LUMINOUS-SYSTEM-MIB

File: LUMINOUS-SYSTEM-MIB.mib (24892 bytes)

Imported modules

SNMPv2-SMI RFC1213-MIB SNMPv2-TC
LUMINOUS-TC-MIB

Imported symbols

TimeTicks enterprises MODULE-IDENTITY
OBJECT-TYPE NOTIFICATION-TYPE ObjectName
Integer32 Counter32 DisplayString
RowStatus DateAndTime LumSlotNum
LumAdminStatus LumOperStatus LumName
LumDescr LumPortNum LumSimpleIndex
LumAlarmSeverity LumCardBaseType LumVersionString
LumResetCmd LumSignalState

Defined Types

LumSystemResetCardEntry  
SEQUENCE    
  lumSystemResetCardIndex LumSlotNum
  lumSystemResetCardCmd LumResetCmd

LumAlarmActiveEntry  
SEQUENCE    
  lumAlarmActiveIndex Integer32
  lumAlarmActiveType INTEGER
  lumAlarmActiveValue Integer32
  lumAlarmActiveStatus INTEGER
  lumAlarmActiveTimeStamp TimeTicks
  lumAlarmActiveSlotId LumSlotNum
  lumAlarmActivePortId LumPortNum

LumAlarmHistoryEntry  
SEQUENCE    
  lumAlarmHistoryIndex Integer32
  lumAlarmHistoryData DisplayString

Defined Values

luminous 1.3.6.1.4.1.4614
OBJECT IDENTIFIER    

lumADM 1.3.6.1.4.1.4614.1
OBJECT IDENTIFIER    

lumSystemMIB 1.3.6.1.4.1.4614.1.4
The Luminous System MIB contains information related to the Luminous system configurations and monitoring.
MODULE-IDENTITY    

lumSoftwareDownload 1.3.6.1.4.1.4614.1.4.1
OBJECT IDENTIFIER    

lumSystemReset 1.3.6.1.4.1.4614.1.4.2
OBJECT IDENTIFIER    

lumAlarms 1.3.6.1.4.1.4614.1.4.3
OBJECT IDENTIFIER    

lumAlarmType 1.3.6.1.4.1.4614.1.4.3.1
OBJECT IDENTIFIER    

lumAlarmSource 1.3.6.1.4.1.4614.1.4.3.2
OBJECT IDENTIFIER    

lumAlarmLog 1.3.6.1.4.1.4614.1.4.3.4
OBJECT IDENTIFIER    

lumAlarmSummary 1.3.6.1.4.1.4614.1.4.3.5
OBJECT IDENTIFIER    

lumAlarmTraps 1.3.6.1.4.1.4614.1.4.3.10
OBJECT IDENTIFIER    

lumAlarmV2Traps 1.3.6.1.4.1.4614.1.4.3.0
OBJECT IDENTIFIER    

lumDownLoadImageType 1.3.6.1.4.1.4614.1.4.1.1
The type of image to be downloaded.
Status: current Access: read-write
OBJECT-TYPE    
  LumCardBaseType  

lumDownLoadHost 1.3.6.1.4.1.4614.1.4.1.2
The IP address or name of the image downloading host.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

lumDownLoadUsrName 1.3.6.1.4.1.4614.1.4.1.3
The user logging name for accessing the image downloading host.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

lumDownLoadPasswd 1.3.6.1.4.1.4614.1.4.1.4
The password associated with the lumDownLoadUsrName when accessing the image downloading host.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..16)  

lumDownLoadFilePath 1.3.6.1.4.1.4614.1.4.1.5
The image file name and its directory path on the downloading host.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

lumDownLoadVersion 1.3.6.1.4.1.4614.1.4.1.6
The version number of the image file to be downloaded.
Status: current Access: read-write
OBJECT-TYPE    
  LumVersionString  

lumDownLoadSlot 1.3.6.1.4.1.4614.1.4.1.7
The slot number to which the image will be downloaded to. When the slot number is 0, all the applicable cards are to be downloaded with the image.
Status: current Access: read-write
OBJECT-TYPE    
  LumSlotNum  

lumDownLoadTimeOut 1.3.6.1.4.1.4614.1.4.1.8
The length of time, in minutes, that agent allows the download process to continue.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

lumDownLoadCmd 1.3.6.1.4.1.4614.1.4.1.9
Set object to download(2) to active the image download process. The image downloading related objects should have been properly configuered. The download command will be rejected if the the lumDownLoadStatus has a value of download-in-progress(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), download(2)  

lumDownLoadStatus 1.3.6.1.4.1.4614.1.4.1.10
The status of a previously issued software download command.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), download-in-progress(2), download-succeeded(3), download-failed(4)  

lumDownLoadAbort 1.3.6.1.4.1.4614.1.4.1.11
Abort the software download process.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), abort(2)  

lumSystemResetCardTable 1.3.6.1.4.1.4614.1.4.2.1
The Luminous line card reset table.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LumSystemResetCardEntry

lumSystemResetCardEntry 1.3.6.1.4.1.4614.1.4.2.1.1
An lumSystemResetCardEntry contains a line card to be reset.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  LumSystemResetCardEntry  

lumSystemResetCardIndex 1.3.6.1.4.1.4614.1.4.2.1.1.1
The line card number.
Status: deprecated Access: read-only
OBJECT-TYPE    
  LumSlotNum  

lumSystemResetCardCmd 1.3.6.1.4.1.4614.1.4.2.1.1.2
Reset a line card. This will always return none on read.
Status: deprecated Access: read-write
OBJECT-TYPE    
  LumResetCmd  

lumSystemResetShelfCmd 1.3.6.1.4.1.4614.1.4.2.2
Reset the Luminous shelf. This will always return none on read.
Status: deprecated Access: read-write
OBJECT-TYPE    
  LumResetCmd  

lumProvisionAlarmType 1.3.6.1.4.1.4614.1.4.3.1.1
The provision Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER provCardFailedNoBackup(1), provCardFailedWithBackup(2)  

lumAlarmCardAlarmType 1.3.6.1.4.1.4614.1.4.3.1.2
The Alarm card Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER input0(1), input1(2), input2(3), input3(4), input4(5), input5(6), input6(7), input7(8), alarmCardFailedNoBackup(9), alarmCardFailedWithBackup(10), card-lost(11)  

lumSysconAlarmType 1.3.6.1.4.1.4614.1.4.3.1.3
The Syscon card Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER cmmlf(1), redundancy-lost(2)  

lumT1AlarmType 1.3.6.1.4.1.4614.1.4.3.1.4
The T1 card Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER bpv(1), lof(2), los(3), ais(4), rai(5), ovrfl(6), sf-ber(7), sf-es(8), sf-ses(9), tcfl(10)  

lumTEN100AlarmType 1.3.6.1.4.1.4614.1.4.3.1.5
The 10/100 card Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER an-fail(1), los(2), symer(3), rxer(4), frlex(5), aler(6), fcserr(7)  

lumSonetAlarmType 1.3.6.1.4.1.4614.1.4.3.1.6
The Sonet card Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER laser-loop(1), laser-bias(2), laser-pwr(3), loss-of-sync(4), los-s(5), lof-s(6), ais-l(7), rfi-l(8), sf-ber(9), sd-ber(10), ais-p(11), rfi-p(12), lop-p(13), uneq-p(14), plm-p(15), aps-k1(16), aps-k2(17), aps-mode(18), aps-far-end(19), aps-success(20), aps-failed(21)  

lumRingCardAlarmType 1.3.6.1.4.1.4614.1.4.3.1.7
The Ring card Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER los(1), losynch(2), sf-ber(3), sd-ber(4), pri-los(5), sec-los(6), io-west-lost(7), io-east-lost(8), io-card-lost(9), switch-fabric-lost(10), switch-fabric-redundancy-lost(11)  

lumUtilityAlarmType 1.3.6.1.4.1.4614.1.4.3.1.8
The Utility card Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER vltg(1), hitmp(2), pwra(3), pwrb(4), card-lost(5)  

lumEquipmentAlarmType 1.3.6.1.4.1.4614.1.4.3.1.9
The Equipment Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER fncrt(1), fnmjr(2), boot(3), hwfl(4), hitmp(5), vltg(6), trans-mea(7), sgeo(8), ueq(9), mea(10), prov-io-card-lost(11), io-card-lost(12), prov-io-card-mismatched(13), io-card-mismatched(14)  

lumDataFlowAlarmType 1.3.6.1.4.1.4614.1.4.3.1.10
The Data Flow Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER sf-dfc(1), sf-ifc(2), sf-bfc(3)  

lumDataBaseAlarmType 1.3.6.1.4.1.4614.1.4.3.1.11
The Data Base Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER saveFailed(1), restoreFailed(2)  

lumPPPAlarmType 1.3.6.1.4.1.4614.1.4.3.1.12
The PPP Alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER linkDown(1)  

lumAlarmSlotId 1.3.6.1.4.1.4614.1.4.3.2.1
The card's slot number. Starts with 1 for the both front plane and for the back plane.
Status: current Access: not-accessible
OBJECT-TYPE    
  LumSlotNum  

lumAlarmPortId 1.3.6.1.4.1.4614.1.4.3.2.2
The card's port number.
Status: current Access: not-accessible
OBJECT-TYPE    
  LumPortNum  

lumAlarmStatus 1.3.6.1.4.1.4614.1.4.3.3
The status of the alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER alarmClear(1), alarmSet(2), alarmMasked(3)  

lumAlarmSummaryGroup 1.3.6.1.4.1.4614.1.4.3.5.1
OBJECT IDENTIFIER    

lumAlarmSummaryState 1.3.6.1.4.1.4614.1.4.3.5.1.1
This reflect the highest severity of any active alarm.
Status: current Access: read-only
OBJECT-TYPE    
  LumAlarmSeverity  

lumAlarmSummaryCriticalStatus 1.3.6.1.4.1.4614.1.4.3.5.1.2
This is active if one or more critical alarms are active.
Status: current Access: read-only
OBJECT-TYPE    
  LumSignalState  

lumAlarmSummaryMajorStatus 1.3.6.1.4.1.4614.1.4.3.5.1.3
This is active if one or more major alarms are active.
Status: current Access: read-only
OBJECT-TYPE    
  LumSignalState  

lumAlarmSummaryMinorStatus 1.3.6.1.4.1.4614.1.4.3.5.1.4
This is active if one or more minor alarms are active.
Status: current Access: read-only
OBJECT-TYPE    
  LumSignalState  

lumAlarmActiveTable 1.3.6.1.4.1.4614.1.4.3.4.1
The Luminous active alarms table which contains all the currently active alarms.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LumAlarmActiveEntry

lumAlarmActiveEntry 1.3.6.1.4.1.4614.1.4.3.4.1.1
An lumAlarmActive Entry contains the information for an active alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  LumAlarmActiveEntry  

lumAlarmActiveIndex 1.3.6.1.4.1.4614.1.4.3.4.1.1.1
This is the index to the actvie alarm log.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lumAlarmActiveType 1.3.6.1.4.1.4614.1.4.3.4.1.1.2
The alarm type which corresponds to one of the types defined under lumAlarmType.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER provision(1), alarmCard(2), syscon(3), t1(4), tEN100(5), sonet(6), ringCard(7), utility(8), equipment(9), dataFlow(10), dataBase(11)  

lumAlarmActiveValue 1.3.6.1.4.1.4614.1.4.3.4.1.1.3
The specific alarm. The meaning of the value of this object can be found by looking up the enums defined uner lumAlarmType.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lumAlarmActiveStatus 1.3.6.1.4.1.4614.1.4.3.4.1.1.4
The active alarm status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarmClear(1), alarmSet(2), alarmMasked(3)  

lumAlarmActiveTimeStamp 1.3.6.1.4.1.4614.1.4.3.4.1.1.5
The alarm time stamp.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

lumAlarmActiveSlotId 1.3.6.1.4.1.4614.1.4.3.4.1.1.6
The card's slot number. Slot number 0 is used for alarms that do not associate with a particular slot.
Status: current Access: read-only
OBJECT-TYPE    
  LumSlotNum  

lumAlarmActivePortId 1.3.6.1.4.1.4614.1.4.3.4.1.1.7
The card's port number. Port number 0 is used for alarms that do not associate with a particular port.
Status: current Access: read-only
OBJECT-TYPE    
  LumPortNum  

lumAlarmHistoryTable 1.3.6.1.4.1.4614.1.4.3.4.2
The Luminous alarms history table which contains all the occured alarms. The actual retrieveable alarm entries depends on system memory utilization
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LumAlarmHistoryEntry

lumAlarmHistoryEntry 1.3.6.1.4.1.4614.1.4.3.4.2.1
An lumAlarmHistoryEntry contains the information for an occured alarm.
Status: current Access: not-accessible
OBJECT-TYPE    
  LumAlarmHistoryEntry  

lumAlarmHistoryIndex 1.3.6.1.4.1.4614.1.4.3.4.2.1.1
This is the index to the alarm history table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

lumAlarmHistoryData 1.3.6.1.4.1.4614.1.4.3.4.2.1.2
The text message of the alarm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

lumAlarmSummaryChangeTrap 1.3.6.1.4.1.4614.1.4.3.0.1
This notification is issued when the Alarm Summary information changes.
Status: current Access: read-only
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor