LBHUB-RBLC-MIB
File:
LBHUB-RBLC-MIB.mib (47403 bytes)
Imported modules
Imported symbols
Defined Types
AccessGroupEntry |
|
SEQUENCE |
|
|
|
|
accessGroupAddr |
OCTET STRING |
Size(6) |
|
accessGroupInUse |
INTEGER |
|
|
accessGroupNon |
INTEGER |
|
|
accessGroupFree |
INTEGER |
|
|
accessGroupMgmt |
INTEGER |
|
|
accessGroupN1 |
INTEGER |
|
|
accessGroupN2 |
INTEGER |
|
|
accessGroupN3 |
INTEGER |
|
|
accessGroupN4 |
INTEGER |
|
|
accessGroupN5 |
INTEGER |
|
|
accessGroupN6 |
INTEGER |
|
|
accessGroupN7 |
INTEGER |
|
|
accessGroupN8 |
INTEGER |
|
|
accessGroupN9 |
INTEGER |
|
|
accessGroupN10 |
INTEGER |
|
|
accessGroupN11 |
INTEGER |
|
|
accessGroupN12 |
INTEGER |
|
|
accessGroupN13 |
INTEGER |
|
|
accessGroupN14 |
INTEGER |
|
|
accessGroupN15 |
INTEGER |
|
|
accessGroupN16 |
INTEGER |
|
|
accessGroupMembers |
INTEGER |
|
AccessGroupNamedIdEntry |
|
SEQUENCE |
|
|
|
|
accessGroupNamedIdIndex |
INTEGER |
|
|
accessGroupNamedIdIdentifier |
OCTET STRING |
Size(20) |
PcolEntry |
|
SEQUENCE |
|
|
|
|
pcolIndex |
INTEGER |
|
|
pcolInUse |
INTEGER |
|
|
pcolState |
INTEGER |
|
|
pcolIdentifier |
OCTET STRING |
Size(16) |
|
pcolOffset |
INTEGER |
|
|
pcolMask |
OCTET STRING |
Size(8) |
|
pcolMatch |
OCTET STRING |
Size(8) |
|
pcolDecision |
INTEGER |
|
|
pcolAction |
INTEGER |
|
BrgMgmtEntry |
|
SEQUENCE |
|
|
|
|
brgMgmtAddr |
IpAddress |
|
|
brgMgmtName |
OCTET STRING |
|
DynEntry |
|
SEQUENCE |
|
|
|
|
dynAddr |
OCTET STRING |
Size(6) |
|
dynHomePort |
INTEGER |
|
|
dynInUse |
INTEGER |
|
TypeFltrEntry |
|
SEQUENCE |
|
|
|
|
typeFltrFrom |
INTEGER |
|
|
typeFltrTo |
INTEGER |
|
|
typeFltrInUse |
INTEGER |
|
SupportedEntry |
|
SEQUENCE |
|
|
|
|
supportedIndex |
INTEGER |
|
|
supportedID |
OBJECT IDENTIFIER |
|
UnSupportedEntry |
|
SEQUENCE |
|
|
|
|
unSupportedIndex |
INTEGER |
|
|
unSupportedID |
OBJECT IDENTIFIER |
|
TrapCountEntry |
|
SEQUENCE |
|
|
|
|
trapCountIndex |
INTEGER |
|
|
trapCountType |
INTEGER |
|
|
trapCountCode |
INTEGER |
|
|
trapCountEnable |
INTEGER |
|
|
trapCountCount |
Counter |
|
|
trapCountTime |
TimeTicks |
|
|
trapCountDescr |
DisplayString |
|
TrapDestsEntry |
|
SEQUENCE |
|
|
|
|
trapDestsIpAddr |
IpAddress |
|
|
trapDestsSerialAddr |
IpAddress |
|
|
trapDestsPhoneNumber |
OCTET STRING |
|
|
trapDestsSendTo |
INTEGER |
|
|
trapDestsEnable |
INTEGER |
|
|
trapDestsCommunityName |
OCTET STRING |
|
|
trapDestsInUse |
INTEGER |
|
SipNxtBootEntry |
|
SEQUENCE |
|
|
|
|
sipNxtBootCurIp |
IpAddress |
|
|
sipNxtBootNxtIp |
IpAddress |
|
|
sipNxtBootBbdCast |
INTEGER |
|
|
sipNxtBootSubnetMask |
IpAddress |
|
Defined Values
mib-2 |
1.3.6.1.2.1 |
OBJECT IDENTIFIER |
|
|
|
system |
1.3.6.1.2.1.1 |
OBJECT IDENTIFIER |
|
|
|
at |
1.3.6.1.2.1.3 |
OBJECT IDENTIFIER |
|
|
|
ip |
1.3.6.1.2.1.4 |
OBJECT IDENTIFIER |
|
|
|
icmp |
1.3.6.1.2.1.5 |
OBJECT IDENTIFIER |
|
|
|
tcp |
1.3.6.1.2.1.6 |
OBJECT IDENTIFIER |
|
|
|
udp |
1.3.6.1.2.1.7 |
OBJECT IDENTIFIER |
|
|
|
bicctech |
1.3.6.1.4.1.170 |
OBJECT IDENTIFIER |
|
|
|
bdn |
1.3.6.1.4.1.170.1 |
OBJECT IDENTIFIER |
|
|
|
bdnII |
1.3.6.1.4.1.170.1.1 |
OBJECT IDENTIFIER |
|
|
|
spiderII |
1.3.6.1.4.1.170.1.1.3 |
OBJECT IDENTIFIER |
|
|
|
spProduct |
1.3.6.1.4.1.170.1.1.3.1 |
OBJECT IDENTIFIER |
|
|
|
spIndex |
1.3.6.1.4.1.170.1.1.3.2 |
OBJECT IDENTIFIER |
|
|
|
spGeneral |
1.3.6.1.4.1.170.1.1.3.3 |
OBJECT IDENTIFIER |
|
|
|
spSnmp |
1.3.6.1.4.1.170.1.1.3.4 |
OBJECT IDENTIFIER |
|
|
|
bridge |
1.3.6.1.4.1.170.1.1.3.1.1 |
OBJECT IDENTIFIER |
|
|
|
bridgeID |
1.3.6.1.4.1.170.1.1.3.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
bridgeData |
1.3.6.1.4.1.170.1.1.3.1.1.2 |
OBJECT IDENTIFIER |
|
|
|
r285 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3 |
OBJECT IDENTIFIER |
|
|
|
broadcastFltr |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.1 |
The state of broadcast filtering. If this object is
set to ON then the bridge will not forward frames with
the ethernet broadcast address. The bridge itself
will still be able to receive frames with the ethernet
broadcast address, e.g. ARP requests. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), on(2) |
|
accessGroupChecking |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.2 |
The state of Access Group Checking. If this object is
ON, then each frame is subject to Access Group
Checking. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), on(2) |
|
accessGroupLearning |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.3 |
This object determines whether learned addresses
belong to the Non Access Group or the Free Access
Group. It is only valid when accessGroupChecking is
set to ON. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
non(1), free(2) |
|
pcolFltr |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6 |
OBJECT IDENTIFIER |
|
|
|
accessGroupTableMaxEntries |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.1 |
The maximum number of entries in the table
accessGroupTable. In the RBLC this value is 2500. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
accessGroupTableCurEntries |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.2 |
The current number of entries in the table
accessGroupTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
accessGroupTable |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3 |
A list of Access Group Entries. The number is given by
accessGroupTableCurEntries. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AccessGroupEntry |
|
accessGroupEntry |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1 |
An Access Group Entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AccessGroupEntry |
|
|
accessGroupAddr |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.1 |
The MAC address of this entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
accessGroupInUse |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.2 |
This object is ON for valid entries. The entry may be
removed by setting this object to OFF. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notInUse(1), inUse(2) |
|
accessGroupNon |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.3 |
Dictates if this MAC address shall belong to the
Non-Access group.Membership of this group is
mutually exclusive from all other groups. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupFree |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.4 |
Dictates if this MAC address shall belong to the
Free Access Group. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupMgmt |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.5 |
Dictates if this MAC address shall belong to the
Management group.Membership of this group is
mutually exclusive from all other groups. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN1 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.6 |
Dictates if this MAC address shall belong to Named
Access Group 1. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN2 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.7 |
Dictates if this MAC address shall belong to Named
Access Group 2. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN3 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.8 |
Dictates if this MAC address shall belong to Named
Access Group 3. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN4 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.9 |
Dictates if this MAC address shall belong to Named
Access Group 4. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN5 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.10 |
Dictates if this MAC address shall belong to Named
Access Group 5. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN6 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.11 |
Dictates if this MAC address shall belong to Named
Access Group 6. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN7 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.12 |
Dictates if this MAC address shall belong to Named
Access Group 7. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN8 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.13 |
Dictates if this MAC address shall belong to Named
Access Group 8. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN9 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.14 |
Dictates if this MAC address shall belong to Named
Access Group 9. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN10 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.15 |
Dictates if this MAC address shall belong to Named
Access Group 10. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN11 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.16 |
Dictates if this MAC address shall belong to Named
Access Group 11. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN12 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.17 |
Dictates if this MAC address shall belong to Named
Access Group 12. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN13 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.18 |
Dictates if this MAC address shall belong to Named
Access Group 13. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN14 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.19 |
Dictates if this MAC address shall belong to Named
Access Group 14. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN15 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.20 |
Dictates if this MAC address shall belong to Named
Access Group 15. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupN16 |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.21 |
Dictates if this MAC address shall belong to Named
Access Group 16. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inGroup(1), notInGroup(2) |
|
accessGroupMembers |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.3.1.22 |
This is a bitmap, giving membership of the sixteen named access
groups in a single integer. Bit 0 corresponds to group N1, and
bit 15 to group N16.
Management stations which can make use of integer bitmaps should
obviously use this variable, as it is more compact in PDU
bandwidth, and is considerably faster for the agent to generate. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
accessGroupNamedIdMaxEntries |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.4 |
The number Named Access Groups. In the RBLC this
object has the value 16. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
accessGroupNamedIdTable |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5 |
A list of Named Access Group identifiers. The number
is given by accessGroupNamedIdMaxEntries. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AccessGroupNamedIdEntry |
|
accessGroupNamedIdEntry |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5.1 |
Tok_String |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AccessGroupNamedIdEntry |
|
|
accessGroupNamedIdIndex |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5.1.1 |
A unique value for each Named Access Group. Its value
ranges between 1 and the value of
accessGroupNamedNumber. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
accessGroupNamedIdIdentifier |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.4.5.1.2 |
A textual identifier for this Named Access Group. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
pcolOperation |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.1 |
The logical operation of the individual protocol
filters. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
and(1), or(2) |
|
pcolNumber |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.2 |
The number of individual protocol filters. For the
RBLC this value will be 8. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
pcolTable |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3 |
A list of protocol filter entries. The number is given
by pcolNumber. This size is fixed. No gaps are allowed
in the table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PcolEntry |
|
pcolEntry |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1 |
A protocol filter entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PcolEntry |
|
|
pcolIndex |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.1 |
A unique value for each protocol filter. Its value
ranges between 1 and the value of pcolNumber. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
pcolInUse |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.2 |
This object controls the appearance of valid protocol filter
table entries, i.e. entries which contain a meaningful filter.
Setting this field to 'notinuse' causes the row to be
deleted |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notinuse(1), inuse(2) |
|
pcolState |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.3 |
This object is ON if the protocol filter in this entry
is being used to filter frames. This object is only
meaningful if pcolInUse is set to 'inuse'. This
protocol filter is turned off by setting this object
to OFF. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), on(2) |
|
pcolIdentifier |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.4 |
A string used to identify this protocol filter. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
pcolOffset |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.5 |
Offset within the frame of the 4-byte field on which
filtering is to be performed. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
pcolMask |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.6 |
This object is ANDed with the 4-byte field in the
frame. The result is compared with pcolMatch. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
pcolMatch |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.7 |
This object is compared with the result of ANDing
pcolMask with the 4-byte field. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
pcolDecision |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.8 |
Determines whether the comparison of pcolMatch and
the masked data field will cause the action specified
in pcolAction to be taken on a match, or not. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
nomatch(1), match(2) |
|
pcolAction |
1.3.6.1.4.1.170.1.1.3.1.1.1.3.1.6.3.1.9 |
The action specified for this individual protocol
filter. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
filter(1), lopriority(2), hipriority(3) |
|
bridgeMgmt |
1.3.6.1.4.1.170.1.1.3.1.1.2.1 |
OBJECT IDENTIFIER |
|
|
|
brgMgmtMyName |
1.3.6.1.4.1.170.1.1.3.1.1.2.1.1 |
The name associated with this bridge for the
purpose of remote management. It is this name
which shall be used within multicast name PDU's |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
brgMgmtHelloTime |
1.3.6.1.4.1.170.1.1.3.1.1.2.1.2 |
The time interval, in seconds, between the
transmission of successive bridge management
hello packets |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
brgMgmtManagerAddr |
1.3.6.1.4.1.170.1.1.3.1.1.2.1.3 |
The IP Address of the remote station currently
managing the bridge. This remote station can
be another bridge, or any device supporting
Telnet. Note, that this address is not the
same as that of a possible SNMP client which
is managing the bridge. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
brgMgmtTableMaxEntries |
1.3.6.1.4.1.170.1.1.3.1.1.2.1.4 |
The maximum size of the Bridge Name Table. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
brgMgmtTableCurEntries |
1.3.6.1.4.1.170.1.1.3.1.1.2.1.5 |
The current number of known remote bridges in the
Bridge Name Table. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
brgMgmtTable |
1.3.6.1.4.1.170.1.1.3.1.1.2.1.6 |
The table of known remote bridges which can be
managed by this bridge. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
BrgMgmtEntry |
|
brgMgmtEntry |
1.3.6.1.4.1.170.1.1.3.1.1.2.1.6.1 |
An entry in the Remote Bridge Table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
BrgMgmtEntry |
|
|
brgMgmtAddr |
1.3.6.1.4.1.170.1.1.3.1.1.2.1.6.1.1 |
The IP address of a remote bridge |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
brgMgmtName |
1.3.6.1.4.1.170.1.1.3.1.1.2.1.6.1.2 |
The name of the bridge to use when trying
to remotely administer it. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
dynDBase |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.1 |
OBJECT IDENTIFIER |
|
|
|
dynType |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.1 |
This object specifies how the dynamic filtering is
implemented. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
hardware(1), software(2) |
|
dynTableMaxEntries |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.2 |
The maximum number of entries in the dynamic filter
table. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dynTableCurEntries |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.3 |
The current number of entries in the dynamic filter
table. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dynTable |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4 |
The dynamic filter table |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DynEntry |
|
dynEntry |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1 |
A dynamic table entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DynEntry |
|
|
dynAddr |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1.1 |
The dynamically learned MAC source address. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
dynHomePort |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1.2 |
The port number, sptreePortIndex, on which the
dynamic source address was received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
dynInUse |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.1.4.1.3 |
This object is INUSE for valid dynamic table entries.
Entries may be removed by setting it to NOTINUSE. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notinuse(1), inuse(2) |
|
typeFltr |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.5 |
OBJECT IDENTIFIER |
|
|
|
typeFltrStt |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.1 |
State of type filtering. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), only(2), except(3) |
|
typeFltrMaxEntries |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.2 |
The maximum number of entries allowed in the static
type filter table. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
typeFltrCurEntries |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.3 |
The current number of entries in the static type
filter table. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
typeFltrTable |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4 |
Static type filter table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TypeFltrEntry |
|
typeFltrEntry |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1 |
An entry in the static type filter table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TypeFltrEntry |
|
|
typeFltrFrom |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1.1 |
Type filter table 'from' type (inclusive). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
typeFltrTo |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1.2 |
Type filter table 'to' type (inclusive). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
typeFltrInUse |
1.3.6.1.4.1.170.1.1.3.1.1.2.2.5.4.1.3 |
Entries are removed by setting this object to
NOTINUSE. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notinuse(1), inuse(2) |
|
bridgeBootCount |
1.3.6.1.4.1.170.1.1.3.1.1.2.3.1 |
The number of times this system has been auto-booted.
(This refers to auto-reboots only.) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
bridgeRestartCause1 |
1.3.6.1.4.1.170.1.1.3.1.1.2.3.2 |
A code for a system error that causes a self-initiated
restart. These codes are ordered from the earliest to
the latest ie bridgeRestartCause1 is the earliest, and
bridgeRestartCause4 is the latest. The code is
expressed as an 8 digit hex number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bridgeRestartCause2 |
1.3.6.1.4.1.170.1.1.3.1.1.2.3.3 |
A code for a system error that causes a self-initiated
restart. These codes are ordered from the earliest to
the latest ie bridgeRestartCause1 is the earliest, and
bridgeRestartCause4 is the latest. The code is
expressed as an 8 digit hex number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bridgeRestartCause3 |
1.3.6.1.4.1.170.1.1.3.1.1.2.3.4 |
A code for a system error that causes a self-initiated
restart. These codes are ordered from the earliest to
the latest ie bridgeRestartCause1 is the earliest, and
bridgeRestartCause4 is the latest. The code is
expressed as a 8 digit hex number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
bridgeRestartCause4 |
1.3.6.1.4.1.170.1.1.3.1.1.2.3.5 |
A code for a system error that causes a self-initiated
restart. These codes are ordered from the earliest to
the latest ie bridgeRestartCause1 is the earliest, and
bridgeRestartCause4 is the latest. The code is
expressed as a 8 digit hex number. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
supportedMaxEntries |
1.3.6.1.4.1.170.1.1.3.2.1 |
Number of entries in the supported table. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
supportedTable |
1.3.6.1.4.1.170.1.1.3.2.2 |
A table of OBJECT IDENTIFIERs, pointing to MIB groups
which are supported in this agent. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SupportedEntry |
|
supportedEntry |
1.3.6.1.4.1.170.1.1.3.2.2.1 |
The OBJECT IDENTIFIER for a portion of the MIB,
showing which parts of the MIB are implemented by the
product. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SupportedEntry |
|
|
supportedIndex |
1.3.6.1.4.1.170.1.1.3.2.2.1.1 |
A simple numeric index into the supported table, to
assist with indexing. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
supportedID |
1.3.6.1.4.1.170.1.1.3.2.2.1.2 |
A pointer to a supported MIB sub-tree |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
unSupportedMaxEntries |
1.3.6.1.4.1.170.1.1.3.2.3 |
Number of entries in the unsupported table. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
unSupportedTable |
1.3.6.1.4.1.170.1.1.3.2.4 |
A table of OBJECT IDENTIFIERs, pointing to MIB
groups, tables OR variables which are NOT supported
in this agent. The unsupported OBJECT IDENTIFIERs
are always subtrees of the supported table (that is,
they show the management station what elements of the
supported groups are not implemented). |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
UnSupportedEntry |
|
unSupportedEntry |
1.3.6.1.4.1.170.1.1.3.2.4.1 |
The OBJECT IDENTIFIER for a portion of the MIB,
showing which parts of the supported MIB are not
implemented by the product. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
UnSupportedEntry |
|
|
unSupportedIndex |
1.3.6.1.4.1.170.1.1.3.2.4.1.1 |
A simple numeric index into the unsupported table, to
assist with indexing. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
unSupportedID |
1.3.6.1.4.1.170.1.1.3.2.4.1.2 |
A pointer to an unsupported sub-tree of a supported
MIB sub-tree |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
mibVersion |
1.3.6.1.4.1.170.1.1.3.3.1 |
This is an object which is unique to a particular MIB in
a particular product. It is read by the SpiderManager
and is broken down into the following structure:
':', where 'product
version' is a string of the type '2.3.1'
(product-specific), and 'MIB version' identifies
the particular flavour of SpiderMIB, such as '1:0' |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
admin |
1.3.6.1.4.1.170.1.1.3.3.2 |
OBJECT IDENTIFIER |
|
|
|
admSessionStt |
1.3.6.1.4.1.170.1.1.3.3.2.1 |
The state of the management session on the product. Management
sessions can only be invoked if the value of this object is
noManagementSession(1). Traps may be generated when this
object changes (implementation specific). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noManagementSession(1), localManagementSession(2), telnetManagementSession(3), snmpManagementSession(4), remoteBridgeManagementSession(5), latManagementSession(6), tp4ManagementSession(7), vtpManagementSession(8) |
|
admManagerAddr |
1.3.6.1.4.1.170.1.1.3.3.2.2 |
The IP address of the product initiating an SNMP or
Telnet management session. This object is 0.0.0.0
when no management session is underway, and is set to
this value automatically when a session closes, or is
timed out. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
admLockDevice |
1.3.6.1.4.1.170.1.1.3.3.2.3 |
The host sets this variable to prevent other hosts from
being able to use SNMP SET requests. This is intended for
use when a host needs to carry out a series of SET
operations as effectively one atomic access. When this
variable is set, the IP address of the host is copied into
'admManagerAddr', and the management session timer is
started. If the session timer expires without any contact
by the locking host, the session lock is cleared, and the
IP address zeroed. The standard Spider session time limit
is two minutes. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
admOverrideDevice |
1.3.6.1.4.1.170.1.1.3.3.2.4 |
The host sets this variable to override the current
lock owner. This has the effect of zeroing the
'admLockDevice' and 'admManagerAddr' variables,
and cancelling the management session. A
'sessionAborted' trap is sent to the host which
locked the previous management session. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
yes(1), no(2) |
|
admPrompt |
1.3.6.1.4.1.170.1.1.3.3.2.5 |
The string used for the command line prompt in a local
or remote administration session. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
admPassword |
1.3.6.1.4.1.170.1.1.3.3.2.6 |
The password required to start a management session
to the administration mode of the product. It is
intended that this be encrypted by a simple algorithm
before it is sent onto the network. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
admSignOnMsg |
1.3.6.1.4.1.170.1.1.3.3.2.7 |
The sign on message presented at the start of a local
or remote administration session. This is typically
the product type, name and version. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
admMgmtSessionTime |
1.3.6.1.4.1.170.1.1.3.3.2.8 |
The timeout used for management session closure. If a
management session is idle for this time it will close
automatically and no configuration change will be
made. The unit is seconds. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
admLastWriteAddr |
1.3.6.1.4.1.170.1.1.3.3.2.9 |
The IP address of the source of the last received SNMP
SET request. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
admRemManagerAddr |
1.3.6.1.4.1.170.1.1.3.3.2.10 |
The address of the product initiating a management session
corresponding to admSessionStt. This object is of zero
length when no management session is underway, and is
set to this value automatically when a session closes,
or is timed out. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..64) |
|
resources |
1.3.6.1.4.1.170.1.1.3.3.4 |
OBJECT IDENTIFIER |
|
|
|
resSmartGatewayAddr |
1.3.6.1.4.1.170.1.1.3.3.4.3 |
The IP address of the default gateway for the product.
A value of 0.0.0.0 is used if there is no default
gateway. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
restart |
1.3.6.1.4.1.170.1.1.3.3.5 |
OBJECT IDENTIFIER |
|
|
|
rstDoBoot |
1.3.6.1.4.1.170.1.1.3.3.5.1 |
When set to doBoot(1) the product should send the
getResponse message using the parameters rstBootFrom and
rstBootfilename(if applicable), and then reboot. Reading
this object always returns a value of noMeaning(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
doBoot(1), noMeaning(2) |
|
rstDoRestart |
1.3.6.1.4.1.170.1.1.3.3.5.4 |
When set to doRestart(1) the product should restart after
sending the getResponse message. Reading this object
always returns a value of noMeaning(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
doRestart(1), noMeaning(2) |
|
rstNeedRestart |
1.3.6.1.4.1.170.1.1.3.3.5.5 |
If the value of this object is needRestart(2) some
configuration parameters have been changed which will not
take effect until the product is restarted using
rstDoRestart. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dontNeedRestart(1), needRestart(2) |
|
rstDownLoadStt |
1.3.6.1.4.1.170.1.1.3.3.5.6 |
If the value of this object is downLoading(2) a
configuration download is in progress. The following rules
apply: If a management session closes normally and
rstDownLoadStt has the value downLoading(2) non-volatile
storage is updated and the product restarts. If a
management session closes for any other reason and
rstDownLoadStt has the value downLoading(2) non-volatile
storage is NOT updated and the product restarts. This
ensures the original configuration is restored leaving the
product in a consistent state. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notDownLoading(1), downLoading(2) |
|
rstNumberRestarts |
1.3.6.1.4.1.170.1.1.3.3.5.7 |
A count of the number of restarts (this includes
reboots) the product has undergone. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
rstLastConfigChngTime |
1.3.6.1.4.1.170.1.1.3.3.5.8 |
The time at which the configuration of the agent was
last changed. A configuration change is considered
to have been made when non-volatile memory is updated
and the value of this object is the value of sysUpTime
when this occurs. Note that a configuration change
can be made using any access method such as SNMP, a
local terminal or a TELNET connection. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
trapCount |
1.3.6.1.4.1.170.1.1.3.4.1 |
OBJECT IDENTIFIER |
|
|
|
trapCountClear |
1.3.6.1.4.1.170.1.1.3.4.1.1 |
When set to clearCounts(1) the count of all traps in
the trapCountTable is reset to zero. Reading this
object always returns a value of noMeaning(2). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
clearCounts(1), noMeaning(2) |
|
trapCountMaxEntries |
1.3.6.1.4.1.170.1.1.3.4.1.2 |
The maximum number of entries allowed in the trapCountTable.
The actual number is the total of all of the types of
generic and enterprise traps that the device can send. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
trapCountTable |
1.3.6.1.4.1.170.1.1.3.4.1.3 |
A list of the numbers of traps of each type sent. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TrapCountEntry |
|
trapCountEntry |
1.3.6.1.4.1.170.1.1.3.4.1.3.1 |
An entry of trap counts for a particular trap type. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TrapCountEntry |
|
|
trapCountIndex |
1.3.6.1.4.1.170.1.1.3.4.1.3.1.1 |
A numeric index used to index the trapCountTable. Its
value ranges between 1 and the value of
trapCountMaxEntries. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
trapCountType |
1.3.6.1.4.1.170.1.1.3.4.1.3.1.2 |
The type of trap, generic or enterprise. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
generic(1), enterprise(2) |
|
trapCountCode |
1.3.6.1.4.1.170.1.1.3.4.1.3.1.3 |
The enumerated code for the trap, generic as
specified in [3] or enterprise as specified in the
management information document associated with
the product. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
trapCountEnable |
1.3.6.1.4.1.170.1.1.3.4.1.3.1.4 |
When the value is enableTrap(1) traps of this type are
forwarded to all stations in the trapDestsTable,
counted in the trapCountTable and stored in the
allTrapTable(if this is supported by the product).
When the value is disableTrap(2) traps of this type
are not forwarded to all stations in the
trapDestsTable. They are however counted in the
trapCountTable and entered in the allTrapTable (if
this is supported by the product). |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enableTrap(1), disableTrap(2) |
|
trapCountCount |
1.3.6.1.4.1.170.1.1.3.4.1.3.1.5 |
A count of the number of traps sent of each type since
the last reset of the product. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
trapCountTime |
1.3.6.1.4.1.170.1.1.3.4.1.3.1.6 |
The time of the last occurrence of a particular trap
type since the last reset of the product in one
hundredths of a second. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
trapCountDescr |
1.3.6.1.4.1.170.1.1.3.4.1.3.1.7 |
A description of the type of enterprise trap being
transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapDests |
1.3.6.1.4.1.170.1.1.3.4.3 |
OBJECT IDENTIFIER |
|
|
|
trapDestsCheckAddr |
1.3.6.1.4.1.170.1.1.3.4.3.1 |
The trapDestsCheckAddr object selects whether the
IP address of a station requesting a management
session is validated for presence in the trapDests
table. If validation is enabled and the address in the
SNMP request is not present in the trapDests table the
request is rejected. A trap may be sent if this occurs,
the choice is product specific. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
validateAddresses(1), dontValidateAddresses(2) |
|
trapDestsMaxEntries |
1.3.6.1.4.1.170.1.1.3.4.3.2 |
The maximum number of entries in the trapDestsTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
trapDestsCurEntries |
1.3.6.1.4.1.170.1.1.3.4.3.3 |
The number of traps in the trapDestsTable at any
instant. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
trapDestsTable |
1.3.6.1.4.1.170.1.1.3.4.3.4 |
A list of the destinations to which traps are sent. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TrapDestsEntry |
|
trapDestsEntry |
1.3.6.1.4.1.170.1.1.3.4.3.4.1 |
An entry for a station address to which traps are sent |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TrapDestsEntry |
|
|
trapDestsIpAddr |
1.3.6.1.4.1.170.1.1.3.4.3.4.1.1 |
The IP address of a station to which traps are sent. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
trapDestsSerialAddr |
1.3.6.1.4.1.170.1.1.3.4.3.4.1.2 |
The serial IP address of a station to which traps are
sent. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
trapDestsPhoneNumber |
1.3.6.1.4.1.170.1.1.3.4.3.4.1.3 |
The telephone number of a modem connected to the
product which can be dialed up to send traps. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
trapDestsSendTo |
1.3.6.1.4.1.170.1.1.3.4.3.4.1.4 |
The interface to send traps to. This selects whether
to send traps via the primary medium or the serial
line. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
primaryMedium(1), serialLine(2) |
|
trapDestsEnable |
1.3.6.1.4.1.170.1.1.3.4.3.4.1.5 |
When the value is sendTraps(1) traps are sent to this
address and are counted in the trapCountTable and
entered in the allTrapTable. When the value is
dontSendTraps(2) traps are not sent to this address.
They are however counted in the trapCountTable and
are entered in the allTrapTable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
sendTraps(1), dontSendTraps(2) |
|
trapDestsInUse |
1.3.6.1.4.1.170.1.1.3.4.3.4.1.7 |
Whether this entry is in use or not. This field is used
to delete entries from this table. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notInUse(1), inUse(2) |
|
spantree |
1.3.6.1.4.1.170.1.1.3.6.14 |
OBJECT IDENTIFIER |
|
|
|
sptreeGroupAddr |
1.3.6.1.4.1.170.1.1.3.6.14.15 |
The multicast address used by BPDUs. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
sptreeStt |
1.3.6.1.4.1.170.1.1.3.6.14.16 |
The Spanning Tree State of the bridge. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
sptreeInit |
1.3.6.1.4.1.170.1.1.3.6.14.17 |
When set to INITIALISE the parameters and timers of
the Spanning Tree algorithm and protocol are
initialised. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noinitialise(1), initialise(2) |
|
spIp |
1.3.6.1.4.1.170.1.1.3.6.16 |
OBJECT IDENTIFIER |
|
|
|
sipNxtBootTableMaxEntries |
1.3.6.1.4.1.170.1.1.3.6.16.1 |
The maximum number of entries allowed in the
NxtBootTable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
sipNxtBootTable |
1.3.6.1.4.1.170.1.1.3.6.16.2 |
A table of IP interfaces, used to change the IP
address, subnet mask and broadcast address, the next
time the system is booted. The table indexed by the
current IP address of the interface. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SipNxtBootEntry |
|
sipNxtBootEntry |
1.3.6.1.4.1.170.1.1.3.6.16.2.1 |
This table entry consists of the current IP address of
this interface, followed by the new IP address,
broadcast form and subnet masks. These will not take
effect, until the system is rebooted. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SipNxtBootEntry |
|
|
sipNxtBootCurIp |
1.3.6.1.4.1.170.1.1.3.6.16.2.1.1 |
This is the current IP address of the interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
sipNxtBootNxtIp |
1.3.6.1.4.1.170.1.1.3.6.16.2.1.2 |
The desired IP address of this interface, once the
system is rebooted. The subnetmask will be changed
accordingly, to cover the default mask for that IP
address. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
sipNxtBootBbdCast |
1.3.6.1.4.1.170.1.1.3.6.16.2.1.3 |
Sets the broadcast address to be all ones, or all
zeroes. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
allones(1), allzeroes(2) |
|
sipNxtBootSubnetMask |
1.3.6.1.4.1.170.1.1.3.6.16.2.1.4 |
The subnet mask associated with the IP address entry.
If sipNxtBootNxtIp is specified, then the subnet
mask automatically changes to the default mask for
the network class of the new IP entry. If
sipNxtBootSubnetMask is also changed, it must at
least cover the default for the new IP address (also
dependent upon its network class), or the current IP
address if no new one specified. Also, if the new
address is on a different network, and there are
gateways on the current network, a badValue error
will be returned. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|