JNX-L2TP-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	HCNUM-TC
INET-ADDRESS-MIB	SNMP-FRAMEWORK-MIB	SNMPv2-CONF
JUNIPER-SMI

Imported symbols

Integer32	Unsigned32	Counter32
Gauge32	Counter64	TimeTicks
transmission	MODULE-IDENTITY	OBJECT-TYPE
NOTIFICATION-TYPE	DateAndTime	RowStatus
StorageType	TEXTUAL-CONVENTION	TruthValue
CounterBasedGauge64	InetAddress	InetAddressType
InetPortNumber	SnmpAdminString	OBJECT-GROUP
MODULE-COMPLIANCE	NOTIFICATION-GROUP	jnxL2tpMibRoot

Defined Types

JnxL2tpTunnelGroupStatsEntry
SEQUENCE
	jnxL2tpTunnelGroupStatsTnlGrpName	OCTET STRING
	jnxL2tpTunnelGroupStatsGatewayAddrType	InetAddressType
	jnxL2tpTunnelGroupStatsGatewayAddr	InetAddress
	jnxL2tpTunnelGroupStatsSvcIntfName	SnmpAdminString
	jnxL2tpTunnelGroupStatsTotalTunnels	Gauge32
	jnxL2tpTunnelGroupStatsTotalSessions	Gauge32

JnxL2tpTunnelStatsEntry
SEQUENCE
	jnxL2tpTunnelStatsLocalTID	Integer32
	jnxL2tpTunnelStatsServiceInterface	SnmpAdminString
	jnxL2tpTunnelStatsTunnelGroup	SnmpAdminString
	jnxL2tpTunnelStatsRemoteTID	Integer32
	jnxL2tpTunnelStatsRemoteIpAddrType	InetAddressType
	jnxL2tpTunnelStatsRemoteIpAddress	InetAddress
	jnxL2tpTunnelStatsRemoteUdpPort	InetPortNumber
	jnxL2tpTunnelStatsActiveSessions	Gauge32
	jnxL2tpTunnelStatsState	INTEGER
	jnxL2tpTunnelStatsLocalIpAddrType	InetAddressType
	jnxL2tpTunnelStatsLocalIpAddress	InetAddress
	jnxL2tpTunnelStatsLocalUdpPort	InetPortNumber
	jnxL2tpTunnelStatsLocalHostName	SnmpAdminString
	jnxL2tpTunnelStatsRemoteHostName	SnmpAdminString
	jnxL2tpTunnelMaxSessions	Integer32
	jnxL2tpTunnelStatsWindowSize	Integer32
	jnxL2tpTunnelStatsHelloInterval	Integer32
	jnxL2tpTunnelStatsCreationTime	DateAndTime
	jnxL2tpTunnelStatsUpTime	TimeTicks
	jnxL2tpTunnelStatsIdleTime	TimeTicks
	jnxL2tpTunnelStatsCollectionStart	DateAndTime
	jnxL2tpTunnelStatsControlTxPkts	Counter32
	jnxL2tpTunnelStatsControlTxBytes	Counter64
	jnxL2tpTunnelStatsControlRxPkts	Counter32
	jnxL2tpTunnelStatsControlRxBytes	Counter64
	jnxL2tpTunnelStatsDataTxPkts	Counter32
	jnxL2tpTunnelStatsDataTxBytes	Counter64
	jnxL2tpTunnelStatsDataRxPkts	Counter32
	jnxL2tpTunnelStatsDataRxBytes	Counter64
	jnxL2tpTunnelStatsErrorTxPkts	Counter32
	jnxL2tpTunnelStatsErrorRxPkts	Counter32
	jnxL2tpTunnelStatsControlTxBytes32	Counter32
	jnxL2tpTunnelStatsControlRxBytes32	Counter32
	jnxL2tpTunnelStatsDataTxPkts64	Counter64
	jnxL2tpTunnelStatsDataRxPkts64	Counter64

JnxL2tpSessionStatsEntry
SEQUENCE
	jnxL2tpSessionStatsLocalTID	Integer32
	jnxL2tpSessionStatsLocalSID	Integer32
	jnxL2tpSessionStatsServiceInterface	SnmpAdminString
	jnxL2tpSessionStatsTunnelGroup	SnmpAdminString
	jnxL2tpSessionStatsRemoteSID	Integer32
	jnxL2tpSessionStatsInterfaceUnit	Unsigned32
	jnxL2tpSessionStatsEncapType	INTEGER
	jnxL2tpSessionStatsBundleID	Integer32
	jnxL2tpSessionStatsState	INTEGER
	jnxL2tpSessionStatsUserName	SnmpAdminString
	jnxL2tpSessionStatsMode	INTEGER
	jnxL2tpSessionStatsLocalAddrType	InetAddressType
	jnxL2tpSessionStatsLocalAddress	InetAddress
	jnxL2tpSessionStatsLocalUdpPort	InetPortNumber
	jnxL2tpSessionStatsRemoteAddrType	InetAddressType
	jnxL2tpSessionStatsRemoteAddress	InetAddress
	jnxL2tpSessionStatsRemoteUdpPort	InetPortNumber
	jnxL2tpSessionStatsLocalHostName	SnmpAdminString
	jnxL2tpSessionStatsRemoteHostName	SnmpAdminString
	jnxL2tpSessionAssignedIpAddrType	InetAddressType
	jnxL2tpSessionAssignedIpAddress	InetAddress
	jnxL2tpSessionLocalMRU	INTEGER
	jnxL2tpSessionRemoteMRU	INTEGER
	jnxL2tpSessionStatsTxSpeed	Unsigned32
	jnxL2tpSessionStatsRxSpeed	Unsigned32
	jnxL2tpSessionStatsCallBearerType	INTEGER
	jnxL2tpSessionStatsFramingType	INTEGER
	jnxL2tpSessionStatsLCPRenegotiation	INTEGER
	jnxL2tpSessionStatsAuthMethod	INTEGER
	jnxL2tpSessionStatsNasIpAddrType	InetAddressType
	jnxL2tpSessionStatsNasIpAddress	InetAddress
	jnxL2tpSessionStatsNasIpPort	InetPortNumber
	jnxL2tpSessionStatsFramedProtocol	INTEGER
	jnxL2tpSessionStatsFramedIpAddrType	InetAddressType
	jnxL2tpSessionStatsFramedIpAddress	InetAddress
	jnxL2tpSessionStatsCallingStationID	SnmpAdminString
	jnxL2tpSessionStatsCalledStationID	SnmpAdminString
	jnxL2tpSessionStatsAcctDelayTime	Integer32
	jnxL2tpSessionStatsAcctSessionID	SnmpAdminString
	jnxL2tpSessionStatsAcctMethod	INTEGER
	jnxL2tpSessionStatsAcctSessionTime	Gauge32
	jnxL2tpSessionStatsAcctNasPortType	INTEGER
	jnxL2tpSessionStatsAcctTnlClientEndPoint	Integer32
	jnxL2tpSessionStatsAcctTnlServerEndPoint	Integer32
	jnxL2tpSessionStatsAcctTnlClientAuthID	SnmpAdminString
	jnxL2tpSessionStatsAcctTnlServerAuthID	SnmpAdminString
	jnxL2tpSessionStatsUserProfileName	SnmpAdminString
	jnxL2tpSessionStatsInterfaceID	SnmpAdminString
	jnxL2tpSessionStatsCallSerialNumber	Unsigned32
	jnxL2tpSessionStatsCreationTime	DateAndTime
	jnxL2tpSessionStatsUpTime	TimeTicks
	jnxL2tpSessionStatsIdleTime	TimeTicks
	jnxL2tpSessionStatsCollectionStart	DateAndTime
	jnxL2tpSessionStatsControlTxPkts	Counter32
	jnxL2tpSessionStatsControlTxBytes	Counter64
	jnxL2tpSessionStatsControlRxPkts	Counter32
	jnxL2tpSessionStatsControlRxBytes	Counter64
	jnxL2tpSessionStatsDataTxPkts	Counter32
	jnxL2tpSessionStatsDataTxBytes	Counter64
	jnxL2tpSessionStatsDataRxPkts	Counter32
	jnxL2tpSessionStatsDataRxBytes	Counter64
	jnxL2tpSessionStatsErrorTxPkts	Counter32
	jnxL2tpSessionStatsErrorRxPkts	Counter32
	jnxL2tpSessionStatsControlTxBytes32	Counter32
	jnxL2tpSessionStatsControlRxBytes32	Counter32
	jnxL2tpSessionStatsDataTxPkts64	Counter64
	jnxL2tpSessionStatsDataRxPkts64	Counter64

JnxL2tpMlpppBundleStatsEntry
SEQUENCE
	jnxL2tpMlpppBundleStatsBundleID	Integer32
	jnxL2tpMlpppBundleStatsNumLinks	Integer32
	jnxL2tpMlpppBundleStatsEndpoint	SnmpAdminString
	jnxL2tpMlpppBundleStatsInputMrru	Integer32
	jnxL2tpMlpppBundleStatsOutputMrru	Integer32

Defined Values

jnxL2tp		1.3.6.1.4.1.2636.3.49.1
Provides monitoring information regarding the Layer Two Transport Protocol. This MIB is based on the standard MIB defined in RFC 3371. However, there are significant differences including the INDEX fields of l2tpTunnelStatsTable and l2tpSessionStatsTable.
MODULE-IDENTITY

jnxL2tpObjects		1.3.6.1.4.1.2636.3.49.1.1
OBJECT IDENTIFIER

jnxL2tpScalar		1.3.6.1.4.1.2636.3.49.1.1.1
OBJECT IDENTIFIER

jnxL2tpStats		1.3.6.1.4.1.2636.3.49.1.1.1.1
OBJECT IDENTIFIER

jnxL2tpStatsTotalTunnels		1.3.6.1.4.1.2636.3.49.1.1.1.1.1
This object returns the total number of tunnels that are currently in the established state. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpStatsTotalSessions		1.3.6.1.4.1.2636.3.49.1.1.1.1.2
This object returns the total number of sessions that are currently in the established state. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpStatsControlRxOctets		1.3.6.1.4.1.2636.3.49.1.1.1.1.3
This object returns the number of control channel octets received by the existing tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpStatsControlRxPkts		1.3.6.1.4.1.2636.3.49.1.1.1.1.4
This object returns the number of control packets received by the existing tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpStatsControlTxOctets		1.3.6.1.4.1.2636.3.49.1.1.1.1.5
This object returns the number of control channel octets that were transmitted to the existing tunnel endpoints. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpStatsControlTxPkts		1.3.6.1.4.1.2636.3.49.1.1.1.1.6
This object returns the number of control packets that were transmitted to the existing tunnel endpoints.This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpStatsPayloadRxOctets		1.3.6.1.4.1.2636.3.49.1.1.1.1.7
This object returns the number of payload channel octets that were received on the exisiting tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying. This is deprecated and replaced by jnxL2tpStatsPayloadRxOctets64
Status: deprecated	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpStatsPayloadRxPkts		1.3.6.1.4.1.2636.3.49.1.1.1.1.8
This object returns the number of payload packets that were received on the existing tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	CounterBasedGauge64

jnxL2tpStatsPayloadTxOctets		1.3.6.1.4.1.2636.3.49.1.1.1.1.9
This object returns the number of payload channel octets that were transmitted to the existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	CounterBasedGauge64

jnxL2tpStatsPayloadTxPkts		1.3.6.1.4.1.2636.3.49.1.1.1.1.10
This object returns the number of payload packets that were transmitted to existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	CounterBasedGauge64

jnxL2tpStatsErrorTxPkts		1.3.6.1.4.1.2636.3.49.1.1.1.1.11
This object returns the number of errored packet transmission attempts to the existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	CounterBasedGauge64

jnxL2tpStatsErrorRxPkts		1.3.6.1.4.1.2636.3.49.1.1.1.1.12
This object returns the number of errored packets that were received from the existing tunnel peers. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	CounterBasedGauge64

jnxL2tpStatsPayloadRxOctets64		1.3.6.1.4.1.2636.3.49.1.1.1.1.13
This object returns the number of payload channel octets that were received on the exisiting tunnels. This is an instantaneously accumulated value which can increase or decrease depending on number of tunnels established at the time of querying.
Status: current	Access: read-only
OBJECT-TYPE
	CounterBasedGauge64

jnxL2tpTunnelGroupStatsTable		1.3.6.1.4.1.2636.3.49.1.1.2
The L2TP tunnel group status and statistics table. This table contains objects that can be used to describe the current status and statistics of a single L2TP tunnel group.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxL2tpTunnelGroupStatsEntry

jnxL2tpTunnelGroupStatsEntry		1.3.6.1.4.1.2636.3.49.1.1.2.1
An L2TP tunnel group stats entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxL2tpTunnelGroupStatsEntry

jnxL2tpTunnelGroupStatsTnlGrpName		1.3.6.1.4.1.2636.3.49.1.1.2.1.1
This object contains the name of this tunnel group.
Status: current	Access: not-accessible
OBJECT-TYPE
	OCTET STRING	Size(1..128)

jnxL2tpTunnelGroupStatsGatewayAddrType		1.3.6.1.4.1.2636.3.49.1.1.2.1.2
This object contains the type of local IP address for L2TP tunnels that are part of this group.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

jnxL2tpTunnelGroupStatsGatewayAddr		1.3.6.1.4.1.2636.3.49.1.1.2.1.3
This object contains the local IP address for L2TP tunnels that are part of this group.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

jnxL2tpTunnelGroupStatsSvcIntfName		1.3.6.1.4.1.2636.3.49.1.1.2.1.4
This object contains the name of the service interface that is hosting this tunnel group.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpTunnelGroupStatsTotalTunnels		1.3.6.1.4.1.2636.3.49.1.1.2.1.5
This object returns the total number of tunnels that are currently in the established state in this tunnel group.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpTunnelGroupStatsTotalSessions		1.3.6.1.4.1.2636.3.49.1.1.2.1.6
This object returns the total number of sessions that are currently in the established state in this tunnel group.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpTunnelStatsTable		1.3.6.1.4.1.2636.3.49.1.1.3
The L2TP tunnel status and statistics table. This table contains objects that can be used to describe the current status and statistics of a single L2TP tunnel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxL2tpTunnelStatsEntry

jnxL2tpTunnelStatsEntry		1.3.6.1.4.1.2636.3.49.1.1.3.1
An L2TP tunnel interface stats entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxL2tpTunnelStatsEntry

jnxL2tpTunnelStatsLocalTID		1.3.6.1.4.1.2636.3.49.1.1.3.1.1
This object contains the local tunnel Identifier.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

jnxL2tpTunnelStatsServiceInterface		1.3.6.1.4.1.2636.3.49.1.1.3.1.2
This object contains the name of the service interface on which this tunnel is being hosted.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpTunnelStatsTunnelGroup		1.3.6.1.4.1.2636.3.49.1.1.3.1.3
This object contains the name of the tunnel group that this tunnel is part of.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpTunnelStatsRemoteTID		1.3.6.1.4.1.2636.3.49.1.1.3.1.4
This object contains the remote tunnel Identifier.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

jnxL2tpTunnelStatsRemoteIpAddrType		1.3.6.1.4.1.2636.3.49.1.1.3.1.5
This object contains the type of the remote end address of this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

jnxL2tpTunnelStatsRemoteIpAddress		1.3.6.1.4.1.2636.3.49.1.1.3.1.6
This object contains the remote end address of this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

jnxL2tpTunnelStatsRemoteUdpPort		1.3.6.1.4.1.2636.3.49.1.1.3.1.7
This object contains the remote end UDP port of this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber

jnxL2tpTunnelStatsActiveSessions		1.3.6.1.4.1.2636.3.49.1.1.3.1.8
This object contains the total number of sessions in the established state for this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpTunnelStatsState		1.3.6.1.4.1.2636.3.49.1.1.3.1.9
This field contains the current state of the control tunnel - one of the internal tunnel state names as described below: cc_responder_accept_new The tunnel has received and accepted the start control connection request (SCCRQ) cc_responder_reject_new The tunnel has received and rejected the SCCRQ cc_responder_idle The tunnel has just been created cc_responder_wait_ctl_conn The tunnel has sent the start control connection response (SCCRP) and is waiting for the start control connection connected (SCCCN) message cleanup The tunnel is being cleaned up closed The tunnel is being closed destroyed The tunnel is being destroyed established The tunnel is operating terminate The tunnel is terminating Unknown The tunnel is not connected to the router.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	cc-responder-accept-new(1), cc-responder-reject-new(2), cc-responder-idle(3), cc-responder-wait-ctl-conn(4), cleanup(5), closed(6), destroyed(7), established(8), terminate(9), unknown(10)

jnxL2tpTunnelStatsLocalIpAddrType		1.3.6.1.4.1.2636.3.49.1.1.3.1.10
This object contains the type of the local end address of this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

jnxL2tpTunnelStatsLocalIpAddress		1.3.6.1.4.1.2636.3.49.1.1.3.1.11
This object contains the local end address of this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

jnxL2tpTunnelStatsLocalUdpPort		1.3.6.1.4.1.2636.3.49.1.1.3.1.12
This object contains the local end UDP port of this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber

jnxL2tpTunnelStatsLocalHostName		1.3.6.1.4.1.2636.3.49.1.1.3.1.13
This object contains the local host name of this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpTunnelStatsRemoteHostName		1.3.6.1.4.1.2636.3.49.1.1.3.1.14
This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpTunnelMaxSessions		1.3.6.1.4.1.2636.3.49.1.1.3.1.15
This object represents the maximum number of sessions configured on this tunnel. It could be any positive number or unlimited (0).
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

jnxL2tpTunnelStatsWindowSize		1.3.6.1.4.1.2636.3.49.1.1.3.1.16
This object contains the send window size for this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

jnxL2tpTunnelStatsHelloInterval		1.3.6.1.4.1.2636.3.49.1.1.3.1.17
This object contains the hello interval for this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

jnxL2tpTunnelStatsCreationTime		1.3.6.1.4.1.2636.3.49.1.1.3.1.18
This object represents the time of creation of this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

jnxL2tpTunnelStatsUpTime		1.3.6.1.4.1.2636.3.49.1.1.3.1.19
This object represents the time elapsed since this tunnel was established.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

jnxL2tpTunnelStatsIdleTime		1.3.6.1.4.1.2636.3.49.1.1.3.1.20
This object represents the time elapsed since this tunnel had last data activity (transmission or reception).
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

jnxL2tpTunnelStatsCollectionStart		1.3.6.1.4.1.2636.3.49.1.1.3.1.21
This object represents the time at which the statistics gathering started for this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

jnxL2tpTunnelStatsControlTxPkts		1.3.6.1.4.1.2636.3.49.1.1.3.1.22
This object contains the number of control packets that were transmitted to the tunnel peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpTunnelStatsControlTxBytes		1.3.6.1.4.1.2636.3.49.1.1.3.1.23
This object contains the number of control bytes that were transmitted to the tunnel peer. This is deprecated and replaced by jnxL2tpTunnelStatsControlTxBytes32
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpTunnelStatsControlRxPkts		1.3.6.1.4.1.2636.3.49.1.1.3.1.24
This object contains the number of control packets received on the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpTunnelStatsControlRxBytes		1.3.6.1.4.1.2636.3.49.1.1.3.1.25
This object contains the number of control bytes that were received from the tunnel peer. This has been deprecated and replaced by jnxL2tpTunnelStatsControlRxBytes32
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpTunnelStatsDataTxPkts		1.3.6.1.4.1.2636.3.49.1.1.3.1.26
This object contains the number of data packets transmitted to the tunnel. This has been deprecated and replaced by jnxL2tpTunnelStatsDataTxPkts64
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpTunnelStatsDataTxBytes		1.3.6.1.4.1.2636.3.49.1.1.3.1.27
This object contains the number of data bytes that were transmitted to the tunnel peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpTunnelStatsDataRxPkts		1.3.6.1.4.1.2636.3.49.1.1.3.1.28
This object contains the number of data packets received from this tunnel. This is deprecated and replaced by jnxL2tpTunnelStatsDataRxPkts64
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpTunnelStatsDataRxBytes		1.3.6.1.4.1.2636.3.49.1.1.3.1.29
This object contains the number of data bytes that were received from the tunnel peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpTunnelStatsErrorTxPkts		1.3.6.1.4.1.2636.3.49.1.1.3.1.30
This object contains the number of error transmit packets on the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpTunnelStatsErrorRxPkts		1.3.6.1.4.1.2636.3.49.1.1.3.1.31
This object contains the number of error receive packets on the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpTunnelStatsControlTxBytes32		1.3.6.1.4.1.2636.3.49.1.1.3.1.32
This object contains the number of control bytes that were transmitted to the tunnel peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpTunnelStatsControlRxBytes32		1.3.6.1.4.1.2636.3.49.1.1.3.1.33
This object contains the number of control bytes that were received from the tunnel peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpTunnelStatsDataTxPkts64		1.3.6.1.4.1.2636.3.49.1.1.3.1.34
This object contains the number of data packets transmitted to the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpTunnelStatsDataRxPkts64		1.3.6.1.4.1.2636.3.49.1.1.3.1.35
This object contains the number of data packets received from this tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpSessionStatsTable		1.3.6.1.4.1.2636.3.49.1.1.4
The L2TP session status and statistics table. This table contains the objects that can be used to describe the current status and statistics of a single L2TP tunneled session.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxL2tpSessionStatsEntry

jnxL2tpSessionStatsEntry		1.3.6.1.4.1.2636.3.49.1.1.4.1
An L2TP session interface stats entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxL2tpSessionStatsEntry

jnxL2tpSessionStatsLocalTID		1.3.6.1.4.1.2636.3.49.1.1.4.1.1
This object contains the local tunnel Identifier.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

jnxL2tpSessionStatsLocalSID		1.3.6.1.4.1.2636.3.49.1.1.4.1.2
This object contains the local session Identifier.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..65535

jnxL2tpSessionStatsServiceInterface		1.3.6.1.4.1.2636.3.49.1.1.4.1.3
This object contains the name of the service interface on which this session is being hosted.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsTunnelGroup		1.3.6.1.4.1.2636.3.49.1.1.4.1.4
This object contains the name of the tunnel group that this session is part of.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsRemoteSID		1.3.6.1.4.1.2636.3.49.1.1.4.1.5
This object contains the remote end assigned session identifier for this session. When a session is starting this value may be zero until the remote tunnel endpoint has responded.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

jnxL2tpSessionStatsInterfaceUnit		1.3.6.1.4.1.2636.3.49.1.1.4.1.6
This object contains the interface unit number corresponding to the logical service interface on which the session is being hosted.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

jnxL2tpSessionStatsEncapType		1.3.6.1.4.1.2636.3.49.1.1.4.1.7
This object contains the tunnel encapsulation type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ppp(1), multilink-ppp(2), unknown(3)

jnxL2tpSessionStatsBundleID		1.3.6.1.4.1.2636.3.49.1.1.4.1.8
This object identifies the bundle that this session is a link of. This field is valid only for tunnel encapsulation type multilink-ppp.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65536

jnxL2tpSessionStatsState		1.3.6.1.4.1.2636.3.49.1.1.4.1.9
This field contains the current state of the session - one of the internal session related state names as described below: established The session is operating closed The session is being closed destroyed The session is being destroyed cleanup The session is being cleaned up lns_ic_accept_new A new session is being accepted lns_ic_idle The session has been created and is idle lns_ic_reject_new The new session is being rejected lns_ic_wait_connect The session is waiting for the peer's incoming call connected (ICCN) message.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	established(1), closed(2), destroyed(3), cleanup(4), lns-ic-accept-new(5), lns-ic-idle(6), lns-ic-reject-new(7), lns-ic-wait-connect(8)

jnxL2tpSessionStatsUserName		1.3.6.1.4.1.2636.3.49.1.1.4.1.10
This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsMode		1.3.6.1.4.1.2636.3.49.1.1.4.1.11
This object identifies the configured mode value for this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	shared(1), dedicate(2), unknown(3)

jnxL2tpSessionStatsLocalAddrType		1.3.6.1.4.1.2636.3.49.1.1.4.1.12
This object contains the type of the local end address of the tunnel that is hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

jnxL2tpSessionStatsLocalAddress		1.3.6.1.4.1.2636.3.49.1.1.4.1.13
This object contains the local end address of the tunnel that is hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

jnxL2tpSessionStatsLocalUdpPort		1.3.6.1.4.1.2636.3.49.1.1.4.1.14
This object contains the UDP port of the local end of the tunnel that is hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber

jnxL2tpSessionStatsRemoteAddrType		1.3.6.1.4.1.2636.3.49.1.1.4.1.15
This object contains the type of the remote end address of the tunnel hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

jnxL2tpSessionStatsRemoteAddress		1.3.6.1.4.1.2636.3.49.1.1.4.1.16
This object contains the remote end address of the tunnel hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

jnxL2tpSessionStatsRemoteUdpPort		1.3.6.1.4.1.2636.3.49.1.1.4.1.17
This object contains the UDP port of the remote end of the tunnel hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber

jnxL2tpSessionStatsLocalHostName		1.3.6.1.4.1.2636.3.49.1.1.4.1.18
This object contains the local host name of the tunnel that is hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsRemoteHostName		1.3.6.1.4.1.2636.3.49.1.1.4.1.19
This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionAssignedIpAddrType		1.3.6.1.4.1.2636.3.49.1.1.4.1.20
This object contains the type of IP address of PPP client being tunneled as obtained from IPCP configuration during session establishment.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

jnxL2tpSessionAssignedIpAddress		1.3.6.1.4.1.2636.3.49.1.1.4.1.21
This object contains the IP address of the PPP client being tunneled as obtained from IPCP configuration during session establishment.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

jnxL2tpSessionLocalMRU		1.3.6.1.4.1.2636.3.49.1.1.4.1.22
The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

jnxL2tpSessionRemoteMRU		1.3.6.1.4.1.2636.3.49.1.1.4.1.23
The current value of the MRU for the remote PPP Entity. This value is the MRU that the local entity is using when sending packets to the remote PPP client.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

jnxL2tpSessionStatsTxSpeed		1.3.6.1.4.1.2636.3.49.1.1.4.1.24
This object returns the last known transmit baud rate for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

jnxL2tpSessionStatsRxSpeed		1.3.6.1.4.1.2636.3.49.1.1.4.1.25
This object returns the last known receive baud rate for this session established.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

jnxL2tpSessionStatsCallBearerType		1.3.6.1.4.1.2636.3.49.1.1.4.1.26
This object describes the bearer type of this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), digital(2), analog(3)

jnxL2tpSessionStatsFramingType		1.3.6.1.4.1.2636.3.49.1.1.4.1.27
This object describes the framing type of this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), sync(2), async(3)

jnxL2tpSessionStatsLCPRenegotiation		1.3.6.1.4.1.2636.3.49.1.1.4.1.28
This object returns whether LCP renegotiation is on or off for this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

jnxL2tpSessionStatsAuthMethod		1.3.6.1.4.1.2636.3.49.1.1.4.1.29
This object contains the proxy authentication method employed by the LAC for the session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), text(2), pppChap(3), pppPap(4), pppEap(5), pppMsChapV1(6), pppMsChapV2(7), other(8)

jnxL2tpSessionStatsNasIpAddrType		1.3.6.1.4.1.2636.3.49.1.1.4.1.30
This object contains the type of IP address of the RADIUS network address server to which the accounting records for this session are being sent to.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

jnxL2tpSessionStatsNasIpAddress		1.3.6.1.4.1.2636.3.49.1.1.4.1.31
This object contains the IP address of the RADIUS network address server to which the accounting records for this session are being sent to.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

jnxL2tpSessionStatsNasIpPort		1.3.6.1.4.1.2636.3.49.1.1.4.1.32
This object contains the port on which RADIUS network address server accounting messages will be sent.
Status: current	Access: read-only
OBJECT-TYPE
	InetPortNumber

jnxL2tpSessionStatsFramedProtocol		1.3.6.1.4.1.2636.3.49.1.1.4.1.33
This object contains the frame protocol attribute obtained from RADIUS server for this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ppp(1), slip(2), arap(3), gandalf(4), xylogicsIPX-SLIP(5), x75-sync(6), none(100)

jnxL2tpSessionStatsFramedIpAddrType		1.3.6.1.4.1.2636.3.49.1.1.4.1.34
This Attribute indicates the type of address to be configured for the user, as provided by the RADIUS server in response to authentication request.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

jnxL2tpSessionStatsFramedIpAddress		1.3.6.1.4.1.2636.3.49.1.1.4.1.35
This Attribute indicates the address to be configured for the user, as provided by the RADIUS server in response to authentication request.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

jnxL2tpSessionStatsCallingStationID		1.3.6.1.4.1.2636.3.49.1.1.4.1.36
This Attribute allows the RADIUS NAS to send in the Access-Request packet the phone number that the call came from, using Automatic Number Identification (ANI) or similar technology. It is only used in Access-Request packets.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsCalledStationID		1.3.6.1.4.1.2636.3.49.1.1.4.1.37
This Attribute allows the RADIUS NAS to send in the Access-Request packet the phone number that the user called, using Dialed Number Identification (DNIS) or similar technology. It is only used in Access-Request packets.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsAcctDelayTime		1.3.6.1.4.1.2636.3.49.1.1.4.1.38
This attribute indicates how many seconds the RADIUS accounting client has been trying to send a record for, and can be subtracted from the time of arrival on the server to find the approximate time of the event generating this Accounting-Request.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..64

jnxL2tpSessionStatsAcctSessionID		1.3.6.1.4.1.2636.3.49.1.1.4.1.39
This attribute is a unique Accounting ID to make it easy to match start and stop records in a log file.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsAcctMethod		1.3.6.1.4.1.2636.3.49.1.1.4.1.40
This object contains the accounting method employed for this session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	radius(1), local(2)

jnxL2tpSessionStatsAcctSessionTime		1.3.6.1.4.1.2636.3.49.1.1.4.1.41
This attribute indicates how many seconds the user has received service for.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

jnxL2tpSessionStatsAcctNasPortType		1.3.6.1.4.1.2636.3.49.1.1.4.1.42
This Attribute indicates the type of the physical port of the NAS which is performing accounting for the user.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	async(1), sync(2), isdn-sync(3), isdn-asunc-v-120(4), isdn-async-v-110(5), virtual(6), piafs(7), hdlc-clear-channel(8), x-25(9), x-75(10), g-3-fax(11), sdsl(12), adsl-cap(13), adsl-dmt(14), idsl(15), ethernet(16), xdsl(17), cable(18), wireless-other(19), wireless-ieee-802-1(20)

jnxL2tpSessionStatsAcctTnlClientEndPoint		1.3.6.1.4.1.2636.3.49.1.1.4.1.43
This object contains the remote tunnel Identifier of the tunnel hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

jnxL2tpSessionStatsAcctTnlServerEndPoint		1.3.6.1.4.1.2636.3.49.1.1.4.1.44
This object contains the local tunnel Identifier of the tunnel hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

jnxL2tpSessionStatsAcctTnlClientAuthID		1.3.6.1.4.1.2636.3.49.1.1.4.1.45
This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer, for the tunnel that is hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsAcctTnlServerAuthID		1.3.6.1.4.1.2636.3.49.1.1.4.1.46
This object contains the local host name of the tunnel that is hosting this session.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsUserProfileName		1.3.6.1.4.1.2636.3.49.1.1.4.1.47
This object contains the configured access profile name that is being used for this session.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsInterfaceID		1.3.6.1.4.1.2636.3.49.1.1.4.1.48
This object contains the interface identification (name) for the session bearing service interface.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpSessionStatsCallSerialNumber		1.3.6.1.4.1.2636.3.49.1.1.4.1.49
This object contains the serial number that has been assigned to this session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

jnxL2tpSessionStatsCreationTime		1.3.6.1.4.1.2636.3.49.1.1.4.1.50
This object represents the time of creation of this session.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

jnxL2tpSessionStatsUpTime		1.3.6.1.4.1.2636.3.49.1.1.4.1.51
This object represents the time elapsed since this session was established.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

jnxL2tpSessionStatsIdleTime		1.3.6.1.4.1.2636.3.49.1.1.4.1.52
This object represents the time elapsed since this session had last data activity (transmission or reception).
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

jnxL2tpSessionStatsCollectionStart		1.3.6.1.4.1.2636.3.49.1.1.4.1.53
This object represents the time at which the statistics gathering started for this session.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

jnxL2tpSessionStatsControlTxPkts		1.3.6.1.4.1.2636.3.49.1.1.4.1.54
This object contains the number of control packets that were transmitted to the session peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpSessionStatsControlTxBytes		1.3.6.1.4.1.2636.3.49.1.1.4.1.55
This object contains the number of control bytes that were transmitted to the session peer. This is deprecated and replaced by jnxL2tpSessionStatsControlTxBytes32
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpSessionStatsControlRxPkts		1.3.6.1.4.1.2636.3.49.1.1.4.1.56
This object contains the number of control packets received on the session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpSessionStatsControlRxBytes		1.3.6.1.4.1.2636.3.49.1.1.4.1.57
This object contains the number of control bytes that were received from the session peer. This is deprecated and replaced by jnxL2tpSessionStatsControlRxBytes32
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpSessionStatsDataTxPkts		1.3.6.1.4.1.2636.3.49.1.1.4.1.58
This object contains the number of data packets transmitted to the remote session peer. This is deprecated and replaced by jnxL2tpSessionStatsDataTxPkts64
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpSessionStatsDataTxBytes		1.3.6.1.4.1.2636.3.49.1.1.4.1.59
This object contains the number of data bytes that were transmitted to the session peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpSessionStatsDataRxPkts		1.3.6.1.4.1.2636.3.49.1.1.4.1.60
This object contains the number of data packets received on this session. This is deprecated and replaced by jnxL2tpSessionStatsDataRxPkts64
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpSessionStatsDataRxBytes		1.3.6.1.4.1.2636.3.49.1.1.4.1.61
This object contains the number of data bytes that were received from the session peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpSessionStatsErrorTxPkts		1.3.6.1.4.1.2636.3.49.1.1.4.1.62
This object contains the number of error transmit packets on the session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpSessionStatsErrorRxPkts		1.3.6.1.4.1.2636.3.49.1.1.4.1.63
This object contains the number of error receive packets on the session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpSessionStatsControlTxBytes32		1.3.6.1.4.1.2636.3.49.1.1.4.1.64
This object contains the number of control bytes that were transmitted to the session peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpSessionStatsControlRxBytes32		1.3.6.1.4.1.2636.3.49.1.1.4.1.65
This object contains the number of control bytes that were received from the session peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

jnxL2tpSessionStatsDataTxPkts64		1.3.6.1.4.1.2636.3.49.1.1.4.1.66
This object contains the number of data packets transmitted to the remote session peer.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpSessionStatsDataRxPkts64		1.3.6.1.4.1.2636.3.49.1.1.4.1.67
This object contains the number of data packets received on this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

jnxL2tpMlpppBundleStatsTable		1.3.6.1.4.1.2636.3.49.1.1.5
The L2TP MLPPP bundle status and statistics table. This table contains the objects that can be used to describe the current status and statistics of a single L2TP tunneled multilink PPP bundle.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		JnxL2tpMlpppBundleStatsEntry

jnxL2tpMlpppBundleStatsEntry		1.3.6.1.4.1.2636.3.49.1.1.5.1
An L2TP MLPPP bundle statistics entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	JnxL2tpMlpppBundleStatsEntry

jnxL2tpMlpppBundleStatsBundleID		1.3.6.1.4.1.2636.3.49.1.1.5.1.1
This object identifies the session's associated bundle.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65536

jnxL2tpMlpppBundleStatsNumLinks		1.3.6.1.4.1.2636.3.49.1.1.5.1.2
This object identifies the current number of links that have joined the bundle.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..8

jnxL2tpMlpppBundleStatsEndpoint		1.3.6.1.4.1.2636.3.49.1.1.5.1.3
This object identifies the username of the MLPPP bundle.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

jnxL2tpMlpppBundleStatsInputMrru		1.3.6.1.4.1.2636.3.49.1.1.5.1.4
This object identifies the maximum packet size that the input inteface can process.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	64..4500

jnxL2tpMlpppBundleStatsOutputMrru		1.3.6.1.4.1.2636.3.49.1.1.5.1.5
This object identifies the maximum packet size that the output interface can process.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	64..4500