IPV6-TCP-MIB

File: IPV6-TCP-MIB.mib (7468 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI IPV6-TC

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE mib-2 experimental
Ipv6Address Ipv6IfIndexOrZero

Defined Types

Ipv6TcpConnEntry  
SEQUENCE    
  ipv6TcpConnLocalAddress Ipv6Address
  ipv6TcpConnLocalPort INTEGER 0..65535
  ipv6TcpConnRemAddress Ipv6Address
  ipv6TcpConnRemPort INTEGER 0..65535
  ipv6TcpConnIfIndex Ipv6IfIndexOrZero
  ipv6TcpConnState INTEGER

Defined Values

ipv6TcpMIB 1.3.6.1.3.86
The MIB module for entities implementing TCP over IPv6.
MODULE-IDENTITY    

tcp 1.3.6.1.2.1.6
OBJECT IDENTIFIER    

ipv6TcpConnTable 1.3.6.1.2.1.6.16
A table containing TCP connection-specific information, for only those connections whose endpoints are IPv6 addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ipv6TcpConnEntry

ipv6TcpConnEntry 1.3.6.1.2.1.6.16.1
A conceptual row of the ipv6TcpConnTable containing information about a particular current TCP connection. Each row of this table is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state. Note that conceptual rows in this table require an additional index object compared to tcpConnTable, since IPv6 addresses are not guaranteed to be unique on the managed node.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6TcpConnEntry  

ipv6TcpConnLocalAddress 1.3.6.1.2.1.6.16.1.1
The local IPv6 address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IPv6 address associated with the managed node, the value ::0 is used.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6Address  

ipv6TcpConnLocalPort 1.3.6.1.2.1.6.16.1.2
The local port number for this TCP connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..65535  

ipv6TcpConnRemAddress 1.3.6.1.2.1.6.16.1.3
The remote IPv6 address for this TCP connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6Address  

ipv6TcpConnRemPort 1.3.6.1.2.1.6.16.1.4
The remote port number for this TCP connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..65535  

ipv6TcpConnIfIndex 1.3.6.1.2.1.6.16.1.5
An index object used to disambiguate conceptual rows in the table, since the connection 4-tuple may not be unique. If the connection's remote address (ipv6TcpConnRemAddress) is a link-local address and the connection's local address (ipv6TcpConnLocalAddress) is not a link-local address, this object identifies a local interface on the same link as the connection's remote link-local address. Otherwise, this object identifies the local interface that is associated with the ipv6TcpConnLocalAddress for this TCP connection. If such a local interface cannot be determined, this object should take on the value 0. (A possible example of this would be if the value of ipv6TcpConnLocalAddress is ::0.) The interface identified by a particular non-0 value of this index is the same interface as identified by the same value of ipv6IfIndex. The value of this object must remain constant during the life of the TCP connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6IfIndexOrZero  

ipv6TcpConnState 1.3.6.1.2.1.6.16.1.6
The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return an error response (`badValue' for SNMPv1, 'wrongValue' for SNMPv2) if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), closing(10), timeWait(11), deleteTCB(12)  

ipv6TcpConformance 1.3.6.1.3.86.2
OBJECT IDENTIFIER    

ipv6TcpCompliances 1.3.6.1.3.86.2.1
OBJECT IDENTIFIER    

ipv6TcpGroups 1.3.6.1.3.86.2.2
OBJECT IDENTIFIER    

ipv6TcpCompliance 1.3.6.1.3.86.2.1.1
The compliance statement for SNMPv2 entities which implement TCP over IPv6.
Status: current Access: read-write
MODULE-COMPLIANCE    

ipv6TcpGroup 1.3.6.1.3.86.2.2.1
The group of objects providing management of TCP over IPv6.
Status: current Access: read-write
OBJECT-GROUP