ME1200-UPNP-MIB

File: ME1200-UPNP-MIB.mib (3741 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CISCOME1200-MIB ME1200-TC

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE TEXTUAL-CONVENTION me1200SwitchMgmt
ME1200Unsigned8 Integer32 TruthValue

Defined Values

me1200UpnpMib 1.3.6.1.4.1.9.9.815.1.52
This is a private version of UPnP
MODULE-IDENTITY    

me1200UpnpMibObjects 1.3.6.1.4.1.9.9.815.1.52.1
OBJECT IDENTIFIER    

me1200UpnpConfig 1.3.6.1.4.1.9.9.815.1.52.1.2
OBJECT IDENTIFIER    

me1200UpnpConfigGlobals 1.3.6.1.4.1.9.9.815.1.52.1.2.1
OBJECT IDENTIFIER    

me1200UpnpConfigGlobalsMode 1.3.6.1.4.1.9.9.815.1.52.1.2.1.1
Global mode of UPnP. true(1) is to enable the functions of HTTPS and false(2) is to disable it.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

me1200UpnpConfigGlobalsTtl 1.3.6.1.4.1.9.9.815.1.52.1.2.1.2
The TTL value is used by UPnP to send SSDP advertisement messages.Valid values are in the range 1 to 255.
Status: current Access: read-write
OBJECT-TYPE    
  ME1200Unsigned8 1..255  

me1200UpnpConfigGlobalsAdvertisingDuration 1.3.6.1.4.1.9.9.815.1.52.1.2.1.3
The duration, carried in SSDP packets, is used to inform a control point or control points how often it or they should receive an SSDP advertisement message from this switch. If a control point does not receive any message within the duration, it will think that the switch no longer exists. Due to the unreliable nature of UDP, in the standard it is recommended that such refreshing of advertisements to be done at less than one-half of the advertising duration. In the implementation, the switch sends SSDP messages periodically at the interval one-half of the advertising duration minus 30 seconds. Valid values are in the range 100 to 86400.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 100..86400  

me1200UpnpMibConformance 1.3.6.1.4.1.9.9.815.1.52.2
OBJECT IDENTIFIER    

me1200UpnpMibCompliances 1.3.6.1.4.1.9.9.815.1.52.2.1
OBJECT IDENTIFIER    

me1200UpnpMibGroups 1.3.6.1.4.1.9.9.815.1.52.2.2
OBJECT IDENTIFIER    

me1200UpnpConfigGlobalsInfoGroup 1.3.6.1.4.1.9.9.815.1.52.2.2.1
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

me1200UpnpMibCompliance 1.3.6.1.4.1.9.9.815.1.52.2.1.1
The compliance statement for the implementation.
Status: current Access: read-write
MODULE-COMPLIANCE