HUAWEI-WLAN-RADIO-MIB

File: HUAWEI-WLAN-RADIO-MIB.mib (269334 bytes)

Imported modules

HUAWEI-WLAN-DEVICE-MIB HUAWEI-WLAN-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

hwApRegionIndex hwApIndex hwApMac
hwWlan OBJECT-GROUP MODULE-COMPLIANCE
NOTIFICATION-GROUP Integer32 Unsigned32
Counter64 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE MacAddress RowStatus
DateAndTime

Defined Types

HwRadioProfileEntry  
SEQUENCE    
  hwRadioProfileName OCTET STRING
  hwRadioType INTEGER
  hwRadioRateMode INTEGER
  hwRadioRateValue INTEGER
  hwRadioChannelMode INTEGER
  hwRadioPowerMode INTEGER
  hwRadioCalibrateInterval Unsigned32
  hwRadioPERThreshold Unsigned32
  hwRadioConfictRateThreshold Unsigned32
  hwRadioRTSThreshold Unsigned32
  hwRadioFragmentThreshold Unsigned32
  hwRadioShortFrameRetryTimes Unsigned32
  hwRadioLongFrameRetryTimes Unsigned32
  hwRadioSupportShortPreamble INTEGER
  hwRadioDTIMInterval Unsigned32
  hwRadioBeaconInterval Unsigned32
  hwRadioWMMProfileName OCTET STRING
  hwRadioProfileRowStatus RowStatus
  hwRadio80211nGuardIntervalMode INTEGER
  hwRadio80211nAMPDUMaxLengthExponent Integer32
  hwRadioCalibrateEnable INTEGER
  hwRadioInterfDetDevice Integer32
  hwRadioApComInterfThreshold Integer32
  hwRadioApAdjInterfThreshold Integer32
  hwRadioStaInterfThreshold Integer32
  hwRadioDeviceReportDuration Integer32
  hwRadioRTSMode INTEGER
  hwRadioWifiLight INTEGER
  hwRadioBeamformingSwitch INTEGER
  hwRadioWidsDevSynchronizationInt Integer32
  hwRadioChannelSwitchAnnouncement INTEGER
  hwRadioChannelSwitchMode INTEGER
  hwRadioStaAccessSignalStrengthSwitch INTEGER
  hwRadioStaAccessSignalStrengthThreshold Integer32
  hwRadioBackgroundListenNeighborSwitch INTEGER
  hwRadioBackgroundScanningServiceThreshold Integer32
  hwRadioBackgroundScanningClientThreshold Integer32
  hwRadioStaAccessRateLimitSwitch INTEGER
  hwRadioStaAccessRateLimitThreshold INTEGER
  hwRadioSpectrumAnalysisScanPeriod Integer32
  hwRadioSpectrumAnalysisScanInterval Integer32
  hwRadioHighDenseSwitch Integer32
  hwRadioHighDenseMode Integer32
  hwRadioStaOfflineSignalStrengthSwitch Integer32
  hwRadioStaOfflineSignalStrengthThreshold Integer32
  hwRadioStaOfflineRateLimitSwitch Integer32
  hwRadioStaOfflineRateThreshold Integer32
  hwRadioDynamicAdjustPowerSwitch Integer32
  hwRadioLocationReportTime Integer32
  hwRadioLocationScanInterval Integer32
  hwRadioLocationScanPeriod Integer32
  hwRadioAirTimeScheduleSwitch Integer32
  hwRadioCalibrateScanCycle Unsigned32
  hwRadioUacPolicyType INTEGER
  hwRadioUacPolicySwitch INTEGER
  hwRadioUacAccessThreshold Integer32
  hwRadioUacRoamThreshold Integer32
  hwRadioUacHideSSIDSwitch INTEGER
  hwRadio80211acGuardIntervalMode INTEGER
  hwRadio80211acAMPDUMaxLengthExponent Integer32
  hwRadio80211bgBasicRateSet OCTET STRING
  hwRadio80211bgSupportRateSet OCTET STRING
  hwRadio80211aBasicRateSet OCTET STRING
  hwRadio80211aSupportRateSet OCTET STRING
  hwRadio80211nSupportMCS OCTET STRING
  hwRadio80211acSupportMcsMapMcs OCTET STRING
  hwRadioMulticastRate2G Integer32
  hwRadioMulticastRate5G Integer32
  hwRadioLegacyStationEnable INTEGER
  hwRadioLocationScanChannel2G INTEGER
  hwRadioLocationScanChannel5G INTEGER
  hwRadioAMSDUTxEnable INTEGER
  hwRadioAMSDUTxMaxSubFrames Integer32

HwRadioManageEntry  
SEQUENCE    
  hwRadioID Unsigned32
  hwRadioMngBaseBssID MacAddress
  hwRadioMngRadioProfileName OCTET STRING
  hwRadioMngState INTEGER
  hwRadioMngChannel Unsigned32
  hwRadioMngPowerLevel Unsigned32
  hwRadioMngPower Integer32
  hwRadioAvailableSntennaNumber INTEGER
  hwRadioWorkingChannel Unsigned32
  hwRadioWorkingPowerLevel Unsigned32
  hwRadioWorkingPower Unsigned32
  hwRadioMngChannelBandwidth INTEGER
  hwRadioWorkingChannelBandwidth INTEGER
  hwRadio80211nMCSValue Integer32
  hwRadioWidsWorkMode INTEGER
  hwRadioMngBinded INTEGER
  hwRadioDeviceDetectEnable INTEGER
  hwRadioMaxTxPwrLvl Integer32
  hwRadioPwrAttRange Integer32
  hwRadioPwrAttValue Integer32
  hwRadioAntennaGain Integer32
  hwRadioBridgeWhitelistEnable INTEGER
  hwRadioBridgeWhitelistName OCTET STRING
  hwRadioBridgeStpSwitch INTEGER
  hwRadioBridgeSwitch INTEGER
  hwRadioBridgeMode INTEGER
  hwRadioUndoBridgeWhitelist Integer32
  hwRadioUserTrafficScheduler INTEGER
  hwRadioCountermeasuresMode Unsigned32
  hwRadioFrequency INTEGER
  hwRadioCountermeasuresSwitch INTEGER
  hwRadioSpectrumAnalysisEnable Integer32
  hwRadioWidsAttackDetEnable Integer32
  hwRadioMeshWhitelistName OCTET STRING
  hwRadioUndoMeshWhitelist Integer32
  hwRadioMeshRole INTEGER
  hwRadioLocationEnable Integer32
  hwRadioLocationScanChannelEnable Integer32
  hwRadio80211nMulticastMCSValue Integer32
  hwRadioSpectrogramServerReportEnable Integer32
  hwRadioRadioMulticastRateValue INTEGER
  hwRadio11acSpatialStream Integer32
  hwRadio11acMCSValue Integer32
  hwRadioActiveSwitch INTEGER

HwRadioCalibrateStatisicsEntry  
SEQUENCE    
  hwRadioCalStatisSignalBadCount Unsigned32
  hwRadioCalStatisCalibratePowerCount Unsigned32
  hwRadioCalStatisCalibrateChannelCount Unsigned32
  hwRadioCalibrateStatisicsOperMode INTEGER

HwRadioAuthNeighborInfEntry  
SEQUENCE    
  hwAuthenticRadioNeighborAPID OCTET STRING
  hwAuthenticRadioNeighborChannel OCTET STRING
  hwAuthenticRadioNeighborFrontAttenu OCTET STRING
  hwAuthenticRadioNeighborBackAttenu OCTET STRING
  hwAuthenticRadioNeighborSSID OCTET STRING

HwRadioLoadBalanceGroupEntry  
SEQUENCE    
  hwLBGroupName OCTET STRING
  hwLBGroupMode INTEGER
  hwLBGapThreshold Integer32
  hwLBAssociateThreshold Unsigned32
  hwLBGroupStatus INTEGER
  hwLBGroupRowStatus RowStatus

HwRadioLoadBalanceGroupMemberEntry  
SEQUENCE    
  hwLBMemberRadioChannel Unsigned32
  hwLBMemberRadioPowerLevel Unsigned32
  hwLBMemberRadioPower Unsigned32
  hwLBMemberRadioSeesionNum Unsigned32
  hwLBMemberRadioTraffic Unsigned32
  hwLBMemberRowStatus RowStatus

HwRadioUncontrolAPInfEntry  
SEQUENCE    
  hwUncontrolAPIndex Integer32
  hwUncontrolAPBSSID MacAddress
  hwAuthAPIndex Integer32
  hwUncontrolAPChannel Unsigned32
  hwUncontrolAPRSSI Integer32
  hwUncontrolAPSSID OCTET STRING

HwRadioPerformanceStatEntry  
SEQUENCE    
  hwRadioRcvFrames Unsigned32
  hwRadioRcvBytes Unsigned32
  hwRadioSendFrames Unsigned32
  hwRadioSendBytes Unsigned32
  hwRadioSendRtsSuccess Unsigned32
  hwRadioSendUnicast Unsigned32
  hwRadioSendBroadcast Unsigned32
  hwRadioSendFailFrames Unsigned32
  hwRadioRcvErrFrames Unsigned32
  hwRadioRcvPhyErrFrames Unsigned32
  hwRadioRcvCrcErrFrames Unsigned32
  hwRadioRcvMicErrFrames Unsigned32
  hwRadioRcvKeyDecryptErrFrames Unsigned32
  hwRadioRetryFrames Unsigned32
  hwRadioPER Unsigned32
  hwRadioChUtilizationRate Unsigned32
  hwRadioPerformanceStatOperMode INTEGER
  hwRadioPEROfLastPeriod Unsigned32
  hwRadioRcvSignalStrength Integer32
  hwRadioDownMacErrFrames Unsigned32
  hwRadioRcvPower Integer32
  hwRadioRcvUnicastFrames Counter64
  hwRadioRcvMngFrames Counter64
  hwRadioRcvCtrlFrames Counter64
  hwRadioRcvDataFrames Counter64
  hwRadioSendMngFrames Counter64
  hwRadioSendCtrlFrames Counter64
  hwRadioSendDataFrames Counter64
  hwRadioStaMaxSignalStrength Integer32
  hwRadioStaMinSignalStrength Integer32
  hwRadioStaAvgSignalStrength Integer32
  hwRadioSendRate Unsigned32
  hwRadioRecvRate Unsigned32
  hwRadioDropRate Unsigned32
  hwRadioAirPortDhcpFrames Counter64
  hwRadioAirPortEapolFrames Counter64
  hwRadioAirPortPsPollFrames Counter64
  hwRadioAssocRequestFrames Counter64
  hwRadioAssocResponseFrames Counter64
  hwRadioReassocRequestFrames Counter64
  hwRadioReassocResponseFrames Counter64
  hwRadioDisassocFrames Counter64
  hwRadioDisauthFrames Counter64
  hwRadioRcvFrames64Bits Counter64
  hwRadioRcvBytes64Bits Counter64
  hwRadioSendFrames64Bits Counter64
  hwRadioSendBytes64Bits Counter64
  hwRadioSendRtsSuccess64Bits Counter64
  hwRadioSendUnicast64Bits Counter64
  hwRadioSendBroadcast64Bits Counter64
  hwRadioSendFailFrames64Bits Counter64
  hwRadioRcvErrFrames64Bits Counter64
  hwRadioRcvPhyErrFrames64Bits Counter64
  hwRadioRcvCrcErrFrames64Bits Counter64
  hwRadioRcvMicErrFrames64Bits Counter64
  hwRadioRcvKeyDecryptErrFrames64Bits Counter64
  hwRadioRetryFrames64Bits Counter64
  hwRadioDownMacErrFrames64Bits Counter64
  hwRadioNoise Integer32
  hwRadioActualBandwidth Unsigned32
  hwRadioFrames Counter64
  hwRadioSendDropFrames64Bits Counter64
  hwRadioRcvDropFrames64Bits Counter64
  hwRadioChannelFreeRate Unsigned32
  hwRadioTxRate Unsigned32
  hwRadioRxRate Unsigned32
  hwRadioChInterferenceRate Unsigned32

HwRadioUnauthenticNeighborInfoEntry  
SEQUENCE    
  hwUnauthenticRadioNeighborBSSID OCTET STRING
  hwUnauthenticRadioNeighborRSSI OCTET STRING
  hwunauthenticRadioNeighborChannel OCTET STRING
  hwUnauthenticRadioNeighborSSID OCTET STRING

HwRadioRegionCalibrateEntry  
SEQUENCE    
  hwRegionCalibrateStartupMode INTEGER
  hwRegionCalibrateAutoTime DateAndTime
  hwRegionCalibrateListenMode INTEGER
  hwRegionCalibrateStatus INTEGER

HwRadioParaStatisticEntry  
SEQUENCE    
  hwRadioStaAveSignalStrength Integer32

HwMacRadioManageEntry  
SEQUENCE    
  hwMacRadioID Unsigned32
  hwMacRadioMngBaseBssID MacAddress
  hwMacRadioMngRadioProfileName OCTET STRING
  hwMacRadioMngState INTEGER
  hwMacRadioMngChannel Unsigned32
  hwMacRadioMngPowerLevel Unsigned32
  hwMacRadioMngPower Integer32
  hwMacRadioAvailableSntennaNumber INTEGER
  hwMacRadioWorkingChannel Unsigned32
  hwMacRadioWorkingPowerLevel Unsigned32
  hwMacRadioWorkingPower Unsigned32
  hwMacRadioMngChannelBandwidth INTEGER
  hwMacRadioWorkingChannelBandwidth INTEGER
  hwMacRadio80211nMCSValue Integer32
  hwMacRadioWidsWorkMode INTEGER
  hwMacRadioMngBinded INTEGER
  hwMacRadioMaxTxPwrLvl Integer32
  hwMacRadioPwrAttRange Integer32
  hwMacRadioPwrAttValue Integer32
  hwMacRadioAntennaGain Integer32
  hwMacRadioBridgeWhitelistEnable INTEGER
  hwMacRadioBridgeWhitelistName OCTET STRING
  hwMacRadioBridgeStpSwitch INTEGER
  hwMacRadioBridgeSwitch INTEGER
  hwMacRadioBridgeMode INTEGER
  hwMacRadioUndoBridgeWhitelist Integer32
  hwMacRadioUserTrafficScheduler INTEGER
  hwMacRadioCountermeasuresMode Unsigned32
  hwMacRadioFrequency INTEGER
  hwMacRadioCountermeasuresSwitch INTEGER
  hwMacRadioSpectrumAnalysisEnable Integer32
  hwMACRadioWidsAttackDetEnable Integer32
  hwMacRadioMeshWhitelistName OCTET STRING
  hwMacUndoMeshWhitelist Integer32
  hwMacRadioMeshRole INTEGER
  hwMacRadioLocationEnable Integer32
  hwMacRadioLocationScanChannelEnable Integer32
  hwMacRadio80211nMulticastMCSValue Integer32
  hwMacRadioSpectrogramServerReportEnable Integer32
  hwMacRadioMulticastRateValue INTEGER
  hwMacRadio11acSpatialStream Integer32
  hwMacRadio11acMCSValue Integer32
  hwMacRadioActiveSwitch INTEGER

HwMacRadioCalibrateStatisicsEntry  
SEQUENCE    
  hwMacRadioCalStatisSignalBadCount Unsigned32
  hwMacRadioCalStatisCalibratePowerCount Unsigned32
  hwMacRadioCalStatisCalibrateChannelCount Unsigned32
  hwMacRadioCalibrateStatisicsOperMode INTEGER

HwMacRadioAuthNeighborInfEntry  
SEQUENCE    
  hwMacAuthenticRadioNeighborAPID OCTET STRING
  hwMacAuthenticRadioNeighborChannel OCTET STRING
  hwMacAuthenticRadioNeighborFrontAttenu OCTET STRING
  hwMacAuthenticRadioNeighborBackAttenu OCTET STRING
  hwMacAuthenticRadioNeighborAPMac OCTET STRING
  hwMacAuthenticRadioNeighborSSID OCTET STRING

HwMacRadioLoadBalanceGroupMemberEntry  
SEQUENCE    
  hwMacLBMemberRadioChannel Unsigned32
  hwMacLBMemberRadioPowerLevel Unsigned32
  hwMacLBMemberRadioPower Unsigned32
  hwMacLBMemberRadioSeesionNum Unsigned32
  hwMacLBMemberRadioTraffic Unsigned32
  hwMacLBMemberRowStatus RowStatus

HwMacRadioPerformanceStatEntry  
SEQUENCE    
  hwMacRadioRcvFrames Unsigned32
  hwMacRadioRcvBytes Unsigned32
  hwMacRadioSendFrames Unsigned32
  hwMacRadioSendBytes Unsigned32
  hwMacRadioSendRtsSuccess Unsigned32
  hwMacRadioSendUnicast Unsigned32
  hwMacRadioSendBroadcast Unsigned32
  hwMacRadioSendFailFrames Unsigned32
  hwMacRadioRcvErrFrames Unsigned32
  hwMacRadioRcvPhyErrFrames Unsigned32
  hwMacRadioRcvCrcErrFrames Unsigned32
  hwMacRadioRcvMicErrFrames Unsigned32
  hwMacRadioRcvKeyDecryptErrFrames Unsigned32
  hwMacRadioRetryFrames Unsigned32
  hwMacRadioPER Unsigned32
  hwMacRadioChUtilizationRate Unsigned32
  hwMacRadioPerformanceStatOperMode INTEGER
  hwMacRadioPEROfLastPeriod Unsigned32
  hwMacRadioRcvSignalStrength Integer32
  hwMacRadioDownMacErrFrames Unsigned32
  hwMacRadioRcvPower Integer32
  hwMacRadioRcvUnicastFrames Counter64
  hwMacRadioRcvMngFrames Counter64
  hwMacRadioRcvCtrlFrames Counter64
  hwMacRadioRcvDataFrames Counter64
  hwMacRadioSendMngFrames Counter64
  hwMacRadioSendCtrlFrames Counter64
  hwMacRadioSendDataFrames Counter64
  hwMacRadioStaMaxSignalStrength Integer32
  hwMacRadioStaMinSignalStrength Integer32
  hwMacRadioStaAvgSignalStrength Integer32
  hwMacRadioSendRate Unsigned32
  hwMacRadioRecvRate Unsigned32
  hwMacRadioDropRate Unsigned32
  hwMacRadioAirPortDhcpFrames Counter64
  hwMacRadioAirPortEapolFrames Counter64
  hwMacRadioAirPortPsPollFrames Counter64
  hwMacRadioAssocRequestFrames Counter64
  hwMacRadioAssocResponseFrames Counter64
  hwMacRadioReassocRequestFrames Counter64
  hwMacRadioReassocResponseFrames Counter64
  hwMacRadioDisassocFrames Counter64
  hwMacRadioDisauthFrames Counter64
  hwMacRadioRcvFrames64Bits Counter64
  hwMacRadioRcvBytes64Bits Counter64
  hwMacRadioSendFrames64Bits Counter64
  hwMacRadioSendBytes64Bits Counter64
  hwMacRadioSendRtsSuccess64Bits Counter64
  hwMacRadioSendUnicast64Bits Counter64
  hwMacRadioSendBroadcast64Bits Counter64
  hwMacRadioSendFailFrames64Bits Counter64
  hwMacRadioRcvErrFrames64Bits Counter64
  hwMacRadioRcvPhyErrFrames64Bits Counter64
  hwMacRadioRcvCrcErrFrames64Bits Counter64
  hwMacRadioRcvMicErrFrames64Bits Counter64
  hwMacRadioRcvKeyDecryptErrFrames64Bits Counter64
  hwMacRadioRetryFrames64Bits Counter64
  hwMacRadioDownMacErrFrames64Bits Counter64
  hwMacRadioNoise Integer32
  hwMacRadioActualBandwidth Unsigned32
  hwMacRadioFrames Counter64
  hwMacRadioSendDropFrames64Bits Counter64
  hwMacRadioRcvDropFrames64Bits Counter64
  hwMacRadioChannelFreeRate Unsigned32
  hwMacRadioTxRate Unsigned32
  hwMacRadioRxRate Unsigned32
  hwMacRadioChInterferenceRate Unsigned32

HwMacRadioUnauthenticNeighborInfoEntry  
SEQUENCE    
  hwMacUnauthenticRadioNeighborBSSID OCTET STRING
  hwMacUnauthenticRadioNeighborRSSI OCTET STRING
  hwMacunauthenticRadioNeighborChannel OCTET STRING
  hwMacUnauthenticRadioNeighborSSID OCTET STRING

HwRadioInfoEntry  
SEQUENCE    
  hwRadioDecsption OCTET STRING
  hwRadioPortType OCTET STRING
  hwRadioMaxMtu Integer32
  hwRadioBandwidth Integer32
  hwRadioMac MacAddress
  hwRadioAdminStatus INTEGER
  hwRadioOperStatus INTEGER
  hwRadioLastChange Integer32
  hwRadioInfoUpDownTimes Integer32
  hwRadioAutoOffSwitch INTEGER
  hwRadioAutoOffStartTime OCTET STRING
  hwRadioAutoOffEndTime OCTET STRING

HwMacRadioInfoEntry  
SEQUENCE    
  hwMacRadioDecsption OCTET STRING
  hwMacRadioPortType OCTET STRING
  hwMacRadioMaxMtu Integer32
  hwMacRadioBandwidth Integer32
  hwMacRadioMac MacAddress
  hwMacRadioAdminStatus INTEGER
  hwMacRadioOperStatus INTEGER
  hwMacRadioLastChange Integer32
  hwMacRadioInfoUpDownTimes Integer32
  hwMacRadioAutoOffSwitch INTEGER
  hwMacRadioAutoOffStartTime OCTET STRING
  hwMacRadioAutoOffEndTime OCTET STRING

HwConnectProfileEntry  
SEQUENCE    
  hwConnectProfileName OCTET STRING
  hwConnectSsid OCTET STRING
  hwConnectPeerMac MacAddress
  hwConnectPskPassPhase OCTET STRING
  hwConnectProfileActived Integer32
  hwConnectProfileRowStatus RowStatus

HwRadioBasicSettingEntry  
SEQUENCE    
  hwApRadioID Integer32
  hwApRadioTxPower Integer32
  hwApRadioRtsThreshold Integer32

HwConnectStatusEntry  
SEQUENCE    
  hwConnectStatusPeerMac MacAddress
  hwConnectStatusSsid OCTET STRING
  hwConnectStatus INTEGER
  hwConnectStatusSNR Integer32
  hwConnectStatusNoiseFloor Integer32
  hwConnectStatusChannel Integer32
  hwConnectStatusActualTxPower Integer32
  hwConnectStatusBeaconInterval Integer32
  hwConnectStatusCurrentRate Integer32
  hwConnectStatusTxBeamforming Integer32
  hwConnectStatusActualCountryCode Integer32
  hwConnectStatusDistance Integer32
  hwConnectStatusCurrentRateKbps Integer32
  hwConnectStatusHtMode INTEGER
  hwConnectStatusGIMode INTEGER

HwConnectStatisticsEntry  
SEQUENCE    
  hwConnectStatisticsPeerMac MacAddress
  hwConnectRxOkUcastDataFrames Counter64
  hwConnectRxOkUcastDataBytes Counter64
  hwConnectTxOkUcastDataFrames Counter64
  hwConnectTxOkUcastDataBytes Counter64
  hwConnectRxThroughput Unsigned32
  hwConnectTxThroughput Unsigned32
  hwConnectRxErrFrames Counter64
  hwConnectTxErrUcastDataFrames Counter64
  hwConnectUcastDataFrameTxRetryRatio Unsigned32
  hwConnectOnlineTime Unsigned32
  hwConnectStatisticsReset INTEGER

HwConnectRateHistogramEntry  
SEQUENCE    
  hwConnectRateStatDirection INTEGER
  hwConnectRateStatRange Integer32
  hwConnectRateStatUcastDataFrames Counter64

HwConnectAMPDUHistogramEntry  
SEQUENCE    
  hwConnectAMPDUStatDirection INTEGER
  hwConnectAMPDUStatRange Integer32
  hwConnectAMPDUStatUcastDataFrames Counter64

HwConnectLenHistogramEntry  
SEQUENCE    
  hwConnectDataLenStatDirection INTEGER
  hwConnectDataLenStatLength Integer32
  hwConnectDataLenStatFrameCounts Counter64

HwConnectMaxSnrEntry  
SEQUENCE    
  hwConnectMaxSnrPeerMAC MacAddress
  hwConnectMaxSnrValue Integer32
  hwConnectMaxSnrNoiseFloor Integer32
  hwConnectMaxSnrSSID OCTET STRING
  hwConnectMaxSnrTime DateAndTime

HwRadioQueryPowerlevelEntry  
SEQUENCE    
  hwRadioQueryPowerlevelChannel Integer32
  hwRadioQueryPowerlevelBandwidth Integer32
  hwRadioQueryPowerlevelMax Integer32

Defined Values

hwRadio 1.3.6.1.4.1.2011.6.139.3
The HUAWEI-WLAN-RADIO-MIB contains objects to realize the management of AC at the side of the quality of wireless signal for AP.
MODULE-IDENTITY    

hwRadioProfileTable 1.3.6.1.4.1.2011.6.139.3.1
Huawei radio profile table. Radio profile is aggregate of a group of configuration. The content of the table contains : radio profile name, radio type, radio rate mode , the value of radio rate, radio channel mode, radio power mode, radio calibrate interval, radio PER threshold, radio confict rate threshold, radio RTS/CTS threshold, radio fragment threshold, radio short frame retry times, radio long frame retry times, radio support short preamble, radio DTIM interval, radio WMM profile name, radio profile row status, radio 80211n channel bandwidth, radio 80211n fast MCS feedback, radio 80211n guard interval mode, radio 80211n reduced Inter frame Space, radio 80211n AMSDU length capability, radio 80211n AMPDU length capability, radio 80211n MCS Spatial streams, radio 80211n MCS modulation, radio 80211n MCS code rate. The index of the radio profile table is hwRadioProfileName, A radio profile name is an unique identifier to a radio profile. The detail description about the index can refer to the node hwRadioProfileName description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioProfileEntry

hwRadioProfileEntry 1.3.6.1.4.1.2011.6.139.3.1.1
Huawei radio profile table entry. The entry of the huawei radio profile table, all the nodes of the huawei radio profile table are been configured. The detail of the table entry would be explained by the description of the nodes of the table. The index of the radio profile table is hwRadioProfileName, A radio profile name is an unique identifier to a radio profile. The detail description about the index can refer to the node hwRadioProfileName description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioProfileEntry  

hwRadioProfileName 1.3.6.1.4.1.2011.6.139.3.1.1.1
A human readable string representing the name of the radio profile. This is the (radio profile) model dependent radio profile ID. The request of the radio parofile name string in detail as follows: - The length of the radio profile name at least contain 1 Byte ASCII characters,at most contain 31 Byte ASCII characters. - Any ASCII characters value must be included from 0x20 to 0x7E. - The question mark ASCII characters can't be included . - The double quotation marks ASCII characters can't appear at the beginning and the end. - The blank ASCII characters can't follow the double quotation marks ASCII characters. - The blank ASCII characters can't appear at the beginning and the end.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwRadioType 1.3.6.1.4.1.2011.6.139.3.1.1.2
The radio type is supported by the radio profile.Each radio type has its corresponding radio model. This is the (radio profile) model dependent radio profile ID. The value of the radio type will be chosen one of the following enum value: auto,dot11b,dot11a,dot11g,dot11n,dot11bg,dot11an,dot11bgn. Each eadion type will set the radio profile work on the given radio mode,and the radion has its corresponding frequency range of the wireless signal. The corresponding relationship between the radion type and the radion mode as follows: - auto,it chose the supported radio mode by the radio in itself, chose the frist reported mode defaultly. - dot11b, it set the radio profile work on 802.11b mode. - dot11a, it set the radio profile work on 802.11a mode. - dot11g, it set the radio profile work on 802.11g mode. - dot11n, it set the radio profile work on 802.11n mode. - dot11bg,it set the radio profile work on compatiblt mode of 802.11b and 802.11g. - dot11an,it set the radio profile work on compatiblt mode of 802.11a and 802.11n. - dot11gn,it set the radio profile work on compatiblt mode of 802.11n and 802.11g. - dot11bgn,it set the radio profile work on compatiblt mode of 802.11b , 802.11g and 802.11n. Notes if the setted radio type for the radio profile isn't the supported radion type of a radio in itself , the radon wouldn't work normally .
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER auto(1), dot11b(2), dot11a(3), dot11g(4), dot11n(5), dot11bg(6), dot11an(7), dot11bgn(8), dot11gn(9), dot11ac(10)  

hwRadioRateMode 1.3.6.1.4.1.2011.6.139.3.1.1.3
An object, which causes the way change to the radio support rate as the given mode when it's been modified. The meaning of the value in the enum list describe as following. Auto mode means the radio could working on all of the radio's support rates and hwRadioRateValue has the rate, which may be below or equal max rate automaticly. Designate mode means you can set a radio's specified support rate by the node hwRadioRateValue.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(-1), auto(1), designate(2)  

hwRadioRateValue 1.3.6.1.4.1.2011.6.139.3.1.1.4
The value of radio support rate, which is used together with the radio rate mode, designates the max rate of transmission by the radio profile. While the radio rate mode is auto, the radio rate value specify the max rate defaultly, and this node is useless. While the radio rate mode is designate, the radio rate value specify the max rate by the way of designation as the chosed rate value. It will give the combination meaning of enum member. each enum member fits together as tow part,the frist part is rate which means the radio rate, the second part means the magnitude of the support rate value, and the units is Mbps, such as rate1 means the max rate value supported by the radio profile is 1Mbps, rate2 means the max rate value supported by the radio profile is 2Mbps..., and so on. Notes the setting of this node must set the hwRadioRateMode node as designate. Please refer to the description of hwRadioRateMode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(-1), rate1(1), rate2(2), rate55(3), rate6(4), rate9(5), rate11(6), rate12(7), rate18(8), rate22(9), rate24(10), rate33(11), rate36(12), rate48(13), rate54(14)  

hwRadioChannelMode 1.3.6.1.4.1.2011.6.139.3.1.1.5
The control mode of radio's channel. Auto means radio chooses the feat channel automatically on the basis of the detectted circumambienceis of the wireless signal in itself; Fixed means radio uses the channel as the configuration of administrator. Notes: The auto mode is recommended thanks to the changeful working circumambienceis of the radio wireless signal. If it uses the fixed mode, must detect the working circumambienceis of the radio wireless signal for the ap fristly, then choose the feat channel, otherwise the wireless signal maybe coflict and it would make worse to the quality of the communication.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER auto(1), fixed(2)  

hwRadioPowerMode 1.3.6.1.4.1.2011.6.139.3.1.1.6
The control mode of radio's power level. Auto means radio chooses the feat power level automatically on the basis of the detectted circumambienceis of the wireless signal in itself; Fixed means radio uses the power level as the configuration of administrator. Notes: The auto mode is recommended thanks to the changeful working circumambienceis of the radio wireless signal. If it uses the fixed mode, must detect the working circumambienceis of the radio wireless signal for the ap fristly, then choose the feat power level, otherwise the wireless signal maybe coflict and it would make worse to the quality of the communication.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER auto(1), fixed(2)  

hwRadioCalibrateInterval 1.3.6.1.4.1.2011.6.139.3.1.1.7
An interval uses to detect the rate of the lost signal packets and the conflicted signal packets periodically. If it sets the interval, radio will detect the signal quality in the configed calibrate interval. the units of the interval is minute, the range of the interval is from 5 minutes to 10080 minutes, and the default calibrate interval is 720 minutes.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwRadioPERThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.8
A threshold standard, which uses the units percent ,gives an utmost rate to the lost signal packet or the error signal packet. The range of the threshold is from 3 to 50 percent, and the default PER threshold is 30 percent. If the average percent is out of the threshold, the Radio's channel or power level would be changed. when the MAC layer of the radio sends a signal packet at the least speed, and retransmits it the largest times, still could not receive any ACK or NACK packet, it will be thought as signal packet lost or error.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwRadioConfictRateThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.9
A threshold standard, which uses the units percent ,gives an utmost rate to the conflicted signal packet. The range of the threshold is from 20 to 80 percent, and the default conflict rate threshold is 60 percent. If the average percent is out of the threshold, the Radio's channel or power level would be changed. when the MAC layer of the radio sends a signal packet at the least speed, and retransmits it the largest times, still could not receive any ACK packet, it will be thought as signal packet conflicted.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwRadioRTSThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.10
A threshold standard, which judges whether need to send a RTS frame, gives an utmost length to the frame packet from the MAC layer. Once the length of a frame from MAC layer preponderates over the RTS/CTS threshold, it needs to send RTS frame befor the frame from MAC layer. the units of the RTS/CTS threshold is byte, the range of the threshold is from 64 Bytes to 2347 Bytes, and the default RTS/CTS threshold is 2347 Bytes.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwRadioFragmentThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.11
A threshold standard, which judges whether need to split a frame to several frames, gives an utmost length to the frame packet from the MAC layer. Once the length of a frame from MAC layer preponderates over the fragment threshold, it needs to split the frame to several splited frames. the units of the fragment threshold is byte, the range of the threshold is from 64 Bytes to 2346 Bytes, and the default fragment threshold is 2346 Bytes.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwRadioShortFrameRetryTimes 1.3.6.1.4.1.2011.6.139.3.1.1.12
A threshold standard, which judges whether a frame need to retry to send or discard, gives an utmost times to retry to send a short frame packet from the MAC layer. A short frame means the lenth of the frame doesn't preponderate over the RTS/CTS threshold. Once the times to retry to send a short frame from MAC layer preponderates over the frame retry times, the frame would be discarded. The range of the short frame retry times is from 1 to 255 times, and the default of the short frame retry times is 7 times.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwRadioLongFrameRetryTimes 1.3.6.1.4.1.2011.6.139.3.1.1.13
A threshold standard, which judges whether a frame need to retry to send or discard, gives an utmost times to retry to send a long frame packet from the MAC layer. A long frame means the lenth of the frame preponderates over the RTS/CTS threshold. Once the times to retry to send a long frame from MAC layer preponderates over the frame retry times, the frame would be discarded. The range of the long frame retry times is from 1 to 255 times, and the default of the long frame retry times is 4 times.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwRadioSupportShortPreamble 1.3.6.1.4.1.2011.6.139.3.1.1.14
A switch flag, which set the short preamble status as enable or disable, tells whether the short preamble is supported by the radio. Enable means the radio supports short preamble, disable means the radio doesn't support short preamble. Preamble, which is used to identify synchronization and the data packet that immediately follows, is a set of bits in the front of a data packet by receiver. It recommends to use short preamble, because it can make the synchronous performance of the network well. Preamble includes short preamble and normal preamble, the normal preamble usually is used at the scene compatible with some old kind of client network Adapter.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioDTIMInterval 1.3.6.1.4.1.2011.6.139.3.1.1.15
An interval uses to set the parameter of DTIM periods of a radio profile. The DTIM interval means between two DTIM beacon how much Beacons have been sended. DTIM is the abbreviation of Delivery Traffic Indication Map. AP will conserve the BTV and broadcast frames for a STA provisionally, when the STA is in the resting mode. If DTIM is included in a beacon from a ap to a sta, the ap will send the BTV and broadcast frames which have been conserved provisionally to the STA immediately. The units of the DTIM interval is beacon, the range of the DTIM interval is from 1 beacon to 255 beacons, and the default DTIM interval is 3 beacons.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwRadioBeaconInterval 1.3.6.1.4.1.2011.6.139.3.1.1.16
An interval uses to specify the number of TUs that a station should use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames. The units of the beacon interval is tu, the range of the beacon interval is from 20 tus to 1000tus, and the default beacon interval is 1000 tus. 1 tu equals to 1024 ms.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwRadioWMMProfileName 1.3.6.1.4.1.2011.6.139.3.1.1.17
A human readable string representing the name of the WMM profile. WMM means WI-FI multimedia. This is the (radio profile) model dependent WMM profile ID. The request of the WMM parofile name string in detail as follows: - The length of the radio profile name at least contain 1 Byte ASCII characters,at most contain 31 Byte ASCII characters. - Any ASCII characters value must be included from 0x20 to 0x7E. - The question mark ASCII characters can't be included . - The double quotation marks ASCII characters can't appear at the beginning and the end. - The blank ASCII characters can't follow the double quotation marks ASCII characters. - The blank ASCII characters can't appear at the beginning and the end. Notes the WMM profile name can't be binded until the corresponding WMM profile is exist.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwRadioProfileRowStatus 1.3.6.1.4.1.2011.6.139.3.1.1.18
An object is used to create or delete a radio profile. There are some restrictions of operation of the radio profile. - It needs a radio profile id for the creation of the radio profile. - A newly created row for a radio profile can't bind the node hwRadioWMMProfileName, until the corresponding hwRadioWMMProfileName have been set. - If A newly created row for a radio profile binds the node of hwRadioRateValue and hwRadioType, the value of hwRadioType must be supported radio type. - If a WMM profile have been binded to a radio profile, the radio profile can't be deleted.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwRadio80211nGuardIntervalMode 1.3.6.1.4.1.2011.6.139.3.1.1.19
The mode uses to set the guard interval which is the necessary interval to receive and dispatch wireless signal to make the communication well. Normal means it sets the normal guard interval, short means it sets the short guard interval. The default guard interval mode is normal mode. The normal guard interval is 800 ns, and the short guard interval is 400 ns. If it's is not a kind of 11n or mixed with 11n AP, you can't config the it's hwRadio80211nGuardIntervalMode value. When the AP changed to be other kinds, the value of hwRadio80211nGuardIntervalMode will change to be default value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(-1), normal(1), short(2)  

hwRadio80211nAMPDUMaxLengthExponent 1.3.6.1.4.1.2011.6.139.3.1.1.20
The limit length of an AMPDU frame. AMPDU is the abbreviation of aggregate MAC protocol data unit. In order to reduce the spending of transmission, 80211n brings forward the frames aggregate technology that it aggregates several network frames to a singlehanded 80211 frame and transmit it. There are two ways of frames aggregate, one is the AMSDU and the other is AMPDU. AMPDU means it converts every network frame to 80211 frame, then aggregates serveral 80211 frames which go to the same destination to a singlehanded frame and transmit it. The units of the AMPDU frame is Byte, the range of the AMPDU frame is from 1024 Bytes to 65535 Bytes, and the default AMPDU frame is 1024 Bytes. If it's is not a kind of 11n or mixed with 11n AP, you can't config the it's AMPDU param value. When the AP changed to be other kinds, the value of AMPDU param will change to be default value. If the AMPDU param value is set to be 65535, that means the AMPDU module is closed, and if it set to be [0,3], that will enable the AMPDU module and set the AMPDU param value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..3  

hwRadioCalibrateEnable 1.3.6.1.4.1.2011.6.139.3.1.1.21
Description.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER off(1), on(2)  

hwRadioInterfDetDevice 1.3.6.1.4.1.2011.6.139.3.1.1.22
Description.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwRadioApComInterfThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.23
Description.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwRadioApAdjInterfThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.24
Description.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwRadioStaInterfThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.25
Description.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwRadioDeviceReportDuration 1.3.6.1.4.1.2011.6.139.3.1.1.26
The reporting duration of the radio device.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 10..3600  

hwRadioRTSMode 1.3.6.1.4.1.2011.6.139.3.1.1.27
Description.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), ctsToSelf(2), rtsCts(3)  

hwRadioWifiLight 1.3.6.1.4.1.2011.6.139.3.1.1.28
Description.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER signalStrength(1), traffic(2)  

hwRadioBeamformingSwitch 1.3.6.1.4.1.2011.6.139.3.1.1.29
Description.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioWidsDevSynchronizationInt 1.3.6.1.4.1.2011.6.139.3.1.1.30
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioChannelSwitchAnnouncement 1.3.6.1.4.1.2011.6.139.3.1.1.31
Description.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioChannelSwitchMode 1.3.6.1.4.1.2011.6.139.3.1.1.32
Description.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER continueTransmitting(1), stopTransmitting(2)  

hwRadioStaAccessSignalStrengthSwitch 1.3.6.1.4.1.2011.6.139.3.1.1.33
Description.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioStaAccessSignalStrengthThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.34
Description.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwRadioBackgroundListenNeighborSwitch 1.3.6.1.4.1.2011.6.139.3.1.1.35
Description.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioBackgroundScanningServiceThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.36
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioBackgroundScanningClientThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.37
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioStaAccessRateLimitSwitch 1.3.6.1.4.1.2011.6.139.3.1.1.38
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(-1), disable(1), enable(2)  

hwRadioStaAccessRateLimitThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.39
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(-1), rate1(1), rate2(2), rate55(3), rate6(4), rate9(5), rate11(6), rate12(7), rate18(8), rate22(9), rate24(10), rate33(11), rate36(12), rate48(13), rate54(14)  

hwRadioSpectrumAnalysisScanPeriod 1.3.6.1.4.1.2011.6.139.3.1.1.40
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioSpectrumAnalysisScanInterval 1.3.6.1.4.1.2011.6.139.3.1.1.41
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioHighDenseSwitch 1.3.6.1.4.1.2011.6.139.3.1.1.42
0:disable 1:enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwRadioHighDenseMode 1.3.6.1.4.1.2011.6.139.3.1.1.43
0:low mode 1:middle mode 2:high mode
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioStaOfflineSignalStrengthSwitch 1.3.6.1.4.1.2011.6.139.3.1.1.44
0:disable 1:enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwRadioStaOfflineSignalStrengthThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.45
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -90..-20  

hwRadioStaOfflineRateLimitSwitch 1.3.6.1.4.1.2011.6.139.3.1.1.46
0:disable 1:enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwRadioStaOfflineRateThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.47
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

hwRadioDynamicAdjustPowerSwitch 1.3.6.1.4.1.2011.6.139.3.1.1.48
0:disable 1:enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwRadioLocationReportTime 1.3.6.1.4.1.2011.6.139.3.1.1.49
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioLocationScanInterval 1.3.6.1.4.1.2011.6.139.3.1.1.50
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioLocationScanPeriod 1.3.6.1.4.1.2011.6.139.3.1.1.51
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioAirTimeScheduleSwitch 1.3.6.1.4.1.2011.6.139.3.1.1.52
0:disable 1:enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwRadioCalibrateScanCycle 1.3.6.1.4.1.2011.6.139.3.1.1.53
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwRadioUacPolicyType 1.3.6.1.4.1.2011.6.139.3.1.1.54
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER users(1), channelUtilization(2)  

hwRadioUacPolicySwitch 1.3.6.1.4.1.2011.6.139.3.1.1.55
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioUacAccessThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.56
when uac policy type is users, the value range from 0 to 128, when uac policy type is channel utilization, the value range from 0 to 100.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioUacRoamThreshold 1.3.6.1.4.1.2011.6.139.3.1.1.57
when uac policy type is users, the value range from 0 to 128, when uac policy type is channel utilization, the value range from 0 to 100. the value of Roam threshold is bigger than access threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioUacHideSSIDSwitch 1.3.6.1.4.1.2011.6.139.3.1.1.58
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadio80211acGuardIntervalMode 1.3.6.1.4.1.2011.6.139.3.1.1.59
The mode uses to set the guard interval which is the necessary interval to receive and dispatch wireless signal to make the communication well. Normal means it sets the normal guard interval, short means it sets the short guard interval. The default guard interval mode is normal mode. The normal guard interval is 800 ns, and the short guard interval is 400 ns. If AP is not 11ac or mixed with 11ac, you can't config the hwRadio80211acGuardIntervalMode value. When the AP changed to be other kinds, the value of hwRadio80211acGuardIntervalMode will change to be default value.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER unknown(-1), normal(1), short(2)  

hwRadio80211acAMPDUMaxLengthExponent 1.3.6.1.4.1.2011.6.139.3.1.1.60
The limit length of an AMPDU frame. AMPDU is the abbreviation of aggregate MAC protocol data unit. In order to reduce the spending of transmission, 80211ac brings forward the frames aggregate technology that it aggregates several network frames to a singlehanded 80211 frame and transmit it. There are two ways of frames aggregate, one is the AMSDU and the other is AMPDU. AMPDU means it converts every network frame to 80211 frame, then aggregates serveral 80211 frames which go to the same destination to a singlehanded frame and transmit it. The units of the AMPDU frame is Byte, the range of the AMPDU frame is from 1024 Bytes to 65535 Bytes, and the default AMPDU frame is 1024 Bytes. If AP is not 11ac or mixed with 11ac, you can't config the AMPDU param value. When the AP changed to be other kinds, the value of AMPDU param will change to be default value. If the AMPDU param value is set to be 65535, that means the AMPDU module is closed, and if it set to be [0,7], that will enable the AMPDU module and set the AMPDU param value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 -1 | 0..7  

hwRadio80211bgBasicRateSet 1.3.6.1.4.1.2011.6.139.3.1.1.61
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hwRadio80211bgSupportRateSet 1.3.6.1.4.1.2011.6.139.3.1.1.62
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hwRadio80211aBasicRateSet 1.3.6.1.4.1.2011.6.139.3.1.1.63
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hwRadio80211aSupportRateSet 1.3.6.1.4.1.2011.6.139.3.1.1.64
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

hwRadio80211nSupportMCS 1.3.6.1.4.1.2011.6.139.3.1.1.65
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwRadio80211acSupportMcsMapMcs 1.3.6.1.4.1.2011.6.139.3.1.1.67
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hwRadioMulticastRate2G 1.3.6.1.4.1.2011.6.139.3.1.1.68
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1 | 2 | 5 | 6 | 9 | 11 | 12 | 18 | 24 | 36 | 48 | 54  

hwRadioMulticastRate5G 1.3.6.1.4.1.2011.6.139.3.1.1.69
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 6 | 9 | 12 | 18 | 24 | 36 | 48 | 54  

hwRadioLegacyStationEnable 1.3.6.1.4.1.2011.6.139.3.1.1.70
Allow legacy station access.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwRadioLocationScanChannel2G 1.3.6.1.4.1.2011.6.139.3.1.1.71
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER countrychannel(1), dcachannel(2)  

hwRadioLocationScanChannel5G 1.3.6.1.4.1.2011.6.139.3.1.1.72
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER countrychannel(1), dcachannel(2)  

hwRadioAMSDUTxEnable 1.3.6.1.4.1.2011.6.139.3.1.1.73
Send with A-MSDU.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioAMSDUTxMaxSubFrames 1.3.6.1.4.1.2011.6.139.3.1.1.74
The maximum number of sub MSDUs in a A-MSDU.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 2..15  

hwRadioManageTable 1.3.6.1.4.1.2011.6.139.3.2
Huawei radio manage table, it is aggregate of a group of management of radio, such as modification and display. The content of the table contains: radio ID, radio manage base BSSID, radio manage radio profile name, radio manage state, radio manage channel, radio manage power level, radio manage power, set radio available antenna number, set radio working channel, set radio working power level. The index of the radio management table is hwApIndex and hwRadioID, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioManageEntry

hwRadioManageEntry 1.3.6.1.4.1.2011.6.139.3.2.1
Huawei radio management table entry. The entry of the huawei radio management table, all the nodes of the huawei radio management table are been operated here. The detail of the table entry would be explained by the description of the nodes of the table. The index of the radio management table is hwApIndex and hwRadioID, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioManageEntry  

hwRadioID 1.3.6.1.4.1.2011.6.139.3.2.1.1
A exclusive identifier of a radio. The range of the radio id is from 0 to 3, and the default radio id is 0. Notes the setting of radio id must insure the radio of a AP exist.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

hwRadioMngBaseBssID 1.3.6.1.4.1.2011.6.139.3.2.1.2
You can get an effective baseBssID ,only when wlan 1 is created. Or you will get a noneffective value. BSSID identifies a minimum service set,When administrator binds a ESS to a radio, it use base BSSID and WlanID to generate a BSSID. The format of the bssid is a max address which contains 3 sets of 2 Btyes hexadecimal character join up with - character, such as 00e0-5678-12fa.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwRadioMngRadioProfileName 1.3.6.1.4.1.2011.6.139.3.2.1.3
The radio profile which is binded to this radio. The request of the radio parofile name string in detail as follows: - The length of the radio profile name at least contain 1 Byte ASCII characters,at most contain 31 Byte ASCII characters. - Any ASCII characters value must be included from 0x20 to 0x7E. - The question mark ASCII characters can't be included . - The double quotation marks ASCII characters can't appear at the beginning and the end. - The blank ASCII characters can't follow the double quotation marks ASCII characters. - The blank ASCII characters can't appear at the beginning and the end. Notes the radio profile name can't be binded until the corresponding radio profile is exist.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwRadioMngState 1.3.6.1.4.1.2011.6.139.3.2.1.4
A switch flag, which set the radio status as enable or disable, tells whether the wireless signal transmission is supported by the radio. Enable means the radio supports transmission, disable means the radio doesn't support transmission. The default setting of the wireless signal transmission is enable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioMngChannel 1.3.6.1.4.1.2011.6.139.3.2.1.5
An object uses to set the channel of a radio. The value of the channel is decided by the channel mode.Such as ,the enum value of channel is 1, 6, 11 on the condition of the 80211 b/g channel mode, the enum value of channel is 36, 40, 44, 48, 52, 56, 60, 64, 149, 153,157, 161 on the condition80 of 80211a channel mode.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwRadioMngPowerLevel 1.3.6.1.4.1.2011.6.139.3.2.1.6
An object uses to set the power level of a radio. The range of the power level of a radio is from 0 to 3. the power of power level 0 is the maximum power, the power of power level 1 is a half of the maximum power, the power of power level 2 is a quarter of the maximum power, the power of power level 3 is one of eight equal parts of the maximum power.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwRadioMngPower 1.3.6.1.4.1.2011.6.139.3.2.1.7
An object uses to display the power (in 0.01dbm) which is currently used by this radio.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioAvailableSntennaNumber 1.3.6.1.4.1.2011.6.139.3.2.1.8
An object set the available antenna number,which can close some antennas to save electric power. All means it uses all the available antenna, Num1 means it uses one of the available antennas, Num2 means it uses two of the available antennas, Num3 means it uses three of the available antennas, Num4 means it uses four of the available antennas, Num5 means it uses five of the available antennas. Notes the configured available antenna number can't be larger than the real available antenna number.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER all(1), num0(2), num1(3), num2(4), num3(5), num4(6), num5(7)  

hwRadioWorkingChannel 1.3.6.1.4.1.2011.6.139.3.2.1.9
An object uses to display the working channel which is currently used by this radio. Notes the radio working channel just can be display,but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioWorkingPowerLevel 1.3.6.1.4.1.2011.6.139.3.2.1.10
An object uses to display the working power level which is currently used by this radio. Notes the radio working power level just can be display,but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioWorkingPower 1.3.6.1.4.1.2011.6.139.3.2.1.11
An object is used to describing the working porwer (in 0.01dbm) that the radio is working on actually. You just can read it when the radio is working.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioMngChannelBandwidth 1.3.6.1.4.1.2011.6.139.3.2.1.12
An object is used to describing the bandwidth that the AP support .You can config the AP bandwidth by the hwRadioMngChannelBandwidth, but the AP may be not working on value of the your config bandwidth. you can get the actual bandwidth by hwRadioWorkingChannelBandwidth. At present, 802.11n AP supports three kinds of bandwidth listed in the enum, and 802.11a/b/g AP just only supports HT20(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ht20(1), ht40Plus(2), ht40Minus(3), ht80(4)  

hwRadioWorkingChannelBandwidth 1.3.6.1.4.1.2011.6.139.3.2.1.13
An object is used to describing the bandwidth that the AP working on actually. the value may be unknown(-1) HT20(1) HT40-plus(2) or HT40-minus(3) .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(-1), ht20(1), ht40Plus(2), ht40Minus(3), ht80(4)  

hwRadio80211nMCSValue 1.3.6.1.4.1.2011.6.139.3.2.1.14
An object is used to describing the 802.11n AP's MCS Value. The MCS means modulation and coding scheme. Tha value of MCS will changed for value of spatial streams has been changed. when spatial streams's value is 1, MCS's value may be 0 to 7, default value is 7; when spatial streams's value is 2, MCS's value may be 0 to 15, default value is 15. If it is a not 802.11n AP, don't config it's MCS value.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0..15  

hwRadioWidsWorkMode 1.3.6.1.4.1.2011.6.139.3.2.1.15
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

hwRadioMngBinded 1.3.6.1.4.1.2011.6.139.3.2.1.16
Object selects a mechanism for bind/unbind the radio-profile
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(-1), true(1), false(2)  

hwRadioDeviceDetectEnable 1.3.6.1.4.1.2011.6.139.3.2.1.17
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwRadioMaxTxPwrLvl 1.3.6.1.4.1.2011.6.139.3.2.1.18
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioPwrAttRange 1.3.6.1.4.1.2011.6.139.3.2.1.19
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioPwrAttValue 1.3.6.1.4.1.2011.6.139.3.2.1.20
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioAntennaGain 1.3.6.1.4.1.2011.6.139.3.2.1.21
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioBridgeWhitelistEnable 1.3.6.1.4.1.2011.6.139.3.2.1.22
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwRadioBridgeWhitelistName 1.3.6.1.4.1.2011.6.139.3.2.1.23
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwRadioBridgeStpSwitch 1.3.6.1.4.1.2011.6.139.3.2.1.24
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwRadioBridgeSwitch 1.3.6.1.4.1.2011.6.139.3.2.1.25
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioBridgeMode 1.3.6.1.4.1.2011.6.139.3.2.1.26
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER middle(1), root(2), leaf(3)  

hwRadioUndoBridgeWhitelist 1.3.6.1.4.1.2011.6.139.3.2.1.27
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioUserTrafficScheduler 1.3.6.1.4.1.2011.6.139.3.2.1.28
Description.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwRadioCountermeasuresMode 1.3.6.1.4.1.2011.6.139.3.2.1.29
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwRadioFrequency 1.3.6.1.4.1.2011.6.139.3.2.1.30
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER frequency2G(1), frequency5G(2)  

hwRadioCountermeasuresSwitch 1.3.6.1.4.1.2011.6.139.3.2.1.31
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioSpectrumAnalysisEnable 1.3.6.1.4.1.2011.6.139.3.2.1.32
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioWidsAttackDetEnable 1.3.6.1.4.1.2011.6.139.3.2.1.33
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioMeshWhitelistName 1.3.6.1.4.1.2011.6.139.3.2.1.34
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwRadioUndoMeshWhitelist 1.3.6.1.4.1.2011.6.139.3.2.1.35
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioMeshRole 1.3.6.1.4.1.2011.6.139.3.2.1.36
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER meshNode(1), meshPortal(2)  

hwRadioLocationEnable 1.3.6.1.4.1.2011.6.139.3.2.1.37
0: disable 1: enable.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwRadioLocationScanChannelEnable 1.3.6.1.4.1.2011.6.139.3.2.1.38
0: disable 1: enable.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwRadio80211nMulticastMCSValue 1.3.6.1.4.1.2011.6.139.3.2.1.39
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0..15  

hwRadioSpectrogramServerReportEnable 1.3.6.1.4.1.2011.6.139.3.2.1.40
0: disable 1: enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwRadioRadioMulticastRateValue 1.3.6.1.4.1.2011.6.139.3.2.1.41
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(-1), rate1(1), rate2(2), rate55(3), rate6(4), rate9(5), rate11(6), rate12(7), rate18(8), rate24(10), rate36(12), rate48(13), rate54(14)  

hwRadio11acSpatialStream 1.3.6.1.4.1.2011.6.139.3.2.1.42
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 1..3  

hwRadio11acMCSValue 1.3.6.1.4.1.2011.6.139.3.2.1.43
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0..9  

hwRadioActiveSwitch 1.3.6.1.4.1.2011.6.139.3.2.1.44
Mesh handover feature: Fat AP receive dormancy or active signal through snmp. When the signal is active, radio of fat ap is enable and send RARP packet; When the signal is dormancy, radio of fat ap is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dormancy(1), active(2)  

hwRadioCalibrateStatisicsTable 1.3.6.1.4.1.2011.6.139.3.3
Huawei radio manage table, it is aggregate of a group of operation to the containing attributes of radio calibrate counters. Such as display and cleanup. The content of the containing attributes of radio calibrate contains: radio calibrate statistic signal bad count, radio calibrate statistic calibrate power count, radio calibrate statistic calibrate channel count,radio calibrate statistic operate mode. The index of the radio calibrate statisics table is hwApIndex and hwRadioID, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioCalibrateStatisicsEntry

hwRadioCalibrateStatisicsEntry 1.3.6.1.4.1.2011.6.139.3.3.1
Huawei radio calibrate statisics entry. The entry of the huawei radio calibrate statisics table, all the nodes of the huawei radio calibrate statisics table are been operated here. The detail of the table entry would be explained by the description of the nodes of the table. The index of the radio calibrate statisics table is hwApIndex and hwRadioID, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioCalibrateStatisicsEntry  

hwRadioCalStatisSignalBadCount 1.3.6.1.4.1.2011.6.139.3.3.1.1
An object uses to display the radio calibrate statistic signal bad count. This count shall increment when a rado calibration is caused by bad signal qaulity, such as, once the rate of lost packet or conflicted packet preponderates over its threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioCalStatisCalibratePowerCount 1.3.6.1.4.1.2011.6.139.3.3.1.2
An object uses to display the radio calibrate statistic calibrate power count. This count shall increment when rado calibrates the power level of this radio.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioCalStatisCalibrateChannelCount 1.3.6.1.4.1.2011.6.139.3.3.1.3
An object uses to display the radio calibrate statistic calibrate channel count. This count shall increment when rado calibrates the channel of this radio.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioCalibrateStatisicsOperMode 1.3.6.1.4.1.2011.6.139.3.3.1.4
An object uses to set the radio calibrate statisics operation mode. Invalid means the operation is invalid, clear-statistic means it clear the radio calibrate statisics. Notes it just support clear calibrate statisics, Any other operation about this node is invalid.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER invalid(-1), clearstatistic(1)  

hwRadioAuthNeighborInfTable 1.3.6.1.4.1.2011.6.139.3.4
Huawei radio authentic neighbor information table, it is aggregate of a group of display to the authentic neighbor AP infomation of radio. The authentic neighbor AP infomation of radio to display of the table contains: authentic neighbor AP ID list, authentic neighbor AP channel list, authentic neighbor AP front attenuation list, authentic neighbor AP back attenuation list. The index of the radio authentic neighbor onformation table is hwApIndex and hwRadioID, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioAuthNeighborInfEntry

hwRadioAuthNeighborInfEntry 1.3.6.1.4.1.2011.6.139.3.4.1
Huawei radio authentic neighbor information table entry. The entry of the huawei radio authentic neighbor information table, all the nodes of the huawei radio neighbor information table are been operated here. The detail of the table entry would be explained by the description of the nodes of the table. The index of the radio authentic neighbor onformation table is hwApIndex and hwRadioID, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioAuthNeighborInfEntry  

hwAuthenticRadioNeighborAPID 1.3.6.1.4.1.2011.6.139.3.4.1.1
An object uses to display the AP ID list of the authentic neighbor ap of the radio. Any of two authentic neighbor AP ID of the list should separate with question mark.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwAuthenticRadioNeighborChannel 1.3.6.1.4.1.2011.6.139.3.4.1.2
An object uses to display the signal channel list of the authentic neighbor ap of the radio. Any of two authentic neighbor AP signal channel of the list should separate with question mark.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwAuthenticRadioNeighborFrontAttenu 1.3.6.1.4.1.2011.6.139.3.4.1.3
An object uses to display the front attenuation list of the authentic neighbor ap of the radio. Any of two authentic neighbor front attenuation of the list should separate with question mark. The front attenuation indicates the attenuation of signal which is send from the radio of the operating AP to the neighbor radio.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwAuthenticRadioNeighborBackAttenu 1.3.6.1.4.1.2011.6.139.3.4.1.4
An object uses to display the back attenuation list of the authentic neighbor ap of the radio. Any of two authentic neighbor back attenuation of the list should separate with question mark. The back attenuation indicates the attenuation of signal which is send from the neighbor radio to the radio of the operating AP .
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwAuthenticRadioNeighborSSID 1.3.6.1.4.1.2011.6.139.3.4.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioLoadBalanceGroupTable 1.3.6.1.4.1.2011.6.139.3.5
Huawei radio load balance group table, it is aggregate of a group of operation to load balance group and its parameter. it can balance the connected use number or traffic in several radios. The content of the table contains: load balance group name, load balance group mode, load balance group gap threshold, load balance group associate threshold, load balance group status, load balance group row status. The index of the load balance group table is hwLBGroupName, a load balance group name is an unique identifier to a oad balance group. The detail description about the index can refer to the node hwLBGroupName description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioLoadBalanceGroupEntry

hwRadioLoadBalanceGroupEntry 1.3.6.1.4.1.2011.6.139.3.5.1
Huawei radio load balance group table entry. The entry of the huawei radio load balance group table, all the nodes of the huawei radio load balance group table are been operated here. The detail of the table entry would be explained by the description of the nodes of the table. The index of the load balance group table is hwLBGroupName, a load balance group name is an unique identifier to a oad balance group. The detail description about the index can refer to the node hwLBGroupName description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioLoadBalanceGroupEntry  

hwLBGroupName 1.3.6.1.4.1.2011.6.139.3.5.1.1
A human readable string representing the name of the radio load balance group. The request of the radio radio load balance group name string in detail as follows: - The length of the radio profile name at least contain 1 Byte ASCII characters,at most contain 31 Byte ASCII characters. - Any ASCII characters value must be included from 0x20 to 0x7E. - The question mark ASCII characters can't be included . - The double quotation marks ASCII characters can't appear at the beginning and the end. - The blank ASCII characters can't follow the double quotation marks ASCII characters. - The blank ASCII characters can't appear at the beginning and the end.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING  

hwLBGroupMode 1.3.6.1.4.1.2011.6.139.3.5.1.2
An object to set the load balance mode of radio load balance group. Session means it adjust the radio load balance on the basis of the user numbers, traffic means it adjust the radio load balance on the basis of the traffic.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER session(1), traffic(2)  

hwLBGapThreshold 1.3.6.1.4.1.2011.6.139.3.5.1.3
When connected use number or traffic gap overreach the threshold, the balance will be effected. The units of the load balance group threshold is %, the range is from 1 to 100, and the default value is 4%.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

hwLBAssociateThreshold 1.3.6.1.4.1.2011.6.139.3.5.1.4
When the connection request number of terminal user send to AP reachs the associate threshold in one minute, and connected user number is not reach the max connect number in a radio , it must agree the user's connect request. The units of the load balance associae threshold is time, the range is from 1 to 30, and the default value is 6 times.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hwLBGroupStatus 1.3.6.1.4.1.2011.6.139.3.5.1.5
An object uses to display the load balance group status, It indicates whether the load gap is above the load balance gap threshold. unbalanced means the load balance gap of two radios preponderate over the maximum of the load balance gap. balanced means the load balance gap of two radios don't preponderate over the maximum of the load balance gap. Notes the load balance group status just can be display,but can't be modified.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unbalanced(1), balanced(2)  

hwLBGroupRowStatus 1.3.6.1.4.1.2011.6.139.3.5.1.6
Huawei radio load balance group rowstatus is used to create or delete a radio load balance group.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwRadioLoadBalanceGroupMemberTable 1.3.6.1.4.1.2011.6.139.3.6
Huawei Radio Load Banlance Group Member Table, it describes members which is added to the Radio Load Banlance Group. The content of the table contains: load balance member radio channel, load balance member radio power level, load balance member radio power, load balance member radio session number, load balance member radio traffic, load balance member radio row status. The index of the radio profile table is hwLBGroupName, hwApIndex and hwRadioID, a Load Banlance Group name is an unique identifier to a Load Banlance Group, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwLBGroupName, hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioLoadBalanceGroupMemberEntry

hwRadioLoadBalanceGroupMemberEntry 1.3.6.1.4.1.2011.6.139.3.6.1
Huawei Radio Load Banlance Group Member table entry. The entry of the huawei radio Load Banlance Group Member table, all the nodes of the huawei radio Load Banlance Group Member table are been operated here. The detail of the table entry would be explained by the description of the nodes of the table. The index of the radio profile table is hwLBGroupName, hwApIndex and hwRadioID, a Load Banlance Group name is an unique identifier to a Load Banlance Group, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwLBGroupName, hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioLoadBalanceGroupMemberEntry  

hwLBMemberRadioChannel 1.3.6.1.4.1.2011.6.139.3.6.1.1
An object uses to display the working channel which is currently used by the load balance member radio. Notes the radio working channel of the load balance member radio just can be display,but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwLBMemberRadioPowerLevel 1.3.6.1.4.1.2011.6.139.3.6.1.2
An object uses to display the working power level which is currently used by this radio. Notes the radio working power level just can be display,but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwLBMemberRadioPower 1.3.6.1.4.1.2011.6.139.3.6.1.3
An object uses to display the power which is currently used by this radio. Notes the radio power just can be display,but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwLBMemberRadioSeesionNum 1.3.6.1.4.1.2011.6.139.3.6.1.4
An object uses to display the connected user number which is currently used by this radio. Notes the radio connected user number just can be display,but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwLBMemberRadioTraffic 1.3.6.1.4.1.2011.6.139.3.6.1.5
An object uses to display the traffic which is currently used by this radio. Notes the radio traffic just can be display,but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwLBMemberRowStatus 1.3.6.1.4.1.2011.6.139.3.6.1.6
Huawei Radio Load Banlance Group Member rowstatus is used to create or delete a Radio Load Banlance Group Member.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwRadioUncontrolAPInfTable 1.3.6.1.4.1.2011.6.139.3.7
Huawei radio uncontrol ap information table,it describes the information about ap which is not authorized by AC. it is aggregate of a group of display to the uncontrol AP infomation of radio. The uncontrol AP infomation of radio to display of the table contains: uncontrol AP index, uncontrol ap bssid, the AP index of the uncontrol AP neighbor, Uncontrol AP channel, Uncontrol AP RSSI. The index of the radio uncontrol ap information table is hwUncontrolAPIndex, an uncontrol Ap index is an unique identifier to a uncontrol AP. The detail description about the index can refer to the node hwUncontrolAPIndex description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioUncontrolAPInfEntry

hwRadioUncontrolAPInfEntry 1.3.6.1.4.1.2011.6.139.3.7.1
Huawei radio uncontrol ap information table entry. The entry of the huawei radio uncontrol ap information table, all the nodes of the huawei radio uncontrol ap information table are been operated here. The detail of the table entry would be explained by the description of the nodes of the table. The index of the radio uncontrol ap information table is hwUncontrolAPIndex, an uncontrol Ap index is an unique identifier to a uncontrol AP. The detail description about the index can refer to the node hwUncontrolAPIndex description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioUncontrolAPInfEntry  

hwUncontrolAPIndex 1.3.6.1.4.1.2011.6.139.3.7.1.1
An object uses to display the index of the uncontrol ap. Notes the index of the uncontrol ap just can be display, but can't be configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwUncontrolAPBSSID 1.3.6.1.4.1.2011.6.139.3.7.1.2
An object uses to display the BSSID of uncontrol ap. BSSID identifies a minimum service set,When administrator binds a ESS to a radio, it use base BSSID and WlanID to generate a BSSID. The format of the bssid is a max address which contains 3 sets of 2 Btyes hexadecimal character join up with - character, such as 00e0-5678-12fa. Notes the BSSID of uncontrol ap just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwAuthAPIndex 1.3.6.1.4.1.2011.6.139.3.7.1.3
An object uses to display the index of the latest authentic ap. Notes the index of the latest authentic ap just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwUncontrolAPChannel 1.3.6.1.4.1.2011.6.139.3.7.1.4
An object uses to display the working channel which is currently used by the uncontrol ap. Notes the radio working channel of the uncontrol ap just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwUncontrolAPRSSI 1.3.6.1.4.1.2011.6.139.3.7.1.5
An object uses to display the the RSSI from uncontrol ap to this radio. RSSI means the signal intensity of the rceived signal. Notes the RSSI from uncontrol ap to the radio just can be display,but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwUncontrolAPSSID 1.3.6.1.4.1.2011.6.139.3.7.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioPerformanceStatTable 1.3.6.1.4.1.2011.6.139.3.8
Huawei radio performance statistic table, it is aggregate of a group of operation to the performance statistic of radio calibrate counters. Such as display and cleanup. The content of the table contains: radio received frames, radio received bytes, radio sent frames, radio sent bytes, radio sent success RTS frames, radio sent unicast frames, radio sent broadcast frames, radio sent failed frames, radio received error frames, radio received physics layer error frames, radio received CRC error frames, radio received MIC error frames, radio received key decrypt error frames, radio retry frames, radio error rate, radio channel utilization rate, radio performance Statics operate mode, radio error rate of last periods, radio received signal strength, radio down mac error frames, radio received power. The index of the radio performance statistic table is hwApIndex and hwRadioID, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioPerformanceStatEntry

hwRadioPerformanceStatEntry 1.3.6.1.4.1.2011.6.139.3.8.1
Huawei radio performance statistic table entry. The entry of the huawei radio performance statistic table, all the nodes of the huawei radio performance statistic table are been operated here. The detail of the table entry would be explained by the description of the nodes of the table. The index of the radio performance statistic table is hwApIndex and hwRadioID, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioPerformanceStatEntry  

hwRadioRcvFrames 1.3.6.1.4.1.2011.6.139.3.8.1.1
An object uses to display the counter of wireless received frames. Notes the counter of wireless received frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRcvBytes 1.3.6.1.4.1.2011.6.139.3.8.1.2
An object uses to display the counter of wireless received bytes. Notes the counter of wireless received bytes just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioSendFrames 1.3.6.1.4.1.2011.6.139.3.8.1.3
An object uses to display the counter of wireless transmitted frames. Notes the counter of wireless transmitted frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioSendBytes 1.3.6.1.4.1.2011.6.139.3.8.1.4
An object uses to display the counter of wireless transmitted bytes. Notes the counter of wireless transmitted bytes just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioSendRtsSuccess 1.3.6.1.4.1.2011.6.139.3.8.1.5
An object uses to display the counter of wireless transmitted RTS successes. Notes the counter of wireless transmitted RTS successes just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioSendUnicast 1.3.6.1.4.1.2011.6.139.3.8.1.6
An object uses to display the counter of wireless transmitted unicast frames. Notes the counter of wireless transmitted unicast frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioSendBroadcast 1.3.6.1.4.1.2011.6.139.3.8.1.7
An object uses to display the counter of wireless transmitted broadcast frames. Notes the counter of wireless transmitted broadcast frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioSendFailFrames 1.3.6.1.4.1.2011.6.139.3.8.1.8
An object uses to display the counter of wireless transmitted failure frames. Notes the counter of wireless transmitted failure frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRcvErrFrames 1.3.6.1.4.1.2011.6.139.3.8.1.9
An object uses to display the counter of wireless received error frames. Notes the counter of wireless received error frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRcvPhyErrFrames 1.3.6.1.4.1.2011.6.139.3.8.1.10
An object uses to display the counter of wireless received physical layer frames. Notes the counter of wireless received physical layer frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRcvCrcErrFrames 1.3.6.1.4.1.2011.6.139.3.8.1.11
An object uses to display the counter of received CRC error frames. CRC means the circulative redundancy code, CRC error frame is one of the FCS error frames. Notes the counter of received CRC error frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRcvMicErrFrames 1.3.6.1.4.1.2011.6.139.3.8.1.12
An object uses to display the counter of wireless received MIC error frames. Notes the counter of wireless received MIC error frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRcvKeyDecryptErrFrames 1.3.6.1.4.1.2011.6.139.3.8.1.13
An object uses to display the counter of wireless received private key and decrypt fail frames. Notes the counter of wireless received private key and decrypt fail frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRetryFrames 1.3.6.1.4.1.2011.6.139.3.8.1.14
An object uses to display the counter of wireless retry frames. Notes the counter of wireless retry frames just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioPER 1.3.6.1.4.1.2011.6.139.3.8.1.15
An object uses to display the wireless PER(packet error rate. Notes the wireless PER(packet error rate just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioChUtilizationRate 1.3.6.1.4.1.2011.6.139.3.8.1.16
An object uses to display the wireless channel utilization of the radio. Notes the wireless channel utilization of the radio just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioPerformanceStatOperMode 1.3.6.1.4.1.2011.6.139.3.8.1.17
An object uses to set the radio performance statisics operation mode. Invalid means the operation is invalid, clear-statistic means it clear the radio performance statisics. Notes it just support clear performance statisics, Any other operation about this node is invalid.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER invalid(-1), clearstatistic(1)  

hwRadioPEROfLastPeriod 1.3.6.1.4.1.2011.6.139.3.8.1.18
An object uses to display the wireless error rate of the last statistic period. Notes the wireless error rate of the last statistic period just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRcvSignalStrength 1.3.6.1.4.1.2011.6.139.3.8.1.19
An object uses to display the wireless received signal strength. Notes the wireless received signal strength just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioDownMacErrFrames 1.3.6.1.4.1.2011.6.139.3.8.1.20
An object uses to display the counter of wireless down-stream MAC error frames. Notes the counter of wireless down-stream MAC error frames just can be display, but can't be configured.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRcvPower 1.3.6.1.4.1.2011.6.139.3.8.1.21
An object uses to display the receive power of the radio. Notes the receive power of the radio just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioRcvUnicastFrames 1.3.6.1.4.1.2011.6.139.3.8.1.22
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvMngFrames 1.3.6.1.4.1.2011.6.139.3.8.1.23
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvCtrlFrames 1.3.6.1.4.1.2011.6.139.3.8.1.24
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvDataFrames 1.3.6.1.4.1.2011.6.139.3.8.1.25
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioSendMngFrames 1.3.6.1.4.1.2011.6.139.3.8.1.26
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioSendCtrlFrames 1.3.6.1.4.1.2011.6.139.3.8.1.27
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioSendDataFrames 1.3.6.1.4.1.2011.6.139.3.8.1.28
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioStaMaxSignalStrength 1.3.6.1.4.1.2011.6.139.3.8.1.29
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioStaMinSignalStrength 1.3.6.1.4.1.2011.6.139.3.8.1.30
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioStaAvgSignalStrength 1.3.6.1.4.1.2011.6.139.3.8.1.31
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioSendRate 1.3.6.1.4.1.2011.6.139.3.8.1.32
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRecvRate 1.3.6.1.4.1.2011.6.139.3.8.1.33
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioDropRate 1.3.6.1.4.1.2011.6.139.3.8.1.34
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioAirPortDhcpFrames 1.3.6.1.4.1.2011.6.139.3.8.1.35
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioAirPortEapolFrames 1.3.6.1.4.1.2011.6.139.3.8.1.36
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioAirPortPsPollFrames 1.3.6.1.4.1.2011.6.139.3.8.1.37
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioAssocRequestFrames 1.3.6.1.4.1.2011.6.139.3.8.1.38
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioAssocResponseFrames 1.3.6.1.4.1.2011.6.139.3.8.1.39
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioReassocRequestFrames 1.3.6.1.4.1.2011.6.139.3.8.1.40
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioReassocResponseFrames 1.3.6.1.4.1.2011.6.139.3.8.1.41
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioDisassocFrames 1.3.6.1.4.1.2011.6.139.3.8.1.42
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioDisauthFrames 1.3.6.1.4.1.2011.6.139.3.8.1.43
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.44
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvBytes64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.45
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioSendFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.46
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioSendBytes64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.47
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioSendRtsSuccess64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.48
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioSendUnicast64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.49
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioSendBroadcast64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.50
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioSendFailFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.51
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.52
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvPhyErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.53
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvCrcErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.54
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvMicErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.55
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvKeyDecryptErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.56
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRetryFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.57
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioDownMacErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.58
Description.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioNoise 1.3.6.1.4.1.2011.6.139.3.8.1.59
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioActualBandwidth 1.3.6.1.4.1.2011.6.139.3.8.1.60
It means actual bandwidth, include all of both the sent rate and the received rate.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioFrames 1.3.6.1.4.1.2011.6.139.3.8.1.61
It means all of both the sent frames and the received frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioSendDropFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.62
It means the sent and dropped frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioRcvDropFrames64Bits 1.3.6.1.4.1.2011.6.139.3.8.1.63
It means the received and droped frames.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwRadioChannelFreeRate 1.3.6.1.4.1.2011.6.139.3.8.1.64
It means the rate of free channel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioTxRate 1.3.6.1.4.1.2011.6.139.3.8.1.65
It means the utilization rate of sending packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioRxRate 1.3.6.1.4.1.2011.6.139.3.8.1.66
It means the utilization rate of receiving packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioChInterferenceRate 1.3.6.1.4.1.2011.6.139.3.8.1.67
It means the rate of channel interference.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioUnauthenticNeighborInfoTable 1.3.6.1.4.1.2011.6.139.3.9
Huawei radio unauthentic neighbor information table, it describes the information about the neighbor ap which is not authorized by AC. it is aggregate of a group of display to the unauthentic neighbor AP infomation of radio. The unauthentic neighbor AP infomation of radio to display of the table contains: the radio BSSID of the unauthentic neighbor ap, the radio RSSI of the unauthentic neighbor ap, the radio channel of the unauthentic neighbor ap. The index of the radio unauthentic neighbor infomation table is hwApIndex and hwRadioID, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioUnauthenticNeighborInfoEntry

hwRadioUnauthenticNeighborInfoEntry 1.3.6.1.4.1.2011.6.139.3.9.1
Huawei radio unauthentic neighbor information table entry. The entry of the huawei radio unauthentic neighbor information table, all the nodes of the huawei radio unauthentic neighbor information table are been operated here. The detail of the table entry would be explained by the description of the nodes of the table. The index of the radio unauthentic neighbor infomation table is hwApIndex and hwRadioID, an Ap index is an unique identifier to a AP, A radio ID is an unique identifier to a radio. The Ap index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApIndex and hwRadioID description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioUnauthenticNeighborInfoEntry  

hwUnauthenticRadioNeighborBSSID 1.3.6.1.4.1.2011.6.139.3.9.1.1
An object uses to display the BSSID of unauthentic neighbor ap. BSSID identifies a minimum service set,When administrator binds a ESS to a radio, it use base BSSID and WlanID to generate a BSSID. The format of the bssid is a max address which contains 3 sets of 2 Btyes hexadecimal character join up with - character, such as 00e0-5678-12fa. Notes the BSSID of unauthentic neighbor ap just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwUnauthenticRadioNeighborRSSI 1.3.6.1.4.1.2011.6.139.3.9.1.2
An object uses to display the the RSSI from unauthentic neighbor ap to this radio. RSSI means the signal intensity of the rceived signal. Notes the RSSI from unauthentic neighbor ap to the radio just can be display,but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwunauthenticRadioNeighborChannel 1.3.6.1.4.1.2011.6.139.3.9.1.3
An object uses to display the working channel which is currently used by the unauthentic neighbor ap. Notes the radio working channel of the unauthentic neighbor ap just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwUnauthenticRadioNeighborSSID 1.3.6.1.4.1.2011.6.139.3.9.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioRegionCalibrateTable 1.3.6.1.4.1.2011.6.139.3.10
Huawei global calibrate config table, the global calibrate is based on AP region.Huawei radio manage table. The content of the table contains: region calibrate startup mode, region calibrate auto time, region calibrate listen mode, region calibrate status. The index of the radio global calibrate config table is hwApRegionIndex, an Ap region index is an unique identifier to a AP region. The Ap region index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApRegionIndex description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioRegionCalibrateEntry

hwRadioRegionCalibrateEntry 1.3.6.1.4.1.2011.6.139.3.10.1
Huawei radio global calibrate config table entry. The entry of the huawei radio global calibrate config table, all the nodes of the huawei radio global calibrate config table are been operated here. The detail of the table entry would be explained by the description of the nodes of the table. The index of the radio global calibrate config table is hwApRegionIndex, an Ap region index is an unique identifier to a AP region. The Ap region index is a index import from HUAWEI-WLAN-DEVICE-MIB, the detail description about the index can refer to the node hwApRegionIndex description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioRegionCalibrateEntry  

hwRegionCalibrateStartupMode 1.3.6.1.4.1.2011.6.139.3.10.1.1
The mode uses to set the golbal calibrate startup mode.Immediate means startup immediately. Here, hwRegionCalibrateAutoTime is meanningless. Periodic means startup calibrate periodically. In accordance, hwRegionCalibrateAutoTime specify the time when startup everyday. Cancel periodic means cancel the periodically calibrate. Here, hwRegionCalibrateAutoTime is meanningless. Please refer to the description of hwRegionCalibrateAutoTime.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER immediate(1), periodic(2), cancelPeriodic(3)  

hwRegionCalibrateAutoTime 1.3.6.1.4.1.2011.6.139.3.10.1.2
An object uses to set the time when startup everyday on the basic of the periodic calibrate startup mode. Please refer to the description of hwRegionCalibrateStartupMode. Notes it just can support the hour, minute and second ,the real date can't be support and the fixed date JAN 1st 2001 changelessly must be set, when the auto startup time is been set, notwithstanding it can get the date of the auto startup time too, but the value of the date is JAN 1st 2001 changelessly.
Status: current Access: read-write
OBJECT-TYPE    
  DateAndTime  

hwRegionCalibrateListenMode 1.3.6.1.4.1.2011.6.139.3.10.1.3
A switch flag, which set the radio region calibrate listen mode as enable or disable, tells whether the listen unauthentic neighbor while calibrating is supported. Because listen unauthentic neighbor will need added time, so it as a option. enable means it listens unauthentic neighbor while calibrating, disable means it would not listen unauthentic neighbor, In this case, we can't get unauthentic neighbor information after calibrate done. Notes the setting of radio region calibrate listen mode must have the corresponding setting of the golbal calibrate startup mode, and the golbal calibrate startup mode can't be cancel-periodic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwRegionCalibrateStatus 1.3.6.1.4.1.2011.6.139.3.10.1.4
An object uses to display the status of the global calibrate.running means the global calibrate is running. stop means the global calibrate had over. Notes the status of the global calibrate just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER running(1), stop(2)  

hwBatchRadioProfileStartNumber 1.3.6.1.4.1.2011.6.139.3.11
An object uses to set the start number of the first radio profile in batch operation. The range of the first radio profile start number is from 1 to 512. Notes radio profile name is the unique identification of a radio profile, so the start number isn't the ID of the radio profile.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwBatchRadioProfileNumber 1.3.6.1.4.1.2011.6.139.3.12
An object uses to set the radio profile number which want to get in batch operation. The range of the radio profile number is from 1 to 128.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwBatchRadioProfileReturnNumber 1.3.6.1.4.1.2011.6.139.3.13
An object uses to display the radio profile number which can get in batch operation. The sum of the batch radio profile start number and the batch radio profile number should not be larger than the total radio profile number in the system, so the real batch radio profile number maybe not equal to the setting batch radio profile number. no matter how the real batch radio profile number is the batch radio profile return number. For example, the setting batch radio profile start number is 3, the setting batch radio profile number is 4 and the total radio profile number in the system is 5, the real batch radio profile number would be 2, and the batch radio profile return number must be 2, the batch radio profile return number isn't equal to the batch radio profile number, otherwise, the total radio profile number in the system is 7, the real batch radio profile number would be 4, and the batch radio profile return number must be 4 too, the batch radio profile return number is equal to the batch radio profile number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwBatchRadioProfileName 1.3.6.1.4.1.2011.6.139.3.14
An object uses to display the names of radio profiles which is in the range of batch radio profile names which are determined by the batch radio profile start number and the batch radio profile number. Any two batch radio profile names of the list should separate with question mark.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwBatchLoadBalanceGroupStartNumber 1.3.6.1.4.1.2011.6.139.3.15
An object uses to set the start number of the first load balance group in batch operation. The range of the first load balance group start number is from 1 to 4096. Notes the load balance group name is the unique identification of a load balance group, so the start number isn't the ID of the load balance group.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwBatchLoadBalanceGroupNumber 1.3.6.1.4.1.2011.6.139.3.16
An object uses to set the load balance group number which want to get in batch operation. The range of the load balance group number is from 1 to 4096.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwBatchLoadBalanceGroupReturnNumber 1.3.6.1.4.1.2011.6.139.3.17
An object uses to display the load balance group number which can get in batch operation. The sum of the batch load balance group start number and the batch load balance group number should not be larger than the total load balance group number in the system, so the real batch load balance group number maybe not equal to the setting batch load balance group number. no matter how the real batch load balance group number is the batch load balance group return number. For example, the setting batch load balance group start number is 3, the setting batch load balance group number is 4 and the total load balance group number in the system is 5, the real batch load balance group number would be 2, and the batch load balance group return number must be 2, the batch load balance group return number isn't equal to the batch load balance group number, otherwise, the total load balance group number in the system is 7, the real batch load balance group number would be 4, and the batch load balance group return number must be 4 too, the batch load balance group return number is equal to the batch load balance group number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwBatchLoadBalanceGroupName 1.3.6.1.4.1.2011.6.139.3.18
An object uses to display the names of load balance group which is in the range of batch load balance group names which are determined by the batch load balance group start number and the batch load balance group number. Any two batch load balance group names of the list should separate with question mark.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwBatchUncontrolAPStartNumber 1.3.6.1.4.1.2011.6.139.3.19
An object uses to set the start number of the first uncontrol AP in batch operation. The range of the first uncontrol AP start number is from 1 to 512. Notes the start number isn't the ID of the uncontrol AP.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwBatchUncontrolAPNumber 1.3.6.1.4.1.2011.6.139.3.20
An object uses to set the uncontrol AP number which want to get in batch operation. The range of the uncontrol AP start number is from 1 to 512.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwBatchUncontrolAPReturnNumber 1.3.6.1.4.1.2011.6.139.3.21
An object uses to display the uncontrol AP number which can get in batch operation. The sum of the batch uncontrol AP start number and the batch uncontrol AP number should not be larger than the total uncontrol AP number in the system, so the real batch uncontrol AP number maybe not equal to the setting batch uncontrol AP number. no matter how the real batch uncontrol AP number is the batch uncontrol AP return number. For example, the setting batch uncontrol AP start number is 3, the setting batch uncontrol AP number is 4 and the total uncontrol AP number in the system is 5, the real batch uncontrol AP number would be 2, and the batch uncontrol AP return number must be 2, the batch uncontrol AP return number isn't equal to the batch uncontrol AP number, otherwise, the total uncontrol AP number in the system is 7, the real batch uncontrol AP number would be 4, and the batch uncontrol AP return number must be 4 too, the batch uncontrol AP return number is equal to the batch uncontrol AP number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwBatchUncontrolAPBssid 1.3.6.1.4.1.2011.6.139.3.22
An object uses to display the the BSSID of uncontrol AP which is in the range of batch uncontrol AP BSSID which are determined by the batch uncontrol AP start number and the batch uncontrol AP BSSID. Any two batch uncontrol AP BSSID of the list should separate with question mark. BSSID identifies a minimum service set,When administrator binds a ESS to a radio, it use base BSSID and WlanID to generate a BSSID. The format of the bssid is a max address which contains 3 sets of 2 Btyes hexadecimal character join up with - character, such as 00e0-5678-12fa. Notes the BSSID of unauthentic neighbor ap just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwBatchUncontrolAPAuthNeighborIndex 1.3.6.1.4.1.2011.6.139.3.23
An object uses to display the authentic neighbor ap index of uncontrol ap which is in the range of batch uncontrol ap which are determined by the batch uncontrol ap start number and the batch uncontrol ap number. Any two authentic neighbor ap indexs of the batch uncontrol ap of the list should separate with question mark.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioNotifications 1.3.6.1.4.1.2011.6.139.3.24
OBJECT IDENTIFIER    

hwRadioNotify 1.3.6.1.4.1.2011.6.139.3.24.1
OBJECT IDENTIFIER    

hwRadioChannelChangedNotify 1.3.6.1.4.1.2011.6.139.3.24.1.1
A notification which is sent out when actual channel of radio is changed.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioSignalEnvDeteriorationNotify 1.3.6.1.4.1.2011.6.139.3.24.1.2
A notification which is sent out when radio report singal environment deterioration. The objects included with the Notification may be used to read further information using AP index ,radio ID radio PER and radio conflict rate.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioSignalEnvResumeNotify 1.3.6.1.4.1.2011.6.139.3.24.1.3
A notification which is sent out when radio report singal environment resume. The objects included with the Notification may be used to read further information using AP index and radio ID.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApMonitorModeChangedNotify 1.3.6.1.4.1.2011.6.139.3.24.1.4
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwAPCoInterfDetectedNotify 1.3.6.1.4.1.2011.6.139.3.24.1.5
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwAPCoInterfClearNotify 1.3.6.1.4.1.2011.6.139.3.24.1.6
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwNerborInterfDetectedNotify 1.3.6.1.4.1.2011.6.139.3.24.1.7
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwNeiborInterfClearNotify 1.3.6.1.4.1.2011.6.139.3.24.1.8
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwStaInterfDetectedNotify 1.3.6.1.4.1.2011.6.139.3.24.1.9
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwStaInterfClearNotify 1.3.6.1.4.1.2011.6.139.3.24.1.10
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwOtherDeviceInterfDetectedNotify 1.3.6.1.4.1.2011.6.139.3.24.1.11
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwOtherDeviceInterfClearNotify 1.3.6.1.4.1.2011.6.139.3.24.1.12
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioDownNotify 1.3.6.1.4.1.2011.6.139.3.24.1.13
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioDownRecovNotify 1.3.6.1.4.1.2011.6.139.3.24.1.14
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwWIDSDetectRogueNotify 1.3.6.1.4.1.2011.6.139.3.24.1.15
A notification which is sent out when a rogue device is found.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioNotSupportChannelNotify 1.3.6.1.4.1.2011.6.139.3.24.1.16
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioNotSupportPowerLevelNotify 1.3.6.1.4.1.2011.6.139.3.24.1.17
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioAntennaGainIsUnlawfulNotify 1.3.6.1.4.1.2011.6.139.3.24.1.18
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioPowerChangedNotify 1.3.6.1.4.1.2011.6.139.3.24.1.19
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApAccessUserNumExceedThresholdNotify 1.3.6.1.4.1.2011.6.139.3.24.1.20
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApAccessUserNumExceedThresholdRecovNotify 1.3.6.1.4.1.2011.6.139.3.24.1.21
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApRoamUserNumExceedThresholdNotify 1.3.6.1.4.1.2011.6.139.3.24.1.22
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApRoamUserNumExceedThresholdRecovNotify 1.3.6.1.4.1.2011.6.139.3.24.1.23
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApAccessChannelUtilExceedThresholdNotify 1.3.6.1.4.1.2011.6.139.3.24.1.24
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApAccessChannelUtilExceedThresholdRecovNotify 1.3.6.1.4.1.2011.6.139.3.24.1.25
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApRoamChannelUtilExceedThresholdNotify 1.3.6.1.4.1.2011.6.139.3.24.1.26
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwApRoamChannelUtilExceedThresholdRecovNotify 1.3.6.1.4.1.2011.6.139.3.24.1.27
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioUploadRemoteCaptureFileNotify 1.3.6.1.4.1.2011.6.139.3.24.1.28
Description.
Status: current Access: read-only
NOTIFICATION-TYPE    

hwRadioNotifyObjects 1.3.6.1.4.1.2011.6.139.3.24.3
OBJECT IDENTIFIER    

hwRadioActualChannel 1.3.6.1.4.1.2011.6.139.3.24.3.1
An object uses to display the actual working channel which is currently used by the radio. Notes the radio actual working channel just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwRadioConflictRate 1.3.6.1.4.1.2011.6.139.3.24.3.2
An object uses to display the wireless conflict rate of the radio. Notes the wireless conflict rate of the radio just can be display, but can't be configured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwApMonitorMode 1.3.6.1.4.1.2011.6.139.3.24.3.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwApPreMonitorMode 1.3.6.1.4.1.2011.6.139.3.24.3.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwApChannel 1.3.6.1.4.1.2011.6.139.3.24.3.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwApInterfBssid 1.3.6.1.4.1.2011.6.139.3.24.3.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwInterfStaMac 1.3.6.1.4.1.2011.6.139.3.24.3.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioDownCause 1.3.6.1.4.1.2011.6.139.3.24.3.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwInterfApChannel 1.3.6.1.4.1.2011.6.139.3.24.3.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwInterfRSSI 1.3.6.1.4.1.2011.6.139.3.24.3.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWIDSTrapInfoAPID 1.3.6.1.4.1.2011.6.139.3.24.3.11
The ID of AP that is monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWIDSTrapInfoRadioId 1.3.6.1.4.1.2011.6.139.3.24.3.12
The Radio ID of AP that is monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWIDSTrapInfoAPMAC 1.3.6.1.4.1.2011.6.139.3.24.3.13
The MAC address of AP that is monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWIDSTrapInfoRogueMAC 1.3.6.1.4.1.2011.6.139.3.24.3.14
The MAC address of the rogue device that is monitored.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwWIDSTrapInfoRogueSSId 1.3.6.1.4.1.2011.6.139.3.24.3.15
The SSID of the rogue device that is monitored.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hwWIDSTrapInfoRogueType 1.3.6.1.4.1.2011.6.139.3.24.3.16
The type of the rogue device that is monitored(1 stands for a rogue AP).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWIDSTrapInfoRogueRSSI 1.3.6.1.4.1.2011.6.139.3.24.3.17
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwWIDSTrapInfoRogueChanID 1.3.6.1.4.1.2011.6.139.3.24.3.18
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioActualChannelBandwidth 1.3.6.1.4.1.2011.6.139.3.24.3.19
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ht20(1), ht40Plus(2), ht40Minus(3)  

hwRadioActualPowerLevel 1.3.6.1.4.1.2011.6.139.3.24.3.20
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioActualAntennaGain 1.3.6.1.4.1.2011.6.139.3.24.3.21
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioLegitimateAntennaGain 1.3.6.1.4.1.2011.6.139.3.24.3.22
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioChannelChangedReason 1.3.6.1.4.1.2011.6.139.3.24.3.23
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), dfs(2), wds(3), config(4), calibrate(5), mesh(6)  

hwRadioChannelChangedReasonStr 1.3.6.1.4.1.2011.6.139.3.24.3.24
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioDownCauseStr 1.3.6.1.4.1.2011.6.139.3.24.3.25
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioUacUserNum 1.3.6.1.4.1.2011.6.139.3.24.3.26
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioPreActualChannel 1.3.6.1.4.1.2011.6.139.3.24.3.27
Actual channel before being changed. Used in channel change alarm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioPowerChangedReasonStr 1.3.6.1.4.1.2011.6.139.3.24.3.28
Radio power change reason.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioParaStatisticTable 1.3.6.1.4.1.2011.6.139.3.25
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioParaStatisticEntry

hwRadioParaStatisticEntry 1.3.6.1.4.1.2011.6.139.3.25.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioParaStatisticEntry  

hwRadioStaAveSignalStrength 1.3.6.1.4.1.2011.6.139.3.25.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioManageTable 1.3.6.1.4.1.2011.6.139.3.26
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwMacRadioManageEntry

hwMacRadioManageEntry 1.3.6.1.4.1.2011.6.139.3.26.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwMacRadioManageEntry  

hwMacRadioID 1.3.6.1.4.1.2011.6.139.3.26.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hwMacRadioMngBaseBssID 1.3.6.1.4.1.2011.6.139.3.26.1.2
You can get an effective baseBssID ,only when wlan 1 is created. Or you will get a noneffective value. BSSID identifies a minimum service set,When administrator binds a ESS to a radio, it use base BSSID and WlanID to generate a BSSID. The format of the bssid is a max address which contains 3 sets of 2 Btyes hexadecimal character join up with - character, such as 00e0-5678-12fa.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwMacRadioMngRadioProfileName 1.3.6.1.4.1.2011.6.139.3.26.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwMacRadioMngState 1.3.6.1.4.1.2011.6.139.3.26.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwMacRadioMngChannel 1.3.6.1.4.1.2011.6.139.3.26.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwMacRadioMngPowerLevel 1.3.6.1.4.1.2011.6.139.3.26.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwMacRadioMngPower 1.3.6.1.4.1.2011.6.139.3.26.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwMacRadioAvailableSntennaNumber 1.3.6.1.4.1.2011.6.139.3.26.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(1), num0(2), num1(3), num2(4), num3(5), num4(6), num5(7)  

hwMacRadioWorkingChannel 1.3.6.1.4.1.2011.6.139.3.26.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioWorkingPowerLevel 1.3.6.1.4.1.2011.6.139.3.26.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioWorkingPower 1.3.6.1.4.1.2011.6.139.3.26.1.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioMngChannelBandwidth 1.3.6.1.4.1.2011.6.139.3.26.1.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ht20(1), ht40Plus(2), ht40Minus(3), ht80(4)  

hwMacRadioWorkingChannelBandwidth 1.3.6.1.4.1.2011.6.139.3.26.1.13
Description.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(-1), ht20(1), ht40Plus(2), ht40Minus(3), ht80(4)  

hwMacRadio80211nMCSValue 1.3.6.1.4.1.2011.6.139.3.26.1.14
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwMacRadioWidsWorkMode 1.3.6.1.4.1.2011.6.139.3.26.1.15
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

hwMacRadioMngBinded 1.3.6.1.4.1.2011.6.139.3.26.1.16
Object selects a mechanism for bind/unbind the radio-profile
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknown(-1), true(1), false(2)  

hwMacRadioMaxTxPwrLvl 1.3.6.1.4.1.2011.6.139.3.26.1.18
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioPwrAttRange 1.3.6.1.4.1.2011.6.139.3.26.1.19
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioPwrAttValue 1.3.6.1.4.1.2011.6.139.3.26.1.20
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioAntennaGain 1.3.6.1.4.1.2011.6.139.3.26.1.21
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwMacRadioBridgeWhitelistEnable 1.3.6.1.4.1.2011.6.139.3.26.1.22
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwMacRadioBridgeWhitelistName 1.3.6.1.4.1.2011.6.139.3.26.1.23
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..31)  

hwMacRadioBridgeStpSwitch 1.3.6.1.4.1.2011.6.139.3.26.1.24
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwMacRadioBridgeSwitch 1.3.6.1.4.1.2011.6.139.3.26.1.25
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwMacRadioBridgeMode 1.3.6.1.4.1.2011.6.139.3.26.1.26
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER middle(1), root(2), leaf(3)  

hwMacRadioUndoBridgeWhitelist 1.3.6.1.4.1.2011.6.139.3.26.1.27
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwMacRadioUserTrafficScheduler 1.3.6.1.4.1.2011.6.139.3.26.1.28
Description.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hwMacRadioCountermeasuresMode 1.3.6.1.4.1.2011.6.139.3.26.1.29
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwMacRadioFrequency 1.3.6.1.4.1.2011.6.139.3.26.1.30
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER frequency2G(1), frequency5G(2)  

hwMacRadioCountermeasuresSwitch 1.3.6.1.4.1.2011.6.139.3.26.1.31
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwMacRadioSpectrumAnalysisEnable 1.3.6.1.4.1.2011.6.139.3.26.1.32
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwMACRadioWidsAttackDetEnable 1.3.6.1.4.1.2011.6.139.3.26.1.33
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwMacRadioMeshWhitelistName 1.3.6.1.4.1.2011.6.139.3.26.1.34
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwMacUndoMeshWhitelist 1.3.6.1.4.1.2011.6.139.3.26.1.35
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwMacRadioMeshRole 1.3.6.1.4.1.2011.6.139.3.26.1.36
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER meshNode(1), meshPortal(2)  

hwMacRadioLocationEnable 1.3.6.1.4.1.2011.6.139.3.26.1.37
0: disable 1: enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwMacRadioLocationScanChannelEnable 1.3.6.1.4.1.2011.6.139.3.26.1.38
0: disable 1: enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwMacRadio80211nMulticastMCSValue 1.3.6.1.4.1.2011.6.139.3.26.1.39
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwMacRadioSpectrogramServerReportEnable 1.3.6.1.4.1.2011.6.139.3.26.1.40
0: disable 1: enable
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwMacRadioMulticastRateValue 1.3.6.1.4.1.2011.6.139.3.26.1.41
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER unknow(-1), rate1(1), rate2(2), rate55(3), rate6(4), rate9(5), rate11(6), rate12(7), rate18(8), rate24(10), rate36(12), rate48(13), rate54(14)  

hwMacRadio11acSpatialStream 1.3.6.1.4.1.2011.6.139.3.26.1.42
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 1..3  

hwMacRadio11acMCSValue 1.3.6.1.4.1.2011.6.139.3.26.1.43
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -1 | 0..9  

hwMacRadioActiveSwitch 1.3.6.1.4.1.2011.6.139.3.26.1.44
Mesh handover feature: Fat AP receive dormancy or active signal through snmp. When the signal is active, radio of fat ap is enable and send RARP packet; When the signal is dormancy, radio of fat ap is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dormancy(1), active(2)  

hwMacRadioCalibrateStatisicsTable 1.3.6.1.4.1.2011.6.139.3.27
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwMacRadioCalibrateStatisicsEntry

hwMacRadioCalibrateStatisicsEntry 1.3.6.1.4.1.2011.6.139.3.27.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwMacRadioCalibrateStatisicsEntry  

hwMacRadioCalStatisSignalBadCount 1.3.6.1.4.1.2011.6.139.3.27.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioCalStatisCalibratePowerCount 1.3.6.1.4.1.2011.6.139.3.27.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioCalStatisCalibrateChannelCount 1.3.6.1.4.1.2011.6.139.3.27.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioCalibrateStatisicsOperMode 1.3.6.1.4.1.2011.6.139.3.27.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER invalid(-1), clearstatistic(1)  

hwMacRadioAuthNeighborInfTable 1.3.6.1.4.1.2011.6.139.3.28
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwMacRadioAuthNeighborInfEntry

hwMacRadioAuthNeighborInfEntry 1.3.6.1.4.1.2011.6.139.3.28.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwMacRadioAuthNeighborInfEntry  

hwMacAuthenticRadioNeighborAPID 1.3.6.1.4.1.2011.6.139.3.28.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacAuthenticRadioNeighborChannel 1.3.6.1.4.1.2011.6.139.3.28.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacAuthenticRadioNeighborFrontAttenu 1.3.6.1.4.1.2011.6.139.3.28.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacAuthenticRadioNeighborBackAttenu 1.3.6.1.4.1.2011.6.139.3.28.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacAuthenticRadioNeighborAPMac 1.3.6.1.4.1.2011.6.139.3.28.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacAuthenticRadioNeighborSSID 1.3.6.1.4.1.2011.6.139.3.28.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacRadioLoadBalanceGroupMemberTable 1.3.6.1.4.1.2011.6.139.3.29
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwMacRadioLoadBalanceGroupMemberEntry

hwMacRadioLoadBalanceGroupMemberEntry 1.3.6.1.4.1.2011.6.139.3.29.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwMacRadioLoadBalanceGroupMemberEntry  

hwMacLBMemberRadioChannel 1.3.6.1.4.1.2011.6.139.3.29.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacLBMemberRadioPowerLevel 1.3.6.1.4.1.2011.6.139.3.29.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacLBMemberRadioPower 1.3.6.1.4.1.2011.6.139.3.29.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacLBMemberRadioSeesionNum 1.3.6.1.4.1.2011.6.139.3.29.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacLBMemberRadioTraffic 1.3.6.1.4.1.2011.6.139.3.29.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacLBMemberRowStatus 1.3.6.1.4.1.2011.6.139.3.29.1.6
Description.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hwMacRadioPerformanceStatTable 1.3.6.1.4.1.2011.6.139.3.30
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwMacRadioPerformanceStatEntry

hwMacRadioPerformanceStatEntry 1.3.6.1.4.1.2011.6.139.3.30.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwMacRadioPerformanceStatEntry  

hwMacRadioRcvFrames 1.3.6.1.4.1.2011.6.139.3.30.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRcvBytes 1.3.6.1.4.1.2011.6.139.3.30.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioSendFrames 1.3.6.1.4.1.2011.6.139.3.30.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioSendBytes 1.3.6.1.4.1.2011.6.139.3.30.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioSendRtsSuccess 1.3.6.1.4.1.2011.6.139.3.30.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioSendUnicast 1.3.6.1.4.1.2011.6.139.3.30.1.6
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioSendBroadcast 1.3.6.1.4.1.2011.6.139.3.30.1.7
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioSendFailFrames 1.3.6.1.4.1.2011.6.139.3.30.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRcvErrFrames 1.3.6.1.4.1.2011.6.139.3.30.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRcvPhyErrFrames 1.3.6.1.4.1.2011.6.139.3.30.1.10
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRcvCrcErrFrames 1.3.6.1.4.1.2011.6.139.3.30.1.11
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRcvMicErrFrames 1.3.6.1.4.1.2011.6.139.3.30.1.12
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRcvKeyDecryptErrFrames 1.3.6.1.4.1.2011.6.139.3.30.1.13
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRetryFrames 1.3.6.1.4.1.2011.6.139.3.30.1.14
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioPER 1.3.6.1.4.1.2011.6.139.3.30.1.15
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioChUtilizationRate 1.3.6.1.4.1.2011.6.139.3.30.1.16
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioPerformanceStatOperMode 1.3.6.1.4.1.2011.6.139.3.30.1.17
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER invalid(-1), clearstatistic(1)  

hwMacRadioPEROfLastPeriod 1.3.6.1.4.1.2011.6.139.3.30.1.18
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRcvSignalStrength 1.3.6.1.4.1.2011.6.139.3.30.1.19
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioDownMacErrFrames 1.3.6.1.4.1.2011.6.139.3.30.1.20
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRcvPower 1.3.6.1.4.1.2011.6.139.3.30.1.21
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioRcvUnicastFrames 1.3.6.1.4.1.2011.6.139.3.30.1.22
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvMngFrames 1.3.6.1.4.1.2011.6.139.3.30.1.23
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvCtrlFrames 1.3.6.1.4.1.2011.6.139.3.30.1.24
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvDataFrames 1.3.6.1.4.1.2011.6.139.3.30.1.25
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioSendMngFrames 1.3.6.1.4.1.2011.6.139.3.30.1.26
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioSendCtrlFrames 1.3.6.1.4.1.2011.6.139.3.30.1.27
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioSendDataFrames 1.3.6.1.4.1.2011.6.139.3.30.1.28
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioStaMaxSignalStrength 1.3.6.1.4.1.2011.6.139.3.30.1.29
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioStaMinSignalStrength 1.3.6.1.4.1.2011.6.139.3.30.1.30
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioStaAvgSignalStrength 1.3.6.1.4.1.2011.6.139.3.30.1.31
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioSendRate 1.3.6.1.4.1.2011.6.139.3.30.1.32
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRecvRate 1.3.6.1.4.1.2011.6.139.3.30.1.33
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioDropRate 1.3.6.1.4.1.2011.6.139.3.30.1.34
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioAirPortDhcpFrames 1.3.6.1.4.1.2011.6.139.3.30.1.35
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioAirPortEapolFrames 1.3.6.1.4.1.2011.6.139.3.30.1.36
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioAirPortPsPollFrames 1.3.6.1.4.1.2011.6.139.3.30.1.37
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioAssocRequestFrames 1.3.6.1.4.1.2011.6.139.3.30.1.38
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioAssocResponseFrames 1.3.6.1.4.1.2011.6.139.3.30.1.39
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioReassocRequestFrames 1.3.6.1.4.1.2011.6.139.3.30.1.40
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioReassocResponseFrames 1.3.6.1.4.1.2011.6.139.3.30.1.41
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioDisassocFrames 1.3.6.1.4.1.2011.6.139.3.30.1.42
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioDisauthFrames 1.3.6.1.4.1.2011.6.139.3.30.1.43
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.44
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvBytes64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.45
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioSendFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.46
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioSendBytes64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.47
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioSendRtsSuccess64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.48
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioSendUnicast64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.49
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioSendBroadcast64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.50
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioSendFailFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.51
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.52
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvPhyErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.53
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvCrcErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.54
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvMicErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.55
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvKeyDecryptErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.56
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRetryFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.57
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioDownMacErrFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.58
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioNoise 1.3.6.1.4.1.2011.6.139.3.30.1.59
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwMacRadioActualBandwidth 1.3.6.1.4.1.2011.6.139.3.30.1.60
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioFrames 1.3.6.1.4.1.2011.6.139.3.30.1.61
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioSendDropFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.62
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioRcvDropFrames64Bits 1.3.6.1.4.1.2011.6.139.3.30.1.63
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwMacRadioChannelFreeRate 1.3.6.1.4.1.2011.6.139.3.30.1.64
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioTxRate 1.3.6.1.4.1.2011.6.139.3.30.1.65
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioRxRate 1.3.6.1.4.1.2011.6.139.3.30.1.66
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioChInterferenceRate 1.3.6.1.4.1.2011.6.139.3.30.1.67
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwMacRadioUnauthenticNeighborInfoTable 1.3.6.1.4.1.2011.6.139.3.31
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwMacRadioUnauthenticNeighborInfoEntry

hwMacRadioUnauthenticNeighborInfoEntry 1.3.6.1.4.1.2011.6.139.3.31.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwMacRadioUnauthenticNeighborInfoEntry  

hwMacUnauthenticRadioNeighborBSSID 1.3.6.1.4.1.2011.6.139.3.31.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacUnauthenticRadioNeighborRSSI 1.3.6.1.4.1.2011.6.139.3.31.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacunauthenticRadioNeighborChannel 1.3.6.1.4.1.2011.6.139.3.31.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacUnauthenticRadioNeighborSSID 1.3.6.1.4.1.2011.6.139.3.31.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioInfoTable 1.3.6.1.4.1.2011.6.139.3.32
Huawei radio wireless port information table. .
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioInfoEntry

hwRadioInfoEntry 1.3.6.1.4.1.2011.6.139.3.32.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioInfoEntry  

hwRadioDecsption 1.3.6.1.4.1.2011.6.139.3.32.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioPortType 1.3.6.1.4.1.2011.6.139.3.32.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwRadioMaxMtu 1.3.6.1.4.1.2011.6.139.3.32.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioBandwidth 1.3.6.1.4.1.2011.6.139.3.32.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioMac 1.3.6.1.4.1.2011.6.139.3.32.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwRadioAdminStatus 1.3.6.1.4.1.2011.6.139.3.32.1.6
The admin status only can be 1 or 2. 1 stands for up, and 2 stands for admindown.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER up(1), admindown(2)  

hwRadioOperStatus 1.3.6.1.4.1.2011.6.139.3.32.1.7
The current status only can be 1, 2 or 3. 1 stands for up, 2 stands for down, and 3 stands for admindown.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), admindown(3)  

hwRadioLastChange 1.3.6.1.4.1.2011.6.139.3.32.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioInfoUpDownTimes 1.3.6.1.4.1.2011.6.139.3.32.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioAutoOffSwitch 1.3.6.1.4.1.2011.6.139.3.32.1.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwRadioAutoOffStartTime 1.3.6.1.4.1.2011.6.139.3.32.1.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

hwRadioAutoOffEndTime 1.3.6.1.4.1.2011.6.139.3.32.1.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

hwMacRadioInfoTable 1.3.6.1.4.1.2011.6.139.3.33
Huawei radio wireless port information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwMacRadioInfoEntry

hwMacRadioInfoEntry 1.3.6.1.4.1.2011.6.139.3.33.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwMacRadioInfoEntry  

hwMacRadioDecsption 1.3.6.1.4.1.2011.6.139.3.33.1.1
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacRadioPortType 1.3.6.1.4.1.2011.6.139.3.33.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwMacRadioMaxMtu 1.3.6.1.4.1.2011.6.139.3.33.1.3
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioBandwidth 1.3.6.1.4.1.2011.6.139.3.33.1.4
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioMac 1.3.6.1.4.1.2011.6.139.3.33.1.5
Description.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hwMacRadioAdminStatus 1.3.6.1.4.1.2011.6.139.3.33.1.6
The admin status only can be 0 or 1. 0 stands for up, and 1 stands for admindown..
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER up(1), admindown(2)  

hwMacRadioOperStatus 1.3.6.1.4.1.2011.6.139.3.33.1.7
The current status only can be 0, 1 or 2. 0 stands for up, 1 stands for down, and 2 stands for admindown..
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), admindown(3)  

hwMacRadioLastChange 1.3.6.1.4.1.2011.6.139.3.33.1.8
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioInfoUpDownTimes 1.3.6.1.4.1.2011.6.139.3.33.1.9
Description.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwMacRadioAutoOffSwitch 1.3.6.1.4.1.2011.6.139.3.33.1.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hwMacRadioAutoOffStartTime 1.3.6.1.4.1.2011.6.139.3.33.1.11
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

hwMacRadioAutoOffEndTime 1.3.6.1.4.1.2011.6.139.3.33.1.12
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

hwRadioObjects 1.3.6.1.4.1.2011.6.139.3.34
OBJECT IDENTIFIER    

hwRadioCalibrateTable 1.3.6.1.4.1.2011.6.139.3.34.1
OBJECT IDENTIFIER    

hwRadioCalibrateMode 1.3.6.1.4.1.2011.6.139.3.34.1.1
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioCalibrateTime 1.3.6.1.4.1.2011.6.139.3.34.1.2
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwRadioCalibrateManualStartup 1.3.6.1.4.1.2011.6.139.3.34.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioCalibrateCycle 1.3.6.1.4.1.2011.6.139.3.34.1.4
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hwRadioCalibratePolicy 1.3.6.1.4.1.2011.6.139.3.34.1.5
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwRadioCalibratesensitivity 1.3.6.1.4.1.2011.6.139.3.34.1.6
Description.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hwRadioGlobalCalibrateChannel2G 1.3.6.1.4.1.2011.6.139.3.34.1.7
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwRadioGlobalCalibrateChannel5G 1.3.6.1.4.1.2011.6.139.3.34.1.8
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwRadioGlobalScanChannel2G 1.3.6.1.4.1.2011.6.139.3.34.1.9
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwRadioGlobalScanChannel5G 1.3.6.1.4.1.2011.6.139.3.34.1.10
Description.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwRadioGlobalCalibrate5gBandWidth 1.3.6.1.4.1.2011.6.139.3.34.1.11
Global calibrate 5G band width.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ht20(1), ht40(2), ht80(3)  

hwRadioCalibrateAutoStartTime 1.3.6.1.4.1.2011.6.139.3.34.1.12
Auto calibrate start time.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwConnectProfileTable 1.3.6.1.4.1.2011.6.139.3.34.2
Huawei connect profile table. This table is used to create connect profile and config the element in this profile.The element include as fllows: - huawei connect profile name. - huawei connect ssid. - huawei connect peer mac. - huawei connect psk. - huawei connect distance kilo. - huawei connect distance mile. - huawei connect profile active. - huawei connect profile rowstatus.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwConnectProfileEntry

hwConnectProfileEntry 1.3.6.1.4.1.2011.6.139.3.34.2.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwConnectProfileEntry  

hwConnectProfileName 1.3.6.1.4.1.2011.6.139.3.34.2.1.1
An object is uesd to set connect profile name,if access to connect profile must through this name only. Generally,it can set 32 connect profiles and the name not samely.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..31)  

hwConnectSsid 1.3.6.1.4.1.2011.6.139.3.34.2.1.2
The string of ssid has no more than 32 character.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwConnectPeerMac 1.3.6.1.4.1.2011.6.139.3.34.2.1.3
Description.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hwConnectPskPassPhase 1.3.6.1.4.1.2011.6.139.3.34.2.1.4
An object is used to set psk for safe connect. The encrpytion tachniques only sustain wpa2-ccmp. The psk maybe 32 to 104 cryptograph character or 8 to 63 colloquial character.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hwConnectProfileActived 1.3.6.1.4.1.2011.6.139.3.34.2.1.5
An object is used to display and set connect profile's status. 0 show not connected,1 show connecting.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1  

hwConnectProfileRowStatus 1.3.6.1.4.1.2011.6.139.3.34.2.1.6
An object is used to create or delete a connect profile. There are some restrictions of operation of the connect profile. - It needs a connect profile name for the creation of the radio profile. - if hwconnect profile active value is 1,the connect profile can not delete. - if delete a connect profile,but the profile name not exist,it cannot delete.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hwRadioBasicSettingTable 1.3.6.1.4.1.2011.6.139.3.34.3
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioBasicSettingEntry

hwRadioBasicSettingEntry 1.3.6.1.4.1.2011.6.139.3.34.3.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioBasicSettingEntry  

hwApRadioID 1.3.6.1.4.1.2011.6.139.3.34.3.1.1
The index of radio parameter.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwApRadioTxPower 1.3.6.1.4.1.2011.6.139.3.34.3.1.2
An object is used to set transmittion power for wireless. The range is from 16 to 36. if not setting,the txpower is max power which the device hold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 17..36  

hwApRadioRtsThreshold 1.3.6.1.4.1.2011.6.139.3.34.3.1.3
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 64..2347  

hwConnectStatusTable 1.3.6.1.4.1.2011.6.139.3.34.4
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwConnectStatusEntry

hwConnectStatusEntry 1.3.6.1.4.1.2011.6.139.3.34.4.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwConnectStatusEntry  

hwConnectStatusPeerMac 1.3.6.1.4.1.2011.6.139.3.34.4.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwConnectStatusSsid 1.3.6.1.4.1.2011.6.139.3.34.4.1.2
Description.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hwConnectStatus 1.3.6.1.4.1.2011.6.139.3.34.4.1.3
An object is used to display connect status now. 1 shows connection, 2 shows disconnection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disconnect(1), connect(2)  

hwConnectStatusSNR 1.3.6.1.4.1.2011.6.139.3.34.4.1.4
An object is used to display the snr of current link.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectStatusNoiseFloor 1.3.6.1.4.1.2011.6.139.3.34.4.1.5
An object is used to display the noise of current link.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectStatusChannel 1.3.6.1.4.1.2011.6.139.3.34.4.1.6
An object is used to display the channel of current link.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectStatusActualTxPower 1.3.6.1.4.1.2011.6.139.3.34.4.1.7
An object is used to display the actual tx power of current link.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectStatusBeaconInterval 1.3.6.1.4.1.2011.6.139.3.34.4.1.8
An object is used to display the beacon interval of current link.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectStatusCurrentRate 1.3.6.1.4.1.2011.6.139.3.34.4.1.9
An object is used to display the rate of current link.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectStatusTxBeamforming 1.3.6.1.4.1.2011.6.139.3.34.4.1.10
An object is used to display the tx beam forming of current link.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectStatusActualCountryCode 1.3.6.1.4.1.2011.6.139.3.34.4.1.11
An object is used to display the current countrycode of current device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectStatusDistance 1.3.6.1.4.1.2011.6.139.3.34.4.1.12
An object is used to get the distance setting for the connection. The unit is 0.1 km.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectStatusCurrentRateKbps 1.3.6.1.4.1.2011.6.139.3.34.4.1.13
An object is used to display the rate of current link, the unit is Kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectStatusHtMode 1.3.6.1.4.1.2011.6.139.3.34.4.1.14
An object is used to display the HT mode of current link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ht20(1), ht40(2)  

hwConnectStatusGIMode 1.3.6.1.4.1.2011.6.139.3.34.4.1.15
An object is used to display the GI mode of current link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(1), short(2)  

hwConnectStatisticsTable 1.3.6.1.4.1.2011.6.139.3.34.5
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwConnectStatisticsEntry

hwConnectStatisticsEntry 1.3.6.1.4.1.2011.6.139.3.34.5.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwConnectStatisticsEntry  

hwConnectStatisticsPeerMac 1.3.6.1.4.1.2011.6.139.3.34.5.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwConnectRxOkUcastDataFrames 1.3.6.1.4.1.2011.6.139.3.34.5.1.2
An object is used to display the count of correct unicast Rx message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwConnectRxOkUcastDataBytes 1.3.6.1.4.1.2011.6.139.3.34.5.1.3
An object is used to display the bytes count of correct unicast Rx message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwConnectTxOkUcastDataFrames 1.3.6.1.4.1.2011.6.139.3.34.5.1.4
An object is used to display the count of correct unicast Tx message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwConnectTxOkUcastDataBytes 1.3.6.1.4.1.2011.6.139.3.34.5.1.5
An object is used to display the bytes count of correct unicast Tx message.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwConnectRxThroughput 1.3.6.1.4.1.2011.6.139.3.34.5.1.6
An object is used to display the rate of Rx message.The unit is Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwConnectTxThroughput 1.3.6.1.4.1.2011.6.139.3.34.5.1.7
An object is used to display the rate of Tx message.The unit is Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwConnectRxErrFrames 1.3.6.1.4.1.2011.6.139.3.34.5.1.8
An object is used to display the count of Rx message which is wrong.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwConnectTxErrUcastDataFrames 1.3.6.1.4.1.2011.6.139.3.34.5.1.9
An object is used to display the count of Tx message which is wrong.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwConnectUcastDataFrameTxRetryRatio 1.3.6.1.4.1.2011.6.139.3.34.5.1.10
An object is used to display the repeate message rate of unicast Tx message.The range id from 0 to 100.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwConnectOnlineTime 1.3.6.1.4.1.2011.6.139.3.34.5.1.11
An object is used to display the connection time length which connected last time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hwConnectStatisticsReset 1.3.6.1.4.1.2011.6.139.3.34.5.1.12
An object is used to reset the statistics datas of current device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1), unreset(2)  

hwConnectRateHistogramTable 1.3.6.1.4.1.2011.6.139.3.34.6
Huawei connect rate histogram table. This table is uses to display connect rate histogram.The content of the table contains:connect rate histogram TxRx,connect rate histogram rate and connect rate histogram ucast date frames.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwConnectRateHistogramEntry

hwConnectRateHistogramEntry 1.3.6.1.4.1.2011.6.139.3.34.6.1
Huawei connect rate histogram table entry. The index of the connect rate histogram table is hwConnectRateHistogramTxRx and hwconnectRateHistogramRate.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwConnectRateHistogramEntry  

hwConnectRateStatDirection 1.3.6.1.4.1.2011.6.139.3.34.6.1.1
The first index is connect rate histogram TxRx,the detail ranges as follows: - 1 express Received rate histogram of unicast data frames. - 2 express Transmit rate histogram of unicast data frames.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER txRate(1), rxRate(2)  

hwConnectRateStatRange 1.3.6.1.4.1.2011.6.139.3.34.6.1.2
The second index is connect rate histogram rate.The range as follows: - MCS0,MCS1,MCS2,MCS3,MCS4,MCS5,MCS6,MCS7,MCS8,MCS9,MCS10,MCS11,MCS12 show 0 to 12 - MCS13,MCS14,MCS15,MCS16,MCS17,MCS18,MCS19,MCS20,MCS21,MCS22,MCS23 show 13 to 23 - 32 shows rate6 from 36M to 48M - 33 shows rate4 from 18M to 24M - 34 shows rate2 from 9M to 12M - 35 shows rate0 less than 6M - 36 shows rate7 from 48M to 54M - 37 shows rate5 from 24M to 36M - 38 shows rate3 from 12M to 18M - 39 shows rate1 from 6M to 9M
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwConnectRateStatUcastDataFrames 1.3.6.1.4.1.2011.6.139.3.34.6.1.3
An object uses to display connect rate histogram ucast data frames through the connect rate histogram TxRx and the connect rate histogram rate.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwConnectAMPDUHistogramTable 1.3.6.1.4.1.2011.6.139.3.34.7
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwConnectAMPDUHistogramEntry

hwConnectAMPDUHistogramEntry 1.3.6.1.4.1.2011.6.139.3.34.7.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwConnectAMPDUHistogramEntry  

hwConnectAMPDUStatDirection 1.3.6.1.4.1.2011.6.139.3.34.7.1.1
The first index is connect AMPDU histogram TxRx,the detail ranges as follows: - 1 express Received rate histogram of unicast data frames. - 2 express Transmit rate histogram of unicast data frames.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER txAMPDU(1), rxAMPDU(2)  

hwConnectAMPDUStatRange 1.3.6.1.4.1.2011.6.139.3.34.7.1.2
The range is from 0 to 64.Different number make up different length of AMPDU. For example,32 express the length of AMPDU is 32.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwConnectAMPDUStatUcastDataFrames 1.3.6.1.4.1.2011.6.139.3.34.7.1.3
An object uses to display connect AMPDU ucast data frames through the connect AMPDU stat direction and the connect AMPDU stat range.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwConnectLenHistogramTable 1.3.6.1.4.1.2011.6.139.3.34.8
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwConnectLenHistogramEntry

hwConnectLenHistogramEntry 1.3.6.1.4.1.2011.6.139.3.34.8.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwConnectLenHistogramEntry  

hwConnectDataLenStatDirection 1.3.6.1.4.1.2011.6.139.3.34.8.1.1
The first index is connect datalen stat direction,the detail ranges as follows: - 1 express Received rate histogram of unicast data frames. - 2 express Transmit rate histogram of unicast data frames.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER txLen(1), rxLen(2)  

hwConnectDataLenStatLength 1.3.6.1.4.1.2011.6.139.3.34.8.1.2
The second index is connect data length.The range as follows: -0 shows 0 to 255 -1 shows 256 to 511 -2 shows 512 to 767 -3 shows 768 to 1023 -4 shows 1024 to 1279 -5 shows 1280 to 1535 -6 shows 1536 to 1791 -7 shows 1792 to 2047
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwConnectDataLenStatFrameCounts 1.3.6.1.4.1.2011.6.139.3.34.8.1.3
An object uses to display connect data length stat frame counts through the connect data length dir- ection and the connect data length.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hwConnectMaxSnrTable 1.3.6.1.4.1.2011.6.139.3.34.9
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwConnectMaxSnrEntry

hwConnectMaxSnrEntry 1.3.6.1.4.1.2011.6.139.3.34.9.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  HwConnectMaxSnrEntry  

hwConnectMaxSnrPeerMAC 1.3.6.1.4.1.2011.6.139.3.34.9.1.1
Description.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hwConnectMaxSnrValue 1.3.6.1.4.1.2011.6.139.3.34.9.1.2
An object is used to display max snr value when connection.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectMaxSnrNoiseFloor 1.3.6.1.4.1.2011.6.139.3.34.9.1.3
noise floor
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwConnectMaxSnrSSID 1.3.6.1.4.1.2011.6.139.3.34.9.1.4
neighbor ssid
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hwConnectMaxSnrTime 1.3.6.1.4.1.2011.6.139.3.34.9.1.5
last time
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hwRadioQueryPowerlevelTable 1.3.6.1.4.1.2011.6.139.3.34.10
Table for query powerlevel of the appointed AP if set channel and bandwidth.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HwRadioQueryPowerlevelEntry

hwRadioQueryPowerlevelEntry 1.3.6.1.4.1.2011.6.139.3.34.10.1
Entry for query powerlevel table .
Status: current Access: not-accessible
OBJECT-TYPE    
  HwRadioQueryPowerlevelEntry  

hwRadioQueryPowerlevelChannel 1.3.6.1.4.1.2011.6.139.3.34.10.1.1
The channel if it will be set as an index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwRadioQueryPowerlevelBandwidth 1.3.6.1.4.1.2011.6.139.3.34.10.1.2
The bandwidth if it will be set as an index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hwRadioQueryPowerlevelMax 1.3.6.1.4.1.2011.6.139.3.34.10.1.3
The result ,it shows the number of powerlevel , which begins from zero.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hwRadioConformance 1.3.6.1.4.1.2011.6.139.3.35
OBJECT IDENTIFIER    

hwRadioCompliances 1.3.6.1.4.1.2011.6.139.3.35.1
OBJECT IDENTIFIER    

hwRadioCompliance 1.3.6.1.4.1.2011.6.139.3.35.1.1
Description.
Status: current Access: read-only
MODULE-COMPLIANCE    

hwRadioObjectGroups 1.3.6.1.4.1.2011.6.139.3.35.2
OBJECT IDENTIFIER    

hwRadioProfileGroup 1.3.6.1.4.1.2011.6.139.3.35.2.1
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioManageGroup 1.3.6.1.4.1.2011.6.139.3.35.2.2
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioCalibrateStatisicsGroup 1.3.6.1.4.1.2011.6.139.3.35.2.3
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioAuthNeighborInfGroup 1.3.6.1.4.1.2011.6.139.3.35.2.4
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioLoadBalanceGroupGroup 1.3.6.1.4.1.2011.6.139.3.35.2.5
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioLoadBalanceGroupMemberGroup 1.3.6.1.4.1.2011.6.139.3.35.2.6
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioUncontrolAPInfGroup 1.3.6.1.4.1.2011.6.139.3.35.2.7
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioPerformanceStatGroup 1.3.6.1.4.1.2011.6.139.3.35.2.8
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioUnauthenticNeighborInfoGroup 1.3.6.1.4.1.2011.6.139.3.35.2.9
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioRegionCalibrateGroup 1.3.6.1.4.1.2011.6.139.3.35.2.10
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioGlobalGroup 1.3.6.1.4.1.2011.6.139.3.35.2.11
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioNotifyGroup 1.3.6.1.4.1.2011.6.139.3.35.2.12
Description.
Status: current Access: read-only
NOTIFICATION-GROUP    

hwRadioNotifyObjectGroup 1.3.6.1.4.1.2011.6.139.3.35.2.13
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioParaStatisticGroup 1.3.6.1.4.1.2011.6.139.3.35.2.14
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwMacRadioManageGroup 1.3.6.1.4.1.2011.6.139.3.35.2.15
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwMacRadioCalibrateStatisicsGroup 1.3.6.1.4.1.2011.6.139.3.35.2.16
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwMacRadioAuthNeighborInfGroup 1.3.6.1.4.1.2011.6.139.3.35.2.17
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwMacRadioLoadBalanceGroupMemberGroup 1.3.6.1.4.1.2011.6.139.3.35.2.18
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwMacRadioPerformanceStatGroup 1.3.6.1.4.1.2011.6.139.3.35.2.19
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwMacRadioUnauthenticNeighborInfoGroup 1.3.6.1.4.1.2011.6.139.3.35.2.20
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioInfoGroup 1.3.6.1.4.1.2011.6.139.3.35.2.21
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwMacRadioInfoGroup 1.3.6.1.4.1.2011.6.139.3.35.2.22
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwRadioCalibrateGroup 1.3.6.1.4.1.2011.6.139.3.35.2.23
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwConnectStatusGroup 1.3.6.1.4.1.2011.6.139.3.35.2.24
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwConnectStatisticsGruop 1.3.6.1.4.1.2011.6.139.3.35.2.25
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwConnectRateHistogramGruop 1.3.6.1.4.1.2011.6.139.3.35.2.26
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwConnectAMPDUHistogramGruop 1.3.6.1.4.1.2011.6.139.3.35.2.27
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwConnectLenHistogramGruop 1.3.6.1.4.1.2011.6.139.3.35.2.28
Description.
Status: current Access: read-only
OBJECT-GROUP    

hwConnectMaxSnrGruop 1.3.6.1.4.1.2011.6.139.3.35.2.29
Description.
Status: current Access: read-only
OBJECT-GROUP