IFT-SNMP-MIB
File:
IFT-SNMP-MIB.mib (70851 bytes)
Imported modules
Imported symbols
Defined Types
| LdEntry |
|
| SEQUENCE |
|
|
|
| |
ldIndex |
Integer32 |
|
| |
ldID |
Integer32 |
|
| |
ldSize |
Integer32 |
|
| |
ldBlkSizeIdx |
Integer32 |
|
| |
ldOpModes |
Integer32 |
|
| |
ldStatus |
Integer32 |
|
| |
ldState |
Integer32 |
|
| |
ldTotalDrvCnt |
Integer32 |
|
| |
ldOnlineDrvCnt |
Integer32 |
|
| |
ldSpareDrvCnt |
Integer32 |
|
| |
ldFailedDrvCnt |
Integer32 |
|
| LvEntry |
|
| SEQUENCE |
|
|
|
| |
lvIndex |
Integer32 |
|
| |
lvID |
Integer32 |
|
| |
lvSize |
Integer32 |
|
| |
lvBlkSizeIdx |
Integer32 |
|
| |
lvOpModes |
Integer32 |
|
| |
lvLdCount |
Integer32 |
|
| |
lvLdList |
OCTET STRING |
|
| PartEntry |
|
| SEQUENCE |
|
|
|
| |
partIndex |
Integer32 |
|
| |
partLdLvID |
Integer32 |
|
| |
partOffset |
Integer32 |
|
| |
partSize |
Integer32 |
|
| LunEntry |
|
| SEQUENCE |
|
|
|
| |
lunIndex |
Integer32 |
|
| |
lunChl |
Integer32 |
|
| |
lunID |
Integer32 |
|
| |
lunNum |
Integer32 |
|
| |
lunLdLvID |
Integer32 |
|
| |
lunPartIdx |
Integer32 |
|
| HddEntry |
|
| SEQUENCE |
|
|
|
| |
hddIndex |
Integer32 |
|
| |
hddLogChlNum |
Integer32 |
|
| |
hddPhyChlNum |
Integer32 |
|
| |
hddScsiId |
Integer32 |
|
| |
hddScsiLun |
Integer32 |
|
| |
hddLdId |
Integer32 |
|
| |
hddSize |
Integer32 |
|
| |
hddBlkSizeIdx |
Integer32 |
|
| |
hddSpeed |
Integer32 |
|
| |
hddDataWidth |
Integer32 |
|
| |
hddStatus |
Integer32 |
|
| |
hddState |
Integer32 |
|
| |
hddSlotNum |
Integer32 |
|
| |
hddResvSpace |
Integer32 |
|
| |
hddModelStr |
OCTET STRING |
|
| |
hddFwRevStr |
OCTET STRING |
|
| |
hddSerialNum |
OCTET STRING |
|
| ChlEntry |
|
| SEQUENCE |
|
|
|
| |
chlIndex |
Integer32 |
|
| |
chlLogChlNum |
Integer32 |
|
| |
chlPhyChlNum |
Integer32 |
|
| |
chlType |
Integer32 |
|
| |
chlChipType |
Integer32 |
|
| |
chlMaxSupId |
Integer32 |
|
| |
chlMaxSupLun |
Integer32 |
|
| |
chlMode |
Integer32 |
|
| |
chlScsiIdBitmap |
Integer32 |
|
| |
chlFibreIdBase |
Integer32 |
|
| |
chlHostIdBitmap |
Integer32 |
|
| |
chlDrvPid |
Integer32 |
|
| |
chlDrvSid |
Integer32 |
|
| |
chlMaxTxPeriod |
Integer32 |
|
| |
chlMinTxPeriod |
Integer32 |
|
| |
chlDefTxPeriod |
Integer32 |
|
| |
chlCurTxPeriod |
Integer32 |
|
| |
chlMaxTxWidth |
Integer32 |
|
| |
chlMinTxWidth |
Integer32 |
|
| |
chlDefTxWidth |
Integer32 |
|
| |
chlCurTxWidth |
Integer32 |
|
| |
chlMaxTagCnt |
Integer32 |
|
| |
chlDefTagCnt |
Integer32 |
|
| LuEntry |
|
| SEQUENCE |
|
|
|
| |
luIndex |
Integer32 |
|
| |
luDescriptor |
Integer32 |
|
| |
luClassCode |
Integer32 |
|
| |
luTypeCode |
Integer32 |
|
| |
luVendorID |
OCTET STRING |
|
| |
luIDString |
OCTET STRING |
|
| |
luHWRev |
OCTET STRING |
|
| |
luSWRev |
OCTET STRING |
|
| |
luChlNum |
Integer32 |
|
| |
luIDNum |
Integer32 |
|
| LuDevEntry |
|
| SEQUENCE |
|
|
|
| |
luDevTabIdx |
Integer32 |
|
| |
luDescriptor |
Integer32 |
|
| |
luClassCode |
Integer32 |
|
| |
luTypeCode |
Integer32 |
|
| |
luDevDescriptor |
Integer32 |
|
| |
luDevTypeCode |
Integer32 |
|
| |
luDevIndex |
Integer32 |
|
| |
luDevDescription |
OCTET STRING |
|
| |
luDevValue |
Integer32 |
|
| |
luDevValueUnit |
Integer32 |
|
| |
luDevChlNum |
Integer32 |
|
| |
luDevIDNum |
Integer32 |
|
| |
luDevStatus |
Integer32 |
|
| ExtLunEntry |
|
| SEQUENCE |
|
|
|
| |
extLunIndex |
Integer32 |
|
| |
extLunGroupName |
OCTET STRING |
|
| |
extLunHostIDWWN |
OCTET STRING |
|
| |
extLunHostIDMask |
OCTET STRING |
|
| |
extLunFilterType |
OCTET STRING |
|
| |
extLunAccessMode |
OCTET STRING |
|
| |
extLunChl |
Integer32 |
|
| |
extLunID |
Integer32 |
|
| |
extLunNum |
Integer32 |
|
| |
extLunLdLvID |
Integer32 |
|
| |
extLunPartIdx |
Integer32 |
|
| AllEvtEntry |
|
| SEQUENCE |
|
|
|
| |
evtTableIdx |
Integer32 |
|
| |
evtSource |
OCTET STRING |
|
| |
evtSeverity |
OCTET STRING |
|
| |
evtIndex |
Integer32 |
|
| |
evtType |
OCTET STRING |
|
| |
evtCode |
OCTET STRING |
|
| CtlrEvtEntry |
|
| SEQUENCE |
|
|
|
| |
evtTableIdx |
Integer32 |
|
| |
evtSource |
OCTET STRING |
|
| |
evtSeverity |
OCTET STRING |
|
| |
evtIndex |
Integer32 |
|
| |
evtType |
OCTET STRING |
|
| |
evtCode |
OCTET STRING |
|
| DrvEvtEntry |
|
| SEQUENCE |
|
|
|
| |
evtTableIdx |
Integer32 |
|
| |
evtSource |
OCTET STRING |
|
| |
evtSeverity |
OCTET STRING |
|
| |
evtIndex |
Integer32 |
|
| |
evtType |
OCTET STRING |
|
| |
evtCode |
OCTET STRING |
|
| |
evtLdID |
Integer32 |
|
| |
evtLogChl |
Integer32 |
|
| |
evtID |
Integer32 |
|
| |
evtLun |
Integer32 |
|
| HostEvtEntry |
|
| SEQUENCE |
|
|
|
| |
evtTableIdx |
Integer32 |
|
| |
evtSource |
OCTET STRING |
|
| |
evtSeverity |
OCTET STRING |
|
| |
evtIndex |
Integer32 |
|
| |
evtType |
OCTET STRING |
|
| |
evtCode |
OCTET STRING |
|
| |
evtChl |
Integer32 |
|
| |
evtID |
Integer32 |
|
| |
evtLun |
Integer32 |
|
| LdEvtEntry |
|
| SEQUENCE |
|
|
|
| |
evtTableIdx |
Integer32 |
|
| |
evtSource |
OCTET STRING |
|
| |
evtSeverity |
OCTET STRING |
|
| |
evtIndex |
Integer32 |
|
| |
evtType |
OCTET STRING |
|
| |
evtCode |
OCTET STRING |
|
| |
evtLdID |
Integer32 |
|
| |
evtFailedChl |
Integer32 |
|
| |
evtFailedID |
Integer32 |
|
| |
evtFailedLun |
Integer32 |
|
| GtEvtEntry |
|
| SEQUENCE |
|
|
|
| |
evtTableIdx |
Integer32 |
|
| |
evtSource |
OCTET STRING |
|
| |
evtSeverity |
OCTET STRING |
|
| |
evtIndex |
Integer32 |
|
| |
evtType |
OCTET STRING |
|
| |
evtLuDesc |
Integer32 |
|
| |
evtLuDevDesc |
Integer32 |
|
| |
evtLuClass |
Integer32 |
|
| |
evtLuSubclass |
Integer32 |
|
| |
evtLuDevType |
OCTET STRING |
|
| |
evtCode |
OCTET STRING |
|
| |
evtLuDevIdx |
Integer32 |
|
| |
evtEncChl |
Integer32 |
|
| |
evtEncID |
Integer32 |
|
| |
evtEncLun |
Integer32 |
|
Defined Values
| infortrend |
1.3.6.1.4.1.1714 |
| Infortrend SNMP MIB |
| MODULE-IDENTITY |
|
|
|
| extInterface |
1.3.6.1.4.1.1714.1 |
| MIB of Infortrend External Interface Protocol(Draft: 2.26)
and Generalized Target Configuration Protocol(Draft: 1.33) |
| Status: current |
Access: read-create |
| OBJECT-IDENTITY |
|
|
|
| eventLog |
1.3.6.1.4.1.1714.1.11 |
| OBJECT IDENTIFIER |
|
|
|
| cpuType |
1.3.6.1.4.1.1714.1.1.1.1 |
| CPU type on RAID controller |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| cacheSize |
1.3.6.1.4.1.1714.1.1.1.2 |
| Cache size on RAID controller, in MB |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| memoryType |
1.3.6.1.4.1.1714.1.1.1.3 |
| Cache memory type on RAID controller
0: FPG, 1: EDO, 2: SDRAM, 3: ECC SDRAM |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| fwMajorVersion |
1.3.6.1.4.1.1714.1.1.1.4 |
| Firmware major version |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| fwMinorVersion |
1.3.6.1.4.1.1714.1.1.1.5 |
| Firmware minor version |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| brMajorVersion |
1.3.6.1.4.1.1714.1.1.1.7 |
| Bootrecord major version |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| brMinorVersion |
1.3.6.1.4.1.1714.1.1.1.8 |
| Bootrecord minor version |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| serialNum |
1.3.6.1.4.1.1714.1.1.1.10 |
| Serial number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ctlrName |
1.3.6.1.4.1.1714.1.1.1.11 |
| Controller name |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| ctlrCfgModeFlags |
1.3.6.1.4.1.1714.1.1.1.12 |
| Controller configuration mode flags
BIT 0 : Write Back Status (RW)
0: Disabled, 1: Enabled.
BIT 1 : Motor Spin Up (RW)
0: Disabled, 1: Enabled.
BIT 2 : Power Up SCSI Reset (RW)
0: Disabled, 1: Enabled.
BIT 8 : Battery Backup Supported (RO)
0: Not Supported, 1: Supported.
BIT 9 : Battery Backup Present (RO)
0: Absent, 1: Present.
BIT 12 : ECC Function
0: Disabled, 1: Enabled
BIT 15 : JBOD Mode (RW) - This should be ignored if
'JBOD Mode Supported' is not set.
0: Disabled, 1: Enabled.
BIT 16 : LUN Assignment by SCSI ID (RO)
0: Not Supported, 1: Supported.
BIT 17 : Support SCSI LUN > 0 (RO)
BIT 18 : Spanning Logical Drive Support
0: Not Supported, 1: Supported.
BIT 19 : JBOD Mode Supported (RO)
0: Not Supported, 1: Supported.
BIT 20 -- BIT 32 : Reserved. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| privateLogoString |
1.3.6.1.4.1.1714.1.1.1.13 |
| Private logo string |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| privateLogoVendor |
1.3.6.1.4.1.1714.1.1.1.14 |
| Private logo vendor string |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| privateLogoModel |
1.3.6.1.4.1.1714.1.1.1.15 |
| Private logo model string |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| ctlrUniqueID |
1.3.6.1.4.1.1714.1.1.1.16 |
| Controller unique identifier |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| cacheModeFlags |
1.3.6.1.4.1.1714.1.1.2.1 |
| Caching mode flags
BIT 0 : Write Back Status (RW)
0: Disabled, 1: Enabled.
BIT 1 : Read Ahead Disable (RW)
0: Enabled, 1: Disabled.
BIT 2 : Enable/Disable keeping LD/LV
off-line after controller initialization
if cached write data was lost (RW)
0: Disabled, 1: Enabled.
BIT 3 -- BIT 7 : Reserved (Set to 0).
BIT 8 : Cache Optimization Option (RW)
0: Small/Random I/Os, 1: Large/Sequential I/Os
BIT 9 -- BIT 15 : Reserved (Set to 0).
BIT 16 -- BIT 18 : Periodic Cache Sync Period (RW)
For interpretation of values, reference
'Periodic Cache Sync Period Value
Cross-Reference List'.
BIT 19 -- BIT 21 : Cache Flush Initiation
Threshold (RW)
For interpretation of values, reference
'Cache Flush Initiation Threshold Valid
Cross-Reference List'.
BIT 22 -- BIT 25 : Cache Flush Termination
Threshold (RW)
For interpretation of values, reference
'Cache Flush Termination Threshold Valid
Cross-Reference List'.
BIT 26 -- BIT 31 : Reserved (Set to 0). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| cacheBlkSizeIdx |
1.3.6.1.4.1.1714.1.1.2.2 |
| Cache block size index
BIT 0 -- BIT 3 : Cache Block Size Index
Block Size (bytes) = 512 * 2 ** (Block Size Index)
BIT 4 -- BIT 7 : Reserved (Set to 0). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| cacheTotal |
1.3.6.1.4.1.1714.1.1.2.3 |
| Total number of cache blocks |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| cacheDirty |
1.3.6.1.4.1.1714.1.1.2.4 |
| Number of dirty cache blocks |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| maxRebPriorityIdx |
1.3.6.1.4.1.1714.1.1.3.1 |
| Maximum supported rebuild priority index
0: Low, 1: Normal, 2: Improved, 3: High |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| minRebPriorityIdx |
1.3.6.1.4.1.1714.1.1.3.2 |
| Minimum supported rebuild priority index
0: Low, 1: Normal, 2: Improved, 3: High |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| defRebPriorityIdx |
1.3.6.1.4.1.1714.1.1.3.3 |
| Default rebuild priority index
0: Low, 1: Normal, 2: Improved, 3: High |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| curRebPriorityIdx |
1.3.6.1.4.1.1714.1.1.3.4 |
| Current rebuild priority index
0: Low, 1: Normal, 2: Improved, 3: High |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| writeVerifyModeFlags |
1.3.6.1.4.1.1714.1.1.3.5 |
| Write-verify mode flags
BIT 0 : Write-Verify on Normal Writes (RW)
0: Disabled, 1: Enabled.
BIT 1 : Write-Verify on Initialization Writes (RW)
0: Disabled, 1: Enabled.
BIT 2 : Write-Verify on Rebuild Writes (RW)
0: Disabled, 1: Enabled.
BIT 3 -- BIT 7 : Reserved (Set to 0). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| maxQueuedIOCnt |
1.3.6.1.4.1.1714.1.1.4.1 |
| Maximum supported host queued I/O count
== N (> 0) ==> Count = 2 ** ( N - 1 ). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| minQueuedIOCnt |
1.3.6.1.4.1.1714.1.1.4.2 |
| Minimum supported host queued I/O count
== N (> 0) ==> Count = 2 ** ( N - 1 ). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| defQueuedIOCnt |
1.3.6.1.4.1.1714.1.1.4.3 |
| Default host queued I/O count
== N (> 0) ==> Count = 2 ** ( N - 1 ). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| curQueuedIOCnt |
1.3.6.1.4.1.1714.1.1.4.4 |
| Current host queued I/O count
== 0 - Automatically Computed.
== N (> 0) ==> Count = 2 ** ( N - 1 ). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| maxLunNum |
1.3.6.1.4.1.1714.1.1.4.5 |
| Maximum LUNs per host SCSI ID(SCSI-to-SCSI only)
== N ==> LUNs = 2 ** ( N - 1 ) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| minLunNum |
1.3.6.1.4.1.1714.1.1.4.6 |
| Minimum LUNs per host SCSI ID(SCSI-to-SCSI only)
== N ==> LUNs = 2 ** ( N - 1 ) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| defLunNum |
1.3.6.1.4.1.1714.1.1.4.7 |
| Default LUNs per host SCSI ID(SCSI-to-SCSI only)
== N ==> LUNs = 2 ** ( N - 1 ) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| curLunNum |
1.3.6.1.4.1.1714.1.1.4.8 |
| Current LUNs per host SCSI ID(SCSI-to-SCSI only)
== N ==> LUNs = 2 ** ( N - 1 ) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| modeFlags |
1.3.6.1.4.1.1714.1.1.5.1 |
| mode flags of drive-side interface parameters
BIT 0 : Motor Spin Up (RW)
0: Disabled, 1: Enabled.
BIT 1 : Power Up SCSI Reset (RW)
0: Disabled, 1: Enabled.
BIT 2 -- BIT 15 : Reserved (Set to 0)
BITS 16-17: Drive Failure Prediction (SMART) Mode:
== 0 - Disabled.
== 1 - Detect only.
== 2 - Clone drive and keep drive cloned.
== 3 - Clone drive and replace when cloning complete.
BIT 18 : Auto Assign Global Spare Drive (RW)
0: Disabled, 1: Enabled.
BIT 19 -- BIT 31 : Reserved (Set to 0) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| maxAccessDelayTime |
1.3.6.1.4.1.1714.1.1.5.2 |
| Maximum time to delay prior to first disk access(in 5 seconds unit)
== N ==> Delay = N * 5 seconds. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| minAccessDelayTime |
1.3.6.1.4.1.1714.1.1.5.3 |
| Minimum time to delay prior to first disk access(in 5 seconds unit)
== N ==> Delay = N * 5 seconds. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| defAccessDelayTime |
1.3.6.1.4.1.1714.1.1.5.4 |
| Default time to delay prior to first disk access(in 5 seconds unit)
== N ==> Delay = N * 5 seconds. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| curAccessDelayTime |
1.3.6.1.4.1.1714.1.1.5.5 |
| Current time to delay prior to first disk access(in 5 seconds unit)
== 0 ==> No Delay.
== N ==> Delay = N * 5 seconds. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| maxTagCnt |
1.3.6.1.4.1.1714.1.1.5.6 |
| Maximum drive-side SCSI tags per drive(Tags = 2**(N-1)) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| minTagCnt |
1.3.6.1.4.1.1714.1.1.5.7 |
| Minimum drive-side SCSI tags per drive(Tags = 2**(N-1)) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| defTagCnt |
1.3.6.1.4.1.1714.1.1.5.8 |
| Default drive-side SCSI tags per drive(Tags = 2**(N-1)) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| curTagCnt |
1.3.6.1.4.1.1714.1.1.5.9 |
| Current drive-side SCSI tags per drive(Tags = 2**(N-1), 0: Disabled) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| defIOTimeout |
1.3.6.1.4.1.1714.1.1.5.10 |
| Default drive-side SCSI I/O timeout(in 10ms units) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| curIOTimeout |
1.3.6.1.4.1.1714.1.1.5.11 |
| Current drive-side SCSI I/O timeout(in 10ms units) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| defDrvChkPeriod |
1.3.6.1.4.1.1714.1.1.5.12 |
| Default drive-side SCSI drive check period(10ms units) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| curDrvChkPeriod |
1.3.6.1.4.1.1714.1.1.5.13 |
| Current drive-side SCSI drive check period(10ms units) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| defAutoDetectPeriod |
1.3.6.1.4.1.1714.1.1.5.16 |
| Default auto-detect failed drive swaped check period(10ms units) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| curAutoDetectPeriod |
1.3.6.1.4.1.1714.1.1.5.17 |
| Current auto-detect failed drive swaped check period(10ms units) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| redCtlrCfg |
1.3.6.1.4.1.1714.1.1.6.1 |
| Redundant controller configuration
For Reading:
BITS 0 -- 1:
== 0xff - RC Functionality Not Supported.
== 0 - RC Functionality Disabled.
== 1 - RC Functionality Enabled as Primary.
== 2 - RC Functionality Enabled as Secondary.
== 3 - RC Functionality Enabled in Autoconfigure Mode.
BITS 2 -- 6 : Reserved.
BIT 7 : State of Controller Location Signal Support:
0: Not supported, 1: Supported.
For Writing:
== 0 - Disable Redundant Controller Functionality.
== 1 - Enable RC Functionality and set role to Primary.
== 2 - Enable RC Functionality and set role to Primary.
== 3 - Enable RC Functionality and automatically select role.
== 0x81 - Deassert Reset (WO).
== 0xc1 - Simulate Primary Controller Failure (WO).
== 0xc2 - Simulate Secondary Controller Failure (WO).
== 0xc3 - Force secondary controller to kill primary controller Failure (WO).
== 0xc4 - Force primary controller to kill secondary controller Failure (WO). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| redCtlrModeFlags |
1.3.6.1.4.1.1714.1.1.6.2 |
| Redundant controller mode flags
BIT 0 : Cache Synchronization (RW)
0 : Cache NOT Synchronized, 1 : Cache Synchronized
BIT 1 : Host Channel Failover Mode (RW)
0 : Shared host bus, 1 : Independent host bus
BIT 2 : Local/Remote Redundant Mode (RW)
0 : Local Redundant, 1 : Remote Redundant
BITS 2-14 : Reserved.
BIT 15 : Secondary RS-232 Port Status (RW)
0 : Port Disabled, 1 : Port Enabled |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| redCtlrCommType |
1.3.6.1.4.1.1714.1.1.6.3 |
| Redundant controller communication channel type
== 0 - RS-232
== 1 - SCSI/Fibre Channel |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| redCtlrStatus |
1.3.6.1.4.1.1714.1.1.6.4 |
| Redundant controller status
BIT 0 -- BIT 5 : Current Status
== 0 - Inactive.
== 1 - Scanning.
== 0x11 - Detected.
== 0x12 - Enabled.
== 0x3f - Controller Failed.
BIT 6 : Original Controller Role (prior to first controller failure):
0: Primary, 1: Secondary.
BIT 7 : Current Controller Role
0: Primary, 1: Secondary. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldTable |
1.3.6.1.4.1.1714.1.2 |
| Logical drive table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LdEntry |
|
| ldEntry |
1.3.6.1.4.1.1714.1.2.1 |
| Logical drive entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LdEntry |
|
|
| ldIndex |
1.3.6.1.4.1.1714.1.2.1.1 |
| Logical drive index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldID |
1.3.6.1.4.1.1714.1.2.1.2 |
| Logical drive identifier |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldSize |
1.3.6.1.4.1.1714.1.2.1.3 |
| Logical drive size, in Blocks |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldBlkSizeIdx |
1.3.6.1.4.1.1714.1.2.1.4 |
| Block Size = (Block Size Index) Power of 2 |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldOpModes |
1.3.6.1.4.1.1714.1.2.1.5 |
| Logical drive operating modes
BITS 0-3 : RAID Level (RO):
0 : Single Drive
1 : NON-RAID
2 : RAID 0
3 : RAID 1
4 : RAID 3
5 : RAID 4
6 : RAID 5
0xf: NOT DEFINED
BITS 4-6 : Reserved (Set to 0).
BIT 7 : Logical Drive Assignment (R/W):
If CLEAR, Logical Drive is assigned to Primary Controller.
If SET, Logical Drive is assigned to Secondary Controller. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldStatus |
1.3.6.1.4.1.1714.1.2.1.6 |
| Logical drive status
BITS 0-2 : Status Code (RO):
0 : Good
1 : Rebuilding
2 : Initializing
3 : Degraded
4 : Dead
5 : Invalid
6 : Incomplete
7 : Drive Missing
BITS 3-6 : Reserved.
BITS 7 : Logical Drive Off-line (RW). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldState |
1.3.6.1.4.1.1714.1.2.1.7 |
| Logical drive state
BIT 0 : If SET, in process of rebuilding
(degraded mode) or checking/updating
Logical Drive Parity (LD is 'good').
BIT 1 : If SET, in process of expanding Logical Drive.
BIT 2 : If SET, in process of adding SCSI drives
to Logical Drive.
BIT 3-5: Reserved.
BIT 6 : If SET, add SCSI drives operation is paused.
BIT 7 : Reserved. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldTotalDrvCnt |
1.3.6.1.4.1.1714.1.2.1.8 |
| Total hard drive count on logical drive |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldOnlineDrvCnt |
1.3.6.1.4.1.1714.1.2.1.9 |
| On-Line hard drvie count on logical drive |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldSpareDrvCnt |
1.3.6.1.4.1.1714.1.2.1.10 |
| Spare hard drive count on logical drive |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldFailedDrvCnt |
1.3.6.1.4.1.1714.1.2.1.11 |
| Failed hard drive count on logical drive |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lvTable |
1.3.6.1.4.1.1714.1.3 |
| Logical volume table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LvEntry |
|
| lvEntry |
1.3.6.1.4.1.1714.1.3.1 |
| Logical volume entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LvEntry |
|
|
| lvIndex |
1.3.6.1.4.1.1714.1.3.1.1 |
| Logical volume index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lvID |
1.3.6.1.4.1.1714.1.3.1.2 |
| Logical volume identifier |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lvSize |
1.3.6.1.4.1.1714.1.3.1.3 |
| Logical volume size, in Blocks |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lvBlkSizeIdx |
1.3.6.1.4.1.1714.1.3.1.4 |
| Block Size = (Block Size Index) Power of 2 |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lvOpModes |
1.3.6.1.4.1.1714.1.3.1.5 |
| Logical volume operating modes
BITS 0-6 : Reserved (Set to 0).
BIT 7 : Logical Volume Assignment (R/W):
If CLEAR, Logical Volume is assigned to Primary Controller.
If SET, Logical Volume is assigned to Secondary Controller. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lvLdCount |
1.3.6.1.4.1.1714.1.3.1.6 |
| Logical drive counts in this logical volume |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lvLdList |
1.3.6.1.4.1.1714.1.3.1.7 |
| Logical drive identifiers list in this logical volume |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| partTable |
1.3.6.1.4.1.1714.1.4 |
| Partition table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PartEntry |
|
| partEntry |
1.3.6.1.4.1.1714.1.4.1 |
| Partition entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PartEntry |
|
|
| partIndex |
1.3.6.1.4.1.1714.1.4.1.1 |
| Partition index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| partLdLvID |
1.3.6.1.4.1.1714.1.4.1.2 |
| Logical drive/Logical volume identifier |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| partOffset |
1.3.6.1.4.1.1714.1.4.1.3 |
| Partition base offset |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| partSize |
1.3.6.1.4.1.1714.1.4.1.4 |
| Partition size, in Blocks |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lunTable |
1.3.6.1.4.1.1714.1.5 |
| LUN table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LunEntry |
|
| lunEntry |
1.3.6.1.4.1.1714.1.5.1 |
| LUN entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LunEntry |
|
|
| lunIndex |
1.3.6.1.4.1.1714.1.5.1.1 |
| LUN index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lunChl |
1.3.6.1.4.1.1714.1.5.1.2 |
| Logical host channel number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lunID |
1.3.6.1.4.1.1714.1.5.1.3 |
| Host-side SCSI ID |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lunNum |
1.3.6.1.4.1.1714.1.5.1.4 |
| Host-side SCSI LUN |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lunLdLvID |
1.3.6.1.4.1.1714.1.5.1.5 |
| Logical drive/Logical volume identifier |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| lunPartIdx |
1.3.6.1.4.1.1714.1.5.1.6 |
| Partition index of logical drive or logical volume |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddTable |
1.3.6.1.4.1.1714.1.6 |
| Hard disk drive table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
HddEntry |
|
| hddEntry |
1.3.6.1.4.1.1714.1.6.1 |
| Hard disk drive entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
HddEntry |
|
|
| hddIndex |
1.3.6.1.4.1.1714.1.6.1.1 |
| Hard disk drive index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddLogChlNum |
1.3.6.1.4.1.1714.1.6.1.2 |
| Logical channel number to which hard disk drive is connected |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddPhyChlNum |
1.3.6.1.4.1.1714.1.6.1.3 |
| Physical channel number to which hard disk drive is connected |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddScsiId |
1.3.6.1.4.1.1714.1.6.1.4 |
| SCSI ID of hard disk drive |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddScsiLun |
1.3.6.1.4.1.1714.1.6.1.5 |
| SCSI Lun of hard disk drive |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddLdId |
1.3.6.1.4.1.1714.1.6.1.6 |
| Logical drive ID to which hard disk drive is belonged
0 : If Drive Status == Spare Drive, then drive is Global Spare.
Otherwise, indicates drive does not currently belong to any logical drive. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddSize |
1.3.6.1.4.1.1714.1.6.1.7 |
| Hard disk drive size, in Blocks |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddBlkSizeIdx |
1.3.6.1.4.1.1714.1.6.1.8 |
| Block Size = (Block Size Index) Power of 2 |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddSpeed |
1.3.6.1.4.1.1714.1.6.1.9 |
| Hard disk drive data transfer speed, in ns |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddDataWidth |
1.3.6.1.4.1.1714.1.6.1.10 |
| Hard disk drive data transfer width
0: Narrow 1: Wide |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddStatus |
1.3.6.1.4.1.1714.1.6.1.11 |
| Hard disk drive status
0 : New Drive
1 : On-Line Drive
2 : Used Drive
3 : Spare Drive
4 : Drive Initialization in Progress
5 : Drive Rebuild in Progress
6 : Add Drive to Logical Drive in Progress
9 : Global Spare Drive
0x11 : Drive is in process of Cloning another Drive
0x12 : Drive is a valid Clone of another Drive
0x13 : Drive is in process of Copying from another Drive
(for Copy/Replace LD Expansion function)
0x3f : Drive Absent
0x8x: SCSI Device (Type x)
0xfc : Missing Global Spare Drive
0xfd : Missing Spare Drive
0xfe : Missing Drive
0xff : Failed Drive |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddState |
1.3.6.1.4.1.1714.1.6.1.12 |
| Hard disk drive state
BITS 0 -- 6: Reserved.
BIT 7: Drive off-line (RW). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddSlotNum |
1.3.6.1.4.1.1714.1.6.1.13 |
| Hard disk drive slot number, 0: N/A |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddResvSpace |
1.3.6.1.4.1.1714.1.6.1.14 |
| Hard disk drive reserved space
Drive Reserved Space Size (64KB units). When set,
the index into the 'Valid Value List' should
be passed in rather than the size itself.
This will trigger a format or unformat
operation (depending on the direction of the
change) is performed on the drive reserved
space. Note that it is an error to try and
change a the size of the reserved space
without unformatting first or to try and
unformat a drive that has been configured as
a LD member or as a spare/clone. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hddModelStr |
1.3.6.1.4.1.1714.1.6.1.15 |
| Hard disk drive model string |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| hddFwRevStr |
1.3.6.1.4.1.1714.1.6.1.16 |
| Hard disk drive firmware revision string |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| hddSerialNum |
1.3.6.1.4.1.1714.1.6.1.17 |
| Hard disk drive serial number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| chlTable |
1.3.6.1.4.1.1714.1.7 |
| SCSI/Fibre channel table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
ChlEntry |
|
| chlEntry |
1.3.6.1.4.1.1714.1.7.1 |
| SCSI/Fibre channel entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ChlEntry |
|
|
| chlIndex |
1.3.6.1.4.1.1714.1.7.1.1 |
| SCSI/Fibre channel index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlLogChlNum |
1.3.6.1.4.1.1714.1.7.1.2 |
| Logical channel number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlPhyChlNum |
1.3.6.1.4.1.1714.1.7.1.3 |
| Physical channel number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlType |
1.3.6.1.4.1.1714.1.7.1.4 |
| Channel type
0 : SCSI
1 : PCI
2 : FIBRE
3 : Parallel-IDE
4 : SATA
0x11 : Network-IO - LAN
0x40 : Fixed Redundant Communication Channel
Others : not defined |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlChipType |
1.3.6.1.4.1.1714.1.7.1.5 |
| Channel interface chip type |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlMaxSupId |
1.3.6.1.4.1.1714.1.7.1.6 |
| Max supported SCSI id |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlMaxSupLun |
1.3.6.1.4.1.1714.1.7.1.7 |
| Max supported SCSI lun per id |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlMode |
1.3.6.1.4.1.1714.1.7.1.8 |
| Channel mode flags
BIT 0 : Channel Mode (RW)
0: Drive Mode, 1: Host Mode (or dedicated RCC).
BIT 1 : Channel SCSI Termination (SCSI Only) (RW)
0: Disabled, 1: Enabled.
BIT 2 : SCSI Parity (SCSI Only) (RW)
0: Disabled, 1: Enabled.
BIT 3 : Support LUN > 0 (RW)
0: Disabled, 1: Enabled.
BIT 8 : Supports Redundant Channel Communication (RO)
0: Does NOT support, 1: Does support.
BIT 9 : Redundant Controller Communication Enable (RW)
Note that if RCC is enabled on host-mode
channels, then the channel is a dedicated
RCC channel. If it is enabled on drive-mode
channels, then RCC transactions are multiplexed
with standard drive-side IOs on the channel.
0: Disabled, 1: Enabled.
BIT 12 : 'Shelf' Status Input (SCSI Only) (RW)
0: Disabled, 1: Enabled.
BIT 13 : 'Swap' Status Input (SCSI Only) (RW)
0: Disabled, 1: Enabled.
BIT 14 : 'Drive Failure' Status Output (SCSI Only) (RW)
0: Disabled, 1: Enabled.
BIT 15 : Reserved. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlScsiIdBitmap |
1.3.6.1.4.1.1714.1.7.1.9 |
| SCSI host/drive channel id bitmap
BITS 0-15 : Primary Controller SCSI ID Bitmap
BITS 16-31 : Secondary Controller SCSI ID Bitmap |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlFibreIdBase |
1.3.6.1.4.1.1714.1.7.1.10 |
| Fibre host channel id base in units of 0x10.
Note that this is ignored for SCSI channels |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlHostIdBitmap |
1.3.6.1.4.1.1714.1.7.1.11 |
| SCSI/Fibre host channel id bitmap
BITS 0-15 : Primary Controller SCSI ID Bitmap
BITS 16-31 : Secondary Controller SCSI ID Bitmap |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlDrvPid |
1.3.6.1.4.1.1714.1.7.1.12 |
| Primary controller SCSI/Fibre drive channel id
Note: For Fibre Drive Channels, if == 0x7f
then ID will be negotiated. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlDrvSid |
1.3.6.1.4.1.1714.1.7.1.13 |
| Secondary controller SCSI/Fibre drive channel id
Note: For Fibre Drive Channels, if == 0x7f
then ID will be negotiated. If == 0xff,
then Fibre loop not initialized. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlMaxTxPeriod |
1.3.6.1.4.1.1714.1.7.1.14 |
| Maximum synchronized transfer period
(SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlMinTxPeriod |
1.3.6.1.4.1.1714.1.7.1.15 |
| Minimum synchronized transfer period
(SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlDefTxPeriod |
1.3.6.1.4.1.1714.1.7.1.16 |
| Default synchronized transfer period
(SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units, 0 - Auto-negotiate) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlCurTxPeriod |
1.3.6.1.4.1.1714.1.7.1.17 |
| Current synchronized transfer period
(SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlMaxTxWidth |
1.3.6.1.4.1.1714.1.7.1.18 |
| Maximum synchronized transfer width index(SCSI only)
(Index - 0:Narrow, 1:Wide) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlMinTxWidth |
1.3.6.1.4.1.1714.1.7.1.19 |
| Minimum synchronized transfer width index(SCSI only)
(Index - 0:Narrow, 1:Wide) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlDefTxWidth |
1.3.6.1.4.1.1714.1.7.1.20 |
| Default synchronized transfer width index(SCSI only)
(Index - 0:Narrow, 1:Wide) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlCurTxWidth |
1.3.6.1.4.1.1714.1.7.1.21 |
| Current synchronized transfer width index(SCSI only)
(Index - 0:Narrow, 1:Wide) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlMaxTagCnt |
1.3.6.1.4.1.1714.1.7.1.22 |
| Maximum tag count |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| chlDefTagCnt |
1.3.6.1.4.1.1714.1.7.1.23 |
| Default tag count |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luTable |
1.3.6.1.4.1.1714.1.8 |
| Logical unit table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LuEntry |
|
| luEntry |
1.3.6.1.4.1.1714.1.8.1 |
| Logical unit entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LuEntry |
|
|
| luIndex |
1.3.6.1.4.1.1714.1.8.1.1 |
| Logical unit index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDescriptor |
1.3.6.1.4.1.1714.1.8.1.2 |
| Logical unit descriptor |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luClassCode |
1.3.6.1.4.1.1714.1.8.1.3 |
| Logical unit class code
1 - Enclosure Unit: Manages Power supplies, fans, temperature, UPS', and
drive slot states.
2 - 0xfff: Reserved.
0x1000 - 0xffff: Vendor specific. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luTypeCode |
1.3.6.1.4.1.1714.1.8.1.4 |
| Logical unit type code
1 - SAF-TE Management Device.
2 - Controller Peripheral Device.
3 - Customable I2C Peripheral Device.
4 - SES Management Device.
5 - 0xfff: Reserved.
0x1000 - 0xffff: Vendor specific. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luVendorID |
1.3.6.1.4.1.1714.1.8.1.5 |
| Logical unit vendor ID string |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| luIDString |
1.3.6.1.4.1.1714.1.8.1.6 |
| Logical unit ID string |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| luHWRev |
1.3.6.1.4.1.1714.1.8.1.7 |
| Logical unit hardware revision string |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| luSWRev |
1.3.6.1.4.1.1714.1.8.1.8 |
| Logical unit software revision string |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| luChlNum |
1.3.6.1.4.1.1714.1.8.1.9 |
| Channel number to which logical unit is connected |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luIDNum |
1.3.6.1.4.1.1714.1.8.1.10 |
| ID number for logical unit |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDevTable |
1.3.6.1.4.1.1714.1.9 |
| Logical unit device table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LuDevEntry |
|
| luDevEntry |
1.3.6.1.4.1.1714.1.9.1 |
| Logical unit device entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LuDevEntry |
|
|
| luDevTabIdx |
1.3.6.1.4.1.1714.1.9.1.1 |
| Logical unit device table index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDescriptor |
1.3.6.1.4.1.1714.1.9.1.2 |
| Logical unit descriptor |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luClassCode |
1.3.6.1.4.1.1714.1.9.1.3 |
| Logical unit class code
1 - Enclosure Unit: Manages Power supplies, fans, temperature, UPS', and
drive slot states.
2 - 0xfff: Reserved.
0x1000 - 0xffff: Vendor specific. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luTypeCode |
1.3.6.1.4.1.1714.1.9.1.4 |
| Logical unit type code
1 - SAF-TE Management Device.
2 - Controller Peripheral Device.
3 - Customable I2C Peripheral Device.
4 - SES Management Device.
5 - 0xfff: Reserved.
0x1000 - 0xffff: Vendor specific. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDevDescriptor |
1.3.6.1.4.1.1714.1.9.1.5 |
| Logical unit device descriptor |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDevTypeCode |
1.3.6.1.4.1.1714.1.9.1.6 |
| Logical unit device type code
Enclosure Unit Device Types:
1 - Power supply.
2 - Fan.
3 - Temperature sensor.
4 - UPS.
5 - Voltage sensors.
6 - Current sensors.
8 - Temperature Out-of-Range Flags.
9 - Door.
0xa - Speaker.
0xb - Battery-backup battery.
0x11 - Slot states. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDevIndex |
1.3.6.1.4.1.1714.1.9.1.7 |
| Logical unit device index
Can be used to identify device position.
If == 0, Index Not Available. For SAF-TE Logical
Units, this index corresponds to one greater than
the index of the device as presented in the
'Read Enclosure Status' data. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDevDescription |
1.3.6.1.4.1.1714.1.9.1.8 |
| Logical unit device description string |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| luDevValue |
1.3.6.1.4.1.1714.1.9.1.9 |
| Logical unit device value |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDevValueUnit |
1.3.6.1.4.1.1714.1.9.1.10 |
| Logical unit device value unit
Fan: in RPM
Voltage Sensor: in Millivolt
Current Sensor: in Milliamps
Temperature Sensor: in 1/1000 Degreeds C(Absolut value) |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDevChlNum |
1.3.6.1.4.1.1714.1.9.1.11 |
| Logical unit device(device slot) channel number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDevIDNum |
1.3.6.1.4.1.1714.1.9.1.12 |
| Logical unit device(device slot) id number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| luDevStatus |
1.3.6.1.4.1.1714.1.9.1.13 |
| Logical unit device status flags
Power Supply:
BIT 0 - CLEAR: Power supply functioning normally.
SET: Power supply malfunctioning.
BITS 1-5 - Reserved (Set to 0).
BIT 6 - CLEAR: Power supply is ON.
SET: Power supply is OFF.
BIT 7 - CLEAR: Power supply IS present.
SET: Power supply is NOT present.
== 0xff - Status unknown.
Fan:
BIT 0 - CLEAR: Fan functioning normally.
SET: Fan malfunctioning.
BITS 1-5 - Reserved (Set to 0).
BIT 6 - CLEAR: Fan is ON.
SET: Fan is OFF.
BIT 7 - CLEAR: Fan IS present.
SET: Fan is NOT present.
== 0xff - Status unknown.
Temperature Sensor:
BIT 0 - CLEAR: Temp. sensor functioning normally.
SET: Temp. sensor malfunctioning.
BIT 1 - 3: If == 0, Temp. within safe range.
If == 2, Cold Temp. Warning.
If == 3, Hot Temp. Warning.
If == 4, Cold Temp. Limit Exceeded.
If == 5, Hot Temp. Limit Exceeded.
BIT 6 - CLEAR: Temp. Sensor is Activated.
SET: Temp. Sensor is NOT Activated.
BIT 7 - CLEAR: Temperature sensor IS present.
SET: Temperature sensor is NOT present.
== 0xff - Status unknown.
UPS:
BIT 0 - CLEAR: Unit functioning normally.
SET: Unit malfunctioning.
BIT 1 - CLEAR: AC Power present.
SET: AC Power NOT present.
BIT 2 - 3: If == 0, battery fully charged.
If == 1, battery not fully charged.
If == 2, battery charge critically low.
If == 3, battery completely drained.
BITS 4-5 - Reserved (Set to 0).
BIT 6 - CLEAR: UPS is ON.
SET: UPS is OFF.
BIT 7 - CLEAR: UPS IS present.
SET: UPS is NOT present.
== 0xff - Status unknown.
Battery:
BIT 0 - CLEAR: Battery functioning normally.
SET: Battery malfunctioning.
BIT 1 - CLEAR: Battery charging OFF (or trickle).
SET: Battery charging ON.
BIT 2 - 3: If == 0, battery fully charged.
If == 1, battery not fully charged.
If == 2, battery charge critically low.
If == 3, battery completely drained.
BITS 4-5 - Reserved (Set to 0).
BIT 6 - CLEAR: Battery-backup is enabled.
SET: Battery-backup is disabled.
BIT 7 - CLEAR: Battery IS present.
SET: Battery is NOT present.
== 0xff - Status unknown.
Voltage Sensor:
BIT 0 - CLEAR: Voltage sensor functioning normally.
SET: Voltage sensor malfunctioning.
BIT 1 - 3: Current Voltage Sensor State:
If == 0, Voltage within acceptable range.
If == 2, Low Voltage Warning.
If == 3, High Voltage Warning.
If == 4, Low Voltage Limit Exceeded.
If == 5, High Voltage Limit Exceeded.
BIT 4 - 5: Reserved.
BIT 6 - CLEAR: Voltage Sensor is Activated.
SET: Voltage Sensor is NOT Activated.
BIT 7 - CLEAR: Voltage sensor IS present.
SET: Voltage sensor is NOT present.
== 0xff - Voltage Sensor Status unknown.
Current Sensor:
BIT 0 - CLEAR: Current sensor functioning normally.
SET: Current sensor malfunctioning.
BIT 1 - 3: Current Current Sensor State:
If == 0, Current within acceptable range.
If == 3, Over Current Warning.
If == 5, Over Current Limit Exceeded.
BIT 4 - 5: Reserved.
BIT 6 - CLEAR: Current Sensor is Activated.
SET: Current Sensor is NOT Activated.
BIT 7 - CLEAR: Current sensor IS present.
SET: Current sensor is NOT present.
== 0xff - Current Sensor Status unknown.
Door:
BIT 0 - CLEAR: Door OK.
SET: Door, door lock, or door sensor malfunctioning.
BIT 1 - CLEAR: Door is shut.
SET: Door is open.
BITS 2-5 - Reserved (Set to 0).
BIT 6 - CLEAR: Door lock engaged.
SET: Door lock NOT engaged.
BIT 7 - CLEAR: Door IS present.
SET: Door is NOT present.
== 0xff - Status unknown.
Speaker:
BIT 0 - CLEAR: Speaker functioning normally.
SET: Speaker malfunctioning.
BITS 1-5 - Reserved (Set to 0).
BIT 6 - CLEAR: Speaker is ON.
SET: Speaker is OFF.
BIT 7 - CLEAR: Speaker IS present.
SET: Speaker is NOT present.
== 0xff - Status unknown.
Slot:
BIT 0 - CLEAR: Slot sense circuitry functioning normally.
SET: Slot sense circuitry malfunctioning.
BIT 1 - CLEAR: Device in slot has not been marked
'needing replacement' or a replacement
drive has been inserted.
SET: Device in slot has been marked BAD
and is awaiting replacement.
BIT 2 - CLEAR: Slot is activated so that drive can be accessed.
SET: Slot NOT activated.
BITS 3-5 - Reserved (Set to 0).
BIT 6 - CLEAR: Slot is NOT ready for insertion/removal.
SET: Slot is ready for insertion/removal.
BIT 7 - CLEAR: Device inserted in slot.
SET: Slot is empty.
== 0xff - Status unknown. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| extLunTable |
1.3.6.1.4.1.1714.1.10 |
| Extended LUN table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
ExtLunEntry |
|
| extLunEntry |
1.3.6.1.4.1.1714.1.10.1 |
| Extended LUN entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ExtLunEntry |
|
|
| extLunIndex |
1.3.6.1.4.1.1714.1.10.1.1 |
| Extended LUN index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| extLunGroupName |
1.3.6.1.4.1.1714.1.10.1.2 |
| Name of this extended LUN definition |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| extLunHostIDWWN |
1.3.6.1.4.1.1714.1.10.1.3 |
| Host-ID/WWN of this exteded LUN definition |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| extLunHostIDMask |
1.3.6.1.4.1.1714.1.10.1.4 |
| Host-ID/WWN mask of this extended LUN definition |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| extLunFilterType |
1.3.6.1.4.1.1714.1.10.1.5 |
| Filtering type of this extended LUN definition |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| extLunAccessMode |
1.3.6.1.4.1.1714.1.10.1.6 |
| Access mode of this extended LUN definition |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| extLunChl |
1.3.6.1.4.1.1714.1.10.1.7 |
| Logical host channel number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| extLunID |
1.3.6.1.4.1.1714.1.10.1.8 |
| Host-side SCSI ID |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| extLunNum |
1.3.6.1.4.1.1714.1.10.1.9 |
| Host-side SCSI LUN |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| extLunLdLvID |
1.3.6.1.4.1.1714.1.10.1.10 |
| Logical drive/Logical volume identifier |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| extLunPartIdx |
1.3.6.1.4.1.1714.1.10.1.11 |
| Partition index of logical drive or logical volume |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| allEvtTable |
1.3.6.1.4.1.1714.1.11.1 |
| All event table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
AllEvtEntry |
|
| allEvtEntry |
1.3.6.1.4.1.1714.1.11.1.1 |
| All event entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AllEvtEntry |
|
|
| evtTableIdx |
1.3.6.1.4.1.1714.1.11.1.1.1 |
| Event table index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtSource |
1.3.6.1.4.1.1714.1.11.1.1.2 |
| Event source |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtSeverity |
1.3.6.1.4.1.1714.1.11.1.1.3 |
| Event severity |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtIndex |
1.3.6.1.4.1.1714.1.11.1.1.4 |
| Event index |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtType |
1.3.6.1.4.1.1714.1.11.1.1.5 |
| Event type |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtCode |
1.3.6.1.4.1.1714.1.11.1.1.6 |
| Event code |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| ctlrEvtTable |
1.3.6.1.4.1.1714.1.11.2 |
| Controller event table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CtlrEvtEntry |
|
| ctlrEvtEntry |
1.3.6.1.4.1.1714.1.11.2.1 |
| Controller event entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CtlrEvtEntry |
|
|
| evtTableIdx |
1.3.6.1.4.1.1714.1.11.2.1.1 |
| Event table index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtSource |
1.3.6.1.4.1.1714.1.11.2.1.2 |
| Event source |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtSeverity |
1.3.6.1.4.1.1714.1.11.2.1.3 |
| Event severity |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtIndex |
1.3.6.1.4.1.1714.1.11.2.1.4 |
| Event index |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtType |
1.3.6.1.4.1.1714.1.11.2.1.5 |
| Event type |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtCode |
1.3.6.1.4.1.1714.1.11.2.1.6 |
| Event code |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| drvEvtTable |
1.3.6.1.4.1.1714.1.11.3 |
| Drive interface event table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DrvEvtEntry |
|
| drvEvtEntry |
1.3.6.1.4.1.1714.1.11.3.1 |
| Drive event entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DrvEvtEntry |
|
|
| evtTableIdx |
1.3.6.1.4.1.1714.1.11.3.1.1 |
| Event table index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtSource |
1.3.6.1.4.1.1714.1.11.3.1.2 |
| Event source |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtSeverity |
1.3.6.1.4.1.1714.1.11.3.1.3 |
| Event severity |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtIndex |
1.3.6.1.4.1.1714.1.11.3.1.4 |
| Event index |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtType |
1.3.6.1.4.1.1714.1.11.3.1.5 |
| Event type |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtCode |
1.3.6.1.4.1.1714.1.11.3.1.6 |
| Event code |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtLdID |
1.3.6.1.4.1.1714.1.11.3.1.7 |
| Logical drive ID |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtLogChl |
1.3.6.1.4.1.1714.1.11.3.1.8 |
| Logical channel number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtID |
1.3.6.1.4.1.1714.1.11.3.1.9 |
| Node SCSI ID |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtLun |
1.3.6.1.4.1.1714.1.11.3.1.10 |
| SCSI LUN |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| hostEvtTable |
1.3.6.1.4.1.1714.1.11.4 |
| Host interface event table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
HostEvtEntry |
|
| hostEvtEntry |
1.3.6.1.4.1.1714.1.11.4.1 |
| Host interface event entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
HostEvtEntry |
|
|
| evtTableIdx |
1.3.6.1.4.1.1714.1.11.4.1.1 |
| Event table index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtSource |
1.3.6.1.4.1.1714.1.11.4.1.2 |
| Event source |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtSeverity |
1.3.6.1.4.1.1714.1.11.4.1.3 |
| Event severity |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtIndex |
1.3.6.1.4.1.1714.1.11.4.1.4 |
| Event index |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtType |
1.3.6.1.4.1.1714.1.11.4.1.5 |
| Event type |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtCode |
1.3.6.1.4.1.1714.1.11.4.1.6 |
| Event code |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtChl |
1.3.6.1.4.1.1714.1.11.4.1.7 |
| Host SCSI channel number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtID |
1.3.6.1.4.1.1714.1.11.4.1.8 |
| Host SCSI ID |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtLun |
1.3.6.1.4.1.1714.1.11.4.1.9 |
| Host SCSI LUN |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| ldEvtTable |
1.3.6.1.4.1.1714.1.11.5 |
| Logical drive event table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
LdEvtEntry |
|
| ldEvtEntry |
1.3.6.1.4.1.1714.1.11.5.1 |
| Logical drive event entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
LdEvtEntry |
|
|
| evtTableIdx |
1.3.6.1.4.1.1714.1.11.5.1.1 |
| Event table index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtSource |
1.3.6.1.4.1.1714.1.11.5.1.2 |
| Event source |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtSeverity |
1.3.6.1.4.1.1714.1.11.5.1.3 |
| Event severity |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtIndex |
1.3.6.1.4.1.1714.1.11.5.1.4 |
| Event index |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtType |
1.3.6.1.4.1.1714.1.11.5.1.5 |
| Event type |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtCode |
1.3.6.1.4.1.1714.1.11.5.1.6 |
| Event code |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtLdID |
1.3.6.1.4.1.1714.1.11.5.1.7 |
| Logical drive ID |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtFailedChl |
1.3.6.1.4.1.1714.1.11.5.1.8 |
| Logical channel number of the failed hard drive |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtFailedID |
1.3.6.1.4.1.1714.1.11.5.1.9 |
| SCSI ID of the failed hard drive |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtFailedLun |
1.3.6.1.4.1.1714.1.11.5.1.10 |
| SCSI LUN of the failed hard drive |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| gtEvtTable |
1.3.6.1.4.1.1714.1.11.6 |
| Generalized target event table |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
GtEvtEntry |
|
| gtEvtEntry |
1.3.6.1.4.1.1714.1.11.6.1 |
| Generalized target event entry |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
GtEvtEntry |
|
|
| evtTableIdx |
1.3.6.1.4.1.1714.1.11.6.1.1 |
| Event table index |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtSource |
1.3.6.1.4.1.1714.1.11.6.1.2 |
| Event source |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtSeverity |
1.3.6.1.4.1.1714.1.11.6.1.3 |
| Event severity |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtIndex |
1.3.6.1.4.1.1714.1.11.6.1.4 |
| Event index |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtType |
1.3.6.1.4.1.1714.1.11.6.1.5 |
| Event type |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtLuDesc |
1.3.6.1.4.1.1714.1.11.6.1.6 |
| Logical unit descriptor |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtLuDevDesc |
1.3.6.1.4.1.1714.1.11.6.1.7 |
| Logical unit device descriptor |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtLuClass |
1.3.6.1.4.1.1714.1.11.6.1.8 |
| Logical unit class code |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtLuSubclass |
1.3.6.1.4.1.1714.1.11.6.1.9 |
| Logical unit subclass code |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtCode |
1.3.6.1.4.1.1714.1.11.6.1.10 |
| Event code |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtLuDevType |
1.3.6.1.4.1.1714.1.11.6.1.11 |
| Logical unit device type |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| evtLuDevIdx |
1.3.6.1.4.1.1714.1.11.6.1.12 |
| Logical unit device index |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtEncChl |
1.3.6.1.4.1.1714.1.11.6.1.13 |
| Enclosure(SAF-TE/SES) unit SCSI channel number |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtEncID |
1.3.6.1.4.1.1714.1.11.6.1.14 |
| Enclosure(SAF-TE/SES) unit SCSI ID |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| evtEncLun |
1.3.6.1.4.1.1714.1.11.6.1.15 |
| Enclosure(SAF-TE/SES) unit SCSI LUN |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|