HUAWEI-QINQ-MIB

File: HUAWEI-QINQ-MIB.mib (119168 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI SNMPv2-CONF
HUAWEI-MIB Q-BRIDGE-MIB IF-MIB
P-BRIDGE-MIB HUAWEI-L2IF-MIB

Imported symbols

RowStatus MacAddress TEXTUAL-CONVENTION
MODULE-IDENTITY OBJECT-TYPE Integer32
OBJECT-IDENTITY IpAddress Counter64
Unsigned32 OBJECT-GROUP MODULE-COMPLIANCE
hwDatacomm VlanId InterfaceIndex
EnabledStatus VlanList

Defined Types

BpduIndex  
A list value for bpdu.
TEXTUAL-CONVENTION    
  INTEGER stp01(1), pauseFrame(2), reserved02(3), reserved03(4), reserved04(5), reserved05(6), reserved06(7), reserved07(8), stp02(9), reserved08(10), hgmp(11), reserved09(12), reserved10(13), reserved11(14), reserved12(15), reserved13(16), reserved14(17), reserved15(18), reserved16(19), reserved17(20), isisLevel01(21), isisLevel02(22), reserved18(23), reserved19(24), reserved20(25), reserved21(26), reserved22(27), reserved23(28), reserved24(29), reserved25(30), reserved26(31), reserved27(32), gmrp(33), gvrp(34), reserved28(35), reserved29(36), reserved30(37), reserved31(38), reserved32(39), reserved33(40), reserved34(41), reserved35(42), reserved36(43), reserved37(44), reserved38(45), reserved39(46), reserved40(47), reserved41(48), lacp(49), cdp(50), pagp(51), udld(52), vtp(53)  

HwQinQBpduTunnelEntry  
SEQUENCE    
  hwQinQBpduTunnelIndex Integer32
  hwQinQEtherEncpsType OCTET STRING
  hwQinQBpduTunnelEnableOneQBpduTunnel EnabledStatus
  hwQinQBpduTunnelEnableBpduTag EnabledStatus
  hwQinQBpduTunnelEnableTwoQBpduTunnel EnabledStatus
  hwQinQBpduTunnelCustomerBpduTag Integer32
  hwQinQBpduTunnelCustomerBpduTagListLow OCTET STRING
  hwQinQBpduTunnelCustomerBpduTagListHigh OCTET STRING
  hwQinQRemarkOuterTpid INTEGER
  hwQinQBpduTunnelEnableBpduFilter EnabledStatus

HwQinQSubIfVlanStackingEntry  
SEQUENCE    
  hwQinQSubIfStackingIfIndex InterfaceIndex
  hwQinQSubIfStackingCEVlanStart VlanId
  hwQinQSubIfStackingCEVlanEnd VlanId
  hwQinQSubIfStackGroupId Integer32
  hwQinQSubIfStackingRowStatus RowStatus
  hwQinQSubIfStackingPEVlan Integer32

HwQinQSubIfStackingStatEntry  
SEQUENCE    
  hwQinQSubIfStackingStatIfIndex InterfaceIndex
  hwQinQSubIfStackingStatCEVlan VlanId
  hwQinQSubIfStackStatGroupId Integer32
  hwQinQSubIfStackingStatOutPackets Counter64
  hwQinQSubIfStackingStatInPackets Counter64
  hwQinQSubIfStackingStatOutBytes Counter64
  hwQinQSubIfStackingStatInBytes Counter64
  hwQinQSubIfStackStatOutBdPackets Counter64
  hwQinQSubIfStackStatInBdPackets Counter64
  hwQinQSubIfStackStatOutMuPackets Counter64
  hwQinQSubIfStackStatInMuPackets Counter64
  hwQinQSubIfStackStatOutUniPackets Counter64
  hwQinQSubIfStackStatInUniPackets Counter64

HwQinQSubIfTermEntry  
SEQUENCE    
  hwQinQSubIfTermIfIndex InterfaceIndex
  hwQinQSubIfTermPEVlan VlanId
  hwQinQSubIfTermCEVlanStart VlanId
  hwQinQSubIfTermCEVlanEnd VlanId
  hwQinQSubIfTermGroupId Integer32
  hwQinQSubIfTermRowStatus RowStatus

HwQinQSubIfTermStatEntry  
SEQUENCE    
  hwQinQSubIfTermStatIfIndex InterfaceIndex
  hwQinQSubIfTermStatPEVlan VlanId
  hwQinQSubIfTermStatCEVlan VlanId
  hwQinQSubIfTermStatGroupId Integer32
  hwQinQSubIfTermStatOutPackets Counter64
  hwQinQSubIfTermStatOutBytes Counter64
  hwQinQSubIfTermStatInPackets Counter64
  hwQinQSubIfTermStatInBytes Counter64
  hwQinQSubIfTermStatOutBdPackets Counter64
  hwQinQSubIfTermStatInBdPackets Counter64
  hwQinQSubIfTermStatOutMuPackets Counter64
  hwQinQSubIfTermStatInMuPackets Counter64
  hwQinQSubIfTermStatOutUniPackets Counter64
  hwQinQSubIfTermStatInUniPackets Counter64

HwQinQStaticARPCfgEntry  
SEQUENCE    
  hwQinQStaticARPCfgIfIndex InterfaceIndex
  hwQinQStaticARPCfgIp IpAddress
  hwQinQStaticARPCfgMac MacAddress
  hwQinQStaticARPCfgVlan VlanId
  hwQinQStaticARPCfgCEVlan Integer32
  hwQinQStaticARPCfgRowStatus RowStatus

HwQinQStaticMACCfgEntry  
SEQUENCE    
  hwQinQStaticMACCfgMac MacAddress
  hwQinQStaticMACCfgVlan VlanId
  hwQinQStaticMACCfgVsiName OCTET STRING
  hwQinQStaticMACCfgPEVlan VlanId
  hwQinQStaticMACCfgCEVlan Integer32
  hwQinQStaticMACCfgType INTEGER
  hwQinQStaticMACCfgIfIndex InterfaceIndex
  hwQinQStaticMACCfgFlag INTEGER
  hwQinQStaticMACCfgRowStatus RowStatus

HwQinQSubIfDot1qTermEntry  
SEQUENCE    
  hwQinQSubIfDot1qTermIfIndex InterfaceIndex
  hwQinQSubIfDot1qTermVidStart VlanId
  hwQinQSubIfDot1qTermVidEnd VlanId
  hwQinQSubIfDot1qTermGroupId Integer32
  hwQinQSubIfDot1qTermRowStatus RowStatus

HwQinQSubIfDot1qTermStatEntry  
SEQUENCE    
  hwQinQSubIfDot1qTermStatIfIndex InterfaceIndex
  hwQinQSubIfDot1qTermStatCEVlan VlanId
  hwQinQSubIfDot1qTermStatGroupId Integer32
  hwQinQSubIfDot1qTermStatOutPackets Counter64
  hwQinQSubIfDot1qTermStatOutBytes Counter64
  hwQinQSubIfDot1qTermStatInPackets Counter64
  hwQinQSubIfDot1qTermStatInBytes Counter64
  hwQinQSubIfDot1qTermStatOutBdPackets Counter64
  hwQinQSubIfDot1qTermStatInBdPackets Counter64
  hwQinQSubIfDot1qTermStatOutMuPackets Counter64
  hwQinQSubIfDot1qTermStatInMuPackets Counter64
  hwQinQSubIfDot1qTermStatOutUniPackets Counter64
  hwQinQSubIfDot1qTermStatInUniPackets Counter64

HwQinQModeCfgEntry  
SEQUENCE    
  hwQinQModeCfgIfIndex InterfaceIndex
  hwQinQModeCfgMode INTEGER
  hwQinQEtherType Unsigned32
  hwQinQCeEtherType Unsigned32

HwQinQCtrlVlanCfgEntry  
SEQUENCE    
  hwQinQCtrlVlanCfgIfIndex InterfaceIndex
  hwQinQCtrlVlan VlanId
  hwQinQSubIfType INTEGER
  hwQinQCtrlVlanFlag INTEGER
  hwQinQCtrlVlanRowStatus RowStatus
  hwQinQFlexibleFlag EnabledStatus

HwQinQGroupCfgEntry  
SEQUENCE    
  hwQinQGroupCfgIfIndex InterfaceIndex
  hwQinQGroupId Integer32
  hwQinQGroupType INTEGER
  hwQinQGroupStat EnabledStatus
  hwQinQGroupRowStatus RowStatus

HwQinQAsymmetryCfgEntry  
SEQUENCE    
  hwQinQAsymmetryCfgIfIndex InterfaceIndex
  hwQinQSubIfAsymmetry INTEGER
  hwQinQAsymmetryUserMode EnabledStatus

HwQinQRemarkCfgEntry  
SEQUENCE    
  hwQinQRemarkCfgIfIndex InterfaceIndex
  hwQinQPriorityRemark INTEGER

HwBpduTunnelIngressEntry  
SEQUENCE    
  hwBpduTunnelIngressPortIndex Integer32
  hwBpduTunnelBpduIngressMacIndex BpduIndex
  hwBpduTunnelIngressAddress MacAddress
  hwBpduTunnelIngressRowStatus RowStatus

HwBpduTunnelEgressEntry  
SEQUENCE    
  hwBpduTunnelEgressPortIndex Integer32
  hwBpduTunnelBpduEgressMacIndex BpduIndex
  hwBpduTunnelEgressAddress MacAddress
  hwBpduTunnelEgressRowStatus RowStatus

HwBpduTunnelVlanEntry  
SEQUENCE    
  hwBpduTunnelPortIndex Integer32
  hwBpduTunnelEnable INTEGER
  hwBpduTunnelVlanListLow VlanList
  hwBpduTunnelVlanListHigh VlanList

HwBpduTunnelEntry  
SEQUENCE    
  hwBpduTunnelBpduIndex BpduIndex
  hwBpduTunnelBpduEnable INTEGER
  hwBpduTunnelMultiAddress MacAddress
  hwBpduTunnelRowStatus RowStatus

HwQinQSwapCfgEntry  
SEQUENCE    
  hwQinQSwapCfgIfIndex InterfaceIndex
  hwQinQSwapCfgFlag EnabledStatus

HwQinQSubIfMapEntry  
SEQUENCE    
  hwQinQSubIfMapIfIndex InterfaceIndex
  hwQinQSubIfPEVlan Integer32
  hwQinQSubIfCEVlanStart Integer32
  hwQinQSubIfCEVlanEnd Integer32
  hwQinQSubIfPEVlanMap Integer32
  hwQinQSubIfPEEtherType Unsigned32
  hwQinQSubIfCEVlanMap Integer32
  hwQinQSubIfCEEtherType Unsigned32
  hwQinQSubIfMapGroupId Integer32
  hwQinQSubIfMapPe8021p INTEGER
  hwQinQSubIfMapCe8021p INTEGER
  hwQinQSubIfMapCetoPeFlag EnabledStatus
  hwQinQSubIfMapRowStatus RowStatus

HwQinQStackingVlanCfgEntry  
SEQUENCE    
  hwQinQStackingVlanCfgIfIndex InterfaceIndex
  hwQinQStackingVlanCfgVlanId VlanId
  hwQinQStackingVlanCfgRowStatus RowStatus

Defined Values

hwQinQ 1.3.6.1.4.1.2011.5.25.116
The QinQ MIB module is defined to manage the configuration under system or interface view.
MODULE-IDENTITY    

hwQinQSystemBase 1.3.6.1.4.1.2011.5.25.116.1
OBJECT IDENTIFIER    

hwQinQSystemWellKnowMac 1.3.6.1.4.1.2011.5.25.116.1.1
The destination MAC address replacing the original destination macAddress is a well-known multicast address. This well-known multicast address shields BPDUs inner details to allow these BPDUs to be transmitted with a tag through the carrier's network.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwQinQSystemBridgeRole 1.3.6.1.4.1.2011.5.25.116.1.2
It indicates the Bridge 's location, having two possible values :Customers' Bridge and Providers' Bridge.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER provider(2), customer(1)  

hwBpduSystemDropPacketSta 1.3.6.1.4.1.2011.5.25.116.1.3
View statistics about the discarded BPDUs.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hwQinQSystemEtherType 1.3.6.1.4.1.2011.5.25.116.1.4
The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ. Default is '8100'h.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 600..ffff  

hwQinQMngObjects 1.3.6.1.4.1.2011.5.25.116.2
OBJECT IDENTIFIER    

hwQinQBpduTunnelTable 1.3.6.1.4.1.2011.5.25.116.2.1
QinQ-port configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQBpduTunnelEntry

hwQinQBpduTunnelEntry 1.3.6.1.4.1.2011.5.25.116.2.1.1
The entry of an interface enabled the QinQ function.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQBpduTunnelEntry  

hwQinQBpduTunnelIndex 1.3.6.1.4.1.2011.5.25.116.2.1.1.1
Index number of the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwQinQEtherEncpsType 1.3.6.1.4.1.2011.5.25.116.2.1.1.2
The value of tag type is encapsulated in the head of the Ethernet frame To distinguish the encapsulated mode between the 802.1Q and QinQ.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2)  

hwQinQBpduTunnelEnableOneQBpduTunnel 1.3.6.1.4.1.2011.5.25.116.2.1.1.3
The value indicates whether the 1Q-bpdutunnel is opened, If hwQinQBpduTunnelEnableTwoQBpduTunnel is enabling, then this value should be disable.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwQinQBpduTunnelEnableBpduTag 1.3.6.1.4.1.2011.5.25.116.2.1.1.4
Whether to enable the setting of BPDU Tunnel tag. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

hwQinQBpduTunnelEnableTwoQBpduTunnel 1.3.6.1.4.1.2011.5.25.116.2.1.1.5
The value indicates whether the 2Q-bpdutunnel is opened, If hwQinQBpduTunnelEnableOneQBpduTunnel is enabling, then this value should be disable. Default is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

hwQinQBpduTunnelCustomerBpduTag 1.3.6.1.4.1.2011.5.25.116.2.1.1.6
The tag is inserted into the head of the BPDU ,to support that can be transmitted through the services' network.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwQinQBpduTunnelCustomerBpduTagListLow 1.3.6.1.4.1.2011.5.25.116.2.1.1.7
The list describes accessible bode from different vlan (0 to 2047).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(256)  

hwQinQBpduTunnelCustomerBpduTagListHigh 1.3.6.1.4.1.2011.5.25.116.2.1.1.8
The list describes accessible bpdu from different vlan (2048 to 4094).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(256)  

hwQinQRemarkOuterTpid 1.3.6.1.4.1.2011.5.25.116.2.1.1.9
The value indicates the TPID of outer tag of packets that have two tag and output from the output interface of vlan-switch, If hwQinQEtherEncpsType is enabling, then this value should be 0xffff.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hexffff(1), hex88a8(2), hex9100(3), hex8100(4)  

hwQinQBpduTunnelEnableBpduFilter 1.3.6.1.4.1.2011.5.25.116.2.1.1.10
The value indicates whether the BPDU filter function is enabled. If hwQinQBpduTunnelEnableBpduFilter is enabled, then this value should be enable.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwQinQSubIfVlanStackingTable 1.3.6.1.4.1.2011.5.25.116.2.2
Used to configure packets'vlan stacking in sub interface, receive one-tag packets and transmit two-tag packets, where the outer-tag inserted is in hwQinQSubIfVlanStackingTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQSubIfVlanStackingEntry

hwQinQSubIfVlanStackingEntry 1.3.6.1.4.1.2011.5.25.116.2.2.1
The entry of an interface enabled the QinQ-stacking function.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQSubIfVlanStackingEntry  

hwQinQSubIfStackingIfIndex 1.3.6.1.4.1.2011.5.25.116.2.2.1.1
Index number of the QinQ-stacking interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQSubIfStackingCEVlanStart 1.3.6.1.4.1.2011.5.25.116.2.2.1.2
When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

hwQinQSubIfStackingCEVlanEnd 1.3.6.1.4.1.2011.5.25.116.2.2.1.3
When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

hwQinQSubIfStackGroupId 1.3.6.1.4.1.2011.5.25.116.2.2.1.4
Group-management id.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16  

hwQinQSubIfStackingRowStatus 1.3.6.1.4.1.2011.5.25.116.2.2.1.5
Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfVlanStackingTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfVlanStackingTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwQinQSubIfStackingPEVlan 1.3.6.1.4.1.2011.5.25.116.2.2.1.6
PE vlan id.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hwQinQSubIfStackingStatTable 1.3.6.1.4.1.2011.5.25.116.2.3
When a sub interface configured QinQ-stacking function, hwQinQSubIfStackingStatTable is used to statistic total number of the out packets and in packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQSubIfStackingStatEntry

hwQinQSubIfStackingStatEntry 1.3.6.1.4.1.2011.5.25.116.2.3.1
The entry of an interface enabled the QinQ-stacking function.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQSubIfStackingStatEntry  

hwQinQSubIfStackingStatIfIndex 1.3.6.1.4.1.2011.5.25.116.2.3.1.1
Index number of the QinQ-stacking interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQSubIfStackingStatCEVlan 1.3.6.1.4.1.2011.5.25.116.2.3.1.2
Inner vlan in packets which input the QinQ sub interface, used to indicate the packets as an index.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

hwQinQSubIfStackStatGroupId 1.3.6.1.4.1.2011.5.25.116.2.3.1.3
The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

hwQinQSubIfStackingStatOutPackets 1.3.6.1.4.1.2011.5.25.116.2.3.1.4
Total number of out packets of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfStackingStatOutBytes 1.3.6.1.4.1.2011.5.25.116.2.3.1.5
Total number of out bytes of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfStackingStatInPackets 1.3.6.1.4.1.2011.5.25.116.2.3.1.6
Total number of in packets of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfStackingStatInBytes 1.3.6.1.4.1.2011.5.25.116.2.3.1.7
Total number of in bytes of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfStackStatOutBdPackets 1.3.6.1.4.1.2011.5.25.116.2.3.1.8
Total number of broadcast packets transmitted out of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfStackStatInBdPackets 1.3.6.1.4.1.2011.5.25.116.2.3.1.9
Total number of broadcast packets received from the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfStackStatOutMuPackets 1.3.6.1.4.1.2011.5.25.116.2.3.1.10
Total number of multicast packets transmitted out of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfStackStatInMuPackets 1.3.6.1.4.1.2011.5.25.116.2.3.1.11
Total number of multicast packets received from the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfStackStatOutUniPackets 1.3.6.1.4.1.2011.5.25.116.2.3.1.12
Total number of unicast packets transmitted out of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfStackStatInUniPackets 1.3.6.1.4.1.2011.5.25.116.2.3.1.13
Total number of unicast packets received from the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfTermTable 1.3.6.1.4.1.2011.5.25.116.2.4
The table is used to configure QinQ-termination function in sub interface, then packets transmitted from this sub interface input with two tags will be terminated.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQSubIfTermEntry

hwQinQSubIfTermEntry 1.3.6.1.4.1.2011.5.25.116.2.4.1
The entry of an interface enabled the QinQ-termination function.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQSubIfTermEntry  

hwQinQSubIfTermIfIndex 1.3.6.1.4.1.2011.5.25.116.2.4.1.1
Index number of the QinQ-termination interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQSubIfTermPEVlan 1.3.6.1.4.1.2011.5.25.116.2.4.1.2
Outer vlan id of the packets which have two tags before being terminated.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

hwQinQSubIfTermCEVlanStart 1.3.6.1.4.1.2011.5.25.116.2.4.1.3
When configure ce vlan as a range, hwQinQSubIfTermCEVlanStart is the start vlan id and hwQinQSubIfTermCEVlanEnd is the end vlan id.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

hwQinQSubIfTermCEVlanEnd 1.3.6.1.4.1.2011.5.25.116.2.4.1.4
When configure ce vlan as a range, hwQinQSubIfTermCEVlanStart is the start vlan id and hwQinQSubIfTermCEVlanEnd is the end vlan id.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

hwQinQSubIfTermGroupId 1.3.6.1.4.1.2011.5.25.116.2.4.1.5
Group-management id.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16  

hwQinQSubIfTermRowStatus 1.3.6.1.4.1.2011.5.25.116.2.4.1.6
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfTermTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfTermTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwQinQSubIfTermStatTable 1.3.6.1.4.1.2011.5.25.116.2.5
When a sub interface configured QinQ-termination function, hwQinQSubIfTermStatTable used to statistic total number of the out packets and in packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQSubIfTermStatEntry

hwQinQSubIfTermStatEntry 1.3.6.1.4.1.2011.5.25.116.2.5.1
The entry of an interface enabled the QinQ-termination function.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQSubIfTermStatEntry  

hwQinQSubIfTermStatIfIndex 1.3.6.1.4.1.2011.5.25.116.2.5.1.1
Index number of the QinQ-termination interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQSubIfTermStatPEVlan 1.3.6.1.4.1.2011.5.25.116.2.5.1.2
Outer vlan in packets which input the QinQ sub interface, used to indicate the packets as an index.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

hwQinQSubIfTermStatCEVlan 1.3.6.1.4.1.2011.5.25.116.2.5.1.3
Inner vlan in packets which input the QinQ sub interface, used to indicate the packets as an index.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

hwQinQSubIfTermStatGroupId 1.3.6.1.4.1.2011.5.25.116.2.5.1.4
The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

hwQinQSubIfTermStatOutPackets 1.3.6.1.4.1.2011.5.25.116.2.5.1.5
Total number of out packets of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfTermStatOutBytes 1.3.6.1.4.1.2011.5.25.116.2.5.1.6
Total number of out bytes of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfTermStatInPackets 1.3.6.1.4.1.2011.5.25.116.2.5.1.7
Total number of in packets of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfTermStatInBytes 1.3.6.1.4.1.2011.5.25.116.2.5.1.8
Total number of in bytes of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfTermStatOutBdPackets 1.3.6.1.4.1.2011.5.25.116.2.5.1.9
Total number of broadcast packets transmitted out of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfTermStatInBdPackets 1.3.6.1.4.1.2011.5.25.116.2.5.1.10
Total number of broadcast packets received from the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfTermStatOutMuPackets 1.3.6.1.4.1.2011.5.25.116.2.5.1.11
Total number of multicast packets transmitted out of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfTermStatInMuPackets 1.3.6.1.4.1.2011.5.25.116.2.5.1.12
Total number of multicast packets received from the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfTermStatOutUniPackets 1.3.6.1.4.1.2011.5.25.116.2.5.1.13
Total number of unicast packets transmitted out of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfTermStatInUniPackets 1.3.6.1.4.1.2011.5.25.116.2.5.1.14
Total number of unicast packets received from the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQStaticARPCfgTable 1.3.6.1.4.1.2011.5.25.116.2.6
The table is used to configure QinQ static ARP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQStaticARPCfgEntry

hwQinQStaticARPCfgEntry 1.3.6.1.4.1.2011.5.25.116.2.6.1
The entry of an interface enabled the QinQ function.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQStaticARPCfgEntry  

hwQinQStaticARPCfgIfIndex 1.3.6.1.4.1.2011.5.25.116.2.6.1.1
The interface's Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQStaticARPCfgIp 1.3.6.1.4.1.2011.5.25.116.2.6.1.2
The IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwQinQStaticARPCfgMac 1.3.6.1.4.1.2011.5.25.116.2.6.1.3
The MAC address.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

hwQinQStaticARPCfgVlan 1.3.6.1.4.1.2011.5.25.116.2.6.1.4
The first vlan id.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

hwQinQStaticARPCfgCEVlan 1.3.6.1.4.1.2011.5.25.116.2.6.1.5
The second vlan id.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hwQinQStaticARPCfgRowStatus 1.3.6.1.4.1.2011.5.25.116.2.6.1.6
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQStaticARPCfgTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQStaticARPCfgTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwQinQStaticMACCfgTable 1.3.6.1.4.1.2011.5.25.116.2.7
The table is used to configure static MAC.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQStaticMACCfgEntry

hwQinQStaticMACCfgEntry 1.3.6.1.4.1.2011.5.25.116.2.7.1
The entry of an interface enabled the QinQ function.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQStaticMACCfgEntry  

hwQinQStaticMACCfgMac 1.3.6.1.4.1.2011.5.25.116.2.7.1.1
The MAC address.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwQinQStaticMACCfgVlan 1.3.6.1.4.1.2011.5.25.116.2.7.1.2
Vlan id that the MAC address belongs to.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

hwQinQStaticMACCfgVsiName 1.3.6.1.4.1.2011.5.25.116.2.7.1.3
Name of VSI that the MAC address belongs to.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwQinQStaticMACCfgPEVlan 1.3.6.1.4.1.2011.5.25.116.2.7.1.4
PE vlan id for a Network Management Application attempts to configure hwQinQStaticMACCfgTable.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

hwQinQStaticMACCfgCEVlan 1.3.6.1.4.1.2011.5.25.116.2.7.1.5
CE vlan id.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hwQinQStaticMACCfgType 1.3.6.1.4.1.2011.5.25.116.2.7.1.6
The type of the MAC.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), dynamid(1), static(2), blackhole(3), toobig(4)  

hwQinQStaticMACCfgIfIndex 1.3.6.1.4.1.2011.5.25.116.2.7.1.7
Index number of the interface.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

hwQinQStaticMACCfgFlag 1.3.6.1.4.1.2011.5.25.116.2.7.1.8
The config type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER vlan(1), vsi(2), mapping(3), qinqtermination(4), dot1qtermination(5)  

hwQinQStaticMACCfgRowStatus 1.3.6.1.4.1.2011.5.25.116.2.7.1.9
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQStaticMACCfgTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQStaticMACCfgTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwQinQSubIfDot1qTermTable 1.3.6.1.4.1.2011.5.25.116.2.8
Used to configure Dot1q-termination function in sub interface ,then packets transmitted from this sub interface input with one tag will be terminated.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQSubIfDot1qTermEntry

hwQinQSubIfDot1qTermEntry 1.3.6.1.4.1.2011.5.25.116.2.8.1
The entry of an interface enabled the Dot1q-termination function.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQSubIfDot1qTermEntry  

hwQinQSubIfDot1qTermIfIndex 1.3.6.1.4.1.2011.5.25.116.2.8.1.1
Index number of the Dot1q-termination interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQSubIfDot1qTermVidStart 1.3.6.1.4.1.2011.5.25.116.2.8.1.2
When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

hwQinQSubIfDot1qTermVidEnd 1.3.6.1.4.1.2011.5.25.116.2.8.1.3
When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

hwQinQSubIfDot1qTermGroupId 1.3.6.1.4.1.2011.5.25.116.2.8.1.4
Group-management id.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16  

hwQinQSubIfDot1qTermRowStatus 1.3.6.1.4.1.2011.5.25.116.2.8.1.5
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfDot1qTermTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQSubIfDot1qTermTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwQinQSubIfDot1qTermStatTable 1.3.6.1.4.1.2011.5.25.116.2.9
When a sub interface configured Dot1q-termination, hwQinQSubIfDot1qTermStatTable used to statistic total number of the out packets and in packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQSubIfDot1qTermStatEntry

hwQinQSubIfDot1qTermStatEntry 1.3.6.1.4.1.2011.5.25.116.2.9.1
The entry of an interface configured Dot1q-termination function.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQSubIfDot1qTermStatEntry  

hwQinQSubIfDot1qTermStatIfIndex 1.3.6.1.4.1.2011.5.25.116.2.9.1.1
Index number of the Dot1q-termination interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQSubIfDot1qTermStatCEVlan 1.3.6.1.4.1.2011.5.25.116.2.9.1.2
Inner vlan in packets which input the Dot1q-termination sub interface, used to indicate the packets as an index.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanId  

hwQinQSubIfDot1qTermStatGroupId 1.3.6.1.4.1.2011.5.25.116.2.9.1.3
The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..16  

hwQinQSubIfDot1qTermStatOutPackets 1.3.6.1.4.1.2011.5.25.116.2.9.1.4
Total number of out packets of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfDot1qTermStatOutBytes 1.3.6.1.4.1.2011.5.25.116.2.9.1.5
Total number of out bytes of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfDot1qTermStatInPackets 1.3.6.1.4.1.2011.5.25.116.2.9.1.6
Total number of in packets of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfDot1qTermStatInBytes 1.3.6.1.4.1.2011.5.25.116.2.9.1.7
Total number of in bytes of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfDot1qTermStatOutBdPackets 1.3.6.1.4.1.2011.5.25.116.2.9.1.8
Total number of broadcast packets transmitted out of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfDot1qTermStatInBdPackets 1.3.6.1.4.1.2011.5.25.116.2.9.1.9
Total number of broadcast packets received from the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfDot1qTermStatOutMuPackets 1.3.6.1.4.1.2011.5.25.116.2.9.1.10
Total number of multicast packets transmitted out of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfDot1qTermStatInMuPackets 1.3.6.1.4.1.2011.5.25.116.2.9.1.11
Total number of multicast packets received from the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfDot1qTermStatOutUniPackets 1.3.6.1.4.1.2011.5.25.116.2.9.1.12
Total number of unicast packets transmitted out of the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQSubIfDot1qTermStatInUniPackets 1.3.6.1.4.1.2011.5.25.116.2.9.1.13
Total number of unicast packets received from the sub interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwQinQModeCfgTable 1.3.6.1.4.1.2011.5.25.116.2.10
The table contains mode type and ethernet encapsulation type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQModeCfgEntry

hwQinQModeCfgEntry 1.3.6.1.4.1.2011.5.25.116.2.10.1
The mode type and ethernet encapsulation type of an interface entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQModeCfgEntry  

hwQinQModeCfgIfIndex 1.3.6.1.4.1.2011.5.25.116.2.10.1.1
Index number of the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQModeCfgMode 1.3.6.1.4.1.2011.5.25.116.2.10.1.2
Mode type of the interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER common(1), qinq(2)  

hwQinQEtherType 1.3.6.1.4.1.2011.5.25.116.2.10.1.3
The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 600..ffff  

hwQinQCeEtherType 1.3.6.1.4.1.2011.5.25.116.2.10.1.4
The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 600..ffff  

hwQinQCtrlVlanCfgTable 1.3.6.1.4.1.2011.5.25.116.2.11
The control-vlan id and control-vlan's attributes can be configured in sub interface. You must designate control-vlan as QinQ or Dot1q before configuring QinQ-termination function or Dot1q-termination function.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQCtrlVlanCfgEntry

hwQinQCtrlVlanCfgEntry 1.3.6.1.4.1.2011.5.25.116.2.11.1
The Control-vlan configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQCtrlVlanCfgEntry  

hwQinQCtrlVlanCfgIfIndex 1.3.6.1.4.1.2011.5.25.116.2.11.1.1
Index number of the sub interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQCtrlVlan 1.3.6.1.4.1.2011.5.25.116.2.11.1.2
Control-Vlan id.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

hwQinQSubIfType 1.3.6.1.4.1.2011.5.25.116.2.11.1.3
The type of sub interface.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER qinq(1), dot1q(2)  

hwQinQCtrlVlanFlag 1.3.6.1.4.1.2011.5.25.116.2.11.1.4
The service type of the sub interface, by setting hwQinQCtrlVlanFlag to the value (rtprotocolenable), the route-protocol attribute enabled; and by setting hwQinQCtrlVlanFlag to the value (localswitch), the localswitch attribute enabled, which means two tags of packets will be pruned. So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQCtrlVlanFlag as localswitch.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER rtprotocolenable(1), original(2), localswitch(3)  

hwQinQCtrlVlanRowStatus 1.3.6.1.4.1.2011.5.25.116.2.11.1.5
This table can be created and deleted.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwQinQFlexibleFlag 1.3.6.1.4.1.2011.5.25.116.2.11.1.6
The service type of the sub interface, by setting hwQinQFlexibleFlag to the value (flexibleenable), the flexible attribute enabled; So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQFlexibleFlag as flexibleenable.
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwQinQGroupCfgTable 1.3.6.1.4.1.2011.5.25.116.2.12
The group-management id and group's attributes can be configured in sub interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQGroupCfgEntry

hwQinQGroupCfgEntry 1.3.6.1.4.1.2011.5.25.116.2.12.1
Group configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQGroupCfgEntry  

hwQinQGroupCfgIfIndex 1.3.6.1.4.1.2011.5.25.116.2.12.1.1
Index number of the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQGroupId 1.3.6.1.4.1.2011.5.25.116.2.12.1.2
Group-management id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..16  

hwQinQGroupType 1.3.6.1.4.1.2011.5.25.116.2.12.1.3
The type of the group.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER single(1), multi(2)  

hwQinQGroupStat 1.3.6.1.4.1.2011.5.25.116.2.12.1.4
Whether the statistic function is enabled.
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwQinQGroupRowStatus 1.3.6.1.4.1.2011.5.25.116.2.12.1.5
This table can be created and deleted.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwQinQAsymmetryCfgTable 1.3.6.1.4.1.2011.5.25.116.2.13
The table to configure asymmetry attribution of the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQAsymmetryCfgEntry

hwQinQAsymmetryCfgEntry 1.3.6.1.4.1.2011.5.25.116.2.13.1
The entry of the asymmetry configure table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQAsymmetryCfgEntry  

hwQinQAsymmetryCfgIfIndex 1.3.6.1.4.1.2011.5.25.116.2.13.1.1
Index number of the QinQ-termination interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQSubIfAsymmetry 1.3.6.1.4.1.2011.5.25.116.2.13.1.2
The asymmetry attribution of the QinQ-termination interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER symmetry(1), asymmetry(2), transparent(3)  

hwQinQAsymmetryUserMode 1.3.6.1.4.1.2011.5.25.116.2.13.1.3
The user mode attribute of the QinQ-termination sub interface.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwQinQRemarkCfgTable 1.3.6.1.4.1.2011.5.25.116.2.14
Interface remark config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQRemarkCfgEntry

hwQinQRemarkCfgEntry 1.3.6.1.4.1.2011.5.25.116.2.14.1
The entry of the interface remark configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQRemarkCfgEntry  

hwQinQRemarkCfgIfIndex 1.3.6.1.4.1.2011.5.25.116.2.14.1.1
Index number of the sub interface, which should configure QinQ-termination function first.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQPriorityRemark 1.3.6.1.4.1.2011.5.25.116.2.14.1.2
The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER specify0(0), specify1(1), specify2(2), specify3(3), specify4(4), specify5(5), specify6(6), specify7(7), cevid(8), pevid(9)  

hwBpduTunnelIngressTable 1.3.6.1.4.1.2011.5.25.116.2.15
The table of bpdu tunnel ingress.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBpduTunnelIngressEntry

hwBpduTunnelIngressEntry 1.3.6.1.4.1.2011.5.25.116.2.15.1
The entry of of bpdu tunnel ingress.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBpduTunnelIngressEntry  

hwBpduTunnelIngressPortIndex 1.3.6.1.4.1.2011.5.25.116.2.15.1.1
Port index in interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

hwBpduTunnelBpduIngressMacIndex 1.3.6.1.4.1.2011.5.25.116.2.15.1.2
bpdu mac address list BPDU Dmac protocol 01-80-C2-00-00-00 stp01 01-80-C2-00-00-01 pauseFrame 01-80-C2-00-00-02 reserved02 01-80-C2-00-00-03 reserved03 01-80-C2-00-00-04 reserved04 01-80-C2-00-00-05 reserved05 01-80-C2-00-00-06 reserved06 01-80-C2-00-00-07 reserved07 01-80-C2-00-00-08 stp02 01-80-C2-00-00-09 reserved08 01-80-C2-00-00-0a hgmp 01-80-C2-00-00-0b reserved09 01-80-C2-00-00-0c reserved10 01-80-C2-00-00-0d reserved11 01-80-C2-00-00-0e reserved12 01-80-C2-00-00-0f reserved13 01-80-C2-00-00-10 reserved14 01-80-C2-00-00-11 reserved15 01-80-C2-00-00-12 reserved16 01-80-C2-00-00-13 reserved17 01-80-C2-00-00-14 isisLevel01 01-80-C2-00-00-15 isisLevel02 01-80-C2-00-00-16 reserved18 01-80-C2-00-00-17 reserved19 01-80-C2-00-00-18 reserved20 01-80-C2-00-00-19 reserved21 01-80-C2-00-00-1a reserved22 01-80-C2-00-00-1b reserved23 01-80-C2-00-00-1c reserved24 01-80-C2-00-00-1d reserved25 01-80-C2-00-00-1e reserved26 01-80-C2-00-00-1f reserved27 01-80-C2-00-00-20 gmrp 01-80-C2-00-00-21 gvrp 01-80-C2-00-00-22 reserved28 01-80-C2-00-00-23 reserved29 01-80-C2-00-00-24 reserved30 01-80-C2-00-00-25 reserved31 01-80-C2-00-00-26 reserved32 01-80-C2-00-00-27 reserved33 01-80-C2-00-00-28 reserved34 01-80-C2-00-00-29 reserved35 01-80-C2-00-00-2a reserved36 01-80-C2-00-00-2b reserved37 01-80-C2-00-00-2c reserved38 01-80-C2-00-00-2d reserved39 01-80-C2-00-00-2e reserved40 01-80-C2-00-00-2f reserved41
Status: current Access: not-accessible
OBJECT-TYPE    
  BpduIndex  

hwBpduTunnelIngressAddress 1.3.6.1.4.1.2011.5.25.116.2.15.1.3
Group mac address.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

hwBpduTunnelIngressRowStatus 1.3.6.1.4.1.2011.5.25.116.2.15.1.4
Bpdu tunnek ingress row status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwBpduTunnelEgressTable 1.3.6.1.4.1.2011.5.25.116.2.16
The table of bpdu tunnel egress.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBpduTunnelEgressEntry

hwBpduTunnelEgressEntry 1.3.6.1.4.1.2011.5.25.116.2.16.1
The entry of bpdu tunnel egress.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBpduTunnelEgressEntry  

hwBpduTunnelEgressPortIndex 1.3.6.1.4.1.2011.5.25.116.2.16.1.1
Port index in interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

hwBpduTunnelBpduEgressMacIndex 1.3.6.1.4.1.2011.5.25.116.2.16.1.2
Bpdu MAC address list BPDU DMAC protocol 01-80-C2-00-00-00 stp01 01-80-C2-00-00-01 pauseFrame 01-80-C2-00-00-02 reserved02 01-80-C2-00-00-03 reserved03 01-80-C2-00-00-04 reserved04 01-80-C2-00-00-05 reserved05 01-80-C2-00-00-06 reserved06 01-80-C2-00-00-07 reserved07 01-80-C2-00-00-08 stp02 01-80-C2-00-00-09 reserved08 01-80-C2-00-00-0a hgmp 01-80-C2-00-00-0b reserved09 01-80-C2-00-00-0c reserved10 01-80-C2-00-00-0d reserved11 01-80-C2-00-00-0e reserved12 01-80-C2-00-00-0f reserved13 01-80-C2-00-00-10 reserved14 01-80-C2-00-00-11 reserved15 01-80-C2-00-00-12 reserved16 01-80-C2-00-00-13 reserved17 01-80-C2-00-00-14 isisLevel01 01-80-C2-00-00-15 isisLevel02 01-80-C2-00-00-16 reserved18 01-80-C2-00-00-17 reserved19 01-80-C2-00-00-18 reserved20 01-80-C2-00-00-19 reserved21 01-80-C2-00-00-1a reserved22 01-80-C2-00-00-1b reserved23 01-80-C2-00-00-1c reserved24 01-80-C2-00-00-1d reserved25 01-80-C2-00-00-1e reserved26 01-80-C2-00-00-1f reserved27 01-80-C2-00-00-20 gmrp 01-80-C2-00-00-21 gvrp 01-80-C2-00-00-22 reserved28 01-80-C2-00-00-23 reserved29 01-80-C2-00-00-24 reserved30 01-80-C2-00-00-25 reserved31 01-80-C2-00-00-26 reserved32 01-80-C2-00-00-27 reserved33 01-80-C2-00-00-28 reserved34 01-80-C2-00-00-29 reserved35 01-80-C2-00-00-2a reserved36 01-80-C2-00-00-2b reserved37 01-80-C2-00-00-2c reserved38 01-80-C2-00-00-2d reserved39 01-80-C2-00-00-2e reserved40 01-80-C2-00-00-2f reserved41.
Status: current Access: not-accessible
OBJECT-TYPE    
  BpduIndex  

hwBpduTunnelEgressAddress 1.3.6.1.4.1.2011.5.25.116.2.16.1.3
Group mac address.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

hwBpduTunnelEgressRowStatus 1.3.6.1.4.1.2011.5.25.116.2.16.1.4
Row Status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwBpduTunnelVlanTable 1.3.6.1.4.1.2011.5.25.116.2.17
The table of port bpdu tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBpduTunnelVlanEntry

hwBpduTunnelVlanEntry 1.3.6.1.4.1.2011.5.25.116.2.17.1
The entry of port bpdu tunnel vlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBpduTunnelVlanEntry  

hwBpduTunnelPortIndex 1.3.6.1.4.1.2011.5.25.116.2.17.1.1
Port index in interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

hwBpduTunnelEnable 1.3.6.1.4.1.2011.5.25.116.2.17.1.2
Bpdu tunnel enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hwBpduTunnelVlanListLow 1.3.6.1.4.1.2011.5.25.116.2.17.1.3
Vlan bpdu tunnel in port.
Status: current Access: read-write
OBJECT-TYPE    
  VlanList  

hwBpduTunnelVlanListHigh 1.3.6.1.4.1.2011.5.25.116.2.17.1.4
Vlan bpdu tunnel in port.
Status: current Access: read-write
OBJECT-TYPE    
  VlanList  

hwBpduTunnelTable 1.3.6.1.4.1.2011.5.25.116.2.18
The table of bpdu tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBpduTunnelEntry

hwBpduTunnelEntry 1.3.6.1.4.1.2011.5.25.116.2.18.1
The entry of of bpdu tunnel.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBpduTunnelEntry  

hwBpduTunnelBpduIndex 1.3.6.1.4.1.2011.5.25.116.2.18.1.1
Bpdu mac address list BPDU Dmac protocol 01-80-C2-00-00-00 stp01 (1) 01-80-C2-00-00-01 pauseFrame (2) 01-80-C2-00-00-02 reserved02 (3) 01-80-C2-00-00-03 reserved03 (4) 01-80-C2-00-00-04 reserved04 (5) 01-80-C2-00-00-05 reserved05 (6) 01-80-C2-00-00-06 reserved06 (7) 01-80-C2-00-00-07 reserved07 (8) 01-80-C2-00-00-08 stp02 (9) 01-80-C2-00-00-09 reserved08 (10) 01-80-C2-00-00-0a hgmp (11) 01-80-C2-00-00-0b reserved09 (12) 01-80-C2-00-00-0c reserved10 (13) 01-80-C2-00-00-0d reserved11 (14) 01-80-C2-00-00-0e reserved12 (15) 01-80-C2-00-00-0f reserved13 (16) 01-80-C2-00-00-10 reserved14 (17) 01-80-C2-00-00-11 reserved15 (18) 01-80-C2-00-00-12 reserved16 (19) 01-80-C2-00-00-13 reserved17 (20) 01-80-C2-00-00-14 isisLevel01 (21) 01-80-C2-00-00-15 isisLevel02 (22) 01-80-C2-00-00-16 reserved18 (23) 01-80-C2-00-00-17 reserved19 (24) 01-80-C2-00-00-18 reserved20 (25) 01-80-C2-00-00-19 reserved21 (26) 01-80-C2-00-00-1a reserved22 (27) 01-80-C2-00-00-1b reserved23 (28) 01-80-C2-00-00-1c reserved24 (29) 01-80-C2-00-00-1d reserved25 (30) 01-80-C2-00-00-1e reserved26 (31) 01-80-C2-00-00-1f reserved27 (32) 01-80-C2-00-00-20 gmrp (33) 01-80-C2-00-00-21 gvrp (34) 01-80-C2-00-00-22 reserved28 (35) 01-80-C2-00-00-23 reserved29 (36) 01-80-C2-00-00-24 reserved30 (37) 01-80-C2-00-00-25 reserved31 (38) 01-80-C2-00-00-26 reserved32 (39) 01-80-C2-00-00-27 reserved33 (40) 01-80-C2-00-00-28 reserved34 (41) 01-80-C2-00-00-29 reserved35 (42) 01-80-C2-00-00-2a reserved36 (43) 01-80-C2-00-00-2b reserved37 (44) 01-80-C2-00-00-2c reserved38 (45) 01-80-C2-00-00-2d reserved39 (46) 01-80-C2-00-00-2e reserved40 (47) 01-80-C2-00-00-2f reserved41 (48) 01-80-C2-00-00-02 lacp (49) 01-00-0C-CC-CC-CC cdp (50) 01-00-0C-CC-CC-CC pagp (51) 01-00-0C-CC-CC-CC udld (52) 01-00-0C-CC-CC-CC vtp (53) .
Status: current Access: not-accessible
OBJECT-TYPE    
  BpduIndex  

hwBpduTunnelBpduEnable 1.3.6.1.4.1.2011.5.25.116.2.18.1.2
Bpdu tunnel enable or disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hwBpduTunnelMultiAddress 1.3.6.1.4.1.2011.5.25.116.2.18.1.3
Group MAC address.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

hwBpduTunnelRowStatus 1.3.6.1.4.1.2011.5.25.116.2.18.1.4
Row Status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwQinQSwapCfgTable 1.3.6.1.4.1.2011.5.25.116.2.19
This table describes the vlan swap configurations of interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQSwapCfgEntry

hwQinQSwapCfgEntry 1.3.6.1.4.1.2011.5.25.116.2.19.1
An entry is created for each active ethernet type interface in the device and deleted when the interface been not exist.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQSwapCfgEntry  

hwQinQSwapCfgIfIndex 1.3.6.1.4.1.2011.5.25.116.2.19.1.1
Index number of the interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQSwapCfgFlag 1.3.6.1.4.1.2011.5.25.116.2.19.1.2
QinQ swap flag of the interface, which indicates whether to swap the two vlan tags or not when the interface receives a packet with two 802.1q tags.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

hwQinQSubIfMapTable 1.3.6.1.4.1.2011.5.25.116.2.20
The table is used to configure QinQ-mapping function in sub interface, then packets transmitted from this sub interface input with one or two tags will be mapped to other tag or tags.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQSubIfMapEntry

hwQinQSubIfMapEntry 1.3.6.1.4.1.2011.5.25.116.2.20.1
The entry of an interface enabled the QinQ-Map function.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQSubIfMapEntry  

hwQinQSubIfMapIfIndex 1.3.6.1.4.1.2011.5.25.116.2.20.1.1
Index number of the QinQ-Map interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQSubIfPEVlan 1.3.6.1.4.1.2011.5.25.116.2.20.1.2
Outer vlan id of the packets which have two tags before being Mapped.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..4094  

hwQinQSubIfCEVlanStart 1.3.6.1.4.1.2011.5.25.116.2.20.1.3
Inner start vlan id of the packets which have two tags before being Mapped.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4094  

hwQinQSubIfCEVlanEnd 1.3.6.1.4.1.2011.5.25.116.2.20.1.4
Inner end vlan id of the packets which have two tags before being Mapped.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

hwQinQSubIfPEVlanMap 1.3.6.1.4.1.2011.5.25.116.2.20.1.5
Outer vlan id of the packets which have two tags after being Mapped.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..4094  

hwQinQSubIfPEEtherType 1.3.6.1.4.1.2011.5.25.116.2.20.1.6
EtherType of Pe Mapped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 600..ffff  

hwQinQSubIfCEVlanMap 1.3.6.1.4.1.2011.5.25.116.2.20.1.7
Inner vlan id of the packets which have two tags after being Mapped.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..4094  

hwQinQSubIfCEEtherType 1.3.6.1.4.1.2011.5.25.116.2.20.1.8
EtherType of Ce Mapped.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 600..ffff  

hwQinQSubIfMapGroupId 1.3.6.1.4.1.2011.5.25.116.2.20.1.9
Group-management id.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..16  

hwQinQSubIfMapPe8021p 1.3.6.1.4.1.2011.5.25.116.2.20.1.10
The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER specify0(0), specify1(1), specify2(2), specify3(3), specify4(4), specify5(5), specify6(6), specify7(7)  

hwQinQSubIfMapCe8021p 1.3.6.1.4.1.2011.5.25.116.2.20.1.11
The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER specify0(0), specify1(1), specify2(2), specify3(3), specify4(4), specify5(5), specify6(6), specify7(7)  

hwQinQSubIfMapCetoPeFlag 1.3.6.1.4.1.2011.5.25.116.2.20.1.12
The service type of the sub interface, by setting MapCetoPeFlag to the value (CetoPeenable), the 8021p CetoPeenable attribute enabled.
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

hwQinQSubIfMapRowStatus 1.3.6.1.4.1.2011.5.25.116.2.20.1.13
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfMapTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfMapTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwQinQStackingVlanCfgTable 1.3.6.1.4.1.2011.5.25.116.2.21
QinQ Stacking Vlan configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwQinQStackingVlanCfgEntry

hwQinQStackingVlanCfgEntry 1.3.6.1.4.1.2011.5.25.116.2.21.1
This object indicates the configuration table for QinQ Stacking Vlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwQinQStackingVlanCfgEntry  

hwQinQStackingVlanCfgIfIndex 1.3.6.1.4.1.2011.5.25.116.2.21.1.1
This object indicates the Index number of the vlanif interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

hwQinQStackingVlanCfgVlanId 1.3.6.1.4.1.2011.5.25.116.2.21.1.2
This object indicates the outer vlan id for QinQ Stacking Vlan.
Status: current Access: read-create
OBJECT-TYPE    
  VlanId  

hwQinQStackingVlanCfgRowStatus 1.3.6.1.4.1.2011.5.25.116.2.21.1.50
This object indicates the RowStatus of hwQinQStackingVlanTable.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwQinQConformance 1.3.6.1.4.1.2011.5.25.116.3
OBJECT IDENTIFIER    

hwQinQGroups 1.3.6.1.4.1.2011.5.25.116.3.1
OBJECT IDENTIFIER    

hwQinQCompliances 1.3.6.1.4.1.2011.5.25.116.3.2
OBJECT IDENTIFIER    

hwQinQCompliance 1.3.6.1.4.1.2011.5.25.116.3.2.1
The core compliance statement for all implementations.
Status: current Access: read-create
MODULE-COMPLIANCE    

hwQinQSystemBaseGroup 1.3.6.1.4.1.2011.5.25.116.3.1.1
A collection of objects providing device level control and status information for the system.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQBpduTunnelGroup 1.3.6.1.4.1.2011.5.25.116.3.1.2
A collection of objects providing device level control and status information for the interface.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQSubIfVlanStackingGroup 1.3.6.1.4.1.2011.5.25.116.3.1.3
A collection of objects providing device level control and status information for the sub interface.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQSubIfStackingStatGroup 1.3.6.1.4.1.2011.5.25.116.3.1.4
A collection of objects providing device level control and status information for the sub interface.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQSubIfTermGroup 1.3.6.1.4.1.2011.5.25.116.3.1.5
A collection of objects providing device level control and status information for the sub interface.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQSubIfTermStatGroup 1.3.6.1.4.1.2011.5.25.116.3.1.6
A collection of objects providing device level control and status information for the sub interface.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQStaticARPCfgGroup 1.3.6.1.4.1.2011.5.25.116.3.1.7
A collection of items of static ARP table.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQStaticMACCfgGroup 1.3.6.1.4.1.2011.5.25.116.3.1.8
A collection of items of static MAC table.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQSubIfDot1qTermGroup 1.3.6.1.4.1.2011.5.25.116.3.1.9
A collection of items of Dot1q-termination table.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQSubIfDot1qTermStatGroup 1.3.6.1.4.1.2011.5.25.116.3.1.10
A collection of items of Dot1q-termination statistic table.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQModeCfgGroup 1.3.6.1.4.1.2011.5.25.116.3.1.11
A collection of items of Mode config table.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQCtrlVlanCfgGroup 1.3.6.1.4.1.2011.5.25.116.3.1.12
A collection of items of Control vlan table.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQGroupCfgGroup 1.3.6.1.4.1.2011.5.25.116.3.1.13
A collection of items of group table.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQAsymmetryCfgGroup 1.3.6.1.4.1.2011.5.25.116.3.1.14
A collection of items of asymmetry config table.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQRemarkCfgGroup 1.3.6.1.4.1.2011.5.25.116.3.1.15
A collection of items of Mode config table.
Status: current Access: read-create
OBJECT-GROUP    

hwBpduTunnelIngressGroup 1.3.6.1.4.1.2011.5.25.116.3.1.16
A collection of items of Group Mac table.
Status: current Access: read-create
OBJECT-GROUP    

hwBpduTunnelEgressGroup 1.3.6.1.4.1.2011.5.25.116.3.1.17
A collection of items of Group Mac table.
Status: current Access: read-create
OBJECT-GROUP    

hwBpduTunnelVlanGroup 1.3.6.1.4.1.2011.5.25.116.3.1.18
A collection of items of Mode port bpdu tunnel table.
Status: current Access: read-create
OBJECT-GROUP    

hwBpduTunnelGroup 1.3.6.1.4.1.2011.5.25.116.3.1.19
A collection of items of bpdu tunnel mac table.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQSwapCfgGroup 1.3.6.1.4.1.2011.5.25.116.3.1.20
A collection of items of Swap config table.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQSubIfMapGroup 1.3.6.1.4.1.2011.5.25.116.3.1.21
A collection of objects providing device level control and status information for the sub interface.
Status: current Access: read-create
OBJECT-GROUP    

hwQinQStackingVlanCfgGroup 1.3.6.1.4.1.2011.5.25.116.3.1.22
A collection of items of QinQ Stacking Vlan config table.
Status: current Access: read-create
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor