Juniper-BGP-CONF

File: Juniper-BGP-CONF.mib (23112 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF Juniper-Agents

Imported symbols

MODULE-IDENTITY AGENT-CAPABILITIES juniAgents

Defined Values

juniBgpAgent 1.3.6.1.4.1.4874.5.2.4
The agent capabilities definitions for the BGP component of the SNMP agent in the Juniper E-series family of products.
MODULE-IDENTITY    

juniBgpAgentV1 1.3.6.1.4.1.4874.5.2.4.1
The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when a new object was added to the general configuration group.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV2 1.3.6.1.4.1.4874.5.2.4.2
The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when the BGP route congiguration group was replaced with new tables containing the original route destination as an additional index.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV3 1.3.6.1.4.1.4874.5.2.4.3
The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when the peer and peer-group local-as support was added.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV4 1.3.6.1.4.1.4874.5.2.4.4
The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added for adding unicast BGP routes into a multicast view.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV5 1.3.6.1.4.1.4874.5.2.4.5
The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added for the standard BGP4-MIB and for BGP internal redistribute.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV6 1.3.6.1.4.1.4874.5.2.4.6
The MIBs supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for four-octet AS-numbers, dynamic capability negotiation, iBGP multipath and confederation peers filter-list.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV7 1.3.6.1.4.1.4874.5.2.4.7
The MIBs supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for neighbor site-of-origin and peer leniency.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV8 1.3.6.1.4.1.4874.5.2.4.8
The MIBs supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for several new features.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV9 1.3.6.1.4.1.4874.5.2.4.9
The MIBs supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for send-label, carrier's carrier feature for BGP/MPLS VPN and reconvergence after loss of MPLS next-hop.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV10 1.3.6.1.4.1.4874.5.2.4.10
The MIBs supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for route-map option in default-information originate and neighbor ... default-originate, and when support was added for the new dynamic capability negotiation draft.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV11 1.3.6.1.4.1.4874.5.2.4.11
The MIB supported by the SNMP agent for the BGP application in JUNOSe. These capabilities became obsolete when support was added to the Juniper-BGP-MIB for BGP conditional advertisement.
Status: obsolete Access: read-only
AGENT-CAPABILITIES    

juniBgpAgentV12 1.3.6.1.4.1.4874.5.2.4.12
The MIB supported by the SNMP agent for the BGP application in JUNOSe.
Status: current Access: read-only
AGENT-CAPABILITIES