MP-ATM-MIB

File: MP-ATM-MIB.mib (205739 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215 ATM-MIB

Imported symbols

mgmt NetworkAddress IpAddress
Counter Gauge TimeTicks
ifIndex OBJECT-TYPE TRAP-TYPE
AtmTrafficDescrParamIndex

Defined Types

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

NetPrefix  
OCTET STRING Size(13)    

DisplayString  
OCTET STRING    

DateAndTime  
OCTET STRING Size(8|11)    

MacAddress  
OCTET STRING Size(6)    

PhysAddress  
OCTET STRING Size(6)    

AtmAddr  
OCTET STRING Size(0|8|20)    

MpAtmCCCladType  
INTEGER com(1), mux(2), atm-uni(3), atm-trunk(4), atm-uni-vmc(5), lvc(6), ffr(7), odt(8), ces(9), ins(10), sel(11), eth(12), atm-trunk-cdm(13)    

MpAtmCCStaticPvpEntry  
SEQUENCE    
  mpAtmCCStaticPvpIndex INTEGER
  mpAtmCCStaticPvpLowIfIndex INTEGER
  mpAtmCCStaticPvpLowVpi INTEGER
  mpAtmCCStaticPvpHighIfIndex INTEGER
  mpAtmCCStaticPvpHighVpi INTEGER
  mpAtmCCStaticPvpLowReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCStaticPvpLowTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCStaticPvpHighReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCStaticPvpHighTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCStaticPvpPriority INTEGER
  mpAtmCCStaticPvpLowCladType MpAtmCCCladType
  mpAtmCCStaticPvpHighCladType MpAtmCCCladType
  mpAtmCCStaticPvpAdminStatus INTEGER
  mpAtmCCStaticPvpOperStatus INTEGER
  mpAtmCCStaticPvpPvpId INTEGER
  mpAtmCCStaticPvpSeqNo INTEGER
  mpAtmCCStaticPvpPgcRequest INTEGER
  mpAtmCCStaticPvpCfgStatus INTEGER
  mpAtmCCStaticPvpErrInfo INTEGER

MpAtmCCStaticPvcEntry  
SEQUENCE    
  mpAtmCCStaticPvcIndex INTEGER
  mpAtmCCStaticPvcLowIfIndex INTEGER
  mpAtmCCStaticPvcLowVpi INTEGER
  mpAtmCCStaticPvcLowVci INTEGER
  mpAtmCCStaticPvcHighIfIndex INTEGER
  mpAtmCCStaticPvcHighVpi INTEGER
  mpAtmCCStaticPvcHighVci INTEGER
  mpAtmCCStaticPvcLowReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCStaticPvcLowTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCStaticPvcHighReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCStaticPvcHighTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCStaticPvcPriority INTEGER
  mpAtmCCStaticPvcLowCladType MpAtmCCCladType
  mpAtmCCStaticPvcHighCladType MpAtmCCCladType
  mpAtmCCStaticPvcAdminStatus INTEGER
  mpAtmCCStaticPvcOperStatus INTEGER
  mpAtmCCStaticPvcPvcId INTEGER
  mpAtmCCStaticPvcSeqNo INTEGER
  mpAtmCCStaticPvcPgcRequest INTEGER
  mpAtmCCStaticPvcCfgStatus INTEGER
  mpAtmCCStaticPvcErrInfo INTEGER

MpAtmCCSoftPvpEntry  
SEQUENCE    
  mpAtmCCSoftPvpLeafReference INTEGER
  mpAtmCCSoftPvpIfIndex INTEGER
  mpAtmCCSoftPvpVpi INTEGER
  mpAtmCCSoftPvpReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCSoftPvpTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCSoftPvpTargetAddress AtmAddr
  mpAtmCCSoftPvpTargetVpi INTEGER
  mpAtmCCSoftPvpLastReleaseCause INTEGER
  mpAtmCCSoftPvpLastReleaseDiagnostic OCTET STRING
  mpAtmCCSoftPvpPriority INTEGER
  mpAtmCCSoftPvpCladType MpAtmCCCladType
  mpAtmCCSoftPvpOriginalAddress AtmAddr
  mpAtmCCSoftPvpAdminStatus INTEGER
  mpAtmCCSoftPvpOperStatus INTEGER
  mpAtmCCSoftPvpPgcRequest INTEGER
  mpAtmCCSoftPvpCfgStatus INTEGER
  mpAtmCCSoftPvpErrInfo INTEGER

MpAtmCCSoftPvcEntry  
SEQUENCE    
  mpAtmCCSoftPvcLeafReference INTEGER
  mpAtmCCSoftPvcIfIndex INTEGER
  mpAtmCCSoftPvcVpi INTEGER
  mpAtmCCSoftPvcVci INTEGER
  mpAtmCCSoftPvcReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCSoftPvcTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCSoftPvcTargetAddress AtmAddr
  mpAtmCCSoftPvcTargetVpi INTEGER
  mpAtmCCSoftPvcTargetVci INTEGER
  mpAtmCCSoftPvcLastReleaseCause INTEGER
  mpAtmCCSoftPvcLastReleaseDiagnostic OCTET STRING
  mpAtmCCSoftPvcPriority INTEGER
  mpAtmCCSoftPvcCladType MpAtmCCCladType
  mpAtmCCSoftPvcOriginalAddress AtmAddr
  mpAtmCCSoftPvcAdminStatus INTEGER
  mpAtmCCSoftPvcOperStatus INTEGER
  mpAtmCCSoftPvcPgcRequest INTEGER
  mpAtmCCSoftPvcCfgStatus INTEGER
  mpAtmCCSoftPvcErrInfo INTEGER

MpAtmCCSoftPvpCalledEntry  
SEQUENCE    
  mpAtmCCSoftPvpCalledLeafReference INTEGER
  mpAtmCCSoftPvpCalledIfIndex INTEGER
  mpAtmCCSoftPvpCalledVpi INTEGER
  mpAtmCCSoftPvpCalledReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCSoftPvpCalledTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCSoftPvpCalledTargetAddress AtmAddr
  mpAtmCCSoftPvpCalledTargetVpi INTEGER
  mpAtmCCSoftPvpCalledLastReleaseCause INTEGER
  mpAtmCCSoftPvpCalledLastReleaseDiagnostic OCTET STRING
  mpAtmCCSoftPvpCalledPriority INTEGER
  mpAtmCCSoftPvpCalledCladType MpAtmCCCladType
  mpAtmCCSoftPvpCalledOriginalAddress AtmAddr
  mpAtmCCSoftPvpCalledAdminStatus INTEGER
  mpAtmCCSoftPvpCalledOperStatus INTEGER
  mpAtmCCSoftPvpCalledPgcRequest INTEGER
  mpAtmCCSoftPvpCalledCfgStatus INTEGER
  mpAtmCCSoftPvpCalledErrInfo INTEGER

MpAtmCCSoftPvcCalledEntry  
SEQUENCE    
  mpAtmCCSoftPvcCalledLeafReference INTEGER
  mpAtmCCSoftPvcCalledIfIndex INTEGER
  mpAtmCCSoftPvcCalledVpi INTEGER
  mpAtmCCSoftPvcCalledVci INTEGER
  mpAtmCCSoftPvcCalledReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCSoftPvcCalledTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCSoftPvcCalledTargetAddress AtmAddr
  mpAtmCCSoftPvcCalledTargetVpi INTEGER
  mpAtmCCSoftPvcCalledTargetVci INTEGER
  mpAtmCCSoftPvcCalledLastReleaseCause INTEGER
  mpAtmCCSoftPvcCalledLastReleaseDiagnostic OCTET STRING
  mpAtmCCSoftPvcCalledPriority INTEGER
  mpAtmCCSoftPvcCalledCladType MpAtmCCCladType
  mpAtmCCSoftPvcCalledOriginalAddress AtmAddr
  mpAtmCCSoftPvcCalledAdminStatus INTEGER
  mpAtmCCSoftPvcCalledOperStatus INTEGER
  mpAtmCCSoftPvcCalledPgcRequest INTEGER
  mpAtmCCSoftPvcCalledCfgStatus INTEGER
  mpAtmCCSoftPvcCalledErrInfo INTEGER

MpAtmCCVpStatisticsEntry  
SEQUENCE    
  mpAtmCCVpStatVpi INTEGER
  mpAtmCCVpStatInCells OCTET STRING
  mpAtmCCVpStatInCellsCounters Counter
  mpAtmCCVpStatOutCells OCTET STRING
  mpAtmCCVpStatOutCellsCounters Counter
  mpAtmCCVpStatInDropCells OCTET STRING
  mpAtmCCVpStatInDropCellsCounters Counter

MpAtmCCVcStatisticsEntry  
SEQUENCE    
  mpAtmCCVcStatVpi INTEGER
  mpAtmCCVcStatVci INTEGER
  mpAtmCCVcStatInCells OCTET STRING
  mpAtmCCVcStatInCellsCounters Counter
  mpAtmCCVcStatOutCells OCTET STRING
  mpAtmCCVcStatOutCellsCounters Counter
  mpAtmCCVcStatInDropCells OCTET STRING
  mpAtmCCVcStatInDropCellsCounters Counter

MpAtmCCOuspStatisticsEntry  
SEQUENCE    
  mpAtmCCOuspStatIndex INTEGER
  mpAtmCCOuspStatRcvCrcErrCellsCounters Counter
  mpAtmCCOuspStatSendOfifoFullCounters Counter
  mpAtmCCOuspStatRcvBufOverCounters Counter
  mpAtmCCOuspStatRcvUnknownCellsCounters Counter
  mpAtmCCOuspStatRcvInvalidCellsCounters Counter
  mpAtmCCOuspStatSendScheduleErrorCounters Counter
  mpAtmCCOuspStatRcvScheduleErrorCounters Counter
  mpAtmCCOuspStatSendInvalidCdvCounters Counter

MpAtmCCPhyStatisticsEntry  
SEQUENCE    
  mpAtmCCPhyStatTmtCellsCounters Counter
  mpAtmCCPhyStatRcvCellsCounters Counter
  mpAtmCCPhyStatCorrectHecErrCounters Counter
  mpAtmCCPhyStatUncorrectHecErrCounters Counter
  mpAtmCCPhyStatB1ErrCounters Counter
  mpAtmCCPhyStatB2ErrCounters Counter
  mpAtmCCPhyStatB3ErrCounters Counter
  mpAtmCCPhyStatFebeCounters Counter
  mpAtmCCPhyStatSymbolErrCounters Counter
  mpAtmCCPhyStatParityErrCounters Counter

MpAtmCCPortAlarmStatisticsEntry  
SEQUENCE    
  mpAtmCCPortAlarmStatRedLosCounters Counter
  mpAtmCCPortAlarmStatRedLofCounters Counter
  mpAtmCCPortAlarmStatRedMsAisCounters Counter
  mpAtmCCPortAlarmStatRedLopCounters Counter
  mpAtmCCPortAlarmStatRedPAisCounters Counter
  mpAtmCCPortAlarmStatRedLocCounters Counter
  mpAtmCCPortAlarmStatRedResetCounters Counter
  mpAtmCCPortAlarmStatRedCcRedCounters Counter
  mpAtmCCPortAlarmStatRedOofCounters Counter
  mpAtmCCPortAlarmStatRedAisCounters Counter
  mpAtmCCPortAlarmStatRedPOofCounters Counter
  mpAtmCCPortAlarmStatRedBadSigCounters Counter
  mpAtmCCPortAlarmStatRedLcdCounters Counter
  mpAtmCCPortAlarmStatRedLinkAisCounters Counter
  mpAtmCCPortAlarmStatRedInfo0Counters Counter
  mpAtmCCPortAlarmStatYelMsRdiCounters Counter
  mpAtmCCPortAlarmStatYelPRdiCounters Counter
  mpAtmCCPortAlarmStatYelCcYelCounters Counter
  mpAtmCCPortAlarmStatYelRaiCounters Counter
  mpAtmCCPortAlarmStatYelPRaiCounters Counter
  mpAtmCCPortAlarmStatYelInfo2Counters Counter

MpAtmCCVpTunnellingStatisticsEntry  
SEQUENCE    
  mpAtmCCVpTunStatTmtCellsCounters Counter
  mpAtmCCVpTunStatRcvCellsCounters Counter

MpAtmCCVccStatisticsRegEntry  
SEQUENCE    
  mpAtmCCVccStatRegVpi INTEGER
  mpAtmCCVccStatRegVci INTEGER
  mpAtmCCVccStatRegInCellsCounters Counter
  mpAtmCCVccStatRegOutCellsCounters Counter
  mpAtmCCVccStatRegStatus INTEGER
  mpAtmCCVccStatRegErrInfo INTEGER

MpAtmCCPortResourceInfomationEntry  
SEQUENCE    
  mpAtmCCPortResInfoPortSpeed Gauge
  mpAtmCCPortResInfoMaxVpiBits INTEGER
  mpAtmCCPortResInfoMaxVciBits INTEGER
  mpAtmCCPortResInfoMaxVPC INTEGER
  mpAtmCCPortResInfoMaxVCC INTEGER
  mpAtmCCPortResInfoMaxSvpcVpi INTEGER
  mpAtmCCPortResInfoMaxSvccVpi INTEGER
  mpAtmCCPortResInfoMinSvccVci INTEGER
  mpAtmCCPortResInfoShaperKind INTEGER
  mpAtmCCPortResInfoVpTunnellingConfig INTEGER
  mpAtmCCPortResInfoSvccVciHuntWay INTEGER
  mpAtmCCPortResInfoVpiCounters Counter
  mpAtmCCPortResInfoVpcCounters Counter
  mpAtmCCPortResInfoVccCounters Counter

MpAtmCCPortBandwidthInfomationEntry  
SEQUENCE    
  mpAtmCCPortBwInfoVpi INTEGER
  mpAtmCCPortBwInfoRawBandwidthBps INTEGER
  mpAtmCCPortBwInfoRawBandwidthCps INTEGER
  mpAtmCCPortBwInfoTmitUsedBwCps INTEGER
  mpAtmCCPortBwInfoRcvUsedBwCps INTEGER
  mpAtmCCPortBwInfoVciCounters Counter

MpAtmCCBwInfoPortEntry  
SEQUENCE    
  mpAtmCCBwInfoPortRawBandwidthBps INTEGER
  mpAtmCCBwInfoPortRawBandwidthCps INTEGER
  mpAtmCCBwInfoPortTmitUsedBwCps INTEGER
  mpAtmCCBwInfoPortRcvUsedBwCps INTEGER
  mpAtmCCBwInfoPortTmitRemainBwCps INTEGER
  mpAtmCCBwInfoPortRcvRemainBwCps INTEGER
  mpAtmCCBwInfoPortVpTunneling INTEGER

MpAtmCCSscopEntry  
SEQUENCE    
  mpAtmCCSscopTimerPoll INTEGER
  mpAtmCCSscopTimerNoResponce INTEGER
  mpAtmCCSscopTimerKeepAlive INTEGER
  mpAtmCCSscopTimerIdle INTEGER
  mpAtmCCSscopTimerCc INTEGER
  mpAtmCCSscopMaxCc INTEGER
  mpAtmCCSscopMaxPd INTEGER
  mpAtmCCSscopMaxStat INTEGER
  mpAtmCCSscopClearBuffs INTEGER
  mpAtmCCSscopCredit INTEGER

MpAtmCCIlmiEntry  
SEQUENCE    
  mpAtmCCIlmiConfigStatus INTEGER
  mpAtmCClmiMaxTransmissions INTEGER
  mpAtmCCIlmiRetransmitInterval INTEGER

MpAtmCCSignallingEntry  
SEQUENCE    
  mpAtmCCSignallingT301 INTEGER
  mpAtmCCSignallingT303 INTEGER
  mpAtmCCSignallingT308 INTEGER
  mpAtmCCSignallingT309 INTEGER
  mpAtmCCSignallingT310 INTEGER
  mpAtmCCSignallingT313 INTEGER
  mpAtmCCSignallingT316 INTEGER
  mpAtmCCSignallingT317 INTEGER
  mpAtmCCSignallingT322 INTEGER
  mpAtmCCSignallingT331 INTEGER
  mpAtmCCSignallingT397 INTEGER
  mpAtmCCSignallingT398 INTEGER
  mpAtmCCSignallingT399 INTEGER

MpAtmCCProtocolTrapInfoEntry  
SEQUENCE    
  mpAtmCCProtocolTrapInfoIndex INTEGER
  mpAtmCCProtocolTrapInfoCause INTEGER

MpAtmCCVccStatusEntry  
SEQUENCE    
  mpAtmCCVccStatusOrgPort INTEGER
  mpAtmCCVccStatusOrgVpi INTEGER
  mpAtmCCVccStatusOrgVci INTEGER
  mpAtmCCVccStatusDestPort INTEGER
  mpAtmCCVccStatusDestVpi INTEGER
  mpAtmCCVccStatusDestVci INTEGER
  mpAtmCCVccStatusPathKind INTEGER
  mpAtmCCVccStatusOrgCallKind INTEGER
  mpAtmCCVccStatusDestCallKind INTEGER
  mpAtmCCVccStatusAdminStatus INTEGER
  mpAtmCCVccStatusOperStatus INTEGER
  mpAtmCCVccStatusInsStatus INTEGER
  mpAtmCCVccStatusOrgPortVpTunneling INTEGER
  mpAtmCCVccStatusDestPortVpTunneling INTEGER
  mpAtmCCVccStatusConnCastType INTEGER

MpAtmCCPvcTraceCtlEntry  
SEQUENCE    
  mpAtmCCPvcTraceIndex INTEGER
  mpAtmCCPvcTraceCtlPathKind INTEGER
  mpAtmCCPvcTraceCtlIfIndex INTEGER
  mpAtmCCPvcTraceCtlVpi INTEGER
  mpAtmCCPvcTraceCtlVci INTEGER
  mpAtmCCPvcTraceCtlStatus INTEGER

MpAtmCCPvcTraceInfoEntry  
SEQUENCE    
  mpAtmCCPvcTraceEntryIndex INTEGER
  mpAtmCCPvcTraceInfoSysName DisplayString
  mpAtmCCPvcTraceInfoIfIndex INTEGER
  mpAtmCCPvcTraceInfoVpi INTEGER
  mpAtmCCPvcTraceInfoVci INTEGER
  mpAtmCCPvcTraceInfoPathKind INTEGER
  mpAtmCCPvcTraceInfoCallKind INTEGER
  mpAtmCCPvcTraceInfoLastSegment INTEGER

MpAtmCCVpTunnelingEntry  
SEQUENCE    
  mpAtmCCVpTunnelingVpi INTEGER
  mpAtmCCVpTunnelingAdminStatus INTEGER
  mpAtmCCVpTunnelingOperStatus INTEGER
  mpAtmCCVpTunnelingSpeed INTEGER
  mpAtmCCVpTunnelingNeighborInfo INTEGER
  mpAtmCCVpTunnelingPnniVer INTEGER
  mpAtmCCVpTunnelingContinuityCheck INTEGER
  mpAtmCCVpTunnelingTrapState INTEGER
  mpAtmCCVpTunnelingSeverity INTEGER
  mpAtmCCVpTunnelingCfgStatus INTEGER
  mpAtmCCVpTunnelingErrInfo INTEGER

MpAtmCCPathTestEntry  
SEQUENCE    
  mpAtmCCPathTestVpi INTEGER
  mpAtmCCPathTestVci INTEGER
  mpAtmCCPathTestStatus INTEGER
  mpAtmCCPathTestSendDirection INTEGER
  mpAtmCCPathTestSendTime INTEGER
  mpAtmCCPathTestSendCellsCounters Counter
  mpAtmCCPathTestRcvCellsCounters Counter
  mpAtmCCPathTestErrInfo INTEGER

MpAtmCCUpgcCtlEntry  
SEQUENCE    
  mpAtmCCUpgcIndex INTEGER
  mpAtmCCUpgcCtlStatus INTEGER
  mpAtmCCUpgcCtlCountPgc INTEGER
  mpAtmCCUpgcCtlResult INTEGER

MpAtmCCUpgcRegiEntry  
SEQUENCE    
  mpAtmCCUpgcPgcIndex INTEGER
  mpAtmCCUpgcRegiStatus INTEGER

MpAtmCCPgcCtlEntry  
SEQUENCE    
  mpAtmCCPgcIndex INTEGER
  mpAtmCCPgcCtlStatus INTEGER
  mpAtmCCPgcCtlCountPvc INTEGER
  mpAtmCCPgcCtlResult INTEGER

MpAtmCCPgcRegiEntry  
SEQUENCE    
  mpAtmCCPgcPvcIfIndex INTEGER
  mpAtmCCPgcPvcVpi INTEGER
  mpAtmCCPgcPvcVci INTEGER
  mpAtmCCPgcPvcKind INTEGER
  mpAtmCCPgcStaticPvcDestIfIndex INTEGER
  mpAtmCCPgcSoftPvcDestAtmAddress AtmAddr
  mpAtmCCPgcPvcDestVpi INTEGER
  mpAtmCCPgcPvcDestVci INTEGER
  mpAtmCCPgcPvcReceiveTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCPgcPvcTransmitTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCPgcPvcPriority INTEGER
  mpAtmCCPgcStaticPvcId INTEGER
  mpAtmCCPgcStaticPvcSeqNo INTEGER
  mpAtmCCPgcSoftPvcCallKind INTEGER
  mpAtmCCPgcRegiAdminStatus INTEGER
  mpAtmCCPgcRegiCfgStatus INTEGER
  mpAtmCCPgcRegiErrInfo INTEGER

MpAtmCCPgcActInfoEntry  
SEQUENCE    
  mpAtmCCPgcActGrpNum INTEGER

MpAtmCCAtmMultiCtlEntry  
SEQUENCE    
  mpAtmCCAtmMultiIfIndex INTEGER
  mpAtmCCAtmMultiVpi INTEGER
  mpAtmCCAtmMultiVci INTEGER
  mpAtmCCAtmMultiAdminStatus INTEGER
  mpAtmCCAtmMultiOperStatus INTEGER
  mpAtmCCAtmMultiErrInfo INTEGER

MpAtmCCAtmMultiConfEntry  
SEQUENCE    
  mpAtmCCAtmMultiConfRootIfIndex INTEGER
  mpAtmCCAtmMultiConfRootVpi INTEGER
  mpAtmCCAtmMultiConfRootVci INTEGER
  mpAtmCCAtmMultiConfLeafIfIndex INTEGER
  mpAtmCCAtmMultiConfLeafVpi INTEGER
  mpAtmCCAtmMultiConfLeafVci INTEGER
  mpAtmCCAtmMultiConfRootAdminStatus INTEGER
  mpAtmCCAtmMultiConfRootOperStatus INTEGER
  mpAtmCCAtmMultiConfLeafAdminStatus INTEGER
  mpAtmCCAtmMultiConfLeafOperStatus INTEGER
  mpAtmCCAtmMultiConfTrafficDescrIndex AtmTrafficDescrParamIndex
  mpAtmCCAtmMultiConfSlotNumber INTEGER
  mpAtmCCAtmMultiConfVcRdiResponse INTEGER
  mpAtmCCAtmMultiConfPvcId INTEGER
  mpAtmCCAtmMultiConfSeqNo INTEGER
  mpAtmCCAtmMultiConfShaperRate INTEGER
  mpAtmCCAtmMultiConfRootVpTunneling INTEGER
  mpAtmCCAtmMultiConfLeafVpTunneling INTEGER
  mpAtmCCAtmMultiConfNextLeaf INTEGER

Defined Values

org 1.3
OBJECT IDENTIFIER    

dod 1.3.6
OBJECT IDENTIFIER    

internet 1.3.6.1
OBJECT IDENTIFIER    

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

nec 1.3.6.1.4.1.119
OBJECT IDENTIFIER    

necProduct 1.3.6.1.4.1.119.1
OBJECT IDENTIFIER    

datax 1.3.6.1.4.1.119.1.3
OBJECT IDENTIFIER    

mmpf 1.3.6.1.4.1.119.1.3.13
OBJECT IDENTIFIER    

mmn9110 1.3.6.1.4.1.119.1.3.13.1
OBJECT IDENTIFIER    

mmn9120 1.3.6.1.4.1.119.1.3.13.2
OBJECT IDENTIFIER    

nec-mib 1.3.6.1.4.1.119.2
OBJECT IDENTIFIER    

necProductDepend 1.3.6.1.4.1.119.2.3
OBJECT IDENTIFIER    

datax-mib 1.3.6.1.4.1.119.2.3.3
OBJECT IDENTIFIER    

mmpf-mib 1.3.6.1.4.1.119.2.3.3.13
OBJECT IDENTIFIER    

mpSystem 1.3.6.1.4.1.119.2.3.3.13.1
OBJECT IDENTIFIER    

mpIfCard 1.3.6.1.4.1.119.2.3.3.13.2
OBJECT IDENTIFIER    

mpEtherPort 1.3.6.1.4.1.119.2.3.3.13.3
OBJECT IDENTIFIER    

mpVlan 1.3.6.1.4.1.119.2.3.3.13.4
OBJECT IDENTIFIER    

mpBridge 1.3.6.1.4.1.119.2.3.3.13.5
OBJECT IDENTIFIER    

mpDbAccess 1.3.6.1.4.1.119.2.3.3.13.6
OBJECT IDENTIFIER    

mpEventLog 1.3.6.1.4.1.119.2.3.3.13.7
OBJECT IDENTIFIER    

mpUiSession 1.3.6.1.4.1.119.2.3.3.13.8
OBJECT IDENTIFIER    

mpFtp 1.3.6.1.4.1.119.2.3.3.13.9
OBJECT IDENTIFIER    

mpDhcp 1.3.6.1.4.1.119.2.3.3.13.10
OBJECT IDENTIFIER    

mpIp 1.3.6.1.4.1.119.2.3.3.13.11
OBJECT IDENTIFIER    

mpRip 1.3.6.1.4.1.119.2.3.3.13.12
OBJECT IDENTIFIER    

mpSnmp 1.3.6.1.4.1.119.2.3.3.13.13
OBJECT IDENTIFIER    

mpStats 1.3.6.1.4.1.119.2.3.3.13.14
OBJECT IDENTIFIER    

mpCli 1.3.6.1.4.1.119.2.3.3.13.15
OBJECT IDENTIFIER    

mpAtm 1.3.6.1.4.1.119.2.3.3.13.16
OBJECT IDENTIFIER    

mpLis 1.3.6.1.4.1.119.2.3.3.13.17
OBJECT IDENTIFIER    

mpDns 1.3.6.1.4.1.119.2.3.3.13.18
OBJECT IDENTIFIER    

mpLec 1.3.6.1.4.1.119.2.3.3.13.19
OBJECT IDENTIFIER    

mpMpc 1.3.6.1.4.1.119.2.3.3.13.20
OBJECT IDENTIFIER    

mpStp 1.3.6.1.4.1.119.2.3.3.13.21
OBJECT IDENTIFIER    

mpLlc 1.3.6.1.4.1.119.2.3.3.13.22
OBJECT IDENTIFIER    

mpOspf 1.3.6.1.4.1.119.2.3.3.13.23
OBJECT IDENTIFIER    

mpObsCtl 1.3.6.1.4.1.119.2.3.3.13.101
OBJECT IDENTIFIER    

mpCardInfo 1.3.6.1.4.1.119.2.3.3.13.102
OBJECT IDENTIFIER    

mpInterface 1.3.6.1.4.1.119.2.3.3.13.103
OBJECT IDENTIFIER    

mpPvoice 1.3.6.1.4.1.119.2.3.3.13.104
OBJECT IDENTIFIER    

mpAtmCallCtl 1.3.6.1.4.1.119.2.3.3.13.110
OBJECT IDENTIFIER    

mpCes 1.3.6.1.4.1.119.2.3.3.13.111
OBJECT IDENTIFIER    

mpIpsw 1.3.6.1.4.1.119.2.3.3.13.112
OBJECT IDENTIFIER    

mpInsCtl 1.3.6.1.4.1.119.2.3.3.13.113
OBJECT IDENTIFIER    

mpFfr 1.3.6.1.4.1.119.2.3.3.13.114
OBJECT IDENTIFIER    

mpAtmCCBaseGroup 1.3.6.1.4.1.119.2.3.3.13.110.1
OBJECT IDENTIFIER    

mpAtmCCNextTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.1.1
A unique value to identify ATM Traffic Descriptor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCNextNodeVci 1.3.6.1.4.1.119.2.3.3.13.110.1.2
A unique value to identify Node VCI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPVPC 1.3.6.1.4.1.119.2.3.3.13.110.2
OBJECT IDENTIFIER    

mpAtmCCStaticPvpTable 1.3.6.1.4.1.119.2.3.3.13.110.2.1
Static-PVP Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCStaticPvpEntry

mpAtmCCStaticPvpEntry 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1
Static-PVP Entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCStaticPvpEntry  

mpAtmCCStaticPvpIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.1
A unique value to identify this Static-PVP. The value is used only 1 (p2p).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..2147483647  

mpAtmCCStaticPvpLowIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.2
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this Static-PVP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvpLowVpi 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.3
The value of this object is equal to the VPI value at the ATM interface associated with the Static-PVP that is identified by mpAtmCCStaticPvcLowIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the low ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..4095  

mpAtmCCStaticPvpHighIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.4
The value of this object is equal to MIB II's ifIndex value for the ATM interface port for this static-PVP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvpHighVpi 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.5
The value of this object is equal to the VPI value at the ATM interface associated with the Static-PVP that is identified by mpAtmCCStaticPvcHighIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the high ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..4095  

mpAtmCCStaticPvpLowReceiveTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.6
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the receive direction of this Static-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCStaticPvpLowTransmitTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.7
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the transmit direction of this Static-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCStaticPvpHighReceiveTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.8
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the receive direction of this Static-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCStaticPvpHighTransmitTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.9
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the transmit direction of this Static-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCStaticPvpPriority 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.10
Connection priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

mpAtmCCStaticPvpLowCladType 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.11
CLAD Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  MpAtmCCCladType  

mpAtmCCStaticPvpHighCladType 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.12
CLAD Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  MpAtmCCCladType  

mpAtmCCStaticPvpAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.13
The value of this object identifies the desired administrative status of this Static-PVP. The up and down states indicate that the traffic flow is enabled and disabled respectively on this Static-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCStaticPvpOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.14
The value of this object identifies the desired operational status of this Static-PVP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvpPvpId 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.15
The value of this object identifies the desired cross connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvpSeqNo 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.16
Order information in the cross connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvpPgcRequest 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.17
Indicates whether this PVP was configureated from the PVC-Group-Cutover function. The value of '0' indicates that this PVP was normal. The value of '!=0' indicates that this PVP was configrated form PVC-Group-Cutover function. In this case, the value was indicated the PVC-Group Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvpCfgStatus 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.98
Configuration setting start object. If this object is set the setting of the configuration is started.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), cancel(2), delete(3), unknown(4)  

mpAtmCCStaticPvpErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.2.1.1.99
Object that the configuration setting result is set up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvcTable 1.3.6.1.4.1.119.2.3.3.13.110.2.2
Static-PVC Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCStaticPvcEntry

mpAtmCCStaticPvcEntry 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1
Static-PVC Entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCStaticPvcEntry  

mpAtmCCStaticPvcIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.1
A unique value to identify this Static-PVC. The value is used only 1 (p2p).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..2147483647  

mpAtmCCStaticPvcLowIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.2
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this Static-PVC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvcLowVpi 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.3
The value of this object is equal to the VPI value at the ATM interface associated with the Static-PVC that is identified by mpAtmCCStaticPvcLowIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the low ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..4095  

mpAtmCCStaticPvcLowVci 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.4
The value of this object is equal to the VCI value at the ATM interface associated with this Static-PVC that is identified by mpAtmCCStaticPvcLowIfIndex. The VCI value cannot exceed the number supported by the atmInterfaceMaxVciBits at the low ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..65535  

mpAtmCCStaticPvcHighIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.5
The value of this object is equal to MIB II's ifIndex value for the ATM interface port for this static-PVC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvcHighVpi 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.6
The value of this object is equal to the VPI value at the ATM interface associated with the Static-PVC that is identified by mpAtmCCStaticPvcHighIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the high ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..4095  

mpAtmCCStaticPvcHighVci 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.7
The value of this object is equal to the VCI value at the ATM interface associated with the static-PVC that is identified by mpAtmCCStaticPvcHighIfIndex. The VCI value cannot exceed the number supported by the atmInterfaceMaxVciBits at the high ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..65535  

mpAtmCCStaticPvcLowReceiveTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.8
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the receive direction of this Static-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCStaticPvcLowTransmitTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.9
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the transmit direction of this Static-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCStaticPvcHighReceiveTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.10
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the receive direction of this Static-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCStaticPvcHighTransmitTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.11
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the transmit direction of this Static-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCStaticPvcPriority 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.12
Connection priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

mpAtmCCStaticPvcLowCladType 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.13
CLAD Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  MpAtmCCCladType  

mpAtmCCStaticPvcHighCladType 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.14
CLAD Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  MpAtmCCCladType  

mpAtmCCStaticPvcAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.15
The value of this object identifies the desired administrative status of this Static-PVC. The up and down states indicate that the traffic flow is enabled and disabled respectively on this Static-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCStaticPvcOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.16
The value of this object identifies the desired operational status of this Static-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvcPvcId 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.17
The value of this object identifies the desired cross connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvcSeqNo 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.18
Order information in the cross connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvcPgcRequest 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.19
Indicates whether this PVP was configureated from the PVC-Group-Cutover function. The value of '0' indicates that this PVP was normal. The value of '!=0' indicates that this PVP was configrated form PVC-Group-Cutover function. In this case, the value was indicated the PVC-Group Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCStaticPvcCfgStatus 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.98
Configuration setting start object. If this object is set the setting of the configuration is started.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), cancel(2), delete(3), unknown(4)  

mpAtmCCStaticPvcErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.2.2.1.99
Object that the configuration setting result is set up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPVPC 1.3.6.1.4.1.119.2.3.3.13.110.3
OBJECT IDENTIFIER    

mpAtmCCSoftPvpTable 1.3.6.1.4.1.119.2.3.3.13.110.3.1
Soft-PVP(Calling) Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCSoftPvpEntry

mpAtmCCSoftPvpEntry 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1
Soft-PVP(Calling) Entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCSoftPvpEntry  

mpAtmCCSoftPvpLeafReference 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.1
A unique value to identify this Soft-PVP. The value is used only 1 (p2p).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

mpAtmCCSoftPvpIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.2
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this Soft-PVP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvpVpi 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.3
The value of this object is equal to the VPI value at the ATM interface associated with the Soft-PVP that is identified by mpAtmCCSoftPvpIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvpReceiveTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.4
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the receive direction of this Soft-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCSoftPvpTransmitTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.5
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the transmit direction of this Soft-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCSoftPvpTargetAddress 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.6
The target ATM Address of this Soft-PVP. If no address is supplied, no attempts to establish the Soft-PVP are initiated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmAddr  

mpAtmCCSoftPvpTargetVpi 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.7
The VPI value of the VCL used at the target interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

mpAtmCCSoftPvpLastReleaseCause 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.8
Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft-PVP. Indicates the reason for the Release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

mpAtmCCSoftPvpLastReleaseDiagnostic 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.9
Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft-PVP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

mpAtmCCSoftPvpPriority 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.10
Connection priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

mpAtmCCSoftPvpCladType 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.11
CLAD Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  MpAtmCCCladType  

mpAtmCCSoftPvpOriginalAddress 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.12
The original ATM Address of this Soft-PVP. If no address is supplied, no attempts to establish the Soft-PVP are initiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtmAddr  

mpAtmCCSoftPvpAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.13
The value of this object identifies the desired administrative status of this Soft-PVP. The up and down states indicate that the traffic flow is enabled and disabled respectively on this Soft-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCSoftPvpOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.14
Soft-PVP Oper Status up/down = enable/disable
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvpPgcRequest 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.15
Indicates whether this PVP was configureated from the PVC-Group-Cutover function. The value of '0' indicates that this PVP was normal. The value of '!=0' indicates that this PVP was configrated form PVC-Group-Cutover function. In this case, the value was indicated the PVC-Group Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvpCfgStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.98
Configuration setting start object. If this object is set the setting of the configuration is started.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), cancel(2), delete(3), unknown(4)  

mpAtmCCSoftPvpErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.3.1.1.99
Object that the configuration setting result is set up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcTable 1.3.6.1.4.1.119.2.3.3.13.110.3.2
Soft-PVC(Calling) Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCSoftPvcEntry

mpAtmCCSoftPvcEntry 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1
Soft-PVC(Calling) Entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCSoftPvcEntry  

mpAtmCCSoftPvcLeafReference 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.1
A unique value to identify this Soft-PVC. The value is used only 1 (p2p).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

mpAtmCCSoftPvcIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.2
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this Soft-PVC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcVpi 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.3
The value of this object is equal to the VPI value at the ATM interface associated with the Soft-PVC that is identified by mpAtmCCSoftPvcIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcVci 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.4
The value of this object is equal to the VCI value at the ATM interface associated with the Soft-PVC that is identified by mpAtmCCSoftPvcIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVciBits at the ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcReceiveTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.5
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the receive direction of this Soft-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCSoftPvcTransmitTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.6
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the transmit direction of this Soft-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCSoftPvcTargetAddress 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.7
The target ATM Address of this Soft PVCC. If no address is supplied, no attempts to establish the Soft PVCC are initiated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmAddr  

mpAtmCCSoftPvcTargetVpi 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.8
The VPI value of the VCL used at the target interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

mpAtmCCSoftPvcTargetVci 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.9
The VCI value of the VCL used at the target interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

mpAtmCCSoftPvcLastReleaseCause 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.10
Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC. Indicates the reason for the Release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

mpAtmCCSoftPvcLastReleaseDiagnostic 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.11
Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

mpAtmCCSoftPvcPriority 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.12
Connection priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

mpAtmCCSoftPvcCladType 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.13
CLAD Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  MpAtmCCCladType  

mpAtmCCSoftPvcOriginalAddress 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.14
The origjnal ATM Address of this Soft PVCC. If no address is supplied, no attempts to establish the Soft PVCC are initiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtmAddr  

mpAtmCCSoftPvcAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.15
The value of this object identifies the desired administrative status of this Soft-PVC. The up and down states indicate that the traffic flow is enabled and disabled respectively on this Soft-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCSoftPvcOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.16
The value of this object identifies the desired operational status of this Soft-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcPgcRequest 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.17
Indicates whether this PVP was configureated from the PVC-Group-Cutover function. The value of '0' indicates that this PVP was normal. The value of '!=0' indicates that this PVP was configrated form PVC-Group-Cutover function. In this case, the value was indicated the PVC-Group Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcCfgStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.98
Configuration setting start object. If this object is set the setting of the configuration is started.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), cancel(2), delete(3), unknown(4)  

mpAtmCCSoftPvcErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.3.2.1.99
Object that the configuration setting result is set up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvpCalledTable 1.3.6.1.4.1.119.2.3.3.13.110.3.3
Soft-PVP(Called) Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCSoftPvpCalledEntry

mpAtmCCSoftPvpCalledEntry 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1
Soft-PVP(Called) Entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCSoftPvpCalledEntry  

mpAtmCCSoftPvpCalledLeafReference 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.1
A unique value to identify this Soft-PVP. The value is used only 1 (p2p).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

mpAtmCCSoftPvpCalledIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.2
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this Soft-PVP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvpCalledVpi 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.3
The value of this object is equal to the VPI value at the ATM interface associated with the Soft-PVP that is identified by mpAtmCCSoftPvpCalledIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvpCalledReceiveTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.4
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the receive direction of this Soft-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCSoftPvpCalledTransmitTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.5
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the transmit direction of this Soft-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCSoftPvpCalledTargetAddress 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.6
The target ATM Address of this Soft-PVP. If no address is supplied, no attempts to establish the Soft-PVP are initiated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmAddr  

mpAtmCCSoftPvpCalledTargetVpi 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.7
The VPI value of the VCL used at the target interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

mpAtmCCSoftPvpCalledLastReleaseCause 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.8
Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft-PVP. Indicates the reason for the Release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

mpAtmCCSoftPvpCalledLastReleaseDiagnostic 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.9
Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft-PVP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

mpAtmCCSoftPvpCalledPriority 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.10
Connection priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

mpAtmCCSoftPvpCalledCladType 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.11
CLAD Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  MpAtmCCCladType  

mpAtmCCSoftPvpCalledOriginalAddress 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.12
The original ATM Address of this Soft-PVP. If no address is supplied, no attempts to establish the Soft-PVP are initiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtmAddr  

mpAtmCCSoftPvpCalledAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.13
The value of this object identifies the desired administrative status of this Soft-PVP. The up and down states indicate that the traffic flow is enabled and disabled respectively on this Soft-PVP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCSoftPvpCalledOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.14
The value of this object identifies the desired operational status of this Soft-PVP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvpCalledPgcRequest 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.15
Indicates whether this PVP was configureated from the PVC-Group-Cutover function. The value of '0' indicates that this PVP was normal. The value of '!=0' indicates that this PVP was configrated form PVC-Group-Cutover function. In this case, the value was indicated the PVC-Group Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvpCalledCfgStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.98
Configuration setting start object. If this object is set the setting of the configuration is started.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), cancel(2), delete(3), unknown(4)  

mpAtmCCSoftPvpCalledErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.3.3.1.99
Object that the configuration setting result is set up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcCalledTable 1.3.6.1.4.1.119.2.3.3.13.110.3.4
Soft-PVC(Called) Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCSoftPvcCalledEntry

mpAtmCCSoftPvcCalledEntry 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1
Soft-PVC(Called) Entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCSoftPvcCalledEntry  

mpAtmCCSoftPvcCalledLeafReference 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.1
A unique value to identify this Soft-PVC. The value is used only 1 (p2p).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

mpAtmCCSoftPvcCalledIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.2
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this Soft-PVC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcCalledVpi 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.3
The value of this object is equal to the VPI value at the ATM interface associated with the Soft-PVC that is identified by mpAtmCCSoftPvcCalledIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcCalledVci 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.4
The value of this object is equal to the VCI value at the ATM interface associated with the Soft-PVC that is identified by mpAtmCCSoftPvcCalledIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVciBits at the ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcCalledReceiveTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.5
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the receive direction of this Soft-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCSoftPvcCalledTransmitTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.6
The value of this object identifies in the ATM Traffic Descriptor Table which applies to the transmit direction of this Soft-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCSoftPvcCalledTargetAddress 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.7
The target ATM Address of this Soft PVCC. If no address is supplied, no attempts to establish the Soft PVCC are initiated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmAddr  

mpAtmCCSoftPvcCalledTargetVpi 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.8
The VPI value of the VCL used at the target interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

mpAtmCCSoftPvcCalledTargetVci 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.9
The VCI value of the VCL used at the target interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

mpAtmCCSoftPvcCalledLastReleaseCause 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.10
Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC. Indicates the reason for the Release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..127  

mpAtmCCSoftPvcCalledLastReleaseDiagnostic 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.11
Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

mpAtmCCSoftPvcCalledPriority 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.12
Connection priority
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

mpAtmCCSoftPvcCalledCladType 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.13
CLAD Type
Status: mandatory Access: read-only
OBJECT-TYPE    
  MpAtmCCCladType  

mpAtmCCSoftPvcCalledOriginalAddress 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.14
The original ATM Address of this Soft PVCC. If no address is supplied, no attempts to establish the Soft PVCC are initiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtmAddr  

mpAtmCCSoftPvcCalledAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.15
The value of this object identifies the desired administrative status of this Soft-PVC. The up and down states indicate that the traffic flow is enabled and disabled respectively on this Soft-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCSoftPvcCalledOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.16
The value of this object identifies the desired operational status of this Soft-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcCalledPgcRequest 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.17
Indicates whether this PVC was configureated from the PVC-Group-Cutover function. The value of '0' indicates that this PVC was normal. The value of '!=0' indicates that this PVC was configrated form PVC-Group-Cutover function. In this case, the value was indicated the PVC-Group Number
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCSoftPvcCalledCfgStatus 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.98
Configuration setting start object. If this object is set the setting of the configuration is started.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), cancel(2), delete(3), unknown(4)  

mpAtmCCSoftPvcCalledErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.3.4.1.99
Object that the configuration setting result is set up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCStatistics 1.3.6.1.4.1.119.2.3.3.13.110.4
OBJECT IDENTIFIER    

mpAtmCCVpStatisticsTable 1.3.6.1.4.1.119.2.3.3.13.110.4.1
Indicate traffic counter information per connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCVpStatisticsEntry

mpAtmCCVpStatisticsEntry 1.3.6.1.4.1.119.2.3.3.13.110.4.1.1
Entry of traffic per connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCVpStatisticsEntry  

mpAtmCCVpStatVpi 1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.1
Indicate value for the specific VPI
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCVpStatInCells 1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.2
The number of receive cells 64 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

mpAtmCCVpStatInCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.3
The number of receive cells 32 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVpStatOutCells 1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.4
The number of transmit cells 64 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

mpAtmCCVpStatOutCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.5
The number of transmit cells 32 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVpStatInDropCells 1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.6
The number of receive drop cells 64 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

mpAtmCCVpStatInDropCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.1.1.7
The number of receive drop cells 32 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVcStatisticsTable 1.3.6.1.4.1.119.2.3.3.13.110.4.2
Indicate traffic counter information per connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCVcStatisticsEntry

mpAtmCCVcStatisticsEntry 1.3.6.1.4.1.119.2.3.3.13.110.4.2.1
Entry of traffic per connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCVcStatisticsEntry  

mpAtmCCVcStatVpi 1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.1
Indicate value for the specific VPI
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCVcStatVci 1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.2
Indicate value for the specific VCI
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCVcStatInCells 1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.3
The number of receive cells 64 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

mpAtmCCVcStatInCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.4
The number of receive cells 32 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVcStatOutCells 1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.5
The number of transmit cells 64 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

mpAtmCCVcStatOutCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.6
The number of transmit cells 32 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVcStatInDropCells 1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.7
The number of receive drop cells 64 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

mpAtmCCVcStatInDropCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.2.1.8
The number of receive drop cells 32 bit counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCOuspStatisticsTable 1.3.6.1.4.1.119.2.3.3.13.110.4.3
Quality information by the unit of card. All entrys are detected by the OUS-P.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCOuspStatisticsEntry

mpAtmCCOuspStatisticsEntry 1.3.6.1.4.1.119.2.3.3.13.110.4.3.1
An entry of mpAtmCCOuspStatisticsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCOuspStatisticsEntry  

mpAtmCCOuspStatIndex 1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.1
The index value at this table. It consist of card number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCOuspStatRcvCrcErrCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.2
The number of OAM cells received by the port with CRC errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCOuspStatSendOfifoFullCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.3
The number of cells discarded due to Out-FIFO overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCOuspStatRcvBufOverCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.4
The number of overflow cells at the reveive buffer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCOuspStatRcvUnknownCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.5
The number of cells received by the port with unknown cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCOuspStatRcvInvalidCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.6
The number of cells received by the port with invalid cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCOuspStatSendScheduleErrorCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.7
The number of transmission cells discaded due to fail the scheduling
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCOuspStatRcvScheduleErrorCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.8
The number of received cells discaded due to fail the scheduling
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCOuspStatSendInvalidCdvCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.3.1.9
The number of un-scheduling cells due to invalid CDV.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPhyStatisticsTable 1.3.6.1.4.1.119.2.3.3.13.110.4.4
Quality information by the unit of port. All entrys are detected by the PHY. This table are supports for ATM CARDs NOTE:ATM CARD ATM-S155, ATM-M155, 2TRK-45, 2TRK6.3I, ATRK-1.5I, ATRK-192K, 2UNI-VMC, 4ATM-25
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCPhyStatisticsEntry

mpAtmCCPhyStatisticsEntry 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1
An entry of mpAtmCCPhyStatisticsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCPhyStatisticsEntry  

mpAtmCCPhyStatTmtCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.1
The number of cells transmitted regardless of error status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPhyStatRcvCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.2
The number of cells received regardless of error status
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPhyStatCorrectHecErrCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.3
The number of cells reveived by the port with correctable HEC error. NOTE: At the 4ATM-25 card, this object incudeing the mpAtmCCPhyUncountCorrectHecErrCounters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPhyStatUncorrectHecErrCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.4
The number of cells reveived by the port with un-correctable HEC error. NOTE: At the 4ATM-25 card, this object is always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPhyStatB1ErrCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.5
The number of cells with B1 error. NOTE: At the 4ATM-25 card, this object is always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPhyStatB2ErrCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.6
The number of cells with B2 error. NOTE: This object is ATM-S155 and ATM-M155 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPhyStatB3ErrCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.7
The number of cells with B3 error NOTE: This object is ATM-S155 and ATM-M155 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPhyStatFebeCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.8
The number of cells with FEBE error. NOTE: At the 4ATM-25 card, this object is always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPhyStatSymbolErrCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.9
The number of cells with symbol error. NOTE: This object is 4ATM-25 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPhyStatParityErrCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.4.1.10
The number of cells with parity error. NOTE: At the 4ATM-25 card, this object is always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatisticsTable 1.3.6.1.4.1.119.2.3.3.13.110.4.5
Table of port alarm infomation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCPortAlarmStatisticsEntry

mpAtmCCPortAlarmStatisticsEntry 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1
An entry of mpAtmCCPortAlarmStatisticsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCPortAlarmStatisticsEntry  

mpAtmCCPortAlarmStatRedLosCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.1
Total number of LOS alarm detected by HW. NOTE: This object is ATM-S155, ATM-M155, 2ATM-45, 2UNI-VMC, 2TRK-6.3I, 4TRK-1.5I only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedLofCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.2
Total number of LOF alarm detected by HW. NOTE: This object is ATM-S155, ATM-M155, 2TRK-6.3I, 4TRK-1.5I only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedMsAisCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.3
Total number of MS-AIS alarm detected by HW. NOTE: This object is ATM-S155, ATM-M155 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedLopCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.4
Total number of LOP alarm detected by HW. NOTE: This object is ATM-S155, ATM-M155 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedPAisCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.5
Total number of P-AIS alarm detected by HW. NOTE: This object is ATM-S155, ATM-M155 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedLocCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.6
Total number of LOC alarm detected by HW. NOTE: This object is ATM-S155, ATM-M155 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedResetCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.7
Total number of Reset alarm detected by HW. NOTE: This object is ATM-S155, ATM-M155 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedCcRedCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.8
Total number of CC-RED alarm detected by HW. NOTE: This object is ATM CARDs only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedOofCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.9
Total number of OOF alarm detected by HW. NOTE: This object is 2ATM-45 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedAisCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.10
Total number of AIS alarm detected by HW. NOTE: This object is 2ATM-45, 2TRK-6.3I, 4TRK-1.5I only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedPOofCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.11
Total number of P-OOF alarm detected by HW. NOTE: This object is 2ATM-45, 2TRK-6.3I, 4TRK-1.5I only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedBadSigCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.12
Total number of Bad-sig alarm detected by HW. NOTE: This object is 4ATM-45 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedLcdCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.13
Total number of LCD alarm detected by HW. NOTE: This object is 2UNI-VMC, 2TRK-6.3I, 4TRK-1.5I, 2TRK-192K only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedLinkAisCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.14
Total number of LINK-AIS alarm detected by HW. NOTE: This object is 2TRK-6.3I, 4TRK-1.5I, 2TRK-192K only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatRedInfo0Counters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.15
Total number of INDO0 alarm detected by HW. NOTE: This object is 2TRK-192KI only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatYelMsRdiCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.16
Total number of MS-RDI alarm detected by HW. NOTE: This object is ATM-S155, ATM-M155 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatYelPRdiCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.17
Total number of P-RDI alarm detected by HW. NOTE: This object is ATM-S155, ATM-M155 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatYelCcYelCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.18
Total number of CC-YEL alarm detected by HW. NOTE: This object is ATM CARDs only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatYelRaiCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.19
Total number of RAI alarm detected by HW. NOTE: This object is 2ATM-45, 2TRK-6.3I, 4TRK-1.5I only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatYelPRaiCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.20
Total number of P-RAI alarm detected by HW. NOTE: This object is 2ATM-45 only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortAlarmStatYelInfo2Counters 1.3.6.1.4.1.119.2.3.3.13.110.4.5.1.21
Total number of INFO2 alarm detected by HW. NOTE: This object is 2TRK-192KI only. Other cards are always ZERO.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVpTunnellingStatisticsTable 1.3.6.1.4.1.119.2.3.3.13.110.4.6
This table indicate traffic counter information per VP-tunnelling.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCVpTunnellingStatisticsEntry

mpAtmCCVpTunnellingStatisticsEntry 1.3.6.1.4.1.119.2.3.3.13.110.4.6.1
An entry of mpAtmCCVpTunnellingStatisticsTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCVpTunnellingStatisticsEntry  

mpAtmCCVpTunStatTmtCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.6.1.1
The number of cells transmitted regardless of error status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVpTunStatRcvCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.6.1.2
The number of cells received regardless of error status
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVccStatisticsRegTable 1.3.6.1.4.1.119.2.3.3.13.110.4.7
Indicate traffic counter information per connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCVccStatisticsRegEntry

mpAtmCCVccStatisticsRegEntry 1.3.6.1.4.1.119.2.3.3.13.110.4.7.1
Entry of traffic per connection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCVccStatisticsRegEntry  

mpAtmCCVccStatRegVpi 1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.1
Indicate value for the specific VPI
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCVccStatRegVci 1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.2
Indicate value for the specific VCI
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCVccStatRegInCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.3
The number of receive cells
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVccStatRegOutCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.4
The number of transmit cells
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVccStatRegStatus 1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.5
This variable indicates the registratoin status. - 'start', which indicates that start and collecting the taffic information. - 'stop', which indicates that stopn and delete the traffic information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER start(1), stop(2)  

mpAtmCCVccStatRegErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.4.7.1.99
Indicats the result of setting to the mpAtmCCVccStatRegStatus.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCResourceControl 1.3.6.1.4.1.119.2.3.3.13.110.5
OBJECT IDENTIFIER    

mpAtmCCPortResourceInfomationTable 1.3.6.1.4.1.119.2.3.3.13.110.5.1
This table indicate the resource infomation at the ATM port. NOTE: This table is supported the physical port only.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCPortResourceInfomationEntry

mpAtmCCPortResourceInfomationEntry 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1
Entry of mpAtmCCPortResourceInfomationTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCPortResourceInfomationEntry  

mpAtmCCPortResInfoPortSpeed 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.1
The port's bandwidth in bit per second at this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

mpAtmCCPortResInfoMaxVpiBits 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.2
The number of VPI bits at this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortResInfoMaxVciBits 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.3
The number of VCI bits at this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortResInfoMaxVPC 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.4
The maximum number of VPCs ( PVPs and SVPs ) supported at this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortResInfoMaxVCC 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.5
The maximum number of VCCs ( PVCs and SVCs ) supported at this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortResInfoMaxSvpcVpi 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.6
The maximum VPI that the signaling stack on the ATM interface is configured to support for allocation to switched virtual path connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortResInfoMaxSvccVpi 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.7
The maximum VPI that the signaling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortResInfoMinSvccVci 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.8
The minimum VPI that the signalling stack is configured to support for allocation to switched virtual channel connections.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortResInfoShaperKind 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.9
The kind of shaper at this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), vp(2), vc(3), vpAndVc(4)  

mpAtmCCPortResInfoVpTunnellingConfig 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.10
Indicates whether the vp-tunnelling is configered at this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notConfigured(1), configured(2)  

mpAtmCCPortResInfoSvccVciHuntWay 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.11
This value indicates the way of VCI use at the SVCs. The value low2high indicates that hunt the lowest not-used VCI when received the SETUP message. The value low2high indicates that hunt the highest not-used VCI when received the SETUP message.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low2high(1), high2low(2)  

mpAtmCCPortResInfoVpiCounters 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.12
The number of using VPIs at this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortResInfoVpcCounters 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.13
The number of VPCs ( PVPs and SVPs ) established at this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortResInfoVccCounters 1.3.6.1.4.1.119.2.3.3.13.110.5.1.1.14
The number of VCCs ( PVCs and SVCs ) established at this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPortBandwidthInfomationTable 1.3.6.1.4.1.119.2.3.3.13.110.5.2
This table indicate that infom the bandwidth at the ATM port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCPortBandwidthInfomationEntry

mpAtmCCPortBandwidthInfomationEntry 1.3.6.1.4.1.119.2.3.3.13.110.5.2.1
Entry of mpAtmCCPortBandwidthInfomationTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCPortBandwidthInfomationEntry  

mpAtmCCPortBwInfoVpi 1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.1
A index value at this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortBwInfoRawBandwidthBps 1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.2
Adminsitratively desired bandwidth size in kilo bit per second for this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortBwInfoRawBandwidthCps 1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.3
Adminsitratively desired bandwidth size in cell per second for this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortBwInfoTmitUsedBwCps 1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.4
The current using transmission bandwidth value ( total of assigned bandwidth for each connections ) in cell per second for this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortBwInfoRcvUsedBwCps 1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.5
The current using receved bandwidth value ( total of assigned bandwidth for each connections ) in cell per second for this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPortBwInfoVciCounters 1.3.6.1.4.1.119.2.3.3.13.110.5.2.1.6
The number of using VCIs at this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCBwInfoPortTable 1.3.6.1.4.1.119.2.3.3.13.110.5.3
This table indicate the resource infomation at the ATM port and vp-tunneling port
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCBwInfoPortEntry

mpAtmCCBwInfoPortEntry 1.3.6.1.4.1.119.2.3.3.13.110.5.3.1
Entry of mpAtmCCBwInfoPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCBwInfoPortEntry  

mpAtmCCBwInfoPortRawBandwidthBps 1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.1
Adminsitratively desired bandwidth size in kilo bit per second for this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCBwInfoPortRawBandwidthCps 1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.2
Adminsitratively desired bandwidth size in cell per second for this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCBwInfoPortTmitUsedBwCps 1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.3
The current using transmission bandwidth value ( total of assigned bandwidth for each connections ) in cell per second for this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCBwInfoPortRcvUsedBwCps 1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.4
The current using receved bandwidth value ( total of assigned bandwidth for each connections ) in cell per second for this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCBwInfoPortTmitRemainBwCps 1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.5
The current remaining transmission bandwidth value ( total of assigned bandwidth for each connections ) in cell per second for this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCBwInfoPortRcvRemainBwCps 1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.6
The current remaining receved bandwidth value ( total of assigned bandwidth for each connections ) in cell per second for this ATM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCBwInfoPortVpTunneling 1.3.6.1.4.1.119.2.3.3.13.110.5.3.1.7
VP-Tunneling indication. 1:VP-Tunneling 2:Not VP-Tunneling
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

mpAtmCCProtocol 1.3.6.1.4.1.119.2.3.3.13.110.6
OBJECT IDENTIFIER    

mpAtmCCSscopTable 1.3.6.1.4.1.119.2.3.3.13.110.6.1
SSCOP parameter Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCSscopEntry

mpAtmCCSscopEntry 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1
Entry of mpATMCCSscopTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCSscopEntry  

mpAtmCCSscopTimerPoll 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.1
Expert variable: timer in milliseconds (default is 750 msecs for Uni 3.1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSscopTimerNoResponce 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.2
Expert variable: timer in milliseconds (default is 7000 msecs for Uni 3.1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSscopTimerKeepAlive 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.3
Expert variable: timer in milliseconds (default is 2000 msecs for Uni 3.1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSscopTimerIdle 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.4
Expert variable: timer in milliseconds (default is 1500 msecs for Uni 3.1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSscopTimerCc 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.5
Expert variable: timer in milliseconds (default is 1000 msecs for Uni 3.1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSscopMaxCc 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.6
Expert variable (default is 4 for Uni 3.1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSscopMaxPd 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.7
Expert variable (default is 25 for Uni 3.1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSscopMaxStat 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.8
Expert variable (default is 67 for Uni 3.1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSscopClearBuffs 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.9
Expert variable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mpAtmCCSscopCredit 1.3.6.1.4.1.119.2.3.3.13.110.6.1.1.10
Expert variable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mpAtmCCIlmiTable 1.3.6.1.4.1.119.2.3.3.13.110.6.2
ILMI parameter Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCIlmiEntry

mpAtmCCIlmiEntry 1.3.6.1.4.1.119.2.3.3.13.110.6.2.1
Entry of mpATMCCIlmiTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCIlmiEntry  

mpAtmCCIlmiConfigStatus 1.3.6.1.4.1.119.2.3.3.13.110.6.2.1.1
Indicates whether ilmi is currently enabled at this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpAtmCClmiMaxTransmissions 1.3.6.1.4.1.119.2.3.3.13.110.6.2.1.2
In a situation where a request is not receiving a response within mpAtmCCLimiRetransmitInterval, the number of consecutive transmissions/non-responses that will cause the UME to declare a loss of ILMI connectivity This variable is intended to promote interoperability, so no range restriction is given.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCIlmiRetransmitInterval 1.3.6.1.4.1.119.2.3.3.13.110.6.2.1.3
The time in seconds between retransmissions of ILMI requests This variable is intended to promote interoperability, so no range restriction is given.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingTable 1.3.6.1.4.1.119.2.3.3.13.110.6.3
ILMI parameter Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCSignallingEntry

mpAtmCCSignallingEntry 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1
Entry of mpATMCCSignallingTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCSignallingEntry  

mpAtmCCSignallingT301 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.1
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT303 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.2
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT308 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.3
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT309 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.4
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT310 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.5
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT313 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.6
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT316 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.7
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT317 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.8
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT322 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.9
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT331 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.10
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT397 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.11
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT398 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.12
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCSignallingT399 1.3.6.1.4.1.119.2.3.3.13.110.6.3.1.13
Expert variable: timer in seconds
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCProtocolTrapInfoTable 1.3.6.1.4.1.119.2.3.3.13.110.6.4
ATM Protocol Control Trap Infomation tabale
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCProtocolTrapInfoEntry

mpAtmCCProtocolTrapInfoEntry 1.3.6.1.4.1.119.2.3.3.13.110.6.4.1
Entry of mpATMCCProtocolTrapInfoTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCProtocolTrapInfoEntry  

mpAtmCCProtocolTrapInfoIndex 1.3.6.1.4.1.119.2.3.3.13.110.6.4.1.1
The index value at this table
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCProtocolTrapInfoCause 1.3.6.1.4.1.119.2.3.3.13.110.6.4.1.2
Indicates why this trap send
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPathTrace 1.3.6.1.4.1.119.2.3.3.13.110.7
OBJECT IDENTIFIER    

mpAtmCCVccStatusTable 1.3.6.1.4.1.119.2.3.3.13.110.7.1
This table indicate the vcc status infomation at the ATM port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCVccStatusEntry

mpAtmCCVccStatusEntry 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1
Entry of mpAtmCCVccStatusTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCVccStatusEntry  

mpAtmCCVccStatusOrgPort 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.1
Specified PORT number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCVccStatusOrgVpi 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.2
Specified VPI number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCVccStatusOrgVci 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.3
Specified VCI number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCVccStatusDestPort 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.4
Destination PORT number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCVccStatusDestVpi 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.5
Destination VPI number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCVccStatusDestVci 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.6
Destination VCI number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCVccStatusPathKind 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.7
Path classification.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pvc(1), softpvc(2), insPvc(3), pvp(4), softpvp(5)  

mpAtmCCVccStatusOrgCallKind 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.8
Port classification for specified an edge point.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER calling(1), outgoing(2), incoming(3), called(4)  

mpAtmCCVccStatusDestCallKind 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.9
Port classification for destination an edge point.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER calling(1), outgoing(2), incoming(3), called(4)  

mpAtmCCVccStatusAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.10
Control status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCVccStatusOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.11
Connection status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCVccStatusInsStatus 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.12
INS detour indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER trunkPort(1), insPort(2)  

mpAtmCCVccStatusOrgPortVpTunneling 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.13
Original port VP-Tunneling indication. 1:VP-Tunneling 2:Not VP-Tunneling
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

mpAtmCCVccStatusDestPortVpTunneling 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.14
Destination port VP-Tunneling indication. 1:VP-Tunneling 2:Not VP-Tunneling
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

mpAtmCCVccStatusConnCastType 1.3.6.1.4.1.119.2.3.3.13.110.7.1.1.15
The type of topology of a connection (point- to-point, point-to-multipoint).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER p2p(1), p2mpRoot(2), p2mpLeaf(3)  

mpAtmCCPvcTraceControlTable 1.3.6.1.4.1.119.2.3.3.13.110.7.2
This is the table type object of the PVC PathTrace registration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCPvcTraceCtlEntry

mpAtmCCPvcTraceCtlEntry 1.3.6.1.4.1.119.2.3.3.13.110.7.2.1
Entry of mpAtmCCPvcTraceInfoTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCPvcTraceCtlEntry  

mpAtmCCPvcTraceIndex 1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.1
The value of this object identifies the PVC PathTrace collection number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..10  

mpAtmCCPvcTraceCtlPathKind 1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.2
The value of this object identifies the path kind.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER vcc(1), vpc(2)  

mpAtmCCPvcTraceCtlIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.3
The value of this object identifies the interface number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCPvcTraceCtlVpi 1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.4
The value of this object identifies the VPI number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCPvcTraceCtlVci 1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.5
The value of this object identifies the VCI number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCPvcTraceCtlStatus 1.3.6.1.4.1.119.2.3.3.13.110.7.2.1.6
The value of this object identifies the PVC PathTrace condition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), start(2), collecting(3), done(4), cancel(5), unknown(6)  

mpAtmCCPvcTraceInfoTable 1.3.6.1.4.1.119.2.3.3.13.110.7.3
This is the table type object of the PVC PathTrace information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCPvcTraceInfoEntry

mpAtmCCPvcTraceInfoEntry 1.3.6.1.4.1.119.2.3.3.13.110.7.3.1
Entry of mpAtmCCPvcTraceInfoTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCPvcTraceInfoEntry  

mpAtmCCPvcTraceEntryIndex 1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.1
The value of this object identifies the inside index of PVC PathTrace information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..20  

mpAtmCCPvcTraceInfoSysName 1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.2
The value of this object identifies the node name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

mpAtmCCPvcTraceInfoIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.3
The value of this object identifies the interface number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPvcTraceInfoVpi 1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.4
The value of this object identifies the VPI number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPvcTraceInfoVci 1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.5
The value of this object identifies the VCI number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPvcTraceInfoPathKind 1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.6
The value of this object identifies the path kind.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER pvc(1), softpvc(2), inspvc(3), pvp(4), softpvp(5)  

mpAtmCCPvcTraceInfoCallKind 1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.7
The value of this object identifies the connection type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER calling(1), outgoing(2), incoming(3), called(4)  

mpAtmCCPvcTraceInfoLastSegment 1.3.6.1.4.1.119.2.3.3.13.110.7.3.1.8
The value of this object identifies the last segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER notlast(1), last(2)  

mpAtmCCMuxMib 1.3.6.1.4.1.119.2.3.3.13.110.8
OBJECT IDENTIFIER    

mpAtmCCMuxStatistics 1.3.6.1.4.1.119.2.3.3.13.110.8.1
OBJECT IDENTIFIER    

mpAtmCCMuxStatReceiveCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.8.1.1
Counter of MUX receive cells.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCMuxStatReceiveCellsCntOvfCounters 1.3.6.1.4.1.119.2.3.3.13.110.8.1.2
Overflow counter of MUX receive cells counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCMuxStatDiscardCellsBufOvfCounters 1.3.6.1.4.1.119.2.3.3.13.110.8.1.3
Discard cell counter on buffer overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCMuxStatDiscardCellsBufOvfCntOvfCounters 1.3.6.1.4.1.119.2.3.3.13.110.8.1.4
Overflow counter of discard cell counter on buffer overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCMuxStatDiscardCellsHTErrCounters 1.3.6.1.4.1.119.2.3.3.13.110.8.1.5
Discard cell counter on header transration error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCMuxStatDiscardCellsHTErrCntOvfCounters 1.3.6.1.4.1.119.2.3.3.13.110.8.1.6
Overflow counter of discard cell counter on header transration error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCMuxStatDiscardCellsThresholdOvfCounters 1.3.6.1.4.1.119.2.3.3.13.110.8.1.7
Discard cell counter on threshold overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCMuxStatDiscardCellsThresholdOvfCntOvfCounters 1.3.6.1.4.1.119.2.3.3.13.110.8.1.8
Overflow counter of discard cell counter on threshold overflow.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCVpTunneling 1.3.6.1.4.1.119.2.3.3.13.110.9
OBJECT IDENTIFIER    

mpAtmCCVpTunnelingTable 1.3.6.1.4.1.119.2.3.3.13.110.9.1
VP-Tunneling parameter Table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCVpTunnelingEntry

mpAtmCCVpTunnelingEntry 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1
Entry of mpAtmCCVpTunnelingTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCVpTunnelingEntry  

mpAtmCCVpTunnelingVpi 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.1
Specified VPI number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCVpTunnelingAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.2
Control status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCVpTunnelingOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.3
Connection status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCVpTunnelingSpeed 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.4
VP bandwidth(kbps).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCVpTunnelingNeighborInfo 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.5
Neighbor Info(ifIndex).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCVpTunnelingPnniVer 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.6
PNNI Signaling version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCVpTunnelingContinuityCheck 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.7
Continuity Check.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mpAtmCCVpTunnelingTrapState 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.8
Trap State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mpAtmCCVpTunnelingSeverity 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.9
Severity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), warning(4), informational(5)  

mpAtmCCVpTunnelingCfgStatus 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.98
Configuration setting start object. If this object is set the setting of the configuration is started.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), cancel(2), delete(3), unknown(4)  

mpAtmCCVpTunnelingErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.9.1.1.99
Object that the configuration setting result is set up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPathTest 1.3.6.1.4.1.119.2.3.3.13.110.10
OBJECT IDENTIFIER    

mpAtmCCPathTestTable 1.3.6.1.4.1.119.2.3.3.13.110.10.1
This Table is control for the PATH TEST(F5 OAM CELL) function
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCPathTestEntry

mpAtmCCPathTestEntry 1.3.6.1.4.1.119.2.3.3.13.110.10.1.1
Entry of mpAtmCCPathTestTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCPathTestEntry  

mpAtmCCPathTestVpi 1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.1
Index value for the specific VPI
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPathTestVci 1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.2
Index value for the specific VCI
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPathTestStatus 1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.3
The value of this object identifies the desired status of this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER testReq(1), sendStart(2), sendStop(3), loopSet(4), loopRelease(5), delete(6), unknown(7)  

mpAtmCCPathTestSendDirection 1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.4
Indicate the direction which send the F5 OAM cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER port(1), mux(2)  

mpAtmCCPathTestSendTime 1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.5
The amount of time this path will send the F5 OAM cells.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..68400  

mpAtmCCPathTestSendCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.6
A amount of the number of F5 OAM cells sending.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPathTestRcvCellsCounters 1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.7
A aomut of the number of F5 OAN cells received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

mpAtmCCPathTestErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.10.1.1.99
A additonal infomation for the error-response.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPvcGroupCutover 1.3.6.1.4.1.119.2.3.3.13.110.11
OBJECT IDENTIFIER    

mpAtmCCPvcGroupCutoverBaseInfo 1.3.6.1.4.1.119.2.3.3.13.110.11.1
OBJECT IDENTIFIER    

mpAtmCCPvcGroupCutoverEnable 1.3.6.1.4.1.119.2.3.3.13.110.11.1.1
Specifies whether the node is currently operating the PVC-Group-CutOver functions. If the value is 'false', then it can not support the PVC-Group-CutOver service. This attribute reflects the node configration data in the PVC-Group-CutOver Service Request State and functiins condition. It can change only Command Line Interface(CLI). (Node reboot is indispensable chage to the PVC-Group-CutOver Service Request Status )
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ture(1), false(2)  

mpAtmCCPvcGroupCutoverStatus 1.3.6.1.4.1.119.2.3.3.13.110.11.1.2
The current status of PVC-Group-Cutover function status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null(1), underAvtivate(2), underDeactivate(3)  

mpAtmCCUnitePvcGroup 1.3.6.1.4.1.119.2.3.3.13.110.11.2
OBJECT IDENTIFIER    

mpAtmCCUpgcBaseInfo 1.3.6.1.4.1.119.2.3.3.13.110.11.2.1
OBJECT IDENTIFIER    

mpAtmCCUpgcTotalGroupNumber 1.3.6.1.4.1.119.2.3.3.13.110.11.2.1.1
The total number of registerd to Unite Pvc Group in this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCUpgcBaseActiveGroupNumber 1.3.6.1.4.1.119.2.3.3.13.110.11.2.1.2
The number of active Unite Pvc Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCUnitePvcGroupControlTable 1.3.6.1.4.1.119.2.3.3.13.110.11.2.2
This table contains the control of the Unite Pvc Group objects
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCUpgcCtlEntry

mpAtmCCUpgcCtlEntry 1.3.6.1.4.1.119.2.3.3.13.110.11.2.2.1
An entry in the mpAtmCCUpgcCtlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCUpgcCtlEntry  

mpAtmCCUpgcIndex 1.3.6.1.4.1.119.2.3.3.13.110.11.2.2.1.1
The Unite Pvc Group identifier for this node. A value assigned to a node in this node that uniquely identifies in the MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

mpAtmCCUpgcCtlStatus 1.3.6.1.4.1.119.2.3.3.13.110.11.2.2.1.2
This variable indicates the Control Status of this Unite Pvc Group. - 'register', which indicates that request to careate a new instance (Unite PVC Group) in the node. - 'active', which indicates that the Unite Pvc Group is connected. - 'inactive', which indicates that the Unite Pvc Group is disconnected. - 'delete', which indicates that request to delete the Unite Pvc Group. - 'stsInactive', which indicates that request to only the status is change to 'inactive'. This request is not disconnect the connecting PVC's. - 'underEstablish', which indicates that the under the connecting progress in the Unite Pvc Group. - 'underDeactivate', which indicates that the under the disconnecting progress in the Unite Pvc Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER register(1), active(2), inactive(3), delete(4), stsInactive(5), underEstablish(6), underDeactivate(7)  

mpAtmCCUpgcCtlCountPgc 1.3.6.1.4.1.119.2.3.3.13.110.11.2.2.1.3
The total number of registered Pvc Group in the Unite Pvc Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCUpgcCtlResult 1.3.6.1.4.1.119.2.3.3.13.110.11.2.2.1.4
Indicate the result at which process the Unite Pvc Group CutOver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCUnitePvcGroupRegisterTable 1.3.6.1.4.1.119.2.3.3.13.110.11.2.3
This table uesd that register the Pvc Group for the Unite Pvc Group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCUpgcRegiEntry

mpAtmCCUpgcRegiEntry 1.3.6.1.4.1.119.2.3.3.13.110.11.2.3.1
An entry in the mpAtmCCUpgcRegiTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCUpgcRegiEntry  

mpAtmCCUpgcPgcIndex 1.3.6.1.4.1.119.2.3.3.13.110.11.2.3.1.1
The Index value for specified the Pvc Group that to add (or delete) from Unite Pvc Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

mpAtmCCUpgcRegiStatus 1.3.6.1.4.1.119.2.3.3.13.110.11.2.3.1.2
This variable indicates the ragistratoin Status the PVC Groupe to specified the Unite Pvc Group. - 'add', which indicates that add the Pvc group to Unite Pvc Group. - 'delete', which indicates that delete the Pvc group to Unite Pvc Group. - 'enable', which indicates that ragisterd the Pvc group in the Unite Pvc Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER add(1), delete(2), enable(3)  

mpAtmCCPvcGroup 1.3.6.1.4.1.119.2.3.3.13.110.11.3
OBJECT IDENTIFIER    

mpAtmCCPgcBaseInfo 1.3.6.1.4.1.119.2.3.3.13.110.11.3.1
OBJECT IDENTIFIER    

mpAtmCCPgcTotalGroupNumber 1.3.6.1.4.1.119.2.3.3.13.110.11.3.1.1
The total number of registerd to Pvc Group in this node.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPvcGroupControlTable 1.3.6.1.4.1.119.2.3.3.13.110.11.3.2
This table contains the control of the Pvc Group objects
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCPgcCtlEntry

mpAtmCCPgcCtlEntry 1.3.6.1.4.1.119.2.3.3.13.110.11.3.2.1
An entry in the mpAtmCCPgcCtlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCPgcCtlEntry  

mpAtmCCPgcIndex 1.3.6.1.4.1.119.2.3.3.13.110.11.3.2.1.1
The Pvc Group identifier for this node. A value assigned to a node in this node that uniquely identifies in the MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4096  

mpAtmCCPgcCtlStatus 1.3.6.1.4.1.119.2.3.3.13.110.11.3.2.1.2
This variable indicates the Control Status of this Pvc Group. - 'register', which indicates that request to careate a new instance (PVC Group) in the node. - 'active', which indicates that the Pvc Group is connected. - 'inactive', which indicates that the Pvc Group is disconnected. - 'delete', which indicates that request to delete the Pvc Group. - 'stsInactive', which indicates that request to only the status is change to 'inactive'. This request is not disconnect the connecting PVC's. - 'underEstablish', which indicates that the under the connecting progress in the Pvc Group. - 'underDeactivate', which indicates that the under the disconnecting progress in the Pvc Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER register(1), active(2), inactive(3), delete(4), stsInactive(5), underEstablish(6), underDeactivate(7)  

mpAtmCCPgcCtlCountPvc 1.3.6.1.4.1.119.2.3.3.13.110.11.3.2.1.3
The total number of registered Pvc in the Pvc Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPgcCtlResult 1.3.6.1.4.1.119.2.3.3.13.110.11.3.2.1.4
Indicate the result at which process the Pvc Group CutOver.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPvcGroupRegisterTable 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3
This table uesd that register the Pvc for the Pvc Group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCPgcRegiEntry

mpAtmCCPgcRegiEntry 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1
An entry in the mpAtmCCPgcRegiTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCPgcRegiEntry  

mpAtmCCPgcPvcIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.1
The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this pvc in PVC Group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCPgcPvcVpi 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.2
The VPI value of the pvc in PVC Group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCPgcPvcVci 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.3
The VCI value of the pvc in PVC Group. The value of 0 can used with PVP.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCPgcPvcKind 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.4
This object is indicates the kind of pvc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER staticPvc(1), softPvc(2)  

mpAtmCCPgcStaticPvcDestIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.5
The value of this object is equal to MIB II's ifIndex value of the distination ATM interface port. This value is not relevant when the value of mpAtmCCPgcPvcKind is 'softPvc'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCPgcSoftPvcDestAtmAddress 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.6
The distinaniton ATM address of this pvc in the PVC Group. This value is not relevant when the value of mpAtmCCPgcPvcKind is 'staticPvc'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmAddr  

mpAtmCCPgcPvcDestVpi 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.7
The VPI value of the distination pvc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCPgcPvcDestVci 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.8
The VCI value of the distination pvc. When the value of mpAtmCCPgcPvcVci is 0, the value of this object is accept 0 only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCPgcPvcReceiveTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.9
The value of this ofject identifies the row of the ATM Traffic Descriptor Table which applies to the receive direction of this pvc in PVC Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCPgcPvcTransmitTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.10
The value of this ofject identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this pvc in PVC Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCPgcPvcPriority 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.11
The value of this ofject identifies the connect priority of the pvc in the PVC Group
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..3  

mpAtmCCPgcStaticPvcId 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.12
The value of this object identifies the Static-PVC IDENTIFY the pvc in the PVC Group. This value is not relevant when the value of mpAtmCCPgcPvcKind is 'softPvc'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCPgcStaticPvcSeqNo 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.13
The value of this object identifies the Sequence Number of the static-pvc in the PvcGroup. This value is not relevant when the value of mpAtmCCPgcPvcKind is 'softPvc'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCPgcSoftPvcCallKind 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.14
The value of this object identifies the call kind of the soft-pvc in the PvcGroup. This value is not relevant when the value of mpAtmCCPgcPvcKind is 'staticPvc'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER calling(1), called(2)  

mpAtmCCPgcRegiAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.15
The value of this object identifies the desired administrative status of this pvc in the PVC Group. - 'inactive', which indicates that request to disconnect the pvc. - 'active', which indicates that request to connect the pvc. - 'stsInactive', which indicates that request to only a status is change, not disconnect the pvc. - 'connectWait', which indicates that connecting progress at this pvc. - 'disconnectWait', which indicates that disconnecting progress at this pvc.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(1), active(2), stsInactive(3), connectWait(4), disconnectWait(5)  

mpAtmCCPgcRegiCfgStatus 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.16
The value of this object identifies the desired configration status of this pvc in the PVC Group. - 'enable', which indicates that set to the configration - 'cancel', which indicates that request to clear the procedure - 'delete', which indicates that deleted form the configration - 'unkown',
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), cancel(2), delete(3), unknown(4)  

mpAtmCCPgcRegiErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.11.3.3.1.17
The value of this object indicate the result of set request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCPvcGroupActiveInfoTable 1.3.6.1.4.1.119.2.3.3.13.110.11.3.4
Confirm to the PVC Group that status is active.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCPgcActInfoEntry

mpAtmCCPgcActInfoEntry 1.3.6.1.4.1.119.2.3.3.13.110.11.3.4.1
The entry of mpAtmCCPvcGroupActiveInfoTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCPgcActInfoEntry  

mpAtmCCPgcActGrpNum 1.3.6.1.4.1.119.2.3.3.13.110.11.3.4.1.1
The number of the PVC Group that status is active.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMulticast 1.3.6.1.4.1.119.2.3.3.13.110.12
OBJECT IDENTIFIER    

mpAtmCCAtmMulticastRegistration 1.3.6.1.4.1.119.2.3.3.13.110.12.1
OBJECT IDENTIFIER    

mpAtmCCAtmMultiRootIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.12.1.1
The value of this object is equal to MIB II's ifIndex value of the ATM interface port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiRootVpi 1.3.6.1.4.1.119.2.3.3.13.110.12.1.2
The VPI value of the Multicast-Root-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiRootVci 1.3.6.1.4.1.119.2.3.3.13.110.12.1.3
The VCI value of the Multicast-Root-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiLeafIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.12.1.4
The value of this object is equal to MIB II's ifIndex value of the ATM interface port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiLeafVpi 1.3.6.1.4.1.119.2.3.3.13.110.12.1.5
The VPI value of the Multicast-Leaf-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiLeafVci 1.3.6.1.4.1.119.2.3.3.13.110.12.1.6
The VCI value of the Multicast-Leaf-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.12.1.7
The value of this object identifies in the ATM Traffic Descriptor Table which applies to this multicast PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCAtmMultiSlotNumber 1.3.6.1.4.1.119.2.3.3.13.110.12.1.8
Specified the slot number which used the Multicast Card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiVcRdiResponse 1.3.6.1.4.1.119.2.3.3.13.110.12.1.9
Specified responds to the VC-AIS or not when the VC-RDI received.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ture(1), false(2)  

mpAtmCCAtmMultiPvcId 1.3.6.1.4.1.119.2.3.3.13.110.12.1.10
The value of this object identifies the desired this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiSeqNo 1.3.6.1.4.1.119.2.3.3.13.110.12.1.11
Order information in this connection.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiCfgStatus 1.3.6.1.4.1.119.2.3.3.13.110.12.1.98
The value of this object identifies configration status for this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), cancel(2), delete(3), unknown(4)  

mpAtmCCAtmMultiRegErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.12.1.99
The value of this object indicates error information that became an error set to MIB in this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMulticastCtlTable 1.3.6.1.4.1.119.2.3.3.13.110.12.2
This table used when control of the multicast root or leaf PVC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCAtmMultiCtlEntry

mpAtmCCAtmMultiCtlEntry 1.3.6.1.4.1.119.2.3.3.13.110.12.2.1
An entry in the mpAtmCCAtmMulticastCtlTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCAtmMultiCtlEntry  

mpAtmCCAtmMultiIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.1
The value of this object is equal to MIB II's ifIndex value of the ATM interface port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiVpi 1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.2
The VPI value of this PVC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiVci 1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.3
The VCI value of this PVC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.4
The value of this object identifies the desired administrative status of this Multicast-PVC. The up and down states indicate that the traffic flow is enabled and disabled respectively on this Multicast-PVC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCAtmMultiOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.5
The value of this object identifies the desired operational status of this Multicast-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCAtmMultiErrInfo 1.3.6.1.4.1.119.2.3.3.13.110.12.2.1.99
The value of this object indicates error information that became an error set to MIB in this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMulticastConfTable 1.3.6.1.4.1.119.2.3.3.13.110.12.3
This table indicate that infom the ATM-Multicast-PVC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmCCAtmMultiConfEntry

mpAtmCCAtmMultiConfEntry 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1
An entry in the mpAtmCCAtmMulticastConfTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MpAtmCCAtmMultiConfEntry  

mpAtmCCAtmMultiConfRootIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.1
The value of this object is equal to MIB II's ifIndex value of the ATM interface port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiConfRootVpi 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.2
The VPI value of the Multicast-Root-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiConfRootVci 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.3
The VCI value of the Multicast-Root-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiConfLeafIfIndex 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.4
The value of this object is equal to MIB II's ifIndex value of the ATM interface port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiConfLeafVpi 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.5
The VPI value of the Multicast-Leaf-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiConfLeafVci 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.6
The VCI value of the Multicast-Leaf-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiConfRootAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.7
The value of this object identifies the desired administrative status of this Multicast-Root-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCAtmMultiConfRootOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.8
The value of this object identifies the desired operational status of this Multicast-Root-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCAtmMultiConfLeafAdminStatus 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.9
The value of this object identifies the desired administrative status of this Multicast-Leaf-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCAtmMultiConfLeafOperStatus 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.10
The value of this object identifies the desired operational status of this Multicast-Leaf-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmCCAtmMultiConfTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.11
The value of this object identifies in the ATM Traffic Descriptor Table which applies of this Multicast-PVC.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AtmTrafficDescrParamIndex  

mpAtmCCAtmMultiConfSlotNumber 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.12
The value of this object identifies the slot number which used the Multicast Card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiConfVcRdiResponse 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.13
he value of this object identifies that responds to the VC-AIS or not when the VC-RDI received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

mpAtmCCAtmMultiConfPvcId 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.14
The value of this object identifies the desired this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiConfSeqNo 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.15
Order information in this connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiConfShaperRate 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.16
The bandwidth value of this Multicast-PVC in cell per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

mpAtmCCAtmMultiConfRootVpTunneling 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.17
The value of this object identifies the port (at the Multicast-Root-PVC) VP-Tunneling indication. 1:VP-Tunneling 2:Not VP-Tunneling
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ture(1), false(2)  

mpAtmCCAtmMultiConfLeafVpTunneling 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.18
The value of this object identifies the port (at the Multicast-Leaf-PVC) VP-Tunneling indication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ture(1), false(2)  

mpAtmCCAtmMultiConfNextLeaf 1.3.6.1.4.1.119.2.3.3.13.110.12.3.1.19
The value of this object identifies the last segment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ture(1), false(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor