HP-SN-IPX-MIB
File:
HP-SN-IPX-MIB.mib (39832 bytes)
Imported modules
Imported symbols
Defined Types
Action |
|
INTEGER |
deny(0), permit(1) |
|
|
SnIpxCacheEntry |
|
SEQUENCE |
|
|
|
|
snIpxCacheIndex |
INTEGER |
|
|
snIpxCacheNetNum |
NetNumber |
|
|
snIpxCacheNode |
PhysAddress |
|
|
snIpxCacheOutFilter |
RtrStatus |
|
|
snIpxCacheEncap |
INTEGER |
|
|
snIpxCachePort |
PortIndex |
|
SnIpxRouteEntry |
|
SEQUENCE |
|
|
|
|
snIpxRouteIndex |
INTEGER |
|
|
snIpxDestNetNum |
NetNumber |
|
|
snIpxFwdRouterNode |
PhysAddress |
|
|
snIpxDestHopCnts |
INTEGER |
|
|
snIpxRouteMetric |
INTEGER |
|
|
snIpxDestPort |
INTEGER |
|
SnIpxServerEntry |
|
SEQUENCE |
|
|
|
|
snIpxServerIndex |
INTEGER |
|
|
snIpxServerType |
INTEGER |
|
|
snIpxServerNetNum |
NetNumber |
|
|
snIpxServerNode |
PhysAddress |
|
|
snIpxServerSocket |
INTEGER |
|
|
snIpxServerHopCnts |
INTEGER |
|
|
snIpxServerName |
OCTET STRING |
|
SnIpxFwdFilterEntry |
|
SEQUENCE |
|
|
|
|
snIpxFwdFilterId |
INTEGER |
|
|
snIpxFwdFilterAction |
Action |
|
|
snIpxFwdFilterSocket |
INTEGER |
|
|
snIpxFwdFilterSrcNet |
NetNumber |
|
|
snIpxFwdFilterSrcNode |
PhysAddress |
|
|
snIpxFwdFilterDestNet |
NetNumber |
|
|
snIpxFwdFilterDestNode |
PhysAddress |
|
|
snIpxFwdFilterRowStatus |
INTEGER |
|
SnIpxRipFilterEntry |
|
SEQUENCE |
|
|
|
|
snIpxRipFilterId |
INTEGER |
|
|
snIpxRipFilterAction |
Action |
|
|
snIpxRipFilterNet |
NetNumber |
|
|
snIpxRipFilterMask |
NetNumber |
|
|
snIpxRipFilterRowStatus |
INTEGER |
|
SnIpxSapFilterEntry |
|
SEQUENCE |
|
|
|
|
snIpxSapFilterId |
INTEGER |
|
|
snIpxSapFilterAction |
Action |
|
|
snIpxSapFilterType |
INTEGER |
|
|
snIpxSapFilterName |
OCTET STRING |
|
|
snIpxSapFilterRowStatus |
INTEGER |
|
SnIpxIfFwdAccessEntry |
|
SEQUENCE |
|
|
|
|
snIpxIfFwdAccessPort |
INTEGER |
|
|
snIpxIfFwdAccessDir |
INTEGER |
|
|
snIpxIfFwdAccessFilterList |
OCTET STRING |
|
|
snIpxIfFwdAccessRowStatus |
INTEGER |
|
SnIpxIfRipAccessEntry |
|
SEQUENCE |
|
|
|
|
snIpxIfRipAccessPort |
INTEGER |
|
|
snIpxIfRipAccessDir |
INTEGER |
|
|
snIpxIfRipAccessFilterList |
OCTET STRING |
|
|
snIpxIfRipAccessRowStatus |
INTEGER |
|
SnIpxIfSapAccessEntry |
|
SEQUENCE |
|
|
|
|
snIpxIfSapAccessPort |
INTEGER |
|
|
snIpxIfSapAccessDir |
INTEGER |
|
|
snIpxIfSapAccessFilterList |
OCTET STRING |
|
|
snIpxIfSapAccessRowStatus |
INTEGER |
|
SnIpxPortAddrEntry |
|
SEQUENCE |
|
|
|
|
snIpxPortAddrPort |
PortIndex |
|
|
snIpxPortAddrEncap |
INTEGER |
|
|
snIpxPortAddrNetNum |
NetNumber |
|
|
snIpxPortAddrRowStatus |
INTEGER |
|
|
snIpxPortAddrNetBiosFilterMode |
RtrStatus |
|
SnIpxPortCountersEntry |
|
SEQUENCE |
|
|
|
|
snIpxPortCountersPort |
PortIndex |
|
|
snIpxPortCountersRcvPktsCnt |
Counter |
|
|
snIpxPortCountersTxPktsCnt |
Counter |
|
|
snIpxPortCountersFwdPktsCnt |
Counter |
|
|
snIpxPortCountersRcvDropPktsCnt |
Counter |
|
|
snIpxPortCountersTxDropPktsCnt |
Counter |
|
|
snIpxPortCountersRcvFiltPktsCnt |
Counter |
|
|
snIpxPortCountersTxFiltPktsCnt |
Counter |
|
Defined Values
snIpxGen |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 |
OBJECT IDENTIFIER |
|
|
|
snIpxCache |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.2 |
OBJECT IDENTIFIER |
|
|
|
snIpxRoute |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.3 |
OBJECT IDENTIFIER |
|
|
|
snIpxServer |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.4 |
OBJECT IDENTIFIER |
|
|
|
snIpxPortAddr |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.11 |
OBJECT IDENTIFIER |
|
|
|
snIpxRoutingMode |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.1 |
Enabled/Disabled System IPX Routing Mode status. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RtrStatus |
|
|
snIpxNetBiosFilterMode |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.2 |
Enabled/Disabled NetBios Filter Mode status. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RtrStatus |
|
|
snIpxClearCache |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.3 |
clear(1) will clear cache table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
ClearStatus |
|
|
snIpxClearRoute |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.4 |
clear(1) will clear ipx route table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
ClearStatus |
|
|
snIpxClearTrafficCnts |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.5 |
clear(1) will clear ipx all traffic counters.
- snIpxRcvPktsCnt, snIpxFwdPktsCnt,
snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt,
snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
ClearStatus |
|
|
snIpxRcvPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.6 |
IPX incoming packets counter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
snIpxTxPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.7 |
IPX Outgoing packets counter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
snIpxFwdPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.8 |
IPX forwarding packets counter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
snIpxRcvDropPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.9 |
IPX receiving drop packets counter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
snIpxRcvFiltPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.10 |
IPX receiving filter packets counter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
snIpxRipGblFiltList |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.11 |
An IPX RIP Global Filter List. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..32) |
|
snIpxRipFiltOnAllPort |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12 |
Apply the IPX RIP Global filter list snIpxRipGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all RIP filter lists to/from all ports.
Prior to sending this command, snIpxRipGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is valid |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5) |
|
snIpxSapGblFiltList |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.13 |
An IPX SAP Global Filter List. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..32) |
|
snIpxSapFiltOnAllPort |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14 |
Apply the IPX SAP Global filter list snIpxSapGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all SAP filter lists to/from all ports.
Prior to sending this command, snIpxSapGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is valid |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5) |
|
snIpxTxDropPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.15 |
IPX transmitting drop packets counter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
snIpxTxFiltPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.16 |
IPX transmitting filter packets counter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
snIpxCacheEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1 |
An entry in the IPX Cache table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxCacheEntry |
|
|
snIpxCacheIndex |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.1 |
The table index for a IPX Cache entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxCacheNetNum |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.2 |
Cache Network number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NetNumber |
|
|
snIpxCacheNode |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.3 |
Cache Node Number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
snIpxCacheOutFilter |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.4 |
Cache Outbound Filter is ether disabled(0) or enabled(1). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
RtrStatus |
|
|
snIpxCacheEncap |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.5 |
The IPX encapsulation frame type. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ethernetII(1), ethernet8022(2), ethernet8023(3), ethernetSnap(4) |
|
snIpxCachePort |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.6 |
IPX Router Port number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PortIndex |
|
|
snIpxRouteEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1 |
An entry in the IPX route table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxRouteEntry |
|
|
snIpxRouteIndex |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.1 |
The table index for a IPX route entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxDestNetNum |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.2 |
Destination Network number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NetNumber |
|
|
snIpxFwdRouterNode |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.3 |
Forward Router Node Number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
snIpxDestHopCnts |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.4 |
Number of hops to reach the
destination. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxRouteMetric |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.5 |
The metrics to next hop router. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxDestPort |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.6 |
The destination port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxServerEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1 |
An entry in the IPX Server table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxServerEntry |
|
|
snIpxServerIndex |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.1 |
The table index for a IPX Server entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxServerType |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.2 |
IPX Server Type. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxServerNetNum |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.3 |
Server Network number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NetNumber |
|
|
snIpxServerNode |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.4 |
Server Node Number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PhysAddress |
|
|
snIpxServerSocket |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.5 |
Server Socket Number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxServerHopCnts |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.6 |
Number of intervening networks to reach the
server. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxServerName |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.7 |
IPX Server Name. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..47) |
|
snIpxFwdFilterEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1 |
An entry in the IPX Forward Filter table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxFwdFilterEntry |
|
|
snIpxFwdFilterId |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.1 |
The filter ID for a filter entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxFwdFilterAction |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.2 |
Action to take if the ipx packet match
with this filter. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Action |
|
|
snIpxFwdFilterSocket |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.3 |
IPX Forward Filter Socket Number. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxFwdFilterRowStatus |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8 |
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), valid(2), delete(3), create(4), modify(5) |
|
snIpxRipFilterEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1 |
An entry in the IPX RIP Filter table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxRipFilterEntry |
|
|
snIpxRipFilterId |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.1 |
The filter ID for a filter entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxRipFilterAction |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.2 |
Action to take if the ipx packet match
with this filter. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Action |
|
|
snIpxRipFilterNet |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.3 |
IPX RIP Filter Network number. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
NetNumber |
|
|
snIpxRipFilterMask |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.4 |
IPX RIP Filter Network/Subnet Mask. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
NetNumber |
|
|
snIpxRipFilterRowStatus |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5 |
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), valid(2), delete(3), create(4), modify(5) |
|
snIpxSapFilterEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1 |
An entry in the IPX SAP Filter table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxSapFilterEntry |
|
|
snIpxSapFilterId |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.1 |
The filter ID for a filter entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxSapFilterAction |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.2 |
Action to take if the ipx packet match
with this filter. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Action |
|
|
snIpxSapFilterType |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.3 |
IPX SAP Filter type to be matched. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxSapFilterName |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.4 |
IPX SAP Filter Name. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..47) |
|
snIpxSapFilterRowStatus |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5 |
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), valid(2), delete(3), create(4), modify(5) |
|
snIpxIfFwdAccessEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1 |
An entry in the IPX Forward Access table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxIfFwdAccessEntry |
|
|
snIpxIfFwdAccessPort |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.1 |
The IPX interface to which the Forward Filter applies. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxIfFwdAccessDir |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.2 |
The access direction of incoming packet filter
or outgoing packet filter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
in(1), out(2) |
|
snIpxIfFwdAccessFilterList |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.3 |
An IPX IF Forward Filter List. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..32) |
|
snIpxIfFwdAccessRowStatus |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.4 |
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), valid(2), delete(3), create(4), modify(5) |
|
snIpxIfRipAccessEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1 |
An entry in the IPX Forward Access table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxIfRipAccessEntry |
|
|
snIpxIfRipAccessPort |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.1 |
The IPX interface to which the RIP Filter applies. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxIfRipAccessDir |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.2 |
The access direction of incoming packet filter
or outgoing packet filter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
in(1), out(2) |
|
snIpxIfRipAccessFilterList |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.3 |
An IPX IF RIP Access Filter List. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..32) |
|
snIpxIfRipAccessRowStatus |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.4 |
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), valid(2), delete(3), create(4), modify(5) |
|
snIpxIfSapAccessEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1 |
An entry in the IPX Forward Access table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxIfSapAccessEntry |
|
|
snIpxIfSapAccessPort |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.1 |
The IPX interface to which the SAP Filter applies. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
snIpxIfSapAccessDir |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.2 |
The access direction of incoming packet filter
or outgoing packet filter. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
in(1), out(2) |
|
snIpxIfSapAccessFilterList |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.3 |
An IPX IF SAP Access Filter List. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(1..32) |
|
snIpxIfSapAccessRowStatus |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.4 |
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), valid(2), delete(3), create(4), modify(5) |
|
snIpxPortAddrEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1 |
An entry in the IPX Port Address table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxPortAddrEntry |
|
|
snIpxPortAddrPort |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.1 |
The port index for port address entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PortIndex |
|
|
snIpxPortAddrEncap |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.2 |
The IPX encapsulation type.
ethernet8022(1), ethernet8023(2),
ethernetII(3), ethernetSnap(4)
Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
a SNMP-SET error will be returned. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ethernet8022(1), ethernet8023(2), ethernetII(3), ethernetSnap(4) |
|
snIpxPortAddrNetNum |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.3 |
An unique Network number for the IPX interface port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
NetNumber |
|
|
snIpxPortAddrRowStatus |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.4 |
This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), valid(2), delete(3), create(4), modify(5) |
|
snIpxPortAddrNetBiosFilterMode |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.5 |
Enabled/Disabled NetBios Filter Mode status per Port Address entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RtrStatus |
|
|
snIpxPortCountersEntry |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1 |
An entry in the IPX Port Counters table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnIpxPortCountersEntry |
|
|
snIpxPortCountersPort |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.1 |
The port index for port Counters entry. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
PortIndex |
|
|
snIpxPortCountersRcvPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.2 |
IPX incoming packets counter for the interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
snIpxPortCountersTxPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.3 |
IPX Outgoing packets counter for the interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
snIpxPortCountersFwdPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.4 |
IPX forwarding packets counter for the interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
snIpxPortCountersTxFiltPktsCnt |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.8 |
IPX transmitting filter packets counter for the interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|