ME1200-LLDPMED-MIB

File: ME1200-LLDPMED-MIB.mib (62792 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CISCOME1200-MIB ME1200-TC

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE TEXTUAL-CONVENTION me1200SwitchMgmt
ME1200DisplayString ME1200Integer64 ME1200InterfaceIndex
ME1200RowEditorState ME1200Unsigned16 ME1200Unsigned8
Integer32 TruthValue

Defined Types

ME1200lldpmedAltitudeType  
This enumerations the altitude type.
TEXTUAL-CONVENTION    
  INTEGER meters(1), floor(2)  

ME1200lldpmedDatumType  
This enumerations the datum (geodetic system).
TEXTUAL-CONVENTION    
  INTEGER wgs84(1), nad83navd88(2), nad83mllw(3)  

ME1200lldpmedDeviceType  
This enumerations the device type that the device shall operate as.
TEXTUAL-CONVENTION    
  INTEGER connectivity(0), endpoint(1)  

ME1200lldpmedRemoteDeviceType  
This enumerations the remote neighbor's device type.
TEXTUAL-CONVENTION    
  INTEGER notDefined(0), endpointClassI(1), endpointClassII(2), endpointClassIII(3), networkConnectivity(4), reserved(5)  

ME1200lldpmedRemoteNetworkPolicyApplicationType  
This enumerations the remote neighbor's network policy's application type.
TEXTUAL-CONVENTION    
  INTEGER voice(1), voiceSignaling(2), guestVoice(3), gustVoiceSignaling(4), softphoneVoice(5), videoConferencing(6), streamingVideo(7), videoSignaling(8)  

ME1200LldpmedConfigEntry  
SEQUENCE    
  me1200LldpmedConfigIfIndex ME1200InterfaceIndex
  me1200LldpmedConfigOptionalTlvs ME1200Unsigned8
  me1200LldpmedConfigDeviceType ME1200lldpmedDeviceType

ME1200LldpmedConfigPolicyEntry  
SEQUENCE    
  me1200LldpmedConfigPolicyLldpmedPolicy Integer32
  me1200LldpmedConfigPolicyApplicationType ME1200lldpmedRemoteNetworkPolicyApplicationType
  me1200LldpmedConfigPolicyTagged TruthValue
  me1200LldpmedConfigPolicyVlanId ME1200Unsigned16
  me1200LldpmedConfigPolicyL2Priority ME1200Unsigned8
  me1200LldpmedConfigPolicyDscp ME1200Unsigned8
  me1200LldpmedConfigPolicyAction ME1200RowEditorState

ME1200LldpmedConfigPolicyListEntry  
SEQUENCE    
  me1200LldpmedConfigPolicyListIfIndex ME1200InterfaceIndex
  me1200LldpmedConfigPolicyListPolicyIndex Integer32
  me1200LldpmedConfigPolicyListLldpmedPoliciesList TruthValue

ME1200LldpmedStatusRemoteDeviceInfoEntry  
SEQUENCE    
  me1200LldpmedStatusRemoteDeviceInfoIfIndex ME1200InterfaceIndex
  me1200LldpmedStatusRemoteDeviceInfoLldpmedIndex Integer32
  me1200LldpmedStatusRemoteDeviceInfoCapabilities ME1200Unsigned16
  me1200LldpmedStatusRemoteDeviceInfoCapabilitiesEnabled ME1200Unsigned16
  me1200LldpmedStatusRemoteDeviceInfoLatitude ME1200Integer64
  me1200LldpmedStatusRemoteDeviceInfoLongitude ME1200Integer64
  me1200LldpmedStatusRemoteDeviceInfoAltitudeType ME1200lldpmedAltitudeType
  me1200LldpmedStatusRemoteDeviceInfoAltitude Integer32
  me1200LldpmedStatusRemoteDeviceInfoDatum ME1200lldpmedDatumType
  me1200LldpmedStatusRemoteDeviceInfoElinAddr ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceInfoDeviceType ME1200lldpmedRemoteDeviceType
  me1200LldpmedStatusRemoteDeviceInfoHwRev ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceInfoFwRev ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceInfoSwRev ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceInfoSerialNo ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceInfoManufacturerName ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceInfoModelName ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceInfoAssetId ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSys ME1200Unsigned16
  me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSys ME1200Unsigned16
  me1200LldpmedStatusRemoteDeviceInfoEeeFbTwSys ME1200Unsigned16
  me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSysEcho ME1200Unsigned16
  me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSysEcho ME1200Unsigned16

ME1200LldpmedStatusRemoteDeviceLocInfoEntry  
SEQUENCE    
  me1200LldpmedStatusRemoteDeviceLocInfoIfIndex ME1200InterfaceIndex
  me1200LldpmedStatusRemoteDeviceLocInfoLldpmedIndex Integer32
  me1200LldpmedStatusRemoteDeviceLocInfoState ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoCounty ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoCity ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoCityDistrict ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoBlock ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoStreet ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoLeadingStreetDirection ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoTrailingStreetSuffix ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoStreetSuffix ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoHouseNo ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoHouseNoSuffix ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoLandmark ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoAdditionalInfo ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoName ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoZipCode ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoBuilding ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoApartment ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoFloor ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoRoomNumber ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoPlaceType ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoPostalCommunityName ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoPoBox ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoAdditionalCode ME1200DisplayString
  me1200LldpmedStatusRemoteDeviceLocInfoCountryCode ME1200DisplayString

ME1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry  
SEQUENCE    
  me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoIfIndex ME1200InterfaceIndex
  me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoLldpmedIndex Integer32
  me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoPolicyIndex Integer32
  me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoApplicationType ME1200lldpmedRemoteNetworkPolicyApplicationType
  me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoUnknownPolicy TruthValue
  me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTagged TruthValue
  me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoVlanId ME1200Unsigned16
  me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoL2Priority ME1200Unsigned8
  me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoDscp ME1200Unsigned8

Defined Values

me1200LldpmedMib 1.3.6.1.4.1.9.9.815.1.71
This is a private version of the LLDPMED MIB
MODULE-IDENTITY    

me1200LldpmedMibObjects 1.3.6.1.4.1.9.9.815.1.71.1
OBJECT IDENTIFIER    

me1200LldpmedConfig 1.3.6.1.4.1.9.9.815.1.71.1.2
OBJECT IDENTIFIER    

me1200LldpmedConfigGlobal 1.3.6.1.4.1.9.9.815.1.71.1.2.1
OBJECT IDENTIFIER    

me1200LldpmedConfigGlobalFastRepeatCount 1.3.6.1.4.1.9.9.815.1.71.1.2.1.1
Number of times to repeat LLDP frame transmission at fast start Rapid startup and Emergency Call Service Location Identification Discovery of endpoints is a critically important aspect of VoIP systems in general. In addition, it is best to advertise only those pieces of information which are specifically relevant to particular endpoint types (for example only advertise the voice network policy to permitted voice-capable devices), both in order to conserve the limited LLDPU space and to reduce security and system integrity issues that can come with inappropriate knowledge of the network policy. With this in mind LLDP-MED defines an LLDP-MED Fast Start interaction between the protocol and the application layers on top of the protocol, in order to achieve these related properties. Initially, a Network Connectivity Device will only transmit LLDP TLVs in an LLDPDU. Only after an LLDP-MED Endpoint Device is detected, will an LLDP-MED capable Network Connectivity Device start to advertise LLDP-MED TLVs in outgoing LLDPDUs on the associated port. The LLDP-MED application will temporarily speed up the transmission of the LLDPDU to start within a second, when a new LLDP-MED neighbor has been detected in order share LLDP-MED information as fast as possible to new neighbors. Because there is a risk of an LLDP frame being lost during transmission between neighbors, it is recommended to repeat the fast start transmission multiple times to increase the possibility of the neighbors receiving the LLDP frame. With fast start repeat count it is possible to specify the number of times the fast start transmission would be repeated. The recommended value is 4 times, given that 4 LLDP frames with a 1 second interval will be transmitted, when an LLDP frame with new information is received. It should be noted that LLDP-MED and the LLDP-MED Fast Start mechanism is only intended to run on links between LLDP-MED Network Connectivity Devices and Endpoint Devices, and as such does not apply to links between LAN infrastructure elements, including Network Connectivity Devices, or other types of links.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned8 1..10  

me1200LldpmedConfigGlobalLatitude 1.3.6.1.4.1.9.9.815.1.71.1.2.1.2
Latitude degrees in 2s-complement as specified in RFC 3825. Positive numbers are north of the equator and negative numbers are south of the equator.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Integer64  

me1200LldpmedConfigGlobalLongitude 1.3.6.1.4.1.9.9.815.1.71.1.2.1.3
Longitude degrees in 2s-complement as specified in RFC 3825. Positive values are East of the prime meridian and negative numbers are West of the prime meridian.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Integer64  

me1200LldpmedConfigGlobalAltitudeType 1.3.6.1.4.1.9.9.815.1.71.1.2.1.4
Setting altitude type Possible to select between two altitude types (floors or meters). Meters are representing meters of altitude defined by the vertical datum specified. Floors are representing altitude in a form more relevant in buildings which have different floor-to-floor dimensions. An altitude = 0.0 is meaningful even outside a building, and represents ground level at the given latitude and longitude. Inside a building, 0.0 represents the floor level associated with ground level at the main entrance.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200lldpmedAltitudeType  

me1200LldpmedConfigGlobalAltitude 1.3.6.1.4.1.9.9.815.1.71.1.2.1.5
Altitude value in 2s-complement as specified in RFC 3825
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

me1200LldpmedConfigGlobalElinAddr 1.3.6.1.4.1.9.9.815.1.71.1.2.1.6
Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. This format consists of a numerical digit string, corresponding to the ELIN to be used for emergency calling. Maximum number of octets are 25.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..25)  

me1200LldpmedConfigGlobalDatum 1.3.6.1.4.1.9.9.815.1.71.1.2.1.7
Setting datum to configure the datum (geodetic system) to use. The Map Datum is used for the coordinates given in these options: WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327, Prime Meridian Name: Greenwich. NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich;The associated vertical datum is the North American Vertical Datum of 1988 (NAVD88).This datum pair is to be used when referencing locations on land, not near tidal water(which would use Datum = NAD83/MLLW). NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich; The associated vertical datum is Mean Lower Low Water (MLLW). This datum pair is to be used when referencing locations on water/sea/ocean.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200lldpmedDatumType  

me1200LldpmedConfigLocationInformation 1.3.6.1.4.1.9.9.815.1.71.1.2.2
OBJECT IDENTIFIER    

me1200LldpmedConfigLocationInformationState 1.3.6.1.4.1.9.9.815.1.71.1.2.2.1
National subdivision
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationCounty 1.3.6.1.4.1.9.9.815.1.71.1.2.2.2
County
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationCity 1.3.6.1.4.1.9.9.815.1.71.1.2.2.3
City
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationCityDistrict 1.3.6.1.4.1.9.9.815.1.71.1.2.2.4
City district
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationBlock 1.3.6.1.4.1.9.9.815.1.71.1.2.2.5
Block (Neighborhood)
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationStreet 1.3.6.1.4.1.9.9.815.1.71.1.2.2.6
Street
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationLeadingStreetDirection 1.3.6.1.4.1.9.9.815.1.71.1.2.2.7
Street Direction
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationTrailingStreetSuffix 1.3.6.1.4.1.9.9.815.1.71.1.2.2.8
Trailling Street
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationStreetSuffix 1.3.6.1.4.1.9.9.815.1.71.1.2.2.9
Street Suffix
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationHouseNo 1.3.6.1.4.1.9.9.815.1.71.1.2.2.10
House No.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationHouseNoSuffix 1.3.6.1.4.1.9.9.815.1.71.1.2.2.11
House No. Suffix
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationLandmark 1.3.6.1.4.1.9.9.815.1.71.1.2.2.12
Landmark
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationAdditionalInfo 1.3.6.1.4.1.9.9.815.1.71.1.2.2.13
Additional Location Info
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationName 1.3.6.1.4.1.9.9.815.1.71.1.2.2.14
Name
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationZipCode 1.3.6.1.4.1.9.9.815.1.71.1.2.2.15
Zip Code
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationBuilding 1.3.6.1.4.1.9.9.815.1.71.1.2.2.16
Building
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationApartment 1.3.6.1.4.1.9.9.815.1.71.1.2.2.17
Unit
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationFloor 1.3.6.1.4.1.9.9.815.1.71.1.2.2.18
Floor
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationRoomNumber 1.3.6.1.4.1.9.9.815.1.71.1.2.2.19
Room No.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationPlaceType 1.3.6.1.4.1.9.9.815.1.71.1.2.2.20
Placetype
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationPostalCommunityName 1.3.6.1.4.1.9.9.815.1.71.1.2.2.21
Postal Community Name
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationPoBox 1.3.6.1.4.1.9.9.815.1.71.1.2.2.22
P.O. Box
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationAdditionalCode 1.3.6.1.4.1.9.9.815.1.71.1.2.2.23
Addination Code
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedConfigLocationInformationCountryCode 1.3.6.1.4.1.9.9.815.1.71.1.2.2.24
The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE or US.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200DisplayString Size(0..2)  

me1200LldpmedConfigTable 1.3.6.1.4.1.9.9.815.1.71.1.2.3
This is a table to configure LLDP MEDIA configurations for a specific interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ME1200LldpmedConfigEntry

me1200LldpmedConfigEntry 1.3.6.1.4.1.9.9.815.1.71.1.2.3.1
Each port has a set of control parameters
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200LldpmedConfigEntry  

me1200LldpmedConfigIfIndex 1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.1
Logical interface number.
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200InterfaceIndex  

me1200LldpmedConfigOptionalTlvs 1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.3
Enables/Disables the LLDP optional TLVs. Bit mask, where setting the bit(1) to 1 means enable the optional TLV. Bit 0 represents the capabilities TLV. Bit 1 represents the network Policy TLV. Bit 2 represents the location TLV. Bit 3 represents the PoE TLV.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned8 0..15  

me1200LldpmedConfigDeviceType 1.3.6.1.4.1.9.9.815.1.71.1.2.3.1.4
Setting device type to configure the mode the device shall operate as.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200lldpmedDeviceType  

me1200LldpmedConfigPolicyTable 1.3.6.1.4.1.9.9.815.1.71.1.2.4
This is a table to configure LLDP MED Policies for the device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ME1200LldpmedConfigPolicyEntry

me1200LldpmedConfigPolicyEntry 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1
Network Policy Discovery enables the efficient discovery and diagnosis of mismatch issues with the VLAN configuration, along with the associated Layer 2 and Layer 3 attributes, which apply for a set of specific protocol applications on that port. Improper network policy configurations are a very significant issue in VoIP environments that frequently result in voice quality degradation or loss of service. Policies are only intended for use with applications that have specific 'real-time' network policy requirements, such as interactive voice and/or video services.
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200LldpmedConfigPolicyEntry  

me1200LldpmedConfigPolicyLldpmedPolicy 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.1
Policy index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..31  

me1200LldpmedConfigPolicyApplicationType 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.2
The LLDP policy application type.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200lldpmedRemoteNetworkPolicyApplicationType  

me1200LldpmedConfigPolicyTagged 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.3
Defines if LLDP policy uses tagged VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200LldpmedConfigPolicyVlanId 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.4
The policy VLAN ID. Only valid when policy 'Tagged' is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned16 1..4095  

me1200LldpmedConfigPolicyL2Priority 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.5
Shows the LLDP neighbor's policy L2 priority. Only valid when policy 'Tagged' is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned8 0..7  

me1200LldpmedConfigPolicyDscp 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.6
LLDP policy DSCP.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned8 0..63  

me1200LldpmedConfigPolicyAction 1.3.6.1.4.1.9.9.815.1.71.1.2.4.1.100
Action
Status: current Access: read-write
OBJECT-TYPE    
  ME1200RowEditorState  

me1200LldpmedConfigPolicyListTable 1.3.6.1.4.1.9.9.815.1.71.1.2.5
Each interface can be mapped to multiple policies. Set to TRUE in order to enable the corresponding policy to be transmitted at the interface. It is a requirement that the policy is defined.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ME1200LldpmedConfigPolicyListEntry

me1200LldpmedConfigPolicyListEntry 1.3.6.1.4.1.9.9.815.1.71.1.2.5.1
Each location information has a control parameter
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200LldpmedConfigPolicyListEntry  

me1200LldpmedConfigPolicyListIfIndex 1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.1
Logical interface number.
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200InterfaceIndex  

me1200LldpmedConfigPolicyListPolicyIndex 1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.2
Logical Policy index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

me1200LldpmedConfigPolicyListLldpmedPoliciesList 1.3.6.1.4.1.9.9.815.1.71.1.2.5.1.3
Set to TRUE assign the corresponding policy index to the interface.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200LldpmedConfigPolicyRowEditor 1.3.6.1.4.1.9.9.815.1.71.1.2.6
OBJECT IDENTIFIER    

me1200LldpmedConfigPolicyRowEditorLldpmedPolicy 1.3.6.1.4.1.9.9.815.1.71.1.2.6.1
Policy index.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..31  

me1200LldpmedConfigPolicyRowEditorApplicationType 1.3.6.1.4.1.9.9.815.1.71.1.2.6.2
The LLDP policy application type.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200lldpmedRemoteNetworkPolicyApplicationType  

me1200LldpmedConfigPolicyRowEditorTagged 1.3.6.1.4.1.9.9.815.1.71.1.2.6.3
Defines if LLDP policy uses tagged VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200LldpmedConfigPolicyRowEditorVlanId 1.3.6.1.4.1.9.9.815.1.71.1.2.6.4
The policy VLAN ID. Only valid when policy 'Tagged' is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned16 1..4095  

me1200LldpmedConfigPolicyRowEditorL2Priority 1.3.6.1.4.1.9.9.815.1.71.1.2.6.5
Shows the LLDP neighbor's policy L2 priority. Only valid when policy 'Tagged' is TRUE.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned8 0..7  

me1200LldpmedConfigPolicyRowEditorDscp 1.3.6.1.4.1.9.9.815.1.71.1.2.6.6
LLDP policy DSCP.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned8 0..63  

me1200LldpmedConfigPolicyRowEditorAction 1.3.6.1.4.1.9.9.815.1.71.1.2.6.100
Action
Status: current Access: read-write
OBJECT-TYPE    
  ME1200RowEditorState  

me1200LldpmedStatus 1.3.6.1.4.1.9.9.815.1.71.1.3
OBJECT IDENTIFIER    

me1200LldpmedStatusRemoteDeviceInfoTable 1.3.6.1.4.1.9.9.815.1.71.1.3.3
This is a table to show the LLDP-MED remote device (neighbor) information for a specific interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ME1200LldpmedStatusRemoteDeviceInfoEntry

me1200LldpmedStatusRemoteDeviceInfoEntry 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1
Each port has a set of neighbor's information
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200LldpmedStatusRemoteDeviceInfoEntry  

me1200LldpmedStatusRemoteDeviceInfoIfIndex 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.1
Logical interface number.
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200InterfaceIndex  

me1200LldpmedStatusRemoteDeviceInfoLldpmedIndex 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.2
Neighbor information table entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..192  

me1200LldpmedStatusRemoteDeviceInfoCapabilities 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.4
LLDP neighbor's capabilities bit mask. Bit 0 represents LLDP-MED capabilities. Bit 1 represents Network Policy. Bit 2 represents Location Identification. Bit 3 represents Extended Power via MDI - PSE. Bit 4 represents Extended Power via MDI - PD Bit 5 represents Inventory
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Unsigned16  

me1200LldpmedStatusRemoteDeviceInfoCapabilitiesEnabled 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.5
LLDP neighbor's capabilities bit mask for the capabilities which are currently enabled. Bit 0 represents LLDP-MED capabilities. Bit 1 represents Network Policy. Bit 2 represents Location Identification. Bit 3 represents Extended Power via MDI - PSE. Bit 4 represents Extended Power via MDI - PD Bit 5 represents Inventory
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Unsigned16  

me1200LldpmedStatusRemoteDeviceInfoLatitude 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.6
Latitude degrees in 2s-complement as specified in RFC 3825. Positive numbers are north of the equator and negative numbers are south of the equator.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Integer64  

me1200LldpmedStatusRemoteDeviceInfoLongitude 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.7
Longitude degrees in 2s-complement as specified in RFC 3825. Positive values are East of the prime meridian and negative numbers are West of the prime meridian.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Integer64  

me1200LldpmedStatusRemoteDeviceInfoAltitudeType 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.8
Altitude type as either floors or meters. Meters are representing meters of altitude defined by the vertical datum specified. Floors are representing altitude in a form more relevant in buildings which have different floor-to-floor dimensions. An altitude = 0.0 is meaningful even outside a building, and represents ground level at the given latitude and longitude. Inside a building, 0.0 represents the floor level associated with ground level at the main entrance.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200lldpmedAltitudeType  

me1200LldpmedStatusRemoteDeviceInfoAltitude 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.9
Altitude value in 2s-complement as specified in RFC 3825
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

me1200LldpmedStatusRemoteDeviceInfoDatum 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.10
Datum (geodetic system) . The Map Datum is used for the coordinates given in these options: WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327, Prime Meridian Name: Greenwich. NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich; The associated vertical datum is the North American Vertical Datum of 1988 (NAVD88). This datum pair is to be used when referencing locations on land, not near tidal water(which would use Datum = NAD83/MLLW). NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian Name: Greenwich; The associated vertical datum is Mean Lower Low Water (MLLW). This datum pair is to be used when referencing locations on water/sea/ocean.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200lldpmedDatumType  

me1200LldpmedStatusRemoteDeviceInfoElinAddr 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.12
Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. This format consists of a numerical digit string, corresponding to the ELIN to be used for emergency calling. Maximum number of octets are 25.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..25)  

me1200LldpmedStatusRemoteDeviceInfoDeviceType 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.13
Shows the LLDP neighbor's device type.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200lldpmedRemoteDeviceType  

me1200LldpmedStatusRemoteDeviceInfoHwRev 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.14
Shows the LLDP neighbor's hardware revision.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..31)  

me1200LldpmedStatusRemoteDeviceInfoFwRev 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.15
Shows the LLDP neighbor's firmware revision.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..31)  

me1200LldpmedStatusRemoteDeviceInfoSwRev 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.16
Shows the LLDP neighbor's software revision.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..31)  

me1200LldpmedStatusRemoteDeviceInfoSerialNo 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.17
Shows the LLDP neighbor's serial number.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..31)  

me1200LldpmedStatusRemoteDeviceInfoManufacturerName 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.18
Shows the LLDP neighbor's manufacturer name.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..31)  

me1200LldpmedStatusRemoteDeviceInfoModelName 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.19
Shows the LLDP neighbor's model name.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..31)  

me1200LldpmedStatusRemoteDeviceInfoAssetId 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.20
Shows the LLDP neighbor's asset id.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..31)  

me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSys 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.21
Shows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as the time (expressed in microseconds) that the transmitting link partner will wait before it starts transmitting data after leaving the Low Power Idle (LPI) mode. Section 79.3.5.2, IEEE802.3az.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Unsigned16  

me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSys 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.22
Shows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as the time (expressed in microseconds) that the receiving link partner is requesting the transmitting link partner to wait before starting the transmission data following the Low Power Idle (LPI) mode. Section 79.3.5.1, IEEE802.3az.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Unsigned16  

me1200LldpmedStatusRemoteDeviceInfoEeeFbTwSys 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.23
Shows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner may inform the transmitter of an alternate desired Tw_sys_tx. Since a receiving link partner is likely to have discrete levels for savings, this provides the transmitter with additional information that it may use for a more efficient allocation. Section 79.3.5.3, IEEE802.3az.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Unsigned16  

me1200LldpmedStatusRemoteDeviceInfoEeeTxTwSysEcho 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.24
Shows the LLDP neighbor's echo transmit Tw. The respective echo values shall be defined as the local link partners reflection (echo) of the remote link partners respective values. When a local link partner receives its echoed values from the remote link partner it can determine whether or not the remote link partner has received, registered, and processed its most recent values. Section 79.3.5.4, IEEE802.3az.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Unsigned16  

me1200LldpmedStatusRemoteDeviceInfoEeeRxTwSysEcho 1.3.6.1.4.1.9.9.815.1.71.1.3.3.1.25
Shows the LLDP neighbor's echo receive Tw. The respective echo values shall be defined as the local link partners reflection (echo) of the remote link partners respective values. When a local link partner receives its echoed values from the remote link partner it can determine whether or not the remote link partner has received, registered, and processed its most recent values. Section 79.3.5.4, IEEE802.3az.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Unsigned16  

me1200LldpmedStatusRemoteDeviceLocInfoTable 1.3.6.1.4.1.9.9.815.1.71.1.3.4
This is a table to show the LLDP-MED remote device (neighbor) civic location information for a specific interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ME1200LldpmedStatusRemoteDeviceLocInfoEntry

me1200LldpmedStatusRemoteDeviceLocInfoEntry 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1
Each port has a set of neighbors information
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200LldpmedStatusRemoteDeviceLocInfoEntry  

me1200LldpmedStatusRemoteDeviceLocInfoIfIndex 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.1
Logical interface number.
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200InterfaceIndex  

me1200LldpmedStatusRemoteDeviceLocInfoLldpmedIndex 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.2
Neighbor information table entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..192  

me1200LldpmedStatusRemoteDeviceLocInfoState 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.5
National subdivision
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoCounty 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.6
County
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoCity 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.7
City
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoCityDistrict 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.8
City district
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoBlock 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.9
Block (Neighborhood)
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoStreet 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.10
Street
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoLeadingStreetDirection 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.11
Street Direction
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoTrailingStreetSuffix 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.12
Trailling Street
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoStreetSuffix 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.13
Street Suffix
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoHouseNo 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.14
House No.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoHouseNoSuffix 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.15
House No. Suffix
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoLandmark 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.16
Landmark
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoAdditionalInfo 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.17
Additional Location Info
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoName 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.18
Name
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoZipCode 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.19
Zip Code
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoBuilding 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.20
Building
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoApartment 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.21
Unit
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoFloor 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.22
Floor
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoRoomNumber 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.23
Room No.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoPlaceType 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.24
Placetype
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoPostalCommunityName 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.25
Postal Community Name
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoPoBox 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.26
P.O. Box
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoAdditionalCode 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.27
Addination Code
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..250)  

me1200LldpmedStatusRemoteDeviceLocInfoCountryCode 1.3.6.1.4.1.9.9.815.1.71.1.3.4.1.28
The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE or US.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200DisplayString Size(0..2)  

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTable 1.3.6.1.4.1.9.9.815.1.71.1.3.5
This is a table to show the LLDP-MED remote device (neighbor) network policies information for a specific interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ME1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1
Each port has a set of neighbors information
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200LldpmedStatusRemoteDeviceNetworkPolicyInfoEntry  

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoIfIndex 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.1
Logical interface number.
Status: current Access: not-accessible
OBJECT-TYPE    
  ME1200InterfaceIndex  

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoLldpmedIndex 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.2
Neighbor information table entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..192  

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoPolicyIndex 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.3
Logical Policy index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoApplicationType 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.5
The LLDP policy application type.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200lldpmedRemoteNetworkPolicyApplicationType  

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoUnknownPolicy 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.6
Policy indicates that an Endpoint Device wants to explicitly advertise that the policy is required by the device. Can be either Defined or Unknown Unknown: The network policy for the specified application type is currently unknown. Defined: The network policy is defined (known).
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoTagged 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.7
Defines if LLDP policy uses tagged VLAN.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoVlanId 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.8
The policy VLAN ID. Only valid when policy 'Tagged' is TRUE.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Unsigned16 1..4095  

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoL2Priority 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.9
Shows the LLDP neighbor's policy L2 priority. Only valid when policy 'Tagged' is TRUE.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Unsigned8 0..7  

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoDscp 1.3.6.1.4.1.9.9.815.1.71.1.3.5.1.10
LLDP policy DSCP.
Status: current Access: read-only
OBJECT-TYPE    
  ME1200Unsigned8 0..63  

me1200LldpmedControl 1.3.6.1.4.1.9.9.815.1.71.1.4
OBJECT IDENTIFIER    

me1200LldpmedMibConformance 1.3.6.1.4.1.9.9.815.1.71.2
OBJECT IDENTIFIER    

me1200LldpmedMibCompliances 1.3.6.1.4.1.9.9.815.1.71.2.1
OBJECT IDENTIFIER    

me1200LldpmedMibGroups 1.3.6.1.4.1.9.9.815.1.71.2.2
OBJECT IDENTIFIER    

me1200LldpmedConfigGlobalInfoGroup 1.3.6.1.4.1.9.9.815.1.71.2.2.1
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

me1200LldpmedConfigLocationInformationInfoGroup 1.3.6.1.4.1.9.9.815.1.71.2.2.2
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

me1200LldpmedConfigInfoGroup 1.3.6.1.4.1.9.9.815.1.71.2.2.3
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

me1200LldpmedConfigPolicyInfoGroup 1.3.6.1.4.1.9.9.815.1.71.2.2.4
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

me1200LldpmedConfigPolicyListInfoGroup 1.3.6.1.4.1.9.9.815.1.71.2.2.5
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

me1200LldpmedConfigPolicyRowEditorInfoGroup 1.3.6.1.4.1.9.9.815.1.71.2.2.6
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

me1200LldpmedStatusRemoteDeviceInfoInfoGroup 1.3.6.1.4.1.9.9.815.1.71.2.2.7
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

me1200LldpmedStatusRemoteDeviceLocInfoInfoGroup 1.3.6.1.4.1.9.9.815.1.71.2.2.8
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

me1200LldpmedStatusRemoteDeviceNetworkPolicyInfoInfoGroup 1.3.6.1.4.1.9.9.815.1.71.2.2.9
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

me1200LldpmedMibCompliance 1.3.6.1.4.1.9.9.815.1.71.2.1.1
The compliance statement for the implementation.
Status: current Access: read-only
MODULE-COMPLIANCE