INNOVX-CORE-MIB

File: INNOVX-CORE-MIB.mib (22060 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215

Imported symbols

enterprises IpAddress OBJECT-TYPE
DisplayString sysName TRAP-TYPE

Defined Types

CmnTrapAddrEntry  
SEQUENCE    
  cmnTrapAddrIpDest IpAddress
  cmnTrapAddrCommunity DisplayString
  cmnTrapAddrStatus INTEGER

InnovxFeatureEntry  
SEQUENCE    
  innovxFeatureIndex INTEGER
  innovxFeatureName DisplayString
  innovxFeatureEnable INTEGER
  innovxFeatureStatus INTEGER

Defined Values

gdc 1.3.6.1.4.1.498
OBJECT IDENTIFIER    

framerelay 1.3.6.1.4.1.498.22
OBJECT IDENTIFIER    

innovx 1.3.6.1.4.1.498.22.1
OBJECT IDENTIFIER    

coreGroup 1.3.6.1.4.1.498.22.1.1
OBJECT IDENTIFIER    

linkProbe 1.3.6.1.4.1.498.22.1.2
OBJECT IDENTIFIER    

liuGroup 1.3.6.1.4.1.498.22.1.3
OBJECT IDENTIFIER    

casGroup 1.3.6.1.4.1.498.22.1.4
OBJECT IDENTIFIER    

ddsGroup 1.3.6.1.4.1.498.22.1.5
OBJECT IDENTIFIER    

dteGroup 1.3.6.1.4.1.498.22.1.6
OBJECT IDENTIFIER    

coreAdmin 1.3.6.1.4.1.498.22.1.1.1
OBJECT IDENTIFIER    

coreReset 1.3.6.1.4.1.498.22.1.1.2
OBJECT IDENTIFIER    

coreDiags 1.3.6.1.4.1.498.22.1.1.3
OBJECT IDENTIFIER    

coreStatus 1.3.6.1.4.1.498.22.1.1.4
OBJECT IDENTIFIER    

coreTrapArgs 1.3.6.1.4.1.498.22.1.1.5
OBJECT IDENTIFIER    

coreAggRate 1.3.6.1.4.1.498.22.1.1.6
OBJECT IDENTIFIER    

coreFeatures 1.3.6.1.4.1.498.22.1.1.7
OBJECT IDENTIFIER    

innovxMIBversion 1.3.6.1.4.1.498.22.1.1.1.1
Identifies the version of the MIB as `X.YZT' where: X: Major Revision (1-9) Y: Minor Revision (0-9) Z: Typographical Revision (0-9) T: Test Revision (A-Z) Upon formal release, the test revision will not be present.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(5)  

innovxFirmwareVersion 1.3.6.1.4.1.498.22.1.1.1.2
Identifies the version of the firmware as `MM.NN.BB' where: MM: Major Revision (0-99) NN: Minor Revision (0-99) BB: Bug Fix Revision (0-99)
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(8)  

innovxSerialNumber 1.3.6.1.4.1.498.22.1.1.1.3
Identifies the serial number of the unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(16)  

innovxHardwareVersion 1.3.6.1.4.1.498.22.1.1.1.4
Identifies the version of the base card hardware. The released version number is sequenced as follows: --, A-, ... AA, ... ZZ.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(2)  

innovxHardwareDescription 1.3.6.1.4.1.498.22.1.1.1.5
Identifies the model number, memory size and options. Example=> Model: 553, Flash: 2M, RAM: 16M, Options: Cascade
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(255)  

innovxBootCodeVersion 1.3.6.1.4.1.498.22.1.1.1.6
Identifies the version of the bootstrap firmware. The released version number is sequenced as follows: --, A-, ... AA, ... ZZ.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(2)  

innovxHardwareOptions 1.3.6.1.4.1.498.22.1.1.1.7
Identifies the hardware options installed on this innovx product. where 0 = not installed and 1 = installed, as follows: LED description Octet 1 bit 7 - n/u bit 6 - n/u bit 5 - n/u bit 4 - n/u bit 3 - n/u bit 2 - n/u bit 1 - n/u bit 0 - n/u Octet 2 bit 7 - n/u bit 6 - n/u bit 5 - n/u bit 4 - n/u bit 3 - n/u bit 2 - n/u bit 1 - n/u bit 0 - Cascade Adapter
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

cmnTrapAddrTable 1.3.6.1.4.1.498.22.1.1.1.8
A table of management systems ready to accept traps generated by this node. To add an entry to the table, a set on the Community name for the instance (IP Address and UDP PORT) needs to be performed. To delete an entry, a set on the Status to invalid on the instance needs to be performed.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CmnTrapAddrEntry

cmnTrapAddrEntry 1.3.6.1.4.1.498.22.1.1.1.8.1
Information needed to deliver traps to a particular management station. This table holds a maximum of 4 entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  CmnTrapAddrEntry  

cmnTrapAddrIpDest 1.3.6.1.4.1.498.22.1.1.1.8.1.1
The IP address of the management agent receiving traps. The IP address of 0.0.0.0 will not be allowed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

cmnTrapAddrCommunity 1.3.6.1.4.1.498.22.1.1.1.8.1.2
The community name expected by the management station receiving traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

cmnTrapAddrStatus 1.3.6.1.4.1.498.22.1.1.1.8.1.3
The status of the entry. If read and the entry exists, valid(1) will always be returned. Invalid entries will be removed from the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

innovxSoftReset 1.3.6.1.4.1.498.22.1.1.2.1
A set of `reset' on this object instructs the unit to perform a soft reset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), reset(2)  

innovxStatsReset 1.3.6.1.4.1.498.22.1.1.2.2
A set of `reset' on this object instructs the unit to set all statistics tracking objects to zero, including: current interval values, 24 hour total values, number of valid historical interval objects values, and all historical interval objects values (#1 - #96).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), reset(2)  

innovxSelfTest 1.3.6.1.4.1.498.22.1.1.3.1
A set of `start-test' on this object instructs the unit to perform a self test.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), start-test(2)  

innovxSelfTestStatus 1.3.6.1.4.1.498.22.1.1.3.2
Describes the result of a unit self test, during normal operation and after an innovxSoftReset or an innovxDefaultReset this object will read `normal-complete-pass'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal-complete-pass(1), normal-complete-fail(2), test-in-progress(3)  

innovxLedStatus 1.3.6.1.4.1.498.22.1.1.4.1
A bitwise snapshot of the front panel LED states, where 0 = LED off and 1 = LED on, as follows: LED description Octet 1 bit 7 - n/u bit 6 - n/u bit 5 - n/u bit 4 - LAN LAN activity bit 3 - ALM Alarm Condition - any bit 2 - CN Congestion (FECNS & BECNS) bit 1 - TST Test Mode bit 0 - ERR Framing Errors
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1)  

innovxPortStatus 1.3.6.1.4.1.498.22.1.1.4.2
A bitwise snapshot of interface port status conditions and EIA signals, where 0 = condition not present, and 1 = condition present, as follows: Octet 1 - ETHERNET Interface Port Status bit 7 - n/u bit 6 - n/u bit 5 - n/u bit 4 - Transmit Activity bit 3 - Receive Activity bit 2 - Runt packet (<64k bytes) bit 1 - CRC Error bit 0 - Transmit Collisions Octet 2 - PPP/CONSOLE Interface Port Status bit 7 - interface mode: 0 = PPP, 1 = Console, (invalid if 'handshake in progress') bit 6 - handshake in progress = 1/handshake complete = 0 bit 5 - n/u bit 4 - n/u bit 3 - n/u bit 2 - DTR Loss bit 1 - Transmit Activity bit 0 - Receive Activity
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

innovxPortFrameCounts 1.3.6.1.4.1.498.22.1.1.4.3
The total number of frames transmitted and received on each interface port. This object will be reset to zero after a read, and after power up, soft reset, or factory defaults reset. Octet 1 - ETHERNET Interface Transmit Frame Count Octet 2 bit 7 - 2^15 bit 7 - 2^7 bit 6 - 2^14 bit 6 - 2^6 bit 5 - 2^13 bit 5 - 2^5 bit 4 - 2^12 bit 4 - 2^4 bit 3 - 2^11 bit 3 - 2^3 bit 2 - 2^10 bit 2 - 2^2 bit 1 - 2^9 bit 1 - 2^1 bit 0 - 2^8 bit 0 - 2^0 Octet 3 - ETHERNET Interface Receive Frame Count Octet 4 bit 7 - 2^15 bit 7 - 2^7 bit 6 - 2^14 bit 6 - 2^6 bit 5 - 2^13 bit 5 - 2^5 bit 4 - 2^12 bit 4 - 2^4 bit 3 - 2^11 bit 3 - 2^3 bit 2 - 2^10 bit 2 - 2^2 bit 1 - 2^9 bit 1 - 2^1 bit 0 - 2^8 bit 0 - 2^0 Octet 5 - PPP/CONSOLE Intrf Tx Data Byte Count Octet 6 bit 7 - 2^15 bit 7 - 2^7 bit 6 - 2^14 bit 6 - 2^6 bit 5 - 2^13 bit 5 - 2^5 bit 4 - 2^12 bit 4 - 2^4 bit 3 - 2^11 bit 3 - 2^3 bit 2 - 2^10 bit 2 - 2^2 bit 1 - 2^9 bit 1 - 2^1 bit 0 - 2^8 bit 0 - 2^0 Octet 7 - PPP/CONSOLE Intrf Rx Data Byte Count Octet 8 bit 7 - 2^15 bit 7 - 2^7 bit 6 - 2^14 bit 6 - 2^6 bit 5 - 2^13 bit 5 - 2^5 bit 4 - 2^12 bit 4 - 2^4 bit 3 - 2^11 bit 3 - 2^3 bit 2 - 2^10 bit 2 - 2^2 bit 1 - 2^9 bit 1 - 2^1 bit 0 - 2^8 bit 0 - 2^0
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

innovxTrapSeverity 1.3.6.1.4.1.498.22.1.1.5.1
Trap argument describing severity of the trap being reported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), warning(4), info(5)  

innovxTrapState 1.3.6.1.4.1.498.22.1.1.5.2
Trap argument describing the state of the specific condition reported as: active, clear or exceeded.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..16)  

innovxTrapDescription 1.3.6.1.4.1.498.22.1.1.5.3
Trap argument describing the trap being reported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..255)  

innovxTrapThreshold 1.3.6.1.4.1.498.22.1.1.5.4
Trap argument describing the threshold value which was met in reporting the trap condition. This argument will be NULL (size 0) if not applicable to the trap condition being reported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..255)  

innovxTrapActualValue 1.3.6.1.4.1.498.22.1.1.5.5
Trap argument identifying the current event value of this trap. This argument will be NULL (size 0) if not applicable to the trap condition being reported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..255)  

innovxTrapDlci 1.3.6.1.4.1.498.22.1.1.5.6
Trap argument identifying the DLCI number of the specific condition reported. This argument will be set to 0 if not applicable to the trap condition being reported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 16..991  

innovxpvcIdentifier 1.3.6.1.4.1.498.22.1.1.5.7
Comment field for PVC description, backfilled from the FRProbe mib.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..32)  

innovxAlarmTrap 1
Trap used to report all alarm conditions on the Innovx products. Some trap arguments may not apply for specific conditions reported, see above. Imported arguments: sysName - from rfc1213.mib, and pvcIdentifier - from FPProbe.mib, a comment field for DLCI description, pvcIdentifier will be NULL (size 0) if not applicable to the trap condition being reported.
TRAP-TYPE    

ap553DS0Format 1.3.6.1.4.1.498.22.1.1.6.1
Defines the DS0 base rate as either 56K or 64K bits per second. This object value, in conjunction with the ap553NumDS0s object value determines the LIU aggregate bandwidth. `nx64k' defines a DS0 data format as clear channel in which all 8 bits of the DS0 are used for data. `nx56k defines a DS0 data format as 7 bits for data, and 1 bit used for signalling information or unused and forced to marks. The DSU will enforce an 8x(N+1) minimum ones density requirement when ap553NetLineCoding == `ami' and ap553DS0Format == `nx64k' and ap553DS0AllocationScheme == `consecutive'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER nx56k(1), nx64k(2)  

ap553NumberOfDS0s 1.3.6.1.4.1.498.22.1.1.6.2
Defines the number of DS0 cells used for passing DSU data. When ap553DS0AllocationScheme is consecutive, valid values are 1 - N where N <= (25 - ap553StartingDS0). When ap553DS0AllocationScheme is alternate, valid values are 1 - N where N <= (25 - ap553StartingDS0)/2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..24  

innovxFeatureTable 1.3.6.1.4.1.498.22.1.1.7.1
A table of keyable software features contained in this this product. This table holds information about the software features that are available and can be Key enabled on this product. It also holds the status (On/Off) of the enabled features.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    InnovxFeatureEntry

innovxFeatureEntry 1.3.6.1.4.1.498.22.1.1.7.1.1
Software Features that have been Key enabled in this product. This table holds a maximum of 16 entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  InnovxFeatureEntry  

innovxFeatureIndex 1.3.6.1.4.1.498.22.1.1.7.1.1.1
Identifies an entry (row) in the feature table, 1-16 features.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

innovxFeatureName 1.3.6.1.4.1.498.22.1.1.7.1.1.2
The Name of the feature that is available in this software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

innovxFeatureEnable 1.3.6.1.4.1.498.22.1.1.7.1.1.3
The state of the feature, whether it has been Key enabled or not. WEBFLAG Disabled Enabled WEBEND
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

innovxFeatureStatus 1.3.6.1.4.1.498.22.1.1.7.1.1.4
The operational status of the feature, on -- selected, off -- not selected. WEBFLAG Off On WEBEND
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)