ME1200-DHCP-SERVER-MIB

File: ME1200-DHCP-SERVER-MIB.mib (66637 bytes)

Imported modules

SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
CISCOME1200-MIB	ME1200-TC

Imported symbols

MODULE-COMPLIANCE	OBJECT-GROUP	MODULE-IDENTITY
OBJECT-TYPE	TEXTUAL-CONVENTION	me1200SwitchMgmt
ME1200DisplayString	ME1200InterfaceIndex	ME1200RowEditorState
ME1200Unsigned16	Integer32	IpAddress
Unsigned32	MacAddress	TruthValue

Defined Types

ME1200BindingState
This enumeration defines the state of binding.
TEXTUAL-CONVENTION
	INTEGER	none(0), allocated(1), committed(2), expired(3)

ME1200BindingType
This enumeration defines the type of binding.
TEXTUAL-CONVENTION
	INTEGER	none(0), automatic(1), manual(2), expired(3)

ME1200ClientIdentifierType
This enumeration defines the type of client identifier.
TEXTUAL-CONVENTION
	INTEGER	none(0), fqdn(1), mac(2)

ME1200NetbiosNodeType
This enumeration defines the type of NetBIOS node.
TEXTUAL-CONVENTION
	INTEGER	nodeNone(0), nodeB(1), nodeP(2), nodeM(3), nodeH(4)

ME1200PoolType
This enumeration defines the type of DHCP pool.
TEXTUAL-CONVENTION
	INTEGER	none(0), network(1), host(2)

ME1200DhcpServerConfigVlanEntry
SEQUENCE
	me1200DhcpServerConfigVlanIfIndex	ME1200InterfaceIndex
	me1200DhcpServerConfigVlanMode	TruthValue

ME1200DhcpServerConfigExcludedEntry
SEQUENCE
	me1200DhcpServerConfigExcludedLowIpAddress	IpAddress
	me1200DhcpServerConfigExcludedHighIpAddress	IpAddress
	me1200DhcpServerConfigExcludedAction	ME1200RowEditorState

ME1200DhcpServerConfigPoolEntry
SEQUENCE
	me1200DhcpServerConfigPoolPoolName	ME1200DisplayString
	me1200DhcpServerConfigPoolPoolType	ME1200PoolType
	me1200DhcpServerConfigPoolIpv4Address	IpAddress
	me1200DhcpServerConfigPoolSubnetMask	IpAddress
	me1200DhcpServerConfigPoolSubnetBroadcast	IpAddress
	me1200DhcpServerConfigPoolLeaseDay	Unsigned32
	me1200DhcpServerConfigPoolLeaseHour	Unsigned32
	me1200DhcpServerConfigPoolLeaseMinute	Unsigned32
	me1200DhcpServerConfigPoolDomainName	ME1200DisplayString
	me1200DhcpServerConfigPoolDefaultRouter1	IpAddress
	me1200DhcpServerConfigPoolDefaultRouter2	IpAddress
	me1200DhcpServerConfigPoolDefaultRouter3	IpAddress
	me1200DhcpServerConfigPoolDefaultRouter4	IpAddress
	me1200DhcpServerConfigPoolDnsServer1	IpAddress
	me1200DhcpServerConfigPoolDnsServer2	IpAddress
	me1200DhcpServerConfigPoolDnsServer3	IpAddress
	me1200DhcpServerConfigPoolDnsServer4	IpAddress
	me1200DhcpServerConfigPoolNtpServer1	IpAddress
	me1200DhcpServerConfigPoolNtpServer2	IpAddress
	me1200DhcpServerConfigPoolNtpServer3	IpAddress
	me1200DhcpServerConfigPoolNtpServer4	IpAddress
	me1200DhcpServerConfigPoolNetbiosNodeType	ME1200NetbiosNodeType
	me1200DhcpServerConfigPoolNetbiosScope	ME1200DisplayString
	me1200DhcpServerConfigPoolNetbiosNameServer1	IpAddress
	me1200DhcpServerConfigPoolNetbiosNameServer2	IpAddress
	me1200DhcpServerConfigPoolNetbiosNameServer3	IpAddress
	me1200DhcpServerConfigPoolNetbiosNameServer4	IpAddress
	me1200DhcpServerConfigPoolNisDomainName	ME1200DisplayString
	me1200DhcpServerConfigPoolNisServer1	IpAddress
	me1200DhcpServerConfigPoolNisServer2	IpAddress
	me1200DhcpServerConfigPoolNisServer3	IpAddress
	me1200DhcpServerConfigPoolNisServer4	IpAddress
	me1200DhcpServerConfigPoolClientIdentifierType	ME1200ClientIdentifierType
	me1200DhcpServerConfigPoolClientIdentifierFqdn	ME1200DisplayString
	me1200DhcpServerConfigPoolClientIdentifierMac	MacAddress
	me1200DhcpServerConfigPoolClientHardwareAddress	MacAddress
	me1200DhcpServerConfigPoolClientName	ME1200DisplayString
	me1200DhcpServerConfigPoolVendorClassId1	ME1200DisplayString
	me1200DhcpServerConfigPoolVendorSpecificInfo1	ME1200DisplayString
	me1200DhcpServerConfigPoolVendorClassId2	ME1200DisplayString
	me1200DhcpServerConfigPoolVendorSpecificInfo2	ME1200DisplayString
	me1200DhcpServerConfigPoolVendorClassId3	ME1200DisplayString
	me1200DhcpServerConfigPoolVendorSpecificInfo3	ME1200DisplayString
	me1200DhcpServerConfigPoolVendorClassId4	ME1200DisplayString
	me1200DhcpServerConfigPoolVendorSpecificInfo4	ME1200DisplayString
	me1200DhcpServerConfigPoolAction	ME1200RowEditorState

ME1200DhcpServerStatusDeclinedEntry
SEQUENCE
	me1200DhcpServerStatusDeclinedEntryNo	Integer32
	me1200DhcpServerStatusDeclinedIpv4Address	IpAddress

ME1200DhcpServerStatusBindingEntry
SEQUENCE
	me1200DhcpServerStatusBindingIpAddress	IpAddress
	me1200DhcpServerStatusBindingState	ME1200BindingState
	me1200DhcpServerStatusBindingType	ME1200BindingType
	me1200DhcpServerStatusBindingPoolName	ME1200DisplayString
	me1200DhcpServerStatusBindingServerId	IpAddress
	me1200DhcpServerStatusBindingVlanId	ME1200Unsigned16
	me1200DhcpServerStatusBindingSubnetMask	IpAddress
	me1200DhcpServerStatusBindingClientIdentifierType	ME1200ClientIdentifierType
	me1200DhcpServerStatusBindingClientIdentifierFqdn	ME1200DisplayString
	me1200DhcpServerStatusBindingClientIdentifierMac	MacAddress
	me1200DhcpServerStatusBindingMacAddress	MacAddress
	me1200DhcpServerStatusBindingLease	ME1200DisplayString
	me1200DhcpServerStatusBindingTimeToExpire	ME1200DisplayString

Defined Values

me1200DhcpServerMIB		1.3.6.1.4.1.9.9.815.1.109
This is a private version of DhcpServer
MODULE-IDENTITY

me1200DhcpServerMIBObjects		1.3.6.1.4.1.9.9.815.1.109.1
OBJECT IDENTIFIER

me1200DhcpServerConfig		1.3.6.1.4.1.9.9.815.1.109.1.2
OBJECT IDENTIFIER

me1200DhcpServerConfigGlobals		1.3.6.1.4.1.9.9.815.1.109.1.2.1
OBJECT IDENTIFIER

me1200DhcpServerConfigGlobalsMode		1.3.6.1.4.1.9.9.815.1.109.1.2.1.1
Global mode of DHCP server. true(1) is to enable the functions of DHCP server and false(2) is to disable it.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

me1200DhcpServerConfigVlanTable		1.3.6.1.4.1.9.9.815.1.109.1.2.2
This is the table of DHCP server VLAN configuration. The index is VLAN ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ME1200DhcpServerConfigVlanEntry

me1200DhcpServerConfigVlanEntry		1.3.6.1.4.1.9.9.815.1.109.1.2.2.1
Each VLAN has a set of parameters
Status: current	Access: not-accessible
OBJECT-TYPE
	ME1200DhcpServerConfigVlanEntry

me1200DhcpServerConfigVlanIfIndex		1.3.6.1.4.1.9.9.815.1.109.1.2.2.1.1
Logical interface number of VLAN.
Status: current	Access: not-accessible
OBJECT-TYPE
	ME1200InterfaceIndex

me1200DhcpServerConfigVlanMode		1.3.6.1.4.1.9.9.815.1.109.1.2.2.1.2
VLAN mode of DHCP server. true(1) is to enable DHCP server per VLAN and false(2) is to disable it per VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

me1200DhcpServerConfigExcludedTable		1.3.6.1.4.1.9.9.815.1.109.1.2.3
The table is DHCP server excluded IP onfiguration table. The indexes are low IP and high IP address.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ME1200DhcpServerConfigExcludedEntry

me1200DhcpServerConfigExcludedEntry		1.3.6.1.4.1.9.9.815.1.109.1.2.3.1
Each entry has a set of parameters
Status: current	Access: not-accessible
OBJECT-TYPE
	ME1200DhcpServerConfigExcludedEntry

me1200DhcpServerConfigExcludedLowIpAddress		1.3.6.1.4.1.9.9.815.1.109.1.2.3.1.1
Low IP address.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigExcludedHighIpAddress		1.3.6.1.4.1.9.9.815.1.109.1.2.3.1.2
High IP address.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigExcludedAction		1.3.6.1.4.1.9.9.815.1.109.1.2.3.1.100
Action
Status: current	Access: read-write
OBJECT-TYPE
	ME1200RowEditorState

me1200DhcpServerConfigExcludedIpTableRowEditor		1.3.6.1.4.1.9.9.815.1.109.1.2.4
OBJECT IDENTIFIER

me1200DhcpServerConfigExcludedIpTableRowEditorLowIpAddress		1.3.6.1.4.1.9.9.815.1.109.1.2.4.1
Low IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigExcludedIpTableRowEditorHighIpAddress		1.3.6.1.4.1.9.9.815.1.109.1.2.4.2
High IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigExcludedIpTableRowEditorAction		1.3.6.1.4.1.9.9.815.1.109.1.2.4.100
Action
Status: current	Access: read-write
OBJECT-TYPE
	ME1200RowEditorState

me1200DhcpServerConfigPoolTable		1.3.6.1.4.1.9.9.815.1.109.1.2.5
The table is DHCP server pool onfiguration table. The indexe is pool name.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ME1200DhcpServerConfigPoolEntry

me1200DhcpServerConfigPoolEntry		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1
Each entry has a set of parameters
Status: current	Access: not-accessible
OBJECT-TYPE
	ME1200DhcpServerConfigPoolEntry

me1200DhcpServerConfigPoolPoolName		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.1
Name of DHCP pool.
Status: current	Access: not-accessible
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerConfigPoolPoolType		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.2
Type of pool. none(0) means the pool type is not defined yet. network(1) means the pool defines a pool of IP addresses to service more than one DHCP client. host(2) means the pool services for a specific DHCP client identified by client identifier or hardware address.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200PoolType

me1200DhcpServerConfigPoolIpv4Address		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.3
Network number of the subnet. If the pool type is of network, the IP address can be any general IP address. If the pool type is of host, the IP address must be a unicast IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolSubnetMask		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.4
Subnet Mask. DHCP option 1. Specify subnet mask of the DHCP address pool, excluding 0.0.0.0 and 255.255.255.255.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolSubnetBroadcast		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.5
Broadcast IP address in the subnet. DHCP option 28. Specify the broadcast address in use on the client's subnet.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolLeaseDay		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.6
Number of days of lease time. DHCP option 51, 58 and 59. The value range is 0-365. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

me1200DhcpServerConfigPoolLeaseHour		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.7
Number of hours of lease time. DHCP option 51, 58 and 59. The value range is 0-23. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

me1200DhcpServerConfigPoolLeaseMinute		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.8
Number of minutes of lease time. DHCP option 51, 58 and 59. The value range is 0-59. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

me1200DhcpServerConfigPoolDomainName		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.9
Domain name. DHCP option 15. Specify domain name that client should use when resolving hostname via DNS.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerConfigPoolDefaultRouter1		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.10
Default router 1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolDefaultRouter2		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.11
Default router 2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolDefaultRouter3		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.12
Default router 3.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolDefaultRouter4		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.13
Default router 4.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolDnsServer1		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.14
DNS server 1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolDnsServer2		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.15
DNS server 2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolDnsServer3		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.16
DNS server 3.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolDnsServer4		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.17
DNS server 4.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNtpServer1		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.18
NTP server 1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNtpServer2		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.19
NTP server 2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNtpServer3		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.20
NTP server 3.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNtpServer4		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.21
NTP server 4.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNetbiosNodeType		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.22
Type of NetBIOS node. DHCP option 46. Specify NetBIOS node type option to allow Netbios over TCP/IP clients which are configurable to be configured as described in RFC 1001/1002. nodeNone(0) means the node type is not defined yet. nodeB(1) means the node type is type of B. nodeP(2) means the node type is type of P. nodeM(3) means the node type is type of M. nodeH(4) means the node type is type of H.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200NetbiosNodeType

me1200DhcpServerConfigPoolNetbiosScope		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.23
NetBIOS scope. DHCP option 47. Specify the NetBIOS over TCP/IP scope parameter for the client as specified in RFC 1001/1002.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerConfigPoolNetbiosNameServer1		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.24
NetBIOS name server 1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNetbiosNameServer2		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.25
NetBIOS name server 2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNetbiosNameServer3		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.26
NetBIOS name server 3.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNetbiosNameServer4		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.27
NetBIOS name server 4.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNisDomainName		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.28
NIS Domain Name. DHCP option 40. Specify the name of the client's NIS domain.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerConfigPoolNisServer1		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.29
NIS server 1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNisServer2		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.30
NIS server 2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNisServer3		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.31
NIS server 3.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolNisServer4		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.32
NIS server 4.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolClientIdentifierType		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.33
Type of client identifier. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. none(0) means the client identifier type is not defined yet. fqdn(1) means the client identifier type is type of FQDN (Fully Qualified Domain Name). mac(2) means the client identifier type is type of MAC address.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200ClientIdentifierType

me1200DhcpServerConfigPoolClientIdentifierFqdn		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.34
Client's Fully Qualified Domain Name. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. This takes effect only if ClientIdentifierType is defined fqdn(1).
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerConfigPoolClientIdentifierMac		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.35
Client's MAC address. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. This takes effect only if ClientIdentifierType is defined as mac(2).
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

me1200DhcpServerConfigPoolClientHardwareAddress		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.36
Client's hardware address. Specify client's hardware(MAC) address to be used when the pool is the type of host.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

me1200DhcpServerConfigPoolClientName		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.37
Client name. DHCP option 12. Specify the name of client to be used when the pool is the type of host.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerConfigPoolVendorClassId1		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.38
Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerConfigPoolVendorSpecificInfo1		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.39
Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..66)

me1200DhcpServerConfigPoolVendorClassId2		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.40
Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerConfigPoolVendorSpecificInfo2		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.41
Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..66)

me1200DhcpServerConfigPoolVendorClassId3		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.42
Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerConfigPoolVendorSpecificInfo3		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.43
Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..66)

me1200DhcpServerConfigPoolVendorClassId4		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.44
Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerConfigPoolVendorSpecificInfo4		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.45
Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..66)

me1200DhcpServerConfigPoolAction		1.3.6.1.4.1.9.9.815.1.109.1.2.5.1.100
Action
Status: current	Access: read-write
OBJECT-TYPE
	ME1200RowEditorState

me1200DhcpServerConfigPoolTableRowEditor		1.3.6.1.4.1.9.9.815.1.109.1.2.6
OBJECT IDENTIFIER

me1200DhcpServerConfigPoolTableRowEditorPoolName		1.3.6.1.4.1.9.9.815.1.109.1.2.6.1
Name of DHCP pool.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerConfigPoolTableRowEditorPoolType		1.3.6.1.4.1.9.9.815.1.109.1.2.6.2
Type of pool. none(0) means the pool type is not defined yet. network(1) means the pool defines a pool of IP addresses to service more than one DHCP client. host(2) means the pool services for a specific DHCP client identified by client identifier or hardware address.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200PoolType

me1200DhcpServerConfigPoolTableRowEditorIpv4Address		1.3.6.1.4.1.9.9.815.1.109.1.2.6.3
Network number of the subnet. If the pool type is of network, the IP address can be any general IP address. If the pool type is of host, the IP address must be a unicast IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorSubnetMask		1.3.6.1.4.1.9.9.815.1.109.1.2.6.4
Subnet Mask. DHCP option 1. Specify subnet mask of the DHCP address pool, excluding 0.0.0.0 and 255.255.255.255.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorSubnetBroadcast		1.3.6.1.4.1.9.9.815.1.109.1.2.6.5
Broadcast IP address in the subnet. DHCP option 28. Specify the broadcast address in use on the client's subnet.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorLeaseDay		1.3.6.1.4.1.9.9.815.1.109.1.2.6.6
Number of days of lease time. DHCP option 51, 58 and 59. The value range is 0-365. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

me1200DhcpServerConfigPoolTableRowEditorLeaseHour		1.3.6.1.4.1.9.9.815.1.109.1.2.6.7
Number of hours of lease time. DHCP option 51, 58 and 59. The value range is 0-23. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

me1200DhcpServerConfigPoolTableRowEditorLeaseMinute		1.3.6.1.4.1.9.9.815.1.109.1.2.6.8
Number of minutes of lease time. DHCP option 51, 58 and 59. The value range is 0-59. Specify lease time that allows the client to request a lease time for the IP address. If all of LeaseDay, LeaseHour and LeaseMinute are 0's, then it means the lease time is infinite.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

me1200DhcpServerConfigPoolTableRowEditorDomainName		1.3.6.1.4.1.9.9.815.1.109.1.2.6.9
Domain name. DHCP option 15. Specify domain name that client should use when resolving hostname via DNS.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerConfigPoolTableRowEditorDefaultRouter1		1.3.6.1.4.1.9.9.815.1.109.1.2.6.10
Default router 1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorDefaultRouter2		1.3.6.1.4.1.9.9.815.1.109.1.2.6.11
Default router 2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorDefaultRouter3		1.3.6.1.4.1.9.9.815.1.109.1.2.6.12
Default router 3.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorDefaultRouter4		1.3.6.1.4.1.9.9.815.1.109.1.2.6.13
Default router 4.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorDnsServer1		1.3.6.1.4.1.9.9.815.1.109.1.2.6.14
DNS server 1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorDnsServer2		1.3.6.1.4.1.9.9.815.1.109.1.2.6.15
DNS server 2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorDnsServer3		1.3.6.1.4.1.9.9.815.1.109.1.2.6.16
DNS server 3.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorDnsServer4		1.3.6.1.4.1.9.9.815.1.109.1.2.6.17
DNS server 4.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNtpServer1		1.3.6.1.4.1.9.9.815.1.109.1.2.6.18
NTP server 1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNtpServer2		1.3.6.1.4.1.9.9.815.1.109.1.2.6.19
NTP server 2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNtpServer3		1.3.6.1.4.1.9.9.815.1.109.1.2.6.20
NTP server 3.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNtpServer4		1.3.6.1.4.1.9.9.815.1.109.1.2.6.21
NTP server 4.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNetbiosNodeType		1.3.6.1.4.1.9.9.815.1.109.1.2.6.22
Type of NetBIOS node. DHCP option 46. Specify NetBIOS node type option to allow Netbios over TCP/IP clients which are configurable to be configured as described in RFC 1001/1002. nodeNone(0) means the node type is not defined yet. nodeB(1) means the node type is type of B. nodeP(2) means the node type is type of P. nodeM(3) means the node type is type of M. nodeH(4) means the node type is type of H.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200NetbiosNodeType

me1200DhcpServerConfigPoolTableRowEditorNetbiosScope		1.3.6.1.4.1.9.9.815.1.109.1.2.6.23
NetBIOS scope. DHCP option 47. Specify the NetBIOS over TCP/IP scope parameter for the client as specified in RFC 1001/1002.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerConfigPoolTableRowEditorNetbiosNameServer1		1.3.6.1.4.1.9.9.815.1.109.1.2.6.24
NetBIOS name server 1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNetbiosNameServer2		1.3.6.1.4.1.9.9.815.1.109.1.2.6.25
NetBIOS name server 2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNetbiosNameServer3		1.3.6.1.4.1.9.9.815.1.109.1.2.6.26
NetBIOS name server 3.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNetbiosNameServer4		1.3.6.1.4.1.9.9.815.1.109.1.2.6.27
NetBIOS name server 4.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNisDomainName		1.3.6.1.4.1.9.9.815.1.109.1.2.6.28
NIS Domain Name. DHCP option 40. Specify the name of the client's NIS domain.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerConfigPoolTableRowEditorNisServer1		1.3.6.1.4.1.9.9.815.1.109.1.2.6.29
NIS server 1.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNisServer2		1.3.6.1.4.1.9.9.815.1.109.1.2.6.30
NIS server 2.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNisServer3		1.3.6.1.4.1.9.9.815.1.109.1.2.6.31
NIS server 3.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorNisServer4		1.3.6.1.4.1.9.9.815.1.109.1.2.6.32
NIS server 4.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerConfigPoolTableRowEditorClientIdentifierType		1.3.6.1.4.1.9.9.815.1.109.1.2.6.33
Type of client identifier. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. none(0) means the client identifier type is not defined yet. fqdn(1) means the client identifier type is type of FQDN (Fully Qualified Domain Name). mac(2) means the client identifier type is type of MAC address.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200ClientIdentifierType

me1200DhcpServerConfigPoolTableRowEditorClientIdentifierFqdn		1.3.6.1.4.1.9.9.815.1.109.1.2.6.34
Client's Fully Qualified Domain Name. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. This takes effect only if ClientIdentifierType is defined fqdn(1).
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerConfigPoolTableRowEditorClientIdentifierMac		1.3.6.1.4.1.9.9.815.1.109.1.2.6.35
Client's MAC address. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. This takes effect only if ClientIdentifierType is defined as mac(2).
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

me1200DhcpServerConfigPoolTableRowEditorClientHardwareAddress		1.3.6.1.4.1.9.9.815.1.109.1.2.6.36
Client's hardware address. Specify client's hardware(MAC) address to be used when the pool is the type of host.
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

me1200DhcpServerConfigPoolTableRowEditorClientName		1.3.6.1.4.1.9.9.815.1.109.1.2.6.37
Client name. DHCP option 12. Specify the name of client to be used when the pool is the type of host.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerConfigPoolTableRowEditorVendorClassId1		1.3.6.1.4.1.9.9.815.1.109.1.2.6.38
Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerConfigPoolTableRowEditorVendorSpecificInfo1		1.3.6.1.4.1.9.9.815.1.109.1.2.6.39
Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..66)

me1200DhcpServerConfigPoolTableRowEditorVendorClassId2		1.3.6.1.4.1.9.9.815.1.109.1.2.6.40
Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerConfigPoolTableRowEditorVendorSpecificInfo2		1.3.6.1.4.1.9.9.815.1.109.1.2.6.41
Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..66)

me1200DhcpServerConfigPoolTableRowEditorVendorClassId3		1.3.6.1.4.1.9.9.815.1.109.1.2.6.42
Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerConfigPoolTableRowEditorVendorSpecificInfo3		1.3.6.1.4.1.9.9.815.1.109.1.2.6.43
Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..66)

me1200DhcpServerConfigPoolTableRowEditorVendorClassId4		1.3.6.1.4.1.9.9.815.1.109.1.2.6.44
Vendor Class Identifier. DHCP option 60. Specify to be used by DHCP client to optionally identify the vendor type and configuration of a DHCP client. DHCP server will deliver the corresponding option 43 specific information to the client that sends option 60 vendor class identifier.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerConfigPoolTableRowEditorVendorSpecificInfo4		1.3.6.1.4.1.9.9.815.1.109.1.2.6.45
Vendor Specific Information. DHCP option 43. Specify vendor specific information corresponding to option 60 vendor class identifier. Therefore, the corresponding vendor class identifier must be defined before this specific information.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200DisplayString	Size(0..66)

me1200DhcpServerConfigPoolTableRowEditorAction		1.3.6.1.4.1.9.9.815.1.109.1.2.6.100
Action
Status: current	Access: read-write
OBJECT-TYPE
	ME1200RowEditorState

me1200DhcpServerStatus		1.3.6.1.4.1.9.9.815.1.109.1.3
OBJECT IDENTIFIER

me1200DhcpServerStatusDeclinedTable		1.3.6.1.4.1.9.9.815.1.109.1.3.1
This is a table of IP addresses declined by DHCP client.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ME1200DhcpServerStatusDeclinedEntry

me1200DhcpServerStatusDeclinedEntry		1.3.6.1.4.1.9.9.815.1.109.1.3.1.1
Each entry has a declined IP address.
Status: current	Access: not-accessible
OBJECT-TYPE
	ME1200DhcpServerStatusDeclinedEntry

me1200DhcpServerStatusDeclinedEntryNo		1.3.6.1.4.1.9.9.815.1.109.1.3.1.1.1
The number of entry. The number starts from 1.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..2147483647

me1200DhcpServerStatusDeclinedIpv4Address		1.3.6.1.4.1.9.9.815.1.109.1.3.1.1.2
IPv4 address declined by DHCP client.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

me1200DhcpServerStatusStatistics		1.3.6.1.4.1.9.9.815.1.109.1.3.2
OBJECT IDENTIFIER

me1200DhcpServerStatusStatisticsDiscoverCnt		1.3.6.1.4.1.9.9.815.1.109.1.3.2.1
Number of DHCP DISCOVER messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

me1200DhcpServerStatusStatisticsOfferCnt		1.3.6.1.4.1.9.9.815.1.109.1.3.2.2
Number of DHCP OFFER messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

me1200DhcpServerStatusStatisticsRequestCnt		1.3.6.1.4.1.9.9.815.1.109.1.3.2.3
Number of DHCP REQUEST messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

me1200DhcpServerStatusStatisticsAckCnt		1.3.6.1.4.1.9.9.815.1.109.1.3.2.4
Number of DHCP ACK messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

me1200DhcpServerStatusStatisticsNakCnt		1.3.6.1.4.1.9.9.815.1.109.1.3.2.5
Number of DHCP NAK messages sent.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

me1200DhcpServerStatusStatisticsDeclineCnt		1.3.6.1.4.1.9.9.815.1.109.1.3.2.6
Number of DHCP DECLINE messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

me1200DhcpServerStatusStatisticsReleaseCnt		1.3.6.1.4.1.9.9.815.1.109.1.3.2.7
Number of DHCP RELEASE messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

me1200DhcpServerStatusStatisticsInformCnt		1.3.6.1.4.1.9.9.815.1.109.1.3.2.8
Number of DHCP INFORM messages received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

me1200DhcpServerStatusBindingTable		1.3.6.1.4.1.9.9.815.1.109.1.3.3
This is a table of binding data.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ME1200DhcpServerStatusBindingEntry

me1200DhcpServerStatusBindingEntry		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1
Each entry has the binding data.
Status: current	Access: not-accessible
OBJECT-TYPE
	ME1200DhcpServerStatusBindingEntry

me1200DhcpServerStatusBindingIpAddress		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.1
IP address.
Status: current	Access: not-accessible
OBJECT-TYPE
	IpAddress

me1200DhcpServerStatusBindingState		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.2
State of binding. none(0) means the binding is not in use. allocated(1) means the binding is allocated to the new DHCP client who send DHCPDISCOVER. committed(2) means the binding is committed as the DHCP process is completed successfully. expired(3) means the lease of the binding expired.
Status: current	Access: read-only
OBJECT-TYPE
	ME1200BindingState

me1200DhcpServerStatusBindingType		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.3
Type of binding. none(0) means the binding is not in use. automatic(1) means the binding is mapped to network-type pool. manual(2) means the binding is mapped to host-type pool. expired(3) means the lease of the binding expired.
Status: current	Access: read-only
OBJECT-TYPE
	ME1200BindingType

me1200DhcpServerStatusBindingPoolName		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.4
Name of the pool that creates the binding.
Status: current	Access: read-only
OBJECT-TYPE
	ME1200DisplayString	Size(0..32)

me1200DhcpServerStatusBindingServerId		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.5
IP address of the DHCP server to service the binding.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

me1200DhcpServerStatusBindingVlanId		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.6
The VLAN where the binding works on.
Status: current	Access: read-only
OBJECT-TYPE
	ME1200Unsigned16

me1200DhcpServerStatusBindingSubnetMask		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.7
Subnet mask of the DHCP client.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

me1200DhcpServerStatusBindingClientIdentifierType		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.8
Type of client identifier. DHCP option 61. Specify client's unique identifier to be used when the pool is the type of host. none(0) means the client identifier type is not defined yet. fqdn(1) means the client identifier type is type of FQDN (Fully Qualified Domain Name). mac(2) means the client identifier type is type of MAC address.
Status: current	Access: read-only
OBJECT-TYPE
	ME1200ClientIdentifierType

me1200DhcpServerStatusBindingClientIdentifierFqdn		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.9
Client's Fully Qualified Domain Name. DHCP option 61.
Status: current	Access: read-only
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerStatusBindingClientIdentifierMac		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.10
Client's MAC address. DHCP option 61.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

me1200DhcpServerStatusBindingMacAddress		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.11
MAC address of the DHCP client.
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

me1200DhcpServerStatusBindingLease		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.12
Lease time of the binding.
Status: current	Access: read-only
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerStatusBindingTimeToExpire		1.3.6.1.4.1.9.9.815.1.109.1.3.3.1.13
remaining time to expire.
Status: current	Access: read-only
OBJECT-TYPE
	ME1200DisplayString	Size(0..64)

me1200DhcpServerControl		1.3.6.1.4.1.9.9.815.1.109.1.4
OBJECT IDENTIFIER

me1200DhcpServerControlStatistics		1.3.6.1.4.1.9.9.815.1.109.1.4.1
OBJECT IDENTIFIER

me1200DhcpServerControlStatisticsClear		1.3.6.1.4.1.9.9.815.1.109.1.4.1.1
Clear all statistics.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

me1200DhcpServerControlBinding		1.3.6.1.4.1.9.9.815.1.109.1.4.2
OBJECT IDENTIFIER

me1200DhcpServerControlBindingClearByIp		1.3.6.1.4.1.9.9.815.1.109.1.4.2.1
Clear binding with the IP address. If 0.0.0.0 then do nothing.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

me1200DhcpServerControlBindingClearByType		1.3.6.1.4.1.9.9.815.1.109.1.4.2.2
Clear binding by binding type. If none(0) then do nothing.
Status: current	Access: read-write
OBJECT-TYPE
	ME1200BindingType

me1200DhcpServerMIBConformance		1.3.6.1.4.1.9.9.815.1.109.2
OBJECT IDENTIFIER

me1200DhcpServerMIBCompliances		1.3.6.1.4.1.9.9.815.1.109.2.1
OBJECT IDENTIFIER

me1200DhcpServerMIBGroups		1.3.6.1.4.1.9.9.815.1.109.2.2
OBJECT IDENTIFIER

me1200DhcpServerConfigGlobalsInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.1
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerConfigVlanTableInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.2
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerConfigExcludedTableInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.3
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerConfigExcludedIpTableRowEditorInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.4
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerConfigPoolTableInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.5
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerConfigPoolTableRowEditorInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.6
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerStatusDeclinedTableInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.7
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerStatusStatisticsInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.8
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerStatusBindingTableInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.9
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerControlStatisticsInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.10
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerControlBindingInfoGroup		1.3.6.1.4.1.9.9.815.1.109.2.2.11
A collection of objects suitable for bulk operations.
Status: current	Access: read-write
OBJECT-GROUP

me1200DhcpServerMIBCompliance		1.3.6.1.4.1.9.9.815.1.109.2.1.1
The compliance statement for the implementation.
Status: current	Access: read-write
MODULE-COMPLIANCE