HPOTHERTRAP-MIB
File:
HPOTHERTRAP-MIB.mib (176880 bytes)
Imported modules
Imported symbols
Defined Values
hp |
1.3.6.1.4.1.11 |
OBJECT IDENTIFIER |
|
|
|
adaptec |
1.3.6.1.4.1.795 |
OBJECT IDENTIFIER |
|
|
|
nm |
1.3.6.1.4.1.11.2 |
OBJECT IDENTIFIER |
|
|
|
hpnsa |
1.3.6.1.4.1.11.2.23 |
OBJECT IDENTIFIER |
|
|
|
hpnsaECC |
1.3.6.1.4.1.11.2.23.6 |
OBJECT IDENTIFIER |
|
|
|
adaptecNm |
1.3.6.1.4.1.795.4 |
OBJECT IDENTIFIER |
|
|
|
hpnr |
1.3.6.1.4.1.16 |
OBJECT IDENTIFIER |
|
|
|
raidTraps |
1.3.6.1.4.1.16.1.1.200 |
OBJECT IDENTIFIER |
|
|
|
aac |
1.3.6.1.4.1.795.10.1 |
OBJECT IDENTIFIER |
|
|
|
aac-hpn |
1.3.6.1.4.1.795.10.1.50 |
OBJECT IDENTIFIER |
|
|
|
cyclone |
1.3.6.1.4.1.795.2.5 |
OBJECT IDENTIFIER |
|
|
|
cycTraps |
1.3.6.1.4.1.795.2.5.9000 |
OBJECT IDENTIFIER |
|
|
|
symbios |
1.3.6.1.4.1.1123 |
OBJECT IDENTIFIER |
|
|
|
scsi |
1.3.6.1.4.1.1123.3.1 |
OBJECT IDENTIFIER |
|
|
|
symc8xx |
1.3.6.1.4.1.1123.3.1.2 |
OBJECT IDENTIFIER |
|
|
|
symTrap |
1.3.6.1.4.1.1123.3.1.2.2 |
OBJECT IDENTIFIER |
|
|
|
eMylex1 |
1.3.6.1.4.1.1608 |
OBJECT IDENTIFIER |
|
|
|
eMylex2 |
1.3.6.1.4.1.1608.1 |
OBJECT IDENTIFIER |
|
|
|
eMylex3 |
1.3.6.1.4.1.1608.1.1 |
OBJECT IDENTIFIER |
|
|
|
eMylex4 |
1.3.6.1.4.1.1608.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
eMylex5 |
1.3.6.1.4.1.1608.1.1.1.9 |
OBJECT IDENTIFIER |
|
|
|
dmtfStd |
1.3.6.1.4.1.1608.1.1.1.9.1.1 |
OBJECT IDENTIFIER |
|
|
|
dmtfGroups |
1.3.6.1.4.1.1608.1.1.1.9.1.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
adaptecSCSI1 |
8193 |
Device Database has been corrupted. |
TRAP-TYPE |
|
|
|
adaptecSCSI2 |
18193 |
Device Database has been corrupted. |
TRAP-TYPE |
|
|
|
adaptecSCSI3 |
8194 |
SCSI Status agent was unloaded from a NetWare Server. |
TRAP-TYPE |
|
|
|
adaptecSCSI4 |
18194 |
SCSI Status agent was unloaded from a NetWare Server. |
TRAP-TYPE |
|
|
|
adaptecSCSI5 |
8196 |
One of the SCSI HBAs can no longer be detected by the SCSI Status agent. |
TRAP-TYPE |
|
|
|
adaptecSCSI6 |
18196 |
One of the SCSI HBAs can no longer be detected by the SCSI Status agent. |
TRAP-TYPE |
|
|
|
adaptecSCSI7 |
8197 |
A Host Adapter which has failed, has become accessible again. |
TRAP-TYPE |
|
|
|
adaptecSCSI8 |
18197 |
A Host Adapter which has failed, has become accessible again. |
TRAP-TYPE |
|
|
|
adaptecSCSI9 |
8198 |
A new SCSI Host Bus Adapter has been discovered or device database has been cleared. |
TRAP-TYPE |
|
|
|
adaptecSCSI10 |
18198 |
A new SCSI Host Bus Adapter has been discovered or device database has been cleared. |
TRAP-TYPE |
|
|
|
adaptecSCSI11 |
8199 |
One of the SCSI devices installed on the server can no longer be detected by the SCSI Status agent. |
TRAP-TYPE |
|
|
|
adaptecSCSI12 |
18199 |
One of the SCSI devices installed on the server can no longer be detected by the SCSI Status agent. |
TRAP-TYPE |
|
|
|
adaptecSCSI13 |
8200 |
A SCSI device which has failed, has become accessible again. |
TRAP-TYPE |
|
|
|
adaptecSCSI14 |
18200 |
A SCSI device which has failed, has become accessible again. |
TRAP-TYPE |
|
|
|
adaptecSCSI15 |
8201 |
A new SCSI device has been discovered. |
TRAP-TYPE |
|
|
|
adaptecSCSI16 |
18201 |
A new SCSI device has been discovered. |
TRAP-TYPE |
|
|
|
adaptecSCSI17 |
8205 |
The SCSI Status agent detected that the Host Bus Adapter has been changed. |
TRAP-TYPE |
|
|
|
adaptecSCSI18 |
18205 |
The SCSI Status agent detected that the Host Bus Adapter has been changed. |
TRAP-TYPE |
|
|
|
adaptecSCSI19 |
8208 |
The SCSI Status agent sent a request to an HBA and the request never completed. |
TRAP-TYPE |
|
|
|
adaptecSCSI20 |
18208 |
The SCSI Status agent sent a request to an HBA and the request never completed. |
TRAP-TYPE |
|
|
|
adaptecSCSI21 |
8206 |
The SCSI Status agent detected that a SCSI device installed on the server has been changed. |
TRAP-TYPE |
|
|
|
adaptecSCSI22 |
18206 |
The SCSI Status agent detected that a SCSI device installed on the server has been changed. |
TRAP-TYPE |
|
|
|
adaptecSCSI23 |
8209 |
The SCSI Status agent sent a request to a SCSI device and the request never completed. |
TRAP-TYPE |
|
|
|
adaptecSCSI24 |
18209 |
The SCSI Status agent sent a request to a SCSI device and the request never completed. |
TRAP-TYPE |
|
|
|
aSR1 |
20752 |
Server has been restarted after the system watchdog timer has timed out due to NOS being hung |
TRAP-TYPE |
|
|
|
aSR2 |
20753 |
OS Watchdog Shutdown |
TRAP-TYPE |
|
|
|
aSR3 |
20754 |
OS Watchdog poweroff |
TRAP-TYPE |
|
|
|
aSR4 |
220752 |
Server has been restarted after the system watchdog timer has timed out due to NOS being hung |
TRAP-TYPE |
|
|
|
aSR5 |
320752 |
Server has not been restarted after the system watchdog timer has timed out due to NOS being hung |
TRAP-TYPE |
|
|
|
aSR6 |
420752 |
Server has been powered down after the system watchdog timer has timed out due to NOS being hung |
TRAP-TYPE |
|
|
|
aSR7 |
520752 |
Server has been power cycled after the system watchdog timer has timed out due to NOS being hung |
TRAP-TYPE |
|
|
|
aSR8 |
22624 |
The System has been reset by the microcontroller firmware because watchdog timer expired. |
TRAP-TYPE |
|
|
|
fibreChannel5 |
20759 |
The Fibre Channel Adapter is Online |
TRAP-TYPE |
|
|
|
fibreChannel6 |
20760 |
The Fibre Channel Adapter is Offline |
TRAP-TYPE |
|
|
|
hPDiskSystem1 |
8210 |
The Defect List Threshold has been exceeded. |
TRAP-TYPE |
|
|
|
hPECCMemory10 |
220592 |
System memory size reduced due to error in memory slot |
TRAP-TYPE |
|
|
|
hPECCMemory2 |
24353 |
A single-bit error has been corrected in one of the memory modules. |
TRAP-TYPE |
|
|
|
hPECCMemory3 |
24354 |
Predictive failure in a memory module |
TRAP-TYPE |
|
|
|
hPECCMemory7 |
24357 |
A Multiple-bit error has occurred in one of the memory modules |
TRAP-TYPE |
|
|
|
hPECCMemory11 |
4360 |
ECC error corrected in memory module |
TRAP-TYPE |
|
|
|
hPECCMemory12 |
4361 |
Uncorrectable multi-bit ECC error has occurred in memory module |
TRAP-TYPE |
|
|
|
hPECCMemory13 |
4363 |
Repeated ECC error corrected in memory module |
TRAP-TYPE |
|
|
|
hPECCMemory14 |
4364 |
ECC memory module is operating outside of acceptable margins |
TRAP-TYPE |
|
|
|
hPECCMemory15 |
4365 |
Memory Mirroring switched to Slave Set |
TRAP-TYPE |
|
|
|
hPECCMemory16 |
4366 |
Faulty row switched to Hot Spare row |
TRAP-TYPE |
|
|
|
hPRaid1 |
8609 |
HPDA Controller: Cache Error |
TRAP-TYPE |
|
|
|
hPRaid2 |
28609 |
HPDA Controller: Cache Error |
TRAP-TYPE |
|
|
|
hPRaid3 |
8625 |
HPDA Logical Drive: Critical |
TRAP-TYPE |
|
|
|
hPRaid4 |
8626 |
HPDA Logical Drive Not Available |
TRAP-TYPE |
|
|
|
hPRaid5 |
8641 |
HPDA Hot Spare:Failed |
TRAP-TYPE |
|
|
|
hPRaid6 |
28641 |
HPDA Hot Spare:Failed |
TRAP-TYPE |
|
|
|
hPRaid7 |
8642 |
HPDA Hot Spare Succeeded |
TRAP-TYPE |
|
|
|
hPRaid8 |
8657 |
HPDA Hard Disk Failed |
TRAP-TYPE |
|
|
|
hPRaid9 |
28657 |
HPDA Hard Disk Failed |
TRAP-TYPE |
|
|
|
hPRaid10 |
8673 |
HPDA Threshold Exceeded: Parity |
TRAP-TYPE |
|
|
|
hPRaid11 |
28673 |
HPDA Threshold Exceeded: Parity |
TRAP-TYPE |
|
|
|
hPRaid12 |
8674 |
HPDA Threshold Exceeded: Soft Errors |
TRAP-TYPE |
|
|
|
hPRaid13 |
28674 |
HPDA Threshold Exceeded: Soft Errors |
TRAP-TYPE |
|
|
|
hPRaid14 |
8675 |
HPDA Threshold Exceeded: Hardware Errors |
TRAP-TYPE |
|
|
|
hPRaid15 |
28675 |
HPDA Threshold Exceeded: Hardware Errors |
TRAP-TYPE |
|
|
|
hPRaid16 |
8676 |
HPDA Threshold Exceeded: Miscellaneous Errors |
TRAP-TYPE |
|
|
|
hPRaid17 |
28676 |
HPDA Threshold Exceeded: Miscellaneous Errors |
TRAP-TYPE |
|
|
|
hPRaid18 |
8677 |
HPDA Controller: NVRAM Age |
TRAP-TYPE |
|
|
|
hPRaid19 |
28677 |
HPDA Controller: NVRAM Age |
TRAP-TYPE |
|
|
|
hPChassis1 |
25019 |
The chassis has been opened. |
TRAP-TYPE |
|
|
|
hPEnvironment1 |
25000 |
One of the voltage sensors crossed its lower non-critical threshold. |
TRAP-TYPE |
|
|
|
hPEnvironment2 |
25001 |
One of the voltage sensors crossed its lower critical threshold. |
TRAP-TYPE |
|
|
|
hPEnvironment3 |
25002 |
One of the voltage sensors crossed its lower non-recoverable threshold. |
TRAP-TYPE |
|
|
|
hPEnvironment4 |
25003 |
One of the voltage sensors crossed its upper non-critical threshold. |
TRAP-TYPE |
|
|
|
hPEnvironment5 |
25004 |
One of the voltage sensors crossed its upper critical threshold. |
TRAP-TYPE |
|
|
|
hPEnvironment6 |
25005 |
One of the voltage sensors crossed its upper non-recoverable threshold. |
TRAP-TYPE |
|
|
|
hPEnvironment7 |
22801 |
Voltage Regulating Module (VRM) on the indicated processor module had failed. |
TRAP-TYPE |
|
|
|
hPFan1 |
25013 |
One of the fan sensors crossed its lower non-critical threshold. |
TRAP-TYPE |
|
|
|
hPFan2 |
25014 |
One of the fan sensors crossed its lower critical threshold. |
TRAP-TYPE |
|
|
|
hPFan3 |
25015 |
One of the fan sensors crossed its lower non-recoverable threshold. |
TRAP-TYPE |
|
|
|
hPFan4 |
25016 |
One of the fan sensors crossed its upper non-critical threshold. |
TRAP-TYPE |
|
|
|
hPFan5 |
25017 |
One of the fan sensors crossed its upper critical threshold. |
TRAP-TYPE |
|
|
|
hPFan6 |
25018 |
One of the fan sensors crossed its upper non-recoverable threshold. |
TRAP-TYPE |
|
|
|
hPFan7 |
22576 |
One of the fans in the Processor/PCI fan tray stopped. |
TRAP-TYPE |
|
|
|
hPFan8 |
22593 |
Two or more of the fans in the Processor/PCI Fan Tray have stopped or have been removed. |
TRAP-TYPE |
|
|
|
hPFan9 |
22608 |
Fan problem in Processor/PCI Fan Tray has been corrected. |
TRAP-TYPE |
|
|
|
hPFan10 |
22640 |
One of the fans in the Memory Fan Tray stopped. |
TRAP-TYPE |
|
|
|
hPFan11 |
22657 |
Two or more of the fans in the Memory Fan Tray have stopped or been removed. |
TRAP-TYPE |
|
|
|
hPFan12 |
22672 |
Fan problem in the Memory Fan Tray has been corrected. |
TRAP-TYPE |
|
|
|
hPFan13 |
25025 |
A system fan module error has occurred |
TRAP-TYPE |
|
|
|
hPFan14 |
25026 |
A system fan module error has occurred |
TRAP-TYPE |
|
|
|
hPFan15 |
25027 |
Fan module failure |
TRAP-TYPE |
|
|
|
hPFan16 |
25028 |
Fan module failure |
TRAP-TYPE |
|
|
|
hPFWUpdate1 |
101 |
Front Panel Controller firmware updated |
TRAP-TYPE |
|
|
|
hPFWUpdate2 |
102 |
Primary Hot Swap Cage Controller firmware updated |
TRAP-TYPE |
|
|
|
hPFWUpdate3 |
103 |
Secondary Hot Swap Cage Controller firmware updated |
TRAP-TYPE |
|
|
|
hPFWUpdate4 |
104 |
NetServer Management Controller firmware updated |
TRAP-TYPE |
|
|
|
hPFWUpdate5 |
105 |
CPU Management Controller firmware updated |
TRAP-TYPE |
|
|
|
hPTemperature1 |
25007 |
One of the temperature sensors crossed its lower non-critical threshold. |
TRAP-TYPE |
|
|
|
hPTemperature2 |
25008 |
One of the temperature sensors crossed its lower critical threshold. |
TRAP-TYPE |
|
|
|
hPTemperature3 |
25009 |
One of the temperature sensors crossed its lower non-recoverable threshold. |
TRAP-TYPE |
|
|
|
hPTemperature4 |
25010 |
One of the temperature sensors crossed its upper non-critical threshold. |
TRAP-TYPE |
|
|
|
hPTemperature5 |
25011 |
One of the temperature sensors crossed its upper critical threshold. |
TRAP-TYPE |
|
|
|
hPTemperature6 |
25012 |
One of the temperature sensors crossed its upper non-recoverable threshold. |
TRAP-TYPE |
|
|
|
networkCard1 |
16385 |
The total number of packets with receive errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard2 |
116385 |
The total number of packets with receive errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard3 |
216385 |
The total number of packets with receive errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard4 |
316385 |
The total number of packets with receive errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard5 |
16386 |
The total number of packets with transmit errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard6 |
116386 |
The total number of packets with transmit errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard7 |
216386 |
The total number of packets with transmit errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard8 |
316386 |
The total number of packets with transmit errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard9 |
16387 |
The total number of LAN Adapter reset errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard10 |
116387 |
The total number of LAN Adapter reset errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard11 |
216387 |
The total number of LAN Adapter reset errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard12 |
316387 |
The total number of LAN Adapter reset errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard13 |
16388 |
The total number of alignment and CRC errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard14 |
116388 |
The total number of alignment and CRC errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard15 |
216388 |
The total number of alignment and CRC errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard16 |
316388 |
The total number of alignment and CRC errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard17 |
16389 |
The total number of giant frame packets has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard18 |
116389 |
The total number of giant frame packets has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard19 |
216389 |
The total number of giant frame packets has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard20 |
316389 |
The total number of giant frame packets has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard21 |
16390 |
The total number of packets with length less than the required minimum length has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard22 |
116390 |
The total number of packets with length less than the required minimum length has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard23 |
216390 |
The total number of packets with length less than the required minimum length has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard24 |
316390 |
The total number of packets with length less than the required minimum length has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard25 |
16391 |
The total number of late collision errors has exceeded the threshold (the network is too large). |
TRAP-TYPE |
|
|
|
networkCard26 |
116391 |
The total number of late collision errors has exceeded the threshold (the network is too large). |
TRAP-TYPE |
|
|
|
networkCard27 |
216391 |
The total number of late collision errors has exceeded the threshold (the network is too large). |
TRAP-TYPE |
|
|
|
networkCard28 |
316391 |
The total number of late collision errors has exceeded the threshold (the network is too large). |
TRAP-TYPE |
|
|
|
networkCard29 |
16392 |
The total number of colliding packets has exceeded the threshold (the network is too busy). |
TRAP-TYPE |
|
|
|
networkCard30 |
116392 |
The total number of colliding packets has exceeded the threshold (the network is too busy). |
TRAP-TYPE |
|
|
|
networkCard31 |
216392 |
The total number of colliding packets has exceeded the threshold (the network is too busy). |
TRAP-TYPE |
|
|
|
networkCard32 |
316392 |
The total number of colliding packets has exceeded the threshold (the network is too busy). |
TRAP-TYPE |
|
|
|
networkCard33 |
16393 |
The total number of carrier sense errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard34 |
116393 |
The total number of carrier sense errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard35 |
216393 |
The total number of carrier sense errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard36 |
316393 |
The total number of carrier sense errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard37 |
16394 |
The total number of adapter deferrals has exceeded the threshold (the network is forever busy). |
TRAP-TYPE |
|
|
|
networkCard38 |
116394 |
The total number of adapter deferrals has exceeded the threshold (the network is forever busy). |
TRAP-TYPE |
|
|
|
networkCard39 |
216394 |
The total number of adapter deferrals has exceeded the threshold (the network is forever busy). |
TRAP-TYPE |
|
|
|
networkCard40 |
316394 |
The total number of adapter deferrals has exceeded the threshold (the network is forever busy). |
TRAP-TYPE |
|
|
|
networkCard41 |
16395 |
The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard42 |
116395 |
The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard43 |
216395 |
The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard44 |
316395 |
The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard45 |
16396 |
The total number of Receive Overflow errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard46 |
116396 |
The total number of Receive Overflow errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard47 |
216396 |
The total number of Receive Overflow errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard48 |
316396 |
The total number of Receive Overflow errors has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard49 |
16397 |
LAN adapter utilization count has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard50 |
116397 |
LAN adapter utilization count has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard51 |
216397 |
LAN adapter utilization count has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard52 |
316397 |
LAN adapter utilization count has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard53 |
16398 |
The LAN adapter which the alarms were configured for, has been replaced by another type of LAN adapter. |
TRAP-TYPE |
|
|
|
networkCard54 |
116398 |
The LAN adapter which the alarms were configured for, has been replaced by another type of LAN adapter. |
TRAP-TYPE |
|
|
|
networkCard55 |
16399 |
There possibly is a dataflow problem with your HP LAN adapter. |
TRAP-TYPE |
|
|
|
networkCard56 |
16400 |
The HP LAN adapter driver did not receive a transmit complete interrupt. |
TRAP-TYPE |
|
|
|
networkCard57 |
16401 |
There possibly is a dataflow problem with your HP LAN adapter. |
TRAP-TYPE |
|
|
|
networkCard58 |
16402 |
There is a dataflow problem with your HP LAN adapter - receive interrupts are being generated, but no receive packets are being present. |
TRAP-TYPE |
|
|
|
networkCard59 |
16403 |
There possibly is a problem with your HP LAN adapter - it generates too many buffer pointer errors. |
TRAP-TYPE |
|
|
|
networkCard60 |
16404 |
There possibly is a problem with your HP LAN adapter - DMA timed out while transmitting or receiving a packet. |
TRAP-TYPE |
|
|
|
networkCard61 |
16405 |
The HP LAN adapter is transmitting faster than the media can handle. |
TRAP-TYPE |
|
|
|
networkCard62 |
16406 |
The number of buffer fragments has exceeded the maximum number allowed by the network protocol in your HP LAN adapter. |
TRAP-TYPE |
|
|
|
networkCard63 |
16407 |
The total number of errors due to requests of an ECB being denied has exceeded the threshold. |
TRAP-TYPE |
|
|
|
networkCard64 |
16408 |
There possibly is a problem with your HP LAN adapter running in bus master mode. |
TRAP-TYPE |
|
|
|
networkCard65 |
16418 |
The active NIC in a redundant group has failed. The standby NIC has taken over. |
TRAP-TYPE |
|
|
|
networkCard66 |
116418 |
The active NIC in a redundant group has failed. The standby NIC has taken over. |
TRAP-TYPE |
|
|
|
networkCard67 |
16419 |
A previously failed NIC in a redundant group has become operational. |
TRAP-TYPE |
|
|
|
networkCard68 |
116419 |
A previously failed NIC in a redundant group has become operational. |
TRAP-TYPE |
|
|
|
networkCard69 |
16420 |
The standby NIC in a redundant group has failed. |
TRAP-TYPE |
|
|
|
networkCard70 |
116420 |
The standby NIC in a redundant group has failed. |
TRAP-TYPE |
|
|
|
networkCard71 |
16421 |
All NICs (active and standby) in a redundant group have failed. |
TRAP-TYPE |
|
|
|
networkCard72 |
116421 |
All NICs (active and standby) in a redundant group have failed. |
TRAP-TYPE |
|
|
|
rAASR1 |
501 |
ASR has stopped notifying the HP Remote Assistant Card that the system is running correctly (the server probably hung or crashed). |
TRAP-TYPE |
|
|
|
rAASR2 |
502 |
The HP Remote Assistant card has restarted the server due to the NOS being hung. |
TRAP-TYPE |
|
|
|
rAASR3 |
503 |
The Automatic Server Restart software has been enabled by the Remote Assistant ASR timer. |
TRAP-TYPE |
|
|
|
rAASR4 |
504 |
The HP Remote Assistant Automatic Server Restart timer has been disabled. |
TRAP-TYPE |
|
|
|
rABusUsage1 |
800 |
The 5-minute average EISA bus utilization has exceeded the configured threshold. |
TRAP-TYPE |
|
|
|
rAOther1 |
401 |
An administrator has logged in to the HP Remote Assistant Card. |
TRAP-TYPE |
|
|
|
rAOther2 |
2401 |
A remote user has logged in to the HP RA or Remote Control card. |
TRAP-TYPE |
|
|
|
rAOther3 |
402 |
An unauthorized user has made 3 or more unsuccessful attempts to log in to the HP Remote Assistant Card within a 5-minute period of time. |
TRAP-TYPE |
|
|
|
rAOther4 |
2402 |
An unauthorized user has made 3 or more unsuccessful attempts to log in to the HP RA or Remote Control card. |
TRAP-TYPE |
|
|
|
rAOther5 |
403 |
The HP Remote Assistant Card's battery charging circuit is bad. |
TRAP-TYPE |
|
|
|
rAOther6 |
404 |
The HP Remote Assistant Card has been shut down. |
TRAP-TYPE |
|
|
|
rAOther7 |
601 |
An administrator has executed a remote on the server via the HP Remote Assistant Card. |
TRAP-TYPE |
|
|
|
rAOther8 |
2601 |
An administrator has executed a remote on the server via the HP RA or Remote Control card. |
TRAP-TYPE |
|
|
|
rAOther9 |
602 |
An administrator has executed a remote power cycle on the server via the HP Remote Assistant Card. |
TRAP-TYPE |
|
|
|
rAOther10 |
1602 |
A remote user has executed a remote power cycle on the server via the HP RA or Remote Control. |
TRAP-TYPE |
|
|
|
rAOther11 |
3602 |
A remote user has executed a remote hard reset on the server via the HP RA or Remote Control. |
TRAP-TYPE |
|
|
|
rAOther12 |
603 |
An administrator has executed a remote power down of the server via the HP Remote Assistant Card. |
TRAP-TYPE |
|
|
|
rAOther13 |
1603 |
A remote user has executed a remote power down of the server via the HP RA or Remote Control card. |
TRAP-TYPE |
|
|
|
rAOther14 |
3603 |
A remote user has executed a remote power up of the server via the HP RA or Remote Control card. |
TRAP-TYPE |
|
|
|
rAOther15 |
4603 |
Automatic power shutdown due to critical condition. |
TRAP-TYPE |
|
|
|
rAOther16 |
5603 |
Front panel power down. |
TRAP-TYPE |
|
|
|
rAOther17 |
2604 |
A remote user has executed a remote graceful shutdown of the server via the HP RA or Remote Control card. |
TRAP-TYPE |
|
|
|
rAOther18 |
701 |
The server's BIOS has successfully initialized the HP Remote Assistant Card during the boot process. |
TRAP-TYPE |
|
|
|
rAOther19 |
900 |
An administrator has executed Test Page from the HP Remote Assistant Configuration Utility. |
TRAP-TYPE |
|
|
|
rAOther20 |
405 |
A remote user disconnected from the HP RA or Remote Control card. |
TRAP-TYPE |
|
|
|
rAOther21 |
406 |
An administrator has been automatically disconnected from the HP Remote Assistant board. The administrator was inactive for more than five minutes. |
TRAP-TYPE |
|
|
|
rAOther22 |
2406 |
A remote user has been automatically disconnected from the HP RA or Remote Control card, because of inactivity. |
TRAP-TYPE |
|
|
|
rAOther23 |
407 |
An administrator has been prematurely disconnected from the Remote Assistant board. |
TRAP-TYPE |
|
|
|
rAOther24 |
2407 |
A remote user has been prematurely disconnected from the HP RA or Remote Control card. |
TRAP-TYPE |
|
|
|
rAOther25 |
408 |
An administrator failed to connect to the HP Remote Assistant board on a dialback |
TRAP-TYPE |
|
|
|
rAOther26 |
2408 |
A remote user failed to connect to the HP RA or Remote Control on a dialback |
TRAP-TYPE |
|
|
|
rAOther27 |
3408 |
Integrated RA configuration reset to defaults |
TRAP-TYPE |
|
|
|
rAOther28 |
4408 |
TopTools Remote Control card configuration was corrupted and has been restored to default settings. |
TRAP-TYPE |
|
|
|
rAOther29 |
901 |
The HP Remote Assistant modem was unable to connect to the TAP paging service modem. |
TRAP-TYPE |
|
|
|
rAOther30 |
2901 |
The HP RA or Remote Control modem was unable to connect to the TAP paging service modem. |
TRAP-TYPE |
|
|
|
rAOther31 |
902 |
HP Remote Assistant was unable to connect with the TAP paging service. |
TRAP-TYPE |
|
|
|
rAOther32 |
903 |
HP Remote Assistant was unable to log on to the TAP paging service. |
TRAP-TYPE |
|
|
|
rAOther33 |
2902 |
The HP RA or Remote Control was unable to connect to the TAP paging service. |
TRAP-TYPE |
|
|
|
rAOther34 |
2903 |
The HP RA or Remote Control was unable to log on to the TAP paging service. |
TRAP-TYPE |
|
|
|
rAOther35 |
904 |
The HP Remote Assistant pager message was rejected |
TRAP-TYPE |
|
|
|
rAOther36 |
2904 |
The HP RA or Remote Control pager message was rejected by the TAP paging service. |
TRAP-TYPE |
|
|
|
rAOther37 |
2905 |
The HP RA or Remote Control email notification message was not sent correctly. |
TRAP-TYPE |
|
|
|
rAOther38 |
2906 |
A modem error has been detected on the remote management card. |
TRAP-TYPE |
|
|
|
rAOther39 |
2907 |
TopTools Remote Control Card memory test started |
TRAP-TYPE |
|
|
|
rAOther40 |
2908 |
TopTools Remote Control Card memory test completed |
TRAP-TYPE |
|
|
|
rAOther41 |
2909 |
TopTools Remote Control Card memory test stopped by user |
TRAP-TYPE |
|
|
|
rAOther42 |
2910 |
TopTools Remote Control Card memory test error |
TRAP-TYPE |
|
|
|
rAOther43 |
2911 |
TopTools Remote Control Card started |
TRAP-TYPE |
|
|
|
rAOther44 |
2912 |
TopTools Remote Control Card detects a serious internal error that prevents normal operation of the card |
TRAP-TYPE |
|
|
|
rAOther45 |
2913 |
The firmware on the TopTools Remote Control has been updated |
TRAP-TYPE |
|
|
|
rAOther46 |
2914 |
The TopTools Remote Control backup battery has discharged to a level where it will not be able to power the card |
TRAP-TYPE |
|
|
|
rAOther47 |
2915 |
The battery on the TopTools Remote Control card is disconnected |
TRAP-TYPE |
|
|
|
rAOther48 |
2916 |
Remote Control Card: DHCP has assigned a new IP address |
TRAP-TYPE |
|
|
|
rATemp1 |
211 |
The server temperature measured on the HP Remote Assistant Card has exceeded the configured warning threshold. |
TRAP-TYPE |
|
|
|
rATemp2 |
221 |
The server temperature measured on the HP Remote Assistant Card has exceeded the configured threshold and the server has been automatically shut down. |
TRAP-TYPE |
|
|
|
rATemp3 |
2221 |
The server temperature or voltage levels measured by the remote management hardware has exceeded the configured threshold. The server has been automatically shut down. |
TRAP-TYPE |
|
|
|
rATemp4 |
231 |
The server temperature measured on the HP Remote Assistant Card has exceeded the configured Graceful Shutdown threshold value by 5 degrees C and the server has been automatically shut down. |
TRAP-TYPE |
|
|
|
rAVoltage1 |
109 |
The server has lost the power completely. |
TRAP-TYPE |
|
|
|
rAVoltage2 |
111 |
Voltage measured in the server has gone outside of -12V Upper Threshold. |
TRAP-TYPE |
|
|
|
rAVoltage3 |
113 |
Voltage measured in the server has gone outside of +3.3V Upper Threshold. |
TRAP-TYPE |
|
|
|
rAVoltage4 |
114 |
Voltage measured in the server has gone outside of +5V Upper Threshold. |
TRAP-TYPE |
|
|
|
rAVoltage5 |
115 |
Voltage measured in the server has gone outside of +12V Upper Threshold. |
TRAP-TYPE |
|
|
|
rAVoltage6 |
121 |
Voltage measured in the server has gone outside of -12V Lower Threshold. |
TRAP-TYPE |
|
|
|
rAVoltage7 |
123 |
Voltage measured in the server has gone outside of +3.3V Lower Threshold. |
TRAP-TYPE |
|
|
|
rAVoltage8 |
124 |
Voltage measured in the server has gone outside of +5V Lower Threshold. |
TRAP-TYPE |
|
|
|
rAVoltage9 |
125 |
Voltage measured in the server has gone outside of +12V Lower Threshold. |
TRAP-TYPE |
|
|
|
rAVoltage10 |
122 |
The HP Remote Assistant Card's battery charging circuit is bad. |
TRAP-TYPE |
|
|
|
redundantPower1 |
9101 |
The Redundant Power Supply module is not operating properly, but there is no power supply module hardware failure. |
TRAP-TYPE |
|
|
|
redundantPower2 |
9103 |
Indicates a failure with the AC power source that is connected to one of the redundant power supply units. |
TRAP-TYPE |
|
|
|
redundantPower3 |
209103 |
Indicates a failure with the AC power source that is connected to one of the redundant power supply units. |
TRAP-TYPE |
|
|
|
redundantPower4 |
9105 |
Indicates that one of the redundant power supply modules is not in normal operating condition. |
TRAP-TYPE |
|
|
|
redundantPower5 |
9106 |
Indicates that one of the redundant power supply modules is in over temperature protection mode. |
TRAP-TYPE |
|
|
|
redundantPower6 |
209106 |
Indicates that one of the redundant power supply modules is in over temperature protection mode. |
TRAP-TYPE |
|
|
|
redundantPower7 |
9107 |
Indicates that one of the redundant power supply modules has been physically removed from the HP NetServer Power Supply Subsystem. |
TRAP-TYPE |
|
|
|
redundantPower8 |
9108 |
Indicates that one of the redundant power supply modules has been physically inserted into the HP NetServer Power Supply Subsystem. |
TRAP-TYPE |
|
|
|
redundantPower9 |
9109 |
Indicates that one of the redundant power supply modules in the HP NetServer has recovered from an over temperature protection mode. |
TRAP-TYPE |
|
|
|
redundantPower10 |
209109 |
Indicates that one of the redundant power supply modules in the HP NetServer has recovered from an over temperature protection mode. |
TRAP-TYPE |
|
|
|
redundantPower11 |
9110 |
Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the warning temperature level. |
TRAP-TYPE |
|
|
|
redundantPower12 |
209110 |
Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the warning temperature level. |
TRAP-TYPE |
|
|
|
redundantPower13 |
9111 |
Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the emergency temperature level. |
TRAP-TYPE |
|
|
|
redundantPower15 |
9113 |
The Power Supply Subsystem has fewer than the required number of Power Supply Units installed for normal operation or is having problems powering up or down. |
TRAP-TYPE |
|
|
|
redundantPower27 |
22720 |
Indicated Power Supply has been removed or is not connected properly. |
TRAP-TYPE |
|
|
|
redundantPower31 |
29103 |
The indicated Power Supply Unit power has failed. |
TRAP-TYPE |
|
|
|
redundantPower35 |
29106 |
The server Power Supply Subsystem has fewer than the required number of Power Supply Units installed for normal operation. |
TRAP-TYPE |
|
|
|
redundantPower36 |
29107 |
The server Power Supply Subsystem has fewer than the required number of Power Supply Units installed for normal operation. |
TRAP-TYPE |
|
|
|
storageCap1 |
4096 |
Volume Storage Capacity has exceeded the warning threshold level. |
TRAP-TYPE |
|
|
|
storageCap2 |
24096 |
Volume Storage Capacity has exceeded the warning threshold level. |
TRAP-TYPE |
|
|
|
storageCap3 |
4097 |
Volume Storage Capacity has exceeded the minor threshold level. |
TRAP-TYPE |
|
|
|
storageCap4 |
24097 |
Volume Storage Capacity has exceeded the minor threshold level. |
TRAP-TYPE |
|
|
|
storageCap5 |
4098 |
Volume Storage Capacity has exceeded the major threshold level. |
TRAP-TYPE |
|
|
|
storageCap6 |
24098 |
Volume Storage Capacity has exceeded the major threshold level. |
TRAP-TYPE |
|
|
|
systemHW1 |
4356 |
Post Error has occurred. |
TRAP-TYPE |
|
|
|
systemHW2 |
24356 |
Post Error has occurred. |
TRAP-TYPE |
|
|
|
systemHW3 |
24358 |
Post Error has occurred. |
TRAP-TYPE |
|
|
|
systemHW4 |
34356 |
System boot (POST Complete). |
TRAP-TYPE |
|
|
|
systemHW5 |
34357 |
Netserver Management Controller started |
TRAP-TYPE |
|
|
|
systemHW6 |
20528 |
Parity error has been detected in parity memory |
TRAP-TYPE |
|
|
|
systemHW7 |
20545 |
IPMB Protocol Error |
TRAP-TYPE |
|
|
|
systemHW8 |
20544 |
One of the bus masters caused a bus timeout |
TRAP-TYPE |
|
|
|
systemHW9 |
20560 |
I/0 channel check activated by device in EISA slot caused an error |
TRAP-TYPE |
|
|
|
systemHW10 |
20740 |
Voltage utilization warning |
TRAP-TYPE |
|
|
|
systemHW10s |
220560 |
I/0 channel check activated by device in EISA slot caused an error |
TRAP-TYPE |
|
|
|
systemHW11 |
20576 |
Software NMI has been generated |
TRAP-TYPE |
|
|
|
systemHW12 |
20577 |
Uncorrectable Bus Error |
TRAP-TYPE |
|
|
|
systemHW13 |
20592 |
Memory size has been adjusted during the Power-On-Self-Test during the last boot |
TRAP-TYPE |
|
|
|
systemHW14 |
20624 |
Parity error has occurred on a transfer to/from a device on one of the PCI buses |
TRAP-TYPE |
|
|
|
systemHW15 |
220624 |
Parity error has occurred on a transfer to or from a device on one of the PCI buses |
TRAP-TYPE |
|
|
|
systemHW16 |
20640 |
System error has occurred in the PCI subsystem |
TRAP-TYPE |
|
|
|
systemHW17 |
220640 |
System error has occurred in the PCI subsystem |
TRAP-TYPE |
|
|
|
systemHW18 |
20657 |
An uncorrectable Processor problem was detected. |
TRAP-TYPE |
|
|
|
systemHW20 |
20660 |
Processor or Terminator Card Not Detected |
TRAP-TYPE |
|
|
|
systemHW21 |
20656 |
Processor or Terminator (#) not detected |
TRAP-TYPE |
|
|
|
systemHW22 |
20661 |
Processor Internal Error |
TRAP-TYPE |
|
|
|
systemHW23 |
20662 |
Processor Thermal Trip Failure |
TRAP-TYPE |
|
|
|
systemHW24 |
20663 |
Processor failed internal self test |
TRAP-TYPE |
|
|
|
systemHW25 |
20664 |
Processor hung during POST |
TRAP-TYPE |
|
|
|
systemHW26 |
20665 |
Processor startup/initialization failed |
TRAP-TYPE |
|
|
|
systemHW28 |
20672 |
Timeout of failsafe timer has occurred |
TRAP-TYPE |
|
|
|
systemHW29 |
20704 |
Error logging for a specific error has been disabled due to too many errors of that kind in a short time period |
TRAP-TYPE |
|
|
|
systemHW30 |
20800 |
EISA Configuration Utility has altered system configuration |
TRAP-TYPE |
|
|
|
systemHW31 |
220800 |
Configuration Utility has altered system configuration |
TRAP-TYPE |
|
|
|
systemHW32 |
24453 |
Power connection failure in one of the devices in the hot swap cage |
TRAP-TYPE |
|
|
|
systemHW34 |
24454 |
A device has been removed from the hot swap cage |
TRAP-TYPE |
|
|
|
systemHW35 |
24455 |
A device has been inserted into the hot swap cage |
TRAP-TYPE |
|
|
|
systemHW36 |
54454 |
A SCSI cable has been removed from the hot swap cage. |
TRAP-TYPE |
|
|
|
systemHW37 |
54455 |
A SCSI cable was attached to hot swap cage. |
TRAP-TYPE |
|
|
|
systemHW38 |
54456 |
A SCSI terminator has been removed from the hot swap cage. |
TRAP-TYPE |
|
|
|
systemHW39 |
54457 |
A SCSI terminator has been attached in the hot swap cage. |
TRAP-TYPE |
|
|
|
systemHW40 |
224453 |
Power connection failure in one of the devices in the hot swap cage |
TRAP-TYPE |
|
|
|
systemHW41 |
224454 |
A device has been removed from the hot swap cage |
TRAP-TYPE |
|
|
|
systemHW42 |
224455 |
A device has been inserted into the hot swap cage |
TRAP-TYPE |
|
|
|
systemHW43 |
20736 |
An event of warning severity has occurred in the system. For example, chassis door has been opened |
TRAP-TYPE |
|
|
|
systemHW44 |
20737 |
An event of critical severity has occurred in the system. For example, both system fans have failed |
TRAP-TYPE |
|
|
|
systemHW45 |
24456 |
Event log is getting full. |
TRAP-TYPE |
|
|
|
systemHW48 |
20832 |
The hardware eventlog has been cleared. |
TRAP-TYPE |
|
|
|
systemHW49 |
20833 |
An unrecognized HW log event was detected. |
TRAP-TYPE |
|
|
|
systemHW50 |
20848 |
The system has been rebooted. |
TRAP-TYPE |
|
|
|
systemHW51 |
22528 |
The Processor in the indicated slot has been disabled by the BIOS. |
TRAP-TYPE |
|
|
|
systemHW52 |
22651 |
A user has halted the system with the NMI switch on the front panel. |
TRAP-TYPE |
|
|
|
systemHW53 |
22688 |
Previously disabled Processor has been reinstalled. |
TRAP-TYPE |
|
|
|
systemHW54 |
22752 |
The system has been reset because Control Board detected a critical error. |
TRAP-TYPE |
|
|
|
systemHW55 |
22768 |
The system has been power-cycled because Control Board detected a critical error. |
TRAP-TYPE |
|
|
|
systemHW56 |
22785 |
The Processor Card is missing or not properly terminated in indicated processor module. |
TRAP-TYPE |
|
|
|
systemHW57 |
22544 |
A single or multiple ECC Error has been detected on the P6 bus. |
TRAP-TYPE |
|
|
|
systemHW58 |
20680 |
Front Panel Button Violation |
TRAP-TYPE |
|
|
|
systemHW59 |
20659 |
The CPU processor module is currently functioning properly, but it is no longer operating within acceptable margins |
TRAP-TYPE |
|
|
|
systemHW60 |
20666 |
PCI Hot Plug fault deasserted |
TRAP-TYPE |
|
|
|
systemHW61 |
20667 |
PCI Hot Plug Powered On |
TRAP-TYPE |
|
|
|
systemHW62 |
20668 |
PCI Hot Plug fault asserted |
TRAP-TYPE |
|
|
|
systemHW63 |
20669 |
PCI Hot Plug Powered off |
TRAP-TYPE |
|
|
|
systemHW64 |
20578 |
Cache Protocol and Parity error |
TRAP-TYPE |
|
|
|
systemHW67 |
254454 |
A SCSI cable has been removed from the hot swap cage. |
TRAP-TYPE |
|
|
|
systemHW68 |
254455 |
A SCSI cable was attached to the hot swap cage. |
TRAP-TYPE |
|
|
|
systemHW69 |
254456 |
A SCSI terminator has been removed from the hot swap cage. |
TRAP-TYPE |
|
|
|
systemHW70 |
254457 |
A SCSI terminator has been attached in the hot swap cage. |
TRAP-TYPE |
|
|
|
systemHW71 |
324454 |
A drive has been removed from the hot swap cage |
TRAP-TYPE |
|
|
|
systemHW72 |
324455 |
A drive has been inserted into the hot swap cage |
TRAP-TYPE |
|
|
|
systemHW73 |
20546 |
NOS memory dump initiated |
TRAP-TYPE |
|
|
|
systemHW74 |
54460 |
SCSI Duplex Board has been removed |
TRAP-TYPE |
|
|
|
systemHW75 |
54461 |
SCSI Duplex Board has been inserted |
TRAP-TYPE |
|
|
|
systemHW76 |
54465 |
Normal ACPI server shutdown |
TRAP-TYPE |
|
|
|
systemHW78 |
54464 |
SCSI Bus Type has changed |
TRAP-TYPE |
|
|
|
systemHW79 |
20671 |
Configuration error in a processor slot |
TRAP-TYPE |
|
|
|
systemHW80 |
25022 |
Battery cycles have gone beyond the upper non-critical range |
TRAP-TYPE |
|
|
|
systemHW81 |
25023 |
Battery cycles have gone beyond the upper critical range |
TRAP-TYPE |
|
|
|
systemHW82 |
25024 |
Battery cycles have gone beyond the upper non-recoverable range |
TRAP-TYPE |
|
|
|
systemHW83s |
44457 |
FRU internal use area cleared |
TRAP-TYPE |
|
|
|
systemHW84 |
25780 |
Unrecoverable chipset error has occurred in system board . |
TRAP-TYPE |
|
|
|
systemHW100 |
53001 |
SMART predictive failure detected |
TRAP-TYPE |
|
|
|
systemFW1 |
20758 |
Generic trap for Critical or Fatal type E0 event from system firmware |
TRAP-TYPE |
|
|
|
systemFW2 |
20756 |
System Firmware Boot Start |
TRAP-TYPE |
|
|
|
systemFW4 |
20757 |
Machine Check Initiated |
TRAP-TYPE |
|
|
|
temperature1 |
12288 |
Server temperature monitor cannot read temperature data. |
TRAP-TYPE |
|
|
|
temperature2 |
12289 |
Server temperature has exceeded the warning temperature threshold. |
TRAP-TYPE |
|
|
|
temperature3 |
12290 |
Server temperature has exceeded the emergency temperature threshold. |
TRAP-TYPE |
|
|
|
temperature4 |
24449 |
Hot Swap Cage : Temperature monitor error occurred |
TRAP-TYPE |
|
|
|
temperature5 |
24451 |
Hot Swap Cage : Warning temperature exceeded |
TRAP-TYPE |
|
|
|
temperature6 |
24452 |
Hot Swap Cage : Emergency temperature exceeded! |
TRAP-TYPE |
|
|
|
temperature7 |
224449 |
Hot Swap Cage : Temperature monitor error occurred |
TRAP-TYPE |
|
|
|
temperature8 |
224451 |
Hot Swap Cage : Warning temperature exceeded |
TRAP-TYPE |
|
|
|
temperature9 |
224452 |
Hot Swap Cage : Emergency temperature exceeded! |
TRAP-TYPE |
|
|
|
voltage1 |
20739 |
Warning voltage threshold on one of the system voltage channels has been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI, +3.3V to Processor |
TRAP-TYPE |
|
|
|
voltage2 |
20738 |
Fatal voltage threshold on one of the system voltage sensors has been exceeded. Voltage sensors are +12V, +5V, -12V, +3.3V to PCI, +3.3V to Processor |
TRAP-TYPE |
|
|
|