MEMOTECADMIN-MIB
File:
MEMOTECADMIN-MIB.mib (17926 bytes)
Imported modules
Imported symbols
Defined Types
MemotecSecurityEntry |
|
SEQUENCE |
|
|
|
|
memotecSecurityLevelIndex |
INTEGER |
|
|
memotecSecurityViewIndex |
INTEGER |
|
|
memotecSecurityView |
OBJECT IDENTIFIER |
|
|
memotecSecurityRowStatus |
INTEGER |
|
MemotecTrapEntry |
|
SEQUENCE |
|
|
|
|
memotecTrapIndex |
INTEGER |
|
|
memotecTrapNetAddress |
IpAddress |
|
|
memotecTrapCommunity |
DisplayString |
|
|
memotecTrapRowStatus |
INTEGER |
|
Defined Values
memotecAdminViewInacTimer |
1.3.6.1.4.1.495.3.2 |
THE CX900 DOES NOT SUPPORT THIS OBJECT.
Determines the length of time, in minutes, that an SNMP session can remain
inactive before the system logs out the user. Once the timer expires, the
user needs to log in again to regain access to the SNMP agent.
The setting of this object is dynamic. The system immediately implements
the value you enter.
Range of Values: a maximum of 5 digits from 5 to 65535
Default Value: 30 |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
5..65535 |
|
memotecAdminAgentInterfaceAlias |
1.3.6.1.4.1.495.3.3 |
THE CX900 DOES NOT SUPPORT THIS OBJECT.
Determines the textual name the network administrator assigns to the SNMP
Agent.
The setting of this object is dynamic. The system immediately implements
the name you enter.
Range of Values: from 0 to 32 alphanumeric characters. You can use any
combination of letters and numbers however, you cannot use blank spaces.
Use a dash or underscore as a delimiter.
Default Value: none |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Alias |
|
|
memotecAdminStatisticsHeartBeat |
1.3.6.1.4.1.495.3.4 |
THE CX900 DOES NOT SUPPORT THIS OBJECT.
Determines the length of time, in seconds, after which the system
refreshes its SNMP statistics for each module.
The setting of this object is dynamic. The system immediately implements
the value you enter.
Range of Values: a maximum of 5 digits from 1 to 65535
Default Value: 15 |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
memotecAdminCardAliveHeartBeat |
1.3.6.1.4.1.495.3.5 |
THE CX900 DOES NOT SUPPORT THIS OBJECT.
Determines the length of time, in seconds, after which the system checks
too see if each module is alive.
The setting of this object is dynamic. The system immediately implements
the value you enter.
Range of Values: a maximum of 5 digits from 1 to 65535
Default Value: 15 |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
memotecSecurityTable |
1.3.6.1.4.1.495.3.6.2 |
The security level and group within privilege association table.
Currently this table is NOT accessible. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MemotecSecurityEntry |
|
memotecSecurityEntry |
1.3.6.1.4.1.495.3.6.2.1 |
Information about a security entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MemotecSecurityEntry |
|
|
memotecSecurityLevelIndex |
1.3.6.1.4.1.495.3.6.2.1.1 |
THE CX900 DOES NOT SUPPORT THIS OBJECT.
Displays the index number of the community name's security level.The
software automatically assigns this number to uniquely identify the
security level. The index acts as a pointer to this table.
You cannot modify this object. It is a display that the software provides.
Range of Values: a maximum of 5 digits from 1 to 65535
Default Value: none |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
memotecSecurityViewIndex |
1.3.6.1.4.1.495.3.6.2.1.2 |
THE CX900 DOES NOT SUPPORT THIS OBJECT.
Displays the index number of the memotecSecurityLevelIndex MIB object
group. The software assigns this number automatically to uniquely identify
the MIB group. The index acts as a pointer to this table.
You cannot modify this object. It is a display that the software provides.
Range of Values: a maximum of 5 digits from 1 to 65535
Default Value: none |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
memotecSecurityView |
1.3.6.1.4.1.495.3.6.2.1.3 |
THE CX900 DOES NOT SUPPORT THIS OBJECT.
An MIB object group defined for this view index of the security level.
Range of Values: none
Default Value: none |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
memotecSecurityRowStatus |
1.3.6.1.4.1.495.3.6.2.1.5 |
Determines the status of the objects in a table row.
The setting of this object is dynamic. When set to 'valid', the system
immediately implements the configuration entry.
Options:
invalid (1): row is flagged; after next reset the values will be disabled
and the row will be deleted from the table.
valid: (2): values are enabled.
Default Value: valid (2)
Configuration Changed: operative |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), valid(2) |
|
memotecTrapTable |
1.3.6.1.4.1.495.3.6.3 |
This is a trap table. It contains a list of IP addresses of SNMP
consoles to which SNMP traps are sent. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MemotecTrapEntry |
|
memotecTrapEntry |
1.3.6.1.4.1.495.3.6.3.1 |
An entry of the trap table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MemotecTrapEntry |
|
|
memotecTrapIndex |
1.3.6.1.4.1.495.3.6.3.1.1 |
Displays the index number of the trap entry. The software assigns this
number automatically to uniquely identify the trap entry. The index acts
as a pointer to this table.
Range of Values: a maximum of 5 digits from 1 to 65535
Default Value: none |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
memotecTrapNetAddress |
1.3.6.1.4.1.495.3.6.3.1.2 |
Determines the network address (i.e. IP address) of the system to which
traps are sent.
The setting of the object is dynamic. Traps are immediately sent to the IP
address you enter.
Range of Values: 4 octets, each digit ranging from 0 to 255.
Default Value: 0
Configuration Changed: operative |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
memotecTrapRowStatus |
1.3.6.1.4.1.495.3.6.3.1.4 |
Determines the status of the objects in a table row.
The setting of this object is dynamic. When set to 'valid', the system
immediately implements the trap entry.
Options:
invalid (1): row is flagged; after the next reset the values will be
disabled and the row will be deleted from the table.
valid (2): values are enabled.
Default Value: valid
Configuration Changed: operative |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), valid(2) |
|
memotecAdminMibModules |
1.3.6.1.4.1.495.3.7.1 |
This objects represents the presence of the various MIB modules
in the CPU. Each MIB module is represented by a bit. If the bit
is set, then it implies that the MIB Module is present. Bits are
numbered starting with zero, which is positioned as the high
order bit of the first byte. Bits are packed eight to a byte.
Unused bits should be set to zero. For example, to find out if
layer id 15 is present, the bit number 15 is tested if it is set.
MIB Module Module id (bit position)
-------------- ----------
COMPR.MIB 0
CXADXI.MIB 1
CXASYIO.MIB 2
CXASYNC.MIB 3
CXBCM.MIB 4
CXBOPD.MIB 5
CXBOPIO.MIB 6
CXCC.MIB 7
CXCD.MIB 8
CXCFGBR.MIB 9
CXCFGIP.MIB 10
CXCFGIPX.MIB 11
CXCHASSI.MIB 12
CXCONV.MIB 13
CXDDS.MIB 14
CXDIAL.MIB 15
CXDL.MIB 16
CXETHIO.MIB 17
CXEVM.MIB 18
CXFLTIP.MIB 19
CXFLTIPX.MIB 20
CXFR.MIB 21
CXFRIM.MIB 22
CXFS.MIB 23
CXGFF.MIB 24
CXGMF.MIB 25
CXIH.MIB 26
CXIHI.MIB 27
CXIPNCP.MIB 28
CXIPX.MIB 29
CXIPXSAP.MIB 30
CXISDN.MIB 31
CXLANIO.MIB 32
CXLAPBD.MIB 33
CXLBCNV.MIB 34
CXLFC.MIB 35
CXLIG.MIB 36
CXLLCIM.MIB 37
CXLLCL.MIB 38
CXMCDL.MIB 39
CXMCPRT.MIB 40
CXMCVOX.MIB 41
CXMH.MIB 42
CXMLPPP.MIB 43
CXOS.MIB 44
CXOSP.MIB 45
CXPHYIF.MIB 46
CXPORT.MIB 47
CXPPP.MIB 48
CXPPPIP.MIB 49
CXQLLC.MIB 50
CXSDLC.MIB 51
CXSDXI.MIB 52
CXSM.MIB 53
CXSNALC.MIB 54
CXT1E1.MIB 55
CXTB.MIB 56
CXTRDIO.MIB 57
CXUDRV.MIB 58
CXUI.MIB 59
CXUTST.MIB 60
CXV34.MIB 61
CXVIEWIN.MIB 62
CXVR.MIB 63
CXVSHELL.MIB 64
CXX25.MIB 65
MEMOTADM.MIB 66
RFC1213R.MIB 67
RFC1231.MIB 68
RFC1253.MIB 69
RFC1284M.MIB 70
RFC1286.MIB 71
RFC1389.MIB 72
CXDHCP.MIB 73
CXGIM.MIB 74
RFC1406.MIB 75
RFC1406X.MIB 76
CXACTE.MIB 77
CXBSC.MIB 78
CXDSP.MIB 79
CX_T1E1.MIB 80
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(32) |
|
memotecAdminMibLevel |
1.3.6.1.4.1.495.3.8 |
Used to determine current MIB module release supported
by the agent. Object is in decimal. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|