KYOCERA-Private-MIB

File: KYOCERA-Private-MIB.mib (41424 bytes)

Imported modules

HOST-RESOURCES-MIB RFC-1212 SNMPv2-TC
RFC1155-SMI

Imported symbols

hrDeviceIndex OBJECT-TYPE DisplayString
enterprises

Defined Types

KcprtGeneralEntry  
SEQUENCE    
  kcprtGeneralModelName DisplayString
  kcprtOptionVersion DisplayString
  kcprtKpdlLevel INTEGER
  kcprtSystemUpTime INTEGER
  kcprtBinNumber INTEGER
  kcprtCardSlotCapacity INTEGER
  kcprtRomSlotCapacity INTEGER
  kcprtSimmSlotCapacity INTEGER
  kcprtSimmSlotUsed INTEGER
  kcprtOriginalMemorySize INTEGER
  kcprtTotalMemorySize INTEGER
  kcprtUserMemorySize INTEGER
  kcprtVirtualMemory INTEGER
  kcprtPageMemorySize INTEGER
  kcprtHostBufferSize INTEGER
  kcprtHostBuffer1stRate INTEGER
  kcprtHostBuffer2ndRate INTEGER
  kcprtHostBuffer3rdRate INTEGER
  kcprtHostBufferOption INTEGER
  kcprtBufferXoffLevel INTEGER
  kcprtBufferXonLevel INTEGER
  kcprtFFTimeout INTEGER
  kcprtSleepTimer INTEGER
  kcprtWakeupStatusPage INTEGER
  kcprtOnlineControl INTEGER
  kcprtCopyCount INTEGER

KcprtCpuEntry  
SEQUENCE    
  kcprtCpuIndex INTEGER
  kcprtCpuName DisplayString
  kcprtCpuClock INTEGER
  kcprtCpuRole INTEGER
  kcprtFirmwareVersion DisplayString
  kcprtFirmwareUpdate INTEGER

KcprtOutputEntry  
SEQUENCE    
  kcprtOutputIndex INTEGER
  kcprtOutputMode INTEGER
  kcprtOutputMultiMode INTEGER
  kcprtOutputGroupNumber INTEGER
  kcprtOutputDefaultGroup INTEGER
  kcprtOutputBulkStatus INTEGER
  kcprtOutputTrayMaxCapacity INTEGER

KcprtTrayGroupEntry  
SEQUENCE    
  kcprtTrayGroupIndex INTEGER
  kcprtTrayGroupBeginIndex INTEGER
  kcprtTrayGroupEndIndex INTEGER

KcprtOutputTrayEntry  
SEQUENCE    
  kcprtOutputTrayIndex INTEGER
  kcprtOutputTrayOrder INTEGER
  kcprtOutputTrayGroup INTEGER
  kcprtOutputTrayCount INTEGER

KcprtMarkerEntry  
SEQUENCE    
  kcprtMarkerIndex INTEGER
  kcprtMarkerKirLevel INTEGER
  kcprtMarkerEcoprintLevel INTEGER
  kcprtMarkerAddressabilityFeedDirDeclared INTEGER
  kcprtMarkerAddressabilityXFeedDirDeclared INTEGER
  kcprtMarkerAddressabilityFeedDirChosen INTEGER
  kcprtMarketAddressabilityXFeedDirChosen INTEGER

KcprtChannelEntry  
SEQUENCE    
  kcprtChannelIndex INTEGER
  kcprtChannelFunction INTEGER

KcprtMemoryDeviceEntry  
SEQUENCE    
  kcprtMemoryDeviceIndex INTEGER
  kcprtMemoryDeviceLocation INTEGER
  kcprtMemoryDeviceType INTEGER
  kcprtMemoryDeviceTotalSize INTEGER
  kcprtMemoryDeviceUsedSize INTEGER
  kcprtMemoryDeviceStatus INTEGER

KcprtPartitionEntry  
SEQUENCE    
  kcprtPartitionIndex INTEGER
  kcprtPartitionSize INTEGER
  kcprtPartitionLocation INTEGER
  kcprtPartitionResourceType INTEGER
  kcprtPartitionName DisplayString
  kcprtPartitionLoad INTEGER

KcprtMacroDataEntry  
SEQUENCE    
  kcprtMacroDataIndex INTEGER
  kcprtMacroDataName DisplayString
  kcprtMacroDataID INTEGER
  kcprtMacroDataType INTEGER
  kcprtMacroDataAutoLoad INTEGER
  kcprtMacroDataLocation INTEGER
  kcprtMacroDataAttribute INTEGER

KcprtHostDataEntry  
SEQUENCE    
  kcprtHostDataIndex INTEGER
  kcprtHostDataname DisplayString
  kcprtHostDataLocation INTEGER
  kcprtHostDataAttribute INTEGER

KcprtProgramDataEntry  
SEQUENCE    
  kcprtProgramDataIndex INTEGER
  kcprtProgramDataName DisplayString
  kcprtProgramDataType INTEGER
  kcprtProgramDataLocation INTEGER
  kcprtProgramDataAttribute INTEGER

KcprtMessageDataEntry  
SEQUENCE    
  kcprtMessageDataIndex INTEGER
  kcprtMessageDataName DisplayString
  kcprtMessageDataLocation INTEGER
  kcprtMessageDataAttribute INTEGER

KcprtFontDataEntry  
SEQUENCE    
  kcprtFontDataIndex INTEGER
  kcprtTypeFaceName DisplayString
  kcprtFontID INTEGER
  kcprtFontType INTEGER
  kcprtFontLocation INTEGER
  kcprtFontAttribute INTEGER

Defined Values

kyocera 1.3.6.1.4.1.1347
OBJECT IDENTIFIER    

kcPrinter 1.3.6.1.4.1.1347.43
OBJECT IDENTIFIER    

kcprtGeneral 1.3.6.1.4.1.1347.43.5
OBJECT IDENTIFIER    

kcprtOutput 1.3.6.1.4.1.1347.43.9
OBJECT IDENTIFIER    

kcprtMarker 1.3.6.1.4.1.1347.43.10
OBJECT IDENTIFIER    

kcprtChannel 1.3.6.1.4.1.1347.43.14
OBJECT IDENTIFIER    

kcprtMemoryResource 1.3.6.1.4.1.1347.43.20
OBJECT IDENTIFIER    

kcprtGeneralTable 1.3.6.1.4.1.1347.43.5.1
This table contains the generic parameters that is applied to the KYOCERA network printer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtGeneralEntry

kcprtGeneralEntry 1.3.6.1.4.1.1347.43.5.1.1
A list of general entries for KYOCERA printer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtGeneralEntry  

kcprtGeneralModelName 1.3.6.1.4.1.1347.43.5.1.1.1
The printer's model name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

kcprtOptionDescription 1.3.6.1.4.1.1347.43.5.1.1.2
The string used for identify the option interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..10)  

kcprtKpdlLevel 1.3.6.1.4.1.1347.43.5.1.1.3
The level of KPDL. The value (0) means KPDL is not supported or KPDL ROM is missing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

kcprtSystemUpTime 1.3.6.1.4.1.1347.43.5.1.1.4
The amount of time since this printer was last powered on. Unit is second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4294967295  

kcprtBinNumber 1.3.6.1.4.1.1347.43.5.1.1.5
The number of paper bins that is implemented within printer itself. This number does not show all of input bin number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

kcprtCardSlotCapacity 1.3.6.1.4.1.1347.43.5.1.1.6
The number of IC card slots that this printer actually has. The value (0) means this printer has no IC card slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

kcprtRomSlotCapacity 1.3.6.1.4.1.1347.43.5.1.1.7
The number of option ROM slots. The value (0) means this printer has no option ROM slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

kcprtSimmSlotCapacity 1.3.6.1.4.1.1347.43.5.1.1.8
The number of SIMM slots that this printer actually has.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

kcprtSimmSlotUsed 1.3.6.1.4.1.1347.43.5.1.1.9
The number of SIMM slots that is currently used for SIMM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

kcprtOriginalMemorySize 1.3.6.1.4.1.1347.43.5.1.1.10
The amount of memory that this printer has on its controller board. Note this value does not include any other optional memory. Unit is kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4294967295  

kcprtTotalMemorySize 1.3.6.1.4.1.1347.43.5.1.1.11
The amount of memory that this printer actually has. Unit is kilobytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4294967295  

kcprtUserMemorySize 1.3.6.1.4.1.1347.43.5.1.1.12
The amount of memory that is available for user. Unit is kilobyte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4294967295  

kcprtVirtualMemory 1.3.6.1.4.1.1347.43.5.1.1.13
This object shows whether this printer has the virtual memory function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notSupported(0), support(1)  

kcprtPageMemorySize 1.3.6.1.4.1.1347.43.5.1.1.14
The page memory size corresponding to the FRPO R5 parameter. Because each model of our printer has slightly different value combination, it is recommended to verify the value after writing. Please ask to KYOCERA about the value combination for each printer. For example, our A3 type printer does not have this capability so that The value will be always 512KB(3). The value (-1) means others. Writing (-1) has no meaning.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER size-128KB(1), size-256KB(2), size-512KB(3), size-A4orLetter(4), size-Legal(5), size-doubleA4orLetter(6), size-doubleLegal(7)  

kcprtHostBufferSize 1.3.6.1.4.1.1347.43.5.1.1.15
The host buffer size in units of ten kilobytes. The value(0) means that the host buffer size is 5 Kbytes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

kcprtHostBuffer1stRate 1.3.6.1.4.1.1347.43.5.1.1.16
The ratio of the main host buffer size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..9  

kcprtHostBuffer2ndRate 1.3.6.1.4.1.1347.43.5.1.1.17
The ratio of the 2nd host buffer size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..9  

kcprtHostBuffer3rdRate 1.3.6.1.4.1.1347.43.5.1.1.18
The ratio of the 3rd host buffer size. Note that this entry will be 'not accessible' if the printer has only two interfaces.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..9  

kcprtHostBufferOption 1.3.6.1.4.1.1347.43.5.1.1.19
In the automatic mode, the first data arriving from the computer go into main buffer (1st buffer). In the fixed mode, each buffer is fixed on the appropriate interface. Refer to User's manual.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(0), fixed(1)  

kcprtBufferXoffLevel 1.3.6.1.4.1.1347.43.5.1.1.20
The printer will pause for receiving data when the ratio of occupied data on the host buffer reaches this threshold level. Note that this value should be larger than kcprtBufferXonLevel. If not, the value is ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

kcprtBufferXonLevel 1.3.6.1.4.1.1347.43.5.1.1.21
The printer will begin to receive data again when the ratio of occupied data on the host buffer becomes lower than this threshould level. Note that value should be less than kcprtBufferXoffLevel. If not, the value is ignored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

kcprtFFTimeout 1.3.6.1.4.1.1347.43.5.1.1.22
The form-feed time-out timer in units of five seconds. The value (0) means the time-out timer is off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..99  

kcprtSleepTimer 1.3.6.1.4.1.1347.43.5.1.1.23
The value of sleep timer in units of five minutes. The value (0) means the sleep timer is off.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..24  

kcprtWakeupStatusPage 1.3.6.1.4.1.1347.43.5.1.1.24
If enable, a printer generates the status page each time it comes up.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

kcprtOnlineControl 1.3.6.1.4.1.1347.43.5.1.1.25
This object controls the on/off line status. Note the writing value does not apply in some situation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER offLine(0), onLine(1)  

kcprtCopyCount 1.3.6.1.4.1.1347.43.5.1.1.26
The default copy number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..999  

kcprtCpuTable 1.3.6.1.4.1.1347.43.5.4
Information of CPU that is implemented in the printer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtCpuEntry

kcprtCpuEntry 1.3.6.1.4.1.1347.43.5.4.1
A list of CPU information for KYOCERA printer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtCpuEntry  

kcprtCpuIndex 1.3.6.1.4.1.1347.43.5.4.1.1
A unique value used by the printer to identify CPU on the printer's controller.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtCpuName 1.3.6.1.4.1.1347.43.5.4.1.2
The CPU model name, such as '68EC040'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

kcprtCpuClock 1.3.6.1.4.1.1347.43.5.4.1.3
The clock speed of CPU in unit of MHz.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtCpuRole 1.3.6.1.4.1.1347.43.5.4.1.4
The role of this CPU. The value (-1) means others.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER engine(0), controller(1)  

kcprtFirmwareVersion 1.3.6.1.4.1.1347.43.5.4.1.5
The version string for the firmware of this CPU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

kcprtFirmwareUpdata 1.3.6.1.4.1.1347.43.5.4.1.6
Shows whether this firmware can be updated on the controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(3), disabled(4)  

kcprtOutputTable 1.3.6.1.4.1.1347.43.9.1
This table contains the basic part of the output unit. The main purpose is to control SO-6.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtOutputEntry

kcprtOutputEntry 1.3.6.1.4.1.1347.43.9.1.1
A list of information for the output unit, especially for the SO-6.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtOutputEntry  

kcprtOutputIndex 1.3.6.1.4.1.1347.43.9.1.1.1
The value of the prtOutputIndex of this printer that this entry is associated with.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtOutputMode 1.3.6.1.4.1.1347.43.9.1.1.2
The operation mode of the sorter. If this device does not support the sorter function, the reading value is (-1) and all writing are ignored. Also, writing value (-1) does not take effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sorter(0), collator(1), stacker(2), mailbox(3)  

kcprtOutputMultiMode 1.3.6.1.4.1.1347.43.9.1.1.3
In the multiple mode, the sorter can simultaneously be used by different computers. Each computer may assign its own output trays. This value determines how the tray is selected. The value (-1) means others or 'not supported'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), id-specific(1), if-specific(2)  

kcprtOutputGroupNumber 1.3.6.1.4.1.1347.43.9.1.1.4
This entry shows how many groups are existing on the output device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtOutputDefaultGroup 1.3.6.1.4.1.1347.43.9.1.1.5
The value of the kcprtTrayGroupIndex corresponding to the current output tray group in a sorter. This value has no meaning if this output unit is not a soter. The value (0) means that the multiple mode is disabled and all of trays will be able to use. Writing value (0) indicates a selection of bulkTray . Writing is only allowed when the multiple mode is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

kcprtOutputBulkStatus 1.3.6.1.4.1.1347.43.9.1.1.6
This entry shows current status of the bulk tray. Since the bulk tray of SO-6 has only a full sensor, this entry has only two states. In future, the state will be added.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notFull(0), full(1)  

kcprtOutputTrayMaxCapacity 1.3.6.1.4.1.1347.43.9.1.1.7
This entry shows how many pages the tray on this output device can hold. Unit is sheet.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtTrayGroupTable 1.3.6.1.4.1.1347.43.9.2
The concept of Group is for the multiple computer environment. These contents take effect when kcprtOutputMultiMode is enable. For further information, refer to the sorter manual. Note in case of off (0), the access to this content is ineffective.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtTrayGroupEntry

kcprtTrayGroupEntry 1.3.6.1.4.1.1347.43.9.2.1
A list of information about the tray group on the multiple tray device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtTrayGroupEntry  

kcprtTrayGroupIndex 1.3.6.1.4.1.1347.43.9.2.1.1
The unique value used by the printer to identify each tray groups. Note that this value will be changed while the printer power cycles if Prescribe ASTK command is issued.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtTrayGroupBeginIndex 1.3.6.1.4.1.1347.43.9.2.1.2
The value of the kcprtOutputTrayIndex corresponding to the tray that is assigned as the begining of this group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtTrayGroupEndIndex 1.3.6.1.4.1.1347.43.9.2.1.3
The value of the kcprtOutputTrayIndex corresponding to the tray that is assigned as the end of this group. This index is automatically assigned by the printer when the group is created. Please refer to thePrescribe manual for detailed information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtOutputTrayTable 1.3.6.1.4.1.1347.43.9.3
Note in case of off (0), the access to this content is ineffective.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtOutputTrayEntry

kcprtOutputTrayEntry 1.3.6.1.4.1.1347.43.9.3.1
A list of information about the individual tray.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtOutputTrayEntry  

kcprtOutputTrayIndex 1.3.6.1.4.1.1347.43.9.3.1.1
The unique value used by a printer to identify each trays. Values are expected to remain stable across successive printer power cycle. This contents has no meaning except for a sorter device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtOutputTrayOrder 1.3.6.1.4.1.1347.43.9.3.1.2
The output order for trays. The beginning number is (1) and the last number should be equal to the maximum tray number. When the multiple mode is available, the order in the appropriate group is determined by this entry. The number should be unique and continuous in one group or the whole if the group function is disabled. The value (0) means the order has not been determined. In case all of the trays are not determined, the sorter will operate in default settings. About default settings, refer to the sorter's manual. Currently this entry is read-only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtOutputTrayGroup 1.3.6.1.4.1.1347.43.9.3.1.3
The value of kcprtTrayGroupIndex corresponding to the group that this tray is assigned to. The value (0) means this tray is not assigned to a group or the multiple mode is disable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtOutputTrayCount 1.3.6.1.4.1.1347.43.9.3.1.4
The count of page that the tray may be holding. Since the tray cannot count the page that it has currently, the value is not always same as the actual page counts. If all of paper is removed, this value will be 0. In SO-6, there is no full sensor. So, if the application needs to know whether the tray is full or not, the application should compare this value with OutputTrayMaxCapacity. In some case, the printer is turned on with remaining some pages on the tray for example, this value will be same as MaxCapacity to inform that paper is remaining and demand to remove the page.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtMarkerTable 1.3.6.1.4.1.1347.43.10.1
This table contains some useful entries to control the marker specific function.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtMarkerEntry

kcprtMarkerEntry 1.3.6.1.4.1.1347.43.10.1.1
A list of entries that corresponds each function of the marker.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtMarkerEntry  

kcprtMarkerIndex 1.3.6.1.4.1.1347.43.10.1.1.1
The value of the prtMarkerIndex of the printer devices with which it is associated.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtMarkerKirLevel 1.3.6.1.4.1.1347.43.10.1.1.2
The value that shows current KIR level. The value (0) means off or not support (0).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER offOrNotSupport(0), light(1), medium(2), dark(3)  

kcprtMarkerEcoprintLevel 1.3.6.1.4.1.1347.43.10.1.1.3
The value that shows current Ecoprint level. The value (0) means off or not support.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER offOrNotSupport(0), light(1), medium(2), dark(3)  

kcprtMarkerAddressabilityFeedDirDeclared 1.3.6.1.4.1.1347.43.10.1.1.4
This object provides the value of the declared addressability, in the feed direction, of this marker. This addressability is measured in prtMarkerAddressabilityUnit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

kcprtMarkerAddressabilityXFeedDirDeclared 1.3.6.1.4.1.1347.43.10.1.1.5
This object provides the value of declared dimension, in the cross feed direction, of this marker device. This addressability is measured in prtMarkerAddressabilityUnit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

kcprtMarkerAddressablilityFeedDirChosen 1.3.6.1.4.1.1347.43.10.1.1.6
The value of the addressability, in the feed direction, chosen by the printer. If the printer supports the declared addressability, this addressability is the same as the declared addressability. If not, this addressability is set to the closest addressability that the printer supports when the declared dimension is set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtMarkerAddressablilityXFeedDirChosen 1.3.6.1.4.1.1347.43.10.1.1.7
The value of the addressability, in the cross feed direction, chosen by the printer. If the printer supports the declared addressability, this addressability is the same as the declared addressability. If not, this addressability is set to the closest addressability that the printer supports when the declared dimension is set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtChannelTable 1.3.6.1.4.1.1347.43.14.1
This table control's HEX dump function.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtChannelEntry

kcprtChannelEntry 1.3.6.1.4.1.1347.43.14.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtChannelEntry  

kcprtChannelIndex 1.3.6.1.4.1.1347.43.14.1.1.1
The value of the prtChannelIndex of the printer device that this prtChannelEntry is associated with.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtChannelFunction 1.3.6.1.4.1.1347.43.14.1.1.2
The current state of the function of this channel. KYOCERA printer can set the hex dump mode to interface (channel). Writing affects all interface(channel).This setting is only valid for one job. After processing the job, this entry automatically returns 'through(0)'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER through(0), hexDump(1)  

kcprtMemoryDeviceTable 1.3.6.1.4.1.1347.43.20.1
This table contains information for each memory device, such as the IC-Card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtMemoryDeviceEntry

kcprtMemoryDeviceEntry 1.3.6.1.4.1.1347.43.20.1.1
A list of entries that are corresponding to the each function of the memory device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtMemoryDeviceEntry  

kcprtMemoryDeviceIndex 1.3.6.1.4.1.1347.43.20.1.1.1
A unique value that is corresponding to each memory device, such as IC-Card. The value assignment will change if the IC-Card is removed or inserted.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtMemoryDeviceLocation 1.3.6.1.4.1.1347.43.20.1.1.2
The value shows the location of this memory device. Note that if the location is download area, only the resource that has been assigned to the current interface can be managed. To see other resources, the management application have to change the current interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER icCardSlot-A(0), icCardslot-B(1), optionROMsocket(2), residentFont(3), downloadArea(4), others(255)  

kcprtMemoryDeviceType 1.3.6.1.4.1.1347.43.20.1.1.3
The value shows the type of this memory device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER rom(0), flash(1), sram(2), dram(3), others(255)  

kcprtMemoryDeviceTotalSize 1.3.6.1.4.1.1347.43.20.1.1.4
The maximum space of the memory device. Unit is bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtMemoryDeviceUsedSize 1.3.6.1.4.1.1347.43.20.1.1.5
The amount of occupied space on the device. Unit is bytes. If the device cannot detect the amount, the value is (-1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtMemoryDeviceStatus 1.3.6.1.4.1.1347.43.20.1.1.6
This value shows current status of this device. 'not accessible' means that the printer recognized the device but the access is impossible. 'battery low' is for a kind of battery backuped device, such as IC-card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER readyReadWrite(0), readyReadOnly(1), notAccessible(2), lowBattery(4)  

kcprtPartitionTable 1.3.6.1.4.1.1347.43.20.2
This table contains partition information for each device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtPartitionEntry

kcprtPartitionEntry 1.3.6.1.4.1.1347.43.20.2.1
A list of entries that is corresponding to the each information about the partition.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtPartitionEntry  

kcprtPartitionIndex 1.3.6.1.4.1.1347.43.20.2.1.1
A unique value corresponding to the each partition on the printer's memory device. This assigment will change in some cases.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtPartitionSize 1.3.6.1.4.1.1347.43.20.2.1.2
This value shows the size of this partition. Unit is byte.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtPartitionLocation 1.3.6.1.4.1.1347.43.20.2.1.3
This value of kcprtMemoryDeviceIndex corresponding to the device on which this partition exists. If the device is unknown, this value is (-1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtPartitionResourceType 1.3.6.1.4.1.1347.43.20.2.1.4
The type of the resource that is using this partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER void(0), macro(3), hostData(4), programData(5), messageData(6), fontData(7)  

kcprtPartitionName 1.3.6.1.4.1.1347.43.20.2.1.5
The name that is assigned to this partition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..15)  

kcprtPartitionLoad 1.3.6.1.4.1.1347.43.20.2.1.6
This value shows whether this partition has been read by the printer. basically, the resource should be read by the printer to make it available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notLoaded(0), loaded(1)  

kcprtMacroDataTable 1.3.6.1.4.1.1347.43.20.3
This table contains information about MACRO resource.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtMacroDataEntry

kcprtMacroDataEntry 1.3.6.1.4.1.1347.43.20.3.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtMacroDataEntry  

kcprtMacroDataIndex 1.3.6.1.4.1.1347.43.20.3.1.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtMacroDataName 1.3.6.1.4.1.1347.43.20.3.1.2
This value will be effective if the macro is described in Prescribe. Otherwise, this value will be NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..4)  

kcprtMacroDataID 1.3.6.1.4.1.1347.43.20.3.1.3
This value will be effective if the macro is described in PCL. Otherwise, the value will be unknown(-1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtMacroDataType 1.3.6.1.4.1.1347.43.20.3.1.4
This value is corresponding to the PDL that is used for decribing this macro.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER prescribe(1), pcl(2), others(255)  

kcprtMacroDataAutoLoad 1.3.6.1.4.1.1347.43.20.3.1.5
This value shows the state of the form overlay function that is controled by AMCR command. Only one macro can be set as 'on', so at most one entry will have 'on' value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(0), onWithInitialize(1), onWithoutInitialize(2)  

kcprtMacroDataLocation 1.3.6.1.4.1.1347.43.20.3.1.6
The value of kcprtMemoryDeviceIndex correspinding to the device that this macro is currently stored. unknown is (-1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtMacroDataAttribute 1.3.6.1.4.1.1347.43.20.3.1.7
'not registered' means this resource is existing on the device but it is not available for the printer. For example, macro on the IC card that is inserted into the printer after turning on will be 'not registered'. To turn it into 'registered', user must select them from the front panel menu.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notRegistered(0), registered(1)  

kcprtHostDataTable 1.3.6.1.4.1.1347.43.20.4
This table contains information about the host data. Note that 'Host data' does not mean the job itself.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtHostDataEntry

kcprtHostDataEntry 1.3.6.1.4.1.1347.43.20.4.1
A list of entries that are corresponding each information of the host data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtHostDataEntry  

kcprtHostDataIndex 1.3.6.1.4.1.1347.43.20.4.1.1
A unique value corresponding to each information of the host data. The assigment will change in some case.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtHostDataName 1.3.6.1.4.1.1347.43.20.4.1.2
The name that is used for descriminating each host data.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..15)  

kcprtHostDataLocation 1.3.6.1.4.1.1347.43.20.4.1.3
The value of kcprtMemoryDeviceIndex that is corresponding to the device in which this host data is stored. If the device is unknown, the value is -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtHostDataAttribute 1.3.6.1.4.1.1347.43.20.4.1.4
Basically, the value is always 'registered'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notRegistered(0), registered(1)  

kcprtProgramDataTable 1.3.6.1.4.1.1347.43.20.5
This table contains information about the program data. The program data is a kind of emulation and a Prescribe command, not a macro.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtProgramDataEntry

kcprtProgramDataEntry 1.3.6.1.4.1.1347.43.20.5.1
A list of entries that are corresponding to each information of the program data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtProgramDataEntry  

kcprtProgramDataIndex 1.3.6.1.4.1.1347.43.20.5.1.1
A unique value corresponding to each program data. This assigment may change in some case.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtProgramDataName 1.3.6.1.4.1.1347.43.20.5.1.2
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..15)  

kcprtProgramDataType 1.3.6.1.4.1.1347.43.20.5.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER emulation(0), prescribe(1), others(255)  

kcprtProgramDataLocation 1.3.6.1.4.1.1347.43.20.5.1.4
The value of kcprtMemoryDeviceIndex corresponding to the device in which this program data is stored. If the device is unknown, the value is (-1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtProgramDataAttribute 1.3.6.1.4.1.1347.43.20.5.1.5
'running' means the program is running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notRegistered(0), registered(1), running(2)  

kcprtMessageDataTable 1.3.6.1.4.1.1347.43.20.6
This is a bunch of message that is handled as one of the flont panel language by the printer.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtMessageDataEntry

kcprtMessageDataEntry 1.3.6.1.4.1.1347.43.20.6.1
A list of entries that are corresponding to each information of the message data.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtMessageDataEntry  

kcprtMessageDataIndex 1.3.6.1.4.1.1347.43.20.6.1.1
The index vaule that is assigned to each front panel language.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtMessageDataName 1.3.6.1.4.1.1347.43.20.6.1.2
The name of the message data block.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..15)  

kcprtMessageDataLocation 1.3.6.1.4.1.1347.43.20.6.1.3
The value of kcprtMemoryDeviceIndex corresponding to the device in which this message data is stored. If the device is unknown, the value is -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtMessageDataAttribute 1.3.6.1.4.1.1347.43.20.6.1.4
Always 'registered' in the current products.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notRegistered(0), registered(1)  

kcprtFontDataTable 1.3.6.1.4.1.1347.43.20.7
This table contains font information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KcprtFontDataEntry

kcprtFontDataEntry 1.3.6.1.4.1.1347.43.20.7.1
A list of entries that are corresponding each information of the font.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KcprtFontDataEntry  

kcprtFontDataIndex 1.3.6.1.4.1.1347.43.20.7.1.1
A unique value corresponding to each font data. The assignment may change in some case.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kcprtTypeFaceName 1.3.6.1.4.1.1347.43.20.7.1.2
The value will be NULL if no name has been assigned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

kcprtFontID 1.3.6.1.4.1.1347.43.20.7.1.3
This value will be -1 if no ID has been assigned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtFontType 1.3.6.1.4.1.1347.43.20.7.1.4
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER bitmap(0), scalable(1), others(255)  

kcprtFontLocation 1.3.6.1.4.1.1347.43.20.7.1.5
The value of kcprtMemoryDeviceIndex corresponding to the device on which this font is stored. If it is unknown, the value is -1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

kcprtFontAttribute 1.3.6.1.4.1.1347.43.20.7.1.6
In the current printer, this value is always 'registered'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notRegistered(0), registered(1)