L2TPV3-MIB

File: L2TPV3-MIB.mib (78681 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMP-FRAMEWORK-MIB
SNMPv2-CONF	IF-MIB

Imported symbols

MODULE-IDENTITY	NOTIFICATION-TYPE	OBJECT-TYPE
Counter32	Counter64	Gauge32
Integer32	Unsigned32	transmission
TEXTUAL-CONVENTION	DisplayString	RowStatus
TruthValue	SnmpAdminString	MODULE-COMPLIANCE
NOTIFICATION-GROUP	OBJECT-GROUP	InterfaceIndex

Defined Types

L2tpv3MilliSeconds
A period of time, measured in units of .001 seconds. When used in conjunction with the DISPLAY-HINT, shows seconds and fractions of a second with a resolution of .001 of a second.
TEXTUAL-CONVENTION
	Integer32	0..2147483646

L2tpv3TransportType
Supported L2TP transport types. Different transports may define MIB extensions to the L2TP control connection table to fully describe the transport layer. Objects of this type may be used to determine which MIB extensions to reference.
TEXTUAL-CONVENTION
	INTEGER	other(1), none(2), ipv4(3), udpIpv4(4), ipv6(5), udpIpv6(6), mpls(7), frameRelay(8), atm(9)

L2tpv3PWType
Supported L2TP pseudowire types.
TEXTUAL-CONVENTION
	INTEGER	frameRelay(1), atmAAL5(2), atmTransCell(3), ethernetVLAN(4), ethernet(5), hdlc(6), ppp(7), cem(8), atmVCCCell(9), atmVPCCell(10)

L2tpv3DataSequencing
L2TP data sequencing levels. A value of 'none' indicates that no received data packets require sequencing. A value of 'nonIP' indicates that only non-IP data packets require sequencing. A value of 'all' indicates that all received data packets require sequencing. The appropriate sequencing level is communicated to the peer via the Data Sequencing AVP.
TEXTUAL-CONVENTION
	INTEGER	none(0), nonIP(1), all(2)

L2tpv3CtrlCfgEntry
SEQUENCE
	l2tpv3CtrlCfgIfIndex	InterfaceIndex
	l2tpv3CtrlCfgRouterID	SnmpAdminString
	l2tpv3CtrlCfgTransport	L2tpv3TransportType
	l2tpv3CtrlCfgPWCap	OCTET STRING
	l2tpv3CtrlCfgFallback	TruthValue
	l2tpv3CtrlCfgDrain	TruthValue
	l2tpv3CtrlCfgAuth	INTEGER
	l2tpv3CtrlCfgSecret	SnmpAdminString
	l2tpv3CtrlCfgSecurity	INTEGER
	l2tpv3CtrlCfgHelloInt	Integer32
	l2tpv3CtrlCfgRWS	Integer32
	l2tpv3CtrlCfgMaxRetrans	Integer32
	l2tpv3CtrlCfgMaxRetransTO	Integer32
	l2tpv3CtrlCfgReassemblyTO	L2tpv3MilliSeconds
	l2tpv3CtrlCfgIdleTO	Integer32

L2tpv3CtrlStatsEntry
SEQUENCE
	l2tpv3CtrlStatsLocalID	Unsigned32
	l2tpv3CtrlStatsRemoteID	Unsigned32
	l2tpv3CtrlStatsRemoteRouterID	SnmpAdminString
	l2tpv3CtrlStatsState	INTEGER
	l2tpv3CtrlStatsIsDraining	TruthValue
	l2tpv3CtrlStatsInitiated	INTEGER
	l2tpv3CtrlStatsRemoteHostName	SnmpAdminString
	l2tpv3CtrlStatsRemoteVendorName	SnmpAdminString
	l2tpv3CtrlStatsRemoteVersion	OCTET STRING
	l2tpv3CtrlStatsRemotePWCap	OCTET STRING
	l2tpv3CtrlStatsInitialRemoteRWS	Integer32
	l2tpv3CtrlStatsCtrlRxZLB	Counter32
	l2tpv3CtrlStatsCtrlOutOfSeq	Counter32
	l2tpv3CtrlStatsCtrlOutOfWindow	Counter32
	l2tpv3CtrlStatsCtrlTxZLB	Counter32
	l2tpv3CtrlStatsCtrlAckTO	Counter32
	l2tpv3CtrlStatsCurrentRemoteRWS	Gauge32
	l2tpv3CtrlStatsTxSeq	Integer32
	l2tpv3CtrlStatsRxSeq	Integer32
	l2tpv3CtrlStatsNumSessCumEst	Counter32
	l2tpv3CtrlStatsNumSessCurrentEst	Gauge32
	l2tpv3CtrlStatsNumSessFailed	Counter32
	l2tpv3CtrlStatsLastResultCode	Integer32
	l2tpv3CtrlStatsLastErrorCode	Integer32
	l2tpv3CtrlStatsLastErrorMessage	SnmpAdminString
	l2tpv3CtrlStatsCtrlRxOctets	Counter32
	l2tpv3CtrlStatsCtrlRxPkts	Counter32
	l2tpv3CtrlStatsCtrlTxOctets	Counter32
	l2tpv3CtrlStatsCtrlTxPkts	Counter32
	l2tpv3CtrlStatsDataRxOctets	Counter32
	l2tpv3CtrlStatsDataRxPkts	Counter32
	l2tpv3CtrlStatsDataRxDrops	Counter32
	l2tpv3CtrlStatsDataTxOctets	Counter32
	l2tpv3CtrlStatsDataTxPkts	Counter32
	l2tpv3CtrlStatsCtrlHCRxOctets	Counter64
	l2tpv3CtrlStatsCtrlHCRxPkts	Counter64
	l2tpv3CtrlStatsCtrlHCTxOctets	Counter64
	l2tpv3CtrlStatsCtrlHCTxPkts	Counter64
	l2tpv3CtrlStatsDataHCRxOctets	Counter64
	l2tpv3CtrlStatsDataHCRxPkts	Counter64
	l2tpv3CtrlStatsDataHCRxDrops	Counter64
	l2tpv3CtrlStatsDataHCTxOctets	Counter64
	l2tpv3CtrlStatsDataHCTxPkts	Counter64

L2tpv3CtrlMapEntry
SEQUENCE
	l2tpv3CtrlMapLocalID	Unsigned32
	l2tpv3CtrlMapIfIndex	InterfaceIndex

L2tpv3SessionCfgEntry
SEQUENCE
	l2tpv3SessionCfgIfIndex	InterfaceIndex
	l2tpv3SessionCfgLocalID	Unsigned32
	l2tpv3SessionCfgRemoteID	Unsigned32
	l2tpv3SessionCfgCtrlLocalID	Unsigned32
	l2tpv3SessionCfgPWType	L2tpv3PWType
	l2tpv3SessionCfgEndID	DisplayString
	l2tpv3SessionCfgAppID	DisplayString
	l2tpv3SessionCfgPWEncap	INTEGER
	l2tpv3SessionCfgSeq	L2tpv3DataSequencing
	l2tpv3SessionCfgLocalCookie	DisplayString
	l2tpv3SessionCfgRemoteCookie	DisplayString
	l2tpv3SessionCfgCallType	INTEGER

L2tpv3SessionStatsEntry
SEQUENCE
	l2tpv3SessionStatsRemoteEndID	DisplayString
	l2tpv3SessionStatsRemoteAppID	DisplayString
	l2tpv3SessionStatsRemotePWEncap	INTEGER
	l2tpv3SessionStatsRemoteSeq	L2tpv3DataSequencing
	l2tpv3SessionStatsState	INTEGER
	l2tpv3SessionStatsCircuitStatus	Unsigned32
	l2tpv3SessionStatsSerialNumber	Unsigned32
	l2tpv3SessionStatsRxConnectSpeed	Unsigned32
	l2tpv3SessionStatsTxConnectSpeed	Unsigned32
	l2tpv3SessionStatsPhysChannelID	Unsigned32
	l2tpv3SessionStatsPrivateGroupID	SnmpAdminString
	l2tpv3SessionStatsOutOfSeq	Counter32
	l2tpv3SessionStatsReassemblyTO	Counter32
	l2tpv3SessionStatsTxSeq	Counter32
	l2tpv3SessionStatsRxSeq	Counter32
	l2tpv3SessionStatsRxOctets	Counter32
	l2tpv3SessionStatsRxPkts	Counter32
	l2tpv3SessionStatsRxDrops	Counter32
	l2tpv3SessionStatsTxOctets	Counter32
	l2tpv3SessionStatsTxPkts	Counter32
	l2tpv3SessionStatsHCRxOctets	Counter64
	l2tpv3SessionStatsHCRxPkts	Counter64
	l2tpv3SessionStatsHCRxDrops	Counter64
	l2tpv3SessionStatsHCTxOctets	Counter64
	l2tpv3SessionStatsHCTxPkts	Counter64

L2tpv3SessionMapEntry
SEQUENCE
	l2tpv3SessionMapIfIndex	InterfaceIndex
	l2tpv3SessionMapCtrlIfIndex	InterfaceIndex
	l2tpv3SessionMapLocalID	Unsigned32
	l2tpv3SessionMapStatus	RowStatus

Defined Values

l2tpv3		1.3.6.1.2.1.10.1
The MIB module that describes managed objects of general use by the Layer Two Tunneling Protocol, Version 3 (L2TPv3).
MODULE-IDENTITY

l2tpv3Notifications		1.3.6.1.2.1.10.1.0
OBJECT IDENTIFIER

l2tpv3Objects		1.3.6.1.2.1.10.1.1
OBJECT IDENTIFIER

l2tpv3Conformance		1.3.6.1.2.1.10.1.2
OBJECT IDENTIFIER

l2tpv3StackCfg		1.3.6.1.2.1.10.1.1.1
OBJECT IDENTIFIER

l2tpv3StackCfgAdminState		1.3.6.1.2.1.10.1.1.1.1
The administrative state of the L2TP stack. Setting this object to 'disabled' causes all control connections to be immediately disconnected. After this point, no further control connections or session may be initiated or accepted. The value of this object must be maintained in non-volatile memory.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

l2tpv3StackCfgDrain		1.3.6.1.2.1.10.1.1.1.2
Setting this object to 'true' prevents any new control connections and/or sessions from being initiated or accepted. However, it does not disconnect any active control connections and/or sessions. The 'l2tpv3StackStatsIsDraining' object and the 'l2tpv3CtrlStatsIsDraining' object of each control connection is set to 'true'. To cancel a drain, this object is set to 'false'. The value of this object must be maintained in non-volatile memory.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

l2tpv3StackStats		1.3.6.1.2.1.10.1.1.2
OBJECT IDENTIFIER

l2tpv3StackStatsVersion		1.3.6.1.2.1.10.1.1.2.1
The highest protocol version number supported by this L2TP stack.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

l2tpv3StackStatsRevision		1.3.6.1.2.1.10.1.1.2.2
The revision number of the L2TP stack.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

l2tpv3StackStatsVendorName		1.3.6.1.2.1.10.1.1.2.3
The vendor name of the L2TP stack.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

l2tpv3StackStatsAdminState		1.3.6.1.2.1.10.1.1.2.4
The administrative state of the L2TP stack. It reflects the value of the l2tpv3StackCfgAdminState object.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

l2tpv3StackStatsIsDraining		1.3.6.1.2.1.10.1.1.2.5
Indicates whether the L2TP stack is draining sessions from all control connections.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

l2tpv3StackStatsNumCtrlEst		1.3.6.1.2.1.10.1.1.2.6
The total number of control connections that are currently established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3StackStatsNumSessEst		1.3.6.1.2.1.10.1.1.2.7
The total number of sessions that are currently established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlCfgTable		1.3.6.1.2.1.10.1.1.3
Table used to (re)configure the operational characteristics of a single L2TP control connection. There is a 1:1 correspondence between conceptual rows of this table and conceptual rows of the l2tpv3CtrlStatsTable. Entries in this table have the same persistency characteristics as that of the l2tpv3CtrlStatsTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tpv3CtrlCfgEntry

l2tpv3CtrlCfgEntry		1.3.6.1.2.1.10.1.1.3.1
An L2TP control connection configuration entry. Entries in this table are added and deleted as a result of protocol interactions or management operations. The latter occurs when a row is instantiated in the l2tpv3CtrlCfgTable row and the encapsulation method is 'l2tp'.
Status: current	Access: not-accessible
OBJECT-TYPE
	L2tpv3CtrlCfgEntry

l2tpv3CtrlCfgIfIndex		1.3.6.1.2.1.10.1.1.3.1.1
Value equal to the ifIndex value of the Interfaces Group MIB for an interface of type L2TP.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

l2tpv3CtrlCfgRouterID		1.3.6.1.2.1.10.1.1.3.1.2
The local router ID of this peer, as communicated via the Router ID AVP for this control connection.
Status: current	Access: read-write
OBJECT-TYPE
	SnmpAdminString

l2tpv3CtrlCfgTransport		1.3.6.1.2.1.10.1.1.3.1.3
The transport type of this control connection entry. This object cannot be modified when the control connection is in a connecting or connected state.
Status: current	Access: read-write
OBJECT-TYPE
	L2tpv3TransportType

l2tpv3CtrlCfgPWCap		1.3.6.1.2.1.10.1.1.3.1.4
The pseudowire capabilities of this control connection entry. Each octet must be a value within the range specified by the L2tpv3PWType textual convention.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..256)

l2tpv3CtrlCfgFallback		1.3.6.1.2.1.10.1.1.3.1.5
Indicates whether fallback to older versions of L2TP is enabled during control connection establishment.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

l2tpv3CtrlCfgDrain		1.3.6.1.2.1.10.1.1.3.1.6
Setting this object to 'true' prevents any new sessions from being either initiated or accepted by this control connection. However, it does not disconnect any active sessions for this control connection. The 'l2tpv3CtrlStatsIsDraining' object for this control connection is set to 'true'. To cancel a drain, this object is set to 'false'. This object may be overridden by the global 'l2tpv3StackCfgDrain' object, which globally applies drain settings to all control connections.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

l2tpv3CtrlCfgAuth		1.3.6.1.2.1.10.1.1.3.1.7
Describes how a pair of LCCEs are to be authenticated. The value 'simple' indicates that peers are authenticated by their host name as described in the Host Name AVP. The value 'challenge' indicates that all peers are challenged to prove their identification. This object cannot be modified when the control connection is in a connecting or connected state.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), simple(2), challenge(3)

l2tpv3CtrlCfgSecret		1.3.6.1.2.1.10.1.1.3.1.8
The shared secret used during the authentication phase of control connection establishment. This object cannot be modified when the control connection is in a connecting or connected state. This object MUST be accessible only via requests using both authentication and privacy. The agent MUST report an empty string in response to get, get-next, and get-bulk requests.
Status: current	Access: read-write
OBJECT-TYPE
	SnmpAdminString	Size(0..255)

l2tpv3CtrlCfgSecurity		1.3.6.1.2.1.10.1.1.3.1.9
Sets whether this control connection is to be secured. The value of 'ipsec' indicates that all control packets have IPsec headers. The types of IPsec headers (e.g. AH, ESP, etc.) and their usage are outside the scope of this document. This object cannot be modified when the control connection is in a connecting or connected state.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), other(2), ipsec(3)

l2tpv3CtrlCfgHelloInt		1.3.6.1.2.1.10.1.1.3.1.10
The interval in which Hello (keepalive) packets are sent by a local peer. The value zero effectively disables the sending of Hello packets. Modifications to this object have immediate effect.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..3600

l2tpv3CtrlCfgRWS		1.3.6.1.2.1.10.1.1.3.1.11
The control packet receive window size. It specifies the maximum number of control packets an LCCE can send for the control connection without waiting for an acknowledgement from the peer. This object cannot be modified when the control connection is in a connecting or connected state.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65535

l2tpv3CtrlCfgMaxRetrans		1.3.6.1.2.1.10.1.1.3.1.12
The number of control packet retransmissions that the L2TP stack attempts for this control connection before assuming that the peer is no longer responding. A value of zero indicates that this peer does not attempt to retransmit an unacknowledged control packet. Modifications to this object have immediate effect.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..32

l2tpv3CtrlCfgMaxRetransTO		1.3.6.1.2.1.10.1.1.3.1.13
The maximum retransmission timeout interval that the control connection waits before retransmitting an unacknowledged control packet. Modifications to this object have immediate effect.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..32

l2tpv3CtrlCfgReassemblyTO		1.3.6.1.2.1.10.1.1.3.1.14
The number of milliseconds that this control connection waits before processing data packets that were received out of sequence (and that are being held for processing in sequence). A low value increases the chance of delayed packets being discarded, while a high value may cause more queueing and possibly degrade throughput if packets are truly lost. The default value for this object is zero, which means that delayed packets are considered lost, and received packets are processed in increasing order, despite any sequence number gaps.
Status: current	Access: read-write
OBJECT-TYPE
	L2tpv3MilliSeconds

l2tpv3CtrlCfgIdleTO		1.3.6.1.2.1.10.1.1.3.1.15
The period of time that an established control connection with no sessions waits before disconnecting the control connection. A value of zero indicates that the control connection disconnects immediately after the last session disconnects. A value of -1 leaves the control connection up indefinitely. Modifications to this object have immediate effect.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-1..86400

l2tpv3CtrlStatsTable		1.3.6.1.2.1.10.1.1.4
Table describing the current status and statistics of a single L2TP control connection. There is a 1:1 correspondence between conceptual rows of this table and conceptual rows of the l2tpv3CtrlCfgTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tpv3CtrlStatsEntry

l2tpv3CtrlStatsEntry		1.3.6.1.2.1.10.1.1.4.1
An L2TP control connection interface statistics entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	L2tpv3CtrlStatsEntry

l2tpv3CtrlStatsLocalID		1.3.6.1.2.1.10.1.1.4.1.1
The local control connection ID.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

l2tpv3CtrlStatsRemoteID		1.3.6.1.2.1.10.1.1.4.1.2
The remote control connection ID.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

l2tpv3CtrlStatsRemoteRouterID		1.3.6.1.2.1.10.1.1.4.1.3
The remote router ID for this control connection, as communicated by the peer via the Router ID AVP.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

l2tpv3CtrlStatsState		1.3.6.1.2.1.10.1.1.4.1.4
The current state of the control connection.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ctrlIdle(1), ctrlConnecting(2), ctrlEstablished(3), ctrlDisconnecting(4)

l2tpv3CtrlStatsIsDraining		1.3.6.1.2.1.10.1.1.4.1.5
Indicates whether the control connection is draining sessions. This object is set to 'true' if either 'l2tpv3StackCfgDrain' or 'l2tpv3CtrlCfgDrain' is set to 'true', and is only set to 'false' if both configuration objects are 'false'.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

l2tpv3CtrlStatsInitiated		1.3.6.1.2.1.10.1.1.4.1.6
Indicates whether the control connection was initiated locally or remotely.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	locally(1), remotely(2)

l2tpv3CtrlStatsRemoteHostName		1.3.6.1.2.1.10.1.1.4.1.7
The peer's host name as discovered during the control connection establishment (via the Host Name AVP). If the control connection is idle, this object should maintain its value from the last time it was connected.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

l2tpv3CtrlStatsRemoteVendorName		1.3.6.1.2.1.10.1.1.4.1.8
The vendor name of the peer. If the control connection is idle, this object should maintain its value from the last time it was connected.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

l2tpv3CtrlStatsRemotePWCap		1.3.6.1.2.1.10.1.1.4.1.9
The peer's pseudowire capabilities for this control connection. Each octet must be a value within the range specified by the L2tpv3PWType textual convention.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..256)

l2tpv3CtrlStatsRemoteVersion		1.3.6.1.2.1.10.1.1.4.1.10
The peer implementation's protocol version number and revision number. The first octet contains the protocol version number. The second octet contains the protocol revision number.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

l2tpv3CtrlStatsInitialRemoteRWS		1.3.6.1.2.1.10.1.1.4.1.11
The peer's receive window size as conveyed during control connection establishment (via the Remote Window Size AVP). If the control connection is idle, this object should maintain its value from the last time it was connected.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

l2tpv3CtrlStatsCtrlRxZLB		1.3.6.1.2.1.10.1.1.4.1.12
The number of Zero-Length-Body (acknowledgement) control packets that have been received on the control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsCtrlOutOfSeq		1.3.6.1.2.1.10.1.1.4.1.13
The number of control packets that have been received out of order (per the sequence numbers) on this control connection, including out of window packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsCtrlOutOfWindow		1.3.6.1.2.1.10.1.1.4.1.14
The number of control packets that have been received outside of the offered receive window for the control connection. Whether these packets are queued or discarded is implementation-specific.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsCtrlTxZLB		1.3.6.1.2.1.10.1.1.4.1.15
The number of Zero-Length-Body (acknowledgement) control packets that have been sent to the peer for this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsCtrlAckTO		1.3.6.1.2.1.10.1.1.4.1.16
The number of control packet timeouts due to late acknowledgements from the peer for this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsCurrentRemoteRWS		1.3.6.1.2.1.10.1.1.4.1.17
The current remote receive window size as determined by the local flow control mechanism employed.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32	0..65535

l2tpv3CtrlStatsTxSeq		1.3.6.1.2.1.10.1.1.4.1.18
The next send (Ns) sequence number for the control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

l2tpv3CtrlStatsRxSeq		1.3.6.1.2.1.10.1.1.4.1.19
The next receive (Nr) sequence number for the control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

l2tpv3CtrlStatsNumSessCumEst		1.3.6.1.2.1.10.1.1.4.1.20
The cumulative number of sessions that this control connection has established during its lifetime.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsNumSessCurrentEst		1.3.6.1.2.1.10.1.1.4.1.21
The number of sessions currently in the established state for this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

l2tpv3CtrlStatsNumSessFailed		1.3.6.1.2.1.10.1.1.4.1.22
The total number of sessions that were negotiated but failed to be established by this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsLastResultCode		1.3.6.1.2.1.10.1.1.4.1.23
The result code as conveyed by the Result Code AVP from the most recent session to be torn down.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

l2tpv3CtrlStatsLastErrorCode		1.3.6.1.2.1.10.1.1.4.1.24
The error code as conveyed by the Result Code AVP from the most recent session to be torn down.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

l2tpv3CtrlStatsLastErrorMessage		1.3.6.1.2.1.10.1.1.4.1.25
The optional message as conveyed by the Result Code AVP from the most recent session to be torn down.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

l2tpv3CtrlStatsCtrlRxOctets		1.3.6.1.2.1.10.1.1.4.1.26
The number of control octets that have been received by this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsCtrlRxPkts		1.3.6.1.2.1.10.1.1.4.1.27
The number of control packets that have been received by this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsCtrlTxOctets		1.3.6.1.2.1.10.1.1.4.1.28
The number of control octets that have been sent by this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsCtrlTxPkts		1.3.6.1.2.1.10.1.1.4.1.29
The number of control packets that have been sent by this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsDataRxOctets		1.3.6.1.2.1.10.1.1.4.1.30
The number of data octets that have been received by sessions negotiated by this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsDataRxPkts		1.3.6.1.2.1.10.1.1.4.1.31
The number of data packets that have been received by sessions negotiated by this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsDataRxDrops		1.3.6.1.2.1.10.1.1.4.1.32
The number of received data packets that have been dropped by sessions negotiated by this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsDataTxOctets		1.3.6.1.2.1.10.1.1.4.1.33
The number of data octets that have been sent by sessions negotiated by this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsDataTxPkts		1.3.6.1.2.1.10.1.1.4.1.34
The number of data packets that have been sent by sessions negotiated by this control connection.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3CtrlStatsCtrlHCRxOctets		1.3.6.1.2.1.10.1.1.4.1.35
The 64-bit version of l2tpv3CtrlStatsCtrlRxOctets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3CtrlStatsCtrlHCRxPkts		1.3.6.1.2.1.10.1.1.4.1.36
The 64-bit version of l2tpv3CtrlStatsCtrlRxPkts.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3CtrlStatsCtrlHCTxOctets		1.3.6.1.2.1.10.1.1.4.1.37
The 64-bit version of l2tpv3CtrlStatsCtrlTxOctets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3CtrlStatsCtrlHCTxPkts		1.3.6.1.2.1.10.1.1.4.1.38
The 64-bit version of l2tpv3CtrlStatsCtrlTxPkts.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3CtrlStatsDataHCRxOctets		1.3.6.1.2.1.10.1.1.4.1.39
The 64-bit version of l2tpv3CtrlStatsDataRxOctets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3CtrlStatsDataHCRxPkts		1.3.6.1.2.1.10.1.1.4.1.40
The 64-bit version of l2tpv3CtrlStatsDataRxPkts.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3CtrlStatsDataHCRxDrops		1.3.6.1.2.1.10.1.1.4.1.41
The 64-bit version of l2tpv3CtrlStatsDataRxDrops.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3CtrlStatsDataHCTxOctets		1.3.6.1.2.1.10.1.1.4.1.42
The 64-bit version of l2tpv3CtrlStatsDataTxOctets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3CtrlStatsDataHCTxPkts		1.3.6.1.2.1.10.1.1.4.1.43
The 64-bit version of l2tpv3CtrlStatsDataTxPkts.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3CtrlMapTable		1.3.6.1.2.1.10.1.1.5
Table intended to assist management applications to quickly determine the ifIndex value for a given local control connection ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tpv3CtrlMapEntry

l2tpv3CtrlMapEntry		1.3.6.1.2.1.10.1.1.5.1
An L2TP control connection index map entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	L2tpv3CtrlMapEntry

l2tpv3CtrlMapLocalID		1.3.6.1.2.1.10.1.1.5.1.1
The local control connection ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

l2tpv3CtrlMapIfIndex		1.3.6.1.2.1.10.1.1.5.1.2
The ifIndex value of a control connection interface, represented in the Interfaces Group MIB as an entry with an interface type of L2TP.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

l2tpv3SessionCfgTable		1.3.6.1.2.1.10.1.1.6
Table used to (re)configure the operational characteristics of a single L2TP session. There is a 1:1 correspondence between conceptual rows of this table and conceptual rows of the l2tpv3SessionStatsTable. Entries in this table have the same persistency characteristics as that of the l2tpv3SessionStatsTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tpv3SessionCfgEntry

l2tpv3SessionCfgEntry		1.3.6.1.2.1.10.1.1.6.1
An L2TP session configuration entry. Entries in this table are added and deleted as a result of protocol interactions or management operations.
Status: current	Access: not-accessible
OBJECT-TYPE
	L2tpv3SessionCfgEntry

l2tpv3SessionCfgIfIndex		1.3.6.1.2.1.10.1.1.6.1.1
The ifIndex value of the interface from which L2 frames are being forwarded. For example, the ifIndex could be a DS0 on an LAC or a virtual PPP interface on an LNS.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

l2tpv3SessionCfgLocalID		1.3.6.1.2.1.10.1.1.6.1.2
Sets the local session ID.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

l2tpv3SessionCfgRemoteID		1.3.6.1.2.1.10.1.1.6.1.3
Sets the remote session ID.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

l2tpv3SessionCfgCtrlLocalID		1.3.6.1.2.1.10.1.1.6.1.4
Sets the local control connection ID of the control connection with which this session may be associated. If the session is not associated with a control connection, the value of this object is 0.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32

l2tpv3SessionCfgPWType		1.3.6.1.2.1.10.1.1.6.1.5
Sets the pseudowire type of the session, which is sent to the peer via the Pseudowire Type AVP.
Status: current	Access: read-create
OBJECT-TYPE
	L2tpv3PWType

l2tpv3SessionCfgEndID		1.3.6.1.2.1.10.1.1.6.1.6
Sets the End Identifier that is sent to the peer via the End ID AVP.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..255)

l2tpv3SessionCfgAppID		1.3.6.1.2.1.10.1.1.6.1.7
Sets the Application Code and Application Info that are sent to the peer via the Application ID AVP.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..255)

l2tpv3SessionCfgPWEncap		1.3.6.1.2.1.10.1.1.6.1.8
Sets the Control Encapsulation Type that is sent to the peer via the Pseudowire Control Encapsulation AVP.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(0), default(1)

l2tpv3SessionCfgSeq		1.3.6.1.2.1.10.1.1.6.1.9
Sets the Data Sequencing Level that is required of the peer. Sent to the peer via the Data Sequencing AVP.
Status: current	Access: read-create
OBJECT-TYPE
	L2tpv3DataSequencing

l2tpv3SessionCfgLocalCookie		1.3.6.1.2.1.10.1.1.6.1.10
Sets the local cookie that is included in outgoing data packets.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..8)

l2tpv3SessionCfgRemoteCookie		1.3.6.1.2.1.10.1.1.6.1.11
Sets the remote cookie that is expected in incoming data packets.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..8)

l2tpv3SessionCfgCallType		1.3.6.1.2.1.10.1.1.6.1.12
The role this LCCE is playing for this session. For example, 'lacInitiator' indicates that this control connection peer is acting as an LAC and generated an call request (ICRQ or OCRQ) to its peer.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	lacInitiator(1), lacResponder(2), lnsInitiator(3), lnsResponder(4)

l2tpv3SessionStatsTable		1.3.6.1.2.1.10.1.1.7
Table that describes the current status and statistics of a single L2TP session.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tpv3SessionStatsEntry

l2tpv3SessionStatsEntry		1.3.6.1.2.1.10.1.1.7.1
An L2TP session interface statistics entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	L2tpv3SessionStatsEntry

l2tpv3SessionStatsRemoteEndID		1.3.6.1.2.1.10.1.1.7.1.1
The peer's End Identifier, as communicated via the End ID AVP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

l2tpv3SessionStatsRemoteAppID		1.3.6.1.2.1.10.1.1.7.1.2
The peer's Application Code and Application Info, as communicated via the Application ID AVP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

l2tpv3SessionStatsRemotePWEncap		1.3.6.1.2.1.10.1.1.7.1.3
The peer's Control Encapsulation Type, as communicated via the Pseudowire Control Encapsulation AVP.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), default(1)

l2tpv3SessionStatsRemoteSeq		1.3.6.1.2.1.10.1.1.7.1.4
The peer's Data Sequencing Level, as communicated via the Data Sequencing AVP.
Status: current	Access: read-create
OBJECT-TYPE
	L2tpv3DataSequencing

l2tpv3SessionStatsState		1.3.6.1.2.1.10.1.1.7.1.5
The current state of the session.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sessionIdle(1), sessionConnecting(2), sessionEstablished(3), sessionDisconnecting(4)

l2tpv3SessionStatsCircuitStatus		1.3.6.1.2.1.10.1.1.7.1.6
The current status of the circuit forwarded by the session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

l2tpv3SessionStatsSerialNumber		1.3.6.1.2.1.10.1.1.7.1.7
The serial number that has been assigned to this session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

l2tpv3SessionStatsRxConnectSpeed		1.3.6.1.2.1.10.1.1.7.1.8
The last known receive baud rate for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

l2tpv3SessionStatsTxConnectSpeed		1.3.6.1.2.1.10.1.1.7.1.9
The last known transmit baud rate for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

l2tpv3SessionStatsPhysChannelID		1.3.6.1.2.1.10.1.1.7.1.10
The physical channel identifier for the session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

l2tpv3SessionStatsPrivateGroupID		1.3.6.1.2.1.10.1.1.7.1.11
The private group ID used for this L2TP session. If no private group ID is found, then a null string is returned.
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString

l2tpv3SessionStatsOutOfSeq		1.3.6.1.2.1.10.1.1.7.1.12
The total number of data packets received out of sequence for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3SessionStatsReassemblyTO		1.3.6.1.2.1.10.1.1.7.1.13
The number of reassembly timeouts that have occurred for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3SessionStatsTxSeq		1.3.6.1.2.1.10.1.1.7.1.14
The current sequence number for outgoing data packets for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3SessionStatsRxSeq		1.3.6.1.2.1.10.1.1.7.1.15
The current sequence number for incoming data packets for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3SessionStatsRxOctets		1.3.6.1.2.1.10.1.1.7.1.16
The number of data octets that have been received by this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3SessionStatsRxPkts		1.3.6.1.2.1.10.1.1.7.1.17
The number of data packets that have been received by this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3SessionStatsRxDrops		1.3.6.1.2.1.10.1.1.7.1.18
The number of received data packets that have been dropped by this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3SessionStatsTxOctets		1.3.6.1.2.1.10.1.1.7.1.19
The number of data octets that have been sent by this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3SessionStatsTxPkts		1.3.6.1.2.1.10.1.1.7.1.20
The number of data packets that have been sent by this session.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

l2tpv3SessionStatsHCRxOctets		1.3.6.1.2.1.10.1.1.7.1.21
The 64-bit version of l2tpv3SessionStatsRxOctets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3SessionStatsHCRxPkts		1.3.6.1.2.1.10.1.1.7.1.22
The 64-bit version of l2tpv3SessionStatsRxPkts.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3SessionStatsHCRxDrops		1.3.6.1.2.1.10.1.1.7.1.23
The 64-bit version of l2tpv3SessionStatsRxDrops.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3SessionStatsHCTxOctets		1.3.6.1.2.1.10.1.1.7.1.24
The 64-bit version of l2tpv3SessionStatsTxOctets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3SessionStatsHCTxPkts		1.3.6.1.2.1.10.1.1.7.1.25
The 64-bit version of l2tpv3SessionStatsTxPkts.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

l2tpv3SessionMapTable		1.3.6.1.2.1.10.1.1.8
Table intended to assist management applications to map interfaces to control connection and session IDs.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		L2tpv3SessionMapEntry

l2tpv3SessionMapEntry		1.3.6.1.2.1.10.1.1.8.1
An L2TP session index map entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	L2tpv3SessionMapEntry

l2tpv3SessionMapIfIndex		1.3.6.1.2.1.10.1.1.8.1.1
The ifIndex value of the interface being forwarded via an L2TP session. For example, the interface could be an Ethernet interface on an LAC or a virtual PPP interface on the LNS.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

l2tpv3SessionMapCtrlIfIndex		1.3.6.1.2.1.10.1.1.8.1.2
The ifIndex value of the session's control connection. The object establishes a binding between a particular interface identified by l2tpv3SessionMapIfIndex to a particular control connection.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndex

l2tpv3SessionMapLocalID		1.3.6.1.2.1.10.1.1.8.1.3
The local session ID for this session.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

l2tpv3SessionMapStatus		1.3.6.1.2.1.10.1.1.8.1.4
The status of this session map entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

l2tpv3CtrlAuthFailure		1.3.6.1.2.1.10.1.0.1
Trap signifying that an attempt to establish a control connection to a remote peer has failed authentication.
Status: current	Access: read-create
NOTIFICATION-TYPE

l2tpv3Groups		1.3.6.1.2.1.10.1.2.1
OBJECT IDENTIFIER

l2tpv3Compliances		1.3.6.1.2.1.10.1.2.2
OBJECT IDENTIFIER

l2tpv3MIBFullCompliance		1.3.6.1.2.1.10.1.2.2.1
An implementation claims full compliance when this MIB is implemented with support for read-create and read- write operations, thereby allowing configuration and monitoring, respectively.
Status: current	Access: read-create
MODULE-COMPLIANCE

l2tpv3MIBReadOnlyCompliance		1.3.6.1.2.1.10.1.2.2.2
An implementation claims read-only compliance when this MIB is implemented without support for read-create and read-write operations (i.e. operates in read-only mode), thereby allowing monitoring but not configuration.
Status: current	Access: read-only
MODULE-COMPLIANCE

l2tpv3CfgGroup		1.3.6.1.2.1.10.1.2.1.1
A collection of objects providing configuration information of the L2TP stack, its control connections, and its sessions.
Status: current	Access: read-only
OBJECT-GROUP

l2tpv3StatsGroup		1.3.6.1.2.1.10.1.2.1.2
A collection of objects providing status and statistics of the L2TP stack, its control connections, and its sessions.
Status: current	Access: read-only
OBJECT-GROUP

l2tpv3MappingGroup		1.3.6.1.2.1.10.1.2.1.3
A collection of objects providing index mapping.
Status: current	Access: read-only
OBJECT-GROUP

l2tpv3SecurityGroup		1.3.6.1.2.1.10.1.2.1.4
A collection of objects providing L2TP security configuration.
Status: current	Access: read-only
OBJECT-GROUP

l2tpv3TrapGroup		1.3.6.1.2.1.10.1.2.1.5
A collection of L2TP trap events as specified in NOTIFICATION-TYPE constructs.
Status: current	Access: read-only
NOTIFICATION-GROUP

l2tpv3HCPacketGroup		1.3.6.1.2.1.10.1.2.1.6
A collection of objects providing high-capacity 64-bit counter objects.
Status: current	Access: read-only
OBJECT-GROUP