INTEL-MPLINK-MIB

File: INTEL-MPLINK-MIB.mib (36576 bytes)

Imported modules

RFC1155-SMI	RFC1213-MIB	INTEL-GEN-MIB
RFC-1212	RFC-1215

Imported symbols

TimeTicks	Counter	DisplayString
mib2ext	OBJECT-TYPE	TRAP-TYPE

Defined Types

OnOff
INTEGER	on(1), off(2)

Attachment
INTEGER	none(1), tenbase-t(2), aui(3), id0(4), id1(5), id2(6), id3(7), eia530-dce(8), test-plug(9), v11-dce(10), v24-dce(11), v35-dce(12), v36-dce(13), eia530-dte(14), v11-dte(15), v24-dte(16), v35-dte(17), v36-dte(18), empty(19), isdn(20), pcmcia-async(21), isdn-e1-rj45(22), isdn-e1-bnc(23), isdn-t1-rj45(24)

CompType
INTEGER	proprietary(1), stac(2)

Direction
INTEGER	unknown(1), incoming(2), outgoing(3)

DataState
INTEGER	down(1), timeCut(2), up(3)

ConnectState
INTEGER	create(1), down(2), outgoingCall(3), incomingCall(4), incomingDisconnect(5), outgoingDisconnect(6), waitDisconnectConfirm(7), error(8), destroy(9), timeCut(10), idle(11), up(12), empty(13)

UserEnum
INTEGER	all(1), ip(2), ipx(3), br(4)

ProtoEnum
INTEGER	ip-all(1), ip-ftp(2), ip-telnet(3), ip-smtp(4), ip-dns(5), ip-bootp(6), ip-http(7), ip-snmp(8), ip-rip(9), ip-tunnel(10), ip-other(11), ipx-all(12), ipx-ncp(13), ipx-spx(14), ipx-rip(15), ipx-sap(16), ipx-type20(17), ipx-other(18), br-all(19), br-bpdu(20), br-other(21)

MplServiceEntry
SEQUENCE
	mplServiceNumber	INTEGER
	mplServiceSlotNumber	INTEGER
	mplServicePlugNumber	INTEGER
	mplServicePlugName	DisplayString
	mplServiceAttachment	Attachment
	mplServiceProvider	INTEGER
	mplServiceBytesSentUpper	Counter
	mplServiceBytesSentLower	Counter
	mplServiceBytesReceivedUpper	Counter
	mplServiceBytesReceivedLower	Counter
	mplServiceLock	OnOff

MplLanEntry
SEQUENCE
	mplLanNumber	INTEGER
	mplLanRxCRCErrors	Counter
	mplLanRxOverrun	Counter
	mplLanRxLong	Counter
	mplLanRxOverflow	Counter
	mplLanRxAlnErrors	Counter
	mplLanRxOuts	Counter
	mplLanRxShort	Counter
	mplLanTxDeferred	Counter
	mplLanTxUnderrun	Counter
	mplLanTxSQEFailure	Counter
	mplLanTxExcDeferral	Counter
	mplLanTxCollExceed	Counter
	mplLanTxLateColl	Counter
	mplLanTxCollisions	Counter
	mplLanTxNoCarrier	Counter

MplWanEntry
SEQUENCE
	mplWanNumber	INTEGER
	mplWanDataState	DataState
	mplWanDataStateTimer	INTEGER
	mplWanConnectState	ConnectState
	mplWanConnectStateTimer	INTEGER
	mplWanCompression	OnOff
	mplWanCompressionType	CompType
	mplWanCallsSucceeded	Counter
	mplWanCallsFailed	Counter
	mplWanCallsAccepted	Counter
	mplWanCallsRejected	Counter
	mplWanRetries	INTEGER
	mplWanDirection	Direction
	mplWanHasBackup	OnOff
	mplWanBackupFor	INTEGER
	mplWanBackupForAttachment	OnOff
	mplWanFlags	INTEGER
	mplWanPppMaster	INTEGER
	mplWanPppSlaveUpCount	INTEGER
	mplWanActivityTimeLeft	INTEGER
	mplWanActivity	OnOff
	mplWanTimer	OnOff
	mplWanTimeTillTimecut	OnOff
	mplWanLastPacket	OCTET STRING
	mplWanInCallsPlaced	Counter
	mplWanOutCallsPlaced	Counter
	mplWanInTimeActive	INTEGER
	mplWanOutTimeActive	INTEGER
	mplWanTotalTime	INTEGER

MplCompEntry
SEQUENCE
	mplCompNumber	INTEGER
	mplCompRxDecRxBytesTotalUpper	Counter
	mplCompRxDecRxBytesTotalLower	Counter
	mplCompRxDecRxBytesDecompUpper	Counter
	mplCompRxDecRxBytesDecompLower	Counter
	mplCompRxDecDecompressedUpper	Counter
	mplCompRxDecDecompressedLower	Counter
	mplCompRxDecAllocErrorsUpper	Counter
	mplCompRxDecAllocErrorsLower	Counter
	mplCompRxDecRemoteInits	Counter
	mplCompTxEncInBytesTotalUpper	Counter
	mplCompTxEncInBytesTotalLower	Counter
	mplCompTxEncTxBytesCompUpper	Counter
	mplCompTxEncTxBytesCompLower	Counter
	mplCompTxEncCompressedUpper	Counter
	mplCompTxEncCompressedLower	Counter
	mplCompTxEncAllocErrorsUpper	Counter
	mplCompTxEncAllocErrorsLower	Counter
	mplCompTxEncLocalInits	Counter
	mplCompTxEncTransmitErrors	INTEGER
	mplCompTxEncQueueLength	INTEGER

MplIfStackEntry
SEQUENCE
	mplIfStackNumber	INTEGER
	mplIfStackLowerLayer	INTEGER

MplUtilizationEntry
SEQUENCE
	mplUtilizationPlugNumber	INTEGER
	mplUtilizationMplink	INTEGER
	mplUtilizationUser	UserEnum
	mplUtilizationProtocol	ProtoEnum
	mplUtilizationRxUtil	Counter
	mplUtilizationTxUtil	Counter

Defined Values

mpl		1.3.6.1.4.1.343.6.20
OBJECT IDENTIFIER

mplService		1.3.6.1.4.1.343.6.20.1
OBJECT IDENTIFIER

mplLanSpecific		1.3.6.1.4.1.343.6.20.2
OBJECT IDENTIFIER

mplWanSpecific		1.3.6.1.4.1.343.6.20.3
OBJECT IDENTIFIER

mplIfSpecific		1.3.6.1.4.1.343.6.20.4
OBJECT IDENTIFIER

mplGeneral		1.3.6.1.4.1.343.6.20.5
OBJECT IDENTIFIER

mplUtilization		1.3.6.1.4.1.343.6.20.6
OBJECT IDENTIFIER

mplServiceTable		1.3.6.1.4.1.343.6.20.1.1
This table contains information on MP Links. These entries applies to LAN entries as well as WAN entries.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MplServiceEntry

mplServiceEntry		1.3.6.1.4.1.343.6.20.1.1.1
Information on a particular MP Link.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MplServiceEntry

mplServiceNumber		1.3.6.1.4.1.343.6.20.1.1.1.1
The MP Link number. The MP Link number is the same as the ifIndex for the corresponding upper group in the MIB-2 ifGroup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplServiceSlotNumber		1.3.6.1.4.1.343.6.20.1.1.1.2
The Slot position of the card. Set to 0 for stand-alone products.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplServicePlugNumber		1.3.6.1.4.1.343.6.20.1.1.1.3
The plug number of the physical interface to which the MP Link is associated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplServicePlugName		1.3.6.1.4.1.343.6.20.1.1.1.4
The name of the physical interface to which the MP Link is associated.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..30)

mplServiceAttachment		1.3.6.1.4.1.343.6.20.1.1.1.5
The connector type used to connect the router to the LAN or WAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Attachment

mplServiceProvider		1.3.6.1.4.1.343.6.20.1.1.1.6
The type of provider for this MP Link. For WAN links this specifies the actual protocol stack.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	lan(1), lapbHdlc(2), pppHdlc(3), frHdlc(4), frAttachment(5), lapbIsdn(6), pppIsdn(7), isdnAttachment(8), x25Lapb(9), x25Attachment(10), slip(11), pppMultiMaster(12), pppAodi(13), pppX25(14), pppPcmcia(15), pppTcpTunnel(16), pppPcmciaModem(17), padX25(18), pppAsync(19), asyncAttachment(20), pppX31(21)

mplServiceBytesSentUpper		1.3.6.1.4.1.343.6.20.1.1.1.7
The upper 32 bits of the 64 bits counter which is the number of octets (bytes) sent via the MP Link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplServiceBytesSentLower		1.3.6.1.4.1.343.6.20.1.1.1.8
The lower 32 bits of the 64 bits counter which is the number of octets (bytes) sent via the MP Link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplServiceBytesReceivedUpper		1.3.6.1.4.1.343.6.20.1.1.1.9
The lower 32 bits of the 64 bits counter which is the number of octets (bytes) sent via the MP Link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplServiceBytesReceivedLower		1.3.6.1.4.1.343.6.20.1.1.1.10
The lower 32 bits of the 64 bits counter which is the number of octets (bytes) received via the MP Link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplServiceLock		1.3.6.1.4.1.343.6.20.1.1.1.11
Indicates whether an MP Link has been locked from local management. The link may be unlocked by setting the value to 'off' and locked by setting the value to 'on'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OnOff

mplLanTable		1.3.6.1.4.1.343.6.20.2.1
This table contains information on LAN MP Links.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MplLanEntry

mplLanEntry		1.3.6.1.4.1.343.6.20.2.1.1
Information on a particular LAN MP Link.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MplLanEntry

mplLanNumber		1.3.6.1.4.1.343.6.20.2.1.1.1
The LAN MP Link number. The MP Link number is the same as the ifIndex for the corresponding upper group in the MIB-2 ifGroup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplLanRxCRCErrors		1.3.6.1.4.1.343.6.20.2.1.1.2
The number of frames received which were discarded due to Cyclic Redundancy Check (CRC) errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanRxOverrun		1.3.6.1.4.1.343.6.20.2.1.1.3
The number of frames received which were lost due to RAM overloads within the router. This should not occur.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanRxLong		1.3.6.1.4.1.343.6.20.2.1.1.4
The number of frames received which were discarded due to being larger than the maximum allowable length on the LAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanRxOverflow		1.3.6.1.4.1.343.6.20.2.1.1.5
The number of frames received which were discarded due to lack of buffer capacity.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanRxAlnErrors		1.3.6.1.4.1.343.6.20.2.1.1.6
The number of frames received which were discarded due to having the wrong frame length.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanRxOuts		1.3.6.1.4.1.343.6.20.2.1.1.7
The number of frames received which were processed by higher layer protocols.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanRxShort		1.3.6.1.4.1.343.6.20.2.1.1.8
The number of frames received which were discarded due to being shorter than the smallest allowable length on the LAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanTxDeferred		1.3.6.1.4.1.343.6.20.2.1.1.9
The number of outgoing frames which were discarded due to a busy link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanTxUnderrun		1.3.6.1.4.1.343.6.20.2.1.1.10
The number of outgoing frames which were discarded due to overload.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanTxSQEFailure		1.3.6.1.4.1.343.6.20.2.1.1.11
The number of outbound frames which had Signal Quality Errors (SQE).
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanTxExcDeferral		1.3.6.1.4.1.343.6.20.2.1.1.12
The number of transmission attempts which were delayed for more than 3.2 ms.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanTxCollExceed		1.3.6.1.4.1.343.6.20.2.1.1.13
The number of outbound frames which were discarded due to exceeding 16 collisions on the Ethernet.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanTxLateColl		1.3.6.1.4.1.343.6.20.2.1.1.14
The number of collisions occurring after the first 512 bytes of a frame had been transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanTxCollisions		1.3.6.1.4.1.343.6.20.2.1.1.15
The number of outgoing frames which were discarded due to collisions that occurred during transmissions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLanTxNoCarrier		1.3.6.1.4.1.343.6.20.2.1.1.16
The number of No Carrier detections during transmissions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplWanTable		1.3.6.1.4.1.343.6.20.3.1
This table contains information on WAN MP Links.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MplWanEntry

mplWanEntry		1.3.6.1.4.1.343.6.20.3.1.1
Information on a particular WAN MP Link.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MplWanEntry

mplWanNumber		1.3.6.1.4.1.343.6.20.3.1.1.1
The WAN MP Link number. The MP Link number is the same as the ifIndex for the corresponding upper group in the MIB-2 ifGroup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanDataState		1.3.6.1.4.1.343.6.20.3.1.1.2
The state of the MP Link seen from the higher layer protocol.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DataState

mplWanDataStateTimer		1.3.6.1.4.1.343.6.20.3.1.1.3
The time in seconds since the MP Link entered the Data State.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanConnectState		1.3.6.1.4.1.343.6.20.3.1.1.4
Indicates the connection state of the WAN MP Link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	ConnectState

mplWanConnectStateTimer		1.3.6.1.4.1.343.6.20.3.1.1.5
The time in seconds since the MP Link entered the Connect State.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanCompression		1.3.6.1.4.1.343.6.20.3.1.1.6
Indicates if data compression is used over the WAN MP Link. For frame relay links compression is not negotiated. For all other WAN protocols the compression will remain 'off' if not configured in both routers over the link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OnOff

mplWanCompressionType		1.3.6.1.4.1.343.6.20.3.1.1.7
Proprietary compression is used for LAPB and X.25 MP Links. For all other WAN protocols the Stac compression algorithm is used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	CompType

mplWanCallsSucceeded		1.3.6.1.4.1.343.6.20.3.1.1.8
The number of outgoing call which succeeded in making the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplWanCallsFailed		1.3.6.1.4.1.343.6.20.3.1.1.9
The number of outgoing call which failed to make the connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplWanCallsAccepted		1.3.6.1.4.1.343.6.20.3.1.1.10
The number of incoming calls which were accepted on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplWanCallsRejected		1.3.6.1.4.1.343.6.20.3.1.1.11
The number of incoming calls which were rejected on this link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplWanRetries		1.3.6.1.4.1.343.6.20.3.1.1.12
The number of retries made for outgoing calls. May be set to zero which causes the call sequence to restarted.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

mplWanDirection		1.3.6.1.4.1.343.6.20.3.1.1.13
Shows who initiated the call. 'incoming' if the call was initiated by the remote router and 'outgoing' if the call was inititated by this router. For PPP Multi Links the direction refers the the direction of the first slave link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Direction

mplWanHasBackup		1.3.6.1.4.1.343.6.20.3.1.1.14
Indicates whether this link has a backup link configured for it.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OnOff

mplWanBackupFor		1.3.6.1.4.1.343.6.20.3.1.1.15
Shows the primary link for which this link is the backup. The value 0 indicates that this is not a backup link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanBackupForAttachment		1.3.6.1.4.1.343.6.20.3.1.1.16
Indicates whether this link is a backup for an attachment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OnOff

mplWanFlags		1.3.6.1.4.1.343.6.20.3.1.1.17
WAN Flags dataCompressionMask 0x0001 acceptIncomingMask 0x0002 permitOutgoingMask 0x0004 permitTimeCutMask 0x0008 chapMask 0x0010 - CHAP, PPP only papMask 0x0020 - PAP, PPP only onlyReplyChapMask 0x0040 slaveLink 0x0080 blockOutgoing 0x0100 blockIncoming 0x0200 isLeased 0x0400 dataCompressionMode 0x0800 - PPP new-stac compression flag activitySoft 0x1000 - Activity timer only sends trap
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanPppMaster		1.3.6.1.4.1.343.6.20.3.1.1.18
Indicates the master link for a slave link. For master links and links not associated with a PPP Multi Link the value is 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanPppSlaveUpCount		1.3.6.1.4.1.343.6.20.3.1.1.19
The number of slave links in Connect State 'up'. For slave links and links not associated with a PPP Multi Link the value is 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanActivityTimeLeft		1.3.6.1.4.1.343.6.20.3.1.1.20
The time remaining in seconds until the Daily Activity Limit will close and lock the link. When the Daily Activity Limit has been reached, the link can be activated by setting mplWanActivity to 'on'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanActivity		1.3.6.1.4.1.343.6.20.3.1.1.21
Indicates whether the Daily Activity Limit has been reached and locked the link. To unlock the link set the value to 'off'. It is not possible to set to the value to 'on'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OnOff

mplWanTimer		1.3.6.1.4.1.343.6.20.3.1.1.22
Indicates whether an MP Link timer has locked the link. 'on' means the link is locked.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OnOff

mplWanTimeTillTimecut		1.3.6.1.4.1.343.6.20.3.1.1.23
Time left in seconds until time cut
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanLastPacket		1.3.6.1.4.1.343.6.20.3.1.1.24
The first byte in this string identifies the type of packet that opened the link the last time. IP 1 Internet Protocols 0xcc IPX 2 Novell IPX 0x800000008137 STA_ETH 3 Bridge-Ether 0x800080c20007 STA_FRAG 4 Bridge-Frag 0x800080c2000d STA_BPDU 5 Bridge-BPDU 0x800080c2000e STA_CRAY 6 Bridge-Cray 0x800000800500 STA_ETH_FCS 15 Bridge-FCS After this byte follows a part of the packet header.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(64)

mplWanInCallsPlaced		1.3.6.1.4.1.343.6.20.3.1.1.25
??? Number of calls placed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplWanOutCallsPlaced		1.3.6.1.4.1.343.6.20.3.1.1.26
??? Number of calls placed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplWanInTimeActive		1.3.6.1.4.1.343.6.20.3.1.1.27
The time in seconds that the link was in the Up state for incoming calls.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanOutTimeActive		1.3.6.1.4.1.343.6.20.3.1.1.28
The time in seconds that the link was in the Up state for outcoming calls.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplWanTotalTime		1.3.6.1.4.1.343.6.20.3.1.1.29
???
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplCompTable		1.3.6.1.4.1.343.6.20.3.2
Compression table with counters and other information regarding the Transmit and Receive Decoder.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MplCompEntry

mplCompEntry		1.3.6.1.4.1.343.6.20.3.2.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MplCompEntry

mplCompNumber		1.3.6.1.4.1.343.6.20.3.2.1.1
The WAN MP Link number. The MP Link number is the same as the ifIndex for the corresponding upper group in the MIB-2 ifGroup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplCompRxDecRxBytesTotalUpper		1.3.6.1.4.1.343.6.20.3.2.1.2
The upper 32 bits of the 64 bits counter which is the number of bytes received by the Receive Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompRxDecRxBytesTotalLower		1.3.6.1.4.1.343.6.20.3.2.1.3
The lower 32 bits of the 64 bits counter which is the number of bytes received by the Receive Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompRxDecRxBytesDecompUpper		1.3.6.1.4.1.343.6.20.3.2.1.4
The upper 32 bits of the 64 bits counter which is the number of bytes sent by the Receive Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompRxDecRxBytesDecompLower		1.3.6.1.4.1.343.6.20.3.2.1.5
The lower 32 bits of the 64 bits counter which is the number of bytes sent by the Receive Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompRxDecDecompressedUpper		1.3.6.1.4.1.343.6.20.3.2.1.6
The upper 32 bits of the 64 bits counter which is the number of packets decompressed by the Receive Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompRxDecDecompressedLower		1.3.6.1.4.1.343.6.20.3.2.1.7
The lower 32 bits of the 64 bits counter which is the number of packets decompressed by the Receive Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompRxDecAllocErrorsUpper		1.3.6.1.4.1.343.6.20.3.2.1.8
The upper 32 bits of the 64 bits counter which is the number of allocation errors in the Receive Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompRxDecAllocErrorsLower		1.3.6.1.4.1.343.6.20.3.2.1.9
The lower 32 bits of the 64 bits counter which is the number of allocation errors in the Receive Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompRxDecRemoteInits		1.3.6.1.4.1.343.6.20.3.2.1.10
Number of remote initializations by the Receive Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompTxEncInBytesTotalUpper		1.3.6.1.4.1.343.6.20.3.2.1.11
The upper 32 bits of the 64 bits counter which is the number of bytes received by the Transmit Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompTxEncInBytesTotalLower		1.3.6.1.4.1.343.6.20.3.2.1.12
The lower 32 bits of the 64 bits counter which is the number of bytes received by the Transmit Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompTxEncTxBytesCompUpper		1.3.6.1.4.1.343.6.20.3.2.1.13
The upper 32 bits of the 64 bits counter which is the number of bytes sent by the Transmit Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompTxEncTxBytesCompLower		1.3.6.1.4.1.343.6.20.3.2.1.14
The lower 32 bits of the 64 bits counter which is the number of bytes sent by the Transmit Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompTxEncCompressedUpper		1.3.6.1.4.1.343.6.20.3.2.1.15
The upper 32 bits of the 64 bits counter which is the number of packets compressed by the Transmit Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompTxEncCompressedLower		1.3.6.1.4.1.343.6.20.3.2.1.16
The lower 32 bits of the 64 bits counter which is the number of packets compressed by the Transmit Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompTxEncAllocErrorsUpper		1.3.6.1.4.1.343.6.20.3.2.1.17
The upper 32 bits of the 64 bits counter which is the number of allocation errors in the Transmit Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompTxEncAllocErrorsLower		1.3.6.1.4.1.343.6.20.3.2.1.18
The lower 32 bits of the 64 bits counter which is the number of allocation errors in the Transmit Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompTxEncLocalInits		1.3.6.1.4.1.343.6.20.3.2.1.19
Number of local initializations by the Receive Decoder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplCompTxEncTransmitErrors		1.3.6.1.4.1.343.6.20.3.2.1.20
Number of transmit errors
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplCompTxEncQueueLength		1.3.6.1.4.1.343.6.20.3.2.1.21
Queue length
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplIfStackTable		1.3.6.1.4.1.343.6.20.4.1
This table contains information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub- layers run 'on top of' which other sub-layers. Each sub-layer corresponds to a conceptual row in the ifTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MplIfStackEntry

mplIfStackEntry		1.3.6.1.4.1.343.6.20.4.1.1
Information on a particular relationship between two sub-layers, specifying that one sub-layer runs on 'top' of the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MplIfStackEntry

mplIfStackNumber		1.3.6.1.4.1.343.6.20.4.1.1.1
The MP Link number. The MP Link number is the same as the ifIndex for the corresponding upper group in the MIB-2 ifGroup.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplIfStackLowerLayer		1.3.6.1.4.1.343.6.20.4.1.1.2
The value of ifIndex corresponding to the lower sub- layer of the relationship, i.e., the sub-layer which runs 'below' the sub-layer identified by the corresponding instance of mplIfStackNumber. If there is no lower sub-layer, then this object has the value 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplGeneralOverviewChange		1.3.6.1.4.1.343.6.20.5.1
The value of sysUpTime at the time any MP Link seen from the overview changed state or the like.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

mplGeneralIfgroupStatus		1.3.6.1.4.1.343.6.20.5.2
A table describing the status of all ifgroups. Bit 0-3: State: 001 = Up, 010 = Down, 011 = Timecut, 100 = Disabled 111 = Lock. Bit 4: Reserved for future use Bit 5: IP status: 1 = Up, 0 = Down. (This bit is only used for MPLinks) Bit 6: IPX status: 1 = Up, 0 = Down. (This bit is only used for MPLinks) Bit 7: Bridge status: 1 = Up, 0 = Down. (This bit is only used for MPLinks)
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(255)

mplUtilizationTable		1.3.6.1.4.1.343.6.20.6.1
Utilization table
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MplUtilizationEntry

mplUtilizationEntry		1.3.6.1.4.1.343.6.20.6.1.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	MplUtilizationEntry

mplUtilizationPlugNumber		1.3.6.1.4.1.343.6.20.6.1.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplUtilizationMplink		1.3.6.1.4.1.343.6.20.6.1.1.2
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

mplUtilizationUser		1.3.6.1.4.1.343.6.20.6.1.1.3
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	UserEnum

mplUtilizationProtocol		1.3.6.1.4.1.343.6.20.6.1.1.4
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	ProtoEnum

mplUtilizationRxUtil		1.3.6.1.4.1.343.6.20.6.1.1.5
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplUtilizationTxUtil		1.3.6.1.4.1.343.6.20.6.1.1.6
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

mplLockEvent		1
Lock state changed to for link . This trap is sent when an MP Link is locked or unlocked from local management or via SNMP.
TRAP-TYPE

mplWanRetriesEvent		2
Max. retries exceeded () for link . This trap is sent when an MP Link has had more failed connect-attempts than allowed in the configuration.
TRAP-TYPE

mplWanActivityEvent		3
Daily Activity Limit has been reached. Link locked. This trap is sent when the Daily Activity Limit has been reached and locked the link.
TRAP-TYPE

mplWanTimerEvent		4
Link timer has changed lock state to for link . This trap is sent when an MP Link timer has locked or unlocked the link.
TRAP-TYPE