HP-VSF-VC-MIB

File: HP-VSF-VC-MIB.mib (43108 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF IF-MIB
SNMPv2-TC INET-ADDRESS-MIB Q-BRIDGE-MIB
SNMP-FRAMEWORK-MIB ENTITY-MIB NETSWITCH-MIB
HP-ICF-OID

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Integer32
Counter32 Unsigned32 TimeTicks
NOTIFICATION-TYPE OBJECT-GROUP MODULE-COMPLIANCE
NOTIFICATION-GROUP InterfaceIndexOrZero ifIndex
RowStatus TruthValue DisplayString
InetAddress InetAddressType PortList
SnmpAdminString PhysicalIndex hpSwitchBaseMACAddress
hpSwitch

Defined Types

HpicfVsfVCMemberEntry  
SEQUENCE    
  hpicfVsfVCMemberId Integer32
  hpicfVsfVCMemberProductId DisplayString
  hpicfVsfVCMemberMacAddr OCTET STRING
  hpicfVsfVCMemberShutdown TruthValue
  hpicfVsfVCMemberReboot TruthValue
  hpicfVsfVCMemberAdminPriority Integer32
  hpicfVsfVCMemberEntryStatus RowStatus
  hpicfVsfVCMemberEntPhysicalIndex PhysicalIndex
  hpicfVsfVCMemberState INTEGER
  hpicfVsfVCMemberProductName SnmpAdminString
  hpicfVsfVCMemberUpTime TimeTicks
  hpicfVsfVCMemberSysOid OBJECT IDENTIFIER
  hpicfVsfVCMemberIdForTrap Integer32
  hpicfVsfVCMemberSerialNum DisplayString
  hpicfVsfVCMemberBootRomVersion DisplayString
  hpicfVsfVCMemberOsVersion DisplayString
  hpicfVsfVCMemberBootImage INTEGER
  hpicfVsfVCMemberRenumber Integer32
  hpicfVsfVCMemberCpuUtil Integer32
  hpicfVsfVCMemberTotalMemory Integer32
  hpicfVsfVCMemberFreeMemory Integer32

HpicfVsfVCLinkEntry  
SEQUENCE    
  hpicfVsfVCLinkMemberId Integer32
  hpicfVsfVCLinkId Integer32
  hpicfVsfVCLinkName DisplayString
  hpicfVsfVCLinkOperStatus INTEGER
  hpicfVsfVCPeerMemberId Integer32
  hpicfVsfVCPeerLinkId Integer32
  hpicfVsfVCLinkPortList PortList
  hpicfVsfVCLinkEntryStatus RowStatus
  hpicfVsfVCLinkIdForTrap Integer32
  hpicfVsfVCLinkPortStartState INTEGER

HpicfVsfVCPortEntry  
SEQUENCE    
  hpicfVsfVCPortOperStatus INTEGER
  hpicfVsfVCPortOperStatusErrorStr DisplayString

Defined Values

hpicfVsfVCMIB 1.3.6.1.4.1.11.2.14.11.5.1.116
This MIB module describes the objects that are used to manage VSF Virtual Chassis feature.
MODULE-IDENTITY    

hpicfVsfVCNotifications 1.3.6.1.4.1.11.2.14.11.5.1.116.0
OBJECT IDENTIFIER    

hpicfVsfVCObjects 1.3.6.1.4.1.11.2.14.11.5.1.116.1
OBJECT IDENTIFIER    

hpicfVsfVCConfig 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1
OBJECT IDENTIFIER    

hpicfVsfVCStatus 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2
OBJECT IDENTIFIER    

hpicfVsfVCDomainId 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.1
The VSF virtual chassis domain ID uniquely identifies the VSF virtual chassis; all members of the virtual chassis have the same virtual chassis domain ID. The VSF virtual chassis domain ID is valid only when hpicfVsfVCSwitchAdminStatus is set to true (1). This value is set by the first elected commander of the VSF virtual chassis.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hpicfVsfVCOperStatus 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.2
This is the current operational status of the VSF virtual chassis.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unAvailable(0), disabled(1), active(2), fragmentInactive(3), fragmentActive(4)  

hpicfVsfVCAdminStatus 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.3
The administrative status of the VSF virtual chassis. When set to enable (1), this object enables VSF on the switch and on the discovered members. Setting this to disable (2) disables VSF only on the standalone switch. Enabling or disabling VSF triggers a reboot of the VSF switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpicfVsfVCTopology 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.4
This object describes the physical topology of the VSF virtual chassis.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), chain(1), ring(2), mesh(3), partialMesh(4)  

hpicfVsfVCTrapEnable 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.5
This object controls the ability of the VSF virtual chassis to send traps.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpicfVsfVCOobmMADEnable 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.6
This object enables the VSF OOBM MAD (Multi-Active Detection) feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpicfVsfLldpMADEnable 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.7
This object enables the VSF LLDP MAD (Multi-Active Detection) feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpicfVsfVCLldpMADDeviceIpType 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.8
This object provides the address type of the VSF LLDP MAD (Multi-Active Detection)device.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

hpicfVsfVCLldpMADDeviceIpAddr 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.9
This object provides the IPv4/IPv6 address of the VSF LLDP MAD (Multi-Active Detection) device.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

hpicfVsfVCLldpMADSnmpVersion 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.10
This object provides the VSF LLDP MAD (Multi-Active Detection) SNMP version.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER v2c(2)  

hpicfVsfVCLldpMADSnmpCommunity 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.11
This object provides the VSF LLDP MAD (Multi-Active Detection) SNMP community-string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hpicfVsfMADVlan 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.12
This object configures the VLAN as a Multi-Active Detection (MAD) VLAN. The MAD VLAN will be used to send and receive discovery packets to detect virtual chassis fragments in case of a split. The default value (0) of the object indicates that no MAD VLAN is currently configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4094  

hpicfVsfMADVlanConnectivity 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.13
This object indicates the connectivity state of Multi- Active-Detection (MAD) VLAN. none (1) - When the MAD VLAN does not have any operational port in all member switches. full (2) - When the MAD VLAN has one up port in all member switches. partial (3) - When the MAD VLAN has some up ports but does not have an operational port in all member switches.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), full(2), partial(3)  

hpicfVsfVCPortSpeed 1.3.6.1.4.1.11.2.14.11.5.1.116.1.1.14
This object is used to set the speed of all VSF ports. If this object is not set, it is automatically set to the maximum speed of the first link port added to the VSF. The value none(0) indicates that no VSF links have been added so the speed is unknown.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), oneGbps(1), tenGbps(2), fortyGbps(3)  

hpicfVsfVCLldpMADReadinessStatus 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.1
This object indicates the readiness state of VSF LLDP MAD (Multi-Active Detection).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), success(1), failure(2)  

hpicfVsfVCLldpMADDeviceMAC 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.2
This object indicates the MAC address of the VSF LLDP MAD (Multi-Active Detection) helper-device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0|6)  

hpicfVsfVCLldpMADVlanId 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.3
This object indicates the VLAN-ID of the domain on which the VSF LLDP MAD (Multi-Active Detection) helper-device resides.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4095  

hpicfVsfVCLldpMADTrunkIfIndex 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.4
This object indicates the trunk ifIndex of the interface on the VSF device that is connected to the VSF LLDP MAD (Multi-Active Detection) helper-device.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

hpicfVsfVCLldpMADProbePortSet 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.5
This object indicates the list of physical ports on the VSF LLDP MAD (Multi-Active Detection) helper-device that will be probed for operational status during MAD probe.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

hpicfVsfVCLldpMADConnectivity 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.6
This object indicates the reachability state of the VSF LLDP MAD (Multi-Active Detection) helper-device. none (1) - When there is no connectivity to the LLDP MAD helper-device. full (2) - When the LAG has at least one physical port in the enabled state on every VSF member switch. partial (3) - When the LAG does not have at least one enabled VSF physical port on every VSF member switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), full(2), partial(3)  

hpicfVsfVCLldpMADSplitStatus 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.7
This object indicates the VSF LLDP MAD (Multi-Active Detection) split status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hpicfVsfVCLldpMADProbeOriginator 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.8
This object indicates whether the VSF fragment is running the VSF LLDP MAD (Multi-Active Detection) probe or not.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hpicfVsfVCLldpMADProbeRequestsSent 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.9
This is the number of SNMP queries sent to the VSF LLDP MAD (Multi-Active Detection) helper-device.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfVsfVCLldpMADProbeResponseRcvd 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.10
This is the number of SNMP responses received from the VSF LLDP MAD (Multi-Active Detection) helper-device.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hpicfVsfVCLldpMADActiveFragment 1.3.6.1.4.1.11.2.14.11.5.1.116.1.2.11
This object specifies whether this VSF fragment is the active or an inactive fragment.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hpicfVsfVCMemberTable 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3
This table contains information about the VSF virtual chassis members.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfVsfVCMemberEntry

hpicfVsfVCMemberEntry 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1
A row in the VSF virtual chassis member table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfVsfVCMemberEntry  

hpicfVsfVCMemberId 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.1
This object describes the VSF virtual chassis member ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

hpicfVsfVCMemberProductId 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.2
This object describes the type of VSF member-switch.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString  

hpicfVsfVCMemberMacAddr 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.3
This object specifies the VSF member-switch MAC address.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0|6)  

hpicfVsfVCMemberShutdown 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.4
When this object is set to true (1) for a specific active-member VSF virtual chassis switch, that switch will shut down. Setting the object to false (2) has no effect. This object cannot be set to true (1) if the specified member is an VSF commander. If the VSF member is in standby mode, a new standby switch is chosen. The VSF member shutdown is prevented if it will cause a virtual chassis split.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpicfVsfVCMemberReboot 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.5
When set to true (1), this object will reboot the VSF member-switch. Setting the object to false (2) has no effect. Reboot is prevented if it will cause a virtual chassis split.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

hpicfVsfVCMemberAdminPriority 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.6
This object allows the user to set the priority of a switch when VSF is enabled on it.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..255  

hpicfVsfVCMemberEntryStatus 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.7
This object indicates the row status of an VSF virtual chassis-member entry. If the VSF member ID corresponds to an VSF commander, the row cannot be destroyed. For active switches, if hpicfVsfVCMemberReboot is set to true (1), and the row status is set to destroy (6), the switch comes up with a default configuration and acquires a new hpicfVsfVCMemberId.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpicfVsfVCMemberEntPhysicalIndex 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.8
This object specifies the entPhysicalTable (rfc2737) index of the VSF member.
Status: current Access: read-only
OBJECT-TYPE    
  PhysicalIndex  

hpicfVsfVCMemberState 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.9
This object gives the status of the member-switch in the VSF virtual chassis. unusedId (0) - The member ID does not exist. missing (1) - An VSF virtual chassis member-switch is marked as missing when it becomes non-responsive. A lack of response from the switch means that either the virtual chassis link or the virtual chassis member has crashed. Note that it is possible to remove a missing member from the virtual chassis. Once removed, the missing member's configuration will be deleted from the virtual chassis configuration file. provision (2) - A member-switch that is not physically present but whose configuration is provisioned . commander (3) - The member-switch which is the commander of the VSF virtual chassis. standby (4) - The member-switch which is the standby of the VSF virtual chassis. member (5) - The member-switch that is a part of the VSF virtual chassis. shutdown (6) - The member-switch is in the shut down state. booting (7) - The member-switch is booting. communicationFailure (8)- The member-switch cannot be reached. incompatibleOS (9) - The member-switch is running with a different Operating System. unknownState (10) - The state of the member-switch cannot be determined. standbyBooting (11)- The standby switch is currently booting up. When the switch finishes booting, its state will change to standby (4).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unusedId(0), missing(1), provision(2), commander(3), standby(4), member(5), shutdown(6), booting(7), communicationFailure(8), incompatibleOS(9), unknownState(10), standbyBooting(11)  

hpicfVsfVCMemberProductName 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.10
The product name of the VSF member-switch.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

hpicfVsfVCMemberUpTime 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.11
This object provides the uptime of the VSF member-switch. This is different from the VSF chassis uptime.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

hpicfVsfVCMemberSysOid 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.12
This object provides the sysObjectId of the VSF member-switch.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

hpicfVsfVCMemberIdForTrap 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.13
The member ID used in trap notifications. This is the same value as hpicfVsfVCMemberId.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hpicfVsfVCMemberSerialNum 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.14
This object specifies the serial number of the VSF member-switch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hpicfVsfVCMemberBootRomVersion 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.15
This object specifies the boot-ROM version of the VSF member-switch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hpicfVsfVCMemberOsVersion 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.16
This object specifies the operating system version of the VSF member-switch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hpicfVsfVCMemberBootImage 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.17
This object specifies the boot image of the VSF member-switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

hpicfVsfVCMemberRenumber 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.18
This object specifies the new member ID to be assigned to this VSF virtual chassis member-switch.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hpicfVsfVCMemberCpuUtil 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.19
This object provides the percentage of CPU utilization of the VSF member-switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpicfVsfVCMemberTotalMemory 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.20
This object provides the total memory usage in bytes of the VSF member-switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpicfVsfVCMemberFreeMemory 1.3.6.1.4.1.11.2.14.11.5.1.116.1.3.1.21
This object provides the free memory available, in bytes, on the VSF member-switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpicfVsfVCLinkTable 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4
This table contains information about the VSF links. An VSF link is a logical interface for the connection between VSF member devices. To use an VSF link, you must bind at least one physical port to it. These ports are called 'VSF physical ports' or 'VSF Ports'. The physical ports assigned to an VSF link automatically form an aggregate VSF link. An VSF link goes down only if all of its members' physical ports are down.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfVsfVCLinkEntry

hpicfVsfVCLinkEntry 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1
A row in the VSF link table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfVsfVCLinkEntry  

hpicfVsfVCLinkMemberId 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1.1
This object is the member ID of the VSF virtual chassis to which this VSF link belongs.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

hpicfVsfVCLinkId 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1.2
This object indicates the link ID for this VSF entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4  

hpicfVsfVCLinkName 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1.3
This object indicates the VSF link name. The maximum allowed link name is 32 characters.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..100)  

hpicfVsfVCLinkOperStatus 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1.4
This object indicates the VSF link state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), disabled(3)  

hpicfVsfVCPeerMemberId 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1.5
This object indicates the peer-member ID to which the VSF link is connected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpicfVsfVCPeerLinkId 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1.6
This object indicates the VSF link ID of the peer-member to which this VSF link is connected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hpicfVsfVCLinkPortList 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1.7
This object indicates the list of physical ports belonging to this VSF link.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

hpicfVsfVCLinkEntryStatus 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1.8
This object indicates the row status of an VSF virtual chassis link entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hpicfVsfVCLinkIdForTrap 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1.9
This object indicates the VSF virtual chassis link ID used in trap notifications. This is the same value as hpicfVsfVCLinkId.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hpicfVsfVCLinkPortStartState 1.3.6.1.4.1.11.2.14.11.5.1.116.1.4.1.10
This object indicates whether ports should be enabled while creating the VSF virtual chassis link.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpicfVsfVCPortTable 1.3.6.1.4.1.11.2.14.11.5.1.116.1.5
This table contains information about the VSF virtual chassis physical ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfVsfVCPortEntry

hpicfVsfVCPortEntry 1.3.6.1.4.1.11.2.14.11.5.1.116.1.5.1
A row in the VSF port table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfVsfVCPortEntry  

hpicfVsfVCPortOperStatus 1.3.6.1.4.1.11.2.14.11.5.1.116.1.5.1.1
This object provides the VSF virtual chassis physical port state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), error(3), disabled(4), provisioned(5)  

hpicfVsfVCPortOperStatusErrorStr 1.3.6.1.4.1.11.2.14.11.5.1.116.1.5.1.2
This object provides an error message if hpicfVsfVCPortOperStatus returns the value error (3).
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hpicfVsfVCCommanderChange 1.3.6.1.4.1.11.2.14.11.5.1.116.0.2
This notification is generated when a new VSF commander first comes up. The notification is also sent when a failover happens, and the VSF standby becomes an VSF commander or when the VSF commander is down.
Status: current Access: read-only
NOTIFICATION-TYPE    

hpicfVsfVCMemberChange 1.3.6.1.4.1.11.2.14.11.5.1.116.0.3
This notification is generated when a new member joins the VSF virtual chassis or when a member switch is moved from the loose-provisioned state to the strict-provisioned state.
Status: current Access: read-only
NOTIFICATION-TYPE    

hpicfVsfVCMemberStatusChange 1.3.6.1.4.1.11.2.14.11.5.1.116.0.4
This notification is generated when an VSF member becomes active or inactive.
Status: current Access: read-only
NOTIFICATION-TYPE    

hpicfVsfVCConformance 1.3.6.1.4.1.11.2.14.11.5.1.116.2
OBJECT IDENTIFIER    

hpicfVsfVCCompliances 1.3.6.1.4.1.11.2.14.11.5.1.116.2.1
OBJECT IDENTIFIER    

hpicfVsfVCGroups 1.3.6.1.4.1.11.2.14.11.5.1.116.2.2
OBJECT IDENTIFIER    

hpicfVsfVCConfigScalarGroup 1.3.6.1.4.1.11.2.14.11.5.1.116.2.2.1
A collection of VSF virtual chassis scalar objects.
Status: deprecated Access: read-only
OBJECT-GROUP    

hpicfVsfVCMemberTableGroup 1.3.6.1.4.1.11.2.14.11.5.1.116.2.2.2
A collection of VSF virtual chassis member table objects.
Status: current Access: read-only
OBJECT-GROUP    

hpicfVsfVCLinkTableGroup 1.3.6.1.4.1.11.2.14.11.5.1.116.2.2.3
A collection of VSF virtual chassis link table objects.
Status: current Access: read-only
OBJECT-GROUP    

hpicfVsfVCNotificationsGroup 1.3.6.1.4.1.11.2.14.11.5.1.116.2.2.4
A collection of VSF virtual chassis notifications objects.
Status: current Access: read-only
NOTIFICATION-GROUP    

hpicfVsfVCStatusScalarGroup 1.3.6.1.4.1.11.2.14.11.5.1.116.2.2.5
A collection of VSF virtual chassis notifications objects.
Status: current Access: read-only
OBJECT-GROUP    

hpicfVsfVCPortTableGroup 1.3.6.1.4.1.11.2.14.11.5.1.116.2.2.6
A collection of VSF virtual chassis physical port objects.
Status: current Access: read-only
OBJECT-GROUP    

hpicfVsfVCConfigScalarGroup1 1.3.6.1.4.1.11.2.14.11.5.1.116.2.2.7
A collection of VSF virtual chassis scalar objects.
Status: current Access: read-only
OBJECT-GROUP    

hpicfVsfVCMibCompliance 1.3.6.1.4.1.11.2.14.11.5.1.116.2.1.1
The compliance statement for devices implementing the HP VSF VC Mib.
Status: deprecated Access: read-only
MODULE-COMPLIANCE    

hpicfVsfVCMibCompliance1 1.3.6.1.4.1.11.2.14.11.5.1.116.2.1.2
The compliance statement for devices implementing the HP VSF VC Mib.
Status: current Access: read-only
MODULE-COMPLIANCE