IPAD-ATM-MIB

File: IPAD-ATM-MIB.mib (52810 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IPADv2-MIB

Imported symbols

IpAddress TimeTicks OBJECT-TYPE
MODULE-IDENTITY DisplayString ipad

Defined Types

IpadAtmTableEntry  
SEQUENCE    
  ipadAtmIfIndex INTEGER
  ipadAtmOperStatus INTEGER
  ipadAtmVccsOpenedOK INTEGER
  ipadAtmVccsNotOpened INTEGER
  ipadAtmAlarmReset INTEGER
  ipadAtmOverSubscriptionFactor INTEGER
  ipadAtmLineBandwidth INTEGER
  ipadAtmAAL5Bandwidth INTEGER
  ipadAtmOverSubBandwidth INTEGER
  ipadAtmCbrUsedBandwidth INTEGER
  ipadAtmVbrUsedBandwidth INTEGER
  ipadAtmUbrUsedBandwidth INTEGER
  ipadAtmQos0Pcr INTEGER

IpadAtmStatsTableEntry  
SEQUENCE    
  ipadAtmStatsIndex INTEGER
  ipadAtmStatsPeriodIndex INTEGER
  ipadAtmStatsTimeStamp TimeTicks
  ipadAtmStatsRxFramesOK INTEGER
  ipadAtmStatsTxFramesOK INTEGER
  ipadAtmStatsRxFramesError INTEGER
  ipadAtmStatsTxFramesError INTEGER
  ipadAtmStatsRxBytesOK INTEGER
  ipadAtmStatsTxBytesOK INTEGER
  ipadAtmStatsLostSync INTEGER
  ipadAtmStatsOamCellsRx INTEGER
  ipadAtmStatsOamCellsTx INTEGER

IpadAtmVccTableEntry  
SEQUENCE    
  ipadAtmVccIndex INTEGER
  ipadAtmVccVpiIndex INTEGER
  ipadAtmVccVciIndex INTEGER
  ipadAtmVccEncapsulationType INTEGER
  ipadAtmVccTrafficType INTEGER
  ipadAtmVccChannelRate INTEGER
  ipadAtmVccAlarmReset INTEGER
  ipadAtmVccSLATimer INTEGER
  ipadAtmVccRemoteFramesOffered INTEGER
  ipadAtmVccFramesReceived INTEGER
  ipadAtmVccRemoteDataOffered INTEGER
  ipadAtmVccDataReceived INTEGER
  ipadAtmVccRemoteActive INTEGER
  ipadAtmVccRemoteVpi INTEGER
  ipadAtmVccRemoteVci INTEGER
  ipadAtmVccRemoteIPAddress IpAddress
  ipadAtmVccRemoteUnitId DisplayString
  ipadAtmVccEtoeLoopbackCommand INTEGER
  ipadAtmVccEtoeLoopbackState INTEGER
  ipadAtmVccEtoeLoopbackCellsTx INTEGER
  ipadAtmVccEtoeLoopbackCellsRx INTEGER
  ipadAtmVccEtoeLoopbackRttMin INTEGER
  ipadAtmVccEtoeLoopbackRttMax INTEGER
  ipadAtmVccEtoeLoopbackRttAvg INTEGER
  ipadAtmVccSegLoopbackCommand INTEGER
  ipadAtmVccSegLoopbackState INTEGER
  ipadAtmVccSegLoopbackCellsTx INTEGER
  ipadAtmVccSegLoopbackCellsRx INTEGER
  ipadAtmVccSegLoopbackRttMin INTEGER
  ipadAtmVccSegLoopbackRttMax INTEGER
  ipadAtmVccSegLoopbackRttAvg INTEGER
  ipadAtmVccEtoeContCheckCommand INTEGER
  ipadAtmVccEtoeContCheckAutoActivate INTEGER
  ipadAtmVccEtoeContCheckType INTEGER
  ipadAtmVccEtoeContCheckTypeInUse INTEGER
  ipadAtmVccEtoeContCheckStatus INTEGER
  ipadAtmVccEtoeContCheckCellsTx INTEGER
  ipadAtmVccEtoeContCheckCellsRx INTEGER
  ipadAtmVccEtoeAisStatus INTEGER
  ipadAtmVccEtoeRdiStatus INTEGER

IpadAtmVccStatsTableEntry  
SEQUENCE    
  ipadAtmVccStatsIndex INTEGER
  ipadAtmVccStatsVpiIndex INTEGER
  ipadAtmVccStatsVciIndex INTEGER
  ipadAtmVccStatsPeriodIndex INTEGER
  ipadAtmVccStatsTimeStamp TimeTicks
  ipadAtmVccStatsRxFramesOK INTEGER
  ipadAtmVccStatsTxFramesOK INTEGER
  ipadAtmVccStatsRxFramesError INTEGER
  ipadAtmVccStatsTxFramesError INTEGER
  ipadAtmVccStatsRxFramesCLP INTEGER
  ipadAtmVccStatsRxFramesCI INTEGER
  ipadAtmVccStatsRxFramesAbort INTEGER
  ipadAtmVccStatsRxFramesLenViolation INTEGER
  ipadAtmVccStatsRxFramesCRCError INTEGER
  ipadAtmVccStatsRxFramesTimeout INTEGER
  ipadAtmVccStatsRxFramesHCSError INTEGER
  ipadAtmVccStatsRxFramesNoBuffer INTEGER
  ipadAtmVccStatsRxCellsOK INTEGER
  ipadAtmVccStatsTxCellsOK INTEGER
  ipadAtmVccStatsRxBytesOK INTEGER
  ipadAtmVccStatsTxBytesOK INTEGER
  ipadAtmVccStatsDelayPeak INTEGER
  ipadAtmVccStatsDelayAverage INTEGER
  ipadAtmVccStatsRoundTripTimeouts INTEGER
  ipadAtmVccStatsRemoteFramesOffered INTEGER
  ipadAtmVccStatsFramesReceived INTEGER
  ipadAtmVccStatsFDR DisplayString
  ipadAtmVccStatsRemoteDataOffered INTEGER
  ipadAtmVccStatsDataReceived INTEGER
  ipadAtmVccStatsDDR DisplayString
  ipadAtmVccStatsUAS INTEGER

IpadAtmCesTableEntry  
SEQUENCE    
  ipadAtmCesIndex INTEGER
  ipadAtmCesPayloadScrambling INTEGER
  ipadAtmCesAutoChannelConfiguration INTEGER

IpadAtmFrf5SvcTableEntry  
SEQUENCE    
  ipadAtmFrf5SvcIfIndex INTEGER
  ipadAtmFrf5SvcVpiIndex INTEGER
  ipadAtmFrf5SvcVciIndex INTEGER
  ipadAtmFrf5SvcDeToClpMappingMode INTEGER
  ipadAtmFrf5SvcClpToDeMappingMode INTEGER
  ipadAtmFrf5SvcN1 INTEGER
  ipadAtmFrf5SvcN2 INTEGER
  ipadAtmFrf5SvcN3 INTEGER
  ipadAtmFrf5SvcT1 INTEGER
  ipadAtmFrf5SvcT2 INTEGER
  ipadAtmFrf5SvcActive INTEGER
  ipadAtmFrf5SvcAddDLCI INTEGER
  ipadAtmFrf5SvcDeleteDLCI INTEGER

IpadAtmFrf5DlciTableEntry  
SEQUENCE    
  ipadAtmFrf5DlciIfIndex INTEGER
  ipadAtmFrf5DlciVpiIndex INTEGER
  ipadAtmFrf5DlciVciIndex INTEGER
  ipadAtmFrf5DlciIndex INTEGER
  ipadAtmFrf5DlciEndpointName DisplayString
  ipadAtmFrf5DlciStatus INTEGER
  ipadAtmFrf5DlciCongestion INTEGER

IpadAtmFrf8SvcTableEntry  
SEQUENCE    
  ipadAtmFrf8SvcIfIndex INTEGER
  ipadAtmFrf8SvcVpiIndex INTEGER
  ipadAtmFrf8SvcVciIndex INTEGER
  ipadAtmFrf8SvcDeToClpMappingMode INTEGER
  ipadAtmFrf8SvcClpToDeMappingMode INTEGER
  ipadAtmFrf8SvcCongestionMappingMode INTEGER
  ipadAtmFrf8SvcEncapsulationMappingMode INTEGER
  ipadAtmFrf8SvcEndpointName DisplayString

Defined Values

ipadAtm 1.3.6.1.4.1.321.100.1.25
The IPAD ATM MIB.
MODULE-IDENTITY    

ipadAtmParms 1.3.6.1.4.1.321.100.1.25.1
OBJECT IDENTIFIER    

ipadAtmStatsParms 1.3.6.1.4.1.321.100.1.25.2
OBJECT IDENTIFIER    

ipadAtmVccParms 1.3.6.1.4.1.321.100.1.25.3
OBJECT IDENTIFIER    

ipadAtmVccStatsParms 1.3.6.1.4.1.321.100.1.25.4
OBJECT IDENTIFIER    

ipadAtmCesParms 1.3.6.1.4.1.321.100.1.25.5
OBJECT IDENTIFIER    

ipadAtmFrParms 1.3.6.1.4.1.321.100.1.25.6
OBJECT IDENTIFIER    

ipadAtmTable 1.3.6.1.4.1.321.100.1.25.1.1
Table of ATM parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadAtmTableEntry

ipadAtmTableEntry 1.3.6.1.4.1.321.100.1.25.1.1.1
An entry in the ipad ATM parameter table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadAtmTableEntry  

ipadAtmIfIndex 1.3.6.1.4.1.321.100.1.25.1.1.1.1
The index into the ATM table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmOperStatus 1.3.6.1.4.1.321.100.1.25.1.1.1.2
The up/down status of this atm interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), down(2), upNoCellSync(3), upCellSync(4)  

ipadAtmVccsOpenedOK 1.3.6.1.4.1.321.100.1.25.1.1.1.3
The current number of successfully opened VCCs on this ATM interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccsNotOpened 1.3.6.1.4.1.321.100.1.25.1.1.1.4
The current number of VCCs that were not successfully opened on this ATM interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmAlarmReset 1.3.6.1.4.1.321.100.1.25.1.1.1.5
Reset the alarms or statistics of this ATM interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), clearAlarms(2), clearStats(3)  

ipadAtmOverSubscriptionFactor 1.3.6.1.4.1.321.100.1.25.1.1.1.6
The current over-subscription-factor for this ATM interface. Used for VBR and UBR VC connection admission control to allow the either VBR or UBR service category connections to collectively use more bandwidth than is available in order to make use of the statistical multiplexing of the connections. The PCR of each individual VC is limited to the interface's line rate. However when multiple VCs are configured, the sum of their PCR values can go up to (OverSubscriptionFactor * (line-rate) / 53*8). A value of 1 indicates no oversubscription allowed. A value of 5 indicates 5 times oversubscription allowed. Note that CBR connections cannot be oversubscribed. Also, if CES is in use on the interface, all AAL5 connections have their PCR limited to the amount which the line rate can support above the commitment for CES, and the oversubscription applies only to that bandwidth above the CES commitment.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

ipadAtmLineBandwidth 1.3.6.1.4.1.321.100.1.25.1.1.1.7
The current ATM Line interface Bandwidth in cells per second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmAAL5Bandwidth 1.3.6.1.4.1.321.100.1.25.1.1.1.8
The current AAL5 Bandwidth in cells per second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmOverSubBandwidth 1.3.6.1.4.1.321.100.1.25.1.1.1.9
The AAL5 Oversubscription Bandwidth in cells per second. This value is ipadAtmAAL5Bandwidth multiplied by the ipadAtmOversubscriptionFactor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmCbrUsedBandwidth 1.3.6.1.4.1.321.100.1.25.1.1.1.10
The amount of AAL5 Bandwidth allocated to CBR VCs in cells per second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVbrUsedBandwidth 1.3.6.1.4.1.321.100.1.25.1.1.1.11
The amount of AAL5 Bandwidth allocated to VBR VCs in cells per second. When OversubscriptionFactor is greater than 1, this value can exceed ipadAtmAAL5Bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmUbrUsedBandwidth 1.3.6.1.4.1.321.100.1.25.1.1.1.12
The amount of AAL5 Bandwidth allocated to UBR VCs in cells per second. When OversubscriptionFactor is greater than 1, this value can exceed ipadAtmAAL5Bandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmQos0Pcr 1.3.6.1.4.1.321.100.1.25.1.1.1.13
The value of PCR to be used for each VC which has no specified QOS profile (0). The VC is configured as UBR with the given Peak Cell Rate.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsTable 1.3.6.1.4.1.321.100.1.25.2.1
Table of ATM statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadAtmStatsTableEntry

ipadAtmStatsTableEntry 1.3.6.1.4.1.321.100.1.25.2.1.1
An entry in the ipad ATM Stats parameter table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadAtmStatsTableEntry  

ipadAtmStatsIndex 1.3.6.1.4.1.321.100.1.25.2.1.1.1
The index representing the ATM interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsPeriodIndex 1.3.6.1.4.1.321.100.1.25.2.1.1.2
The index representing the period for the ATM stats entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsTimeStamp 1.3.6.1.4.1.321.100.1.25.2.1.1.3
The value of sysUpTime the last time the statistics were updated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadAtmStatsRxFramesOK 1.3.6.1.4.1.321.100.1.25.2.1.1.4
The number of error-free frames received during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsTxFramesOK 1.3.6.1.4.1.321.100.1.25.2.1.1.5
The number of frames successfully transmitted during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsRxFramesError 1.3.6.1.4.1.321.100.1.25.2.1.1.6
The number of errored frames received during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsTxFramesError 1.3.6.1.4.1.321.100.1.25.2.1.1.7
The number of transmitted frames that were errored.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsRxBytesOK 1.3.6.1.4.1.321.100.1.25.2.1.1.8
The number of error-free bytes received during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsTxBytesOK 1.3.6.1.4.1.321.100.1.25.2.1.1.9
The number of successfully transmitted bytes during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsLostSync 1.3.6.1.4.1.321.100.1.25.2.1.1.10
The number of times sync has been lost or recovered.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsOamCellsRx 1.3.6.1.4.1.321.100.1.25.2.1.1.11
The number of OAM cells received on this ATM link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmStatsOamCellsTx 1.3.6.1.4.1.321.100.1.25.2.1.1.12
The number of OAM cells transmitted on this ATM link.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccTable 1.3.6.1.4.1.321.100.1.25.3.1
Table of Virtual Channel parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadAtmVccTableEntry

ipadAtmVccTableEntry 1.3.6.1.4.1.321.100.1.25.3.1.1
An entry in the ipad ATM Vcc parameter table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadAtmVccTableEntry  

ipadAtmVccIndex 1.3.6.1.4.1.321.100.1.25.3.1.1.1
The index into the ATM VCC table, corresponding to ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccVpiIndex 1.3.6.1.4.1.321.100.1.25.3.1.1.2
The VPI for the VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccVciIndex 1.3.6.1.4.1.321.100.1.25.3.1.1.3
The VCI for the VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccEncapsulationType 1.3.6.1.4.1.321.100.1.25.3.1.1.4
The encapsulation method used on this VCC. vcMux indicates null encapsulation and may be used for IP routing or PPP applications. llcMux indicates LLC encapsulation and may be used for IP routing, bridging, and PPP applications. serialPPPoA and serialHDLCoA indicate serial port applications.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), serialPPPoA(2), vcMux(3), llcMux(4), serialHDLCoA(5), frf5(6), frf8(7)  

ipadAtmVccTrafficType 1.3.6.1.4.1.321.100.1.25.3.1.1.5
The traffic type of this VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), cbr(2), rtVbr(3), nrtVbr(4), abr(5), ubr(6)  

ipadAtmVccChannelRate 1.3.6.1.4.1.321.100.1.25.3.1.1.6
The channel rate for this VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccAlarmReset 1.3.6.1.4.1.321.100.1.25.3.1.1.7
Reset the alarms or statistics of this VCC.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), clearAlarms(2), clearStats(3)  

ipadAtmVccSLATimer 1.3.6.1.4.1.321.100.1.25.3.1.1.8
The time in seconds between SLA measurement packets being sent.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadAtmVccRemoteFramesOffered 1.3.6.1.4.1.321.100.1.25.3.1.1.9
The number of frames offered by the remote device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccFramesReceived 1.3.6.1.4.1.321.100.1.25.3.1.1.10
The number of frames received by this device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccRemoteDataOffered 1.3.6.1.4.1.321.100.1.25.3.1.1.11
The number of data bytes offered by the remote device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccDataReceived 1.3.6.1.4.1.321.100.1.25.3.1.1.12
The number of data bytes received by this device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccRemoteActive 1.3.6.1.4.1.321.100.1.25.3.1.1.13
The current state of the remote device as detected by the local device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), inactive(2), active(3)  

ipadAtmVccRemoteVpi 1.3.6.1.4.1.321.100.1.25.3.1.1.14
The remote VPI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccRemoteVci 1.3.6.1.4.1.321.100.1.25.3.1.1.15
The remote VCI.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccRemoteIPAddress 1.3.6.1.4.1.321.100.1.25.3.1.1.16
The IP Address of the device connected to the remote end of this VCC.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ipadAtmVccRemoteUnitId 1.3.6.1.4.1.321.100.1.25.3.1.1.17
The Unit ID assigned to the devie connected to the remote end of this VCC.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ipadAtmVccEtoeLoopbackCommand 1.3.6.1.4.1.321.100.1.25.3.1.1.18
A command to issue on the VCC Loopback. The start command is used to start an OAM F5 VCC loopback. The stop command is used to terminate the OAM loopback. The statistics variables associated with the OAM loopback are automatically cleared when a loopback is started.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), start(2), stop(3)  

ipadAtmVccEtoeLoopbackState 1.3.6.1.4.1.321.100.1.25.3.1.1.19
The state of this VCC loopback function. The active state means OAM F5 loopback cells are being sent from this endpoint once every 5 seconds. The loopback state means that OAM F5 loopback cells are being received and returned from this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2), loopback(3)  

ipadAtmVccEtoeLoopbackCellsTx 1.3.6.1.4.1.321.100.1.25.3.1.1.20
The number of OAM F5 Loopback cells transmitted for this VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccEtoeLoopbackCellsRx 1.3.6.1.4.1.321.100.1.25.3.1.1.21
The number of OAM F5 Loopback cells received for this VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccEtoeLoopbackRttMin 1.3.6.1.4.1.321.100.1.25.3.1.1.22
The minimum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccEtoeLoopbackRttMax 1.3.6.1.4.1.321.100.1.25.3.1.1.23
The maximum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccEtoeLoopbackRttAvg 1.3.6.1.4.1.321.100.1.25.3.1.1.24
The average round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccSegLoopbackCommand 1.3.6.1.4.1.321.100.1.25.3.1.1.25
A command to issue on the VCC Loopback. The start command is used to start an OAM F5 VCC loopback. The stop command is used to terminate the OAM loopback. The statistics variables associated with the OAM loopback are automatically cleared when a loopback is started.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), start(2), stop(3)  

ipadAtmVccSegLoopbackState 1.3.6.1.4.1.321.100.1.25.3.1.1.26
The state of this VCC loopback function. The active state means OAM F5 loopback cells are being sent from this endpoint once every 5 seconds. The loopback state means that OAM F5 loopback cells are being received and returned from this endpoint.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), active(2), loopback(3)  

ipadAtmVccSegLoopbackCellsTx 1.3.6.1.4.1.321.100.1.25.3.1.1.27
The number of OAM F5 Loopback cells transmitted for this VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccSegLoopbackCellsRx 1.3.6.1.4.1.321.100.1.25.3.1.1.28
The number of OAM F5 Loopback cells received for this VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccSegLoopbackRttMin 1.3.6.1.4.1.321.100.1.25.3.1.1.29
The minimum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccSegLoopbackRttMax 1.3.6.1.4.1.321.100.1.25.3.1.1.30
The maximum round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccSegLoopbackRttAvg 1.3.6.1.4.1.321.100.1.25.3.1.1.31
The average round trip time in milliseconds between sending a loopback cell and receiving the returned loopback cell.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccEtoeContCheckCommand 1.3.6.1.4.1.321.100.1.25.3.1.1.32
ipadAtmVccEtoeContCheckCommand is used to request activation or deactivation of the End-to-End continuity check on this VCC.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), activate(2), deactivate(3)  

ipadAtmVccEtoeContCheckAutoActivate 1.3.6.1.4.1.321.100.1.25.3.1.1.33
ipadAtmVccEtoeContCheckAutoActivate indicates whether End-to-End continuity check is automatically activated on this VCC. A Value of disable means CC is not automatically activated. A value of enable permits CC to be automatically activated after the VCC connection is established.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadAtmVccEtoeContCheckType 1.3.6.1.4.1.321.100.1.25.3.1.1.34
Default Continuity Check Type used for this VCC. A value of none selects no continuity check. A value of sink, source, or sinkAndSource selects the respective continuity check functions. ipadAtmVccEtoeContCheckType can only be changed when CC is not currently active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), sink(2), source(3), sinkAndSource(4)  

ipadAtmVccEtoeContCheckTypeInUse 1.3.6.1.4.1.321.100.1.25.3.1.1.35
The current Continuity Check Type in use for this VCC. ipadAtmVccEtoeContCheckTypeInUse may differ from ipadAtmVccEtoeContCheckType if CC is activated via inband OAM.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), sink(2), source(3), sinkAndSource(4)  

ipadAtmVccEtoeContCheckStatus 1.3.6.1.4.1.321.100.1.25.3.1.1.36
The current state of Continuity Check for this VCC. In the ready state, no CC is being performed. The ready state indicates CC is permitted to be activated. The activating state indicates CC has been requested and is being activated. During activation, an OAM activation cell is sent to the opposite endpoint to request CC. Once an activation confirmed cell is received, the state is then changed to active. Reception of an activation denied response or a multiple of 3 ten-second time outs waiting for a confirmation will result in an activationFailed state. CC sourcing is performed when state is active or activating. CC sinking is performed when state is active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), active(2), activationFailed(3), activating(4), deactivating(5)  

ipadAtmVccEtoeContCheckCellsTx 1.3.6.1.4.1.321.100.1.25.3.1.1.37
The number of CC cells transmitted for this VCC for CC Sourcing function.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccEtoeContCheckCellsRx 1.3.6.1.4.1.321.100.1.25.3.1.1.38
The number of CC cells received for this VCC for the CC Sinking function.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccEtoeAisStatus 1.3.6.1.4.1.321.100.1.25.3.1.1.39
The current e-t-e_VC-AIS state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noAis(1), ais(2)  

ipadAtmVccEtoeRdiStatus 1.3.6.1.4.1.321.100.1.25.3.1.1.40
The current e-t-e_VC-RDI state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER noRdi(1), rdi(2)  

ipadAtmVccStatsTable 1.3.6.1.4.1.321.100.1.25.4.1
Table of ATM statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadAtmVccStatsTableEntry

ipadAtmVccStatsTableEntry 1.3.6.1.4.1.321.100.1.25.4.1.1
An entry in the ipad ATM VccStats parameter table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadAtmVccStatsTableEntry  

ipadAtmVccStatsIndex 1.3.6.1.4.1.321.100.1.25.4.1.1.1
The index representing the ATM interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsVpiIndex 1.3.6.1.4.1.321.100.1.25.4.1.1.2
The index representing the VPI of the VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsVciIndex 1.3.6.1.4.1.321.100.1.25.4.1.1.3
The index representing the VCI of the VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsPeriodIndex 1.3.6.1.4.1.321.100.1.25.4.1.1.4
The index representing the period for the VCC stats entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsTimeStamp 1.3.6.1.4.1.321.100.1.25.4.1.1.5
The value of sysUpTime the last time the statistics were updated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ipadAtmVccStatsRxFramesOK 1.3.6.1.4.1.321.100.1.25.4.1.1.6
The number of error-free frames received this period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsTxFramesOK 1.3.6.1.4.1.321.100.1.25.4.1.1.7
The number of frames successfully transmitted during this period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxFramesError 1.3.6.1.4.1.321.100.1.25.4.1.1.8
The number of errored frames received this period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsTxFramesError 1.3.6.1.4.1.321.100.1.25.4.1.1.9
The number of frames that were not successfully transmitted during this period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxFramesCLP 1.3.6.1.4.1.321.100.1.25.4.1.1.10
The number of frames received with CLP set during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxFramesCI 1.3.6.1.4.1.321.100.1.25.4.1.1.11
The number of frames received with congestion set during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxFramesAbort 1.3.6.1.4.1.321.100.1.25.4.1.1.12
The number of frames whose reception was aborted during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxFramesLenViolation 1.3.6.1.4.1.321.100.1.25.4.1.1.13
The number of frames received with a length violation during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxFramesCRCError 1.3.6.1.4.1.321.100.1.25.4.1.1.14
The number of frames received with CRC errors during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxFramesTimeout 1.3.6.1.4.1.321.100.1.25.4.1.1.15
The number of frames whose reception timed out during the period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxFramesHCSError 1.3.6.1.4.1.321.100.1.25.4.1.1.16
The number of frames received with an HCS error in a cell.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxFramesNoBuffer 1.3.6.1.4.1.321.100.1.25.4.1.1.17
The number of frames discarded due to the lack of buffers.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxCellsOK 1.3.6.1.4.1.321.100.1.25.4.1.1.18
The number of cells successfully received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsTxCellsOK 1.3.6.1.4.1.321.100.1.25.4.1.1.19
The number of cells successfully transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRxBytesOK 1.3.6.1.4.1.321.100.1.25.4.1.1.20
The number of bytes successfully received.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsTxBytesOK 1.3.6.1.4.1.321.100.1.25.4.1.1.21
The number of bytes successfully transmitted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsDelayPeak 1.3.6.1.4.1.321.100.1.25.4.1.1.22
The peak delay measured during this period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsDelayAverage 1.3.6.1.4.1.321.100.1.25.4.1.1.23
The average delay measured during this period.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRoundTripTimeouts 1.3.6.1.4.1.321.100.1.25.4.1.1.24
The number of round trip delay message timeouts measured.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsRemoteFramesOffered 1.3.6.1.4.1.321.100.1.25.4.1.1.25
The number of frames offered by the remote device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsFramesReceived 1.3.6.1.4.1.321.100.1.25.4.1.1.26
The number of frames received by the local device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsFDR 1.3.6.1.4.1.321.100.1.25.4.1.1.27
The calculated frame delivery ratio.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ipadAtmVccStatsRemoteDataOffered 1.3.6.1.4.1.321.100.1.25.4.1.1.28
The number of data bytes offered by the remote device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsDataReceived 1.3.6.1.4.1.321.100.1.25.4.1.1.29
The number of data bytes received by the local device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmVccStatsDDR 1.3.6.1.4.1.321.100.1.25.4.1.1.30
The calculated data delivery ratio.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ipadAtmVccStatsUAS 1.3.6.1.4.1.321.100.1.25.4.1.1.31
The number of seconds which the remote device was unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmCesTable 1.3.6.1.4.1.321.100.1.25.5.1
Table of CES parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadAtmCesTableEntry

ipadAtmCesTableEntry 1.3.6.1.4.1.321.100.1.25.5.1.1
An entry in the ipad ATM CES parameter table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadAtmCesTableEntry  

ipadAtmCesIndex 1.3.6.1.4.1.321.100.1.25.5.1.1.1
The index into the ATM CES table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmCesPayloadScrambling 1.3.6.1.4.1.321.100.1.25.5.1.1.2
ipadAtmCesPayloadScrambling indicates whether CES payload scrambling is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadAtmCesAutoChannelConfiguration 1.3.6.1.4.1.321.100.1.25.5.1.1.3
ipadAtmCesAutoChannelConfiguration indicates whether the CES channel configuration should be dynamic based on available line bandwidth.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER other(1), disable(2), enable(3)  

ipadAtmFrf5SvcTable 1.3.6.1.4.1.321.100.1.25.6.1
Table of ATM FRF5 profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadAtmFrf5SvcTableEntry

ipadAtmFrf5SvcTableEntry 1.3.6.1.4.1.321.100.1.25.6.1.1
An entry in the ipad ATM FRF5 service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadAtmFrf5SvcTableEntry  

ipadAtmFrf5SvcIfIndex 1.3.6.1.4.1.321.100.1.25.6.1.1.1
The index representing the ATM interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf5SvcVpiIndex 1.3.6.1.4.1.321.100.1.25.6.1.1.2
The index representing the VPI of the VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf5SvcVciIndex 1.3.6.1.4.1.321.100.1.25.6.1.1.3
The index representing the VCI of the VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf5SvcDeToClpMappingMode 1.3.6.1.4.1.321.100.1.25.6.1.1.4
Discard Eligibility to Cell Loss Priority mapping mode. mode1: The Discard Eligibility (DE) field in the Q.922 core frame shall be copied unchanged into the DE field in the FR-SSCS PDU header and mapped to the ATM Cell Loss Priority (CLP) of every ATM cell generated by the segmentation process of that frame. mode2Const0: The DE field in the Q.922 core frame shall be copied unchanged into the DE field in the FR-SSCS PDU header and the ATM Cell Loss Priority of every ATM cell generated by the segmentation process of that frame shall be set to the constant value 0. mode2Const1: The DE field in the Q.922 core frame shall be copied unchanged into the DE field in the FR-SSCS PDU header and the ATM Cell Loss Priority of every ATM cell generated by the segmentation process of that frame shall be set to the constant value 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mode1(1), mode2Const0(2), mode2Const1(3)  

ipadAtmFrf5SvcClpToDeMappingMode 1.3.6.1.4.1.321.100.1.25.6.1.1.5
Cell Loss Priority to Discard Eligibility mapping mode. mode1: If one or more ATM cells belonging to a frame has its CLP field set to one or if the DE field of the FR-SSCS PDU is set to one, the IWF shall set the DE field of the Q.922 core frame. mode2: No mapping is performed from the ATM layer to Q.922 core layer. The FR-SSCS PDU DE field is copied unchanged to the Q.922 core frame DE field, independent of CLP indications(s) received at the ATM layer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mode1(1), mode2(2)  

ipadAtmFrf5SvcN1 1.3.6.1.4.1.321.100.1.25.6.1.1.6
Number of keep alive requests between full status requests.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

ipadAtmFrf5SvcN2 1.3.6.1.4.1.321.100.1.25.6.1.1.7
Number of errors before alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

ipadAtmFrf5SvcN3 1.3.6.1.4.1.321.100.1.25.6.1.1.8
Number of events to sample N2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

ipadAtmFrf5SvcT1 1.3.6.1.4.1.321.100.1.25.6.1.1.9
Delay before issuing a poll sequence.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..240  

ipadAtmFrf5SvcT2 1.3.6.1.4.1.321.100.1.25.6.1.1.10
T2 timer
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..245  

ipadAtmFrf5SvcActive 1.3.6.1.4.1.321.100.1.25.6.1.1.11
Specifies if the frf5 service is active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadAtmFrf5SvcAddDLCI 1.3.6.1.4.1.321.100.1.25.6.1.1.12
Identifies a DLCI number to be added.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf5SvcDeleteDLCI 1.3.6.1.4.1.321.100.1.25.6.1.1.13
Identifies a DLCI number to be deleted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf5DlciTable 1.3.6.1.4.1.321.100.1.25.6.2
Table of Mapped DLCIs for VCCs. This table is used for FRF5 to map one or more DLCIs to a VCC. When only one DLCI is mapped, a one-to-one relationship exists between the DLCI and the VCC. When more than one DLCI is mapped, a many-to-one DLCI/VCC relationship exists.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadAtmFrf5DlciTableEntry

ipadAtmFrf5DlciTableEntry 1.3.6.1.4.1.321.100.1.25.6.2.1
An entry in the ipad ATM Vcc parameter table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadAtmFrf5DlciTableEntry  

ipadAtmFrf5DlciIfIndex 1.3.6.1.4.1.321.100.1.25.6.2.1.1
The index into the ATM FRF5 DLCI table, corresponding to ifIndex.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf5DlciVpiIndex 1.3.6.1.4.1.321.100.1.25.6.2.1.2
The VPI index into the ATM FRF5 DLCI table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf5DlciVciIndex 1.3.6.1.4.1.321.100.1.25.6.2.1.3
The VCI index into the ATM FRF5 DLCI table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf5DlciIndex 1.3.6.1.4.1.321.100.1.25.6.2.1.4
The DLCI index into the ATM FRF5 DLCI table.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf5DlciEndpointName 1.3.6.1.4.1.321.100.1.25.6.2.1.5
Identifies the attached endpoint for this FRF5 DLCI.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)  

ipadAtmFrf5DlciStatus 1.3.6.1.4.1.321.100.1.25.6.2.1.6
The current status of this mapped entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(1), inactiveLearned(2), active(3), activeLearned(4)  

ipadAtmFrf5DlciCongestion 1.3.6.1.4.1.321.100.1.25.6.2.1.7
Specifies if the dlci is receiving frames with FECN or BECN bit set.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), no(2), yes(3)  

ipadAtmFrf8SvcTable 1.3.6.1.4.1.321.100.1.25.6.3
Table of ATM FRF8 profile parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpadAtmFrf8SvcTableEntry

ipadAtmFrf8SvcTableEntry 1.3.6.1.4.1.321.100.1.25.6.3.1
An entry in the ipad ATM FRF8 service table.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpadAtmFrf8SvcTableEntry  

ipadAtmFrf8SvcIfIndex 1.3.6.1.4.1.321.100.1.25.6.3.1.1
The index representing the ATM interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf8SvcVpiIndex 1.3.6.1.4.1.321.100.1.25.6.3.1.2
The index representing the VPI of the VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf8SvcVciIndex 1.3.6.1.4.1.321.100.1.25.6.3.1.3
The index representing the VCI of the VCC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipadAtmFrf8SvcDeToClpMappingMode 1.3.6.1.4.1.321.100.1.25.6.3.1.4
This object describes which mode of translation is in use for loss priority mapping in the frame relay to ATM direction. mode1(1) = the DE field in the Q.922 core frame shall be mapped to the ATM CLP field of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame. mode2Contst0(2) = the ATM CLP field of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame shall be set to constant 0. mode2Contst1(3) = the ATM CLP field of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame shall be set to constant 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mode1(1), mode2Const0(2), mode2Const1(3)  

ipadAtmFrf8SvcClpToDeMappingMode 1.3.6.1.4.1.321.100.1.25.6.3.1.5
This object describes which mode of translation is in use for loss priority mapping in the ATM to frame relay direction. mode1(1) = if one or more cells in a frame has its CLP field set, the DE field of the Q.922 core frame should be set. mode2Const0(2) = the DE field of the Q.922 core frame should be set to the constant 0. mode2Const1(3) = the DE field of the Q.922 core frame should be set to the constant 1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mode1(1), mode2Const0(2), mode2Const1(3)  

ipadAtmFrf8SvcCongestionMappingMode 1.3.6.1.4.1.321.100.1.25.6.3.1.6
This object describes which mode of translation is in use for forward congestion indication mapping in the frame relay to ATM direction. mode1(1) = The FECN field in the Q.922 core frame shall be mapped to the ATM EFCI field of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame. mode2(2) = The FECN field in the Q.922 core frame shall not be mapped to the ATM EFCI field of cells generated by the segmentation process of the AAL5 PDU containing the information of that frame. The EFCI field is always set to 'congestion not experienced'. In both of the modes above, if there is congestion in the forward direction in the ATM layer within the IWF, then the IWF can set the EFCI field to 'congestion experienced'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mode1(1), mode2(2)  

ipadAtmFrf8SvcEncapsulationMappingMode 1.3.6.1.4.1.321.100.1.25.6.3.1.7
This object indicates whether the mapping of upper layer protocol encapsulation is enabled on this interworking connection. transparentMode(1) = Forward the encapsulations unaltered. translationMode(2) = Perform mapping between the two encapsulations due to the incompatibilities of the two methods.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER transparentMode(1), translationMode(2)  

ipadAtmFrf8SvcEndpointName 1.3.6.1.4.1.321.100.1.25.6.3.1.8
Identifies the Frame Relay endpoint for this FRF8 Service.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..11)