JUNIPER-IFOPTICS-MIB

File: JUNIPER-IFOPTICS-MIB.mib (98069 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
JUNIPER-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE TimeTicks
NOTIFICATION-TYPE Unsigned32 Counter32
Integer32 DateAndTime TEXTUAL-CONVENTION
TruthValue ifIndex ifDescr
jnxOpticsMibRoot jnxOpticsNotifications

Defined Types

JnxOpticsLocation  
Near End or Far End
TEXTUAL-CONVENTION    
  INTEGER jnxNearEnd(1), jnxFarEnd(2)  

JnxOpticsDirection  
Indicates the direction as Rx/Tx or bi-directional.
TEXTUAL-CONVENTION    
  INTEGER jnxTxDir(1), jnxRxDir(2), jnxBiDir(3)  

JnxOpticsSeverity  
Severity of the Notification
TEXTUAL-CONVENTION    
  INTEGER jnxCritical(1), jnxMajor(2), jnxMinor(3), jnxInfo(4)  

JnxOpticsServiceStateAction  
Notification's action on the service state
TEXTUAL-CONVENTION    
  INTEGER jnxNotSupported(0), jnxNonServiceAffecting(1), jnxServiceAffecting(2)  

JnxOpticsChannelSpacing  
Channel spacing 1 - 100 Ghz 2 - 50 GHz 3 - 25 GHz 4 - 12.5 GHz 5 - 6.25 Ghz
TEXTUAL-CONVENTION    
  INTEGER spacing100Ghz(1), spacing50Ghz(2), spacing25Ghz(3), spacing12point5Ghz(4), spacing6point5Ghz(5)  

JnxOpticsNotificationId  
Optic alarm types
TEXTUAL-CONVENTION    
  INTEGER jnxOpticsLOS(1), jnxOpticsWavelenthLockErr(2), jnxOpticsPowerHighAlarm(3), jnxOpticsPowerLowAlarm(4), jnxOpticsBiasCurrentHighAlarm(5), jnxOpticsBiasCurrentLowAlarm(6), jnxOpticsTemperatureHighAlarm(7), jnxOpticsTemperaturelowAlarm(8), jnxOpticsTxPLLLockAlarm(9), jnxOpticsRxPLLLockAlarm(10), jnxOpticsAvgPowerAlarm(11), jnxOpticsRxLossAvgPowerAlarm(12), jnxOpticsLossofACPowerAlarm(13), jnxOpticsTxPowerHighThreshAlert(14), jnxOpticsTxPowerLowThreshAlert(15), jnxOpticsRxPowerHighThreshAlert(16), jnxOpticsRxPowerLowThreshAlert(17), jnxOpticsModuleTempHighThreshAlert(18), jnxOpticsModuleTempLowThreshAlert(19), jnxOptics24HourTxPowerHighThreshAlert(20), jnxOptics24HourTxPowerLowThreshAlert(21), jnxOptics24HourRxPowerHighThreshAlert(22), jnxOptics24HourRxPowerLowThreshAlert(23), jnxOptics24HourModuleTempHighThreshAlert(24), jnxOptics24HourModuleTempLowThreshAlert(25), jnxOpticsRxPowerHighAlarm(26), jnxOpticsRxPowerLowAlarm(27), jnxOpticsTxPowerHighWarning(28), jnxOpticsTxPowerLowWarning(29), jnxOpticsRxPowerHighWarning(30), jnxOpticsRxPowerLowWarning(31), jnxOpticsModuleTempHighWarning(32), jnxOpticsModuleTempLowWarning(33), jnxOpticsRxCarrierFreqHigh(34), jnxOpticsRxCarrierFreqLow(35), jnxOpticsChromaticDispHighWarning(36), jnxOpticsChromaticDispLowWarning(37), jnxOpticsQLowWarning(38), jnxOpticsOSNRLowWarning(39), jnxOpticsCarrierFreqHighAlert(40), jnxOpticsCarrierFreqLowAlert(41), jnxOptics24HourCarrierFreqHighAlert(42), jnxOptics24HourCarrierFreqLowAlert(43)  

JnxOpticsConfigEntry  
SEQUENCE    
  jnxOpticsConfigContainerIndex Integer32
  jnxOpticsConfigL1Index Integer32
  jnxOpticsConfigL2Index Integer32
  jnxOpticsConfigL3Index Integer32
  jnxOpticsType Integer32
  jnxLaserEnable TruthValue
  jnxWavelength Unsigned32
  jnxSpacing JnxOpticsChannelSpacing
  jnxModulation Unsigned32
  jnxTxOpticalPower Integer32
  jnxRxOpticalPower Integer32
  jnxModuleTempHighThresh Integer32
  jnxModuleTempLowThresh Integer32
  jnxTxPowerHighThresh Integer32
  jnxTxPowerLowThresh Integer32
  jnxRxPowerHighThresh Integer32
  jnxRxPowerLowThresh Integer32
  jnx24HourModuleTempHighThresh Integer32
  jnx24HourModuleTempLowThresh Integer32
  jnx24HourTxPowerHighThresh Integer32
  jnx24HourTxPowerLowThresh Integer32
  jnx24HourRxPowerHighThresh Integer32
  jnx24HourRxPowerLowThresh Integer32
  jnxRxLosPowerWarningThresh Integer32
  jnxRxLosPowerAlarmThresh Integer32
  jnxOpticsCurrentStatus BITS
  jnxTxPowerHighEnableTCA TruthValue
  jnxTxPowerLowEnableTCA TruthValue
  jnxRxPowerHighEnableTCA TruthValue
  jnxRxPowerLowEnableTCA TruthValue
  jnxModuleTempHighEnableTCA TruthValue
  jnxModuleTempLowEnableTCA TruthValue
  jnxCarFreqOffsetHighEnableTCA TruthValue
  jnxCarFreqOffsetLowEnableTCA TruthValue
  jnxCarFreqOffsetHighThresh Integer32
  jnx24HourCarFreqOffsetHighThresh Integer32
  jnxCarFreqOffsetLowThresh Integer32
  jnx24HourCarFreqOffsetLowThresh Integer32

JnxOpticsTraceToneCfgEntry  
SEQUENCE    
  jnxOpticsTraceToneCfgContainerIndex Integer32
  jnxOpticsTraceToneCfgL1Index Integer32
  jnxOpticsTraceToneCfgL2Index Integer32
  jnxOpticsTraceToneCfgL3Index Integer32
  jnxOpticsTraceToneCfgTxEnable TruthValue
  jnxOpticsTraceToneCfgRxEnable TruthValue
  jnxOpticsTraceToneCfgDestId OCTET STRING
  jnxOpticsTraceToneCfgTxMsg OCTET STRING
  jnxOpticsTraceToneCfgRxMsg OCTET STRING

JnxOpticsNotificationTrigEntry  
SEQUENCE    
  jnxOpticsNotificationTrigContainerIndex Integer32
  jnxOpticsNotificationTrigL1Index Integer32
  jnxOpticsNotificationTrigL2Index Integer32
  jnxOpticsNotificationTrigL3Index Integer32
  jnxOpticsNotificationTrigAlmId JnxOpticsNotificationId
  jnxOpticsNotificationTrigSeverity JnxOpticsSeverity
  jnxOpticsNotificationTrigIgnore TruthValue
  jnxOpticsNotificationTrigHoldtimeUp Integer32
  jnxOpticsNotificationTrigHoldtimeDown Integer32
  jnxOpticsTrigServiceStateAction JnxOpticsServiceStateAction

JnxOpticsPMCurrentEntry  
SEQUENCE    
  jnxPMCurChromaticDispersion Integer32
  jnxPMCurDiffGroupDelay Integer32
  jnxPMCurPolarizationState Integer32
  jnxPMCurPolarDepLoss Integer32
  jnxPMCurQ Integer32
  jnxPMCurSNR Integer32
  jnxPMCurTxOutputPower Integer32
  jnxPMCurRxInputPower Integer32
  jnxPMCurMinChromaticDispersion Integer32
  jnxPMCurMaxChromaticDispersion Integer32
  jnxPMCurAvgChromaticDispersion Integer32
  jnxPMCurMinDiffGroupDelay Integer32
  jnxPMCurMaxDiffGroupDelay Integer32
  jnxPMCurAvgDiffGroupDelay Integer32
  jnxPMCurMinPolarState Integer32
  jnxPMCurMaxPolarState Integer32
  jnxPMCurAvgPolarState Integer32
  jnxPMCurMinPolarDepLoss Integer32
  jnxPMCurMaxPolarDepLoss Integer32
  jnxPMCurAvgPolarDepLoss Integer32
  jnxPMCurMinQ Integer32
  jnxPMCurMaxQ Integer32
  jnxPMCurAvgQ Integer32
  jnxPMCurMinSNR Integer32
  jnxPMCurMaxSNR Integer32
  jnxPMCurAvgSNR Integer32
  jnxPMCurMinTxOutputPower Integer32
  jnxPMCurMaxTxOutputPower Integer32
  jnxPMCurAvgTxOutputPower Integer32
  jnxPMCurMinRxInputPower Integer32
  jnxPMCurMaxRxInputPower Integer32
  jnxPMCurAvgRxInputPower Integer32
  jnxPMCurSuspectedFlag TruthValue
  jnxPMCurSuspectReason Integer32
  jnxPMCurTxLaserBiasCurrent Integer32
  jnxPMCurMinTxLaserBiasCurrent Integer32
  jnxPMCurMaxTxLaserBiasCurrent Integer32
  jnxPMCurAvgTxLaserBiasCurrent Integer32
  jnxPMCurTemperature Integer32
  jnxPMCurMinTemperature Integer32
  jnxPMCurMaxTemperature Integer32
  jnxPMCurAvgTemperature Integer32
  jnxPMCurCarFreqOffset Integer32
  jnxPMCurMinCarFreqOffset Integer32
  jnxPMCurMaxCarFreqOffset Integer32
  jnxPMCurAvgCarFreqOffset Integer32
  jnxPMCurRxLaserBiasCurrent Integer32
  jnxPMCurMinRxLaserBiasCurrent Integer32
  jnxPMCurMaxRxLaserBiasCurrent Integer32
  jnxPMCurAvgRxLaserBiasCurrent Integer32

JnxOpticsPMIntervalEntry  
SEQUENCE    
  jnxOpticsPMIntervalNumber Unsigned32
  jnxPMIntMinChromaticDispersion Integer32
  jnxPMIntMaxChromaticDispersion Integer32
  jnxPMIntAvgChromaticDispersion Integer32
  jnxPMIntMinDiffGroupDelay Integer32
  jnxPMIntMaxDiffGroupDelay Integer32
  jnxPMIntAvgDiffGroupDelay Integer32
  jnxPMIntMinPolarState Integer32
  jnxPMIntMaxPolarState Integer32
  jnxPMIntAvgPolarState Integer32
  jnxPMIntMinPolarDependentLoss Integer32
  jnxPMIntMaxPolarDependentLoss Integer32
  jnxPMIntAvgPolarDependentLoss Integer32
  jnxPMIntMinQ Integer32
  jnxPMIntMaxQ Integer32
  jnxPMIntAvgQ Integer32
  jnxPMIntMinSNR Integer32
  jnxPMIntMaxSNR Integer32
  jnxPMIntAvgSNR Integer32
  jnxPMIntMinTxOutputPower Integer32
  jnxPMIntMaxTxOutputPower Integer32
  jnxPMIntAvgTxOutputPower Integer32
  jnxPMIntMinRxInputPower Integer32
  jnxPMIntMaxRxInputPower Integer32
  jnxPMIntAvgRxInputPower Integer32
  jnxPMIntTimeStamp DateAndTime
  jnxPMIntSuspectedFlag TruthValue
  jnxPMIntSuspectReason Integer32
  jnxPMIntMinTxLaserBiasCurrent Integer32
  jnxPMIntMaxTxLaserBiasCurrent Integer32
  jnxPMIntAvgTxLaserBiasCurrent Integer32
  jnxPMIntMinTemperature Integer32
  jnxPMIntMaxTemperature Integer32
  jnxPMIntAvgTemperature Integer32
  jnxPMIntMinCarFreqOffset Integer32
  jnxPMIntMaxCarFreqOffset Integer32
  jnxPMIntAvgCarFreqOffset Integer32
  jnxPMIntMinRxLaserBiasCurrent Integer32
  jnxPMIntMaxRxLaserBiasCurrent Integer32
  jnxPMIntAvgRxLaserBiasCurrent Integer32

JnxOpticsPMDayEntry  
SEQUENCE    
  jnxOpticsPMDayIndex Unsigned32
  jnxPMDayMinChromaticDispersion Integer32
  jnxPMDayMaxChromaticDispersion Integer32
  jnxPMDayAvgChromaticDispersion Integer32
  jnxPMDayMinDiffGroupDelay Integer32
  jnxPMDayMaxDiffGroupDelay Integer32
  jnxPMDayAvgDiffGroupDelay Integer32
  jnxPMDayMinPolarState Integer32
  jnxPMDayMaxPolarState Integer32
  jnxPMDayAvgPolarState Integer32
  jnxPMDayMinPolarDependentLoss Integer32
  jnxPMDayMaxPolarDependentLoss Integer32
  jnxPMDayAvgPolarDependentLoss Integer32
  jnxPMDayMinQ Integer32
  jnxPMDayMaxQ Integer32
  jnxPMDayAvgQ Integer32
  jnxPMDayMinSNR Integer32
  jnxPMDayMaxSNR Integer32
  jnxPMDayAvgSNR Integer32
  jnxPMDayMinTxOutputPower Integer32
  jnxPMDayMaxTxOutputPower Integer32
  jnxPMDayAvgTxOutputPower Integer32
  jnxPMDayMinRxInputPower Integer32
  jnxPMDayMaxRxInputPower Integer32
  jnxPMDayAvgRxInputPower Integer32
  jnxPMDayTimeStamp DateAndTime
  jnxPMDaySuspectedFlag TruthValue
  jnxPMDaySuspectReason Integer32
  jnxPMDayMinTxLaserBiasCurrent Integer32
  jnxPMDayMaxTxLaserBiasCurrent Integer32
  jnxPMDayAvgTxLaserBiasCurrent Integer32
  jnxPMDayMinTemperature Integer32
  jnxPMDayMaxTemperature Integer32
  jnxPMDayAvgTemperature Integer32
  jnxPMDayMinCarFreqOffset Integer32
  jnxPMDayMaxCarFreqOffset Integer32
  jnxPMDayAvgCarFreqOffset Integer32
  jnxPMDayMinRxLaserBiasCurrent Integer32
  jnxPMDayMaxRxLaserBiasCurrent Integer32
  jnxPMDayAvgRxLaserBiasCurrent Integer32

JnxOpticsNotificationEntry  
SEQUENCE    
  jnxOpticsNotificationLocation JnxOpticsLocation
  jnxOpticsNotificationDirection JnxOpticsDirection
  jnxOpticsNotificationSeverity JnxOpticsSeverity
  jnxOpticsLastNotificationId JnxOpticsNotificationId
  jnxOpticsNotificationDate DateAndTime

JnxOpticsClearIfPMsEntry  
SEQUENCE    
  jnxOpticsClearCurrent TruthValue
  jnxOpticsClearInterfaceInterval TruthValue
  jnxOpticsClearInterfaceDay TruthValue
  jnxOpticsClearInterfaceAll TruthValue

Defined Values

jnxIfOpticsMib 1.3.6.1.4.1.2636.3.71.1
This MIB module defines objects used for managing the Optics interface for Juniper products.
MODULE-IDENTITY    

jnxOptics 1.3.6.1.4.1.2636.3.71.1.1
OBJECT IDENTIFIER    

jnxOpticsPerformanceMonitoring 1.3.6.1.4.1.2636.3.71.1.2
OBJECT IDENTIFIER    

jnxOpticsAlarm 1.3.6.1.4.1.2636.3.71.1.3
OBJECT IDENTIFIER    

jnxOpticsConfigTable 1.3.6.1.4.1.2636.3.71.1.1.1
Information about the optics config Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxOpticsConfigEntry

jnxOpticsConfigEntry 1.3.6.1.4.1.2636.3.71.1.1.1.1
A conceptual row that contains information about the optics config Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxOpticsConfigEntry  

jnxOpticsConfigContainerIndex 1.3.6.1.4.1.2636.3.71.1.1.1.1.1
The associated jnxContentsContainerIndex - eg shelf..
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsConfigL1Index 1.3.6.1.4.1.2636.3.71.1.1.1.1.2
The level one index associated with this subject ... eg fpc slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsConfigL2Index 1.3.6.1.4.1.2636.3.71.1.1.1.1.3
The level two index associated with this subject .. eg pic slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsConfigL3Index 1.3.6.1.4.1.2636.3.71.1.1.1.1.4
The level three index associated with this subject.. eg port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsType 1.3.6.1.4.1.2636.3.71.1.1.1.1.5
0 - none 1 - SFP 2 - XFP 3 - SFP+ 4 - XFP+ 5 - CFP 6 - CFP+ 7 - Non pluggable
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxLaserEnable 1.3.6.1.4.1.2636.3.71.1.1.1.1.6
0 - laser off 1 - laser on
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxWavelength 1.3.6.1.4.1.2636.3.71.1.1.1.1.7
The transmit wavelength of the laser.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

jnxSpacing 1.3.6.1.4.1.2636.3.71.1.1.1.1.8
A minimum nominal difference in frequency (GHz) between two adjacent channels.
Status: current Access: read-only
OBJECT-TYPE    
  JnxOpticsChannelSpacing  

jnxModulation 1.3.6.1.4.1.2636.3.71.1.1.1.1.9
Modulation Unknown - (1), NonPSK - (2), ODB - (3), DPSK - (4), QPSK - (5), DQPSK - (6), DPQPSK - (7), 16QAM - (8), 64QAM - (9), 256QAM - (10)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

jnxTxOpticalPower 1.3.6.1.4.1.2636.3.71.1.1.1.1.10
Transmit optical power.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxRxOpticalPower 1.3.6.1.4.1.2636.3.71.1.1.1.1.11
Receive optical power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxModuleTempHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.12
High module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxModuleTempLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.13
Low module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxTxPowerHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.14
Tx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxTxPowerLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.15
Tx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxRxPowerHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.16
Rx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxRxPowerLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.17
Rx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnx24HourModuleTempHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.18
High module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnx24HourModuleTempLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.19
Low module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnx24HourTxPowerHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.20
Tx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnx24HourTxPowerLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.21
Tx for a 24 hour period Power below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnx24HourRxPowerHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.22
Rx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnx24HourRxPowerLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.23
Rx Power for a 24 hour period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxRxLosPowerWarningThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.24
Rx Power warning threshold for seeting the optical LOS warning.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxRxLosPowerAlarmThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.25
Rx Power alarm threshold for seeting the optical LOS warning.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxOpticsCurrentStatus 1.3.6.1.4.1.2636.3.71.1.1.1.1.26
Status: current Access: read-only
OBJECT-TYPE    
  BITS opticalLos(1), wavelenthLockErr(2), powerHighAlarm(3), powerLowAlarm(4), biasCurrentHighAlarm(5), biasCurrentLowAlarm(6), temperatureHighAlarm(7), temperaturelowAlarm(8), txPLLLockAlarm(9), rxPLLLockAlarm(10), avgPowerAlarm(11), rxLossAvgPowerAlarm(12), lossofACPowerAlarm(13), txPowerHighThreshAlert(14), txPowerLowThreshAlert(15), rxPowerHighThreshAlert(16), rxPowerLowThreshAlert(17), moduleTempHighThreshAlert(18), moduleTempLowThreshAlert(19), txPowerHigh24HourThreshAlert(20), txPowerLow24HourThreshAlert(21), rxPowerHigh24HourThreshAlert(22), rxPowerLow24HourThreshAlert(23), moduleTempHigh24HourThreshAlert(24), moduleTempLow24HourThreshAlert(25), powerRxHighAlarm(26), powerRxLowAlarm(27), powerTxHighWarning(28), powerTxLowWarning(29), powerRxHighWarning(30), powerRxLowWarning(31), temperatureHighWarning(32), temperaturelowWarning(33)  

jnxTxPowerHighEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.27
Enable/Disable for the Tx Power High TCA.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxTxPowerLowEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.28
Enable/Disable for the Tx Power Low TCA.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxRxPowerHighEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.29
Enable/Disable for the Rx Power High TCA.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxRxPowerLowEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.30
Enable/Disable for the Rx Power Low TCA.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxModuleTempHighEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.31
Enable/Disable for the Module Temp High TCA.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxModuleTempLowEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.32
Enable/Disable for the Module Temp Low TCA.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxCarFreqOffsetHighEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.33
Enable/Disable for the Carrier Frequency Offset High TCA.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxCarFreqOffsetLowEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.34
Enable/Disable for the CarrierFreqOffetLow TCA's.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxCarFreqOffsetHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.35
Carrier frequency offset for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnx24HourCarFreqOffsetHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.36
Carrier frequency offset for a 24 Hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxCarFreqOffsetLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.37
Carrier frequency offset for a 15 minute period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnx24HourCarFreqOffsetLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.38
Carrier frequency offset for a 24 Hour period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxOpticsTraceToneCfgTable 1.3.6.1.4.1.2636.3.71.1.1.2
Information about the optics tests.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxOpticsTraceToneCfgEntry

jnxOpticsTraceToneCfgEntry 1.3.6.1.4.1.2636.3.71.1.1.2.1
Information about the optics FRU's.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxOpticsTraceToneCfgEntry  

jnxOpticsTraceToneCfgContainerIndex 1.3.6.1.4.1.2636.3.71.1.1.2.1.1
The associated jnxContentsContainerIndex - eg shelf..
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsTraceToneCfgL1Index 1.3.6.1.4.1.2636.3.71.1.1.2.1.2
The level one index associated with this subject ... eg fpc slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsTraceToneCfgL2Index 1.3.6.1.4.1.2636.3.71.1.1.2.1.3
The level two index associated with this subject .. eg pic slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsTraceToneCfgL3Index 1.3.6.1.4.1.2636.3.71.1.1.2.1.4
The level three index associated with this subject.. eg port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsTraceToneCfgTxEnable 1.3.6.1.4.1.2636.3.71.1.1.2.1.5
This will enable/disable the transmit Trace tone feature.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxOpticsTraceToneCfgRxEnable 1.3.6.1.4.1.2636.3.71.1.1.2.1.6
This will enable/disable the receive Trace tone feature.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxOpticsTraceToneCfgDestId 1.3.6.1.4.1.2636.3.71.1.1.2.1.7
This is the destination Id of the link ID/ the chassis and the blade. The transmit messages will also have the src id which is this chassis id and this port info.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

jnxOpticsTraceToneCfgTxMsg 1.3.6.1.4.1.2636.3.71.1.1.2.1.8
This will be the transmit data in the tracetone message.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

jnxOpticsTraceToneCfgRxMsg 1.3.6.1.4.1.2636.3.71.1.1.2.1.9
This will be the receive data in the trace tone message.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

jnxOpticsNotificationTrigDefaultHoldtimeUp 1.3.6.1.4.1.2636.3.71.1.1.3
This object will indicate the time (ms) for the defect to persist before it is declared an alarm.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxOpticsNotificationTrigDefaultHoldtimeDown 1.3.6.1.4.1.2636.3.71.1.1.4
This object will indicate the time (ms) for the defect to absent before the alarm is cleared.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxOpticsNotificationTrigTable 1.3.6.1.4.1.2636.3.71.1.1.5
Information about the otn Alarm/Alart/Info trigger table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxOpticsNotificationTrigEntry

jnxOpticsNotificationTrigEntry 1.3.6.1.4.1.2636.3.71.1.1.5.1
A conceptual row that contains information about the Otn Alarm Trigger Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxOpticsNotificationTrigEntry  

jnxOpticsNotificationTrigContainerIndex 1.3.6.1.4.1.2636.3.71.1.1.5.1.1
The associated jnxContentsContainerIndex - eg shelf.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsNotificationTrigL1Index 1.3.6.1.4.1.2636.3.71.1.1.5.1.2
The level one index associated with this subject ... eg fpc slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsNotificationTrigL2Index 1.3.6.1.4.1.2636.3.71.1.1.5.1.3
The level two index associated with this subject .. eg pic slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsNotificationTrigL3Index 1.3.6.1.4.1.2636.3.71.1.1.5.1.4
The level three index associated with this subject.. eg port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..1024  

jnxOpticsNotificationTrigAlmId 1.3.6.1.4.1.2636.3.71.1.1.5.1.5
This will be the type of Alarm as defined by JnxOpticsNotificationId
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxOpticsNotificationId  

jnxOpticsNotificationTrigSeverity 1.3.6.1.4.1.2636.3.71.1.1.5.1.6
This will be the Severity of the Notification.
Status: current Access: read-write
OBJECT-TYPE    
  JnxOpticsSeverity  

jnxOpticsNotificationTrigIgnore 1.3.6.1.4.1.2636.3.71.1.1.5.1.7
This object will ignore the alarm when set.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxOpticsNotificationTrigHoldtimeUp 1.3.6.1.4.1.2636.3.71.1.1.5.1.8
This object will indicate the time (ms) for the defect to persist before it is declared an alarm.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxOpticsNotificationTrigHoldtimeDown 1.3.6.1.4.1.2636.3.71.1.1.5.1.9
This object will indicate the time (ms) the defect is absent before the alarm is cleared.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

jnxOpticsTrigServiceStateAction 1.3.6.1.4.1.2636.3.71.1.1.5.1.10
This will indicate whether this alarm is service affecting or not .
Status: current Access: read-only
OBJECT-TYPE    
  JnxOpticsServiceStateAction  

jnxOpticsPMCurrentTable 1.3.6.1.4.1.2636.3.71.1.2.1
A table of current PM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxOpticsPMCurrentEntry

jnxOpticsPMCurrentEntry 1.3.6.1.4.1.2636.3.71.1.2.1.1
A conceptual row that contains information about the PM Current Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxOpticsPMCurrentEntry  

jnxPMCurChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.1.1.1
Residual Chromatic Dispersion measured at Rx Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.1.1.2
Differential group delay
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurPolarizationState 1.3.6.1.4.1.2636.3.71.1.2.1.1.3
Polarization state
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurPolarDepLoss 1.3.6.1.4.1.2636.3.71.1.2.1.1.4
The polarisation dependent loss (PDL) is the difference (in dB) between the maximum and minimum values of the channel insertion loss (or gain) of the black-link from point SS to RS due to a variation of the state of polarization (SOP) over all SOPs
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurQ 1.3.6.1.4.1.2636.3.71.1.2.1.1.5
'Q' factor estimated at Rx Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurSNR 1.3.6.1.4.1.2636.3.71.1.2.1.1.6
SNR - signal to noise ratio
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.7
TxOutputPower - transmit output power
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.8
RxInputPower - receive output power
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.1.1.9
Min Residual Chromatic Dispersion measured at Rx Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.1.1.10
Max Residual Chromatic Dispersion measured at Rx Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.1.1.11
Average Residual Chromatic Dispersion measured at Rx Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.1.1.12
Min Differential group delay
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.1.1.13
Max Differential group delay
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.1.1.14
Average Differential group delay
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinPolarState 1.3.6.1.4.1.2636.3.71.1.2.1.1.15
Min Polarization state
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxPolarState 1.3.6.1.4.1.2636.3.71.1.2.1.1.16
Max Polarization state
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgPolarState 1.3.6.1.4.1.2636.3.71.1.2.1.1.17
Avg Polarization state
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinPolarDepLoss 1.3.6.1.4.1.2636.3.71.1.2.1.1.18
Min - The polarisation dependent loss (PDL)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxPolarDepLoss 1.3.6.1.4.1.2636.3.71.1.2.1.1.19
Max - The polarisation dependent loss (PDL)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgPolarDepLoss 1.3.6.1.4.1.2636.3.71.1.2.1.1.20
Avg - The polarisation dependent loss (PDL)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinQ 1.3.6.1.4.1.2636.3.71.1.2.1.1.21
Min 'Q' factor estimated at Rx Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxQ 1.3.6.1.4.1.2636.3.71.1.2.1.1.22
Max 'Q' factor estimated at Rx Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgQ 1.3.6.1.4.1.2636.3.71.1.2.1.1.23
Avg 'Q' factor estimated at Rx Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinSNR 1.3.6.1.4.1.2636.3.71.1.2.1.1.24
Min SNR - signal to noise ratio
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxSNR 1.3.6.1.4.1.2636.3.71.1.2.1.1.25
Max SNR - signal to noise ratio
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgSNR 1.3.6.1.4.1.2636.3.71.1.2.1.1.26
Avg SNR - signal to noise ratio
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.27
Min TxOutputPower - transmit output power
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.28
Max TxOutputPower - transmit output power
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.29
Avg TxOutputPower - transmit output power
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.30
Min RxInputPower - receive output power
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.31
Max RxInputPower - receive output power
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.32
Avg RxInputPower - receive output power
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurSuspectedFlag 1.3.6.1.4.1.2636.3.71.1.2.1.1.33
If true, the data in this entry may be unreliable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

jnxPMCurSuspectReason 1.3.6.1.4.1.2636.3.71.1.2.1.1.34
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.35
Trasmit LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.36
Minimum trasmit LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.37
Maximum trasmit LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.38
Average LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurTemperature 1.3.6.1.4.1.2636.3.71.1.2.1.1.39
Temperature measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinTemperature 1.3.6.1.4.1.2636.3.71.1.2.1.1.40
Minimum Temperature measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxTemperature 1.3.6.1.4.1.2636.3.71.1.2.1.1.41
Maximum Temperature measure at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgTemperature 1.3.6.1.4.1.2636.3.71.1.2.1.1.42
Average Temperature measure at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.1.1.43
Carrier frequency offset measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.1.1.44
Minimum Carrier frequency offset measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.1.1.45
Maximum Carrier frequency offset measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.1.1.46
Average Carrier frequency offset measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.47
Received LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMinRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.48
Received Minimum LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurMaxRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.49
Received Maximum LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMCurAvgRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.50
Received Average LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxOpticsPMIntervalTable 1.3.6.1.4.1.2636.3.71.1.2.2
A table of current PM entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxOpticsPMIntervalEntry

jnxOpticsPMIntervalEntry 1.3.6.1.4.1.2636.3.71.1.2.2.1
A conceptual row that contains information about the PM Interval Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxOpticsPMIntervalEntry  

jnxOpticsPMIntervalNumber 1.3.6.1.4.1.2636.3.71.1.2.2.1.1
This is the 15 mintute interavl number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..96  

jnxPMIntMinChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.2.1.2
Residual Chromatic Dispersion measured at Rx Transceiver port - min in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.2.1.3
Residual Chromatic Dispersion measured at Rx Transceiver port - max in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.2.1.4
Residual Chromatic Dispersion measured at Rx Transceiver port - average in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.2.1.5
Differential group delay measured at Rx Transceiver port -- min in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.2.1.6
Differential group delay measured at Rx Transceiver port -- max in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.2.1.7
Differential group delay measured at Rx Transceiver port -- average in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinPolarState 1.3.6.1.4.1.2636.3.71.1.2.2.1.8
Polarization state -- min in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxPolarState 1.3.6.1.4.1.2636.3.71.1.2.2.1.9
Polarization state -- max in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgPolarState 1.3.6.1.4.1.2636.3.71.1.2.2.1.10
Polarization state -- average in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.2.1.11
Polarization Dependent Loss -- min in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.2.1.12
Polarization Dependent Loss -- max in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.2.1.13
Polarization Dependent Loss -- average in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinQ 1.3.6.1.4.1.2636.3.71.1.2.2.1.14
Q -- min in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxQ 1.3.6.1.4.1.2636.3.71.1.2.2.1.15
Q -- max in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgQ 1.3.6.1.4.1.2636.3.71.1.2.2.1.16
Q -- Avg in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinSNR 1.3.6.1.4.1.2636.3.71.1.2.2.1.17
SNR -- min in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxSNR 1.3.6.1.4.1.2636.3.71.1.2.2.1.18
SNR -- max in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgSNR 1.3.6.1.4.1.2636.3.71.1.2.2.1.19
SNR -- avg in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.20
TxOutputPower -- min in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.21
TxOutputPower -- max in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.22
TxOutputPower -- average in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.23
RxInputPower -- min in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.24
RxInputPower -- max in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.25
RxInputPower -- average in the 15 minute interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntTimeStamp 1.3.6.1.4.1.2636.3.71.1.2.2.1.26
Time stamp PM interval
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

jnxPMIntSuspectedFlag 1.3.6.1.4.1.2636.3.71.1.2.2.1.27
If true, the data in this entry may be unreliable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

jnxPMIntSuspectReason 1.3.6.1.4.1.2636.3.71.1.2.2.1.28
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.29
Transmit Minimum LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.30
Transmit Maximum LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.31
Transmit Average LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinTemperature 1.3.6.1.4.1.2636.3.71.1.2.2.1.32
Minimum Temperature measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxTemperature 1.3.6.1.4.1.2636.3.71.1.2.2.1.33
Maximum Temperature measure at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgTemperature 1.3.6.1.4.1.2636.3.71.1.2.2.1.34
Average Temperature measure at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.2.1.35
Minimum Carrier frequency offset measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.2.1.36
Maximum Carrier frequency offset measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.2.1.37
Average Carrier frequency offset measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMinRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.38
Receive Minimum LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntMaxRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.39
Receive Maximum LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMIntAvgRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.40
Receive Average LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxOpticsPMDayTable 1.3.6.1.4.1.2636.3.71.1.2.3
A table of current PM Day entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxOpticsPMDayEntry

jnxOpticsPMDayEntry 1.3.6.1.4.1.2636.3.71.1.2.3.1
A conceptual row that contains information about the PM Day Table
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxOpticsPMDayEntry  

jnxOpticsPMDayIndex 1.3.6.1.4.1.2636.3.71.1.2.3.1.1
This is 1 - cur day/ 2 - prev day
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..2  

jnxPMDayMinChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.3.1.2
Residual Chromatic Dispersion measured at Rx Transceiver port - min in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.3.1.3
Residual Chromatic Dispersion measured at Rx Transceiver port - max in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.3.1.4
Residual Chromatic Dispersion measured at Rx Transceiver port - average in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.3.1.5
Differential Group Delay measured at Rx Transceiver port -- min in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.3.1.6
Differential Group Delay measured at Rx Transceiver port -- max in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.3.1.7
Differential Group Delay measured at Rx Transceiver port -- average in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinPolarState 1.3.6.1.4.1.2636.3.71.1.2.3.1.8
Polarization state -- min in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxPolarState 1.3.6.1.4.1.2636.3.71.1.2.3.1.9
Polarization state -- max in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgPolarState 1.3.6.1.4.1.2636.3.71.1.2.3.1.10
Polarization state -- average in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.3.1.11
Polarization Dependent Loss -- min in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.3.1.12
Polarization Dependent Loss -- max in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.3.1.13
Polarization Dependent Loss -- average in the day interval
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinQ 1.3.6.1.4.1.2636.3.71.1.2.3.1.14
Q -- min in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxQ 1.3.6.1.4.1.2636.3.71.1.2.3.1.15
Q -- max in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgQ 1.3.6.1.4.1.2636.3.71.1.2.3.1.16
Q -- Avg in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinSNR 1.3.6.1.4.1.2636.3.71.1.2.3.1.17
SNR -- min in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxSNR 1.3.6.1.4.1.2636.3.71.1.2.3.1.18
SNR -- max in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgSNR 1.3.6.1.4.1.2636.3.71.1.2.3.1.19
SNR -- avg in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.20
TxOutputPower -- min in the day
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.21
TxOutputPower -- max in the day.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.22
TxOutputPower -- average in the day.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.23
RxInputPower -- min in the day.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.24
RxInputPower -- max in the day.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.25
RxInputPower -- average in the day.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayTimeStamp 1.3.6.1.4.1.2636.3.71.1.2.3.1.26
Time for the Day.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

jnxPMDaySuspectedFlag 1.3.6.1.4.1.2636.3.71.1.2.3.1.27
If true, the data in this entry may be unreliable.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

jnxPMDaySuspectReason 1.3.6.1.4.1.2636.3.71.1.2.3.1.28
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - partial data 7 - one or more intervals are invaild
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.29
Transmit LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.30
Transmit Minimum LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.31
Transmit Maximum LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinTemperature 1.3.6.1.4.1.2636.3.71.1.2.3.1.32
Minimum Temperature measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxTemperature 1.3.6.1.4.1.2636.3.71.1.2.3.1.33
Maximum Temperature measure at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgTemperature 1.3.6.1.4.1.2636.3.71.1.2.3.1.34
Average Temperature measure at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.3.1.35
Minimum Carrier frequency offset measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.3.1.36
Maximum Carrier frequency offset measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.3.1.37
Average Carrier frequency offset measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMinRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.38
Receive LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayMaxRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.39
Receive Minimum LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxPMDayAvgRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.40
Receive Maximum LaserBiasCurrent measured at Transceiver port
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxOpticsNotificationTable 1.3.6.1.4.1.2636.3.71.1.3.1
A table of Notification entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxOpticsNotificationEntry

jnxOpticsNotificationEntry 1.3.6.1.4.1.2636.3.71.1.3.1.1
A conceptual entry in the Notification table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxOpticsNotificationEntry  

jnxOpticsNotificationLocation 1.3.6.1.4.1.2636.3.71.1.3.1.1.1
The object identifies indicates if this entry was for Near end/Far end.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  JnxOpticsLocation  

jnxOpticsNotificationDirection 1.3.6.1.4.1.2636.3.71.1.3.1.1.2
The object identifies indicates if this entry was for for the Tx/Rx or both.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  JnxOpticsDirection  

jnxOpticsLastNotificationId 1.3.6.1.4.1.2636.3.71.1.3.1.1.3
The object identifies the OTN alarm that most recently was set or cleared.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  JnxOpticsNotificationId  

jnxOpticsNotificationSeverity 1.3.6.1.4.1.2636.3.71.1.3.1.1.4
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  JnxOpticsSeverity  

jnxOpticsNotificationDate 1.3.6.1.4.1.2636.3.71.1.3.1.1.5
This specifies the date and time when this alarm occurred.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DateAndTime  

jnxOpticsClearAllPMs 1.3.6.1.4.1.2636.3.71.1.1.6
To clear all optics Performance monitoring counters on all interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxOpticsClearIfPMsTable 1.3.6.1.4.1.2636.3.71.1.1.7
To clear optics Performance monitoring counters on this interfaces
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxOpticsClearIfPMsEntry

jnxOpticsClearIfPMsEntry 1.3.6.1.4.1.2636.3.71.1.1.7.1
A conceptual row that s used to clear the Optics PM Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxOpticsClearIfPMsEntry  

jnxOpticsClearCurrent 1.3.6.1.4.1.2636.3.71.1.1.7.1.1
1- to clear all the Current Optics PM's for this interface
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxOpticsClearInterfaceInterval 1.3.6.1.4.1.2636.3.71.1.1.7.1.2
1- to clear all the Optics PM's intervals(1-96) for this interface
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxOpticsClearInterfaceDay 1.3.6.1.4.1.2636.3.71.1.1.7.1.3
1 - to clear all the Current Day and Previous Day Optics PM's for this interface
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxOpticsClearInterfaceAll 1.3.6.1.4.1.2636.3.71.1.1.7.1.4
1 - to clear all the Optics PM's for this interface
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

jnxOpticsNotificationPrefix 1.3.6.1.4.1.2636.4.22.0
OBJECT IDENTIFIER    

jnxOpticsNotificationSet 1.3.6.1.4.1.2636.4.22.0.1
Notification of a recently set optics alarm.
Status: current Access: read-write
NOTIFICATION-TYPE    

jnxOpticsNotificationCleared 1.3.6.1.4.1.2636.4.22.0.2
Notification of a recently cleared optics alarm.
Status: current Access: read-write
NOTIFICATION-TYPE