IEEE8021-MVRPX-MIB
File:
IEEE8021-MVRPX-MIB.mib (8131 bytes)
Imported modules
Imported symbols
Defined Types
Ieee8021MvrpxPortEntry |
|
SEQUENCE |
|
|
|
|
ieee8021MvrpxPortNewOnly |
TruthValue |
|
|
ieee8021MvrpxPortMvrpNewPropagated |
TruthValue |
|
|
ieee8021MvrpxPortXmitZero |
TruthValue |
|
Defined Values
ieee8021MvrpxMib |
1.3.111.2.802.1.1.22 |
Multiple VLAN Registration Protocol extension module for
managing MVRP extensions defined in IEEE Std 802.1Q
Unless otherwise indicated, the references in this MIB
module are to IEEE Std 802.1Q-2014.
Copyright (C) IEEE (2014).
This version of this MIB module is part of IEEE802.1Q;
see the draft itself for full legal notices.
|
MODULE-IDENTITY |
|
|
|
ieee8021MvrpxPortTable |
1.3.111.2.802.1.1.22.1.1 |
A table that contains controls for the Multiple VLAN
Registration Protocol (MVRP) state machines for all of the Ports
of a Bridge. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Ieee8021MvrpxPortEntry |
|
ieee8021MvrpxPortEntry |
1.3.111.2.802.1.1.22.1.1.1 |
Each entry contains the MVRP Registrar controls for one Port. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Ieee8021MvrpxPortEntry |
|
|
ieee8021MvrpxPortNewOnly |
1.3.111.2.802.1.1.22.1.1.1.1 |
The mode of operation of the MVRP state machines on
this port, if enabled. The value of this object and the value
of the individual Port+Attribute type enable object
ieee8021QBridgePortMvrpEnabledStatus combine to control the
state machines as follows:
ieee8021MvrpxPortNewOnly
ieee8021QBridgePortMvrpEnabledStatus
MVRP state machines
not implemented true(1) Full participant
false(2) true(1) Full participant
true(1) true(1) New-only participant
not implemented false(2) MVRP disabled
false(2) false(2) MVRP disabled
true(1) false(2) MVRP disabled
This object affects all MVRP Applicant and Registrar state
machines on this port. A change to the value of this object
will cause a reset of all MVRP state machines for this attribute
type on this port.
The value of this object MUST be retained across
reinitializations of the management system. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
ieee8021MvrpxPortMvrpNewPropagated |
1.3.111.2.802.1.1.22.1.1.1.2 |
The mode of operation of the MVRP on this port, if enabled.
If this object contains the value true(1), then all Static VLAN
Registration Entries that are Registration Fixed are treated as
Registration Fixed (New propagated), and if false(2), as
Registration Fixed (New ignored)
This object affects only the MVRP Applicant and Registrar state
machines on this port. A change to the value of this object
will cause a reset of all MVRP state machines on this port.
The value of this object MUST be retained across
reinitializations of the management system. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
ieee8021MvrpxPortXmitZero |
1.3.111.2.802.1.1.22.1.1.1.3 |
Selects whether MVRP is enabled to transmit 0 as the attribute
value for the one VLAN ID for which this Port is in the untagged
set, true(1) to enable transmit 0, and false(2) to transmit the
VLAN ID. The value 0 is not transmitted unless
ieee8021MvrpxPortNewOnly is true(1).
This feature is optional. If not supported, the system SHALL
NOT allow this object to be set to the value true(1).
The value of this object MUST be retained across
reinitializations of the management system. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
ieee8021MvrpxReqdGroup |
1.3.111.2.802.1.1.22.2.2.1 |
Objects in the MVRP extension augmentation table required
group. |
Status: current |
Access: read-create |
OBJECT-GROUP |
|
|
|
ieee8021MvrpxCompliance |
1.3.111.2.802.1.1.22.2.1.1 |
The compliance statement for support by a Bridge of
the IEEE8021-MVRPX-MIB module. |
Status: current |
Access: read-create |
MODULE-COMPLIANCE |
|
|
|