MRV-IR-SYSTEM-MIB

File: MRV-IR-SYSTEM-MIB.mib (37399 bytes)

Imported modules

Imported symbols

OBJECT-TYPE	MODULE-IDENTITY	enterprises
IpAddress	Counter32	DisplayString
RowStatus

Defined Types

TrapSeverity
INTEGER	cleared(1), informational(2), warning(3), minor(4), major(5), critical(6)

TarCreator
INTEGER	other(1), system(2), snmp(3)

TarTrigType
INTEGER	other(1), temp(2), humidity(3), instant(4), ping(5), pattern(6), inputSignal(7), compound(8), bootp(9), alarm(10), hdam(11), power(12), analog(13), powerReg(14), powerInput(15), onboardTemp(16), duration(17), hdampower(18), hdampowerReg(19), hdampowerInput(20), powerLoad(21), powerLoadInput(22), powerContact(23), upsBattery(24)

IrPowerSupplyEntry
SEQUENCE
	irPowerIndex	INTEGER
	irPowerUnitPresent	INTEGER
	irPowerInputStatus	INTEGER
	irPowerOutputStatus	INTEGER
	irPowerStatus	INTEGER
	irPowerInputVoltage	DisplayString
	irPowerOutputVoltage	DisplayString

IrClusterEntry
SEQUENCE
	irClusterIpAddr	IpAddress
	irClusterStatus	RowStatus

IrEnetPortConfigEntry
SEQUENCE
	irEnetPortIndex	INTEGER
	irEnetPortSpeed	INTEGER
	irEnetPortDuplexMode	INTEGER
	irEnetPortAutoNegotiation	INTEGER
	irEnetPortPhysMedia	INTEGER
	irEnetPortLinkStatus	INTEGER
	irEnetPortBondingStatus	INTEGER

IrEnetPortStatsEntry
SEQUENCE
	irEnetPortRecvBytes	Counter32
	irEnetPortRecvPackets	Counter32
	irEnetPortRecvErrors	Counter32
	irEnetPortRecvDropped	Counter32
	irEnetPortRecvOverruns	Counter32
	irEnetPortRecvFrameErrors	Counter32
	irEnetPortRecvMulticast	Counter32
	irEnetPortRecvCompressed	Counter32
	irEnetPortXmitBytes	Counter32
	irEnetPortXmitPackets	Counter32
	irEnetPortXmitErrors	Counter32
	irEnetPortXmitDropped	Counter32
	irEnetPortXmitOverruns	Counter32
	irEnetPortXmitCollisions	Counter32
	irEnetPortXmitCompressed	Counter32
	irEnetPortXmitCarrier	Counter32

IrIfEntry
SEQUENCE
	irIfIndex	INTEGER
	irIfIpAddress	IpAddress
	irIfIpSubnetMask	IpAddress
	irIfIpBcastAddress	IpAddress
	irIfMtu	INTEGER
	irIfName	DisplayString
	irIfBoundTo	DisplayString
	irIfTelnetPort	INTEGER
	irIfSshPort	INTEGER

TarTrigEntry
SEQUENCE
	tarTrigIndex	INTEGER
	tarTrigName	DisplayString
	tarTrigType	TarTrigType
	tarTrigCreator	TarCreator
	tarTrigRowStatus	RowStatus

TarActionEntry
SEQUENCE
	tarActionIndex	INTEGER
	tarActionName	DisplayString
	tarActionCommand	DisplayString
	tarActionCreator	TarCreator
	tarActionRowStatus	RowStatus

TarRuleEntry
SEQUENCE
	tarRuleIndex	INTEGER
	tarRuleName	DisplayString
	tarRuleTrigId	INTEGER
	tarRuleActionId	INTEGER
	tarRuleStatus	INTEGER
	tarRuleExecCount	Counter32
	tarRuleErrorCount	Counter32
	tarRuleCreator	TarCreator
	tarRuleRowStatus	RowStatus

TarTempTrigEntry
SEQUENCE
	tarTempTrigPort	INTEGER
	tarTempTrigOperator	INTEGER
	tarTempTrigThresholdValue	INTEGER
	tarTempTrigUnits	INTEGER
	tarTempTrigHysteresis	INTEGER

TarSigTrigEntry
SEQUENCE
	tarSigTrigPort	INTEGER
	tarSigTrigSignal	INTEGER
	tarSigTrigState	INTEGER

Defined Values

mrvBpd		1.3.6.1.4.1.33
OBJECT IDENTIFIER

mrvLx		1.3.6.1.4.1.33.100
OBJECT IDENTIFIER

irSystemMib		1.3.6.1.4.1.33.100.1
This is the MRV LX System MIB module.
MODULE-IDENTITY

irSysSystem		1.3.6.1.4.1.33.100.1.1
OBJECT IDENTIFIER

irDevices		1.3.6.1.4.1.33.100.1.2
OBJECT IDENTIFIER

irTraps		1.3.6.1.4.1.33.100.1.3
OBJECT IDENTIFIER

irCluster		1.3.6.1.4.1.33.100.1.4
OBJECT IDENTIFIER

irEthernet		1.3.6.1.4.1.33.100.1.5
OBJECT IDENTIFIER

irPower		1.3.6.1.4.1.33.100.1.6
OBJECT IDENTIFIER

irInterfaces		1.3.6.1.4.1.33.100.1.7
OBJECT IDENTIFIER

irTar		1.3.6.1.4.1.33.100.1.8
OBJECT IDENTIFIER

irIpmi		1.3.6.1.4.1.33.100.1.9
OBJECT IDENTIFIER

irDeviceLx		1.3.6.1.4.1.33.100.1.2.1
OBJECT IDENTIFIER

irLx1001		1.3.6.1.4.1.33.100.1.2.1.1
OBJECT IDENTIFIER

irLx1002		1.3.6.1.4.1.33.100.1.2.1.2
OBJECT IDENTIFIER

irLx1004		1.3.6.1.4.1.33.100.1.2.1.3
OBJECT IDENTIFIER

irLx4008		1.3.6.1.4.1.33.100.1.2.1.4
OBJECT IDENTIFIER

irLx4016		1.3.6.1.4.1.33.100.1.2.1.5
OBJECT IDENTIFIER

irLx4032		1.3.6.1.4.1.33.100.1.2.1.6
OBJECT IDENTIFIER

irLx4048		1.3.6.1.4.1.33.100.1.2.1.7
OBJECT IDENTIFIER

irLxEm316		1.3.6.1.4.1.33.100.1.2.1.8
OBJECT IDENTIFIER

irLx8020		1.3.6.1.4.1.33.100.1.2.1.9
OBJECT IDENTIFIER

irLx8040		1.3.6.1.4.1.33.100.1.2.1.10
OBJECT IDENTIFIER

irLx4000T		1.3.6.1.4.1.33.100.1.2.1.11
OBJECT IDENTIFIER

irLx7304T		1.3.6.1.4.1.33.100.1.2.1.12
OBJECT IDENTIFIER

irLx4108T		1.3.6.1.4.1.33.100.1.2.1.13
OBJECT IDENTIFIER

irSysImageFilename		1.3.6.1.4.1.33.100.1.1.1
The name of the image file running on the system.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

irSysImageSource		1.3.6.1.4.1.33.100.1.1.2
This indicates from where the image file was loaded. A value of flash(1) means the file was loaded from flash. A value of network(2) means the file was loaded from the server identified by irSysImageServer object.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	flash(1), network(2)

irSysImageServer		1.3.6.1.4.1.33.100.1.1.3
The IP address of the server to be used when retrieving the image file via the network.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

irSysSwVersion		1.3.6.1.4.1.33.100.1.1.4
A string indicating the software version running on the system.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

irSysSwBootVersion		1.3.6.1.4.1.33.100.1.1.5
A string indicating the boot software version running on the system.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

irSysIpAddress		1.3.6.1.4.1.33.100.1.1.6
The IP address assigned to the ethernet interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

irSysSubnetMask		1.3.6.1.4.1.33.100.1.1.7
The IP subnet mask assigned to the ethernet interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

irSysBcastAddress		1.3.6.1.4.1.33.100.1.1.8
The IP broadcast address assigned to the ethernet interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

irSysGateway		1.3.6.1.4.1.33.100.1.1.9
The default gateway IP address configured for the system.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

irSysAction		1.3.6.1.4.1.33.100.1.1.10
A read of this object always returns the value other(1). Setting this object to saveConfig(2) saves the current config to flash. Setting this object to reset(3) resets the device.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), saveConfig(2), reset(3)

irSysSnmpSetErrorString		1.3.6.1.4.1.33.100.1.1.11
A text string that provides additional info when an snmp set request fails.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

irSysModelType		1.3.6.1.4.1.33.100.1.1.12
The device model type string.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

irSysPowerType		1.3.6.1.4.1.33.100.1.1.13
The type of power used by the device.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	powerAC(1), powerDC(2)

irSysCurrentTemp		1.3.6.1.4.1.33.100.1.1.14
The current temp reading (in celsius) for the onboard temperature sensor.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

irSysTempThresholdLow		1.3.6.1.4.1.33.100.1.1.15
The low threshold temp setting (in celsius) for the device.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

irSysTempThresholdHigh		1.3.6.1.4.1.33.100.1.1.16
The high threshold temp setting (in celsius) for the device.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

irSysTempHysteresis		1.3.6.1.4.1.33.100.1.1.18
The hysteresis setting applied to the temp thresholds for the device.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..5

irSysPowerLostTimestamp		1.3.6.1.4.1.33.100.1.1.19
A string containing the timestamp when the device last lost power.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

irSysFipsMode		1.3.6.1.4.1.33.100.1.1.20
The fips mode status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

irSysFlashMemSize		1.3.6.1.4.1.33.100.1.1.21
The size of flash memory, in megabytes, on the system.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	s8M(1), s16M(2)

irSysAssetTag		1.3.6.1.4.1.33.100.1.1.22
The configured asset tag string.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

irSysPowerCurrentLoad		1.3.6.1.4.1.33.100.1.1.23
An Ascii string indicating the total current load, in Amps, used by all power strips attached to this device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

irPowerSupplyTable		1.3.6.1.4.1.33.100.1.6.1
A list of power supply entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IrPowerSupplyEntry

irPowerSupplyEntry		1.3.6.1.4.1.33.100.1.6.1.1
A power supply entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	IrPowerSupplyEntry

irPowerIndex		1.3.6.1.4.1.33.100.1.6.1.1.1
The index of the power unit.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

irPowerUnitPresent		1.3.6.1.4.1.33.100.1.6.1.1.2
This indicates if the power unit is present or not.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	yes(1), no(2)

irPowerInputStatus		1.3.6.1.4.1.33.100.1.6.1.1.3
This indicates if the power unit is plugged into a power source.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

irPowerOutputStatus		1.3.6.1.4.1.33.100.1.6.1.1.4
This indicates the status of the internal power feed to the device components.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2)

irPowerStatus		1.3.6.1.4.1.33.100.1.6.1.1.5
The overall status of the power unit.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	on(1), off(2), failed(3)

irPowerInputVoltage		1.3.6.1.4.1.33.100.1.6.1.1.6
The input voltage reading.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

irPowerOutputVoltage		1.3.6.1.4.1.33.100.1.6.1.1.7
The output voltage reading.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

irClusterGrp		1.3.6.1.4.1.33.100.1.4.1
OBJECT IDENTIFIER

irClusterCfgStatus		1.3.6.1.4.1.33.100.1.4.1.1
This indicates whether cluster config feature is enabled or disabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

irClusterName		1.3.6.1.4.1.33.100.1.4.1.2
The name assigned to the cluster.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

irClusterSyncStatus		1.3.6.1.4.1.33.100.1.4.1.3
The cluster synch update status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), syncInProgress(2), syncCompletedSuccess(3), syncCompletedError(4)

irClusterAction		1.3.6.1.4.1.33.100.1.4.1.4
A read of this object always returns the value other(1). Setting this obejct to flushAll(2) will delete all entries configured in the irClusterTable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), flushAll(2)

irClusterTable		1.3.6.1.4.1.33.100.1.4.2
A list of cluster config entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IrClusterEntry

irClusterEntry		1.3.6.1.4.1.33.100.1.4.2.1
A cluster config entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	IrClusterEntry

irClusterIpAddr		1.3.6.1.4.1.33.100.1.4.2.1.1
The IP address of the cluster entry.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

irClusterStatus		1.3.6.1.4.1.33.100.1.4.2.1.2
The row status value for the entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

irEnetPortConfigTable		1.3.6.1.4.1.33.100.1.5.1
A list of ethernet port config entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IrEnetPortConfigEntry

irEnetPortConfigEntry		1.3.6.1.4.1.33.100.1.5.1.1
An ethernet port config entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	IrEnetPortConfigEntry

irEnetPortIndex		1.3.6.1.4.1.33.100.1.5.1.1.1
The port index for this enthernet port entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

irEnetPortSpeed		1.3.6.1.4.1.33.100.1.5.1.1.2
The port speed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	sp10M(1), sp100M(2)

irEnetPortDuplexMode		1.3.6.1.4.1.33.100.1.5.1.1.3
The port duplex mode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), halfDuplex(2), fullDuplex(3)

irEnetPortAutoNegotiation		1.3.6.1.4.1.33.100.1.5.1.1.4
The port auto negotiation mode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), auto(2)

irEnetPortPhysMedia		1.3.6.1.4.1.33.100.1.5.1.1.5
The physical media type.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enet(1), sfp(2)

irEnetPortLinkStatus		1.3.6.1.4.1.33.100.1.5.1.1.6
The ethernet port link status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

irEnetPortBondingStatus		1.3.6.1.4.1.33.100.1.5.1.1.7
The ethernet port bonding status. For systems with only a single ethernet port, the value will always be none(1).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), active(2), backup(3)

irEnetPortStatsTable		1.3.6.1.4.1.33.100.1.5.2
A list of ethernet port stats entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IrEnetPortStatsEntry

irEnetPortStatsEntry		1.3.6.1.4.1.33.100.1.5.2.1
An ethernet port stats entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	IrEnetPortStatsEntry

irEnetPortRecvBytes		1.3.6.1.4.1.33.100.1.5.2.1.1
The number of bytes received on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortRecvPackets		1.3.6.1.4.1.33.100.1.5.2.1.2
The number of packets received on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortRecvErrors		1.3.6.1.4.1.33.100.1.5.2.1.3
The number of packets received with error.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortRecvDropped		1.3.6.1.4.1.33.100.1.5.2.1.4
The number of received packets dropped.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortRecvOverruns		1.3.6.1.4.1.33.100.1.5.2.1.5
The number of received packets that ran out of buffers.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortRecvFrameErrors		1.3.6.1.4.1.33.100.1.5.2.1.6
The number of packets received with frame errors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortRecvMulticast		1.3.6.1.4.1.33.100.1.5.2.1.7
The number of received multicast packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortRecvCompressed		1.3.6.1.4.1.33.100.1.5.2.1.8
The number of received compressed packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortXmitBytes		1.3.6.1.4.1.33.100.1.5.2.1.9
The number of bytes transmitted on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortXmitPackets		1.3.6.1.4.1.33.100.1.5.2.1.10
The number of packets transmitted on this port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortXmitErrors		1.3.6.1.4.1.33.100.1.5.2.1.11
The number of packets that encountered an error on transmission.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortXmitDropped		1.3.6.1.4.1.33.100.1.5.2.1.12
The number of packets that were dropped due to transmit errors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortXmitOverruns		1.3.6.1.4.1.33.100.1.5.2.1.13
The number of packets that ran out of buffers.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortXmitCollisions		1.3.6.1.4.1.33.100.1.5.2.1.14
The number of packets that encountered collisions on transmission.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortXmitCompressed		1.3.6.1.4.1.33.100.1.5.2.1.15
The number of transmitted compressed packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irEnetPortXmitCarrier		1.3.6.1.4.1.33.100.1.5.2.1.16
The number of transmitted carrier errors.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

irIfTable		1.3.6.1.4.1.33.100.1.7.1
A list of IP interface entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		IrIfEntry

irIfEntry		1.3.6.1.4.1.33.100.1.7.1.1
An IP interface entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	IrIfEntry

irIfIndex		1.3.6.1.4.1.33.100.1.7.1.1.1
The index for this interface entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

irIfIpAddress		1.3.6.1.4.1.33.100.1.7.1.1.2
The IP address assigned to this interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

irIfIpSubnetMask		1.3.6.1.4.1.33.100.1.7.1.1.3
The subnet mask assigned to this interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

irIfIpBcastAddress		1.3.6.1.4.1.33.100.1.7.1.1.4
The broadcast address assigned to this interface.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

irIfMtu		1.3.6.1.4.1.33.100.1.7.1.1.5
The MTU size assigned to this interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..1500

irIfName		1.3.6.1.4.1.33.100.1.7.1.1.6
The name string assigned to this interface.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

irIfBoundTo		1.3.6.1.4.1.33.100.1.7.1.1.7
The name of the physical interface to which this interface is bound.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

irIfTelnetPort		1.3.6.1.4.1.33.100.1.7.1.1.8
The telnet port to use when connecting via this interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

irIfSshPort		1.3.6.1.4.1.33.100.1.7.1.1.9
The ssh port to use when connecting via this interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

irTarSys		1.3.6.1.4.1.33.100.1.8.1
OBJECT IDENTIFIER

irTarTable		1.3.6.1.4.1.33.100.1.8.2
OBJECT IDENTIFIER

tarNextFreeTrigIndex		1.3.6.1.4.1.33.100.1.8.1.1
The next free index in the trigger table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

tarNextFreeActionIndex		1.3.6.1.4.1.33.100.1.8.1.2
The next free index in the trigger action table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

tarNextFreeRuleIndex		1.3.6.1.4.1.33.100.1.8.1.3
The next free index in the trigger rule table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..200

tarTrigTable		1.3.6.1.4.1.33.100.1.8.2.1
A list of trigger entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TarTrigEntry

tarTrigEntry		1.3.6.1.4.1.33.100.1.8.2.1.1
A trigger entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	TarTrigEntry

tarTrigIndex		1.3.6.1.4.1.33.100.1.8.2.1.1.1
The index for this trigger entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tarTrigName		1.3.6.1.4.1.33.100.1.8.2.1.1.2
The name assigned to this trigger.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

tarTrigType		1.3.6.1.4.1.33.100.1.8.2.1.1.3
The type of trigger.
Status: current	Access: read-write
OBJECT-TYPE
	TarTrigType

tarTrigCreator		1.3.6.1.4.1.33.100.1.8.2.1.1.4
The creator of this trigger.
Status: current	Access: read-only
OBJECT-TYPE
	TarCreator

tarTrigRowStatus		1.3.6.1.4.1.33.100.1.8.2.1.1.5
The row status for this trigger.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

tarActionTable		1.3.6.1.4.1.33.100.1.8.2.2
A list of trigger action entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TarActionEntry

tarActionEntry		1.3.6.1.4.1.33.100.1.8.2.2.1
A trigger action entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	TarActionEntry

tarActionIndex		1.3.6.1.4.1.33.100.1.8.2.2.1.1
The index for this action entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tarActionName		1.3.6.1.4.1.33.100.1.8.2.2.1.2
The name string assigned to this action.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..19)

tarActionCommand		1.3.6.1.4.1.33.100.1.8.2.2.1.3
The command string assigned to this action.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..135)

tarActionCreator		1.3.6.1.4.1.33.100.1.8.2.2.1.4
The creator of this trigger.
Status: current	Access: read-only
OBJECT-TYPE
	TarCreator

tarActionRowStatus		1.3.6.1.4.1.33.100.1.8.2.2.1.5
The status for this action entry.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

tarRuleTable		1.3.6.1.4.1.33.100.1.8.2.3
A list of trigger rule entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TarRuleEntry

tarRuleEntry		1.3.6.1.4.1.33.100.1.8.2.3.1
A trigger rule entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	TarRuleEntry

tarRuleIndex		1.3.6.1.4.1.33.100.1.8.2.3.1.1
The index for this rule entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

tarRuleName		1.3.6.1.4.1.33.100.1.8.2.3.1.2
The name string assigned to this rule.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..64)

tarRuleTrigId		1.3.6.1.4.1.33.100.1.8.2.3.1.3
The trigger index entry to which this rule is attached.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

tarRuleActionId		1.3.6.1.4.1.33.100.1.8.2.3.1.4
The trigger action entry to which this rule is attached.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

tarRuleStatus		1.3.6.1.4.1.33.100.1.8.2.3.1.5
The status for this entry.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

tarRuleExecCount		1.3.6.1.4.1.33.100.1.8.2.3.1.6
The number of times the action command for this rule has been executed since the system was started.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

tarRuleErrorCount		1.3.6.1.4.1.33.100.1.8.2.3.1.7
The number of times the execution of this rule has resulted in an error.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

tarRuleCreator		1.3.6.1.4.1.33.100.1.8.2.3.1.8
The creator of this rule.
Status: current	Access: read-only
OBJECT-TYPE
	TarCreator

tarRuleRowStatus		1.3.6.1.4.1.33.100.1.8.2.3.1.9
The row status for this entry.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

tarTempTrigTable		1.3.6.1.4.1.33.100.1.8.2.4
A list of temp trigger entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TarTempTrigEntry

tarTempTrigEntry		1.3.6.1.4.1.33.100.1.8.2.4.1
A temp trigger entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	TarTempTrigEntry

tarTempTrigPort		1.3.6.1.4.1.33.100.1.8.2.4.1.1
The port to which this trigger is attached.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..40

tarTempTrigOperator		1.3.6.1.4.1.33.100.1.8.2.4.1.2
The logical operator for this trigger.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	lessThan(1), greaterThan(2)

tarTempTrigThresholdValue		1.3.6.1.4.1.33.100.1.8.2.4.1.3
The threshold value for this trigger.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1000

tarTempTrigUnits		1.3.6.1.4.1.33.100.1.8.2.4.1.4
The units for the threshold value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	celsius(1), fahrenheit(2)

tarTempTrigHysteresis		1.3.6.1.4.1.33.100.1.8.2.4.1.5
The hysteresis value for this trigger.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..10

tarSigTrigTable		1.3.6.1.4.1.33.100.1.8.2.6
A list of signal trigger entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TarSigTrigEntry

tarSigTrigEntry		1.3.6.1.4.1.33.100.1.8.2.6.1
A signal trigger entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	TarSigTrigEntry

tarSigTrigPort		1.3.6.1.4.1.33.100.1.8.2.6.1.1
The port to which this trigger is attached.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..40

tarSigTrigSignal		1.3.6.1.4.1.33.100.1.8.2.6.1.2
The input signal type being monitored.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	cts(1), dsr(2)

tarSigTrigState		1.3.6.1.4.1.33.100.1.8.2.6.1.3
The signal state that will cause the action to be taken.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	low(1), high(2)

irIpmiSys		1.3.6.1.4.1.33.100.1.9.1
OBJECT IDENTIFIER

ipmiDiscreteOffset		1.3.6.1.4.1.33.100.1.9.1.1
The offset within the discrete sensor for which the event occurred.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..15

ipmiDiscreteSensorName		1.3.6.1.4.1.33.100.1.9.1.2
An Ascii string indicating the name of the IPMI discrete sensor for which the event occurred.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..98)

ipmiThresholdType		1.3.6.1.4.1.33.100.1.9.1.3
The type of threshold sensor event.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	lowerNonCritical(1), lowerCritical(2), lowerNonRecoverable(3), upperNonCritical(4), upperCritical(5), upperNonRecoverable(6)

ipmiThresholdSensorName		1.3.6.1.4.1.33.100.1.9.1.4
An Ascii string indicating the name of the IPMI threshold sensor for which the event occurred.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..98)

ipmiThresholdDirection		1.3.6.1.4.1.33.100.1.9.1.5
The direction of the threshold sensor event.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	goingLow(1), goingHigh(2)

ipmiThresholdAssert		1.3.6.1.4.1.33.100.1.9.1.6
The assertion value of the threshold sensor event.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	assertion(1), deassertion(2)

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor