HPNSAHOTSWAPSUBSYSTEM-MIB

File: HPNSAHOTSWAPSUBSYSTEM-MIB.mib (17002 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises DisplayString OBJECT-TYPE

Defined Types

HPnsaHotSwapAgentEntry  
SEQUENCE    
  hpnsaHSAgentIndex INTEGER
  hpnsaHSAgentName DisplayString
  hpnsaHSAgentVersion DisplayString
  hpnsaHSAgentDate OCTET STRING

HpnsaHotSwapModuleEntry  
SEQUENCE    
  hpnsaHSModuleIndex INTEGER
  hpnsaHSModuleScsiCableType INTEGER
  hpnsaHSModuleTempStatus INTEGER
  hpnsaHSModuleSwitchState INTEGER
  hpnsaHSModuleDeviceStartup INTEGER
  hpnsaHSModuleMiddleDrvAddr INTEGER
  hpnsaHSModuleHi8ScsiAddr INTEGER

HpnsaHotSwapDevEntry  
SEQUENCE    
  hpnsaHSDevModuleIndex INTEGER
  hpnsaHSDevIndex INTEGER
  hpnsaHSDevExistence INTEGER
  hpnsaHSDevScsiAddr INTEGER
  hpnsaHSDevPowerStatus INTEGER

Defined Values

hp 1.3.6.1.4.1.11
OBJECT IDENTIFIER    

nm 1.3.6.1.4.1.11.2
OBJECT IDENTIFIER    

hpnsa 1.3.6.1.4.1.11.2.23
OBJECT IDENTIFIER    

hpnsaHotSwap 1.3.6.1.4.1.11.2.23.20
OBJECT IDENTIFIER    

hpnsaHSMibRev 1.3.6.1.4.1.11.2.23.20.1
OBJECT IDENTIFIER    

hpnsaHSAgent 1.3.6.1.4.1.11.2.23.20.2
OBJECT IDENTIFIER    

hpnsaHSModule 1.3.6.1.4.1.11.2.23.20.3
OBJECT IDENTIFIER    

hpnsaHSDev 1.3.6.1.4.1.11.2.23.20.4
OBJECT IDENTIFIER    

hpnsaHSMibRevMajor 1.3.6.1.4.1.11.2.23.20.1.1
The major revision level of the MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

hpnsaHSMibRevMinor 1.3.6.1.4.1.11.2.23.20.1.2
The minor revision level of the MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

hpnsaHSAgentTable 1.3.6.1.4.1.11.2.23.20.2.1
A table of SNMP Agents that satisfy requests for this MIB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HPnsaHotSwapAgentEntry

hpnsaHSAgentEntry 1.3.6.1.4.1.11.2.23.20.2.1.1
A description of the agents that access Hot Swap Subsystem
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HPnsaHotSwapAgentEntry  

hpnsaHSAgentIndex 1.3.6.1.4.1.11.2.23.20.2.1.1.1
A unique index for this module description.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

hpnsaHSAgentName 1.3.6.1.4.1.11.2.23.20.2.1.1.2
Name of the Agent/Agents satisfying SNMP requests for this MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

hpnsaHSAgentVersion 1.3.6.1.4.1.11.2.23.20.2.1.1.3
Version number of the Agent/Agents satisfying SNMP requests for this MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..5)  

hpnsaHSAgentDate 1.3.6.1.4.1.11.2.23.20.2.1.1.4
The date on which this Agent was created. field octets contents range _________________________________________________ 1 1 years since 1900 0..255 2 2 month 1..12 3 3 day 1..31 4 4 hour 0..23 5 5 minute 0..59 6 6 second 0..59
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

hpnsaHSModuleTable 1.3.6.1.4.1.11.2.23.20.3.1
A table of Hot Swap Subsystem module information entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnsaHotSwapModuleEntry

hpnsaHSModuleEntry 1.3.6.1.4.1.11.2.23.20.3.1.1
Hot Swap Subsystem module information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HpnsaHotSwapModuleEntry  

hpnsaHSModuleIndex 1.3.6.1.4.1.11.2.23.20.3.1.1.1
A unique index for the Hot Swap module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hpnsaHSModuleScsiCableType 1.3.6.1.4.1.11.2.23.20.3.1.1.2
The SCSI cable type attached to the backplane on the right side a Hot Swap Subsystem cage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER wide(1), narrow(2), error(3), no-cable(4)  

hpnsaHSModuleTempStatus 1.3.6.1.4.1.11.2.23.20.3.1.1.3
Status of the Hot Swap Subsystem's temperature sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER error(1), normal(2), warning(3), emergency(4)  

hpnsaHSModuleSwitchState 1.3.6.1.4.1.11.2.23.20.3.1.1.4
Status of the DIP switches on the Hot Swap Subsystem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

hpnsaHSModuleDeviceStartup 1.3.6.1.4.1.11.2.23.20.3.1.1.5
State of the Disk Spin Up DIP switch on the Hot Swap Subsystem. 1 = disks spin up with the system after a period of time 2 = disks spin up after receiving SCSI Start Command
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER at-poweron(1), by-start-command(2)  

hpnsaHSModuleMiddleDrvAddr 1.3.6.1.4.1.11.2.23.20.3.1.1.6
State of the Middle Drive Address DIP switch on the Hot Swap Subsystem. 1 = lowest value, either 0 or 8 depending on High Eight Address 2 = default, either 2 or 10 depending on High Eight Address
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lowest(1), default(2)  

hpnsaHSModuleHi8ScsiAddr 1.3.6.1.4.1.11.2.23.20.3.1.1.7
State of the High Eight SCSI Address DIP switch on the Hot Swap Subsystem. 1 = SCSI address range from 1 to 7 2 = SCSI address range from 9 to 15
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER hi-range-9to15(1), lo-range-1to7(2)  

hpnsaHSDevTable 1.3.6.1.4.1.11.2.23.20.4.1
A table of Hot Swap Subsystem device information entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpnsaHotSwapDevEntry

hpnsaHSDevEntry 1.3.6.1.4.1.11.2.23.20.4.1.1
Hot Swap Subsystem device information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  HpnsaHotSwapDevEntry  

hpnsaHSDevModuleIndex 1.3.6.1.4.1.11.2.23.20.4.1.1.1
A unique index for the Hot Swap module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

hpnsaHSDevIndex 1.3.6.1.4.1.11.2.23.20.4.1.1.2
Physical device number in the Hot Swap Module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hpnsaHSDevExistence 1.3.6.1.4.1.11.2.23.20.4.1.1.3
Defines whether a device exists in the physical slot of the Hot Swap Subsystem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER present(1), not-present(2)  

hpnsaHSDevScsiAddr 1.3.6.1.4.1.11.2.23.20.4.1.1.4
SCSI address of the device in the physical slot of the Hot Swap Subsystem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

hpnsaHSDevPowerStatus 1.3.6.1.4.1.11.2.23.20.4.1.1.5
Defines whether the power connector of a particular device in the Hot Swap Subsystem is connected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-connected(1), connected(2)  

hpnsaHSPwrAlertDelay 1.3.6.1.4.1.11.2.23.20.4.2
Set this variable to non-zero integer value to skip checking the power connection state of Starfish device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535