HP-MPE-XL

File: HP-MPE-XL.mib (7821 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

enterprises NetworkAddress IpAddress
Counter Gauge Timeticks
OBJECT-TYPE DisplayString

Defined Types

VolumeEntry  
SEQUENCE    
  volumeLDEV INTEGER
  volumeName DisplayString
  volumeDriveType DisplayString
  volumeSectorSize INTEGER
  volumeType INTEGER
  volumeCapacity INTEGER
  volumeMPEOverhead INTEGER
  volumeMPETransOverhead INTEGER
  volumeMPEConfigMaxTrans INTEGER
  volumeDirSpaceOverhead INTEGER
  volumeFileLabelOverhead INTEGER
  volumeTransactionMgmtOverhead INTEGER
  volumeSpoolFileDiscUsage INTEGER
  volumePermFiles INTEGER
  volumeTempFiles INTEGER
  volumeTotalFreeSpace INTEGER
  volumeLargestContigFree INTEGER
  volumePercentUtilized INTEGER

Defined Values

hp 1.3.6.1.4.1.11
OBJECT IDENTIFIER    

nm 1.3.6.1.4.1.11.2
OBJECT IDENTIFIER    

system 1.3.6.1.4.1.11.2.3
OBJECT IDENTIFIER    

general 1.3.6.1.4.1.11.2.3.1
OBJECT IDENTIFIER    

mpeXLSystem 1.3.6.1.4.1.11.2.3.1.3
OBJECT IDENTIFIER    

volume 1.3.6.1.4.1.11.2.3.1.3.1
OBJECT IDENTIFIER    

processor 1.3.6.1.4.1.11.2.3.1.3.2
OBJECT IDENTIFIER    

volumeMounted 1.3.6.1.4.1.11.2.3.1.3.1.1
The number of volumes that are currently mounted on the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeTable 1.3.6.1.4.1.11.2.3.1.3.1.2
Volume table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VolumeEntry

volumeEntry 1.3.6.1.4.1.11.2.3.1.3.1.2.1
Each entry contains objects that define the volume.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VolumeEntry  

volumeLDEV 1.3.6.1.4.1.11.2.3.1.3.1.2.1.1
The logical device number for the volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeName 1.3.6.1.4.1.11.2.3.1.3.1.2.1.2
This is the volume set name combined with the member name that uniquely distinguishes the actual volume on the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

volumeDriveType 1.3.6.1.4.1.11.2.3.1.3.1.2.1.3
The type of the actual hardware device, e.g. HP7935.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

volumeSectorSize 1.3.6.1.4.1.11.2.3.1.3.1.2.1.4
The logical sector size of the volume in bytes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeType 1.3.6.1.4.1.11.2.3.1.3.1.2.1.5
The type of volume set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER system(1), nonSystem(2)  

volumeCapacity 1.3.6.1.4.1.11.2.3.1.3.1.2.1.6
The capacity of the volume in sectors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeMPEOverhead 1.3.6.1.4.1.11.2.3.1.3.1.2.1.7
The total overhead which consists of everything on a volume that is not set aside for file space use. This includes volume label, file label table, directory, volume set information table, free space map, transient space, and transaction management overhead.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeMPETransOverhead 1.3.6.1.4.1.11.2.3.1.3.1.2.1.8
The total MPE XL transient space overhead for the volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeMPEConfigMaxTrans 1.3.6.1.4.1.11.2.3.1.3.1.2.1.9
The configured maximum transient space for the volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeDirSpaceOverhead 1.3.6.1.4.1.11.2.3.1.3.1.2.1.10
The directory space overhead that is reserved for accounting information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeFileLabelOverhead 1.3.6.1.4.1.11.2.3.1.3.1.2.1.11
The file label overhead for this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeTransactionMgmtOverhead 1.3.6.1.4.1.11.2.3.1.3.1.2.1.12
The transaction management overhead for this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeSpoolFileDiscUsage 1.3.6.1.4.1.11.2.3.1.3.1.2.1.13
The spool file disc space usage which consists of the volume space that is used by hidden spool files that are not part of the permanent file space.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumePermFiles 1.3.6.1.4.1.11.2.3.1.3.1.2.1.14
The space used for permanent files on this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeTempFiles 1.3.6.1.4.1.11.2.3.1.3.1.2.1.15
The space used for temporary files on this volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeTotalFreeSpace 1.3.6.1.4.1.11.2.3.1.3.1.2.1.16
The total free space for the volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumeLargestContigFree 1.3.6.1.4.1.11.2.3.1.3.1.2.1.17
The largest contiguous free space area on the volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

volumePercentUtilized 1.3.6.1.4.1.11.2.3.1.3.1.2.1.18
The percent of the volume currently being used for file storage and operating system overhead.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numActive 1.3.6.1.4.1.11.2.3.1.3.2.1
Number of processors currently active, in the system. A processor is considered active if it is capable of begin dispatched.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

numPresent 1.3.6.1.4.1.11.2.3.1.3.2.2
The number of processors physically present in the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

processorMIstate 1.3.6.1.4.1.11.2.3.1.3.2.3
Setting this object to 1 will result in the measurement interface being turned on for the global processor statistics which will increase the amount of CPU used by the SNMP/XL Agent. Setting this object to 0 will cause the measurement interface to be disabled for the global processor statistics. When the measurement interface is enabled, the cpuUtilization object described below may be obtained.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cpuUtilization 1.3.6.1.4.1.11.2.3.1.3.2.4
The overall CPU utilization percentage on the system. If the system has more than one processor, the value returned is averaged out over all of the processors that are present. The measurement interface must be enabled in order to get a valid value returned for this object ( see above object ). The number returned is the percentage of the CPU that was used since the last time the number was sampled. This value is consistent with various HP performance tools such as Glance/XL. If the measurement interface is not enabled, the value returned will be 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER