwitchAAAServerGroupEntry

hpSwitchAAAServerGroupEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.20.1
RADIUS server group entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpSwitchAAAServerGroupEntry

hpSwitchAAAServerGroupProtocolType		1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.1
This part of the index indicates which protocol server the server group is for. See the documentation protocols supported.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	radius(1), tacacs(2)

hpSwitchAAAServerGroupIndex		1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.2
This index indicates the server group in the AAA server group table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hpSwitchAAAServerGroupServerIndex		1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.3
The index value which identifies the server in the server group.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hpSwitchAAAServerGroupName		1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.4
The name of a given AAA server group. The current maximum length is 12.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..255)

hpSwitchAAAServerGroupServerInetType		1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.5
The IP Address type of the server. Currently only Ipv4 is supported.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

hpSwitchAAAServerGroupServerInetAddr		1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.6
The IP Address of the server.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

hpSwitchAAAServerGroupStatus		1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.7
The status of the AAA server group row. Supported values are createAndGo, destroy, and active.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpSwitchLocalMgmtPrivUsernamesTable		1.3.6.1.4.1.11.2.14.11.5.1.16.21
This table lists the Local Management Privilege user names.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpSwitchLocalMgmtPrivUsernamesEntry

hpSwitchLocalMgmtPrivUsernamesEntry		1.3.6.1.4.1.11.2.14.11.5.1.16.21.1
Local Management Usernames entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpSwitchLocalMgmtPrivUsernamesEntry

hpSwitchLocalMgmtPrivUsernameIndex		1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.1
The index value which identifies a row in the command table.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

hpSwitchLocalMgmtPrivUsernameStr		1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.2
The username .
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(1..255)

hpSwitchLocalMgmtPrivUsernamePasswdType		1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.3
The type of encryption used for this Conceptual row password object.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	unknown(0), sha1(3)

hpSwitchLocalMgmtPrivUsernamePasswd		1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.4
Storage location for the password associated with this Username. Always returns a NULL string.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(0..255)

hpSwitchLocalMgmtPrivUsernameGrpIndex		1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.5
The index that represents which group this user is a member of.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

hpSwitchLocalMgmtPrivUsernameStatus		1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.6
The status of the Local Management Privilege username row.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpSwitchAuthenticationMIBConformance		1.3.6.1.4.1.11.2.14.11.5.1.16.11
OBJECT IDENTIFIER

hpSwitchAuthenticationMIBCompliances		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1
OBJECT IDENTIFIER

hpSwitchAuthenticationMIBGroups		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2
OBJECT IDENTIFIER

hpSwitchAuthenticationMIBCompliance		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.1
The compliance statement for devices implementing the HP Authentication Mib.
Status: deprecated	Access: read-create
MODULE-COMPLIANCE

hpSwitchAuthenticationMIBCompliance1		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.2
The compliance statement for devices implementing the HP Authentication Mib.
Status: deprecated	Access: read-create
MODULE-COMPLIANCE

hpSwitchAuthenticationMIBCompliance2		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.3
The compliance statement for devices implementing the HP Authentication Mib.
Status: deprecated	Access: read-create
MODULE-COMPLIANCE

hpSwitchAuthenticationMIBComplianceOobm		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.4
The compliance statement for devices implementing the HP Authentication Mib with OOBM support
Status: current	Access: read-create
MODULE-COMPLIANCE

hpSwitchUserConfigMIBCompliance		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.5
The compliance statement for configuring user-name/password for operator/manager/port-access.
Status: deprecated	Access: read-create
MODULE-COMPLIANCE

hpSwitchAAAServerMIBCompliance		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.6
The compliance statement for configuring RADIUS server groups.
Status: current	Access: read-create
MODULE-COMPLIANCE

hpSwitchAuthenMIBCompliance		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.7
The compliance statement for listing the authentication methods to be tried for granting different access levels through various access tasks
Status: current	Access: read-create
MODULE-COMPLIANCE

hpSwitchLocalMgmtPrivUserMIBCompliance		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.8
The compliance statement for listing the local management priviledge methods to be tried for granting different access levels through various access tasks
Status: current	Access: read-only
MODULE-COMPLIANCE

hpSwitchAuthenticationMIBCompliance3		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.9
The compliance statement for devices implementing the HP Authentication Mib.
Status: current	Access: read-only
MODULE-COMPLIANCE

hpSwitchUserConfigMIBCompliance1		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.10
The compliance statement for configuring user-name/password for operator/manager/port-access.
Status: current	Access: read-only
MODULE-COMPLIANCE

hpSwitchLocalMgmtPrivUserMIBCompliance1		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.11
The compliance statement for configuring user-name/password for operator/manager/port-access.
Status: current	Access: read-only
MODULE-COMPLIANCE

hpSwitchAuthenticationMIBCompliance4		1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.12
The compliance statement for devices implementing the HP Authentication MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

hpSwitchAuthenticationConfigGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.1
A collection of objects for configuring the authentication features.
Status: deprecated	Access: read-only
OBJECT-GROUP

hpSwitchTacacsConfigGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.2
A collection of objects for configuring the state of the TACACS+ protocol.
Status: deprecated	Access: read-only
OBJECT-GROUP

hpSwitchTacacsStatsGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.3
A collection of objects for viewing the status information of the TACACS+ protocol.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchRadiusConfigGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.4
A collection of objects for configuring the state of the RADIUS protocol.
Status: deprecated	Access: read-only
OBJECT-GROUP

hpSwitchKmsGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.6
A collection of objects for configuring KMS functionality.
Status: deprecated	Access: read-only
OBJECT-GROUP

hpSwitchOspfAuthGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.7
A collection of objects for configuring OSPF authentication.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchAuthenticationConfigGroup1		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.8
A collection of objects for configuring the authentication features.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchSslGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.9
A collection of objects for configuring SSL Servers.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchCertGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.10
A collection of objects for configuring Certificates.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchCertStatusGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.11
A collection of objects for configuring Certificate Status.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchTacacsOobmGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.12
A collection of objects for configuring the TACACS+ server entry with support for OOBM (Out of Band Management) interface.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchRadiusOobmGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.13
A collection of objects for configuring the RADIUS server entry with support for OOBM (Out of Band Management) interface.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchCertStatusGroup2		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.14
A collection of objects for configuring Certificate Status.
Status: deprecated	Access: read-only
OBJECT-GROUP

hpSwitchUserConfigGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.15
A collection of objects for configuring user-name/password for operator/manager/port-access.
Status: deprecated	Access: read-only
OBJECT-GROUP

hpSwitchAAAServerGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.16
A collection of objects for configuring RADIUS server groups.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchAuthenGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.17
A collection of objects for listing the authentication methods to be tried for granting different access levels through various access tasks
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchAuthLocalMgmtPrivUserGroup		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.18
A collection of objects for configuring Local Manangement Privilege Groups
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchTacacsConfigGroup1		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.19
A collection of objects for configuring the state of the TACACS+ protocol.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchRadiusConfigGroup1		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.20
A collection of objects for configuring the state of the RADIUS protocol.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchKmsGroup1		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.21
A collection of objects for configuring KMS functionality.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchUserConfigGroup1		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.22
A collection of objects for configuring user-name/password for operator/manager/port-access.
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchAuthLocalMgmtPrivUserGroup1		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.23
Row Status of objects for configuring Local Manangement Priviledge Groups
Status: current	Access: read-only
OBJECT-GROUP

hpSwitchCertStatusGroup3		1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.24
A collection of objects for configuring Certificate Keys.
Status: current	Access: read-only
OBJECT-GROUP

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor