MRV-IN-REACH-PPP-MIB
File:
MRV-IN-REACH-PPP-MIB.mib (48207 bytes)
Imported modules
Imported symbols
Defined Types
XPppConfigEntry |
|
SEQUENCE |
|
|
|
|
xPppConfigOpen |
INTEGER |
|
|
xPppConfigActive |
INTEGER |
|
|
xPppConfigDefaults |
INTEGER |
|
|
xPppConfigRestartTimer |
INTEGER |
|
|
xPppConfigConfLimit |
INTEGER |
|
|
xPppConfigFailLimit |
INTEGER |
|
|
xPppConfigPacketLogging |
INTEGER |
|
|
xPppConfigKATimer |
INTEGER |
|
|
xPppConfigKATimeout |
INTEGER |
|
XPppStatusEntry |
|
SEQUENCE |
|
|
|
|
xPppStatusState |
INTEGER |
|
|
xPppLinkOpen |
INTEGER |
|
|
xPppHdlcRxTotalPkts |
Counter |
|
|
xPppHdlcTxTotalPkts |
Counter |
|
|
xPppHdlcRxFrameErrs |
Counter |
|
|
xPppHdlcRxNoBuffer |
Counter |
|
|
xPppHdlcTxNoBuffer |
Counter |
|
|
xPppHdlcRxBadFcs |
Counter |
|
|
xPppHdlcVJDiscards |
Counter |
|
XPppLcpConfigEntry |
|
SEQUENCE |
|
|
|
|
xPppLcpConfigAuth |
INTEGER |
|
|
xPppLcpConfigChapAuth |
INTEGER |
|
XPppLcpStatusEntry |
|
SEQUENCE |
|
|
|
|
xPppLcpStatusState |
INTEGER |
|
|
xPppLcpStatusRxAuth |
INTEGER |
|
|
xPppLcpStatusTxAuth |
INTEGER |
|
|
xPppLcpStatusRxConReq |
Counter |
|
|
xPppLcpStatusTxConReq |
Counter |
|
|
xPppLcpStatusRxConNak |
Counter |
|
|
xPppLcpStatusTxConNak |
Counter |
|
|
xPppLcpStatusRxConAck |
Counter |
|
|
xPppLcpStatusTxConAck |
Counter |
|
|
xPppLcpStatusRxConRej |
Counter |
|
|
xPppLcpStatusTxConRej |
Counter |
|
|
xPppLcpStatusRxTrmReq |
Counter |
|
|
xPppLcpStatusTxTrmReq |
Counter |
|
|
xPppLcpStatusRxTrmAck |
Counter |
|
|
xPppLcpStatusTxTrmAck |
Counter |
|
|
xPppLcpStatusRxEcoReq |
Counter |
|
|
xPppLcpStatusTxEcoReq |
Counter |
|
|
xPppLcpStatusRxEcoRep |
Counter |
|
|
xPppLcpStatusTxEcoRep |
Counter |
|
|
xPppLcpStatusRxCodRej |
Counter |
|
|
xPppLcpStatusTxCodRej |
Counter |
|
|
xPppLcpStatusRxProRej |
Counter |
|
|
xPppLcpStatusTxProRej |
Counter |
|
|
xPppLcpStatusState2 |
INTEGER |
|
XPppIpcpConfigEntry |
|
SEQUENCE |
|
|
|
|
xPppIpcpConfigLocalAddress |
IpAddress |
|
|
xPppIpcpConfigRemoteAddress |
IpAddress |
|
|
xPppIpcpConfigVJCompSlots |
INTEGER |
|
|
xPppIpcpConfigRangeStart |
IpAddress |
|
|
xPppIpcpConfigRangeEnd |
IpAddress |
|
|
xPppIpcpConfigState |
INTEGER |
|
|
xPppIpcpConfigLocalRangeStart |
IpAddress |
|
|
xPppIpcpConfigLocalRangeEnd |
IpAddress |
|
|
xPppIpcpConfigPppIpMask |
IpAddress |
|
XPppIpcpAsyncConfigEntry |
|
SEQUENCE |
|
|
|
|
xPppIpcpAsyncConfigBrdcast |
INTEGER |
|
XPppIpcpStatusEntry |
|
SEQUENCE |
|
|
|
|
xPppIpcpStatusState |
INTEGER |
|
|
xPppIpcpStatusLocalAddress |
IpAddress |
|
|
xPppIpcpStatusRemoteAddress |
IpAddress |
|
|
xPppIpcpRxConReq |
Counter |
|
|
xPppIpcpTxConReq |
Counter |
|
|
xPppIpcpRxConNak |
Counter |
|
|
xPppIpcpTxConNak |
Counter |
|
|
xPppIpcpRxConAck |
Counter |
|
|
xPppIpcpTxConAck |
Counter |
|
|
xPppIpcpRxConRej |
Counter |
|
|
xPppIpcpTxConRej |
Counter |
|
|
xPppIpcpRxTrmReq |
Counter |
|
|
xPppIpcpTxTrmReq |
Counter |
|
|
xPppIpcpRxTrmAck |
Counter |
|
|
xPppIpcpTxTrmAck |
Counter |
|
|
xPppIpcpRxPkts |
Counter |
|
|
xPppIpcpTxPkts |
Counter |
|
|
xPppIpcpStatusState2 |
INTEGER |
|
XPppAuthConfigEntry |
|
SEQUENCE |
|
|
|
|
xPppAuthChapChallengeTimer |
INTEGER |
|
|
xPppAuthPapConfigState |
INTEGER |
|
|
xPppAuthChapConfigState |
INTEGER |
|
XPppAuthStatusEntry |
|
SEQUENCE |
|
|
|
|
xPppPapStatusState |
INTEGER |
|
|
xPppChapStatusState |
INTEGER |
|
XPppIpxcpConfigEntry |
|
SEQUENCE |
|
|
|
|
xPppIpxcpCipxCompression |
INTEGER |
|
|
xPppIpxcpConfigRemoteNode |
OCTET STRING |
|
XPppIpxcpStatusEntry |
|
SEQUENCE |
|
|
|
|
xPppIpxcpStatusState |
INTEGER |
|
|
xPppIpxcpCipxInCompression |
INTEGER |
|
|
xPppIpxcpCipxOutCompression |
INTEGER |
|
|
xPppIpxcpCipxInSlots |
INTEGER |
|
|
xPppIpxcpCipxOutSlots |
INTEGER |
|
|
xPppIpxcpStatusRemoteNode |
OCTET STRING |
|
XPppIpxcpCountersEntry |
|
SEQUENCE |
|
|
|
|
xPppIpxcpRxConReq |
Counter |
|
|
xPppIpxcpTxConReq |
Counter |
|
|
xPppIpxcpRxConNak |
Counter |
|
|
xPppIpxcpTxConNak |
Counter |
|
|
xPppIpxcpRxConAck |
Counter |
|
|
xPppIpxcpTxConAck |
Counter |
|
|
xPppIpxcpRxConRej |
Counter |
|
|
xPppIpxcpTxConRej |
Counter |
|
|
xPppIpxcpRxTrmReq |
Counter |
|
|
xPppIpxcpTxTrmReq |
Counter |
|
|
xPppIpxcpRxTrmAck |
Counter |
|
|
xPppIpxcpTxTrmAck |
Counter |
|
Defined Values
xPpp |
1.3.6.1.4.1.33.22 |
OBJECT IDENTIFIER |
|
|
|
xPppBasic |
1.3.6.1.4.1.33.22.1 |
OBJECT IDENTIFIER |
|
|
|
xPppLcp |
1.3.6.1.4.1.33.22.2 |
OBJECT IDENTIFIER |
|
|
|
xPppIpcp |
1.3.6.1.4.1.33.22.3 |
OBJECT IDENTIFIER |
|
|
|
xPppAuth |
1.3.6.1.4.1.33.22.4 |
OBJECT IDENTIFIER |
|
|
|
xPppIpxcp |
1.3.6.1.4.1.33.22.5 |
OBJECT IDENTIFIER |
|
|
|
xPppConfigTable |
1.3.6.1.4.1.33.22.1.1 |
A table containing PPP specific variables for this
PPP implementation. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
XPppConfigEntry |
|
xPppConfigEntry |
1.3.6.1.4.1.33.22.1.1.1 |
Management information about a particular PPP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppConfigEntry |
|
|
xPppConfigOpen |
1.3.6.1.4.1.33.22.1.1.1.1 |
Determines if PPP is configured on this port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
xPppConfigActive |
1.3.6.1.4.1.33.22.1.1.1.2 |
Determines if LCP will actively open or wait
passively. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), passive(2) |
|
xPppConfigDefaults |
1.3.6.1.4.1.33.22.1.1.1.3 |
Revert to factory default PPP parameters. In
response to a get-request or get-next-request, the
agent always returns 'ready' for this value.
Setting the value to 'ready' has no effect. Setting
it to 'execute' sets PPP parameters to factory
defaults. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ready(1), execute(2) |
|
xPppConfigRestartTimer |
1.3.6.1.4.1.33.22.1.1.1.4 |
The number of seconds waited before retransmitting
during option negotiation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..10 |
|
xPppConfigConfLimit |
1.3.6.1.4.1.33.22.1.1.1.5 |
Maximum number of times a configuration request
will be sent to the peer without receiving a
response. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
2..10 |
|
xPppConfigFailLimit |
1.3.6.1.4.1.33.22.1.1.1.6 |
Maximum number of times a peer's proposed option
will be NAKed before REJECTing the option. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
2..10 |
|
xPppConfigPacketLogging |
1.3.6.1.4.1.33.22.1.1.1.7 |
Determines the level of packet logging to accounting on this port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), raw(2), interpreted(3) |
|
xPppConfigKATimer |
1.3.6.1.4.1.33.22.1.1.1.8 |
Determines the number of seconds between transmission of LCP Echo
Keepalive packets. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
xPppConfigKATimeout |
1.3.6.1.4.1.33.22.1.1.1.9 |
Determines the number of seconds to wait to hear LCP Echo Replies
to our Echo Request Keepalive packets before giving up and shutting
down the link. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
xPppStatusTable |
1.3.6.1.4.1.33.22.1.2 |
A table containing basic PPP status info. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
XPppStatusEntry |
|
xPppStatusEntry |
1.3.6.1.4.1.33.22.1.2.1 |
Status information about a particular PPP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppStatusEntry |
|
|
xPppStatusState |
1.3.6.1.4.1.33.22.1.2.1.1 |
Displays whether PPP is enabled or disabled on this
port. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
xPppLinkOpen |
1.3.6.1.4.1.33.22.1.2.1.2 |
Displays open status of the link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notOpen(1), open(2) |
|
xPppHdlcRxTotalPkts |
1.3.6.1.4.1.33.22.1.2.1.3 |
Total of all packets received on PPP link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppHdlcTxTotalPkts |
1.3.6.1.4.1.33.22.1.2.1.4 |
Total of all packets transmitted on PPP link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppHdlcRxFrameErrs |
1.3.6.1.4.1.33.22.1.2.1.5 |
Number of framing errors received on PPP link. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppHdlcRxNoBuffer |
1.3.6.1.4.1.33.22.1.2.1.6 |
Number of times a buffer was not available to
receive packet into. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppHdlcTxNoBuffer |
1.3.6.1.4.1.33.22.1.2.1.7 |
Number of times a buffer was not available to
transmit a packet from. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppHdlcRxBadFcs |
1.3.6.1.4.1.33.22.1.2.1.8 |
Number of packets received with a bad checksum. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppHdlcVJDiscards |
1.3.6.1.4.1.33.22.1.2.1.9 |
Number of packets received that failed VJ
decompression. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpConfigTable |
1.3.6.1.4.1.33.22.2.1 |
A table containing PPP LCP specific variables for
this PPP implementation. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
XPppLcpConfigEntry |
|
xPppLcpConfigEntry |
1.3.6.1.4.1.33.22.2.1.1 |
Management information about a particular PPP LCP
session. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppLcpConfigEntry |
|
|
xPppLcpConfigAuth |
1.3.6.1.4.1.33.22.2.1.1.1 |
Authentication protocol used for authenticating
peers. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), pap(2) |
|
xPppLcpConfigChapAuth |
1.3.6.1.4.1.33.22.2.1.1.2 |
Authentication CHAP protocol used for authenticating
peers. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), chap(2) |
|
xPppLcpStatusEntry |
1.3.6.1.4.1.33.22.2.2.1 |
Status information about a particular PPP LCP
session. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppLcpStatusEntry |
|
|
xPppLcpStatusState |
1.3.6.1.4.1.33.22.2.2.1.1 |
The current state of LCP. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
closed(1), listen(2), requestSent(3), ackReceived(4), ackSent(5), open(6), closing(7) |
|
xPppLcpStatusRxAuth |
1.3.6.1.4.1.33.22.2.2.1.2 |
The authentication protocol currently in use from
the peer to us. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), pap(2) |
|
xPppLcpStatusTxAuth |
1.3.6.1.4.1.33.22.2.2.1.3 |
The authentication protocol currently in use from
us to the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), pap(2) |
|
xPppLcpStatusRxConReq |
1.3.6.1.4.1.33.22.2.2.1.4 |
The count of LCP Configure Requests received from
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusTxConReq |
1.3.6.1.4.1.33.22.2.2.1.5 |
The count of LCP Configure Requests transmitted to
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusRxConNak |
1.3.6.1.4.1.33.22.2.2.1.6 |
The count of LCP Configure Naks received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusTxConNak |
1.3.6.1.4.1.33.22.2.2.1.7 |
The count of LCP Configure Naks transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusRxConAck |
1.3.6.1.4.1.33.22.2.2.1.8 |
The count of LCP Configure Acks received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusTxConAck |
1.3.6.1.4.1.33.22.2.2.1.9 |
The count of LCP Configure Acks transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusRxConRej |
1.3.6.1.4.1.33.22.2.2.1.10 |
The count of LCP Configure Rejects received from
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusTxConRej |
1.3.6.1.4.1.33.22.2.2.1.11 |
The count of LCP Configure Rejects transmitted to
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusRxTrmReq |
1.3.6.1.4.1.33.22.2.2.1.12 |
The count of LCP Terminate Requests received from
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusTxTrmReq |
1.3.6.1.4.1.33.22.2.2.1.13 |
The count of LCP Terminate Requests transmitted to
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusRxTrmAck |
1.3.6.1.4.1.33.22.2.2.1.14 |
The count of LCP Terminate Acks received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusTxTrmAck |
1.3.6.1.4.1.33.22.2.2.1.15 |
The count of LCP Terminate Acks transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusRxEcoReq |
1.3.6.1.4.1.33.22.2.2.1.16 |
The count of LCP Echo Requests received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusTxEcoReq |
1.3.6.1.4.1.33.22.2.2.1.17 |
The count of LCP Echo Requests transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusRxEcoRep |
1.3.6.1.4.1.33.22.2.2.1.18 |
The count of LCP Echo Reply received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusTxEcoRep |
1.3.6.1.4.1.33.22.2.2.1.19 |
The count of LCP Echo Reply transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusRxCodRej |
1.3.6.1.4.1.33.22.2.2.1.20 |
The count of LCP Code Rejects received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusTxCodRej |
1.3.6.1.4.1.33.22.2.2.1.21 |
The count of LCP Code Rejects transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusRxProRej |
1.3.6.1.4.1.33.22.2.2.1.22 |
The count of LCP Protocol Rejects received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusTxProRej |
1.3.6.1.4.1.33.22.2.2.1.23 |
The count of LCP Protocol Rejects transmitted to
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppLcpStatusState2 |
1.3.6.1.4.1.33.22.2.2.1.24 |
The current state of LCP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
initial(1), starting(2), closed(3), stopped(4), closing(5), stopping(6), reqSent(7), ackRcvd(8), ackSent(9), opened(10) |
|
xPppIpcpConfigTable |
1.3.6.1.4.1.33.22.3.1 |
A table containing PPP IPCPspecific variables for
this PPP implementation. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
XPppIpcpConfigEntry |
|
xPppIpcpConfigEntry |
1.3.6.1.4.1.33.22.3.1.1 |
Management information about a particular PPP IPCP
session. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppIpcpConfigEntry |
|
|
xPppIpcpConfigVJCompSlots |
1.3.6.1.4.1.33.22.3.1.1.3 |
Number of slots to be used by VJ compression. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
3..15 |
|
xPppIpcpConfigRangeStart |
1.3.6.1.4.1.33.22.3.1.1.4 |
Start of acceptable address range in which the negotiated
remote IP address must fall. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
xPppIpcpConfigRangeEnd |
1.3.6.1.4.1.33.22.3.1.1.5 |
End of acceptable address range in which the negotiated
remote IP address must fall. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
xPppIpcpConfigState |
1.3.6.1.4.1.33.22.3.1.1.6 |
Controls whether IPCP is allowed to run on this port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
xPppIpcpConfigLocalRangeStart |
1.3.6.1.4.1.33.22.3.1.1.7 |
Start of acceptable address range in which the negotiated
local IP address must fall. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
xPppIpcpConfigLocalRangeEnd |
1.3.6.1.4.1.33.22.3.1.1.8 |
End of acceptable address range in which the negotiated
local IP address must fall. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
xPppIpcpConfigPppIpMask |
1.3.6.1.4.1.33.22.3.1.1.9 |
The subnet mask to use for a PPP operation on the port.
Corresponds directly to the value labeled 'IP Mask:' in the
PPP PORT IP CHARACTERISTICS display. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
xPppIpcpAsyncConfigEntry |
1.3.6.1.4.1.33.22.3.2.1 |
Management information about a particular PPP
Asynchronous LCP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppIpcpAsyncConfigEntry |
|
|
xPppIpcpAsyncConfigBrdcast |
1.3.6.1.4.1.33.22.3.2.1.1 |
Determines whether to forward an IP Broadcast or
not. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
xPppIpcpStatusEntry |
1.3.6.1.4.1.33.22.3.3.1 |
Status information about a particular PPP IPCP
session. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppIpcpStatusEntry |
|
|
xPppIpcpStatusState |
1.3.6.1.4.1.33.22.3.3.1.1 |
The current state of IPCP. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
closed(1), listen(2), requestSent(3), ackReceived(4), ackSent(5), open(6), closing(7) |
|
xPppIpcpRxPkts |
1.3.6.1.4.1.33.22.3.3.1.4 |
Total number of IP packets received. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpTxPkts |
1.3.6.1.4.1.33.22.3.3.1.5 |
Total number of IP packets transmitted. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpRxConReq |
1.3.6.1.4.1.33.22.3.3.1.6 |
The count of IPCP Configure Requests received from
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpTxConReq |
1.3.6.1.4.1.33.22.3.3.1.7 |
The count of IPCP Configure Requests transmitted to
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpRxConNak |
1.3.6.1.4.1.33.22.3.3.1.8 |
The count of IPCP Configure Naks received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpTxConNak |
1.3.6.1.4.1.33.22.3.3.1.9 |
The count of IPCP Configure Naks transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpRxConAck |
1.3.6.1.4.1.33.22.3.3.1.10 |
The count of IPCP Configure Acks received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpTxConAck |
1.3.6.1.4.1.33.22.3.3.1.11 |
The count of IPCP Configure Acks transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpRxConRej |
1.3.6.1.4.1.33.22.3.3.1.12 |
The count of IPCP Configure Rejects received from
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpTxConRej |
1.3.6.1.4.1.33.22.3.3.1.13 |
The count of IPCP Configure Rejects transmitted to
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpRxTrmReq |
1.3.6.1.4.1.33.22.3.3.1.14 |
The count of IPCP Terminate Requests received from
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpTxTrmReq |
1.3.6.1.4.1.33.22.3.3.1.15 |
The count of IPCP Terminate Requests transmitted to
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpRxTrmAck |
1.3.6.1.4.1.33.22.3.3.1.16 |
The count of IPCP Terminate Acks received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpTxTrmAck |
1.3.6.1.4.1.33.22.3.3.1.17 |
The count of IPCP Terminate Acks transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpcpStatusState2 |
1.3.6.1.4.1.33.22.3.3.1.18 |
The current state of IPCP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
initial(1), starting(2), closed(3), stopped(4), closing(5), stopping(6), reqSent(7), ackRcvd(8), ackSent(9), opened(10) |
|
xPppPapPassword |
1.3.6.1.4.1.33.22.4.1 |
The password to use for PAP authentication. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
xPppAuthConfigTable |
1.3.6.1.4.1.33.22.4.2 |
A table containing PPP specific variables for this
PPP implementation. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
XPppAuthConfigEntry |
|
xPppAuthConfigEntry |
1.3.6.1.4.1.33.22.4.2.1 |
Management information about a particular PPP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppAuthConfigEntry |
|
|
xPppAuthChapChallengeTimer |
1.3.6.1.4.1.33.22.4.2.1.4 |
Length of time in minutes between CHAP reauthentication challenges.
A value of zero disables the timer. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..120 |
|
xPppAuthPapConfigState |
1.3.6.1.4.1.33.22.4.2.1.5 |
Controls the type of Pap authentication required for this port,
and whether it is combined with another authentication
mechanism such as Radius. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2), kerberos(3), radius(4) |
|
xPppAuthChapConfigState |
1.3.6.1.4.1.33.22.4.2.1.6 |
Controls the type of Chap authentication required for this port,
and whether it is combined with another authentication
mechanism such as Radius. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2), radius(4) |
|
xPppAuthStatusTable |
1.3.6.1.4.1.33.22.4.3 |
A table containing PPP specific variables for this
PPP implementation. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
XPppAuthStatusEntry |
|
xPppAuthStatusEntry |
1.3.6.1.4.1.33.22.4.3.1 |
Management information about a particular PPP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppAuthStatusEntry |
|
|
xPppPapStatusState |
1.3.6.1.4.1.33.22.4.3.1.4 |
The current state of PAP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
initial(1), closed(2), stopped(3), closing(4), reqSent(5), ackRecv(6), ackSent(7), opened(8), kerberosReqSent(9), kerberosStopped(10), kerberosAckRecv(11), kerberosAckSent(12), papKerberosOpened(13) |
|
xPppChapStatusState |
1.3.6.1.4.1.33.22.4.3.1.5 |
The current state of CHAP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
idle(1), challengeWait(2), challengeSent(3), responseSent(4), challengeSentResponseSent(5), challengeSentAckRecv(6), open(7) |
|
xPppChapPassword |
1.3.6.1.4.1.33.22.4.4 |
The password to use for CHAP authentication. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
xPppIpxcpConfigEntry |
1.3.6.1.4.1.33.22.5.1.1 |
Management information about a particular PPP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppIpxcpConfigEntry |
|
|
xPppIpxcpCipxCompression |
1.3.6.1.4.1.33.22.5.1.1.1 |
Controls whether CIPX compression will be negotiated on the
interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
xPppIpxcpConfigRemoteNode |
1.3.6.1.4.1.33.22.5.1.1.2 |
The IPX Node address which can be offered to the peer if
it does not know a Node number but requires one. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(6) |
|
xPppIpxcpStatusEntry |
1.3.6.1.4.1.33.22.5.2.1 |
Management information about a particular PPP. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppIpxcpStatusEntry |
|
|
xPppIpxcpStatusState |
1.3.6.1.4.1.33.22.5.2.1.1 |
The current state of IPXCP. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
initial(1), starting(2), closed(3), stopped(4), closing(5), stopping(6), reqSent(7), ackRcvd(8), ackSent(9), opened(10) |
|
xPppIpxcpCipxInCompression |
1.3.6.1.4.1.33.22.5.2.1.2 |
The current state of CIPX compression inbound. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
open(1), closed(2) |
|
xPppIpxcpCipxOutCompression |
1.3.6.1.4.1.33.22.5.2.1.3 |
The current state of CIPX compression outbound. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
open(1), closed(2) |
|
xPppIpxcpCipxInSlots |
1.3.6.1.4.1.33.22.5.2.1.4 |
The current number of CIPX compression inbound slots. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
xPppIpxcpCipxOutSlots |
1.3.6.1.4.1.33.22.5.2.1.5 |
The current number of CIPX compression outbound slots. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
xPppIpxcpStatusRemoteNode |
1.3.6.1.4.1.33.22.5.2.1.6 |
The IPX Node address currently being used by the Remote
IPX peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(6) |
|
xPppIpxcpCountersEntry |
1.3.6.1.4.1.33.22.5.3.1 |
Counter information about a particular PPP IPXCP
session. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
XPppIpxcpCountersEntry |
|
|
xPppIpxcpRxConReq |
1.3.6.1.4.1.33.22.5.3.1.1 |
The count of IPXCP Configure Requests received from
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpTxConReq |
1.3.6.1.4.1.33.22.5.3.1.2 |
The count of IPXCP Configure Requests transmitted to
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpRxConNak |
1.3.6.1.4.1.33.22.5.3.1.3 |
The count of IPXCP Configure Naks received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpTxConNak |
1.3.6.1.4.1.33.22.5.3.1.4 |
The count of IPXCP Configure Naks transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpRxConAck |
1.3.6.1.4.1.33.22.5.3.1.5 |
The count of IPXCP Configure Acks received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpTxConAck |
1.3.6.1.4.1.33.22.5.3.1.6 |
The count of IPXCP Configure Acks transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpRxConRej |
1.3.6.1.4.1.33.22.5.3.1.7 |
The count of IPXCP Configure Rejects received from
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpTxConRej |
1.3.6.1.4.1.33.22.5.3.1.8 |
The count of IPXCP Configure Rejects transmitted to
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpRxTrmReq |
1.3.6.1.4.1.33.22.5.3.1.9 |
The count of IPXCP Terminate Requests received from
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpTxTrmReq |
1.3.6.1.4.1.33.22.5.3.1.10 |
The count of IPXCP Terminate Requests transmitted to
the peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpRxTrmAck |
1.3.6.1.4.1.33.22.5.3.1.11 |
The count of IPXCP Terminate Acks received from the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
xPppIpxcpTxTrmAck |
1.3.6.1.4.1.33.22.5.3.1.12 |
The count of IPXCP Terminate Acks transmitted to the
peer. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|