HPN-ICF-VSAN-MIB

File: HPN-ICF-VSAN-MIB.mib (24042 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	HPN-ICF-FC-TC-MIB
IF-MIB	HPN-ICF-OID-MIB

Imported symbols

OBJECT-TYPE	MODULE-IDENTITY	NOTIFICATION-TYPE
Counter32	RowStatus	TruthValue
HpnicfFcVsanIndex	HpnicfFcNameIdOrZero	HpnicfFcDomainPriority
HpnicfFcDomainId	HpnicfFcNameId	HpnicfFcDomainIdOrZero
HpnicfFcDmState	HpnicfFcDomainIdList	ifIndex
hpnicfCommon

Defined Types

HpnicfVsanEntry
SEQUENCE
	hpnicfVsanIndex	HpnicfFcVsanIndex
	hpnicfVsanCoreSwitchName	HpnicfFcNameIdOrZero
	hpnicfVsanRowStatus	RowStatus

HpnicfVsanDmEntry
SEQUENCE
	hpnicfVsanDmDomainConfigureEnable	TruthValue
	hpnicfVsanDmFabricNameConfigured	HpnicfFcNameIdOrZero
	hpnicfVsanDmPriorityConfigured	HpnicfFcDomainPriority
	hpnicfVsanDmAllowedDomainIdList	HpnicfFcDomainIdList
	hpnicfVsanDmDomainIdConfigured	HpnicfFcDomainIdOrZero
	hpnicfVsanDmDomainIdTypeConfigured	INTEGER
	hpnicfVsanDmAutoReconfigureEnable	TruthValue
	hpnicfVsanDmDomainRestart	INTEGER
	hpnicfVsanDmState	HpnicfFcDmState
	hpnicfVsanDmDomainIdAssigned	HpnicfFcDomainIdOrZero
	hpnicfVsanDmPrincipalSwitchWWN	HpnicfFcNameId
	hpnicfVsanDmLocalSwitchWWN	HpnicfFcNameId
	hpnicfVsanDmPrincipalSwRunPriority	HpnicfFcDomainPriority
	hpnicfVsanDmLocalSwRunPriority	HpnicfFcDomainPriority
	hpnicfVsanDmPrincipalSwSlctCnt	Counter32
	hpnicfVsanDmLocalPrincipalSwSlctCnt	Counter32
	hpnicfVsanDmBFCnt	Counter32
	hpnicfVsanDmRCFCnt	Counter32

HpnicfVsanDmIfConfigEntry
SEQUENCE
	hpnicfVsanDmIfConfigRcfReject	TruthValue

HpnicfVsanDmDatabaseEntry
SEQUENCE
	hpnicfVsanDmDatabaseDomainId	HpnicfFcDomainId
	hpnicfVsanDmDatabaseSwitchWWN	HpnicfFcNameId

HpnicfVsanDmIfInfoEntry
SEQUENCE
	hpnicfVsanDmIfInfoRole	INTEGER

Defined Values

hpnicfSan		1.3.6.1.4.1.11.2.14.11.15.2.127
This MIB module is for configuring and monitoring VSAN and domain management related entities.
MODULE-IDENTITY

hpnicfVsan		1.3.6.1.4.1.11.2.14.11.15.2.127.1
OBJECT IDENTIFIER

hpnicfVsanMibObjects		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1
OBJECT IDENTIFIER

hpnicfVsanDmConfiguration		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1
OBJECT IDENTIFIER

hpnicfVsanTable		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1
A table contains all the VSANs configured on the device. It can be used to manage and monitor the VSANs on local device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfVsanEntry

hpnicfVsanEntry		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1
An entry that contains information about a VSAN in the hpnicfVsanTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfVsanEntry

hpnicfVsanIndex		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1.1
The identifier of the VSAN.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	HpnicfFcVsanIndex

hpnicfVsanCoreSwitchName		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1.2
The Core Switch_Name of the VSAN, which is indicated by the switch's WWN(World Wide Name).
Status: current	Access: read-only
OBJECT-TYPE
	HpnicfFcNameIdOrZero	Size(8\|16)

hpnicfVsanRowStatus		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1.3
RowStatus. Now only three states are supported: createAndGo, active, and destroy.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

hpnicfVsanDmTable		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2
A table contains domain management related configurations and information of VSANs. An entry in this table is created when corresponding VSAN is created, as well as deleted when the VSAN is deleted.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfVsanDmEntry

hpnicfVsanDmEntry		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1
An entry of domain management related configurations and information of a specified VSAN.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfVsanDmEntry

hpnicfVsanDmDomainConfigureEnable		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.1
To enable or disable the fabric configuration function in this VSAN. true: enabled, the fabric will be built dynamically. false: disabled, the fabric should be built statically by manual configurations.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfVsanDmFabricNameConfigured		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.2
Specifies the fabric name in this VSAN, and will use a zero-length octet string as default value if not configured. The fabric name specified here takes effect only if the value of hpnicfVsanDmDomainConfigureEnable is 'false', and the same fabric name should be configured for all switches in this VSAN. If the value of hpnicfVsanDmDomainConfigureEnable is 'true', the principal switch WWN is used as fabric name. The value should be set to zero-length when canceling a configured fabric name.
Status: current	Access: read-write
OBJECT-TYPE
	HpnicfFcNameIdOrZero

hpnicfVsanDmPriorityConfigured		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.3
Specifies the priority of a switch in this VSAN, which is used during principal switch selection to cause one Switch to be favored over another.
Status: current	Access: read-write
OBJECT-TYPE
	HpnicfFcDomainPriority

hpnicfVsanDmAllowedDomainIdList		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.4
Specifies the list of domain IDs that are allowed in the VSAN, and the configuration has different meanings in different scenarios: 1. Principal switch: Can only assign domains IDs within the allowed domain ID list. If the allowed domain ID list configured does not include any of the already assigned domain IDs or manually configured domain IDs, the configuration will fail. 2. Non-principal switch: The manually configured domain ID must be within the allowed domain ID list, or the configuration will fail. Besides, the domain ID assigned by principal switch must within the allowed domain ID list, or the switch will refuse the assigned domain ID and isolate the upstream interface. If the runtime domain ID for a switch is beyond the new configured ID list, the configuration will fail. The default value is a zero-length octet string. If This value is set with zero-length, the configuration will be cancelled in this VSAN.
Status: current	Access: read-write
OBJECT-TYPE
	HpnicfFcDomainIdList

hpnicfVsanDmDomainIdConfigured		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.5
Used to configure or cancel a domain ID for a switch in this VSAN. When this value is not zero, the domain ID type should be specified together via hpnicfVsanDmDomainIdTypeConfigured, or the default value of preferred type will be taken. The zero value is used to cancel the domain ID configured, and then, there is no need to specify its type. When statically build a fabric, the configured domain ID is the actual domain ID of the switch. If this object is not manually configured, the switch will isolate all of its E_ports in this VSAN no matter what domain ID type is configured. When dynamically build a fabric, the configured domain ID is desired by the switch, but the domain ID assigned to the switch may not be the desired one. If a non-principal switch fails to obtain any domain ID from the principal switch, the non-principal switch will isolate the upstream link. If a non-principal switch obtains a domain ID from the principal switch other than the desired one, different actions will be taken according to different domain ID type configured: - If configured static type, The non-principal switch will isolate the upstream link and refuse other domain IDs assigned by the principal switch. - If configured preferred type, the non-principal switch will use the domain ID assigned by the principal switch.
Status: current	Access: read-write
OBJECT-TYPE
	HpnicfFcDomainIdOrZero

hpnicfVsanDmDomainIdTypeConfigured		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.6
Specifies the type of configured domain ID, which can be static type or preferred type.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	static(1), preferred(2)

hpnicfVsanDmAutoReconfigureEnable		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.7
Used to specify whether a disruptive reconfiguration will be automatically performed when the domain ID lists overlaps in fabric merging. The fabric reconfiguration function takes effect only when the value of hpnicfVsanDmDomainConfigureEnable is 'true'.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfVsanDmDomainRestart		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.8
Used to manually trigger a disruptive or non-disruptive reconfiguration of the fabric.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	noOperation(1), nonDisruptive(2), disruptive(3)

hpnicfVsanDmState		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.9
Indicates the managing state of the domain in this VSAN.
Status: current	Access: read-only
OBJECT-TYPE
	HpnicfFcDmState

hpnicfVsanDmDomainIdAssigned		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.10
Indicates the Domain ID of the local switch in this VSAN or zero if no Domain ID has been assigned.
Status: current	Access: read-only
OBJECT-TYPE
	HpnicfFcDomainIdOrZero

hpnicfVsanDmPrincipalSwitchWWN		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.11
Indicates the WWN of the principal switch in this VSAN, or zero-length string if the identity of the principal switch is unknown.
Status: current	Access: read-only
OBJECT-TYPE
	HpnicfFcNameId

hpnicfVsanDmLocalSwitchWWN		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.12
Indicates the WWN of the local switch in this VSAN.
Status: current	Access: read-only
OBJECT-TYPE
	HpnicfFcNameId

hpnicfVsanDmPrincipalSwRunPriority		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.13
Indicates the running priority of the principal switch in this VSAN.
Status: current	Access: read-only
OBJECT-TYPE
	HpnicfFcDomainPriority

hpnicfVsanDmLocalSwRunPriority		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.14
Indicates the running priority of the local switch in this VSAN.
Status: current	Access: read-only
OBJECT-TYPE
	HpnicfFcDomainPriority

hpnicfVsanDmPrincipalSwSlctCnt		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.15
The times that local switch has participated in principal switch selection in this VSAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfVsanDmLocalPrincipalSwSlctCnt		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.16
The times that local switch was elected as principal switch in this VSAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfVsanDmBFCnt		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.17
The times that local switch has participated in a BF(Build Fabric) process in this VSAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfVsanDmRCFCnt		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.18
The times that local switch has participated in a RCF (Reconfigure Fabric) process in this VSAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hpnicfVsanDmIfConfigTable		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.3
A table contains the FC(Fibre Channel) related interface configurations about domain management of a VSAN.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfVsanDmIfConfigEntry

hpnicfVsanDmIfConfigEntry		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.3.1
An entry used for managing the FC related interface configurations about domain management of a VSAN. An entry can be created when any object in this table is set to non-default value, and be deleted when the objects in this table are set to default value.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfVsanDmIfConfigEntry

hpnicfVsanDmIfConfigRcfReject		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.3.1.1
Used to specify whether the RCF(Reconfigure Fabric) requests received in this VSAN should be rejected. - true: the received RCF will be rejected. - false: the received RCF will be accepted.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfVsanDmInformation		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2
OBJECT IDENTIFIER

hpnicfVsanDmDatabaseTable		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1
A table specifies the information of the switch about all the Domain IDs which have been assigned in each of the VSANs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfVsanDmDatabaseEntry

hpnicfVsanDmDatabaseEntry		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1.1
An object in the hpnicfVsanDmDatabaseTable contains one Domain ID and the corresponding WWN of the switch in one VSAN.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfVsanDmDatabaseEntry

hpnicfVsanDmDatabaseDomainId		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1.1.1
The Domain ID which has been assigned.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfFcDomainId

hpnicfVsanDmDatabaseSwitchWWN		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1.1.2
The WWN of the switch to which the corresponding Domain ID has been assigned in the particular VSAN.
Status: current	Access: read-only
OBJECT-TYPE
	HpnicfFcNameId

hpnicfVsanDmIfInfoTable		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.2
A table specifies the information of an interface in each of the VSANs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HpnicfVsanDmIfInfoEntry

hpnicfVsanDmIfInfoEntry		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.2.1
A conceptual row in the hpnicfVsanDmIfInfoTable indicates the role information of the interface in the particular VSAN.
Status: current	Access: not-accessible
OBJECT-TYPE
	HpnicfVsanDmIfInfoEntry

hpnicfVsanDmIfInfoRole		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.2.1.1
The role of the interface in the VSAN. The value specifications are listed as follows: nonPrincipal - The state of the interface is not principal interface in the VSAN. principalUpstream - The state of the interface is upstream principal interface in the VSAN. principalDownstream - The state of the interface is downstream principal interface in the VSAN. isolated - The state of the interface is isolated in the VSAN. unknown - The state of the interface is unknown in the VSAN.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nonPrincipal(1), principalUpstream(2), principalDownstream(3), isolated(4), unknown(5)

hpnicfVsanDmNotifications		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3
OBJECT IDENTIFIER

hpnicfVsanDmNotificationPrefix		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0
OBJECT IDENTIFIER

hpnicfVsanDmDomainIdNotAssignedNotify		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0.1
This event will be triggered if a Domain ID is not assigned or configured, then the E_ports may be isolated in the VSAN. The conditions are listed as follows: 1. If the switch has enabled the fabric configuration and a request for a configured static Domain ID is rejected or no other Domain ID is assigned, the E_ports will be isolated in the particular VSAN. 2. If the switch does not enable the fabric configuration and a Domain ID is not configured, all of its E_ports will be isolated in the particular VSAN. The notification contains the WWN of the Switch and the index of the VSAN in which the event occurred.
Status: current	Access: read-only
NOTIFICATION-TYPE

hpnicfVsanDmNewPrincipalSwitchNotify		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0.2
If a switch becomes the new Principal Switch in a VSAN, this notification is sent immediately after the election. The notification contains the WWN of the new Principal Switch and the index of the VSAN in which the transition occurred.
Status: current	Access: read-only
NOTIFICATION-TYPE

hpnicfVsanDmFabricChangeNotify		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0.3
This event will be triggered if a switch sends or receives a Build Fabric (BF) or a Reconfigure Fabric (RCF) message in a VSAN. The conditions a switch can receive or send a BF or a RCF are listed as follows: 1. Two isolated fabrics in a VSAN merge into one fabric. If the Domain ID lists do not overlap, the sent or received message is BF, other cases, it is RCF. 2. If an upstream principal link which connects to principal switch and other switches become disconnected, the sent or received message is BF. 3. A BF or RCF process is triggered manually by configuration. The notification contains the index of the VSAN in which a BF or a RCF was sent or received.
Status: current	Access: read-only
NOTIFICATION-TYPE

hpnicfVsanDmDomainIdChangeNotify		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0.4
This event will be triggered if the Domain ID of the local switch changed in a VSAN.
Status: current	Access: read-only
NOTIFICATION-TYPE

hpnicfVsanDmNotificationSwitch		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.1
OBJECT IDENTIFIER

hpnicfVsanDmFabricChangeNotifyEnable		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.1.1
Specifies whether the hpnicfVsanDmFabricChangeNotify can be sent when a BF or RCF message was sent or received by a switch.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

hpnicfVsanDmDomainIdChangeNotifyEnable		1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.1.2
Specifies whether the hpnicfVsanDmDomainIdChangeNotify can be sent when the Domain ID of the local switch changed in a VSAN.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue