MLB-MIB

File: MLB-MIB.mib (47999 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RADWARE-MIB

Imported symbols

IpAddress Counter OBJECT-TYPE
DisplayString rsMLB

Defined Types

RsMLBApplicationServerEntry  
SEQUENCE    
  rsMLBServerAddr IpAddress
  rsMLBServerName DisplayString
  rsMLBServerOperStatus INTEGER
  rsMLBServerWeight INTEGER
  rsMLBServerAttachedUsersNumber INTEGER
  rsMLBServerPeakLoad INTEGER
  rsMLBServerFramesRate INTEGER
  rsMLBServerFramesLoad Counter
  rsMLBServerStatus INTEGER
  rsMLBServerOperMode INTEGER
  rsMLBServerConnectionLimit INTEGER
  rsMLBServerAdminStatus INTEGER
  rsMLBServerType INTEGER
  rsMLBServerMacStatus INTEGER
  rsMLBServerPortNumber INTEGER
  rsMLBServerPeakBytesLoad INTEGER
  rsMLBServerBytesRate INTEGER
  rsMLBServerBytesLoad Counter
  rsMLBServerRecoveryTime INTEGER
  rsMLBServerWarmUpTime INTEGER
  rsMLBServerTotalFramesLoad Counter
  rsMLBServerProximityCheck INTEGER

RsMLBClientEntry  
SEQUENCE    
  rsMLBClientAddr IpAddress
  rsMLBDestinationAddr IpAddress
  rsMLBAttachedServerAddr IpAddress
  rsMLBClientLastActivityTime INTEGER
  rsMLBClientAttachmentTime INTEGER
  rsMLBClientStatus INTEGER

RsMLBRemoteConnectivityEntry  
SEQUENCE    
  rsMLBRmtConSrvrAddr IpAddress
  rsMLBRmtConIpAddr IpAddress
  rsMLBRmtConStatus INTEGER
  rsMLBRmtConOperStatus INTEGER

RsMLBRulesEntry  
SEQUENCE    
  rsMLBRulesPortNumber INTEGER
  rsMLBRulesLeavingPort INTEGER
  rsMLBRulesNumOfServers INTEGER

RsMLBVirtualIPEntry  
SEQUENCE    
  rsMLBVirtualIPAddress IpAddress
  rsMLBVirtualMode INTEGER
  rsMLBVirtualStatus INTEGER

RsMLBMappedIPEntry  
SEQUENCE    
  rsMLBMappedVirtualAddress IpAddress
  rsMLBMappedFirewallIP IpAddress
  rsMLBMappedFirewallNAT IpAddress
  rsMLBMappedStatus INTEGER

RsMLBSubnetGroupEntry  
SEQUENCE    
  rsMLBDestSubnetAddr IpAddress
  rsMLBDestSubnetMask IpAddress
  rsMLBSubnetSrvrAddr IpAddress
  rsMLBSubnetSrvrStatus INTEGER
  rsMLBSubnetSrvrOperMode INTEGER

RsMLBApplPortGroupEntry  
SEQUENCE    
  rsMLBApplPort INTEGER
  rsMLBApplPortSrvrAddr IpAddress
  rsMLBApplPortSrvrStatus INTEGER
  rsMLBApplPortSrvrOperMode INTEGER

RsMLBSrcSbntGroupEntry  
SEQUENCE    
  rsMLBSrcSbntAddr IpAddress
  rsMLBSrcSbntMask IpAddress
  rsMLBSrcSbntSrvrAddr IpAddress
  rsMLBSrcSbntSrvrStatus INTEGER
  rsMLBSrcSbntSrvrOperMode INTEGER

RsMLBNatEntry  
SEQUENCE    
  rsMLBNatRouterAddress IpAddress
  rsMLBNatAddress IpAddress
  rsMLBNatStatus INTEGER
  rsMLBNatMode INTEGER

RsMLBStaticNatEntry  
SEQUENCE    
  rsMLBStaticNatLclServerAddress IpAddress
  rsMLBStaticNatRouterAddress IpAddress
  rsMLBStaticNatAddress IpAddress
  rsMLBStaticNatStatus INTEGER
  rsMLBStaticNatMode INTEGER

RsMLBStaticProximityEntry  
SEQUENCE    
  rsMLBStaticProximityRangeFrom IpAddress
  rsMLBStaticProximityRangeTo IpAddress
  rsMLBStaticProximityStatus INTEGER
  rsMLBStaticProximityServer1 IpAddress
  rsMLBStaticProximityServer2 IpAddress
  rsMLBStaticProximityServer3 IpAddress

RsMLBPrxyCheckFPIPEntry  
SEQUENCE    
  rsMLBRouterAddr IpAddress
  rsMLBFPIPAddr IpAddress
  rsMLBPrxyCheckFPIPStatus INTEGER

RsMLBURLtoIPEntry  
SEQUENCE    
  rsMLBURL DisplayString
  rsMLBURLLocDeviceIP IpAddress
  rsMLBURLStatus INTEGER

RsMLBDNSVirtualEntry  
SEQUENCE    
  rsMLBDNSVirtualIP IpAddress
  rsMLBDNSVirIPMode INTEGER
  rsMLBDNSStatus INTEGER

RsMLBAgingTimeEntry  
SEQUENCE    
  rsMLBAgingTimeApplPort INTEGER
  rsMLBAgingTime INTEGER
  rsMLBAgingTimeStatus INTEGER

Defined Values

rsMLBApplicationServersTable 1.3.6.1.4.1.89.35.1.38.1
Table containing the list of application servers to which the clients requested are dispatched.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBApplicationServerEntry

rsMLBApplicationServerEntry 1.3.6.1.4.1.89.35.1.38.1.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBApplicationServerEntry  

rsMLBServerAddr 1.3.6.1.4.1.89.35.1.38.1.1.1
Application IP address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBServerName 1.3.6.1.4.1.89.35.1.38.1.1.2
The name assigned by the user to the server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..20)  

rsMLBServerOperStatus 1.3.6.1.4.1.89.35.1.38.1.1.3
Operational status of application on server. active - server is active notInService - server is or will become inactive. Existing sessions will be redirected to other servers. noNewSessions - server will receive no new sessions. Existing sessions are allowed to complete.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), notInService(2), noNewSessions(3)  

rsMLBServerWeight 1.3.6.1.4.1.89.35.1.38.1.1.4
A numerical weight assigned by the user in order to impose some priority mechanism on the server dispatchers considerations of which server to choose for attaching a client .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

rsMLBServerAttachedUsersNumber 1.3.6.1.4.1.89.35.1.38.1.1.5
Number of currently active users attached to this server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBServerPeakLoad 1.3.6.1.4.1.89.35.1.38.1.1.6
Maximal number of frames per second dispatched to server since last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBServerFramesRate 1.3.6.1.4.1.89.35.1.38.1.1.7
Number of frames per second dispatched to server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBServerFramesLoad 1.3.6.1.4.1.89.35.1.38.1.1.8
Number of frames per second dispatched to server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rsMLBServerStatus 1.3.6.1.4.1.89.35.1.38.1.1.9
Administative status of appliaction on server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBServerOperMode 1.3.6.1.4.1.89.35.1.38.1.1.10
This variable indicate the status of the server, the MLB will not send any messages to a backup server unless all other server are down status. In case of more then one backup server, the MLB will decide to which backup server to send the massages acordinf to rsMLBWeight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regular(1), backup(2)  

rsMLBServerConnectionLimit 1.3.6.1.4.1.89.35.1.38.1.1.11
The maximal number of client sessions which can be opened on this sever.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rsMLBServerAdminStatus 1.3.6.1.4.1.89.35.1.38.1.1.12
Administrative status of application on server. enable - activates the server. The rsMLBServerOperStatus will change to active. disable - stops the server. The rsMLBServerOperStatus will change to notInService. shutdown - gracefully shuts down the server. The rsMLBServerOperStatus will change to noNewSessions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), shutdown(3)  

rsMLBServerType 1.3.6.1.4.1.89.35.1.38.1.1.13
The type of Firewall. regular - indicates that the firewall is a regular server. nextHopRouter - the Firewall is a next hop in the router table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER regular(1), nextHopRouter(2)  

rsMLBServerMacStatus 1.3.6.1.4.1.89.35.1.38.1.1.14
Indicates if the Mac address of the server was obtained. THe mac address is retrieve either from the Arp table or by sending Arp request. found - mac address was found notFound - mac address was not found
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER found(1), notFound(2)  

rsMLBServerPortNumber 1.3.6.1.4.1.89.35.1.38.1.1.15
The FireProof port this server is connected to
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBServerPeakBytesLoad 1.3.6.1.4.1.89.35.1.38.1.1.16
Maximal number of bytes per second dispatched to server since last reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBServerBytesRate 1.3.6.1.4.1.89.35.1.38.1.1.17
Number of bytes per second dispatched to server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBServerBytesLoad 1.3.6.1.4.1.89.35.1.38.1.1.18
Number of bytes per second dispatched to server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rsMLBServerRecoveryTime 1.3.6.1.4.1.89.35.1.38.1.1.19
Number of seconds after server initialization during which ISD won't send any requests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rsMLBServerWarmUpTime 1.3.6.1.4.1.89.35.1.38.1.1.20
Number of seconds after server recovery during which the server will get less requests than permitted by his weight and load.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rsMLBServerTotalFramesLoad 1.3.6.1.4.1.89.35.1.38.1.1.21
Total number of frames dispatched to server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rsMLBServerProximityCheck 1.3.6.1.4.1.89.35.1.38.1.1.22
Enable\Disable proximity check through this router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMLBdummy1 1.3.6.1.4.1.89.35.1.38.1.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBAdminStatus 1.3.6.1.4.1.89.35.1.38.2
Enable/Disable server dispatcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMLBClientsLifeTime 1.3.6.1.4.1.89.35.1.38.3
Maximal period of time in seconds a non-active client is kept in the clients table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rsMLBDispatchMethod 1.3.6.1.4.1.89.35.1.38.4
Type of dispatching required.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER cyclic(1), leastTraffic(2), leastUsersNumber(3), nt-1(4), nt-2(5), private-1(6), private-2(7), leastBytesNumber(8)  

rsMLBCheckConnectivityStatus 1.3.6.1.4.1.89.35.1.38.5
Enable or Disable servers polling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMLBCheckConnectivityMethod 1.3.6.1.4.1.89.35.1.38.6
This variable indicate the method the MLB check the connectivity. where the value 1 means check connectiotivity by ping, other value serve as a tcp port number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rsMLBCheckConnectivityInterval 1.3.6.1.4.1.89.35.1.38.7
Polling interval in seconds for servers polling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3600  

rsMLBCheckConnectivityRetries 1.3.6.1.4.1.89.35.1.38.8
This variable indicate the Minimal number of unsuccessful polling attempts before considering a server disconnected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

rsMLBClientsConnectDenials 1.3.6.1.4.1.89.35.1.38.9
This variable indicate the Number of connection requests from clients that were denied by the the server dispatcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

rsMLBClientsTable 1.3.6.1.4.1.89.35.1.38.10
Table containing the list of clients currently attached to a server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBClientEntry

rsMLBClientEntry 1.3.6.1.4.1.89.35.1.38.10.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBClientEntry  

rsMLBClientAddr 1.3.6.1.4.1.89.35.1.38.10.1.1
Client IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBDestinationAddr 1.3.6.1.4.1.89.35.1.38.10.1.2
IP Address of server currently serving this client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBAttachedServerAddr 1.3.6.1.4.1.89.35.1.38.10.1.3
IP Address of server currently serving this client.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBClientLastActivityTime 1.3.6.1.4.1.89.35.1.38.10.1.4
Indicates when the last frame from the client was dispatched. Measured in seconds since device re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBClientAttachmentTime 1.3.6.1.4.1.89.35.1.38.10.1.5
Indicates when the client was attached. Measured in seconds since device re-initialization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBClientStatus 1.3.6.1.4.1.89.35.1.38.10.1.6
This variable indicates the administrative status of this entry. Used to delete an entry of this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBdummy2 1.3.6.1.4.1.89.35.1.38.10.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBSessionTracking 1.3.6.1.4.1.89.35.1.38.11
Enable or Disable session tracking. Usually, when working with Firewall we need to send the whole traffic of a specific session through the same Firewall. For this purpose we should keep track of the session and use the enable option. When working with routers, sending the whole traffic through the same Firewall is not necessary. Therefor there is no need to keep track of the sessions and we can use the disable option.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMLBRemoteConnectivityTable 1.3.6.1.4.1.89.35.1.38.12
Table containing the list of IPs which the connectivity check is performed on them.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBRemoteConnectivityEntry

rsMLBRemoteConnectivityEntry 1.3.6.1.4.1.89.35.1.38.12.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBRemoteConnectivityEntry  

rsMLBRmtConSrvrAddr 1.3.6.1.4.1.89.35.1.38.12.1.1
Server IP address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBRmtConIpAddr 1.3.6.1.4.1.89.35.1.38.12.1.2
The IP address that the connectivity check will be performed on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBRmtConStatus 1.3.6.1.4.1.89.35.1.38.12.1.3
Administative status of appliaction on the concection check IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBRmtConOperStatus 1.3.6.1.4.1.89.35.1.38.12.1.4
Hold the operational status of the checked IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER active(1), notInService(2)  

rsMLBdummy3 1.3.6.1.4.1.89.35.1.38.12.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBClientTableMode 1.3.6.1.4.1.89.35.1.38.13
Determine the mode of keep entries in the client table. layer 3 means that entries are kept according to source Ip and destination IP layer 4 means that entries are kept according to source Ip, destination IP and ports
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER layer3(1), layer4(2)  

rsMLBRulesTable 1.3.6.1.4.1.89.35.1.38.14
Table containing the list of
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBRulesEntry

rsMLBRulesEntry 1.3.6.1.4.1.89.35.1.38.14.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBRulesEntry  

rsMLBRulesPortNumber 1.3.6.1.4.1.89.35.1.38.14.1.1
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBRulesLeavingPort 1.3.6.1.4.1.89.35.1.38.14.1.2
Tok_String
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rsMLBRulesNumOfServers 1.3.6.1.4.1.89.35.1.38.14.1.3
Tok_String
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBdummy4 1.3.6.1.4.1.89.35.1.38.14.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBTranslateOutBoundMode 1.3.6.1.4.1.89.35.1.38.15
Translate FW NAT IP address to a virtual IP address for traffic that originated inside
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMLBVirtualIPTable 1.3.6.1.4.1.89.35.1.38.16
The table for storing the VIP's
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBVirtualIPEntry

rsMLBVirtualIPEntry 1.3.6.1.4.1.89.35.1.38.16.1
The row definition for the VIP table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBVirtualIPEntry  

rsMLBVirtualIPAddress 1.3.6.1.4.1.89.35.1.38.16.1.1
The Virtual IP entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBVirtualMode 1.3.6.1.4.1.89.35.1.38.16.1.2
The virtual IP mode - either backup/regular
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regular(1), backup(2)  

rsMLBVirtualStatus 1.3.6.1.4.1.89.35.1.38.16.1.3
This variable indicates the administrative status of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBdummy5 1.3.6.1.4.1.89.35.1.38.16.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBMappedIPTable 1.3.6.1.4.1.89.35.1.38.17
The table for storing the mapped VIP entries
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBMappedIPEntry

rsMLBMappedIPEntry 1.3.6.1.4.1.89.35.1.38.17.1
The row definition for the mapped table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBMappedIPEntry  

rsMLBMappedVirtualAddress 1.3.6.1.4.1.89.35.1.38.17.1.1
The Virtual IP entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBMappedFirewallIP 1.3.6.1.4.1.89.35.1.38.17.1.2
The firewall IP address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBMappedFirewallNAT 1.3.6.1.4.1.89.35.1.38.17.1.3
The firewall NAT IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBMappedStatus 1.3.6.1.4.1.89.35.1.38.17.1.4
This variable indicates the administrative status of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBdummy6 1.3.6.1.4.1.89.35.1.38.17.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBVirtualConnectivityIP 1.3.6.1.4.1.89.35.1.38.18
The virtual connectivity IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBVirtualConnectivityMode 1.3.6.1.4.1.89.35.1.38.19
The virtual IP mode - either backup/regular
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regular(1), backup(2)  

rsMLBRemoveEntryAtSessionEnd 1.3.6.1.4.1.89.35.1.38.20
Remove client entry at session end.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMLBFirewallPortID 1.3.6.1.4.1.89.35.1.38.21
Identify Firewall not only by Mac but also by port
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMLBSubnetGroupTable 1.3.6.1.4.1.89.35.1.38.23
Table containing the list of FW which belong to a particular destination subnet group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBSubnetGroupEntry

rsMLBSubnetGroupEntry 1.3.6.1.4.1.89.35.1.38.23.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBSubnetGroupEntry  

rsMLBDestSubnetAddr 1.3.6.1.4.1.89.35.1.38.23.1.1
Destination subnet address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBDestSubnetMask 1.3.6.1.4.1.89.35.1.38.23.1.2
Destination subnet mask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBSubnetSrvrAddr 1.3.6.1.4.1.89.35.1.38.23.1.3
The IP address of the server that belong to the destination subnet group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBSubnetSrvrStatus 1.3.6.1.4.1.89.35.1.38.23.1.4
Administrative status of the server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBSubnetSrvrOperMode 1.3.6.1.4.1.89.35.1.38.23.1.5
define the operational mode (regular or backup) of the server in the subnet group
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regular(1), backup(2)  

rsMLBdummy8 1.3.6.1.4.1.89.35.1.38.23.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBApplicationPortGroupTable 1.3.6.1.4.1.89.35.1.38.24
Table containing the list of FW which belong to a particular application port group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBApplPortGroupEntry

rsMLBApplPortGroupEntry 1.3.6.1.4.1.89.35.1.38.24.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBApplPortGroupEntry  

rsMLBApplPort 1.3.6.1.4.1.89.35.1.38.24.1.1
The application port of the group
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBApplPortSrvrAddr 1.3.6.1.4.1.89.35.1.38.24.1.2
The IP address of the server that belong to the application port group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBApplPortSrvrStatus 1.3.6.1.4.1.89.35.1.38.24.1.3
Administrative status of the server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBApplPortSrvrOperMode 1.3.6.1.4.1.89.35.1.38.24.1.4
define the operational mode (regular or backup) of the server in the subnet group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regular(1), backup(2)  

rsMLBdummy9 1.3.6.1.4.1.89.35.1.38.24.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBSrcSbntGroupTable 1.3.6.1.4.1.89.35.1.38.25
Table containing the list of FW which belong to a particular source subnet group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBSrcSbntGroupEntry

rsMLBSrcSbntGroupEntry 1.3.6.1.4.1.89.35.1.38.25.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBSrcSbntGroupEntry  

rsMLBSrcSbntAddr 1.3.6.1.4.1.89.35.1.38.25.1.1
Source subnet address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBSrcSbntMask 1.3.6.1.4.1.89.35.1.38.25.1.2
source subnet mask.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBSrcSbntSrvrAddr 1.3.6.1.4.1.89.35.1.38.25.1.3
The IP address of the server that belong to the source subnet group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBSrcSbntSrvrStatus 1.3.6.1.4.1.89.35.1.38.25.1.4
Administrative status of the server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBSrcSbntSrvrOperMode 1.3.6.1.4.1.89.35.1.38.25.1.5
define the operational mode (regular or backup) of the server in the source subnet group
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regular(1), backup(2)  

rsMLBdummy10 1.3.6.1.4.1.89.35.1.38.25.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBNatTable 1.3.6.1.4.1.89.35.1.38.26
In this table the FP saves the NAT addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBNatEntry

rsMLBNatEntry 1.3.6.1.4.1.89.35.1.38.26.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBNatEntry  

rsMLBNatRouterAddress 1.3.6.1.4.1.89.35.1.38.26.1.1
The Router IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBNatAddress 1.3.6.1.4.1.89.35.1.38.26.1.2
The NAT IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBNatStatus 1.3.6.1.4.1.89.35.1.38.26.1.3
This variable indicates the administrative status of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBNatMode 1.3.6.1.4.1.89.35.1.38.26.1.4
The NAT mode - either backup/regular
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regular(1), backup(2)  

rsMLBdummy11 1.3.6.1.4.1.89.35.1.38.26.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBFpNatStatus 1.3.6.1.4.1.89.35.1.38.27
Nat Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMLBStaticNatTable 1.3.6.1.4.1.89.35.1.38.28
In this table the FP saves the static NAT addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBStaticNatEntry

rsMLBStaticNatEntry 1.3.6.1.4.1.89.35.1.38.28.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBStaticNatEntry  

rsMLBStaticNatLclServerAddress 1.3.6.1.4.1.89.35.1.38.28.1.1
IP Address of the local machine whost IP address should be translated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBStaticNatRouterAddress 1.3.6.1.4.1.89.35.1.38.28.1.2
The Router IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBStaticNatAddress 1.3.6.1.4.1.89.35.1.38.28.1.3
The Static NAT IP Address who is related to the local machine and router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBStaticNatStatus 1.3.6.1.4.1.89.35.1.38.28.1.4
This variable indicates the administrative status of this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBStaticNatMode 1.3.6.1.4.1.89.35.1.38.28.1.5
The Static NAT mode - either backup/regular
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regular(1), backup(2)  

rsMLBdummy12 1.3.6.1.4.1.89.35.1.38.28.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBProximity 1.3.6.1.4.1.89.35.1.38.29
OBJECT IDENTIFIER    

rsMLBStaticProximityTable 1.3.6.1.4.1.89.35.1.38.29.1
In this table the MLB saves the static proximity ranges per server farm IP Address
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBStaticProximityEntry

rsMLBStaticProximityEntry 1.3.6.1.4.1.89.35.1.38.29.1.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBStaticProximityEntry  

rsMLBStaticProximityRangeFrom 1.3.6.1.4.1.89.35.1.38.29.1.1.1
The IP Address of the low boundary of the interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBStaticProximityRangeTo 1.3.6.1.4.1.89.35.1.38.29.1.1.2
The IP Address of the high boundary of the interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBStaticProximityStatus 1.3.6.1.4.1.89.35.1.38.29.1.1.3
This variable indicate the Administative status of this entry. Use for delete an entry in this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBStaticProximityServer1 1.3.6.1.4.1.89.35.1.38.29.1.1.4
The first priority server that this range of clients will be redirected to
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBStaticProximityServer2 1.3.6.1.4.1.89.35.1.38.29.1.1.5
The second priority server that this range of clients will be redirected to
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBStaticProximityServer3 1.3.6.1.4.1.89.35.1.38.29.1.1.6
The third priority server that this range of clients will be redirected to
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBProximityOperationMode 1.3.6.1.4.1.89.35.1.38.29.2
Allow proximity operation, and choose between operating only static proximity or dynamic proximity as well
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noProximity(1), staticProximity(2), fullProximityInbound(3), fullProximityOutbound(4), fullProximityBoth(5)  

rsMLBProximityMainDNS 1.3.6.1.4.1.89.35.1.38.29.3
The IP Address of the main DNS to be ignored in the proximity operation
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBProximityBackupDNS 1.3.6.1.4.1.89.35.1.38.29.4
The IP Address of the backup DNS to be ignored in the proximity operation
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBProximityAgingPeriod 1.3.6.1.4.1.89.35.1.38.29.5
The time in hours after which an old dynamic entry is invalid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rsMLBProximityRetries 1.3.6.1.4.1.89.35.1.38.29.6
The number of tries for checking the client distance
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..5  

rsMLBProximityTimeout 1.3.6.1.4.1.89.35.1.38.29.7
The timeout between proximity checks
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

rsMLBProximityTuning 1.3.6.1.4.1.89.35.1.38.29.8
OBJECT IDENTIFIER    

rsMLBMaxDynEntries 1.3.6.1.4.1.89.35.1.38.29.8.1
Maximal number of entries in the dynamic proximity table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBMaxDynEntriesAfterReset 1.3.6.1.4.1.89.35.1.38.29.8.2
Future maximal number of entries in the dynamic proximity table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rsMLBProximityHopsWeight 1.3.6.1.4.1.89.35.1.38.29.9
The weight given to the clients hops distance in the dispatching decision
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rsMLBProximityLatencyWeight 1.3.6.1.4.1.89.35.1.38.29.10
The weight given to the clients latency in the dispatching decision
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rsMLBProximityLoadWeight 1.3.6.1.4.1.89.35.1.38.29.11
The weight given to the site load in the dispatching decision
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

rsMLBPrxyCheckFPIPTable 1.3.6.1.4.1.89.35.1.38.29.12
Table containing FP IP address for each server. This FP IP serves as the source IP for the proximity check packet which is send through this server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBPrxyCheckFPIPEntry

rsMLBPrxyCheckFPIPEntry 1.3.6.1.4.1.89.35.1.38.29.12.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBPrxyCheckFPIPEntry  

rsMLBRouterAddr 1.3.6.1.4.1.89.35.1.38.29.12.1.1
Server address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBFPIPAddr 1.3.6.1.4.1.89.35.1.38.29.12.1.2
FP IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBPrxyCheckFPIPStatus 1.3.6.1.4.1.89.35.1.38.29.12.1.4
Administrative status of the row.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBdummy15 1.3.6.1.4.1.89.35.1.38.29.12.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBDNS 1.3.6.1.4.1.89.35.1.38.30
OBJECT IDENTIFIER    

rsMLBDNSURLtoIPTable 1.3.6.1.4.1.89.35.1.38.30.1
The table for storing the IPs for URLs
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBURLtoIPEntry

rsMLBURLtoIPEntry 1.3.6.1.4.1.89.35.1.38.30.1.1
The row definition for IPs for URLs table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBURLtoIPEntry  

rsMLBURL 1.3.6.1.4.1.89.35.1.38.30.1.1.1
The URL address
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..50)  

rsMLBURLLocDeviceIP 1.3.6.1.4.1.89.35.1.38.30.1.1.2
The local device's IP
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

rsMLBURLStatus 1.3.6.1.4.1.89.35.1.38.30.1.1.3
This variable indicates the administrative status of this entry. Used to delete an entry of this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBdummy13 1.3.6.1.4.1.89.35.1.38.30.1.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBDNSttl 1.3.6.1.4.1.89.35.1.38.30.2
DNS time to live
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rsMLBDNSTwoAnswers 1.3.6.1.4.1.89.35.1.38.30.3
Sending two DNS answers
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMLBDNSVirtualTable 1.3.6.1.4.1.89.35.1.38.30.4
The table for DNS virtual IPs
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBDNSVirtualEntry

rsMLBDNSVirtualEntry 1.3.6.1.4.1.89.35.1.38.30.4.1
The row definition for DNS virtual IPs table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBDNSVirtualEntry  

rsMLBDNSVirtualIP 1.3.6.1.4.1.89.35.1.38.30.4.1.1
The DNS Virtual IP status
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

rsMLBDNSVirIPMode 1.3.6.1.4.1.89.35.1.38.30.4.1.2
The DNS Virtual IP mode (regular/backup)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER regular(1), backup(2)  

rsMLBDNSStatus 1.3.6.1.4.1.89.35.1.38.30.4.1.3
This variable indicates the administrative status of this entry. Used to delete an entry of this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBdummy14 1.3.6.1.4.1.89.35.1.38.30.4.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBSrcPortInClientHash 1.3.6.1.4.1.89.35.1.38.31
enable - client's source port is used in client table hashing, disable - only client IP and destination IP are used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMLBAgingTimeTable 1.3.6.1.4.1.89.35.1.38.32
This table determine the aging time for specific applications.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RsMLBAgingTimeEntry

rsMLBAgingTimeEntry 1.3.6.1.4.1.89.35.1.38.32.1
The row definition for this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  RsMLBAgingTimeEntry  

rsMLBAgingTimeApplPort 1.3.6.1.4.1.89.35.1.38.32.1.1
Application port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

rsMLBAgingTime 1.3.6.1.4.1.89.35.1.38.32.1.2
define the aging time for the aplication port in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

rsMLBAgingTimeStatus 1.3.6.1.4.1.89.35.1.38.32.1.3
Administrative status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsMLBdummy16 1.3.6.1.4.1.89.35.1.38.32.2
Dummy variable for stopping getnext.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER