JUNIPER-MIB

File: JUNIPER-MIB.mib (76766 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC JUNIPER-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Gauge32 Counter32
DisplayString TimeStamp TimeInterval
TEXTUAL-CONVENTION DateAndTime jnxMibs
jnxChassisTraps jnxChassisOKTraps

Defined Types

JnxChassisId  
Identifies a specific router chassis.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), singleChassis(2), scc(3), lcc0(4), lcc1(5), lcc2(6), lcc3(7), jcs1(8), jcs2(9), jcs3(10), jcs4(11), node0(12), node1(13), sfc0(14), sfc1(15), sfc2(16), sfc3(17), sfc4(18), lcc4(19), lcc5(20), lcc6(21), lcc7(22), lcc8(23), lcc9(24), lcc10(25), lcc11(26), lcc12(27), lcc13(28), lcc14(29), lcc15(30), member0(31), member1(32), member2(33), member3(34), member4(35), member5(36), member6(37), member7(38), nodeDevice(39), interconnectDevice(40), controlPlaneDevice(41), directorDevice(42)  

JnxContainersEntry  
SEQUENCE    
  jnxContainersIndex Integer32
  jnxContainersView Integer32
  jnxContainersLevel Integer32
  jnxContainersWithin Integer32
  jnxContainersType OBJECT IDENTIFIER
  jnxContainersDescr DisplayString
  jnxContainersCount Integer32

JnxContentsEntry  
SEQUENCE    
  jnxContentsContainerIndex Integer32
  jnxContentsL1Index Integer32
  jnxContentsL2Index Integer32
  jnxContentsL3Index Integer32
  jnxContentsType OBJECT IDENTIFIER
  jnxContentsDescr DisplayString
  jnxContentsSerialNo DisplayString
  jnxContentsRevision DisplayString
  jnxContentsInstalled TimeStamp
  jnxContentsPartNo DisplayString
  jnxContentsChassisId JnxChassisId
  jnxContentsChassisDescr DisplayString
  jnxContentsChassisCleiCode DisplayString

JnxLEDEntry  
SEQUENCE    
  jnxLEDAssociateTable INTEGER
  jnxLEDAssociateIndex Integer32
  jnxLEDL1Index Integer32
  jnxLEDL2Index Integer32
  jnxLEDL3Index Integer32
  jnxLEDOriginator OBJECT IDENTIFIER
  jnxLEDDescr DisplayString
  jnxLEDState INTEGER
  jnxLEDStateOrdered INTEGER

JnxFilledEntry  
SEQUENCE    
  jnxFilledContainerIndex Integer32
  jnxFilledL1Index Integer32
  jnxFilledL2Index Integer32
  jnxFilledL3Index Integer32
  jnxFilledDescr DisplayString
  jnxFilledState INTEGER
  jnxFilledChassisId JnxChassisId
  jnxFilledChassisDescr DisplayString

JnxOperatingEntry  
SEQUENCE    
  jnxOperatingContentsIndex Integer32
  jnxOperatingL1Index Integer32
  jnxOperatingL2Index Integer32
  jnxOperatingL3Index Integer32
  jnxOperatingDescr DisplayString
  jnxOperatingState INTEGER
  jnxOperatingTemp Gauge32
  jnxOperatingCPU Gauge32
  jnxOperatingISR Gauge32
  jnxOperatingDRAMSize Integer32
  jnxOperatingBuffer Gauge32
  jnxOperatingHeap Gauge32
  jnxOperatingUpTime TimeInterval
  jnxOperatingLastRestart TimeStamp
  jnxOperatingMemory Integer32
  jnxOperatingStateOrdered INTEGER
  jnxOperatingChassisId JnxChassisId
  jnxOperatingChassisDescr DisplayString
  jnxOperatingRestartTime DateAndTime
  jnxOperating1MinLoadAvg Gauge32
  jnxOperating5MinLoadAvg Gauge32
  jnxOperating15MinLoadAvg Gauge32

JnxRedundancyEntry  
SEQUENCE    
  jnxRedundancyContentsIndex Integer32
  jnxRedundancyL1Index Integer32
  jnxRedundancyL2Index Integer32
  jnxRedundancyL3Index Integer32
  jnxRedundancyDescr DisplayString
  jnxRedundancyConfig INTEGER
  jnxRedundancyState INTEGER
  jnxRedundancySwitchoverCount Counter32
  jnxRedundancySwitchoverTime TimeStamp
  jnxRedundancySwitchoverReason INTEGER
  jnxRedundancyKeepaliveHeartbeat Integer32
  jnxRedundancyKeepaliveTimeout Integer32
  jnxRedundancyKeepaliveElapsed Integer32
  jnxRedundancyKeepaliveLoss Counter32
  jnxRedundancyChassisId JnxChassisId
  jnxRedundancyChassisDescr DisplayString

JnxFruEntry  
SEQUENCE    
  jnxFruContentsIndex Integer32
  jnxFruL1Index Integer32
  jnxFruL2Index Integer32
  jnxFruL3Index Integer32
  jnxFruName DisplayString
  jnxFruType INTEGER
  jnxFruSlot Integer32
  jnxFruState INTEGER
  jnxFruTemp Gauge32
  jnxFruOfflineReason INTEGER
  jnxFruLastPowerOff TimeStamp
  jnxFruLastPowerOn TimeStamp
  jnxFruPowerUpTime TimeInterval
  jnxFruChassisId JnxChassisId
  jnxFruChassisDescr DisplayString
  jnxFruPsdAssignment Integer32

Defined Values

jnxBoxAnatomy 1.3.6.1.4.1.2636.3.1
The MIB modules representing Juniper Networks' implementation of enterprise specific MIBs supported by a single SNMP agent.
MODULE-IDENTITY    

jnxBoxClass 1.3.6.1.4.1.2636.3.1.1
The class of the box, indicating which product line the box is about, for example, 'Internet Router'.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

jnxBoxDescr 1.3.6.1.4.1.2636.3.1.2
The name, model, or detailed description of the box, indicating which product the box is about, for example 'M40'.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxBoxSerialNo 1.3.6.1.4.1.2636.3.1.3
The serial number of this subject, blank if unknown or unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxBoxRevision 1.3.6.1.4.1.2636.3.1.4
The revision of this subject, blank if unknown or unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxBoxInstalled 1.3.6.1.4.1.2636.3.1.5
The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

jnxContainersTable 1.3.6.1.4.1.2636.3.1.6
A list of containers entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxContainersEntry

jnxContainersEntry 1.3.6.1.4.1.2636.3.1.6.1
An entry of containers table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxContainersEntry  

jnxContainersIndex 1.3.6.1.4.1.2636.3.1.6.1.1
The index for this entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..7fffffff  

jnxContainersView 1.3.6.1.4.1.2636.3.1.6.1.2
The view(s) from which the specific container appears. This variable indicates that the specific container is embedded and accessible from the corresponding view(s). The value is a bit map represented as a sum. If multiple bits are set, the specified container(s) are located and accessible from that set of views. The various values representing the bit positions and its corresponding views are: 1 front 2 rear 4 top 8 bottom 16 leftHandSide 32 rightHandSide Note 1: LefHandSide and rightHandSide are referred to based on the view from the front. Note 2: If the specified containers are scattered around various views, the numbering is according to the following sequence: front -> rear -> top -> bottom -> leftHandSide -> rightHandSide For each view plane, the numbering sequence is first from left to right, and then from up to down. Note 3: Even though the value in chassis hardware (e.g. slot number) may be labelled from 0, 1, 2, and up, all the indices in MIB start with 1 (not 0) according to network management convention.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..63  

jnxContainersLevel 1.3.6.1.4.1.2636.3.1.6.1.3
The abstraction level of the box or chassis. It is enumerated from the outside to the inside, from the outer layer to the inner layer. For example, top level (i.e. level 0) refers to chassis frame, level 1 FPC slot within chassis frame, level 2 PIC space within FPC slot.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxContainersWithin 1.3.6.1.4.1.2636.3.1.6.1.4
The index of its next higher level container housing this entry. The associated jnxContainersIndex in the jnxContainersTable represents its next higher level container.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxContainersType 1.3.6.1.4.1.2636.3.1.6.1.5
The type of this container.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

jnxContainersDescr 1.3.6.1.4.1.2636.3.1.6.1.6
The name or detailed description of this subject.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxContainersCount 1.3.6.1.4.1.2636.3.1.6.1.7
The maximum number of containers of this level per container of the next higher level. e.g. if there are six level 2 containers in level 1 container, then jnxContainersCount for level 2 is six.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxContentsLastChange 1.3.6.1.4.1.2636.3.1.7
The value of sysUpTime when the box contents table last changed. Zero if unknown or already existing when the agent was up.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

jnxContentsTable 1.3.6.1.4.1.2636.3.1.8
A list of contents entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxContentsEntry

jnxContentsEntry 1.3.6.1.4.1.2636.3.1.8.1
An entry of contents table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxContentsEntry  

jnxContentsContainerIndex 1.3.6.1.4.1.2636.3.1.8.1.1
The associated jnxContainersIndex in the jnxContainersTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..7fffffff  

jnxContentsL1Index 1.3.6.1.4.1.2636.3.1.8.1.2
The level one index of the container housing this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxContentsL2Index 1.3.6.1.4.1.2636.3.1.8.1.3
The level two index of the container housing this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxContentsL3Index 1.3.6.1.4.1.2636.3.1.8.1.4
The level three index of the container housing this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxContentsType 1.3.6.1.4.1.2636.3.1.8.1.5
The type of this subject. zeroDotZero if unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

jnxContentsDescr 1.3.6.1.4.1.2636.3.1.8.1.6
The name or detailed description of this subject.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxContentsSerialNo 1.3.6.1.4.1.2636.3.1.8.1.7
The serial number of this subject, blank if unknown or unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxContentsRevision 1.3.6.1.4.1.2636.3.1.8.1.8
The revision of this subject, blank if unknown or unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxContentsInstalled 1.3.6.1.4.1.2636.3.1.8.1.9
The value of sysUpTime when the subject was last installed, up-and-running. Zero if unknown or already up-and-running when the agent was up.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

jnxContentsPartNo 1.3.6.1.4.1.2636.3.1.8.1.10
The part number of this subject, blank if unknown or unavailable.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxContentsChassisId 1.3.6.1.4.1.2636.3.1.8.1.11
Identifies the chassis on which the contents of this row exists.
Status: current Access: read-only
OBJECT-TYPE    
  JnxChassisId  

jnxContentsChassisDescr 1.3.6.1.4.1.2636.3.1.8.1.12
A textual description of the chassis on which the contents of this row exists.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxContentsChassisCleiCode 1.3.6.1.4.1.2636.3.1.8.1.13
The clei code of this subject, blank if unknown or unavailable. A CLEI code is an intelligent code that consists of 10 alphanumeric characters with 4 data elements. The first data element is considered the basic code with the first 2 characters indicating the technology or equipment type, and the third and fourth characters denoting the functional sub-category. The second data element represents the features, and its three characters denote functional capabilities or changes. The third data element has one character and denotes a reference to a manufacturer, system ID, specification, or drawing. The fourth data element consists of two characters and contains complementary data. These two characters provide a means of differentiating or providing uniqueness between the eight character CLEI codes by identifying the manufacturing vintage of the product. Names are assigned via procedures defined in [GR485]. The assigned maintenance agent for the CLEI code, Telcordia Technologies, is responsible for assigning certain equipment and other identifiers (e.g., location, manufacturer/supplier) for the telecommunications industry.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxLEDLastChange 1.3.6.1.4.1.2636.3.1.9
The value of sysUpTime when the box LED table last changed. Zero if unknown or already at that state when the agent was up.
Status: deprecated Access: read-only
OBJECT-TYPE    
  TimeStamp  

jnxLEDTable 1.3.6.1.4.1.2636.3.1.10
A list of status entries.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxLEDEntry

jnxLEDEntry 1.3.6.1.4.1.2636.3.1.10.1
An entry of status table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  JnxLEDEntry  

jnxLEDAssociateTable 1.3.6.1.4.1.2636.3.1.10.1.1
The associated table that this entry is related.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER other(1), jnxContainersTable(2), jnxContentsTable(3)  

jnxLEDAssociateIndex 1.3.6.1.4.1.2636.3.1.10.1.2
The index of the associated table that this entry is related.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32 1..7fffffff  

jnxLEDL1Index 1.3.6.1.4.1.2636.3.1.10.1.3
The level one index of the associated table that this entry is related. Zero if unavailable or inapplicable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxLEDL2Index 1.3.6.1.4.1.2636.3.1.10.1.4
The level two index of the associated table that this entry is related. Zero if unavailable or inapplicable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxLEDL3Index 1.3.6.1.4.1.2636.3.1.10.1.5
The level three index of the associated table that this entry is related. Zero if unavailable or inapplicable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxLEDOriginator 1.3.6.1.4.1.2636.3.1.10.1.6
The originator of the this entry.
Status: deprecated Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

jnxLEDDescr 1.3.6.1.4.1.2636.3.1.10.1.7
The name or detailed description of this subject.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxLEDState 1.3.6.1.4.1.2636.3.1.10.1.8
The state of the LED indicator.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER other(1), green(2), yellow(3), red(4), blue(5), amber(6)  

jnxLEDStateOrdered 1.3.6.1.4.1.2636.3.1.10.1.9
The state of the LED indicator. Identical to jnxLEDState, but with enums ordered from 'most operational' to 'least operational' states.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER blue(1), green(2), amber(3), yellow(4), red(5), other(6)  

jnxFilledLastChange 1.3.6.1.4.1.2636.3.1.11
The value of sysUpTime when the box filled status table last changed. Zero if unknown or already at that state when the agent was up.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

jnxFilledTable 1.3.6.1.4.1.2636.3.1.12
A list of filled status entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxFilledEntry

jnxFilledEntry 1.3.6.1.4.1.2636.3.1.12.1
An entry of filled status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxFilledEntry  

jnxFilledContainerIndex 1.3.6.1.4.1.2636.3.1.12.1.1
The associated jnxContainersIndex in the jnxContainersTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..7fffffff  

jnxFilledL1Index 1.3.6.1.4.1.2636.3.1.12.1.2
The level one index of the container housing this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxFilledL2Index 1.3.6.1.4.1.2636.3.1.12.1.3
The level two index of the container housing this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxFilledL3Index 1.3.6.1.4.1.2636.3.1.12.1.4
The level three index of the container housing this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxFilledDescr 1.3.6.1.4.1.2636.3.1.12.1.5
The name or detailed description of this subject.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxFilledState 1.3.6.1.4.1.2636.3.1.12.1.6
The filled state of this subject.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), empty(2), filled(3)  

jnxFilledChassisId 1.3.6.1.4.1.2636.3.1.12.1.7
Identifies the chassis on which the contents of this row exists.
Status: current Access: read-only
OBJECT-TYPE    
  JnxChassisId  

jnxFilledChassisDescr 1.3.6.1.4.1.2636.3.1.12.1.8
A textual description of the chassis on which the contents of this row exists.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxOperatingTable 1.3.6.1.4.1.2636.3.1.13
A list of operating status entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxOperatingEntry

jnxOperatingEntry 1.3.6.1.4.1.2636.3.1.13.1
An entry of operating status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxOperatingEntry  

jnxOperatingContentsIndex 1.3.6.1.4.1.2636.3.1.13.1.1
The associated jnxContentsContainerIndex in the jnxContentsTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..7fffffff  

jnxOperatingL1Index 1.3.6.1.4.1.2636.3.1.13.1.2
The level one index associated with this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxOperatingL2Index 1.3.6.1.4.1.2636.3.1.13.1.3
The level two index associated with this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxOperatingL3Index 1.3.6.1.4.1.2636.3.1.13.1.4
The level three index associated with this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxOperatingDescr 1.3.6.1.4.1.2636.3.1.13.1.5
The name or detailed description of this subject.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxOperatingState 1.3.6.1.4.1.2636.3.1.13.1.6
The operating state of this subject.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), running(2), ready(3), reset(4), runningAtFullSpeed(5), down(6), standby(7)  

jnxOperatingTemp 1.3.6.1.4.1.2636.3.1.13.1.7
The temperature in Celsius (degrees C) of this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

jnxOperatingCPU 1.3.6.1.4.1.2636.3.1.13.1.8
The CPU utilization in percentage of this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

jnxOperatingISR 1.3.6.1.4.1.2636.3.1.13.1.9
The CPU utilization in percentage of this subject spending in interrupt service routine (ISR). Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

jnxOperatingDRAMSize 1.3.6.1.4.1.2636.3.1.13.1.10
The DRAM size in bytes of this subject. Zero if unavailable or inapplicable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Integer32  

jnxOperatingBuffer 1.3.6.1.4.1.2636.3.1.13.1.11
The buffer pool utilization in percentage of this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

jnxOperatingHeap 1.3.6.1.4.1.2636.3.1.13.1.12
The heap utilization in percentage of this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

jnxOperatingUpTime 1.3.6.1.4.1.2636.3.1.13.1.13
The time interval in 10-millisecond period that this subject has been up and running. Zero if unavailable or inapplicable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  TimeInterval  

jnxOperatingLastRestart 1.3.6.1.4.1.2636.3.1.13.1.14
The value of sysUpTime when this subject last restarted. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

jnxOperatingMemory 1.3.6.1.4.1.2636.3.1.13.1.15
The installed memory size in Megabytes of this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxOperatingStateOrdered 1.3.6.1.4.1.2636.3.1.13.1.16
The operating state of this subject. Identical to jnxOperatingState, but with enums ordered from 'most operational' to 'least operational' states.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER running(1), standby(2), ready(3), runningAtFullSpeed(4), reset(5), down(6), unknown(7)  

jnxOperatingChassisId 1.3.6.1.4.1.2636.3.1.13.1.17
Identifies the chassis on which the contents of this row exists.
Status: current Access: read-only
OBJECT-TYPE    
  JnxChassisId  

jnxOperatingChassisDescr 1.3.6.1.4.1.2636.3.1.13.1.18
A textual description of the chassis on which the contents of this row exists.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxOperatingRestartTime 1.3.6.1.4.1.2636.3.1.13.1.19
The time at which this entity last restarted.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

jnxOperating1MinLoadAvg 1.3.6.1.4.1.2636.3.1.13.1.20
The CPU Load Average over the last 1 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

jnxOperating5MinLoadAvg 1.3.6.1.4.1.2636.3.1.13.1.21
The CPU Load Average over the last 5 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

jnxOperating15MinLoadAvg 1.3.6.1.4.1.2636.3.1.13.1.22
The CPU Load Average over the last 15 minutes Here it will be shown as percentage value Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

jnxRedundancyTable 1.3.6.1.4.1.2636.3.1.14
A list of redundancy information entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxRedundancyEntry

jnxRedundancyEntry 1.3.6.1.4.1.2636.3.1.14.1
An entry in the redundancy information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxRedundancyEntry  

jnxRedundancyContentsIndex 1.3.6.1.4.1.2636.3.1.14.1.1
The associated jnxContentsContainerIndex in the jnxContentsTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..7fffffff  

jnxRedundancyL1Index 1.3.6.1.4.1.2636.3.1.14.1.2
The level one index associated with this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxRedundancyL2Index 1.3.6.1.4.1.2636.3.1.14.1.3
The level two index associated with this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxRedundancyL3Index 1.3.6.1.4.1.2636.3.1.14.1.4
The level three index associated with this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxRedundancyDescr 1.3.6.1.4.1.2636.3.1.14.1.5
The name or detailed description of this subject.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxRedundancyConfig 1.3.6.1.4.1.2636.3.1.14.1.6
The election priority of redundancy configuration for this subject. The value 'notApplicable' means no specific instance is configured to be master or backup; whichever component boots up first becomes a master.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), master(2), backup(3), disabled(4), notApplicable(5)  

jnxRedundancyState 1.3.6.1.4.1.2636.3.1.14.1.7
The current running state for this subject.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), master(2), backup(3), disabled(4)  

jnxRedundancySwitchoverCount 1.3.6.1.4.1.2636.3.1.14.1.8
The total number of switchover as perceived by this subject since routing engine is up and running. The switchover is defined as a change in state of jnxRedundancyState from master to backup or vice versa. Its value is reset when the routing engine is reset or rebooted.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

jnxRedundancySwitchoverTime 1.3.6.1.4.1.2636.3.1.14.1.9
The value of sysUpTime when the jnxRedundancyState of this subject was last switched over from master to backup or vice versa. Zero if unknown or never switched over since the routing engine is up and running.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

jnxRedundancySwitchoverReason 1.3.6.1.4.1.2636.3.1.14.1.10
The reason of the last switchover for this subject.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), neverSwitched(2), userSwitched(3), autoSwitched(4)  

jnxRedundancyKeepaliveHeartbeat 1.3.6.1.4.1.2636.3.1.14.1.11
The period of sending keepalive messages between the master and backup subsystems. It is a system-wide preset value in seconds used by internal mastership resolution. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxRedundancyKeepaliveTimeout 1.3.6.1.4.1.2636.3.1.14.1.12
The timeout period in seconds, by the keepalive watchdog timer, before initiating a switch over to the backup subsystem. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxRedundancyKeepaliveElapsed 1.3.6.1.4.1.2636.3.1.14.1.13
The elapsed time in seconds by this subject since receiving the last keepalive message from the other subsystems. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxRedundancyKeepaliveLoss 1.3.6.1.4.1.2636.3.1.14.1.14
The total number of losses on keepalive messages between the master and backup subsystems as perceived by this subject since the system is up and running. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

jnxRedundancyChassisId 1.3.6.1.4.1.2636.3.1.14.1.15
Identifies the chassis on which the contents of this row exists.
Status: current Access: read-only
OBJECT-TYPE    
  JnxChassisId  

jnxRedundancyChassisDescr 1.3.6.1.4.1.2636.3.1.14.1.16
A textual description of the chassis on which the contents of this row exists.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxFruTable 1.3.6.1.4.1.2636.3.1.15
A list of FRU status entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JnxFruEntry

jnxFruEntry 1.3.6.1.4.1.2636.3.1.15.1
An entry in the FRU status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  JnxFruEntry  

jnxFruContentsIndex 1.3.6.1.4.1.2636.3.1.15.1.1
The associated jnxContentsContainerIndex in the jnxContentsTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..7fffffff  

jnxFruL1Index 1.3.6.1.4.1.2636.3.1.15.1.2
The level one index associated with this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxFruL2Index 1.3.6.1.4.1.2636.3.1.15.1.3
The level two index associated with this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxFruL3Index 1.3.6.1.4.1.2636.3.1.15.1.4
The level three index associated with this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxFruName 1.3.6.1.4.1.2636.3.1.15.1.5
The name or detailed description of this subject.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxFruType 1.3.6.1.4.1.2636.3.1.15.1.6
The FRU type for this subject.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), clockGenerator(2), flexiblePicConcentrator(3), switchingAndForwardingModule(4), controlBoard(5), routingEngine(6), powerEntryModule(7), frontPanelModule(8), switchInterfaceBoard(9), processorMezzanineBoardForSIB(10), portInterfaceCard(11), craftInterfacePanel(12), fan(13), lineCardChassis(14), forwardingEngineBoard(15), protectedSystemDomain(16), powerDistributionUnit(17), powerSupplyModule(18), switchFabricBoard(19), adapterCard(20)  

jnxFruSlot 1.3.6.1.4.1.2636.3.1.15.1.7
The slot number of this subject. This is equivalent to jnxFruL1Index in meaning. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7fffffff  

jnxFruState 1.3.6.1.4.1.2636.3.1.15.1.8
The current state for this subject.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), empty(2), present(3), ready(4), announceOnline(5), online(6), anounceOffline(7), offline(8), diagnostic(9), standby(10)  

jnxFruTemp 1.3.6.1.4.1.2636.3.1.15.1.9
The temperature in Celsius (degrees C) of this subject. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

jnxFruOfflineReason 1.3.6.1.4.1.2636.3.1.15.1.10
The offline reason of this subject.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), none(2), error(3), noPower(4), configPowerOff(5), configHoldInReset(6), cliCommand(7), buttonPress(8), cliRestart(9), overtempShutdown(10), masterClockDown(11), singleSfmModeChange(12), packetSchedulingModeChange(13), physicalRemoval(14), unresponsiveRestart(15), sonetClockAbsent(16), rddPowerOff(17), majorErrors(18), minorErrors(19), lccHardRestart(20), lccVersionMismatch(21), powerCycle(22), reconnect(23), overvoltage(24), pfeVersionMismatch(25), febRddCfgChange(26), fpcMisconfig(27), fruReconnectFail(28), fruFwddReset(29), fruFebSwitch(30), fruFebOffline(31), fruInServSoftUpgradeError(32), fruChasdPowerRatingExceed(33), fruConfigOffline(34), fruServiceRestartRequest(35), spuResetRequest(36), spuFlowdDown(37), spuSpi4Down(38), spuWatchdogTimeout(39), spuCoreDump(40), fpgaSpi4LinkDown(41), i3Spi4LinkDown(42), cppDisconnect(43), cpuNotBoot(44), spuCoreDumpComplete(45), rstOnSpcSpuFailure(46), softRstOnSpcSpuFailure(47), hwAuthenticationFailure(48), reconnectFpcFail(49), fpcAppFailed(50), fpcKernelCrash(51), spuFlowdDownNoCore(52), spuFlowdCoreDumpIncomplete(53), spuFlowdCoreDumpComplete(54), spuIdpdDownNoCore(55), spuIdpdCoreDumpIncomplete(56), spuIdpdCoreDumpComplete(57), spuCoreDumpIncomplete(58), spuIdpdDown(59), fruPfeReset(60), fruReconnectNotReady(61), fruSfLinkDown(62), fruFabricDown(63), fruAntiCounterfeitRetry(64), fruFPCChassisClusterDisable(65), spuFipsError(66), fruFPCFabricDownOffline(67), febCfgChange(68), routeLocalizationRoleChange(69), fruFpcUnsupported(70), psdVersionMismatch(71), fruResetThresholdExceeded(72), picBounce(73), badVoltage(74), fruFPCReducedFabricBW(75), fruAutoheal(76), builtinPicBounce(77), fruFabricDegraded(78), fruFPCFabricDegradedOffline(79), fruUnsupportedSlot(80), fruRouteLocalizationMisCfg(81), fruTypeConfigMismatch(82), lccModeChanged(83), hwFault(84), fruPICOfflineOnEccErrors(85), fruFpcIncompatible(86), fruFpcFanTrayPEMIncompatible(87), fruUnsupportedFirmware(88), openflowConfigChange(89), fruFpcScbIncompatible(90), fruReUnresponsive(91), hwError(92), fruErrorManagerReqFPCReset(93), fruIncompatibleWithPEM(94), fruIncompatibleWithSIB(95), sibIncompatibleWithOtherSIB(96), fruPfeErrors(97)  

jnxFruLastPowerOff 1.3.6.1.4.1.2636.3.1.15.1.11
The value of sysUpTime when this subject was last powered off. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

jnxFruLastPowerOn 1.3.6.1.4.1.2636.3.1.15.1.12
The value of sysUpTime when this subject was last powered on. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

jnxFruPowerUpTime 1.3.6.1.4.1.2636.3.1.15.1.13
The time interval in 10-millisecond period that this subject has been up and running since the last power on time. Zero if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

jnxFruChassisId 1.3.6.1.4.1.2636.3.1.15.1.14
Identifies the chassis on which the contents of this row exists.
Status: current Access: read-only
OBJECT-TYPE    
  JnxChassisId  

jnxFruChassisDescr 1.3.6.1.4.1.2636.3.1.15.1.15
A textual description of the chassis on which the contents of this row exists.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

jnxFruPsdAssignment 1.3.6.1.4.1.2636.3.1.15.1.16
The PSD assignment of this subject. Zero if unavailable or not applicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..31  

jnxBoxKernelMemoryUsedPercent 1.3.6.1.4.1.2636.3.1.16
The percentage of kernel memory used of this subject. 0 if unavailable or inapplicable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

jnxBoxSystemDomainType 1.3.6.1.4.1.2636.3.1.17
The system domain type of this subject, notApplicable will be returned if this feature is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notApplicable(1), rootSystemDomain(2), protectedSystemDomain(3)  

jnxBoxPersonality 1.3.6.1.4.1.2636.3.1.18
The personality of the box, indicating which product line it is currently acting as for example, 'MX40'.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

jnxPowerSupplyFailure 1.3.6.1.4.1.2636.4.1.1
A jnxPowerSupplyFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has been in the failure (bad DC output) condition.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFanFailure 1.3.6.1.4.1.2636.4.1.2
A jnxFanFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has been in the failure (not spinning) condition.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxOverTemperature 1.3.6.1.4.1.2636.4.1.3
A jnxOverTemperature trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced over temperature condition.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxRedundancySwitchover 1.3.6.1.4.1.2636.4.1.4
A jnxRedundancySwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has experienced a redundancy switchover event defined as a change in state of jnxRedundancyState from master to backup or vice versa.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFruRemoval 1.3.6.1.4.1.2636.4.1.5
A jnxFruRemoval trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been removed from the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFruInsertion 1.3.6.1.4.1.2636.4.1.6
A jnxFruInsertion trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been inserted into the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFruPowerOff 1.3.6.1.4.1.2636.4.1.7
A jnxFruPowerOff trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered off in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFruPowerOn 1.3.6.1.4.1.2636.4.1.8
A jnxFruPowerOn trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has been powered on in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFruFailed 1.3.6.1.4.1.2636.4.1.9
This indicates the specified FRU (Field Replaceable Unit) has failed in the chassis. Most probably this is due toi some hard error such as fru is not powering up or not able to load ukernel. In these cases, fru is replaced.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFruOffline 1.3.6.1.4.1.2636.4.1.10
A jnxFruOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone offline in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFruOnline 1.3.6.1.4.1.2636.4.1.11
A jnxFruOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has gone online in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFruCheck 1.3.6.1.4.1.2636.4.1.12
A jnxFruCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has encountered some operational errors and gone into check state in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFEBSwitchover 1.3.6.1.4.1.2636.4.1.13
A jnxFEBSwitchover trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FEB (Forwarding Engine Board) has switched over.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxHardDiskFailed 1.3.6.1.4.1.2636.4.1.14
A jnxHardDiskFailed trap signifies that the SNMP entity, acting in an agent role, has detected that the Disk in the specified Routing Engine has encountered some operational errors and gone into failed state in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxHardDiskMissing 1.3.6.1.4.1.2636.4.1.15
A DiskMissing trap signifies that the SNMP entity, acting in an agent role, has detected that hard disk in the specified outing Engine is missing from boot device list.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxBootFromBackup 1.3.6.1.4.1.2636.4.1.16
A jnxBootFromBackup trap signifies that the SNMP entity, acting in an agent role, has detected that the specified routing-engine/member has booted from the back up root partition
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFmLinkErr 1.3.6.1.4.1.2636.4.1.17
A LinkErr trap signifies that the SNMP entity, acting in an agent role, has detected link errors.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFmCellDropErr 1.3.6.1.4.1.2636.4.1.18
A CellDropErr trap signifies that the SNMP entity, acting in an agent role, has detected cell drop errors.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxExtSrcLockLost 1.3.6.1.4.1.2636.4.1.19
A ExtSrcLockLost trap signifies that the SNMP entity, acting in an agent role, has detected that a lock for an external clock source has been lost.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxPlaneOffline 1.3.6.1.4.1.2636.4.1.20
A jnxPlaneOffline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric plane has gone offline in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxPlaneOnline 1.3.6.1.4.1.2636.4.1.21
A jnxPlaneOnline trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric Plane has gone online in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxPlaneCheck 1.3.6.1.4.1.2636.4.1.22
A jnxPlaneCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric plane has encountered some operational errors and gone into check state in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxPlaneFault 1.3.6.1.4.1.2636.4.1.23
A jnxPlaneCheck trap signifies that the SNMP entity, acting in an agent role, has detected that the specified Fabric plane has encountered some operational errors and gone into fault state in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxPowerSupplyInputFailure 1.3.6.1.4.1.2636.4.1.24
A jnxPowerSupplyInputFailure trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply's input feed in the chassis has been in the failure condition.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxPowerSupplyOK 1.3.6.1.4.1.2636.4.2.1
A jnxPowerSupplyOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply in the chassis has recovered from the failure (bad DC output) condition.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFanOK 1.3.6.1.4.1.2636.4.2.2
A jnxFanOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified cooling fan or impeller in the chassis has recovered from the failure (not spinning) condition.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxTemperatureOK 1.3.6.1.4.1.2636.4.2.3
A jnxTemperatureOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified hardware component in the chassis has recovered from over temperature condition.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxFruOK 1.3.6.1.4.1.2636.4.2.4
A jnxFruOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified FRU (Field Replaceable Unit) has recovered from previous operational errors and it is in ok state in the chassis.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxExtSrcLockAcquired 1.3.6.1.4.1.2636.4.2.5
A ExtSrcLockAcquired trap signifies that the SNMP entity, acting in an agent role, has detected that a lock for an external clock source has been acquired.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxHardDiskOK 1.3.6.1.4.1.2636.4.2.6
A jnxHardDiskOK trap signifies that the SNMP entity, acting in an agent role, has detected that the Disk in the specified Routing Engine has recovered from the failure condition.
Status: current Access: read-only
NOTIFICATION-TYPE    

jnxPowerSupplyInputOK 1.3.6.1.4.1.2636.4.2.7
A jnxPowerSupplyInputOK trap signifies that the SNMP entity, acting in an agent role, has detected that the specified power supply's input feed in the chassis has recovered from the failure condition.
Status: current Access: read-only
NOTIFICATION-TYPE