HP-ICF-USBPORT

File: HP-ICF-USBPORT.mib (4768 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF HP-ICF-OID

Imported symbols

OBJECT-TYPE NOTIFICATION-TYPE MODULE-IDENTITY
NOTIFICATION-GROUP OBJECT-GROUP MODULE-COMPLIANCE
hpSwitch

Defined Values

hpicfUSBPortMIB 1.3.6.1.4.1.11.2.14.11.5.1.53
This MIB module manages the USB Port.
MODULE-IDENTITY    

hpicfUSBPortConfig 1.3.6.1.4.1.11.2.14.11.5.1.53.1
OBJECT IDENTIFIER    

hpicfUSBPortStatus 1.3.6.1.4.1.11.2.14.11.5.1.53.1.1
hpicfUSBPortStatus control whether or not the USB port is enabled. notPresent(0) - USBPort is not present enabled(1) - USBPort Enabled. disabled(2) - USBPort Disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notPresent(0), enabled(1), disabled(2)  

hpicfUSBPortZeroPowerStatus 1.3.6.1.4.1.11.2.14.11.5.1.53.1.2
hpicfUSBPortZeroPowerStatus indicates if the USB port zero power is on or off. powerUnavailable(0) - USBPort power reading is unavailable. powerOff(1) - USBPort power is off. powerOn(2) - USBPort power is on.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER powerUnavailable(0), powerOff(1), powerOn(2)  

hpicfUSBPortNotifications 1.3.6.1.4.1.11.2.14.11.5.1.53.0
OBJECT IDENTIFIER    

hpicfUSBPortEnabled 1.3.6.1.4.1.11.2.14.11.5.1.53.0.1
An hpicfUSBPortEnabled notification signifies that the SNMP entity, acting in an agent role, has detected that the hpicfUSBPortStatus object has transitioned into the 'enabled' state.
Status: current Access: read-only
NOTIFICATION-TYPE    

hpicfUSBPortDisabled 1.3.6.1.4.1.11.2.14.11.5.1.53.0.2
An hpicfUSBPortDisabled notification signifies that the SNMP entity, acting in an agent role, has detected that the hpicfUSBPortStatus object has transitioned into the 'disabled' state.
Status: current Access: read-only
NOTIFICATION-TYPE    

hpicfUSBPortConformance 1.3.6.1.4.1.11.2.14.11.5.1.53.2
OBJECT IDENTIFIER    

hpicfUSBPortGroups 1.3.6.1.4.1.11.2.14.11.5.1.53.2.1
OBJECT IDENTIFIER    

hpicfUSBPortBaseGroup 1.3.6.1.4.1.11.2.14.11.5.1.53.2.1.1
A mandatory group with an object to enable or disable the USB port.
Status: current Access: read-only
OBJECT-GROUP    

hpicfUSBPortNotificationGroup 1.3.6.1.4.1.11.2.14.11.5.1.53.2.1.2
The hpicfUSBPort MIB Notification Group.
Status: current Access: read-only
NOTIFICATION-GROUP    

hpicfUSBPortCompliances 1.3.6.1.4.1.11.2.14.11.5.1.53.2.2
OBJECT IDENTIFIER    

hpicfUSBPortCompliance 1.3.6.1.4.1.11.2.14.11.5.1.53.2.2.1
Compliance statement for HP ICF USBPort configuration
Status: current Access: read-only
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor