M2000-V2
File:
M2000-V2.mib (37242 bytes)
Imported modules
Imported symbols
Defined Values
iMAP |
1.3.6.1.4.1.2011 |
This MIB defines the managed objects that are used
by the function interfaces of the SNMP Northbound
Interface. |
MODULE-IDENTITY |
|
|
|
products |
1.3.6.1.4.1.2011.2 |
OBJECT IDENTIFIER |
|
|
|
iMAPNorthboundHeartbeatNotificationType |
1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.0.5 |
The M2000 sends the heartbeat notification trap to the NMS
regularly each period. If the NMS receives the trap, the
connection between the NMS and the M2000 works. If not,
the connection fails. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
iMAPNorthboundHeartbeatSystemLabel |
1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.1 |
Managed system ID: indicates the managed system from which the heartbeat notification is reported.
It uniquely identifies one EMS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundHeartbeatTimeStamp |
1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.3 |
Time stamp: the time when the notification is generated |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundHeartbeatSvcReportInterval |
1.3.6.1.4.1.2011.2.15.2.1.3.1.1 |
Accepts integral values in the range 3-300 (both end inclusive)
Sets heartbeat interval to the value supplied. A heart beat is sent immediately consisting of changed interval.
Attempt to set with invalid value results in error. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
iMAPNorthboundAlarmQuery |
1.3.6.1.4.1.2011.2.15.2.4.1.5 |
Accepts only values 0 and 1 (single character)
Attempt to set any other value returns error
1-> starts query active alarm process (if previous query alarm process is in progress then error is returned)
0-> stops the previous query active alarm process in progress (if any)
|
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundFaultAlarmReportNotificationType |
1.3.6.1.4.1.2011.2.15.2.4.3.3.0.1 |
The M2000 system sends real-time alarms to the NMS using this trap.
If an alarm occurs to an NE or the M2000, the M2000 sends the alarm
trap to the NMS. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
iMAPNorthboundFaultAlarmQueryBeginNotificationType |
1.3.6.1.4.1.2011.2.15.2.4.3.3.0.2 |
The M2000 notifies the NMS of the start of the query.
After the NMS receives the active alarm query start
trap, the query starts.
The trap is triggered by NMS for alarm query. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
iMAPNorthboundFaultAlarmQueryEndNotificationType |
1.3.6.1.4.1.2011.2.15.2.4.3.3.0.4 |
The M2000 notifies the NMS of the stop of the query.
After the NMS receives the active alarm query stop
trap, it indicates that the query ends.
The NMS triggers the stop of the query, or the query
ends after the NMS receives the active alarms. |
Status: current |
Access: read-write |
NOTIFICATION-TYPE |
|
|
|
iMAPNorthboundAlarmCSN |
1.3.6.1.4.1.2011.2.15.2.4.3.3.1 |
Alarm network number > 0 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmCategory |
1.3.6.1.4.1.2011.2.15.2.4.3.3.2 |
Category can be one of the following:
1. Fault
2. Clear
3. Event
4. Acknowledge
5. Unacknowledge
9. Change
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmMOName |
1.3.6.1.4.1.2011.2.15.2.4.3.3.4 |
Managed object name |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmProductID |
1.3.6.1.4.1.2011.2.15.2.4.3.3.5 |
Product type ID:
1:transmission
2:mobile
3:fixed network narrowband
4:fixed network broadband
5:intelligent network
6:omc |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
transmission(1), mobile(2), fixedNetworkNarrow(3), bandFixedBand(4), intelligence(5), omc(6) |
|
iMAPNorthboundAlarmNEType |
1.3.6.1.4.1.2011.2.15.2.4.3.3.6 |
NE type > 0 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmDevCsn |
1.3.6.1.4.1.2011.2.15.2.4.3.3.8 |
Device serial number |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmLevel |
1.3.6.1.4.1.2011.2.15.2.4.3.3.11 |
Level is the alarm severity. It can be one of the following:
1. Critical
2. Major
3. Minor
4. Warning
6. Cleared |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
critical(1), major(2), minor(3), warning(4), cleared(6) |
|
iMAPNorthboundAlarmRestore |
1.3.6.1.4.1.2011.2.15.2.4.3.3.12 |
Alarm clear status
1:Cleared
2:Uncleared |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
cleared(1), uncleared(2) |
|
iMAPNorthboundAlarmConfirm |
1.3.6.1.4.1.2011.2.15.2.4.3.3.13 |
Alarm acknowledgement status
1:Acknowledged
2:Unacknowledged |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
acknowledged(1), unacknowledged(2) |
|
iMAPNorthboundAlarmAckTime |
1.3.6.1.4.1.2011.2.15.2.4.3.3.14 |
Acknowledged time |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmOperator |
1.3.6.1.4.1.2011.2.15.2.4.3.3.16 |
It identifies the last user who has changed the Acknowledged State. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmParas10 |
1.3.6.1.4.1.2011.2.15.2.4.3.3.26 |
Original alarm level,
defined by the device when the alarm is generated.
1 Critical
2 Major
3 Minor
4 Warning |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
iMAPNorthboundAlarmExtendInfo |
1.3.6.1.4.1.2011.2.15.2.4.3.3.27 |
Extended information (max: 250 characters) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmProbablecause |
1.3.6.1.4.1.2011.2.15.2.4.3.3.28 |
Alarm Probablecause (max: 250 characters) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmClearOperator |
1.3.6.1.4.1.2011.2.15.2.4.3.3.46 |
The operator who cleared this alarm. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..255) |
|
iMAPNorthboundAlarmClearCategory |
1.3.6.1.4.1.2011.2.15.2.4.3.3.48 |
Clear Category of Alarms |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmClearType |
1.3.6.1.4.1.2011.2.15.2.4.3.3.49 |
Clear type of alarms |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmAdditionalInfo |
1.3.6.1.4.1.2011.2.15.2.4.3.3.51 |
Additional Information regarding the alarm |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..250) |
|
iMAPNorthboundAlarmAcknowledge |
1.3.6.1.4.1.2011.2.15.2.4.4.1 |
Give serial number(s) of alarms to be acknowledged.
Multiple serial numbers are separated by comma(,).
Alarms serial number(s) are of type unsigned long and
incompatible types are automatically considered
as invalid serial number(s). Get attempt on this node
will result in error.
Output: Serial number(s) of alarms which could not be
acknowledged. This also contains invalid Alarm
serial number(s). If all alarms are successfully
acknowledged then output is blank. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmUnAcknowledge |
1.3.6.1.4.1.2011.2.15.2.4.5.1 |
Give serial number(s) of alarms to be unacknowledged.
Multiple serial numbers are separated by comma(,).
Alarms serial number(s) are of type unsigned long and
incompatible types are automatically considered
as invalid serial number(s). Get attempt on this node
will result in error.
Output: Serial number(s) of alarms which could not be
unacknowledged. This also contains invalid Alarm
serial number(s). If all alarms are successfully
unacknowledged then output is blank. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
iMAPNorthboundAlarmClear |
1.3.6.1.4.1.2011.2.15.2.4.6.1 |
Give serial number(s) of alarms to be cleared.
Multiple serial numbers are separated by comma(,).
Alarms serial number(s)are of type unsigned long and
incompatible types are automatically considered
as invalid serial number(s). Get attempt on this node
will result in error.
Output: Serial number(s) of alarms which could not be
cleared. This also contains invalid Alarm
serial number(s). If all alarms are successfully
cleared then output is blank. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
currentObjectGroup |
1.3.6.1.4.1.2011.3.1.1 |
The OBJECT-GROUP for SNMP Northbound Interface |
Status: current |
Access: read-write |
OBJECT-GROUP |
|
|
|
currentNotificationGroup |
1.3.6.1.4.1.2011.3.1.2 |
The NOTIFICATION-GROUP for SNMP Northbound Interface. |
Status: current |
Access: read-write |
NOTIFICATION-GROUP |
|
|
|
basicCompliance |
1.3.6.1.4.1.2011.3.2.1 |
MODULE-COMPLIANCE for SNMP Northbound Interface |
Status: current |
Access: read-write |
MODULE-COMPLIANCE |
|
|
|