MPLS-MLDP-STD-MIB

File: MPLS-MLDP-STD-MIB.mib (34268 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB MPLS-TC-STD-MIB MPLS-LSR-STD-MIB
DIFFSERV-MIB INET-ADDRESS-MIB MPLS-LDP-STD-MIB
JUNIPER-EXPERIMENT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Counter32 Counter64
TimeTicks MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP TruthValue RowStatus
StorageType TimeStamp InterfaceIndex
mplsStdMIB MplsLdpIdentifier MplsIndexType
IndexInteger IndexIntegerNextFree InetAddress
InetAddressType mplsLdpStdMIB mplsLdpEntityLdpId
mplsLdpEntityIndex mplsLdpPeerLdpId mplsLdpSessionStatsEntry
jnxMldpExperiment

Defined Types

MplsLdpPeerCapabilityEntry  
SEQUENCE    
  mplsMldpPeerLdpId MplsLdpIdentifier
  mplsLdpPeerCapability BITS

MplsMldpSessionStatsEntry  
SEQUENCE    
  mplsMldpSessionStatsNumFecsSent Counter32
  mplsMldpSessionStatsNumMbbReqSentState Counter32
  mplsMldpSessionStatsNumFecsRcvd Counter32
  mplsMldpSessionStatsNumMbbReqRcvdState Counter32
  mplsMldpSessionStatsNumMbbResetAckByTimer Counter32

MplsMldpFecEntry  
SEQUENCE    
  mplsMldpFecIndex IndexInteger
  mplsMldpFecType INTEGER
  mplsMldpFecRootAddrType InetAddressType
  mplsMldpFecRootAddr InetAddress
  mplsMldpFecOpaqueType INTEGER
  mplsMldpFecOpaqueGenLspId Unsigned32
  mplsMldpFecOpaqueTransitSourceOrBidirAddrType InetAddressType
  mplsMldpFecOpaqueTransitSourceOrBidirAddr InetAddress
  mplsMldpFecOpaqueTransitGroupAddrType InetAddressType
  mplsMldpFecOpaqueTransitGroupAddr InetAddress
  mplsMldpFecAdminStatus INTEGER
  mplsMldpFecOperStatus INTEGER
  mplsMldpFecMoFrr INTEGER
  mplsMldpFecLsrState INTEGER
  mplsMldpFecUpTime TimeStamp

MplsMldpFecBranchStatsEntry  
SEQUENCE    
  mplsMldpFecBranchFecIndex MplsIndexType
  mplsMldpFecBranchOutSegIndex MplsIndexType
  mplsMldpFecBranchPeerLdpId MplsLdpIdentifier
  mplsMldpFecBranchStatsPackets Counter64
  mplsMldpFecBranchStatsBytes Counter64
  mplsMldpFecBranchStatsDiscontinuityTime TimeStamp

MplsMldpFecUpstreamSessEntry  
SEQUENCE    
  mplsMldpFecUpstreamSessFecIndex MplsIndexType
  mplsMldpFecUpstreamSessInSegIndex MplsIndexType
  mplsMldpFecUpstreamSessPeerLdpId MplsLdpIdentifier
  mplsMldpFecUpstreamSessPrimary INTEGER
  mplsMldpFecUpstreamSessActive INTEGER

Defined Values

mplsMldpStdMIB 1.3.6.1.4.1.2636.5.13.1
Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Please review these documents carefully, as they describe your rights and restrictions with respect to this document. The initial version of this MIB module was published in RFC XXXX. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html -- RFC Editor. Please replace XXXX with the RFC number for this -- document and remove this note. This MIB module contains managed object definitions for mLDP LSPS defined in Label Distribution Protocol Extensions Point-to-Multipoint and Multipoint-to-Multipoint Label Switched Paths, RFC 6388, November 2011.
MODULE-IDENTITY    

mplsMldpNotifications 1.3.6.1.4.1.2636.5.13.1.0
OBJECT IDENTIFIER    

mplsMldpScalars 1.3.6.1.4.1.2636.5.13.1.1
OBJECT IDENTIFIER    

mplsMldpObjects 1.3.6.1.4.1.2636.5.13.1.2
OBJECT IDENTIFIER    

mplsMldpP2mpCapable 1.3.6.1.4.1.2636.5.13.1.1.1
This object provides the P2MP capability of the LSR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mplsMldpMp2mpCapable 1.3.6.1.4.1.2636.5.13.1.1.2
This object provides MP2MP capability of the LSR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mplsMldpMbbCapable 1.3.6.1.4.1.2636.5.13.1.1.3
This object provides MBB (make before break) capability of the LSR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mplsMldpMbbTime 1.3.6.1.4.1.2636.5.13.1.1.4
The 32-bit unsigned integer value provides the time for waiting MBB Ack from upstream node.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..300  

mplsMldpNumFecs 1.3.6.1.4.1.2636.5.13.1.1.5
The number of active and passive mLdp Fecs on this device.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mplsMldpNumFecsActive 1.3.6.1.4.1.2636.5.13.1.1.6
The number of mLdp FECs Active on this device. The mLDP FEC is considered active if the mplsMldpFecOperStatus is up(1).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mplsMldpPlrCapable 1.3.6.1.4.1.2636.5.13.1.1.7
This object provides Point of Local Repair (PLR) capability of the LSR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mplsMldpMptCapable 1.3.6.1.4.1.2636.5.13.1.1.8
This object provides Merge Point (MPT) capability of the LSR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mplsMldpProtLsrCapable 1.3.6.1.4.1.2636.5.13.1.1.9
This object provides Protected LSR capability.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mplsMldpNodeProtCapable 1.3.6.1.4.1.2636.5.13.1.1.10
This object provides Node Protection capability of the LSR.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mplsLdpPeerCapabilityTable 1.3.6.1.4.1.2636.5.13.1.2.1
This table will have learned information relating to Mldp.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MplsLdpPeerCapabilityEntry

mplsLdpPeerCapabilityEntry 1.3.6.1.4.1.2636.5.13.1.2.1.1
Information about a single Peer which is related to a Session. This table is augmented by the mplsLdpSessionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MplsLdpPeerCapabilityEntry  

mplsMldpPeerLdpId 1.3.6.1.4.1.2636.5.13.1.2.1.1.1
The LDP identifier of this LDP Peer.
Status: current Access: read-only
OBJECT-TYPE    
  MplsLdpIdentifier  

mplsLdpPeerCapability 1.3.6.1.4.1.2636.5.13.1.2.1.1.2
This will indicate the LDP capability information about peer. The p2mp indicates peer supports P2MP Capability. The mp2mp indicates peer supports MP2MP Capability. The mbb indicates peer supports MBB Capability. The upstream-label-assignment indicates peer supports Upstream label assignment Capability. The dynamic indicates peer supports dynamic Capability. The plr indicates Point of Local Repair Capability. The mpt indicates Point of Merge Point Capability. The prot-lsr indicates Protected LSR Capability. The node-prot indicates Node Protection LSR Capability.
Status: current Access: read-only
OBJECT-TYPE    
  BITS none(0), p2mp(1), mp2mp(2), mbb(3), upstream-label-assignment(4), dynamic(5), plr(6), mpt(7), prot-lsr(8), node-prot(9)  

mplsMldpSessionStatsTable 1.3.6.1.4.1.2636.5.13.1.2.2
A table of statistics related to mLDP on Sessions. This table AUGMENTS the mplsLdpSessionStatsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MplsMldpSessionStatsEntry

mplsMldpSessionStatsEntry 1.3.6.1.4.1.2636.5.13.1.2.2.1
An entry in this table represents mLDP statistical information on a single session between an LDP Entity and LDP Peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  MplsMldpSessionStatsEntry  

mplsMldpSessionStatsNumFecsSent 1.3.6.1.4.1.2636.5.13.1.2.2.1.1
This object counts the number of mLDP FECs sent on this session. If the FEC is withdrawn, then this number is decremented. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of mplsLdpSessionDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mplsMldpSessionStatsNumMbbReqSentState 1.3.6.1.4.1.2636.5.13.1.2.2.1.2
This object counts the number of mLDP FECs sent on this session and waiting for MBB Ack. This counter will get incremented when MBB req sent for a label on this session and will get decremented when the MBB Ack received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mplsMldpSessionStatsNumFecsRcvd 1.3.6.1.4.1.2636.5.13.1.2.2.1.3
This object counts the number of mLDP FECs received on this session. If the FEC is withdrawn from the downstream session, then this is decremented. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of mplsLdpSessionDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mplsMldpSessionStatsNumMbbReqRcvdState 1.3.6.1.4.1.2636.5.13.1.2.2.1.4
This object counts the number of mLDP FECs received on this session and waiting for sending MBB Ack. This counter will get incremented when MBB req is received for a label on this session and will get decremented when the MBB Ack sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mplsMldpSessionStatsNumMbbResetAckByTimer 1.3.6.1.4.1.2636.5.13.1.2.2.1.5
This object counts the number mLDP FECs for which the MBB Ack is reset by MBB timer, in which the LSR is waiting for MBB ack.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mplsMldpFecTable 1.3.6.1.4.1.2636.5.13.1.2.3
This table represents the FEC (Forwarding Equivalence Class) Information associated with an mLDP LSP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MplsMldpFecEntry

mplsMldpFecEntry 1.3.6.1.4.1.2636.5.13.1.2.3.1
Each row represents a single mLDP FEC Element.
Status: current Access: not-accessible
OBJECT-TYPE    
  MplsMldpFecEntry  

mplsMldpFecIndex 1.3.6.1.4.1.2636.5.13.1.2.3.1.1
The index which uniquely identifies this entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  IndexInteger  

mplsMldpFecType 1.3.6.1.4.1.2636.5.13.1.2.3.1.2
The type of the FEC. If the value of this object is 6, then it is P2MP Fec Type, and 7, 8 are correspond to MP2MP upstream and downstream type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER p2mp(6), mp2mpUpstream(7), mp2mpDownstream(8)  

mplsMldpFecRootAddrType 1.3.6.1.4.1.2636.5.13.1.2.3.1.3
The value of this object is the type of the Internet address. The value of this object, decides how the value of the mplsMldpFecRootAddr object is interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

mplsMldpFecRootAddr 1.3.6.1.4.1.2636.5.13.1.2.3.1.4
The value of this object is interpreted based on the value of the mplsMldpFecRootAddrType object. This is ingress node address for the mLDP LSP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

mplsMldpFecOpaqueType 1.3.6.1.4.1.2636.5.13.1.2.3.1.5
This is opaque type of the mLDP FEC. The value of this object is shown below. 1 - The Generic LSP Identifier 3 - Transit IPv4 Source TLV 4 - Transit IPv6 Source TLV 5 - Transit IPv4 Bidir TLV 6 - Transit IPv6 Bidir TLV.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER genericLspId(1), transitIpv4Source(3), transitIpv6Source(4), transitIpv4Bidir(5), transitIpv6Bidir(6)  

mplsMldpFecOpaqueGenLspId 1.3.6.1.4.1.2636.5.13.1.2.3.1.6
The 32-bit unsigned integer value which is to represent Generic LSP ID. This value is only valid if the mplsMldpFecOpaqueType is genericLspId(1), otherwise 0 must be returned.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

mplsMldpFecOpaqueTransitSourceOrBidirAddrType 1.3.6.1.4.1.2636.5.13.1.2.3.1.7
The value of this object is the type of the Internet address. The value of this object, decides how the value of the mplsMldpFecOpaqueTransitSourceOrBidirAddr object is interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

mplsMldpFecOpaqueTransitSourceOrBidirAddr 1.3.6.1.4.1.2636.5.13.1.2.3.1.8
The value of this object is interpreted based on the value of the mplsMldpFecOpaqueTransitSourceOrBidirAddrType object. This is source node address for the mLDP inband LSP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

mplsMldpFecOpaqueTransitGroupAddrType 1.3.6.1.4.1.2636.5.13.1.2.3.1.9
The value of this object is the type of the Internet address. The value of this object, decides how the value of the mplsMldpFecOpaqueTransitGroupAddr object is interpreted.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

mplsMldpFecOpaqueTransitGroupAddr 1.3.6.1.4.1.2636.5.13.1.2.3.1.10
The value of this object is interpreted based on the value of the mplsMldpFecOpaqueTransitGroupAddrType object. This is group node address for the mLDP inband LSP.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

mplsMldpFecAdminStatus 1.3.6.1.4.1.2636.5.13.1.2.3.1.11
Indicates the admin status of this mLDP FEC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mplsMldpFecOperStatus 1.3.6.1.4.1.2636.5.13.1.2.3.1.12
Indicates the actual operational status of this mLDP Fec.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mplsMldpFecMoFrr 1.3.6.1.4.1.2636.5.13.1.2.3.1.13
This object provides whether MoFRR enabled for this mLDP FEC. on this mLDP FEC. As mentioned in the section 3.2 of [I-D.ietf-rtgwg-mofrr], When this is enabled, then mLDP may select two upstream sessions, one is primary and other one is backup. The backup traffic is discarded when the primary upstream session is UP. When the primary upstream session goes down, the traffic from the backup upstream session will be forwarded to downstream.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mplsMldpFecLsrState 1.3.6.1.4.1.2636.5.13.1.2.3.1.14
Indicates the role of FEC either egress, bud, transit or ingress
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER egress(1), bud(2), transit(3), ingress(4)  

mplsMldpFecUpTime 1.3.6.1.4.1.2636.5.13.1.2.3.1.15
This values shows Fec UP time. This is time since mplsMldpFecOperStatus is UP.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

mplsMldpFecBranchStatsTable 1.3.6.1.4.1.2636.5.13.1.2.4
This table provides mLDP Fec branch MPLS Traffic Stats information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MplsMldpFecBranchStatsEntry

mplsMldpFecBranchStatsEntry 1.3.6.1.4.1.2636.5.13.1.2.4.1
An entry in this table is created by the LSR for each downstream branch (out-segment) from this LSR for this mLDP LSP. Each downstream session may represent a single out-segment. Each entry in the table is indexed by the four identifiers of the mLDP LSP, and the out-segment that identifies the outgoing branch.
Status: current Access: not-accessible
OBJECT-TYPE    
  MplsMldpFecBranchStatsEntry  

mplsMldpFecBranchFecIndex 1.3.6.1.4.1.2636.5.13.1.2.4.1.1
This index identifies the mLDP FEC entry in the mplsMldpFecTable. This is same as mplsMldpFecIndex.
Status: current Access: not-accessible
OBJECT-TYPE    
  MplsIndexType  

mplsMldpFecBranchOutSegIndex 1.3.6.1.4.1.2636.5.13.1.2.4.1.2
This object identifies an outgoing branch from this mLDP LSP Its value is unique within the context of the mLDP LSP. This contains the same value as the mplsOutSegmentIndex in the MPLS-LSR-STD-MIBs mplsOutSegmentTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MplsIndexType  

mplsMldpFecBranchPeerLdpId 1.3.6.1.4.1.2636.5.13.1.2.4.1.3
This object identifies an outgoing branch peer LDP ID for this mLDP LSP. Its value is unique within the context of the mLDP LSP. On Egress node, this value could be 0.0.0.0:00 as there will no downstream LDP session.
Status: current Access: read-only
OBJECT-TYPE    
  MplsLdpIdentifier  

mplsMldpFecBranchStatsPackets 1.3.6.1.4.1.2636.5.13.1.2.4.1.4
This object represent the 64-bit value, which gives the number of packets forwarded by the mLDP LSP onto this branch. This object should be read in conjunction with mplsMldpFecBranchStatsDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mplsMldpFecBranchStatsBytes 1.3.6.1.4.1.2636.5.13.1.2.4.1.5
This object represent the 64-bit value, which gives the number of bytes forwarded by the mLDP LSP onto this branch. This object should be read in conjunction with mplsMldpFecBranchStatsDiscontinuityTime.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

mplsMldpFecBranchStatsDiscontinuityTime 1.3.6.1.4.1.2636.5.13.1.2.4.1.6
The value of sysUpTime on the most recent occasion at which any one or more of this rows Counter32 or Counter64 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

mplsMldpFecUpstreamSessTable 1.3.6.1.4.1.2636.5.13.1.2.5
This table provides mLDP Fec upstream Session information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MplsMldpFecUpstreamSessEntry

mplsMldpFecUpstreamSessEntry 1.3.6.1.4.1.2636.5.13.1.2.5.1
An entry in this table is created by the LSR for each upstream session (in-segment) from this LSR for this mLDP LSP. Each upstream session may represent a single in-segment. Each entry in the table is indexed by the four identifiers of the mLDP LSP, and the in-segment that identifies the incoming traffic.
Status: current Access: not-accessible
OBJECT-TYPE    
  MplsMldpFecUpstreamSessEntry  

mplsMldpFecUpstreamSessFecIndex 1.3.6.1.4.1.2636.5.13.1.2.5.1.1
This index identifies the mLDP FEC entry in the mplsMldpFecTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MplsIndexType  

mplsMldpFecUpstreamSessInSegIndex 1.3.6.1.4.1.2636.5.13.1.2.5.1.2
This object identifies an upstream session from this mLDP LSP Its value is unique within the context of the mLDP LSP. This contains the same value as the mplsInSegmentIndex in the MPLS-LSR-STD-MIBs mplsInSegmentTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MplsIndexType  

mplsMldpFecUpstreamSessPeerLdpId 1.3.6.1.4.1.2636.5.13.1.2.5.1.3
This object identifies an upstream session peer LDP ID for this mLDP LSP. Its value is unique within the context of the mLDP LSP.
Status: current Access: read-only
OBJECT-TYPE    
  MplsLdpIdentifier  

mplsMldpFecUpstreamSessPrimary 1.3.6.1.4.1.2636.5.13.1.2.5.1.4
This indicated wether the received traffic from upstream is primary or backup. This is valid only if the MoFRR (mplsMldpFecMoFrr) is enabled on this FEC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), backup(2)  

mplsMldpFecUpstreamSessActive 1.3.6.1.4.1.2636.5.13.1.2.5.1.5
This indicates whether the upstream session is active, means the LSR programmed the forwarding engine to receive the traffic from this upstream session. This will be Inactive if the LSR is wating for MBB Ack.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

mplsMldpFecUp 1.3.6.1.4.1.2636.5.13.1.0.1
This notification is generated when a mplsMldpFecOperStatus object changes from down to up.
Status: current Access: read-only
NOTIFICATION-TYPE    

mplsMldpFecDown 1.3.6.1.4.1.2636.5.13.1.0.2
This notification is generated when a mplsMldpFecOperStatus object changes from up to down.
Status: current Access: read-only
NOTIFICATION-TYPE    

mplsMldpMoFrrStatusChange 1.3.6.1.4.1.2636.5.13.1.0.3
This notification is generated when a mplsMldpFecUpstreamSessPrimary object changes from primary to backup and vice versa.
Status: current Access: read-only
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor