LINK-INCIDENT-MIB

File: LINK-INCIDENT-MIB.mib (25005 bytes)

Imported modules

Brocade-REG-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
OBJECT-IDENTITY	NOTIFICATION-TYPE	TEXTUAL-CONVENTION
DisplayString	fcSwitch

Defined Types

FcPortID
Represents Fibre Channel Address ID, a 24-bit value unique within the address space of a Fabric.
TEXTUAL-CONVENTION
	OCTET STRING	Size(3)

RLIRLinkFailureType
Represents the link failure type
TEXTUAL-CONVENTION
	INTEGER	bitErrorRate(2), lossOfSignal(3), nOSRecognized(4), primitiveSequenceTimeout(5), invalidSeqForPortState(6), loopInitializationTimeout(7), lossOfSignalInLoopInit(8)

LinkWwn
Represents the link WWN
TEXTUAL-CONVENTION
	OCTET STRING	Size(8)

PortType
Represents the Port Type
TEXTUAL-CONVENTION
	INTEGER	n-port(1), nl-port(2), e-port(3)

LinkFormat
Represents the frame format
TEXTUAL-CONVENTION
	INTEGER	ficon(1), common(2)

RegType
Represents the RNID Registration Type
TEXTUAL-CONVENTION
	INTEGER	conditional(1), unconditional(2)

LIRRProtocol
Represents the LIRR Protocol
TEXTUAL-CONVENTION
	INTEGER	fcp(1), sb2(2)

RNIDTagType
Represents the value of RNID Tag in Hexa Decimal format
TEXTUAL-CONVENTION
	OCTET STRING	Size(2)

RNIDFlags
Represents the value of RNID Flag in Hexa Decimal format. It indicates if the node is valid, not valid, or not current. The ``Flag'' values also indi- cate the following: 0x00 Indicates node ID of the (storage port for RNID, switch for SwitchRNID) is valid. 0x10 Indicates node ID of the chan- nel port is valid. 0x20 Indicates the node ID of the storage port is not current. 0x30 Indicates the node ID of the channel port is not current. 0x40 Indicates the the node ID of the (storage port for RNID, switch for RLIR) is not valid. 0x50 Indicates the node ID of the channel port is not valid.
TEXTUAL-CONVENTION
	OCTET STRING	Size(1)

RNIDType
Represents the value of Type Number - Displays the type number of the self describing node. It also describes the machine type.
TEXTUAL-CONVENTION
	OCTET STRING	Size(6)

RNIDModel
Represents the value of Model Number.
TEXTUAL-CONVENTION
	OCTET STRING	Size(3)

RNIDManufacturer
Represents the Manufacturer name or code.
TEXTUAL-CONVENTION
	OCTET STRING	Size(3)

RNIDManufacturerPlant
The manufacture plant name or code.
TEXTUAL-CONVENTION
	OCTET STRING	Size(2)

RNIDSequenceNumber
Sequence number of the self describing node.
TEXTUAL-CONVENTION
	OCTET STRING	Size(12)

RNIDParams
Represents the value of Param. It is the incident node parameters type in three bytes: ``0xAABBCC''. The meaning of each byte is described below: Byte AA: 0x00 Reserved 0x20 FC-SB-2 and updates. 0x40 Other FC-4s including FCP and updates. 0x60 FC-SB-2 and updates and other FC-4s including FCP and updates. 0x80 FC-4 support not specified. 0xa0 Reserved. 0xc0 Reserved. 0xe0 Vendor specific. Byte BB: 0x00 Unspecified class 0x01 Direct access storage device, if it is an storage port. Otherwise, it is not channel to channel capable. 0x02 Magnetic tape, if it is an storage port. Otherwise, if it is a reserved field for a channel port. 0x03 Input unit record, if it is an storage port. Otherwise, it is a reserved field for a channel port. 0x04 Output unit, if it is an stor- age port. Otherwise, it is a reserved field for a channel port. 0x05 Printer, if it is an storage port. Otherwise, it is a reserved field for a channel port. 0x06 Controler, if it is an storage port. Otherwise, it is a reserved field for a channel port. 0x07 Terminal - Full screen if it is an storage port. Otherwise, it is a reserved field for a channel port. 0x08 Terminal - Line mode if it is an storage port. Otherwise, it is an emulated control unit support only. 0x09 Reserved. 0x10 Switch, if it is a switch device. Otherwise, it is reserved. 0x0b 0xff Reserved. Byte CC: 0x00 If storage CU port has regis- tered with the switch. 0xID CHIPID if channel port has registered with the switch. 0xPN If switch has registered with the channel then PN represent the FL port number.
TEXTUAL-CONVENTION
	OCTET STRING	Size(3)

NodeRNIDEntry
SEQUENCE
	nodeRNIDIndex	Integer32
	nodeRNIDIncidentPortWWN	LinkWwn
	nodeRNIDPID	FcPortID
	nodeRNIDFlags	RNIDFlags
	nodeRNIDType	RNIDType
	nodeRNIDModel	RNIDModel
	nodeRNIDManufacturer	RNIDManufacturer
	nodeRNIDManufacturerPlant	RNIDManufacturerPlant
	nodeRNIDSequenceNumber	RNIDSequenceNumber
	nodeRNIDConnectedPortWWN	LinkWwn
	nodeRNIDPortType	PortType
	nodeRNIDFormat	LinkFormat
	nodeRNIDTag	RNIDTagType
	nodeRNIDParams	RNIDParams

SwitchRNIDEntry
SEQUENCE
	switchRNIDIndex	Integer32
	switchRNIDSwitchWWN	LinkWwn
	switchRNIDFlags	RNIDFlags
	switchRNIDType	RNIDType
	switchRNIDModel	RNIDModel
	switchRNIDManufacturer	RNIDManufacturer
	switchRNIDManufacturerPlant	RNIDManufacturerPlant
	switchRNIDSequenceNumber	RNIDSequenceNumber
	switchRNIDTag	RNIDTagType
	switchRNIDParams	RNIDParams

LIRREntry
SEQUENCE
	lIRRIndex	Integer32
	lIRRListenerPortWWN	LinkWwn
	lIRRListenerPID	FcPortID
	lIRRRegType	RegType
	lIRRProtocol	LIRRProtocol
	lIRRPortType	PortType
	lIRRFormat	LinkFormat

RLIREntry
SEQUENCE
	rLIRIndex	Integer32
	rLIRIncidentPortWwn	LinkWwn
	rLIRIncidentNodeWwn	LinkWwn
	rLIRIncidentPortType	PortType
	rLIRIncidentPID	FcPortID
	rLIRIncidentPortNumber	Integer32
	rLIRConnectedPortWwn	LinkWwn
	rLIRConnectedNodeWwn	LinkWwn
	rLIRFabricWwn	LinkWwn
	rLIRLinkFailureType	RLIRLinkFailureType
	rLIRTimeStamp	DisplayString
	rLIRFormat	LinkFormat

Defined Values

linkIncidentMIB		1.3.6.1.4.1.1588.2.1.1.50
The MIB module defines support for FICON in Fabos. This MIB addresses link incident and link failure data for ficon host/devices connected to a Brocade switch
MODULE-IDENTITY

ficonRNID		1.3.6.1.4.1.1588.2.1.1.50.2
The OID sub-tree for ficonRNID. This group contains all RNID group objects for FICON.
Status: current	Access: read-only
OBJECT-IDENTITY

nodeRNIDTableNumEntries		1.3.6.1.4.1.1588.2.1.1.50.2.1
The number of entries in Request Node Identification Data (RNID) table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

nodeRNIDTable		1.3.6.1.4.1.1588.2.1.1.50.2.2
A table that contains, one entry for each Ficon RNID node attached to a switch.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NodeRNIDEntry

nodeRNIDEntry		1.3.6.1.4.1.1588.2.1.1.50.2.2.1
A entry containing the RNID information for a ficon node
Status: current	Access: not-accessible
OBJECT-TYPE
	NodeRNIDEntry

nodeRNIDIndex		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.1
Index into nodeRNIDTable
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

nodeRNIDIncidentPortWWN		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.2
Port WWN for Incident port. An N-port (ficon device or host) is an incident port
Status: current	Access: read-only
OBJECT-TYPE
	LinkWwn

nodeRNIDPID		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.3
PID for an Incident port.
Status: current	Access: read-only
OBJECT-TYPE
	FcPortID

nodeRNIDFlags		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.4
RNID flags for an Incident port.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDFlags

nodeRNIDType		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.5
Number associate with a node
Status: current	Access: read-only
OBJECT-TYPE
	RNIDType

nodeRNIDModel		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.6
Model number of the RNID node
Status: current	Access: read-only
OBJECT-TYPE
	RNIDModel

nodeRNIDManufacturer		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.7
Identifies the manufaturer of the node.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDManufacturer

nodeRNIDManufacturerPlant		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.8
Identifies the manufacturer plant of the node.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDManufacturerPlant

nodeRNIDSequenceNumber		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.9
Identifies the sequence number of the node.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDSequenceNumber

nodeRNIDConnectedPortWWN		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.10
WWN of the connected port.
Status: current	Access: read-only
OBJECT-TYPE
	LinkWwn

nodeRNIDPortType		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.11
Port type (N, E, NL or virtual port) of the connected port.
Status: current	Access: read-only
OBJECT-TYPE
	PortType

nodeRNIDFormat		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.12
Node identification data format of the connected port.
Status: current	Access: read-only
OBJECT-TYPE
	LinkFormat

nodeRNIDTag		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.13
Node identification tag of the connected port.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDTagType

nodeRNIDParams		1.3.6.1.4.1.1588.2.1.1.50.2.2.1.14
Node parameters of the connected port.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDParams

switchRNIDTableNumEntries		1.3.6.1.4.1.1588.2.1.1.50.2.3
The number of entries in RNID table which corresponds to switch.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

switchRNIDTable		1.3.6.1.4.1.1588.2.1.1.50.2.4
A table that contains, one entry for each switch ficon node.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwitchRNIDEntry

switchRNIDEntry		1.3.6.1.4.1.1588.2.1.1.50.2.4.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SwitchRNIDEntry

switchRNIDIndex		1.3.6.1.4.1.1588.2.1.1.50.2.4.1.1
Index into switchRNIDTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

switchRNIDSwitchWWN		1.3.6.1.4.1.1588.2.1.1.50.2.4.1.2
WWN of the switch.
Status: current	Access: read-only
OBJECT-TYPE
	LinkWwn

switchRNIDFlags		1.3.6.1.4.1.1588.2.1.1.50.2.4.1.3
RNID flags for switch.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDFlags

switchRNIDType		1.3.6.1.4.1.1588.2.1.1.50.2.4.1.4
Type Number associate with a switch.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDType

switchRNIDModel		1.3.6.1.4.1.1588.2.1.1.50.2.4.1.5
Model number of the RNID switch.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDModel

switchRNIDManufacturer		1.3.6.1.4.1.1588.2.1.1.50.2.4.1.6
Identifies the manufaturer of the switch.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDManufacturer

switchRNIDManufacturerPlant		1.3.6.1.4.1.1588.2.1.1.50.2.4.1.7
Identifies the manufacturer plant of the switch.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDManufacturerPlant

switchRNIDSequenceNumber		1.3.6.1.4.1.1588.2.1.1.50.2.4.1.8
Identifies the sequence number of the switch.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDSequenceNumber

switchRNIDTag		1.3.6.1.4.1.1588.2.1.1.50.2.4.1.9
Identification tag of the switch.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDTagType

switchRNIDParams		1.3.6.1.4.1.1588.2.1.1.50.2.4.1.10
Parameters of the switch.
Status: current	Access: read-only
OBJECT-TYPE
	RNIDParams

nodeVfId		1.3.6.1.4.1.1588.2.1.1.50.2.5
The Virtual fabric id of the switch. For VF unaware switches this value will be 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

ficonSlot		1.3.6.1.4.1.1588.2.1.1.50.2.6
It indicates the slot number in the switch.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ficonPort		1.3.6.1.4.1.1588.2.1.1.50.2.7
It indicates the port number in the switch.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ficonLIRR		1.3.6.1.4.1.1588.2.1.1.50.3
The OID sub-tree for ficonLIRR. This group contains all LIRR group objects for FICON.
Status: current	Access: read-only
OBJECT-IDENTITY

lIRRTableNumEntries		1.3.6.1.4.1.1588.2.1.1.50.3.1
The number of entries in Link Incident Record Registration (LIRR) table
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

lIRRTable		1.3.6.1.4.1.1588.2.1.1.50.3.2
A table that contains, one entry for each LIRR incident for an attached FICON device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		LIRREntry

lIRREntry		1.3.6.1.4.1.1588.2.1.1.50.3.2.1
An entry containing LIRR information.
Status: current	Access: not-accessible
OBJECT-TYPE
	LIRREntry

lIRRIndex		1.3.6.1.4.1.1588.2.1.1.50.3.2.1.1
Index into the LIRR table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

lIRRListenerPortWWN		1.3.6.1.4.1.1588.2.1.1.50.3.2.1.2
WWN of the Listener port.
Status: current	Access: read-only
OBJECT-TYPE
	LinkWwn

lIRRListenerPID		1.3.6.1.4.1.1588.2.1.1.50.3.2.1.3
PID for the listener port.
Status: current	Access: read-only
OBJECT-TYPE
	FcPortID

lIRRRegType		1.3.6.1.4.1.1588.2.1.1.50.3.2.1.4
Registration type - conditional or unconditional.
Status: current	Access: read-only
OBJECT-TYPE
	RegType

lIRRProtocol		1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5
Protocol type supported.
Status: current	Access: read-only
OBJECT-TYPE
	LIRRProtocol

lIRRPortType		1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6
Attached port type.
Status: current	Access: read-only
OBJECT-TYPE
	PortType

lIRRFormat		1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7
Registration type - conditional or unconditional.
Status: current	Access: read-only
OBJECT-TYPE
	LinkFormat

ficonRLIR		1.3.6.1.4.1.1588.2.1.1.50.4
The OID sub-tree for ficonRLIR. This group contains all RLIR group objects for FICON.
Status: current	Access: read-only
OBJECT-IDENTITY

rLIRTableNumEntries		1.3.6.1.4.1.1588.2.1.1.50.4.1
The number of entries in switch Registered Link Incident Report (RLIR) table
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rLIRTable		1.3.6.1.4.1.1588.2.1.1.50.4.2
A table that contains, one entry for each LIRR incident for an attached FICON device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RLIREntry

rLIREntry		1.3.6.1.4.1.1588.2.1.1.50.4.2.1
An entry containing RLIR information.
Status: current	Access: not-accessible
OBJECT-TYPE
	RLIREntry

rLIRIndex		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1
Index into RLIR table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rLIRIncidentPortWwn		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.2
Port WWN for RLIR Incident port.
Status: current	Access: read-only
OBJECT-TYPE
	LinkWwn

rLIRIncidentNodeWwn		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.3
Incident node WWN.
Status: current	Access: read-only
OBJECT-TYPE
	LinkWwn

rLIRIncidentPortType		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.5
RLIR Incident port type.
Status: current	Access: read-only
OBJECT-TYPE
	PortType

rLIRIncidentPID		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6
RLIR Incident PID.
Status: current	Access: read-only
OBJECT-TYPE
	FcPortID

rLIRIncidentPortNumber		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.7
RLIR Incident port number.This is vendor specific port number.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

rLIRConnectedPortWwn		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8
RLIR Connected port WWN.
Status: current	Access: read-only
OBJECT-TYPE
	LinkWwn

rLIRConnectedNodeWwn		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.9
RLIR Connected node WWN.
Status: current	Access: read-only
OBJECT-TYPE
	LinkWwn

rLIRFabricWwn		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.10
RLIR Fabric Wwn.
Status: current	Access: read-only
OBJECT-TYPE
	LinkWwn

rLIRLinkFailureType		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.11
RLIR Link failure type.
Status: current	Access: read-only
OBJECT-TYPE
	RLIRLinkFailureType

rLIRTimeStamp		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.12
RLIR time stamp.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

rLIRFormat		1.3.6.1.4.1.1588.2.1.1.50.4.2.1.13
RLIR Format.
Status: current	Access: read-only
OBJECT-TYPE
	LinkFormat

linkIncidentMIBTraps		1.3.6.1.4.1.1588.2.1.1.50.21
The OID sub-tree for Link Incident trap.
Status: current	Access: read-only
OBJECT-IDENTITY

linkIncidentMIBTrapPrefix		1.3.6.1.4.1.1588.2.1.1.50.21.0
The Link Incident traps.
Status: current	Access: read-only
OBJECT-IDENTITY

linkRNIDDeviceRegistration		1.3.6.1.4.1.1588.2.1.1.50.21.0.1
A device registered with the switch
Status: current	Access: read-only
NOTIFICATION-TYPE

linkRNIDDeviceDeRegistration		1.3.6.1.4.1.1588.2.1.1.50.21.0.2
A device de-regsitered with the switch
Status: current	Access: read-only
NOTIFICATION-TYPE

linkLIRRListenerAdded		1.3.6.1.4.1.1588.2.1.1.50.21.0.3
A listener for link failure incident is added
Status: current	Access: read-only
NOTIFICATION-TYPE

linkLIRRListenerRemoved		1.3.6.1.4.1.1588.2.1.1.50.21.0.4
A listener for link failure incident is removed
Status: current	Access: read-only
NOTIFICATION-TYPE

linkRLIRFailureIncident		1.3.6.1.4.1.1588.2.1.1.50.21.0.5
A link failure incident has occured. The value of lIRRIndex will be -2147483647 and lIRRListenerPID will be 0 (zero) , if there is no listener for incident.
Status: current	Access: read-only
NOTIFICATION-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor