INTEL-ES480-SYSTEM-MIB
File:
INTEL-ES480-SYSTEM-MIB.mib (9831 bytes)
Imported modules
Imported symbols
Defined Types
| Es480tFanStatusEntry |
|
| SEQUENCE |
|
|
|
| |
es480tFanNumber |
INTEGER |
|
| |
es480tFanOperational |
TruthValue |
|
Defined Values
| es480tSystem |
1.3.6.1.4.1.343.6.60.1 |
| Intel es480t system objects. |
| MODULE-IDENTITY |
|
|
|
| es480tSaveConfiguration |
1.3.6.1.4.1.343.6.60.1.3 |
| When this object is set, the device will copy the contents
of the configuration database to a buffer and save it to the
persistant store specified by the value of the object. The
save is performed asynchronously, and the snmp agent will
continue to respond to both gets and sets while the save is
taking place. A network management application may use the
intelSaveStatus object to determine when the asynchronous
save operation has completed. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
saveToPrimary(1), saveToSecondary(2) |
|
| es480tSaveStatus |
1.3.6.1.4.1.343.6.60.1.4 |
| This object will return the status of a save operation invoked
by setting the intelSaveConfiguration object. A network
management application can read this object to determine that a
save operation has completed. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
saveInProgress(1), saveNotInProgress(2) |
|
| es480tCurrentConfigInUse |
1.3.6.1.4.1.343.6.60.1.5 |
| Shows which NVRAM configuration store was used at last boot |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
primary(1), secondary(2) |
|
| es480tConfigToUseOnReboot |
1.3.6.1.4.1.343.6.60.1.6 |
| Controls which NVRAM configuration store will be used
on next reboot. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
primary(1), secondary(2) |
|
| es480tCurrentTemperature |
1.3.6.1.4.1.343.6.60.1.8 |
| Current temperature in degrees celcius measured inside
device enclosure. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..100 |
|
| es480tFanStatusEntry |
1.3.6.1.4.1.343.6.60.1.9.1 |
| Entry in table of all internal cooling fans. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Es480tFanStatusEntry |
|
|
| es480tFanNumber |
1.3.6.1.4.1.343.6.60.1.9.1.1 |
| Identifier of cooling fan, numbered from the front and/or
left side of device. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| es480tRedundantPowerStatus |
1.3.6.1.4.1.343.6.60.1.11 |
| Operational status of an external redundant power supply to a device. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notPresent(1), presentOK(2), presentNotOK(3) |
|
| es480tRedundantPowerAlarm |
1.3.6.1.4.1.343.6.60.1.12 |
| Alarm state of an external redundant power supply to a device.
Alarm state indicates either fan failure or overtemperature
condition. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| es480tPrimarySoftwareRev |
1.3.6.1.4.1.343.6.60.1.13 |
| The software revision of the primary image stored in
this device. This string will have a zero length if
the revision is unknown, invalid or not present. This
will also be reported in RMON2 probeSoftwareRev if this
is the software image currently running in the device. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..15) |
|
| es480tSecondarySoftwareRev |
1.3.6.1.4.1.343.6.60.1.14 |
| The software revision of the secondary image stored in
this device. This string will have a zero length if
the revision is unknown, invalid or not present. This
will also be reported in RMON2 probeSoftwareRev if this
is the software image currently running in the device. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..15) |
|
| es480tImageToUseOnReboot |
1.3.6.1.4.1.343.6.60.1.15 |
| Controls which image will be used
on next reboot. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
primary(1), secondary(2) |
|
| es480tSystemID |
1.3.6.1.4.1.343.6.60.1.16 |
| This represents the System ID of the Summit Switch. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..126) |
|
| es480tSystemBoardID |
1.3.6.1.4.1.343.6.60.1.17 |
| This represents the Board ID of the Summit Switch. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..126) |
|
| es480tPowerStatus |
1.3.6.1.4.1.343.6.60.1.21 |
| Operational status of the power supply to a device. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
notPresent(1), presentOK(2), presentNotOK(3) |
|
| es480tPowerAlarm |
1.3.6.1.4.1.343.6.60.1.22 |
| Alarm state of the power supply to a device.
Alarm state indicates either fan failure or overtemperature
condition. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| es480tRmonEnable |
1.3.6.1.4.1.343.6.60.1.23 |
| Setting this to true will cause the agent to
start collecting RMON statistics. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|