Juniper-RADIUS-CLIENT-MIB

File: Juniper-RADIUS-CLIENT-MIB.mib (347718 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI SNMPv2-CONF
Juniper-MIBs

Imported symbols

TEXTUAL-CONVENTION MODULE-IDENTITY OBJECT-TYPE
Counter32 Integer32 Gauge32
IpAddress TimeTicks NOTIFICATION-TYPE
DisplayString RowStatus TruthValue
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
juniMibs

Defined Types

JuniRadiusClientRemoterCircuitIdFormatComponents  
The set of configurable choices of PPPoE Remote Circtuit Id. The maximum enumerated type will never be greater than 255, 'agentCircuitId' denotes the suboption 1 and 'remoteCircuitId' denotes the suboption 2 of option 82 (RFC3046).
TEXTUAL-CONVENTION    
  INTEGER agentCircuitId(1), agentRemoteId(2), nasIdentifier(3), dsl-format-1(4)  

JuniRadiusAuthClientServerEntry  
SEQUENCE    
  juniRadiusAuthClientServerAddress IpAddress
  juniRadiusAuthClientServerPortNumber Integer32
  juniRadiusAuthClientRoundTripTime TimeTicks
  juniRadiusAuthClientAccessRequests Counter32
  juniRadiusAuthClientAccessRetransmissions Counter32
  juniRadiusAuthClientAccessAccepts Counter32
  juniRadiusAuthClientAccessRejects Counter32
  juniRadiusAuthClientAccessChallenges Counter32
  juniRadiusAuthClientMalformedAccessResponses Counter32
  juniRadiusAuthClientBadAuthenticators Counter32
  juniRadiusAuthClientPendingRequests Gauge32
  juniRadiusAuthClientTimeouts Counter32
  juniRadiusAuthClientUnknownTypes Counter32
  juniRadiusAuthClientPacketsDropped Counter32

JuniRadiusAuthClientCfgServerEntry  
SEQUENCE    
  juniRadiusAuthClientCfgServerAddress IpAddress
  juniRadiusAuthClientCfgServerPortNumber Integer32
  juniRadiusAuthClientCfgKey DisplayString
  juniRadiusAuthClientCfgTimeoutInterval Integer32
  juniRadiusAuthClientCfgRetries Integer32
  juniRadiusAuthClientCfgMaxPendingRequests Integer32
  juniRadiusAuthClientCfgRowStatus RowStatus
  juniRadiusAuthClientCfgPrecedence Integer32
  juniRadiusAuthClientCfgDeadTime Integer32

JuniRadiusAcctClientServerEntry  
SEQUENCE    
  juniRadiusAcctClientServerAddress IpAddress
  juniRadiusAcctClientServerPortNumber Integer32
  juniRadiusAcctClientRoundTripTime TimeTicks
  juniRadiusAcctClientRequests Counter32
  juniRadiusAcctClientStartRequests Counter32
  juniRadiusAcctClientInterimRequests Counter32
  juniRadiusAcctClientStopRequests Counter32
  juniRadiusAcctClientRejectRequests Counter32
  juniRadiusAcctClientRetransmissions Counter32
  juniRadiusAcctClientResponses Counter32
  juniRadiusAcctClientStartResponses Counter32
  juniRadiusAcctClientInterimResponses Counter32
  juniRadiusAcctClientStopResponses Counter32
  juniRadiusAcctClientRejectResponses Counter32
  juniRadiusAcctClientMalformedResponses Counter32
  juniRadiusAcctClientBadAuthenticators Counter32
  juniRadiusAcctClientPendingRequests Gauge32
  juniRadiusAcctClientTimeouts Counter32
  juniRadiusAcctClientUnknownTypes Counter32
  juniRadiusAcctClientPacketsDropped Counter32

JuniRadiusAcctClientCfgServerEntry  
SEQUENCE    
  juniRadiusAcctClientCfgServerAddress IpAddress
  juniRadiusAcctClientCfgServerPortNumber Integer32
  juniRadiusAcctClientCfgKey DisplayString
  juniRadiusAcctClientCfgTimeoutInterval Integer32
  juniRadiusAcctClientCfgRetries Integer32
  juniRadiusAcctClientCfgMaxPendingRequests Integer32
  juniRadiusAcctClientCfgRowStatus RowStatus
  juniRadiusAcctClientCfgPrecedence Integer32
  juniRadiusAcctClientCfgDeadTime Integer32

Defined Values

juniRadiusClientMIB 1.3.6.1.4.1.4874.2.2.19
The Remote Authentication Dial In User Service (RADIUS) Client MIB for the Juniper enterprise.
MODULE-IDENTITY    

juniRadiusClientObjects 1.3.6.1.4.1.4874.2.2.19.1
OBJECT IDENTIFIER    

juniRadiusGeneralClient 1.3.6.1.4.1.4874.2.2.19.1.1
OBJECT IDENTIFIER    

juniRadiusAuthClient 1.3.6.1.4.1.4874.2.2.19.1.2
OBJECT IDENTIFIER    

juniRadiusAcctClient 1.3.6.1.4.1.4874.2.2.19.1.3
OBJECT IDENTIFIER    

juniRadiusClientIdentifier 1.3.6.1.4.1.4874.2.2.19.1.1.1
The NAS-Identifier of the RADIUS client.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

juniRadiusClientAlgorithm 1.3.6.1.4.1.4874.2.2.19.1.1.2
The algorithm used by the client when multiple authentication/accounting servers are configured: direct Use servers in order of precedence, each time beginning with the highest precedence server and proceeding to lower precedence servers if the the RADIUS request fails, until the request succeeds or all servers have been tried. roundRobin Use servers in round-robin order, each time beginning with the next round-robin-ordered server and proceeding cyclically through servers if the RADIUS request fails, until the request succeeds or all servers have been tried.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER direct(0), roundRobin(1)  

juniRadiusClientSourceAddress 1.3.6.1.4.1.4874.2.2.19.1.1.3
The source address used by the RADIUS client in requests to the RADIUS server. The RADIUS server returns responses from this address. Setting this object to 0.0.0.0 will reset the value to its default.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

juniRadiusClientUdpChecksum 1.3.6.1.4.1.4874.2.2.19.1.1.4
Enables/disables the checksum calculations on RADIUS UDP packets.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientNasIdentifier 1.3.6.1.4.1.4874.2.2.19.1.1.5
The identifier used by the client for the value of NAS-Identifier attribute (number 32) in access and accounting requests. The default is to use the system name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

juniRadiusClientDslPortType 1.3.6.1.4.1.4874.2.2.19.1.1.6
The value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for DSL interfaces in the RADIUS access and accounting messages: virtual Used for Virtual interfaces. sdsl Used for Symmetric DSL. adsl-cap Used for Asymmetric DSL, Carrierless Amplitude Phase Modulation. adsl-dmt Used for Asymmetric DSL, Discrete Multi-Tone. idsl Used for ISDN Digital Subscriber Line. xdsl Used for Digital Subscriber Line of unknown type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER virtual(5), sdsl(11), adsl-cap(12), adsl-dmt(13), idsl(14), xdsl(16)  

juniRadiusClientTunnelAccounting 1.3.6.1.4.1.4874.2.2.19.1.1.7
Enables/disables the tunnel accounting feature, which causes the system to send tunnel and session accounting requests.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientAcctSessionIdFormat 1.3.6.1.4.1.4874.2.2.19.1.1.8
The format used by the client for the Acct-Session-ID attribute (attribute number 44): decimal Use an ASCII decimal value only in the Acct-Session-ID attribute. description Use an ASCII description value which includes the interface type (i.e. ATM), slot, port, and circuit number (VPI and VCI for ATM), and a hexidecimal value in the Acct-Session-ID attribute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER decimal(0), description(1)  

juniRadiusClientNasPortFormat 1.3.6.1.4.1.4874.2.2.19.1.1.9
The format used by the client for the NAS-Port attribute (attribute number 5): xssssppp In the NAS-Port attribute (attribute 5) use format of 0 bit, followed by 4 bits for the slot number, 3 bits for the port number, and finally, the circuit number in the remaining bits. ssssxppp In the NAS-Port attribute (attribute 5) use format of 4 bits for the slot number, followed by a 0 bit, 3 bits for the port number and finally, the circuit number in the remaining bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER xssssppp(0), ssssxppp(1)  

juniRadiusClientCallingStationDelimiter 1.3.6.1.4.1.4874.2.2.19.1.1.10
The character use as for delimiting fields in the Calling-Station-ID attribute (attribute 31, from RFC 2865) sent by the client. The default value is '#'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1)  

juniRadiusClientEthernetPortType 1.3.6.1.4.1.4874.2.2.19.1.1.11
The value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for Ethernet interfaces in the RADIUS access and accounting messages: ethernet Used for Ethernet interfaces. virtual Used for Virtual interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER virtual(5), ethernet(15)  

juniRadiusClientIncludeIpAddrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.12
Enables/disables the inclusion of the Framed-IP-Address attribute in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctSessionIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.13
Enables/disables the inclusion of the Acct-Session-ID attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientRollover 1.3.6.1.4.1.4874.2.2.19.1.1.14
Enables/disables the rollover to next server on receipt of access-reject.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientCallingStationIdFormat 1.3.6.1.4.1.4874.2.2.19.1.1.15
The format used by the client for the Calling-Station-ID attribute (attribute number 31): delimited In the Calling-Station-ID attribute (attribute 31) use the format ' '. fixedFomat In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of port, 3 digits of VPI, followed by 5 digits of VCI. fixedFormatAdapterEmbedded In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 1 digit of slot, 1 digit of adapter, 1 digit of port, 3 digits of VPI, followed by 5 digits of VCI. fixedFormatAdapterNewField In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of adapter, 2 digits of port, 3 digits of VPI, followed by 5 digits of VCI. fixedFormatStacked In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of port, 4 digits of SVLAN ID and 4 digits of VLAN ID only in the case of Ethernet fixedFormatAdapterEmbeddedStacked In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 1 digit of slot, 1 digit of adapter, 1 digit of port, 4 digits of SVLAN ID and 4 digits of VLAN ID only in the case of Ethernet fixedFormatAdapterNewFieldStacked In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of adapter, 2 digits of port, 4 digits of SVLAN ID and 4 digits of VLAN ID only in the case of Ethernet
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER delimited(0), fixedFormat(1), fixedFormatAdapterEmbedded(2), fixedFormatAdapterNewField(3), fixedFormatStacked(4), fixedFormatAdapterEmbeddedStacked(5), fixedFormatAdapterNewFieldStacked(6)  

juniRadiusClientNasIpAddrUse 1.3.6.1.4.1.4874.2.2.19.1.1.16
The value used by the client for the NAS-IP-Addr attribute (attribute number 4): normal Use the ERX IP address value in the NAS-IP-Addr attribute (attribute 4). tunnelClientEndpoint Use the Tunnel Client's address value in the NAS-IP-Addr attribute (attribute 4) for tunnel users.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(0), tunnelClientEndpoint(1)  

juniRadiusClientIncludeAcctTunnelConnectionInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.17
Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeCalledStationIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.18
Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeCallingStationIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.19
Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeConnectInfoInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.20
Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasIdentifierInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.21
Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasPortInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.22
Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasPortIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.23
Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasPortTypeInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.24
Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludePppoeDescriptionInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.25
Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelClientAuthIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.26
Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelClientEndpointInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.27
Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelMediumTypeInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.28
Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelServerAttributesInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.29
Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelServerAuthIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.30
Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelServerEndpointInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.31
Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelTypeInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.32
Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctTunnelConnectionInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.33
Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeCalledStationIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.34
Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeCallingStationIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.35
Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeClassInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.36
Enables/disables the inclusion of the Class attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeConnectInfoInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.37
Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeEgressPolicyNameInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.38
Enables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeEventTimestampInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.39
Enables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeFramedCompressionInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.40
Enables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeFramedIpNetmaskInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.41
Enables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIngressPolicyNameInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.42
Enables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasIdentifierInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.43
Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasPortInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.44
Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasPortIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.45
Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasPortTypeInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.46
Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludePppoeDescriptionInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.47
Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelAssignmentIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.48
Enables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelClientAuthIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.49
Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelClientEndpointInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.50
Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelMediumTypeInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.51
Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelPreferenceInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.52
Enables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelServerAttributesInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.53
Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelServerAuthIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.54
Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelServerEndpointInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.55
Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelTypeInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.56
Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctTunnelConnectionInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.57
Enables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeCalledStationIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.59
Enables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeCallingStationIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.60
Enables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeClassInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.61
Enables/disables the inclusion of the Class attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeConnectInfoInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.62
Enables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeEgressPolicyNameInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.63
Enables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeEventTimestampInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.64
Enables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeFramedCompressionInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.65
Enables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeFramedIpNetmaskInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.66
Enables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIngressPolicyNameInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.67
Enables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeInputGigawordsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.68
Enables/disables the inclusion of the Input-Gigawords attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasIdentifierInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.69
Enables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasPortInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.70
Enables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasPortIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.71
Enables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasPortTypeInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.72
Enables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeOutputGigawordsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.73
Enables/disables the inclusion of the Output-Gigawords attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludePppoeDescriptionInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.74
Enables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelAssignmentIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.75
Enables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelClientAuthIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.76
Enables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelClientEndpointInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.77
Enables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelMediumTypeInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.78
Enables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelPreferenceInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.79
Enables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelServerAttributesInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.80
Enables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelServerAuthIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.81
Enables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelServerEndpointInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.82
Enables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelTypeInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.83
Enables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeInputGigapktsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.84
Enables/disables the inclusion of the Input-Gigapkts attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeOutputGigapktsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.85
Enables/disables the inclusion of the Output-Gigapkts attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIgnoreFramedIpNetmask 1.3.6.1.4.1.4874.2.2.19.1.1.86
Enables/disables ignoring the Framed-IP-Netmask attribute in the RADIUS Access-Accept packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIgnoreAtmCategory 1.3.6.1.4.1.4874.2.2.19.1.1.87
Enables/disables ignoring the ATM-Category (vsa) attribute in the RADIUS Access-Accept packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIgnoreAtmMbs 1.3.6.1.4.1.4874.2.2.19.1.1.88
Enables/disables ignoring the ATM-MBS (vsa) attribute in the RADIUS Access-Accept packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIgnoreAtmPcr 1.3.6.1.4.1.4874.2.2.19.1.1.89
Enables/disables ignoring the ATM-PCR (vsa) attribute in the RADIUS Access-Accept packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIgnoreAtmScr 1.3.6.1.4.1.4874.2.2.19.1.1.90
Enables/disables ignoring the ATM-SCR-Or-CBR (vsa) attribute in the RADIUS Access-Accept packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIgnoreEgressPolicyName 1.3.6.1.4.1.4874.2.2.19.1.1.91
Enables/disables ignoring the Egress-Policy-Name (vsa) attribute in the RADIUS Access-Accept packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIgnoreIngressPolicyName 1.3.6.1.4.1.4874.2.2.19.1.1.92
Enables/disables ignoring the Ingress-Policy-Name (vsa) attribute in the RADIUS Access-Accept packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIgnoreVirtualRouter 1.3.6.1.4.1.4874.2.2.19.1.1.93
Enables/disables ignoring the Virtual-Router (vsa) attribute in the RADIUS Access-Accept packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientTrapOnAuthServerUnavailable 1.3.6.1.4.1.4874.2.2.19.1.1.94
Enables/disables sending an SNMP trap for the condition that a specific RADIUS authentication server times out.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientTrapOnAcctServerUnavailable 1.3.6.1.4.1.4874.2.2.19.1.1.95
Enables/disables sending an SNMP trap for the condition that a specific RADIUS accounting server times out.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientTrapOnNoAuthServerAvailable 1.3.6.1.4.1.4874.2.2.19.1.1.96
Enables/disables sending an SNMP trap for the condition that all of the configured RADIUS authentication servers (in a virtual router context) time out.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientTrapOnNoAcctServerAvailable 1.3.6.1.4.1.4874.2.2.19.1.1.97
Enables/disables sending an SNMP trap for the condition that all of the configured RADIUS accounting servers (in a virtual router context) time out.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientTrapOnAuthServerAvailable 1.3.6.1.4.1.4874.2.2.19.1.1.98
Enables/disables sending an SNMP trap for the condition that a specific RADIUS authentication server has sent a response after being declared unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientTrapOnAcctServerAvailable 1.3.6.1.4.1.4874.2.2.19.1.1.99
Enables/disables sending an SNMP trap for the condition that a specific RADIUS accounting server has sent a response after being declared unavailable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientPppoeNasPortFormat 1.3.6.1.4.1.4874.2.2.19.1.1.100
The format used by the client for the Nas-Port attribute (attribute number 5) for PPPoE interfaces: none Use the format specified in juniRadiusClientNasPortFormat unique Use a unique value that is not related to the interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), unique(1)  

juniRadiusClientIncludeTunnelInterfaceIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.101
Enables/disables the inclusion of the Tunnel-Interface-Id (VSA) attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelInterfaceIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.102
Enables/disables the inclusion of the Tunnel-Interface-Id (VSA) in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeTunnelInterfaceIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.103
Enables/disables the inclusion of the Tunnel-Interface-Id (VSA) in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2tpPppDisconnectCauseInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.104
Enables/disables the inclusion of the L2TP PPP Disconnect Cause (VSA) in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientVlanNasPortFormat 1.3.6.1.4.1.4874.2.2.19.1.1.105
The format used by the client for the Nas-Port attribute (attribute number 5) for VLAN interfaces: none Include the VLAN ID if configured stacked Include both the SVLAN ID and VLAN ID if configured
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), stacked(1)  

juniRadiusClientIncludeAcctMultiSessionIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.106
Enables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Access-Req packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctMultiSessionIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.107
Enables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctMultiSessionIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.108
Enables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAscendNumInMultilinkInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.109
Enables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Access-Req packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAscendNumInMultilinkInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.110
Enables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAscendNumInMultilinkInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.111
Enables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientConnectInfoFormat 1.3.6.1.4.1.4874.2.2.19.1.1.112
The format used by the client for the Connect-Info attribute (attribute number 77): default The Connect-Info Attribute is generated from the underlying interface id string. l2tpConnectSpeed The Connect-Info Attribute is generated from the received l2tp connect speed AVPs. The format is in bits per second: [/] The receive connect speed is included if non zero and different from the transmit connect speed. l2tpConnectSpeedRXWhenEqual The Connect-Info Attribute is generated from the received l2tp connect speed AVPs. The format is in bits per second: / The receive connect speed is included if non-zero.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), l2tpConnectSpeed(1), l2tpConnectSpeedRxWhenEqual(2)  

juniRadiusClientIncludeProfileServiceDescrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.113
Enables/disables the inclusion of the AAA profile service description attribute in the RADIUS Access-Req packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeProfileServiceDescrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.114
Enables/disables the inclusion of the AAA profile service description attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeProfileServiceDescrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.115
Enables/disables the inclusion of the AAA profile service description attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctAuthenticInAcctOn 1.3.6.1.4.1.4874.2.2.19.1.1.116
Enables/disables the inclusion of the acct-authentic attribute in the RADIUS Accounting-On packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctDelayTimeInAcctOn 1.3.6.1.4.1.4874.2.2.19.1.1.117
Enables/disables the inclusion of the acct-delay-time attribute in the RADIUS Accounting-On packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctSessionIdInAcctOn 1.3.6.1.4.1.4874.2.2.19.1.1.118
Enables/disables the inclusion of the acct-session-id attribute in the RADIUS Accounting-On packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasIdentifierInAcctOn 1.3.6.1.4.1.4874.2.2.19.1.1.119
Enables/disables the inclusion of the nas-identifier attribute in the RADIUS Accounting-On packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeEventTimestampInAcctOn 1.3.6.1.4.1.4874.2.2.19.1.1.120
Enables/disables the inclusion of the event-timestamp attribute in the RADIUS Accounting-On packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctAuthenticInAcctOff 1.3.6.1.4.1.4874.2.2.19.1.1.121
Enables/disables the inclusion of the acct-authentic attribute in the RADIUS Accounting-Off packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctDelayTimeInAcctOff 1.3.6.1.4.1.4874.2.2.19.1.1.122
Enables/disables the inclusion of the acct-delay-time attribute in the RADIUS Accounting-Off packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctSessionIdInAcctOff 1.3.6.1.4.1.4874.2.2.19.1.1.123
Enables/disables the inclusion of the acct-session-id attribute in the RADIUS Accounting-Off packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeAcctTerminateCauseInAcctOff 1.3.6.1.4.1.4874.2.2.19.1.1.124
Enables/disables the inclusion of the acct-terminate-cause attribute in the RADIUS Accounting-Off packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeNasIdentifierInAcctOff 1.3.6.1.4.1.4874.2.2.19.1.1.125
Enables/disables the inclusion of the nas-identifier attribute in the RADIUS Accounting-Off packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeEventTimestampInAcctOff 1.3.6.1.4.1.4874.2.2.19.1.1.126
Enables/disables the inclusion of the event-timestamp attribute in the RADIUS Accounting-Off packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDhcpOptionsInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.127
Enables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDhcpMacAddressInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.128
Enables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDhcpGiAddressInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.129
Enables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDhcpOptionsInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.130
Enables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDhcpMacAddressInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.131
Enables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDhcpGiAddressInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.132
Enables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDhcpOptionsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.133
Enables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDhcpMacAddressInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.134
Enables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDhcpGiAddressInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.135
Enables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientNasPortIdOverrideRemoteCircuitId 1.3.6.1.4.1.4874.2.2.19.1.1.136
Enables/disables overriding the Nas-Port-Id with the PPPoe Remote Circuit Id.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientCallingStationIdOverrideRemoteCircuitId 1.3.6.1.4.1.4874.2.2.19.1.1.137
Enables/disables overriding the Calling-Station-Id with the PPPoe Remote Circuit Id.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeMlpppBundleNameInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.138
Enables/disables the inclusion of the MLPPP-Bundle-Name (VSA) attribute in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeMlpppBundleNameInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.139
Enables/disables the inclusion of the MLPPP-Bundle-Name (VSA) in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeMlpppBundleNameInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.140
Enables/disables the inclusion of the MLPPP-Bundle-Name (VSA) in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientOverrideNasInfo 1.3.6.1.4.1.4874.2.2.19.1.1.141
Enables/disables the overriding nas-ip-address and nas-identifier by values from authentication virual router. If juniRadiusClientNasIpAddrUse is not 'normal', then nas-ip-address is not overriden.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeInterfaceDescriptionInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.142
Enables/disables the inclusion of the interface description attribute in the RADIUS Access-Req packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeInterfaceDescriptionInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.143
Enables/disables the inclusion of the interface description attribute in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeInterfaceDescriptionInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.144
Enables/disables the inclusion of the interface description attribute in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientAtmNasPortFormat 1.3.6.1.4.1.4874.2.2.19.1.1.145
The format used by the client for the Nas-Port attribute (attribute number 5) for ATM interfaces: none Use the format specified in juniRadiusClientNasPortFormat extended Use the extended format determined by atm nas-port field width values.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), extended(1)  

juniRadiusClientNasPortFieldWidthAtmSlot 1.3.6.1.4.1.4874.2.2.19.1.1.146
Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the slot of the atm interface when the value of juniRadiusClientAtmNasPortFormat is extended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

juniRadiusClientNasPortFieldWidthAtmAdapter 1.3.6.1.4.1.4874.2.2.19.1.1.147
Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the adapter of the atm interface when the value of juniRadiusClientAtmNasPortFormat is extended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

juniRadiusClientNasPortFieldWidthAtmPort 1.3.6.1.4.1.4874.2.2.19.1.1.148
Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the port of the atm interface when the value of juniRadiusClientAtmNasPortFormat is extended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

juniRadiusClientNasPortFieldWidthAtmVpi 1.3.6.1.4.1.4874.2.2.19.1.1.149
Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vpi of the atm interface when the value of juniRadiusClientAtmNasPortFormat is extended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

juniRadiusClientNasPortFieldWidthAtmVci 1.3.6.1.4.1.4874.2.2.19.1.1.150
Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vci of the atm interface when the value of juniRadiusClientAtmNasPortFormat is extended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

juniRadiusClientEthernetNasPortFormat 1.3.6.1.4.1.4874.2.2.19.1.1.151
The format used by the client for the Nas-Port attribute (attribute number 5) for Ethernet interfaces: none Use the format specified in juniRadiusClientNasPortFormat extended Use the extended format determined by ethernet nas-port field width values.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), extended(1)  

juniRadiusClientNasPortFieldWidthEthernetSlot 1.3.6.1.4.1.4874.2.2.19.1.1.152
Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the slot of the ethernet interface when the value of juniRadiusClientEthernetNasPortFormat is extended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

juniRadiusClientNasPortFieldWidthEthernetAdapter 1.3.6.1.4.1.4874.2.2.19.1.1.153
Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the adapter of the ethernet interface when the value of juniRadiusClientEthernetNasPortFormat is extended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

juniRadiusClientNasPortFieldWidthEthernetPort 1.3.6.1.4.1.4874.2.2.19.1.1.154
Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the port of the ethernet interface when the value of juniRadiusClientEthernetNasPortFormat is extended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

juniRadiusClientNasPortFieldWidthEthernetSVlan 1.3.6.1.4.1.4874.2.2.19.1.1.155
Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the svlan of the ethernet interface when the value of juniRadiusClientEthernetNasPortFormat is extended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

juniRadiusClientNasPortFieldWidthEthernetVlan 1.3.6.1.4.1.4874.2.2.19.1.1.156
Specifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vlan of the ethernet interface when the value of juniRadiusClientEthernetNasPortFormat is extended.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..32  

juniRadiusClientRemoteCircuitIdFormat 1.3.6.1.4.1.4874.2.2.19.1.1.157
The set of PPPoE Remote Circuit Id components configured. Each octet in this object contains one of the values defined in the JuniRadiusClientRemoteCircuitIdFormatComponents TEXTUAL-CONVENTION. Only following combinations are permited: agentCircuitId remoteCircuitId agentCircutiId, remoteCircuitId nasIdentifier, agentCircuitId nasIdentifier, remoteCircuitId nasIdentifier, agentCircutiId, remoteCircuitId dsl-format-1.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..3)  

juniRadiusClientRemoteCircuitIdDelimiter 1.3.6.1.4.1.4874.2.2.19.1.1.158
The character use as for delimiting fields in the PPPoE Remote Circuit ID. The default value is '#'.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1)  

juniRadiusClientIncludeL2cAccessLoopParametersInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.159
Enables/disables the inclusion of the l2c-access-loop-parameters (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cDownStreamDataInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.160
Enables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cUpStreamDataInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.161
Enables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cDownStreamDataInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.162
Enables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cUpStreamDataInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.163
Enables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cDownStreamDataInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.164
Enables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cUpStreamDataInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.165
Enables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDslForumAttributesInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.166
Enables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDslForumAttributesInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.167
Enables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Accounting-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDslForumAttributesInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.168
Enables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAccessLoopCircuitIdInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.169
Enables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.170
Enables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.171
Enables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActualDataRateUstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.172
Enables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActualDataRateDstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.173
Enables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinimumDataRateUstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.174
Enables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinimumDataRateDstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.175
Enables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAttainDataRateUstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.176
Enables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAttainDataRateDstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.177
Enables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaximumDataRateUstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.178
Enables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaximumDataRateDstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.179
Enables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.180
Enables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.181
Enables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.182
Enables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActInterleavingDelayUstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.183
Enables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.184
Enables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActInterleavingDelayDstrInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.185
Enables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cDslLineStateInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.186
Enables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cDslTypeInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.187
Enables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAccessLoopCircuitIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.188
Enables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.189
Enables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.190
Enables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActualDataRateUstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.191
Enables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActualDataRateDstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.192
Enables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinimumDataRateUstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.193
Enables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinimumDataRateDstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.194
Enables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAttainDataRateUstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.195
Enables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAttainDataRateDstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.196
Enables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaximumDataRateUstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.197
Enables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaximumDataRateDstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.198
Enables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.199
Enables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.200
Enables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.201
Enables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActInterleavingDelayUstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.202
Enables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.203
Enables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActInterleavingDelayDstrInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.204
Enables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cDslLineStateInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.205
Enables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cDslTypeInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.206
Enables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAccessLoopCircuitIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.207
Enables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.208
Enables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.209
Enables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActualDataRateUstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.210
Enables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActualDataRateDstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.211
Enables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinimumDataRateUstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.212
Enables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinimumDataRateDstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.213
Enables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAttainDataRateUstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.214
Enables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cAttainDataRateDstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.215
Enables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaximumDataRateUstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.216
Enables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaximumDataRateDstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.217
Enables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.218
Enables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.219
Enables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.220
Enables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActInterleavingDelayUstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.221
Enables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.222
Enables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cActInterleavingDelayDstrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.223
Enables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cDslLineStateInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.224
Enables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeL2cDslTypeInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.225
Enables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeInterfaceIdInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.226
Enables/disables the inclusion of framed-interface-id (96) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6PrefixInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.227
Enables/disables the inclusion of framed-ipv6-prefix (97) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeInterfaceIdInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.228
Enables/disables the inclusion of framed-interface-id (96) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpAddrInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.229
Enables/disables the inclusion of framed-ip-address (8) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6PrefixInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.230
Enables/disables the inclusion of framed-ipv6-prefix (97) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDownStreamCalculatedQosRateInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.231
Enables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeUpStreamCalculatedQosRateInAccessReq 1.3.6.1.4.1.4874.2.2.19.1.1.232
Enables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Access-Request packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDownStreamCalculatedQosRateInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.233
Enables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeUpStreamCalculatedQosRateInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.234
Enables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDownStreamCalculatedQosRateInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.235
Enables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeUpStreamCalculatedQosRateInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.236
Enables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIgnorePppoeMaxSession 1.3.6.1.4.1.4874.2.2.19.1.1.237
Enables/disables ignoring the PPPoE Max Session (vsa) attribute in the RADIUS Access-Accept packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6AccountingInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.238
Enables/disables the inclusion of the IPv6 Accounting (VSA) attributes in the RADIUS Accounting-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDelegatedIpv6PrefixInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.239
Enables/disables the inclusion of delegated-ipv6-prefix (123) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeDelegatedIpv6PrefixInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.240
Enables/disables the inclusion of delegated-ipv6-prefix (123) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeFramedIpv6PoolInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.241
Enables/disables the inclusion of framed-ipv6-pool (100) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeFramedIpv6PoolInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.242
Enables/disables the inclusion of framed-ipv6-pool (100) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeFramedIpv6RouteInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.243
Enables/disables the inclusion of framed-ipv6-route (99) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeFramedIpv6RouteInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.244
Enables/disables the inclusion of framed-ipv6-route (99) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6LocalInterfaceInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.245
Enables/disables the inclusion of ipv6-local-interface (vsa) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6LocalInterfaceInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.246
Enables/disables the inclusion of ipv6-local-interface (vsa) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6NdRaPrefixInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.247
Enables/disables the inclusion of ipv6-nd-ra-prefix (vsa) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6NdRaPrefixInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.248
Enables/disables the inclusion of ipv6-nd-ra-prefix (vsa) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6PrimaryDnsInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.249
Enables/disables the inclusion of ipv6-primary-dns (vsa) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6PrimaryDnsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.250
Enables/disables the inclusion of ipv6-primary-dns (vsa) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6SecondaryDnsInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.251
Enables/disables the inclusion of ipv6-secondary-dns (vsa) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6SecondaryDnsInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.252
Enables/disables the inclusion of ipv6-secondary-dns (vsa) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6VirtualRouterInAcctStart 1.3.6.1.4.1.4874.2.2.19.1.1.253
Enables/disables the inclusion of ipv6-virtual-router (vsa) in the RADIUS Acct-Start packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusClientIncludeIpv6VirtualRouterInAcctStop 1.3.6.1.4.1.4874.2.2.19.1.1.254
Enables/disables the inclusion of ipv6-virtual-router (vsa) in the RADIUS Acct-Stop packet.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

juniRadiusAuthClientInvalidServerAddresses 1.3.6.1.4.1.4874.2.2.19.1.2.1
The number of RADIUS Access-Response packets received from unknown addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientServerTable 1.3.6.1.4.1.4874.2.2.19.1.2.2
The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniRadiusAuthClientServerEntry

juniRadiusAuthClientServerEntry 1.3.6.1.4.1.4874.2.2.19.1.2.2.1
An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniRadiusAuthClientServerEntry  

juniRadiusAuthClientServerAddress 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.1
The IP address of the RADIUS authentication server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

juniRadiusAuthClientServerPortNumber 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.2
The UDP port the client is using to send requests to this server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

juniRadiusAuthClientRoundTripTime 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.3
The time interval (in hundredths of seconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

juniRadiusAuthClientAccessRequests 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.4
The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientAccessRetransmissions 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.5
The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientAccessAccepts 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.6
The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientAccessRejects 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.7
The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientAccessChallenges 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.8
The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientMalformedAccessResponses 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.9
The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientBadAuthenticators 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.10
The number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientPendingRequests 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.11
The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject or Access-Challenge, a timeout or retransmission.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniRadiusAuthClientTimeouts 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.12
The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientUnknownTypes 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.13
The number of RADIUS packets of unknown type which were received from this server on the authentication port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientPacketsDropped 1.3.6.1.4.1.4874.2.2.19.1.2.2.1.14
The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAuthClientCfgServerTable 1.3.6.1.4.1.4874.2.2.19.1.2.3
The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniRadiusAuthClientCfgServerEntry

juniRadiusAuthClientCfgServerEntry 1.3.6.1.4.1.4874.2.2.19.1.2.3.1
An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniRadiusAuthClientCfgServerEntry  

juniRadiusAuthClientCfgServerAddress 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.1
The IP address of the RADIUS authentication server referred to in this table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

juniRadiusAuthClientCfgServerPortNumber 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.2
The UDP port the client is using to send requests to this server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

juniRadiusAuthClientCfgKey 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.3
The secret (RADIUS authenticator) used by the client during exchanges with this authentication server. The default is a zero-length string, indicating no authenticator is used.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

juniRadiusAuthClientCfgTimeoutInterval 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.4
The interval between retransmissions of a request to this authentication server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..1000  

juniRadiusAuthClientCfgRetries 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.5
The maximum number of times to resend a request to this authentication server (in addition to the original request), before resorting to the server specified in the next entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

juniRadiusAuthClientCfgMaxPendingRequests 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.6
The maximum number of outstanding requests this server can support.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 10..32000  

juniRadiusAuthClientCfgRowStatus 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.7
Supports 'createAndGo' and 'destroy' only.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniRadiusAuthClientCfgPrecedence 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.8
Relative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned by the device, in order of entry creation, from higher to lower precedence.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

juniRadiusAuthClientCfgDeadTime 1.3.6.1.4.1.4874.2.2.19.1.2.3.1.9
The period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if the server failure persists).
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1440  

juniRadiusAcctClientInvalidServerAddresses 1.3.6.1.4.1.4874.2.2.19.1.3.1
The number of RADIUS Accounting-Response packets received from unknown addresses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientServerTable 1.3.6.1.4.1.4874.2.2.19.1.3.2
The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniRadiusAcctClientServerEntry

juniRadiusAcctClientServerEntry 1.3.6.1.4.1.4874.2.2.19.1.3.2.1
An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniRadiusAcctClientServerEntry  

juniRadiusAcctClientServerAddress 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.1
The IP address of the RADIUS accounting server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

juniRadiusAcctClientServerPortNumber 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.2
The UDP port the client is using to send requests to this server.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

juniRadiusAcctClientRoundTripTime 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.3
The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

juniRadiusAcctClientRequests 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.4
The number of RADIUS Accounting-Request packets sent. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientRetransmissions 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.5
The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientResponses 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.6
The number of RADIUS packets received on the accounting port from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientMalformedResponses 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.7
The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientBadAuthenticators 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.8
The number of RADIUS Accounting-Response packets which contained invalid authenticators received from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientPendingRequests 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.9
The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout or a retransmission.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

juniRadiusAcctClientTimeouts 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.10
The number of accounting timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientUnknownTypes 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.11
The number of RADIUS packets of unknown type which were received from this server on the accounting port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientPacketsDropped 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.12
The number of RADIUS packets which were received from this server on the accounting port and dropped for some other reason.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientStartRequests 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.13
The number of RADIUS Accounting-Start request packets sent. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientInterimRequests 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.14
The number of RADIUS Accounting-Interim request packets sent. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientStopRequests 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.15
The number of RADIUS Accounting-Stop request packets sent. This does not include retransmissions.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientStartResponses 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.16
The number of RADIUS accounting-start response packets received on the accounting port from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientInterimResponses 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.17
The number of RADIUS accounting-interim response packets received on the accounting port from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientStopResponses 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.18
The number of RADIUS accounting-stop response packets received on the accounting port from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientRejectRequests 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.19
The number of RADIUS accounting-reject packets sent on the accounting port from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientRejectResponses 1.3.6.1.4.1.4874.2.2.19.1.3.2.1.20
The number of RADIUS accounting-reject response packets received on the accounting port from this server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

juniRadiusAcctClientCfgServerTable 1.3.6.1.4.1.4874.2.2.19.1.3.3
The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    JuniRadiusAcctClientCfgServerEntry

juniRadiusAcctClientCfgServerEntry 1.3.6.1.4.1.4874.2.2.19.1.3.3.1
An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
Status: current Access: not-accessible
OBJECT-TYPE    
  JuniRadiusAcctClientCfgServerEntry  

juniRadiusAcctClientCfgServerAddress 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.1
The IP address of the RADIUS accounting server referred to in this table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

juniRadiusAcctClientCfgServerPortNumber 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.2
The UDP port the client is using to send requests to this server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..65535  

juniRadiusAcctClientCfgKey 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.3
The secret (RADIUS authenticator) used by the client during exchanges with this accounting server. The default is a zero-length string, indicating no authenticator is used.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

juniRadiusAcctClientCfgTimeoutInterval 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.4
The interval between retransmissions of a request to this accounting server.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..1000  

juniRadiusAcctClientCfgRetries 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.5
The maximum number of times to resend a request to this accounting server (in addition to the original request), before resorting to the server specified in the next entry.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..100  

juniRadiusAcctClientCfgMaxPendingRequests 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.6
The maximum number of outstanding requests this server can support.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 10..96000  

juniRadiusAcctClientCfgRowStatus 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.7
Supports 'createAndGo' and 'destroy' only.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

juniRadiusAcctClientCfgPrecedence 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.8
Relative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned by the device, in order of entry creation, from higher to lower precedence.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

juniRadiusAcctClientCfgDeadTime 1.3.6.1.4.1.4874.2.2.19.1.3.3.1.9
The period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if the server failure persists).
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1440  

juniRadiusClientTrapControl 1.3.6.1.4.1.4874.2.2.19.4
OBJECT IDENTIFIER    

juniRadiusAuthClientUnavailableServer 1.3.6.1.4.1.4874.2.2.19.4.1
The IP address of the RADIUS client's former authentication server that is no longer available. The value of this object is equivalent to the prior value of juniRadiusAuthClientCfgServerAddress.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

juniRadiusAuthClientNextAvailableServer 1.3.6.1.4.1.4874.2.2.19.4.2
The next available RADIUS authentication server, replacing the one that is unavailable. The value of this object is equivalent to the current value of juniRadiusAuthClientCfgServerAddress.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

juniRadiusAcctClientUnavailableServer 1.3.6.1.4.1.4874.2.2.19.4.3
The IP address of the RADIUS client's former accounting server that is no longer available. The value of this object is equivalent to the prior value of juniRadiusAcctClientCfgServerAddress.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

juniRadiusAcctClientNextAvailableServer 1.3.6.1.4.1.4874.2.2.19.4.4
The next available RADIUS accounting server, replacing the one that is unavailable. The value of this object is equivalent to the current value of juniRadiusAcctClientCfgServerAddress.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

juniRadiusAuthClientAvailableServer 1.3.6.1.4.1.4874.2.2.19.4.5
The re-available RADIUS authentication server after a period of time called dead-time. The value of this object is equivalent to the current value of juniRadiusAuthClientCfgServerAddress.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

juniRadiusAcctClientAvailableServer 1.3.6.1.4.1.4874.2.2.19.4.6
The re-available RADIUS accounting server after a period of time called dead-time. The value of this object is equivalent to the current value of juniRadiusAcctClientCfgServerAddress.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

juniRadiusClientTraps 1.3.6.1.4.1.4874.2.2.19.3
OBJECT IDENTIFIER    

juniRadiusClientTrapPrefix 1.3.6.1.4.1.4874.2.2.19.3.0
OBJECT IDENTIFIER    

juniRadiusAuthClientServerUnavailable 1.3.6.1.4.1.4874.2.2.19.3.0.1
This trap will be generated when the requested authentication server is not available.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

juniRadiusAuthClientNoServerAvailable 1.3.6.1.4.1.4874.2.2.19.3.0.2
This trap will be generated when all of the requested servers were not available.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

juniRadiusAcctClientServerUnavailable 1.3.6.1.4.1.4874.2.2.19.3.0.3
This trap will be generated when the requested accounting server is not available.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

juniRadiusAcctClientNoServerAvailable 1.3.6.1.4.1.4874.2.2.19.3.0.4
This trap will be generated when all of the requested servers were not available.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

juniRadiusAuthClientServerAvailable 1.3.6.1.4.1.4874.2.2.19.3.0.5
This trap will be generated when the requested authentication server becomes available again after a period of time.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

juniRadiusAcctClientServerAvailable 1.3.6.1.4.1.4874.2.2.19.3.0.6
This trap will be generated when the requested accounting server becomes available again after a period of time.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

juniRadiusClientMIBConformance 1.3.6.1.4.1.4874.2.2.19.2
OBJECT IDENTIFIER    

juniRadiusClientMIBCompliances 1.3.6.1.4.1.4874.2.2.19.2.1
OBJECT IDENTIFIER    

juniRadiusClientMIBGroups 1.3.6.1.4.1.4874.2.2.19.2.2
OBJECT IDENTIFIER    

juniRadiusAuthClientCompliance 1.3.6.1.4.1.4874.2.2.19.2.1.1
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when the juniRadiusClientSourceAddress object was added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusAcctClientCompliance 1.3.6.1.4.1.4874.2.2.19.2.1.2
Obsolete compliance statement for accounting clients implementing the Juniper RADIUS Client MIB accounting functionality. This statement became obsolete when the juniRadiusClientSourceAddress object was added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusAuthClientCompliance2 1.3.6.1.4.1.4874.2.2.19.2.1.3
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when new objects were added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusAcctClientCompliance2 1.3.6.1.4.1.4874.2.2.19.2.1.4
Obsolete compliance statement for accounting clients implementing the Juniper RADIUS Client MIB accounting functionality. This statement became obsolete when new objects were added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance 1.3.6.1.4.1.4874.2.2.19.2.1.5
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when new B-RAS objects were added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance2 1.3.6.1.4.1.4874.2.2.19.2.1.6
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when new objects were added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance3 1.3.6.1.4.1.4874.2.2.19.2.1.7
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when the juniRadiusClientNasIpAddrUse object was added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance4 1.3.6.1.4.1.4874.2.2.19.2.1.8
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when objects were added to indicate which RADIUS attributes should be included or excluded from RADIUS packets.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance5 1.3.6.1.4.1.4874.2.2.19.2.1.9
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when notifications for unavailable RADIUS servers were added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance6 1.3.6.1.4.1.4874.2.2.19.2.1.10
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when attribute-ignore objects were added to the B-RAS group and accounting and authetication servers available notifications were added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance7 1.3.6.1.4.1.4874.2.2.19.2.1.11
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when authentication and accounting objects were added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance8 1.3.6.1.4.1.4874.2.2.19.2.1.12
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when accounting reject counters were added.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance9 1.3.6.1.4.1.4874.2.2.19.2.1.13
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when new object was added to the BRAS group to indicate which RADIUS attributes should be included or excluded from RADIUS packets.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance10 1.3.6.1.4.1.4874.2.2.19.2.1.14
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when new objects were added to indicate which RADIUS attributes for DHCP VSAs should be included or excluded from RADIUS packets.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance11 1.3.6.1.4.1.4874.2.2.19.2.1.15
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance12 1.3.6.1.4.1.4874.2.2.19.2.1.16
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance13 1.3.6.1.4.1.4874.2.2.19.2.1.17
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance14 1.3.6.1.4.1.4874.2.2.19.2.1.18
The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance15 1.3.6.1.4.1.4874.2.2.19.2.1.19
Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance16 1.3.6.1.4.1.4874.2.2.19.2.1.20
The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance17 1.3.6.1.4.1.4874.2.2.19.2.1.21
The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.
Status: obsolete Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusClientCompliance18 1.3.6.1.4.1.4874.2.2.19.2.1.22
The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE    

juniRadiusGeneralClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.1
Obsolete basic collection of objects providing management of RADIUS Clients. This group became obsolete when juniRadiusClientSourceAddress was added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusAuthClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.2
Obsolete collection of objects providing management of RADIUS Authentication Clients. This group became obsolete when notification objects for an unavailable authentication server were added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusAcctClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.3
Obsolete collection of objects providing management of RADIUS Accounting Clients. This group became obsolete when notification objects for an unavailable accounting server were added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusGeneralClientGroup2 1.3.6.1.4.1.4874.2.2.19.2.2.4
Obsolete basic collection of objects providing management of RADIUS Clients. This group became obsolete when new objects were added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBasicClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.5
Obsolete collection of objects providing basic management of RADIUS Clients. This group became obsolete when the juniRadiusClientRollover object was added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.6
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusTunnelClientGroup 1.3.6.1.4.1.4874.2.2.19.2.2.7
An object providing management of tunneling functions for RADIUS Clients.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup2 1.3.6.1.4.1.4874.2.2.19.2.2.8
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when the juniRadiusClientCallingStationIdFormat object was added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBasicClientGroup2 1.3.6.1.4.1.4874.2.2.19.2.2.9
A collection of objects providing basic management of RADIUS Clients.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup3 1.3.6.1.4.1.4874.2.2.19.2.2.10
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when the juniRadiusClientNasIpAddrUse object was added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup4 1.3.6.1.4.1.4874.2.2.19.2.2.11
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects were added to indicate which RADIUS attributes should be included or excluded from RADIUS packets.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup5 1.3.6.1.4.1.4874.2.2.19.2.2.12
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects to ignore attributes and enable/disable traps were added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusAuthClientGroup2 1.3.6.1.4.1.4874.2.2.19.2.2.13
Obsolete collection of objects providing management of RADIUS Authentication Clients. This group became obsolete when authentication server available notification support was added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusAcctClientGroup2 1.3.6.1.4.1.4874.2.2.19.2.2.14
Obsolete collection of objects providing management of RADIUS Accounting Clients. This group became obsolete when detailed accounting statistics and accounting server available notification support were added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusAuthNotificationGroup 1.3.6.1.4.1.4874.2.2.19.2.2.15
Obsolete collection of management notifications for RADUIS authentication events. This group became obsolete when authentication server available notification was added.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-GROUP    

juniRadiusAcctNotificationGroup 1.3.6.1.4.1.4874.2.2.19.2.2.16
Obsolete collection of management notifications for RADUIS accounting events. This group became obsolete when accounting server available notification was added.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-GROUP    

juniRadiusBrasClientGroup6 1.3.6.1.4.1.4874.2.2.19.2.2.17
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects for PPPoE Nas-Port format were added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusAuthClientGroup3 1.3.6.1.4.1.4874.2.2.19.2.2.18
A collection of objects providing management of RADIUS Authentication Clients.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusAcctClientGroup3 1.3.6.1.4.1.4874.2.2.19.2.2.19
Obsolete collection of objects providing management of RADIUS Accounting Clients. This group became obsolete when reject counters were added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusAuthNotificationGroup2 1.3.6.1.4.1.4874.2.2.19.2.2.20
Management notifications for RADUIS authentication events.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

juniRadiusAcctNotificationGroup2 1.3.6.1.4.1.4874.2.2.19.2.2.21
Management notifications for RADUIS accounting events.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

juniRadiusBrasClientGroup7 1.3.6.1.4.1.4874.2.2.19.2.2.22
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when an object for VLAN Nas-Port format was added.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusAcctClientGroup4 1.3.6.1.4.1.4874.2.2.19.2.2.23
A collection of objects providing management of RADIUS Accounting Clients.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup8 1.3.6.1.4.1.4874.2.2.19.2.2.24
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added to indicate which RADIUS attributes should be included or excluded from RADIUS packets.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup9 1.3.6.1.4.1.4874.2.2.19.2.2.25
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup10 1.3.6.1.4.1.4874.2.2.19.2.2.26
A collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added to enable/disable the overriding of the nas-port-id and/or calling-station-id values with the PPPoE Remote Circuit Id.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup11 1.3.6.1.4.1.4874.2.2.19.2.2.27
Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup12 1.3.6.1.4.1.4874.2.2.19.2.2.28
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup13 1.3.6.1.4.1.4874.2.2.19.2.2.29
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup14 1.3.6.1.4.1.4874.2.2.19.2.2.30
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup15 1.3.6.1.4.1.4874.2.2.19.2.2.31
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup16 1.3.6.1.4.1.4874.2.2.19.2.2.32
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup17 1.3.6.1.4.1.4874.2.2.19.2.2.33
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup18 1.3.6.1.4.1.4874.2.2.19.2.2.34
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup19 1.3.6.1.4.1.4874.2.2.19.2.2.35
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: obsolete Access: accessible-for-notify
OBJECT-GROUP    

juniRadiusBrasClientGroup20 1.3.6.1.4.1.4874.2.2.19.2.2.36
A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor