INTEL-VLAN-MIB

File: INTEL-VLAN-MIB.mib (73000 bytes)

Imported modules

RFC-1215	RFC1155-SMI	RFC1213-MIB
INTEL-GEN-MIB	RFC-1212

Imported symbols

TRAP-TYPE	TimeTicks	IpAddress
DisplayString	sysName	mib2ext
OBJECT-TYPE

Defined Types

EthMacAddress
OCTET STRING

PolicyVlanEntry
SEQUENCE
	policyVlanId	INTEGER
	policyVlanName	DisplayString
	policyVlanCreateObj	OCTET STRING
	policyVlanDeleteObj	INTEGER

PolicyMacRuleEntry
SEQUENCE
	policyMacRuleVlanId	INTEGER
	policyMacRuleAddress	EthMacAddress
	policyMacRuleCreateObj	OCTET STRING
	policyMacRuleDeleteObj	INTEGER

PolicyIslMacRuleEntry
SEQUENCE
	policyIslMacRuleVlanId	INTEGER
	policyIslMacRuleAddress	EthMacAddress
	policyIslMacRuleCreateObj	OCTET STRING
	policyIslMacRuleDeleteObj	INTEGER

PolicyIpRuleEntry
SEQUENCE
	policyIpRuleVlanId	INTEGER
	policyIpRuleAddress	IpAddress
	policyIpRuleCreateObj	OCTET STRING
	policyIpRuleDeleteObj	INTEGER

PolicyIpNetRuleEntry
SEQUENCE
	policyIpNetRuleVlanId	INTEGER
	policyIpNetRuleAddress	IpAddress
	policyIpNetRuleMask	IpAddress
	policyIpNetRuleCreateObj	OCTET STRING
	policyIpNetRuleDeleteObj	INTEGER

PolicyPortRuleEntry
SEQUENCE
	policyPortRuleVlanId	INTEGER
	policyPortRuleNumber	INTEGER
	policyPortRuleCreateObj	OCTET STRING
	policyPortRuleDeleteObj	INTEGER

PolicyPortSettingsEntry
SEQUENCE
	policyPortSettingsPortNumber	INTEGER
	policyPortSettingsIpLearning	INTEGER

PolicyStackPortRuleEntry
SEQUENCE
	policyStackPortRuleVlanId	INTEGER
	policyStackPortRuleSwitchMac	EthMacAddress
	policyStackPortRuleNumber	INTEGER
	policyStackPortRuleCreateObj	OCTET STRING
	policyStackPortRuleDeleteObj	INTEGER

LearnedMacEntry
SEQUENCE
	learnedMacAddress	EthMacAddress
	learnedMacType	OCTET STRING
	learnedMacPortNo	INTEGER
	learnedMacIpAddress	IpAddress

LearnedMacVlanEntry
SEQUENCE
	learnedMacVlanMac	EthMacAddress
	learnedMacVlanIndex	INTEGER
	learnedMacVlanName	DisplayString

LearnedVlanPortEntry
SEQUENCE
	learnedVlanPortNo	INTEGER
	learnedVlanPortVlanIndex	INTEGER
	learnedVlanPortVlanName	DisplayString

LearnedVlanIdEntry
SEQUENCE
	learnedVlanId	INTEGER
	learnedVlanIdVlanName	DisplayString

IslEntry
SEQUENCE
	islIfIndex	INTEGER
	islMacAddress	EthMacAddress
	islIpAddress	IpAddress

Defined Values

vlan		1.3.6.1.4.1.343.6.11
OBJECT IDENTIFIER

vlanPolicy		1.3.6.1.4.1.343.6.11.1
OBJECT IDENTIFIER

vlanLearned		1.3.6.1.4.1.343.6.11.2
OBJECT IDENTIFIER

vlanIsl		1.3.6.1.4.1.343.6.11.3
OBJECT IDENTIFIER

vlanEditToken		1.3.6.1.4.1.343.6.11.4
OBJECT IDENTIFIER

vlanTrapObjects		1.3.6.1.4.1.343.6.11.6
OBJECT IDENTIFIER

vlanPolicyDomainName		1.3.6.1.4.1.343.6.11.1.1
The VLAN Domain name. All VLAN configuration and connectivity is separated in domains.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..8)

vlanPolicyServerSeqNo		1.3.6.1.4.1.343.6.11.1.2
The sequence number of the configuration policy of the VLAN sever.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vlanPolicyClientSeqNo		1.3.6.1.4.1.343.6.11.1.3
The sequence number of the configuration policy of the client.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vlanPolicyMode		1.3.6.1.4.1.343.6.11.1.4
The device is running VLAN in 1 of 2 possible modes. 1) Distributed VLAN - the configuration and VLAN memberships are shared with other devices in the same domain. 2) Stand-alone - the configuration has only local significance. When running the devices in a stack the values 3 or 4 will be returned according to the actual mode, but only the values 1 and 2 will be accepted for set-requests. For some devices this object can not be set to fullVlan. Refer to vlanPolicySupportedVlanModes object.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	fullVlan(1), standalone(2), fullVlanForStack(3), standaloneForStack(4)

vlanPolicyChangedStamp		1.3.6.1.4.1.343.6.11.1.5
Local timestamp of last policy configuration change
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

vlanPolicyNextVlanId		1.3.6.1.4.1.343.6.11.1.6
Returns the next VLAN id to be used when creating a new VLAN
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vlanPolicyLastApiError		1.3.6.1.4.1.343.6.11.1.7
Return code for the last occurred error when making changes to the VLAN database
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	outOfMemory(1), tokenTakenByOther(2), editTokenNotAllocated(3), illegalVlanId(4), vlanAlreadyActive(5), vlanAlreadyDeactive(6), illegalIndex(7), illegalName(8), noDatabaseInFlash(9), illegalEntryId(10), optionUnknown(11), commandUnknown(12), entryAlreadyExist(13), recursiveReferencing(14), ipNetViolation(15), noVlansDefined(16), maximumNumberOfEntriesReached(17), nameTooLong(18), noIpNet(19), illegalPortEntry(20), moreEntriesExist(21), entryNotFound(22), saveError(25), noEntriesDefined(26), vlanNameAlreadyExist(27), domainUnknown(30), noLocalInfoPresent(31), illegalNvpDbPointer(32), illegalLocalPointer(33), wrongDatabaseVersion(34), errorInitializing(35), errorClearingDb(37), illegalPointer(38), macVlanServerTimeOut(40), editTokenLostToForcedRelease(41), configurationChanged(42), currentVersionTooOld(43), wrongDomainName(44), tokenClaimRequestAlreadyPending(45), tokenIsAlreadyAllocated(46), tokenAllocationTimeOut(47), tokenAllocatedForDbUpdate(48), serverIsLost(50), tokenReclaimFromNewServerFailed(51), vlanIdMismatch(52), multiStpChangeGlobalExist(53), multiStpChangeWrongVlanMode(54), multiStpChangePortOverlapping(55), notAllowedWhenRunningMultiStp(56)

vlanPolicyChangeOperation		1.3.6.1.4.1.343.6.11.1.8
This object must be set when changing the name of a VLAN DOMAIN, to indicate whether the change is a rename- or a create-operation
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	create(1), rename(2)

vlanPolicyVlanTable		1.3.6.1.4.1.343.6.11.1.9
Table of configured VLANs
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PolicyVlanEntry

policyVlanEntry		1.3.6.1.4.1.343.6.11.1.9.1
Entry in VLAN table consists of id and name and contains two special binary objects for creating and deleting VLANs
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PolicyVlanEntry

policyVlanId		1.3.6.1.4.1.343.6.11.1.9.1.1
The internal id number of a VLAN. Must be used as index for creating and deleting
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

policyVlanName		1.3.6.1.4.1.343.6.11.1.9.1.2
Name of the VLAN (20 bytes ASCII-Z string)
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..20)

policyVlanCreateObj		1.3.6.1.4.1.343.6.11.1.9.1.3
This object is used to create a new VLAN. The object takes parameters as binary-coded octet strings. Index (policyVlanId) used must be value from vlanPolicyNextVlanId. Binary format: [name (20 bytes ASCII-Z string)]
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..20)

policyVlanDeleteObj		1.3.6.1.4.1.343.6.11.1.9.1.4
This object is used to delete an existing VLAN. The id of the VLAN must be used as index
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	delete(1)

vlanPolicyMacRuleTable		1.3.6.1.4.1.343.6.11.1.10
Table of configured MAC rules in a VLAN
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PolicyMacRuleEntry

policyMacRuleEntry		1.3.6.1.4.1.343.6.11.1.10.1
Entry in MAC rule table consist of VLAN id and MAC address and contains two special binary objects for creating and deleting rules
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PolicyMacRuleEntry

policyMacRuleVlanId		1.3.6.1.4.1.343.6.11.1.10.1.1
Id of VLAN. Used as index when creating and deleting a rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

policyMacRuleAddress		1.3.6.1.4.1.343.6.11.1.10.1.2
MAC address string rule (6 bytes) for VLAN learning
Status: mandatory	Access: read-only
OBJECT-TYPE
	EthMacAddress	Size(6)

policyMacRuleCreateObj		1.3.6.1.4.1.343.6.11.1.10.1.3
This object is used to create a new MAC rule. The object takes parameters as binary-coded octet strings. Index (policyMacRuleVlanId and policyMacRuleAddress) used must be an existing VLAN id and a valid 6 byte MAC address. Binary format: [] {= leave empty}
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

policyMacRuleDeleteObj		1.3.6.1.4.1.343.6.11.1.10.1.4
This object is used to delete an existing MAC rule. The VLAN id and MAC address of the rule must be used as index
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	delete(1)

vlanPolicyIslMacRuleTable		1.3.6.1.4.1.343.6.11.1.11
THIS TABLE HAS BEEN OBSOLETED! Table of configured IslMAC rules in a VLAN
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PolicyIslMacRuleEntry

policyIslMacRuleEntry		1.3.6.1.4.1.343.6.11.1.11.1
THIS ENTRY HAS BEEN OBSOLETED! Entry in IslMAC rule table consists of VLAN id and IslMAC address and contains two special binary objects for creating and deleting rules
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PolicyIslMacRuleEntry

policyIslMacRuleVlanId		1.3.6.1.4.1.343.6.11.1.11.1.1
OBJECT HAS BEEN OBSOLETED! Id of VLAN. Used as index when creating and deleting a rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

policyIslMacRuleAddress		1.3.6.1.4.1.343.6.11.1.11.1.2
OBJECT HAS BEEN OBSOLETED! MAC address string rule (6 bytes) for VLAN learning
Status: mandatory	Access: read-only
OBJECT-TYPE
	EthMacAddress	Size(6)

policyIslMacRuleCreateObj		1.3.6.1.4.1.343.6.11.1.11.1.3
OBJECT HAS BEEN OBSOLETED! This object is used to create a new IslMAC rule. The object takes parameters as binary-coded octet strings. Index (policyIslMacRuleVlanId and policyIslMacRuleAddress) used must be an existing VLAN id and a valid 6 byte MAC address. Binary format: [] {= leave empty}
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

policyIslMacRuleDeleteObj		1.3.6.1.4.1.343.6.11.1.11.1.4
OBJECT HAS BEEN OBSOLETED! This object is used to delete an existing IslMAC rule. The VLAN id and MAC address of the rule must be used as index
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	delete(1)

vlanPolicyIpRuleTable		1.3.6.1.4.1.343.6.11.1.12
Table of configured IP rules in a VLAN
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PolicyIpRuleEntry

policyIpRuleEntry		1.3.6.1.4.1.343.6.11.1.12.1
Entry in IP rule table consists of VLAN id and IP address and contains two special binary objects for creating and deleting rules
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PolicyIpRuleEntry

policyIpRuleVlanId		1.3.6.1.4.1.343.6.11.1.12.1.1
Id of VLAN. Used as index when creating and deleting a rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

policyIpRuleAddress		1.3.6.1.4.1.343.6.11.1.12.1.2
IP address string rule (4 bytes) for VLAN learning
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

policyIpRuleCreateObj		1.3.6.1.4.1.343.6.11.1.12.1.3
This object is used to create a new IP rule. The object takes parameters as binary-coded octet strings. Index (policyIpRuleVlanId and policyIpRuleAddress) used must be an existing VLAN id and a valid 4 byte IP address. Binary format: [] {= leave empty}
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

policyIpRuleDeleteObj		1.3.6.1.4.1.343.6.11.1.12.1.4
This object is used to delete an existing IP rule. The VLAN id and IP address of the rule must be used as index
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	delete(1)

vlanPolicyIpNetRuleTable		1.3.6.1.4.1.343.6.11.1.13
Table of configured IP Network rules in a VLAN
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PolicyIpNetRuleEntry

policyIpNetRuleEntry		1.3.6.1.4.1.343.6.11.1.13.1
Entry in IP Network rule table consists of VLAN id, IP Network address and IP Network mask and contains two special binary objects for creating and deleting rules
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PolicyIpNetRuleEntry

policyIpNetRuleVlanId		1.3.6.1.4.1.343.6.11.1.13.1.1
Id of VLAN. Used as index when creating and deleting a rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

policyIpNetRuleAddress		1.3.6.1.4.1.343.6.11.1.13.1.2
IP Network address string rule (4 bytes) for VLAN learning
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

policyIpNetRuleMask		1.3.6.1.4.1.343.6.11.1.13.1.3
IP Network subnet mask string (4 bytes). Rule will be the result of a bit-wise AND operation between address and mask
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

policyIpNetRuleCreateObj		1.3.6.1.4.1.343.6.11.1.13.1.4
This object is used to create a new IP Network rule. The object takes parameters as binary-coded octet strings. Index (policyIpNetRuleVlanId and policyIpNetRuleAddress) used must be an existing VLAN id and a valid 4 byte IP address. Binary format: [mask (4bytes)]
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

policyIpNetRuleDeleteObj		1.3.6.1.4.1.343.6.11.1.13.1.5
This object is used to delete an existing IP Network rule. The VLAN id and IP Network address of the rule must be used as index
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	delete(1)

vlanPolicyPortRuleTable		1.3.6.1.4.1.343.6.11.1.14
Table of configured Port rules in a VLAN
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PolicyPortRuleEntry

policyPortRuleEntry		1.3.6.1.4.1.343.6.11.1.14.1
Entry in Port rule table consists of VLAN id and Port number and contains two special binary objects for creating and deleting rules
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PolicyPortRuleEntry

policyPortRuleVlanId		1.3.6.1.4.1.343.6.11.1.14.1.1
Id of VLAN. Used as index when creating and deleting a rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

policyPortRuleNumber		1.3.6.1.4.1.343.6.11.1.14.1.2
Port number rule for VLAN learning
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

policyPortRuleCreateObj		1.3.6.1.4.1.343.6.11.1.14.1.3
This object is used to create a new Port rule. The object takes parameters as binary-coded octet strings. Index (policyPortRuleVlanId and policyPortRuleAddress) used must be an existing VLAN id and a valid 4 byte IP address. Binary format: [] {= leave empty}
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

policyPortRuleDeleteObj		1.3.6.1.4.1.343.6.11.1.14.1.4
This object is used to delete an existing Port rule. The VLAN id and Port number of the rule must be used as index
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	delete(1)

vlanPolicyPortSettingsTable		1.3.6.1.4.1.343.6.11.1.15
List of ports and their VLAN relevant configuration
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PolicyPortSettingsEntry

policyPortSettingsEntry		1.3.6.1.4.1.343.6.11.1.15.1
Entry consists of Port Number and state for IP learning on a port
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PolicyPortSettingsEntry

policyPortSettingsPortNumber		1.3.6.1.4.1.343.6.11.1.15.1.1
This is the Port number. Used as index when changing settings
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

policyPortSettingsIpLearning		1.3.6.1.4.1.343.6.11.1.15.1.2
This option enables or disables the IP rule learning on a per port basis. This option should be enabled for ports connected to IP traffic only networks
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ipLearningDisabled(1), ipLearningEnabled(2)

vlanPolicyAllPortSettingsIpLearning		1.3.6.1.4.1.343.6.11.1.16
This object is used to synchronize IP learning settings for all ports (set to either enabled or disabled). When read this object will also indicate if the settings are the same for all ports (enabled or disabled) or mixed
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ipLearningDisabled(1), ipLearningEnabled(2), ipLearningMixed(3)

vlanPolicyAssignManagementVlan		1.3.6.1.4.1.343.6.11.1.17
Assign a VLAN to have access to the switch local management. NB: Only for desktop switches!
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

vlanPolicyConfigConfState		1.3.6.1.4.1.343.6.11.1.18
When a management center changes the VLAN configuration, there is a risk that it looses the access to the switch. Therefore, in case the switch is running VLAN in stand alone mode, a temporary backup of the old configuration is made. This copy is kept for 30 sec and if this object has not been set to confirm(5) within that time, the backup configuration is made active and the new modifications are lost (state will read revertedToOldConf(3)). When a Token is claimed the state is set to notReady(1) and the state cannot be set to confirm(5) until the state reads ready(2) (which means the configuration has been made active and the learning database updated). When setting state to confirm the backup is removed and the new configuration is made active, and the state reads confirmedNewConf(4).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	notReady(1), ready(2), revertedToOldConf(3), confirmedNewConf(4), confirm(5)

vlanPolicyConfigConfTimerValue		1.3.6.1.4.1.343.6.11.1.19
This object returns the start value of the Configuration Confirm Timer
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vlanPolicySupportedVlanModes		1.3.6.1.4.1.343.6.11.1.20
This object returns a bitmask containing the supported VLAN modes: 0x01 : Stand-alone VLAN 0x02 : Distributed VLAN
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vlanPolicyRevert2Default		1.3.6.1.4.1.343.6.11.1.21
Setting this object to 1 will restore the original VLAN setup (1 System VLAN with all ports in it). NB: vlanMode and name is not effected by this!
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

vlanPolicyMacVlanServerPriority		1.3.6.1.4.1.343.6.11.1.22
This object sets the priority for this device to become MAC-VLAN server
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

vlanPolicyAutoMoveMgtIpLink		1.3.6.1.4.1.343.6.11.1.23
If this object is enabled, the switch will make use of the feature to let Main IP link follow the management VlanId. Otherwise Main IP link will not move with the management Vlan
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	autoMoveMgtEnabled(1), autoMoveMgtDisabled(2)

vlanPolicyStackPortRuleTable		1.3.6.1.4.1.343.6.11.1.24
Table of configured Port rules in a VLAN for a stack
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PolicyStackPortRuleEntry

policyStackPortRuleEntry		1.3.6.1.4.1.343.6.11.1.24.1
Entry in Stack Port rule table consists of VLAN id, Switch MAC and Port number and contains two special binary objects for creating and deleting rules
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PolicyStackPortRuleEntry

policyStackPortRuleVlanId		1.3.6.1.4.1.343.6.11.1.24.1.1
Id of VLAN. Used as index when creating and deleting a rule
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

policyStackPortRuleSwitchMac		1.3.6.1.4.1.343.6.11.1.24.1.2
Mac address identifying the switch on which the port is physically located
Status: mandatory	Access: read-only
OBJECT-TYPE
	EthMacAddress	Size(6)

policyStackPortRuleNumber		1.3.6.1.4.1.343.6.11.1.24.1.3
Port number rule for VLAN learning
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

policyStackPortRuleCreateObj		1.3.6.1.4.1.343.6.11.1.24.1.4
This object is used to create a new Stack Port rule. The object takes parameters as binary-coded octet strings. Index (policyStackPortRuleVlanId, policyStackPortRuleSwitchMac and policyStackPortRuleAddress) used must be an existing VLAN id, a valid MAC address present in the stack and a valid 4 byte IP address. Binary format: [] {= leave empty}
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

policyStackPortRuleDeleteObj		1.3.6.1.4.1.343.6.11.1.24.1.5
This object is used to delete an existing Port rule. The VLAN id, Switch Mac and Port number of the rule must be used as index
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	delete(1)

vlanPolicyUseMultiSTP		1.3.6.1.4.1.343.6.11.1.25
When enabled, the device will operate multiple spanning trees on top of VLANs. When disabled the device will operate with VLANs on top of a single spanning tree.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

vlanPolicyFwdLearnPckts		1.3.6.1.4.1.343.6.11.1.26
Enable or Disable forwarding of learn-packets. A learn-packet is the packet that was used to learn a station the first time the switch received traffic from the station. If enabled these packets will be forwarded after learning is complete. If disabled these packets will be discarded after learning, to prevent packet re-ordering in the network. NB: This setting is not protected by the edit-token lock.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

vlanLearnedVersion		1.3.6.1.4.1.343.6.11.2.1
The version of the run-time database used for keeping actual VLAN information.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vlanLearnedServerState		1.3.6.1.4.1.343.6.11.2.2
State of the MAC-VLAN server: initActive - Initialising to become server initPassive - Initialising to become client passive - Station is client active - Station is server
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	initActive(1), initPassive(2), passive(3), active(4)

vlanLearnedServerPriority		1.3.6.1.4.1.343.6.11.2.3
The priority of the server function. The lower the priority, the more likely that this device becomes the server. If there is a tie between the priorities the device with the lowest MAC will become server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

vlanLearnedServerIPAddress		1.3.6.1.4.1.343.6.11.2.4
The IP address of the current MAC-VLAN server
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

vlanLearnedServerMACAddress		1.3.6.1.4.1.343.6.11.2.5
The MAC address of the current MAC-VLAN server
Status: mandatory	Access: read-only
OBJECT-TYPE
	EthMacAddress	Size(6)

vlanLearnedServerPortNo		1.3.6.1.4.1.343.6.11.2.6
The port number through which the device is connected to the server. Only valid if device is client
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

vlanLearnedServerNameChangeTimer		1.3.6.1.4.1.343.6.11.2.7
Timer value used when renaming a VLAN DOMAIN. While timer is running, both the old and new Domain Name is accepted by all switches in the Domain. When renaming a Domain containing many switches, a high value of the timer may be needed to ensure that Domain is not 'broken'. Value is in seconds
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

vlanLearnedServerExpiryTimer		1.3.6.1.4.1.343.6.11.2.8
Time a device will wait before assuming the MAC-VLAN server is lost. If server is assumed lost, the device will search for a new server, or become the server itself. NOTE: The value used by all devices in a Domain, is the value configured on the device that currently is the MAC-VLAN server and NOT the individual settings on each device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

vlanLearnedMacTable		1.3.6.1.4.1.343.6.11.2.9
A list of all active stations in a VLAN in the domain for the device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LearnedMacEntry

learnedMacEntry		1.3.6.1.4.1.343.6.11.2.9.1
A VLAN active station. For each station there is information about its: MAC address. If possible additional information about on which access-port the station is placed, the protocol type used and IP-address is kept too.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	LearnedMacEntry

learnedMacAddress		1.3.6.1.4.1.343.6.11.2.9.1.1
The MAC address for a station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	EthMacAddress	Size(6)

learnedMacType		1.3.6.1.4.1.343.6.11.2.9.1.2
The 2 byte protocol/length identifier specified in a ethernet packet according to IEEE802.3 / ETHERNET II
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

learnedMacPortNo		1.3.6.1.4.1.343.6.11.2.9.1.3
The access-port on the VLAN device for a learned station. If portNo = 0 it means that this MAC is not learned locally.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

learnedMacIpAddress		1.3.6.1.4.1.343.6.11.2.9.1.4
The IP-address of a learned station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

vlanLearnedMacVlanTable		1.3.6.1.4.1.343.6.11.2.10
A membership list of which stations are included in which VLANs in the actual domain.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LearnedMacVlanEntry

learnedMacVlanEntry		1.3.6.1.4.1.343.6.11.2.10.1
For every station (referred to by its MAC address) a list of VLANs that have the station as a member, can be retrieved.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	LearnedMacVlanEntry

learnedMacVlanMac		1.3.6.1.4.1.343.6.11.2.10.1.1
The MAC address of a learned station
Status: mandatory	Access: read-only
OBJECT-TYPE
	EthMacAddress	Size(6)

learnedMacVlanIndex		1.3.6.1.4.1.343.6.11.2.10.1.2
The index of this VLAN, to be used when retrieving the next VLAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

learnedMacVlanName		1.3.6.1.4.1.343.6.11.2.10.1.3
The name of the VLAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

vlanLearnedVlanPortTable		1.3.6.1.4.1.343.6.11.2.11
A table of which VLANs exist on the ports.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LearnedVlanPortEntry

learnedVlanPortEntry		1.3.6.1.4.1.343.6.11.2.11.1
For each port a list of VLANs that are active on the port can be retrieved.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	LearnedVlanPortEntry

learnedVlanPortNo		1.3.6.1.4.1.343.6.11.2.11.1.1
The if-index decribing the requested port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

learnedVlanPortVlanIndex		1.3.6.1.4.1.343.6.11.2.11.1.2
The index of this VLAN, to be used when retrieving the next VLAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

learnedVlanPortVlanName		1.3.6.1.4.1.343.6.11.2.11.1.3
The name of the VLAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

vlanLearnedVlanIdTable		1.3.6.1.4.1.343.6.11.2.12
Table of active VLAN id's
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LearnedVlanIdEntry

learnedVlanIdEntry		1.3.6.1.4.1.343.6.11.2.12.1
A VLAN is active in a device, if a station connected to that device has become a member of the VLAN.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	LearnedVlanIdEntry

learnedVlanId		1.3.6.1.4.1.343.6.11.2.12.1.1
The index of the VLAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

learnedVlanIdVlanName		1.3.6.1.4.1.343.6.11.2.12.1.2
The name of the VLAN.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

vlanLearnedSnmpMgtVlanIds		1.3.6.1.4.1.343.6.11.2.13
This object will return a list of VLAN id's for the incoming SNMP request, usable to determine which VLANs the Mgt station itself belongs to. The answer is an Octet-string consisting of 16-bit unsigned integers, up to a maximum of 127 id's. If more VLAN id's should exist, only the first 127 will be returned in the reply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

vlanLearnedMacVlanFlush		1.3.6.1.4.1.343.6.11.2.14
Setting this object to 1 will flush the MAC-VLAN table of the entire distributed domain.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

islTable		1.3.6.1.4.1.343.6.11.3.1
A list of interconnected VLAN aware devices sharing the same doamin on a port.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IslEntry

islEntry		1.3.6.1.4.1.343.6.11.3.1.1
On each switch vlan link a list of connected devices referred to by MAC- and IP-address.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IslEntry

islIfIndex		1.3.6.1.4.1.343.6.11.3.1.1.1
The if-index decribing the requested port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

islMacAddress		1.3.6.1.4.1.343.6.11.3.1.1.2
The MAC address of an SVL station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	EthMacAddress	Size(6)

islIpAddress		1.3.6.1.4.1.343.6.11.3.1.1.3
The IP-address of an SVL station
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

editTokenOwnerMacAddress		1.3.6.1.4.1.343.6.11.4.1
The MAC address of the station that is currently locking the global VLAN configuration.
Status: mandatory	Access: read-only
OBJECT-TYPE
	EthMacAddress	Size(6)

editTokenOwnerIpAddress		1.3.6.1.4.1.343.6.11.4.2
The IP-address of the station that is currently locking the global VLAN configuration.
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

editTokenOwnerSysName		1.3.6.1.4.1.343.6.11.4.3
The System Name of the station that is currently locking the global VLAN configuration.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

editTokenOwnerApplication		1.3.6.1.4.1.343.6.11.4.4
The Application that is currently locking the global VLAN configuration.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	localManagement(1), snmp(2), nvpdbTftp(3), serverUpdate(4), externalTftpGet(5), externalTftpPut(6), loadFromFlash(7)

editTokenOwnerSnmpIpAddress		1.3.6.1.4.1.343.6.11.4.5
The IP address of the IP host that has taken the edit token via SNMP
Status: mandatory	Access: read-only
OBJECT-TYPE
	IpAddress

editTokenClaimReq		1.3.6.1.4.1.343.6.11.4.6
This object is used to claim the Token to make changes to the VLAN configuration. Parameters are supplied in a binary coded octet string. Request will fail if sequence number given is lower than or equal to active configuration sequence number. Binary format: [] seqNo = sequence number expected to be next suggestNewSeqNo = if 1 device will assign allocForSNMP = if editing from SNMP set to 1
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(6)

editTokenLastClaimRspRetVal		1.3.6.1.4.1.343.6.11.4.7
Returns the last error code for the Claim Edit Token call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	success(1), failTaken(2), failVersionTooOld(3), failWrongDomainName(4), notReady(99), failClaiming(100), failTakenThisSwitch(101), failReqTimeout(102), failGetBuffer(103), failUpdating(104), failNotReady(105)

editTokenReleaseReq		1.3.6.1.4.1.343.6.11.4.8
Object used to release the Token. When setting object an integer indicating 1) Abandon changes, 2) Save changes, 3) Save changes and wait for confirmation (if not confirmed the device returns to the previous configuration) must be given or 4) we are changing VLAN mode/name and want to have our System VLAN (id=24) back, to ensure correct connectivity after the change
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	noSave(1), save(2), saveWithConfirmOption(3), modeChangeRestoreDefault(4)

editTokenLastReleaseRspRetVal		1.3.6.1.4.1.343.6.11.4.9
Returns the last error code for the Release Edit Token call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	success(1), failNotTaken(2), failNotOwner(3), failReplacing(4), notReady(99), failClaiming(100), failReqTimeout(101), failForceReleased(102), failReleasing(104), failSaving(105), failNotTakenThisAppl(106), failLocalError(107), failNotReady(108)

editTokenForceReleaseReq		1.3.6.1.4.1.343.6.11.4.10
A forced release of the edit token can be issued by an IP host via SNMP by setting this object on the MVS.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

editTokenClientState		1.3.6.1.4.1.343.6.11.4.11
The edit token state of the client
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notTaken(1), taken(2), claiming(3), releasing(4), reclaiming(5), expectingNewNvpdb(6)

editTokenTakenTime		1.3.6.1.4.1.343.6.11.4.12
The time that the edit token has been allocated (in hundreds of a second)
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

editTokenLastForceReleaseRspRetVal		1.3.6.1.4.1.343.6.11.4.13
Returns the last error code for the Release Edit Token call.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	success(1), timeout(2), notTaken(3), inProgress(4), notReady(99)

editTokenServerState		1.3.6.1.4.1.343.6.11.4.14
The edit token state of the server.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	notTaken(1), releasing(2), taken(3), forceReleasing(4)

previousVlanDomainName		1.3.6.1.4.1.343.6.11.6.1
Internal value used when sending SNMP traps
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(0..8)

vlanParsingErrorNo		1.3.6.1.4.1.343.6.11.6.2
Internal value used when sending SNMP traps
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

vlanParsingErrorText		1.3.6.1.4.1.343.6.11.6.3
Internal value used when sending SNMP traps
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(0..255)

originatorIpAddress		1.3.6.1.4.1.343.6.11.6.4
Internal value used when sending SNMP traps
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpAddress

originatorMacAddress		1.3.6.1.4.1.343.6.11.6.5
Internal value used when sending SNMP traps
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	EthMacAddress	Size(6)

originatorSysName		1.3.6.1.4.1.343.6.11.6.6
Internal value used when sending SNMP traps
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(0..255)

originatorMgtStationIpAddress		1.3.6.1.4.1.343.6.11.6.7
Internal value used when sending SNMP traps
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	IpAddress

globalVlanConfigurationChange		1
A new VLAN configuration has been distributed.
TRAP-TYPE

localConfigurationChange		2
Changes made to local VLAN configuration.
TRAP-TYPE

invalidVlanConfiguration		3
Error in uploaded configuration.
TRAP-TYPE

domainNameChange		5
The VLAN domain name has been changed.
TRAP-TYPE

newSwitchInDomain		6
This station is now participating in the domain.
TRAP-TYPE

missingSwitchInDomain		7
A switch is no longer in the domain.
TRAP-TYPE

editTokenForceRelease		8
This station has made a forced release of the edit token for the VLAN configuration
TRAP-TYPE

editTokenRequestFailed		9
A management station tried to allocate the token while it was not available.
TRAP-TYPE

configConfirmFailed		10
The new configuration rendered the device inaccessible to the management station, and the old configuration has been restored.
TRAP-TYPE

vlanLearnedDatabaseFull		11
The VLAN learning process was unable to insert an entry in the VLAN database. This may result in a loss of connectivity between some stations. This is not an error; the setup is larger than the system has been designed to handle.
TRAP-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor