JUNIPER-DFC-MIB

File: JUNIPER-DFC-MIB.mib (30314 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
IF-MIB JUNIPER-SMI

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE Unsigned32 Counter64
DisplayString SnmpAdminString InterfaceIndex
jnxMibs jnxDfcNotifications

Defined Types

JnxDfcCSEntry  
SEQUENCE    
  jnxDfcGrpName DisplayString
  jnxDfcCSId DisplayString
  jnxDfcCSControlProtocolAddRequests Counter64
  jnxDfcCSCriteriaAdded Counter64
  jnxDfcCSCriteriaAdditionFailed Counter64
  jnxDfcCSControlProtocolDeleteRequests Counter64
  jnxDfcCSCriteriaDeleted Counter64
  jnxDfcCSCriteriaDeletionFailed Counter64
  jnxDfcCSCriteriaDeletedTimeoutIdle Counter64
  jnxDfcCSCriteriaDeletedTimeoutTotal Counter64
  jnxDfcCSCriteriaDeletedPackets Counter64
  jnxDfcCSCriteriaDeletedBytes Counter64
  jnxDfcCSControlProtocolRefreshRequests Counter64
  jnxDfcCSCriteriaRefreshed Counter64
  jnxDfcCSCriteriaRefreshFailed Counter64
  jnxDfcCSControlProtocolListRequests Counter64
  jnxDfcCSListSuccess Counter64
  jnxDfcCSListFailed Counter64
  jnxDfcCSControlProtocolNoopRequests Counter64
  jnxDfcCSNoopSuccess Counter64
  jnxDfcCSNoopFailed Counter64
  jnxDfcCSDynamicCriteriaActive Counter64
  jnxDfcCSStaticCriteriaActive Counter64
  jnxDfcCSBadRequest Counter64
  jnxDfcCSResponseSuccessful Counter64
  jnxDfcCSResponseImproperCriteria Counter64
  jnxDfcCSResponseUnknownContentDest Counter64
  jnxDfcCSResponseUnknownCriteriaId Counter64
  jnxDfcCSResponseImproperTimeout Counter64
  jnxDfcCSResponseInvalidAuthentication Counter64
  jnxDfcCSResponseInvalidSequenceNumber Counter64
  jnxDfcCSResponseInternalError Counter64
  jnxDfcCSNotificationRestart Counter64
  jnxDfcCSNotificationRollover Counter64
  jnxDfcCSNotificationNoop Counter64
  jnxDfcCSNotificationTimeout Counter64
  jnxDfcCSNotificationCongestion Counter64
  jnxDfcCSNotificationCongestionDelete Counter64
  jnxDfcCSNotificationDuplicatesDropped Counter64
  jnxDfcCSAddRequestRate Counter64
  jnxDfcCSAddRequestPeakRate Counter64
  jnxDfcCSAggrCriteriaBandwidth Counter64
  jnxDfcCSSequenceNumber Counter64

JnxDfcCDEntry  
SEQUENCE    
  jnxDfcCDId DisplayString
  jnxDfcCDCriteria Counter64
  jnxDfcCDByteRate Counter64
  jnxDfcCDMatchedPackets Counter64
  jnxDfcCDMatchedBytes Counter64
  jnxDfcCDCongestionNotification Counter64

Defined Values

jnxDfc 1.3.6.1.4.1.2636.3.33
This is Juniper Networks' implementation of enterprise specific MIB for Dynamic Flow Capture (DFC)
MODULE-IDENTITY    

jnxDfcCSTable 1.3.6.1.4.1.2636.3.33.1
Statistics information for Control Source.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxDfcCSEntry

jnxDfcCSEntry 1.3.6.1.4.1.2636.3.33.1.1
An entry of DFC Control Source table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxDfcCSEntry  

jnxDfcGrpName 1.3.6.1.4.1.2636.3.33.1.1.1
The name assigned to a DFC group. A DFC group defines a set of DFC PICs that share same static/dynamic configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..64)  

jnxDfcCSId 1.3.6.1.4.1.2636.3.33.1.1.2
Control Source identifier. Control Source identifies Juniper router with one unique Control IP address. There can be multiple IP addresses from which a Control Source can send Control protocol request to Juniper router.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..48)  

jnxDfcCSControlProtocolAddRequests 1.3.6.1.4.1.2636.3.33.1.1.3
Total number of Control protocol Add requests received. The add request specifies a new filter criteria to be merged with the existing tasking list for a given Control Source and Content Destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSCriteriaAdded 1.3.6.1.4.1.2636.3.33.1.1.4
Total number of filter criteria added successfully by the Control Source.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSCriteriaAdditionFailed 1.3.6.1.4.1.2636.3.33.1.1.5
Total number of filter criteria addition failed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSControlProtocolDeleteRequests 1.3.6.1.4.1.2636.3.33.1.1.6
Total number of Control protocol delete requests received. The delete request removes a particular filter criterion.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSCriteriaDeleted 1.3.6.1.4.1.2636.3.33.1.1.7
Total number of filter criteria deleted successfully as requested by Control Source.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSCriteriaDeletionFailed 1.3.6.1.4.1.2636.3.33.1.1.8
Total number of filter criteria deletion failed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSCriteriaDeletedTimeoutIdle 1.3.6.1.4.1.2636.3.33.1.1.9
Total number of criteria deleted by timeout idle.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSCriteriaDeletedTimeoutTotal 1.3.6.1.4.1.2636.3.33.1.1.10
Total number of criteria deleted by timeout total.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSCriteriaDeletedPackets 1.3.6.1.4.1.2636.3.33.1.1.11
Total number of criteria deleted by packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSCriteriaDeletedBytes 1.3.6.1.4.1.2636.3.33.1.1.12
Total number of criteria deleted by bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSControlProtocolRefreshRequests 1.3.6.1.4.1.2636.3.33.1.1.13
Total number of Control protocol Refresh requests received. The refresh request updates the timeout for a particular filter criterion or set of filter criteria for the particular Control Source to a particular Content Destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSCriteriaRefreshed 1.3.6.1.4.1.2636.3.33.1.1.14
Total number of filter criteria refreshed successfully as requested by Control Source.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSCriteriaRefreshFailed 1.3.6.1.4.1.2636.3.33.1.1.15
Total number of filter criteria refresh request failed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSControlProtocolListRequests 1.3.6.1.4.1.2636.3.33.1.1.16
Total number of Control protocol List requests received. The List request returns a list of all criteria that a particular Control Source has added and are currently active.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSListSuccess 1.3.6.1.4.1.2636.3.33.1.1.17
Total number of list commands processed successfully as requested by Control Source.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSListFailed 1.3.6.1.4.1.2636.3.33.1.1.18
Total number of list commands that could not be processed successfully.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSControlProtocolNoopRequests 1.3.6.1.4.1.2636.3.33.1.1.19
Total number of Control protocol Noop requests received. The purpose of this request is to verify the end-to-end connectivity between Control Source and DFC PIC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSNoopSuccess 1.3.6.1.4.1.2636.3.33.1.1.20
Total number of Noop requests processed successfully as requested by Control Source.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSNoopFailed 1.3.6.1.4.1.2636.3.33.1.1.21
Total number of Noop requests that could not be processed successfully.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSDynamicCriteriaActive 1.3.6.1.4.1.2636.3.33.1.1.22
Total number of active dynamic filter criteria.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSStaticCriteriaActive 1.3.6.1.4.1.2636.3.33.1.1.23
Total number of active static filter criteria.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSBadRequest 1.3.6.1.4.1.2636.3.33.1.1.24
Total number of Bad requests received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSResponseSuccessful 1.3.6.1.4.1.2636.3.33.1.1.25
Total number of successful response(s) corresponding to the requests (add, delete, refresh, list and noop) sent out to the Control Source.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSResponseImproperCriteria 1.3.6.1.4.1.2636.3.33.1.1.26
Total number of response(s) generated because of improper filter criterion specification in the add request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSResponseUnknownContentDest 1.3.6.1.4.1.2636.3.33.1.1.27
Total number of response(s) generated because of unknown Content Destination specified in the add, delete, refresh and list request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSResponseUnknownCriteriaId 1.3.6.1.4.1.2636.3.33.1.1.28
Total number of response(s) generated because of unknown Criteria Identifier specified in the delete, refresh and list request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSResponseImproperTimeout 1.3.6.1.4.1.2636.3.33.1.1.29
Total number of response(s) generated because of improper timeout specified in the add and refresh request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSResponseInvalidAuthentication 1.3.6.1.4.1.2636.3.33.1.1.30
Total number of response(s) generated because of invalid authentication specified in the add, delete, refresh, list and noop request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSResponseInvalidSequenceNumber 1.3.6.1.4.1.2636.3.33.1.1.31
Total number of response(s) generated because of invalid Sequence Number specified in the add, delete, refresh, list and noop request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSResponseInternalError 1.3.6.1.4.1.2636.3.33.1.1.32
Total number of response(s) generated because of internal error at the DFC PIC in processing a request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSNotificationRestart 1.3.6.1.4.1.2636.3.33.1.1.33
Total number of Restart notifications sent to configured notification-recipients. This notification will be generated when the system experiences a failure such that all the DFC filter criteria are lost.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSNotificationRollover 1.3.6.1.4.1.2636.3.33.1.1.34
Total number of Rollover notifications sent to configured notification-recipients. This notification will be generated when the DFC PIC experiences a sequence number rollover.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSNotificationNoop 1.3.6.1.4.1.2636.3.33.1.1.35
Total number of Noop notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC receives a Noop message with the SendAsync parameter present.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSNotificationTimeout 1.3.6.1.4.1.2636.3.33.1.1.36
Total number of Timeout notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC times out a filter criterion on any one of its configured timeout parameters and the criterion contains a SendTimeoutAsync parameter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSNotificationCongestion 1.3.6.1.4.1.2636.3.33.1.1.37
Total number of Congestion notifications sent to configured notification-recipents. This notification will be generated when the 10-second average packet forwarding rate (in bits/second) summed over all active filter criteria to a configured Content Destination exceeds the configured soft limit for that destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSNotificationCongestionDelete 1.3.6.1.4.1.2636.3.33.1.1.38
Total number of Congestion Delete notifications sent to configured notification-recipents. This notification will be generated when the total 10-second average packet forwarding rate (in bits/second) summed over all active filter criteria to a configured Content Destination exceeds the configured hard limit for that destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSNotificationDuplicatesDropped 1.3.6.1.4.1.2636.3.33.1.1.39
Total number of Duplicates Dropped notifications sent to configured notification-recipents. This notification will be generated when the configurable Maximum Duplicates parameter has been exceeded in such a way as to cause packets matching criteria added by the corresponding Control Source to be dropped.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSAddRequestRate 1.3.6.1.4.1.2636.3.33.1.1.40
The request processing rate (requests processed/second).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSAddRequestPeakRate 1.3.6.1.4.1.2636.3.33.1.1.41
The peak request processing rate (requests processed/second).
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSAggrCriteriaBandwidth 1.3.6.1.4.1.2636.3.33.1.1.42
Bandwidth in bits/second.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCSSequenceNumber 1.3.6.1.4.1.2636.3.33.1.1.43
Protocol sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCDTable 1.3.6.1.4.1.2636.3.33.2
Statistics information for content destination.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxDfcCDEntry

jnxDfcCDEntry 1.3.6.1.4.1.2636.3.33.2.1
An entry of DFC Content-Destination table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxDfcCDEntry  

jnxDfcCDId 1.3.6.1.4.1.2636.3.33.2.1.1
Content Destination identifier. A Content Destination is the recipient of the extracted data, once it is forwarded by the Server.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(0..48)  

jnxDfcCDCriteria 1.3.6.1.4.1.2636.3.33.2.1.2
Total number of filter criteria configured for the Content Destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCDByteRate 1.3.6.1.4.1.2636.3.33.2.1.3
Average data rate (in bytes/second) summed over all active filter criteria to a configured Content Destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCDMatchedPackets 1.3.6.1.4.1.2636.3.33.2.1.4
Total number of packets matching the filter criteria configured for the Content Destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCDMatchedBytes 1.3.6.1.4.1.2636.3.33.2.1.5
Total number of bytes matching the filter criteria configured for the Content Destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcCDCongestionNotification 1.3.6.1.4.1.2636.3.33.2.1.6
Total number of Congestion Notifications sent to a configured notification-recipient.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

jnxDfcNotifyVars 1.3.6.1.4.1.2636.3.33.3
Notification object definitions.
Status: current Access: read-only
OBJECT-IDENTITY    

jnxDfcInterfaceName 1.3.6.1.4.1.2636.3.33.3.1
The textual name of the DFC interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

jnxDfcInputPktRate 1.3.6.1.4.1.2636.3.33.3.2
data packet rate (in packets per second).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcPpsSoftOverloadLowWatermark 1.3.6.1.4.1.2636.3.33.3.3
Configured lowest value for data packet rate (in packets per second).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcPpsSoftOverloadHighWatermark 1.3.6.1.4.1.2636.3.33.3.4
Configured highest value for data packet rate (in packets per second).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcPpsHardOverloadLowWatermark 1.3.6.1.4.1.2636.3.33.3.5
Recommended lowest value for data packet rate (in packets per second).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcPpsHardOverloadHighWatermark 1.3.6.1.4.1.2636.3.33.3.6
Recommended highest value for data packet rate (in packets per second).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcFlowsUsage 1.3.6.1.4.1.2636.3.33.3.7
% usage of total number of flows in system.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcCriteriaUsage 1.3.6.1.4.1.2636.3.33.3.8
% usage of matching criteria for all filters.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcMemSoftOverloadLowWatermark 1.3.6.1.4.1.2636.3.33.3.9
Configured lowest watermark percent for memory load.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcMemSoftOverloadHighWatermark 1.3.6.1.4.1.2636.3.33.3.10
Configured highest watermark percent for memory load.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcFlowLowWatermark 1.3.6.1.4.1.2636.3.33.3.11
Recommended lowest value for number of flows allowed in the system.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcFlowHighWatermark 1.3.6.1.4.1.2636.3.33.3.12
Recommended highest value for number of flows allowed in the system.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcCriteriaLowWatermark 1.3.6.1.4.1.2636.3.33.3.13
Recommended lowest value for number of criterias allowed in the system.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcCriteriaHighWatermark 1.3.6.1.4.1.2636.3.33.3.14
Recommended highest value for number of criterias allowed in the system.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

jnxDfcNotificationPrefix 1.3.6.1.4.1.2636.4.11.0
All DFC notifications are registered under this branch.
Status: current Access: accessible-for-notify
OBJECT-IDENTITY    

jnxDfcSoftPpsThresholdExceeded 1.3.6.1.4.1.2636.4.11.0.1
Notification of input packet rate (in packet per second) going beyond the configured limit.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxDfcSoftPpsUnderThreshold 1.3.6.1.4.1.2636.4.11.0.2
Notification of input packet rate (in packet per second) dropping back to below the configured limit.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxDfcHardPpsThresholdExceeded 1.3.6.1.4.1.2636.4.11.0.3
Notification of input packet rate (in packet per second) going beyond the recommended limit.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxDfcHardPpsUnderThreshold 1.3.6.1.4.1.2636.4.11.0.4
Notification of input packet rate (in packet per second) dropping back to below the recommended limit.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxDfcSoftMemThresholdExceeded 1.3.6.1.4.1.2636.4.11.0.5
Notification of memory overload condition i.e memory usage is going beyond the configured limit.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxDfcSoftMemUnderThreshold 1.3.6.1.4.1.2636.4.11.0.6
Notification of memory usage dropping back to below the configured limit.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxDfcHardMemThresholdExceeded 1.3.6.1.4.1.2636.4.11.0.7
Notification of memory overload condition i.e memory usage is going beyond the recommended limit.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

jnxDfcHardMemUnderThreshold 1.3.6.1.4.1.2636.4.11.0.8
Notification of memory usage dropping back to below the recommended limit.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE