ITOUCH-ISIS-MIB

File: ITOUCH-ISIS-MIB.mib (83343 bytes)

Imported modules

RFC1155-SMI RFC-1212 ITOUCH-MIB

Imported symbols

Counter IpAddress OBJECT-TYPE
iTouch

Defined Types

ExistState  
INTEGER off(1), on(2)    

SupportedProtocol  
INTEGER iso8473(129), ip(204)    

XIsisSysEntry  
SEQUENCE    
  xIsisSysInstance INTEGER
  xIsisSysExistState INTEGER
  xIsisSysVersion INTEGER
  xIsisSysType INTEGER
  xIsisSysNET OCTET STRING
  xIsisSysMaxPathSplits INTEGER
  xIsisSysMinLSPTransInt INTEGER
  xIsisSysMaxLSPGenInt INTEGER
  xIsisSysMinBroadLSPTransInt INTEGER
  xIsisSysCompSNPInt INTEGER
  xIsisSysOrigL1LSPBuffSize INTEGER
  xIsisSysMaxAreaAddr INTEGER
  xIsisSysMinLSPGenInt INTEGER
  xIsisSysPollESHelloRate INTEGER
  xIsisSysPartSNPInt INTEGER
  xIsisSysWaitTime INTEGER
  xIsisSysDRISISHelloTimer INTEGER
  xIsisSysOperState INTEGER
  xIsisSysL1State INTEGER
  xIsisSysCorrLSPs Counter
  xIsisSysL1LSPDbaseOloads Counter
  xIsisSysManAddrsDropFromArea Counter
  xIsisSysAttmptsToExMaxSeqNum Counter
  xIsisSysSeqNumSkips Counter
  xIsisSysOwnLSPPurges Counter
  xIsisSysIDFieldLenMismatches Counter
  xIsisSysMaxAreaMis Counter
  xIsisSysOrigL2LSPBuffSize INTEGER
  xIsisSysL2State INTEGER
  xIsisSysL2LSPDbaseOloads Counter
  xIsisSysMaxAreaCheck INTEGER

XIsisManAreaAddrEntry  
SEQUENCE    
  xIsisManAreaAddrSysInstance INTEGER
  xIsisManAreaAddr OCTET STRING
  xIsisManAreaAddrExistState INTEGER

XIsisAreaAddrEntry  
SEQUENCE    
  xIsisAreaAddrSysInstance INTEGER
  xIsisAreaAddr OCTET STRING

XIsisSysProtSuppEntry  
SEQUENCE    
  xIsisSysProtSuppSysInstance INTEGER
  xIsisSysProtSuppProtocol SupportedProtocol
  xIsisSysProtSuppExistState ExistState

XIsisCircEntry  
SEQUENCE    
  xIsisCircSysInstance INTEGER
  xIsisCircIndex INTEGER
  xIsisCircIfIndex INTEGER
  xIsisCircOperState INTEGER
  xIsisCircExistState INTEGER
  xIsisCircType INTEGER
  xIsisCircHelloTimer INTEGER
  xIsisCircL1DefaultMetric INTEGER
  xIsisCircL1DelayMetric INTEGER
  xIsisCircL1ExpenseMetric INTEGER
  xIsisCircL1ErrorMetric INTEGER
  xIsisCircExtDomain INTEGER
  xIsisCircAdjChanges Counter
  xIsisCircInitFails Counter
  xIsisCircRejAdjs Counter
  xIsisCircOutCtrlPDUs Counter
  xIsisCircInCtrlPDUs Counter
  xIsisCircIDFieldLenMismatches Counter
  xIsisCircL2DefaultMetric INTEGER
  xIsisCircL2DelayMetric INTEGER
  xIsisCircL2ExpenseMetric INTEGER
  xIsisCircL2ErrorMetric INTEGER
  xIsisCircManL2Only INTEGER
  xIsisCircL1ISPriority INTEGER
  xIsisCircL1CircID OCTET STRING
  xIsisCircL1DesIS OCTET STRING
  xIsisCircLANL1DesISChanges Counter
  xIsisCircL2ISPriority INTEGER
  xIsisCircL2CircID OCTET STRING
  xIsisCircL2DesIS OCTET STRING
  xIsisCircLANL2DesISChanges Counter

XIsisCircISEntry  
SEQUENCE    
  xIsisCircISSysInstance INTEGER
  xIsisCircISIndex INTEGER
  xIsisCircISExistState INTEGER
  xIsisCircISOperState INTEGER
  xIsisCircISHoldTimerMult INTEGER
  xIsisCircISConfTimer INTEGER
  xIsisCircISSuggESConfTimer INTEGER
  xIsisCircISRedHoldTime INTEGER
  xIsisCircISESReachChgs Counter
  xIsisCircISInv9542PDUs Counter

XIsisISAdjEntry  
SEQUENCE    
  xIsisISAdjSysInstance INTEGER
  xIsisISAdjCircIndex INTEGER
  xIsisISAdjIndex INTEGER
  xIsisISAdjState INTEGER
  xIsisISAdjNeighSNPAAddress OCTET STRING
  xIsisISAdjNeighSysType INTEGER
  xIsisISAdjNeighSysID OCTET STRING
  xIsisISAdjUsage INTEGER
  xIsisISAdjHoldTimer INTEGER
  xIsisISAdjNeighPriority INTEGER

XIsisISAdjAreaAddrEntry  
SEQUENCE    
  xIsisISAdjAreaAddrSysInstance INTEGER
  xIsisISAdjAreaAddrCircIndex INTEGER
  xIsisISAdjAreaAddrAdjIndex INTEGER
  xIsisISAdjAreaAddress OCTET STRING

XIsisISAdjIPAddrEntry  
SEQUENCE    
  xIsisISAdjIPAddrSysInstance INTEGER
  xIsisISAdjIPAddrCircIndex INTEGER
  xIsisISAdjIPAddrAdjIndex INTEGER
  xIsisISAdjIPAddress IpAddress

XIsisISAdjProtSuppEntry  
SEQUENCE    
  xIsisISAdjProtSuppSysInstance INTEGER
  xIsisISAdjProtSuppCircIndex INTEGER
  xIsisISAdjProtSuppAdjIndex INTEGER
  xIsisISAdjProtSuppProtocol SupportedProtocol

XIsisESAdjEntry  
SEQUENCE    
  xIsisESAdjSysInstance INTEGER
  xIsisESAdjCircIndex INTEGER
  xIsisESAdjIndex INTEGER
  xIsisESAdjType INTEGER
  xIsisESAdjState INTEGER
  xIsisESAdjNeighSNPAAddress OCTET STRING
  xIsisESAdjExistState INTEGER
  xIsisESAdjESID OCTET STRING

XIsisRAEntry  
SEQUENCE    
  xIsisRASysInstance INTEGER
  xIsisRACircIndex INTEGER
  xIsisRAIndex INTEGER
  xIsisRAExistState INTEGER
  xIsisRAOperState INTEGER
  xIsisRAAddrPrefix OCTET STRING
  xIsisRAMapType INTEGER
  xIsisRADefMetric INTEGER
  xIsisRADelMetric INTEGER
  xIsisRAExpMetric INTEGER
  xIsisRAErrMetric INTEGER
  xIsisRADefMetricType INTEGER
  xIsisRADelMetricType INTEGER
  xIsisRAExpMetricType INTEGER
  xIsisRAErrMetricType INTEGER
  xIsisRASNPAAddress OCTET STRING
  xIsisRASNPAMask OCTET STRING
  xIsisRASNPAPrefix OCTET STRING
  xIsisRAType INTEGER

XIsisL1CLNPDestEntry  
SEQUENCE    
  xIsisL1CLNPRouteDest OCTET STRING
  xIsisL1CLNPRouteMetricQOS INTEGER
  xIsisL1CLNPRouteMetricType INTEGER
  xIsisL1CLNPRouteMetricValue INTEGER
  xIsisL1CLNPRouteForw OBJECT IDENTIFIER
  xIsisL1CLNPRouteSource INTEGER
  xIsisL1CLNPSysInstance INTEGER

XIsisL2CLNPDestEntry  
SEQUENCE    
  xIsisL2CLNPRouteDest OCTET STRING
  xIsisL2CLNPRouteMetricQOS INTEGER
  xIsisL2CLNPRouteMetricType INTEGER
  xIsisL2CLNPRouteMetricValue INTEGER
  xIsisL2CLNPRouteForw OBJECT IDENTIFIER
  xIsisL2CLNPRouteSource INTEGER
  xIsisL2CLNPSysInstance INTEGER

XIsisL3CLNPDestEntry  
SEQUENCE    
  xIsisL3CLNPRouteDest OCTET STRING
  xIsisL3CLNPRouteMetricQOS INTEGER
  xIsisL3CLNPRouteMetricType INTEGER
  xIsisL3CLNPRouteMetricValue INTEGER
  xIsisL3CLNPRouteForw OBJECT IDENTIFIER
  xIsisL3CLNPRouteSource INTEGER
  xIsisL3CLNPSysInstance INTEGER

XIsisCircClnsEntry  
SEQUENCE    
  xIsisCircClnsSysInstance INTEGER
  xIsisCircClnsIndex INTEGER
  xIsisCircClnsExistState INTEGER
  xIsisCircClnsOperState INTEGER
  xIsisCircClnsRxPDUs Counter
  xIsisCircClnsTxPDUs Counter

Defined Values

xIsis 1.3.6.1.4.1.33.26
OBJECT IDENTIFIER    

xIsisSystem 1.3.6.1.4.1.33.26.1
OBJECT IDENTIFIER    

xIsisCirc 1.3.6.1.4.1.33.26.2
OBJECT IDENTIFIER    

xIsisISAdj 1.3.6.1.4.1.33.26.3
OBJECT IDENTIFIER    

xIsisESAdj 1.3.6.1.4.1.33.26.4
OBJECT IDENTIFIER    

xIsisReachAddr 1.3.6.1.4.1.33.26.5
OBJECT IDENTIFIER    

xIsisCLNPDest 1.3.6.1.4.1.33.26.7
OBJECT IDENTIFIER    

xIsisSysTable 1.3.6.1.4.1.33.26.1.1
The set of instances of the Integrated IS-IS protocol existing on the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisSysEntry

xIsisSysEntry 1.3.6.1.4.1.33.26.1.1.1
Each row defines information specific to a single instance of the protocol existing on the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisSysEntry  

xIsisSysInstance 1.3.6.1.4.1.33.26.1.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisSysExistState 1.3.6.1.4.1.33.26.1.1.1.2
The validity of this instance of the Integrated IS-IS protocol. This object follows the existenceState behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisSysVersion 1.3.6.1.4.1.33.26.1.1.1.3
The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisSysType 1.3.6.1.4.1.33.26.1.1.1.4
The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER level1IS(1), level2IS(2)  

xIsisSysNET 1.3.6.1.4.1.33.26.1.1.1.5
The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write access, others may require the value to be set manually.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisSysMaxPathSplits 1.3.6.1.4.1.33.26.1.1.1.6
Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

xIsisSysMinLSPTransInt 1.3.6.1.4.1.33.26.1.1.1.7
Minimum interval, in seconds, between re-transmission of an LSP. This object follows the resettingTimer behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisSysMaxLSPGenInt 1.3.6.1.4.1.33.26.1.1.1.8
Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisSysMinBroadLSPTransInt 1.3.6.1.4.1.33.26.1.1.1.9
Minimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisSysCompSNPInt 1.3.6.1.4.1.33.26.1.1.1.10
Interval, in seconds, between generation of Complete Sequence Numbers PDUs by a designated Intermediate System on a broadcast circuit. This object follows the resettingTimer behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..600  

xIsisSysOrigL1LSPBuffSize 1.3.6.1.4.1.33.26.1.1.1.11
The maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 512..1492  

xIsisSysMaxAreaAddr 1.3.6.1.4.1.33.26.1.1.1.12
The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..254  

xIsisSysMinLSPGenInt 1.3.6.1.4.1.33.26.1.1.1.13
Minimum interval, in seconds, between successive generation of LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisSysPollESHelloRate 1.3.6.1.4.1.33.26.1.1.1.14
The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisSysPartSNPInt 1.3.6.1.4.1.33.26.1.1.1.15
Minimum interval between sending Partial Sequence Number PDUs. This object follows the resettingTimer behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisSysWaitTime 1.3.6.1.4.1.33.26.1.1.1.16
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisSysDRISISHelloTimer 1.3.6.1.4.1.33.26.1.1.1.17
The interval, in seconds, between the generation of IIH PDUs by the designated IS on a LAN. This object follows the resettingTimer behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisSysOperState 1.3.6.1.4.1.33.26.1.1.1.18
The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisSysL1State 1.3.6.1.4.1.33.26.1.1.1.19
The state of the Level 1 database.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2), waiting(3)  

xIsisSysCorrLSPs 1.3.6.1.4.1.33.26.1.1.1.20
Number of corrupted LSPs detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisSysL1LSPDbaseOloads 1.3.6.1.4.1.33.26.1.1.1.21
Number of times the LSP L1 database has become overloaded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisSysManAddrsDropFromArea 1.3.6.1.4.1.33.26.1.1.1.22
Number of times a manual address has been dropped from the area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisSysAttmptsToExMaxSeqNum 1.3.6.1.4.1.33.26.1.1.1.23
Number of times the IS has attempted to exceed the maximum sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisSysSeqNumSkips 1.3.6.1.4.1.33.26.1.1.1.24
Number of times a sequence number skip has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisSysOwnLSPPurges 1.3.6.1.4.1.33.26.1.1.1.25
Number of times a zero-aged copy of the system's own LSP is received from some other node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisSysIDFieldLenMismatches 1.3.6.1.4.1.33.26.1.1.1.26
Number of times a PDU is received with a different value for ID field length to that of the receiving system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisSysMaxAreaMis 1.3.6.1.4.1.33.26.1.1.1.27
Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisSysOrigL2LSPBuffSize 1.3.6.1.4.1.33.26.1.1.1.28
The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 512..1492  

xIsisSysL2State 1.3.6.1.4.1.33.26.1.1.1.29
The state of the Level 2 database.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2), waiting(3)  

xIsisSysL2LSPDbaseOloads 1.3.6.1.4.1.33.26.1.1.1.30
Number of times the Level 2 LSP database has become overloaded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisSysMaxAreaCheck 1.3.6.1.4.1.33.26.1.1.1.31
When on, enables checking of maximum area addresses per IS version of ISO10589.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

xIsisManAreaAddrTable 1.3.6.1.4.1.33.26.1.2
The set of manual area addresses configured on this Intermediate System.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisManAreaAddrEntry

xIsisManAreaAddrEntry 1.3.6.1.4.1.33.26.1.2.1
Each entry contains one area address manually configured on this system
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisManAreaAddrEntry  

xIsisManAreaAddrSysInstance 1.3.6.1.4.1.33.26.1.2.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisManAreaAddr 1.3.6.1.4.1.33.26.1.2.1.2
A manually configured area address for this system. This object follows the index behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisManAreaAddrExistState 1.3.6.1.4.1.33.26.1.2.1.3
The state of the xIsisManAreaAddrEntry. This object follows the ExistenceState behaviour. If an attempt is made to set this object to the value off when the corresponding xIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding ISIS instance has xIsisSysOperState set to On then the attempt is rejected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisAreaAddrTable 1.3.6.1.4.1.33.26.1.3
The union of the sets of area addresses reported in all Level 1 LSPs received by this instance of the protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisAreaAddrEntry

xIsisAreaAddrEntry 1.3.6.1.4.1.33.26.1.3.1
Each entry contains one area address reported in a Level 1 LSP received by this instance of the protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisAreaAddrEntry  

xIsisAreaAddrSysInstance 1.3.6.1.4.1.33.26.1.3.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisAreaAddr 1.3.6.1.4.1.33.26.1.3.1.2
An area address reported in a Level 1 LSP received by this instance of the protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisSysProtSuppTable 1.3.6.1.4.1.33.26.1.4
This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisSysProtSuppEntry

xIsisSysProtSuppEntry 1.3.6.1.4.1.33.26.1.4.1
Each entry contains one protocol supported by an instance of the Integrated ISIS protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisSysProtSuppEntry  

xIsisSysProtSuppSysInstance 1.3.6.1.4.1.33.26.1.4.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisSysProtSuppProtocol 1.3.6.1.4.1.33.26.1.4.1.2
One supported protocol. This object follows the index behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SupportedProtocol  

xIsisSysProtSuppExistState 1.3.6.1.4.1.33.26.1.4.1.3
The state of the xIsisSysProtSuppEntry. This object follows the ExistenceState and ReplaceOnlyWhileInstanceDisabled behaviours.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ExistState  

xIsisCircTable 1.3.6.1.4.1.33.26.2.1
The table of circuits used by each instance of Integrated IS-IS on this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisCircEntry

xIsisCircEntry 1.3.6.1.4.1.33.26.2.1.1
An xIsisCircEntry exists for each circuit used by Integrated IS-IS on this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisCircEntry  

xIsisCircSysInstance 1.3.6.1.4.1.33.26.2.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisCircIndex 1.3.6.1.4.1.33.26.2.1.1.2
The identifier of this circuit, unique within the instance of the protocol. This object follows the index behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255  

xIsisCircIfIndex 1.3.6.1.4.1.33.26.2.1.1.3
The value of ifIndex for the interface to which this circuit corresponds. This object follows the replaceOnlyWhileDisabled behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisCircOperState 1.3.6.1.4.1.33.26.2.1.1.4
The operational state of the circuit. This object follows the operationalState behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisCircExistState 1.3.6.1.4.1.33.26.2.1.1.5
The existence state of this circuit. This object follows the ExistenceState behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisCircType 1.3.6.1.4.1.33.26.2.1.1.6
The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of xIsisCircIfIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), broadcast(2), ptToPt(3)  

xIsisCircHelloTimer 1.3.6.1.4.1.33.26.2.1.1.7
The period, in seconds, between IIH PDUs. It is also used as the period between ISH PDUs when polling the ES configuration. This object follows the resettingTimer behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisCircL1DefaultMetric 1.3.6.1.4.1.33.26.2.1.1.8
The default metric value of this circuit for Level 1 traffic. 0 means the IS will automatically generate Level 1 default metric for the circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisCircL1DelayMetric 1.3.6.1.4.1.33.26.2.1.1.9
The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisCircL1ExpenseMetric 1.3.6.1.4.1.33.26.2.1.1.10
The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisCircL1ErrorMetric 1.3.6.1.4.1.33.26.2.1.1.11
The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisCircExtDomain 1.3.6.1.4.1.33.26.2.1.1.12
If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(1), true(2)  

xIsisCircAdjChanges 1.3.6.1.4.1.33.26.2.1.1.13
The number of times an adjacency state change has occurred on this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisCircInitFails 1.3.6.1.4.1.33.26.2.1.1.14
The number of times initialization of this circuit has failed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisCircRejAdjs 1.3.6.1.4.1.33.26.2.1.1.15
The number of times an adjacency has been rejected on this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisCircOutCtrlPDUs 1.3.6.1.4.1.33.26.2.1.1.16
The number of IS-IS control PDUs sent on this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisCircInCtrlPDUs 1.3.6.1.4.1.33.26.2.1.1.17
The number of IS-IS control PDUs received on this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisCircIDFieldLenMismatches 1.3.6.1.4.1.33.26.2.1.1.18
The number of times an IS-IS control PDU with an ID field length different to that for this system has been received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisCircL2DefaultMetric 1.3.6.1.4.1.33.26.2.1.1.20
The default metric value of this circuit for level 2 traffic. 0 means the IS will automatically generate the Level 2 default metric for this circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisCircL2DelayMetric 1.3.6.1.4.1.33.26.2.1.1.21
The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisCircL2ExpenseMetric 1.3.6.1.4.1.33.26.2.1.1.22
The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisCircL2ErrorMetric 1.3.6.1.4.1.33.26.2.1.1.23
The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisCircManL2Only 1.3.6.1.4.1.33.26.2.1.1.24
When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER false(1), true(2)  

xIsisCircL1ISPriority 1.3.6.1.4.1.33.26.2.1.1.25
The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

xIsisCircL1CircID 1.3.6.1.4.1.33.26.2.1.1.26
The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisCircL1DesIS 1.3.6.1.4.1.33.26.2.1.1.27
The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisCircLANL1DesISChanges 1.3.6.1.4.1.33.26.2.1.1.28
The number of times the LAN Level 1 Designated Intermediate System has changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisCircL2ISPriority 1.3.6.1.4.1.33.26.2.1.1.29
The priority for becoming LAN level 2 Designated Intermediate System.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..127  

xIsisCircL2CircID 1.3.6.1.4.1.33.26.2.1.1.30
The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisCircL2DesIS 1.3.6.1.4.1.33.26.2.1.1.31
The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisCircLANL2DesISChanges 1.3.6.1.4.1.33.26.2.1.1.32
The number of times the LAN Level 2 Designated Intermediate System has changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisCircISTable 1.3.6.1.4.1.33.26.2.2
The set of objects controlling the operation of the IS functions of the ES-IS protocol (ISO 9542) on each circuit over which ISIS is run.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisCircISEntry

xIsisCircISEntry 1.3.6.1.4.1.33.26.2.2.1
Each entry contains objects controlling the operation of the IS functions of the ES-IS protocol (ISO 9542) on one circuit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisCircISEntry  

xIsisCircISSysInstance 1.3.6.1.4.1.33.26.2.2.1.1
The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisCircISIndex 1.3.6.1.4.1.33.26.2.2.1.2
The unique identifier of this row. This value is the same as the value of the ifIndex object which identifies the interface which corresponds to this circuit. This object follows the index behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisCircISExistState 1.3.6.1.4.1.33.26.2.2.1.3
The existence state of this row. This object follows the ExistenceState behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisCircISOperState 1.3.6.1.4.1.33.26.2.2.1.4
The operational state of the row. This object follows the operationalState behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisCircISHoldTimerMult 1.3.6.1.4.1.33.26.2.2.1.5
The factor to derive holding timer from configuration timer. This value when multipled by a configuration timer yields the value of the holding timer parameter issued with configuration information. The semantics of this parameter are such that it is permissible to add a delta value to the result to compensate for possible delays and imprecision of timers. The result of the calculation is truncated, upon overflow, to the maximum value for the parameter permitted by the protocol (65535).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..63  

xIsisCircISConfTimer 1.3.6.1.4.1.33.26.2.2.1.6
Value in seconds for the ISO 9542 IS configuration timer. It is used to determine how often an IS reports configuration information to ESs. This object follows the resettingTimer behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

xIsisCircISSuggESConfTimer 1.3.6.1.4.1.33.26.2.2.1.7
Value to be used for the ISO 9542 suggested ES configuration timer value (in seconds), advertised in IS Hellos generated by the system on this circuit. This object follows the resettingTimer behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

xIsisCircISRedHoldTime 1.3.6.1.4.1.33.26.2.2.1.8
The holding time (in seconds) to be specified in Redirect PDUs generated by the system on this circuit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisCircISESReachChgs 1.3.6.1.4.1.33.26.2.2.1.9
Count of the number of changes in reachability of End Systems from this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisCircISInv9542PDUs 1.3.6.1.4.1.33.26.2.2.1.10
Counter of invalid 9542 PDUs received. This is the number of ISO 9452 PDUs received which are discarded as a result of the PDU Header Error Detection or Protocol Error Processing Functions specified in ISO 9542.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisISAdjTable 1.3.6.1.4.1.33.26.3.1
The table of adjacencies to Intermediate Systems.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisISAdjEntry

xIsisISAdjEntry 1.3.6.1.4.1.33.26.3.1.1
Each entry corresponds to one adjacency to an Intermediate System on this system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisISAdjEntry  

xIsisISAdjSysInstance 1.3.6.1.4.1.33.26.3.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjCircIndex 1.3.6.1.4.1.33.26.3.1.1.2
The identifier of the Circuit which is the parent of the IS adjacency.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjIndex 1.3.6.1.4.1.33.26.3.1.1.3
A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is assigned by the system when the adjacency is created automatically.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjState 1.3.6.1.4.1.33.26.3.1.1.4
The state of the adjacency
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initializing(1), up(2), failed(3), down(4)  

xIsisISAdjNeighSNPAAddress 1.3.6.1.4.1.33.26.3.1.1.5
The SNPA address of the neighboring system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisISAdjNeighSysType 1.3.6.1.4.1.33.26.3.1.1.6
The type of the neighboring system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), intermediateSystem(3), l1IntermediateSystem(4), l2IntermediateSystem(5)  

xIsisISAdjNeighSysID 1.3.6.1.4.1.33.26.3.1.1.7
The system ID of the neighboring Intermediate System set from the source ID field of the neighbor's IIH PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisISAdjUsage 1.3.6.1.4.1.33.26.3.1.1.8
The usage of the adjacency. An adjacency of type level1 will be used for level 1 traffic only. An adjacency of type level2 will be used for level 2 traffic only. An adjacency of type level1and2 will be used for both level 1 and level 2 traffic. There may be two adjacencies (of types level1 and level2) between the same pair of Intermediate Systems.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER undefined(1), level1(2), level2(3), level1and2(4)  

xIsisISAdjHoldTimer 1.3.6.1.4.1.33.26.3.1.1.9
The holding time for this adjacency updated from received IIH PDUs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

xIsisISAdjNeighPriority 1.3.6.1.4.1.33.26.3.1.1.10
Priority of the neighboring Intermediate System for becoming the LAN Level 1 Designated Intermediate System if the value of xIsisISAdjNeighSysType is L1IntermediateSystem or LAN Level 2 Designated Intermediate System if the value of xIsisISAdjNeighSysType is L2IntermediateSystem.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

xIsisISAdjAreaAddrTable 1.3.6.1.4.1.33.26.3.2
This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisISAdjAreaAddrEntry

xIsisISAdjAreaAddrEntry 1.3.6.1.4.1.33.26.3.2.1
Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisISAdjAreaAddrEntry  

xIsisISAdjAreaAddrSysInstance 1.3.6.1.4.1.33.26.3.2.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjAreaAddrCircIndex 1.3.6.1.4.1.33.26.3.2.1.2
The identifier of the Circuit which is the parent of the IS adjacency to which this Area Address entry corresponds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjAreaAddrAdjIndex 1.3.6.1.4.1.33.26.3.2.1.3
The identifier of the IS adjacency to which this entry belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjAreaAddress 1.3.6.1.4.1.33.26.3.2.1.4
One Area Address as reported in IIH PDUs received from the neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisISAdjIPAddrTable 1.3.6.1.4.1.33.26.3.3
This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisISAdjIPAddrEntry

xIsisISAdjIPAddrEntry 1.3.6.1.4.1.33.26.3.3.1
Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisISAdjIPAddrEntry  

xIsisISAdjIPAddrSysInstance 1.3.6.1.4.1.33.26.3.3.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjIPAddrCircIndex 1.3.6.1.4.1.33.26.3.3.1.2
The identifier of the Circuit which is the parent of the IS adjacency to which this IP Address entry corresponds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjIPAddrAdjIndex 1.3.6.1.4.1.33.26.3.3.1.3
The identifier of the IS adjacency to which this entry belongs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjIPAddress 1.3.6.1.4.1.33.26.3.3.1.4
One IP Address as reported in IIH PDUs received from the neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

xIsisISAdjProtSuppTable 1.3.6.1.4.1.33.26.3.4
This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisISAdjProtSuppEntry

xIsisISAdjProtSuppEntry 1.3.6.1.4.1.33.26.3.4.1
Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisISAdjProtSuppEntry  

xIsisISAdjProtSuppSysInstance 1.3.6.1.4.1.33.26.3.4.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjProtSuppCircIndex 1.3.6.1.4.1.33.26.3.4.1.2
The identifier of the Circuit which is the parent of the IS adjacency to which this supported protocol entry corresponds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjProtSuppAdjIndex 1.3.6.1.4.1.33.26.3.4.1.3
The identifier the IS adjacency to which this entry corresponds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisISAdjProtSuppProtocol 1.3.6.1.4.1.33.26.3.4.1.4
One supported protocol as reported in IIH PDUs received from the neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SupportedProtocol  

xIsisESAdjTable 1.3.6.1.4.1.33.26.4.1
The table of End System IDs of neighboring End Systems as reported in their ESH PDUs or as configured manually
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisESAdjEntry

xIsisESAdjEntry 1.3.6.1.4.1.33.26.4.1.1
Each entry contains one End System ID of a neighboring End System as reported in an ESH PDU or as configured manually.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisESAdjEntry  

xIsisESAdjSysInstance 1.3.6.1.4.1.33.26.4.1.1.1
The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisESAdjCircIndex 1.3.6.1.4.1.33.26.4.1.1.2
The identifier of the Circuit which is the parent of the ES adjacency to which this End System ID entry corresponds. This object follows the index and manualOrAutomatic behaviours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisESAdjIndex 1.3.6.1.4.1.33.26.4.1.1.3
The identifier of the ES adjacency to which this entry belongs. This object follows the index and manualOrAutomatic behaviours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisESAdjType 1.3.6.1.4.1.33.26.4.1.1.4
The indication of whether this adjacency was created manually by management action or automatically by the implementation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

xIsisESAdjState 1.3.6.1.4.1.33.26.4.1.1.5
The state of the adjacency. Adjacencies created manually always have this value set to up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER initializing(1), up(2), failed(3), down(4)  

xIsisESAdjNeighSNPAAddress 1.3.6.1.4.1.33.26.4.1.1.6
The SNPA address of the neighboring system. This object follows the manualOrAutomatic behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

xIsisESAdjExistState 1.3.6.1.4.1.33.26.4.1.1.7
The existence state of this ES Adjacency. This object follows the ExistenceState behaviour. This object follows the manualOrAutomatic behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisESAdjESID 1.3.6.1.4.1.33.26.4.1.1.8
An End System ID of a neighboring End System. This object follows the index and manualOrAutomatic behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisRATable 1.3.6.1.4.1.33.26.5.1
The table of Reachable Addresses to NSAPs or Address Prefixes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisRAEntry

xIsisRAEntry 1.3.6.1.4.1.33.26.5.1.1
Each entry defines a Reachable Address to a NSAP or Address Prefix.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisRAEntry  

xIsisRASysInstance 1.3.6.1.4.1.33.26.5.1.1.1
The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisRACircIndex 1.3.6.1.4.1.33.26.5.1.1.2
The identifier of the Circuit over which this destination is reachable. This object follows the index and manualOrAutomatic behaviours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisRAIndex 1.3.6.1.4.1.33.26.5.1.1.3
The identifier for this xIsisRAEntry. This value must be unique amongst all Reachable Addresses on the same parent Circuit. This object follows the index and manualOrAutomatic behaviours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisRAExistState 1.3.6.1.4.1.33.26.5.1.1.4
The existence state of this Reachable Address. This object follows the ExistenceState and manualOrAutomatic behaviours.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisRAOperState 1.3.6.1.4.1.33.26.5.1.1.5
The operational state of the Reachable Address. This object follows the operationalState and manualOrAutomatic behaviours.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisRAAddrPrefix 1.3.6.1.4.1.33.26.5.1.1.6
The destination of this Reachable Address. This is an Address Prefix. This object follows the replaceOnlyWhileDisabled and manualOrAutomatic behaviours.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

xIsisRAMapType 1.3.6.1.4.1.33.26.5.1.1.7
The type of mapping to be employed to ascertain the SNPA Address which should be used in forwarding PDUs for this Reachable Address prefix. This object follows the manualOrAutomatic behaviour. The following values of mapping type are defined: none: The mapping is null because the neighbor SNPA is implicit by nature of the subnetwork (e.g. a point-to-point linkage). explicit: The subnetwork addresses in the object xIsisRASNPAAddress is to be used. extractIDI: The SNPA is embedded in the IDI of the destination NSAP Address. The mapping algorithm extracts the SNPA to be used according to the format and encoding rules of ISO8473/Add2. This SNPA extraction algorithm can be used in conjunction with Reachable Address prefixes from the X.121, F.69, E.163 and E.164 addressing subdomains. extractDSP: All, or a suffix, of the SNPA is embedded in the DSP of the destination address. This SNPA extraction algorithm extracts the embedded subnetwork addressing information by performing a logical AND of the xIsisRASNPAMask object value with the destination address. The part of the SNPA extracted from the destination NSAP is appended to the xIsisRASNPAPrefix object value to form the next hop subnetwork addressing information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), explicit(2), extractIDI(3), extractDSP(4)  

xIsisRADefMetric 1.3.6.1.4.1.33.26.5.1.1.8
The default metric value for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..63  

xIsisRADelMetric 1.3.6.1.4.1.33.26.5.1.1.9
The delay metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indicate that this metric is not supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisRAExpMetric 1.3.6.1.4.1.33.26.5.1.1.10
The expense metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indicate that this metric is not supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisRAErrMetric 1.3.6.1.4.1.33.26.5.1.1.11
The error metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indicate that this metric is not supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

xIsisRADefMetricType 1.3.6.1.4.1.33.26.5.1.1.12
Indicates whether the default metric is internal or external. This object follows the manualOrAutomatic behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

xIsisRADelMetricType 1.3.6.1.4.1.33.26.5.1.1.13
Indicates whether the delay metric is internal or external. This object follows the manualOrAutomatic behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

xIsisRAExpMetricType 1.3.6.1.4.1.33.26.5.1.1.14
Indicates whether the expense metric is internal or external. This object follows the manualOrAutomatic behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

xIsisRAErrMetricType 1.3.6.1.4.1.33.26.5.1.1.15
Indicates whether the error metric is internal or external. This object follows the manualOrAutomatic behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

xIsisRASNPAAddress 1.3.6.1.4.1.33.26.5.1.1.16
The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches the address prefix of the Reachable Address. This object follows the manualOrAutomatic behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

xIsisRASNPAMask 1.3.6.1.4.1.33.26.5.1.1.17
A bit mask with 1 bits indicating the positions in the effective destination address from which embedded SNPA information is to be extracted. For the extraction the first octet of the xIsisRASNPAMask object value is aligned with the first octet (AFI) of the NSAP Address. If the xIsisRASNPAMask object value and NSAP Address are of different lengths, the shorter of the two is logically padded with zeros before performing the extraction. This object follows the manualOrAutomatic behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

xIsisRASNPAPrefix 1.3.6.1.4.1.33.26.5.1.1.18
A fixed SNPA prefix for use when the xIsisRAMapType is extractDSP. The SNPA Address to use is formed by concatenating the fixed SNPA prefix with a variable SNPA part that is extracted from the effective destination address. For Reachable Address prefixes in which the entire SNPA is embedded in the DSP the SNPA Prefix shall be null. This object follows the manualOrAutomatic behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

xIsisRAType 1.3.6.1.4.1.33.26.5.1.1.20
The type of Reachable address. Those of type manual are created by the network manager. Those of type automatic are created through propogation of routing information from another routing protocol (eg. IDRP).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER manual(1), automatic(2)  

xIsisL1CLNPDestTable 1.3.6.1.4.1.33.26.7.1
The Level 1 CLNP Destination Table records information about each end system ID destination known to the Intermediate System.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisL1CLNPDestEntry

xIsisL1CLNPDestEntry 1.3.6.1.4.1.33.26.7.1.1
Each entry records information about one CLNP end system ID destination known to the Intermediate System.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisL1CLNPDestEntry  

xIsisL1CLNPRouteDest 1.3.6.1.4.1.33.26.7.1.1.2
The destination end system ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisL1CLNPRouteMetricQOS 1.3.6.1.4.1.33.26.7.1.1.3
The QOS metric for this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER default(1), delay(2), expense(3), error(4)  

xIsisL1CLNPRouteMetricType 1.3.6.1.4.1.33.26.7.1.1.4
Indicates whether the metric has an external component or not
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

xIsisL1CLNPRouteMetricValue 1.3.6.1.4.1.33.26.7.1.1.5
The path metric value for this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1023  

xIsisL1CLNPRouteForw 1.3.6.1.4.1.33.26.7.1.1.6
The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an OBJECT IDENTIFIER for an instance of the object: xIsisESAdjSysInstance or xIsisISAdjSysInstance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xIsisL1CLNPRouteSource 1.3.6.1.4.1.33.26.7.1.1.7
The source of the destination. Manual is used if the source is manually configured information on the system. Level1 is used if the source is Level 1 LSPs. Esis is used if the source is ES Hellos
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER manual(1), level1(2), esis(3)  

xIsisL1CLNPSysInstance 1.3.6.1.4.1.33.26.7.1.1.1
If the value of xIsisL1CLNPRouteSource is manual or level1 then this is the identifier of the Integrated IS-IS Level 1 instance from which this reachability information was learned, otherwise this value is zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisL2CLNPDestTable 1.3.6.1.4.1.33.26.7.2
The Level 2 CLNP Destination Table records information about each NSAP Address Prefix known to the Intermediate System.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisL2CLNPDestEntry

xIsisL2CLNPDestEntry 1.3.6.1.4.1.33.26.7.2.1
Each entry records information about one NSAP Address Prefix known to the Intermediate System.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisL2CLNPDestEntry  

xIsisL2CLNPRouteDest 1.3.6.1.4.1.33.26.7.2.1.2
The destination address prefix.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisL2CLNPRouteMetricQOS 1.3.6.1.4.1.33.26.7.2.1.3
The QOS metric for this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER default(1), delay(2), expense(3), error(4)  

xIsisL2CLNPRouteMetricType 1.3.6.1.4.1.33.26.7.2.1.4
Indicates whether the metric has an external component or not
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

xIsisL2CLNPRouteMetricValue 1.3.6.1.4.1.33.26.7.2.1.5
The path metric value for this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1023  

xIsisL2CLNPRouteForw 1.3.6.1.4.1.33.26.7.2.1.6
The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an OBJECT IDENTIFIER for an instance of one of the following objects: isisVirtSysInstance, xIsisISAdjSysInstance, xIsisRASysInstance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xIsisL2CLNPRouteSource 1.3.6.1.4.1.33.26.7.2.1.7
The source of the destination. Manual is used if the source is manually configured information on the system. Level2 is used if the source is Level 2 LSPs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER manual(1), level2(2)  

xIsisL2CLNPSysInstance 1.3.6.1.4.1.33.26.7.2.1.1
The identifier of the Integrated IS-IS Level 2 instance from which this reachability information was learned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisL3CLNPDestTable 1.3.6.1.4.1.33.26.7.3
The Level 3 CLNP Destination Table records information about each Reachable Address Prefix known to the Intermediate System.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisL3CLNPDestEntry

xIsisL3CLNPDestEntry 1.3.6.1.4.1.33.26.7.3.1
Each entry records information about one Address Prefix known to the Intermediate System.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisL3CLNPDestEntry  

xIsisL3CLNPRouteDest 1.3.6.1.4.1.33.26.7.3.1.2
The destination address prefix.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

xIsisL3CLNPRouteMetricQOS 1.3.6.1.4.1.33.26.7.3.1.3
The QOS metric for this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER default(1), delay(2), expense(3), error(4)  

xIsisL3CLNPRouteMetricType 1.3.6.1.4.1.33.26.7.3.1.4
Indicates whether the metric has an external component or not
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

xIsisL3CLNPRouteMetricValue 1.3.6.1.4.1.33.26.7.3.1.5
The path metric value for this destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1023  

xIsisL3CLNPRouteForw 1.3.6.1.4.1.33.26.7.3.1.6
The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an OBJECT IDENTIFIER for an instance of one of the following objects: isisVirtSysInstance, xIsisISAdjSysInstance, xIsisRASysInstance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xIsisL3CLNPRouteSource 1.3.6.1.4.1.33.26.7.3.1.7
The source of the destination. Manual is used if the source is manually configured information on the system. Level3 is used if the source is Level 3 LSPs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER manual(1), level2(2)  

xIsisL3CLNPSysInstance 1.3.6.1.4.1.33.26.7.3.1.1
The identifier of the Integrated IS-IS Level 3 instance from which this reachability information was learned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisCircClnsTable 1.3.6.1.4.1.33.26.2.3
The set of objects controlling the operation of the CLNS protocol (ISO 8473) on each circuit over which ISIS is run.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    XIsisCircClnsEntry

xIsisCircClnsEntry 1.3.6.1.4.1.33.26.2.3.1
Each entry contains objects controlling the operation of the CLNS protocol (ISO 8473) on one circuit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  XIsisCircClnsEntry  

xIsisCircClnsSysInstance 1.3.6.1.4.1.33.26.2.3.1.1
The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisCircClnsIndex 1.3.6.1.4.1.33.26.2.3.1.2
The unique identifier of this row. This value is the same as the value of the ifIndex object which identifies the interface which corresponds to this circuit. This object follows the index behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

xIsisCircClnsExistState 1.3.6.1.4.1.33.26.2.3.1.3
The existence state of this row. This object follows the ExistenceState behaviour.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisCircClnsOperState 1.3.6.1.4.1.33.26.2.3.1.4
The operational state of the row. This object follows the operationalState behaviour.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), on(2)  

xIsisCircClnsRxPDUs 1.3.6.1.4.1.33.26.2.3.1.5
Counter of number of CLNS PDUs received on this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

xIsisCircClnsTxPDUs 1.3.6.1.4.1.33.26.2.3.1.6
Counter of number of CLNS PDUs transmitted on this circuit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter