IBM6611-MIB

File: IBM6611-MIB.mib (692876 bytes)

Imported modules

Imported symbols

enterprises	Counter	Gauge
TimeTicks	IpAddress	DisplayString
OBJECT-TYPE

Defined Types

IbmMainProcessorLoadEntry
SEQUENCE
	ibmMainProcessorLoadIndex	INTEGER
	ibmMainProcessorLoad	Gauge

SwVpdEntry
SEQUENCE
	swvpdIndex	INTEGER
	swvpdName	DisplayString
	swvpdPtfName	DisplayString
	swvpdVerId	INTEGER
	swvpdRelId	INTEGER
	swvpdModId	INTEGER
	swvpdFixId	INTEGER
	swvpdState	INTEGER
	swvpdAction	INTEGER
	swvpdPath	INTEGER
	swvpdDateTime	DisplayString

MacAddrFilterInfoEntry
SEQUENCE
	ibmmacAddrFilterIfIndex	INTEGER
	ibmmacAddrFilterInBcastType	INTEGER
	ibmmacAddrFilterOutBcastType	INTEGER
	ibmmacAddrFilterInFilterType	INTEGER
	ibmmacAddrFilterOutFilterType	INTEGER
	ibmmacAddrFilterInNotForwarded	Counter
	ibmmacAddrFilterOutNotForwarded	Counter
	ibmmacAddrFilterType	INTEGER

MacAddrFilterInEntry
SEQUENCE
	ibmmacAddrFilterInIfIndex	INTEGER
	ibmmacAddrFilterInSrcAddress	OCTET STRING
	ibmmacAddrFilterInSrcMask	OCTET STRING
	ibmmacAddrFilterInDestAddress	OCTET STRING
	ibmmacAddrFilterInDestMask	OCTET STRING
	ibmmacAddrFilterInType	INTEGER

MacAddrFilterOutEntry
SEQUENCE
	ibmmacAddrFilterOutIfIndex	INTEGER
	ibmmacAddrFilterOutSrcAddress	OCTET STRING
	ibmmacAddrFilterOutSrcMask	OCTET STRING
	ibmmacAddrFilterOutDestAddress	OCTET STRING
	ibmmacAddrFilterOutDestMask	OCTET STRING
	ibmmacAddrFilterOutType	INTEGER

SapFilterInfoEntry
SEQUENCE
	ibmsapFilterIfIndex	INTEGER
	ibmsapFilterInBcastType	INTEGER
	ibmsapFilterOutBcastType	INTEGER
	ibmsapFilterIn	OCTET STRING
	ibmsapFilterOut	OCTET STRING
	ibmsapFilterInNotForwarded	Counter
	ibmsapFilterOutNotForwarded	Counter
	ibmsapFilterType	INTEGER

SnapFilterInfoEntry
SEQUENCE
	ibmsnapFilterIfIndex	INTEGER
	ibmsnapFilterInFilterType	INTEGER
	ibmsnapFilterOutFilterType	INTEGER
	ibmsnapFilterInNotForwarded	Counter
	ibmsnapFilterOutNotForwarded	Counter
	ibmsnapFilterType	INTEGER

SnapFilterInEntry
SEQUENCE
	ibmsnapFilterInIfIndex	INTEGER
	ibmsnapFilterInValue	INTEGER
	ibmsnapFilterInMask	INTEGER
	ibmsnapFilterInType	INTEGER

SnapFilterOutEntry
SEQUENCE
	ibmsnapFilterOutIfIndex	INTEGER
	ibmsnapFilterOutValue	INTEGER
	ibmsnapFilterOutMask	INTEGER
	ibmsnapFilterOutType	INTEGER

RingFilterInfoEntry
SEQUENCE
	ibmringFilterIfIndex	INTEGER
	ibmringFilterInBcastType	INTEGER
	ibmringFilterOutBcastType	INTEGER
	ibmringFilterInFilterType	INTEGER
	ibmringFilterOutFilterType	INTEGER
	ibmringFilterInNotForwarded	Counter
	ibmringFilterOutNotForwarded	Counter

RingFilterInEntry
SEQUENCE
	ibmringFilterInIfIndex	INTEGER
	ibmringFilterInNumber	INTEGER
	ibmringFilterInMask	INTEGER

RingFilterOutEntry
SEQUENCE
	ibmringFilterOutIfIndex	INTEGER
	ibmringFilterOutNumber	INTEGER
	ibmringFilterOutMask	INTEGER

HopCountFilterInfoEntry
SEQUENCE
	ibmhopCountFilterIfIndex	INTEGER
	ibmhopCountFilterBcastType	INTEGER
	ibmhopCountFilterCount	INTEGER

WindowFilterInfoEntry
SEQUENCE
	ibmwindowFilterIfIndex	INTEGER
	ibmwindowFilterInBcastType	INTEGER
	ibmwindowFilterOutBcastType	INTEGER
	ibmwindowFilterInFilterType	INTEGER
	ibmwindowFilterOutFilterType	INTEGER
	ibmwindowFilterInNotForwarded	Counter
	ibmwindowFilterOutNotForwarded	Counter
	ibmwindowFilterType	INTEGER

WindowFilterInEntry
SEQUENCE
	ibmwindowFilterInIfIndex	INTEGER
	ibmwindowFilterInContents	OCTET STRING
	ibmwindowFilterInMaskString	OCTET STRING
	ibmwindowFilterInOffsetStart	DisplayString
	ibmwindowFilterInNumBytes	OCTET STRING
	ibmwindowFilterInOffset	OCTET STRING
	ibmwindowFilterInId	INTEGER
	ibmwindowFilterInType	INTEGER

WindowFilterOutEntry
SEQUENCE
	ibmwindowFilterOutIfIndex	INTEGER
	ibmwindowFilterOutContents	OCTET STRING
	ibmwindowFilterOutMaskString	OCTET STRING
	ibmwindowFilterOutOffsetStart	DisplayString
	ibmwindowFilterOutNumBytes	OCTET STRING
	ibmwindowFilterOutOffset	OCTET STRING
	ibmwindowFilterOutId	INTEGER
	ibmwindowFilterOutType	INTEGER

FiltOrderInEntry
SEQUENCE
	ibmFiltOrderInIfIndex	INTEGER
	ibmFiltOrderInPriority	INTEGER
	ibmFiltOrderInName	DisplayString
	ibmFiltOrderInType	INTEGER

FiltOrderOutEntry
SEQUENCE
	ibmFiltOrderOutIfIndex	INTEGER
	ibmFiltOrderOutPriority	INTEGER
	ibmFiltOrderOutName	DisplayString
	ibmFiltOrderOutType	INTEGER

RIFFilterInfoEntry
SEQUENCE
	ibmRIFFilterIfIndex	INTEGER
	ibmRIFFilterInBcastType	INTEGER
	ibmRIFFilterOutBcastType	INTEGER
	ibmRIFFilterInFilterType	INTEGER
	ibmRIFFilterOutFilterType	INTEGER
	ibmRIFFilterInNotForwarded	Counter
	ibmRIFFilterOutNotForwarded	Counter

RIFFilterInEntry
SEQUENCE
	ibmRIFFilterInIfIndex	INTEGER
	ibmRIFFilterInRingNumber	INTEGER
	ibmRIFFilterInRingMask	INTEGER
	ibmRIFFilterInBridgeNumber	INTEGER
	ibmRIFFilterInBridgeMask	INTEGER
	ibmRIFFilterInRouteDesignator	INTEGER

RIFFilterOutEntry
SEQUENCE
	ibmRIFFilterOutIfIndex	INTEGER
	ibmRIFFilterOutNumber	INTEGER
	ibmRIFFilterOutMask	INTEGER
	ibmRIFFilterOutBridgeNumber	INTEGER
	ibmRIFFilterOutBridgeMask	INTEGER
	ibmRIFFilterOutRouteDesignator	INTEGER

IbmfrDlcmiEntry
SEQUENCE
	ibmfrDlcmiIfIndex	INTEGER
	ibmfrDlcmiState	INTEGER
	ibmfrDlcmiAddress	INTEGER
	ibmfrDlcmiAddressLen	INTEGER
	ibmfrDlcmiPollingInterval	INTEGER
	ibmfrDlcmiFullEnquiryInterval	INTEGER
	ibmfrDlcmiErrorThreshold	INTEGER
	ibmfrDlcmiMonitoredEvents	INTEGER
	ibmfrDlcmiMaxSupportedVCs	INTEGER
	ibmfrDlcmiMulticast	INTEGER

IbmfrCircuitEntry
SEQUENCE
	ibmfrCircuitIfIndex	INTEGER
	ibmfrCircuitDlci	INTEGER
	ibmfrCircuitState	INTEGER
	ibmfrCircuitReceivedFECNs	Counter
	ibmfrCircuitReceivedBECNs	Counter
	ibmfrCircuitSentFrames	Counter
	ibmfrCircuitSentOctets	Counter
	ibmfrCircuitReceivedFrames	Counter
	ibmfrCircuitReceivedOctets	Counter
	ibmfrCircuitCreationTime	TimeTicks
	ibmfrCircuitLastTimeChange	TimeTicks
	ibmfrCircuitCommittedBurst	INTEGER
	ibmfrCircuitExcessBurst	INTEGER
	ibmfrCircuitThroughput	INTEGER

IbmfrErrEntry
SEQUENCE
	ibmfrErrIfIndex	INTEGER
	ibmfrErrType	INTEGER
	ibmfrErrData	OCTET STRING
	ibmfrErrTime	TimeTicks

IbmdlsRouterEntry
SEQUENCE
	ibmdlsRouterAddress	IpAddress
	ibmdlsRouterStatus	INTEGER
	ibmdlsRouterDefinedBy	INTEGER
	ibmdlsRouterInFrames	INTEGER
	ibmdlsRouterOutFrames	INTEGER

IbmdlsLocalFrameFilterEntry
SEQUENCE
	ibmdlsLocalFrameFilterID	INTEGER
	ibmdlsLocalFrameFilterSrcAddress	OCTET STRING
	ibmdlsLocalFrameFilterSrcMask	OCTET STRING
	ibmdlsLocalFrameFilterDestAddress	OCTET STRING
	ibmdlsLocalFrameFilterDestMask	OCTET STRING

IbmdlsRemoteFrameFilterEntry
SEQUENCE
	ibmdlsRemoteFrameFilterID	INTEGER
	ibmdlsRemoteFrameFilterSrcAddress	OCTET STRING
	ibmdlsRemoteFrameFilterSrcMask	OCTET STRING
	ibmdlsRemoteFrameFilterDestAddress	OCTET STRING
	ibmdlsRemoteFrameFilterDestMask	OCTET STRING

IbmdlsLocalNameFilterEntry
SEQUENCE
	ibmdlsLocalNameFilterID	INTEGER
	ibmdlsLocalNameFilterSrcAddress	DisplayString
	ibmdlsLocalNameFilterDestAddress	DisplayString

IbmdlsRemoteNameFilterEntry
SEQUENCE
	ibmdlsRemoteNameFilterID	INTEGER
	ibmdlsRemoteNameFilterSrcAddress	DisplayString
	ibmdlsRemoteNameFilterDestAddress	DisplayString

IbmdlsDefaultDestEntry
SEQUENCE
	ibmdlsDefaultDestAddress	OCTET STRING
	ibmdlsDefaultRouterAddress	IpAddress

IbmdlsDefaultNBDestEntry
SEQUENCE
	ibmdlsDefaultNBDestName	DisplayString
	ibmdlsDefaultNBRouterAddress	IpAddress

IbmdlsStationEntry
SEQUENCE
	ibmdlsStationIfIndex	INTEGER
	ibmdlsStationAddress	INTEGER
	ibmdlsStationTransmitWindowCount	INTEGER
	ibmdlsStationRetransmitCount	INTEGER
	ibmdlsStationRetransmitThreshold	INTEGER
	ibmdlsStationForceDisconnectTimeout	INTEGER
	ibmdlsStationMaxIfieldSize	INTEGER
	ibmdlsStationPrimaryRepollTimeout	INTEGER
	ibmdlsStationPrimaryRepollCount	INTEGER
	ibmdlsStationPrimaryRepollThreshold	INTEGER
	ibmdlsStationPrimarySlowListTimeout	INTEGER
	ibmdlsStationSrcAddress	OCTET STRING
	ibmdlsStationDestAddress	OCTET STRING

IbmdlsCirEntry
SEQUENCE
	ibmdlsCirIfIndex	INTEGER
	ibmdlsCirSrcAddress	OCTET STRING
	ibmdlsCirSrcSap	INTEGER
	ibmdlsCirDestAddress	OCTET STRING
	ibmdlsCirDestSap	INTEGER
	ibmdlsCirPartnerRouterAddress	IpAddress
	ibmdlsCirLocalLinkState	INTEGER
	ibmdlsCirLocalLinkSubState	INTEGER
	ibmdlsCirLocalLinkRouting	OCTET STRING
	ibmdlsCirLocalLinkTestCmdsSent	Counter
	ibmdlsCirLocalLinkTestCmdsFail	Counter
	ibmdlsCirLocalLinkTestCmdsRcv	Counter
	ibmdlsCirLocalLinkDataPktSent	Counter
	ibmdlsCirLocalLinkDataPktResent	Counter
	ibmdlsCirLocalLinkMaxContResent	Counter
	ibmdlsCirLocalLinkDataPktRcv	Counter
	ibmdlsCirLocalLinkInvalidPktRcv	Counter
	ibmdlsCirLocalLinkAdpRcvErr	Counter
	ibmdlsCirLocalLinkAdpSendErr	Counter
	ibmdlsCirLocalLinkRcvInactiveTimeouts	Counter
	ibmdlsCirLocalLinkCmdPollsSent	Counter
	ibmdlsCirLocalLinkCmdRepollsSent	Counter
	ibmdlsCirLocalLinkCmdContRepolls	Counter

IbmpppLinkControlEntry
SEQUENCE
	ibmpppLinkControlIndex	INTEGER
	ibmpppLinkCRCSize	INTEGER
	ibmpppLinkRestartTimerValue	INTEGER
	ibmpppLinkMaxRestarts	INTEGER
	ibmpppLinkLocalMRU	INTEGER
	ibmpppLinkRemoteMRU	INTEGER
	ibmpppLinkLocalACCMap	OCTET STRING	Size(4)
	ibmpppLinkRemoteACCMap	OCTET STRING	Size(4)
	ibmpppLinkMagicLoopCount	INTEGER
	ibmpppLinkCommand	INTEGER

IbmpppLinkStatusEntry
SEQUENCE
	ibmpppLinkStatusIndex	INTEGER
	ibmpppLinkVersion	INTEGER
	ibmpppLinkCurrentState	INTEGER
	ibmpppLinkPreviousState	INTEGER
	ibmpppLinkChangeTime	TimeTicks
	ibmpppLinkMagicNumber	INTEGER
	ibmpppLinkLocalQualityPeriod	INTEGER
	ibmpppLinkRemoteQualityPeriod	INTEGER
	ibmpppLinkProtocolCompression	INTEGER
	ibmpppLinkACCompression	INTEGER
	ibmpppLinkMeasurementsValid	INTEGER
	ibmpppLinkQuality	INTEGER
	ibmpppLinkPhysical	OBJECT IDENTIFIER

IbmpppLinkErrorsEntry
SEQUENCE
	ibmpppLinkErrorsIndex	INTEGER
	ibmpppLinkBadAddresses	Counter
	ibmpppLinkLastBadAddress	OCTET STRING
	ibmpppLinkBadControls	Counter
	ibmpppLinkLastBadControl	OCTET STRING
	ibmpppLinkLastUnknownProtocol	OCTET STRING
	ibmpppLinkInvalidProtocols	Counter
	ibmpppLinkLastInvalidProtocol	OCTET STRING
	ibmpppLinkPacketTooLongs	Counter
	ibmpppLinkBadCRCs	Counter
	ibmpppLinkConfigTimeouts	Counter
	ibmpppLinkTerminateTimeouts	Counter

IbmpppLinkQualityEntry
SEQUENCE
	ibmpppLinkQualityIndex	INTEGER
	ibmpppLinkInTxLQRs	Counter
	ibmpppLinkInTxPackets	Counter
	ibmpppLinkLastOutTxPackets	Counter
	ibmpppLinkInTxOctets	Counter
	ibmpppLinkLastOutTxOctets	Counter
	ibmpppLinkInRxPackets	Counter
	ibmpppLinkLastInRxPackets	Counter
	ibmpppLinkInRxOctets	Counter
	ibmpppLinkLastInRxOctets	Counter

IbmpppIPEntry
SEQUENCE
	ibmpppIPLinkNumber	INTEGER
	ibmpppIPRejects	Counter
	ibmpppIPInPackets	Counter
	ibmpppIPInOctets	Counter
	ibmpppIPOutPackets	Counter
	ibmpppIPOutOctets	Counter

IbmpppIPCPEntry
SEQUENCE
	ibmpppIPCPLinkNumber	INTEGER
	ibmpppIPCPRejects	Counter
	ibmpppIPCPInPackets	Counter
	ibmpppIPCPInOctets	Counter
	ibmpppIPCPOutPackets	Counter
	ibmpppIPCPOutOctets	Counter
	ibmpppIPCPCompressionType	INTEGER

IbmpppLCPEntry
SEQUENCE
	ibmpppLCPLinkNumber	INTEGER
	ibmpppLCPRejects	Counter
	ibmpppLCPInPackets	Counter
	ibmpppLCPInOctets	Counter
	ibmpppLCPOutPackets	Counter
	ibmpppLCPOutOctets	Counter
	ibmpppLCPOutCRs	Counter
	ibmpppLCPInCRs	Counter
	ibmpppLCPOutCAs	Counter
	ibmpppLCPInCAs	Counter
	ibmpppLCPOutCNs	Counter
	ibmpppLCPInCNs	Counter
	ibmpppLCPOutCRejs	Counter
	ibmpppLCPInCRejs	Counter
	ibmpppLCPOutTRs	Counter
	ibmpppLCPInTRs	Counter
	ibmpppLCPOutTAs	Counter
	ibmpppLCPInTAs	Counter
	ibmpppLCPOutCodeRejs	Counter
	ibmpppLCPInCodeRejs	Counter
	ibmpppLCPOutEchoReqs	Counter
	ibmpppLCPInEchoReqs	Counter
	ibmpppLCPOutEchoReps	Counter
	ibmpppLCPInEchoReps	Counter
	ibmpppLCPOutDiscReqs	Counter
	ibmpppLCPInDiscReqs	Counter

IbmXnsConfigEntry
SEQUENCE
	ibmxnsPortIfIndex	INTEGER
	ibmxnsPortStatus	INTEGER
	ibmxnsidpChecksum	INTEGER
	ibmxnsErrpActive	INTEGER
	ibmxnsLoopbackActive	INTEGER

IbmXnsAddrEntry
SEQUENCE
	ibmxnsAddrAddress	OCTET STRING
	ibmxnsAddrIfIndex	INTEGER

IbmXnsRouteEntry
SEQUENCE
	ibmxnsRouteDest	OCTET STRING
	ibmxnsRouteIfIndex	INTEGER
	ibmxnsRouteNextHop	OCTET STRING
	ibmxnsRouteMetric	INTEGER
	ibmxnsRouteUse	Counter

IbmXnsFilterEntry
SEQUENCE
	ibmxnsFilterIfIndex	INTEGER
	ibmxnsFilterNumber	INTEGER
	ibmxnsFilterValue	OCTET STRING
	ibmxnsFilterMask	OCTET STRING
	ibmxnsFilterType	INTEGER
	ibmxnsFilterHCCompare	INTEGER
	ibmxnsFilterUse	Counter

IbmIpxConfigEntry
SEQUENCE
	ibmipxPortIfIndex	INTEGER
	ibmipxPortStatus	INTEGER
	ibmipxidpChecksum	INTEGER
	ibmipxLoopbackActive	INTEGER

IbmIpxAddrEntry
SEQUENCE
	ibmipxAddrAddress	OCTET STRING
	ibmipxAddrIfIndex	INTEGER

IbmIpxRouteEntry
SEQUENCE
	ibmipxRouteDest	OCTET STRING
	ibmipxRouteIfIndex	INTEGER
	ibmipxRouteNextHop	OCTET STRING
	ibmipxRouteMetric	INTEGER
	ibmipxRouteUse	Counter

IbmIpxFilterEntry
SEQUENCE
	ibmipxFilterIfIndex	INTEGER
	ibmipxFilterNumber	INTEGER
	ibmipxFilterValue	OCTET STRING
	ibmipxFilterMask	OCTET STRING
	ibmipxFilterType	INTEGER
	ibmipxFilterHCCompare	INTEGER
	ibmipxFilterUse	Counter

IbmIpxsapServerEntry
SEQUENCE
	ibmipxsapServerType	INTEGER
	ibmipxsapServerNet	OCTET STRING
	ibmipxsapServerHost	OCTET STRING
	ibmipxsapServerSocket	INTEGER
	ibmipxsapServerName	DisplayString
	ibmipxsapServerAge	INTEGER
	ibmipxsapServerHops	INTEGER
	ibmipxsapServerIfIndex	INTEGER
	ibmipxsapServerIndex	INTEGER
	ibmipxsapServerRequestsFiltered	Counter

CYLINKStatusEntry
SEQUENCE
	cylinkIndex	INTEGER
	cylinkLinkState	INTEGER
	cylinkLoopback	INTEGER
	cylinkQRSS	INTEGER

CYLINKConfigEntry
SEQUENCE
	cylinkConfigIndex	INTEGER
	cylinkSerialNumber	INTEGER
	cylinkSoftwareVersion	DisplayString	Size(0..4)
	cylinkDTEFraming	INTEGER
	cylinkNetworkFraming	INTEGER
	cylinkDTEDS1Mode	INTEGER
	cylinkNetworkDS1Mode	INTEGER
	cylinkOnesResponsibility	INTEGER
	cylinkOnesControl	INTEGER
	cylinkZeroProtection	INTEGER
	cylinkClockSource	INTEGER
	cylinkClockFrequency	INTEGER
	cylinkClockBackup	INTEGER
	cylinkDIUFrequency	INTEGER
	cylinkDIUTiming	INTEGER
	cylinkDialoutCapability	INTEGER
	cylinkDialoutHoldoff	INTEGER	1..99
	cylinkPrimaryPhone	DisplayString	Size(0..19)
	cylinkSecondaryPhone	DisplayString	Size(0..19)
	cylinkAlarmRepeatTime	INTEGER	1..99
	cylinkESThreshold	INTEGER	1..99
	cylinkSecondaryContact	INTEGER

IbmDot1dBasePortEntry
SEQUENCE
	ibmdot1dBasePort	INTEGER
	ibmdot1dBasePortIfIndex	INTEGER
	ibmdot1dBasePortCircuit	OBJECT IDENTIFIER
	ibmdot1dBasePortDelayExceededDiscards	Counter
	ibmdot1dBasePortMtuExceededDiscards	Counter

IbmDot1dStpPortEntry
SEQUENCE
	ibmdot1dStpPort	INTEGER
	ibmdot1dStpPortPriority	INTEGER
	ibmdot1dStpPortState	INTEGER
	ibmdot1dStpPortEnable	INTEGER
	ibmdot1dStpPortPathCost	INTEGER
	ibmdot1dStpPortDesignatedRoot	OCTET STRING
	ibmdot1dStpPortDesignatedCost	INTEGER
	ibmdot1dStpPortDesignatedBridge	OCTET STRING
	ibmdot1dStpPortDesignatedPort	OCTET STRING
	ibmdot1dStpPortForwardTransitions	Counter

IbmDot1dTpFdbEntry
SEQUENCE
	ibmdot1dTpFdbAddress	OCTET STRING
	ibmdot1dTpFdbPort	INTEGER
	ibmdot1dTpFdbStatus	INTEGER

IbmDot1dTpPortEntry
SEQUENCE
	ibmdot1dTpPort	INTEGER
	ibmdot1dTpPortMaxInfo	INTEGER
	ibmdot1dTpPortInFrames	Counter
	ibmdot1dTpPortOutFrames	Counter
	ibmdot1dTpPortInDiscards	Counter

IbmDot1dStaticEntry
SEQUENCE
	ibmdot1dStaticAddress	OCTET STRING
	ibmdot1dStaticReceivePort	INTEGER
	ibmdot1dStaticAllowedToGoTo	OCTET STRING
	ibmdot1dStaticStatus	INTEGER

TBMacAddrFilterInfoEntry
SEQUENCE
	ibmtbmacFiltIfIndex	INTEGER
	ibmtbmacFiltInFilterType	INTEGER
	ibmtbmacFiltOutFilterType	INTEGER
	ibmtbmacFiltInNotForwarded	Counter
	ibmtbmacFiltOutNotForwarded	Counter

TBMacAddrFilterInEntry
SEQUENCE
	ibmtbmacFiltInIfIndex	INTEGER
	ibmtbmacFiltInSrcAddress	OCTET STRING
	ibmtbmacFiltInSrcMask	OCTET STRING
	ibmtbmacFiltInDestAddress	OCTET STRING
	ibmtbmacFiltInDestMask	OCTET STRING

TBMacAddrFilterOutEntry
SEQUENCE
	ibmtbmacFiltOutIfIndex	INTEGER
	ibmtbmacFiltOutSrcAddress	OCTET STRING
	ibmtbmacFiltOutSrcMask	OCTET STRING
	ibmtbmacFiltOutDestAddress	OCTET STRING
	ibmtbmacFiltOutDestMask	OCTET STRING

TBSapFilterInfoEntry
SEQUENCE
	ibmtbsapFiltIfIndex	INTEGER
	ibmtbsapFiltIn	OCTET STRING
	ibmtbsapFiltOut	OCTET STRING
	ibmtbsapFiltInNotForwarded	Counter
	ibmtbsapFiltOutNotForwarded	Counter

TBEthTypeFilterInfoEntry
SEQUENCE
	ibmtbEthTypeFiltIfIndex	INTEGER
	ibmtbEthTypeFiltInFilterType	INTEGER
	ibmtbEthTypeFiltOutFilterType	INTEGER
	ibmtbEthTypeFiltInNotForwarded	Counter
	ibmtbEthTypeFiltOutNotForwarded	Counter

TBEthTypeFilterInEntry
SEQUENCE
	ibmtbEthTypeFiltInIfIndex	INTEGER
	ibmtbEthTypeFiltInValue	OCTET STRING	Size(2)
	ibmtbEthTypeFiltInMask	OCTET STRING	Size(2)

TBEthTypeFilterOutEntry
SEQUENCE
	ibmtbEthTypeFiltOutIfIndex	INTEGER
	ibmtbEthTypeFiltOutValue	OCTET STRING	Size(2)
	ibmtbEthTypeFiltOutMask	OCTET STRING	Size(2)

TBWindowFilterInfoEntry
SEQUENCE
	ibmtbwinFiltIfIndex	INTEGER
	ibmtbwinFiltInFilterType	INTEGER
	ibmtbwinFiltOutFilterType	INTEGER
	ibmtbwinFiltInNotForwarded	Counter
	ibmtbwinFiltOutNotForwarded	Counter

TBWindowFilterInEntry
SEQUENCE
	ibmtbwinFiltInIfIndex	INTEGER
	ibmtbwinFiltInContents	OCTET STRING
	ibmtbwinFiltInMaskString	OCTET STRING
	ibmtbwinFiltInOffsetStart	DisplayString
	ibmtbwinFiltInNumBytes	OCTET STRING
	ibmtbwinFiltInOffset	OCTET STRING
	ibmtbwinFiltInId	INTEGER

TBWindowFilterOutEntry
SEQUENCE
	ibmtbwinFiltOutIfIndex	INTEGER
	ibmtbwinFiltOutContents	OCTET STRING
	ibmtbwinFiltOutMaskString	OCTET STRING
	ibmtbwinFiltOutOffsetStart	DisplayString
	ibmtbwinFiltOutNumBytes	OCTET STRING
	ibmtbwinFiltOutOffset	OCTET STRING
	ibmtbwinFiltOutId	INTEGER

TBFiltOrderInEntry
SEQUENCE
	ibmtbFiltOrderInIfIndex	INTEGER
	ibmtbFiltOrderInPriority	INTEGER
	ibmtbFiltOrderInName	DisplayString

TBFiltOrderOutEntry
SEQUENCE
	ibmtbFiltOrderOutIfIndex	INTEGER
	ibmtbFiltOrderOutPriority	INTEGER
	ibmtbFiltOrderOutName	DisplayString

SelectNetEntry
SEQUENCE
	ibmSelectNetIndex	INTEGER
	ibmSelectNetZone	OCTET STRING
	ibmSelectNetNetStart	OCTET STRING
	ibmSelectNetNetEnd	OCTET STRING
	ibmSelectNetInterfaceNetStart	OCTET STRING

AtportFilterEntry
SEQUENCE
	ibmatportFilterIndex	INTEGER
	ibmatportFilterNetStart	OCTET STRING
	ibmatportFilterNetEnd	OCTET STRING

SelectNetFilterEntry
SEQUENCE
	ibmSelectNetFilterIndex	INTEGER
	ibmSelectNetFilterNetStart	OCTET STRING
	ibmSelectNetFilterNetEnd	OCTET STRING

IbmdecLANCircuitEntry
SEQUENCE
	ibmdecLANCircuitIndex	INTEGER
	ibmdecLANCircuitType	INTEGER
	ibmdecLANCircuitSourceRoute	INTEGER
	ibmdecLANCircuitAddrType	INTEGER

IbmipPtyQueueEnableEntry
SEQUENCE
	ibmipPtyQueueEnableIfIndex	INTEGER
	ibmipPtyQueueEnable	INTEGER
	ibmipPtyQueueDefault	INTEGER

IbmipPtyQueueEntry
SEQUENCE
	ibmipPtyQueueIfIndex	INTEGER
	ibmipPtyQueuePort	INTEGER
	ibmipPtyQueueType	INTEGER
	ibmipPtyQueueNumber	INTEGER

IbmipFilterEntry
SEQUENCE
	ibmipFilterIfIndex	INTEGER
	ibmipFilterId	INTEGER
	ibmipFilterScope	INTEGER
	ibmipFilterType	INTEGER
	ibmipFilterPermitDeny	INTEGER
	ibmipFilterAddr1	IpAddress
	ibmipFilterMask1	IpAddress
	ibmipFilterAddr2	IpAddress
	ibmipFilterMask2	IpAddress

IbmipFilterExtEntry
SEQUENCE
	ibmipFilterExtIfIndex	INTEGER
	ibmipFilterExtFilterId	INTEGER
	ibmipFilterExtValue	INTEGER
	ibmipFilterExtProtocol	INTEGER

IbmPtyQueueingEntry
SEQUENCE
	ibmPtyQueueingIfIndex	INTEGER
	ibmPtyQueueingQnum	INTEGER
	ibmPtyQueueingLBA	INTEGER
	ibmPtyQueueingQBR	INTEGER
	ibmPtyQueueingDiscards	Counter

IbmTGEntry
SEQUENCE
	ibmTGProtocol	INTEGER
	ibmTGIfIndex	INTEGER
	ibmTGEnable	INTEGER
	ibmTGGroupName	DisplayString
	ibmTGSwitchOuts	Counter

IbmvNbrEntry
SEQUENCE
	ibmvNbrNetid	OCTET STRING
	ibmvNbrSubNetid	OCTET STRING
	ibmvNbrType	INTEGER
	ibmvNbrIfType	INTEGER
	ibmvNbrRemAddress	OCTET STRING
	ibmvNbrLocAddress	OCTET STRING
	ibmvNbrLocSlot	INTEGER
	ibmvNbrLocPort	INTEGER
	ibmvNbrAging	INTEGER
	ibmvNbrFlags	INTEGER
	ibmvNbrRIF	OCTET STRING
	ibmvNbrIfIndex	INTEGER
	ibmvNbrMetric	INTEGER

IbmvRtCfgInFltEntry
SEQUENCE
	ibmvRtCfgInFltNetID	OCTET STRING
	ibmvRtCfgInFltIfIndex	INTEGER
	ibmvRtCfgInFltMode	INTEGER
	ibmvRtCfgInFltUses	Counter

IbmvRtCfgOutFltEntry
SEQUENCE
	ibmvRtCfgOutFltNetID	OCTET STRING
	ibmvRtCfgOutFltIfIndex	INTEGER
	ibmvRtCfgOutFltMode	INTEGER
	ibmvRtCfgOutFltUses	Counter

IbmvRtCfgFltEntry
SEQUENCE
	ibmvRtCfgFltNetID	OCTET STRING
	ibmvRtCfgFltMode	INTEGER
	ibmvRtCfgFltUses	Counter

IbmvRtEntry
SEQUENCE
	ibmvRtNetid	OCTET STRING
	ibmvRtMetric	INTEGER
	ibmvRtIdle	INTEGER
	ibmvRtGateNetid	OCTET STRING
	ibmvRtIfIndex	INTEGER
	ibmvRtState	INTEGER

IbmvPortCfgEntry
SEQUENCE
	ibmvPortCfgIfIndex	INTEGER
	ibmvPortCfgARP	INTEGER
	ibmvPortCfgServ	INTEGER
	ibmvPortCfgHCtoServ	INTEGER
	ibmvPortCfgPerUpdate	INTEGER
	ibmvPortCfgMetric	INTEGER
	ibmvPortCfgTR	INTEGER
	ibmvPortCfgEN	INTEGER
	ibmvPortCfgInFlt	INTEGER
	ibmvPortCfgInFltNum	INTEGER
	ibmvPortCfgOutFlt	INTEGER
	ibmvPortCfgOutFltNum	INTEGER

IbmvFltEntry
SEQUENCE
	ibmvFltIfIndex	INTEGER
	ibmvFltNo	INTEGER
	ibmvFltMode	INTEGER
	ibmvFltValue	OCTET STRING
	ibmvFltMask	OCTET STRING
	ibmvFltType	INTEGER
	ibmvFltHCCompare	INTEGER
	ibmvFltUses	Counter

IbmvifEntry
SEQUENCE
	ibmvifSlot	INTEGER
	ibmvifPort	INTEGER
	ibmvifDescr	DisplayString
	ibmvifAddress	OCTET STRING
	ibmvifInPkts	Counter
	ibmvifInErrs	Counter
	ibmvifOutPkts	Counter
	ibmvifOutErrs	Counter

IbmappnNodePortEntry
SEQUENCE
	ibmappnNodePortName	DisplayString
	ibmappnNodePortState	INTEGER
	ibmappnNodePortDlcType	INTEGER
	ibmappnNodePortPortType	INTEGER
	ibmappnNodePortSIMRIM	INTEGER
	ibmappnNodePortLsRole	INTEGER
	ibmappnNodePortMaxRcvBtuSize	INTEGER
	ibmappnNodePortMaxIframeWindow	INTEGER
	ibmappnNodePortDefLsGoodXids	Counter
	ibmappnNodePortDefLsBadXids	Counter
	ibmappnNodePortDynLsGoodXids	Counter
	ibmappnNodePortDynLsBadXids	Counter
	ibmappnNodePortSpecific	OBJECT IDENTIFIER

IbmappnNodePortIpEntry
SEQUENCE
	ibmappnNodePortIpName	DisplayString
	ibmappnNodePortIpPortNum	INTEGER

IbmappnNodePortDlsEntry
SEQUENCE
	ibmappnNodePortDlsName	DisplayString
	ibmappnNodePortDlsMac	OCTET STRING
	ibmappnNodePortDlsSap	OCTET STRING

IbmappnNodePortTrEntry
SEQUENCE
	ibmappnNodePortTrName	DisplayString
	ibmappnNodePortTrMac	OCTET STRING
	ibmappnNodePortTrSap	OCTET STRING

IbmappnNodePortDlcTraceEntry
SEQUENCE
	ibmappnNodePortDlcTracPortName	DisplayString
	ibmappnNodePortDlcTracIndex	INTEGER
	ibmappnNodePortDlcTracDlcType	INTEGER
	ibmappnNodePortDlcTracLocalAddr	DisplayString
	ibmappnNodePortDlcTracRemoteAddr	DisplayString
	ibmappnNodePortDlcTracMsgType	INTEGER
	ibmappnNodePortDlcTracCmdType	INTEGER
	ibmappnNodePortDlcTracUseWan	INTEGER

IbmappnNodeLsEntry
SEQUENCE
	ibmappnNodeLsName	DisplayString
	ibmappnNodeLsPortName	DisplayString
	ibmappnNodeLsDlcType	INTEGER
	ibmappnNodeLsDynamic	INTEGER
	ibmappnNodeLsState	INTEGER
	ibmappnNodeLsCpName	DisplayString
	ibmappnNodeLsTgNum	INTEGER
	ibmappnNodeLsLimResource	INTEGER
	ibmappnNodeLsMigration	INTEGER
	ibmappnNodeLsBlockNum	DisplayString
	ibmappnNodeLsIdNum	DisplayString
	ibmappnNodeLsCpCpSession	INTEGER
	ibmappnNodeLsTargetPacingCount	INTEGER
	ibmappnNodeLsMaxSendBtuSize	INTEGER
	ibmappnNodeLsEffCap	INTEGER
	ibmappnNodeLsConnCost	INTEGER
	ibmappnNodeLsByteCost	INTEGER
	ibmappnNodeLsSecurity	INTEGER
	ibmappnNodeLsDelay	INTEGER
	ibmappnNodeLsUsr1	INTEGER
	ibmappnNodeLsUsr2	INTEGER
	ibmappnNodeLsUsr3	INTEGER
	ibmappnNodeLsInXidBytes	Counter
	ibmappnNodeLsInMsgBytes	Counter
	ibmappnNodeLsInXidFrames	Counter
	ibmappnNodeLsInMsgFrames	Counter
	ibmappnNodeLsOutXidBytes	Counter
	ibmappnNodeLsOutMsgBytes	Counter
	ibmappnNodeLsOutXidFrames	Counter
	ibmappnNodeLsOutMsgFrames	Counter
	ibmappnNodeLsEchoRsps	Counter
	ibmappnNodeLsCurrentDelay	INTEGER
	ibmappnNodeLsMaxDelay	INTEGER
	ibmappnNodeLsMinDelay	INTEGER
	ibmappnNodeLsMaxDelayTime	TimeTicks
	ibmappnNodeLsGoodXids	Counter
	ibmappnNodeLsBadXids	Counter
	ibmappnNodeLsSpecific	OBJECT IDENTIFIER
	ibmappnNodeLsSubState	INTEGER
	ibmappnNodeLsStartTime	TimeTicks
	ibmappnNodeLsActiveTime	TimeTicks
	ibmappnNodeLsCurrentStateTime	TimeTicks

IbmappnNodeLsIpEntry
SEQUENCE
	ibmappnNodeLsIpName	DisplayString
	ibmappnNodeLsIpState	INTEGER
	ibmappnNodeLsLocalIpAddr	IpAddress
	ibmappnNodeLsLocalIpPortNum	INTEGER
	ibmappnNodeLsRemoteIpAddr	IpAddress
	ibmappnNodeLsRemoteIpPortNum	INTEGER

IbmappnNodeLsDlsEntry
SEQUENCE
	ibmappnNodeLsDlsName	DisplayString
	ibmappnNodeLsDlsState	INTEGER
	ibmappnNodeLsLocalDlsMac	OCTET STRING
	ibmappnNodeLsLocalDlsSap	OCTET STRING
	ibmappnNodeLsRemoteDlsMac	OCTET STRING
	ibmappnNodeLsRemoteDlsSap	OCTET STRING

IbmappnNodeLsTrEntry
SEQUENCE
	ibmappnNodeLsTrName	DisplayString
	ibmappnNodeLsTrState	INTEGER
	ibmappnNodeLsLocalTrMac	OCTET STRING
	ibmappnNodeLsLocalTrSap	OCTET STRING
	ibmappnNodeLsRemoteTrMac	OCTET STRING
	ibmappnNodeLsRemoteTrSap	OCTET STRING

IbmappnNodeLsStatusEntry
SEQUENCE
	ibmappnNodeLsStatusIndex	INTEGER
	ibmappnNodeLsStatusTime	TimeTicks
	ibmappnNodeLsStatusLsName	DisplayString
	ibmappnNodeLsStatusCpName	DisplayString
	ibmappnNodeLsStatusNodeId	OCTET STRING
	ibmappnNodeLsStatusTgNum	INTEGER
	ibmappnNodeLsStatusGeneralSense	OCTET STRING
	ibmappnNodeLsStatusNofRetry	INTEGER
	ibmappnNodeLsStatusEndSense	OCTET STRING
	ibmappnNodeLsStatusXidLocalSense	OCTET STRING
	ibmappnNodeLsStatusXidRemoteSense	OCTET STRING
	ibmappnNodeLsStatusXidByteInError	INTEGER
	ibmappnNodeLsStatusXidBitInError	INTEGER
	ibmappnNodeLsStatusDlcType	INTEGER
	ibmappnNodeLsStatusLocalAddr	DisplayString
	ibmappnNodeLsStatusRemoteAddr	DisplayString

IbmappnNnTopoRouteEntry
SEQUENCE
	ibmappnNnTopoRouteCos	DisplayString
	ibmappnNnTopoRouteTrees	Counter
	ibmappnNnTopoRouteCalcs	Counter
	ibmappnNnTopoRouteRejs	Counter

IbmappnNnAdjNodeEntry
SEQUENCE
	ibmappnNnAdjNodeAdjName	DisplayString
	ibmappnNnAdjNodeCpCpSessStatus	INTEGER
	ibmappnNnAdjNodeOutOfSeqTdus	Gauge
	ibmappnNnAdjNodeLastFrsnSent	INTEGER
	ibmappnNnAdjNodeLastFrsnRcvd	INTEGER

IbmappnNnTopologyEntry
SEQUENCE
	ibmappnNnNodeName	DisplayString
	ibmappnNnNodeFrsn	INTEGER
	ibmappnNnNodeEntryTimeLeft	INTEGER
	ibmappnNnNodeType	INTEGER
	ibmappnNnNodeRsn	INTEGER
	ibmappnNnNodeRouteAddResist	INTEGER
	ibmappnNnNodeCongested	INTEGER
	ibmappnNnNodeIsrDepleted	INTEGER
	ibmappnNnNodeEndptDepleted	INTEGER
	ibmappnNnNodeQuiescing	INTEGER
	ibmappnNnNodeGateway	INTEGER
	ibmappnNnNodeCentralDirectory	INTEGER
	ibmappnNnNodeIsr	INTEGER
	ibmappnNnNodeChainSupport	INTEGER

IbmappnNnTgTopologyEntry
SEQUENCE
	ibmappnNnTgOwner	DisplayString
	ibmappnNnTgDest	DisplayString
	ibmappnNnTgNum	INTEGER
	ibmappnNnTgFrsn	INTEGER
	ibmappnNnTgEntryTimeLeft	INTEGER
	ibmappnNnTgDestVirtual	INTEGER
	ibmappnNnTgDlcData	OCTET STRING
	ibmappnNnTgRsn	INTEGER
	ibmappnNnTgOperational	INTEGER
	ibmappnNnTgQuiescing	INTEGER
	ibmappnNnTgCpCpSession	INTEGER
	ibmappnNnTgEffCap	INTEGER
	ibmappnNnTgConnCost	INTEGER
	ibmappnNnTgByteCost	INTEGER
	ibmappnNnTgSecurity	INTEGER
	ibmappnNnTgDelay	INTEGER
	ibmappnNnTgModemClass	INTEGER
	ibmappnNnTgUsr1	INTEGER
	ibmappnNnTgUsr2	INTEGER
	ibmappnNnTgUsr3	INTEGER

IbmappnNnTopologyFREntry
SEQUENCE
	ibmappnNnNodeFRName	DisplayString
	ibmappnNnNodeFRFrsn	INTEGER
	ibmappnNnNodeFREntryTimeLeft	INTEGER
	ibmappnNnNodeFRType	INTEGER
	ibmappnNnNodeFRRsn	INTEGER
	ibmappnNnNodeFRRouteAddResist	INTEGER
	ibmappnNnNodeFRCongested	INTEGER
	ibmappnNnNodeFRIsrDepleted	INTEGER
	ibmappnNnNodeFREndptDepleted	INTEGER
	ibmappnNnNodeFRQuiescing	INTEGER
	ibmappnNnNodeFRGateway	INTEGER
	ibmappnNnNodeFRCentralDirectory	INTEGER
	ibmappnNnNodeFRIsr	INTEGER
	ibmappnNnNodeFRChainSupport	INTEGER

IbmappnNnTgTopologyFREntry
SEQUENCE
	ibmappnNnTgFROwner	DisplayString
	ibmappnNnTgFRDest	DisplayString
	ibmappnNnTgFRNum	INTEGER
	ibmappnNnTgFRFrsn	INTEGER
	ibmappnNnTgFREntryTimeLeft	INTEGER
	ibmappnNnTgFRDestVirtual	INTEGER
	ibmappnNnTgFRDlcData	OCTET STRING
	ibmappnNnTgFRRsn	INTEGER
	ibmappnNnTgFROperational	INTEGER
	ibmappnNnTgFRQuiescing	INTEGER
	ibmappnNnTgFRCpCpSession	INTEGER
	ibmappnNnTgFREffCap	INTEGER
	ibmappnNnTgFRConnCost	INTEGER
	ibmappnNnTgFRByteCost	INTEGER
	ibmappnNnTgFRSecurity	INTEGER
	ibmappnNnTgFRDelay	INTEGER
	ibmappnNnTgFRModemClass	INTEGER
	ibmappnNnTgFRUsr1	INTEGER
	ibmappnNnTgFRUsr2	INTEGER
	ibmappnNnTgFRUsr3	INTEGER

IbmappnLocalTgEntry
SEQUENCE
	ibmappnLocalTgDest	DisplayString
	ibmappnLocalTgNum	INTEGER
	ibmappnLocalTgDestVirtual	INTEGER
	ibmappnLocalTgDlcData	OCTET STRING
	ibmappnLocalTgRsn	INTEGER
	ibmappnLocalTgQuiescing	INTEGER
	ibmappnLocalTgOperational	INTEGER
	ibmappnLocalTgCpCpSession	INTEGER
	ibmappnLocalTgEffCap	INTEGER
	ibmappnLocalTgConnCost	INTEGER
	ibmappnLocalTgByteCost	INTEGER
	ibmappnLocalTgSecurity	INTEGER
	ibmappnLocalTgDelay	INTEGER
	ibmappnLocalTgModemClass	INTEGER
	ibmappnLocalTgUsr1	INTEGER
	ibmappnLocalTgUsr2	INTEGER
	ibmappnLocalTgUsr3	INTEGER

IbmappnLocalEnEntry
SEQUENCE
	ibmappnLocalEnName	DisplayString
	ibmappnLocalEnEntryTimeLeft	INTEGER
	ibmappnLocalEnType	INTEGER

IbmappnLocalEnTgEntry
SEQUENCE
	ibmappnLocalEnTgOrigin	DisplayString
	ibmappnLocalEnTgDest	DisplayString
	ibmappnLocalEnTgNum	INTEGER
	ibmappnLocalEnTgEntryTimeLeft	INTEGER
	ibmappnLocalEnTgDestVirtual	INTEGER
	ibmappnLocalEnTgDlcData	OCTET STRING
	ibmappnLocalEnTgOperational	INTEGER
	ibmappnLocalEnTgCpCpSession	INTEGER
	ibmappnLocalEnTgEffCap	INTEGER
	ibmappnLocalEnTgConnCost	INTEGER
	ibmappnLocalEnTgByteCost	INTEGER
	ibmappnLocalEnTgSecurity	INTEGER
	ibmappnLocalEnTgDelay	INTEGER
	ibmappnLocalEnTgModemClass	INTEGER
	ibmappnLocalEnTgUsr1	INTEGER
	ibmappnLocalEnTgUsr2	INTEGER
	ibmappnLocalEnTgUsr3	INTEGER

IbmappnDirEntry
SEQUENCE
	ibmappnDirLuName	DisplayString
	ibmappnDirServerName	DisplayString
	ibmappnDirLuOwnerName	DisplayString
	ibmappnDirLuLocation	INTEGER
	ibmappnDirType	INTEGER
	ibmappnDirWildCard	INTEGER

IbmappnCosModeEntry
SEQUENCE
	ibmappnCosModeName	DisplayString
	ibmappnCosModeCosName	DisplayString

IbmappnCosNameEntry
SEQUENCE
	ibmappnCosName	DisplayString
	ibmappnCosTransPriority	INTEGER

IbmappnCosNodeRowEntry
SEQUENCE
	ibmappnCosNodeRowName	DisplayString
	ibmappnCosNodeRowIndex	INTEGER
	ibmappnCosNodeRowWgt	DisplayString
	ibmappnCosNodeRowResistMin	INTEGER
	ibmappnCosNodeRowResistMax	INTEGER
	ibmappnCosNodeRowMinCongestAllow	INTEGER
	ibmappnCosNodeRowMaxCongestAllow	INTEGER

IbmappnCosTgRowEntry
SEQUENCE
	ibmappnCosTgRowName	DisplayString
	ibmappnCosTgRowIndex	INTEGER
	ibmappnCosTgRowWgt	DisplayString
	ibmappnCosTgRowEffCapMin	INTEGER
	ibmappnCosTgRowEffCapMax	INTEGER
	ibmappnCosTgRowConnCostMin	INTEGER
	ibmappnCosTgRowConnCostMax	INTEGER
	ibmappnCosTgRowByteCostMin	INTEGER
	ibmappnCosTgRowByteCostMax	INTEGER
	ibmappnCosTgRowSecurityMin	INTEGER
	ibmappnCosTgRowSecurityMax	INTEGER
	ibmappnCosTgRowDelayMin	INTEGER
	ibmappnCosTgRowDelayMax	INTEGER
	ibmappnCosTgRowUsr1Min	INTEGER
	ibmappnCosTgRowUsr1Max	INTEGER
	ibmappnCosTgRowUsr2Min	INTEGER
	ibmappnCosTgRowUsr2Max	INTEGER
	ibmappnCosTgRowUsr3Min	INTEGER
	ibmappnCosTgRowUsr3Max	INTEGER

IbmappnIsInEntry
SEQUENCE
	ibmappnIsInFqLuName	DisplayString
	ibmappnIsInPcid	OCTET STRING
	ibmappnIsInPriLuName	DisplayString
	ibmappnIsInSecLuName	DisplayString
	ibmappnIsInModeName	DisplayString
	ibmappnIsInCosName	DisplayString
	ibmappnIsInTransPriority	INTEGER
	ibmappnIsInSessType	INTEGER
	ibmappnIsInSessState	INTEGER
	ibmappnIsInSessStartTime	TimeTicks
	ibmappnIsInSessUpTime	TimeTicks
	ibmappnIsInCtrUpTime	TimeTicks
	ibmappnIsInP2SFmdPius	Counter
	ibmappnIsInS2PFmdPius	Counter
	ibmappnIsInP2SNonFmdPius	Counter
	ibmappnIsInS2PNonFmdPius	Counter
	ibmappnIsInP2SFmdBytes	Counter
	ibmappnIsInS2PFmdBytes	Counter
	ibmappnIsInP2SNonFmdBytes	Counter
	ibmappnIsInS2PNonFmdBytes	Counter
	ibmappnIsInPsAdjCpName	DisplayString
	ibmappnIsInPsAdjTgNum	INTEGER
	ibmappnIsInPsSendMaxBtuSize	INTEGER
	ibmappnIsInPsSendPacingType	INTEGER
	ibmappnIsInPsSendRpc	Gauge
	ibmappnIsInPsSendNxWndwSize	Gauge
	ibmappnIsInPsRecvPacingType	INTEGER
	ibmappnIsInPsRecvRpc	Gauge
	ibmappnIsInPsRecvNxWndwSize	Gauge
	ibmappnIsInSsAdjCpName	DisplayString
	ibmappnIsInSsAdjTgNum	INTEGER
	ibmappnIsInSsSendMaxBtuSize	INTEGER
	ibmappnIsInSsSendPacingType	INTEGER
	ibmappnIsInSsSendRpc	Gauge
	ibmappnIsInSsSendNxWndwSize	Gauge
	ibmappnIsInSsRecvPacingType	INTEGER
	ibmappnIsInSsRecvRpc	Gauge
	ibmappnIsInSsRecvNxWndwSize	Gauge
	ibmappnIsInRouteInfo	OCTET STRING

IbmappnIsAcBtypeEntry
SEQUENCE
	ibmappnIsAcBtypeMedia	INTEGER
	ibmappnIsAcBtypeActive	INTEGER
	ibmappnIsAcBtypeDirName	DisplayString
	ibmappnIsAcBtypePrdMaxBufs	INTEGER
	ibmappnIsAcBtypeMaxBufs	INTEGER
	ibmappnIsAcBtypeCurBufs	Gauge
	ibmappnIsAcBtypePrdRecPerBuf	INTEGER
	ibmappnIsAcBtypeRecPerBuf	INTEGER
	ibmappnIsAcBtypeRecFormat	INTEGER
	ibmappnIsAcBtypeFullAction	INTEGER
	ibmappnIsAcBtypeFullTime	TimeTicks
	ibmappnIsAcBtypeFullReason	INTEGER
	ibmappnIsAcBtypeFullWraps	INTEGER
	ibmappnIsAcBtypeFullLosts	INTEGER
	ibmappnIsAcBtypeErrorWraps	INTEGER
	ibmappnIsAcBtypeErrorLosts	INTEGER
	ibmappnIsAcBtypeCheckPts	INTEGER
	ibmappnIsAcBtypePurges	INTEGER
	ibmappnIsAcBtypeDeletes	INTEGER
	ibmappnIsAcBtypeResets	INTEGER
	ibmappnIsAcBtypeClearStats	INTEGER

IbmappnIsAcBufEntry
SEQUENCE
	ibmappnIsAcBufMedia	INTEGER
	ibmappnIsAcBufNumber	INTEGER
	ibmappnIsAcBufState	INTEGER
	ibmappnIsAcBufRecFormat	INTEGER
	ibmappnIsAcBufMaxRecords	INTEGER
	ibmappnIsAcBufOldestIndex	INTEGER
	ibmappnIsAcBufNewestIndex	INTEGER
	ibmappnIsAcBufName	DisplayString

IbmappnIsAcTimeEntry
SEQUENCE
	ibmappnIsAcTimeIndex	INTEGER
	ibmappnIsAcTimeEntryType	INTEGER
	ibmappnIsAcTimeForMedia	INTEGER
	ibmappnIsAcTimeRecTime	TimeTicks
	ibmappnIsAcTimeAgtUtcSecs	INTEGER
	ibmappnIsAcTimeAgtUtcMins	INTEGER
	ibmappnIsAcTimeAgtUtcHours	INTEGER
	ibmappnIsAcTimeAgtUtcMdays	INTEGER
	ibmappnIsAcTimeAgtUtcMonths	INTEGER
	ibmappnIsAcTimeAgtUtcYears	INTEGER
	ibmappnIsAcTimeAgtUtcWdays	INTEGER
	ibmappnIsAcTimeAgtUtcYdays	INTEGER
	ibmappnIsAcTimeAgtUtcIsdst	INTEGER
	ibmappnIsAcTimeAgtName	DisplayString
	ibmappnIsAcTimeMgrUtcSecs	INTEGER
	ibmappnIsAcTimeMgrUtcMins	INTEGER
	ibmappnIsAcTimeMgrUtcHours	INTEGER
	ibmappnIsAcTimeMgrUtcMdays	INTEGER
	ibmappnIsAcTimeMgrUtcMonths	INTEGER
	ibmappnIsAcTimeMgrUtcYears	INTEGER
	ibmappnIsAcTimeMgrUtcWdays	INTEGER
	ibmappnIsAcTimeMgrUtcYdays	INTEGER
	ibmappnIsAcTimeMgrUtcIsdst	INTEGER
	ibmappnIsAcTimeMgrName	DisplayString
	ibmappnIsAcTimeMgrTimeValid	INTEGER

IbmappnIsAcDataEntry
SEQUENCE
	ibmappnIsAcIndex	INTEGER
	ibmappnIsAcEntryType	INTEGER
	ibmappnIsAcRecTime	TimeTicks
	ibmappnIsAcFqLuName	DisplayString
	ibmappnIsAcPcid	OCTET STRING
	ibmappnIsAcPriLuName	DisplayString
	ibmappnIsAcSecLuName	DisplayString
	ibmappnIsAcCosName	DisplayString
	ibmappnIsAcModeName	DisplayString
	ibmappnIsAcTransPriority	INTEGER
	ibmappnIsAcSessType	INTEGER
	ibmappnIsAcSessState	INTEGER
	ibmappnIsAcSessStartTime	TimeTicks
	ibmappnIsAcSessUpTime	TimeTicks
	ibmappnIsAcCtrUpTime	TimeTicks
	ibmappnIsAcEndReason	OCTET STRING
	ibmappnIsAcP2SFmdPius	Counter
	ibmappnIsAcS2PFmdPius	Counter
	ibmappnIsAcP2SNonFmdPius	Counter
	ibmappnIsAcS2PNonFmdPius	Counter
	ibmappnIsAcP2SFmdBytes	Counter
	ibmappnIsAcS2PFmdBytes	Counter
	ibmappnIsAcP2SNonFmdBytes	Counter
	ibmappnIsAcS2PNonFmdBytes	Counter
	ibmappnIsAcRouteInfo	OCTET STRING

IbmappcInLluEntry
SEQUENCE
	ibmappcInLluLuName	DisplayString
	ibmappcInLluDefType	INTEGER
	ibmappcInLluSessLimit	INTEGER
	ibmappcInLluBindRspMayQ	INTEGER
	ibmappcInLluDefaultLu	INTEGER
	ibmappcInLluCntlPtLu	INTEGER
	ibmappcInLluCurActSess	Gauge

IbmappcInRluEntry
SEQUENCE
	ibmappcInRluLocLuName	DisplayString
	ibmappcInRluParLuName	DisplayString
	ibmappcInRluParLuLocName	DisplayString
	ibmappcInRluDefType	INTEGER
	ibmappcInRluDefParaSessSup	INTEGER
	ibmappcInRluDefCnosSup	INTEGER
	ibmappcInRluDefAllVerSup	INTEGER
	ibmappcInRluDefAttSecSup	INTEGER
	ibmappcInRluDefSessSecSup	INTEGER
	ibmappcInRluDefEnhanSecSup	INTEGER
	ibmappcInRluActType	INTEGER
	ibmappcInRluActParaSessSup	INTEGER
	ibmappcInRluActCnosSup	INTEGER
	ibmappcInRluActAllVerSup	INTEGER
	ibmappcInRluActAttSecSup	INTEGER
	ibmappcInRluActSessSecSup	INTEGER
	ibmappcInRluActEnhanSecSup	INTEGER

IbmappcInMdEntry
SEQUENCE
	ibmappcInMdLluName	DisplayString
	ibmappcInMdRluName	DisplayString
	ibmappcInMdModeName	DisplayString
	ibmappcInMdDefType	INTEGER
	ibmappcInMdSessEndTpName	DisplayString
	ibmappcInMdSessLimit	INTEGER
	ibmappcInMdMaxSessLimit	INTEGER
	ibmappcInMdAutoActLimit	INTEGER
	ibmappcInMdDrainSelf	INTEGER
	ibmappcInMdDrainPart	INTEGER
	ibmappcInMdMinCwinLimit	INTEGER
	ibmappcInMdMinClosLimit	INTEGER
	ibmappcInMdRecvPacWinSz	INTEGER
	ibmappcInMdSendPacWinSz	INTEGER
	ibmappcInMdPrefRecvRuSz	INTEGER
	ibmappcInMdPrefSendRuSz	INTEGER
	ibmappcInMdRecvRuSzUpBnd	INTEGER
	ibmappcInMdSendRuSzUpBnd	INTEGER
	ibmappcInMdRecvRuSzLoBnd	INTEGER
	ibmappcInMdSendRuSzLoBnd	INTEGER
	ibmappcInMdDfSyncLvl	INTEGER
	ibmappcInMdAcSyncLvl	INTEGER
	ibmappcInMdDfCrypto	INTEGER
	ibmappcInMdAcCrypto	INTEGER
	ibmappcInMdReinit	INTEGER
	ibmappcInMdAltCode	INTEGER
	ibmappcInMdActCwin	Gauge
	ibmappcInMdActClos	Gauge
	ibmappcInMdPndCwin	Gauge
	ibmappcInMdPndClos	Gauge
	ibmappcInMdPtmCwin	Gauge
	ibmappcInMdPtmClos	Gauge
	ibmappcInMdFreeSessLst	Gauge
	ibmappcInMdWaitReqLst	Gauge

IbmappcInLtpEntry
SEQUENCE
	ibmappcInLtpLuName	DisplayString
	ibmappcInLtpTpName	DisplayString
	ibmappcInLtpDefType	INTEGER
	ibmappcInLtpSyncLvl	INTEGER
	ibmappcInLtpInstLmt	INTEGER
	ibmappcInLtpInstNum	Gauge
	ibmappcInLtpStatus	INTEGER
	ibmappcInLtpLongRun	INTEGER
	ibmappcInLtpPfCnos	INTEGER
	ibmappcInLtpPfSessCntl	INTEGER
	ibmappcInLtpPfDefine	INTEGER
	ibmappcInLtpPfDisplay	INTEGER
	ibmappcInLtpPfAllocSer	INTEGER
	ibmappcInLtpRescSup	INTEGER
	ibmappcInLtpRecoSup	INTEGER
	ibmappcInLtpSecReq	INTEGER
	ibmappcInLtpSecLvl	INTEGER
	ibmappcInLtpVerPip	INTEGER
	ibmappcInLtpPipSubNum	INTEGER

IbmappcInSsEntry
SEQUENCE
	ibmappcInSsFqLuName	DisplayString
	ibmappcInSsPcid	OCTET STRING
	ibmappcInSsPluName	DisplayString
	ibmappcInSsSluName	DisplayString
	ibmappcInSsModeName	DisplayString
	ibmappcInSsCosName	DisplayString
	ibmappcInSsSessType	INTEGER
	ibmappcInSsSessState	INTEGER
	ibmappcInSsTransPriority	INTEGER
	ibmappcInSsPaceType	INTEGER
	ibmappcInSsSendMaxRuSz	INTEGER
	ibmappcInSsRecvMaxRuSz	INTEGER
	ibmappcInSsEnhanceSecSup	INTEGER
	ibmappcInSsSendPacingType	INTEGER
	ibmappcInSsSendRpc	Gauge
	ibmappcInSsSendNxWndwSize	Gauge
	ibmappcInSsRecvPacingType	INTEGER
	ibmappcInSsRecvRpc	Gauge
	ibmappcInSsRecvNxWndwSize	Gauge
	ibmappcInSsSessStartTime	TimeTicks
	ibmappcInSsSessUpTime	TimeTicks
	ibmappcInSsCtrUpTime	TimeTicks
	ibmappcInSsP2SFmdPius	Counter
	ibmappcInSsS2PFmdPius	Counter
	ibmappcInSsP2SNonFmdPius	Counter
	ibmappcInSsS2PNonFmdPius	Counter
	ibmappcInSsP2SFmdBytes	Counter
	ibmappcInSsS2PFmdBytes	Counter
	ibmappcInSsP2SNonFmdBytes	Counter
	ibmappcInSsS2PNonFmdBytes	Counter
	ibmappcInSsRscv	OCTET STRING

IbmappcInSsStatusEntry
SEQUENCE
	ibmappcInSsStatusIndex	INTEGER
	ibmappcInSsStatusTime	TimeTicks
	ibmappcInSsStatusType	INTEGER
	ibmappcInSsStatusLocLuName	DisplayString
	ibmappcInSsStatusParLuName	DisplayString
	ibmappcInSsStatusModeName	DisplayString
	ibmappcInSsStatusUnbindType	OCTET STRING
	ibmappcInSsStatusSenseCode	OCTET STRING
	ibmappcInSsStatusComponentId	DisplayString
	ibmappcInSsStatusDetectModule	DisplayString

Defined Values

ibm		1.3.6.1.4.1.2
OBJECT IDENTIFIER

ibmProd		1.3.6.1.4.1.2.6
OBJECT IDENTIFIER

ibm6611		1.3.6.1.4.1.2.6.2
OBJECT IDENTIFIER

ibmSubagents		1.3.6.1.4.1.2.6.2.1
OBJECT IDENTIFIER

ibmChipSets		1.3.6.1.4.1.2.6.2.2
OBJECT IDENTIFIER

ibmDSUs		1.3.6.1.4.1.2.6.2.3
OBJECT IDENTIFIER

ibmsystem		1.3.6.1.4.1.2.6.2.4
OBJECT IDENTIFIER

ibmicmp		1.3.6.1.4.1.2.6.2.5
OBJECT IDENTIFIER

ibmsnmp		1.3.6.1.4.1.2.6.2.6
OBJECT IDENTIFIER

ibmbridge		1.3.6.1.4.1.2.6.2.7
OBJECT IDENTIFIER

ibmfr		1.3.6.1.4.1.2.6.2.8
OBJECT IDENTIFIER

ibmdls		1.3.6.1.4.1.2.6.2.9
OBJECT IDENTIFIER

ibmppp		1.3.6.1.4.1.2.6.2.10
OBJECT IDENTIFIER

ibmxns		1.3.6.1.4.1.2.6.2.11
OBJECT IDENTIFIER

ibmipx		1.3.6.1.4.1.2.6.2.12
OBJECT IDENTIFIER

ibmappn		1.3.6.1.4.1.2.6.2.13
OBJECT IDENTIFIER

ibmrpq		1.3.6.1.4.1.2.6.2.14
OBJECT IDENTIFIER

ibmtb		1.3.6.1.4.1.2.6.2.15
OBJECT IDENTIFIER

ibmapple		1.3.6.1.4.1.2.6.2.16
OBJECT IDENTIFIER

ibmdec		1.3.6.1.4.1.2.6.2.17
OBJECT IDENTIFIER

ibmvines		1.3.6.1.4.1.2.6.2.18
OBJECT IDENTIFIER

ibminterfaces		1.3.6.1.4.1.2.6.2.19
OBJECT IDENTIFIER

ibmMainProcessorLoadTable		1.3.6.1.4.1.2.6.2.4.1
A table containing the average main processor load over each minute for the last 60 minutes.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmMainProcessorLoadEntry

ibmMainProcessorLoadEntry		1.3.6.1.4.1.2.6.2.4.1.1
An entry in the main processor load table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmMainProcessorLoadEntry

ibmMainProcessorLoadIndex		1.3.6.1.4.1.2.6.2.4.1.1.1
Indicates the number of minutes ago that this entry contains main processor load information for.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..60

ibmMainProcessorLoad		1.3.6.1.4.1.2.6.2.4.1.1.2
The main processor load averaged over one minute. The load is given as a percentage. For example, 25% is 25.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmswvpd		1.3.6.1.4.1.2.6.2.4.2
OBJECT IDENTIFIER

swVpdTable		1.3.6.1.4.1.2.6.2.4.2.1
A table containing software vital product data information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwVpdEntry

swVpdEntry		1.3.6.1.4.1.2.6.2.4.2.1.1
An entry for a piece of software installed on this router.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SwVpdEntry

swvpdIndex		1.3.6.1.4.1.2.6.2.4.2.1.1.1
A unique value for each entry in this table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

swvpdName		1.3.6.1.4.1.2.6.2.4.2.1.1.2
The name of this software product.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

swvpdPtfName		1.3.6.1.4.1.2.6.2.4.2.1.1.3
If this entry represents a PTF, this object contains the name of the PTF. Otherwise this object contains a string of zero length.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

swvpdVerId		1.3.6.1.4.1.2.6.2.4.2.1.1.4
The version identifier for this piece of software.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

swvpdRelId		1.3.6.1.4.1.2.6.2.4.2.1.1.5
The release identifier for this piece of software.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

swvpdModId		1.3.6.1.4.1.2.6.2.4.2.1.1.6
The modification level identifier for this piece of software.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

swvpdFixId		1.3.6.1.4.1.2.6.2.4.2.1.1.7
The fix level identifier for this piece of software.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

swvpdState		1.3.6.1.4.1.2.6.2.4.2.1.1.8
The state of the action in swvpdAction being performed on this software.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	complete(1), pending(2), broken(3), cancelled(4), unknown(5)

swvpdAction		1.3.6.1.4.1.2.6.2.4.2.1.1.9
The action being performed on this software.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	apply(1), commit(2), reject(3), decommit(4), cleanup(5), unknown(6)

swvpdPath		1.3.6.1.4.1.2.6.2.4.2.1.1.10
An indication of which part of the system this software is installed on. The values correspond to the following paths: root(1) /etc/objrepos usr(2) /usr/lib/objrepos share(3) /usr/share/lib/objrepos
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	root(1), usr(2), share(3)

swvpdDateTime		1.3.6.1.4.1.2.6.2.4.2.1.1.11
A string indicating the date and time that the action in swvpdAction was performed on this software.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmmaint		1.3.6.1.4.1.2.6.2.4.4
OBJECT IDENTIFIER

ibmmaintShutdown		1.3.6.1.4.1.2.6.2.4.4.1
When read, an active 6611 will return the value running(1). To force a shutdown, without a subsequent re-ipl of the 6611, this value should be set to shutdown-noipl(2). To recyle the 6611, (i.e.- shutdown with a subsequent re-ipl), and use the currently installed configuration, this variable should be set to shutdown-ipl-local(4).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	running(1), shutdown-noipl(2), shutdown-ipl-local(4)

ibmTrapNum		1.3.6.1.4.1.2.6.2.6.1
Number of IBM enterprise specific traps generated by this node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmTrapThrottleCount		1.3.6.1.4.1.2.6.2.6.2
Number of traps throttled since last trap.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmTrapThrottleId		1.3.6.1.4.1.2.6.2.6.3
Trap ID of throttled traps. All throttled traps counted by ibmTrapThrottleCount have the this ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmTrapThrottleTime		1.3.6.1.4.1.2.6.2.6.4
Number of seconds which must separate consecutive enterprise-specific traps with identical ID in order to not throttle them. If the value of this object is 0, then trap throttling is inactive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmChipSetIntel		1.3.6.1.4.1.2.6.2.2.1
OBJECT IDENTIFIER

ibmChipSetIntel82596B		1.3.6.1.4.1.2.6.2.2.1.1
OBJECT IDENTIFIER

ibmChipSetIBM		1.3.6.1.4.1.2.6.2.2.2
OBJECT IDENTIFIER

ibmChipSetIBM8025A		1.3.6.1.4.1.2.6.2.2.2.1
OBJECT IDENTIFIER

ibmChipSetIBM8025B		1.3.6.1.4.1.2.6.2.2.2.2
OBJECT IDENTIFIER

ibmChipSetSignetics		1.3.6.1.4.1.2.6.2.2.3
OBJECT IDENTIFIER

ibmChipSetSigneticsSCN68562		1.3.6.1.4.1.2.6.2.2.3.1
OBJECT IDENTIFIER

ibmbridgeMACAddressFilters		1.3.6.1.4.1.2.6.2.7.1
OBJECT IDENTIFIER

ibmbridgeSAPFilters		1.3.6.1.4.1.2.6.2.7.2
OBJECT IDENTIFIER

ibmbridgeSNAPFilters		1.3.6.1.4.1.2.6.2.7.3
OBJECT IDENTIFIER

ibmbridgeRingFilters		1.3.6.1.4.1.2.6.2.7.4
OBJECT IDENTIFIER

ibmbridgeHopCountFilters		1.3.6.1.4.1.2.6.2.7.5
OBJECT IDENTIFIER

ibmbridgeWindowFilters		1.3.6.1.4.1.2.6.2.7.6
OBJECT IDENTIFIER

ibmbridgeFiltOrderTable		1.3.6.1.4.1.2.6.2.7.7
OBJECT IDENTIFIER

ibmbridgeRIFFilters		1.3.6.1.4.1.2.6.2.7.8
OBJECT IDENTIFIER

ibmmacAddrFilterInfoTable		1.3.6.1.4.1.2.6.2.7.1.1
Table of MAC address filtering information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MacAddrFilterInfoEntry

ibmmacAddrFilterInfoEntry		1.3.6.1.4.1.2.6.2.7.1.1.1
MAC address filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MacAddrFilterInfoEntry

ibmmacAddrFilterIfIndex		1.3.6.1.4.1.2.6.2.7.1.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmmacAddrFilterInBcastType		1.3.6.1.4.1.2.6.2.7.1.1.1.2
For the incoming MAC address filter table, determines what type of frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmmacAddrFilterOutBcastType		1.3.6.1.4.1.2.6.2.7.1.1.1.3
For the outgoing MAC address filter table, determines what type of frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmmacAddrFilterInFilterType		1.3.6.1.4.1.2.6.2.7.1.1.1.4
For the incoming filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmmacAddrFilterOutFilterType		1.3.6.1.4.1.2.6.2.7.1.1.1.5
For the outgoing filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmmacAddrFilterInNotForwarded		1.3.6.1.4.1.2.6.2.7.1.1.1.6
Number of packets not forwarded, in the incoming direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmmacAddrFilterOutNotForwarded		1.3.6.1.4.1.2.6.2.7.1.1.1.7
Number of packets not forwarded, in the outgoing direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmmacAddrFilterType		1.3.6.1.4.1.2.6.2.7.1.1.1.8
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmmacAddrFilterInTable		1.3.6.1.4.1.2.6.2.7.1.2
Table of MAC address filtering information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MacAddrFilterInEntry

ibmmacAddrFilterInEntry		1.3.6.1.4.1.2.6.2.7.1.2.1
Filtering information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MacAddrFilterInEntry

ibmmacAddrFilterInIfIndex		1.3.6.1.4.1.2.6.2.7.1.2.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmmacAddrFilterInSrcAddress		1.3.6.1.4.1.2.6.2.7.1.2.1.2
MAC source address to be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmmacAddrFilterInSrcMask		1.3.6.1.4.1.2.6.2.7.1.2.1.3
Mask to allow ibmmacAddrFilterInSrcAddress to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmmacAddrFilterInDestAddress		1.3.6.1.4.1.2.6.2.7.1.2.1.4
MAC destination address to be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmmacAddrFilterInDestMask		1.3.6.1.4.1.2.6.2.7.1.2.1.5
Mask to allow ibmmacAddrFilterInDestAddress to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmmacAddrFilterInType		1.3.6.1.4.1.2.6.2.7.1.2.1.6
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmmacAddrFilterOutTable		1.3.6.1.4.1.2.6.2.7.1.3
Table of MAC address filtering information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MacAddrFilterOutEntry

ibmmacAddrFilterOutEntry		1.3.6.1.4.1.2.6.2.7.1.3.1
Filtering information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MacAddrFilterOutEntry

ibmmacAddrFilterOutIfIndex		1.3.6.1.4.1.2.6.2.7.1.3.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmmacAddrFilterOutSrcAddress		1.3.6.1.4.1.2.6.2.7.1.3.1.2
MAC source address to be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmmacAddrFilterOutSrcMask		1.3.6.1.4.1.2.6.2.7.1.3.1.3
Mask to allow ibmmacAddrFilterOutSrcAddress to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmmacAddrFilterOutDestAddress		1.3.6.1.4.1.2.6.2.7.1.3.1.4
MAC destination address to be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmmacAddrFilterOutDestMask		1.3.6.1.4.1.2.6.2.7.1.3.1.5
Mask to allow ibmmacAddrFilterOutDestAddress to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmmacAddrFilterOutType		1.3.6.1.4.1.2.6.2.7.1.3.1.6
Type type of entry either sr or tb
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmsapFilterInfoTable		1.3.6.1.4.1.2.6.2.7.2.1
Table of SAP filtering information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SapFilterInfoEntry

ibmsapFilterInfoEntry		1.3.6.1.4.1.2.6.2.7.2.1.1
SAP filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SapFilterInfoEntry

ibmsapFilterIfIndex		1.3.6.1.4.1.2.6.2.7.2.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmsapFilterInBcastType		1.3.6.1.4.1.2.6.2.7.2.1.1.2
For the incoming SAP filter table, determines what type of frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmsapFilterOutBcastType		1.3.6.1.4.1.2.6.2.7.2.1.1.3
For the outgoing SAP filter table, determines what type of frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmsapFilterIn		1.3.6.1.4.1.2.6.2.7.2.1.1.4
A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an incoming frame with that SAP is to be forwarded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(16)

ibmsapFilterOut		1.3.6.1.4.1.2.6.2.7.2.1.1.5
A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an outgoing frame with that SAP is to be forwarded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(16)

ibmsapFilterInNotForwarded		1.3.6.1.4.1.2.6.2.7.2.1.1.6
Number of packets not forwarded, in the incoming direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmsapFilterOutNotForwarded		1.3.6.1.4.1.2.6.2.7.2.1.1.7
Number of packets not forwarded, in the outgoing direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmsapFilterType		1.3.6.1.4.1.2.6.2.7.2.1.1.8
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmsnapFilterInfoTable		1.3.6.1.4.1.2.6.2.7.3.1
Table of SNAP filtering information. Note that SNAP filtering only comes into play if packets with source SAP 0xAA are being forwarded.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SnapFilterInfoEntry

ibmsnapFilterInfoEntry		1.3.6.1.4.1.2.6.2.7.3.1.1
SNAP filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SnapFilterInfoEntry

ibmsnapFilterIfIndex		1.3.6.1.4.1.2.6.2.7.3.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmsnapFilterInFilterType		1.3.6.1.4.1.2.6.2.7.3.1.1.2
For the incoming SNAP filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmsnapFilterOutFilterType		1.3.6.1.4.1.2.6.2.7.3.1.1.3
For the outgoing SNAP filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmsnapFilterInNotForwarded		1.3.6.1.4.1.2.6.2.7.3.1.1.4
Number of packets not forwarded, in the incoming direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmsnapFilterOutNotForwarded		1.3.6.1.4.1.2.6.2.7.3.1.1.5
Number of packets not forwarded, in the outgoing direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmsnapFilterType		1.3.6.1.4.1.2.6.2.7.3.1.1.6
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmsnapFilterInTable		1.3.6.1.4.1.2.6.2.7.3.2
Table of SNAP type filtering information for incoming frames. Note that the entries in this table only come into play if packets with source SAP 0xAA are being forwarded.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SnapFilterInEntry

ibmsnapFilterInEntry		1.3.6.1.4.1.2.6.2.7.3.2.1
Filtering information for a single SNAP value on a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SnapFilterInEntry

ibmsnapFilterInIfIndex		1.3.6.1.4.1.2.6.2.7.3.2.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmsnapFilterInValue		1.3.6.1.4.1.2.6.2.7.3.2.1.2
Indicates which SNAP value to filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmsnapFilterInMask		1.3.6.1.4.1.2.6.2.7.3.2.1.3
Mask to allow ibmsnapFilterInValue to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmsnapFilterInType		1.3.6.1.4.1.2.6.2.7.3.2.1.4
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmsnapFilterOutTable		1.3.6.1.4.1.2.6.2.7.3.3
Table of SNAP filtering information for outgoing frames. Note that the entries in this table only come into play if packets with source SAP 0xAA are being forwarded.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SnapFilterOutEntry

ibmsnapFilterOutEntry		1.3.6.1.4.1.2.6.2.7.3.3.1
Filtering information for a single SNAP value on a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SnapFilterOutEntry

ibmsnapFilterOutIfIndex		1.3.6.1.4.1.2.6.2.7.3.3.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmsnapFilterOutValue		1.3.6.1.4.1.2.6.2.7.3.3.1.2
Indicates which SNAP values to filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmsnapFilterOutMask		1.3.6.1.4.1.2.6.2.7.3.3.1.3
Mask to allow ibmsnapFilterOutValue to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmsnapFilterOutType		1.3.6.1.4.1.2.6.2.7.3.3.1.4
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmringFilterInfoTable		1.3.6.1.4.1.2.6.2.7.4.1
Table of ring filtering information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RingFilterInfoEntry

ibmringFilterInfoEntry		1.3.6.1.4.1.2.6.2.7.4.1.1
Ring filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RingFilterInfoEntry

ibmringFilterIfIndex		1.3.6.1.4.1.2.6.2.7.4.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmringFilterInBcastType		1.3.6.1.4.1.2.6.2.7.4.1.1.2
For the incoming ring filter table, determines what type of frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmringFilterOutBcastType		1.3.6.1.4.1.2.6.2.7.4.1.1.3
For the outgoing ring filter table, determines what type of frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmringFilterInFilterType		1.3.6.1.4.1.2.6.2.7.4.1.1.4
For the incoming ring filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmringFilterOutFilterType		1.3.6.1.4.1.2.6.2.7.4.1.1.5
For the outgoing ring filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmringFilterInNotForwarded		1.3.6.1.4.1.2.6.2.7.4.1.1.6
Number of packets not forwarded, in the incoming direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmringFilterOutNotForwarded		1.3.6.1.4.1.2.6.2.7.4.1.1.7
Number of packets not forwarded, in the outgoing direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmringFilterInTable		1.3.6.1.4.1.2.6.2.7.4.2
Table of ring number filtering information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RingFilterInEntry

ibmringFilterInEntry		1.3.6.1.4.1.2.6.2.7.4.2.1
Filtering information for a single ring number on a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RingFilterInEntry

ibmringFilterInIfIndex		1.3.6.1.4.1.2.6.2.7.4.2.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmringFilterInNumber		1.3.6.1.4.1.2.6.2.7.4.2.1.2
Indicates which ring number to filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmringFilterInMask		1.3.6.1.4.1.2.6.2.7.4.2.1.3
Mask to allow ibmringFilterInNumber to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmringFilterOutTable		1.3.6.1.4.1.2.6.2.7.4.3
Table of ring number filtering information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RingFilterOutEntry

ibmringFilterOutEntry		1.3.6.1.4.1.2.6.2.7.4.3.1
Filtering information for a single ring number on a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RingFilterOutEntry

ibmringFilterOutIfIndex		1.3.6.1.4.1.2.6.2.7.4.3.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmringFilterOutNumber		1.3.6.1.4.1.2.6.2.7.4.3.1.2
Indicates which ring number to filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmringFilterOutMask		1.3.6.1.4.1.2.6.2.7.4.3.1.3
Mask to allow ibmringFilterOutNumber to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmhopCountFilterInfoTable		1.3.6.1.4.1.2.6.2.7.5.1
Table of hop count filtering information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		HopCountFilterInfoEntry

ibmhopCountFilterInfoEntry		1.3.6.1.4.1.2.6.2.7.5.1.1
Hop count filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	HopCountFilterInfoEntry

ibmhopCountFilterIfIndex		1.3.6.1.4.1.2.6.2.7.5.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmhopCountFilterBcastType		1.3.6.1.4.1.2.6.2.7.5.1.1.2
Determines what type of incoming frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmhopCountFilterCount		1.3.6.1.4.1.2.6.2.7.5.1.1.3
The number of hops allowed for incoming frames.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmwindowFilterInfoTable		1.3.6.1.4.1.2.6.2.7.6.1
Table of Window filtering information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WindowFilterInfoEntry

ibmwindowFilterInfoEntry		1.3.6.1.4.1.2.6.2.7.6.1.1
Window filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WindowFilterInfoEntry

ibmwindowFilterIfIndex		1.3.6.1.4.1.2.6.2.7.6.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmwindowFilterInBcastType		1.3.6.1.4.1.2.6.2.7.6.1.1.2
For the incoming Window filter table, determines what type of frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmwindowFilterOutBcastType		1.3.6.1.4.1.2.6.2.7.6.1.1.3
For the outgoing Window filter table, determines what type of frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmwindowFilterInFilterType		1.3.6.1.4.1.2.6.2.7.6.1.1.4
For the incoming filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmwindowFilterOutFilterType		1.3.6.1.4.1.2.6.2.7.6.1.1.5
For the outgoing filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmwindowFilterInNotForwarded		1.3.6.1.4.1.2.6.2.7.6.1.1.6
Number of packets not forwarded, in the incoming direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmwindowFilterOutNotForwarded		1.3.6.1.4.1.2.6.2.7.6.1.1.7
Number of packets not forwarded, in the outgoing direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmwindowFilterType		1.3.6.1.4.1.2.6.2.7.6.1.1.8
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmwindowFilterInTable		1.3.6.1.4.1.2.6.2.7.6.2
Table of Window filtering information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WindowFilterInEntry

ibmwindowFilterInEntry		1.3.6.1.4.1.2.6.2.7.6.2.1
Filtering information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WindowFilterInEntry

ibmwindowFilterInIfIndex		1.3.6.1.4.1.2.6.2.7.6.2.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmwindowFilterInContents		1.3.6.1.4.1.2.6.2.7.6.2.1.2
String of bytes that will be compared with bytes in the frame.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmwindowFilterInMaskString		1.3.6.1.4.1.2.6.2.7.6.2.1.3
String of bytes that will be masked with bytes in the contents field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmwindowFilterInOffsetStart		1.3.6.1.4.1.2.6.2.7.6.2.1.4
Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address field, whereas, a value of 'SAP' means it is applied at the beginning of the destination SAP field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmwindowFilterInNumBytes		1.3.6.1.4.1.2.6.2.7.6.2.1.5
Number of bytes in the contents field that are used for filtering.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmwindowFilterInOffset		1.3.6.1.4.1.2.6.2.7.6.2.1.6
Number of bytes offset into the frame from the offset start point to begin the compare.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmwindowFilterInId		1.3.6.1.4.1.2.6.2.7.6.2.1.7
A unique identifier associated with this window filter entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmwindowFilterInType		1.3.6.1.4.1.2.6.2.7.6.2.1.8
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmwindowFilterOutTable		1.3.6.1.4.1.2.6.2.7.6.3
Table of Window filtering information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WindowFilterOutEntry

ibmwindowFilterOutEntry		1.3.6.1.4.1.2.6.2.7.6.3.1
Filtering information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WindowFilterOutEntry

ibmwindowFilterOutIfIndex		1.3.6.1.4.1.2.6.2.7.6.3.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmwindowFilterOutContents		1.3.6.1.4.1.2.6.2.7.6.3.1.2
String of bytes that will be compared with bytes in the frame.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmwindowFilterOutMaskString		1.3.6.1.4.1.2.6.2.7.6.3.1.3
String of bytes that will be masked with bytes in the contents field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmwindowFilterOutOffsetStart		1.3.6.1.4.1.2.6.2.7.6.3.1.4
Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address field, whereas, a value of 'SAP' means it is applied at the beginning of the destination SAP field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmwindowFilterOutNumBytes		1.3.6.1.4.1.2.6.2.7.6.3.1.5
Number of bytes in the contents field that are used for filtering.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmwindowFilterOutOffset		1.3.6.1.4.1.2.6.2.7.6.3.1.6
Number of bytes offset into the frame from the offset start point to begin the compare.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmwindowFilterOutId		1.3.6.1.4.1.2.6.2.7.6.3.1.7
A unique identifier associated with this window filter entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmwindowFilterOutType		1.3.6.1.4.1.2.6.2.7.6.3.1.8
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmFiltOrderInTable		1.3.6.1.4.1.2.6.2.7.7.1
Table of information describing which order the filters are applied for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FiltOrderInEntry

ibmFiltOrderInEntry		1.3.6.1.4.1.2.6.2.7.7.1.1
Filter order information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	FiltOrderInEntry

ibmFiltOrderInIfIndex		1.3.6.1.4.1.2.6.2.7.7.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmFiltOrderInPriority		1.3.6.1.4.1.2.6.2.7.7.1.1.2
The priority of when a filter is applied to an incoming frame. A value of 1 signifies that it is applied first.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmFiltOrderInName		1.3.6.1.4.1.2.6.2.7.7.1.1.3
The name of the filter applied to incoming frames that is associated with the priority, ibmFiltOrderInPriority.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmFiltOrderInType		1.3.6.1.4.1.2.6.2.7.7.1.1.4
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmFiltOrderOutTable		1.3.6.1.4.1.2.6.2.7.7.2
Table of information describing which order the filters are applied for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		FiltOrderOutEntry

ibmFiltOrderOutEntry		1.3.6.1.4.1.2.6.2.7.7.2.1
Filter order information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	FiltOrderOutEntry

ibmFiltOrderOutIfIndex		1.3.6.1.4.1.2.6.2.7.7.2.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmFiltOrderOutPriority		1.3.6.1.4.1.2.6.2.7.7.2.1.2
The priority of when a filter is applied to an outgoing frame. A value of 1 signifies that it is applied first.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmFiltOrderOutName		1.3.6.1.4.1.2.6.2.7.7.2.1.3
The name of the filter applied to outgoing frames that is associated with the priority, ibmFiltOrderOutPriority.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmFiltOrderOutType		1.3.6.1.4.1.2.6.2.7.7.2.1.4
The type of entry, either sr or tb.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sr(1), tb(2)

ibmRIFFilterInfoTable		1.3.6.1.4.1.2.6.2.7.8.1
Table of routing information field filtering information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RIFFilterInfoEntry

ibmRIFFilterInfoEntry		1.3.6.1.4.1.2.6.2.7.8.1.1
Routing information field filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RIFFilterInfoEntry

ibmRIFFilterIfIndex		1.3.6.1.4.1.2.6.2.7.8.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterInBcastType		1.3.6.1.4.1.2.6.2.7.8.1.1.2
For the incoming routing information field filter table, determines what type of frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmRIFFilterOutBcastType		1.3.6.1.4.1.2.6.2.7.8.1.1.3
For the outgoing routing information field filter table, determines what type of frames will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	filterARB(1), filterSRB(2), filterBoth(3)

ibmRIFFilterInFilterType		1.3.6.1.4.1.2.6.2.7.8.1.1.4
For the incoming routing information filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmRIFFilterOutFilterType		1.3.6.1.4.1.2.6.2.7.8.1.1.5
For the outgoing routing information field filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmRIFFilterInNotForwarded		1.3.6.1.4.1.2.6.2.7.8.1.1.6
Number of packets not forwarded, in the incoming direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmRIFFilterOutNotForwarded		1.3.6.1.4.1.2.6.2.7.8.1.1.7
Number of packets not forwarded, in the outgoing direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmRIFFilterInTable		1.3.6.1.4.1.2.6.2.7.8.2
Table of routing information field filtering information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RIFFilterInEntry

ibmRIFFilterInEntry		1.3.6.1.4.1.2.6.2.7.8.2.1
Filtering information for a single routing information field on a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RIFFilterInEntry

ibmRIFFilterInIfIndex		1.3.6.1.4.1.2.6.2.7.8.2.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterInRingNumber		1.3.6.1.4.1.2.6.2.7.8.2.1.2
Indicates which ring number to filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterInRingMask		1.3.6.1.4.1.2.6.2.7.8.2.1.3
Mask to allow ibmRIFFilterInRingNumber to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterInBridgeNumber		1.3.6.1.4.1.2.6.2.7.8.2.1.4
Indicates which bridge number to filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterInBridgeMask		1.3.6.1.4.1.2.6.2.7.8.2.1.5
Mask to allow ibmRIFFilterInBridgeNumber to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterInRouteDesignator		1.3.6.1.4.1.2.6.2.7.8.2.1.6
Indicates which route designators in the routing information field are to be used for filtering.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	firstroutedesignator(1), nexttolastroutedesignator(2), allroutedesignators(3)

ibmRIFFilterOutTable		1.3.6.1.4.1.2.6.2.7.8.3
Table of routing information field filtering information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RIFFilterOutEntry

ibmRIFFilterOutEntry		1.3.6.1.4.1.2.6.2.7.8.3.1
Filtering information for a single routing information field on a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RIFFilterOutEntry

ibmRIFFilterOutIfIndex		1.3.6.1.4.1.2.6.2.7.8.3.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterOutRingNumber		1.3.6.1.4.1.2.6.2.7.8.3.1.2
Indicates which ring number to filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterOutRingMask		1.3.6.1.4.1.2.6.2.7.8.3.1.3
Mask to allow ibmRIFFilterOutRingNumber to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterOutBridgeNumber		1.3.6.1.4.1.2.6.2.7.8.3.1.4
Indicates which bridge number to filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterOutBridgeMask		1.3.6.1.4.1.2.6.2.7.8.3.1.5
Mask to allow ibmRIFFilterOutBridgeNumber to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmRIFFilterOutRouteDesignator		1.3.6.1.4.1.2.6.2.7.8.3.1.6
Indicates which route designators in the routing information field are to be used for filtering.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	firstroutedesignator(1), nexttolastroutedesignator(2), allroutedesignators(3)

ibmfrDlcmiTable		1.3.6.1.4.1.2.6.2.8.1
The Parameters for the Data Link Connection Management Interface corresponding to any given ifEntry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmfrDlcmiEntry

ibmfrDlcmiEntry		1.3.6.1.4.1.2.6.2.8.1.1
The Parameters for the Data Link Connection Management Interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmfrDlcmiEntry

ibmfrDlcmiIfIndex		1.3.6.1.4.1.2.6.2.8.1.1.1
The ifIndex value of the corresponding ifEn- try.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmfrDlcmiState		1.3.6.1.4.1.2.6.2.8.1.1.2
This variable states which Data Link Connec- tion Management scheme is active (and by impli- cation, what DLCI it uses) on the Frame Relay interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noLmiConfigured(1), lmiRev1(2), ansiT1-617-D(3), ansiT1-617-B(4)

ibmfrDlcmiAddress		1.3.6.1.4.1.2.6.2.8.1.1.3
This variable states which address format is in use on the Frame Relay interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	q921(1), q922March90(2), q922November90(3), q922(4)

ibmfrDlcmiAddressLen		1.3.6.1.4.1.2.6.2.8.1.1.4
This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address in- cluding the control portion.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	two-octets(2), three-octets(3), four-octets(4)

ibmfrDlcmiPollingInterval		1.3.6.1.4.1.2.6.2.8.1.1.5
This is the number of seconds between succes- sive status enquiry messages.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..30

ibmfrDlcmiFullEnquiryInterval		1.3.6.1.4.1.2.6.2.8.1.1.6
Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

ibmfrDlcmiErrorThreshold		1.3.6.1.4.1.2.6.2.8.1.1.7
This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..10

ibmfrDlcmiMonitoredEvents		1.3.6.1.4.1.2.6.2.8.1.1.8
This is the maximum number of responses to FULL STATUS or LINK INTEGERITY VERIFICATION messages missed before the device will mark the interface down.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..10

ibmfrDlcmiMaxSupportedVCs		1.3.6.1.4.1.2.6.2.8.1.1.9
The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal capability is configured, the agent should respond bad- Value
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmfrDlcmiMulticast		1.3.6.1.4.1.2.6.2.8.1.1.10
This indicates whether the Frame Relay provid- er offers a Multicast Service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nonBroadcast(1), broadcast(2)

ibmfrCircuitTable		1.3.6.1.4.1.2.6.2.8.2
A table containing information about specific Data Link Connection Identifiers and corresponding virtual circuits.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmfrCircuitEntry

ibmfrCircuitEntry		1.3.6.1.4.1.2.6.2.8.2.1
The information regarding a single Data Link Connection Identifier.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmfrCircuitEntry

ibmfrCircuitIfIndex		1.3.6.1.4.1.2.6.2.8.2.1.1
The ifIndex Value of the ifEntry this virtual circuit is layered onto.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmfrCircuitDlci		1.3.6.1.4.1.2.6.2.8.2.1.2
The Data Link Connection Identifier for this virtual circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmfrCircuitState		1.3.6.1.4.1.2.6.2.8.2.1.3
Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by set- ting virtual circuit state to active, or delet- ed by changing Circuit state to deleted. Whether or not the row actually disappears is let to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to inactive to tem- porarily disable a given circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	invalid(1), active(2), inactive(3)

ibmfrCircuitReceivedFECNs		1.3.6.1.4.1.2.6.2.8.2.1.4
Number of frames received from the network in- dicating forward congestion since the virtual circuit was created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmfrCircuitReceivedBECNs		1.3.6.1.4.1.2.6.2.8.2.1.5
Number of frames received from the network in- dicating backward congestion since the virtual circuit was created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmfrCircuitSentFrames		1.3.6.1.4.1.2.6.2.8.2.1.6
The number of frames sent from this virtual circuit since it was created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmfrCircuitSentOctets		1.3.6.1.4.1.2.6.2.8.2.1.7
The number of octets sent from this virtual circuit since it was created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmfrCircuitReceivedFrames		1.3.6.1.4.1.2.6.2.8.2.1.8
Number of frames received over this virtual circuit since it was created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmfrCircuitReceivedOctets		1.3.6.1.4.1.2.6.2.8.2.1.9
Number of octets received over this virtual circuit since it was created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmfrCircuitCreationTime		1.3.6.1.4.1.2.6.2.8.2.1.10
The time when this virtual circuit was created, whether by the Data Link Connection Management Interface or by a SetRequest. The time value is relative to other times on this interface only.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmfrCircuitLastTimeChange		1.3.6.1.4.1.2.6.2.8.2.1.11
The time when last there was a change in the virtual circuit state. The time value is relative to other times on this interface only.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmfrCircuitCommittedBurst		1.3.6.1.4.1.2.6.2.8.2.1.12
This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmfrCircuitExcessBurst		1.3.6.1.4.1.2.6.2.8.2.1.13
This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmfrCircuitThroughput		1.3.6.1.4.1.2.6.2.8.2.1.14
Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement inter- val. If the configured committed burst rate and throughput are both non-zero, the measurement interval T=ibmfrCircuitCommittedBurst/ibmfrCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement in- terval T=ibmfrCircuitExcessBurst/ifSpeed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmfrErrTable		1.3.6.1.4.1.2.6.2.8.3
A table containing information about Errors on the Frame Relay interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmfrErrEntry

ibmfrErrEntry		1.3.6.1.4.1.2.6.2.8.3.1
The error information for a single frame relay interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmfrErrEntry

ibmfrErrIfIndex		1.3.6.1.4.1.2.6.2.8.3.1.1
The ifIndex Value of the corresponding ifEn- try.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmfrErrType		1.3.6.1.4.1.2.6.2.8.3.1.2
The type of error that was last seen on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknownError(1), receiveShort(2), receiveLong(3), illegalDLCI(4), unknownDLCI(5), dlcmiProtoErr(6), dlcmiUnknownIE(7), dlcmiSequenceErr(8), dlcmiUnknownRpt(9)

ibmfrErrData		1.3.6.1.4.1.2.6.2.8.3.1.3
An octet string containing as much of the er- ror packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all in- formation up to the PDU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmfrErrTime		1.3.6.1.4.1.2.6.2.8.3.1.4
The time at which the error was detected. The time value is relative to other times on this interface only.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmdlsVirtualRingSegmentNumber		1.3.6.1.4.1.2.6.2.9.1
The token ring segment number used in all frames passed to or from the IBM 6611 Data Link Switching function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4095

ibmdlsFrameFilterType		1.3.6.1.4.1.2.6.2.9.2
The type of SNA filtering applied using the ibmdlsLocalFrameFilterTable and ibmdlsRemoteFrameFilterTable. If this field = permit(2), then all filters defined for SNA use the action of permitting frames to be forwarded if they meet the criteria given by the source and destination address values. If this field = deny(1), then all filters defined for SNA use the action of denying frames to be forwarded if they meet the criteria given by the source and destination address values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmdlsNameFilterType		1.3.6.1.4.1.2.6.2.9.3
The type of NetBIOS filtering applied using the ibmdlsLocalNameFilterTable and ibmdlsRemoteNameFilterTable. If this field = permit(2), then all filters defined for NetBIOS use the action of permitting frames to be forwarded if they meet the criteria given by the source and destination address values. If this field = deny(1), then all filters defined for NetBIOS use the action of denying frames to be forwarded if they meet the criteria given by the source and destination address values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmdlsRouterTable		1.3.6.1.4.1.2.6.2.9.4
A table of information regarding all routers participating in Data Link Switching.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmdlsRouterEntry

ibmdlsRouterEntry		1.3.6.1.4.1.2.6.2.9.4.1
Information for a single participating router.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmdlsRouterEntry

ibmdlsRouterAddress		1.3.6.1.4.1.2.6.2.9.4.1.1
The IP address of the router participating in Data Link Switching.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ibmdlsRouterStatus		1.3.6.1.4.1.2.6.2.9.4.1.2
The current state of the remote connection
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notActive(1), active(2)

ibmdlsRouterDefinedBy		1.3.6.1.4.1.2.6.2.9.4.1.3
The origin of this entry. user(1) indicates that this router is defined via the Configuration Program. system(2) indicates that this router was defined automatically as a result of a connection request from another router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	user(1), system(2)

ibmdlsRouterInFrames		1.3.6.1.4.1.2.6.2.9.4.1.4
Number of frames received from the partner router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsRouterOutFrames		1.3.6.1.4.1.2.6.2.9.4.1.5
Number of frames sent to the partner router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsLocalFrameFilterTable		1.3.6.1.4.1.2.6.2.9.5
The SNA local frame filter table. This table contains information regarding the filtering of SNA frames received from local LAN segments.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmdlsLocalFrameFilterEntry

ibmdlsLocalFrameFilterEntry		1.3.6.1.4.1.2.6.2.9.5.1
Filter information for a MAC address source-destination pair.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmdlsLocalFrameFilterEntry

ibmdlsLocalFrameFilterID		1.3.6.1.4.1.2.6.2.9.5.1.1
A unique identifier for this filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ibmdlsLocalFrameFilterSrcAddress		1.3.6.1.4.1.2.6.2.9.5.1.2
The source MAC address that this filter is applied to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsLocalFrameFilterSrcMask		1.3.6.1.4.1.2.6.2.9.5.1.3
A mask indicating the bits of the source address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the source address is considered significant.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsLocalFrameFilterDestAddress		1.3.6.1.4.1.2.6.2.9.5.1.4
The destination MAC address that this filter is applied to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsLocalFrameFilterDestMask		1.3.6.1.4.1.2.6.2.9.5.1.5
A mask indicating the bits of the destination address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the destination address is considered significant.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsRemoteFrameFilterTable		1.3.6.1.4.1.2.6.2.9.6
The SNA remote frame filter table. This table contains information regarding the filtering of SNA frames received from other participating DLS routers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmdlsRemoteFrameFilterEntry

ibmdlsRemoteFrameFilterEntry		1.3.6.1.4.1.2.6.2.9.6.1
Filter information for a MAC address source-destination pair.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmdlsRemoteFrameFilterEntry

ibmdlsRemoteFrameFilterID		1.3.6.1.4.1.2.6.2.9.6.1.1
A unique identifier for this filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ibmdlsRemoteFrameFilterSrcAddress		1.3.6.1.4.1.2.6.2.9.6.1.2
The source MAC address that this filter is applied to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsRemoteFrameFilterSrcMask		1.3.6.1.4.1.2.6.2.9.6.1.3
A mask indicating the bits of the source address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the source address is considered significant.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsRemoteFrameFilterDestAddress		1.3.6.1.4.1.2.6.2.9.6.1.4
The destination MAC address that this filter is applied to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsRemoteFrameFilterDestMask		1.3.6.1.4.1.2.6.2.9.6.1.5
A mask indicating the bits of the destination address considered significant when using the filter. For every bit equal to one in the mask, the same bit in the destination address is considered significant.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsLocalNameFilterTable		1.3.6.1.4.1.2.6.2.9.7
The NetBIOS local name filter table. This table contains information regarding the filtering of NetBIOS frames received from local LAN segments.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmdlsLocalNameFilterEntry

ibmdlsLocalNameFilterEntry		1.3.6.1.4.1.2.6.2.9.7.1
Filter information for a NetBIOS source-destination name pair.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmdlsLocalNameFilterEntry

ibmdlsLocalNameFilterID		1.3.6.1.4.1.2.6.2.9.7.1.1
A unique identifier for this filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ibmdlsLocalNameFilterSrcAddress		1.3.6.1.4.1.2.6.2.9.7.1.2
The source NetBIOS name that this filter is applied to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..16)

ibmdlsLocalNameFilterDestAddress		1.3.6.1.4.1.2.6.2.9.7.1.3
The destination NetBIOS name that this filter is applied to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..16)

ibmdlsRemoteNameFilterTable		1.3.6.1.4.1.2.6.2.9.8
The NetBIOS name filter table. This table contains information regarding the filtering of NetBIOS frames received from other participating DLS routers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmdlsRemoteNameFilterEntry

ibmdlsRemoteNameFilterEntry		1.3.6.1.4.1.2.6.2.9.8.1
Filter information for a NetBIOS source-destination name pair.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmdlsRemoteNameFilterEntry

ibmdlsRemoteNameFilterID		1.3.6.1.4.1.2.6.2.9.8.1.1
A unique identifier for this filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ibmdlsRemoteNameFilterSrcAddress		1.3.6.1.4.1.2.6.2.9.8.1.2
The source NetBIOS name that this filter is applied to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..16)

ibmdlsRemoteNameFilterDestAddress		1.3.6.1.4.1.2.6.2.9.8.1.3
The destination NetBIOS name that this filter is applied to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..16)

ibmdlsDefaultDestTable		1.3.6.1.4.1.2.6.2.9.9
Table of default routers for MAC addresses.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmdlsDefaultDestEntry

ibmdlsDefaultDestEntry		1.3.6.1.4.1.2.6.2.9.9.1
Mapping of a MAC address to a default router.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmdlsDefaultDestEntry

ibmdlsDefaultDestAddress		1.3.6.1.4.1.2.6.2.9.9.1.1
The destination address that this table entry applies to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsDefaultRouterAddress		1.3.6.1.4.1.2.6.2.9.9.1.2
The default router used for reaching the destination address in ibmdlsDefaultDestAddress.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ibmdlsDefaultNBDestTable		1.3.6.1.4.1.2.6.2.9.10
Table of default routers for NetBIOS names.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmdlsDefaultNBDestEntry

ibmdlsDefaultNBDestEntry		1.3.6.1.4.1.2.6.2.9.10.1
Mapping of a NetBIOS name to a default router.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmdlsDefaultNBDestEntry

ibmdlsDefaultNBDestName		1.3.6.1.4.1.2.6.2.9.10.1.1
The destination NetBIOS name that this table entry applies to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..16)

ibmdlsDefaultNBRouterAddress		1.3.6.1.4.1.2.6.2.9.10.1.2
The default router used for reaching the destination name in ibmdlsDefaultNBDestName.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ibmdlsStationTable		1.3.6.1.4.1.2.6.2.9.11
Table of configuration information on SNA stations attached to this router.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmdlsStationEntry

ibmdlsStationEntry		1.3.6.1.4.1.2.6.2.9.11.1
Information on a single SNA station attached to this router.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmdlsStationEntry

ibmdlsStationIfIndex		1.3.6.1.4.1.2.6.2.9.11.1.1
The value of IfIndex for the port to which this station is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdlsStationAddress		1.3.6.1.4.1.2.6.2.9.11.1.2
The SDLC address of this station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

ibmdlsStationTransmitWindowCount		1.3.6.1.4.1.2.6.2.9.11.1.3
The number of SDLC information frames to send to this station before turning the line around to get a response.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7

ibmdlsStationRetransmitCount		1.3.6.1.4.1.2.6.2.9.11.1.4
The number of contiguous information frame bursts that will be transmitted to this station before declaring a permanent transmission error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..50

ibmdlsStationRetransmitThreshold		1.3.6.1.4.1.2.6.2.9.11.1.5
The number of information frame transmissions allowed as a percentage of total information frame transmissions. The specified rate is the maximum rate of retransmissions allowed above which an error log entry will be make.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ibmdlsStationForceDisconnectTimeout		1.3.6.1.4.1.2.6.2.9.11.1.6
The number of seconds that the IBM 6611 will wait after requesting a disconnect from the link (DISC) before forcing a disconnect.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..600

ibmdlsStationMaxIfieldSize		1.3.6.1.4.1.2.6.2.9.11.1.7
The value in bytes of the maximum I-field size (a multiple of 256 plus 9).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	265..30729

ibmdlsStationPrimaryRepollTimeout		1.3.6.1.4.1.2.6.2.9.11.1.8
The length of time (in tenths of seconds) that the primary station will wait for a response from the secondary station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..250

ibmdlsStationPrimaryRepollCount		1.3.6.1.4.1.2.6.2.9.11.1.9
The number of times that the primary station will poll the secondary station unsuccessfully before marking the station as not working.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	3..50

ibmdlsStationPrimaryRepollThreshold		1.3.6.1.4.1.2.6.2.9.11.1.10
The number of repolls as a percentage of the total polls sent to the secondary station. The specified percentage equals the maximum rate of repolls allowed, above which the IBM 6611 declares that a temporary error has occurred and logs an entry in the system error log.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..100

ibmdlsStationPrimarySlowListTimeout		1.3.6.1.4.1.2.6.2.9.11.1.11
The number of seconds that the primary station will wait between polls to stations on the slow list.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..60

ibmdlsStationSrcAddress		1.3.6.1.4.1.2.6.2.9.11.1.12
The token ring physical address used for this station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsStationDestAddress		1.3.6.1.4.1.2.6.2.9.11.1.13
The token ring physical address to which this station should be connected. If this information is not available the IBM 6611 Network Processor will return a length of zero for this object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsCirTable		1.3.6.1.4.1.2.6.2.9.12
Table of information on DLS circuits active on this router.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmdlsCirEntry

ibmdlsCirEntry		1.3.6.1.4.1.2.6.2.9.12.1
Information on a DLS circuit.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmdlsCirEntry

ibmdlsCirIfIndex		1.3.6.1.4.1.2.6.2.9.12.1.1
The value of IfIndex for the interface supporting this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdlsCirSrcAddress		1.3.6.1.4.1.2.6.2.9.12.1.2
The MAC address of the source of this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsCirSrcSap		1.3.6.1.4.1.2.6.2.9.12.1.3
The SAP identifier of the source of this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdlsCirDestAddress		1.3.6.1.4.1.2.6.2.9.12.1.4
The MAC address of the destination of this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdlsCirDestSap		1.3.6.1.4.1.2.6.2.9.12.1.5
The SAP identifier of the destination of this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdlsCirPartnerRouterAddress		1.3.6.1.4.1.2.6.2.9.12.1.6
The IP address of the partner router used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ibmdlsCirLocalLinkState		1.3.6.1.4.1.2.6.2.9.12.1.7
The state of the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	opening(1), opened(2), closing(3), inactive(4)

ibmdlsCirLocalLinkSubState		1.3.6.1.4.1.2.6.2.9.12.1.8
The sub-state of the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	calling(1), listening(2), contacted(3), localBusy(4), remoteBusy(5)

ibmdlsCirLocalLinkRouting		1.3.6.1.4.1.2.6.2.9.12.1.9
The routing information field used by the local link portion of this circuit. The routing information field consists of a 2-byte routing control field and up to eight 2-byte route designators.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4..18)

ibmdlsCirLocalLinkTestCmdsSent		1.3.6.1.4.1.2.6.2.9.12.1.10
The number of test commands sent by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkTestCmdsFail		1.3.6.1.4.1.2.6.2.9.12.1.11
The number of test commands failed by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkTestCmdsRcv		1.3.6.1.4.1.2.6.2.9.12.1.12
The number of test commands received by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkDataPktSent		1.3.6.1.4.1.2.6.2.9.12.1.13
The number of sequenced data packets sent by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkDataPktResent		1.3.6.1.4.1.2.6.2.9.12.1.14
The number of sequenced data packets resent by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkMaxContResent		1.3.6.1.4.1.2.6.2.9.12.1.15
The maximum number of contiguous resendings by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkDataPktRcv		1.3.6.1.4.1.2.6.2.9.12.1.16
The number of sequenced data packets received by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkInvalidPktRcv		1.3.6.1.4.1.2.6.2.9.12.1.17
The number of invalid packets received by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkAdpRcvErr		1.3.6.1.4.1.2.6.2.9.12.1.18
The number of data-detected receive errors by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkAdpSendErr		1.3.6.1.4.1.2.6.2.9.12.1.19
The number of data-detected transmit errors by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkRcvInactiveTimeouts		1.3.6.1.4.1.2.6.2.9.12.1.20
The number of inactivity timeouts received by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkCmdPollsSent		1.3.6.1.4.1.2.6.2.9.12.1.21
The number of command polls sent by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkCmdRepollsSent		1.3.6.1.4.1.2.6.2.9.12.1.22
The number of command repolls sent by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalLinkCmdContRepolls		1.3.6.1.4.1.2.6.2.9.12.1.23
The number of continuous repolls sent by the local link station used by this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdlsCirLocalAddress		1.3.6.1.4.1.2.6.2.9.12.1.24
The address (ibmdlsCirSrcAddress or ibmdlsCirDestAddress) that is local on this circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sourceIsLocal(1), destinationIsLocal(2)

ibmpppLinkControlTable		1.3.6.1.4.1.2.6.2.10.1
A table containing PPP-link specific control variables for this managed object. An entry in this table is uniquely identified by the ibmpppLinkControlIndex value comprised by said entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmpppLinkControlEntry

ibmpppLinkControlEntry		1.3.6.1.4.1.2.6.2.10.1.1
Management control information about a particular PPP Link.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmpppLinkControlEntry

ibmpppLinkControlIndex		1.3.6.1.4.1.2.6.2.10.1.1.1
A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that identified by the same value of an ifIndex object instance. The value for each link must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkCRCSize		1.3.6.1.4.1.2.6.2.10.1.1.2
Number of bits used in the CRC on this link. See section 3.1, 'Frame Check Sequence (FCS) Field' on page 5 of RFC 1171. Setting this object to a new value will have effect when this link is next restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ppp-crc-16(16), ppp-crc-32(32)

ibmpppLinkRestartTimerValue		1.3.6.1.4.1.2.6.2.10.1.1.3
The value used for the Restart Timer. It is in units of hundredths of a second. See section 4.3, 'Timers and Counters' on page 20 of RFC 1171.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkMaxRestarts		1.3.6.1.4.1.2.6.2.10.1.1.4
The Max-Restarts parameter described in section 4.3, 'Timers and Counters' on page 20 of RFC 1171.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkLocalMRU		1.3.6.1.4.1.2.6.2.10.1.1.5
The MRU (Maximum Receive Unit) of this node on the link. See section 2.1, page 2, 'Maximum Receive Unit' of RFC 1172. Changing this object will have effect when the link is next restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkRemoteMRU		1.3.6.1.4.1.2.6.2.10.1.1.6
What this node believes is the MRU for the node on the other end of the link. See section 2.1, page 2, 'Maximum Receive Unit' of RFC 1172. Changing this object will immediately cause the local node to use the new MRU when transmitting packets. If this number is increased, then the sender MAY elect to use the new MRU. If the MRU is decreased then the sender MUST use the new MRU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkLocalACCMap		1.3.6.1.4.1.2.6.2.10.1.1.7
The (ACC) Asynchronous-Control-Character-Map for this node. This is the ACC Map that the node on the other end of the link will use when building a packet to send to this node. See section 2.2, page 3, 'Async-Control- Character-Map' of RFC 1172. The IBM 6611 Network Processor always provides a value of zero for this object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

ibmpppLinkRemoteACCMap		1.3.6.1.4.1.2.6.2.10.1.1.8
The (ACC) Asynchronous-Control-Character-Map that this node uses when building a packet to send to the node on the other end of the link. See section 2.2, page 3, 'Async-Control-Character-Map' of RFC 1172. The IBM 6611 Network Processor always provides a value of zero for this object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

ibmpppLinkMagicLoopCount		1.3.6.1.4.1.2.6.2.10.1.1.9
The number of times that this node will do a Magic Number Configuration before deciding that the link is looped back. 0 indicates that the node does not do Magic Number Configuration. -1 indicates that it tries forever. Changing this object takes effect the next time that the link is restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkCommand		1.3.6.1.4.1.2.6.2.10.1.1.10
See section 4.14 on page 13 of RFC 1171. Reading from this variable will return no-op(1). The IBM 6611 Network Processor always provides a value of no-op(1) for this object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	no-op(1), close(2)

ibmpppLinkStatusTable		1.3.6.1.4.1.2.6.2.10.2
A table containing PPP-link status specific information for this managed object. An entry in this table is uniquely identified by the ibmpppLinkStatusIndex value comprised by said entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmpppLinkStatusEntry

ibmpppLinkStatusEntry		1.3.6.1.4.1.2.6.2.10.2.1
Status information about a particular PPP Link.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmpppLinkStatusEntry

ibmpppLinkStatusIndex		1.3.6.1.4.1.2.6.2.10.2.1.1
A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that identified by the same value of an ifIndex object instance. The value for each link must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkVersion		1.3.6.1.4.1.2.6.2.10.2.1.2
The version of LCP that is being run over this link (per RFC 1171). This value currently must be 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkCurrentState		1.3.6.1.4.1.2.6.2.10.2.1.3
The current state of the link automaton. See section 4.1.3. 'State Transition Table' on page 13 of RFC 1171.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	closed(1), listen(2), reqsent(3), ackrecvd(4), acksent(5), open(6), closing(7)

ibmpppLinkPreviousState		1.3.6.1.4.1.2.6.2.10.2.1.4
The immediately previous state of the link automaton. See section 4.1.3. 'State Transition Table' on page 13 of RFC 1171.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	closed(1), listen(2), reqsent(3), ackrecvd(4), acksent(5), open(6), closing(7)

ibmpppLinkChangeTime		1.3.6.1.4.1.2.6.2.10.2.1.5
The value of sysUpTime when the state of the link automaton last changed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmpppLinkMagicNumber		1.3.6.1.4.1.2.6.2.10.2.1.6
This node's Magic Number. See section 2.4, page 7, 'Magic Number' of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkLocalQualityPeriod		1.3.6.1.4.1.2.6.2.10.2.1.7
This is the maximum interval at which this node will transmit Link-Quality-Report Packets. See section 2.5, on page 10 of RFC 1172. This object is in units of microseconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkRemoteQualityPeriod		1.3.6.1.4.1.2.6.2.10.2.1.8
This is the maximum interval at which this node expects that the other node will transmit Link-Quality-Report Packets. See section 2.5, on page 10 of RFC 1172. This object is in units of microseconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkProtocolCompression		1.3.6.1.4.1.2.6.2.10.2.1.9
Indicates the Protocol compression that has been configured on the link. Receive-only(1) indicates that this node can receive compressed packets but won't send them. Send-only(2) indicates that this node will send compressed packets but can not receive them. Receive-and-send(3) indicates that the node will send and can receive compressed packets. None(4) indicates that this node will neither send nor receive compressed packets. See section 2.6, on page 11 of RFC 1172. The IBM 6611 Network Processor always provides a value of none(4) for this object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	receive-only(1), send-only(2), receive-and-send(3), none(4)

ibmpppLinkACCompression		1.3.6.1.4.1.2.6.2.10.2.1.10
Indicates the Address/Control Field compression that has been configured on the link. Receive-only(1) indicates that this node can receive compressed packets but won't send them. Send-only(2) indicates that this node will send compressed packets but can not receive them. Receive-and- send(3) indicates that the node will send and can receive compressed packets. None(4) indicates that this node will neither send nor receive compressed packets. See section 2.7, on page 13 of RFC 1172. The IBM 6611 Network Processor always provides a value of none(4) for this object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	receive-only(1), send-only(2), receive-and-send(3), none(4)

ibmpppLinkMeasurementsValid		1.3.6.1.4.1.2.6.2.10.2.1.11
The current value of the Measurements-Valid state variable used for Link-Quality Management. See section 3.5, page 19, of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkQuality		1.3.6.1.4.1.2.6.2.10.2.1.12
The current quality of the link as declared by the nodes Link-Quality Management modules. No effort is made to define good or bad, nor the policy used to determine it.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	good(1), bad(2)

ibmpppLinkPhysical		1.3.6.1.4.1.2.6.2.10.2.1.13
A reference to MIB definitions specific to the particular physical interface type (e.g. T1) being used by the PPP Link. If the agent is unable to obtain this information, the value of this object will be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ibmpppLinkErrorsTable		1.3.6.1.4.1.2.6.2.10.3
A table containing PPP-link specific statistical information for this managed object. An entry in this table is uniquely identified by the ibmpppLinkErrorsIndex value comprised by said entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmpppLinkErrorsEntry

ibmpppLinkErrorsEntry		1.3.6.1.4.1.2.6.2.10.3.1
Error information about a particular PPP Link.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmpppLinkErrorsEntry

ibmpppLinkErrorsIndex		1.3.6.1.4.1.2.6.2.10.3.1.1
A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that identified by the same value of an ifIndex object instance. The value for each link must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkBadAddresses		1.3.6.1.4.1.2.6.2.10.3.1.2
The number of packets received with an incorrect Address Field. See section 3.1, Page 5, 'Address Field' of RFC 1171.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkLastBadAddress		1.3.6.1.4.1.2.6.2.10.3.1.3
The most recent incorrect address received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmpppLinkBadControls		1.3.6.1.4.1.2.6.2.10.3.1.4
The number of packets received on this link with an incorrect Control Field. See Section 3.1, Page 5, 'Flag Sequence' of RFC 1171.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkLastBadControl		1.3.6.1.4.1.2.6.2.10.3.1.5
The most recent incorrect Control Field received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmpppLinkLastUnknownProtocol		1.3.6.1.4.1.2.6.2.10.3.1.6
The most recently received unknown Protocol. An unknown Protocol is one which has a well-formed Protocol number, but which the PPP implementation does not know how to handle.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmpppLinkInvalidProtocols		1.3.6.1.4.1.2.6.2.10.3.1.7
The number of times that a packet has been received with an invalid Protocol specified in the Protocol Field. An invalid Protocol is one which does not conform to the requirements of section 3.1, page 5 of RFC 1171.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkLastInvalidProtocol		1.3.6.1.4.1.2.6.2.10.3.1.8
The most recently received invalid Protocol.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmpppLinkPacketTooLongs		1.3.6.1.4.1.2.6.2.10.3.1.9
The number of received packets that have been discarded because their length exceeded the MRU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkBadCRCs		1.3.6.1.4.1.2.6.2.10.3.1.10
The number of received packets that have been discarded due to having an incorrect CRC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkConfigTimeouts		1.3.6.1.4.1.2.6.2.10.3.1.11
The number of Configure Request packets that have timed out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkTerminateTimeouts		1.3.6.1.4.1.2.6.2.10.3.1.12
The number of Terminate Request packets that have timed out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkQualityTable		1.3.6.1.4.1.2.6.2.10.4
A table containing PPP-link specific statistical information for this managed object. An entry in this table is uniquely identified by the ibmpppLinkQualityIndex value comprised by said entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmpppLinkQualityEntry

ibmpppLinkQualityEntry		1.3.6.1.4.1.2.6.2.10.4.1
Link Quality Management information about a particular PPP Link.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmpppLinkQualityEntry

ibmpppLinkQualityIndex		1.3.6.1.4.1.2.6.2.10.4.1.1
A unique value for each PPP link. Its value ranges between 1 and the value of ifNumber. The interface identified by a particular value of this index is that identified by the same value of an ifIndex object instance. The value for each link must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLinkInTxLQRs		1.3.6.1.4.1.2.6.2.10.4.1.2
The current value of In-Tx-LQRs used in Link-Quality Management. See section 3.5, page 19, of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkInTxPackets		1.3.6.1.4.1.2.6.2.10.4.1.3
The current value of the In-Tx-Packets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkLastOutTxPackets		1.3.6.1.4.1.2.6.2.10.4.1.4
The current value of the Last-Out-Tx-Packets-Ctr counter used bu Link-Quality Management. See section 3.5, page 19, of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkInTxOctets		1.3.6.1.4.1.2.6.2.10.4.1.5
The current value of the In-Tx-Octets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkLastOutTxOctets		1.3.6.1.4.1.2.6.2.10.4.1.6
The current value of the Last-Out-Tx-Octets-Counter counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkInRxPackets		1.3.6.1.4.1.2.6.2.10.4.1.7
The current value of the In-Rx-Packets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkLastInRxPackets		1.3.6.1.4.1.2.6.2.10.4.1.8
The current value of the Last-In-Rx-Packets-Ctr counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkInRxOctets		1.3.6.1.4.1.2.6.2.10.4.1.9
The current value of the In-Rx-Octets counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLinkLastInRxOctets		1.3.6.1.4.1.2.6.2.10.4.1.10
The current value of the Last-In-Rx-Octets-Ctr counter used for Link-Quality Management. See section 3.5, page 19, of RFC 1172.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppProtocolTables		1.3.6.1.4.1.2.6.2.10.5
OBJECT IDENTIFIER

ibmpppIPTable		1.3.6.1.4.1.2.6.2.10.5.1
A table containing specific information for the running of the IP over PPP in this managed object. An entry in this table is uniquely identified by the ibmpppIPLinkNumber value comprised by said entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmpppIPEntry

ibmpppIPEntry		1.3.6.1.4.1.2.6.2.10.5.1.1
All information pertinant to running the IP over a single PPP link.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmpppIPEntry

ibmpppIPLinkNumber		1.3.6.1.4.1.2.6.2.10.5.1.1.1
The value of ibmpppLinkIndex for the link over which this instance of the IP is being run.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppIPRejects		1.3.6.1.4.1.2.6.2.10.5.1.1.2
The number of Protocol Reject Messages received when attempting to send an IP packet over the link identified by ibmpppIPLinkNumber.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppIPInPackets		1.3.6.1.4.1.2.6.2.10.5.1.1.3
The number of IP packets received on the link identified by ibmpppIPLinkNumber.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppIPInOctets		1.3.6.1.4.1.2.6.2.10.5.1.1.4
The number of octets received in IP packets received on the link identified by ibmpppIPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppIPOutPackets		1.3.6.1.4.1.2.6.2.10.5.1.1.5
The number of IP packets sent on the link identified by ibmpppIPLinkNumber.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppIPOutOctets		1.3.6.1.4.1.2.6.2.10.5.1.1.6
The number of octets all in IP Packets sent on the link identified by ibmpppIPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppIPCPTable		1.3.6.1.4.1.2.6.2.10.5.2
A table containing specific information for the running of the IPCP over PPP in this managed object. An entry in this table is uniquely identified by the ibmpppIPCPLinkNumber value comprised by said entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmpppIPCPEntry

ibmpppIPCPEntry		1.3.6.1.4.1.2.6.2.10.5.2.1
All information pertinant to running the IPCP over a single PPP link.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmpppIPCPEntry

ibmpppIPCPLinkNumber		1.3.6.1.4.1.2.6.2.10.5.2.1.1
The value of ibmpppLinkIndex for the link over which this instance of the IPCP is being run.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppIPCPRejects		1.3.6.1.4.1.2.6.2.10.5.2.1.2
The number of Protocol Reject Messages received when attempting to send an IPCP Packet over the link identified by ibmpppIPCPLinkNumber.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppIPCPInPackets		1.3.6.1.4.1.2.6.2.10.5.2.1.3
The number of IPCP packets received on the link identified by ibmpppIPCPLinkNumber.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppIPCPInOctets		1.3.6.1.4.1.2.6.2.10.5.2.1.4
The number of octets received in IPCP packets received on the link identified by ibmpppIPCPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppIPCPOutPackets		1.3.6.1.4.1.2.6.2.10.5.2.1.5
The number of IPCP packets sent on the link identified by ibmpppIPLinkNumber.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppIPCPOutOctets		1.3.6.1.4.1.2.6.2.10.5.2.1.6
The number of octets all in IPCP packets sent on the link identified by ibmpppIPCPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppIPCPCompressionType		1.3.6.1.4.1.2.6.2.10.5.2.1.7
The compression type used on this link as defined in section 5.2 of RFC 1172. The numerical values that this object can be are the same as the numerical values that are included in the IPCP compression option configuration packets. The IBM 6611 Network Processor always provides a value of none(1) for this object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), van-jacobson-compressed-tcp(2)

ibmpppLCPTable		1.3.6.1.4.1.2.6.2.10.5.3
A table containing specific information for the running of LCP over PPP in this managed object. An entry in this table is uniquely identified by the ibmpppLCPLinkNumber value comprised by said entry.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmpppLCPEntry

ibmpppLCPEntry		1.3.6.1.4.1.2.6.2.10.5.3.1
All information pertinant to running LCP over a single PPP link.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmpppLCPEntry

ibmpppLCPLinkNumber		1.3.6.1.4.1.2.6.2.10.5.3.1.1
The value of ibmpppLinkIndex for the link over which this instance of LCP is being run.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmpppLCPRejects		1.3.6.1.4.1.2.6.2.10.5.3.1.2
The number of Protocol Reject Messages received when attempting to send an LCP packet over the link identified by ibmpppLCPLinkNumber. This really ought not to happen.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInPackets		1.3.6.1.4.1.2.6.2.10.5.3.1.3
The number of LCP packets received on the link identified by ibmpppLCPLinkNumber.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInOctets		1.3.6.1.4.1.2.6.2.10.5.3.1.4
The number of octets received in LCP packets received on the link identified by ibmpppLCPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutPackets		1.3.6.1.4.1.2.6.2.10.5.3.1.5
The number of LCP packets sent on the link identified by ibmpppLCPLinkNumber.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutOctets		1.3.6.1.4.1.2.6.2.10.5.3.1.6
The number of octets all in LCP packets sent on the link identified by ibmpppLCPLinkNumber. Only octets in the PPP Information Field are counted. Octets inserted for transparency are not counted. Padding octets are not counted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutCRs		1.3.6.1.4.1.2.6.2.10.5.3.1.7
Number of Configuration Request packets sent on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInCRs		1.3.6.1.4.1.2.6.2.10.5.3.1.8
Number of Configuration Request packets received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutCAs		1.3.6.1.4.1.2.6.2.10.5.3.1.9
Number of Configuration Acknowledge packets sent on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInCAs		1.3.6.1.4.1.2.6.2.10.5.3.1.10
Number of Configuration Acknowledge packets received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutCNs		1.3.6.1.4.1.2.6.2.10.5.3.1.11
Number of Configuration NAK packets sent on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInCNs		1.3.6.1.4.1.2.6.2.10.5.3.1.12
Number of Configuration NAK packets received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutCRejs		1.3.6.1.4.1.2.6.2.10.5.3.1.13
Number of Configuration Reject packets sent on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInCRejs		1.3.6.1.4.1.2.6.2.10.5.3.1.14
Number of Configuration Reject packets received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutTRs		1.3.6.1.4.1.2.6.2.10.5.3.1.15
Number of Terminate Request packets sent on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInTRs		1.3.6.1.4.1.2.6.2.10.5.3.1.16
Number of Terminate Request packets received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutTAs		1.3.6.1.4.1.2.6.2.10.5.3.1.17
Number of Terminate Acknowledge packets sent on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInTAs		1.3.6.1.4.1.2.6.2.10.5.3.1.18
Number of Terminate Acknowledge packets received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutCodeRejs		1.3.6.1.4.1.2.6.2.10.5.3.1.19
Number of Code Reject packets sent on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInCodeRejs		1.3.6.1.4.1.2.6.2.10.5.3.1.20
Number of Code Reject packets received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutEchoReqs		1.3.6.1.4.1.2.6.2.10.5.3.1.21
Number of Echo Request packets sent on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInEchoReqs		1.3.6.1.4.1.2.6.2.10.5.3.1.22
Number of Echo Request packets received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutEchoReps		1.3.6.1.4.1.2.6.2.10.5.3.1.23
Number of Echo Reply packets sent on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInEchoReps		1.3.6.1.4.1.2.6.2.10.5.3.1.24
Number of Echo Reply packets received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPOutDiscReqs		1.3.6.1.4.1.2.6.2.10.5.3.1.25
Number of Discard Request packets sent on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmpppLCPInDiscReqs		1.3.6.1.4.1.2.6.2.10.5.3.1.26
Number of Discard Request packets received on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpForwarding		1.3.6.1.4.1.2.6.2.11.1
Indicates if this node is acting as an XNS router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	forwarding(1), not-forwarding(2)

ibmxnsConfigTable		1.3.6.1.4.1.2.6.2.11.4
The table of XNS configuration information gathered on a per-interface basis.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmXnsConfigEntry

ibmxnsConfigEntry		1.3.6.1.4.1.2.6.2.11.4.1
XNS configuration information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmXnsConfigEntry

ibmxnsPortIfIndex		1.3.6.1.4.1.2.6.2.11.4.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmxnsPortStatus		1.3.6.1.4.1.2.6.2.11.4.1.2
The status of the XNS protocol stack on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

ibmxnsidpChecksum		1.3.6.1.4.1.2.6.2.11.4.1.3
Indicates the type of checksumming being done by IDP.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), header(2), packet(3)

ibmxnsErrpActive		1.3.6.1.4.1.2.6.2.11.4.1.4
Indicates if this port is originating error protocol packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), suppressed(2)

ibmxnsLoopbackActive		1.3.6.1.4.1.2.6.2.11.4.1.5
Indicates if this port will use the hardware to loopback locally addressed packets or return the packet to the system via a software loopback.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	software-loopback-active(1), hardware-loopback-active(2)

ibmxnsidpInReceives		1.3.6.1.4.1.2.6.2.11.5
Total number of IDP datagrams received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpBcastInReceives		1.3.6.1.4.1.2.6.2.11.6
Number of IDP broadcast datagrams received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpMcastInReceives		1.3.6.1.4.1.2.6.2.11.7
Number of IDP multicast datagrams received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpInDiscards		1.3.6.1.4.1.2.6.2.11.8
Number of incoming IDP datagrams discarded due to lack of resources.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpOutRequests		1.3.6.1.4.1.2.6.2.11.11
Number of IDP datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmxnsidpForwDatagrams.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpBcastOutRequests		1.3.6.1.4.1.2.6.2.11.12
Number of IDP broadcast datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmxnsidpForwDatagrams.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpMcastOutRequests		1.3.6.1.4.1.2.6.2.11.13
Number of IDP multicast datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmxnsidpForwDatagrams.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpForwDatagrams		1.3.6.1.4.1.2.6.2.11.14
Number of IDP datagrams for which an attempt was made to forward.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpOutDiscards		1.3.6.1.4.1.2.6.2.11.15
Total number of outgoing IDP datagrams discarded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpOutNoRoutes		1.3.6.1.4.1.2.6.2.11.16
Number of outgoing IDP datagrams discarded because no route was available to the specified destination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpRoutingDiscards		1.3.6.1.4.1.2.6.2.11.17
Number of routing entries discarded even though they were valid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpZeroDirBcast		1.3.6.1.4.1.2.6.2.11.19
Number of IDP datagrams forwarded to the system due to zeronet broadcast.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpTooSmall		1.3.6.1.4.1.2.6.2.11.20
Number of IDP datagrams with len < the size of an IDP header.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpBadLen		1.3.6.1.4.1.2.6.2.11.21
Number of IDP datagrams with number of bytes in the packet less than the number of bytes specified in the IDP header field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpBadSum		1.3.6.1.4.1.2.6.2.11.22
Number of IDP datagrams with a bad checksum
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsidpBadTTL		1.3.6.1.4.1.2.6.2.11.23
Number of IDP datagrams with TTL value > IDP maximum hopcount of 16.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsErrUnspec		1.3.6.1.4.1.2.6.2.11.24
Number of Error packets generated because an IDP datagram was dropped for unspecified reasons.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsErrChecksum		1.3.6.1.4.1.2.6.2.11.25
Number of Error packets generated because an IDP datagram was dropped due a bad checksum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsErrUnreach		1.3.6.1.4.1.2.6.2.11.26
Number of Error packets generated because an IDP datagram was dropped due to an unreachable host.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsErrTTLExpired		1.3.6.1.4.1.2.6.2.11.27
Number of Error packets generated because an IDP datagram was dropped because its time-to-live counter had expired.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsErrTooBig		1.3.6.1.4.1.2.6.2.11.28
Number of Error packets generated because an IDP datagram was dropped because it was too large to be forwarded through this node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsErrResources		1.3.6.1.4.1.2.6.2.11.29
Number of Error packets generated because an IDP datagram was dropped due to lack of resources.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsErrCongWarn		1.3.6.1.4.1.2.6.2.11.30
Number of Error packets generated for congestion warnings.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsErrCongDiscard		1.3.6.1.4.1.2.6.2.11.31
Number of Error packets generated for congestion discards.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsErrSquelched		1.3.6.1.4.1.2.6.2.11.32
Number of error packets that would have been generated, except that the faulted datagram had one of the following conditions: - was sent as link layer broadcast - NS destination was broadcast - NS source was 0, loopback, or broadcast
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsErrOutMsgs		1.3.6.1.4.1.2.6.2.11.33
Total number of error packets generated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsAddrTable		1.3.6.1.4.1.2.6.2.11.34
The XNS Address Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmXnsAddrEntry

ibmxnsAddrEntry		1.3.6.1.4.1.2.6.2.11.34.1
An entry in the XNS address table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmXnsAddrEntry

ibmxnsAddrAddress		1.3.6.1.4.1.2.6.2.11.34.1.1
The XNS address to which this entry's addressing information pertains.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(12)

ibmxnsAddrIfIndex		1.3.6.1.4.1.2.6.2.11.34.1.2
The interface index which identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmxnsRouteTable		1.3.6.1.4.1.2.6.2.11.35
The XNS Route Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmXnsRouteEntry

ibmxnsRouteEntry		1.3.6.1.4.1.2.6.2.11.35.1
An entry in the XNS route table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmXnsRouteEntry

ibmxnsRouteDest		1.3.6.1.4.1.2.6.2.11.35.1.1
The desination network of this route.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(12)

ibmxnsRouteIfIndex		1.3.6.1.4.1.2.6.2.11.35.1.2
The index value which identifies the local interface through which the next hop of this route should be reached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmxnsRouteNextHop		1.3.6.1.4.1.2.6.2.11.35.1.3
The XNS network address of the next hop of this route.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

ibmxnsRouteMetric		1.3.6.1.4.1.2.6.2.11.35.1.4
The hop count to the destination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmxnsRouteUse		1.3.6.1.4.1.2.6.2.11.35.1.5
Reference counter for this route.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmxnsFilterTable		1.3.6.1.4.1.2.6.2.11.36
The XNS Filter Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmXnsFilterEntry

ibmxnsFilterEntry		1.3.6.1.4.1.2.6.2.11.36.1
An entry in the XNS filter table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmXnsFilterEntry

ibmxnsFilterIfIndex		1.3.6.1.4.1.2.6.2.11.36.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmxnsFilterNumber		1.3.6.1.4.1.2.6.2.11.36.1.2
A unique integer identifying this filter entry for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmxnsFilterValue		1.3.6.1.4.1.2.6.2.11.36.1.3
An octet string representing the IDP header information required by this filter entry. Incoming IDP packets will be bitwise ANDed with the value of ibmxnsFilterMask, and if the result is equal to the value of this object, the packet will be filtered according to the value of ibmxnsFilterType. The structure of an IDP header is as follows: BIT16 checksum BIT16 length BIT8 transport control (ie. hop count) BIT8 packet type BIT32 destination network address BIT48 destination host address BIT16 destination socket BIT32 source network address BIT48 source host address BIT16 source socket
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(30)

ibmxnsFilterMask		1.3.6.1.4.1.2.6.2.11.36.1.4
An octet string indicating the parts of the IDP header relevant to this filter entry. This mask will be bitwise ANDed with the IDP packet; if the result is equal to the value of ibmxnsFilterValue, the packet will be filtered according to the value of ibmxnsFilterType.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(30)

ibmxnsFilterType		1.3.6.1.4.1.2.6.2.11.36.1.5
Determines whether this filter is a deny entry or a permit entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmxnsFilterHCCompare		1.3.6.1.4.1.2.6.2.11.36.1.6
Indicates the relational association desired if filtering is being done based on hop count. If filtering is not being done based on hop count (that is, if the hop count portion of ibmxnsFilterMask is 0) the value of this object will be none(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), less-than(2), less-than-equal(3), equal(4), greater-than-equal(5), greater-than(6)

ibmxnsFilterUse		1.3.6.1.4.1.2.6.2.11.36.1.7
Usage count for this filter entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpForwarding		1.3.6.1.4.1.2.6.2.12.1
Indicates if this node is acting as an IPX router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	forwarding(1), not-forwarding(2)

ibmipxConfigTable		1.3.6.1.4.1.2.6.2.12.4
The table of IPX configuration information gathered on a per-interface basis.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmIpxConfigEntry

ibmipxConfigEntry		1.3.6.1.4.1.2.6.2.12.4.1
IPX configuration information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmIpxConfigEntry

ibmipxPortIfIndex		1.3.6.1.4.1.2.6.2.12.4.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxPortStatus		1.3.6.1.4.1.2.6.2.12.4.1.2
The status of the IPX protocol stack on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), inactive(2)

ibmipxidpChecksum		1.3.6.1.4.1.2.6.2.12.4.1.3
Indicates the type of checksumming being done by IDP.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), header(2), packet(3)

ibmipxLoopbackActive		1.3.6.1.4.1.2.6.2.12.4.1.5
Indicates if this port will use the hardware to loopback locally addressed packets or return the packet to the system via a software loopback.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	software-loopback-active(1), hardware-loopback-active(2)

ibmipxidpInReceives		1.3.6.1.4.1.2.6.2.12.5
Total number of IDP datagrams received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpBcastInReceives		1.3.6.1.4.1.2.6.2.12.6
Number of IDP broadcast datagrams received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpInDiscards		1.3.6.1.4.1.2.6.2.12.8
Number of incoming IDP datagrams discarded due to lack of resources.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpInAddrErrors		1.3.6.1.4.1.2.6.2.12.10
Number of incoming IDP datagrams discarded because the network portion of the address did not match the configured address for this host.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpOutRequests		1.3.6.1.4.1.2.6.2.12.11
Number of IDP datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmipxidpForwDatagrams.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpBcastOutRequests		1.3.6.1.4.1.2.6.2.12.12
Number of IDP broadcast datagrams generated by local IDP user protocols. This counter does not include any datagrams counted in ibmipxidpForwDatagrams.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpForwDatagrams		1.3.6.1.4.1.2.6.2.12.14
Number of IDP datagrams for which an attempt was made to forward.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpOutDiscards		1.3.6.1.4.1.2.6.2.12.15
Total number of outgoing IDP datagrams discarded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpOutNoRoutes		1.3.6.1.4.1.2.6.2.12.16
Number of outgoing IDP datagrams discarded because no route was available to the specified destination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpRoutingDiscards		1.3.6.1.4.1.2.6.2.12.17
Number of routing entries discarded even though they were valid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpZeroDirBcast		1.3.6.1.4.1.2.6.2.12.19
Number of IDP datagrams forwarded to the system due to zeronet broadcast.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpTooSmall		1.3.6.1.4.1.2.6.2.12.20
Number of IDP datagrams with len < the size of an IDP header.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpBadLen		1.3.6.1.4.1.2.6.2.12.21
Number of IDP datagrams with number of bytes in the packet less than the number of bytes specified in the IDP header field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpBadSum		1.3.6.1.4.1.2.6.2.12.22
Number of IDP datagrams with a bad checksum
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxidpBadTTL		1.3.6.1.4.1.2.6.2.12.23
Number of IDP datagrams with TTL value > IDP maximum hopcount of 16.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxAddrTable		1.3.6.1.4.1.2.6.2.12.34
The IPX Address Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmIpxAddrEntry

ibmipxAddrEntry		1.3.6.1.4.1.2.6.2.12.34.1
An entry in the IPX address table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmIpxAddrEntry

ibmipxAddrAddress		1.3.6.1.4.1.2.6.2.12.34.1.1
The IPX address to which this entry's addressing information pertains.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(12)

ibmipxAddrIfIndex		1.3.6.1.4.1.2.6.2.12.34.1.2
The interface index which identifies the interface to which this entry is applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxRouteTable		1.3.6.1.4.1.2.6.2.12.35
The IPX Route Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmIpxRouteEntry

ibmipxRouteEntry		1.3.6.1.4.1.2.6.2.12.35.1
An entry in the IPX route table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmIpxRouteEntry

ibmipxRouteDest		1.3.6.1.4.1.2.6.2.12.35.1.1
The desination network of this route.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(12)

ibmipxRouteIfIndex		1.3.6.1.4.1.2.6.2.12.35.1.2
The index value which identifies the local interface through which the next hop of this route should be reached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxRouteNextHop		1.3.6.1.4.1.2.6.2.12.35.1.3
The IPX network address of the next hop of this route.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

ibmipxRouteMetric		1.3.6.1.4.1.2.6.2.12.35.1.4
The hop count to the destination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxRouteUse		1.3.6.1.4.1.2.6.2.12.35.1.5
Reference counter for this route.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxFilterTable		1.3.6.1.4.1.2.6.2.12.36
The IPX Filter Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmIpxFilterEntry

ibmipxFilterEntry		1.3.6.1.4.1.2.6.2.12.36.1
An entry in the IPX filter table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmIpxFilterEntry

ibmipxFilterIfIndex		1.3.6.1.4.1.2.6.2.12.36.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxFilterNumber		1.3.6.1.4.1.2.6.2.12.36.1.2
A unique integer identifying this filter entry for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxFilterValue		1.3.6.1.4.1.2.6.2.12.36.1.3
An octet string representing the IDP header information required by this filter entry. Incoming IDP packets will be bitwise ANDed with the value of ibmipxFilterMask, and if the result is equal to the value of this object, the packet will be filtered according to the value of ibmipxFilterType. The structure of an IDP header is as follows: BIT16 checksum BIT16 length BIT8 transport control (ie. hop count) BIT8 packet type BIT32 destination network address BIT48 destination host address BIT16 destination socket BIT32 source network address BIT48 source host address BIT16 source socket
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(30)

ibmipxFilterMask		1.3.6.1.4.1.2.6.2.12.36.1.4
An octet string indicating the parts of the IDP header relevant to this filter entry. This mask will be bitwise ANDed with the IDP packet; if the result is equal to the value of ibmipxFilterValue, the packet will be filtered according to the value of ibmipxFilterType.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(30)

ibmipxFilterType		1.3.6.1.4.1.2.6.2.12.36.1.5
Determines whether this filter is a deny entry or a permit entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmipxFilterHCCompare		1.3.6.1.4.1.2.6.2.12.36.1.6
Indicates the relational association desired if filtering is being done based on hop count. If filtering is not being done based on hop count (that is, if the hop count portion of ibmipxFilterMask is 0) the value of this object will be none(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), less-than(2), less-than-equal(3), equal(4), greater-than-equal(5), greater-than(6)

ibmipxFilterUse		1.3.6.1.4.1.2.6.2.12.36.1.7
Usage count for this filter entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxsapStatInRequests		1.3.6.1.4.1.2.6.2.12.37
Number of SAP requests received by this entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxsapStatOutRequests		1.3.6.1.4.1.2.6.2.12.38
Number of SAP requests sent by this entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxsapStatInResponses		1.3.6.1.4.1.2.6.2.12.39
Number of SAP responses received by this entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxsapStatOutResponses		1.3.6.1.4.1.2.6.2.12.40
Number of SAP responses sent by this entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxsapStatInErrors		1.3.6.1.4.1.2.6.2.12.41
Number of incoming SAP packets discarded due to errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxsapStatOutDiscards		1.3.6.1.4.1.2.6.2.12.42
Number of outgoing SAP packets discarded due to lack of resources.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmipxsapServerTable		1.3.6.1.4.1.2.6.2.12.43
Table of IPX servers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmIpxsapServerEntry

ibmipxsapServerEntry		1.3.6.1.4.1.2.6.2.12.43.1
Information on a single server.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmIpxsapServerEntry

ibmipxsapServerType		1.3.6.1.4.1.2.6.2.12.43.1.1
The type of this server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxsapServerNet		1.3.6.1.4.1.2.6.2.12.43.1.2
The IPX network number of this server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

ibmipxsapServerHost		1.3.6.1.4.1.2.6.2.12.43.1.3
The IPX host address of this server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmipxsapServerSocket		1.3.6.1.4.1.2.6.2.12.43.1.4
The IPX socket number this server uses to advertise its service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxsapServerName		1.3.6.1.4.1.2.6.2.12.43.1.5
The name of this server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmipxsapServerAge		1.3.6.1.4.1.2.6.2.12.43.1.6
The number of seconds since this server entry was updated by the SAP protocol.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxsapServerHops		1.3.6.1.4.1.2.6.2.12.43.1.7
The number of network hops required to reach this server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxsapServerIfIndex		1.3.6.1.4.1.2.6.2.12.43.1.8
The interface which is used to reach this server. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxsapServerIndex		1.3.6.1.4.1.2.6.2.12.43.1.9
A unique number identifying servers advertised at the same IPX network and host address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmipxsapServerRequestsFiltered		1.3.6.1.4.1.2.6.2.12.43.1.10
Number of times a request for this server has been filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cylink		1.3.6.1.4.1.2.6.2.3.1
OBJECT IDENTIFIER

cylinkStatusTable		1.3.6.1.4.1.2.6.2.3.1.1
The cylink Status table. This table contains information about the current state of the Cylink CSUs attached to the system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CYLINKStatusEntry

cylinkStatusEntry		1.3.6.1.4.1.2.6.2.3.1.1.1
An entry in the cylink Status table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CYLINKStatusEntry

cylinkIndex		1.3.6.1.4.1.2.6.2.3.1.1.1.1
An index value that uniquely identifies a cylink system interface. The interface identified by a particular value of this index is the same interface as identified by the same value in an ifIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cylinkLinkState		1.3.6.1.4.1.2.6.2.3.1.1.1.2
The current state of the link. The meanings of the values are: cylinkNotConnected(1) The link is not physically connected to the CSU. This may be due to loss of input circuit or loss of output circuit. cylinkNoInput(2) The input circuit is not connected. cylinkNoOutput(3) The output circuit is not connected. cylinkConnected(4) The link is connected to the CSU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkNotConnected(1), cylinkNoInput(2), cylinkNoOutput(3), cylinkConnected(4)

cylinkLoopback		1.3.6.1.4.1.2.6.2.3.1.1.1.3
The loopback mode of the link. The meaning of values are: cylinkNoLoopback(1) The link is not in loopback mode. cylinkNearEndLoopback(2) The link has been placed in loopback mode at the near end: data is being looped back within the local CSU. cylinkFarEndLoopback(3) The link has been placed in loopback mode at the far end: data is being looped across the link to the remote CSU and back.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkNoLoopback(1), cylinkNearEndLoopback(2), cylinkFarEndLoopback(3)

cylinkQRSS		1.3.6.1.4.1.2.6.2.3.1.1.1.4
The Quasi-Random Signal Sequence test mode of the CSU. The value of the meanings are: cylinkNoQRSS(1) The CSU is not in QRSS mode. cylinkQRSSMaster(2) The CSU is transmitting a QRSS test pattern. cylinkQRSSSlave(3) The CSU is receiving a QRSS test pattern.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkNoQRSS(1), cylinkQRSSMaster(2), cylinkQRSSSlave(3)

cylinkConfigTable		1.3.6.1.4.1.2.6.2.3.1.3
The cylink Configuration table. This table contains information about the configuration of the Cylink CSUs attached to the system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CYLINKConfigEntry

cylinkConfigEntry		1.3.6.1.4.1.2.6.2.3.1.3.1
An entry in the cylink Configuration table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CYLINKConfigEntry

cylinkConfigIndex		1.3.6.1.4.1.2.6.2.3.1.3.1.1
The index value which uniquely identifies the CSU to which this entry is applicable. The CSU identified by a particular value of this index is the same CSU as identified by the same value in a cylinkIndex object instance.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cylinkSerialNumber		1.3.6.1.4.1.2.6.2.3.1.3.1.2
The manufacturer's serial number of this CSU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cylinkSoftwareVersion		1.3.6.1.4.1.2.6.2.3.1.3.1.3
The version number of the microcode running in the CSU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..4)

cylinkDTEFraming		1.3.6.1.4.1.2.6.2.3.1.3.1.4
The DTE framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and the network interface is ESF framed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkDTEFramingD4(0), cylinkDTEFramingESF(1)

cylinkNetworkFraming		1.3.6.1.4.1.2.6.2.3.1.3.1.5
The network framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and the network interface is ESF framed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkNetworkFramingD4(0), cylinkNetworkFramingESF(1)

cylinkDTEDS1Mode		1.3.6.1.4.1.2.6.2.3.1.3.1.6
The DTE DS-1 mode selected (B8ZS, or AMI).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkDTEDS1ModeB8ZS(0), cylinkDTEDS1ModeAMI(1)

cylinkNetworkDS1Mode		1.3.6.1.4.1.2.6.2.3.1.3.1.7
The network DS-1 mode selected (B8ZS, or AMI).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkNetworkDS1ModeB8ZS(0), cylinkNetworkDS1ModeAMI(1)

cylinkOnesResponsibility		1.3.6.1.4.1.2.6.2.3.1.3.1.8
The component selected for Ones Density Responsibility (DTE, or CSU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkOnesResponsibilityDTE(0), cylinkOnesResponsibilityACSU(1)

cylinkOnesControl		1.3.6.1.4.1.2.6.2.3.1.3.1.9
The Ones Density Control selected (LSB 24, D4 FRM, or ESF DL).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkOnesControlLSB24(0), cylinkOnesControlD4FRM(1), cylinkOnesControlESFDL(2)

cylinkZeroProtection		1.3.6.1.4.1.2.6.2.3.1.3.1.10
The Consecutive Zero Control selected (15, or 80). This determines the the maximum number of consecutive zeros allowed in the data stream before a one is forced.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkZeroProtection80(0), cylinkZeroProtection15(1)

cylinkClockSource		1.3.6.1.4.1.2.6.2.3.1.3.1.11
The transmit clock source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkClockSourceNetwork(0), cylinkClockSourceDTE(1), cylinkClockSourceExternal(2), cylinkClockSourceInternal(3)

cylinkClockFrequency		1.3.6.1.4.1.2.6.2.3.1.3.1.12
The external clock frequency selected (56 kHz, 256 kHz, 1.344 MHz, 1.544 MHz).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkClockFreq-56kHz(0), cylinkClockFreq-256kHz(1), cylinkClockFreq-1-344MHz(2), cylinkClockFreq-1-544MHz(3)

cylinkClockBackup		1.3.6.1.4.1.2.6.2.3.1.3.1.13
The transmit clock backup source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkClockBackupNetwork(0), cylinkClockBackupDTE(1), cylinkClockBackupExternal(2), cylinkClockBackupInternal(3)

cylinkDIUFrequency		1.3.6.1.4.1.2.6.2.3.1.3.1.14
The DIU frequency selected for NRZ DIUs (767 kbps, 1.244 Mbps, 1.528 Mbps, 1.536 Mbps).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkDIUFreq-768kbps(0), cylinkDIUFreq-1-344Mbps(1), cylinkDIUFreq-1-528Mbps(2), cylinkDIUFreq-1-536Mbps(3)

cylinkDIUTiming		1.3.6.1.4.1.2.6.2.3.1.3.1.15
The DIU transmit timing selected for NRZ DIUs (Send Timing, or Terminal Timing).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkDIUTimingTT(0), cylinkDIUTimingST(1)

cylinkDialoutCapability		1.3.6.1.4.1.2.6.2.3.1.3.1.16
The DIU dial-out capability selected (polled, tone, or pulse).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkDialoutCapabilityPolled(0), cylinkDialoutCapabilityTone(1), cylinkDialoutCapabilityPulse(2)

cylinkDialoutHoldoff		1.3.6.1.4.1.2.6.2.3.1.3.1.17
The mininum time, in minutes, between successful CSU-to-NMS connections to report alarm conditions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..99

cylinkPrimaryPhone		1.3.6.1.4.1.2.6.2.3.1.3.1.18
The primary telephone number used by by the CSU to contact the NMS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..19)

cylinkSecondaryPhone		1.3.6.1.4.1.2.6.2.3.1.3.1.19
The secondary telephone number used by by the CSU to contact the NMS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..19)

cylinkAlarmRepeatTime		1.3.6.1.4.1.2.6.2.3.1.3.1.20
The interval, in minutes, that the CSU will insert duplicate messages in the alarm queue for persistant alarm conditions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..99

cylinkESThreshold		1.3.6.1.4.1.2.6.2.3.1.3.1.21
The threshold, in seconds, for the errored second value in the current 15-minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..99

cylinkSecondaryContact		1.3.6.1.4.1.2.6.2.3.1.3.1.22
The state of the CSU secondary contact (open or closed).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	cylinkSecondaryContactOpen(0), cylinkSecondaryContactClosed(1)

ibmdot1dBase		1.3.6.1.4.1.2.6.2.15.1
OBJECT IDENTIFIER

ibmdot1dStp		1.3.6.1.4.1.2.6.2.15.2
OBJECT IDENTIFIER

ibmdot1dTp		1.3.6.1.4.1.2.6.2.15.3
OBJECT IDENTIFIER

ibmdot1dStatic		1.3.6.1.4.1.2.6.2.15.4
OBJECT IDENTIFIER

ibmtbMACAddressFilters		1.3.6.1.4.1.2.6.2.15.5
OBJECT IDENTIFIER

ibmtbSAPFilters		1.3.6.1.4.1.2.6.2.15.6
OBJECT IDENTIFIER

ibmtbEthTypeFilters		1.3.6.1.4.1.2.6.2.15.7
OBJECT IDENTIFIER

ibmtbWindowFilters		1.3.6.1.4.1.2.6.2.15.8
OBJECT IDENTIFIER

ibmtbFiltOrderTable		1.3.6.1.4.1.2.6.2.15.9
OBJECT IDENTIFIER

ibmdot1dBaseBridgeAddress		1.3.6.1.4.1.2.6.2.15.1.1
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with ibmdot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdot1dBaseNumPorts		1.3.6.1.4.1.2.6.2.15.1.2
The number of TB ports controlled by this bridging entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dBaseType		1.3.6.1.4.1.2.6.2.15.1.3
Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), transparent-only(2), sourceroute-only(3), srt(4)

ibmdot1dBasePortTable		1.3.6.1.4.1.2.6.2.15.1.4
A table that contains generic information about every port that is associated with this bridge.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmDot1dBasePortEntry

ibmdot1dBasePortEntry		1.3.6.1.4.1.2.6.2.15.1.4.1
A list of information for each port of the bridge.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmDot1dBasePortEntry

ibmdot1dBasePort		1.3.6.1.4.1.2.6.2.15.1.4.1.1
The port number of the port for which this entry contains bridge management information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dBasePortIfIndex		1.3.6.1.4.1.2.6.2.15.1.4.1.2
The value of the instance of the ifIndex object, defined in RFC 1156, RFC 1213 for the interface corresponding to this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dBasePortCircuit		1.3.6.1.4.1.2.6.2.15.1.4.1.3
For a port which potentially has the same value of ibmdot1dBasePortIfIndex as another port on the same bridge, this object contains an identifier unique to this port. For example, in the case where multiple ports correspond one-to-one with multiple Frame Relay circuit's, this value provides the object identifier for the frame relay MIB. Fpr a port which has a unique value of ibmdot1dBasePortIfIndex, this object can have the value {0.0}.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ibmdot1dBasePortDelayExceededDiscards		1.3.6.1.4.1.2.6.2.15.1.4.1.4
The number of frames discarded by this port due to excessive transit delay through the bridge.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdot1dBasePortMtuExceededDiscards		1.3.6.1.4.1.2.6.2.15.1.4.1.5
The number of frames discarded by this port due to an excessive size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdot1dStpProtocolSpecification		1.3.6.1.4.1.2.6.2.15.2.1
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), decLb100(2), ieee8021d(3)

ibmdot1dStpPriority		1.3.6.1.4.1.2.6.2.15.2.2
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of ibmdot1dBaseBridgeAddress.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

ibmdot1dStpTimeSinceTopologyChange		1.3.6.1.4.1.2.6.2.15.2.3
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmdot1dStpTopChanges		1.3.6.1.4.1.2.6.2.15.2.4
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdot1dStpDesignatedRoot		1.3.6.1.4.1.2.6.2.15.2.5
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

ibmdot1dStpRootCost		1.3.6.1.4.1.2.6.2.15.2.6
The cost of the path to the root as seen from this bridge.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dStpRootPort		1.3.6.1.4.1.2.6.2.15.2.7
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dStpMaxAge		1.3.6.1.4.1.2.6.2.15.2.8
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dStpHelloTime		1.3.6.1.4.1.2.6.2.15.2.9
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dStpHoldTime		1.3.6.1.4.1.2.6.2.15.2.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dStpForwardDelay		1.3.6.1.4.1.2.6.2.15.2.11
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in a particular state before moving to the next state. For example, how long a port stays in the Listening state when moving from Blocking to Learning. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. (Note that this value is the one that this bridge is currently using, in contrast to ibmdot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dStpBridgeMaxAge		1.3.6.1.4.1.2.6.2.15.2.12
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range for this parameter is related to the value of ibmdot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1d/D9 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. The IBM 6611 Network Processor obtains this value from the 'Max Age' parameter provided to the configuration program.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmdot1dStpBridgeHelloTime		1.3.6.1.4.1.2.6.2.15.2.13
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1d/D9 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. The IBM 6611 Network Processor obtains this value from the 'Hello Time' parameter provided to the configuration program.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmdot1dStpBridgeForwardDelay		1.3.6.1.4.1.2.6.2.15.2.14
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range for this parameter is related to the value of ibmdot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1d/D9 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. The IBM 6611 Network Processor obtains this value from the 'Forward Delay Time' parameter provided to the configuration program.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmdot1dStpPortTable		1.3.6.1.4.1.2.6.2.15.2.15
A table that contains port-specific information for the Spanning Tree Protocol.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmDot1dStpPortEntry

ibmdot1dStpPortEntry		1.3.6.1.4.1.2.6.2.15.2.15.1
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmDot1dStpPortEntry

ibmdot1dStpPort		1.3.6.1.4.1.2.6.2.15.2.15.1.1
The port number of the port for which this entry contains Spanning Tree Protocol management information. This port number is the same as that reported by ibmdot1dBasePort.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dStpPortPriority		1.3.6.1.4.1.2.6.2.15.2.15.1.2
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of ibmdot1dStpPort.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

ibmdot1dStpPortState		1.3.6.1.4.1.2.6.2.15.2.15.1.3
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see ibmdot1dStpPortEnable), this object will have a value of disabled(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)

ibmdot1dStpPortEnable		1.3.6.1.4.1.2.6.2.15.2.15.1.4
The enabled/disabled status of the port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

ibmdot1dStpPortPathCost		1.3.6.1.4.1.2.6.2.15.2.15.1.5
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. The IBM 6611 Network Processor obtains this value from the 'Path Cost' parameter provided to the configuration program.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

ibmdot1dStpPortDesignatedRoot		1.3.6.1.4.1.2.6.2.15.2.15.1.6
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

ibmdot1dStpPortDesignatedCost		1.3.6.1.4.1.2.6.2.15.2.15.1.7
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dStpPortDesignatedBridge		1.3.6.1.4.1.2.6.2.15.2.15.1.8
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

ibmdot1dStpPortDesignatedPort		1.3.6.1.4.1.2.6.2.15.2.15.1.9
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmdot1dStpPortForwardTransitions		1.3.6.1.4.1.2.6.2.15.2.15.1.10
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdot1dTpLearnedEntryDiscards		1.3.6.1.4.1.2.6.2.15.3.1
The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdot1dTpAgingTime		1.3.6.1.4.1.2.6.2.15.3.2
The timeout period in seconds for aging out dynamically learned forwarding information. The IBM 6611 Network Processor obtains this value from the 'Aging Time' parameter provided to the configuration program.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmdot1dTpFdbTable		1.3.6.1.4.1.2.6.2.15.3.3
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmDot1dTpFdbEntry

ibmdot1dTpFdbEntry		1.3.6.1.4.1.2.6.2.15.3.3.1
Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmDot1dTpFdbEntry

ibmdot1dTpFdbAddress		1.3.6.1.4.1.2.6.2.15.3.3.1.1
A unicast MAC address for which the bridge has forwarding and/or filtering information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdot1dTpFdbPort		1.3.6.1.4.1.2.6.2.15.3.3.1.2
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of ibmdot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the ibmdot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of ibmdot1dTpFdbStatus is not learned(3).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dTpFdbStatus		1.3.6.1.4.1.2.6.2.15.3.3.1.3
The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of ibmdot1dTpFdbPort, nor an entry in the ibmdot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of ibmdot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of ibmdot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of ibmdot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of ibmdot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) : the value of the corresponding instance of ibmdot1dTpFdbAddress is also the value of an existing instance of ibmdot1dStaticAddress.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), invalid(2), learned(3), self(4), mgmt(5)

ibmdot1dTpPortTable		1.3.6.1.4.1.2.6.2.15.3.4
A table that contains information about every port that is associated with this transparent bridge.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmDot1dTpPortEntry

ibmdot1dTpPortEntry		1.3.6.1.4.1.2.6.2.15.3.4.1
A list of information for each port of a transparent bridge.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmDot1dTpPortEntry

ibmdot1dTpPort		1.3.6.1.4.1.2.6.2.15.3.4.1.1
The port number of the port for which this entry contains Transparent bridging management information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dTpPortMaxInfo		1.3.6.1.4.1.2.6.2.15.3.4.1.2
The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdot1dTpPortInFrames		1.3.6.1.4.1.2.6.2.15.3.4.1.3
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdot1dTpPortOutFrames		1.3.6.1.4.1.2.6.2.15.3.4.1.4
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdot1dTpPortInDiscards		1.3.6.1.4.1.2.6.2.15.3.4.1.5
Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmdot1dStaticTable		1.3.6.1.4.1.2.6.2.15.4.1
A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmDot1dStaticEntry

ibmdot1dStaticEntry		1.3.6.1.4.1.2.6.2.15.4.1.1
Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmDot1dStaticEntry

ibmdot1dStaticAddress		1.3.6.1.4.1.2.6.2.15.4.1.1.1
The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdot1dStaticReceivePort		1.3.6.1.4.1.2.6.2.15.4.1.1.2
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmdot1dStaticAllowedToGoTo		1.3.6.1.4.1.2.6.2.15.4.1.1.3
The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.)
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

ibmdot1dStaticStatus		1.3.6.1.4.1.2.6.2.15.4.1.1.4
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5)

ibmtbmacFiltInfoTable		1.3.6.1.4.1.2.6.2.15.5.1
Table of MAC address filtering information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBMacAddrFilterInfoEntry

ibmtbmacFiltInfoEntry		1.3.6.1.4.1.2.6.2.15.5.1.1
MAC address filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBMacAddrFilterInfoEntry

ibmtbmacFiltIfIndex		1.3.6.1.4.1.2.6.2.15.5.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbmacFiltInFilterType		1.3.6.1.4.1.2.6.2.15.5.1.1.2
For the incoming filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmtbmacFiltOutFilterType		1.3.6.1.4.1.2.6.2.15.5.1.1.3
For the outgoing filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmtbmacFiltInNotForwarded		1.3.6.1.4.1.2.6.2.15.5.1.1.4
Number of packets not forwarded, in the incoming direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmtbmacFiltOutNotForwarded		1.3.6.1.4.1.2.6.2.15.5.1.1.5
Number of packets not forwarded, in the outgoing direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmtbmacFiltInTable		1.3.6.1.4.1.2.6.2.15.5.2
Table of MAC address filtering information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBMacAddrFilterInEntry

ibmtbmacFiltInEntry		1.3.6.1.4.1.2.6.2.15.5.2.1
Filtering information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBMacAddrFilterInEntry

ibmtbmacFiltInIfIndex		1.3.6.1.4.1.2.6.2.15.5.2.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbmacFiltInSrcAddress		1.3.6.1.4.1.2.6.2.15.5.2.1.2
MAC source address to be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmtbmacFiltInSrcMask		1.3.6.1.4.1.2.6.2.15.5.2.1.3
Mask to allow ibmtbmacFiltInSrcAddress to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmtbmacFiltInDestAddress		1.3.6.1.4.1.2.6.2.15.5.2.1.4
MAC destination address to be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmtbmacFiltInDestMask		1.3.6.1.4.1.2.6.2.15.5.2.1.5
Mask to allow ibmtbmacFiltInDestAddress to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmtbmacFiltOutTable		1.3.6.1.4.1.2.6.2.15.5.3
Table of MAC address filtering information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBMacAddrFilterOutEntry

ibmtbmacFiltOutEntry		1.3.6.1.4.1.2.6.2.15.5.3.1
Filtering information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBMacAddrFilterOutEntry

ibmtbmacFiltOutIfIndex		1.3.6.1.4.1.2.6.2.15.5.3.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbmacFiltOutSrcAddress		1.3.6.1.4.1.2.6.2.15.5.3.1.2
MAC source address to be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmtbmacFiltOutSrcMask		1.3.6.1.4.1.2.6.2.15.5.3.1.3
Mask to allow ibmtbmacFiltOutSrcAddress to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmtbmacFiltOutDestAddress		1.3.6.1.4.1.2.6.2.15.5.3.1.4
MAC destination address to be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmtbmacFiltOutDestMask		1.3.6.1.4.1.2.6.2.15.5.3.1.5
Mask to allow ibmtbmacFiltOutDestAddress to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmtbsapFiltInfoTable		1.3.6.1.4.1.2.6.2.15.6.1
Table of SAP filtering information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBSapFilterInfoEntry

ibmtbsapFiltInfoEntry		1.3.6.1.4.1.2.6.2.15.6.1.1
SAP filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBSapFilterInfoEntry

ibmtbsapFiltIfIndex		1.3.6.1.4.1.2.6.2.15.6.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbsapFiltIn		1.3.6.1.4.1.2.6.2.15.6.1.1.2
A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an incoming frame with that SAP is to be forwarded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(16)

ibmtbsapFiltOut		1.3.6.1.4.1.2.6.2.15.6.1.1.3
A bitmap of all possible source SAPs (even) that will be on or off depending on whether or not an outgoing frame with that SAP is to be forwarded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(16)

ibmtbsapFiltInNotForwarded		1.3.6.1.4.1.2.6.2.15.6.1.1.4
Number of packets not forwarded, in the incoming direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmtbsapFiltOutNotForwarded		1.3.6.1.4.1.2.6.2.15.6.1.1.5
Number of packets not forwarded, in the outgoing direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmtbEthTypeFiltInfoTable		1.3.6.1.4.1.2.6.2.15.7.1
Table of Ethernet type filtering information. Note that this filtering only applies to: 1) The Ethernet TYPE field for DIX version 2 frames. 2) The Ethernet TYPE field contained in the SNAP header of 802.3 frames, if the frame contains a SNAP header (SSAP = DSAP = 0xAA)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBEthTypeFilterInfoEntry

ibmtbEthTypeFiltInfoEntry		1.3.6.1.4.1.2.6.2.15.7.1.1
Ethernet type filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBEthTypeFilterInfoEntry

ibmtbEthTypeFiltIfIndex		1.3.6.1.4.1.2.6.2.15.7.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbEthTypeFiltInFilterType		1.3.6.1.4.1.2.6.2.15.7.1.1.2
For the incoming Ethernet type filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmtbEthTypeFiltOutFilterType		1.3.6.1.4.1.2.6.2.15.7.1.1.3
For the outgoing Ethernet type filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmtbEthTypeFiltInNotForwarded		1.3.6.1.4.1.2.6.2.15.7.1.1.4
Number of packets not forwarded, in the incoming direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmtbEthTypeFiltOutNotForwarded		1.3.6.1.4.1.2.6.2.15.7.1.1.5
Number of packets not forwarded, in the outgoing direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmtbEthTypeFiltInTable		1.3.6.1.4.1.2.6.2.15.7.2
Table of Ethernet type filtering information for incoming frames. Note that this filtering only applies to: 1) The Ethernet TYPE field for DIX version 2 frames. 2) The Ethernet TYPE field contained in the SNAP header of 802.3 frames, if the frame contains a SNAP header (SSAP = DSAP = 0xAA)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBEthTypeFilterInEntry

ibmtbEthTypeFiltInEntry		1.3.6.1.4.1.2.6.2.15.7.2.1
Filtering information for a single Ethernet type on a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBEthTypeFilterInEntry

ibmtbEthTypeFiltInIfIndex		1.3.6.1.4.1.2.6.2.15.7.2.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbEthTypeFiltInValue		1.3.6.1.4.1.2.6.2.15.7.2.1.2
Indicates which Ethernet type to filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmtbEthTypeFiltInMask		1.3.6.1.4.1.2.6.2.15.7.2.1.3
Mask to allow ibmtbEthTypeFiltInValue to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmtbEthTypeFiltOutTable		1.3.6.1.4.1.2.6.2.15.7.3
Table of Ethernet type filtering information for outgoing frames. Note that this filtering only applies to: 1) The Ethernet TYPE field for DIX version 2 frames. 2) The Ethernet TYPE field contained in the SNAP header of 802.3 frames, if the frame contains a SNAP header (SSAP = DSAP = 0xAA)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBEthTypeFilterOutEntry

ibmtbEthTypeFiltOutEntry		1.3.6.1.4.1.2.6.2.15.7.3.1
Filtering information for a single Ethernet type on a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBEthTypeFilterOutEntry

ibmtbEthTypeFiltOutIfIndex		1.3.6.1.4.1.2.6.2.15.7.3.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbEthTypeFiltOutValue		1.3.6.1.4.1.2.6.2.15.7.3.1.2
Indicates which Ethernet type to filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmtbEthTypeFiltOutMask		1.3.6.1.4.1.2.6.2.15.7.3.1.3
Mask to allow ibmtbEthTypeFiltOutValue to be used as a range of values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmtbwinFiltInfoTable		1.3.6.1.4.1.2.6.2.15.8.1
Table of Window filtering information.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBWindowFilterInfoEntry

ibmtbwinFiltInfoEntry		1.3.6.1.4.1.2.6.2.15.8.1.1
Window filtering information for a single interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBWindowFilterInfoEntry

ibmtbwinFiltIfIndex		1.3.6.1.4.1.2.6.2.15.8.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbwinFiltInFilterType		1.3.6.1.4.1.2.6.2.15.8.1.1.2
For the incoming filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmtbwinFiltOutFilterType		1.3.6.1.4.1.2.6.2.15.8.1.1.3
For the outgoing filter table, determines whether the entries are permit or deny entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

ibmtbwinFiltInNotForwarded		1.3.6.1.4.1.2.6.2.15.8.1.1.4
Number of packets not forwarded, in the incoming direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmtbwinFiltOutNotForwarded		1.3.6.1.4.1.2.6.2.15.8.1.1.5
Number of packets not forwarded, in the outgoing direction, because they were filtered out.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmtbwinFiltInTable		1.3.6.1.4.1.2.6.2.15.8.2
Table of Window filtering information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBWindowFilterInEntry

ibmtbwinFiltInEntry		1.3.6.1.4.1.2.6.2.15.8.2.1
Filtering information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBWindowFilterInEntry

ibmtbwinFiltInIfIndex		1.3.6.1.4.1.2.6.2.15.8.2.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbwinFiltInContents		1.3.6.1.4.1.2.6.2.15.8.2.1.2
String of bytes that will be compared with bytes in the frame.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmtbwinFiltInMaskString		1.3.6.1.4.1.2.6.2.15.8.2.1.3
String of bytes that will be masked with bytes in the contents field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmtbwinFiltInOffsetStart		1.3.6.1.4.1.2.6.2.15.8.2.1.4
Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address field, whereas, a value of 'DATA' means it is applied at the beginning of the data field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmtbwinFiltInNumBytes		1.3.6.1.4.1.2.6.2.15.8.2.1.5
Number of bytes in the contents field that are used for filtering
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmtbwinFiltInOffset		1.3.6.1.4.1.2.6.2.15.8.2.1.6
Number of bytes offset into the frame from the offset start point to begin the compare.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmtbwinFiltInId		1.3.6.1.4.1.2.6.2.15.8.2.1.7
A unique identifier associated with this window filter entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbwinFiltOutTable		1.3.6.1.4.1.2.6.2.15.8.3
Table of Window filtering information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBWindowFilterOutEntry

ibmtbwinFiltOutEntry		1.3.6.1.4.1.2.6.2.15.8.3.1
Filtering information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBWindowFilterOutEntry

ibmtbwinFiltOutIfIndex		1.3.6.1.4.1.2.6.2.15.8.3.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbwinFiltOutContents		1.3.6.1.4.1.2.6.2.15.8.3.1.2
String of bytes that will be compared with bytes in the frame.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmtbwinFiltOutMaskString		1.3.6.1.4.1.2.6.2.15.8.3.1.3
String of bytes that will be masked with bytes in the contents field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmtbwinFiltOutOffsetStart		1.3.6.1.4.1.2.6.2.15.8.3.1.4
Determines the starting point where the contents field should be applied. A value of 'MAC' means the base is at the beginning of the destination MAC address field, whereas, a value of 'DATA' means it is applied at the beginning of the data field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmtbwinFiltOutNumBytes		1.3.6.1.4.1.2.6.2.15.8.3.1.5
Number of bytes in the contents field that are used for filtering
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmtbwinFiltOutOffset		1.3.6.1.4.1.2.6.2.15.8.3.1.6
Number of bytes offset into the frame from the offset start point to begin the compare.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmtbwinFiltOutId		1.3.6.1.4.1.2.6.2.15.8.3.1.7
A unique identifier associated with this window filter entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbFiltOrderInTable		1.3.6.1.4.1.2.6.2.15.9.1
Table of information describing which order the filters are applied for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBFiltOrderInEntry

ibmtbFiltOrderInEntry		1.3.6.1.4.1.2.6.2.15.9.1.1
Filter order information for incoming frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBFiltOrderInEntry

ibmtbFiltOrderInIfIndex		1.3.6.1.4.1.2.6.2.15.9.1.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbFiltOrderInPriority		1.3.6.1.4.1.2.6.2.15.9.1.1.2
The priority of when a filter is applied to an incoming frame. A value of 1 signifies that it is applied first.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbFiltOrderInName		1.3.6.1.4.1.2.6.2.15.9.1.1.3
The name of the filter applied to incoming frames that is associated with the priority, ibmtbFiltOrderInPriority.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmtbFiltOrderOutTable		1.3.6.1.4.1.2.6.2.15.9.2
Table of information describing which order the filters are applied for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TBFiltOrderOutEntry

ibmtbFiltOrderOutEntry		1.3.6.1.4.1.2.6.2.15.9.2.1
Filter order information for outgoing frames.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TBFiltOrderOutEntry

ibmtbFiltOrderOutIfIndex		1.3.6.1.4.1.2.6.2.15.9.2.1.1
The value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbFiltOrderOutPriority		1.3.6.1.4.1.2.6.2.15.9.2.1.2
The priority of when a filter is applied to an outgoing frame. A value of 1 signifies that it is applied first.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmtbFiltOrderOutName		1.3.6.1.4.1.2.6.2.15.9.2.1.3
The name of the filter applied to outgoing frames that is associated with the priority, ibmtbFiltOrderOutPriority.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmSelectNet		1.3.6.1.4.1.2.6.2.16.1
OBJECT IDENTIFIER

ibmnbpFilter		1.3.6.1.4.1.2.6.2.16.2
OBJECT IDENTIFIER

ibmatportFilter		1.3.6.1.4.1.2.6.2.16.3
OBJECT IDENTIFIER

ibmSelectNetFilter		1.3.6.1.4.1.2.6.2.16.4
OBJECT IDENTIFIER

ibmSelectNetTable		1.3.6.1.4.1.2.6.2.16.1.1
The list of selected network definition entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SelectNetEntry

ibmSelectNetEntry		1.3.6.1.4.1.2.6.2.16.1.1.1
The description of a selected network definition.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SelectNetEntry

ibmSelectNetIndex		1.3.6.1.4.1.2.6.2.16.1.1.1.1
An identifier that is unique to the default zone name that is present in this entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmSelectNetZone		1.3.6.1.4.1.2.6.2.16.1.1.1.2
The ASCII default zone name of this entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmSelectNetNetStart		1.3.6.1.4.1.2.6.2.16.1.1.1.3
The network address that starts the range for this entry. This address is a two octet DDP network address in network byte order.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmSelectNetNetEnd		1.3.6.1.4.1.2.6.2.16.1.1.1.4
The network address that ends the range for this entry. This address is a two octet DDP network address in network byte order.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmSelectNetInterfaceNetStart		1.3.6.1.4.1.2.6.2.16.1.1.1.5
The network address that starts the range for the interface associated with this definition.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmnbpFilterPacketsFiltered		1.3.6.1.4.1.2.6.2.16.2.1
The number of packets filtered by nbp filters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmnbpFilterPacketsSent		1.3.6.1.4.1.2.6.2.16.2.2
The number of packets not filtered by nbp filters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmatportFilterTable		1.3.6.1.4.1.2.6.2.16.3.1
The list of Appletalk port destination network filter entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtportFilterEntry

ibmatportFilterEntry		1.3.6.1.4.1.2.6.2.16.3.1.1
The description of a filter on this Appletalk port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtportFilterEntry

ibmatportFilterIndex		1.3.6.1.4.1.2.6.2.16.3.1.1.1
An identifier that is unique to the Appletalk port to which this filter applies. The port identified by this value is the same port as identified by atportIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmatportFilterNetStart		1.3.6.1.4.1.2.6.2.16.3.1.1.2
The network address that starts the range for this destination network filter. This address is a two octet DDP network address in network byte order.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmatportFilterNetEnd		1.3.6.1.4.1.2.6.2.16.3.1.1.3
The network address that ends the range for this destination network filter. This address is a two octet DDP network address in network byte order.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmSelectNetFilterTable		1.3.6.1.4.1.2.6.2.16.4.1
The list of selected network destination network filter entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SelectNetFilterEntry

ibmSelectNetFilterEntry		1.3.6.1.4.1.2.6.2.16.4.1.1
The description of a filter for this selected network definition.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SelectNetFilterEntry

ibmSelectNetFilterIndex		1.3.6.1.4.1.2.6.2.16.4.1.1.1
An identifier that is unique to the selected network definition to which this filter applies. This value is the same as that provided by ibmSelectNetIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmSelectNetFilterNetStart		1.3.6.1.4.1.2.6.2.16.4.1.1.2
The network address that starts the range for this destination network filter. This address is a two octet DDP network address in network byte order.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmSelectNetFilterNetEnd		1.3.6.1.4.1.2.6.2.16.4.1.1.3
The network address that ends the range for this destination network filter. This address is a two octet DDP network address in network byte order.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

ibmdecAllRoutersFuncAddr		1.3.6.1.4.1.2.6.2.17.1
The functional address used in communicating with with all DECnet Phase IV and DECnet Phase IV-Prime routers on a token ring LAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdecAllEndNodesFuncAddr		1.3.6.1.4.1.2.6.2.17.2
The functional address used in communicating with with all DECnet Phase IV and DECnet Phase IV-Prime end nodes on a token ring LAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmdecSplitHorPoisonRev		1.3.6.1.4.1.2.6.2.17.3
Defines whether the Split Horizon with Poison Reverse option is enabled or not
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

ibmdecNodeType		1.3.6.1.4.1.2.6.2.17.4
This parameter indicates the node type of the router. This object is the same as the phivRouteType object defined by RFC 1289, however, this definition extends the enumerations to provide new values.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	routing-III(1), nonrouting-III(2), area(3), routing-IV(4), nonrouting-IV(5), area-IV-Prime(6), routing-IV-Prime(7), nonrouting-IV-Prime(8)

ibmdecLANCircuitTable		1.3.6.1.4.1.2.6.2.17.5
The list of information relevant to LAN circuits. This table extends the information provided by the phivCircuitParametersTable defined by RFC 1289.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmdecLANCircuitEntry

ibmdecLANCircuitEntry		1.3.6.1.4.1.2.6.2.17.5.1
Table entry with information relevant to LAN circuits.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmdecLANCircuitEntry

ibmdecLANCircuitIndex		1.3.6.1.4.1.2.6.2.17.5.1.1
A unique index value for each known circuit on a LAN interface. The value of this variable is the same as that provided by phivCircuitIndex.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmdecLANCircuitType		1.3.6.1.4.1.2.6.2.17.5.1.2
If the CircuitType is Bilingual for a circuit, the router would use a Phase_IV compliant locally administered MAC address for that circuit and would be configured to communicate with Phase_IV and Phase_IV-Prime nodes over that circuit. A bilingual router can help communication between the Phase_IV and the Phase_IV-Prime nodes over the same extended LAN segment, and prevents a partitioned network. If the CircuitType is AMA ( Arbitrary MAC Address ) for a circuit, the router would use an arbitrary MAC address for that circuit, and would be configured to communicate with Phase_IV-Prime nodes over that circuit. If the CircuitType is PhaseIV for a circuit, the router would use the Phase_IV compliant locally administered MAC address for that circuit, and would be configured to communicate with Phase_IV nodes over that circuit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	bilingual(1), ama(2), phaseIV(3)

ibmdecLANCircuitSourceRoute		1.3.6.1.4.1.2.6.2.17.5.1.3
This parameter indicates if source routing is enabled on a token-ring circuit. A value of 3 is returned for circuits which are not of the 802.5/token-ring type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2), notapplicable(3)

ibmdecLANCircuitAddrType		1.3.6.1.4.1.2.6.2.17.5.1.4
This parameter indicates the type of MAC address used on this circuit. The value returned is decnet(1), if a DECnet Phase_IV compliant locally administered MAC address is being used. The value returned is hardware(2), if the unique assigned ROM address is used. The value returned is user(3), if a non DECnet Phase_IV compliant locally administered MAC address is being used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	decnet(1), hardware(2), user(3)

ibmipext		1.3.6.1.4.1.2.6.2.19.1
OBJECT IDENTIFIER

ibmptyqueue		1.3.6.1.4.1.2.6.2.19.2
OBJECT IDENTIFIER

ibmTG		1.3.6.1.4.1.2.6.2.19.3
OBJECT IDENTIFIER

ibmipPtyQueueEnableTable		1.3.6.1.4.1.2.6.2.19.1.1
This table defines which interfaces are enabled for IP prioritization. It also defines the default serial transmission priority queue to be used for IP packets which are not assigned to use a specific transmission queue.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmipPtyQueueEnableEntry

ibmipPtyQueueEnableEntry		1.3.6.1.4.1.2.6.2.19.1.1.1
Each entry defines whether IP prioritization is enabled on a particular interface and the default transmission queue.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmipPtyQueueEnableEntry

ibmipPtyQueueEnableIfIndex		1.3.6.1.4.1.2.6.2.19.1.1.1.1
Defines the interface associated with IP prioritization. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmipPtyQueueEnable		1.3.6.1.4.1.2.6.2.19.1.1.1.2
The value of this object identifies if IP prioritization is enabled on this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ibmipPtyQueueDefault		1.3.6.1.4.1.2.6.2.19.1.1.1.3
Identifies the transmission queue to be used for IP packets which are not assigned to use a specific transmission queue.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	high(1), medium(2), low(3)

ibmipPtyQueueTable		1.3.6.1.4.1.2.6.2.19.1.2
This table contains the assignments of UDP/TCP port numbers to specific transmission queues for a given serial interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmipPtyQueueEntry

ibmipPtyQueueEntry		1.3.6.1.4.1.2.6.2.19.1.2.1
Each entry defines the UDP/TCP port number and its associated transmission priority queue for a given interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmipPtyQueueEntry

ibmipPtyQueueIfIndex		1.3.6.1.4.1.2.6.2.19.1.2.1.1
Defines the interface on which a UDP/TCP port is associated with a specific transmission priority queue. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmipPtyQueuePort		1.3.6.1.4.1.2.6.2.19.1.2.1.2
Identifies a UDP or TCP port number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmipPtyQueueType		1.3.6.1.4.1.2.6.2.19.1.2.1.3
Indicates the port type of the port number defined by ibmipPtyQueuePort.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	tcp(1), udp(2)

ibmipPtyQueueNumber		1.3.6.1.4.1.2.6.2.19.1.2.1.4
Indicates which transmission queue will be used to transmit a packet which has a port number as specified by ibmipPtyQueuePort.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	high(1), medium(2), low(3)

ibmipFilterTable		1.3.6.1.4.1.2.6.2.19.1.3
Table of IP address/mask filter definitions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmipFilterEntry

ibmipFilterEntry		1.3.6.1.4.1.2.6.2.19.1.3.1
An entry in the IP address/mask filter table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmipFilterEntry

ibmipFilterIfIndex		1.3.6.1.4.1.2.6.2.19.1.3.1.1
Defines the interface associated with this address/mask filter definition. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmipFilterId		1.3.6.1.4.1.2.6.2.19.1.3.1.2
An id that defines this filter entry. This number is unique within this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..50

ibmipFilterScope		1.3.6.1.4.1.2.6.2.19.1.3.1.3
Defines whether this filter is applied to all interfaces or just this one.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	system(1), interface(2)

ibmipFilterType		1.3.6.1.4.1.2.6.2.19.1.3.1.4
Defines the type of filtering.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	singular(1), dual(2)

ibmipPermitDeny		1.3.6.1.4.1.2.6.2.19.1.3.1.5
Identifies whether traffic for a specified filter ID is to be permitted to pass through the IBM 6611 or whether it is to be discarded.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

ibmipFilterAddr1		1.3.6.1.4.1.2.6.2.19.1.3.1.6
A valid IP address of the host, subnet or network for this filter. For singular filters, this is the only end point, however, for dual filters this is the source end point.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ibmipFilterMask1		1.3.6.1.4.1.2.6.2.19.1.3.1.7
A valid IP address mask used for this filter. In conjunction with the IP address defined by ibmipFilterAddr1, it defines the range of IP addresses to be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ibmipFilterAddr2		1.3.6.1.4.1.2.6.2.19.1.3.1.8
Defines the destination IP address if ibmipFilterType is dual. This value is undefined for singular filters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ibmipFilterMask2		1.3.6.1.4.1.2.6.2.19.1.3.1.9
A valid IP address mask used for this filter. In conjunction with the IP address defined by ibmipFilterAddr2, it defines the range of IP addresses to be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ibmipFilterExtTable		1.3.6.1.4.1.2.6.2.19.1.4
Table of IP port number filter definitions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmipFilterExtEntry

ibmipFilterExtEntry		1.3.6.1.4.1.2.6.2.19.1.4.1
An entry in the IP port number filter table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmipFilterExtEntry

ibmipFilterExtIfIndex		1.3.6.1.4.1.2.6.2.19.1.4.1.1
Defines the interface associated with this IP port number filter definition. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmipFilterExtFilterId		1.3.6.1.4.1.2.6.2.19.1.4.1.2
An id that defines this filter entry. This number is unique within this interface and is the same filter ID as defined by ibmipFilterId.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..50

ibmipFilterExtValue		1.3.6.1.4.1.2.6.2.19.1.4.1.3
Defines a TCP or UDP port number that will be filtered using this filter specification.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmipFilterExtProtocol		1.3.6.1.4.1.2.6.2.19.1.4.1.4
Specifies the protocol associated with the value defined by ibmipFilterExtValue for this filter specification.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), tcpudp(1)

ibmPtyQueueingTable		1.3.6.1.4.1.2.6.2.19.2.1
This table provides information on a specific transmission queue of a serial interface. Information includes: - Link Bandwidth Allocation (LBA): Identifies the number of packets transmitted from a particular queue before a lower priority transmission queue will be serviced. - Queue Bandwidth Reservation (QBR): Identifies the percentage of buffer space on a serial adapter that is allotted to a particular queue for transmission of packets.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmPtyQueueingEntry

ibmPtyQueueingEntry		1.3.6.1.4.1.2.6.2.19.2.1.1
Each entry defines the Link Bandwidth Allocation (LBA) and Queue Bandwidth Reservation (QBR) definitions for a specific transmission queue on a serial interface. Additionally, a counter is provided indicating the number of packets discarded on this queue due to a queue overflow.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmPtyQueueingEntry

ibmPtyQueueingIfIndex		1.3.6.1.4.1.2.6.2.19.2.1.1.1
Defines the interface associated with this priority queue information. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmPtyQueueingQnum		1.3.6.1.4.1.2.6.2.19.2.1.1.2
Identifies the priority queue associated with this interface and its priority queue information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	high(1), medium(2), low(3)

ibmPtyQueueingLBA		1.3.6.1.4.1.2.6.2.19.2.1.1.3
Link Bandwidth Allocation (LBA): Identifies the number of packets that will be transmitted from this queue before a lower priority queue will be serviced.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..10

ibmPtyQueueingQBR		1.3.6.1.4.1.2.6.2.19.2.1.1.4
Queue Bandwidth Reservation (QBR): Identifies the percentage of buffer space on a serial adapter that is allotted to a particular queue for transmission of packets. The sum of all QBR values on an interface must add up to 100%.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmPtyQueueingDiscards		1.3.6.1.4.1.2.6.2.19.2.1.1.5
Identifies the number of packets discarded from this queue due to a queue overflow.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmTGTable		1.3.6.1.4.1.2.6.2.19.3.1
This table provides information about serial point-to-point links which are participating in the 2 T1 in a transmission group (TG) function.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmTGEntry

ibmTGEntry		1.3.6.1.4.1.2.6.2.19.3.1.1
Each entry identifies an interface participating in the 2 T1 in a TG function, along with its associated TG name and which protocol is using the function.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmTGEntry

ibmTGProtocol		1.3.6.1.4.1.2.6.2.19.3.1.1.1
Defines the protocol that is supported for this particular interface and TG name. Currently, only the IP protocol is supported
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ip(2048)

ibmTGIfIndex		1.3.6.1.4.1.2.6.2.19.3.1.1.2
Defines the interface associated with this particular TG name and protocol. This interface is the same interface as defined by the ifIndex variable of the MIB-II interfaces group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmTGEnable		1.3.6.1.4.1.2.6.2.19.3.1.1.3
Defines whether the 2 T1 in a TG function is enabled on this interface
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ibmTGGroupName		1.3.6.1.4.1.2.6.2.19.3.1.1.4
Defines the common TG name assigned to all interfaces in this group. All interfaces with the same TG name will belong to the same group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmTGSwitchOuts		1.3.6.1.4.1.2.6.2.19.3.1.1.5
Counts the number of times a packet had to be switched to another interface in the transmission group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvSysConfig		1.3.6.1.4.1.2.6.2.18.1
OBJECT IDENTIFIER

ibmvIP		1.3.6.1.4.1.2.6.2.18.2
OBJECT IDENTIFIER

ibmvNeighbor		1.3.6.1.4.1.2.6.2.18.3
OBJECT IDENTIFIER

ibmvRouting		1.3.6.1.4.1.2.6.2.18.4
OBJECT IDENTIFIER

ibmvICP		1.3.6.1.4.1.2.6.2.18.5
OBJECT IDENTIFIER

ibmvFRP		1.3.6.1.4.1.2.6.2.18.6
OBJECT IDENTIFIER

ibmvInterface		1.3.6.1.4.1.2.6.2.18.7
OBJECT IDENTIFIER

ibmvSysRtr		1.3.6.1.4.1.2.6.2.18.1.1
Indicates whether this node is acting as a VINES router.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ibmvRouterName		1.3.6.1.4.1.2.6.2.18.1.2
The name of the router node, up to 15 characters long.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmvRouterNetid		1.3.6.1.4.1.2.6.2.18.1.3
The VINES network ID of the router node equal to the router node's serial number. This id may be up to 4 bytes in length.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvipTotalIn		1.3.6.1.4.1.2.6.2.18.2.1
The total number of VINES IP packets that the router node has received since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipTotalOut		1.3.6.1.4.1.2.6.2.18.2.2
The total number of VINES IP packets that the router node has sent since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipRouted		1.3.6.1.4.1.2.6.2.18.2.3
The total number of packets that were routed to another node since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipBcast		1.3.6.1.4.1.2.6.2.18.2.4
The number of VINES IP broadcast packets sent, both generated from the router node and routed from other nodes, since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipInReceives		1.3.6.1.4.1.2.6.2.18.2.5
The number of unicast VINES IP packets received since the last reboot. A unicast packet is destined for this particular router node. It is not being forwarded, multicasted or broadcasted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipBcastInReceives		1.3.6.1.4.1.2.6.2.18.2.6
The number of VINES IP broadcast packets received since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipBad		1.3.6.1.4.1.2.6.2.18.2.7
The total number of badly formed packets that the router node has received since the last booted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipBadHeaders		1.3.6.1.4.1.2.6.2.18.2.8
The number of incoming VINES IP packets received since the last reboot which contained a header error; excluding the following errors: length, checksum and time to live.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipTooSmalls		1.3.6.1.4.1.2.6.2.18.2.9
The number of VINES IP packets received since the last reboot with len < the size of a VINES IP header.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipBadLens		1.3.6.1.4.1.2.6.2.18.2.10
The number of VINES IP packets received since the last reboot whose packet size is not equal to the number of bytes specified in the VINES IP header field.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipBadSums		1.3.6.1.4.1.2.6.2.18.2.11
The number of VINES IP packets received since the last reboot with a bad checksum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipInDiscards		1.3.6.1.4.1.2.6.2.18.2.12
The number of incoming VINES IP packets discarded since the last reboot due to lack of resources.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipZeroHops		1.3.6.1.4.1.2.6.2.18.2.13
The number of VINES IP packets discarded since the last reboot because the hop count equals zero and the current node is not the destination.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvipOutNoRoutes		1.3.6.1.4.1.2.6.2.18.2.14
The number of outgoing VINES IP packets discarded since the last reboot because no route is available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvARP		1.3.6.1.4.1.2.6.2.18.3.1
OBJECT IDENTIFIER

ibmvarpQueryReqs		1.3.6.1.4.1.2.6.2.18.3.1.1
The number of query requests received from clients since the last reboot. When a client is first booted up, it sends out a broadcast query request packet on its LAN segment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvarpServiceResps		1.3.6.1.4.1.2.6.2.18.3.1.2
The number of ARP query responses sent out from this router node since the last reboot. Each router node on the same LAN segment that is providing address assignments will respond.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvarpAssignReqs		1.3.6.1.4.1.2.6.2.18.3.1.3
The number of ARP assignment request received from clients since the last reboot. The client issues an assignment request packet to the router node that responded first to the query request.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvarpAssignResps		1.3.6.1.4.1.2.6.2.18.3.1.4
The number of ARP assignment responses sent to clients since the last reboot. The router node issues a VINES internet address for the client and sends it back in an assignment response packet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvarpHeaderError		1.3.6.1.4.1.2.6.2.18.3.1.5
The number of ARP packets received since the last reboot with a header error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvNbrNumber		1.3.6.1.4.1.2.6.2.18.3.2
The number of entries in the neighbor table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvNbrTable		1.3.6.1.4.1.2.6.2.18.3.3
A list of information about IBM's VINES router neighbor table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmvNbrEntry

ibmvNbrEntry		1.3.6.1.4.1.2.6.2.18.3.3.1
The information for each entry in the neighbor table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmvNbrEntry

ibmvNbrNetid		1.3.6.1.4.1.2.6.2.18.3.3.1.1
The network ID of the neighbor. The VINES internet address has the following form: 'nnnnnnnn.ssss'hex, where n = network ID and s = subnetwork ID. If the neighbor is a router, then network ID is the router node's (the neighbor's) serial number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvNbrSubNetid		1.3.6.1.4.1.2.6.2.18.3.3.1.2
The subnetwork ID of the neighbor. The VINES internet address has the following form: 'nnnnnnnn.ssss'hex, where n = network ID and s = subnetwork ID. If the neighbor is a router node, then the subnetwork ID for the router node (the neighbor) is 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvNbrType		1.3.6.1.4.1.2.6.2.18.3.3.1.3
The type of the neighbor (workstation = pc).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	server(1), workstation(2)

ibmvNbrIfType		1.3.6.1.4.1.2.6.2.18.3.3.1.4
The type of interface that the server uses to reach the neighbor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10Mbit(12), proteon-80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), cept(19), basicISDN(20), primaryISDN(21), propPointToPointSerial(22), ppp(23), loopback(24), eon(25), ethernet-3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frame-relay(32)

ibmvNbrRemAddress		1.3.6.1.4.1.2.6.2.18.3.3.1.5
The address of the neighbor's physical interface. For LAN's, it is the hardware address of the neighbor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvNbrLocAddress		1.3.6.1.4.1.2.6.2.18.3.3.1.6
The address of the router node's physical interface, such as a LAN address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvNbrLocSlot		1.3.6.1.4.1.2.6.2.18.3.3.1.7
The slot number of the interface card that the router node uses to reach the neighbor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7

ibmvNbrLocPort		1.3.6.1.4.1.2.6.2.18.3.3.1.8
The port number on the interface card that the router node used to reach the neighbor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..3

ibmvNbrAging		1.3.6.1.4.1.2.6.2.18.3.3.1.9
The amount of time left before a neighbor entry will be removed because of aging. For a WAN link, which is defined to be permanent, this object is not applicable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvNbrFlags		1.3.6.1.4.1.2.6.2.18.3.3.1.10
Only applicable to a WAN link; states if the link is permanent or non-permanent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	permanent(1), nonpermanent(2)

ibmvNbrRIF		1.3.6.1.4.1.2.6.2.18.3.3.1.11
LAN - MAC address and if applicable, source routing information. Frame Relay - n/a PPP - n/a
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvNbrIfIndex		1.3.6.1.4.1.2.6.2.18.3.3.1.12
The interface (using the MIB II standard) used to reach the neighbor. This number corresponds to the IfIndex object found in MIB II.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvNbrMetric		1.3.6.1.4.1.2.6.2.18.3.3.1.13
The cost to reach the neighbor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtConfig		1.3.6.1.4.1.2.6.2.18.4.1
OBJECT IDENTIFIER

ibmvRtCfgMax		1.3.6.1.4.1.2.6.2.18.4.1.1
The maximum number of entries allowed in the routing table. This value is not defined by administrator.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtCfgInFlt		1.3.6.1.4.1.2.6.2.18.4.1.2
Enables or disables all inbound RTP filters defined. If no inbound RTP filters are defined, then this object has no effect. If a filter is defined, then the default value is 'enabled'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ibmvRtCfgInFltNum		1.3.6.1.4.1.2.6.2.18.4.1.3
The number of inbound RTP filters currently defined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtCfgInFltTable		1.3.6.1.4.1.2.6.2.18.4.1.4
A list of information about the inbound RTP filters which are specified for this router node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmvRtCfgInFltEntry

ibmvRtCfgInFltEntry		1.3.6.1.4.1.2.6.2.18.4.1.4.1
The information for each entry in the inbound RTP filter table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmvRtCfgInFltEntry

ibmvRtCfgInFltNetID		1.3.6.1.4.1.2.6.2.18.4.1.4.1.1
Administrator defined object which specifies the VINES network number to be filtered on the port. The range of the network number is 00000000 - FFFFFFFE. If the network number, 0xFFFFFFFF, is defined, then all network numbers will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvRtCfgInFltIfIndex		1.3.6.1.4.1.2.6.2.18.4.1.4.1.2
The interface (using the MIB II standard) for which the inbound RTP filters were defined. This number corresponds to the IfIndex object found in MIB II.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtCfgInFltMode		1.3.6.1.4.1.2.6.2.18.4.1.4.1.3
The filtering action for the inbound RTP filter. The inbound RTP filters operate on network numbers contained in the topological entries in the RTP update, response, and redirect packets received over a specified interface. In deny mode, the 6611 ignores route information for a network if the network number and the port on which the route information was received matches any inbound RTP filter. In permit mode, the IBM 6611 processes route information for a network only if the network number and the port on which the route information was received matches any inbound RTP filter. The default for this object is 'deny'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

ibmvRtCfgInFltUses		1.3.6.1.4.1.2.6.2.18.4.1.4.1.4
The number of times the defined filter was used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvRtCfgOutFlt		1.3.6.1.4.1.2.6.2.18.4.1.5
Enables or disables all outbound RTP filters defined. If no outbound RTP filters are defined, then this object has no effect. If a filter is defined, then the default value is 'enabled'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ibmvRtCfgOutFltNum		1.3.6.1.4.1.2.6.2.18.4.1.6
The number of outbound RTP filters currently defined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtCfgOutFltTable		1.3.6.1.4.1.2.6.2.18.4.1.7
A list of information about the outbound RTP filters which are specified for this router node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmvRtCfgOutFltEntry

ibmvRtCfgOutFltEntry		1.3.6.1.4.1.2.6.2.18.4.1.7.1
The information for each entry in the outbound RTP filter table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmvRtCfgOutFltEntry

ibmvRtCfgOutFltNetID		1.3.6.1.4.1.2.6.2.18.4.1.7.1.1
Administrator defined object which specifies the VINES network number to be filtered on the port. The range of the network number is 00000000 - FFFFFFFE. If the network number, 0xFFFFFFFF, is defined, then all network numbers will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvRtCfgOutFltIfIndex		1.3.6.1.4.1.2.6.2.18.4.1.7.1.2
The interface (using the MIB II standard) for which the outbound RTP filters were defined. This number corresponds to the IfIndex object found in MIB II.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtCfgOutFltMode		1.3.6.1.4.1.2.6.2.18.4.1.7.1.3
The filtering action for the outbound RTP filter. The outbound RTP filters operate on the network numbers contained in the topological entries in RTP update and response packets transmitted over a specified interface. In deny mode, filters operate on interface names and network numbers (that is, the network numbers contained in the topological entries in the RTP packets). In deny mode, the IBM 6611 does not advertise route information for a network if the network number and the interface on which the route information is to be transmitted matches any outbound RTP filter. In permit mode, the 6611 advertises route information for a network only if the network number and the interface on which the route information is to be transmitted matches any outbound RTP filter. The default for this object is 'Deny'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

ibmvRtCfgOutFltUses		1.3.6.1.4.1.2.6.2.18.4.1.7.1.4
The number of times the defined filter was used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvRtCfgFlt		1.3.6.1.4.1.2.6.2.18.4.1.8
Enables or disables all RTP router filters defined. If no RTP router filters are defined, then this object has no effect. If a filter is defined, then the default value is 'enabled'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ibmvRtCfgFltNum		1.3.6.1.4.1.2.6.2.18.4.1.9
The number of RTP router filters currently defined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtCfgFltTable		1.3.6.1.4.1.2.6.2.18.4.1.10
A list of information about the RTP router filters which are specified for this router node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmvRtCfgFltEntry

ibmvRtCfgFltEntry		1.3.6.1.4.1.2.6.2.18.4.1.10.1
The information for each entry in the RTP router filter table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmvRtCfgFltEntry

ibmvRtCfgFltNetID		1.3.6.1.4.1.2.6.2.18.4.1.10.1.1
Administrator defined object which specifies the VINES network number to be filtered on the port. The range of the network number is 00000000 - FFFFFFFE. If the network number, 0xFFFFFFFF, is defined, then all network numbers will be filtered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvRtCfgFltMode		1.3.6.1.4.1.2.6.2.18.4.1.10.1.2
The filtering action for the RTP router filter. The RTP router filters operate on the network number contained in the source network number field in the IP header of any RTP packet (update, request, response, and redirect). (The subnetwork ID is assumed to be 0x0001.) In deny mode, the IBM 6611 ignores route information from a service node if the sending router's network number matches any RTP router filter. In permit mode, the IBM 6611 processes route information from a router only if the sending router's network number matches any RTP router filter. The default for this object is 'deny'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

ibmvRtCfgFltUses		1.3.6.1.4.1.2.6.2.18.4.1.10.1.3
The number of times the defined filter was used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvRTP		1.3.6.1.4.1.2.6.2.18.4.2
OBJECT IDENTIFIER

ibmvrtpUpdSents		1.3.6.1.4.1.2.6.2.18.4.2.1
The number of routing update packets sent since the last reboot. The routing update packets are periodically broadcast by nodes to notify neighboring nodes of their existence. Router nodes include network topology information in these updates.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvrtpUpdRecs		1.3.6.1.4.1.2.6.2.18.4.2.2
The number of routing update packets received since the last reboot. The routing update packets are sent from neighboring node making known their existence. Packets received from router nodes include network topology information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvrtpReqSents		1.3.6.1.4.1.2.6.2.18.4.2.3
The number of routing request packets sent since the last reboot. Routing request packets are sent by a node when it requires an immediate update.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvrtpReqRecs		1.3.6.1.4.1.2.6.2.18.4.2.4
The number of routing request packets received since the last reboot. The 6611 receives routing request packets when another node requires an immediate update. The 6611 will send the update in a routing response packet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvrtpResSents		1.3.6.1.4.1.2.6.2.18.4.2.5
The number of routing response packets sent since the last reboot. Routing response packets are sent in response to a routing request packet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvrtpResRecs		1.3.6.1.4.1.2.6.2.18.4.2.6
The number of routing response packets received since the last reboot. When a node sends out a routing request packet, it receives a routing response packet which contains all the routing information requested.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvrtpRedSents		1.3.6.1.4.1.2.6.2.18.4.2.7
The number of routing redirect packets sent since the last reboot. The routing redirect packets are sent by a node to notify another node of a more direct path to a destination node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvrtpRedRecs		1.3.6.1.4.1.2.6.2.18.4.2.8
The number of routing redirect packets received since the last reboot. A 6611 receives a routing redirect packet when another node knows a more direct path to the destination node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvrtpHeaderError		1.3.6.1.4.1.2.6.2.18.4.2.9
The number of RTP packets received since the last reboot with a RTP header error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvRtNumber		1.3.6.1.4.1.2.6.2.18.4.3
The number of entires in the route table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtTable		1.3.6.1.4.1.2.6.2.18.4.4
A list of information about IBM's VINES router table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmvRtEntry

ibmvRtEntry		1.3.6.1.4.1.2.6.2.18.4.4.1
The information for each entry in the router table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmvRtEntry

ibmvRtNetid		1.3.6.1.4.1.2.6.2.18.4.4.1.1
The network ID of the router node's destination router node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvRtMetric		1.3.6.1.4.1.2.6.2.18.4.4.1.2
The routing metric used by the called router node to reach the destination. A routing metric is an estimated round-trip delay time associated with the router that maximum sized VINES IP packets will take to reach the destination. The metric reflects the cost of the path to the destination, it is in 200-millisecond units.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtIdle		1.3.6.1.4.1.2.6.2.18.4.4.1.3
The time to live timer for this router node's entry. This value indicates the amount of time before the entry is removed from the called router node's routing table. The value is returned in 90 second units.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtGateNetid		1.3.6.1.4.1.2.6.2.18.4.4.1.4
The network ID of the router node that acts as the router for reaching the destination router node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvRtIfIndex		1.3.6.1.4.1.2.6.2.18.4.4.1.5
The interface (using the MIB II standard) which identifies the local interface through which the next hop of this route should be reached. This number corresponds to the IfIndex object found in MIB II.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvRtState		1.3.6.1.4.1.2.6.2.18.4.4.1.6
The state the routing entry; permanent or not permanent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	permanent(1), nonpermanent(2)

ibmvicpExcGens		1.3.6.1.4.1.2.6.2.18.5.1
Number of exception notifications generated from this router node since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvicpMetricGens		1.3.6.1.4.1.2.6.2.18.5.2
The number of metric notifications generated from this router node since the last reboot. The ICP packet contains metric information about the final transmission medium used to reach a client node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvicpHeaderError		1.3.6.1.4.1.2.6.2.18.5.3
The number of ICP packets received since the last reboot with an ICP header error.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvFRPreassembles		1.3.6.1.4.1.2.6.2.18.6.1
The number of times packets were reassembled since the last reboot. One VINES IP packet being broken into three message fragments is counted as one fragmentation. The three fragments being reassembled into one VINES IP packet counts as one reassembly.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvFRPfragsReassembled		1.3.6.1.4.1.2.6.2.18.6.2
The number of fragments that were reassembled since the last reboot. If three fragments are to be reassembled into one packet, then this object value will add three to its total.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvFRPreasFails		1.3.6.1.4.1.2.6.2.18.6.3
The number of times the reassembly of fragments fails since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvFRPfragmented		1.3.6.1.4.1.2.6.2.18.6.4
The number of packet fragmentations performed since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvFRPfrgCreated		1.3.6.1.4.1.2.6.2.18.6.5
The number of fragments created since the last reboot when fragmenting VINES IP packets. If a VINES IP packet is fragmented into three fragments, then this object value will add three to its total.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvFRPfrgFails		1.3.6.1.4.1.2.6.2.18.6.6
The number of times the fragmentation of a VINES IP packets fails since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvPortCfgTable		1.3.6.1.4.1.2.6.2.18.7.1
The list of information about port configuration at each interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmvPortCfgEntry

ibmvPortCfgEntry		1.3.6.1.4.1.2.6.2.18.7.1.1
The information for each entry in the port configuration table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmvPortCfgEntry

ibmvPortCfgIfIndex		1.3.6.1.4.1.2.6.2.18.7.1.1.1
The interface (using the MIB II standard) which uniquely identifies each interface and allows multiple tables to be associated with a given interface. This number corresponds to the IfIndex object found in MIB II.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvPortCfgARP		1.3.6.1.4.1.2.6.2.18.7.1.1.2
Administrator defined value which specifies whether the router node will assign VINES addresses to clients that reside on the LAN attached to this port. The default value for this object is 'disable'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ibmvPortCfgServ		1.3.6.1.4.1.2.6.2.18.7.1.1.3
Administrator defined value specifying whether the serverless option is enables or disabled. When the serverless option is enabled; the router looks for particular broadcasts that clients use in finding the services on the VINES server. This allows client nodes on a serverless LAN to communicate with a VINES server more than one hop away. The default value for this object is 'disable'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ibmvPortCfgHCtoServ		1.3.6.1.4.1.2.6.2.18.7.1.1.4
Administrator defined value which specifies the number of hops from the client to the router node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvPortCfgPerUpdate		1.3.6.1.4.1.2.6.2.18.7.1.1.5
Administrator defined value which specifies whether periodic updates will be sent over a WAN link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2), na(3)

ibmvPortCfgMetric		1.3.6.1.4.1.2.6.2.18.7.1.1.6
Administrator defined value for port metric. This value overrides the metric which is used by the IBM 6611 to make routing decisions. If no response is provided to this parameter, the IBM 6611 will use defaults contained within the MPNP program. These defaults are based on values assigned by Banyan Systems for its VINES servers. The port metric is a rough estimate of the round trip delay for a maximum sized VINES IP packet to travel to any neighbor on this port. The unit for the metric value is 200 milliseconds. The default metric for an Ethernet port is 2. The default metric for a Token-Ring is determined by the response to the Token-Ring Data Rate parameter. The default metric for a serial port is determined by the response to the Serial-Line Speed parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvPortCfgTR		1.3.6.1.4.1.2.6.2.18.7.1.1.7
Administrator defined value which determines the encapsulation method used for receiving and transmitting VINES packets on this port. IEEE 802.5 LLC uses 802.2 encapsulation followed by an LLC field using SAP value 0xBC You cannot use IEEE 802.5 LLC encapsulation on the same port that performs data link switching, if the 0xBC SAP has been configured for frame forwarding by the data link switching function. IEEE 802.5 SNAP uses 802.2 encapsulation followed by a SNAP header using the organizationally unique ID 0x08 00 4A, the protocol id 0x80C4 for VINES IP and the protocol id 0x80C5 for VINES Link Level Echo.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	na(1), snap(2), vines-tr(3)

ibmvPortCfgEN		1.3.6.1.4.1.2.6.2.18.7.1.1.8
Administrator defined value which determines the encapsulation method used for receiving and transmitting VINES packets on this port. Ethernet II uses DIX encapsulation with a packet type 0x0BAD for VINES IP and 0x0BAF for VINES Link Level Echo. IEEE 802.3 SNAP uses 802.2 encapsulation followed by a SNAP header using the organizationally unique ID 0x08 00 4A, the protocol id 0x80C4 for VINES IP and the protocol id 0x80C5 for VINES Link Level Echo.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	na(1), snap(2), v2(3)

ibmvPortCfgInFlt		1.3.6.1.4.1.2.6.2.18.7.1.1.9
Administrator defined value which allows inbound port filters to be defined. The default value is 'disabled'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ibmvPortCfgInFltNum		1.3.6.1.4.1.2.6.2.18.7.1.1.10
The number of inbound port filters defined for this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvPortCfgOutFlt		1.3.6.1.4.1.2.6.2.18.7.1.1.11
Administrator defined value which allows outbound port filters to be defined. The default value is 'disabled'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

ibmvPortCfgOutFltNum		1.3.6.1.4.1.2.6.2.18.7.1.1.12
The number of outbound port filters defined for this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvFltTable		1.3.6.1.4.1.2.6.2.18.7.2
The list of information about port filter configurations at each interface .
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmvFltEntry

ibmvFltEntry		1.3.6.1.4.1.2.6.2.18.7.2.1
The information for each entry in the port filter configuration table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmvFltEntry

ibmvFltIfIndex		1.3.6.1.4.1.2.6.2.18.7.2.1.1
The value of this object identifies the interface for which this entry contains management information. The IfIndex allows a subset of the filter table to be associated with a particular interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvFltNo		1.3.6.1.4.1.2.6.2.18.7.2.1.2
A unique integer identifying this filter entry for this interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvFltMode		1.3.6.1.4.1.2.6.2.18.7.2.1.3
Identifies if the port filter is an inbound or outbound filter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inbound(1), outbound(2)

ibmvFltValue		1.3.6.1.4.1.2.6.2.18.7.2.1.4
An octet string representing the concatenation of VINES IP header fields and VINES transport header fields required by this filter entry. Incoming packets will be bitwise ANDed with the value of ibmvFltMask, and if the result is equal to the value of this object, the packet will be filtered according to the value of ibmvFltValue. Fields from VINES IP and transport headers used for filtering: field length field name ------------ ------------------------------ 8 BITS protocol type 4 BITS hop count 32 BITS destination network number 16 BITS destination subnetwork number 16 BITS destination port number 32 BITS source network number 16 BITS source subnetwork number 16 BITS source port number
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(18)

ibmvFltMask		1.3.6.1.4.1.2.6.2.18.7.2.1.5
An octet string indicating the parts of the VIP header and transport header relevant to this filter entry. This mask will be bitwise ANDed with the appropriate header fields; if the result is equal to the value of ibmvnFilterValue, the packet will be filtered according to the value of ibmvnFilterType.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(18)

ibmvFltType		1.3.6.1.4.1.2.6.2.18.7.2.1.6
Administrator defined value which determines the filtering mode for all filters defined on this port. If the port is using Deny mode, then all packets matching a defined port filter will be discarded. If the port is using Permit mode, then only the packets matching a defined port filter will be forwarded. The default value is Deny.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

ibmvFltHCCompare		1.3.6.1.4.1.2.6.2.18.7.2.1.7
Administrator defined value which indicates the relational association desired if filtering is being done based on hop count. If filtering is not being done based on hop count (that is, if the hop count portion of IBM VINES Port Mask is 0) the value of this object will be none(1).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	less-than(1), less-than-equal(2), equal(3), greater-than-equal(4), greater-than(5), na(6)

ibmvFltUses		1.3.6.1.4.1.2.6.2.18.7.2.1.8
This object counts how many times the defined filter was used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvifNumber		1.3.6.1.4.1.2.6.2.18.7.3
The number of VINES interfaces configured on the router node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmvifTable		1.3.6.1.4.1.2.6.2.18.7.4
List of interfaces with some statistics about each interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmvifEntry

ibmvifEntry		1.3.6.1.4.1.2.6.2.18.7.4.1
Information about one interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmvifEntry

ibmvifSlot		1.3.6.1.4.1.2.6.2.18.7.4.1.1
The slot number of the interface's communications card.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7

ibmvifPort		1.3.6.1.4.1.2.6.2.18.7.4.1.2
The port number of the interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..3

ibmvifDescr		1.3.6.1.4.1.2.6.2.18.7.4.1.3
A textual description of the interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmvifAddress		1.3.6.1.4.1.2.6.2.18.7.4.1.4
The physical address of the interface, applies to LAN interfaces only.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmvifInPkts		1.3.6.1.4.1.2.6.2.18.7.4.1.5
The total number of VINES IP packets that the router node received since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvifInErrs		1.3.6.1.4.1.2.6.2.18.7.4.1.6
The total number of received VINES IP packets that contained errors since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvifOutPkts		1.3.6.1.4.1.2.6.2.18.7.4.1.7
The total number of VINES IP packets that the router node sent since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmvifOutErrs		1.3.6.1.4.1.2.6.2.18.7.4.1.8
The total number of transmitted VINES IP packets that contained errors since the last reboot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNode		1.3.6.1.4.1.2.6.2.13.1
OBJECT IDENTIFIER

ibmappnGeneralInfoAndCaps		1.3.6.1.4.1.2.6.2.13.1.1
OBJECT IDENTIFIER

ibmappnNnUniqueInfoAndCaps		1.3.6.1.4.1.2.6.2.13.1.2
OBJECT IDENTIFIER

ibmappnEnUniqueCaps		1.3.6.1.4.1.2.6.2.13.1.3
OBJECT IDENTIFIER

ibmappnPortInformation		1.3.6.1.4.1.2.6.2.13.1.4
OBJECT IDENTIFIER

ibmappnLinkStationInformation		1.3.6.1.4.1.2.6.2.13.1.5
OBJECT IDENTIFIER

ibmappnSnmpInformation		1.3.6.1.4.1.2.6.2.13.1.6
OBJECT IDENTIFIER

ibmappnMemoryUse		1.3.6.1.4.1.2.6.2.13.1.7
OBJECT IDENTIFIER

ibmappnXidInformation		1.3.6.1.4.1.2.6.2.13.1.8
OBJECT IDENTIFIER

ibmappnNodeCpName		1.3.6.1.4.1.2.6.2.13.1.1.1
Administratively-assigned network name for this node in the format NETID.CPNAME.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnNodeNetid		1.3.6.1.4.1.2.6.2.13.1.1.2
Administratively-assigned APPN network identification, which can be from one to eight characters. This ID is used with the control point name to create a fully-qualified control point name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnNodeBlockNum		1.3.6.1.4.1.2.6.2.13.1.1.3
The block number is the first three digits of the node_id. These 3 hexadecimal digits identify the product and are not configurable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3)

ibmappnNodeIdNum		1.3.6.1.4.1.2.6.2.13.1.1.4
The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(5)

ibmappnNodeType		1.3.6.1.4.1.2.6.2.13.1.1.5
Type of APPN node, either network, len, or end node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	networkNode(1), endNode(2), len(4)

ibmappnNodeUpTime		1.3.6.1.4.1.2.6.2.13.1.1.6
Time (in hundredths of a second) since this APPN node was initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnNodeNegotLs		1.3.6.1.4.1.2.6.2.13.1.1.7
Indicates whether this node supports negotiable link stations.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeSegReasm		1.3.6.1.4.1.2.6.2.13.1.1.8
Indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeBindReasm		1.3.6.1.4.1.2.6.2.13.1.1.9
Indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeParallelTg		1.3.6.1.4.1.2.6.2.13.1.1.10
Indicates whether this node supports parallel TGs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeService		1.3.6.1.4.1.2.6.2.13.1.1.11
Indicates whether this node allows call-in from nodes not defined locally.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeAdaptiveBindPacing		1.3.6.1.4.1.2.6.2.13.1.1.12
Indicates whether this node supports adaptive bind pacing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeNnRcvRegChar		1.3.6.1.4.1.2.6.2.13.1.2.1
Indicates whether this node supports receiving registered characteristics.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeNnGateway		1.3.6.1.4.1.2.6.2.13.1.2.2
Indicates whether this is a gateway node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeNnCentralDirectory		1.3.6.1.4.1.2.6.2.13.1.2.3
Indicates whether this node supports central directory cache.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeNnTreeCache		1.3.6.1.4.1.2.6.2.13.1.2.4
Indicates whether this node supports route tree cache.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeNnTreeUpdate		1.3.6.1.4.1.2.6.2.13.1.2.5
Indicates whether this node supports incremental_tree_update, which is only supported when tree caching is supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeNnRouteAddResist		1.3.6.1.4.1.2.6.2.13.1.2.6
Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeNnIsr		1.3.6.1.4.1.2.6.2.13.1.2.7
Indicates whether the node supports intermediate session routing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeNnFrsn		1.3.6.1.4.1.2.6.2.13.1.2.8
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update to adjacent network nodes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmappnNodeEnSegGen		1.3.6.1.4.1.2.6.2.13.1.3.1
Indicates whether this end node supports segment generation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeEnModeCosMap		1.3.6.1.4.1.2.6.2.13.1.3.2
Indicates whether this end node supports mode name to COS name mapping.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeEnLocateCdinit		1.3.6.1.4.1.2.6.2.13.1.3.3
Indicates whether this end node supports Locate Cdinit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeEnSendRegNames		1.3.6.1.4.1.2.6.2.13.1.3.4
Indicates whether the node will register its LUs with the adjacent serving network node: NO - do not register names YES - register names
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeEnSendRegChar		1.3.6.1.4.1.2.6.2.13.1.3.5
Indicates whether this node supports send register characteristics, which is only supported when send registered names is also supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodePortTable		1.3.6.1.4.1.2.6.2.13.1.4.1
The Port table describes the configuration and current status of the ports used by APPN. The type of DLC is included in this table as a pointer to the DLC port specific tables.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNodePortEntry

ibmappnNodePortEntry		1.3.6.1.4.1.2.6.2.13.1.4.1.1
The Port Name is used as the index to this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNodePortEntry

ibmappnNodePortName		1.3.6.1.4.1.2.6.2.13.1.4.1.1.1
Administratively-assigned name for this APPN port. The name can be from one to eight characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnNodePortState		1.3.6.1.4.1.2.6.2.13.1.4.1.1.2
Indicates the current state of this port.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	inactive(1), pendactive(2), active(3), pendinact(4)

ibmappnNodePortDlcType		1.3.6.1.4.1.2.6.2.13.1.4.1.1.3
The type of DLC interface, distinguished according to the protocol immediately 'below' this layer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), sdlc(2), dls(3), socket(4), ethernet(5), tokenRing(6)

ibmappnNodePortPortType		1.3.6.1.4.1.2.6.2.13.1.4.1.1.4
Identifies the type of line used by this port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	leased(1), switched(2), sharedAccessFacilities(3)

ibmappnNodePortSIMRIM		1.3.6.1.4.1.2.6.2.13.1.4.1.1.5
Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodePortLsRole		1.3.6.1.4.1.2.6.2.13.1.4.1.1.6
Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	primary(1), secondary(2), negotiable(3), abm(4)

ibmappnNodePortMaxRcvBtuSize		1.3.6.1.4.1.2.6.2.13.1.4.1.1.7
Maximum Basic Transmission Size (BTU) that a link station on this port can receive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodePortMaxIframeWindow		1.3.6.1.4.1.2.6.2.13.1.4.1.1.8
Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodePortDefLsGoodXids		1.3.6.1.4.1.2.6.2.13.1.4.1.1.9
The total number of successfull XIDs that have occurred on all defined link stations on this port since the last time this port was started.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodePortDefLsBadXids		1.3.6.1.4.1.2.6.2.13.1.4.1.1.10
The total number of unsuccessfull XIDs that have occurred on all defined link stations on this port since the last time this port was started.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodePortDynLsGoodXids		1.3.6.1.4.1.2.6.2.13.1.4.1.1.11
The total number of successfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodePortDynLsBadXids		1.3.6.1.4.1.2.6.2.13.1.4.1.1.12
The total number of unsuccessfull XIDs that have occurred on all dynamic link stations on this port since the last time this port was started.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodePortSpecific		1.3.6.1.4.1.2.6.2.13.1.4.1.1.13
Identifies the port specific OBJECT IDENTIFIER that can provide additional information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ibmappnNodePortIpTable		1.3.6.1.4.1.2.6.2.13.1.4.2
Port table (TCP/IP specific).
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNodePortIpEntry

ibmappnNodePortIpEntry		1.3.6.1.4.1.2.6.2.13.1.4.2.1
The IP Name is used as the index to this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNodePortIpEntry

ibmappnNodePortIpName		1.3.6.1.4.1.2.6.2.13.1.4.2.1.1
Administratively-assigned name for this APPN port. The name can be from one to eight characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnNodePortIpPortNum		1.3.6.1.4.1.2.6.2.13.1.4.2.1.2
Local TCP/IP port number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodePortDlsTable		1.3.6.1.4.1.2.6.2.13.1.4.3
Port table (DLS specific).
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNodePortDlsEntry

ibmappnNodePortDlsEntry		1.3.6.1.4.1.2.6.2.13.1.4.3.1
The DLS Name is used as the index to this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNodePortDlsEntry

ibmappnNodePortDlsName		1.3.6.1.4.1.2.6.2.13.1.4.3.1.1
Administratively-assigned name for this APPN DLS port. The name can be from one to eight characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnNodePortDlsMac		1.3.6.1.4.1.2.6.2.13.1.4.3.1.2
Local DLS MAC address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmappnNodePortDlsSap		1.3.6.1.4.1.2.6.2.13.1.4.3.1.3
Local DLS Sap address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmappnNodePortTrTable		1.3.6.1.4.1.2.6.2.13.1.4.4
Port table (Token Ring specific).
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNodePortTrEntry

ibmappnNodePortTrEntry		1.3.6.1.4.1.2.6.2.13.1.4.4.1
The TR Name is used as the index to this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNodePortTrEntry

ibmappnNodePortTrName		1.3.6.1.4.1.2.6.2.13.1.4.4.1.1
Administratively-assigned name for this APPN port. The name can be from one to eight characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnNodePortTrMac		1.3.6.1.4.1.2.6.2.13.1.4.4.1.2
Local Token Ring MAC address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmappnNodePortTrSap		1.3.6.1.4.1.2.6.2.13.1.4.4.1.3
Local Token Ring Sap address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmappnNodePortDlcTraceTable		1.3.6.1.4.1.2.6.2.13.1.4.5
Port table generic DLC trace table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNodePortDlcTraceEntry

ibmappnNodePortDlcTraceEntry		1.3.6.1.4.1.2.6.2.13.1.4.5.1
The Port name and a dynamic integer are the index to this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNodePortDlcTraceEntry

ibmappnNodePortDlcTracPortName		1.3.6.1.4.1.2.6.2.13.1.4.5.1.1
The Port name associated with this this trace table entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmappnNodePortDlcTracIndex		1.3.6.1.4.1.2.6.2.13.1.4.5.1.2
This index value is updated every time a new trace entry is created which provides a means to retrieve only the updated entries and also provides a simple method of correlating the entries. The table will wrap when the table is full, which will result in previous entries being written over. The mangement station can over come this by retrieving the table using this index to retrieve only the new table entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodePortDlcTracDlcType		1.3.6.1.4.1.2.6.2.13.1.4.5.1.3
The type of DLC interface, distinguished according to the protocol immediately 'below' this layer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), sdlc(2), dls(3), socket(4), ethernet(5), tokenRing(6)

ibmappnNodePortDlcTracLocalAddr		1.3.6.1.4.1.2.6.2.13.1.4.5.1.4
Local address in format described below: other = free form DisplayString ip = ld.ld.ld.ld/2d tr = lx:lx:lx:lx:lx:lx.lx dlsw = lx:lx:lx:lx:lx:lx.lx ethernet = lx:lx:lx:lx:lx:lx.lx
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmappnNodePortDlcTracRemoteAddr		1.3.6.1.4.1.2.6.2.13.1.4.5.1.5
Remote Address in the format described below: other = free form DisplayString ip = ld.ld.ld.ld/2d tr = lx:lx:lx:lx:lx:lx.lx dlsw = lx:lx:lx:lx:lx:lx.lx ethernet = lx:lx:lx:lx:lx:lx.lx
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmappnNodePortDlcTracMsgType		1.3.6.1.4.1.2.6.2.13.1.4.5.1.6
Indicates the type of trace record entry
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), request(3), confirm(4), indication(5), response(6)

ibmappnNodePortDlcTracCmdType		1.3.6.1.4.1.2.6.2.13.1.4.5.1.7
Indicates the command type of the trace entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	testFrame(1), respFrame(2), curFrame(3), icrFrame(4), respAck(5), dgrmFrame(6), xidFrame(7), contFrame(8), contedFrame(9), iFrame(10), enterBusy(12), exitBusy(13), haltFrame(14), lsHalted(15), restartLs(16), lsRestarted(17), netBioSnq(18), netBioSnr(19), gnetFrame(20), netdFrame(21), oobFrame(22), alterSap(23), testRsp(24), haltLsNow(25), netBioAnq(26), netBioAnr(27), mibLsFrame(28), iamOkay(29), ipTestFrame(2001), ipRespFrame(2002), ipCurFrame(2003), ipIcrFrame(2004), ipRespAck(2005), ipDgrmFrame(2006), ipXidFrame(2007), ipContFrame(2008), ipContedFrame(2009), ipIFrame(2010), ipEnterBusy(2012), ipExitBusy(2013), ipHaltFrame(2014), ipLsHalted(2015), ipRestartLs(2016), ipLsRestarted(2017), ipNetBioSnq(2018), ipNetBioSnr(2019), ipGnetFrame(2020), ipNetdFrame(2021), ipOobFrame(2022), ipAlterSap(2023), ipTestRsp(2024), ipHaltLsNow(2025), ipNetBioAnq(2026), ipNetBioAnr(2027), ipMibLsFrame(2028), ipIamOkay(2029), dlsTestReq(4122), dlsTestRsp(4123), dlsIpm(4124), trTestFrame(6001), trRespFrame(6002), trCurFrame(6003), trIcrFrame(6004), trRespAck(6005), trDgrmFrame(6006), trXidFrame(6007), trContFrame(6008), trContedFrame(6009), trIFrame(6010), trEnterBusy(6012), trExitBusy(6013), trHaltFrame(6014), trLsHalted(6015), trRestartLs(6016), trLsRestarted(6017), trNetBioSnq(6018), trNetBioSnr(6019), trGnetFrame(6020), trNetdFrame(6021), trOobFrame(6022), trAlterSap(6023), trTestRsp(6024), trHaltLsNow(6025), trNetBioAnq(6026), trNetBioAnr(6027), trMibLsFrame(6028), trIamOkay(6029)

ibmappnNodePortDlcTracUseWan		1.3.6.1.4.1.2.6.2.13.1.4.5.1.8

Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), notApplicable(2), useUnknown(3), useWan(4), useLan(5)

ibmappnNodeLsTable		1.3.6.1.4.1.2.6.2.13.1.5.1
This table contains detail information about the link station configuration and current status.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNodeLsEntry

ibmappnNodeLsEntry		1.3.6.1.4.1.2.6.2.13.1.5.1.1
This table is indexed by the link station name.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNodeLsEntry

ibmappnNodeLsName		1.3.6.1.4.1.2.6.2.13.1.5.1.1.1
Administratively-assigned name for the link station. The name can be from one to eight characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnNodeLsPortName		1.3.6.1.4.1.2.6.2.13.1.5.1.1.2
Administratively-assigned name for the port. The name can be from one to eight characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnNodeLsDlcType		1.3.6.1.4.1.2.6.2.13.1.5.1.1.3
The type of DLC interface, distinguished according to the protocol immediately 'below' this layer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), sdlc(2), dls(3), socket(4), ethernet(5), tokenRing(6)

ibmappnNodeLsDynamic		1.3.6.1.4.1.2.6.2.13.1.5.1.1.4
Identifies whether this resource is a dynamic link station. Dynamic link stations are created when adjacent nodes that have not been locally defined establish a connection with this node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeLsState		1.3.6.1.4.1.2.6.2.13.1.5.1.1.5
State of this link station.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	inactive(1), pendactive(2), active(3), pendinact(4)

ibmappnNodeLsCpName		1.3.6.1.4.1.2.6.2.13.1.5.1.1.6
Fully-qualified name of the adjacent node for this link station. The name can be from three to seventeen characters. Format is netid.cpname.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnNodeLsTgNum		1.3.6.1.4.1.2.6.2.13.1.5.1.1.7
Number associated with the TG to this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeLsLimResource		1.3.6.1.4.1.2.6.2.13.1.5.1.1.8
Indicates whether the link station is a limited resource. If it is, the TG is deactivated when there are no sessions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeLsMigration		1.3.6.1.4.1.2.6.2.13.1.5.1.1.9
Indicates whether this link station will be used for connections to down-level or migration partners.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeLsBlockNum		1.3.6.1.4.1.2.6.2.13.1.5.1.1.10
The block number is the first three digits of the node_id. These 3 hexideimal digits identify the product and are not configurable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3)

ibmappnNodeLsIdNum		1.3.6.1.4.1.2.6.2.13.1.5.1.1.11
The ID number is the last 5 digits of the node_id. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is include in APPN alerts as well as being included in XIDs. A unique value is required for connections to SNA sub-area.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(5)

ibmappnNodeLsCpCpSession		1.3.6.1.4.1.2.6.2.13.1.5.1.1.12
Indicates whether CP-CP sessions are supported by this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNodeLsTargetPacingCount		1.3.6.1.4.1.2.6.2.13.1.5.1.1.13
Numeric value between 0 and 32767 inclusive indicating the desired pacing window size for BINDs on this TG. The number is significant only when fixed bind pacing is being performed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeLsMaxSendBtuSize		1.3.6.1.4.1.2.6.2.13.1.5.1.1.14
Numeric value between 0 and 32767 inclusive indicating the desired number of bytes in a Basic Transmission Unit (BTU) that can be sent on this TG. This is an administratively assigned value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeLsEffCap		1.3.6.1.4.1.2.6.2.13.1.5.1.1.15
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeLsConnCost		1.3.6.1.4.1.2.6.2.13.1.5.1.1.16
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNodeLsByteCost		1.3.6.1.4.1.2.6.2.13.1.5.1.1.17
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNodeLsSecurity		1.3.6.1.4.1.2.6.2.13.1.5.1.1.18
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)

ibmappnNodeLsDelay		1.3.6.1.4.1.2.6.2.13.1.5.1.1.19
Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)

ibmappnNodeLsUsr1		1.3.6.1.4.1.2.6.2.13.1.5.1.1.20
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNodeLsUsr2		1.3.6.1.4.1.2.6.2.13.1.5.1.1.21
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNodeLsUsr3		1.3.6.1.4.1.2.6.2.13.1.5.1.1.22
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with the TG using this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNodeLsInXidBytes		1.3.6.1.4.1.2.6.2.13.1.5.1.1.23
Number of XID bytes received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsInMsgBytes		1.3.6.1.4.1.2.6.2.13.1.5.1.1.24
Number of message (I-frame) bytes received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsInXidFrames		1.3.6.1.4.1.2.6.2.13.1.5.1.1.25
Number of XID frames received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsInMsgFrames		1.3.6.1.4.1.2.6.2.13.1.5.1.1.26
Number of message (I-frame) frames received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsOutXidBytes		1.3.6.1.4.1.2.6.2.13.1.5.1.1.27
Number of XID bytes sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsOutMsgBytes		1.3.6.1.4.1.2.6.2.13.1.5.1.1.28
Number of message (I-frame) bytes sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsOutXidFrames		1.3.6.1.4.1.2.6.2.13.1.5.1.1.29
Number of XID frames sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsOutMsgFrames		1.3.6.1.4.1.2.6.2.13.1.5.1.1.30
Number of message (I-frame) frames sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsEchoRsps		1.3.6.1.4.1.2.6.2.13.1.5.1.1.31
Number of responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adjacent nodes periodically to verify connectivity and to measure that actual round trip time, that is the time the test frame is sent until the response is received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsCurrentDelay		1.3.6.1.4.1.2.6.2.13.1.5.1.1.32
The time that it took for the last test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeLsMaxDelay		1.3.6.1.4.1.2.6.2.13.1.5.1.1.33
The longest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds .
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeLsMinDelay		1.3.6.1.4.1.2.6.2.13.1.5.1.1.34
The shortest time it took for a test signal to be sent and returned from this link station to the adjacent links station. This time is represented in milliseconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeLsMaxDelayTime		1.3.6.1.4.1.2.6.2.13.1.5.1.1.35
The time (since system up in hundredth of seconds) when the longest delay occurred. This time can be used to identify when this high water mark occurred in relation to the last initialization of the APPN node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnNodeLsGoodXids		1.3.6.1.4.1.2.6.2.13.1.5.1.1.36
The total number of successful XIDs that have occurred on this link station since the time it was started.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsBadXids		1.3.6.1.4.1.2.6.2.13.1.5.1.1.37
The total number of unsuccessful XIDs that have occurred on this link station since the time it was started.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeLsSpecific		1.3.6.1.4.1.2.6.2.13.1.5.1.1.38
Identifies the DLC specific OBJECT IDENTIFIER that can provide additional information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OBJECT IDENTIFIER

ibmappnNodeLsSubState		1.3.6.1.4.1.2.6.2.13.1.5.1.1.39
State of this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), sentReqOpnstn(2), pendXidExch(3), sentActAs(4), sentSetMode(5), active(6), sentDeactAsOrd(7), sentDiscOrd(8), sentDestroyTg(9), sentCreateTg(10), sentConnReq(11), pendRcvConnInd(12), pendSendConnRsp(13), sentConnRsp(14), pendDeact(15)

ibmappnNodeLsStartTime		1.3.6.1.4.1.2.6.2.13.1.5.1.1.40
The time (in hundredth of seconds) this link station has been active the last time since the time APPN was initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnNodeLsActiveTime		1.3.6.1.4.1.2.6.2.13.1.5.1.1.41
The time (in hundredth of seconds) this link station has been in the active state. A zero value indicates the link station has never been active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnNodeLsCurrentStateTime		1.3.6.1.4.1.2.6.2.13.1.5.1.1.42
The time (in hundredth of seconds) the link station is in the current state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnNodeLsIpTable		1.3.6.1.4.1.2.6.2.13.1.5.2
Link station table (TCP/IP specific).
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNodeLsIpEntry

ibmappnNodeLsIpEntry		1.3.6.1.4.1.2.6.2.13.1.5.2.1
The IP Name is used as the index to this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNodeLsIpEntry

ibmappnNodeLsIpName		1.3.6.1.4.1.2.6.2.13.1.5.2.1.1
Administratively-assigned name for this link station. The name can be from one to eight characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnNodeLsIpState		1.3.6.1.4.1.2.6.2.13.1.5.2.1.2
State of this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), pendactive(2), active(3), pendinact(4)

ibmappnNodeLsLocalIpAddr		1.3.6.1.4.1.2.6.2.13.1.5.2.1.3
Local IP address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ibmappnNodeLsLocalIpPortNum		1.3.6.1.4.1.2.6.2.13.1.5.2.1.4
Local TCP/IP port number. The default listening port will be administratively assigned and will dynamically change if this node initiates a session with adjacent node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeLsRemoteIpAddr		1.3.6.1.4.1.2.6.2.13.1.5.2.1.5
Remote IP address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

ibmappnNodeLsRemoteIpPortNum		1.3.6.1.4.1.2.6.2.13.1.5.2.1.6
Remote TCP/IP port number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeLsDlsTable		1.3.6.1.4.1.2.6.2.13.1.5.3
Ls Table (DLS specific).
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNodeLsDlsEntry

ibmappnNodeLsDlsEntry		1.3.6.1.4.1.2.6.2.13.1.5.3.1
The DLS Name is used as the index to this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNodeLsDlsEntry

ibmappnNodeLsDlsName		1.3.6.1.4.1.2.6.2.13.1.5.3.1.1
Administratively-assigned name for this link station. The name can be from one to eight characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnNodeLsDlsState		1.3.6.1.4.1.2.6.2.13.1.5.3.1.2
State of this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), pendactive(2), active(3), pendinact(4)

ibmappnNodeLsLocalDlsMac		1.3.6.1.4.1.2.6.2.13.1.5.3.1.3
Local MAC address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmappnNodeLsLocalDlsSap		1.3.6.1.4.1.2.6.2.13.1.5.3.1.4
Local SAP address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmappnNodeLsRemoteDlsMac		1.3.6.1.4.1.2.6.2.13.1.5.3.1.5
Remote MAC address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmappnNodeLsRemoteDlsSap		1.3.6.1.4.1.2.6.2.13.1.5.3.1.6
Remote SAP address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmappnNodeLsTrTable		1.3.6.1.4.1.2.6.2.13.1.5.4
Ls Table (Token Ring specific).
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNodeLsTrEntry

ibmappnNodeLsTrEntry		1.3.6.1.4.1.2.6.2.13.1.5.4.1
The TR Name is used as the index to this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNodeLsTrEntry

ibmappnNodeLsTrName		1.3.6.1.4.1.2.6.2.13.1.5.4.1.1
Administratively-assigned name for this link station. The name can be from one to eight characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnNodeLsTrState		1.3.6.1.4.1.2.6.2.13.1.5.4.1.2
State of this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), pendactive(2), active(3), pendinact(4)

ibmappnNodeLsLocalTrMac		1.3.6.1.4.1.2.6.2.13.1.5.4.1.3
Local MAC address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmappnNodeLsLocalTrSap		1.3.6.1.4.1.2.6.2.13.1.5.4.1.4
Local SAP address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmappnNodeLsRemoteTrMac		1.3.6.1.4.1.2.6.2.13.1.5.4.1.5
Remote MAC address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

ibmappnNodeLsRemoteTrSap		1.3.6.1.4.1.2.6.2.13.1.5.4.1.6
Remote SAP address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmappnNodeLsStatusTable		1.3.6.1.4.1.2.6.2.13.1.5.5
This table contains information related to exceptional and potential exceptional conditions that occur during the activation, XID exchange, and termination of the connection.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNodeLsStatusEntry

ibmappnNodeLsStatusEntry		1.3.6.1.4.1.2.6.2.13.1.5.5.1
This table is indexed by the LsStatusIndex, which is an integer that is continuously updated until it eventually wraps. This provides the management station the ability to retrieve only the updates to the table by using the standard GET NEXT.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNodeLsStatusEntry

ibmappnNodeLsStatusIndex		1.3.6.1.4.1.2.6.2.13.1.5.5.1.1
Table index. The value of the index begins at zero and is incremented up to a maximum value of 2**31-1 (2,147,483,647) before wrapping.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeLsStatusTime		1.3.6.1.4.1.2.6.2.13.1.5.5.1.2
Time (in hundreds of a second) since this node was last initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnNodeLsStatusLsName		1.3.6.1.4.1.2.6.2.13.1.5.5.1.3
Administratively-assigned name for this link station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnNodeLsStatusCpName		1.3.6.1.4.1.2.6.2.13.1.5.5.1.4
Administratively-assigned fully-qualified name of the adjacent node partner. This will be provided when the adjacent node has been defined at this node or when the XID sequence has proceeded far enough to to identify the adjacent node. A blank CP name will indicate the name is unknown.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..18)

ibmappnNodeLsStatusNodeId		1.3.6.1.4.1.2.6.2.13.1.5.5.1.5
Adjacent Node id
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmappnNodeLsStatusTgNum		1.3.6.1.4.1.2.6.2.13.1.5.5.1.6
Number associated with the TG to this link station with a range from 0 to 256. A value of 256 indicates the tg number has not been negotiated and is unknown at this time.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..256

ibmappnNodeLsStatusGeneralSense		1.3.6.1.4.1.2.6.2.13.1.5.5.1.7
The error sense code associated with the start sequence of activation of a link up to the beginning of the XID sequence.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmappnNodeLsStatusNofRetry		1.3.6.1.4.1.2.6.2.13.1.5.5.1.8
Indicates whether NOF will retry the start request to activate the link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	retry(1), noretry(2)

ibmappnNodeLsStatusEndSense		1.3.6.1.4.1.2.6.2.13.1.5.5.1.9
The sense code associated with the termination of the link connection to adjacent node. This includes all sense information included in the disconnect recieved from the lower layer DLCs and also sense information indicating the link termination originated by upper layer APPN components.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmappnNodeLsStatusXidLocalSense		1.3.6.1.4.1.2.6.2.13.1.5.5.1.10
The error sense code associated with the rejection of the XID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmappnNodeLsStatusXidRemoteSense		1.3.6.1.4.1.2.6.2.13.1.5.5.1.11
The error sense code adjacent node returned to this node indicating the reason the XID was rejected.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmappnNodeLsStatusXidByteInError		1.3.6.1.4.1.2.6.2.13.1.5.5.1.12
This identifies the actual byte in the XID that caused the error. The value of zero (0) indicates that the variable has no meaning.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	na(1000)

ibmappnNodeLsStatusXidBitInError		1.3.6.1.4.1.2.6.2.13.1.5.5.1.13
This identifies the actual bit within the error byte of the XID. This only has meaning when the byte in error is greater than zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	na(8)

ibmappnNodeLsStatusDlcType		1.3.6.1.4.1.2.6.2.13.1.5.5.1.14
This identifies DLC type that was being used when error occurred. This also is used to the format of the local and remote address provided. other = free form DisplayString ip = ld.ld.ld.ld/2d tr = lx:lx:lx:lx:lx:lx.lx dlsw = lx:lx:lx:lx:lx:lx.lx ethernet = lx:lx:lx:lx:lx:lx.lx
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), sdlc(2), dls(3), socket(4), ethernet(5), tr(6)

ibmappnNodeLsStatusLocalAddr		1.3.6.1.4.1.2.6.2.13.1.5.5.1.15
This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmappnNodeLsStatusRemoteAddr		1.3.6.1.4.1.2.6.2.13.1.5.5.1.16
This contains a displayable string that identifies the DLC type and appropriate address. See DlcType above for details of the format.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmappnSnmpInPkts		1.3.6.1.4.1.2.6.2.13.1.6.1
Total number of messages delivered to the APPN SNMP sub-agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnSnmpInGetRequests		1.3.6.1.4.1.2.6.2.13.1.6.2
Total number of GET requests delivered to the APPN SNMP sub-agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnSnmpInGetNexts		1.3.6.1.4.1.2.6.2.13.1.6.3
Total number of GETNEXT requests delivered to the APPN SNMP sub-agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnSnmpInSetRequests		1.3.6.1.4.1.2.6.2.13.1.6.4
Total number of SET requests delivered to the APPN SNMP sub-agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnSnmpInTotalVars		1.3.6.1.4.1.2.6.2.13.1.6.5
Total number of VARIABLES included in both GET and GETNEXT requests to the APPN SNMP sub-agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnSnmpInGetVars		1.3.6.1.4.1.2.6.2.13.1.6.6
Total number of VARIBLES included in all GET requests to the APPN SNMP sub-agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnSnmpInGetNextVars		1.3.6.1.4.1.2.6.2.13.1.6.7
Total number of VARIABLES included in all GETNEXT requests to the APPN SNMP sub-agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnSnmpInSetVars		1.3.6.1.4.1.2.6.2.13.1.6.8
Total number of VARIBLES included in all SET requests to the APPN SNMP sub-agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnSnmpOutNoSuchNames		1.3.6.1.4.1.2.6.2.13.1.6.9
Total number of VARIABLES that could not be found by the APPN SNMP sub-agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnSnmpOutGenErrs		1.3.6.1.4.1.2.6.2.13.1.6.10
Total number of undefined errors that occurred processing SNMP request to the APPN SNMP sub-agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnMemorySize		1.3.6.1.4.1.2.6.2.13.1.7.1
Size of the shared storage segment, as obtained by storage management from the underlying operating system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnMemoryUsed		1.3.6.1.4.1.2.6.2.13.1.7.2
Number of bytes in the segment that are currently allocated to process.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnMemoryWarnThresh		1.3.6.1.4.1.2.6.2.13.1.7.3
Allocation threshold beyond which storage management considers the storage resources to be constrained.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnMemoryCritThresh		1.3.6.1.4.1.2.6.2.13.1.7.4
Allocation threshold beyond which storage management considers the storage resources to be critically constrained.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNodeDefLsGoodXids		1.3.6.1.4.1.2.6.2.13.1.8.1
The current number of successfull XIDs that have occurred on all defined link stations since the last time this node was initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeDefLsBadXids		1.3.6.1.4.1.2.6.2.13.1.8.2
The current number of unsuccessfull XIDs that have occurred on all defined link stations since the last time this node was initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeDynLsGoodXids		1.3.6.1.4.1.2.6.2.13.1.8.3
The current number of successfull XIDs that have occurred on all dynamic link stations since the last time this node was initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNodeDynLsBadXids		1.3.6.1.4.1.2.6.2.13.1.8.4
The current number of unsuccessfull XIDs that have occurred on all dynamic link stations since the last time this node was initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNn		1.3.6.1.4.1.2.6.2.13.2
OBJECT IDENTIFIER

ibmappnNnTopo		1.3.6.1.4.1.2.6.2.13.2.1
OBJECT IDENTIFIER

ibmappnNnTopology		1.3.6.1.4.1.2.6.2.13.2.3
OBJECT IDENTIFIER

ibmappnNnTopoMaxNodes		1.3.6.1.4.1.2.6.2.13.2.1.1
Maximum number of nodes allowed in the APPN topology database This administratively assigned value must be equal to or greater than the maximum total number of end nodes and network nodes. If the number of nodes exceeds this value, APPN will issue an Alert and the node can no longer participate as a network node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNnTopoCurNumNodes		1.3.6.1.4.1.2.6.2.13.2.1.2
Current number of nodes in this node's topology database. If this value exceeds the maximum number of nodes allowed (NnTopoMaxNodes), APPN alert CPDB002 is issued.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnNnTopoInTdus		1.3.6.1.4.1.2.6.2.13.2.1.3
Total number of TDUs received from all adjacent NN since last initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoOutTdus		1.3.6.1.4.1.2.6.2.13.2.1.4
Total number of TDUs built by this node to be sent to all adjacent NN since last initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoNodeLowRsns		1.3.6.1.4.1.2.6.2.13.2.1.5
Total number of topology node updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs, but this node will send a TDU with it's higher RSN to the adjacent node that sent this low RSN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoNodeEqualRsns		1.3.6.1.4.1.2.6.2.13.2.1.6
Total number of topology node updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoNodeGoodHighRsns		1.3.6.1.4.1.2.6.2.13.2.1.7
Total number of topology node updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes. It is not required to send a TDU to the sender of this update because that node already has the update.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoNodeBadHighRsns		1.3.6.1.4.1.2.6.2.13.2.1.8
Total number of topology node updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detected by one of the APPN network nodes. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoNodeStateUpdates		1.3.6.1.4.1.2.6.2.13.2.1.9
Total number of topology Node records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDUs to all adjacent network nodes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoNodeErrors		1.3.6.1.4.1.2.6.2.13.2.1.10
Total number of topology node records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a data inconsistency. This node will create a TDU with the current RSN incremented to the next odd number and broadcast it to all adjacent NNs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoNodeTimerUpdates		1.3.6.1.4.1.2.6.2.13.2.1.11
Total number of topology node records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates insure other network nodes do not delete this node's resources from their topology database.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoNodePurges		1.3.6.1.4.1.2.6.2.13.2.1.12
Total number of topology node records purged from this node's topology database. This occurs when a node has not been updated in a specified amount of time. The owning node is responsible for broadcasting updates for its resource that it wants kept in the network topology.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoTgLowRsns		1.3.6.1.4.1.2.6.2.13.2.1.13
Total number of topology TG updates received by this node with a RSN less than the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs, but this node will send a TDU with it's higher RSN to the sender of the low RSN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoTgEqualRsns		1.3.6.1.4.1.2.6.2.13.2.1.14
Total number of topology TG updates received by this node with a RSN equal to the current RSN. Both even and odd RSN are included in this count. These TDUs are not errors, but result when TDUs are broadcast to all adjacent network nodes. No update to this node's topology database occurs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoTgGoodHighRsns		1.3.6.1.4.1.2.6.2.13.2.1.15
Total number of topology TG updates received by this node with a RSN greater than the current RSN. This results in updating this nodes topology and broadcasting the update to all adjacent network nodes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoTgBadHighRsns		1.3.6.1.4.1.2.6.2.13.2.1.16
Total number of topology TG updates received by this node with an odd RSN greater than the current RSN. These updates represent a topology inconsistency detected by one of the APPN network nodes. This results in updating this nodes topology and broadcasting a TDU to all adjacent network nodes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoTgStateUpdates		1.3.6.1.4.1.2.6.2.13.2.1.17
Total number of topology TG records built as a result of internally detected node state changes that affect APPN topology and routing. Updates are sent via TDUs to all adjacent network nodes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoTgErrors		1.3.6.1.4.1.2.6.2.13.2.1.18
Total number of topology TG records inconsistencies detected by this node. This occurs when this node attempts to update its topology database and detects a data inconsistency. This node will create a TDU with the current RSN incremented to the next odd number and broadcast it to all adjacent NNs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoTgTimerUpdates		1.3.6.1.4.1.2.6.2.13.2.1.19
Total number of topology TG records built for this node's resource due to timer updates. Updates are sent via TDUs to all adjacent network nodes. These updates insure other network nodes do not delete this node's resources from their topology database.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoTgPurges		1.3.6.1.4.1.2.6.2.13.2.1.20
Total number of topology TG records purged from this node's topology database. This occurs when a TG has not been updated in a specified amount of time. The owning node is responsible for broadcasting updates for its resource that it wants to keep in the network topology.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoTotalRouteCalcs		1.3.6.1.4.1.2.6.2.13.2.1.21
Number of routes calculated for all class of services since the last initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoTotalRouteRejs		1.3.6.1.4.1.2.6.2.13.2.1.22
Number of route requests for all class of services that could not be calculated since last initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoRouteTable		1.3.6.1.4.1.2.6.2.13.2.1.23
Table containing an entry for every Class of Service that it has calculated a route for.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNnTopoRouteEntry

ibmappnNnTopoRouteEntry		1.3.6.1.4.1.2.6.2.13.2.1.23.1
The Class of Service name is the index for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNnTopoRouteEntry

ibmappnNnTopoRouteCos		1.3.6.1.4.1.2.6.2.13.2.1.23.1.1
The Class of Service for the route.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmappnNnTopoRouteTrees		1.3.6.1.4.1.2.6.2.13.2.1.23.1.2
Number of routes tree caches built for this Class of Service since the last initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoRouteCalcs		1.3.6.1.4.1.2.6.2.13.2.1.23.1.3
Number of routes calculated since last initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnTopoRouteRejs		1.3.6.1.4.1.2.6.2.13.2.1.23.1.4
Number of route requests that could not be calculated since last initialization.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnNnAdjNodeTable		1.3.6.1.4.1.2.6.2.13.2.2
Table containing an entry for every node. The information kept in this table is the last FRSN sent and received, the status of the CP-CP sessions, and a gauge that indicates the number of outstanding TDUs.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNnAdjNodeEntry

ibmappnNnAdjNodeEntry		1.3.6.1.4.1.2.6.2.13.2.2.1
The adjacent node name is the index for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNnAdjNodeEntry

ibmappnNnAdjNodeAdjName		1.3.6.1.4.1.2.6.2.13.2.2.1.1
An administratively-assigned fully-qualified name of this node's adjacent network node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnNnAdjNodeCpCpSessStatus		1.3.6.1.4.1.2.6.2.13.2.2.1.2
Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Incative indicates no CP-CP sessions exists between this node and the adjacent node. Active indicates CP-CP sessons are active using both the ConWinner and ConLoser sessions. The session initiated by this node is refered to as the ConWinner session and is used by this node to send to the adjacent node. The ConLoserr session is initiated by the adjacent node and is used by this node to receive from the adjacent node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), conLoserActive(2), conWinnerActive(3), inactive(4)

ibmappnNnAdjNodeOutOfSeqTdus		1.3.6.1.4.1.2.6.2.13.2.2.1.3
Number of out of sequence Topology Database Updates (TDUs). In a quiesced state, this value is zero. In normal operation, the value varies depending on the network environment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnNnAdjNodeLastFrsnSent		1.3.6.1.4.1.2.6.2.13.2.2.1.4
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU sent to this adjacent node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmappnNnAdjNodeLastFrsnRcvd		1.3.6.1.4.1.2.6.2.13.2.2.1.5
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU received from this adjacent node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmappnNnTopologyTable		1.3.6.1.4.1.2.6.2.13.2.3.1
Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNnTopologyEntry

ibmappnNnTopologyEntry		1.3.6.1.4.1.2.6.2.13.2.3.1.1
The fully-qualified node name is used to index this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNnTopologyEntry

ibmappnNnNodeName		1.3.6.1.4.1.2.6.2.13.2.3.1.1.1
Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnNnNodeFrsn		1.3.6.1.4.1.2.6.2.13.2.3.1.1.2
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmappnNnNodeEntryTimeLeft		1.3.6.1.4.1.2.6.2.13.2.3.1.1.3
Number of days before deletion of this network node entry. Range is 0-31.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..31

ibmappnNnNodeType		1.3.6.1.4.1.2.6.2.13.2.3.1.1.4
Type of APPN node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	networknode(1), virtualnode(3)

ibmappnNnNodeRsn		1.3.6.1.4.1.2.6.2.13.2.3.1.1.5
Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNnNodeRouteAddResist		1.3.6.1.4.1.2.6.2.13.2.3.1.1.6
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNnNodeCongested		1.3.6.1.4.1.2.6.2.13.2.3.1.1.7
Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeIsrDepleted		1.3.6.1.4.1.2.6.2.13.2.3.1.1.8
Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeEndptDepleted		1.3.6.1.4.1.2.6.2.13.2.3.1.1.9
Indicates whether session endpoint resources are depleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeQuiescing		1.3.6.1.4.1.2.6.2.13.2.3.1.1.10
Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeGateway		1.3.6.1.4.1.2.6.2.13.2.3.1.1.11
Indicates whether the node provide gateway functions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeCentralDirectory		1.3.6.1.4.1.2.6.2.13.2.3.1.1.12
Indicates whether the node is central directory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeIsr		1.3.6.1.4.1.2.6.2.13.2.3.1.1.13
Indicates whether the node supports intermediate session routing (ISR).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeChainSupport		1.3.6.1.4.1.2.6.2.13.2.3.1.1.14
Indicates whether the node supports chaining.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnTgTopologyTable		1.3.6.1.4.1.2.6.2.13.2.3.2
Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNnTgTopologyEntry

ibmappnNnTgTopologyEntry		1.3.6.1.4.1.2.6.2.13.2.3.2.1
This table requires three indexes to provide a unique index. The indexes are the owning or originating CPname, the destination CPname, and the TG number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNnTgTopologyEntry

ibmappnNnTgOwner		1.3.6.1.4.1.2.6.2.13.2.3.2.1.1
Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnNnTgDest		1.3.6.1.4.1.2.6.2.13.2.3.2.1.2
Administratively-assigned fully-qualified network name for the destination node for this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnNnTgNum		1.3.6.1.4.1.2.6.2.13.2.3.2.1.3
Number associated with this transmission group. Range is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTgFrsn		1.3.6.1.4.1.2.6.2.13.2.3.2.1.4
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmappnNnTgEntryTimeLeft		1.3.6.1.4.1.2.6.2.13.2.3.2.1.5
Number of days before deletion of this network node TG entry. Range is 0-31.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..31

ibmappnNnTgDestVirtual		1.3.6.1.4.1.2.6.2.13.2.3.2.1.6
Indicates whether the destination node is a virtual node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnTgDlcData		1.3.6.1.4.1.2.6.2.13.2.3.2.1.7
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..9)

ibmappnNnTgRsn		1.3.6.1.4.1.2.6.2.13.2.3.2.1.8
Current owning node's resource sequence number for this resource.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNnTgOperational		1.3.6.1.4.1.2.6.2.13.2.3.2.1.9
Indicates whether the transmission group is operational.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnTgQuiescing		1.3.6.1.4.1.2.6.2.13.2.3.2.1.10
Indicates whether the transmission group is quiescing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnTgCpCpSession		1.3.6.1.4.1.2.6.2.13.2.3.2.1.11
Indicates whether CP-CP sessions are supported on this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnTgEffCap		1.3.6.1.4.1.2.6.2.13.2.3.2.1.12
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNnTgConnCost		1.3.6.1.4.1.2.6.2.13.2.3.2.1.13
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTgByteCost		1.3.6.1.4.1.2.6.2.13.2.3.2.1.14
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTgSecurity		1.3.6.1.4.1.2.6.2.13.2.3.2.1.15
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)

ibmappnNnTgDelay		1.3.6.1.4.1.2.6.2.13.2.3.2.1.16
Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)

ibmappnNnTgModemClass		1.3.6.1.4.1.2.6.2.13.2.3.2.1.17
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmappnNnTgUsr1		1.3.6.1.4.1.2.6.2.13.2.3.2.1.18
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTgUsr2		1.3.6.1.4.1.2.6.2.13.2.3.2.1.19
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTgUsr3		1.3.6.1.4.1.2.6.2.13.2.3.2.1.20
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTopologyFRTable		1.3.6.1.4.1.2.6.2.13.2.3.3
Portion of the APPN routing table that describes all of the APPN network nodes and virtual nodes known to this node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNnTopologyFREntry

ibmappnNnTopologyFREntry		1.3.6.1.4.1.2.6.2.13.2.3.3.1
The fully-qualified node name is used to index this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNnTopologyFREntry

ibmappnNnNodeFRName		1.3.6.1.4.1.2.6.2.13.2.3.3.1.1
Administratively-assigned network name that is locally defined at each network node in the format NETID.CPNAME.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnNnNodeFRFrsn		1.3.6.1.4.1.2.6.2.13.2.3.3.1.2
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmappnNnNodeFREntryTimeLeft		1.3.6.1.4.1.2.6.2.13.2.3.3.1.3
Number of days before deletion of this network node entry. Range is 0-31.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..31

ibmappnNnNodeFRType		1.3.6.1.4.1.2.6.2.13.2.3.3.1.4
Type of APPN node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	networknode(1), virtualnode(3)

ibmappnNnNodeFRRsn		1.3.6.1.4.1.2.6.2.13.2.3.3.1.5
Resource sequence number that is assigned and controlled by the network node that owns this resource. This is always an even 32-bit number unless an error has occurred.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNnNodeFRRouteAddResist		1.3.6.1.4.1.2.6.2.13.2.3.3.1.6
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNnNodeFRCongested		1.3.6.1.4.1.2.6.2.13.2.3.3.1.7
Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeFRIsrDepleted		1.3.6.1.4.1.2.6.2.13.2.3.3.1.8
Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeFREndptDepleted		1.3.6.1.4.1.2.6.2.13.2.3.3.1.9
Indicates whether session endpoint resources are depleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeFRQuiescing		1.3.6.1.4.1.2.6.2.13.2.3.3.1.10
Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeFRGateway		1.3.6.1.4.1.2.6.2.13.2.3.3.1.11
Indicates whether the node provide gateway functions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeFRCentralDirectory		1.3.6.1.4.1.2.6.2.13.2.3.3.1.12
Indicates whether the node is central directory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeFRIsr		1.3.6.1.4.1.2.6.2.13.2.3.3.1.13
Indicates whether the node supports intermediate session routing (ISR).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnNodeFRChainSupport		1.3.6.1.4.1.2.6.2.13.2.3.3.1.14
Indicates whether the node supports chaining.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnTgTopologyFRTable		1.3.6.1.4.1.2.6.2.13.2.3.4
Portion of the APPN topology database that describes all of the APPN transmissions groups used by the APPN network nodes.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnNnTgTopologyFREntry

ibmappnNnTgTopologyFREntry		1.3.6.1.4.1.2.6.2.13.2.3.4.1
This table is indexed by four columns: FRSN, TG owner fully-qualified node name, TG destination fully-qualified node name, TG number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnNnTgTopologyFREntry

ibmappnNnTgFROwner		1.3.6.1.4.1.2.6.2.13.2.3.4.1.1
Administratively-assigned name for the originating node for this TG. The format is NETID.CPNAME and is the same name specified in the node table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnNnTgFRDest		1.3.6.1.4.1.2.6.2.13.2.3.4.1.2
Administratively-assigned fully-qualified network name for the destination node for this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnNnTgFRNum		1.3.6.1.4.1.2.6.2.13.2.3.4.1.3
Number associated with this transmission group. Range is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTgFRFrsn		1.3.6.1.4.1.2.6.2.13.2.3.4.1.4
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmappnNnTgFREntryTimeLeft		1.3.6.1.4.1.2.6.2.13.2.3.4.1.5
Number of days before deletion of this network node TG entry. Range is 0-31.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..31

ibmappnNnTgFRDestVirtual		1.3.6.1.4.1.2.6.2.13.2.3.4.1.6
Indicates whether the destination node is a virtual node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnTgFRDlcData		1.3.6.1.4.1.2.6.2.13.2.3.4.1.7
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..9)

ibmappnNnTgFRRsn		1.3.6.1.4.1.2.6.2.13.2.3.4.1.8
Current owning node's resource sequence number for this resource.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNnTgFROperational		1.3.6.1.4.1.2.6.2.13.2.3.4.1.9
Indicates whether the transmission group is operational.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnTgFRQuiescing		1.3.6.1.4.1.2.6.2.13.2.3.4.1.10
Indicates whether the transmission group is quiescing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnTgFRCpCpSession		1.3.6.1.4.1.2.6.2.13.2.3.4.1.11
Indicates whether CP-CP sessions are supported on this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnNnTgFREffCap		1.3.6.1.4.1.2.6.2.13.2.3.4.1.12
The effective capacity is an integer value that indicates the kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnNnTgFRConnCost		1.3.6.1.4.1.2.6.2.13.2.3.4.1.13
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255, which indicates maximum cost. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTgFRByteCost		1.3.6.1.4.1.2.6.2.13.2.3.4.1.14
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTgFRSecurity		1.3.6.1.4.1.2.6.2.13.2.3.4.1.15
The security is represented as an integer with a range of 1 thru 255 with the most common values enumerated as defined above. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)

ibmappnNnTgFRDelay		1.3.6.1.4.1.2.6.2.13.2.3.4.1.16
Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)

ibmappnNnTgFRModemClass		1.3.6.1.4.1.2.6.2.13.2.3.4.1.17
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector; for a non-connection network it is X'00'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmappnNnTgFRUsr1		1.3.6.1.4.1.2.6.2.13.2.3.4.1.18
First user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTgFRUsr2		1.3.6.1.4.1.2.6.2.13.2.3.4.1.19
Second user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnNnTgFRUsr3		1.3.6.1.4.1.2.6.2.13.2.3.4.1.20
Third user-defined TG characteristic for this TG with a range of 0-255. This is an administratively assigned value associated with this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnLocalTopology		1.3.6.1.4.1.2.6.2.13.3
OBJECT IDENTIFIER

ibmappnLocalThisNode		1.3.6.1.4.1.2.6.2.13.3.1
OBJECT IDENTIFIER

ibmappnLocalGeneral		1.3.6.1.4.1.2.6.2.13.3.1.1
OBJECT IDENTIFIER

ibmappnLocalNnSpecific		1.3.6.1.4.1.2.6.2.13.3.1.2
OBJECT IDENTIFIER

ibmappnLocalTg		1.3.6.1.4.1.2.6.2.13.3.1.3
OBJECT IDENTIFIER

ibmappnLocalEnTopology		1.3.6.1.4.1.2.6.2.13.3.2
OBJECT IDENTIFIER

ibmappnLocalNodeName		1.3.6.1.4.1.2.6.2.13.3.1.1.1
Administratively-assigned fully-qualified name for this node. Format is NETID.CPNAME.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnLocalNodeType		1.3.6.1.4.1.2.6.2.13.3.1.1.2
Type of APPN node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	networknode(1), endnode(2), len(4)

ibmappnLocalNnRsn		1.3.6.1.4.1.2.6.2.13.3.1.2.1
Resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has occurred.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnLocalNnRouteAddResist		1.3.6.1.4.1.2.6.2.13.3.1.2.2
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnLocalNnCongested		1.3.6.1.4.1.2.6.2.13.3.1.2.3
Indicates whether this node is congested. Other network nodes stop routing traffic to this node while this flag is on.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalNnIsrDepleted		1.3.6.1.4.1.2.6.2.13.3.1.2.4
Indicate whether intermediated session routing resources are depleted. Other network nodes stop routing traffic through this node while this flag is on.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalNnEndptDepleted		1.3.6.1.4.1.2.6.2.13.3.1.2.5
Indicates whether session endpoint resources are depleted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalNnQuiescing		1.3.6.1.4.1.2.6.2.13.3.1.2.6
Indicates whether the node is quiescing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalNnGateway		1.3.6.1.4.1.2.6.2.13.3.1.2.7
Indicates whether the node is a gateway.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalNnCentralDirectory		1.3.6.1.4.1.2.6.2.13.3.1.2.8
Indicates whether the node is a central directory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalNnIsr		1.3.6.1.4.1.2.6.2.13.3.1.2.9
Indicates whether the node supports intermediate session routing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalNnChainSupport		1.3.6.1.4.1.2.6.2.13.3.1.2.10
Indicates whether the node supports chaining.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalNnFrsn		1.3.6.1.4.1.2.6.2.13.3.1.2.11
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update to adjacent network nodes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnLocalTgTable		1.3.6.1.4.1.2.6.2.13.3.1.3.1
TG Table describes all of the TGs owned by this node. The TG destination can be a virtual node, network node, len, or end node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnLocalTgEntry

ibmappnLocalTgEntry		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1
This table is indexed by the destination CPname and the TG number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnLocalTgEntry

ibmappnLocalTgDest		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.1
Administratively-assigned name for the destination node for this TG. This is the fully-qualified network node name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnLocalTgNum		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.2
Number associated with this transmission group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnLocalTgDestVirtual		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.3
Indicates whether the destination node is a Virtual node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalTgDlcData		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.4
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..9)

ibmappnLocalTgRsn		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.5
The resource sequence number is assigned and controlled by the network node that owns this resource. This is always an even unsigned number unless an error has occurred.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnLocalTgQuiescing		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.6
Indicates whether the Transmission Group is quiescing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalTgOperational		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.7
Indicates whether the Transmission Group is operational.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalTgCpCpSession		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.8
Indicates whether the CP-CP Sessions are supported on this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalTgEffCap		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.9
The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnLocalTgConnCost		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.10
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnLocalTgByteCost		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.11
Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnLocalTgSecurity		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.12
Security level for this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)

ibmappnLocalTgDelay		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.13
Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)

ibmappnLocalTgModemClass		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.14
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non-connection network it is zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnLocalTgUsr1		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.15
Value of the first user-defined TG characteristic for this TG. Range is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnLocalTgUsr2		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.16
Value of the second user-defined TG characteristic for this TG. Range is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnLocalTgUsr3		1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.17
Value of the third user-defined TG characteristic for this TG. Range is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnLocalEnTable		1.3.6.1.4.1.2.6.2.13.3.2.1
Portion of the APPN topology database that describes the end nodes known to this node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnLocalEnEntry

ibmappnLocalEnEntry		1.3.6.1.4.1.2.6.2.13.3.2.1.1
This table is indexed by the end node CPname.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnLocalEnEntry

ibmappnLocalEnName		1.3.6.1.4.1.2.6.2.13.3.2.1.1.1
Administratively-assigned fully-qualified name of end node in the format NETID.CPNAME.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnLocalEnEntryTimeLeft		1.3.6.1.4.1.2.6.2.13.3.2.1.1.2
Number of days before deletion of this end node entry. Range is 0-31.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..31

ibmappnLocalEnType		1.3.6.1.4.1.2.6.2.13.3.2.1.1.3
Type of APPN node (must always be a len or end node).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	endnode(2), len(4)

ibmappnLocalEnTgTable		1.3.6.1.4.1.2.6.2.13.3.2.2
Table describing all of the TGs owned by the end nodes known to this node. The TG destination can be a virtual node, network node, or end node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnLocalEnTgEntry

ibmappnLocalEnTgEntry		1.3.6.1.4.1.2.6.2.13.3.2.2.1
This table requires multiple indexes to uniquely identify each TG. They are originating CPname, destination CPname, and the TG number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnLocalEnTgEntry

ibmappnLocalEnTgOrigin		1.3.6.1.4.1.2.6.2.13.3.2.2.1.1
Administratively-assigned name for the origination node for this TG. This is the fully-qualified network name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnLocalEnTgDest		1.3.6.1.4.1.2.6.2.13.3.2.2.1.2
Administratively-assigned name for the destination node for this TG. This is the fully-qualified network name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnLocalEnTgNum		1.3.6.1.4.1.2.6.2.13.3.2.2.1.3
Number associated with this transmission group.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnLocalEnTgEntryTimeLeft		1.3.6.1.4.1.2.6.2.13.3.2.2.1.4
Number of days before deletion of this end node TG entry. Range is 0-31.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..31

ibmappnLocalEnTgDestVirtual		1.3.6.1.4.1.2.6.2.13.3.2.2.1.5
Indicates whether the destination node is a virtual node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalEnTgDlcData		1.3.6.1.4.1.2.6.2.13.3.2.2.1.6
DLC specific data related to the link connection network. Token-Ring - MAC/SAP X.25 Switched - dial digits X.21 Switched - dial digits Circuit Swtch - dial digits
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmappnLocalEnTgOperational		1.3.6.1.4.1.2.6.2.13.3.2.2.1.7
Indicates whether the Transmission Group is operational.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalEnTgCpCpSession		1.3.6.1.4.1.2.6.2.13.3.2.2.1.8
Indicates whether CP-CP sessions are supported on this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnLocalEnTgEffCap		1.3.6.1.4.1.2.6.2.13.3.2.2.1.9
The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnLocalEnTgConnCost		1.3.6.1.4.1.2.6.2.13.3.2.2.1.10
Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnLocalEnTgByteCost		1.3.6.1.4.1.2.6.2.13.3.2.2.1.11
Relative cost of transmitting a byte over this link. Range is from 0, which means no cost, to 255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnLocalEnTgSecurity		1.3.6.1.4.1.2.6.2.13.3.2.2.1.12
Security level for this TG.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)

ibmappnLocalEnTgDelay		1.3.6.1.4.1.2.6.2.13.3.2.2.1.13
Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with some of the more common values enumerated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)

ibmappnLocalEnTgModemClass		1.3.6.1.4.1.2.6.2.13.3.2.2.1.14
This is used to have multiple images for a connection network. For a connection network it is the same as in the TG vector and for a non connection network it is zero.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

ibmappnLocalEnTgUsr1		1.3.6.1.4.1.2.6.2.13.3.2.2.1.15
First user-defined TG characteristic for this TG. Range of values is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnLocalEnTgUsr2		1.3.6.1.4.1.2.6.2.13.3.2.2.1.16
Second user-defined TG characteristic for this TG. Range of values is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnLocalEnTgUsr3		1.3.6.1.4.1.2.6.2.13.3.2.2.1.17
Third user-defined TG characteristic for this TG. Range of values is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnDir		1.3.6.1.4.1.2.6.2.13.5
OBJECT IDENTIFIER

ibmappnDirPerf		1.3.6.1.4.1.2.6.2.13.5.1
OBJECT IDENTIFIER

ibmappnDirMaxCaches		1.3.6.1.4.1.2.6.2.13.5.1.1
Maximum number of cache entries allowed. This is an administratively assigned value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnDirCurCaches		1.3.6.1.4.1.2.6.2.13.5.1.2
Current number of cache entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnDirCurHomeEntries		1.3.6.1.4.1.2.6.2.13.5.1.3
Current number of home entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnDirRegEntries		1.3.6.1.4.1.2.6.2.13.5.1.4
Current number of registered entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnDirInLocates		1.3.6.1.4.1.2.6.2.13.5.1.5
Number of directed locates received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnDirInBcastLocates		1.3.6.1.4.1.2.6.2.13.5.1.6
Number of broadcast locates received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnDirOutLocates		1.3.6.1.4.1.2.6.2.13.5.1.7
Number of directed locates sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnDirOutBcastLocates		1.3.6.1.4.1.2.6.2.13.5.1.8
Number of broadcast locates sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnDirNotFoundLocates		1.3.6.1.4.1.2.6.2.13.5.1.9
Number of directed locates returned with a 'not found'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnDirNotFoundBcastLocates		1.3.6.1.4.1.2.6.2.13.5.1.10
Number of broadcast locates returned with a not found.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnDirLocateOutstands		1.3.6.1.4.1.2.6.2.13.5.1.11
Current number of outstanding locates, both directed and broadcast. This value varies. A value of zero indicates that no locates are unanswered.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnDirTable		1.3.6.1.4.1.2.6.2.13.5.2
Table containing information about all known LUs and TPs.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnDirEntry

ibmappnDirEntry		1.3.6.1.4.1.2.6.2.13.5.2.1
This table is indexed by the LU name.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnDirEntry

ibmappnDirLuName		1.3.6.1.4.1.2.6.2.13.5.2.1.1
Fully-qualified network LU name in the domain of the serving network node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnDirServerName		1.3.6.1.4.1.2.6.2.13.5.2.1.2
Fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully-qualified name is returned.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnDirLuOwnerName		1.3.6.1.4.1.2.6.2.13.5.2.1.3
Fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an unassociated end node. It is also the same as the fully-qualified LU name when this is the control point LU for this node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnDirLuLocation		1.3.6.1.4.1.2.6.2.13.5.2.1.4
Specifies the location of the LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	local(1), domain(2), xdomain(3)

ibmappnDirType		1.3.6.1.4.1.2.6.2.13.5.2.1.5
Directory types are: 1 - Home The LU is in the domain of the local network node and the LU information has been configured at the local node. 2 - Cache The LU has previously been located by a broadcast search and the location information has been saved. 3 - Register The LU is at an end node that is in the domain of the local network node. Registered entries are registered by the served end node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	home(1), cache(2), registered(3)

ibmappnDirWildCard		1.3.6.1.4.1.2.6.2.13.5.2.1.6
1 - Other means unknown type of LU entry. 2 - Expliced-entry means the full LUNAME will be used for locating this LU. 3 - Partial-wildcard means only the non-blank portions of the LUNAME will be used for locating this LU. 4 - Full-wildcard means all LUNAMES will be directed to this LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), explicit-entry(2), partial-wildcard(3), full-wildcard(4)

ibmappnCos		1.3.6.1.4.1.2.6.2.13.6
OBJECT IDENTIFIER

ibmappnCosModeTable		1.3.6.1.4.1.2.6.2.13.6.1
Table representing all of the defined mode names for this node. The table contains the matching COS name.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnCosModeEntry

ibmappnCosModeEntry		1.3.6.1.4.1.2.6.2.13.6.1.1
This table is indexed by the Mode Name.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnCosModeEntry

ibmappnCosModeName		1.3.6.1.4.1.2.6.2.13.6.1.1.1
Administratively-assigned name for this mode entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnCosModeCosName		1.3.6.1.4.1.2.6.2.13.6.1.1.2
An administratively assigned name for this Class of Service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnCosNameTable		1.3.6.1.4.1.2.6.2.13.6.2
Table representing all of the defined class-of-service names for this node. The COS node and TG tables are accessed using the same index, which is the COS name.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnCosNameEntry

ibmappnCosNameEntry		1.3.6.1.4.1.2.6.2.13.6.2.1
The COS name is the index to this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnCosNameEntry

ibmappnCosName		1.3.6.1.4.1.2.6.2.13.6.2.1.1
Administratively-assigned name for this class of service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnCosTransPriority		1.3.6.1.4.1.2.6.2.13.6.2.1.2
Transmission priority for this class of service. Values are: Low Medium High Network
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	low(1), medium(2), high(3), network(4)

ibmappnCosNodeRowTable		1.3.6.1.4.1.2.6.2.13.6.3
This table contains all node-row information for all class of service in this node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnCosNodeRowEntry

ibmappnCosNodeRowEntry		1.3.6.1.4.1.2.6.2.13.6.3.1
The COS name is the first index and a integer is the second index to insure a unique index.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnCosNodeRowEntry

ibmappnCosNodeRowName		1.3.6.1.4.1.2.6.2.13.6.3.1.1
Administratively-assigned name for this class of service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnCosNodeRowIndex		1.3.6.1.4.1.2.6.2.13.6.3.1.2
Index of COS name. This same value is used to access the node and TG COS tables. Range of values is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosNodeRowWgt		1.3.6.1.4.1.2.6.2.13.6.3.1.3
Weight to be associated with the nodes that fit the criteria specified by this node row.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmappnCosNodeRowResistMin		1.3.6.1.4.1.2.6.2.13.6.3.1.4
Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosNodeRowResistMax		1.3.6.1.4.1.2.6.2.13.6.3.1.5
Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosNodeRowMinCongestAllow		1.3.6.1.4.1.2.6.2.13.6.3.1.6
Indicates whether low congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnCosNodeRowMaxCongestAllow		1.3.6.1.4.1.2.6.2.13.6.3.1.7
Indicates whether high congestion will be tolerated. The minimum and maximum parameters will allow specifying either low-congested, high-congested, or either to be used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappnCosTgRowTable		1.3.6.1.4.1.2.6.2.13.6.4
Table containing all the Tg-row information for all class of service defined in this node.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnCosTgRowEntry

ibmappnCosTgRowEntry		1.3.6.1.4.1.2.6.2.13.6.4.1
The TgRowName and the TgRowIndex are the index for this table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnCosTgRowEntry

ibmappnCosTgRowName		1.3.6.1.4.1.2.6.2.13.6.4.1.1
Administratively-assigned name for this class of service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnCosTgRowIndex		1.3.6.1.4.1.2.6.2.13.6.4.1.2
Index of COS name. This same value is used to access the node and TG COS tables.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosTgRowWgt		1.3.6.1.4.1.2.6.2.13.6.4.1.3
Weight to be associated with the nodes that fit the criteria specified by this tg-row.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmappnCosTgRowEffCapMin		1.3.6.1.4.1.2.6.2.13.6.4.1.4
Minimum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnCosTgRowEffCapMax		1.3.6.1.4.1.2.6.2.13.6.4.1.5
Maximum acceptable speed for this Class of Service. The effective capacity is an integer value that indicates the actual kilo bits per second. It is derived from the link bandwidth and maximum load factor with the range of 0 thru 603,979,776.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnCosTgRowConnCostMin		1.3.6.1.4.1.2.6.2.13.6.4.1.6
Minimum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosTgRowConnCostMax		1.3.6.1.4.1.2.6.2.13.6.4.1.7
Maximum acceptable cost per connect time for this Class of Service. Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosTgRowByteCostMin		1.3.6.1.4.1.2.6.2.13.6.4.1.8
Minimum acceptable cost per byte for this Class of Service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosTgRowByteCostMax		1.3.6.1.4.1.2.6.2.13.6.4.1.9
Maximum acceptable cost per byte for this Class of Service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosTgRowSecurityMin		1.3.6.1.4.1.2.6.2.13.6.4.1.10
Minimum acceptable security for this Class of Service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)

ibmappnCosTgRowSecurityMax		1.3.6.1.4.1.2.6.2.13.6.4.1.11
Maximum acceptable security for this Class of Service.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)

ibmappnCosTgRowDelayMin		1.3.6.1.4.1.2.6.2.13.6.4.1.12
Minimum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with the more values enumerated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)

ibmappnCosTgRowDelayMax		1.3.6.1.4.1.2.6.2.13.6.4.1.13
Maximum acceptable propagation delay for this class of service. Relative amount of time that it takes for a signal to travel the length of the logical link. This time is represented in micro seconds, with the more values enumerated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	minimum(0), negligible(384), terrestrial(9216), packet(147456), long(294912), maximum(2013265920)

ibmappnCosTgRowUsr1Min		1.3.6.1.4.1.2.6.2.13.6.4.1.14
Minimum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosTgRowUsr1Max		1.3.6.1.4.1.2.6.2.13.6.4.1.15
Maximum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosTgRowUsr2Min		1.3.6.1.4.1.2.6.2.13.6.4.1.16
Minimum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosTgRowUsr2Max		1.3.6.1.4.1.2.6.2.13.6.4.1.17
A Maximum acceptable value for this user defined characteristic.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosTgRowUsr3Min		1.3.6.1.4.1.2.6.2.13.6.4.1.18
Minimum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnCosTgRowUsr3Max		1.3.6.1.4.1.2.6.2.13.6.4.1.19
Maximum acceptable value for this user defined characteristic. Range of values is 0-255.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

ibmappnSession		1.3.6.1.4.1.2.6.2.13.7
OBJECT IDENTIFIER

ibmappnConversation		1.3.6.1.4.1.2.6.2.13.8
OBJECT IDENTIFIER

ibmappnSessGeneral		1.3.6.1.4.1.2.6.2.13.7.1
OBJECT IDENTIFIER

ibmappnSessEndPoint		1.3.6.1.4.1.2.6.2.13.7.2
OBJECT IDENTIFIER

ibmappnSessIntermediate		1.3.6.1.4.1.2.6.2.13.7.3
OBJECT IDENTIFIER

ibmappnConvGeneral		1.3.6.1.4.1.2.6.2.13.8.1
OBJECT IDENTIFIER

ibmappnConvEndPoint		1.3.6.1.4.1.2.6.2.13.8.2
OBJECT IDENTIFIER

ibmappnIsInformation		1.3.6.1.4.1.2.6.2.13.7.3.1
OBJECT IDENTIFIER

ibmappnIsAccounting		1.3.6.1.4.1.2.6.2.13.7.3.2
OBJECT IDENTIFIER

ibmappnIsInGlobal		1.3.6.1.4.1.2.6.2.13.7.3.1.1
OBJECT IDENTIFIER

ibmappnIsInGlobeStatus		1.3.6.1.4.1.2.6.2.13.7.3.1.1.1
Indicates the current collection options in effect: 1. notActive: collection of counters and some names is not active. 2. active: collection of counters and some names is active.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	notActive(1), active(2)

ibmappnIsInGlobeRscv		1.3.6.1.4.1.2.6.2.13.7.3.1.1.2
Indicates the current collection options in effect: 1. notActive: collection of route selection control vectors is not active. 2. active: collection of route selection control vectors is active.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	notActive(1), active(2)

ibmappnIsInGlobeRscvTime		1.3.6.1.4.1.2.6.2.13.7.3.1.1.3
Time when the ibmappnIsInGlobeRscv object last changed. This time is in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsInGlobeCtrStatus		1.3.6.1.4.1.2.6.2.13.7.3.1.1.4
Indicates whether or not the intermediate session counters are active. This object reflects the combination of the ibmappnIsInGlobeStatus object and the ibmappnIsAcBtypeActive object. The values are: 1. notActive: collection of counters and some names is not active. 2. active: collection of counters and some names is active.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	notActive(1), active(2)

ibmappnIsInGlobeCtrStatusTime		1.3.6.1.4.1.2.6.2.13.7.3.1.1.5
Time when the ibmappnIsInGlobeCtrStatus object last changed. This time is in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsInTable		1.3.6.1.4.1.2.6.2.13.7.3.1.2
Intermediate Session Information Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnIsInEntry

ibmappnIsInEntry		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1
Entry of Intermediate Session Information Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnIsInEntry

ibmappnIsInFqLuName		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.1
The network-qualified CP name or PU name of the node at which the session and cid originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving the LEN node at which the origin LU is located. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnIsInPcid		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.2
The procedure correlation identifier (pcid) of a session. It is an 8-octet value assigned by the primary LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

ibmappnIsInPriLuName		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.3
The primary LU name of the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnIsInSecLuName		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.4
The secondary LU name of the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnIsInModeName		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.5
The Mode Name name used for this session. This is a 1-8 character name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnIsInCosName		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.6
The Class of Service (COS) name used for this session. This is a 1-8 character name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnIsInTransPriority		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.7
The transmission priority of this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsInSessType		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.8
The type of intermediate session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	lu62(1), lu0thru3(2)

ibmappnIsInSessState		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.9
Indicates the state of the session. 1. session is pending inactive or, 2. session is pending active or, 3. session is active or, 4. session is inactive Existing sessions can be deactivated by setting this object to inactive.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	inactive(1), pendactive(2), active(3), pendinact(4)

ibmappnIsInSessStartTime		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.10
Time when the session started in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsInSessUpTime		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.11
Length of time the session has been active in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsInCtrUpTime		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.12
Length of time the session counters have been active in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsInP2SFmdPius		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.13
Number of FMD PIUs sent from the Primary LU to the Secondary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsInS2PFmdPius		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.14
Number of FMD PIUs sent from the Secondary LU to the Primary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsInP2SNonFmdPius		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.15
Number of non-FMD PIUs sent from the Primary LU to the Secondary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsInS2PNonFmdPius		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.16
Number of non-FMD PIUs sent from the Secondary LU to the Primary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsInP2SFmdBytes		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.17
Number of FMD Bytes sent from the Primary LU to the Secondary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsInS2PFmdBytes		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.18
Number of FMD Bytes sent from the Secondary LU to the Primary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsInP2SNonFmdBytes		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.19
Number of non-FMD Bytes sent from the Primary LU to the Secondary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsInS2PNonFmdBytes		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.20
Number of non-FMD Bytes sent from the Secondary LU to the Primary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsInPsAdjCpName		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.21
The primary stage adjacent CP name of this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnIsInPsAdjTgNum		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.22
The primary stage adjacent transmission group (TG) number associated with this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsInPsSendMaxBtuSize		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.23
The primary stage maximum basic transmission size (BTU) for sending data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsInPsSendPacingType		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.24
The primary stage type of pacing being used for sending data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fixed(1), adaptive(2)

ibmappnIsInPsSendRpc		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.25
The primary stage send residual pace count. This represents the primary stage number of MU's that can still be sent in the current session window.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnIsInPsSendNxWndwSize		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.26
The primary stage size of the next window which will be used to send data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnIsInPsRecvPacingType		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.27
The primary stage type of pacing being used for receiving data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fixed(1), adaptive(2)

ibmappnIsInPsRecvRpc		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.28
The primary stage receive residual pace count. This represents the primary stage number of MU's that can still be received in the current session window.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnIsInPsRecvNxWndwSize		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.29
The primary stage size of the next window which will be used to receive data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnIsInSsAdjCpName		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.30
The secondary stage adjacent CP name of this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnIsInSsAdjTgNum		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.31
The secondary stage adjacent transmission group (TG) number associated with this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsInSsSendMaxBtuSize		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.32
The secondary stage maximum basic transmission size (BTU) for sending data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsInSsSendPacingType		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.33
The secondary stage type of pacing being used for sending data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fixed(1), adaptive(2)

ibmappnIsInSsSendRpc		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.34
The secondary stage send residual pace count. This represents the secondary stage number of MU's that can still be sent in the current session window.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnIsInSsSendNxWndwSize		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.35
The secondary stage size of the next window which will be used to send data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnIsInSsRecvPacingType		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.36
The secondary stage type of pacing being used for receiving data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	fixed(1), adaptive(2)

ibmappnIsInSsRecvRpc		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.37
The secondary stage send residual pace count. This represents the secondary stage number of MU's that can still be received in the current session window.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnIsInSsRecvNxWndwSize		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.38
The secondary stage size of the next window which will be used to receive data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnIsInRouteInfo		1.3.6.1.4.1.2.6.2.13.7.3.1.2.1.39
The route selection control vector (RSCV x'2B') used for this session. It is present for APPN nodes; but is not present for LEN nodes. The format of this vector is described in SNA Formats.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmappnIsAcGlobal		1.3.6.1.4.1.2.6.2.13.7.3.2.1
OBJECT IDENTIFIER

ibmappnIsAcGlobeStatus		1.3.6.1.4.1.2.6.2.13.7.3.2.1.1
This object indicates the current status for accounting type. 1. indicates collection is not active for any media type. 2. indicates collection is active for at least one media type; and that media is not full. 3. indicates collection is active for at least one media type; but all active medias are full.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notActive(1), activeNotFull(2), activeButFull(3)

ibmappnIsAcGlobeByteThresh		1.3.6.1.4.1.2.6.2.13.7.3.2.1.2
The byte threshold for recording accounting information for an active session. If the total of the byte counters (FmdBytes and NonFmdBtyes) is an even multiple of this non-zero value, statistics for this session will be recorded to all active buffers. A value of zero indicates that no byte threshold has been set.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcGlobeCheckPt		1.3.6.1.4.1.2.6.2.13.7.3.2.1.3
By setting this value to yes, the agent will collect accounting information for all active sessions. This information will be recorded to all active buffers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ready(1), yes(2)

ibmappnIsAcGlobeMgrUtcSecs		1.3.6.1.4.1.2.6.2.13.7.3.2.1.4
The managers Coordinated Universal Time (UTC) seconds. It contains an integer from 0 to 59. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcGlobeMgrUtcMins		1.3.6.1.4.1.2.6.2.13.7.3.2.1.5
The managers Coordinated Universal Time (UTC) minutes. It contains an integer from 0 to 59. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcGlobeMgrUtcHours		1.3.6.1.4.1.2.6.2.13.7.3.2.1.6
The managers Coordinated Universal Time (UTC) hours. It contains an integer from 0 to 23. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcGlobeMgrUtcMdays		1.3.6.1.4.1.2.6.2.13.7.3.2.1.7
The managers Coordinated Universal Time (UTC) day of the month. It contains an integer from 1 to 31; or 0 if the manager has not set this object. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcGlobeMgrUtcMonths		1.3.6.1.4.1.2.6.2.13.7.3.2.1.8
The managers Coordinated Universal Time (UTC) months since January. It contains an integer from 0 to 11. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	january(0), february(1), march(2), april(3), may(4), june(5), july(6), august(7), september(8), october(9), november(10), december(11)

ibmappnIsAcGlobeMgrUtcYears		1.3.6.1.4.1.2.6.2.13.7.3.2.1.9
The managers Coordinated Universal Time (UTC) years since 1900. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcGlobeMgrUtcWdays		1.3.6.1.4.1.2.6.2.13.7.3.2.1.10
The managers Coordinated Universal Time (UTC) days since Sunday. It contains an integer from 0 to 6. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6)

ibmappnIsAcGlobeMgrUtcYdays		1.3.6.1.4.1.2.6.2.13.7.3.2.1.11
The managers Coordinated Universal Time (UTC) days since January 1. It contains an integer from 0 to 365. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcGlobeMgrUtcIsdst		1.3.6.1.4.1.2.6.2.13.7.3.2.1.12
The managers Coordinated Universal Time (UTC) daylight saving time flag. It is positive if daylight saving time is in effect. It is zero if daylight saving time is not in effect. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcGlobeMgrName		1.3.6.1.4.1.2.6.2.13.7.3.2.1.13
The name of the manager who set the manager UTC times or NULL if the manager name has not been set. It contains: a. the network id of the manager, b. a period (.) c. the cp name of the manager. By setting this value, the agent will create time record with its corresponding time and name. When setting this object, the manager should also set all other ibmappnIsAcGlobeMgr objects with the same SET operation.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnIsAcBtypeTable		1.3.6.1.4.1.2.6.2.13.7.3.2.2
Intermediate Session Accounting Buffer Type Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnIsAcBtypeEntry

ibmappnIsAcBtypeEntry		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1
Entry of Intermediate Session Accounting Buffer Type Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnIsAcBtypeEntry

ibmappnIsAcBtypeMedia		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.1
The media for storing the intermediate session accounting records.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	memory(1), dasd(2)

ibmappnIsAcBtypeActive		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.2
Indicates whether or not the buffer media is active. 1. no: indicates the buffer media is not currently used for recording. 2. yes: indicates the buffer media is currently being used for recording.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

ibmappnIsAcBtypeDirName		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.3
The name of the directory which will be used to allocate and write buffers of this type. For memory buffer types, this field will be NULL.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmappnIsAcBtypePrdMaxBufs		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.4
The maximum number of buffer medias supported by the product.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeMaxBufs		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.5
The maximum number of buffer medias which will be used for recording accounting information. This value must be in the range of zero to the Product Maximum.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeCurBufs		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.6
The current number of buffer media. This is the sum of all full and in use buffers of this type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappnIsAcBtypePrdRecPerBuf		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.7
The maximum number of records supported by the product.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeRecPerBuf		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.8
The maximum number of records which will be recorded in an individual buffer. This value must be in the range of zero to the Product Maximum.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeRecFormat		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.9
This defines the recording format of records. (1) ascii: records are recorded in ascii (english text format) (2) binary: records are recorded in binary (machine readable format)
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ascii(1), binary(2)

ibmappnIsAcBtypeFullAction		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.10
This defines the behaviour used when all buffer medias are full. (1) halt: stop creating new records (2) wrap: overwrite the existing records.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	halt(1), wrap(2)

ibmappnIsAcBtypeFullTime		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.11
The time which the full condition was encountered. This time is represented in hundreds of a second since the node was started. 2**32-1 (4,294,967,295), and wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsAcBtypeFullReason		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.12
The reason the buffer media is full. (1) The media is not full. (2) The maximum number of buffers have been reach, all buffers are full and the full action is halt. (3) The maximum number of buffers is zero or the maximum number of records is less than 5 or a unique record number cannot be generated. (4) Unable to write to the media due to I/O errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notFull(1), physicallyFull(2), logicallyFull(3), ioErrors(4)

ibmappnIsAcBtypeFullWraps		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.13
The number of accounting records being overwritten due to buffer full situation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeFullLosts		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.14
The number of new accounting records lost due to the buffer full situation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeErrorWraps		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.15
The number of accounting records lost to due to other reasons, (e.g. I/O error, software error) while in a wrap condition.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeErrorLosts		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.16
The number of accounting records lost to due to other reasons, (e.g. I/O error, software error) while not in a full condition.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeCheckPts		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.17
The number of times a buffer of this type has been recorded to for checkpointing active intermediate sessions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypePurges		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.18
The number of times a buffer of this type has been purged.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeDeletes		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.19
The number of times an entry has been deleted from a buffer of this type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeResets		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.20
The number of times the Btype counters have been reset as a result of a SET.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBtypeClearStats		1.3.6.1.4.1.2.6.2.13.7.3.2.2.1.21
By setting this object to yes, all statistics for this media type will be cleared (set to zero); and the Btype reset counter will be incremented. Objects affected by this include: - ibmappnIsAcBtypeFullTime - ibmappnIsAcBtypeFullReason - ibmappnIsAcBtypeFullWraps - ibmappnIsAcBtypeFullLosts - ibmappnIsAcBtypeErrorWraps - ibmappnIsAcBtypeErrorLosts - ibmappnIsAcBtypeCheckPts - ibmappnIsAcBtypePurges - ibmappnIsAcBtypeDeletes
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ready(1), yes(2)

ibmappnIsAcBufTable		1.3.6.1.4.1.2.6.2.13.7.3.2.3
Intermediate Session Accounting Buffer Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnIsAcBufEntry

ibmappnIsAcBufEntry		1.3.6.1.4.1.2.6.2.13.7.3.2.3.1
Entry of Intermediate Session Accounting Buffer Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnIsAcBufEntry

ibmappnIsAcBufMedia		1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.1
The media for storing the intermediate session accounting records.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	memory(1), dasd(2)

ibmappnIsAcBufNumber		1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.2
Number of the buffer. Each time a new buffer is used for recording, an incremented number will be assigned. Thus, the order of in which the buffers filled can be determined.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBufState		1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.3
The current buffer state. 1. complete: indicates the buffer is full or recording is not active for this buffer. In either case, the buffer is ready to be retrieved. This value may be specified in a SET operation to change a buffers state from active to complete. 2. active: indicates the buffer is currently being used for recording. This value is not valid for use in a SET operation. 3. purge: indicates the buffer should be purged. This value may be specified in a SET operation to remove a buffer. Specification of this value is only valid for complete buffers. It is not valid for active buffers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	complete(1), active(2), purge(3)

ibmappnIsAcBufRecFormat		1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.4
This defines the recording format of records. (1) ascii: records are recorded in ascii (english text format) (2) binary: records are recorded in binary (machine readable format)
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ascii(1), binary(2)

ibmappnIsAcBufMaxRecords		1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.5
The maximum number of records this buffer may contain. It is derived from the number of records per buffer set in the buffer type table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBufOldestIndex		1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.6
The oldest accounting index contained in this buffer. By setting this object, all records with indexes less than this value will be deleted. The set value must be greater than or equal to the current oldest index and less than or equal to the current newest index. Setting of this object will not be honored for all types of buffers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ibmappnIsAcBufNewestIndex		1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.7
The newest accounting index contained in this buffer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcBufName		1.3.6.1.4.1.2.6.2.13.7.3.2.3.1.8
The name of the buffer.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

ibmappnIsAcTimeTable		1.3.6.1.4.1.2.6.2.13.7.3.2.4
Intermediate Session Accounting Time Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnIsAcTimeEntry

ibmappnIsAcTimeEntry		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1
Entry of Intermediate Session Accounting Time Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnIsAcTimeEntry

ibmappnIsAcTimeIndex		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.1
Intermediate Session Time record index. It starts with 0, and increase up to maximum value of 2**31-1 (2,147,483,647), and wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeEntryType		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.2
Indicates whether the entry was made as the result of: 1. a SET to start collecting accounting data, or 2. a SET to stop collecting accounting data, or 3. the creation of a new media to store accounting data, or 4. a media was full and wrapped (over writing records), or 5. the system time changed, or 6. a manager set the manager times and/or manager name, or 7. the record format for this media changed, or 8. time reference for the media
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	startCollection(1), endCollection(2), createdMedia(3), wrappedMedia(4), timeChange(5), managerSetTime(6), recordFormatChanged(7), timeReference(8)

ibmappnIsAcTimeForMedia		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.3
This object qualifies the time entry type. It indicates the media type for which the entry occured.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	memoryMedia(1), dasdMedia(2), allMedias(99)

ibmappnIsAcTimeRecTime		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.4
Intermediate Session Record time. It represents the time in hundreds of a second since the node was started. 2**32-1 (4,294,967,295), and wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsAcTimeAgtUtcSecs		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.5
The agents Coordinated Universal Time (UTC) seconds. It contains an integer from 0 to 59.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeAgtUtcMins		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.6
The agents Coordinated Universal Time (UTC) minutes. It contains an integer from 0 to 59.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeAgtUtcHours		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.7
The agents Coordinated Universal Time (UTC) hours. It contains an integer from 0 to 23.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeAgtUtcMdays		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.8
The agents Coordinated Universal Time (UTC) day of the month. It contains an integer from 1 to 31.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeAgtUtcMonths		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.9
The agents Coordinated Universal Time (UTC) months since January. It contains an integer from 0 to 11.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	january(0), february(1), march(2), april(3), may(4), june(5), july(6), august(7), september(8), october(9), november(10), december(11)

ibmappnIsAcTimeAgtUtcYears		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.10
The agents Coordinated Universal Time (UTC) years since 1900.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeAgtUtcWdays		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.11
The agents Coordinated Universal Time (UTC) days since Sunday. It contains an integer from 0 to 6.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6)

ibmappnIsAcTimeAgtUtcYdays		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.12
The agents Coordinated Universal Time (UTC) days since January 1. It contains an integer from 0 to 365.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeAgtUtcIsdst		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.13
The agents Coordinated Universal Time (UTC) daylight saving time flag. It is positive if daylight saving time is in effect. It is zero if daylight saving time is not in effect.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeAgtName		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.14
The name of the agent who set the agent UTC times. It contains: a. the network id of the agent, b. a period (.) c. the cp name of the agent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnIsAcTimeMgrUtcSecs		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.15
The managers Coordinated Universal Time (UTC) seconds. It contains an integer from 0 to 59.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeMgrUtcMins		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.16
The managers Coordinated Universal Time (UTC) minutes. It contains an integer from 0 to 59.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeMgrUtcHours		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.17
The managers Coordinated Universal Time (UTC) hours. It contains an integer from 0 to 23.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeMgrUtcMdays		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.18
The managers Coordinated Universal Time (UTC) day of the month. It contains an integer from 1 to 31; or 0 if the manager has not set this object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeMgrUtcMonths		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.19
The managers Coordinated Universal Time (UTC) months since January. It contains an integer from 0 to 11.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	january(0), february(1), march(2), april(3), may(4), june(5), july(6), august(7), september(8), october(9), november(10), december(11)

ibmappnIsAcTimeMgrUtcYears		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.20
The managers Coordinated Universal Time (UTC) years since 1900.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeMgrUtcWdays		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.21
The managers Coordinated Universal Time (UTC) days since Sunday. It contains an integer from 0 to 6.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6)

ibmappnIsAcTimeMgrUtcYdays		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.22
The managers Coordinated Universal Time (UTC) days since January 1. It contains an integer from 0 to 365.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeMgrUtcIsdst		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.23
The managers Coordinated Universal Time (UTC) daylight saving time flag. It is positive if daylight saving time is in effect. It is zero if daylight saving time is not in effect.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcTimeMgrName		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.24
The name of the manager who set the manager UTC times or NULL if the manager name has not been set. It contains: a. the network id of the manager, b. a period (.) c. the cp name of the manager.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..17)

ibmappnIsAcTimeMgrTimeValid		1.3.6.1.4.1.2.6.2.13.7.3.2.4.1.25
This indicates whether or not the the manager UTC times are valid. It is set by the manager if the manager determines the manager UTC times are valid.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	notvalid(1), valid(2)

ibmappnIsAcDataTable		1.3.6.1.4.1.2.6.2.13.7.3.2.5
Intermediate Session Accounting Data Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappnIsAcDataEntry

ibmappnIsAcDataEntry		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1
Entry of Intermediate Session Accounting Data Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappnIsAcDataEntry

ibmappnIsAcIndex		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.1
Session accounting record index. Upon initial startup, it will begin with 0, and increase up to maximum value of 2**31-1 (2,147,483,647), and wraps. Upon subsequent startups, it will be initialized with the value of the oldest index in any media type; or 0 if no indices are found.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappnIsAcEntryType		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.2
Indicates whether the entry was made as the result of: 1. a session starting or, 2. a session ending or, 3. a session threshold reached or 4. a session checkpoint request
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	startEntry(1), endEntry(2), thresholdEntry(3), checkpointEntry(4)

ibmappnIsAcRecTime		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.3
Intermediate Session Record time. It represents the time in hundreds of a second since the node was started. 2**32-1 (4,294,967,295), and wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsAcFqLuName		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.4
The network-qualified CP name or PU name of the node at which the session and pcid originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving the LEN node at which the origin LU is located. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnIsAcPcid		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.5
The procedure correlation identifier (pcid) of a session. It is an 8-octet value assigned by the primary LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

ibmappnIsAcPriLuName		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.6
Primary LU Name of the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnIsAcSecLuName		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.7
Secondary LU Name of the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappnIsAcModeName		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.8
The mode name used for this session
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnIsAcCosName		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.9
The class of service (cos) used for this session
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappnIsAcTransPriority		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.10
Transmission priority for this session. The values are: 1. Low 2. Medium 3. High 4. Network
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	low(1), medium(2), high(3), network(4)

ibmappnIsAcSessType		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.11
The type of intermediate session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	lu62(1), lu0thru3(2)

ibmappnIsAcSessState		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.12
Indicates the state of the session. 1. session is pending inactive or, 2. session is pending active or, 3. session is active or, 4. session is inactive
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), pendactive(2), active(3), pendinact(4)

ibmappnIsAcSessStartTime		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.13
Time when the session started in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsAcSessUpTime		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.14
Length of time the session has been active in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsAcCtrUpTime		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.15
Length of time the session counters have been active in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappnIsAcEndReason		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.16
The SNA sense code which resulted when the session ended.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

ibmappnIsAcP2SFmdPius		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.17
The number of FMD PIU's sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsAcS2PFmdPius		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.18
The number of FMD PIU's sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsAcP2SNonFmdPius		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.19
The number of non-FMD PIU's sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsAcS2PNonFmdPius		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.20
The number of non-FMD PIU's sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsAcP2SFmdBytes		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.21
The number of FMD bytes sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsAcS2PFmdBytes		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.22
The number of FMD bytes sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsAcP2SNonFmdBytes		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.23
The number of non-FMD bytes sent from the primary LU to the secondary LU. The counter has a range of of 0 to 2**32; and then wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsAcS2PNonFmdBytes		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.24
The number of non-FMD bytes sent from the secondary LU to the primary LU. The counter has a range of of 0 to 2**32; and then wraps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappnIsAcRouteInfo		1.3.6.1.4.1.2.6.2.13.7.3.2.5.1.25
The route selection control vector (RSCV x'2B') used for this session. It is present for APPN nodes; but is not present for LEN nodes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmappcInformation		1.3.6.1.4.1.2.6.2.13.7.2.1
OBJECT IDENTIFIER

ibmappcInGlobal		1.3.6.1.4.1.2.6.2.13.7.2.1.1
OBJECT IDENTIFIER

ibmappcInGlobeStatus		1.3.6.1.4.1.2.6.2.13.7.2.1.1.1
Indicates the current collection options in effect: 1. notActive: collection of counters and some names is not active. 2. active: collection of counters and some names is active.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	notActive(1), active(2)

ibmappcInGlobeRscv		1.3.6.1.4.1.2.6.2.13.7.2.1.1.2
Indicates the current collection options in effect: 1. notActive: collection of route selection control vectors is not active. 2. active: collection of route selection control vectors is active.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	notActive(1), active(2)

ibmappcInGlobeRscvTime		1.3.6.1.4.1.2.6.2.13.7.2.1.1.3
Time when the ibmappcInGlobeRscv object last changed. This time is in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappcInGlobeCtrStatus		1.3.6.1.4.1.2.6.2.13.7.2.1.1.4
Indicates whether or not the appc session counters are active. This object reflects the combination of the ibmappcInGlobeStatus object and any other product dependant object(s). The values are: 1. notActive: collection of counters and some names is not active. 2. active: collection of counters and some names is active.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	notActive(1), active(2)

ibmappcInGlobeCtrStatusTime		1.3.6.1.4.1.2.6.2.13.7.2.1.1.5
Time when the ibmappcInGlobeCtrStatus object last changed. This time is in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappcInGlobeActSess		1.3.6.1.4.1.2.6.2.13.7.2.1.1.6
Number of currently active APPC sessions
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInLluTable		1.3.6.1.4.1.2.6.2.13.7.2.1.2
APPC Local Lu Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappcInLluEntry

ibmappcInLluEntry		1.3.6.1.4.1.2.6.2.13.7.2.1.2.1
Entry of APPC Local Lu Information Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappcInLluEntry

ibmappcInLluLuName		1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.1
The network-qualified LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInLluDefType		1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.2
Indicates whether the LU definition was specified in the nodes system definitions or was dynamically created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sysdef(1), dynamic(2)

ibmappcInLluSessLimit		1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.3
The maximum number of session supported by this LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInLluBindRspMayQ		1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.4
Indicates whether or not a received bind response will be queued if the LU is not currently active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLluDefaultLu		1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.5
Indicates whether the LU is the default LU for the node.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLluCntlPtLu		1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.6
Indicates whether or not the LU is the control point (CP) LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLluCurActSess		1.3.6.1.4.1.2.6.2.13.7.2.1.2.1.7
The number of currently active sessions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInRluTable		1.3.6.1.4.1.2.6.2.13.7.2.1.3
APPC Remote Partner Lu Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappcInRluEntry

ibmappcInRluEntry		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1
Entry of APPC Remote Partner Lu Information Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappcInRluEntry

ibmappcInRluLocLuName		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.1
The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInRluParLuName		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.2
The network-qualified partner LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInRluParLuLocName		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.3
The network-qualified partner LU local name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInRluDefType		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.4
Indicates whether the LU definition was specified in the nodes system definitions or was dynamically created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sysdef(1), dynamic(2)

ibmappcInRluDefParaSessSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.5
Defined Parallel Sessions Supported. Indicates whether or not multiple session between the partner LU and its associated local LU are permitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInRluDefCnosSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.6
Defined CNOS Supported. Indicates whether or not Change Number of Sessions (CNOS) will be used to negotiate session limits between the logical points.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInRluDefAllVerSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.7
Defined Already Verified Accepted. Indicates whether or not an attach, specifying that TP security has already been verified, is accepted by the adjacent CP LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInRluDefAttSecSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.8
Defined Attach Security Supported. Indicates whether or not the adjacent CP LU supports attach security.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInRluDefSessSecSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.9
Defined Session Security Supported. Indicates whether or not the adjacent CP LU may omit a password in the user data portion of the BIND.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInRluDefEnhanSecSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.10
Defined Enhance Security Supported. Indicates the level of enhance security support: 1 = none 2 = level 1 3 = level 2
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), level1(2), level2(3)

ibmappcInRluActType		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.11
Indicates whether the LU active definitions are currently active or not currently active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	active(1), notActive(2)

ibmappcInRluActParaSessSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.12
Active Parallel Sessions Supported. Indicates whether or not multiple session between the partner LU and its associated local LU are permitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInRluActCnosSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.13
Active CNOS Supported. Indicates whether or not Change Number of Sessions (CNOS) will be used to negotiate session limits between the logical points.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInRluActAllVerSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.14
Active Already Verified Accepted. Indicates whether or not an attach, specifying that TP security has already been verified, is accepted by the adjacent CP LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInRluActAttSecSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.15
Active Attach Security Supported. Indicates whether or not the adjacent CP LU supports attach security.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInRluActSessSecSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.16
Active Session Security Supported. Indicates whether or not the adjacent CP LU may omit a password in the user data portion of the BIND.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInRluActEnhanSecSup		1.3.6.1.4.1.2.6.2.13.7.2.1.3.1.17
Active Enhance Security Supported. Indicates the level of enhance security support: 1 = none 2 = level 1 3 = level 2
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), level1(2), level2(3)

ibmappcInMdTable		1.3.6.1.4.1.2.6.2.13.7.2.1.4
APPC Mode Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappcInMdEntry

ibmappcInMdEntry		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1
Entry of APPC Mode Information Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappcInMdEntry

ibmappcInMdLluName		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.1
The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInMdRluName		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.2
The network-qualified remote LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInMdModeName		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.3
The mode name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappcInMdDefType		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.4
Indicates whether the mode definition was specified in the nodes system definitions or was dynamically created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sysdef(1), dynamic(2)

ibmappcInMdSessEndTpName		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.5
The session end point transaction program name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..64)

ibmappcInMdSessLimit		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.6
Session Limit. Identifies the total number of sessions that can be established with the partner LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdMaxSessLimit		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.7
Maximum Session Limit. Specifies the maximum number of sessions supported by the LU pair using this mode name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdAutoActLimit		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.8
Auto Activate Limit. Specifies the maximum number of sessions which can be activated when this mode is active.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdDrainSelf		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.9
Drain Self. Indicates whether or not the local LU can be drained.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInMdDrainPart		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.10
Drain Partner. Indicates whether or not the partner LU can be drained.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInMdMinCwinLimit		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.11
Minimum Conwinners Limit. Identifies the minimum number of conwinner sessions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdMinClosLimit		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.12
Minimum Conlossers Limit. Identifies the minimum number of conloser sessions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdRecvPacWinSz		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.13
The size of the receive pacing window.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdSendPacWinSz		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.14
The size of the send pacing window.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdPrefRecvRuSz		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.15
The preferred receive ru size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdPrefSendRuSz		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.16
The preferred send ru size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdRecvRuSzUpBnd		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.17
The receive ru upper boundary size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdSendRuSzUpBnd		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.18
The send ru upper boundary size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdRecvRuSzLoBnd		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.19
The receive ru lower boundary size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdSendRuSzLoBnd		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.20
The send ru lower boundary size.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInMdDfSyncLvl		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.21
The defined sync level.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), confirm(2), syncPoint(3)

ibmappcInMdAcSyncLvl		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.22
The active sync level.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), confirm(2), syncPoint(3)

ibmappcInMdDfCrypto		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.23
Defined cryoptograhy supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInMdAcCrypto		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.24
Active cryptography supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInMdReinit		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.25
The reinitialization parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	operatorControlled(1), primaryOnly(2), secondaryOnly(3), primaryOrSecondary(4)

ibmappcInMdAltCode		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.26
Alternate code supported.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInMdActCwin		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.27
The number of active conwinners.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInMdActClos		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.28
The number of active conlosers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInMdPndCwin		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.29
The number of pending conwinners.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInMdPndClos		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.30
The number of pending conlosers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInMdPtmCwin		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.31
The number of pending termination conlosers.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInMdPtmClos		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.32
The number of pending termination conwinners.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInMdFreeSessLst		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.33
The size of the free seesion list.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInMdWaitReqLst		1.3.6.1.4.1.2.6.2.13.7.2.1.4.1.34
The size of the waiting request list.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInLtpTable		1.3.6.1.4.1.2.6.2.13.7.2.1.5
APPC Local TP Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappcInLtpEntry

ibmappcInLtpEntry		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1
Entry of APPC Local TP Information Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappcInLtpEntry

ibmappcInLtpLuName		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.1
The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInLtpTpName		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.2
The local transaction program name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..64)

ibmappcInLtpDefType		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.3
The TP definition type. Indicates whether the TP was specified in the nodes system definitions or was dynamically created.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sysdef(1), dynamic(2)

ibmappcInLtpSyncLvl		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.4
The TP synchroniztion level.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), confirm(2), syncPoint(3)

ibmappcInLtpInstLmt		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.5
The TP instance limit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInLtpInstNum		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.6
The number of TP instances.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInLtpStatus		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.7
The TP status.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), tempDisabled(2), permDisabled(3)

ibmappcInLtpLongRun		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.8
The long running transaction program.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLtpPfCnos		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.9
The TP Change Number of Sessions (CNOS) privileged function. This parameter specifies whether or not this program is allowed to issue CNOS verbs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLtpPfSessCntl		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.10
The TP Session Control privileged function. This parameter specifies whether or not this program is allowed to issue ACTIVATE_SESSION and DEACTIVATE_SESSION verbs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLtpPfDefine		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.11
The TP Define privileged function. This parameter specifies whether or not this program is allowed to issue DEFINE and DELETE verbs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLtpPfDisplay		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.12
The TP Display privileged function. This parameter specifies whether or not this program is allowed to issue DISPLAY verbs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLtpPfAllocSer		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.13
The TP Allocate Service privileged function. This parameter specifies whether or not this program is allowed to issue the ALLOCATE verb with its TPN parameter specifying an SNA service transmission program.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLtpRescSup		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.14
The TP resources supported parameter. 1. basic conversations 2. mapped conversations 3. all conversations
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	basicConv(1), mappedConv(2), allConv(3)

ibmappcInLtpRecoSup		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.15
The TP reconnect supported parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLtpSecReq		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.16
The TP security required parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLtpSecLvl		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.17
The TP security level parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAdditional(1), specificUsers(2), specificProfiles(3), specificUserProfiles(4), specificUserLus(5), specificUserProfLus(6)

ibmappcInLtpVerPip		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.18
The TP verify pip parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

ibmappcInLtpPipSubNum		1.3.6.1.4.1.2.6.2.13.7.2.1.5.1.19
The TP number of pip subfields.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInSsTable		1.3.6.1.4.1.2.6.2.13.7.2.1.6
APPC Session Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappcInSsEntry

ibmappcInSsEntry		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1
Entry of APPC Session Information Table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappcInSsEntry

ibmappcInSsFqLuName		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.1
The network-qualified CP name or PU name of the node at which the session and cid originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving the LEN node at which the origin LU is located. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInSsPcid		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.2
The procedure correlation identifier (pcid) of a session. It is an 8-octet value assigned by the primary LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

ibmappcInSsPluName		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.3
The primary LU name of the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInSsSluName		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.4
The secondary LU name of the session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInSsModeName		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.5
The Mode Name name used for this session. This is a 1-8 character name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappcInSsCosName		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.6
The Class of Service (COS) name used for this session. This is a 1-8 character name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappcInSsSessType		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.7
The type of session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	lu62(1)

ibmappcInSsSessState		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.8
Indicates the state of the session. 1. session is pending inactive or, 2. session is pending active or, 3. session is active or, 4. session is inactive
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), pendactive(2), active(3), pendinact(4)

ibmappcInSsTransPriority		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.9
The transmission priority of this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInSsPaceType		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.10
The type of pacing used for this session.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), fixed(2), adaptive(3)

ibmappcInSsSendMaxRuSz		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.11
The maximum ru size which can be sent.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInSsRecvMaxRuSz		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.12
The maximum ru size which can be received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInSsEnhanceSecSup		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.13
Enhanced security supported. Indicates the level of enhance security support: 1 = none 2 = level 1 3 = level 2
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), level1(2), level2(3)

ibmappcInSsSendPacingType		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.14
The type of pacing being used for sending data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), fixed(2), adaptive(3)

ibmappcInSsSendRpc		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.15
The send residual pace count. This represents the number of MU's that can still be sent in the current session window.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInSsSendNxWndwSize		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.16
The size of the next window which will be used to send data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInSsRecvPacingType		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.17
The type of pacing being used for receiving data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), fixed(2), adaptive(3)

ibmappcInSsRecvRpc		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.18
The receive residual pace count. This represents the number of MU's that can still be received in the current session window.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInSsRecvNxWndwSize		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.19
The size of the next window which will be used to receive data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

ibmappcInSsSessStartTime		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.20
Time when the session started in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappcInSsSessUpTime		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.21
Length of time the session has been active in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappcInSsCtrUpTime		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.22
Length of time the session counters have been active in hundreds of a second.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappcInSsP2SFmdPius		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.23
Number of FMD PIUs sent from the Primary LU to the Secondary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappcInSsS2PFmdPius		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.24
Number of FMD PIUs sent from the Secondary LU to the Primary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappcInSsP2SNonFmdPius		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.25
Number of non-FMD PIUs sent from the Primary LU to the Secondary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappcInSsS2PNonFmdPius		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.26
Number of non-FMD PIUs sent from the Secondary LU to the Primary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappcInSsP2SFmdBytes		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.27
Number of FMD Bytes sent from the Primary LU to the Secondary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappcInSsS2PFmdBytes		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.28
Number of FMD Bytes sent from the Secondary LU to the Primary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappcInSsP2SNonFmdBytes		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.29
Number of non-FMD Bytes sent from the Primary LU to the Secondary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappcInSsS2PNonFmdBytes		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.30
Number of non-FMD Bytes sent from the Secondary LU to the Primary LU
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ibmappcInSsRscv		1.3.6.1.4.1.2.6.2.13.7.2.1.6.1.31
The route selection control vector (RSCV x'2B') used for this session. It is not present for APPN CP-CP sessions and also not present for LEN nodes. The format of this vector is described in SNA Formats.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

ibmappcInSsStatusTable		1.3.6.1.4.1.2.6.2.13.7.2.1.7
APPC Session Status Table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IbmappcInSsStatusEntry

ibmappcInSsStatusEntry		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1
Entry of APPC Session Status Information Table. This table is indexed by the SsStatusIndex, which is an integer that is continuously updated until it eventually wraps. This provides the management station the ability to retrieve only the updates to the table by using the standard GET NEXT.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IbmappcInSsStatusEntry

ibmappcInSsStatusIndex		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.1
Table index. The value of the index begins at zero and is incremented up to a maximum value of 2**31-1 (2,147,483,647) before wrapping.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ibmappcInSsStatusTime		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.2
Time (in hundreds of a second) since this node was last initialized.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

ibmappcInSsStatusType		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.3
Indicates the entry type: 1. Received a negative bind response from the partner LU. 2. Sent a negative bind response to the partner LU. 3. Session activation rejected by the partner LU. 4. Unbind sent to the partner LU. 5. Unbind received from the partner LU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	recvNegBindRsp(1), sendNegBindRsp(2), sessActRejected(3), unbindSent(4), unbindReceived(5)

ibmappcInSsStatusLocLuName		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.4
The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInSsStatusParLuName		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.5
The network-qualified partner LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..17)

ibmappcInSsStatusModeName		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.6
The mode name.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappcInSsStatusUnbindType		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.7
The type of unbind which terminated the session. This value is consists of one (1) octet; and its meaning is defined in SNA Formats.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

ibmappcInSsStatusSenseCode		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.8
The sense code associated with the termination of the session. This value consists of four (4) octets; and its meaning is defined in SNA Formats.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

ibmappcInSsStatusComponentId		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.9
The name of the component which sent the entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

ibmappcInSsStatusDetectModule		1.3.6.1.4.1.2.6.2.13.7.2.1.7.1.10
The name of the module which detected the condition and sent the entry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)