HUAWEI-BRAS-MVLAN-MIB

File: HUAWEI-BRAS-MVLAN-MIB.mib (5838 bytes)

Imported modules

HUAWEI-MIB Q-BRIDGE-MIB SNMPv2-SMI

Imported symbols

hwBRASMib VlanIndex VlanId
Integer32 OBJECT-TYPE

Defined Types

HWMulticastVlanEntry  
SEQUENCE    
  hwMulticastVlanIfIndex VlanIndex
  hwMulticastInnerVlan VlanId
  hwMulticastOuterVlan VlanId
  hwMulticastOpType INTEGER

Defined Values

hwMVLAN 1.3.6.1.4.1.2011.5.25.40.14
The HUAWEI-BRAS-MVLAN-MIB contains objects to manage BRAS.
MODULE-IDENTITY    

hwhwMVLANMibObjects 1.3.6.1.4.1.2011.5.25.40.14.1
OBJECT IDENTIFIER    

hwMulticastVlanTable 1.3.6.1.4.1.2011.5.25.40.14.1.1
A table of setting multicast program VlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HWMulticastVlanEntry

hwMulticastVlanEntry 1.3.6.1.4.1.2011.5.25.40.14.1.1.1
An entry of hwMulticastVlanEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  HWMulticastVlanEntry  

hwMulticastVlanIfIndex 1.3.6.1.4.1.2011.5.25.40.14.1.1.1.1
A value used to index per-VLAN tables: values of 0 and 4095 are not permitted. If the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095, then it represents a VLAN with scope local to the particular agent, i.e., one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q, but it is convenient to be able to manage them in the same way using this MIB.
Status: current Access: read-only
OBJECT-TYPE    
  VlanIndex  

hwMulticastInnerVlan 1.3.6.1.4.1.2011.5.25.40.14.1.1.1.2
The hwMulticastInnerVlan that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the REFERENCEd specification.
Status: current Access: read-write
OBJECT-TYPE    
  VlanId  

hwMulticastOuterVlan 1.3.6.1.4.1.2011.5.25.40.14.1.1.1.3
The hwMulticastOuterVlan that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the REFERENCEd specification.
Status: current Access: read-write
OBJECT-TYPE    
  VlanId  

hwMulticastOpType 1.3.6.1.4.1.2011.5.25.40.14.1.1.1.4
0 : set multicast-vlan. 1 : undo multicast-vlan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER set(0), undo(1)  

hwMVlanMIBConformance 1.3.6.1.4.1.2011.5.25.40.14.2
OBJECT IDENTIFIER    

hwMVlanMIBCompliances 1.3.6.1.4.1.2011.5.25.40.14.2.1
OBJECT IDENTIFIER    

hwMVlanMIBCompliance 1.3.6.1.4.1.2011.5.25.40.14.2.1.1
The compliance statement for systems supporting the HUAWEI-DATACOMM-OID-MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

hwMVlanMIBGroups 1.3.6.1.4.1.2011.5.25.40.14.2.2
OBJECT IDENTIFIER    

hwMVlanGroup 1.3.6.1.4.1.2011.5.25.40.14.2.2.1
The hwMVLAN group.
Status: current Access: read-write
OBJECT-GROUP