I2000-V1
File:
I2000-V1.mib (45377 bytes)
Imported modules
Imported symbols
Defined Values
iMAP |
1.3.6.1.4.1.2011 |
OBJECT IDENTIFIER |
|
|
|
products |
1.3.6.1.4.1.2011.2 |
OBJECT IDENTIFIER |
|
|
|
iMAPNorthboundHeartbeatSystemLabel |
1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.1 |
Managed system ID: indicates the managed system from which the heartbeat notification is reported.
It uniquely identifies one EMS. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundHeartbeatPeriod |
1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.2 |
Heartbeat period (must be between 3 and 300), in seconds |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundHeartbeatTimeStamp |
1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.3 |
Time stamp: the time when the heartbeat notification trap is generated |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundHeartbeatSvcReportInterval |
1.3.6.1.4.1.2011.2.15.2.1.3.1.1 |
Accepts integral values in the range 3-300 (both end inclusive)
Sets heartbeat interval to the value supplied. A heart beat is sent immediately consisting of changed interval.
Attempt to set with invalid value results in error. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
3..300 |
|
iMAPNorthboundAlarmQuery |
1.3.6.1.4.1.2011.2.15.2.4.1.5 |
Accepts only values 0 and 1 (single character)
Attempt to set any other value returns error
1-> starts query active alarm process (if previous query alarm process is in progress then error is returned)
0-> stops the previous query active alarm process in progress (if any)
|
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmCSN |
1.3.6.1.4.1.2011.2.15.2.4.3.3.1 |
Serial number of an alarm > 0.
An alarm is identified by a unique number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmCategory |
1.3.6.1.4.1.2011.2.15.2.4.3.3.2 |
Category can be one of the following:
1 - Fault
2 - Clear
3 - Event
4 - Acknowledge
5 - Unacknowledge
9 - Change
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmOccurTime |
1.3.6.1.4.1.2011.2.15.2.4.3.3.3 |
Fault occurrence time, time at which the alarm has been raised |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmMOName |
1.3.6.1.4.1.2011.2.15.2.4.3.3.4 |
Managed object name for which the alarm has been raised |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmProductID |
1.3.6.1.4.1.2011.2.15.2.4.3.3.5 |
Product type ID:
1 - transmission
2 - mobile
3 - fixed network narrowband
4 - fixed network broadband
5 - intelligent network
6 - omc |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
transmission(1), mobile(2), fixedNetworkNarrow(3), bandFixedBand(4), intelligence(5), omc(6) |
|
iMAPNorthboundAlarmNEType |
1.3.6.1.4.1.2011.2.15.2.4.3.3.6 |
Network Element Type ID |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmNEDevID |
1.3.6.1.4.1.2011.2.15.2.4.3.3.7 |
Network Element or Device ID |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmDevCsn |
1.3.6.1.4.1.2011.2.15.2.4.3.3.8 |
Device Serial number of the alarm device, unique in the same NE. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmID |
1.3.6.1.4.1.2011.2.15.2.4.3.3.9 |
Alarm ID for the raised alarm |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmType |
1.3.6.1.4.1.2011.2.15.2.4.3.3.10 |
Alarm type. It can be one of the following:
1 - Power System
2 - Environment System
3 - Signaling System
4 - Trunk System
5 - Hardware System
6 - Software System
7 - Running System
8 - Communication System
9 - QoS
10 - Processing error
11 - OMC |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmLevel |
1.3.6.1.4.1.2011.2.15.2.4.3.3.11 |
Level is the alarm severity. It can be one of the following:
1 - Critical
2 - Major
3 - Minor
4 - Warning
6 - Cleared |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
critical(1), major(2), minor(3), warning(4), cleared(6) |
|
iMAPNorthboundAlarmRestore |
1.3.6.1.4.1.2011.2.15.2.4.3.3.12 |
Alarm clear status
1 - Cleared
2 - Uncleared |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
cleared(1), uncleared(2) |
|
iMAPNorthboundAlarmConfirm |
1.3.6.1.4.1.2011.2.15.2.4.3.3.13 |
Alarm acknowledgement status
1 - Acknowledged
2 - Unacknowledged |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
acknowledged(1), unacknowledged(2) |
|
iMAPNorthboundAlarmAckTime |
1.3.6.1.4.1.2011.2.15.2.4.3.3.14 |
Alarm acknowledgement time |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmOperator |
1.3.6.1.4.1.2011.2.15.2.4.3.3.16 |
Operator, who performs the acknowledgement and clearance operations. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmParas1 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.17 |
Reserved field 1 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmParas2 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.18 |
Reserved field 2 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmParas3 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.19 |
Reserved field 3 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmParas4 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.20 |
Reserved field 4 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmParas5 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.21 |
Reserved field 5 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmParas6 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.22 |
Reserved field 6 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmParas7 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.23 |
Reserved field 7 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmParas8 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.24 |
Reserved field 8 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmParas9 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.25 |
Reserved field 9 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmParas10 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.26 |
Reserved field 10 |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
iMAPNorthboundAlarmExtendInfo |
1.3.6.1.4.1.2011.2.15.2.4.3.3.27 |
Extended information (max: 250 characters)
Alarm extended information, including the location information of the alarm. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmProbablecause |
1.3.6.1.4.1.2011.2.15.2.4.3.3.28 |
Probable cause of the alarm (max: 250 characters) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem1 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.31 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem2 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.32 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem3 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.33 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem4 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.34 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem5 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.35 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem6 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.36 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem7 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.37 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem8 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.38 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem9 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.39 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem10 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.40 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem11 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.41 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem12 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.42 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem13 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.43 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem14 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.44 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmExtendProductItem15 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.45 |
This is one of 15 extensible alarm fields to be
reported as part of alarm information. The fields
to be reported are decided by the configuration
for the SNMP agent in file snmpsvc.xml. For
string type parameters the maximum supported
length is 250 characters. If string is longer it
will be truncated to 250 characters. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmClearOperator |
1.3.6.1.4.1.2011.2.15.2.4.3.3.46 |
The operator who cleared this alarm. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..255) |
|
iMAPNorthboundAlarmClearCategory |
1.3.6.1.4.1.2011.2.15.2.4.3.3.48 |
This specifies the Clear Category of alarms.
0
1 - ADAC (Automatically Detected Automcatically Cleared)
2 - ADMC (Automatically Detected Manually Cleared) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmClearType |
1.3.6.1.4.1.2011.2.15.2.4.3.3.49 |
This specifies the Clear Type of alarms.
0
1 - Normal Clear
2 - Restore Clear
3 - Manual Clear
4 - Configure Clear
5 - Co-relation Clear |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmAdditionalInfo |
1.3.6.1.4.1.2011.2.15.2.4.3.3.51 |
Additional Information regarding the alarm |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..250) |
|
iMAPNorthboundAlarmAcknowledge |
1.3.6.1.4.1.2011.2.15.2.4.4.1 |
Give serial number(s) of alarms to be acknowledged.
Multiple serial numbers are separated by comma(,).
Alarms serial number(s) are of type unsigned long and
incompatible types are automatically considered
as invalid serial number(s). Get attempt on this node
will result in error.
Output: Serial number(s) of alarms which could not be
acknowledged. This also contains invalid Alarm
serial number(s). If all alarms are successfully
acknowledged then output is blank. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmUnAcknowledge |
1.3.6.1.4.1.2011.2.15.2.4.5.1 |
Give serial number(s) of alarms to be unacknowledged.
Multiple serial numbers are separated by comma(,).
Alarms serial number(s) are of type unsigned long and
incompatible types are automatically considered
as invalid serial number(s). Get attempt on this node
will result in error.
Output: Serial number(s) of alarms which could not be
unacknowledged. This also contains invalid Alarm
serial number(s). If all alarms are successfully
unacknowledged then output is blank. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmClear |
1.3.6.1.4.1.2011.2.15.2.4.6.1 |
Give serial number(s) of alarms to be cleared.
Multiple serial numbers are separated by comma(,).
Alarms serial number(s)are of type unsigned long and
incompatible types are automatically considered
as invalid serial number(s). Get attempt on this node
will result in error.
Output: Serial number(s) of alarms which could not be
cleared. This also contains invalid Alarm
serial number(s). If all alarms are successfully
cleared then output is blank. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundFaultAlarmQueryEndNotificationType |
4 |
The iMAP notifies the NMS of the stop of the query.
After the NMS receives the active alarm query stop
trap, it indicates that the query ends.
The NMS triggers the stop of the query, or the query
ends after the NMS receives the active alarms. |
TRAP-TYPE |
|
|
|
iMAPNorthboundHeartbeatNotificationType |
5 |
The iMAP sends the heartbeat notification trap to the NMS
regularly each period. If the NMS receives the trap, the
connection between the NMS and the iMAP works. If not,
the connection fails. |
TRAP-TYPE |
|
|
|