LIEBERT-GP-AGENT-MIB

File: LIEBERT-GP-AGENT-MIB.mib (18798 bytes)

Imported modules

RFC1213-MIB SNMPv2-SMI LIEBERT-GP-REGISTRATION-MIB
SNMPv2-TC LIEBERT-GP-CONDITIONS-MIB

Imported symbols

sysUpTime OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE OBJECT-IDENTITY Integer32
Unsigned32 lgpAgentIdent lgpAgentDevice
lgpAgentControl liebertAgentModuleReg lgpAgentNotifications
DisplayString lgpConditionsPresent lgpConditionDescription
lgpNetworkName

Defined Types

LgpAgentManagedDeviceEntry  
SEQUENCE    
  lgpAgentDeviceIndex INTEGER
  lgpAgentDeviceId OBJECT IDENTIFIER
  lgpAgentDeviceManufacturer DisplayString
  lgpAgentDeviceModel DisplayString
  lgpAgentDeviceFirmwareVersion DisplayString
  lgpAgentDeviceUnitNumber Integer32
  lgpAgentDeviceSerialNumber DisplayString
  lgpAgentDeviceManufactureDate DisplayString
  lgpAgentDeviceServiceContact DisplayString
  lgpAgentDeviceServicePhoneNumber DisplayString
  lgpAgentDeviceServiceAddrLine1 DisplayString
  lgpAgentDeviceServiceAddrLine2 DisplayString
  lgpAgentDeviceServiceAddrLine3 DisplayString
  lgpAgentDeviceServiceAddrLine4 DisplayString
  lgpAgentDeviceUnitName DisplayString
  lgpAgentDeviceSiteIdentifier DisplayString
  lgpAgentDeviceTagNumber DisplayString
  lgpAgentDeviceOrderLine1 DisplayString
  lgpAgentDeviceOrderLine2 DisplayString

Defined Values

liebertAgentModule 1.3.6.1.4.1.476.1.42.1.2.1
The MIB module used to specify Liebert software or firmware agent SNMP OIDs. Copyright 2000-2008 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY    

lgpAgentIdentManufacturer 1.3.6.1.4.1.476.1.42.2.1.1
The agent manufacturer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(255)  

lgpAgentIdentModel 1.3.6.1.4.1.476.1.42.2.1.2
The agent model designation. This identifier is typically a model name or ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(255)  

lgpAgentIdentFirmwareVersion 1.3.6.1.4.1.476.1.42.2.1.3
The firmware revision level of the agent.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

lgpAgentIdentSerialNumber 1.3.6.1.4.1.476.1.42.2.1.4
The serial number of the agent. This is a string of alphanumeric characters that uniquely identifies the agent hardware. This number is assigned when the agent hardware is manufactured and does not change throughout its lifecycle.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

lgpAgentIdentPartNumber 1.3.6.1.4.1.476.1.42.2.1.5
The agent model part number designation.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(255)  

lgpAgentConnectedDeviceCount 1.3.6.1.4.1.476.1.42.2.1.6
The number of devices currently connected and communicating successfully with the agent. Devices for which communications are currently being attempted are not considered in this count.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

lgpAgentEventNotifications 1.3.6.1.4.1.476.1.42.2.3.0
Agent specific notifications.
Status: current Access: read-only
OBJECT-IDENTITY    

lgpAgentDeviceCommunicationLost 1.3.6.1.4.1.476.1.42.2.3.0.1
The agent has lost communications with a managed device.
Status: current Access: read-only
NOTIFICATION-TYPE    

lgpAgentFirmwareUpdateSuccessful 1.3.6.1.4.1.476.1.42.2.3.0.5
The firmware update to the agent card has completed successfully.
Status: current Access: read-only
NOTIFICATION-TYPE    

lgpAgentFirmwareCorrupt 1.3.6.1.4.1.476.1.42.2.3.0.6
The firmware update to the agent card has failed and the firmware is now corrupt.
Status: current Access: read-only
NOTIFICATION-TYPE    

lgpAgentHeartbeat 1.3.6.1.4.1.476.1.42.2.3.0.7
The agent card is alive.
Status: current Access: read-only
NOTIFICATION-TYPE    

lgpAgentDnsLookupFailure 1.3.6.1.4.1.476.1.42.2.3.0.8
A Domain Name System (DNS) lookup of a network name failed to resolve. This may result in one or more of the following: 1. failure to notify a target address of an important condition 2. failure allow access for monitoring purposes This issue should be resolved as soon as possible with a network or system administrator.
Status: current Access: read-only
NOTIFICATION-TYPE    

lgpAgentEventNotificationsLegacy 1.3.6.1.4.1.476.1.42.2.3.0.0
This branch contains copies of the notifications registered directly below lgpAgentEventNotifications. These are here to provide support for some legacy devices which send out lgpAgentEventNotifications as the SNMPv1 enterprise trap parameter instead of lgpAgentNotifications, which causes problems with some SNMP clients when converting from V1 to V2 notifications (RFC3584 Section 3).
Status: current Access: read-only
OBJECT-IDENTITY    

lgpAgentDeviceCommunicationLostLegacy 1.3.6.1.4.1.476.1.42.2.3.0.0.1
The agent has lost communications with a managed device.
Status: current Access: read-only
NOTIFICATION-TYPE    

lgpAgentFirmwareUpdateSuccessfulLegacy 1.3.6.1.4.1.476.1.42.2.3.0.0.5
The firmware update to the agent card has completed successfully.
Status: current Access: read-only
NOTIFICATION-TYPE    

lgpAgentFirmwareCorruptLegacy 1.3.6.1.4.1.476.1.42.2.3.0.0.6
The firmware update to the agent card has failed and the firmware is now corrupt.
Status: current Access: read-only
NOTIFICATION-TYPE    

lgpAgentHeartbeatLegacy 1.3.6.1.4.1.476.1.42.2.3.0.0.7
The agent card is alive.
Status: current Access: read-only
NOTIFICATION-TYPE    

lgpAgentDnsLookupFailureLegacy 1.3.6.1.4.1.476.1.42.2.3.0.0.8
A Domain Name System (DNS) lookup of a network name failed to resolve. This may result in one or more of the following: 1. failure to notify a target address of an important condition 2. failure allow access for monitoring purposes This issue should be resolved as soon as possible with a network or system administrator.
Status: current Access: read-only
NOTIFICATION-TYPE    

lgpAgentManagedDeviceTable 1.3.6.1.4.1.476.1.42.2.4.2
This table contains one entry for each managed device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LgpAgentManagedDeviceEntry

lgpAgentManagedDeviceEntry 1.3.6.1.4.1.476.1.42.2.4.2.1
This entry describes a row in the table 'lgpAgentManagedDeviceTable'. The rows in this table cannot be created by the NMS. The rows are automatically created by the agent based upon the hardware configuration of the Liebert managed device(s) being monitored with this agent.
Status: current Access: not-accessible
OBJECT-TYPE    
  LgpAgentManagedDeviceEntry  

lgpAgentDeviceIndex 1.3.6.1.4.1.476.1.42.2.4.2.1.1
The device identifier. This is used as an index to address a particular row in the table 'lgpAgentManagedDeviceTable'.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65536  

lgpAgentDeviceId 1.3.6.1.4.1.476.1.42.2.4.2.1.2
The managed device specific identifier defined by the product registration.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

lgpAgentDeviceManufacturer 1.3.6.1.4.1.476.1.42.2.4.2.1.3
The managed device manufacturer.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(255)  

lgpAgentDeviceModel 1.3.6.1.4.1.476.1.42.2.4.2.1.4
The managed device model designation.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(255)  

lgpAgentDeviceFirmwareVersion 1.3.6.1.4.1.476.1.42.2.4.2.1.5
The firmware revision level of the managed device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

lgpAgentDeviceUnitNumber 1.3.6.1.4.1.476.1.42.2.4.2.1.6
The managed device unit number. Typically this is a number assigned to a managed device that uniquely identifies it from other similar devices within a 'system'.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

lgpAgentDeviceSerialNumber 1.3.6.1.4.1.476.1.42.2.4.2.1.7
The serial number of the managed device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

lgpAgentDeviceManufactureDate 1.3.6.1.4.1.476.1.42.2.4.2.1.8
The manufacture date of the managed device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(64)  

lgpAgentDeviceServiceContact 1.3.6.1.4.1.476.1.42.2.4.2.1.9
The service contact of the managed device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

lgpAgentDeviceServicePhoneNumber 1.3.6.1.4.1.476.1.42.2.4.2.1.10
The phone number of the service contact of the managed device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

lgpAgentDeviceServiceAddrLine1 1.3.6.1.4.1.476.1.42.2.4.2.1.11
Line 1 of the service address of the managed device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

lgpAgentDeviceServiceAddrLine2 1.3.6.1.4.1.476.1.42.2.4.2.1.12
Line 2 of the service address of the managed device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

lgpAgentDeviceServiceAddrLine3 1.3.6.1.4.1.476.1.42.2.4.2.1.13
Line 3 of the service address of the managed device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

lgpAgentDeviceServiceAddrLine4 1.3.6.1.4.1.476.1.42.2.4.2.1.14
Line 4 of the service address of the managed device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

lgpAgentDeviceUnitName 1.3.6.1.4.1.476.1.42.2.4.2.1.15
Unit name for the managed device assigned by the customer.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

lgpAgentDeviceSiteIdentifier 1.3.6.1.4.1.476.1.42.2.4.2.1.16
Identifier that uniquely identifies the site where this device is located.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

lgpAgentDeviceTagNumber 1.3.6.1.4.1.476.1.42.2.4.2.1.17
Identifier that uniquely identifies this device within a particular site (see lgpAgentDeviceSiteIdentifier).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

lgpAgentDeviceOrderLine1 1.3.6.1.4.1.476.1.42.2.4.2.1.18
Customer Sales Order information line 1.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

lgpAgentDeviceOrderLine2 1.3.6.1.4.1.476.1.42.2.4.2.1.19
Customer Sales Order information line 2.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

lgpAgentReboot 1.3.6.1.4.1.476.1.42.2.5.1
Perform an immediate 'reboot' of the agent process. When possible the reboot will approximate a power on reset of the agent communications hardware. This type of reboot will be performed if a hardware reset is supported by the hardware/software on the communications card. Otherwise a 'software' reboot will be executed. In both cases a temporary loss of communications and other agent functionality will result. Any valid INTEGER value may be written to this object to initiate the reboot operation. If read the value '0' will always be returned.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

lgpAgentTelnetEnabled 1.3.6.1.4.1.476.1.42.2.5.2
This object represents the settings of Telnet. yes Telnet services are enabled. no Telnet services are disabled. The system must be rebooted before changes can take effect.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lgpAgentVelocityServerEnabled 1.3.6.1.4.1.476.1.42.2.5.3
This object configures the Velocity Server to grant external clients access to agent data via the Liebert Velocity protocol. yes Agent data is available to external clients via the Liebert Velocity protocol. no Agent data is not available to external clients via the Liebert Velocity protocol. The system must be rebooted before changes can take effect.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lgpAgentWebServerMode 1.3.6.1.4.1.476.1.42.2.5.4
This object represents the settings of Web services. disabled Web services are disabled. http Web server mode is HTTP (not secure). https Web server mode is secure HTTP. The system must be rebooted before changes can take effect.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), http(1), https(2)