HUAWEI-WLAN-CONFIGURATION-MIB

File: HUAWEI-WLAN-CONFIGURATION-MIB.mib (538684 bytes)

Imported modules

HUAWEI-WLAN-MIB HUAWEI-WLAN-AP-MIB HUAWEI-WLAN-AP-RADIO-MIB
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC

Imported symbols

hwWlan hwWlanApName hwWlanRadioID
OBJECT-GROUP MODULE-COMPLIANCE NOTIFICATION-GROUP
IpAddress Integer32 Unsigned32
Counter64 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE MacAddress RowStatus
DateAndTime

Defined Types

HwWlanCommitEntry  
SEQUENCE    
  hwWlanCommitApMac MacAddress
  hwWlanConfigCommit Integer32

HwWlanBLEMonitorListEntry  
SEQUENCE    
  hwWlanBLEMonitoringListMac MacAddress
  hwWlanBLEMonitoringListRowStatue RowStatus

HwWlanApMacWhitelistEntry  
SEQUENCE    
  hwWlanApMacWhitelistMacAddr MacAddress
  hwWlanApMacWhitelistRowStatus RowStatus

HwWlanApSnWhitelistEntry  
SEQUENCE    
  hwWlanApSnWhitelistSn OCTET STRING
  hwWlanApSnWhitelistRowStatus RowStatus

HwWlanApMacBlacklistEntry  
SEQUENCE    
  hwWlanApMacBlacklistMacAddr MacAddress
  hwWlanApMacBlacklistRowStatus RowStatus

HwAPGroupEntry  
SEQUENCE    
  hwAPGroupName OCTET STRING
  hwAPGrpAPSystemProfile OCTET STRING
  hwAPGrpDomainProfile OCTET STRING
  hwAPGrpRowStatus RowStatus
  hwAPGrpWidsProfile OCTET STRING
  hwAPGrpBleProfile OCTET STRING

HwAPGroupWiredPortEntry  
SEQUENCE    
  hwAPGrpWPInterfaceType INTEGER
  hwAPGrpWPInterfaceNum Unsigned32
  hwAPGrpWPProfile OCTET STRING
  hwAPGrpWPRowStatus RowStatus

HwAPGroupRadioEntry  
SEQUENCE    
  hwAPGrpRadioId Unsigned32
  hwAPGrpRadio5gProfile OCTET STRING
  hwAPGrpMeshProfile OCTET STRING
  hwAPGrpWdsProfile OCTET STRING
  hwAPGrpLocationProfile OCTET STRING
  hwAPGrpRadioRowStatus RowStatus
  hwAPGrpRadio2gProfile OCTET STRING
  hwAPGrpMeshWhitelistProfile OCTET STRING
  hwAPGrpWdsWhitelistProfile OCTET STRING
  hwAPGrpRadioSwitch INTEGER
  hwAPGrpRadioChannel Unsigned32
  hwAPGrpRadioBandwidth INTEGER
  hwAPGrpRadioEirp Unsigned32
  hwAPGrpRadioAntennaGain Unsigned32
  hwAPGrpRadioCoverageDistance Unsigned32
  hwAPGrpRadioWorkMode INTEGER
  hwAPGrpRadioFrequency INTEGER
  hwAPGrpSpectrumAnalysisSwitch INTEGER
  hwAPGrpWidsDeviceDetectSwitch INTEGER
  hwAPGrpWidsAttackDetectEnBmp Unsigned32
  hwAPGrpWidsRogueContainSwitch INTEGER
  hwAPGrpRadioSecondChannel Unsigned32

HwAPGroupVapEntry  
SEQUENCE    
  hwAPGrpWlanId Unsigned32
  hwAPGrpVapProfile OCTET STRING
  hwAPGrpVapRowStatus RowStatus

HwAPSpecificEntry  
SEQUENCE    
  hwAPSpAPSystemProfile OCTET STRING
  hwAPSpDomainProfile OCTET STRING
  hwAPSpRowStatus RowStatus
  hwAPSpApMac MacAddress
  hwAPSpApId Unsigned32
  hwAPSpApTypeInfo OCTET STRING
  hwAPSpWidsProfile OCTET STRING
  hwAPSpBleProfile OCTET STRING
  hwAPSpLongitude OCTET STRING
  hwAPSpLatitude OCTET STRING
  hwAPSpApAddressMode INTEGER
  hwAPSpApIPv4Address IpAddress
  hwAPSpApIPv4Mask IpAddress
  hwAPSpApIPv4Gateway IpAddress
  hwAPSpApIPv6Address OCTET STRING
  hwAPSpApIPv6PrefixLen Integer32
  hwAPSpApIPv6Gateway OCTET STRING
  hwAPSpIPv4ACList OCTET STRING
  hwAPSpIPv6ACList OCTET STRING
  hwAPSpGroupName OCTET STRING
  hwAPSpApName OCTET STRING

HwAPSpecificWiredPortEntry  
SEQUENCE    
  hwAPSpWPInterfaceType INTEGER
  hwAPSpWPInterfaceNum Unsigned32
  hwAPSpWPProfile OCTET STRING
  hwAPSpWPRowStatus RowStatus
  hwAPSpWPApId Unsigned32

HwAPSpecificRadioEntry  
SEQUENCE    
  hwAPSpRadio Unsigned32
  hwAPSp5gRadioProfile OCTET STRING
  hwAPSpMeshProfile OCTET STRING
  hwAPSpWdsProfile OCTET STRING
  hwAPSpLocationProfile OCTET STRING
  hwAPSpRadioRowStatus RowStatus
  hwAPSpRadio2gProfile OCTET STRING
  hwAPSpMeshWhitelistProfile OCTET STRING
  hwAPSpWdsWhitelistProfile OCTET STRING
  hwAPSpRadioSwitch INTEGER
  hwAPSpRadioChannel Unsigned32
  hwAPSpRadioBandwidth INTEGER
  hwAPSpRadioEirp Unsigned32
  hwAPSpRadioAntennaGain Unsigned32
  hwAPSpRadioCoverageDistance Unsigned32
  hwAPSpRadioWorkMode INTEGER
  hwAPSpRadioFrequency INTEGER
  hwAPSpSpectrumAnalysisSwitch INTEGER
  hwAPSpWidsDeviceDetectSwitch INTEGER
  hwAPSpWidsAttackDetectEnBmp Unsigned32
  hwAPSpWidsRogueContainSwitch INTEGER
  hwAPSpRadioApId Unsigned32
  hwAPSpRadioSecondChannel Unsigned32

HwAPSpecificVapEntry  
SEQUENCE    
  hwAPSpWlan Unsigned32
  hwAPSpVapProfile OCTET STRING
  hwAPSpVapRowStatus RowStatus
  hwAPSpVapApId Unsigned32

HwRegulatoryDomainProfileEntry  
SEQUENCE    
  hwRegulatoryDomainProfileName OCTET STRING
  hwCountryCode OCTET STRING
  hwDcaChannel5GBandwidth INTEGER
  hwDcaChannel5GChannelSet OCTET STRING
  hwDcaChannel2GChannelSet OCTET STRING
  hwRegulatoryDomainProfilRowStatus RowStatus
  hwWlanWideBandEnable INTEGER

HwApSystemProfileEntry  
SEQUENCE    
  hwApSystemProfName OCTET STRING
  hwApProfStatInterval Unsigned32
  hwApProfSampleTime Unsigned32
  hwApProfLedSwitch INTEGER
  hwApProfMaxStaNum Unsigned32
  hwApProfMtu Unsigned32
  hwApProfMeshRole INTEGER
  hwApProfTemporaryManagement INTEGER
  hwApProfManagementVlan Unsigned32
  hwApProfHighTempThreshold Unsigned32
  hwApProfLowTempThreshold Integer32
  hwApProfOpHRxPowerThreshold Unsigned32
  hwApProfOpLRxPowerThreshold Unsigned32
  hwApProfOpHTempThreshold Unsigned32
  hwApProfOpLTempThreshold Integer32
  hwApProfMemoryUsageThreshold Unsigned32
  hwApProfCpuUsageThreshold Unsigned32
  hwApProfTelnetSwitch INTEGER
  hwApProfSTelnetSwitch INTEGER
  hwApProfConsoleSwitch INTEGER
  hwApProfLogRecordLevel INTEGER
  hwApProfLogServerIp IpAddress
  hwApProfLogServerIpv6 OCTET STRING
  hwApProfAlarmRestrictionSwitch INTEGER
  hwApProfAlarmRestrictionPeriod Unsigned32
  hwApProfKeepServiceSwitch INTEGER
  hwApProfProtectPriority Unsigned32
  hwApProfProtectACIp IpAddress
  hwApProfProtectACIpv6 OCTET STRING
  hwApProfEapStartMode INTEGER
  hwApProfEapStartTransform INTEGER
  hwApProfEapStartUnicastMac MacAddress
  hwApProfEapResponseMode INTEGER
  hwApProfEapResponseTransform INTEGER
  hwApProfEapResponseUnicastMac MacAddress
  hwApProfLldpRestartDelay Unsigned32
  hwApProfLldpAdminStatus INTEGER
  hwApProfLldpRetransDelay Unsigned32
  hwApProfLldpRetransHoldMultiplier Unsigned32
  hwApProfLldpInterval Unsigned32
  hwApProfLldpReportInterval Unsigned32
  hwApProfStaAccessMode INTEGER
  hwApProfStaAccessModeProfile OCTET STRING
  hwApProfRowStatus RowStatus
  hwApProfSFTPSwitch INTEGER
  hwApProfDynamicBlackListAgingTime Unsigned32
  hwApProfAntennaOutputMode INTEGER
  hwApProfMppActiveReselectionSwitch INTEGER
  hwApProfSpectrumServerIPAddress IpAddress
  hwApProfSpectrumServerIPv6Address OCTET STRING
  hwApProfSpectrumServerPort Unsigned32
  hwApProfSpectrumViaACSwitch INTEGER
  hwApProfSpectrumViaACPort Unsigned32
  hwApProfSpectrumNonWifiDeviceAgingTime Unsigned32
  hwApProfPoeMaxPower Unsigned32
  hwApProfPoePowerReserved Unsigned32
  hwApProfPoePowerThreshold Unsigned32
  hwApProfPoeAfInrushSwitch INTEGER
  hwApProfPoeHighInrushSwitch INTEGER
  hwApProfPrimaryLinkIPv4 IpAddress
  hwApProfPrimaryLinkIPv6 OCTET STRING
  hwApProfBackupLinkIPv4 IpAddress
  hwApProfBackupLinkIPv6 OCTET STRING
  hwApProfLedOffTimeRange OCTET STRING
  hwApProfUsbSwitch INTEGER
  hwApProfBroadcastSuppressionArpEnable INTEGER
  hwApProfBroadcastSuppressionArpThreshold Unsigned32
  hwApProfBroadcastSuppressionIgmpEnable INTEGER
  hwApProfBroadcastSuppressionIgmpThreshold Unsigned32
  hwApProfBroadcastSuppressionNdEnable INTEGER
  hwApProfBroadcastSuppressionNdThreshold Unsigned32
  hwApProfBroadcastSuppressionOtherEnable INTEGER
  hwApProfBroadcastSuppressionOtherThreshold Unsigned32
  hwApProfBroadcastSuppressionAllEnable INTEGER

HwAPWiredPortProfileEntry  
SEQUENCE    
  hwAPWiredPortProfileName OCTET STRING
  hwAPWiredPortPortLinkProfileName OCTET STRING
  hwAPWiredPortProfilePortDesc OCTET STRING
  hwAPWiredPortProfilePortEthTrunkID Unsigned32
  hwAPWiredPortProfilePortSTPSwitch INTEGER
  hwAPWiredPortProfilePortMode INTEGER
  hwAPWiredPortProfilePortVlanPvid Unsigned32
  hwAPWiredPortProfilePortVlanTagged OCTET STRING
  hwAPWiredPortProfilePortVlanUntagged OCTET STRING
  hwAPWiredPortProfileUserIsolate INTEGER
  hwAPWiredPortProfileDhcpTrust INTEGER
  hwAPWiredPortProfileNdTrust INTEGER
  hwAPWiredPortProfileRowStatus RowStatus
  hwAPWiredPortProfileLearnAddress INTEGER
  hwAPWiredPortProfileIpBindCheck INTEGER
  hwAPWiredPortProfileArpBindCheck INTEGER
  hwAPWiredPortProfileSTPAutoShutdown INTEGER
  hwAPWiredPortProfileSTPAutoShutdownRecoveryTime Unsigned32
  hwAPWiredPortProfileTrafficOptimizeSuppressionBc Unsigned32
  hwAPWiredPortProfileTrafficOptimizeSuppressionUc Unsigned32
  hwAPWiredPortProfileTrafficOptimizeSuppressionMc Unsigned32
  hwAPWiredPortProfileIGMPSnooping INTEGER

HwAPWiredPortProfileTrafficFilterEntry  
SEQUENCE    
  hwAPWiredPortProfileTrafficFilterDirection INTEGER
  hwAPWiredPortProfileTrafficFilterType INTEGER
  hwAPWiredPortProfileTrafficFilterAclID Integer32
  hwAPWiredPortProfileTrafficFilterRowStatus RowStatus

HwAPPortLinkProfileEntry  
SEQUENCE    
  hwAPPortLinkProfileName OCTET STRING
  hwAPPortLinkProfileLldpEnable INTEGER
  hwAPPortLinkProfileLldpTlvType Unsigned32
  hwAPPortLinkProfileCrcAlarmEnable INTEGER
  hwAPPortLinkProfileCrcAlarmThreshold Unsigned32
  hwAPPortLinkProfileCrcAlarmResumeThreshold Unsigned32
  hwAPPortLinkProfileRowStatus RowStatus
  hwAPPortLinkProfilePoeSwitch INTEGER
  hwAPPortLinkProfilePoePriority INTEGER
  hwAPPortLinkProfilePoeForcePowerSwitch INTEGER
  hwAPPortLinkProfilePoeLegacySwitch INTEGER
  hwAPPortLinkProfilePoeOffTimeRange OCTET STRING
  hwAPPortLinkProfileAdminStatus INTEGER
  hwAPPortLinkProfileEEESwitch INTEGER

Hw2gRadioProfileEntry  
SEQUENCE    
  hw2gRadioProfileName OCTET STRING
  hw2gRadioBeaconInterval Unsigned32
  hw2gRadioGuardIntervalMode INTEGER
  hw2gRadioShortPreamble INTEGER
  hw2gRadioFragmentationThreshold Integer32
  hw2gRadioHtAmpduSwitch INTEGER
  hw2gRadioHtAmpduMaxLengthExponent Integer32
  hw2gRadioDot11bgBasicRate Unsigned32
  hw2gRadioDot11bgSupportRate Unsigned32
  hw2gRadioMulticastRate Unsigned32
  hw2gRadioWmmMandatorySwitch INTEGER
  hw2gRadioApEDCAVoiceECWmax Unsigned32
  hw2gRadioApEDCAVoiceECWmin Unsigned32
  hw2gRadioApEDCAVoiceAIFSN Unsigned32
  hw2gRadioApEDCAVoiceTXOPLimit Unsigned32
  hw2gRadioApEDCAVoiceAckPolicy INTEGER
  hw2gRadioApEDCAVideoECWmax Unsigned32
  hw2gRadioApEDCAVideoECWmin Unsigned32
  hw2gRadioApEDCAVideoAIFSN Unsigned32
  hw2gRadioApEDCAVideoTXOPLimit Unsigned32
  hw2gRadioApEDCAVideoAckPolicy INTEGER
  hw2gRadioApEDCABEECWmax Unsigned32
  hw2gRadioApEDCABEECWmin Unsigned32
  hw2gRadioApEDCABEAIFSN Unsigned32
  hw2gRadioApEDCABETXOPLimit Unsigned32
  hw2gRadioApEDCABEAckPolicy INTEGER
  hw2gRadioApEDCABKECWmax Unsigned32
  hw2gRadioApEDCABKECWmin Unsigned32
  hw2gRadioApEDCABKAIFSN Unsigned32
  hw2gRadioApEDCABKTXOPLimit Unsigned32
  hw2gRadioApEDCABKAckPolicy INTEGER
  hw2gRadioWmmSwitch INTEGER
  hw2gRadioRtsCtsThreshold Unsigned32
  hw2gRadioRtsCtsMode INTEGER
  hw2gRadioPowerAutoAdjustSwitch INTEGER
  hw2gRadioBeamformingSwitch INTEGER
  hw2gRadioWifiLight INTEGER
  hw2gRadioChannelSwitchAnnouncementSwitch INTEGER
  hw2gRadioChannelSwitchMode INTEGER
  hw2gRadioAutoOffServiceSwitch INTEGER
  hw2gRadioAutoOffServiceStartTime OCTET STRING
  hw2gRadioAutoOffServiceEndTime OCTET STRING
  hw2gRadioInterferenceDetectSwitch INTEGER
  hw2gRadioInterferenceIntraFrequencyThreshold Unsigned32
  hw2gRadioInterferenceAdjacentFrequencyThreshold Unsigned32
  hw2gRadioInterferenceStationThreshold Unsigned32
  hw2gRadioRrmProfile OCTET STRING
  hw2gRadioAirScanProfile OCTET STRING
  hw2gRadioProfileRowStatus RowStatus
  hw2gRadioProfileUtmostPowerSwitch INTEGER
  hw2gRadioProfileRadioType INTEGER
  hw2gRadioProfileSmartAntennaEnable INTEGER
  hw2gRadioProfileTxChainNum Unsigned32
  hw2gRadioProfileRxChainNum Unsigned32
  hw2gRadioProfileAutoOffTimeRange OCTET STRING

Hw5gRadioProfileEntry  
SEQUENCE    
  hw5gRadioProfileName OCTET STRING
  hw5gRadioBeaconInterval Unsigned32
  hw5gRadioGuardIntervalMode INTEGER
  hw5gRadioShortPreamble INTEGER
  hw5gRadioFragmentationThreshold Unsigned32
  hw5gRadioHtAmpduSwitch INTEGER
  hw5gRadioHtAmpduMaxLengthExponent Unsigned32
  hw5gRadioVhtAmpduMaxLengthExponent Integer32
  hw5gRadioVhtAmsduSwitch INTEGER
  hw5gRadioVhtAmsduMaxFrameNum Unsigned32
  hw5gRadioDot11aBasicRate Unsigned32
  hw5gRadioDot11aSupportRate Unsigned32
  hw5gRadioMulticastRate Unsigned32
  hw5gRadioVhtNssMapMaxMcs OCTET STRING
  hw5gRadioWmmMandatorySwitch INTEGER
  hw5gRadioApEDCAVoiceECWmax Unsigned32
  hw5gRadioApEDCAVoiceECWmin Unsigned32
  hw5gRadioApEDCAVoiceAIFSN Unsigned32
  hw5gRadioApEDCAVoiceTXOPLimit Unsigned32
  hw5gRadioApEDCAVoiceAckPolicy INTEGER
  hw5gRadioApEDCAVideoECWmax Unsigned32
  hw5gRadioApEDCAVideoECWmin Unsigned32
  hw5gRadioApEDCAVideoAIFSN Unsigned32
  hw5gRadioApEDCAVideoTXOPLimit Unsigned32
  hw5gRadioApEDCAVideoAckPolicy INTEGER
  hw5gRadioApEDCABEECWmax Unsigned32
  hw5gRadioApEDCABEECWmin Unsigned32
  hw5gRadioApEDCABEAIFSN Unsigned32
  hw5gRadioApEDCABETXOPLimit Unsigned32
  hw5gRadioApEDCABEAckPolicy INTEGER
  hw5gRadioApEDCABKECWmax Unsigned32
  hw5gRadioApEDCABKECWmin Unsigned32
  hw5gRadioApEDCABKAIFSN Unsigned32
  hw5gRadioApEDCABKTXOPLimit Unsigned32
  hw5gRadioApEDCABKAckPolicy INTEGER
  hw5gRadioWmmSwitch INTEGER
  hw5gRadioRtsCtsThreshold Unsigned32
  hw5gRadioRtsCtsMode INTEGER
  hw5gRadioPowerAutoAdjustSwitch INTEGER
  hw5gRadioBeamformingSwitch INTEGER
  hw5gRadioWifiLight INTEGER
  hw5gRadioChannelSwitchAnnouncementSwitch INTEGER
  hw5gRadioChannelSwitchMode INTEGER
  hw5gRadioAutoOffServiceSwitch INTEGER
  hw5gRadioAutoOffServiceStartTime OCTET STRING
  hw5gRadioAutoOffServiceEndTime OCTET STRING
  hw5gRadioInterferenceDetectSwitch INTEGER
  hw5gRadioInterferenceIntraFrequencyThreshold Unsigned32
  hw5gRadioInterferenceAdjacentFrequencyThreshold Unsigned32
  hw5gRadioInterferenceStationThreshold Unsigned32
  hw5gRadioRrmProfile OCTET STRING
  hw5gRadioAirScanProfile OCTET STRING
  hw5gRadioProfileRowStatus RowStatus
  hw5gRadioProfileUtmostPowerSwitch INTEGER
  hw5gRadioProfileRadioType INTEGER
  hw5gRadioProfileSmartAntennaEnable INTEGER
  hw5gRadioProfileMuMIMOEnable INTEGER
  hw5gRadioProfileTxChainNum Unsigned32
  hw5gRadioProfileRxChainNum Unsigned32
  hw5gRadioProfileAutoOffTimeRange OCTET STRING

HwRrmProfileEntry  
SEQUENCE    
  hwRrmProfileName OCTET STRING
  hwRrmAutoChannelSelectSwitch INTEGER
  hwRrmAutoTxPowerSelectSwitch INTEGER
  hwRrmErrRateThreshold Unsigned32
  hwRrmAirtimeFairSchduleSwitch INTEGER
  hwRrmDynamicEdcaSwitch INTEGER
  hwRrmUacLimitClientSnrSwitch INTEGER
  hwRrmUacClientSnrThreshold Unsigned32
  hwRrmUacPolicySwitch INTEGER
  hwRrmUacPolicyType INTEGER
  hwRrmUacClientNumAccessThreshold Unsigned32
  hwRrmUacClientNumRoamThreshold Unsigned32
  hwRrmUacReachThresholdHideSsidSwitch INTEGER
  hwRrmBandSteerDenyThreshold Unsigned32
  hwRrmBandSteerLbClientThreshold Unsigned32
  hwRrmBandSteerLbGapThreshold Unsigned32
  hwRrmBandSteerClientBandsExpire Unsigned32
  hwRrmLoadBalanceSwitch INTEGER
  hwRrmLoadBalanceClientThreshold Unsigned32
  hwRrmLoadBalanceGapThreshold Unsigned32
  hwRrmLoadBalanceDenyThreshold Unsigned32
  hwRrmSmartRoamCheckType INTEGER
  hwRrmSmartRoamSwitch INTEGER
  hwRrmSmartRoamSnrThreshold Unsigned32
  hwRrmSmartRoamRateThreshold Unsigned32
  hwRrmSmartRoamSnrHighLevelMargin Unsigned32
  hwRrmSmartRoamSnrLowLevelMargin Unsigned32
  hwRrmSmartRoamSnrCheckInterval Unsigned32
  hwRrmSmartRoamUnableRoamExpireTime Unsigned32
  hwRrmProfileRowStatus RowStatus
  hwRrmUacChannelUtiAccessThreshold Unsigned32
  hwRrmUacChannelUtiRoamThreshold Unsigned32
  hwRrmSmartRoamQuickKickoffRateThr Unsigned32
  hwRrmSmartRoamQuickKickoffSnrThr Unsigned32

HwAirScanProfileEntry  
SEQUENCE    
  hwAirScanProfileName OCTET STRING
  hwAirScanPeriod Unsigned32
  hwAirScanInterval Unsigned32
  hwAirScanChannelSet INTEGER
  hwAirScanProfilRowStatus RowStatus
  hwAirScanVoiceAware INTEGER
  hwAirScanVideoAware INTEGER
  hwAirScanSwitch INTEGER

HwVapProfileEntry  
SEQUENCE    
  hwVapProfileName OCTET STRING
  hwVapForwardMode INTEGER
  hwVapTunnelForwardProtocol Unsigned32
  hwVapServiceSwitch INTEGER
  hwVapAutoOffStartTime OCTET STRING
  hwVapAutoOffEndTime OCTET STRING
  hwVapTemporaryManagementSwitch INTEGER
  hwVapServiceVlan Unsigned32
  hwVapVlanPool OCTET STRING
  hwVapType INTEGER
  hwVapStaAccessMode INTEGER
  hwVapStaAccessModePorfile OCTET STRING
  hwVapRoamHomeAgent INTEGER
  hwVapRoamVlanMobilityGroup Unsigned32
  hwVapRoamLayer3Switch INTEGER
  hwVapBandSteerSwitch INTEGER
  hwVapLearnIpv4Address INTEGER
  hwVapLearnIpv6Address INTEGER
  hwVapLearnIpv4AddressStrict INTEGER
  hwVapIpBindCheck INTEGER
  hwVapArpBindCheck INTEGER
  hwVapOptinon82InsertSwitch INTEGER
  hwVapOptinon82InsertRidFormat INTEGER
  hwVapDhcpTrustPort INTEGER
  hwVapNdTrustPort INTEGER
  hwVapSecurityProfile OCTET STRING
  hwVapTrafficProfile OCTET STRING
  hwVapSsidProfile OCTET STRING
  hwVapAuthenticationProfile OCTET STRING
  hwVapSacProfile OCTET STRING
  hwVapProfileRowStatus RowStatus
  hwVapUserProfile OCTET STRING
  hwVapHotspot2Profile OCTET STRING
  hwSoftgreProfile OCTET STRING
  hwVapOptinon82RidUserDefined OCTET STRING
  hwVapOptinon82RidMacFormat INTEGER
  hwVapOptinon82InsertCidFormat INTEGER
  hwVapOptinon82CidUserDefined OCTET STRING
  hwVapOptinon82CidMacFormat INTEGER
  hwVapUccProfile OCTET STRING
  hwVapAntiAttackBroadcastFloodSwitch INTEGER
  hwVapAntiAttackBroadcastFloodStaRateThreshold Unsigned32
  hwVapAntiAttackBroadcastFloodBlacklistSwitch INTEGER
  hwVapLearnIpv6AddressStrict INTEGER
  hwVapAntiAttackARPFloodSwitch INTEGER
  hwVapAntiAttackARPFloodStaRateThreshold Unsigned32
  hwVapAntiAttackARPFloodBlacklistSwitch INTEGER
  hwVapAntiAttackNDFloodSwitch INTEGER
  hwVapAntiAttackNDFloodStaRateThreshold Unsigned32
  hwVapAntiAttackNDFloodBlacklistSwitch INTEGER
  hwVapAntiAttackIGMPFloodSwitch INTEGER
  hwVapAntiAttackIGMPFloodStaRateThreshold Unsigned32
  hwVapAntiAttackIGMPFloodBlacklistSwitch INTEGER
  hwVapDefenceProfile OCTET STRING
  hwVapTimeRange OCTET STRING
  hwVapPermitVlanList OCTET STRING

HwSsidProfileEntry  
SEQUENCE    
  hwSsidProfileName OCTET STRING
  hwSsidText OCTET STRING
  hwSsidHide INTEGER
  hwSsidAssocTimeout Unsigned32
  hwSsidMaxStaNum Unsigned32
  hwSsidLegacyStaSwitch INTEGER
  hwSsidDtimInterval Unsigned32
  hwSsidClientEdcaVoiceECWmax Unsigned32
  hwSsidClientEdcaVoiceECWmin Unsigned32
  hwSsidClientEdcaVoiceAIFSN Unsigned32
  hwSsidClientEdcaVoiceTXOPLimit Unsigned32
  hwSsidClientEdcaVideoECWmax Unsigned32
  hwSsidClientEdcaVideoECWmin Unsigned32
  hwSsidClientEdcaVideoAIFSN Unsigned32
  hwSsidClientEdcaVideoTXOPLimit Unsigned32
  hwSsidClientEdcaBeECWmax Unsigned32
  hwSsidClientEdcaBeECWmin Unsigned32
  hwSsidClientEdcaBeAIFSN Unsigned32
  hwSsidClientEdcaBeTXOPLimit Unsigned32
  hwSsidClientEdcaBkECWmax Unsigned32
  hwSsidClientEdcaBkECWmin Unsigned32
  hwSsidClientEdcaBkAIFSN Unsigned32
  hwSsidClientEdcaBkTXOPLimit Unsigned32
  hwSsidInboundCarCir Unsigned32
  hwSsidInboundCarPir Unsigned32
  hwSsidInboundCarCbs Unsigned32
  hwSsidInboundCarPbs Unsigned32
  hwSsidOutboundCarCir Unsigned32
  hwSsidOutboundCarPir Unsigned32
  hwSsidOutboundCarCbs Unsigned32
  hwSsidOutboundCarPbs Unsigned32
  hwSsidProfileRowStatus RowStatus
  hwSsidHideWhileReachMaxSta INTEGER
  hwSsidBeacon2gRate INTEGER
  hwSsidBeacon5gRate INTEGER
  hwSsidDenyBroadcastProbe INTEGER
  hwSsidProbeResponseRetry Unsigned32
  hwSsidUapsd INTEGER
  hwSsidActiveDullClient INTEGER
  hwSsidMuMIMOSwitch INTEGER
  hwSsidProfile80211rEnable INTEGER
  hwSsidProfile80211rMode INTEGER
  hwSsidProfile80211rReassociateTimeout Integer32

HwSecurityProfileEntry  
SEQUENCE    
  hwSecurityProfileName OCTET STRING
  hwSecurityPolicy INTEGER
  hwSecurityWepEncrypt Unsigned32
  hwSecurityWepPskMode Unsigned32
  hwSecurityWepPsk1 OCTET STRING
  hwSecurityWepPsk2 OCTET STRING
  hwSecurityWepPsk3 OCTET STRING
  hwSecurityWepPsk4 OCTET STRING
  hwSecurityWepDefaultKeyId Unsigned32
  hwSecurityWpaEncrypt INTEGER
  hwSecurityWpaPskMode INTEGER
  hwSecurityWpaPsk OCTET STRING
  hwSecurityWpaPtkUpdateSwitch INTEGER
  hwSecurityWpaPtkUpdateInterval Unsigned32
  hwSecurityWapiPskMode INTEGER
  hwSecurityWapiPsk OCTET STRING
  hwSecurityWapiAsuIpAddress IpAddress
  hwSecurityWapiIssuerCertFileName OCTET STRING
  hwSecurityWapiAsuCertFileName OCTET STRING
  hwSecurityWapiAcCertFileName OCTET STRING
  hwSecurityWapiAcPrvKeyFileName OCTET STRING
  hwSecurityWapiIssuerPfxPassword OCTET STRING
  hwSecurityWapiAsuPfxPassword OCTET STRING
  hwSecurityWapiAcPfxPassword OCTET STRING
  hwSecurityWapiAcPrvKeyPassword OCTET STRING
  hwSecurityWapiCertRetransCount Unsigned32
  hwSecurityWapiBkThreshold Unsigned32
  hwSecurityWapiBkLifetime Unsigned32
  hwSecurityWapiUskUpdateMethod INTEGER
  hwSecurityWapiMskUpdateMethod INTEGER
  hwSecurityWapiUskUpdateInterval Unsigned32
  hwSecurityWapiUskUpdatePackets Unsigned32
  hwSecurityWapiUskRetansCount Unsigned32
  hwSecurityWapiMskUpdateInterval Unsigned32
  hwSecurityWapiMskUpdatePackets Unsigned32
  hwSecurityWapiMskRetansCount Unsigned32
  hwSecurityWapiSATimeout Unsigned32
  hwSecurityPMF Unsigned32
  hwSecurityProfileRowStatus RowStatus

HwAPTrafficProfileEntry  
SEQUENCE    
  hwAPTrafficProfileName OCTET STRING
  hwAPTrafficProfilePriorityMapDnTrustMode INTEGER
  hwAPTrafficProfilePriorityDscpDnMap80211e OCTET STRING
  hwAPTrafficProfilePriority80211eUpMapDscp OCTET STRING
  hwAPTrafficProfileUserIsolate INTEGER
  hwAPTrafficProfileRateLimitClientUp Unsigned32
  hwAPTrafficProfileRateLimitClientDn Unsigned32
  hwAPTrafficProfileRateLimitVapUp Unsigned32
  hwAPTrafficProfileRateLimitVapDn Unsigned32
  hwAPTrafficProfileMldSnooping INTEGER
  hwAPTrafficProfileIGMPSnooping INTEGER
  hwAPTrafficProfileIGMPSnoopingReportSuppress INTEGER
  hwAPTrafficProfileMcToUc INTEGER
  hwAPTrafficProfileOptimizeSuppressionBc Unsigned32
  hwAPTrafficProfileOptimizeSuppressionUc Unsigned32
  hwAPTrafficProfileOptimizeSuppressionMc Unsigned32
  hwAPTrafficProfileOptimizeTCPAdjustMSS Unsigned32
  hwAPTrafficProfileOptimizeProxyARP INTEGER
  hwAPTrafficProfileOptimizeProxyND INTEGER
  hwAPTrafficProfileOptimizeUcSendARP INTEGER
  hwAPTrafficProfileOptimizeUcSendND INTEGER
  hwAPTrafficProfileOptimizeUcSendDHCP INTEGER
  hwAPTrafficProfileOptimizeBcMcDenyAll INTEGER
  hwAPTrafficProfileOptimizeStaBridgeForward INTEGER
  hwAPTrafficProfileRowStatus RowStatus
  hwAPTrafficProfilePriorityMapUpTrustMode INTEGER
  hwAPTrafficProfilePriorityDscpUpMapDscp OCTET STRING
  hwAPTrafficProfileOptimizeBcMcMismatchAct INTEGER
  hwAPTrafficProfileMcToUcDynamicAdatptive INTEGER
  hwAPTrafficProfileIGMPSnoopingMaxBandwidth Unsigned32
  hwAPTrafficProfileIGMPSnoopingMaxUser Unsigned32
  hwAPTrafficProfilePriorityDscpUpMap8021p OCTET STRING
  hwAPTrafficProfilePriority80211eUpMap8021p OCTET STRING
  hwAPTrafficProfilePriority8021pDnMap80211e OCTET STRING

HwAPTrafficProfileFilterEntry  
SEQUENCE    
  hwAPTrafficProfileFilterDirection INTEGER
  hwAPTrafficProfileFilterType INTEGER
  hwAPTrafficProfileFilterACLID Integer32
  hwAPTrafficProfileFilterRowStatus RowStatus

HwWlanVlanPoolEntry  
SEQUENCE    
  hwVlanPoolName OCTET STRING
  hwVlanPoolVlanlist OCTET STRING
  hwVlanPoolAssignMethod INTEGER
  hwVlanPoolRowStatus RowStatus

HwWlanStaWhitelistProfileEntry  
SEQUENCE    
  hwWlanStaWhitelistProfileName OCTET STRING
  hwWlanStaWhitelistProfileRowStatus RowStatus

HwWlanStaWhitelistProfileConfigEntry  
SEQUENCE    
  hwWlanStaWhitelistStaMac MacAddress
  hwWlanStaWhitelistRowStatus RowStatus
  hwWlanStaWhitelistStaMacDescription OCTET STRING

HwWlanStaBlacklistProfileEntry  
SEQUENCE    
  hwWlanStaBlacklistProfileName OCTET STRING
  hwWlanStaBlacklistProfileRowStatus RowStatus

HwWlanStaBlacklistProfileConfigEntry  
SEQUENCE    
  hwWlanStaBlacklistStaMac MacAddress
  hwWlanStaBlacklistRowStatus RowStatus
  hwWlanStaBlacklistStaMacDescription OCTET STRING

HwWidsProfileEntry  
SEQUENCE    
  hwWidsProfileName OCTET STRING
  hwWidsProfileRowStatus RowStatus
  hwWidsDeviceReportInterval Unsigned32
  hwWidsDeviceSyncInterval Unsigned32
  hwWidsSpoofProfile OCTET STRING
  hwWidsWhitelistProfile OCTET STRING
  hwWidsBruteForceDetectInterval Unsigned32
  hwWidsBruteForceDetectThreshold Unsigned32
  hwWidsBruteForceQuietTime Unsigned32
  hwWidsFloodDetectInterval Unsigned32
  hwWidsFloodDetectThreshold Unsigned32
  hwWidsFloodQuietTime Unsigned32
  hwWidsWeakIvQuietTime Unsigned32
  hwWidsSpoofQuietTime Unsigned32
  hwWidsDynamicBlackListSwitch INTEGER
  hwWidsRogueContainModeBmp Unsigned32
  hwWidsStaWhitelistProfile OCTET STRING

HwWidsSpoofProfileEntry  
SEQUENCE    
  hwWidsSpoofProfileName OCTET STRING
  hwWidsSpoofSsidRegex OCTET STRING
  hwWidsSpoofProfileRowStatus RowStatus

HwWidsWhitelistProfileMacEntry  
SEQUENCE    
  hwWidsWhitelistProfileName OCTET STRING
  hwWidsWhitelistProfileMac MacAddress
  hwWidsWhitelistProfileMacRowStatus RowStatus

HwWidsWhitelistProfileOuiEntry  
SEQUENCE    
  hwWidsWhitelistProfileOui OCTET STRING
  hwWidsWhitelistProfileOuiRowStatus RowStatus

HwWidsWhitelistProfileSsidEntry  
SEQUENCE    
  hwWidsWhitelistProfileSsid OCTET STRING
  hwWidsWhitelistProfileSsidRowStatus RowStatus

HwWlanMeshProfileEntry  
SEQUENCE    
  hwWlanMeshProfileName OCTET STRING
  hwWlanMeshID OCTET STRING
  hwWlanMeshDhcpTrustPort INTEGER
  hwWlanMeshLinkReportInterval Unsigned32
  hwWlanMeshMaxLinkNum Unsigned32
  hwWlanMeshRssiThreshold Integer32
  hwWlanMeshSecurityProfileName OCTET STRING
  hwWlanMeshProfileHandoverProfileName OCTET STRING
  hwWlanMeshFwaSwitch INTEGER
  hwWlanMeshFwaEdcaMode INTEGER
  hwWlanMeshProfileRowStatus RowStatus
  hwWlanMeshClientEdcaVoiceECWmax Unsigned32
  hwWlanMeshClientEdcaVoiceECWmin Unsigned32
  hwWlanMeshClientEdcaVoiceAIFSN Unsigned32
  hwWlanMeshClientEdcaVoiceTXOPLimit Unsigned32
  hwWlanMeshClientEdcaVideoECWmax Unsigned32
  hwWlanMeshClientEdcaVideoECWmin Unsigned32
  hwWlanMeshClientEdcaVideoAIFSN Unsigned32
  hwWlanMeshClientEdcaVideoTXOPLimit Unsigned32
  hwWlanMeshClientEdcaBeECWmax Unsigned32
  hwWlanMeshClientEdcaBeECWmin Unsigned32
  hwWlanMeshClientEdcaBeAIFSN Unsigned32
  hwWlanMeshClientEdcaBeTXOPLimit Unsigned32
  hwWlanMeshClientEdcaBkECWmax Unsigned32
  hwWlanMeshClientEdcaBkECWmin Unsigned32
  hwWlanMeshClientEdcaBkAIFSN Unsigned32
  hwWlanMeshClientEdcaBkTXOPLimit Unsigned32
  hwWlanMeshNdTrustPort INTEGER
  hwWlanMeshLinkAgingTime Unsigned32
  hwWlanMeshProfilePriorityMapTrustMode INTEGER
  hwWlanMeshProfilePriorityDscpMap80211e OCTET STRING
  hwWlanMeshProfileClientModeSwitch INTEGER
  hwWlanMeshProfileBeacon2gRate INTEGER
  hwWlanMeshProfileBeacon5gRate INTEGER

HwWlanMeshWhitelistProfileEntry  
SEQUENCE    
  hwWlanMeshWhitelistProfileName OCTET STRING
  hwWlanMeshWhitelistProfileRowStatus RowStatus

HwWlanMeshWhitelistProfileConfigEntry  
SEQUENCE    
  hwWlanMeshWhitelistPeerApMac MacAddress
  hwWlanMeshWhitelistRowStatus RowStatus

HwWlanMeshHandoverProfileEntry  
SEQUENCE    
  hwWlanMeshHandoverProfileName OCTET STRING
  hwWlanMeshHOLinkProbeInterval Unsigned32
  hwWlanMeshHOMinRssiThreshold Integer32
  hwWlanMeshHOMaxRssiThreshold Integer32
  hwWlanMeshHOLinkHoldPeriod Unsigned32
  hwWlanMeshHORssiMargin Unsigned32
  hwWlanMeshHOLocationBasedAlgorithmEnable INTEGER
  hwWlanMeshHOMovingDirection INTEGER
  hwWlanMeshHOPNCriteriaObserveTime Unsigned32
  hwWlanMeshHOPNCriteriaQualifyTime Unsigned32
  hwWlanMeshUrgentHandoverLowRateThreshold Unsigned32
  hwWlanMeshUrgentHandoverLowRatePeriod Unsigned32
  hwWlanMeshUrgentHandoverPunishmentPeriod Unsigned32
  hwWlanMeshUrgentHandoverPunishmentRssi Unsigned32
  hwWlanMeshHandoverProfileRowStatus RowStatus

HwWdsProfileEntry  
SEQUENCE    
  hwWdsProfileName OCTET STRING
  hwWdsName OCTET STRING
  hwWdsMode INTEGER
  hwWdsDhcpTrustPort INTEGER
  hwWdsVlanTagged OCTET STRING
  hwWdsSecurityProfileName OCTET STRING
  hwWdsProfileRowStatus RowStatus
  hwWdsNdTrustPort INTEGER
  hwWdsProfilePriorityMapTrustMode INTEGER
  hwWdsProfilePriorityDscpMap80211e OCTET STRING
  hwWdsMuMIMOSwitch INTEGER
  hwWdsProfileBeacon2gRate INTEGER
  hwWdsProfileBeacon5gRate INTEGER

HwWdsWhitelistProfileEntry  
SEQUENCE    
  hwWdsWhitelistProfileName OCTET STRING
  hwWdsWhitelistProfileRowStatus RowStatus

HwWdsWhitelistEntry  
SEQUENCE    
  hwWdsWhitelistPeerApMac MacAddress
  hwWdsWhitelistRowStatus RowStatus

HwLocationProfileEntry  
SEQUENCE    
  hwLocationProfileName OCTET STRING
  hwLocationAeroscoutTagSwitch INTEGER
  hwLocationAeroscoutMuSwitch INTEGER
  hwLocationAeroscoutServerPort Unsigned32
  hwLocationAeroscoutViaACSwitch INTEGER
  hwLocationAeroscoutViaACPort Unsigned32
  hwLocationAeroscoutCompoundTime Unsigned32
  hwLocationEkahauTagEnable INTEGER
  hwLocationEkahauServerIPAddress IpAddress
  hwLocationEkahauServerIPv6Address OCTET STRING
  hwLocationEkahauServerPort Unsigned32
  hwLocationEkahauViaACEnable INTEGER
  hwLocationEkahauViaACPort Unsigned32
  hwLocationSourceIPAddress IpAddress
  hwLocationSourceIPv6Address OCTET STRING
  hwLocationPrivateMuEnable INTEGER
  hwLocationPrivateServerIPAddress IpAddress
  hwLocationPrivateServerIPv6Address OCTET STRING
  hwLocationPrivateServerPort Unsigned32
  hwLocationPrivateViaACEnable INTEGER
  hwLocationPrivateViaACPort Unsigned32
  hwLocationPrivateReportFrequency Unsigned32
  hwLocationProfileRowStatus RowStatus

HwHotspot2ProfileEntry  
SEQUENCE    
  hwHotspot2ProfileName OCTET STRING
  hwHotspot2NetworkType Unsigned32
  hwHotspot2InternetAccess INTEGER
  hwHotspot2VenueGroupCode Unsigned32
  hwHotspot2VenueTypeCode Unsigned32
  hwHotspot2Hessid MacAddress
  hwHotspot2IPv4AddressAvail Unsigned32
  hwHotspot2IPv6AddressAvail Unsigned32
  hwHotspot2NetworkAuthenType Unsigned32
  hwHotspot2RedirectUrl OCTET STRING
  hwHotspot2CarryP2PCrossConnectInfo INTEGER
  hwHotspot2CellularNetworkProfile OCTET STRING
  hwHotspot2ConnectionCapabilityProfile OCTET STRING
  hwHotspot2OperatorNameProfile OCTET STRING
  hwHotspot2OperatingClassProfile OCTET STRING
  hwHotspot2OperatorDomainProfile OCTET STRING
  hwHotspot2NaiRealmProfile OCTET STRING
  hwHotspot2VenueNameProfile OCTET STRING
  hwHotspot2RoamingConsortiumProfile OCTET STRING
  hwHotspot2ProfileRowStatus RowStatus

HwCellularNetworkProfileEntry  
SEQUENCE    
  hwCellularNetworkProfileName OCTET STRING
  hwCellularNetworkProfilePlmnIDList OCTET STRING
  hwCellularNetworkProfileRowStatus RowStatus

HwConnectionCapabilityProfileEntry  
SEQUENCE    
  hwConnectionCapabilityProfileName OCTET STRING
  hwConnectionCapabilityEsp INTEGER
  hwConnectionCapabilityIcmp INTEGER
  hwConnectionCapabilityTcpFtp INTEGER
  hwConnectionCapabilityTcpHttp INTEGER
  hwConnectionCapabilityTcpPptpVpn INTEGER
  hwConnectionCapabilityTcpSsh INTEGER
  hwConnectionCapabilityTcpTlsVpn INTEGER
  hwConnectionCapabilityTcpVoip INTEGER
  hwConnectionCapabilityUdpIke2Port4500 INTEGER
  hwConnectionCapabilityUdpIke2Port500 INTEGER
  hwConnectionCapabilityUdpVoip INTEGER
  hwConnectionCapabilityProfileRowStatus RowStatus

HwOperatorNameProfileEntry  
SEQUENCE    
  hwOperatorNameProfileName OCTET STRING
  hwOperatorNameLanguageCodeList OCTET STRING
  hwOperatorFriendlyNameList OCTET STRING
  hwOperatorNameProfileRowStatus RowStatus

HwOperatorClassProfileEntry  
SEQUENCE    
  hwOperatorClassProfileName OCTET STRING
  hwOperatorClassIndicationList OCTET STRING
  hwOperatorClassProfileRowStatus RowStatus

HwOperatorDomainNameProfileEntry  
SEQUENCE    
  hwOperatorDomainNameProfileName OCTET STRING
  hwOperatorDomainNameList OCTET STRING
  hwOperatorDomainNameProfileRowStatus RowStatus

HwNAIRealmProfileEntry  
SEQUENCE    
  hwNAIRealmProfileName OCTET STRING
  hwNAIRealmName OCTET STRING
  hwNAIRealmEapMethodType Unsigned32
  hwNAIRealmEapAuthenID Unsigned32
  hwNAIRealmEapAuthenPara Unsigned32
  hwNAIRealmProfileRowStatus RowStatus

HwVenueNameProfileEntry  
SEQUENCE    
  hwVenueNameProfileName OCTET STRING
  hwVenueNameLanguageCodeList OCTET STRING
  hwVenueNameList OCTET STRING
  hwVenueNameProfileRowStatus RowStatus

HwRoamingConsortiumProfileEntry  
SEQUENCE    
  hwRoamingConsortiumProfileName OCTET STRING
  hwRoamingConsortiumOIList OCTET STRING
  hwRoamingConsortiumOIInBeaconList OCTET STRING
  hwRoamingConsortiumProfileRowStatus RowStatus

HwSACProfileEntry  
SEQUENCE    
  hwSACProfileName OCTET STRING
  hwSACProfUserStat INTEGER
  hwSACProfVapStat INTEGER
  hwSACProfRowStatus RowStatus

HwSACProfileActionEntry  
SEQUENCE    
  hwSACProfileActionIndex Unsigned32
  hwSACProfileActProtocolType INTEGER
  hwSACProfileActProtocolName OCTET STRING
  hwSACProfileActProtocolGrpName OCTET STRING
  hwSACProfileActionType INTEGER
  hwSACProfileActCarCir Unsigned32
  hwSACProfileActRemarkDscpValue Unsigned32
  hwSACProfileActRemark8021pValue Unsigned32
  hwSACProfileActionRowstatus RowStatus

HwWlanMobilityAcEntry  
SEQUENCE    
  hwWlanMemAcIndex Integer32
  hwWlanAcIPv4Address IpAddress
  hwWlanAcIPv6Address OCTET STRING
  hwWlanAcState INTEGER
  hwWlanAcRowStatus RowStatus

HwWlanMobilityGroupEntry  
SEQUENCE    
  hwWlanMobilityGroupName OCTET STRING
  hwWlanMobilityGroupRowStatus RowStatus

HwWlanMobilityGroupMemberEntry  
SEQUENCE    
  hwWlanMobilityGroupMemberACIndex Integer32
  hwWlanMobilityGroupMemberRowStatus RowStatus

HwWlanMobilityMemberIPv4Entry  
SEQUENCE    
  hwWlanMobilityMemberIPv4Addr IpAddress
  hwWlanMobilityMemberIPv4Description OCTET STRING
  hwWlanMobilityMemberIPv4State INTEGER
  hwWlanMobilityMemberIPv4RowStatus RowStatus

HwWlanMobilityMemberIPv6Entry  
SEQUENCE    
  hwWlanMobilityMemberIPv6Addr OCTET STRING
  hwWlanMobilityMemberIPv6Description OCTET STRING
  hwWlanMobilityMemberIPv6State INTEGER
  hwWlanMobilityMemberIPv6RowStatus RowStatus

HwWlanMobilityClientIPv4Entry  
SEQUENCE    
  hwWlanMobilityClientIPv4Addr IpAddress
  hwWlanMobilityClientIPv4State INTEGER

HwWlanMobilityClientIPv6Entry  
SEQUENCE    
  hwWlanMobilityClientIPv6Addr OCTET STRING
  hwWlanMobilityClientIPv6State INTEGER

HwWlanLanguageCodeEntry  
SEQUENCE    
  hwWlanLanguageCode OCTET STRING
  hwWlanLanguageCodeDescription OCTET STRING

HwFatApRadioEntry  
SEQUENCE    
  hwFatApRadio Unsigned32
  hwFatApRadio0Frequency INTEGER
  hwFatApRadio2gProfile OCTET STRING
  hwFatApRadio5gProfile OCTET STRING
  hwFatApRadioMeshProfile OCTET STRING
  hwFatApLocationProfile OCTET STRING
  hwFatApRadioRowStatus RowStatus
  hwFatApMeshWhitelistProfile OCTET STRING
  hwFatApWdsWhitelistProfile OCTET STRING
  hwFatApRadioSwitch INTEGER
  hwFatApRadioChannel Unsigned32
  hwFatApRadioBandwidth INTEGER
  hwFatApRadioEirp Unsigned32
  hwFatApRadioAntennaGain Unsigned32
  hwFatApRadioCoverageDistance Unsigned32
  hwFatApRadioWorkMode INTEGER
  hwFatApWidsDeviceDetectSwitch INTEGER
  hwFatApWidsAttackDetectEnBmp Unsigned32
  hwFatApWidsRogueContainSwitch INTEGER
  hwFatApRadioSecondChannel Unsigned32

HwFatApVapEntry  
SEQUENCE    
  hwFatApWlanId Unsigned32
  hwFatApRadioId Unsigned32
  hwFatApVapProfile OCTET STRING
  hwFatApVapProfileRowStatus RowStatus

HwNAIRealmProfileListEntry  
SEQUENCE    
  hwNAIRealmProfileListProfileName OCTET STRING
  hwNAIRealmProfileListRowStatus RowStatus

HwWidsSpoofProfileListEntry  
SEQUENCE    
  hwWidsSpoofProfileListProfileName OCTET STRING
  hwWidsSpoofProfileListRowStatus RowStatus

HwWidsWhitelistProfileListEntry  
SEQUENCE    
  hwWidsWhitelistProfileListProfileName OCTET STRING
  hwWidsWhitelistProfileListRowStatus RowStatus

HwWlanLoadBalanceStaticGroupEntry  
SEQUENCE    
  hwWlanLBGroupName OCTET STRING
  hwWlanLBGapThreshold Unsigned32
  hwWlanLBDenyThreshold Unsigned32
  hwWlanLBStartThreshold Unsigned32
  hwWlanLBGroupStatus Unsigned32
  hwWlanLBGroupRowStatus RowStatus

HwWlanLoadBalanceStaticGroupMemberEntry  
SEQUENCE    
  hwWlanLBMemberRowStatus RowStatus

HwWlanCountryCodeEntry  
SEQUENCE    
  hwWlanCountryCode OCTET STRING
  hwWlanCountryCodeEngDescription OCTET STRING
  hwWlanCountryCodeAvailableChannelSet2gBW20 OCTET STRING
  hwWlanCountryCodeAvailableChannelSet2gBW40Plus OCTET STRING
  hwWlanCountryCodeAvailableChannelSet2gBW40Minus OCTET STRING
  hwWlanCountryCodeAvailableChannelSet5gBW20 OCTET STRING
  hwWlanCountryCodeAvailableChannelSet5gBW40Plus OCTET STRING
  hwWlanCountryCodeAvailableChannelSet5gBW40Minus OCTET STRING
  hwWlanCountryCodeAvailableChannelSet5gBW80 OCTET STRING
  hwWlanCountryCodeAvailableChannelSet5gBW160 OCTET STRING

HwUCCProfileEntry  
SEQUENCE    
  hwUCCProfileName OCTET STRING
  hwUCCProfLyncVoice8021p INTEGER
  hwUCCProfLyncVoice8021pValue Unsigned32
  hwUCCProfLyncVoiceDscp INTEGER
  hwUCCProfLyncVoiceDscpValue Unsigned32
  hwUCCProfLyncVideo8021p INTEGER
  hwUCCProfLyncVideo8021pValue Unsigned32
  hwUCCProfLyncVideoDscp INTEGER
  hwUCCProfLyncVideoDscpValue Unsigned32
  hwUCCProfLyncShare8021p INTEGER
  hwUCCProfLyncShare8021pValue Unsigned32
  hwUCCProfLyncShareDscp INTEGER
  hwUCCProfLyncShareDscpValue Unsigned32
  hwUCCProfLyncFileTransfer8021p INTEGER
  hwUCCProfLyncFileTransfer8021pValue Unsigned32
  hwUCCProfLyncFileTransferDscp INTEGER
  hwUCCProfLyncFileTransferDscpValue Unsigned32
  hwUCCProfileRowStatus RowStatus

HwSoftgreProfileEntry  
SEQUENCE    
  hwSoftgreProfileName OCTET STRING
  hwSoftgreDestinationIPAddress IpAddress
  hwSoftgreDestinationIPv6Address OCTET STRING
  hwSoftgreKeepaliveFlag INTEGER
  hwSoftgreKeepalivePeriod Unsigned32
  hwSoftgreKeepaliveRetryTimes Unsigned32
  hwSoftgreProfileRowStatus RowStatus

HwWlanIDIndexedAPSpecificEntry  
SEQUENCE    
  hwWlanIDIndexedAPSpApId Unsigned32
  hwWlanIDIndexedAPSpAPSystemProfile OCTET STRING
  hwWlanIDIndexedAPSpDomainProfile OCTET STRING
  hwWlanIDIndexedAPSpApMac MacAddress
  hwWlanIDIndexedAPSpApTypeInfo OCTET STRING
  hwWlanIDIndexedAPSpWidsProfile OCTET STRING
  hwWlanIDIndexedAPSpRowStatus RowStatus
  hwWlanIDIndexedAPSpBleProfile OCTET STRING
  hwWlanIDIndexedAPSpLongitude OCTET STRING
  hwWlanIDIndexedAPSpLatitude OCTET STRING
  hwWlanIDIndexedSpApAddressMode INTEGER
  hwWlanIDIndexedSpApIPv4Address IpAddress
  hwWlanIDIndexedSpApIPv4Mask IpAddress
  hwWlanIDIndexedSpApIPv4Gateway IpAddress
  hwWlanIDIndexedSpApIPv6Address OCTET STRING
  hwWlanIDIndexedSpApIPv6PrefixLen Unsigned32
  hwWlanIDIndexedSpApIPv6Gateway OCTET STRING
  hwWlanIDIndexedSpIPv4ACList OCTET STRING
  hwWlanIDIndexedSpIPv6ACList OCTET STRING
  hwWlanIDIndexedSpGroupName OCTET STRING
  hwWlanIDIndexedSpApName OCTET STRING

HwIDIndexedAPSpecificWiredPortEntry  
SEQUENCE    
  hwIDIndexedAPSpWPInterfaceType INTEGER
  hwIDIndexedAPSpWPInterfaceNum Unsigned32
  hwIDIndexedAPSpWPProfile OCTET STRING
  hwIDIndexedAPSpWPRowStatus RowStatus

HwIDIndexedAPSpecificRadioEntry  
SEQUENCE    
  hwIDIndexedAPSpRadio Unsigned32
  hwIDIndexedAPSp5gRadioProfile OCTET STRING
  hwIDIndexedAPSpMeshProfile OCTET STRING
  hwIDIndexedAPSpWdsProfile OCTET STRING
  hwIDIndexedAPSpLocationProfile OCTET STRING
  hwIDIndexedAPSpRadio2gProfile OCTET STRING
  hwIDIndexedAPSpMeshWhitelistProfile OCTET STRING
  hwIDIndexedAPSpWdsWhitelistProfile OCTET STRING
  hwIDIndexedAPSpRadioSwitch INTEGER
  hwIDIndexedAPSpRadioChannel Unsigned32
  hwIDIndexedAPSpRadioBandwidth INTEGER
  hwIDIndexedAPSpRadioEirp Unsigned32
  hwIDIndexedAPSpRadioAntennaGain Unsigned32
  hwIDIndexedAPSpRadioCoverageDistance Unsigned32
  hwIDIndexedAPSpRadioWorkMode INTEGER
  hwIDIndexedAPSpRadioFrequency INTEGER
  hwIDIndexedAPSpSpectrumAnalysisSwitch INTEGER
  hwIDIndexedAPSpWidsDeviceDetectSwitch INTEGER
  hwIDIndexedAPSpWidsAttackDetectEnBmp Unsigned32
  hwIDIndexedAPSpWidsRogueContainSwitch INTEGER
  hwIDIndexedAPSpRadioRowStatus RowStatus
  hwIDIndexedAPSpRadioSecondChannel Unsigned32

HwIDIndexedAPSpecificVapEntry  
SEQUENCE    
  hwIDIndexedAPSpWlan Unsigned32
  hwIDIndexedAPSpVapProfile OCTET STRING
  hwIDIndexedAPSpVapRowStatus RowStatus

HwBleProfileEntry  
SEQUENCE    
  hwWlanBLEProfileName OCTET STRING
  hwWlanBLEBroadcasterEnable INTEGER
  hwWlanBLETxPower Integer32
  hwWlanBLEBroadcastingUUID OCTET STRING
  hwWlanBLEBroadcastingMajor OCTET STRING
  hwWlanBLEBroadcastingMinor OCTET STRING
  hwWlanBLEBroadcastingReferenceRSSI Integer32
  hwWlanBLEBroadcastingInterval Unsigned32
  hwWlanBLESnifferEnable INTEGER
  hwWlanBLEProfileRowStatus RowStatus
  hwWlanBLEBroadcastingUUIDHex OCTET STRING
  hwWlanBLEBroadcastingMajorHex OCTET STRING
  hwWlanBLEBroadcastingMajorDecimal Integer32
  hwWlanBLEBroadcastingMinorHex OCTET STRING
  hwWlanBLEBroadcastingMinorDecimal Integer32

HwAPGroupCardEntry  
SEQUENCE    
  hwAPGrpCardIndex Unsigned32
  hwAPGrpCardSerialProfile OCTET STRING
  hwAPGrpCardProfile OCTET STRING
  hwAPGrpCardNetUDPPort Unsigned32
  hwAPGrpIoTRowStatus RowStatus
  hwAPGrpCardNetTCPPort Unsigned32

HwAPSpecificCardEntry  
SEQUENCE    
  hwAPSpIoTIndex Unsigned32
  hwAPSpIoTSerialProfile OCTET STRING
  hwAPSpIoTProfile OCTET STRING
  hwAPSpIoTNetUDPPort Unsigned32
  hwAPSpIoTRowStatus RowStatus
  hwAPSpIoTNetTCPPort Unsigned32

HwIoTSerialProfileEntry  
SEQUENCE    
  hwIoTSerialProfileName OCTET STRING
  hwIoTSerialSpeed Unsigned32
  hwIoTSerialParity INTEGER
  hwIoTSerialStopbits INTEGER
  hwIoTSerialFrameFormat INTEGER
  hwIoTSerialFrameLength Unsigned32
  hwIoTSerialFrameStart Unsigned32
  hwIoTSerialFrameStop Unsigned32
  hwIoTSerialProfileRowStatus RowStatus

HwIoTProfileEntry  
SEQUENCE    
  hwIoTProfileName OCTET STRING
  hwIoTProfileConfigAgentPermitIp IpAddress
  hwIoTProfileConfigAgentPermitMaskLen Unsigned32
  hwIoTProfileShareKey OCTET STRING
  hwIoTProfileRowStatus RowStatus

HwIoTProfileManagementServerEntry  
SEQUENCE    
  hwIoTProfileManagementServerIndex Unsigned32
  hwIoTProfileManagementServerIp IpAddress
  hwIoTProfileManagementServerPort Unsigned32
  hwIoTProfileManagementServerRowStatus RowStatus

HwVapAntiAttackUserDefFloodEntry  
SEQUENCE    
  hwVapAntiAttackDefFloodIndex Unsigned32
  hwVapAntiAttackDefFloodProtocolType INTEGER
  hwVapAntiAttackDefFloodProtocolValue Unsigned32
  hwVapAntiAttackDefFloodStaRateThreshold Unsigned32
  hwVapAntiAttackDefFloodBlacklistSwitch INTEGER
  hwVapAntiAttackDefFloodRowStatus RowStatus

HwApProfIGMPSnoopingGroupEntry  
SEQUENCE    
  hwAPProfIGMPSnoopingGroupIndex Unsigned32
  hwAPProfIGMPSnoopingGroupStartGroupAddr IpAddress
  hwAPProfIGMPSnoopingGroupEndGroupAddr IpAddress
  hwAPProfIGMPSnoopingGroupBandwidth Unsigned32
  hwAPProfIGMPSnoopingGroupRowStatus RowStatus

HwAPWiredPortProfileTrafficRemarkEntry  
SEQUENCE    
  hwAPWiredPortProfileTrafficRemarkDirection INTEGER
  hwAPWiredPortProfileTrafficRemarkIPType INTEGER
  hwAPWiredPortProfileTrafficRemarkACLID Unsigned32
  hwAPWiredPortProfileTrafficRemarkType INTEGER
  hwAPWiredPortProfileTrafficRemarkValue Unsigned32
  hwAPWiredPortProfileTrafficRemarkRowStatus RowStatus

HwAPTrafficProfileRemarkEntry  
SEQUENCE    
  hwAPTrafficProfileRemarkDirection INTEGER
  hwAPTrafficProfileRemarkIPType INTEGER
  hwAPTrafficProfileRemarkACLID Integer32
  hwAPTrafficProfileRemarkType INTEGER
  hwAPTrafficProfileRemarkValue Integer32
  hwAPTrafficProfileRemarkRowStatus RowStatus

HwWlanClusterLocalIPv4Entry  
SEQUENCE    
  hwWlanClusterLocalIPv4Address IpAddress
  hwWlanClusterLocalIPv4Psk OCTET STRING
  hwWlanClusterLocalIPv4RowStatus RowStatus

HwWlanClusterLocalIPv6Entry  
SEQUENCE    
  hwWlanClusterLocalIPv6Address OCTET STRING
  hwWlanClusterLocalIPv6Psk OCTET STRING
  hwWlanClusterLocalIPv6RowStatus RowStatus

HwWlanClusterACListInfoEntry  
SEQUENCE    
  hwWlanClusterACIndex Unsigned32
  hwWlanClusterACIPv4 IpAddress
  hwWlanClusterACIPv6 OCTET STRING
  hwWlanClusterACRole INTEGER
  hwWlanClusterACType OCTET STRING
  hwWlanClusterACVersion OCTET STRING
  hwWlanClusterACStatus INTEGER
  hwWlanClusterACLastSynTime OCTET STRING

Defined Values

hwWlanConfig 1.3.6.1.4.1.2011.6.139.11
V1.77, Add nodes of hwAPPortLinkProfileEEESwitch and Broadcast suppression.
MODULE-IDENTITY    

hwWlanConfigObjects 1.3.6.1.4.1.2011.6.139.11.1
OBJECT IDENTIFIER    

hwWlanGlobalConfig 1.3.6.1.4.1.2011.6.139.11.1.1
OBJECT IDENTIFIER    

hwWlanGlobalApUsername 1.3.6.1.4.1.2011.6.139.11.1.1.1
This object indicates user names for Telnet-based login to APs.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4..31)  

hwWlanGlobalApPassword 1.3.6.1.4.1.2011.6.139.11.1.1.2
This object indicates passwords for Telnet-based login to APs.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8..32)  

hwWlanUsernamePasswordApMac 1.3.6.1.4.1.2011.6.139.11.1.1.3
This object indicates query and setting of MAC addresses of clients logging in to APs.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwWlanGlobalApLldpSwitch 1.3.6.1.4.1.2011.6.139.11.1.1.4
This object indicates the status of the global LLDP function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanGlobalIpv6Enable 1.3.6.1.4.1.2011.6.139.11.1.1.5
This object indicates the status of the global IPv6 function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanStationIpv6Enable 1.3.6.1.4.1.2011.6.139.11.1.1.6
This object indicates the status of the IPv6 function of users. The default value is 1 . 1: disable 2: enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanApDataCollectionInterval 1.3.6.1.4.1.2011.6.139.11.1.1.7
This object indicates the period of caching AP performance. The default value is 15. It is expressed in minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..60 | 255  

hwTestRtCollectOnoff 1.3.6.1.4.1.2011.6.139.11.1.1.8
This object indicates the status of the real-time collection switch.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwTestApNormalCollectCycle 1.3.6.1.4.1.2011.6.139.11.1.1.9
This object indicates the regular period of an AC collecting AP performance data.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwTestApRtCollectCycle 1.3.6.1.4.1.2011.6.139.11.1.1.10
This object indicates the real-time period of an AC collecting AP performance data.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanConfigCommitAll 1.3.6.1.4.1.2011.6.139.11.1.1.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanProtect 1.3.6.1.4.1.2011.6.139.11.1.1.12
OBJECT IDENTIFIER    

hwWlanProtectIpAddress 1.3.6.1.4.1.2011.6.139.11.1.1.12.1
This object indicates the IP address of the standby AC.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanProtectIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.1.12.2
This object indicates setting of the IPv6 address of the standby AC.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanProtectPriority 1.3.6.1.4.1.2011.6.139.11.1.1.12.3
This object indicates the AC priority that determines whether the AC can be selected as the active AC. The default value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

hwWlanProtectSwitch 1.3.6.1.4.1.2011.6.139.11.1.1.12.4
This object indicates the status of the hot backup function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwWlanProtectRestoreSwitch 1.3.6.1.4.1.2011.6.139.11.1.1.12.5
This object indicates the status of the switchback function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwUndoWlanProtectIpAddress 1.3.6.1.4.1.2011.6.139.11.1.1.12.6
This object indicates whether to restore the default setting of the IP address of the standby AC.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwUndoWlanProtectPriority 1.3.6.1.4.1.2011.6.139.11.1.1.12.7
This object indicates whether to restore the default setting of the priority of the standby AC.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanBackupHsbConfig 1.3.6.1.4.1.2011.6.139.11.1.1.13
OBJECT IDENTIFIER    

hwWlanCfgHsbServiceType 1.3.6.1.4.1.2011.6.139.11.1.1.13.1
This object indicates the HSB type. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), hsbGroup(2), hsbService(3)  

hwWlanCfgHsbGroupId 1.3.6.1.4.1.2011.6.139.11.1.1.13.2
This object indicates the HSB group ID. If the HSB type is set to Disable, the ID is 0xFFFFFFFF.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwWlanCfgHsbTunnelId 1.3.6.1.4.1.2011.6.139.11.1.1.13.3
This object indicates the ID of the HSB channel. If the HSB type is set to Disable, the ID is 0xFFFFFFFF.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwWlanCommitTable 1.3.6.1.4.1.2011.6.139.11.1.1.14
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanCommitEntry

hwWlanCommitEntry 1.3.6.1.4.1.2011.6.139.11.1.1.14.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanCommitEntry  

hwWlanCommitApMac 1.3.6.1.4.1.2011.6.139.11.1.1.14.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWlanConfigCommit 1.3.6.1.4.1.2011.6.139.11.1.1.14.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanReportStaInfo 1.3.6.1.4.1.2011.6.139.11.1.1.15
This object indicates the switch of recording user information in the log. 1:disable 2:enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanBLELowPowerWarningThreshold 1.3.6.1.4.1.2011.6.139.11.1.1.16
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanBLEMonitorListTable 1.3.6.1.4.1.2011.6.139.11.1.1.17
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanBLEMonitorListEntry

hwWlanBLEMonitorListEntry 1.3.6.1.4.1.2011.6.139.11.1.1.17.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanBLEMonitorListEntry  

hwWlanBLEMonitoringListMac 1.3.6.1.4.1.2011.6.139.11.1.1.17.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWlanBLEMonitoringListRowStatue 1.3.6.1.4.1.2011.6.139.11.1.1.17.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanApPwdPolicyConfig 1.3.6.1.4.1.2011.6.139.11.1.1.18
OBJECT IDENTIFIER    

hwApPwdPolicyEnable 1.3.6.1.4.1.2011.6.139.11.1.1.18.1
Ap password policy,the default is disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApPwdPolicyExpire 1.3.6.1.4.1.2011.6.139.11.1.1.18.2
Set the days of password expire,the default is 90
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..999  

hwApPwdPolicyHistoryRecordNum 1.3.6.1.4.1.2011.6.139.11.1.1.18.3
The number of password history record,the default is 5
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..12  

hwApPwdPolicyAlertBefore 1.3.6.1.4.1.2011.6.139.11.1.1.18.4
The days of password before-expire,the default is 30
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..999  

hwApPwdPolicyAlertOriginal 1.3.6.1.4.1.2011.6.139.11.1.1.18.5
Set password original-alert,the default is enable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApPwdSetTime 1.3.6.1.4.1.2011.6.139.11.1.1.18.6
Get the password set time
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwApPwdIsExpired 1.3.6.1.4.1.2011.6.139.11.1.1.18.7
Query password is expired or not
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notexpired(1), expired(2)  

hwApPwdIsOrginal 1.3.6.1.4.1.2011.6.139.11.1.1.18.8
Query password is original or not
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notoriginal(1), original(2)  

hwWlanReportStaAssocInfo 1.3.6.1.4.1.2011.6.139.11.1.1.19
This object indicates the switch of recording user online and offline information in the log. 1:disable 2:enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanGlobalLocationSourceIPAddress 1.3.6.1.4.1.2011.6.139.11.1.1.20
This object indicates the global source IPv4 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanGlobalLocationSourceIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.1.21
This object indicates the global source IPv6 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwApAuthObjects 1.3.6.1.4.1.2011.6.139.11.1.2
OBJECT IDENTIFIER    

hwWlanApAuthMode 1.3.6.1.4.1.2011.6.139.11.1.2.1
This object indicates the AP authentication mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER macAuth(1), snAuth(2), noAuth(3)  

hwWlanApMacWhitelistTable 1.3.6.1.4.1.2011.6.139.11.1.2.2
This table is used to add and delete AP MAC addresses in the white lists.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApMacWhitelistEntry

hwWlanApMacWhitelistEntry 1.3.6.1.4.1.2011.6.139.11.1.2.2.1
The index of this table is hwWlanApMacWhitelistMacAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApMacWhitelistEntry  

hwWlanApMacWhitelistMacAddr 1.3.6.1.4.1.2011.6.139.11.1.2.2.1.1
This object indicates the MAC address of an AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWlanApMacWhitelistRowStatus 1.3.6.1.4.1.2011.6.139.11.1.2.2.1.2
This object indicates the row status of this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwWlanApSnWhitelistTable 1.3.6.1.4.1.2011.6.139.11.1.2.3
This table is used to add and delete AP sequence numbers in the white lists of AP sequence numbers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApSnWhitelistEntry

hwWlanApSnWhitelistEntry 1.3.6.1.4.1.2011.6.139.11.1.2.3.1
The index of this table is hwWlanApSnWhitelistSn.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApSnWhitelistEntry  

hwWlanApSnWhitelistSn 1.3.6.1.4.1.2011.6.139.11.1.2.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

hwWlanApSnWhitelistRowStatus 1.3.6.1.4.1.2011.6.139.11.1.2.3.1.2
Indicate the row status of this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwWlanApMacBlacklistTable 1.3.6.1.4.1.2011.6.139.11.1.2.4
This table describes the AP MAC blacklist.This table is used to add an AP's MAC address to the blacklist or delete an AP's MAC address from the blacklist.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanApMacBlacklistEntry

hwWlanApMacBlacklistEntry 1.3.6.1.4.1.2011.6.139.11.1.2.4.1
The index of this table is hwWlanApMacBlacklistMacAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanApMacBlacklistEntry  

hwWlanApMacBlacklistMacAddr 1.3.6.1.4.1.2011.6.139.11.1.2.4.1.1
This object indicates the MAC address of an AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWlanApMacBlacklistRowStatus 1.3.6.1.4.1.2011.6.139.11.1.2.4.1.2
This object indicates the row status of this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwAPGroupTable 1.3.6.1.4.1.2011.6.139.11.1.3
This table is used to create or delete AP groups and bind or unbind the AP system profile, 2G radio profile, and domain profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPGroupEntry

hwAPGroupEntry 1.3.6.1.4.1.2011.6.139.11.1.3.1
The index of this table is hwAPGroupName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPGroupEntry  

hwAPGroupName 1.3.6.1.4.1.2011.6.139.11.1.3.1.1
This object indicates the AP group name. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPGrpAPSystemProfile 1.3.6.1.4.1.2011.6.139.11.1.3.1.2
This object indicates the system profile to which AP groups are bound. The default value is default.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPGrpDomainProfile 1.3.6.1.4.1.2011.6.139.11.1.3.1.4
This object indicates the domain profile to which AP groups are bound. The default value is default.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPGrpRowStatus 1.3.6.1.4.1.2011.6.139.11.1.3.1.5
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ROWSTATUS_ACTIVE: active ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPGrpWidsProfile 1.3.6.1.4.1.2011.6.139.11.1.3.1.6
This object indicates the bound WIDS profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPGrpBleProfile 1.3.6.1.4.1.2011.6.139.11.1.3.1.7
This object indicates the bound BLE profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPGroupWiredPortTable 1.3.6.1.4.1.2011.6.139.11.1.4
This table is the AP wired port profile table.This table is used to bind a wired port profile to an AP group or unbind a wired port profile from an AP group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPGroupWiredPortEntry

hwAPGroupWiredPortEntry 1.3.6.1.4.1.2011.6.139.11.1.4.1
Indexes of this table are hwAPGroupName, hwAPGrpWPInterfaceType, and hwAPGrpWPInterfaceNum.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPGroupWiredPortEntry  

hwAPGrpWPInterfaceType 1.3.6.1.4.1.2011.6.139.11.1.4.1.1
This object indicates the interface type. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER fe(1), ge(2), trunk(3), multige(4)  

hwAPGrpWPInterfaceNum 1.3.6.1.4.1.2011.6.139.11.1.4.1.2
This object indicates the interface index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..27  

hwAPGrpWPProfile 1.3.6.1.4.1.2011.6.139.11.1.4.1.3
This object indicates the bound wired port profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPGrpWPRowStatus 1.3.6.1.4.1.2011.6.139.11.1.4.1.4
This object indicates the row status of this table. ROWSTATUS_CREATEAN.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPGroupRadioTable 1.3.6.1.4.1.2011.6.139.11.1.5
This table is used to bind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile to an AP group or unbind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile from an AP group..
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPGroupRadioEntry

hwAPGroupRadioEntry 1.3.6.1.4.1.2011.6.139.11.1.5.1
Indexes of this table are hwAPGroupName and hwAPGrpRadioId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPGroupRadioEntry  

hwAPGrpRadioId 1.3.6.1.4.1.2011.6.139.11.1.5.1.1
This object indicates the radio ID. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..2  

hwAPGrpRadio5gProfile 1.3.6.1.4.1.2011.6.139.11.1.5.1.2
This object indicates the bound 5G radio profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPGrpMeshProfile 1.3.6.1.4.1.2011.6.139.11.1.5.1.3
This object indicates the bound Mesh profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPGrpWdsProfile 1.3.6.1.4.1.2011.6.139.11.1.5.1.4
This object indicates the bound WDS profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPGrpLocationProfile 1.3.6.1.4.1.2011.6.139.11.1.5.1.6
This object indicates the bound location profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPGrpRadioRowStatus 1.3.6.1.4.1.2011.6.139.11.1.5.1.8
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPGrpRadio2gProfile 1.3.6.1.4.1.2011.6.139.11.1.5.1.9
This object indicates the 2G radio profile to which AP groups are bound. The default value is default.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPGrpMeshWhitelistProfile 1.3.6.1.4.1.2011.6.139.11.1.5.1.10
This object indicates the bound whitelist profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPGrpWdsWhitelistProfile 1.3.6.1.4.1.2011.6.139.11.1.5.1.11
This object indicates the bound whitelist profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPGrpRadioSwitch 1.3.6.1.4.1.2011.6.139.11.1.5.1.12
This object indicates the name of a 2G radio profile. It is the index of the table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPGrpRadioChannel 1.3.6.1.4.1.2011.6.139.11.1.5.1.13
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwAPGrpRadioBandwidth 1.3.6.1.4.1.2011.6.139.11.1.5.1.14
This object indicate a bandwidth. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ht20(1), ht40Plus(2), ht40Minus(3), ht80(4), ht160(5), invalid(255)  

hwAPGrpRadioEirp 1.3.6.1.4.1.2011.6.139.11.1.5.1.15
This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..127  

hwAPGrpRadioAntennaGain 1.3.6.1.4.1.2011.6.139.11.1.5.1.16
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..30 | 255  

hwAPGrpRadioCoverageDistance 1.3.6.1.4.1.2011.6.139.11.1.5.1.17
This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..400  

hwAPGrpRadioWorkMode 1.3.6.1.4.1.2011.6.139.11.1.5.1.18
This object indicates the radio working mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), dualband(3)  

hwAPGrpRadioFrequency 1.3.6.1.4.1.2011.6.139.11.1.5.1.19
This object indicates the setting of the frequency band for radio 0. The default value is 1. 1: frequency2G, 2: frequency5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER frequency2G(1), frequency5G(2)  

hwAPGrpSpectrumAnalysisSwitch 1.3.6.1.4.1.2011.6.139.11.1.5.1.20
This object indicates the status of the spectrum analysis function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPGrpWidsDeviceDetectSwitch 1.3.6.1.4.1.2011.6.139.11.1.5.1.21
This object indicates the status of the device detection function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPGrpWidsAttackDetectEnBmp 1.3.6.1.4.1.2011.6.139.11.1.5.1.22
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwAPGrpWidsRogueContainSwitch 1.3.6.1.4.1.2011.6.139.11.1.5.1.23
This object indicates the status of the device detection function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPGrpRadioSecondChannel 1.3.6.1.4.1.2011.6.139.11.1.5.1.24
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwAPGroupVapTable 1.3.6.1.4.1.2011.6.139.11.1.6
This table is used to create VAPs in an AP group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPGroupVapEntry

hwAPGroupVapEntry 1.3.6.1.4.1.2011.6.139.11.1.6.1
Indexes of this table are hwAPGroupName, hwAPGrpRadioId, and hwAPGrpWlanId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPGroupVapEntry  

hwAPGrpWlanId 1.3.6.1.4.1.2011.6.139.11.1.6.1.1
This object indicates the WLAN ID. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16  

hwAPGrpVapProfile 1.3.6.1.4.1.2011.6.139.11.1.6.1.2
This object indicates the bound VAP profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPGrpVapRowStatus 1.3.6.1.4.1.2011.6.139.11.1.6.1.3
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPSpecificTable 1.3.6.1.4.1.2011.6.139.11.1.7
This table is used to create or delete an AP specific profile and bind an AP system profile, 2G radio profile, or domain profile to it or unbind an AP system profile, 2G radio profile, or domain profile from it.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPSpecificEntry

hwAPSpecificEntry 1.3.6.1.4.1.2011.6.139.11.1.7.1
The index of this table is hwAPSpApMac.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPSpecificEntry  

hwAPSpAPSystemProfile 1.3.6.1.4.1.2011.6.139.11.1.7.1.2
This object indicates the system profile bound to the AP specific profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpDomainProfile 1.3.6.1.4.1.2011.6.139.11.1.7.1.4
This object indicates the domain profile bound to the AP specific profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpRowStatus 1.3.6.1.4.1.2011.6.139.11.1.7.1.5
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPSpApMac 1.3.6.1.4.1.2011.6.139.11.1.7.1.6
This object indicates the MAC address of an AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwAPSpApId 1.3.6.1.4.1.2011.6.139.11.1.7.1.7
This object indicates the AP ID.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwAPSpApTypeInfo 1.3.6.1.4.1.2011.6.139.11.1.7.1.8
This object indicates the domain profile bound to the AP specific profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpWidsProfile 1.3.6.1.4.1.2011.6.139.11.1.7.1.9
This object indicates the bound WIDS profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpBleProfile 1.3.6.1.4.1.2011.6.139.11.1.7.1.10
This object indicates the bound BLE profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpLongitude 1.3.6.1.4.1.2011.6.139.11.1.7.1.11
This object indicates the longitude.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

hwAPSpLatitude 1.3.6.1.4.1.2011.6.139.11.1.7.1.12
This object indicates the latitude.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..14)  

hwAPSpApAddressMode 1.3.6.1.4.1.2011.6.139.11.1.7.1.13
This object indicates the IP address allocation mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER invalid(-1), static(1), dhcp(2), slaac(3)  

hwAPSpApIPv4Address 1.3.6.1.4.1.2011.6.139.11.1.7.1.14
This object indicates the AP's IPv4 address. hwAPSpApIPv4Address takes effect if hwAPSpApAddressMode is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwAPSpApIPv4Mask 1.3.6.1.4.1.2011.6.139.11.1.7.1.15
This object indicates the AP's IPv4 mask. hwAPSpApIPv4Mask takes effect if hwAPSpApAddressMode is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwAPSpApIPv4Gateway 1.3.6.1.4.1.2011.6.139.11.1.7.1.16
This object indicates the AP's IPv4 gateway. hwAPSpApIPv4Gateway takes effect if hwAPSpApAddressMode is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwAPSpApIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.7.1.17
This object indicates the AP's IPv6 address. hwAPSpApIPv6Address takes effect if hwAPSpApAddressMode is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..46)  

hwAPSpApIPv6PrefixLen 1.3.6.1.4.1.2011.6.139.11.1.7.1.18
This object indicates the length of the IPv6 address prefix.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..128  

hwAPSpApIPv6Gateway 1.3.6.1.4.1.2011.6.139.11.1.7.1.19
This object indicates the AP's IPv6 gateway. hwAPSpApIPv6Gateway takes effect if hwAPSpApAddressMode is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..46)  

hwAPSpIPv4ACList 1.3.6.1.4.1.2011.6.139.11.1.7.1.20
This object indicates the AC IPv4 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwAPSpIPv6ACList 1.3.6.1.4.1.2011.6.139.11.1.7.1.21
This object indicates the AC IPv6 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwAPSpGroupName 1.3.6.1.4.1.2011.6.139.11.1.7.1.22
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpApName 1.3.6.1.4.1.2011.6.139.11.1.7.1.23
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwAPSpecificWiredPortTable 1.3.6.1.4.1.2011.6.139.11.1.8
This table is used to bind an AP wired port profile to an AP specific profile or unbind an AP wired port profile from an AP specific profile..
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPSpecificWiredPortEntry

hwAPSpecificWiredPortEntry 1.3.6.1.4.1.2011.6.139.11.1.8.1
Indexes of this table are hwAPSpWPInterfaceType, hwAPSpWPInterfaceNum and hwAPSpApMac.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPSpecificWiredPortEntry  

hwAPSpWPInterfaceType 1.3.6.1.4.1.2011.6.139.11.1.8.1.1
This object indicates the interface type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER fe(1), ge(2), trunk(3)  

hwAPSpWPInterfaceNum 1.3.6.1.4.1.2011.6.139.11.1.8.1.2
This object indicates the interface index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..27  

hwAPSpWPProfile 1.3.6.1.4.1.2011.6.139.11.1.8.1.3
This object indicates the bound wired port profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpWPRowStatus 1.3.6.1.4.1.2011.6.139.11.1.8.1.4
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPSpWPApId 1.3.6.1.4.1.2011.6.139.11.1.8.1.5
This object indicates the AP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwAPSpecificRadioTable 1.3.6.1.4.1.2011.6.139.11.1.9
This table records the information about profiles bound based on radio in an AP specific profile, including 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, and spectrum profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPSpecificRadioEntry

hwAPSpecificRadioEntry 1.3.6.1.4.1.2011.6.139.11.1.9.1
Indexes of this table are hwAPSpecificName and hwAPSpRadio.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPSpecificRadioEntry  

hwAPSpRadio 1.3.6.1.4.1.2011.6.139.11.1.9.1.1
This object indicates the radio ID. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..2  

hwAPSp5gRadioProfile 1.3.6.1.4.1.2011.6.139.11.1.9.1.2
This object indicates the bound 5G radio profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpMeshProfile 1.3.6.1.4.1.2011.6.139.11.1.9.1.3
This object indicates the bound Mesh profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpWdsProfile 1.3.6.1.4.1.2011.6.139.11.1.9.1.4
This object indicates the bound WDS profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpLocationProfile 1.3.6.1.4.1.2011.6.139.11.1.9.1.6
This object indicates the bound location profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpRadioRowStatus 1.3.6.1.4.1.2011.6.139.11.1.9.1.8
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPSpRadio2gProfile 1.3.6.1.4.1.2011.6.139.11.1.9.1.9
This object indicates the system profile to which AP groups are bound. The default value is default.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpMeshWhitelistProfile 1.3.6.1.4.1.2011.6.139.11.1.9.1.10
This object indicates the bound whitelist profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpWdsWhitelistProfile 1.3.6.1.4.1.2011.6.139.11.1.9.1.11
This object indicates the bound whitelist profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpRadioSwitch 1.3.6.1.4.1.2011.6.139.11.1.9.1.12
This object indicates the name of a 2G radio profile. It is the index of the table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), invalid(255)  

hwAPSpRadioChannel 1.3.6.1.4.1.2011.6.139.11.1.9.1.13
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwAPSpRadioBandwidth 1.3.6.1.4.1.2011.6.139.11.1.9.1.14
This object indicate a bandwidth. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ht20(1), ht40Plus(2), ht40Minus(3), ht80(4), ht160(5), invalid(255)  

hwAPSpRadioEirp 1.3.6.1.4.1.2011.6.139.11.1.9.1.15
This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..127 | 255  

hwAPSpRadioAntennaGain 1.3.6.1.4.1.2011.6.139.11.1.9.1.16
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..30 | 255  

hwAPSpRadioCoverageDistance 1.3.6.1.4.1.2011.6.139.11.1.9.1.17
This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..400 | 65535  

hwAPSpRadioWorkMode 1.3.6.1.4.1.2011.6.139.11.1.9.1.18
This object indicates the radio working mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), dualband(3), invalid(255)  

hwAPSpRadioFrequency 1.3.6.1.4.1.2011.6.139.11.1.9.1.19
This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER frequency2G(1), frequency5G(2), invalid(255)  

hwAPSpSpectrumAnalysisSwitch 1.3.6.1.4.1.2011.6.139.11.1.9.1.20
This object indicates the status of the spectrum analysis function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), invalid(255)  

hwAPSpWidsDeviceDetectSwitch 1.3.6.1.4.1.2011.6.139.11.1.9.1.21
This object indicates the status of the device detection function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), invalid(255)  

hwAPSpWidsAttackDetectEnBmp 1.3.6.1.4.1.2011.6.139.11.1.9.1.22
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwAPSpWidsRogueContainSwitch 1.3.6.1.4.1.2011.6.139.11.1.9.1.23
This object indicates the status of the device detection function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), invalid(255)  

hwAPSpRadioApId 1.3.6.1.4.1.2011.6.139.11.1.9.1.24
This object indicates the AP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwAPSpRadioSecondChannel 1.3.6.1.4.1.2011.6.139.11.1.9.1.25
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwAPSpecificVapTable 1.3.6.1.4.1.2011.6.139.11.1.10
This table is used to create VAPs in an AP specific profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPSpecificVapEntry

hwAPSpecificVapEntry 1.3.6.1.4.1.2011.6.139.11.1.10.1
Indexes of this table are hwAPSpWlan, hwAPSpRadio, and hwAPSpApMac.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPSpecificVapEntry  

hwAPSpWlan 1.3.6.1.4.1.2011.6.139.11.1.10.1.1
This object indicates the WLAN ID. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16  

hwAPSpVapProfile 1.3.6.1.4.1.2011.6.139.11.1.10.1.2
This object indicates the bound VAP profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPSpVapRowStatus 1.3.6.1.4.1.2011.6.139.11.1.10.1.3
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPSpVapApId 1.3.6.1.4.1.2011.6.139.11.1.10.1.4
This object indicates the AP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRegulatoryDomainProfileTable 1.3.6.1.4.1.2011.6.139.11.1.11
This table is used to configure country codes, calibration channels, and calibration channel bandwidths.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRegulatoryDomainProfileEntry

hwRegulatoryDomainProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.11.1
The index of this table is hwRegulatoryDomainProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRegulatoryDomainProfileEntry  

hwRegulatoryDomainProfileName 1.3.6.1.4.1.2011.6.139.11.1.11.1.1
This object indicates the name of a regulatory domain profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwCountryCode 1.3.6.1.4.1.2011.6.139.11.1.11.1.2
This object indicates the country code. Its value range is subject to the country code table. The default value is CN.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2..8)  

hwDcaChannel5GBandwidth 1.3.6.1.4.1.2011.6.139.11.1.11.1.3
This object indicates the calibration bandwidth on the 5 GHz frequency band. The default value is 1 ? 1: bw20 MHz ? 2: bw40 MHz ? 3: bw80 MHz.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER bw20Mhz(1), bw40Mhz(2), bw80Mhz(3)  

hwDcaChannel5GChannelSet 1.3.6.1.4.1.2011.6.139.11.1.11.1.4
This object indicates the calibration channel set on the 5 GHz frequency band.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwDcaChannel2GChannelSet 1.3.6.1.4.1.2011.6.139.11.1.11.1.5
This object indicates the calibration channel set on the 2 GHz frequency band.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwRegulatoryDomainProfilRowStatus 1.3.6.1.4.1.2011.6.139.11.1.11.1.6
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanWideBandEnable 1.3.6.1.4.1.2011.6.139.11.1.11.1.7
This object indicates wide band status. The default value is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApSystemProfileTable 1.3.6.1.4.1.2011.6.139.11.1.12
This table is used to create or delete an AP system profile and configure AP attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwApSystemProfileEntry

hwApSystemProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.12.1
The index of this table is hwApSystemProfName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwApSystemProfileEntry  

hwApSystemProfName 1.3.6.1.4.1.2011.6.139.11.1.12.1.1
This object indicates the name of an AP system profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwApProfStatInterval 1.3.6.1.4.1.2011.6.139.11.1.12.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..900  

hwApProfSampleTime 1.3.6.1.4.1.2011.6.139.11.1.12.1.4
This object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30. It is expressed in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 2..300  

hwApProfLedSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.5
This object indicates whether to enable the AP's LED indicator. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

hwApProfMaxStaNum 1.3.6.1.4.1.2011.6.139.11.1.12.1.6
This object indicates the maximum number of access users on an AP. The default value is 128.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..256  

hwApProfMtu 1.3.6.1.4.1.2011.6.139.11.1.12.1.7
This object indicates the MTU of an AP interface. The default value is 1500.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 128..1700  

hwApProfMeshRole 1.3.6.1.4.1.2011.6.139.11.1.12.1.8
This object indicates a Mesh role. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mp(1), mpp(2)  

hwApProfTemporaryManagement 1.3.6.1.4.1.2011.6.139.11.1.12.1.9
This object indicates the status of the AP-based offline VAP switch. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfManagementVlan 1.3.6.1.4.1.2011.6.139.11.1.12.1.10
This object indicates the management VLAN for APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4094 | 4294967295  

hwApProfHighTempThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.11
This object indicates the high temperature alarm threshold on an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP NOTE System thresholds vary with different AP types. For details, see AP device information.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 20..110 | 4294967295  

hwApProfLowTempThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.12
This object indicates the low temperature alarm threshold on an AP. The default value 0xFFFF indicates the system threshold of the AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -70..10 | 65535  

hwApProfOpHRxPowerThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.13
This object indicates the high power threshold of an optical module. The default value is 1000.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1000..65535  

hwApProfOpLRxPowerThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.14
This object indicates the low power threshold of an optical module. The default value is 50.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..250  

hwApProfOpHTempThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.15
This object indicates the high temperature threshold of an optical module. The default value is 70.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 70..125  

hwApProfOpLTempThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.16
This object indicates the low temperature threshold of an optical module. The default value is -5.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -40..-5  

hwApProfMemoryUsageThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.17
This object indicates the memory usage alarm threshold of an AP. The default value is 80. It is expressed in percentage.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 30..100  

hwApProfCpuUsageThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.18
This object indicates the CPU usage alarm threshold of an AP. The default value is 90. It is expressed in percentage.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 50..100  

hwApProfTelnetSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.19
This object indicates whether to enable Telnet. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfSTelnetSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.20
This object indicates whether to enable SSH. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfConsoleSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.21
This object indicates whether to enable the console. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfLogRecordLevel 1.3.6.1.4.1.2011.6.139.11.1.12.1.22
This object indicates the log backup level. The default value is 7.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8)  

hwApProfLogServerIp 1.3.6.1.4.1.2011.6.139.11.1.12.1.23
This object indicates the IP address of the log server.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwApProfLogServerIpv6 1.3.6.1.4.1.2011.6.139.11.1.12.1.24
This object indicates the IPv6 address of the log server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwApProfAlarmRestrictionSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.25
This object indicates the status of the alarm suppression switch. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfAlarmRestrictionPeriod 1.3.6.1.4.1.2011.6.139.11.1.12.1.26
This object indicates the alarm suppression period. The default value is 60 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..300  

hwApProfKeepServiceSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.27
This object indicates whether to enable the offline service retaining function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), allowaccess(3)  

hwApProfProtectPriority 1.3.6.1.4.1.2011.6.139.11.1.12.1.28
This object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7 | 4294967295  

hwApProfProtectACIp 1.3.6.1.4.1.2011.6.139.11.1.12.1.29
This object indicates the IP address of the standby AC.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwApProfProtectACIpv6 1.3.6.1.4.1.2011.6.139.11.1.12.1.30
This object indicates the IPv6 address of the standby AC.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwApProfEapStartMode 1.3.6.1.4.1.2011.6.139.11.1.12.1.31
This object indicates the EAP Start packet conversion mode. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER broadcast(1), multicast(2), unicast(3)  

hwApProfEapStartTransform 1.3.6.1.4.1.2011.6.139.11.1.12.1.32
This object indicates the EAP Start packet conversion mode. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER equalBssid(1), always(2)  

hwApProfEapStartUnicastMac 1.3.6.1.4.1.2011.6.139.11.1.12.1.33
This object indicates that EAP Start packets are converted to those with specific MAC addresses.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwApProfEapResponseMode 1.3.6.1.4.1.2011.6.139.11.1.12.1.34
This object indicates the EAP Response packet conversion mode. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER broadcast(1), multicast(2), specific(3), learnling(4)  

hwApProfEapResponseTransform 1.3.6.1.4.1.2011.6.139.11.1.12.1.35
This object indicates the EAP Response packet conversion mode. The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER equalBssid(1), always(2)  

hwApProfEapResponseUnicastMac 1.3.6.1.4.1.2011.6.139.11.1.12.1.36
This object indicates that EAP Response packets are converted to those with specific MAC addresses.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwApProfLldpRestartDelay 1.3.6.1.4.1.2011.6.139.11.1.12.1.37
This object indicates the delay for re-enabling LLDP. The default value is 2. It is expressed in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

hwApProfLldpAdminStatus 1.3.6.1.4.1.2011.6.139.11.1.12.1.38
This object indicates the operation mode of LLDP. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER txrx(1), rx(2), tx(3)  

hwApProfLldpRetransDelay 1.3.6.1.4.1.2011.6.139.11.1.12.1.39
This object indicates the message retransmitting delay. The default value is 2. It is expressed in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..8192  

hwApProfLldpRetransHoldMultiplier 1.3.6.1.4.1.2011.6.139.11.1.12.1.40
This object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 2..10  

hwApProfLldpInterval 1.3.6.1.4.1.2011.6.139.11.1.12.1.41
This object indicates the interval at which LLDP packets are sent. The default value is 30 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..32768  

hwApProfLldpReportInterval 1.3.6.1.4.1.2011.6.139.11.1.12.1.42
This object indicates the interval at which LLDP packets are reported. The default value is 30 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..3600  

hwApProfStaAccessMode 1.3.6.1.4.1.2011.6.139.11.1.12.1.43
This object indicates the access mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(-1), disable(1), blacklist(2), whitelist(3)  

hwApProfStaAccessModeProfile 1.3.6.1.4.1.2011.6.139.11.1.12.1.44
This object indicates blacklist and whitelist profiles.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwApProfRowStatus 1.3.6.1.4.1.2011.6.139.11.1.12.1.45
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwApProfSFTPSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.46
This object indicates whether to enable the SFTP. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfDynamicBlackListAgingTime 1.3.6.1.4.1.2011.6.139.11.1.12.1.47
This object indicates the aging time of the dynamic blacklist entries. The default value is 600.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 180..3600  

hwApProfAntennaOutputMode 1.3.6.1.4.1.2011.6.139.11.1.12.1.48
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER combine(1), split(2)  

hwApProfMppActiveReselectionSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.49
This object indicates of mpp active reselection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfSpectrumServerIPAddress 1.3.6.1.4.1.2011.6.139.11.1.12.1.50
This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, the IPv4 address 255.255.255.255 is used.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwApProfSpectrumServerIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.12.1.51
This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, it is not configured.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwApProfSpectrumServerPort 1.3.6.1.4.1.2011.6.139.11.1.12.1.52
This object indicates the port of the spectrum analysis server. The default value is 32181.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 5000..65535  

hwApProfSpectrumViaACSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.53
This object indicates the status of the spectrum analysis function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfSpectrumViaACPort 1.3.6.1.4.1.2011.6.139.11.1.12.1.54
This object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 6412.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 5000..65535  

hwApProfSpectrumNonWifiDeviceAgingTime 1.3.6.1.4.1.2011.6.139.11.1.12.1.55
This object indicates the aging time of non-WLAN devices on the AC. The default value is 3 minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

hwApProfPoeMaxPower 1.3.6.1.4.1.2011.6.139.11.1.12.1.56
This object indicates the maximum output power of the AP.The default value is 380000.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 15400..380000  

hwApProfPoePowerReserved 1.3.6.1.4.1.2011.6.139.11.1.12.1.57
This object indicates the percentage of reserved PoE power to the available PoE power.The default value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100 | 255  

hwApProfPoePowerThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.58
This object indicates the alarm threshold of PoE power consumption percentage.The default value is 100.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100 | 255  

hwApProfPoeAfInrushSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.59
This object indicates whether to enable the IEEE 802.3at-compliant device to provide power in accordance with IEEE 802.3af.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfPoeHighInrushSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.60
This object indicates whether to enable the device to allow high inrush current during power-on.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfPrimaryLinkIPv4 1.3.6.1.4.1.2011.6.139.11.1.12.1.61
This object indicates the IP address of the primary AC.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwApProfPrimaryLinkIPv6 1.3.6.1.4.1.2011.6.139.11.1.12.1.62
This object indicates the IPv6 address of the primary AC.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwApProfBackupLinkIPv4 1.3.6.1.4.1.2011.6.139.11.1.12.1.63
This object indicates the IP address of the backup AC.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwApProfBackupLinkIPv6 1.3.6.1.4.1.2011.6.139.11.1.12.1.64
This object indicates the IPv6 address of the backup AC.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwApProfLedOffTimeRange 1.3.6.1.4.1.2011.6.139.11.1.12.1.65
This object indicates whether to make a configured Led off time range effective.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwApProfUsbSwitch 1.3.6.1.4.1.2011.6.139.11.1.12.1.66
This object indicates whether to enable the USB. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfBroadcastSuppressionArpEnable 1.3.6.1.4.1.2011.6.139.11.1.12.1.67
This object indicates whether to enable the arp broadcast suppression.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfBroadcastSuppressionArpThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.68
This object indicates the threshold of arp broadcast suppression. The default value is 256.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..1024  

hwApProfBroadcastSuppressionIgmpEnable 1.3.6.1.4.1.2011.6.139.11.1.12.1.69
This object indicates whether to enable the igmp broadcast suppression.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfBroadcastSuppressionIgmpThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.70
This object indicates the threshold of igmp broadcast suppression. The default value is 256.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..1024  

hwApProfBroadcastSuppressionNdEnable 1.3.6.1.4.1.2011.6.139.11.1.12.1.71
This object indicates whether to enable the nd broadcast suppression.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfBroadcastSuppressionNdThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.72
This object indicates the threshold of nd broadcast suppression. The default value is 256.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..1024  

hwApProfBroadcastSuppressionOtherEnable 1.3.6.1.4.1.2011.6.139.11.1.12.1.73
This object indicates whether to enable the other broadcast suppression.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwApProfBroadcastSuppressionOtherThreshold 1.3.6.1.4.1.2011.6.139.11.1.12.1.74
This object indicates the threshold of other broadcast suppression. The default value is 256.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..1024  

hwApProfBroadcastSuppressionAllEnable 1.3.6.1.4.1.2011.6.139.11.1.12.1.75
This object indicates whether to enable all the broadcast suppression.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPWiredPortProfileTable 1.3.6.1.4.1.2011.6.139.11.1.13
This table is used to create or delete an AP wired port link profile and modify or query attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPWiredPortProfileEntry

hwAPWiredPortProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.13.1
The index of this table is hwAPWiredPortProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPWiredPortProfileEntry  

hwAPWiredPortProfileName 1.3.6.1.4.1.2011.6.139.11.1.13.1.1
This object indicates the name of an AP wired port link profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPWiredPortPortLinkProfileName 1.3.6.1.4.1.2011.6.139.11.1.13.1.2
This object indicates the bound AP wired port link profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPWiredPortProfilePortDesc 1.3.6.1.4.1.2011.6.139.11.1.13.1.3
This object indicates the description of an interface.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwAPWiredPortProfilePortEthTrunkID 1.3.6.1.4.1.2011.6.139.11.1.13.1.4
This object indicates the ID of a Trunk. 0 is valid and 0xFFFFFFFF is invalid. The default value is 0xFFFFFFFF.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 255  

hwAPWiredPortProfilePortSTPSwitch 1.3.6.1.4.1.2011.6.139.11.1.13.1.5
This object indicates whether to enable STP on wired ports. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPWiredPortProfilePortMode 1.3.6.1.4.1.2011.6.139.11.1.13.1.6
This object indicates the mode of the wired port. For FE ports of plate APs, the default value is 2. For other ports, the default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER root(1), endpoint(2), middle(3), null(256)  

hwAPWiredPortProfilePortVlanPvid 1.3.6.1.4.1.2011.6.139.11.1.13.1.7
This object indicates the PVID of a port. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4094  

hwAPWiredPortProfilePortVlanTagged 1.3.6.1.4.1.2011.6.139.11.1.13.1.8
This object indicates whether to tag ports with VLAN IDs. The default value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

hwAPWiredPortProfilePortVlanUntagged 1.3.6.1.4.1.2011.6.139.11.1.13.1.9
This object indicates whether to untag VLAN IDS from ports. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

hwAPWiredPortProfileUserIsolate 1.3.6.1.4.1.2011.6.139.11.1.13.1.10
This object indicates the status of the user isolation function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), l3Isolate(2), l2Isolate(3)  

hwAPWiredPortProfileDhcpTrust 1.3.6.1.4.1.2011.6.139.11.1.13.1.11
This object indicates whether a port is configured as a DHCP trusted port. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPWiredPortProfileNdTrust 1.3.6.1.4.1.2011.6.139.11.1.13.1.12
This object indicates whether a port is configured as a ND trusted port. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPWiredPortProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.13.1.13
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwAPWiredPortProfileLearnAddress 1.3.6.1.4.1.2011.6.139.11.1.13.1.14
This object indicates whether to enable address learning.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPWiredPortProfileIpBindCheck 1.3.6.1.4.1.2011.6.139.11.1.13.1.15
This object indicates whether to enable IP packet checking against the binding table.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPWiredPortProfileArpBindCheck 1.3.6.1.4.1.2011.6.139.11.1.13.1.16
This object indicates whether to enable ARP packet checking against the binding table.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPWiredPortProfileSTPAutoShutdown 1.3.6.1.4.1.2011.6.139.11.1.13.1.17
This object indicates whether to enable STP-triggered port shutdown.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPWiredPortProfileSTPAutoShutdownRecoveryTime 1.3.6.1.4.1.2011.6.139.11.1.13.1.18
This object indicates the automatic port recovery time after an STP-triggered shutdown.The default value is 600.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 600..3600  

hwAPWiredPortProfileTrafficOptimizeSuppressionBc 1.3.6.1.4.1.2011.6.139.11.1.13.1.19
This object indicates the rate limit for broadcast storm suppression.The default value is 0xFFFFFFFF.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..14881000  

hwAPWiredPortProfileTrafficOptimizeSuppressionUc 1.3.6.1.4.1.2011.6.139.11.1.13.1.20
This object indicates the rate limit for unknown unicast storm suppression.The default value is 0xFFFFFFFF.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..14881000  

hwAPWiredPortProfileTrafficOptimizeSuppressionMc 1.3.6.1.4.1.2011.6.139.11.1.13.1.21
This object indicates the rate limit for multicast storm suppression.The default value is 0xFFFFFFFF.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..14881000  

hwAPWiredPortProfileIGMPSnooping 1.3.6.1.4.1.2011.6.139.11.1.13.1.22
This object indicates whether to enable IGMP-snooping.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPWiredPortProfileTrafficFilterTable 1.3.6.1.4.1.2011.6.139.11.1.14
This table is used to configure ACL-based packet filtering in an AP wired port profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPWiredPortProfileTrafficFilterEntry

hwAPWiredPortProfileTrafficFilterEntry 1.3.6.1.4.1.2011.6.139.11.1.14.1
Indexes of this table are hwAPWiredPortProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPWiredPortProfileTrafficFilterEntry  

hwAPWiredPortProfileTrafficFilterDirection 1.3.6.1.4.1.2011.6.139.11.1.14.1.1
This object indicates the direction of the ACL-based packet filtering.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

hwAPWiredPortProfileTrafficFilterType 1.3.6.1.4.1.2011.6.139.11.1.14.1.2
This object indicates the type of the ACL-based packet filtering.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), l2(3)  

hwAPWiredPortProfileTrafficFilterAclID 1.3.6.1.4.1.2011.6.139.11.1.14.1.3
This object indicates ACL rules for packet filtering.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3000..3031 | 4000..4031  

hwAPWiredPortProfileTrafficFilterRowStatus 1.3.6.1.4.1.2011.6.139.11.1.14.1.4
This object indicates packet filtering rules configured on the wired interface.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwAPPortLinkProfileTable 1.3.6.1.4.1.2011.6.139.11.1.15
This table is used to create or delete an AP wired port link profile and configure parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPPortLinkProfileEntry

hwAPPortLinkProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.15.1
The index of this table is hwAPPortLinkProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPPortLinkProfileEntry  

hwAPPortLinkProfileName 1.3.6.1.4.1.2011.6.139.11.1.15.1.1
This object indicates the name of an AP wired port link profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPPortLinkProfileLldpEnable 1.3.6.1.4.1.2011.6.139.11.1.15.1.2
This object indicates the status of the LLDP function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPPortLinkProfileLldpTlvType 1.3.6.1.4.1.2011.6.139.11.1.15.1.3
This object indicates the types of TLVs that can be advertised from an AP's wired port. The default value is all(0x11) ? 0: invalid ? bit0: management-address ? bit1: port-description ? bit2: system-capability ? bit3: system-description ? bit4: system-name.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..31  

hwAPPortLinkProfileCrcAlarmEnable 1.3.6.1.4.1.2011.6.139.11.1.15.1.4
This object indicates the status of the CRC error alarm function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPPortLinkProfileCrcAlarmThreshold 1.3.6.1.4.1.2011.6.139.11.1.15.1.5
This object indicates a CRC error alarm threshold. The default value is 50. It is expressed in percentage.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwAPPortLinkProfileCrcAlarmResumeThreshold 1.3.6.1.4.1.2011.6.139.11.1.15.1.6
This object indicates a CRC error alarm clearing threshold. The default value is 20. It is expressed in percentage.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwAPPortLinkProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.15.1.7
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE:notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwAPPortLinkProfilePoeSwitch 1.3.6.1.4.1.2011.6.139.11.1.15.1.8
This object indicates whether to enable the PoE function on the interface.The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPPortLinkProfilePoePriority 1.3.6.1.4.1.2011.6.139.11.1.15.1.9
This object indicates the power priority of PoE interfaces.The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER critical(1), high(2), low(3)  

hwAPPortLinkProfilePoeForcePowerSwitch 1.3.6.1.4.1.2011.6.139.11.1.15.1.10
This object indicates whether to enable forcible PoE power supply on an interface.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPPortLinkProfilePoeLegacySwitch 1.3.6.1.4.1.2011.6.139.11.1.15.1.11
This object indicates whether to enable the PSE to check compatibility of the connected PDs.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPPortLinkProfilePoeOffTimeRange 1.3.6.1.4.1.2011.6.139.11.1.15.1.12
This object indicates whether to make a configured PoE power-off time range effective on interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwAPPortLinkProfileAdminStatus 1.3.6.1.4.1.2011.6.139.11.1.15.1.13
This object indicates whether to enable port shutdown.The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER down(1), up(2)  

hwAPPortLinkProfileEEESwitch 1.3.6.1.4.1.2011.6.139.11.1.15.1.14
This object indicates whether to enable the EEE function on the interface.The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioProfileTable 1.3.6.1.4.1.2011.6.139.11.1.16
This table is used to configure 2.4 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan and RRM profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hw2gRadioProfileEntry

hw2gRadioProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.16.1
The index of this table is hw2gRadioProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hw2gRadioProfileEntry  

hw2gRadioProfileName 1.3.6.1.4.1.2011.6.139.11.1.16.1.1
This object indicates the name of a 2G radio profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hw2gRadioBeaconInterval 1.3.6.1.4.1.2011.6.139.11.1.16.1.6
This object indicates a Beacon interval. The default value is 100. It is expressed in ms.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..1000  

hw2gRadioGuardIntervalMode 1.3.6.1.4.1.2011.6.139.11.1.16.1.10
This object indicates the GI mode. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER short(1), normal(2)  

hw2gRadioShortPreamble 1.3.6.1.4.1.2011.6.139.11.1.16.1.11
This object indicates the preamble mode. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioFragmentationThreshold 1.3.6.1.4.1.2011.6.139.11.1.16.1.12
This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 256..2346  

hw2gRadioHtAmpduSwitch 1.3.6.1.4.1.2011.6.139.11.1.16.1.13
This object indicates the status of the aggregation function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioHtAmpduMaxLengthExponent 1.3.6.1.4.1.2011.6.139.11.1.16.1.14
This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes ? 1: 16383 bytes ? 2: 32767 bytes ? 3: 65535 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3  

hw2gRadioDot11bgBasicRate 1.3.6.1.4.1.2011.6.139.11.1.16.1.15
This object indicates the basic rate set of the 802.11bg protocol. The default value is 3 ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6: 12 Mbit/s ? bit7: 18 Mbit/s ? bit8: 24 Mbit/s ? bit9: 36 Mbit/s ? bit10: 48 Mbit/s ? bit11: 54 Mbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4095  

hw2gRadioDot11bgSupportRate 1.3.6.1.4.1.2011.6.139.11.1.16.1.16
This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFFF ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s ? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4095  

hw2gRadioMulticastRate 1.3.6.1.4.1.2011.6.139.11.1.16.1.17
This object indicates the multicast rate. The default value is 0x2F ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6: 12 Mbit/s ? bit7: 18 Mbit/s ? bit8: 24 Mbit/s ? bit9: 36 Mbit/s ? bit10: 48 Mbit/s ? bit11: 54 Mbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hw2gRadioWmmMandatorySwitch 1.3.6.1.4.1.2011.6.139.11.1.16.1.18
This object indicates the status of the mandatory WMM matching function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioApEDCAVoiceECWmax 1.3.6.1.4.1.2011.6.139.11.1.16.1.19
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw2gRadioApEDCAVoiceECWmin 1.3.6.1.4.1.2011.6.139.11.1.16.1.20
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw2gRadioApEDCAVoiceAIFSN 1.3.6.1.4.1.2011.6.139.11.1.16.1.21
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hw2gRadioApEDCAVoiceTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.16.1.22
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hw2gRadioApEDCAVoiceAckPolicy 1.3.6.1.4.1.2011.6.139.11.1.16.1.23
This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), noAck(2)  

hw2gRadioApEDCAVideoECWmax 1.3.6.1.4.1.2011.6.139.11.1.16.1.24
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw2gRadioApEDCAVideoECWmin 1.3.6.1.4.1.2011.6.139.11.1.16.1.25
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw2gRadioApEDCAVideoAIFSN 1.3.6.1.4.1.2011.6.139.11.1.16.1.26
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hw2gRadioApEDCAVideoTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.16.1.27
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hw2gRadioApEDCAVideoAckPolicy 1.3.6.1.4.1.2011.6.139.11.1.16.1.28
This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), noAck(2)  

hw2gRadioApEDCABEECWmax 1.3.6.1.4.1.2011.6.139.11.1.16.1.29
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 6.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw2gRadioApEDCABEECWmin 1.3.6.1.4.1.2011.6.139.11.1.16.1.30
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw2gRadioApEDCABEAIFSN 1.3.6.1.4.1.2011.6.139.11.1.16.1.31
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hw2gRadioApEDCABETXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.16.1.32
This object indicates the EDCA parameter TXOPLimit for BE services on APs. It indicates the transmission opportunity limit. The default value is 0. The unit is 32 us.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hw2gRadioApEDCABEAckPolicy 1.3.6.1.4.1.2011.6.139.11.1.16.1.33
This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), noAck(2)  

hw2gRadioApEDCABKECWmax 1.3.6.1.4.1.2011.6.139.11.1.16.1.34
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 10.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw2gRadioApEDCABKECWmin 1.3.6.1.4.1.2011.6.139.11.1.16.1.35
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw2gRadioApEDCABKAIFSN 1.3.6.1.4.1.2011.6.139.11.1.16.1.36
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hw2gRadioApEDCABKTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.16.1.37
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hw2gRadioApEDCABKAckPolicy 1.3.6.1.4.1.2011.6.139.11.1.16.1.38
This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), noAck(2)  

hw2gRadioWmmSwitch 1.3.6.1.4.1.2011.6.139.11.1.16.1.39
This object indicates the status of the WMM function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioRtsCtsThreshold 1.3.6.1.4.1.2011.6.139.11.1.16.1.40
This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 2347. It is expressed in bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..2347  

hw2gRadioRtsCtsMode 1.3.6.1.4.1.2011.6.139.11.1.16.1.41
This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), ctsToSelf(2), rtsCts(3)  

hw2gRadioPowerAutoAdjustSwitch 1.3.6.1.4.1.2011.6.139.11.1.16.1.42
This object indicates the status of the user-by-user power control function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioBeamformingSwitch 1.3.6.1.4.1.2011.6.139.11.1.16.1.43
This object indicates the status of the beamforming function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioWifiLight 1.3.6.1.4.1.2011.6.139.11.1.16.1.44
This object indicates information reflected by the blinking frequency of the Wireless LED on an AP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER signalStrength(1), traffic(2)  

hw2gRadioChannelSwitchAnnouncementSwitch 1.3.6.1.4.1.2011.6.139.11.1.16.1.45
This object indicates the status of the channel switchover announcement function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioChannelSwitchMode 1.3.6.1.4.1.2011.6.139.11.1.16.1.46
This object indicates the channel switch announcement mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER continueTransmitting(1), stopTransmitting(2)  

hw2gRadioAutoOffServiceSwitch 1.3.6.1.4.1.2011.6.139.11.1.16.1.47
This object indicates the status of the scheduled radio disabling function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioAutoOffServiceStartTime 1.3.6.1.4.1.2011.6.139.11.1.16.1.48
This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

hw2gRadioAutoOffServiceEndTime 1.3.6.1.4.1.2011.6.139.11.1.16.1.49
This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

hw2gRadioInterferenceDetectSwitch 1.3.6.1.4.1.2011.6.139.11.1.16.1.50
This object indicates the status of the user-by-user power control function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioInterferenceIntraFrequencyThreshold 1.3.6.1.4.1.2011.6.139.11.1.16.1.51
This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hw2gRadioInterferenceAdjacentFrequencyThreshold 1.3.6.1.4.1.2011.6.139.11.1.16.1.52
This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hw2gRadioInterferenceStationThreshold 1.3.6.1.4.1.2011.6.139.11.1.16.1.53
This object indicates the alarm threshold for station interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC.The default value is 32.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..256  

hw2gRadioRrmProfile 1.3.6.1.4.1.2011.6.139.11.1.16.1.54
This object indicates the bound RRM profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hw2gRadioAirScanProfile 1.3.6.1.4.1.2011.6.139.11.1.16.1.55
This object indicates the bound air scan profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hw2gRadioProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.16.1.56
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hw2gRadioProfileUtmostPowerSwitch 1.3.6.1.4.1.2011.6.139.11.1.16.1.57
This object indicates the switch for the function of sending packets at maximum power.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioProfileRadioType 1.3.6.1.4.1.2011.6.139.11.1.16.1.59
This object indicates the type of radio. The default value is 9.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dot11b(1), dot11g(5), dot11n(9)  

hw2gRadioProfileSmartAntennaEnable 1.3.6.1.4.1.2011.6.139.11.1.16.1.60
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw2gRadioProfileTxChainNum 1.3.6.1.4.1.2011.6.139.11.1.16.1.61
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4  

hw2gRadioProfileRxChainNum 1.3.6.1.4.1.2011.6.139.11.1.16.1.62
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4  

hw2gRadioProfileAutoOffTimeRange 1.3.6.1.4.1.2011.6.139.11.1.16.1.63
This object indicates the time range for disabling the radio.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hw5gRadioProfileTable 1.3.6.1.4.1.2011.6.139.11.1.17
This table is used to configure 5 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan profiles and RRM profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hw5gRadioProfileEntry

hw5gRadioProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.17.1
The index of this table is hw5gRadioProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hw5gRadioProfileEntry  

hw5gRadioProfileName 1.3.6.1.4.1.2011.6.139.11.1.17.1.1
This object indicates the name of a 5G radio profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hw5gRadioBeaconInterval 1.3.6.1.4.1.2011.6.139.11.1.17.1.6
This object indicates a Beacon interval. The default value is 100. It is expressed in ms.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..1000  

hw5gRadioGuardIntervalMode 1.3.6.1.4.1.2011.6.139.11.1.17.1.10
This object indicates the GI mode. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER short(1), normal(2)  

hw5gRadioShortPreamble 1.3.6.1.4.1.2011.6.139.11.1.17.1.11
This object indicates whether the short preamble is enabled. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioFragmentationThreshold 1.3.6.1.4.1.2011.6.139.11.1.17.1.12
This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 256..2346  

hw5gRadioHtAmpduSwitch 1.3.6.1.4.1.2011.6.139.11.1.17.1.13
This object indicates the status of the aggregation function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioHtAmpduMaxLengthExponent 1.3.6.1.4.1.2011.6.139.11.1.17.1.14
This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes ? 3: 65535 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

hw5gRadioVhtAmpduMaxLengthExponent 1.3.6.1.4.1.2011.6.139.11.1.17.1.15
This object indicates the maximum length of frames converged by an MPDU. The default value is 7 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes? 3: 65535 bytes? 4: 131071 bytes? 5: 262143 bytes? 6: 524287 bytes? 7: 1048575 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

hw5gRadioVhtAmsduSwitch 1.3.6.1.4.1.2011.6.139.11.1.17.1.16
This object indicates the status of the A-MSDU aggregation function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioVhtAmsduMaxFrameNum 1.3.6.1.4.1.2011.6.139.11.1.17.1.17
This object indicates the maximum number of sub-frames that can be aggregated into an A-MSDU. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 2..15  

hw5gRadioDot11aBasicRate 1.3.6.1.4.1.2011.6.139.11.1.17.1.18
This object indicates the basic rate set of the 802.11bg protocol. The default value is 0x148 (6 Mbit/s/12 Mbit/s/24 Mbit/s) ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4095  

hw5gRadioDot11aSupportRate 1.3.6.1.4.1.2011.6.139.11.1.17.1.19
This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFD8 (6 Mbit/s/9 Mbit/s/12 Mbit/s/18 Mbit/s/24 Mbit/s/36 Mbit/s/48 Mbit/s/54 Mbit/s).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4095  

hw5gRadioMulticastRate 1.3.6.1.4.1.2011.6.139.11.1.17.1.20
This object indicates the multicast rate. The default value is 0x8(6M).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hw5gRadioVhtNssMapMaxMcs 1.3.6.1.4.1.2011.6.139.11.1.17.1.21
This object indicates the maximum MCS value for 802.11ac radios. The number of spatial flows is 4 and the maximum MCS value is 7-9. The format is x?x?x?x. The default value is 9?9?9?9.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hw5gRadioWmmMandatorySwitch 1.3.6.1.4.1.2011.6.139.11.1.17.1.22
This object indicates the status of the mandatory WMM matching function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioApEDCAVoiceECWmax 1.3.6.1.4.1.2011.6.139.11.1.17.1.23
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw5gRadioApEDCAVoiceECWmin 1.3.6.1.4.1.2011.6.139.11.1.17.1.24
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw5gRadioApEDCAVoiceAIFSN 1.3.6.1.4.1.2011.6.139.11.1.17.1.25
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hw5gRadioApEDCAVoiceTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.17.1.26
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hw5gRadioApEDCAVoiceAckPolicy 1.3.6.1.4.1.2011.6.139.11.1.17.1.27
This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), noAck(2)  

hw5gRadioApEDCAVideoECWmax 1.3.6.1.4.1.2011.6.139.11.1.17.1.28
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw5gRadioApEDCAVideoECWmin 1.3.6.1.4.1.2011.6.139.11.1.17.1.29
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw5gRadioApEDCAVideoAIFSN 1.3.6.1.4.1.2011.6.139.11.1.17.1.30
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hw5gRadioApEDCAVideoTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.17.1.31
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hw5gRadioApEDCAVideoAckPolicy 1.3.6.1.4.1.2011.6.139.11.1.17.1.32
This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), noAck(2)  

hw5gRadioApEDCABEECWmax 1.3.6.1.4.1.2011.6.139.11.1.17.1.33
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 6.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw5gRadioApEDCABEECWmin 1.3.6.1.4.1.2011.6.139.11.1.17.1.34
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw5gRadioApEDCABEAIFSN 1.3.6.1.4.1.2011.6.139.11.1.17.1.35
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hw5gRadioApEDCABETXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.17.1.36
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BE services on APs. The default value is 0. The unit is 32 us.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hw5gRadioApEDCABEAckPolicy 1.3.6.1.4.1.2011.6.139.11.1.17.1.37
This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), noAck(2)  

hw5gRadioApEDCABKECWmax 1.3.6.1.4.1.2011.6.139.11.1.17.1.38
This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 10.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw5gRadioApEDCABKECWmin 1.3.6.1.4.1.2011.6.139.11.1.17.1.39
This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hw5gRadioApEDCABKAIFSN 1.3.6.1.4.1.2011.6.139.11.1.17.1.40
This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7..
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hw5gRadioApEDCABKTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.17.1.41
This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hw5gRadioApEDCABKAckPolicy 1.3.6.1.4.1.2011.6.139.11.1.17.1.42
This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), noAck(2)  

hw5gRadioWmmSwitch 1.3.6.1.4.1.2011.6.139.11.1.17.1.43
This object indicates the status of the WMM function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioRtsCtsThreshold 1.3.6.1.4.1.2011.6.139.11.1.17.1.44
This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 2347 bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..2347  

hw5gRadioRtsCtsMode 1.3.6.1.4.1.2011.6.139.11.1.17.1.45
This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), ctsToSelf(2), rtsCts(3)  

hw5gRadioPowerAutoAdjustSwitch 1.3.6.1.4.1.2011.6.139.11.1.17.1.46
This object indicates the status of the user-by-user power control function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioBeamformingSwitch 1.3.6.1.4.1.2011.6.139.11.1.17.1.47
This object indicates the status of the beamforming function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioWifiLight 1.3.6.1.4.1.2011.6.139.11.1.17.1.48
This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1 NOTE ? If Mesh is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the AP with the weakest signal among received signals from all neighboring APs.? If WDS is enabled on an AP, the the Wireless indicator blinking frequency reflects the signal strength of the connected WDS AP.? For a Leaf AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP.? For a Middle AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Root AP.? For a root AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP with the weakest signal.? If WDS or Mesh is not enabled on an AP, the Wireless indicator blinking frequency reflects the service traffic volume on the radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER signalStrength(1), traffic(2)  

hw5gRadioChannelSwitchAnnouncementSwitch 1.3.6.1.4.1.2011.6.139.11.1.17.1.49
This object indicates the status of the channel switchover announcement function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioChannelSwitchMode 1.3.6.1.4.1.2011.6.139.11.1.17.1.50
This object indicates the channel switch announcement mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER continueTransmitting(1), stopTransmitting(2)  

hw5gRadioAutoOffServiceSwitch 1.3.6.1.4.1.2011.6.139.11.1.17.1.51
This object indicates the status of the scheduled radio disabling function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioAutoOffServiceStartTime 1.3.6.1.4.1.2011.6.139.11.1.17.1.52
This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59..
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

hw5gRadioAutoOffServiceEndTime 1.3.6.1.4.1.2011.6.139.11.1.17.1.53
This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss. NOTE? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

hw5gRadioInterferenceDetectSwitch 1.3.6.1.4.1.2011.6.139.11.1.17.1.54
This object indicates the status of the user-by-user power control function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioInterferenceIntraFrequencyThreshold 1.3.6.1.4.1.2011.6.139.11.1.17.1.55
This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hw5gRadioInterferenceAdjacentFrequencyThreshold 1.3.6.1.4.1.2011.6.139.11.1.17.1.56
This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hw5gRadioInterferenceStationThreshold 1.3.6.1.4.1.2011.6.139.11.1.17.1.57
This object indicates the alarm threshold for adjacent-channel interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC. The default value is 32.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..256  

hw5gRadioRrmProfile 1.3.6.1.4.1.2011.6.139.11.1.17.1.58
This object indicates the bound RRM profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hw5gRadioAirScanProfile 1.3.6.1.4.1.2011.6.139.11.1.17.1.59
This object indicates the bound air scan profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hw5gRadioProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.17.1.60
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hw5gRadioProfileUtmostPowerSwitch 1.3.6.1.4.1.2011.6.139.11.1.17.1.61
This object indicates the switch for the function of sending packets at maximum power.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioProfileRadioType 1.3.6.1.4.1.2011.6.139.11.1.17.1.63
This object indicates the type of radio. The default value is 14.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dot11a(2), dot11n(6), dot11ac(14)  

hw5gRadioProfileSmartAntennaEnable 1.3.6.1.4.1.2011.6.139.11.1.17.1.64
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioProfileMuMIMOEnable 1.3.6.1.4.1.2011.6.139.11.1.17.1.65
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hw5gRadioProfileTxChainNum 1.3.6.1.4.1.2011.6.139.11.1.17.1.66
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4  

hw5gRadioProfileRxChainNum 1.3.6.1.4.1.2011.6.139.11.1.17.1.67
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4  

hw5gRadioProfileAutoOffTimeRange 1.3.6.1.4.1.2011.6.139.11.1.17.1.68
This object indicates the time range for disabling the radio.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwRrmProfileTable 1.3.6.1.4.1.2011.6.139.11.1.18
This table is used to configure radio resource management parameters, including parameters related to band steering, dynamic load balancing, smart roaming, and UAC.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRrmProfileEntry

hwRrmProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.18.1
The index of this table is hwRrmProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRrmProfileEntry  

hwRrmProfileName 1.3.6.1.4.1.2011.6.139.11.1.18.1.1
This object indicates the name of the RRM profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwRrmAutoChannelSelectSwitch 1.3.6.1.4.1.2011.6.139.11.1.18.1.2
This object indicates the status of the automatic channel selection function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRrmAutoTxPowerSelectSwitch 1.3.6.1.4.1.2011.6.139.11.1.18.1.3
This object indicates the status of the automatic power selection function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRrmErrRateThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.4
This object indicate the error packet threshold triggering the automatic channel or power selection function. The default value is 50. It is expressed in percentage.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 20..80  

hwRrmAirtimeFairSchduleSwitch 1.3.6.1.4.1.2011.6.139.11.1.18.1.5
This object indicates the status of the airtime scheduling function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRrmDynamicEdcaSwitch 1.3.6.1.4.1.2011.6.139.11.1.18.1.6
This object indicates the status of the dynamic EDCA parameter adjustment function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRrmUacLimitClientSnrSwitch 1.3.6.1.4.1.2011.6.139.11.1.18.1.7
This object indicates the status of the rejecting access from terminals with weak signals function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRrmUacClientSnrThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.8
This object indicates the SNR threshold for rejecting access from terminals. The default value is 15. It is expressed in dB.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..75 | 255  

hwRrmUacPolicySwitch 1.3.6.1.4.1.2011.6.139.11.1.18.1.9
This object indicates the status of the UAC policy function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRrmUacPolicyType 1.3.6.1.4.1.2011.6.139.11.1.18.1.10
This object indicates the UAC policy. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER users(1), channelUtilization(2), unknown(255)  

hwRrmUacClientNumAccessThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..256  

hwRrmUacClientNumRoamThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..256  

hwRrmUacReachThresholdHideSsidSwitch 1.3.6.1.4.1.2011.6.139.11.1.18.1.13
This object indicates the status of the function of hiding the SSID when the value of UAC reaches the specified threshold. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRrmBandSteerDenyThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.14
This object indicates the maximum number of times the band steering function rejects association requests from terminals. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

hwRrmBandSteerLbClientThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.15
This object indicates the minimum number of terminals for triggering inter-band load balancing. The default value is 10..
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..100  

hwRrmBandSteerLbGapThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.16
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwRrmBandSteerClientBandsExpire 1.3.6.1.4.1.2011.6.139.11.1.18.1.17
This object indicates the load difference percentage for triggering inter-band load balancing. The default value is 20.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..300  

hwRrmLoadBalanceSwitch 1.3.6.1.4.1.2011.6.139.11.1.18.1.18
This object indicates the status of the load balancing group function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRrmLoadBalanceClientThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.19
This object indicates the percentage of terminals for triggering load balancing. The default value is 10. It is expressed in percentage.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwRrmLoadBalanceGapThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.20
This object indicates the load difference threshold for triggering load balancing, which is expressed in the number of terminals. The default value is 10.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwRrmLoadBalanceDenyThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.21
This object indicates the maximum number of times the load balancing function rejects association requests from terminals. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

hwRrmSmartRoamCheckType 1.3.6.1.4.1.2011.6.139.11.1.18.1.22
This object indicates whether STA active roaming is triggered by rate check or SNR check.The values are as follows:? 1: checkSnr? 2: checkRate? 3: checkAll.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER checkSnr(1), checkRate(2), checkAll(3)  

hwRrmSmartRoamSwitch 1.3.6.1.4.1.2011.6.139.11.1.18.1.23
This object indicates the status of the smart roaming function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRrmSmartRoamSnrThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.24
This object indicates the SNR threshold for triggering the smart roaming function. The default value is 20 dB.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..75  

hwRrmSmartRoamRateThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.25
This object indicates the rate threshold for triggering the smart roaming function. It is expressed in the percentage against the maximum rate supported by the terminal. The default value is 0. It is expressed in percentage.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwRrmSmartRoamSnrHighLevelMargin 1.3.6.1.4.1.2011.6.139.11.1.18.1.26
This object indicates the upper SNR difference threshold for triggering smart roaming. The default value is 15. It is expressed in dB.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..20  

hwRrmSmartRoamSnrLowLevelMargin 1.3.6.1.4.1.2011.6.139.11.1.18.1.27
This object indicates the lower SNR difference threshold for triggering smart roaming. The default value is 6. It is expressed in dB.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3..15  

hwRrmSmartRoamSnrCheckInterval 1.3.6.1.4.1.2011.6.139.11.1.18.1.28
This object indicates the terminal SNR detection interval for smart roaming. The default value is 3. It is expressed in s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3..30  

hwRrmSmartRoamUnableRoamExpireTime 1.3.6.1.4.1.2011.6.139.11.1.18.1.29
This object indicates the aging time of records that terminals are unable to roam. The default value is 240. It is expressed in minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 30..2880  

hwRrmProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.18.1.30
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwRrmUacChannelUtiAccessThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.31
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwRrmUacChannelUtiRoamThreshold 1.3.6.1.4.1.2011.6.139.11.1.18.1.32
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwRrmSmartRoamQuickKickoffRateThr 1.3.6.1.4.1.2011.6.139.11.1.18.1.33
Smart roam quick-kickoff rate threshold
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwRrmSmartRoamQuickKickoffSnrThr 1.3.6.1.4.1.2011.6.139.11.1.18.1.34
Smart roam quick-kickoff SNR threshold
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..75  

hwAirScanProfileTable 1.3.6.1.4.1.2011.6.139.11.1.19
This table is used to configure air scan intervals, duration, and scan channel sets.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAirScanProfileEntry

hwAirScanProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.19.1
The index of this table is hwAirScanProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAirScanProfileEntry  

hwAirScanProfileName 1.3.6.1.4.1.2011.6.139.11.1.19.1.1
This object indicates the name of an air scan profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAirScanPeriod 1.3.6.1.4.1.2011.6.139.11.1.19.1.2
This object indicates the air scan period. The default value is 60. It is expressed in ms.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..100  

hwAirScanInterval 1.3.6.1.4.1.2011.6.139.11.1.19.1.3
This object indicates the scan interval. The default value is 600. The unit is 0.1s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 300..600000  

hwAirScanChannelSet 1.3.6.1.4.1.2011.6.139.11.1.19.1.4
This object indicates the scan channel set. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER countryChannel(1), dcaChannel(2), workChannel(3)  

hwAirScanProfilRowStatus 1.3.6.1.4.1.2011.6.139.11.1.19.1.5
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAirScanVoiceAware 1.3.6.1.4.1.2011.6.139.11.1.19.1.6
This object indicates the voice aware set. The default value is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAirScanVideoAware 1.3.6.1.4.1.2011.6.139.11.1.19.1.7
This object indicates the video aware set. The default value is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAirScanSwitch 1.3.6.1.4.1.2011.6.139.11.1.19.1.8
This object indicates the scan switch status. The default value is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapProfileTable 1.3.6.1.4.1.2011.6.139.11.1.20
This table is used to configure and query VAP profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVapProfileEntry

hwVapProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.20.1
The index of this table is hwVapProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVapProfileEntry  

hwVapProfileName 1.3.6.1.4.1.2011.6.139.11.1.20.1.1
This object indicates the name of a VAP profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwVapForwardMode 1.3.6.1.4.1.2011.6.139.11.1.20.1.2
This object indicates the service forwarding mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), directForward(2), tunnel(3), softgre(4)  

hwVapTunnelForwardProtocol 1.3.6.1.4.1.2011.6.139.11.1.20.1.3
This object indicates the format of packets forwarded by tunnel. The default value is 0xF.? bit0: dot1x? bit1: http? bit2: wapi? bit3: mdns.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwVapServiceSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.4
This object indicates the status of the VAP service function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapAutoOffStartTime 1.3.6.1.4.1.2011.6.139.11.1.20.1.5
This object indicates the start time of VAP profile. The format is HH:MM:SS.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

hwVapAutoOffEndTime 1.3.6.1.4.1.2011.6.139.11.1.20.1.6
This object indicates the end time of VAP profile. The format is HH:MM:SS.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

hwVapTemporaryManagementSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.7
If this parameter is set to 2, the VAP automatically becomes the management VAP for offline APs after the AP is disconnected. It can still send signals so that maintenance personnel can access it to identify faults (the security mode is the non-authentication security mode and the SSID will be hidden). The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapServiceVlan 1.3.6.1.4.1.2011.6.139.11.1.20.1.8
This object indicates the service VLAN for the VAP. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4094  

hwVapVlanPool 1.3.6.1.4.1.2011.6.139.11.1.20.1.9
This object indicates the VLAN pool to which the VAP is bound.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwVapType 1.3.6.1.4.1.2011.6.139.11.1.20.1.10
This object indicates the VAP type. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER service(1), managementAp(2), managementAc(3)  

hwVapStaAccessMode 1.3.6.1.4.1.2011.6.139.11.1.20.1.11
This object indicates the access mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), blacklist(2), whitelist(3)  

hwVapStaAccessModePorfile 1.3.6.1.4.1.2011.6.139.11.1.20.1.12
This object indicates blacklist and whitelist profiles.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwVapRoamHomeAgent 1.3.6.1.4.1.2011.6.139.11.1.20.1.13
This object indicates the tunnel endpoint for inter-Layer 3 roaming. The default value is 1..
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ap(1), ac(2)  

hwVapRoamVlanMobilityGroup 1.3.6.1.4.1.2011.6.139.11.1.20.1.14
This object indicates the VLAN group for roaming. For the same VLAN, if the VAP is in different VLAN groups for roaming, the roaming is also inter-Layer 3 roaming. The default value is 1..
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4094  

hwVapRoamLayer3Switch 1.3.6.1.4.1.2011.6.139.11.1.20.1.15
This object indicates the status of the Layer 3 roaming function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapBandSteerSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.16
This object indicates the status of the band steering function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapLearnIpv4Address 1.3.6.1.4.1.2011.6.139.11.1.20.1.17
This object indicates the status of the IPv4 address learning function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapLearnIpv6Address 1.3.6.1.4.1.2011.6.139.11.1.20.1.18
This object indicates the status of the IPv6 address learning function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapLearnIpv4AddressStrict 1.3.6.1.4.1.2011.6.139.11.1.20.1.19
This object indicates the status of the strict address learning (only through the DHCP) function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2), enableBlacklist(3)  

hwVapIpBindCheck 1.3.6.1.4.1.2011.6.139.11.1.20.1.20
This object indicates the status of the IP binding relationship check function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapArpBindCheck 1.3.6.1.4.1.2011.6.139.11.1.20.1.21
This object indicates the status of the ARP binding relationship check function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapOptinon82InsertSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.22
This object indicates the status of the function of appending the Option 82 field to DHCP messages. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapOptinon82InsertRidFormat 1.3.6.1.4.1.2011.6.139.11.1.20.1.23
This object indicates the mode to append the Option 82 field to DHCP messages. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER apMac(1), apMacSsid(2), userDefined(3), apName(4), apNameSsid(5)  

hwVapDhcpTrustPort 1.3.6.1.4.1.2011.6.139.11.1.20.1.24
This object indicates the status of the radio interface DHCP trust function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapNdTrustPort 1.3.6.1.4.1.2011.6.139.11.1.20.1.25
This object indicates the status of the radio interface ND trust function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapSecurityProfile 1.3.6.1.4.1.2011.6.139.11.1.20.1.26
The object indicates the security profile that is bound to the VAP. The default value is default.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwVapTrafficProfile 1.3.6.1.4.1.2011.6.139.11.1.20.1.27
The object indicates the traffic profile that is bound to the VAP. The default value is default.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwVapSsidProfile 1.3.6.1.4.1.2011.6.139.11.1.20.1.28
The object indicates the SSID profile that is bound to the VAP. The default value is default.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwVapAuthenticationProfile 1.3.6.1.4.1.2011.6.139.11.1.20.1.29
The object indicates the authentication profile that is bound to the VAP. The default value is default.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwVapSacProfile 1.3.6.1.4.1.2011.6.139.11.1.20.1.30
The object indicates the SAC profile that is bound to the VAP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwVapProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.20.1.31
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwVapUserProfile 1.3.6.1.4.1.2011.6.139.11.1.20.1.32
The object indicates the user profile that is bound to the VAP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwVapHotspot2Profile 1.3.6.1.4.1.2011.6.139.11.1.20.1.33
The object indicates the Hotspot2.0 profile that is bound to the VAP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwSoftgreProfile 1.3.6.1.4.1.2011.6.139.11.1.20.1.34
The object indicates the Softgre profile that is bound to the VAP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwVapOptinon82RidUserDefined 1.3.6.1.4.1.2011.6.139.11.1.20.1.35
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

hwVapOptinon82RidMacFormat 1.3.6.1.4.1.2011.6.139.11.1.20.1.36
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), normal(1), compact(2)  

hwVapOptinon82InsertCidFormat 1.3.6.1.4.1.2011.6.139.11.1.20.1.37
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER apMac(1), apMacSsid(2), userDefined(3), apName(4), apNameSsid(5)  

hwVapOptinon82CidUserDefined 1.3.6.1.4.1.2011.6.139.11.1.20.1.38
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..255)  

hwVapOptinon82CidMacFormat 1.3.6.1.4.1.2011.6.139.11.1.20.1.39
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), normal(1), compact(2)  

hwVapUccProfile 1.3.6.1.4.1.2011.6.139.11.1.20.1.40
The object indicates the UCC profile that is bound to the VAP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwVapAntiAttackBroadcastFloodSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.41
This object indicates the status of the VAP anti-attack braoadcast flood function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapAntiAttackBroadcastFloodStaRateThreshold 1.3.6.1.4.1.2011.6.139.11.1.20.1.42
This object indicates the anti-attack braoadcast flood sta-rate-threshold for the VAP. The default value is 10.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..5000  

hwVapAntiAttackBroadcastFloodBlacklistSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.43
This object indicates the status of the VAP anti-attack braoadcast flood blacklist function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapLearnIpv6AddressStrict 1.3.6.1.4.1.2011.6.139.11.1.20.1.44
This object indicates the status of the strict address learning (only through the DHCPv6) function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2), enableBlacklist(3)  

hwVapAntiAttackARPFloodSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.45
This object indicates the status of the VAP anti-attack ARP flood function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapAntiAttackARPFloodStaRateThreshold 1.3.6.1.4.1.2011.6.139.11.1.20.1.46
This object indicates the anti-attack ARP flood sta-rate-threshold for the VAP. The default value is 5.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..500  

hwVapAntiAttackARPFloodBlacklistSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.47
This object indicates the status of the VAP anti-attack ARP flood blacklist function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapAntiAttackNDFloodSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.48
This object indicates the status of the VAP anti-attack ND flood function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapAntiAttackNDFloodStaRateThreshold 1.3.6.1.4.1.2011.6.139.11.1.20.1.49
This object indicates the anti-attack ND flood sta-rate-threshold for the VAP. The default value is 16.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..500  

hwVapAntiAttackNDFloodBlacklistSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.50
This object indicates the status of the VAP anti-attack ND flood blacklist function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapAntiAttackIGMPFloodSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.51
This object indicates the status of the VAP anti-attack IGMP flood function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapAntiAttackIGMPFloodStaRateThreshold 1.3.6.1.4.1.2011.6.139.11.1.20.1.52
This object indicates the anti-attack IGMP flood sta-rate-threshold for the VAP. The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..500  

hwVapAntiAttackIGMPFloodBlacklistSwitch 1.3.6.1.4.1.2011.6.139.11.1.20.1.53
This object indicates the status of the VAP anti-attack IGMP flood blacklist function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapDefenceProfile 1.3.6.1.4.1.2011.6.139.11.1.20.1.54
The object indicates the Defence profile that is bound to the VAP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwVapTimeRange 1.3.6.1.4.1.2011.6.139.11.1.20.1.55
The object indicates the TimeRange .
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwVapPermitVlanList 1.3.6.1.4.1.2011.6.139.11.1.20.1.56
This object indicates the PermitVlanList. The default value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

hwSsidProfileTable 1.3.6.1.4.1.2011.6.139.11.1.21
This table is used to configure and query SSID profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSsidProfileEntry

hwSsidProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.21.1
The index of this table is hwSsidProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSsidProfileEntry  

hwSsidProfileName 1.3.6.1.4.1.2011.6.139.11.1.21.1.1
This object indicates the name of a VAP profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwSsidText 1.3.6.1.4.1.2011.6.139.11.1.21.1.2
This object indicates the SSID character string. The default value is huawei-default.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwSsidHide 1.3.6.1.4.1.2011.6.139.11.1.21.1.3
This object indicates whether to enable SSID hiding. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSsidAssocTimeout 1.3.6.1.4.1.2011.6.139.11.1.21.1.4
This object indicates the association timeout period of a user. The default value is 5 minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..30  

hwSsidMaxStaNum 1.3.6.1.4.1.2011.6.139.11.1.21.1.5
The object indicates the number of access users on a VAP. The default value is 64.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..256  

hwSsidLegacyStaSwitch 1.3.6.1.4.1.2011.6.139.11.1.21.1.6
This object indicates whether to allow access from legacy terminals. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2), onlyDot11bDisable(3)  

hwSsidDtimInterval 1.3.6.1.4.1.2011.6.139.11.1.21.1.7
This object indicates the DTIM interval. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

hwSsidClientEdcaVoiceECWmax 1.3.6.1.4.1.2011.6.139.11.1.21.1.8
This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VO queue on the station. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwSsidClientEdcaVoiceECWmin 1.3.6.1.4.1.2011.6.139.11.1.21.1.9
This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VO queue on the station. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwSsidClientEdcaVoiceAIFSN 1.3.6.1.4.1.2011.6.139.11.1.21.1.10
This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VO queue on the station. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hwSsidClientEdcaVoiceTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.21.1.11
This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VO queue on the station. The default value is 47.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwSsidClientEdcaVideoECWmax 1.3.6.1.4.1.2011.6.139.11.1.21.1.12
This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VI queue on the station. The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwSsidClientEdcaVideoECWmin 1.3.6.1.4.1.2011.6.139.11.1.21.1.13
This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VI queue on the station. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwSsidClientEdcaVideoAIFSN 1.3.6.1.4.1.2011.6.139.11.1.21.1.14
This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VI queue on the station. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hwSsidClientEdcaVideoTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.21.1.15
This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VI queue on the station. The default value is 94.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwSsidClientEdcaBeECWmax 1.3.6.1.4.1.2011.6.139.11.1.21.1.16
This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BE queue on the station. The default value is 10.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwSsidClientEdcaBeECWmin 1.3.6.1.4.1.2011.6.139.11.1.21.1.17
This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BE queue on the station. The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwSsidClientEdcaBeAIFSN 1.3.6.1.4.1.2011.6.139.11.1.21.1.18
This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BE queue on the station. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hwSsidClientEdcaBeTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.21.1.19
This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BE queue on the station. The default value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwSsidClientEdcaBkECWmax 1.3.6.1.4.1.2011.6.139.11.1.21.1.20
This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BK queue on the station. The default value is 10.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwSsidClientEdcaBkECWmin 1.3.6.1.4.1.2011.6.139.11.1.21.1.21
This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BK queue on the station. The default value is 4.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwSsidClientEdcaBkAIFSN 1.3.6.1.4.1.2011.6.139.11.1.21.1.22
This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BK queue on the station. The default value is 7.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hwSsidClientEdcaBkTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.21.1.23
This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BK queue on the station. The default value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwSsidInboundCarCir 1.3.6.1.4.1.2011.6.139.11.1.21.1.24
This object indicates the inbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSsidInboundCarPir 1.3.6.1.4.1.2011.6.139.11.1.21.1.25
This object indicates the inbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSsidInboundCarCbs 1.3.6.1.4.1.2011.6.139.11.1.21.1.26
This object indicates the inbound committed burst size (CBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSsidInboundCarPbs 1.3.6.1.4.1.2011.6.139.11.1.21.1.27
This object indicates the inbound peak burst size (PBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSsidOutboundCarCir 1.3.6.1.4.1.2011.6.139.11.1.21.1.28
This object indicates the outbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSsidOutboundCarPir 1.3.6.1.4.1.2011.6.139.11.1.21.1.29
This object indicates the outbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSsidOutboundCarCbs 1.3.6.1.4.1.2011.6.139.11.1.21.1.30
This object indicates the outbound committed burst size (CBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSsidOutboundCarPbs 1.3.6.1.4.1.2011.6.139.11.1.21.1.31
This object indicates the outbound peak burst size (PBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4294967295  

hwSsidProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.21.1.32
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwSsidHideWhileReachMaxSta 1.3.6.1.4.1.2011.6.139.11.1.21.1.33
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSsidBeacon2gRate 1.3.6.1.4.1.2011.6.139.11.1.21.1.34
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), five(5), six(6), nine(9), eleven(11), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)  

hwSsidBeacon5gRate 1.3.6.1.4.1.2011.6.139.11.1.21.1.35
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER six(6), nine(9), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)  

hwSsidDenyBroadcastProbe 1.3.6.1.4.1.2011.6.139.11.1.21.1.36
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSsidProbeResponseRetry 1.3.6.1.4.1.2011.6.139.11.1.21.1.37
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

hwSsidUapsd 1.3.6.1.4.1.2011.6.139.11.1.21.1.38
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSsidActiveDullClient 1.3.6.1.4.1.2011.6.139.11.1.21.1.39
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSsidMuMIMOSwitch 1.3.6.1.4.1.2011.6.139.11.1.21.1.40
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSsidProfile80211rEnable 1.3.6.1.4.1.2011.6.139.11.1.21.1.41
This object indicates the switch of 802.11r.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSsidProfile80211rMode 1.3.6.1.4.1.2011.6.139.11.1.21.1.42
This object indicates the mode of 802.11r.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(0), overtheair(1), overtheds(2)  

hwSsidProfile80211rReassociateTimeout 1.3.6.1.4.1.2011.6.139.11.1.21.1.43
This object indicates the reassociate timeout of 802.11r.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..10  

hwSecurityProfileTable 1.3.6.1.4.1.2011.6.139.11.1.22
This table is used to describe the information of a security profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSecurityProfileEntry

hwSecurityProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.22.1
The index of this table is hwSecurityProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSecurityProfileEntry  

hwSecurityProfileName 1.3.6.1.4.1.2011.6.139.11.1.22.1.1
This object indicates the name of a security profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwSecurityPolicy 1.3.6.1.4.1.2011.6.139.11.1.22.1.2
This object indicates the air interface authentication policy. The default value is 8(open).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wapiCert(1), wapiPsk(2), wpaDot1x(3), wpaPsk(4), wpa2Dot1x(5), wpa2Psk(6), wepShareKey(7), open(8), wpaWpa2Psk(9), wpaWpa2Dot1x(10), wepNoauth(11)  

hwSecurityWepEncrypt 1.3.6.1.4.1.2011.6.139.11.1.22.1.3
This object indicates the WEP encryption algorithm. The default value is 4369.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

hwSecurityWepPskMode 1.3.6.1.4.1.2011.6.139.11.1.22.1.4
This object indicates that the WEP PSK mode is PassPhase or Hex. The default value is 4369.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

hwSecurityWepPsk1 1.3.6.1.4.1.2011.6.139.11.1.22.1.5
This object indicates the WEP PSK1.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..68)  

hwSecurityWepPsk2 1.3.6.1.4.1.2011.6.139.11.1.22.1.6
This object indicates the WEP PSK2.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..68)  

hwSecurityWepPsk3 1.3.6.1.4.1.2011.6.139.11.1.22.1.7
This object indicates the WEP PSK3.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..68)  

hwSecurityWepPsk4 1.3.6.1.4.1.2011.6.139.11.1.22.1.8
This object indicates the WEP PSK4.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..68)  

hwSecurityWepDefaultKeyId 1.3.6.1.4.1.2011.6.139.11.1.22.1.9
This object indicates the default key ID for WEP. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4  

hwSecurityWpaEncrypt 1.3.6.1.4.1.2011.6.139.11.1.22.1.10
This object indicates the WPA/WPA2 encryption algorithm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(0), wpaAes(1), wpaTkip(2), wpaAesTkip(3)  

hwSecurityWpaPskMode 1.3.6.1.4.1.2011.6.139.11.1.22.1.11
This object indicates whether the WPA PSK mode is PassPhase or Hex.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pskPassphase(1), pskHex(2)  

hwSecurityWpaPsk 1.3.6.1.4.1.2011.6.139.11.1.22.1.12
This object indicates the WPA/WPA2 PSK.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0|6|8..108)  

hwSecurityWpaPtkUpdateSwitch 1.3.6.1.4.1.2011.6.139.11.1.22.1.13
This object indicates the status of WPA PTK update function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSecurityWpaPtkUpdateInterval 1.3.6.1.4.1.2011.6.139.11.1.22.1.14
This object indicates the WPA PTK update interval. The default value is 43200 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 30..86400  

hwSecurityWapiPskMode 1.3.6.1.4.1.2011.6.139.11.1.22.1.15
This object indicates the WAPI PSK mode. The default value is 1. 1:pskPassphase 2:pskHex.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pskPassphase(1), pskHex(2)  

hwSecurityWapiPsk 1.3.6.1.4.1.2011.6.139.11.1.22.1.16
This object indicates the WAPI PSK.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0|6|8..108)  

hwSecurityWapiAsuIpAddress 1.3.6.1.4.1.2011.6.139.11.1.22.1.17
This object indicates the IP address of the WAPI ASU.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwSecurityWapiIssuerCertFileName 1.3.6.1.4.1.2011.6.139.11.1.22.1.18
This object indicates the certificate file name of the WAPI issuer.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwSecurityWapiAsuCertFileName 1.3.6.1.4.1.2011.6.139.11.1.22.1.19
This object indicate the certificate file name of the WAPI ASU.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwSecurityWapiAcCertFileName 1.3.6.1.4.1.2011.6.139.11.1.22.1.20
This object indicate the certificate file name of the WAPI AC.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwSecurityWapiAcPrvKeyFileName 1.3.6.1.4.1.2011.6.139.11.1.22.1.21
This object indicates the private key file name of the WAPI AC.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwSecurityWapiIssuerPfxPassword 1.3.6.1.4.1.2011.6.139.11.1.22.1.22
This object indicates the WAPI issuer certificate key.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..68)  

hwSecurityWapiAsuPfxPassword 1.3.6.1.4.1.2011.6.139.11.1.22.1.23
This object indicates the WAPI ASU certificate key.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..68)  

hwSecurityWapiAcPfxPassword 1.3.6.1.4.1.2011.6.139.11.1.22.1.24
This object indicates the WAPI AC certificate key.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..68)  

hwSecurityWapiAcPrvKeyPassword 1.3.6.1.4.1.2011.6.139.11.1.22.1.25
This object indicates the key for reading the AC private key file.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..68)  

hwSecurityWapiCertRetransCount 1.3.6.1.4.1.2011.6.139.11.1.22.1.26
This object indicates the number of retransmissions of WAPI certificate authentication packets. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

hwSecurityWapiBkThreshold 1.3.6.1.4.1.2011.6.139.11.1.22.1.27
This object indicates the WAPI BK lifetime percentage. The default value is 70.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwSecurityWapiBkLifetime 1.3.6.1.4.1.2011.6.139.11.1.22.1.28
This object indicates the interval for updating the WAPI BK. The default value is 43200 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 600..604800  

hwSecurityWapiUskUpdateMethod 1.3.6.1.4.1.2011.6.139.11.1.22.1.29
This object indicates the WAPI USK update mode. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), timeBased(2), packetBased(3), timepacketBased(4)  

hwSecurityWapiMskUpdateMethod 1.3.6.1.4.1.2011.6.139.11.1.22.1.30
This object indicates the WAPI MSK update mode. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), timeBased(2), packetBased(3), timepacketBased(4)  

hwSecurityWapiUskUpdateInterval 1.3.6.1.4.1.2011.6.139.11.1.22.1.31
This object indicates the time-based interval for updating the WAPI USK. The default value is 86400 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 600..604800  

hwSecurityWapiUskUpdatePackets 1.3.6.1.4.1.2011.6.139.11.1.22.1.32
This object indicates the number of packets that will trigger WAPI USK update. The default value is 10.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4200000  

hwSecurityWapiUskRetansCount 1.3.6.1.4.1.2011.6.139.11.1.22.1.33
This object indicates the maximum number of retransmissions of a WAPI USK negotiation packet. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

hwSecurityWapiMskUpdateInterval 1.3.6.1.4.1.2011.6.139.11.1.22.1.34
This object indicates the time-based interval for updating the WAPI MSK. The default value is 86400 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 600..604800  

hwSecurityWapiMskUpdatePackets 1.3.6.1.4.1.2011.6.139.11.1.22.1.35
This object indicates the number of packets that will trigger WAPI MSK update. The default value is 10.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4200000  

hwSecurityWapiMskRetansCount 1.3.6.1.4.1.2011.6.139.11.1.22.1.36
This object indicates the maximum number of retransmissions of a WAPI MSK negotiation packet. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

hwSecurityWapiSATimeout 1.3.6.1.4.1.2011.6.139.11.1.22.1.37
This object indicates the timeout period of a WAPI-based security association (SA). The default value is 60 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

hwSecurityPMF 1.3.6.1.4.1.2011.6.139.11.1.22.1.38
This object indicates the status of the PMF function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..3  

hwSecurityProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.22.1.39
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPTrafficProfileTable 1.3.6.1.4.1.2011.6.139.11.1.23
This table is used to configure and query traffic profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPTrafficProfileEntry

hwAPTrafficProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.23.1
The index of this table is hwAPTrafficProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPTrafficProfileEntry  

hwAPTrafficProfileName 1.3.6.1.4.1.2011.6.139.11.1.23.1.1
This object indicates the name of a traffic profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPTrafficProfilePriorityMapDnTrustMode 1.3.6.1.4.1.2011.6.139.11.1.23.1.2
This object indicates the downstream service priority mapping mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER trustDSCP(1), trust8021P(2)  

hwAPTrafficProfilePriorityDscpDnMap80211e 1.3.6.1.4.1.2011.6.139.11.1.23.1.3
This object indicates the mapping relationship between 802.1p priorities of 802.3 packets and user priorities of 802.11 packets when data packets are sent to a downstream AP. DSCP values range from 0 to 63 and 802.11e priorities range from 0 to 7. Two mapped data are separated by a comma.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwAPTrafficProfilePriority80211eUpMapDscp 1.3.6.1.4.1.2011.6.139.11.1.23.1.4
This object indicates the tunnel priority mappings when data packets are sent from APs to an AC. DSCP values range from 0 to 63 and 802.11e priorities range from 0 to 7. Two mapped data are separated by a comma.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwAPTrafficProfileUserIsolate 1.3.6.1.4.1.2011.6.139.11.1.23.1.5
This object indicates the user isolation mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), l3Isolate(2), l2Isolate(3)  

hwAPTrafficProfileRateLimitClientUp 1.3.6.1.4.1.2011.6.139.11.1.23.1.6
This object indicates the STA's uplink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..4294967295  

hwAPTrafficProfileRateLimitClientDn 1.3.6.1.4.1.2011.6.139.11.1.23.1.7
This object indicates the STA's downlink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..4294967295  

hwAPTrafficProfileRateLimitVapUp 1.3.6.1.4.1.2011.6.139.11.1.23.1.8
This object indicates the VAP's uplink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..4294967295  

hwAPTrafficProfileRateLimitVapDn 1.3.6.1.4.1.2011.6.139.11.1.23.1.9
This object indicates the VAP's downlink rate limit. The default value is 0xFFFFFFFF. It is expressed in kbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..4294967295  

hwAPTrafficProfileMldSnooping 1.3.6.1.4.1.2011.6.139.11.1.23.1.10
This object indicates the status of the MLD snooping function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileIGMPSnooping 1.3.6.1.4.1.2011.6.139.11.1.23.1.11
This object indicates the status of the IGMP snooping function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileIGMPSnoopingReportSuppress 1.3.6.1.4.1.2011.6.139.11.1.23.1.12
This object indicates the status of the IGMP snooping report suppression function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileMcToUc 1.3.6.1.4.1.2011.6.139.11.1.23.1.13
This object indicates the status of the function of converting multicast to unicast. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileOptimizeSuppressionBc 1.3.6.1.4.1.2011.6.139.11.1.23.1.14
This object indicates the information about broadcast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..14881000 | 4294967295  

hwAPTrafficProfileOptimizeSuppressionUc 1.3.6.1.4.1.2011.6.139.11.1.23.1.15
This object indicates the information about unknown unicast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..14881000 | 4294967295  

hwAPTrafficProfileOptimizeSuppressionMc 1.3.6.1.4.1.2011.6.139.11.1.23.1.16
This object indicates the information about multicast storm suppression. The unit is pps. The default value is 0xFFFFFFFF, indicating that the broadcast storm suppression is not enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..14881000 | 4294967295  

hwAPTrafficProfileOptimizeTCPAdjustMSS 1.3.6.1.4.1.2011.6.139.11.1.23.1.17
This object indicates the information about the automatic MSS adjustment. The default value is 0xFFFFFFFF, indicating that this function is not enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 128..2048 | 4294967295  

hwAPTrafficProfileOptimizeProxyARP 1.3.6.1.4.1.2011.6.139.11.1.23.1.18
This object indicates the status of the ARP proxy function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileOptimizeProxyND 1.3.6.1.4.1.2011.6.139.11.1.23.1.19
This object indicates the status of the ND proxy function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileOptimizeUcSendARP 1.3.6.1.4.1.2011.6.139.11.1.23.1.20
This object indicates the status of the unicast ARP function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileOptimizeUcSendND 1.3.6.1.4.1.2011.6.139.11.1.23.1.21
This object indicates the status of the unicast ND function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileOptimizeUcSendDHCP 1.3.6.1.4.1.2011.6.139.11.1.23.1.22
This object indicates the status of the unicast DHCP function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileOptimizeBcMcDenyAll 1.3.6.1.4.1.2011.6.139.11.1.23.1.23
After this function is enabled, other multicast packets, except for proxy response packets and multicast packets converted to unicast packets, are discarded. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileOptimizeStaBridgeForward 1.3.6.1.4.1.2011.6.139.11.1.23.1.24
This object indicates the status of the STA bridge forwarding function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.23.1.25
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwAPTrafficProfilePriorityMapUpTrustMode 1.3.6.1.4.1.2011.6.139.11.1.23.1.26
This object indicates the tunnel priority mapping mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER trust80211e(1), trustdscp(2)  

hwAPTrafficProfilePriorityDscpUpMapDscp 1.3.6.1.4.1.2011.6.139.11.1.23.1.27
This object indicates the mapping relationship between DSCP and DSCP. DSCP values range from 0 to 63. Two mapped data are separated by a comma.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwAPTrafficProfileOptimizeBcMcMismatchAct 1.3.6.1.4.1.2011.6.139.11.1.23.1.28
This object indicates the status of the bcmc unicast send mismacth action function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER traverse(1), drop(2)  

hwAPTrafficProfileMcToUcDynamicAdatptive 1.3.6.1.4.1.2011.6.139.11.1.23.1.29
This object indicates the status of the multicast to unicast dynamic adaptive function. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwAPTrafficProfileIGMPSnoopingMaxBandwidth 1.3.6.1.4.1.2011.6.139.11.1.23.1.30
This object indicates the status of the IGMP snooping max bandwidth function. The invalid value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10000000  

hwAPTrafficProfileIGMPSnoopingMaxUser 1.3.6.1.4.1.2011.6.139.11.1.23.1.31
This object indicates the status of the IGMP snooping max user function. The invalid value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1000  

hwAPTrafficProfilePriorityDscpUpMap8021p 1.3.6.1.4.1.2011.6.139.11.1.23.1.32
This object indicates the mapping relationship between DSCP and 802.1p. DSCP values range from 0 to 63. Two mapped data are separated by a comma.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwAPTrafficProfilePriority80211eUpMap8021p 1.3.6.1.4.1.2011.6.139.11.1.23.1.33
This object indicates the mapping relationship between 802.11e and 802.1p. 802.11e values range from 0 to 7. Two mapped data are separated by a comma.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwAPTrafficProfilePriority8021pDnMap80211e 1.3.6.1.4.1.2011.6.139.11.1.23.1.34
This object indicates the mapping relationship between 802.11e and 802.1p. 802.11e values range from 0 to 7. Two mapped data are separated by a comma.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwAPTrafficProfileFilterTable 1.3.6.1.4.1.2011.6.139.11.1.24
This table is used to configure QoS filter information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPTrafficProfileFilterEntry

hwAPTrafficProfileFilterEntry 1.3.6.1.4.1.2011.6.139.11.1.24.1
The indexes of this table are hwAPTrafficProfileName, hwAPTrafficProfileFilterType, and hwAPTrafficProfileFilterDirection.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPTrafficProfileFilterEntry  

hwAPTrafficProfileFilterDirection 1.3.6.1.4.1.2011.6.139.11.1.24.1.1
This object indicates the ACL rule direction for packet filtering in a traffic profile. This parameter has no default value.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

hwAPTrafficProfileFilterType 1.3.6.1.4.1.2011.6.139.11.1.24.1.2
This object indicates the ACL rule type for packet filtering in a traffic profile. This parameter has no default value.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), l2(3)  

hwAPTrafficProfileFilterACLID 1.3.6.1.4.1.2011.6.139.11.1.24.1.3
This object indicates the ACL rule for packet filtering in a traffic profile.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3000..3031 | 4000..4031 | 6000..6031  

hwAPTrafficProfileFilterRowStatus 1.3.6.1.4.1.2011.6.139.11.1.24.1.4
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwWlanVlanPoolTable 1.3.6.1.4.1.2011.6.139.11.1.25
This table is used to configure VLAN pools.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanVlanPoolEntry

hwWlanVlanPoolEntry 1.3.6.1.4.1.2011.6.139.11.1.25.1
The index of this table is hwVlanPoolName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanVlanPoolEntry  

hwVlanPoolName 1.3.6.1.4.1.2011.6.139.11.1.25.1.1
This object indicates the VLAN pool name. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwVlanPoolVlanlist 1.3.6.1.4.1.2011.6.139.11.1.25.1.2
This object indicates the VLAN list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..640)  

hwVlanPoolAssignMethod 1.3.6.1.4.1.2011.6.139.11.1.25.1.3
This object indicates the VLAN pool allocation algorithm. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hash(1), even(2)  

hwVlanPoolRowStatus 1.3.6.1.4.1.2011.6.139.11.1.25.1.4
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanStaWhitelistConfig 1.3.6.1.4.1.2011.6.139.11.1.26
OBJECT IDENTIFIER    

hwWlanStaWhitelistProfileTable 1.3.6.1.4.1.2011.6.139.11.1.26.1
This table is used to create STA whitelist profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanStaWhitelistProfileEntry

hwWlanStaWhitelistProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.26.1.1
The index of this table is hwWlanStaWhitelistProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanStaWhitelistProfileEntry  

hwWlanStaWhitelistProfileName 1.3.6.1.4.1.2011.6.139.11.1.26.1.1.1
This object indicates the name of a STA whitelist profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWlanStaWhitelistProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.26.1.1.2
This object indicates the row status of this table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanStaWhitelistProfileConfigTable 1.3.6.1.4.1.2011.6.139.11.1.26.2
This table is used to configure STA whitelist profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanStaWhitelistProfileConfigEntry

hwWlanStaWhitelistProfileConfigEntry 1.3.6.1.4.1.2011.6.139.11.1.26.2.1
The indexes of this table are hwWlanStaWhitelistProfileName and hwWlanStaWhitelistStaMac.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanStaWhitelistProfileConfigEntry  

hwWlanStaWhitelistStaMac 1.3.6.1.4.1.2011.6.139.11.1.26.2.1.1
This object indicates the whitelist.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWlanStaWhitelistRowStatus 1.3.6.1.4.1.2011.6.139.11.1.26.2.1.2
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanStaWhitelistStaMacDescription 1.3.6.1.4.1.2011.6.139.11.1.26.2.1.3
This object indicates the description of the sta-mac.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

hwWlanStaBlacklistConfig 1.3.6.1.4.1.2011.6.139.11.1.27
OBJECT IDENTIFIER    

hwWlanStaBlacklistProfileTable 1.3.6.1.4.1.2011.6.139.11.1.27.1
This table is used to create STA blacklist profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanStaBlacklistProfileEntry

hwWlanStaBlacklistProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.27.1.1
The index of this table is hwWlanStaBlacklistProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanStaBlacklistProfileEntry  

hwWlanStaBlacklistProfileName 1.3.6.1.4.1.2011.6.139.11.1.27.1.1.1
This object indicates the STA blacklist profile name. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWlanStaBlacklistProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.27.1.1.2
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanStaBlacklistProfileConfigTable 1.3.6.1.4.1.2011.6.139.11.1.27.2
This table is used to configure STA blacklist profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanStaBlacklistProfileConfigEntry

hwWlanStaBlacklistProfileConfigEntry 1.3.6.1.4.1.2011.6.139.11.1.27.2.1
The indexes of this table are hwWlanStaBlacklistProfileName and hwWlanStaBlacklistStaMac.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanStaBlacklistProfileConfigEntry  

hwWlanStaBlacklistStaMac 1.3.6.1.4.1.2011.6.139.11.1.27.2.1.1
This object indicates the blacklist.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWlanStaBlacklistRowStatus 1.3.6.1.4.1.2011.6.139.11.1.27.2.1.2
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanStaBlacklistStaMacDescription 1.3.6.1.4.1.2011.6.139.11.1.27.2.1.3
This object indicates the description of the sta-mac.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

hwWidsProfileTable 1.3.6.1.4.1.2011.6.139.11.1.28
This table is used to configure WIDS classify profiles, WIDS attack profiles, and WIDS contain profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWidsProfileEntry

hwWidsProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.28.1
The index of this table is hwWidsProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWidsProfileEntry  

hwWidsProfileName 1.3.6.1.4.1.2011.6.139.11.1.28.1.1
This object indicates the name of a WIDS profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWidsProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.28.1.5
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWidsDeviceReportInterval 1.3.6.1.4.1.2011.6.139.11.1.28.1.6
This object indicates the device detection reporting interval. The default value is 300 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..3600  

hwWidsDeviceSyncInterval 1.3.6.1.4.1.2011.6.139.11.1.28.1.7
This object indicates the interval for APs to report all device information to an AC. The default value is 360 minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 120..360  

hwWidsSpoofProfile 1.3.6.1.4.1.2011.6.139.11.1.28.1.8
This object indicates the name of a WIDS spoof profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwWidsWhitelistProfile 1.3.6.1.4.1.2011.6.139.11.1.28.1.9
This object indicates the name of a WIDS confident profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwWidsBruteForceDetectInterval 1.3.6.1.4.1.2011.6.139.11.1.28.1.10
This object indicates the interval for brute force attack detection. The default value is 60. It is expressed in s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..120  

hwWidsBruteForceDetectThreshold 1.3.6.1.4.1.2011.6.139.11.1.28.1.11
This object indicates the threshold for the number of brute force attack attempts, namely, the threshold for the number of key negotiation failures within a detection period. If the number of brute-force attack attempts exceeds the threshold, the terminal initiates brute force attacks. The default value is 20.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..100  

hwWidsBruteForceQuietTime 1.3.6.1.4.1.2011.6.139.11.1.28.1.12
This object indicates the quiet period for brute force attack alarm reporting. The default value is 600 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..36000  

hwWidsFloodDetectInterval 1.3.6.1.4.1.2011.6.139.11.1.28.1.13
This object indicates the flood attack detection interval. The default value is 60. It is expressed in s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..120  

hwWidsFloodDetectThreshold 1.3.6.1.4.1.2011.6.139.11.1.28.1.14
This object indicates the threshold for food attack detection. If the number of packets of the same type received within a detection period exceeds the threshold, flood attacks occur. The default value is 300.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1000  

hwWidsFloodQuietTime 1.3.6.1.4.1.2011.6.139.11.1.28.1.15
This object indicates the quiet period for flood attack alarm reporting. The default value is 600 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..36000  

hwWidsWeakIvQuietTime 1.3.6.1.4.1.2011.6.139.11.1.28.1.16
This object indicates the quiet period for weak IV attack alarm reporting. The default value is 600 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..36000  

hwWidsSpoofQuietTime 1.3.6.1.4.1.2011.6.139.11.1.28.1.17
This object indicates the quiet period for spoofing attack alarm reporting. The default value is 600 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..36000  

hwWidsDynamicBlackListSwitch 1.3.6.1.4.1.2011.6.139.11.1.28.1.18
This object indicates the status of the dynamic blacklist function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWidsRogueContainModeBmp 1.3.6.1.4.1.2011.6.139.11.1.28.1.19
This object indicates the bit map of rogue device countering types. The default value is 0.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwWidsStaWhitelistProfile 1.3.6.1.4.1.2011.6.139.11.1.28.1.20
This object indicates the name of a sta whitelist profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwWidsSpoofProfileTable 1.3.6.1.4.1.2011.6.139.11.1.32
This table is used to configure matching rules for spoof APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWidsSpoofProfileEntry

hwWidsSpoofProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.32.1
The indexes of this table are hwWidsSpoofProfileName and hwWidsSpoofSsidRegex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWidsSpoofProfileEntry  

hwWidsSpoofProfileName 1.3.6.1.4.1.2011.6.139.11.1.32.1.1
This object indicates the name of a WIDS spoof profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWidsSpoofSsidRegex 1.3.6.1.4.1.2011.6.139.11.1.32.1.2
This object indicates the matching rules for spoofing SSIDs.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..48)  

hwWidsSpoofProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.32.1.3
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWidsWhitelistProfileMacTable 1.3.6.1.4.1.2011.6.139.11.1.33
This table is used to configure WIDS MAC whitelists.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWidsWhitelistProfileMacEntry

hwWidsWhitelistProfileMacEntry 1.3.6.1.4.1.2011.6.139.11.1.33.1
The index of this table is hwWidsWhitelistProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWidsWhitelistProfileMacEntry  

hwWidsWhitelistProfileName 1.3.6.1.4.1.2011.6.139.11.1.33.1.1
This object indicates the name of a WIDS confident profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWidsWhitelistProfileMac 1.3.6.1.4.1.2011.6.139.11.1.33.1.2
This object indicates the MAC address whitelist.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWidsWhitelistProfileMacRowStatus 1.3.6.1.4.1.2011.6.139.11.1.33.1.3
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWidsWhitelistProfileOuiTable 1.3.6.1.4.1.2011.6.139.11.1.34
This table is used to configure WIDS OUI whitelists.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWidsWhitelistProfileOuiEntry

hwWidsWhitelistProfileOuiEntry 1.3.6.1.4.1.2011.6.139.11.1.34.1
The index of this table is hwWidsWhitelistProfileOui.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWidsWhitelistProfileOuiEntry  

hwWidsWhitelistProfileOui 1.3.6.1.4.1.2011.6.139.11.1.34.1.1
This object indicates the index of the OUI whitelist in the WIDS confident profile. Its format is XX-XX-XX. XX is a hexadecimal number.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

hwWidsWhitelistProfileOuiRowStatus 1.3.6.1.4.1.2011.6.139.11.1.34.1.2
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWidsWhitelistProfileSsidTable 1.3.6.1.4.1.2011.6.139.11.1.35
This table is used to configure WIDS SSID whitelists.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWidsWhitelistProfileSsidEntry

hwWidsWhitelistProfileSsidEntry 1.3.6.1.4.1.2011.6.139.11.1.35.1
The index of this table is hwWidsWhitelistProfileSsid.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWidsWhitelistProfileSsidEntry  

hwWidsWhitelistProfileSsid 1.3.6.1.4.1.2011.6.139.11.1.35.1.1
This object indicates the trusted SSIDs that are case-sensitive.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwWidsWhitelistProfileSsidRowStatus 1.3.6.1.4.1.2011.6.139.11.1.35.1.2
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanMeshProfileTable 1.3.6.1.4.1.2011.6.139.11.1.36
This table is used to configure and query Mesh profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMeshProfileEntry

hwWlanMeshProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.36.1
The index of this table is hwWlanMeshProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMeshProfileEntry  

hwWlanMeshProfileName 1.3.6.1.4.1.2011.6.139.11.1.36.1.1
This object indicates the name of a mesh profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWlanMeshID 1.3.6.1.4.1.2011.6.139.11.1.36.1.2
This object indicates the mesh ID. The value is a string of case-sensitive characters without question marks (and spaces. It cannot begin or end with double quotation marks. The default value is huaweimesh.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwWlanMeshDhcpTrustPort 1.3.6.1.4.1.2011.6.139.11.1.36.1.3
This object indicates whether to enable the DHCP trusted port on an AP. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanMeshLinkReportInterval 1.3.6.1.4.1.2011.6.139.11.1.36.1.4
This object indicates the interval for reporting mesh link information. The default value is 30 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..3600  

hwWlanMeshMaxLinkNum 1.3.6.1.4.1.2011.6.139.11.1.36.1.5
In FWA mode, the maximum number of Mesh links supported is 32,otherwise, it is 8
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..32  

hwWlanMeshRssiThreshold 1.3.6.1.4.1.2011.6.139.11.1.36.1.6
This object indicates the valid RSSI threshold for a Mesh link route. The default value is -75 dBm.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -90..-20  

hwWlanMeshSecurityProfileName 1.3.6.1.4.1.2011.6.139.11.1.36.1.8
The object indicates the bound security profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWlanMeshProfileHandoverProfileName 1.3.6.1.4.1.2011.6.139.11.1.36.1.9
The object indicates the bound handover profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwWlanMeshFwaSwitch 1.3.6.1.4.1.2011.6.139.11.1.36.1.10
This object indicates the status of the FWA mode function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanMeshFwaEdcaMode 1.3.6.1.4.1.2011.6.139.11.1.36.1.11
This object indicates the EDCA mode in FWA mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

hwWlanMeshProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.36.1.12
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanMeshClientEdcaVoiceECWmax 1.3.6.1.4.1.2011.6.139.11.1.36.1.13
This object indicates the exponent form of the maximum contention window (ECWmax) for AC_VO packets. ECWmin and ECWmax determine the average backoff time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwWlanMeshClientEdcaVoiceECWmin 1.3.6.1.4.1.2011.6.139.11.1.36.1.14
This object indicates the exponent form of the minimum contention window (ECWmin) for AC_VO packets. ECWmin and ECWmax determine the average backoff time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwWlanMeshClientEdcaVoiceAIFSN 1.3.6.1.4.1.2011.6.139.11.1.36.1.15
This object indicates the AIFSN for AC_VO packets, which determines the channel idle time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hwWlanMeshClientEdcaVoiceTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.36.1.16
This object indicates the transmission opportunity limit (TXOPLimit) for AC_VO packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwWlanMeshClientEdcaVideoECWmax 1.3.6.1.4.1.2011.6.139.11.1.36.1.17
This object indicates the exponent form of the maximum contention window (ECWmax) for AC_VI packets. ECWmin and ECWmax determine the average backoff time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwWlanMeshClientEdcaVideoECWmin 1.3.6.1.4.1.2011.6.139.11.1.36.1.18
This object indicates the exponent form of the minimum contention window (ECWmin) for AC_VI packets. ECWmin and ECWmax determine the average backoff time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwWlanMeshClientEdcaVideoAIFSN 1.3.6.1.4.1.2011.6.139.11.1.36.1.19
This object indicates the AIFSN for AC_VI packets, which determines the channel idle time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hwWlanMeshClientEdcaVideoTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.36.1.20
This object indicates the transmission opportunity limit (TXOPLimit) for AC_VI packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwWlanMeshClientEdcaBeECWmax 1.3.6.1.4.1.2011.6.139.11.1.36.1.21
This object indicates the exponent form of the maximum contention window (ECWmax) for AC_BE packets. ECWmin and ECWmax determine the average backoff time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwWlanMeshClientEdcaBeECWmin 1.3.6.1.4.1.2011.6.139.11.1.36.1.22
This object indicates the exponent form of the minimum contention window (ECWmin) for AC_BE packets. ECWmin and ECWmax determine the average backoff time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwWlanMeshClientEdcaBeAIFSN 1.3.6.1.4.1.2011.6.139.11.1.36.1.23
This object indicates the AIFSN for AC_BE packets, which determines the channel idle time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hwWlanMeshClientEdcaBeTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.36.1.24
This object indicates the transmission opportunity limit (TXOPLimit) for AC_BE packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwWlanMeshClientEdcaBkECWmax 1.3.6.1.4.1.2011.6.139.11.1.36.1.25
This object indicates the exponent form of the maximum contention window (ECWmax) for AC_BK packets. ECWmin and ECWmax determine the average backoff time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwWlanMeshClientEdcaBkECWmin 1.3.6.1.4.1.2011.6.139.11.1.36.1.26
This object indicates the exponent form of the minimum contention window (ECWmin) for AC_BK packets. ECWmin and ECWmax determine the average backoff time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..15  

hwWlanMeshClientEdcaBkAIFSN 1.3.6.1.4.1.2011.6.139.11.1.36.1.27
This object indicates the AIFSN for AC_BK packets, which determines the channel idle time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..15  

hwWlanMeshClientEdcaBkTXOPLimit 1.3.6.1.4.1.2011.6.139.11.1.36.1.28
This object indicates the transmission opportunity limit (TXOPLimit) for AC_BK packets, which determines the maximum duration in which an STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwWlanMeshNdTrustPort 1.3.6.1.4.1.2011.6.139.11.1.36.1.29
This object indicates whether to enable the ND trusted port on an AP. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanMeshLinkAgingTime 1.3.6.1.4.1.2011.6.139.11.1.36.1.30
This object indicates the mesh aging time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..60  

hwWlanMeshProfilePriorityMapTrustMode 1.3.6.1.4.1.2011.6.139.11.1.36.1.31
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER trustDSCP(1), trust8021P(2)  

hwWlanMeshProfilePriorityDscpMap80211e 1.3.6.1.4.1.2011.6.139.11.1.36.1.32
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwWlanMeshProfileClientModeSwitch 1.3.6.1.4.1.2011.6.139.11.1.36.1.33
This object indicates the status of the Mesh client mode function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanMeshProfileBeacon2gRate 1.3.6.1.4.1.2011.6.139.11.1.36.1.34
This object indicates the mesh 2g beacon rate. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), five(5), six(6), nine(9), eleven(11), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)  

hwWlanMeshProfileBeacon5gRate 1.3.6.1.4.1.2011.6.139.11.1.36.1.35
This object indicates the mesh 5g beacon rate. The default value is 6.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER six(6), nine(9), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)  

hwWlanMeshWhitelistProfileTable 1.3.6.1.4.1.2011.6.139.11.1.37
This table describes the Mesh whitelist profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMeshWhitelistProfileEntry

hwWlanMeshWhitelistProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.37.1
The index of this table is hwWlanMeshWhitelistProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMeshWhitelistProfileEntry  

hwWlanMeshWhitelistProfileName 1.3.6.1.4.1.2011.6.139.11.1.37.1.1
This object indicates the name of a mesh profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWlanMeshWhitelistProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.37.1.2
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanMeshWhitelistProfileConfigTable 1.3.6.1.4.1.2011.6.139.11.1.38
This table describes Mesh whitelists in the Mesh whitelist profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMeshWhitelistProfileConfigEntry

hwWlanMeshWhitelistProfileConfigEntry 1.3.6.1.4.1.2011.6.139.11.1.38.1
Indexes of this table are hwWlanMeshWhitelistProfileName and hwWlanMeshWhitelistPeerApMac.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMeshWhitelistProfileConfigEntry  

hwWlanMeshWhitelistPeerApMac 1.3.6.1.4.1.2011.6.139.11.1.38.1.1
This object indicates the whitelist.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWlanMeshWhitelistRowStatus 1.3.6.1.4.1.2011.6.139.11.1.38.1.2
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanMeshHandoverProfileTable 1.3.6.1.4.1.2011.6.139.11.1.39
This table is used to configure and query Mesh handover profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMeshHandoverProfileEntry

hwWlanMeshHandoverProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.39.1
The index of this table is hwWlanMeshHandoverProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMeshHandoverProfileEntry  

hwWlanMeshHandoverProfileName 1.3.6.1.4.1.2011.6.139.11.1.39.1.1
This object indicates the name of a mesh profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWlanMeshHOLinkProbeInterval 1.3.6.1.4.1.2011.6.139.11.1.39.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 50..6000  

hwWlanMeshHOMinRssiThreshold 1.3.6.1.4.1.2011.6.139.11.1.39.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -90..-20  

hwWlanMeshHOMaxRssiThreshold 1.3.6.1.4.1.2011.6.139.11.1.39.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -90..0  

hwWlanMeshHOLinkHoldPeriod 1.3.6.1.4.1.2011.6.139.11.1.39.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1000..60000  

hwWlanMeshHORssiMargin 1.3.6.1.4.1.2011.6.139.11.1.39.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..70  

hwWlanMeshHOLocationBasedAlgorithmEnable 1.3.6.1.4.1.2011.6.139.11.1.39.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanMeshHOMovingDirection 1.3.6.1.4.1.2011.6.139.11.1.39.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER forward(1), backward(2), undetermined(3)  

hwWlanMeshHOPNCriteriaObserveTime 1.3.6.1.4.1.2011.6.139.11.1.39.1.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

hwWlanMeshHOPNCriteriaQualifyTime 1.3.6.1.4.1.2011.6.139.11.1.39.1.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

hwWlanMeshUrgentHandoverLowRateThreshold 1.3.6.1.4.1.2011.6.139.11.1.39.1.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1300  

hwWlanMeshUrgentHandoverLowRatePeriod 1.3.6.1.4.1.2011.6.139.11.1.39.1.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10000  

hwWlanMeshUrgentHandoverPunishmentPeriod 1.3.6.1.4.1.2011.6.139.11.1.39.1.13
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..10000  

hwWlanMeshUrgentHandoverPunishmentRssi 1.3.6.1.4.1.2011.6.139.11.1.39.1.14
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..50  

hwWlanMeshHandoverProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.39.1.15
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWdsProfileTable 1.3.6.1.4.1.2011.6.139.11.1.40
This table is used to configure and query WDS profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWdsProfileEntry

hwWdsProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.40.1
The index of this table is hwWdsProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWdsProfileEntry  

hwWdsProfileName 1.3.6.1.4.1.2011.6.139.11.1.40.1.1
This object indicates the name of a WDS profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWdsName 1.3.6.1.4.1.2011.6.139.11.1.40.1.2
This object indicates the WDS identifier. The value is a string of case-sensitive characters without question marks and spaces. It cannot begin or end with double quotation marks. The default value is huaweiwds.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwWdsMode 1.3.6.1.4.1.2011.6.139.11.1.40.1.3
This object indicates the mode of the WDS. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER middle(1), root(2), leaf(3)  

hwWdsDhcpTrustPort 1.3.6.1.4.1.2011.6.139.11.1.40.1.4
This object indicates whether to enable the DHCP trusted port on an AP. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWdsVlanTagged 1.3.6.1.4.1.2011.6.139.11.1.40.1.5
This object indicates the tagged VLAN in a bridge profile. It is used to add one or a group of VLANs to the WDS bridge profile in tagged mode. By default, no VLAN is configured in the WDS bridge profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWdsSecurityProfileName 1.3.6.1.4.1.2011.6.139.11.1.40.1.6
The object indicates the bound security profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWdsProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.40.1.8
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefined ROWSTATUS_ACTIVE: active ROWSTATUS_NOTINSERVICE: notInService ROWSTATUS_NOTREADY: notReady ROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroy
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWdsNdTrustPort 1.3.6.1.4.1.2011.6.139.11.1.40.1.9
This object indicates whether to enable the ND trusted port on an AP. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWdsProfilePriorityMapTrustMode 1.3.6.1.4.1.2011.6.139.11.1.40.1.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER trustDSCP(1), trust8021P(2)  

hwWdsProfilePriorityDscpMap80211e 1.3.6.1.4.1.2011.6.139.11.1.40.1.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwWdsMuMIMOSwitch 1.3.6.1.4.1.2011.6.139.11.1.40.1.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWdsProfileBeacon2gRate 1.3.6.1.4.1.2011.6.139.11.1.40.1.13
This object indicates the wds 2g beacon rate. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), five(5), six(6), nine(9), eleven(11), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)  

hwWdsProfileBeacon5gRate 1.3.6.1.4.1.2011.6.139.11.1.40.1.14
This object indicates the wds 5g beacon rate. The default value is 6.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER six(6), nine(9), twelve(12), eighteen(18), twentyfour(24), thirtysix(36), fortyeight(48), fiftyfour(54)  

hwWdsWhitelistProfileTable 1.3.6.1.4.1.2011.6.139.11.1.41
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWdsWhitelistProfileEntry

hwWdsWhitelistProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.41.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWdsWhitelistProfileEntry  

hwWdsWhitelistProfileName 1.3.6.1.4.1.2011.6.139.11.1.41.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWdsWhitelistProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.41.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWdsWhitelistTable 1.3.6.1.4.1.2011.6.139.11.1.42
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWdsWhitelistEntry

hwWdsWhitelistEntry 1.3.6.1.4.1.2011.6.139.11.1.42.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWdsWhitelistEntry  

hwWdsWhitelistPeerApMac 1.3.6.1.4.1.2011.6.139.11.1.42.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwWdsWhitelistRowStatus 1.3.6.1.4.1.2011.6.139.11.1.42.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwLocationProfileTable 1.3.6.1.4.1.2011.6.139.11.1.43
This table is used to configure terminal location and tag location.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwLocationProfileEntry

hwLocationProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.43.1
The index of this table is hwLocationProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwLocationProfileEntry  

hwLocationProfileName 1.3.6.1.4.1.2011.6.139.11.1.43.1.1
This object indicates the name of a location profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwLocationAeroscoutTagSwitch 1.3.6.1.4.1.2011.6.139.11.1.43.1.2
This object indicates the status of the AeroScout tag location function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwLocationAeroscoutMuSwitch 1.3.6.1.4.1.2011.6.139.11.1.43.1.3
This object indicates the status of the AeroScout MU location function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwLocationAeroscoutServerPort 1.3.6.1.4.1.2011.6.139.11.1.43.1.4
This object indicates the port used by APs or ACs to report AeroScout location data to the AE server.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1025..65535  

hwLocationAeroscoutViaACSwitch 1.3.6.1.4.1.2011.6.139.11.1.43.1.5
This object indicates whether AeroScout tag location data is reported to the AC. This parameter has no default value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwLocationAeroscoutViaACPort 1.3.6.1.4.1.2011.6.139.11.1.43.1.6
This object indicates that AeroScout location data is reported to the AC that forwards the data to the AE. A port is configured for the AP to report location data to the AC.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwLocationAeroscoutCompoundTime 1.3.6.1.4.1.2011.6.139.11.1.43.1.7
This object indicates the AerosScout location data compound time. The value 0 indicates that data is not compounded and the AP reports location data in real time. The default value is 65535 and the unit is 0.1s.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

hwLocationEkahauTagEnable 1.3.6.1.4.1.2011.6.139.11.1.43.1.8
This object indicates the status of the Ekahau tag location function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwLocationEkahauServerIPAddress 1.3.6.1.4.1.2011.6.139.11.1.43.1.9
This object indicates the IP address of the location server for Ekahau tag location.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwLocationEkahauServerIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.43.1.10
This object indicates the IPv6 address of the location server for Ekahau tag location.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwLocationEkahauServerPort 1.3.6.1.4.1.2011.6.139.11.1.43.1.11
This object indicates the port number of the location server for Ekahau tag location.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1025..65535  

hwLocationEkahauViaACEnable 1.3.6.1.4.1.2011.6.139.11.1.43.1.12
This object indicates whether Ekahau tag location data is reported to the AC.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwLocationEkahauViaACPort 1.3.6.1.4.1.2011.6.139.11.1.43.1.13
This object indicates that Ekahau location data is reported to the AC that forwards the data to the AE. A port is configured for the AP to report location data to the AC.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1025..65535  

hwLocationSourceIPAddress 1.3.6.1.4.1.2011.6.139.11.1.43.1.14
This object indicates the source IPv4 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwLocationSourceIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.43.1.15
This object indicates the source IPv6 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwLocationPrivateMuEnable 1.3.6.1.4.1.2011.6.139.11.1.43.1.16
This object indicates the status of the Huawei proprietary terminal location function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwLocationPrivateServerIPAddress 1.3.6.1.4.1.2011.6.139.11.1.43.1.17
This object indicates the IP address of the server for the Huawei proprietary location function.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwLocationPrivateServerIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.43.1.18
This object indicates the IPv6 address of the server for the Huawei proprietary location function.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwLocationPrivateServerPort 1.3.6.1.4.1.2011.6.139.11.1.43.1.19
This object indicates the port number of the server for the Huawei proprietary location function.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 5000..65535  

hwLocationPrivateViaACEnable 1.3.6.1.4.1.2011.6.139.11.1.43.1.20
This object indicates whether Huawei proprietary terminal location data is reported to the AC. The default value is 2.1: Enable2: Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwLocationPrivateViaACPort 1.3.6.1.4.1.2011.6.139.11.1.43.1.21
This object indicates that Huawei proprietary terminal location data is reported to the AC that forwards the data to the location server. A port is configured for the AP to report location data to the AC. The default destination IP address and port number to which the AP reports terminal location data is the AC's IP address and 6411 respectively.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 5000..65535  

hwLocationPrivateReportFrequency 1.3.6.1.4.1.2011.6.139.11.1.43.1.22
This object indicates the interval for the AP to report location data in Huawei proprietary terminal location mode. The default value is 20000 ms.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 500..60000  

hwLocationProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.43.1.23
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefinedROWSTATUS_ACTIVE: activeROWSTATUS_NOTINSERVICE: notInServiceROWSTATUS_NOTREADY: notReadyROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroy
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwHotspot2ProfileTable 1.3.6.1.4.1.2011.6.139.11.1.45
This table is used to configure and query Hotspot2.0 profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwHotspot2ProfileEntry

hwHotspot2ProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.45.1
The index of this table is hwHotspot2ProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwHotspot2ProfileEntry  

hwHotspot2ProfileName 1.3.6.1.4.1.2011.6.139.11.1.45.1.1
This object indicates the name of a Hotspot2.0 profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwHotspot2NetworkType 1.3.6.1.4.1.2011.6.139.11.1.45.1.2
This object indicates that the network type is an interworking information element. This configuration is mandatory. The AP adds this information to Beacon and Probe Response packets, which indicates network types, to assist users in discovering and selecting networks. The default value is 15.0: Private-network1: private-guest2: public-chargeable3: public-free4: personal-device5: emergency-service14: Test15: Wildcard
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1 | 2..3 | 4..5 | 14..15  

hwHotspot2InternetAccess 1.3.6.1.4.1.2011.6.139.11.1.45.1.3
This object indicates that the Internet attribute is an interworking information element. This configuration is mandatory. The AP adds this information to Beacon and Probe Response packets, which indicates whether users are allowed to access the Internet, to assist users in discovering and selecting networks. The default value is 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER allowAcess(1), unallowedAcess(2)  

hwHotspot2VenueGroupCode 1.3.6.1.4.1.2011.6.139.11.1.45.1.4
For details, see Table 7-25m-Venue Group codes and descriptions in the 802.11u protocol. The default value 0xFFFFFFFF indicates that no configuration is added.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255 | 4294967295  

hwHotspot2VenueTypeCode 1.3.6.1.4.1.2011.6.139.11.1.45.1.5
For details, see Table 7-25n-Venue Type assignments in the 802.11u protocol. The default value 0xFFFFFFFF indicates that no configuration is added.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255 | 4294967295  

hwHotspot2Hessid 1.3.6.1.4.1.2011.6.139.11.1.45.1.6
This object indicates the HESSID of a hot spot network. The default value is null, indicating that no configuration is added.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwHotspot2IPv4AddressAvail 1.3.6.1.4.1.2011.6.139.11.1.45.1.7
This object indicates available types of IPv4 addresses. 8 to 63 are reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Address type not available.1: Public IPv4 address available,2: Port-restricted IPv4 address available,3: Single NATed private IPv4 address available,4: Double NATed private IPv4 address available,5: Port-restricted IPv4 address and single NATed IPv4 address available,6: Port-restricted IPv4 address and double NATed IPv4 address available,7: Availability of the address type is not known,8 to 63: Reserved
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7 | 4294967295  

hwHotspot2IPv6AddressAvail 1.3.6.1.4.1.2011.6.139.11.1.45.1.8
This object indicates available types of IPv4 addresses. 3 is reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Address type not available1: Address type available2: Availability of the address type not known3: Reserved
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..2 | 4294967295  

hwHotspot2NetworkAuthenType 1.3.6.1.4.1.2011.6.139.11.1.45.1.9
This object indicates the network authentication type. 4 to 255 are reserved. The default value 0xFFFFFFFF indicates that no configuration is added.0: Acceptance of terms and conditions.1: On-line enrollment supported,2: http/https redirection,3: DNS redirection,4 to 255: Reserved
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3 | 4294967295  

hwHotspot2RedirectUrl 1.3.6.1.4.1.2011.6.139.11.1.45.1.10
This object indicates the redirection URL.This parameter is optional when Network Authentication Type is set to acceptance.This parameter is mandatory when Network Authentication Type is set to http-https-redirection.This parameter is not configurable when Network Authentication Type is set to other values.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwHotspot2CarryP2PCrossConnectInfo 1.3.6.1.4.1.2011.6.139.11.1.45.1.11
This object indicates whether hot spot networks allow P2P devices to set up cross connections. Currently, this function is not supported. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwHotspot2CellularNetworkProfile 1.3.6.1.4.1.2011.6.139.11.1.45.1.12
This object indicates the bound cellular network profile. By default, no cellular network profile is bound.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwHotspot2ConnectionCapabilityProfile 1.3.6.1.4.1.2011.6.139.11.1.45.1.13
This object indicates the bound connection capability profile. By default, no connection capability profile is bound.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwHotspot2OperatorNameProfile 1.3.6.1.4.1.2011.6.139.11.1.45.1.14
This object indicates the bound operator name profile. By default, no operator name profile is bound.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwHotspot2OperatingClassProfile 1.3.6.1.4.1.2011.6.139.11.1.45.1.15
This object indicates the bound operating class profile. By default, no operating class profile is bound.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwHotspot2OperatorDomainProfile 1.3.6.1.4.1.2011.6.139.11.1.45.1.16
This object indicates the bound operator domain profile. By default, no operator domain profile is bound.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwHotspot2NaiRealmProfile 1.3.6.1.4.1.2011.6.139.11.1.45.1.17
This object indicates the bound NAI realm profile. By default, no NAI realm profile is bound.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwHotspot2VenueNameProfile 1.3.6.1.4.1.2011.6.139.11.1.45.1.18
This object indicates the bound venue name profile. By default, no venue name profile is bound.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwHotspot2RoamingConsortiumProfile 1.3.6.1.4.1.2011.6.139.11.1.45.1.19
This object indicates the bound roaming consortium profile. By default, no roaming consortium profile is bound.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwHotspot2ProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.45.1.20
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.ROWSTATUS_UNDEFINED: undefinedROWSTATUS_ACTIVE: activeROWSTATUS_NOTINSERVICE: notInServiceROWSTATUS_NOTREADY: notReadyROWSTATUS_CREATEANDFLOW: createAndGoROWSTATUS_CREATEANDWAIT: createAndWaitROWSTATUS_DESTROY: destroy
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwCellularNetworkProfileTable 1.3.6.1.4.1.2011.6.139.11.1.46
This table is used to configure and query cellular network profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwCellularNetworkProfileEntry

hwCellularNetworkProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.46.1
The index of this table is hwCellularNetworkProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwCellularNetworkProfileEntry  

hwCellularNetworkProfileName 1.3.6.1.4.1.2011.6.139.11.1.46.1.1
This object indicates the name of a cellular network profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwCellularNetworkProfilePlmnIDList 1.3.6.1.4.1.2011.6.139.11.1.46.1.2
NOTE By default, no configuration is added.PLMNs are separated by question marks (?).A maximum of 32 PLMNs can be configured.A PLMN is a 5-digit or 6-digit numeric string.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwCellularNetworkProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.46.1.3
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwConnectionCapabilityProfileTable 1.3.6.1.4.1.2011.6.139.11.1.47
This table is used to configure and query connection capability profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwConnectionCapabilityProfileEntry

hwConnectionCapabilityProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.47.1
The index of this table is hwConnectionCapabilityProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwConnectionCapabilityProfileEntry  

hwConnectionCapabilityProfileName 1.3.6.1.4.1.2011.6.139.11.1.47.1.1
This object indicates the name of a connection capability profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwConnectionCapabilityEsp 1.3.6.1.4.1.2011.6.139.11.1.47.1.2
This object indicates whether ESP is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityIcmp 1.3.6.1.4.1.2011.6.139.11.1.47.1.3
This object indicates whether ICMP is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityTcpFtp 1.3.6.1.4.1.2011.6.139.11.1.47.1.4
This object indicates whether FTP(TCP) is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityTcpHttp 1.3.6.1.4.1.2011.6.139.11.1.47.1.5
This object indicates whether HTTP (port 80) is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityTcpPptpVpn 1.3.6.1.4.1.2011.6.139.11.1.47.1.6
This object indicates whether PPTP for VPN services (port 1723) is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityTcpSsh 1.3.6.1.4.1.2011.6.139.11.1.47.1.7
This object indicates whether SSH is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityTcpTlsVpn 1.3.6.1.4.1.2011.6.139.11.1.47.1.8
This object indicates whether TLS VPN (port 443) is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityTcpVoip 1.3.6.1.4.1.2011.6.139.11.1.47.1.9
This object indicates whether VoIP (port 5060) is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityUdpIke2Port4500 1.3.6.1.4.1.2011.6.139.11.1.47.1.10
This object indicates whether IKEv2 (port 4500) is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityUdpIke2Port500 1.3.6.1.4.1.2011.6.139.11.1.47.1.11
This object indicates whether IKEv2 (port 500) is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityUdpVoip 1.3.6.1.4.1.2011.6.139.11.1.47.1.12
This object indicates whether VoIP (port 5060) is supported. The default value is unknown(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(1), on(2), off(3)  

hwConnectionCapabilityProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.47.1.13
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwOperatorNameProfileTable 1.3.6.1.4.1.2011.6.139.11.1.48
This table is used to configure and query operator name profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwOperatorNameProfileEntry

hwOperatorNameProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.48.1
The index of this table is hwOperatorNameProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwOperatorNameProfileEntry  

hwOperatorNameProfileName 1.3.6.1.4.1.2011.6.139.11.1.48.1.1
This object indicates the name of an operator name profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwOperatorNameLanguageCodeList 1.3.6.1.4.1.2011.6.139.11.1.48.1.2
A value of LanguageCode indicates a language. It is a string of 2-3 characters. chi/zho/zh indicates Chinese and eng/en indicates English. NOTE By default, no configuration is added.Values of LanguageCode are separated by question marks (?).A maximum of 32 LanguageCode values can be configured.A LanguageCode value must match a FriendlyName value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

hwOperatorFriendlyNameList 1.3.6.1.4.1.2011.6.139.11.1.48.1.3
NOTE By default, no configuration is added.A FriendlyName value is a string of 1-32 characters. FriendlyName values are separated by question marks (?).A maximum of 32 FriendlyName values can be configured.A LanguageCode value must match a FriendlyName value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..2048)  

hwOperatorNameProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.48.1.4
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwOperatorClassProfileTable 1.3.6.1.4.1.2011.6.139.11.1.49
This table is used to configure operating class profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwOperatorClassProfileEntry

hwOperatorClassProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.49.1
The index of this table is hwOperatorClassProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwOperatorClassProfileEntry  

hwOperatorClassProfileName 1.3.6.1.4.1.2011.6.139.11.1.49.1.1
This object indicates the name of an operating class profile profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwOperatorClassIndicationList 1.3.6.1.4.1.2011.6.139.11.1.49.1.2
NOTE By default, no configuration is added.A value of OperatorClassIndication is an integer that ranges from 1 to 255.A maximum of 32 OperatorClassIndication values can be configured.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

hwOperatorClassProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.49.1.3
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwOperatorDomainNameProfileTable 1.3.6.1.4.1.2011.6.139.11.1.50
This table is used to configure and query operator domain profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwOperatorDomainNameProfileEntry

hwOperatorDomainNameProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.50.1
The index of this table is hwOperatorDomainNameProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwOperatorDomainNameProfileEntry  

hwOperatorDomainNameProfileName 1.3.6.1.4.1.2011.6.139.11.1.50.1.1
This object indicates the name of an operating class profile profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwOperatorDomainNameList 1.3.6.1.4.1.2011.6.139.11.1.50.1.2
NOTE By default, no configuration is added.A DomainName value is a string of 1-64 characters in compliance with RFC1035.DomainName values are separated by question marks (?).A maximum of 32 DomainName values can be configured.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..2048)  

hwOperatorDomainNameProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.50.1.3
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwNAIRealmProfileTable 1.3.6.1.4.1.2011.6.139.11.1.51
This table is used to configure and query NAI realm profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwNAIRealmProfileEntry

hwNAIRealmProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.51.1
Indexes of this table are hwNAIRealmProfileName, hwNAIRealmName, hwNAIRealmEapMethodType, and hwNAIRealmEapAuthenID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwNAIRealmProfileEntry  

hwNAIRealmProfileName 1.3.6.1.4.1.2011.6.139.11.1.51.1.1
This object indicates the name of a NAI realm profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwNAIRealmName 1.3.6.1.4.1.2011.6.139.11.1.51.1.2
This object indicates a network identifier.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..63)  

hwNAIRealmEapMethodType 1.3.6.1.4.1.2011.6.139.11.1.51.1.3
This object indicates the authorization type. The default value is 0xffffffff that indicates that the following four types are supported: EAP_AKA, EAP_SIM, EAP_TLS, and EAP_TTLS.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..255 | 4294967295  

hwNAIRealmEapAuthenID 1.3.6.1.4.1.2011.6.139.11.1.51.1.4
This object indicates the authorization ID. The default value is 0xffffffff that indicates that all IDs within the value range are supported.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..255 | 4294967295  

hwNAIRealmEapAuthenPara 1.3.6.1.4.1.2011.6.139.11.1.51.1.5
This object indicate authorization parameter. The default value is 0xffffffff that indicates all parameters within the value range are supported.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255 | 4294967295  

hwNAIRealmProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.51.1.6
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwVenueNameProfileTable 1.3.6.1.4.1.2011.6.139.11.1.52
This table is used to configure and query venue name profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVenueNameProfileEntry

hwVenueNameProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.52.1
The index of this table is hwVenueNameProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVenueNameProfileEntry  

hwVenueNameProfileName 1.3.6.1.4.1.2011.6.139.11.1.52.1.1
This object indicates the name of a venue name profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwVenueNameLanguageCodeList 1.3.6.1.4.1.2011.6.139.11.1.52.1.2
A value of LanguageCode indicates a language. It is a string of 2-3 characters. For details about GUI value ranges, see ISO 639 on the Codes for the Representation of Names of Languages page. The path is http://www.loc.gov/standards/iso639-2/php/ code_list.php. chi/zho/zh indicates Chinese and eng/en indicates English. NOTE By default, no configuration is added.Values of LanguageCode are separated by question marks (?).A maximum of 32 LanguageCode values can be configured.A LanguageCode value must match a VenueName value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

hwVenueNameList 1.3.6.1.4.1.2011.6.139.11.1.52.1.3
If the language-code is set to eng, the name is a string of characters. Rules are the same as those for SSIDs. When it is set to other values, the venue-name is set to a hexadecimal UTF-8 code because current WLANs support English only, for example, venue-name language-code ZHO name 025AB1472568. NOTE By default, no configuration is added.A venue-name value cannot exceed 32 characters.venue-name values are separated by question marks (?).A LanguageCode value must match a VenueName value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..2048)  

hwVenueNameProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.52.1.4
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwRoamingConsortiumProfileTable 1.3.6.1.4.1.2011.6.139.11.1.53
This table is used to configure and query roaming consortium profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRoamingConsortiumProfileEntry

hwRoamingConsortiumProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.53.1
The index of this table is hwRoamingConsortiumProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRoamingConsortiumProfileEntry  

hwRoamingConsortiumProfileName 1.3.6.1.4.1.2011.6.139.11.1.53.1.1
This object indicates the name of a roaming consortium profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwRoamingConsortiumOIList 1.3.6.1.4.1.2011.6.139.11.1.53.1.2
This object indicates the roaming consortium member. The roaming consortium OI is a hexadecimal number in the format of HH-HH-HH or HH-HH-HH-HH-HH. The length of a roaming consortium OI is three to five bytes, for example, 12-34-56?12-34-58?34-45-67. NOTE By default, no configuration is added.RoamingConsortiumOI values are separated by question marks (?).A maximum of 32 RoamingConsortiumOI values can be configured.A RoamingConsortiumOI value must match an OIInBeacon value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwRoamingConsortiumOIInBeaconList 1.3.6.1.4.1.2011.6.139.11.1.53.1.3
This object indicates whether a roaming consortium member carries the inbeacon tag, for example, YES?NO?NO. NOTE By default, no configuration is added.A RoamingConsortiumOI value must match an OIInBeacon value.A maximum of three RoamingConsortiumOI values can be configured.in-beacon can be set to YES.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwRoamingConsortiumProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.53.1.4
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwSACProfileTable 1.3.6.1.4.1.2011.6.139.11.1.54
This table is used to configure and query SAC profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSACProfileEntry

hwSACProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.54.1
The index of this table is hwSACProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSACProfileEntry  

hwSACProfileName 1.3.6.1.4.1.2011.6.139.11.1.54.1.1
This object indicates the name of an SAC profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwSACProfUserStat 1.3.6.1.4.1.2011.6.139.11.1.54.1.2
This object indicates whether the user statistics function is enabled in the SAC profile. The default value is disable (1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSACProfVapStat 1.3.6.1.4.1.2011.6.139.11.1.54.1.3
This object indicates whether the VAP statistics function is enabled in the SAC profile. The default value is disable (1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSACProfRowStatus 1.3.6.1.4.1.2011.6.139.11.1.54.1.4
This object indicates the row status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwSACProfileActionTable 1.3.6.1.4.1.2011.6.139.11.1.55
This table describes SAC profile action configurations.This table is used to configure actions in an SAC profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSACProfileActionEntry

hwSACProfileActionEntry 1.3.6.1.4.1.2011.6.139.11.1.55.1
Indexes of this table are hwSACProfileName and hwSACProfileActionIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSACProfileActionEntry  

hwSACProfileActionIndex 1.3.6.1.4.1.2011.6.139.11.1.55.1.1
This object indicates the internal index of the action. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwSACProfileActProtocolType 1.3.6.1.4.1.2011.6.139.11.1.55.1.2
This object indicates the protocol type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(0), application(1), applicationGroup(2)  

hwSACProfileActProtocolName 1.3.6.1.4.1.2011.6.139.11.1.55.1.3
This object indicates the protocol name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwSACProfileActProtocolGrpName 1.3.6.1.4.1.2011.6.139.11.1.55.1.4
This object indicates the protocol group name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwSACProfileActionType 1.3.6.1.4.1.2011.6.139.11.1.55.1.5
This object indicates the action type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(0), deny(1), car(2), remarkDscp(3), remark8021p(4), dynamicOptimization(5), voiceDynamicOptimization(6), videoDynamicOptimization(7)  

hwSACProfileActCarCir 1.3.6.1.4.1.2011.6.139.11.1.55.1.6
This object indicates the CAR CIR value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 64..10000000 | 4294967295  

hwSACProfileActRemarkDscpValue 1.3.6.1.4.1.2011.6.139.11.1.55.1.7
This object indicates the DSCP value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

hwSACProfileActRemark8021pValue 1.3.6.1.4.1.2011.6.139.11.1.55.1.8
This object indicates the 802.1p priority.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

hwSACProfileActionRowstatus 1.3.6.1.4.1.2011.6.139.11.1.55.1.9
This object indicates the row status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanAPProvision 1.3.6.1.4.1.2011.6.139.11.1.56
OBJECT IDENTIFIER    

hwWlanAPProvisionAddressMode 1.3.6.1.4.1.2011.6.139.11.1.56.1
This object indicates the IPv4 address allocation mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(1), dhcp(2), slaac(3), invalid(-1)  

hwWlanAPProvisionIPv4Address 1.3.6.1.4.1.2011.6.139.11.1.56.2
This object indicates the AP's IPv4 address. hwWlanAPProvisionIPv4Address takes effect if hwAPIPv4Method is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanAPProvisionIPv4Mask 1.3.6.1.4.1.2011.6.139.11.1.56.3
This object indicates the AP's IPv4 mask. hwWlanAPProvisionIPv4Mask takes effect if hwAPIPv4Method is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanAPProvisionIPv4Gateway 1.3.6.1.4.1.2011.6.139.11.1.56.4
This object indicates the AP's IPv4 gateway. hwWlanAPProvisionIPv4Gateway takes effect if hwAPIPv4Method is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanAPProvisionIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.56.5
This object indicates the AP's IPv6 address. hwWlanAPProvisionIPv6Address takes effect if hwAPIPv6Method is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..46)  

hwWlanAPProvisionIPv6PrefixLen 1.3.6.1.4.1.2011.6.139.11.1.56.6
This object indicates the length of the IPv6 address prefix.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..128  

hwWlanAPProvisionIPv6Gateway 1.3.6.1.4.1.2011.6.139.11.1.56.7
This object indicates the AP's IPv6 gateway. hwWlanAPProvisionIPv6Gateway takes effect if hwAPIPv6Method is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..46)  

hwWlanAPProvisionGroupName 1.3.6.1.4.1.2011.6.139.11.1.56.8
This object indicates the group name.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwWlanAPProvisionName 1.3.6.1.4.1.2011.6.139.11.1.56.9
This object indicates the name of an AP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwWlanAPProvisionIPv4ACList 1.3.6.1.4.1.2011.6.139.11.1.56.10
This object indicates the AC IPv4 address list. NOTE ACL rules are separated by question marks (?).A maximum of four ACL rules can be configured.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanAPProvisionIPv6ACList 1.3.6.1.4.1.2011.6.139.11.1.56.11
This object indicates the AC IPv6 address list. NOTE ACL rules are separated by question marks (?).A maximum of four ACL rules can be configured.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanAPProvisionCommitAPName 1.3.6.1.4.1.2011.6.139.11.1.56.12
This object indicates that the configuration is delivered based on AP names.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwWlanAPProvisionCommitAPMac 1.3.6.1.4.1.2011.6.139.11.1.56.13
This object indicates that the configuration is delivered based on MAC addresses of APs.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwWlanAPProvisionCommitAPGroup 1.3.6.1.4.1.2011.6.139.11.1.56.14
This object indicates that the configuration is delivered based on AP groups.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWlanAPProvisionAPMode 1.3.6.1.4.1.2011.6.139.11.1.56.15
This object indicates the AP mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fat(1), cloud(2), invalid(-1)  

hwWlanAPProvisionCommitAPId 1.3.6.1.4.1.2011.6.139.11.1.56.16
This object indicates that the configuration is delivered based on AP ID.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwWlanAPProvisionCommitAll 1.3.6.1.4.1.2011.6.139.11.1.56.17
This object indicates that the configuration is delivered to all APs.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanRadioCalibrateManagement 1.3.6.1.4.1.2011.6.139.11.1.57
OBJECT IDENTIFIER    

hwWlanRadioCalibrateMode 1.3.6.1.4.1.2011.6.139.11.1.57.1
This object indicates the radio calibration mode. The default value is auto(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), manual(2), schedule(3)  

hwWlanRadioCalibrateScheduleTime 1.3.6.1.4.1.2011.6.139.11.1.57.2
This object indicates the scheduled radio calibration time.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanRadioCalibrateManualStartup 1.3.6.1.4.1.2011.6.139.11.1.57.3
This object indicates the manually triggered radio calibration. It is valid only when the radio calibration mode is manual.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1  

hwWlanRadioCalibrateAutoInterval 1.3.6.1.4.1.2011.6.139.11.1.57.4
This object indicates the automatic radio calibration interval. It is expressed in minutes. The default value is 1440.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..1440  

hwWlanRadioCalibratePolicy 1.3.6.1.4.1.2011.6.139.11.1.57.5
This object indicates the radio calibration policy.bit0: rogue-ap bit1: nonWifi bit2: load The default value is 0, indicating that this function is not enabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwWlanRadioCalibrateSensitivity 1.3.6.1.4.1.2011.6.139.11.1.57.6
This object indicates the radio calibration sensitivity. The default value is medium(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER medium(1), high(2), low(3)  

hwWlanRadioCalibrateAutoStartTime 1.3.6.1.4.1.2011.6.139.11.1.57.7
This object indicates the start time of automatic radio calibration. The default value is 00:00:00.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanMobilityObjects 1.3.6.1.4.1.2011.6.139.11.1.58
OBJECT IDENTIFIER    

hwWlanMobilityManagement 1.3.6.1.4.1.2011.6.139.11.1.58.1
OBJECT IDENTIFIER    

hwWlanMasterControllerSwitch 1.3.6.1.4.1.2011.6.139.11.1.58.1.1
This object indicates the status of the CUC function. The default value is disable (1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanConnectMasterControllerSwitch 1.3.6.1.4.1.2011.6.139.11.1.58.1.2
This objection indicates the status of the connection between the AC and Master Controller. The establishment of connection between the AC and Master Controller requires the IP address of the Master Controller. The default value is disconnect(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disconnect(1), connect(2)  

hwWlanConnectMasterControllerIPv4Addr 1.3.6.1.4.1.2011.6.139.11.1.58.1.3
This object indicates the IPv4 address of the CUC that needs to set up a link with the Master Controller.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanConnectMasterControllerIPv6Addr 1.3.6.1.4.1.2011.6.139.11.1.58.1.4
This object indicates the IPv6 address of the CUC that needs to set up a link with the Master Controller.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanMobilityServerIPv4 1.3.6.1.4.1.2011.6.139.11.1.58.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanMobilityServerIPv6 1.3.6.1.4.1.2011.6.139.11.1.58.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanMobilityServerState 1.3.6.1.4.1.2011.6.139.11.1.58.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fault(1), vmiss(2), normal(3)  

hwWlanMobilityServerSwitch 1.3.6.1.4.1.2011.6.139.11.1.58.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanMobilityAcTable 1.3.6.1.4.1.2011.6.139.11.1.58.2
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMobilityAcEntry

hwWlanMobilityAcEntry 1.3.6.1.4.1.2011.6.139.11.1.58.2.1
The index of this table is hwWlanMemAcIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMobilityAcEntry  

hwWlanMemAcIndex 1.3.6.1.4.1.2011.6.139.11.1.58.2.1.1
This object indicates the AP ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwWlanAcIPv4Address 1.3.6.1.4.1.2011.6.139.11.1.58.2.1.2
This object indicates the AC's IPv4 address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanAcIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.58.2.1.3
This object indicates the AC's IPv6 address.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanAcState 1.3.6.1.4.1.2011.6.139.11.1.58.2.1.4
This object indicates the state of connections to the AC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), fault(2)  

hwWlanAcRowStatus 1.3.6.1.4.1.2011.6.139.11.1.58.2.1.5
This object indicates the row status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanMobilityGroupTable 1.3.6.1.4.1.2011.6.139.11.1.58.3
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMobilityGroupEntry

hwWlanMobilityGroupEntry 1.3.6.1.4.1.2011.6.139.11.1.58.3.1
The index of this table is hwWlanMobilityGroupName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMobilityGroupEntry  

hwWlanMobilityGroupName 1.3.6.1.4.1.2011.6.139.11.1.58.3.1.1
This object indicates the mobility group name.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

hwWlanMobilityGroupRowStatus 1.3.6.1.4.1.2011.6.139.11.1.58.3.1.2
This object indicates to add or delete mobility groups.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanMobilityGroupMemberTable 1.3.6.1.4.1.2011.6.139.11.1.58.4
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMobilityGroupMemberEntry

hwWlanMobilityGroupMemberEntry 1.3.6.1.4.1.2011.6.139.11.1.58.4.1
Indexes of this table are hwWlanMobilityGroupName and hwWlanMobilityGroupMemberACIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMobilityGroupMemberEntry  

hwWlanMobilityGroupMemberACIndex 1.3.6.1.4.1.2011.6.139.11.1.58.4.1.1
This object indicates mobility group members (AC ID).
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwWlanMobilityGroupMemberRowStatus 1.3.6.1.4.1.2011.6.139.11.1.58.4.1.2
This object indicates to add or delete mobility group members.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanMobilityMemberIPv4Table 1.3.6.1.4.1.2011.6.139.11.1.58.5
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMobilityMemberIPv4Entry

hwWlanMobilityMemberIPv4Entry 1.3.6.1.4.1.2011.6.139.11.1.58.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMobilityMemberIPv4Entry  

hwWlanMobilityMemberIPv4Addr 1.3.6.1.4.1.2011.6.139.11.1.58.5.1.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanMobilityMemberIPv4Description 1.3.6.1.4.1.2011.6.139.11.1.58.5.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanMobilityMemberIPv4State 1.3.6.1.4.1.2011.6.139.11.1.58.5.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fault(1), normal(2), vmiss(3), invalid(4)  

hwWlanMobilityMemberIPv4RowStatus 1.3.6.1.4.1.2011.6.139.11.1.58.5.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanMobilityMemberIPv6Table 1.3.6.1.4.1.2011.6.139.11.1.58.6
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMobilityMemberIPv6Entry

hwWlanMobilityMemberIPv6Entry 1.3.6.1.4.1.2011.6.139.11.1.58.6.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMobilityMemberIPv6Entry  

hwWlanMobilityMemberIPv6Addr 1.3.6.1.4.1.2011.6.139.11.1.58.6.1.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanMobilityMemberIPv6Description 1.3.6.1.4.1.2011.6.139.11.1.58.6.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanMobilityMemberIPv6State 1.3.6.1.4.1.2011.6.139.11.1.58.6.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fault(1), normal(2), vmiss(3), invalid(4)  

hwWlanMobilityMemberIPv6RowStatus 1.3.6.1.4.1.2011.6.139.11.1.58.6.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanMobilityClientIPv4Table 1.3.6.1.4.1.2011.6.139.11.1.58.7
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMobilityClientIPv4Entry

hwWlanMobilityClientIPv4Entry 1.3.6.1.4.1.2011.6.139.11.1.58.7.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMobilityClientIPv4Entry  

hwWlanMobilityClientIPv4Addr 1.3.6.1.4.1.2011.6.139.11.1.58.7.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanMobilityClientIPv4State 1.3.6.1.4.1.2011.6.139.11.1.58.7.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fault(1), normal(2), vmiss(3)  

hwWlanMobilityClientIPv6Table 1.3.6.1.4.1.2011.6.139.11.1.58.8
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanMobilityClientIPv6Entry

hwWlanMobilityClientIPv6Entry 1.3.6.1.4.1.2011.6.139.11.1.58.8.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanMobilityClientIPv6Entry  

hwWlanMobilityClientIPv6Addr 1.3.6.1.4.1.2011.6.139.11.1.58.8.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanMobilityClientIPv6State 1.3.6.1.4.1.2011.6.139.11.1.58.8.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fault(1), normal(2), vmiss(3)  

hwWlanLanguageCodeTable 1.3.6.1.4.1.2011.6.139.11.1.59
It is the language code table. It complies with ISO 639 and is used by hotspot networks to obtain language code information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanLanguageCodeEntry

hwWlanLanguageCodeEntry 1.3.6.1.4.1.2011.6.139.11.1.59.1
The index of this table is hwWlanLanguageCode.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanLanguageCodeEntry  

hwWlanLanguageCode 1.3.6.1.4.1.2011.6.139.11.1.59.1.1
This object indicates the language code.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(2..3)  

hwWlanLanguageCodeDescription 1.3.6.1.4.1.2011.6.139.11.1.59.1.2
This object indicates the description of language codes.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwFatApConfigObjects 1.3.6.1.4.1.2011.6.139.11.1.60
OBJECT IDENTIFIER    

hwFatApGlobalConfig 1.3.6.1.4.1.2011.6.139.11.1.60.1
OBJECT IDENTIFIER    

hwFatApCountryCode 1.3.6.1.4.1.2011.6.139.11.1.60.1.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(2..8)  

hwFatApMaxStaNum 1.3.6.1.4.1.2011.6.139.11.1.60.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..256  

hwFatApStaAccessMode 1.3.6.1.4.1.2011.6.139.11.1.60.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), blacklist(2), whitelist(3)  

hwFatApStaAccessModePorfile 1.3.6.1.4.1.2011.6.139.11.1.60.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwFatApHighTempThreshold 1.3.6.1.4.1.2011.6.139.11.1.60.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 20..100 | 65535  

hwFatApLowTempThreshold 1.3.6.1.4.1.2011.6.139.11.1.60.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -70..10 | 65535  

hwFatApDcaChannel5GBandwidth 1.3.6.1.4.1.2011.6.139.11.1.60.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ht20(1), ht40(2), ht80(3)  

hwFatApDcaChannel5GChannelSet 1.3.6.1.4.1.2011.6.139.11.1.60.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwFatApDcaChannel2GChannelSet 1.3.6.1.4.1.2011.6.139.11.1.60.1.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

hwFatApDynamicBlackAgingTime 1.3.6.1.4.1.2011.6.139.11.1.60.1.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 180..3600  

hwFatApAntennaOutputMode 1.3.6.1.4.1.2011.6.139.11.1.60.1.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER combine(1), split(2)  

hwFatApRadioTable 1.3.6.1.4.1.2011.6.139.11.1.60.2
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwFatApRadioEntry

hwFatApRadioEntry 1.3.6.1.4.1.2011.6.139.11.1.60.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwFatApRadioEntry  

hwFatApRadio 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..2  

hwFatApRadio0Frequency 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER frequency5G(1), frequency2G(2)  

hwFatApRadio2gProfile 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwFatApRadio5gProfile 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwFatApRadioMeshProfile 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwFatApLocationProfile 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwFatApRadioRowStatus 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwFatApMeshWhitelistProfile 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.9
This object indicates the bound whitelist profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwFatApWdsWhitelistProfile 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.10
This object indicates the bound whitelist profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwFatApRadioSwitch 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.11
This object indicates the name of a 2G radio profile. It is the index of the table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwFatApRadioChannel 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.12
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwFatApRadioBandwidth 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.13
This object indicate a bandwidth. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ht20(1), ht40Plus(2), ht40Minus(3), ht80(4), ht160(5), invalid(255)  

hwFatApRadioEirp 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.14
This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..127  

hwFatApRadioAntennaGain 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.15
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..30 | 255  

hwFatApRadioCoverageDistance 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.16
This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..400  

hwFatApRadioWorkMode 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.17
This object indicates the radio working mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), dualband(3)  

hwFatApWidsDeviceDetectSwitch 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.18
This object indicates the status of the device detection function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwFatApWidsAttackDetectEnBmp 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.19
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwFatApWidsRogueContainSwitch 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.20
This object indicates the status of the device detection function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwFatApRadioSecondChannel 1.3.6.1.4.1.2011.6.139.11.1.60.2.1.21
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwFatApVapTable 1.3.6.1.4.1.2011.6.139.11.1.60.3
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwFatApVapEntry

hwFatApVapEntry 1.3.6.1.4.1.2011.6.139.11.1.60.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwFatApVapEntry  

hwFatApWlanId 1.3.6.1.4.1.2011.6.139.11.1.60.3.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16  

hwFatApRadioId 1.3.6.1.4.1.2011.6.139.11.1.60.3.1.2
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..2  

hwFatApVapProfile 1.3.6.1.4.1.2011.6.139.11.1.60.3.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwFatApVapProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.60.3.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwNAIRealmProfileListTable 1.3.6.1.4.1.2011.6.139.11.1.61
This table describes the NAI realm profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwNAIRealmProfileListEntry

hwNAIRealmProfileListEntry 1.3.6.1.4.1.2011.6.139.11.1.61.1
The index of this table is hwNAIRealmProfileListProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwNAIRealmProfileListEntry  

hwNAIRealmProfileListProfileName 1.3.6.1.4.1.2011.6.139.11.1.61.1.1
This object indicates the profile name.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwNAIRealmProfileListRowStatus 1.3.6.1.4.1.2011.6.139.11.1.61.1.2
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWidsSpoofProfileListTable 1.3.6.1.4.1.2011.6.139.11.1.62
This table is used to create or delete WIDS spoof SSID profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWidsSpoofProfileListEntry

hwWidsSpoofProfileListEntry 1.3.6.1.4.1.2011.6.139.11.1.62.1
The index of this table is hwWidsSpoofProfileListProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWidsSpoofProfileListEntry  

hwWidsSpoofProfileListProfileName 1.3.6.1.4.1.2011.6.139.11.1.62.1.1
This object indicates the name of a WIDS spoof SSID profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWidsSpoofProfileListRowStatus 1.3.6.1.4.1.2011.6.139.11.1.62.1.2
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWidsWhitelistProfileListTable 1.3.6.1.4.1.2011.6.139.11.1.63
This table is used to create or delete WIDS confident profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWidsWhitelistProfileListEntry

hwWidsWhitelistProfileListEntry 1.3.6.1.4.1.2011.6.139.11.1.63.1
The index of this table is hwWidsWhitelistProfileListProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWidsWhitelistProfileListEntry  

hwWidsWhitelistProfileListProfileName 1.3.6.1.4.1.2011.6.139.11.1.63.1.1
This object indicates the name of a WIDS confident profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWidsWhitelistProfileListRowStatus 1.3.6.1.4.1.2011.6.139.11.1.63.1.2
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanLoadBalanceStaticGroupTable 1.3.6.1.4.1.2011.6.139.11.1.64
This table records information about the static load balancing group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanLoadBalanceStaticGroupEntry

hwWlanLoadBalanceStaticGroupEntry 1.3.6.1.4.1.2011.6.139.11.1.64.1
The index of this table is hwWlanLBGroupName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanLoadBalanceStaticGroupEntry  

hwWlanLBGroupName 1.3.6.1.4.1.2011.6.139.11.1.64.1.1
This object indicates the name of the static load balancing group.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

hwWlanLBGapThreshold 1.3.6.1.4.1.2011.6.139.11.1.64.1.2
This object indicates the load difference threshold of a static load balancing group.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwWlanLBDenyThreshold 1.3.6.1.4.1.2011.6.139.11.1.64.1.3
This object indicates the maximum number of times an AP rejects association requests of a STA in the static load balancing group.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwWlanLBStartThreshold 1.3.6.1.4.1.2011.6.139.11.1.64.1.4
This object indicates the start threshold for load balancing in a static load balancing group.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwWlanLBGroupStatus 1.3.6.1.4.1.2011.6.139.11.1.64.1.5
This object indicates the load balancing status in the static load balancing group.1: Load is not balanced.2: Load is balanced.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwWlanLBGroupRowStatus 1.3.6.1.4.1.2011.6.139.11.1.64.1.6
This object indicates the row status of this table, which can be createAndGo(4) or destroy(6).
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanLoadBalanceStaticGroupMemberTable 1.3.6.1.4.1.2011.6.139.11.1.65
This table records information about members in the static load balancing group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanLoadBalanceStaticGroupMemberEntry

hwWlanLoadBalanceStaticGroupMemberEntry 1.3.6.1.4.1.2011.6.139.11.1.65.1
The indexes of this table are hwWlanLBGroupName, hwWlanApName, and hwWlanRadioID.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanLoadBalanceStaticGroupMemberEntry  

hwWlanLBMemberRowStatus 1.3.6.1.4.1.2011.6.139.11.1.65.1.1
This object indicates the row status of this table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanCountryCodeTable 1.3.6.1.4.1.2011.6.139.11.1.66
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanCountryCodeEntry

hwWlanCountryCodeEntry 1.3.6.1.4.1.2011.6.139.11.1.66.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanCountryCodeEntry  

hwWlanCountryCode 1.3.6.1.4.1.2011.6.139.11.1.66.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwWlanCountryCodeEngDescription 1.3.6.1.4.1.2011.6.139.11.1.66.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwWlanCountryCodeAvailableChannelSet2gBW20 1.3.6.1.4.1.2011.6.139.11.1.66.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwWlanCountryCodeAvailableChannelSet2gBW40Plus 1.3.6.1.4.1.2011.6.139.11.1.66.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwWlanCountryCodeAvailableChannelSet2gBW40Minus 1.3.6.1.4.1.2011.6.139.11.1.66.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwWlanCountryCodeAvailableChannelSet5gBW20 1.3.6.1.4.1.2011.6.139.11.1.66.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwWlanCountryCodeAvailableChannelSet5gBW40Plus 1.3.6.1.4.1.2011.6.139.11.1.66.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwWlanCountryCodeAvailableChannelSet5gBW40Minus 1.3.6.1.4.1.2011.6.139.11.1.66.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwWlanCountryCodeAvailableChannelSet5gBW80 1.3.6.1.4.1.2011.6.139.11.1.66.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwWlanCountryCodeAvailableChannelSet5gBW160 1.3.6.1.4.1.2011.6.139.11.1.66.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwUCCProfileTable 1.3.6.1.4.1.2011.6.139.11.1.67
This table is used to configure and query UCC profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwUCCProfileEntry

hwUCCProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.67.1
The index of this table is hwUCCProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwUCCProfileEntry  

hwUCCProfileName 1.3.6.1.4.1.2011.6.139.11.1.67.1.1
This object indicates the name of a UCC profile. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwUCCProfLyncVoice8021p 1.3.6.1.4.1.2011.6.139.11.1.67.1.2
This object indicates the switch of lync-voice remark 8021p.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwUCCProfLyncVoice8021pValue 1.3.6.1.4.1.2011.6.139.11.1.67.1.3
This object indicates the value of lync-voice remark 8021p.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

hwUCCProfLyncVoiceDscp 1.3.6.1.4.1.2011.6.139.11.1.67.1.4
This object indicates the switch of lync-voice remark dscp.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwUCCProfLyncVoiceDscpValue 1.3.6.1.4.1.2011.6.139.11.1.67.1.5
This object indicates the value of lync-voice remark dscp.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

hwUCCProfLyncVideo8021p 1.3.6.1.4.1.2011.6.139.11.1.67.1.6
This object indicates the switch of lync-video remark 8021p.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwUCCProfLyncVideo8021pValue 1.3.6.1.4.1.2011.6.139.11.1.67.1.7
This object indicates the value of lync-video remark 8021p.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

hwUCCProfLyncVideoDscp 1.3.6.1.4.1.2011.6.139.11.1.67.1.8
This object indicates the switch of lync-video remark dscp.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwUCCProfLyncVideoDscpValue 1.3.6.1.4.1.2011.6.139.11.1.67.1.9
This object indicates the value of lync-video remark dscp.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

hwUCCProfLyncShare8021p 1.3.6.1.4.1.2011.6.139.11.1.67.1.10
This object indicates the switch of lync-destop-share remark 8021p.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwUCCProfLyncShare8021pValue 1.3.6.1.4.1.2011.6.139.11.1.67.1.11
This object indicates the value of lync-destop-share remark 8021p.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

hwUCCProfLyncShareDscp 1.3.6.1.4.1.2011.6.139.11.1.67.1.12
This object indicates the switch of lync-destop-share remark dscp.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwUCCProfLyncShareDscpValue 1.3.6.1.4.1.2011.6.139.11.1.67.1.13
This object indicates the value of lync-destop-share remark dscp.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

hwUCCProfLyncFileTransfer8021p 1.3.6.1.4.1.2011.6.139.11.1.67.1.14
This object indicates the switch of lync-file-transfer remark 8021p.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwUCCProfLyncFileTransfer8021pValue 1.3.6.1.4.1.2011.6.139.11.1.67.1.15
This object indicates the value of lync-file-transfer remark 8021p.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

hwUCCProfLyncFileTransferDscp 1.3.6.1.4.1.2011.6.139.11.1.67.1.16
This object indicates the switch of lync-file-transfer remark dscp.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwUCCProfLyncFileTransferDscpValue 1.3.6.1.4.1.2011.6.139.11.1.67.1.17
This object indicates the value of lync-file-transfer remark dscp.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

hwUCCProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.67.1.18
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwSoftgreProfileTable 1.3.6.1.4.1.2011.6.139.11.1.68
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwSoftgreProfileEntry

hwSoftgreProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.68.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwSoftgreProfileEntry  

hwSoftgreProfileName 1.3.6.1.4.1.2011.6.139.11.1.68.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwSoftgreDestinationIPAddress 1.3.6.1.4.1.2011.6.139.11.1.68.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwSoftgreDestinationIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.68.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwSoftgreKeepaliveFlag 1.3.6.1.4.1.2011.6.139.11.1.68.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwSoftgreKeepalivePeriod 1.3.6.1.4.1.2011.6.139.11.1.68.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..32767  

hwSoftgreKeepaliveRetryTimes 1.3.6.1.4.1.2011.6.139.11.1.68.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..255  

hwSoftgreProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.68.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanIDIndexedAPSpecificTable 1.3.6.1.4.1.2011.6.139.11.1.69
This table is used to create or delete an AP specific profile and bind an AP system profile, 2G radio profile, or domain profile to it or unbind an AP system profile, 2G radio profile, or domain profile from it.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanIDIndexedAPSpecificEntry

hwWlanIDIndexedAPSpecificEntry 1.3.6.1.4.1.2011.6.139.11.1.69.1
The index of this table is hwWlanIDIndexedAPSpApId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanIDIndexedAPSpecificEntry  

hwWlanIDIndexedAPSpApId 1.3.6.1.4.1.2011.6.139.11.1.69.1.1
This object indicates the AP ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwWlanIDIndexedAPSpAPSystemProfile 1.3.6.1.4.1.2011.6.139.11.1.69.1.2
This object indicates the system profile bound to the AP specific profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwWlanIDIndexedAPSpDomainProfile 1.3.6.1.4.1.2011.6.139.11.1.69.1.3
This object indicates the domain profile bound to the AP specific profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwWlanIDIndexedAPSpApMac 1.3.6.1.4.1.2011.6.139.11.1.69.1.4
This object indicates the MAC address of an AP.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwWlanIDIndexedAPSpApTypeInfo 1.3.6.1.4.1.2011.6.139.11.1.69.1.5
This object indicates the domain profile bound to the AP specific profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwWlanIDIndexedAPSpWidsProfile 1.3.6.1.4.1.2011.6.139.11.1.69.1.6
This object indicates the bound WIDS profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwWlanIDIndexedAPSpRowStatus 1.3.6.1.4.1.2011.6.139.11.1.69.1.7
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanIDIndexedAPSpBleProfile 1.3.6.1.4.1.2011.6.139.11.1.69.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWlanIDIndexedAPSpLongitude 1.3.6.1.4.1.2011.6.139.11.1.69.1.9
This object indicates the longitude.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

hwWlanIDIndexedAPSpLatitude 1.3.6.1.4.1.2011.6.139.11.1.69.1.10
This object indicates the latitude.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..14)  

hwWlanIDIndexedSpApAddressMode 1.3.6.1.4.1.2011.6.139.11.1.69.1.11
This object indicates the IP address allocation mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER invalid(-1), static(1), dhcp(2), slaac(3)  

hwWlanIDIndexedSpApIPv4Address 1.3.6.1.4.1.2011.6.139.11.1.69.1.12
This object indicates the AP's IPv4 address. hwWlanIDIndexedSpApIPv4Address takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanIDIndexedSpApIPv4Mask 1.3.6.1.4.1.2011.6.139.11.1.69.1.13
This object indicates the AP's IPv4 mask. hwWlanIDIndexedSpApIPv4Mask takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanIDIndexedSpApIPv4Gateway 1.3.6.1.4.1.2011.6.139.11.1.69.1.14
This object indicates the AP's IPv4 gateway. hwWlanIDIndexedSpApIPv4Gateway takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanIDIndexedSpApIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.69.1.15
This object indicates the AP's IPv6 address. hwWlanIDIndexedSpApIPv6Address takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..46)  

hwWlanIDIndexedSpApIPv6PrefixLen 1.3.6.1.4.1.2011.6.139.11.1.69.1.16
This object indicates the length of the IPv6 address prefix.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..128  

hwWlanIDIndexedSpApIPv6Gateway 1.3.6.1.4.1.2011.6.139.11.1.69.1.17
This object indicates the AP's IPv6 gateway. hwWlanIDIndexedSpApIPv6Gateway takes effect if hwWlanIDIndexedSpApAddressMode is set to static.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..46)  

hwWlanIDIndexedSpIPv4ACList 1.3.6.1.4.1.2011.6.139.11.1.69.1.18
This object indicates the AC IPv4 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedSpIPv6ACList 1.3.6.1.4.1.2011.6.139.11.1.69.1.19
This object indicates the AC IPv6 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanIDIndexedSpGroupName 1.3.6.1.4.1.2011.6.139.11.1.69.1.20
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwWlanIDIndexedSpApName 1.3.6.1.4.1.2011.6.139.11.1.69.1.21
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwIDIndexedAPSpecificWiredPortTable 1.3.6.1.4.1.2011.6.139.11.1.70
This table is used to bind an AP wired port profile to an AP specific profile or unbind an AP wired port profile from an AP specific profile..
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIDIndexedAPSpecificWiredPortEntry

hwIDIndexedAPSpecificWiredPortEntry 1.3.6.1.4.1.2011.6.139.11.1.70.1
Indexes of this table are hwIDIndexedAPSpWPInterfaceType, hwIDIndexedAPSpWPInterfaceNum and hwWlanIDIndexedAPSpApId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIDIndexedAPSpecificWiredPortEntry  

hwIDIndexedAPSpWPInterfaceType 1.3.6.1.4.1.2011.6.139.11.1.70.1.1
This object indicates the interface type.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER fe(1), ge(2), trunk(3), multige(4)  

hwIDIndexedAPSpWPInterfaceNum 1.3.6.1.4.1.2011.6.139.11.1.70.1.2
This object indicates the interface index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..27  

hwIDIndexedAPSpWPProfile 1.3.6.1.4.1.2011.6.139.11.1.70.1.3
This object indicates the bound wired port profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwIDIndexedAPSpWPRowStatus 1.3.6.1.4.1.2011.6.139.11.1.70.1.4
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwIDIndexedAPSpecificRadioTable 1.3.6.1.4.1.2011.6.139.11.1.71
This table records the information about profiles bound based on radio in an AP specific profile, including 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, and spectrum profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIDIndexedAPSpecificRadioEntry

hwIDIndexedAPSpecificRadioEntry 1.3.6.1.4.1.2011.6.139.11.1.71.1
Indexes of this table are hwIDIndexedAPSpRadio and hwWlanIDIndexedAPSpApId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIDIndexedAPSpecificRadioEntry  

hwIDIndexedAPSpRadio 1.3.6.1.4.1.2011.6.139.11.1.71.1.1
This object indicates the radio ID. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..2  

hwIDIndexedAPSp5gRadioProfile 1.3.6.1.4.1.2011.6.139.11.1.71.1.2
This object indicates the bound 5G radio profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwIDIndexedAPSpMeshProfile 1.3.6.1.4.1.2011.6.139.11.1.71.1.3
This object indicates the bound Mesh profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwIDIndexedAPSpWdsProfile 1.3.6.1.4.1.2011.6.139.11.1.71.1.4
This object indicates the bound WDS profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwIDIndexedAPSpLocationProfile 1.3.6.1.4.1.2011.6.139.11.1.71.1.5
This object indicates the bound location profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwIDIndexedAPSpRadio2gProfile 1.3.6.1.4.1.2011.6.139.11.1.71.1.6
This object indicates the system profile to which AP groups are bound. The default value is default.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwIDIndexedAPSpMeshWhitelistProfile 1.3.6.1.4.1.2011.6.139.11.1.71.1.7
This object indicates the bound whitelist profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwIDIndexedAPSpWdsWhitelistProfile 1.3.6.1.4.1.2011.6.139.11.1.71.1.8
This object indicates the bound whitelist profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwIDIndexedAPSpRadioSwitch 1.3.6.1.4.1.2011.6.139.11.1.71.1.9
This object indicates the name of a 2G radio profile. It is the index of the table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), invalid(255)  

hwIDIndexedAPSpRadioChannel 1.3.6.1.4.1.2011.6.139.11.1.71.1.10
This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwIDIndexedAPSpRadioBandwidth 1.3.6.1.4.1.2011.6.139.11.1.71.1.11
This object indicate a bandwidth. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ht20(1), ht40Plus(2), ht40Minus(3), ht80(4), invalid(255)  

hwIDIndexedAPSpRadioEirp 1.3.6.1.4.1.2011.6.139.11.1.71.1.12
This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..127 | 255  

hwIDIndexedAPSpRadioAntennaGain 1.3.6.1.4.1.2011.6.139.11.1.71.1.13
This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..30 | 255  

hwIDIndexedAPSpRadioCoverageDistance 1.3.6.1.4.1.2011.6.139.11.1.71.1.14
This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..400 | 65535  

hwIDIndexedAPSpRadioWorkMode 1.3.6.1.4.1.2011.6.139.11.1.71.1.15
This object indicates the radio working mode. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), invalid(255)  

hwIDIndexedAPSpRadioFrequency 1.3.6.1.4.1.2011.6.139.11.1.71.1.16
This object indicates the setting of the frequency band for radio 0. The default value is 1 ? 1: frequency2G ? 2: frequency5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER frequency2G(1), frequency5G(2), invalid(255)  

hwIDIndexedAPSpSpectrumAnalysisSwitch 1.3.6.1.4.1.2011.6.139.11.1.71.1.17
This object indicates the status of the spectrum analysis function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), invalid(255)  

hwIDIndexedAPSpWidsDeviceDetectSwitch 1.3.6.1.4.1.2011.6.139.11.1.71.1.18
This object indicates the status of the device detection function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), invalid(255)  

hwIDIndexedAPSpWidsAttackDetectEnBmp 1.3.6.1.4.1.2011.6.139.11.1.71.1.19
This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwIDIndexedAPSpWidsRogueContainSwitch 1.3.6.1.4.1.2011.6.139.11.1.71.1.20
This object indicates the status of the device detection function. The default value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(2), invalid(255)  

hwIDIndexedAPSpRadioRowStatus 1.3.6.1.4.1.2011.6.139.11.1.71.1.21
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwIDIndexedAPSpRadioSecondChannel 1.3.6.1.4.1.2011.6.139.11.1.71.1.22
This object indicates a second radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 165 (with a separation interval of 4).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwIDIndexedAPSpecificVapTable 1.3.6.1.4.1.2011.6.139.11.1.72
This table is used to create VAPs in an AP specific profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIDIndexedAPSpecificVapEntry

hwIDIndexedAPSpecificVapEntry 1.3.6.1.4.1.2011.6.139.11.1.72.1
Indexes of this table are hwIDIndexedAPSpWlan, hwIDIndexedAPSpRadio, and hwWlanIDIndexedAPSpApId.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIDIndexedAPSpecificVapEntry  

hwIDIndexedAPSpWlan 1.3.6.1.4.1.2011.6.139.11.1.72.1.1
This object indicates the WLAN ID. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..16  

hwIDIndexedAPSpVapProfile 1.3.6.1.4.1.2011.6.139.11.1.72.1.2
This object indicates the bound VAP profile.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwIDIndexedAPSpVapRowStatus 1.3.6.1.4.1.2011.6.139.11.1.72.1.3
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwBleProfileTable 1.3.6.1.4.1.2011.6.139.11.1.73
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwBleProfileEntry

hwBleProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.73.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwBleProfileEntry  

hwWlanBLEProfileName 1.3.6.1.4.1.2011.6.139.11.1.73.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwWlanBLEBroadcasterEnable 1.3.6.1.4.1.2011.6.139.11.1.73.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanBLETxPower 1.3.6.1.4.1.2011.6.139.11.1.73.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanBLEBroadcastingUUID 1.3.6.1.4.1.2011.6.139.11.1.73.1.4
This object indicates the string type value of UUID field in the BLE broadcast frame.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

hwWlanBLEBroadcastingMajor 1.3.6.1.4.1.2011.6.139.11.1.73.1.5
This object indicates the string type value of Major field in the BLE broadcast frame.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..2)  

hwWlanBLEBroadcastingMinor 1.3.6.1.4.1.2011.6.139.11.1.73.1.6
This object indicates the string type value of Minor field in the BLE broadcast frame.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..2)  

hwWlanBLEBroadcastingReferenceRSSI 1.3.6.1.4.1.2011.6.139.11.1.73.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -97..-50 | 0  

hwWlanBLEBroadcastingInterval 1.3.6.1.4.1.2011.6.139.11.1.73.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 100..10240  

hwWlanBLESnifferEnable 1.3.6.1.4.1.2011.6.139.11.1.73.1.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwWlanBLEProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.73.1.10
This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanBLEBroadcastingUUIDHex 1.3.6.1.4.1.2011.6.139.11.1.73.1.11
This object indicates the hex type value of UUID field in the BLE broadcast frame.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwWlanBLEBroadcastingMajorHex 1.3.6.1.4.1.2011.6.139.11.1.73.1.12
This object indicates the hex type value of Major field in the BLE broadcast frame.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

hwWlanBLEBroadcastingMajorDecimal 1.3.6.1.4.1.2011.6.139.11.1.73.1.13
This object indicates the decimal type value of Major field in the BLE broadcast frame. The default value is -1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0..65535  

hwWlanBLEBroadcastingMinorHex 1.3.6.1.4.1.2011.6.139.11.1.73.1.14
This object indicates the hex type value of Minor field in the BLE broadcast frame.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

hwWlanBLEBroadcastingMinorDecimal 1.3.6.1.4.1.2011.6.139.11.1.73.1.15
This object indicates the decimal type value of Minor field in the BLE broadcast frame. The default value is -1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0..65535  

hwAPGroupCardTable 1.3.6.1.4.1.2011.6.139.11.1.74
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPGroupCardEntry

hwAPGroupCardEntry 1.3.6.1.4.1.2011.6.139.11.1.74.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPGroupCardEntry  

hwAPGrpCardIndex 1.3.6.1.4.1.2011.6.139.11.1.74.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..2  

hwAPGrpCardSerialProfile 1.3.6.1.4.1.2011.6.139.11.1.74.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPGrpCardProfile 1.3.6.1.4.1.2011.6.139.11.1.74.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPGrpCardNetUDPPort 1.3.6.1.4.1.2011.6.139.11.1.74.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1025..55535 | 4294967295  

hwAPGrpIoTRowStatus 1.3.6.1.4.1.2011.6.139.11.1.74.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPGrpCardNetTCPPort 1.3.6.1.4.1.2011.6.139.11.1.74.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1025..55535 | 4294967295  

hwAPSpecificCardTable 1.3.6.1.4.1.2011.6.139.11.1.75
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPSpecificCardEntry

hwAPSpecificCardEntry 1.3.6.1.4.1.2011.6.139.11.1.75.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPSpecificCardEntry  

hwAPSpIoTIndex 1.3.6.1.4.1.2011.6.139.11.1.75.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..2  

hwAPSpIoTSerialProfile 1.3.6.1.4.1.2011.6.139.11.1.75.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwAPSpIoTProfile 1.3.6.1.4.1.2011.6.139.11.1.75.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..35)  

hwAPSpIoTNetUDPPort 1.3.6.1.4.1.2011.6.139.11.1.75.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1025..55535 | 4294967295  

hwAPSpIoTRowStatus 1.3.6.1.4.1.2011.6.139.11.1.75.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPSpIoTNetTCPPort 1.3.6.1.4.1.2011.6.139.11.1.75.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1025..55535 | 4294967295  

hwIoTSerialProfileTable 1.3.6.1.4.1.2011.6.139.11.1.76
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIoTSerialProfileEntry

hwIoTSerialProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.76.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIoTSerialProfileEntry  

hwIoTSerialProfileName 1.3.6.1.4.1.2011.6.139.11.1.76.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwIoTSerialSpeed 1.3.6.1.4.1.2011.6.139.11.1.76.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 9600..115200  

hwIoTSerialParity 1.3.6.1.4.1.2011.6.139.11.1.76.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), space(4), mark(5)  

hwIoTSerialStopbits 1.3.6.1.4.1.2011.6.139.11.1.76.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2)  

hwIoTSerialFrameFormat 1.3.6.1.4.1.2011.6.139.11.1.76.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fixedLength(1), frameBeginEnd(2)  

hwIoTSerialFrameLength 1.3.6.1.4.1.2011.6.139.11.1.76.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1400  

hwIoTSerialFrameStart 1.3.6.1.4.1.2011.6.139.11.1.76.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwIoTSerialFrameStop 1.3.6.1.4.1.2011.6.139.11.1.76.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

hwIoTSerialProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.76.1.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwIoTProfileTable 1.3.6.1.4.1.2011.6.139.11.1.77
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIoTProfileEntry

hwIoTProfileEntry 1.3.6.1.4.1.2011.6.139.11.1.77.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIoTProfileEntry  

hwIoTProfileName 1.3.6.1.4.1.2011.6.139.11.1.77.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..35)  

hwIoTProfileConfigAgentPermitIp 1.3.6.1.4.1.2011.6.139.11.1.77.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwIoTProfileConfigAgentPermitMaskLen 1.3.6.1.4.1.2011.6.139.11.1.77.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..32  

hwIoTProfileShareKey 1.3.6.1.4.1.2011.6.139.11.1.77.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..68)  

hwIoTProfileRowStatus 1.3.6.1.4.1.2011.6.139.11.1.77.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwIoTProfileManagementServerTable 1.3.6.1.4.1.2011.6.139.11.1.78
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwIoTProfileManagementServerEntry

hwIoTProfileManagementServerEntry 1.3.6.1.4.1.2011.6.139.11.1.78.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwIoTProfileManagementServerEntry  

hwIoTProfileManagementServerIndex 1.3.6.1.4.1.2011.6.139.11.1.78.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..3  

hwIoTProfileManagementServerIp 1.3.6.1.4.1.2011.6.139.11.1.78.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwIoTProfileManagementServerPort 1.3.6.1.4.1.2011.6.139.11.1.78.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1025..55535 | 4294967295  

hwIoTProfileManagementServerRowStatus 1.3.6.1.4.1.2011.6.139.11.1.78.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwVapAntiAttackUserDefFloodTable 1.3.6.1.4.1.2011.6.139.11.1.79
This table describes SAC profile action configurations.This table is used to configure actions in an SAC profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwVapAntiAttackUserDefFloodEntry

hwVapAntiAttackUserDefFloodEntry 1.3.6.1.4.1.2011.6.139.11.1.79.1
Indexes of this table are hwVapAntiAttackDefFloodIndex and hwVapProfileName.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwVapAntiAttackUserDefFloodEntry  

hwVapAntiAttackDefFloodIndex 1.3.6.1.4.1.2011.6.139.11.1.79.1.1
This object indicates the internal index of the action. It is the index of the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..7  

hwVapAntiAttackDefFloodProtocolType 1.3.6.1.4.1.2011.6.139.11.1.79.1.2
This object indicates the protocol type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(0), l2(1), ipv4(2), ipv6(3), tcp(4), udp(5)  

hwVapAntiAttackDefFloodProtocolValue 1.3.6.1.4.1.2011.6.139.11.1.79.1.3
This object indicates the protocol value.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

hwVapAntiAttackDefFloodStaRateThreshold 1.3.6.1.4.1.2011.6.139.11.1.79.1.4
This object indicates the anti-attack user-defined flood sta-rate-threshold for the VAP.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..500 | 4294967295  

hwVapAntiAttackDefFloodBlacklistSwitch 1.3.6.1.4.1.2011.6.139.11.1.79.1.5
This object indicates the status of the VAP anti-attack user-defined flood blacklist function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwVapAntiAttackDefFloodRowStatus 1.3.6.1.4.1.2011.6.139.11.1.79.1.6
This object indicates the row status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwApProfIGMPSnoopingGroupTable 1.3.6.1.4.1.2011.6.139.11.1.80
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwApProfIGMPSnoopingGroupEntry

hwApProfIGMPSnoopingGroupEntry 1.3.6.1.4.1.2011.6.139.11.1.80.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwApProfIGMPSnoopingGroupEntry  

hwAPProfIGMPSnoopingGroupIndex 1.3.6.1.4.1.2011.6.139.11.1.80.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..31  

hwAPProfIGMPSnoopingGroupStartGroupAddr 1.3.6.1.4.1.2011.6.139.11.1.80.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwAPProfIGMPSnoopingGroupEndGroupAddr 1.3.6.1.4.1.2011.6.139.11.1.80.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwAPProfIGMPSnoopingGroupBandwidth 1.3.6.1.4.1.2011.6.139.11.1.80.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 4294967295 | 1..100000  

hwAPProfIGMPSnoopingGroupRowStatus 1.3.6.1.4.1.2011.6.139.11.1.80.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPWiredPortProfileTrafficRemarkTable 1.3.6.1.4.1.2011.6.139.11.1.81
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPWiredPortProfileTrafficRemarkEntry

hwAPWiredPortProfileTrafficRemarkEntry 1.3.6.1.4.1.2011.6.139.11.1.81.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPWiredPortProfileTrafficRemarkEntry  

hwAPWiredPortProfileTrafficRemarkDirection 1.3.6.1.4.1.2011.6.139.11.1.81.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER inbond(1), outbond(2)  

hwAPWiredPortProfileTrafficRemarkIPType 1.3.6.1.4.1.2011.6.139.11.1.81.1.2
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), l2(3)  

hwAPWiredPortProfileTrafficRemarkACLID 1.3.6.1.4.1.2011.6.139.11.1.81.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3000..3031 | 4000..4031  

hwAPWiredPortProfileTrafficRemarkType 1.3.6.1.4.1.2011.6.139.11.1.81.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dscp(1), dot1p(2)  

hwAPWiredPortProfileTrafficRemarkValue 1.3.6.1.4.1.2011.6.139.11.1.81.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

hwAPWiredPortProfileTrafficRemarkRowStatus 1.3.6.1.4.1.2011.6.139.11.1.81.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwAPTrafficProfileRemarkTable 1.3.6.1.4.1.2011.6.139.11.1.82
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwAPTrafficProfileRemarkEntry

hwAPTrafficProfileRemarkEntry 1.3.6.1.4.1.2011.6.139.11.1.82.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwAPTrafficProfileRemarkEntry  

hwAPTrafficProfileRemarkDirection 1.3.6.1.4.1.2011.6.139.11.1.82.1.1
This object indicates the ACL rule direction for packet remarking in a traffic profile. This parameter has no default value.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

hwAPTrafficProfileRemarkIPType 1.3.6.1.4.1.2011.6.139.11.1.82.1.2
This object indicates the ACL rule type for packet remarking in a traffic profile. This parameter has no default value.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER ipv4(1), ipv6(2), l2(3)  

hwAPTrafficProfileRemarkACLID 1.3.6.1.4.1.2011.6.139.11.1.82.1.3
This object indicates the ACL rule for packet remarking in a traffic profile.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3000..3031 | 4000..4031 | 6000..6031  

hwAPTrafficProfileRemarkType 1.3.6.1.4.1.2011.6.139.11.1.82.1.4
This object indicates the ACL rule type for packet remarking in a traffic profile. This parameter has no default value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dscp(1), dot11e(3)  

hwAPTrafficProfileRemarkValue 1.3.6.1.4.1.2011.6.139.11.1.82.1.5
This object indicates the ACL rule value for packet remarking in a traffic profile. This parameter has no default value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..63  

hwAPTrafficProfileRemarkRowStatus 1.3.6.1.4.1.2011.6.139.11.1.82.1.6
This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanClusterConfig 1.3.6.1.4.1.2011.6.139.11.1.83
OBJECT IDENTIFIER    

hwWlanClusterMasterConfig 1.3.6.1.4.1.2011.6.139.11.1.83.1
OBJECT IDENTIFIER    

hwWlanClusterMasterIPv4Address 1.3.6.1.4.1.2011.6.139.11.1.83.1.1
This object indicates the IPv4 address of the master controller.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanClusterMasterIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.83.1.2
This object indicates the IPv6 address of the master controller.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterPsk 1.3.6.1.4.1.2011.6.139.11.1.83.1.3
This object indicates the psk of the master controller.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterRedundancyConfig 1.3.6.1.4.1.2011.6.139.11.1.83.2
OBJECT IDENTIFIER    

hwWlanClusterRedundancyLocalIPv4Address 1.3.6.1.4.1.2011.6.139.11.1.83.2.1
This object indicates the IPv4 address of the local ac.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanClusterRedundancyLocalIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.83.2.2
This object indicates the IPv6 address of the local ac.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterRedundancyPeerIPv4Address 1.3.6.1.4.1.2011.6.139.11.1.83.2.3
This object indicates the IPv4 address of the peer ac.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanClusterRedundancyPeerIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.83.2.4
This object indicates the IPv6 address of the peer ac.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterRedundancyTrackVRRPID 1.3.6.1.4.1.2011.6.139.11.1.83.2.5
This object indicates the vrrp id.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanClusterRedundancyTrackInterface 1.3.6.1.4.1.2011.6.139.11.1.83.2.6
This object indicates the interface index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwWlanClusterRedundancyPsk 1.3.6.1.4.1.2011.6.139.11.1.83.2.7
This object indicates the psk of the redundancy ac.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterLocalIPv4Table 1.3.6.1.4.1.2011.6.139.11.1.83.3
This table describes the configuration of the local controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanClusterLocalIPv4Entry

hwWlanClusterLocalIPv4Entry 1.3.6.1.4.1.2011.6.139.11.1.83.3.1
This table has no index.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanClusterLocalIPv4Entry  

hwWlanClusterLocalIPv4Address 1.3.6.1.4.1.2011.6.139.11.1.83.3.1.1
This object indicates the IPv4 address of the local controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

hwWlanClusterLocalIPv4Psk 1.3.6.1.4.1.2011.6.139.11.1.83.3.1.2
This object indicates the psk of the local controller.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterLocalIPv4RowStatus 1.3.6.1.4.1.2011.6.139.11.1.83.3.1.3
This object indicates the row status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanClusterLocalIPv6Table 1.3.6.1.4.1.2011.6.139.11.1.83.4
This table describes the configuration of the local controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanClusterLocalIPv6Entry

hwWlanClusterLocalIPv6Entry 1.3.6.1.4.1.2011.6.139.11.1.83.4.1
This table has no index.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanClusterLocalIPv6Entry  

hwWlanClusterLocalIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.83.4.1.1
This object indicates the IPv6 address of the local controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterLocalIPv6Psk 1.3.6.1.4.1.2011.6.139.11.1.83.4.1.2
This object indicates the psk of the local controller.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterLocalIPv6RowStatus 1.3.6.1.4.1.2011.6.139.11.1.83.4.1.3
This object indicates the row status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwWlanClusterSynConfig 1.3.6.1.4.1.2011.6.139.11.1.83.5
OBJECT IDENTIFIER    

hwWlanClusterSynIPv4Address 1.3.6.1.4.1.2011.6.139.11.1.83.5.1
This object indicates the Ipv4 address of the synchronize-configuration.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hwWlanClusterSynIPv6Address 1.3.6.1.4.1.2011.6.139.11.1.83.5.2
This object indicates the Ipv6 address of the synchronize-configuration.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterACListInfoTable 1.3.6.1.4.1.2011.6.139.11.1.83.6
This table describes the ac information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwWlanClusterACListInfoEntry

hwWlanClusterACListInfoEntry 1.3.6.1.4.1.2011.6.139.11.1.83.6.1
This table has no index.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwWlanClusterACListInfoEntry  

hwWlanClusterACIndex 1.3.6.1.4.1.2011.6.139.11.1.83.6.1.1
This object indicates the index of hwWlanClusterACListInfo.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..63  

hwWlanClusterACIPv4 1.3.6.1.4.1.2011.6.139.11.1.83.6.1.2
This object indicates the ipv4 address of the ac.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hwWlanClusterACIPv6 1.3.6.1.4.1.2011.6.139.11.1.83.6.1.3
This object indicates the ipv6 address of the ac.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterACRole 1.3.6.1.4.1.2011.6.139.11.1.83.6.1.4
This object indicates the role of the ac.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2), backup(3)  

hwWlanClusterACType 1.3.6.1.4.1.2011.6.139.11.1.83.6.1.5
This object indicates the type of the ac.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterACVersion 1.3.6.1.4.1.2011.6.139.11.1.83.6.1.6
This object indicates the version of the ac.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanClusterACStatus 1.3.6.1.4.1.2011.6.139.11.1.83.6.1.7
This object indicates the status of the ac.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2), pskmismatch(3), vermismatch(4), cfgmismatch(5)  

hwWlanClusterACLastSynTime 1.3.6.1.4.1.2011.6.139.11.1.83.6.1.8
This object indicates the last synchronize time of the ac.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwWlanConfigConformance 1.3.6.1.4.1.2011.6.139.11.2
OBJECT IDENTIFIER    

hwWlanConfigCompliances 1.3.6.1.4.1.2011.6.139.11.2.1
OBJECT IDENTIFIER    

hwWlanConfigCompliance 1.3.6.1.4.1.2011.6.139.11.2.1.1
Description.
Status: current Access: read-only
MODULE-COMPLIANCE    

hwWlanConfigObjectGroups 1.3.6.1.4.1.2011.6.139.11.2.2
OBJECT IDENTIFIER    

hwWlanGlobalConfigGroups 1.3.6.1.4.1.2011.6.139.11.2.2.1
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwApAuthObjectsGroups 1.3.6.1.4.1.2011.6.139.11.2.2.2
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPGroupGroups 1.3.6.1.4.1.2011.6.139.11.2.2.3
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPGroupWiredPortGroups 1.3.6.1.4.1.2011.6.139.11.2.2.4
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPGroupRadioGroups 1.3.6.1.4.1.2011.6.139.11.2.2.5
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPGroupVapGroups 1.3.6.1.4.1.2011.6.139.11.2.2.6
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPSpecificGroups 1.3.6.1.4.1.2011.6.139.11.2.2.7
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPSpecificWiredPortGroups 1.3.6.1.4.1.2011.6.139.11.2.2.8
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPSpecificRadioGroups 1.3.6.1.4.1.2011.6.139.11.2.2.9
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPSpecificVapGroups 1.3.6.1.4.1.2011.6.139.11.2.2.10
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRegulatoryDomainProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.11
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwApSystemProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.12
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPWiredPortProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.13
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPPortLinkProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.14
Description.
Status: current Access: read-only
OBJECT-GROUP    

hw2gRadioProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.15
Description.
Status: current Access: read-only
OBJECT-GROUP    

hw5gRadioProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.16
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRrmProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.17
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAirScanProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.18
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwVapProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.19
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwSsidProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.20
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwSecurityProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.21
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPTrafficProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.22
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWlanVlanPoolGroups 1.3.6.1.4.1.2011.6.139.11.2.2.23
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwStaWhitelistProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.24
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwStaBlacklistProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.25
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWidsProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.26
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWidsSpoofProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.30
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWidsWhitelistProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.31
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwMeshProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.32
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwMeshWhitelistProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.33
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwMeshHandoverProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.34
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWdsProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.35
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWdsWhitelistProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.36
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwLocationProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.37
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwHotspot2ProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.39
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwCellularNetworkProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.40
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwConnectionCapabilityProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.41
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwOperatorNameProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.42
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwOperatorClassProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.43
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwOperatorDomainNameProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.44
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwNAIRealmProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.45
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwVenueNameProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.46
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRoamingConsortiumProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.47
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwSACProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.48
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwSACProfActionGroups 1.3.6.1.4.1.2011.6.139.11.2.2.49
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPProvisionGroups 1.3.6.1.4.1.2011.6.139.11.2.2.50
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWlanRadioCalibrateManagementGroups 1.3.6.1.4.1.2011.6.139.11.2.2.51
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWlanMobilityGroups 1.3.6.1.4.1.2011.6.139.11.2.2.52
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWlanLanguageGroups 1.3.6.1.4.1.2011.6.139.11.2.2.53
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwFatApConfigGroups 1.3.6.1.4.1.2011.6.139.11.2.2.54
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWidsSpoofProfileListGroups 1.3.6.1.4.1.2011.6.139.11.2.2.55
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWidsWhitelistProfileListGroups 1.3.6.1.4.1.2011.6.139.11.2.2.56
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWlanLoadBalanceStaticGroupGroups 1.3.6.1.4.1.2011.6.139.11.2.2.57
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWlanLoadBalanceStaticGroupMemberGroups 1.3.6.1.4.1.2011.6.139.11.2.2.58
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwWlanCountryCodeGroups 1.3.6.1.4.1.2011.6.139.11.2.2.59
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwUccProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.60
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwSoftgreProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.61
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwBleProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.66
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPGroupCardGroups 1.3.6.1.4.1.2011.6.139.11.2.2.67
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwAPSpecificCardGroups 1.3.6.1.4.1.2011.6.139.11.2.2.68
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwIoTSerialProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.69
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwIoTProfileGroups 1.3.6.1.4.1.2011.6.139.11.2.2.70
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwIoTProfileManagementServerGroups 1.3.6.1.4.1.2011.6.139.11.2.2.71
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwVapAntiAttackUserDefFloodGroups 1.3.6.1.4.1.2011.6.139.11.2.2.79
Description.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor