MIMOSA-NETWORKS-PTMP-MIB
File:
MIMOSA-NETWORKS-PTMP-MIB.mib (36208 bytes)
Imported modules
Imported symbols
Defined Types
MimosaPtmpSsidEntry |
|
SEQUENCE |
|
|
|
|
mimosaPtmpSsidIndex |
Integer32 |
|
|
mimosaPtmpSsidName |
DisplayString |
|
|
mimosaPtmpSsidType |
INTEGER |
|
|
mimosaPtmpSsidEnabled |
TruthValue |
|
|
mimosaPtmpSsidBroadcastEnabled |
TruthValue |
|
|
mimosaPtmpSsidIsolationEnabled |
TruthValue |
|
MimosaPtmpChannelPowerEntry |
|
SEQUENCE |
|
|
|
|
mimosaPtmpChPwrRadioIndex |
Unsigned32 |
|
|
mimosaPtmpChPwrRadioName |
DisplayString |
|
|
mimosaPtmpChPwrCntrFreqCfg |
Mimosa5GHzFrequency |
|
|
mimosaPtmpChPwrPrimChannelCfg |
Mimosa5GHzChannelNumber |
|
|
mimosaPtmpChPwrChWidthCfg |
Unsigned32 |
|
|
mimosaPtmpChPwrTxPowerCfg |
Integer32 |
|
|
mimosaPtmpChPwrCntrFreqCur |
Mimosa5GHzFrequency |
|
|
mimosaPtmpChPwrPrimChannelCur |
Mimosa5GHzChannelNumber |
|
|
mimosaPtmpChPwrChWidthCur |
Unsigned32 |
|
|
mimosaPtmpChPwrTxPowerCur |
Integer32 |
|
|
mimosaPtmpChPwrAgcMode |
INTEGER |
|
|
mimosaPtmpChPwrMinRxPower |
Integer32 |
|
MimosaPtmpChannelExclusionEntry |
|
SEQUENCE |
|
|
|
|
mimosaPtmpChannelExclusionIndex |
Integer32 |
|
|
mimosaPtmpChannelExclusionStart |
Integer32 |
|
|
mimosaPtmpChannelExclusionEnd |
Integer32 |
|
MimosaPtmpClientInfoEntry |
|
SEQUENCE |
|
|
|
|
mimosaPtmpClientInfoIndex |
Unsigned32 |
|
|
mimosaPtmpClientInfoMacAddress |
MacAddress |
|
|
mimosaPtmpClientName |
DisplayString |
|
|
mimosaPtmpClientFWVersion |
DisplayString |
|
|
mimosaPtmpClientIPAddress |
IpAddress |
|
|
mimosaPtmpClientAssociatedTime |
TimeStamp |
|
|
mimosaPtmpClientPlanName |
DisplayString |
|
|
mimosaPtmpClientUlCommitted |
Unsigned32 |
|
|
mimosaPtmpClientUlPeak |
Unsigned32 |
|
|
mimosaPtmpClientDlCommitted |
Unsigned32 |
|
|
mimosaPtmpClientDlPeak |
Unsigned32 |
|
|
mimosaPtmpClientInfoLastUpdated |
TimeStamp |
|
MimosaPtmpClientStatsEntry |
|
SEQUENCE |
|
|
|
|
mimosaPtmpClientStatsIndex |
Unsigned32 |
|
|
mimosaPtmpClientStatsMacAddress |
MacAddress |
|
|
mimosaPtmpClientAssocBW |
Unsigned32 |
|
|
mimosaPtmpClientRxBytes |
Counter64 |
|
|
mimosaPtmpClientTxBytes |
Counter64 |
|
|
mimosaPtmpClientRxPkts |
Counter64 |
|
|
mimosaPtmpClientTxPkts |
Counter64 |
|
|
mimosaPtmpClientRxPhyRate |
Unsigned32 |
|
|
mimosaPtmpClientTxPhyRate |
Unsigned32 |
|
|
mimosaPtmpClientTxAvgPer |
DecimalTwo |
|
|
mimosaPtmpClientRssiAvg |
DecimalOne |
|
|
mimosaPtmpClientStatsLastUpdated |
TimeStamp |
|
Defined Values
mimosaPtmp |
1.3.6.1.4.1.43356.2.1.2.9 |
The MIB module for Mimosa PTMP products |
MODULE-IDENTITY |
|
|
|
mimosaPtmpSsidEntry |
1.3.6.1.4.1.43356.2.1.2.9.1.1.1 |
Entry that describes each SSID and all its related configuration |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MimosaPtmpSsidEntry |
|
|
mimosaPtmpSsidIndex |
1.3.6.1.4.1.43356.2.1.2.9.1.1.1.1 |
Describes the index used to access a particular entry in the SSID
table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..24 |
|
mimosaPtmpSsidName |
1.3.6.1.4.1.43356.2.1.2.9.1.1.1.2 |
Describes the name of the SSID |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..32) |
|
mimosaPtmpSsidType |
1.3.6.1.4.1.43356.2.1.2.9.1.1.1.3 |
Describes the type of clients that will connect to this SSID. CPE
represents fixed, or Hotspot represents mobile devices |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
hotspot(0), cpe(1) |
|
mimosaPtmpSsidEnabled |
1.3.6.1.4.1.43356.2.1.2.9.1.1.1.4 |
Describes if the SSID is enabled (True) or disabled (False) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
mimosaPtmpWirelessMode |
1.3.6.1.4.1.43356.2.1.2.9.2.1 |
Describes the wireless protocol configured on the Mimosa Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
srs(1), wifiinterop(2) |
|
mimosaPtmpWirelessGender |
1.3.6.1.4.1.43356.2.1.2.9.2.2 |
Describes the wireless protocol gender that defines the transmit
and receive timing |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
a(1), b(2) |
|
mimosaPtmpAutoChannelEnabled |
1.3.6.1.4.1.43356.2.1.2.9.3.1 |
Describes if the Auto Channel feature is Enabled or Disabled. This
function selects the channel that results in the best RF
performance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
mimosaPtmpAntennaGain |
1.3.6.1.4.1.43356.2.1.2.9.3.2 |
Describes the antenna gain for connectorized version of the device.
Measured in dBi. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mimosaPtmpChannelPowerEntry |
1.3.6.1.4.1.43356.2.1.2.9.3.3.1 |
An entry containing channel and power information |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MimosaPtmpChannelPowerEntry |
|
|
mimosaPtmpChPwrCntrFreqCfg |
1.3.6.1.4.1.43356.2.1.2.9.3.3.1.3 |
Describes the configured center frequency of the channel used on the
access point. The center frequency represents the absolute center
of the selected channel width without any offset. Measured in MHz |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Mimosa5GHzFrequency |
|
|
mimosaPtmpChPwrChWidthCfg |
1.3.6.1.4.1.43356.2.1.2.9.3.3.1.5 |
Describes the channel width for access point operation: 20 MHz,
40 MHz or 80 MHz |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mimosaPtmpChPwrTxPowerCfg |
1.3.6.1.4.1.43356.2.1.2.9.3.3.1.6 |
Describes the desired transmit power level. The allowed options
are determined by a combination of country and chosen frequency.
Measured in dBm |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mimosaPtmpChPwrCntrFreqCur |
1.3.6.1.4.1.43356.2.1.2.9.3.3.1.7 |
Describes the current center frequency of the channel used on the
access point. The center frequency represents the absolute center
of the selected channel width without any offset. Measured in MHz |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Mimosa5GHzFrequency |
|
|
mimosaPtmpChPwrChWidthCur |
1.3.6.1.4.1.43356.2.1.2.9.3.3.1.9 |
Describes the current channel width for access point operation: 20 MHz,
40 MHz or 80 MHz |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mimosaPtmpChPwrTxPowerCur |
1.3.6.1.4.1.43356.2.1.2.9.3.3.1.10 |
Describes the current transmit power level. The allowed options
are determined by a combination of country and chosen frequency.
Measured in dBm |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mimosaPtmpChPwrAgcMode |
1.3.6.1.4.1.43356.2.1.2.9.3.3.1.11 |
Describes the setting for Automatic Gain Control (AGC) feature,
which is used to set the signal level below which the radio
ignores incoming RF interference. The choices are Off or Manual |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(0), manual(1) |
|
mimosaPtmpChPwrMinRxPower |
1.3.6.1.4.1.43356.2.1.2.9.3.3.1.12 |
Describes the Rx power level (in manual AGC Mode) below your
expected signal, but above other interference, measured in dBm |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-90..-10 |
|
mimosaPtmpChannelExclusionEntry |
1.3.6.1.4.1.43356.2.1.2.9.3.4.1 |
Entry that describes each SSID and all its related configuration |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MimosaPtmpChannelExclusionEntry |
|
|
mimosaPtmpChannelExclusionIndex |
1.3.6.1.4.1.43356.2.1.2.9.3.4.1.1 |
Describes the index used to access a particular entry in the
Exclusion list table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..16 |
|
mimosaPtmpChannelExclusionStart |
1.3.6.1.4.1.43356.2.1.2.9.3.4.1.2 |
Describes the lower limit for the exclusion range, not including
this frequency |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mimosaPtmpChannelExclusionEnd |
1.3.6.1.4.1.43356.2.1.2.9.3.4.1.3 |
Describes the upper limit for the exclusion range, not including
this frequency. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mimosaPtmpApStatsRxBytes |
1.3.6.1.4.1.43356.2.1.2.9.4.1 |
Describes the number of bytes received by the AP in single-User mode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
mimosaPtmpApStatsTxBytes |
1.3.6.1.4.1.43356.2.1.2.9.4.2 |
Describes the number of bytes transmitted by the AP in single-user
mode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
mimosaPtmpApStatsRxPkts |
1.3.6.1.4.1.43356.2.1.2.9.4.3 |
Describes the number of packets received by the AP in single-user mode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
mimosaPtmpApStatsTxPkts |
1.3.6.1.4.1.43356.2.1.2.9.4.4 |
Describes the number of packets transmitted by the AP in
single-user mode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
mimosaPtmpApStatsTxPer |
1.3.6.1.4.1.43356.2.1.2.9.4.5 |
Describes the packet error rate on the transmit path of the
AP, in single-user mode |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mimosaPtmpClientInfoEntry |
1.3.6.1.4.1.43356.2.1.2.9.5.1.1 |
Entry that describes each client and related configuration and
statistics. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MimosaPtmpClientInfoEntry |
|
|
mimosaPtmpClientInfoIndex |
1.3.6.1.4.1.43356.2.1.2.9.5.1.1.1 |
Describes the index used to access a particular entry in the
Client Traffic Shaping Information table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mimosaPtmpClientName |
1.3.6.1.4.1.43356.2.1.2.9.5.1.1.3 |
Describes the name associated with this client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
mimosaPtmpClientFWVersion |
1.3.6.1.4.1.43356.2.1.2.9.5.1.1.4 |
Describes the firmware version of this client.
This is supported only if the client is a Mimosa device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..64) |
|
mimosaPtmpClientUlPeak |
1.3.6.1.4.1.43356.2.1.2.9.5.1.1.9 |
Describes the Uplink Peak Rate configured for the client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mimosaPtmpClientDlPeak |
1.3.6.1.4.1.43356.2.1.2.9.5.1.1.11 |
Describes the Downlink Peak Rate configured for the client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mimosaPtmpClientStatsEntry |
1.3.6.1.4.1.43356.2.1.2.9.6.1.1 |
Entry that describes each client all its related configuration and
statistics. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MimosaPtmpClientStatsEntry |
|
|
mimosaPtmpClientStatsIndex |
1.3.6.1.4.1.43356.2.1.2.9.6.1.1.1 |
Describes the index used to access a particular entry in the
Client Information table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
mimosaPtmpClientRxBytes |
1.3.6.1.4.1.43356.2.1.2.9.6.1.1.4 |
Describes the number of bytes received from this client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
mimosaPtmpClientTxBytes |
1.3.6.1.4.1.43356.2.1.2.9.6.1.1.5 |
Describes the number of bytes transmitted to this client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
mimosaPtmpClientRxPkts |
1.3.6.1.4.1.43356.2.1.2.9.6.1.1.6 |
Describes the number of packets received from this client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
mimosaPtmpClientTxPkts |
1.3.6.1.4.1.43356.2.1.2.9.6.1.1.7 |
Describes the number of packets transmitted to this client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
mimosaPtmpClientTxAvgPer |
1.3.6.1.4.1.43356.2.1.2.9.6.1.1.10 |
Describes the average packet error rate on the transmit side for
this client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DecimalTwo |
|
|
mimosaPtmpMgmtIpAddress |
1.3.6.1.4.1.43356.2.1.2.9.7.1 |
Describes the IP Address configured on the Mimosa Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mimosaPtmpMgmtIpNetmask |
1.3.6.1.4.1.43356.2.1.2.9.7.2 |
Describes the IP netmask configured on the Mimosa Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mimosaPtmpMgmtIpGateway |
1.3.6.1.4.1.43356.2.1.2.9.7.3 |
Describes the IP Address of the Gateway configured on the Mimosa
Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mimosaPtmpMgmtIpMode |
1.3.6.1.4.1.43356.2.1.2.9.7.4 |
Describes the IP Address assignment mode configured on the Mimosa
Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(4..6) |
|
mimosaPtmpMgmtPrimaryDNS |
1.3.6.1.4.1.43356.2.1.2.9.7.5 |
Describes the IP Address of the Primary DNS server configured on the
Mimosa Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mimosaPtmpMgmtSecondaryDNS |
1.3.6.1.4.1.43356.2.1.2.9.7.6 |
Describes the IP Address of the Secondary DNS server configured on the
Mimosa Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
mimosaPtmpMgmtVlanStatus |
1.3.6.1.4.1.43356.2.1.2.9.7.7 |
Describes the status of management vlan configured on the Mimosa Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disable(0), enable(1) |
|
mimosaPtmpMgmtVlanId |
1.3.6.1.4.1.43356.2.1.2.9.7.8 |
Describes the management vlan-id configured on the Mimosa Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
mimosaPtmpMgmtVlanPassthrough |
1.3.6.1.4.1.43356.2.1.2.9.7.9 |
Describes the status of the vlan passthrough configured on the Mimosa Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disable(0), enable(1) |
|
mimosaPtmpMgmtEthernetMac |
1.3.6.1.4.1.43356.2.1.2.9.7.10 |
Describes the Ethernet MAC address configured on the Mimosa Device |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
mimosaPtmpCompliance |
1.3.6.1.4.1.43356.2.4.2.1.1 |
The compliance statement for PTMP supported Access Points that
implement this MIB. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
mimosaPtmpSsidGroup |
1.3.6.1.4.1.43356.2.4.2.2.1 |
A collection of objects for the SSID Table. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
mimosaPtmpLinkInfoGroup |
1.3.6.1.4.1.43356.2.4.2.2.2 |
A collection of objects for the wireless link objects. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
mimosaPtmpChannelPowerGroup |
1.3.6.1.4.1.43356.2.4.2.2.3 |
A collection of objects for the wireless channel and power settings. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
mimosaPtmpApStatsGroup |
1.3.6.1.4.1.43356.2.4.2.2.4 |
A collection of objects describing the AP related statistics. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
mimosaPtmpClientInfoGroup |
1.3.6.1.4.1.43356.2.4.2.2.5 |
A collection of objects describing the client details. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
mimosaPtmpClientStatsGroup |
1.3.6.1.4.1.43356.2.4.2.2.6 |
A collection of objects describing the client statistics. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
mimosaPtmpMgmtInfoGroup |
1.3.6.1.4.1.43356.2.4.2.2.7 |
A collection of objects describing the client details. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|