MSERIES-TC

File: MSERIES-TC.mib (8478 bytes)

Imported modules

SNMPv2-SMI

SNMPv2-TC

MSERIES-MIB

Imported symbols

MODULE-IDENTITY

TEXTUAL-CONVENTION

mseries

Defined Types

AlarmPerceivedSeverity
Alarm severity as defined in ITU-T X.733.
TEXTUAL-CONVENTION
	INTEGER	cleared(1), indeterminate(2), critical(3), major(4), minor(5), warning(6)

AlarmNotificationType
Type of alarm as defined in ITU-T X.733.
TEXTUAL-CONVENTION
	INTEGER	undefined(0), other(1), communicationsAlarm(2), qualityOfServiceAlarm(3), processingErrorAlarm(4), equipmentAlarm(5), environmental(6), integrityViolation(7), operationalViolation(8), physicalViolation(9), securityServiceOrMechanismViloation(10), timeDomainViolation(11)

AlarmProbableCause
Alarm probable cause as defined in ITU-T X.733.
TEXTUAL-CONVENTION
	INTEGER	undefined(0), adapterError(1), applicationSubsystemFailure(2), bandwidthReduced(3), callEstablishmentError(4), communicationsProtocolError(5), communicationsSubsystemFailure(6), configurationOrCustomizationError(7), congestion(8), corruptData(9), cpuCyclesLimitExceeded(10), dTEdCEInterfaceError(11), datasetOrModemError(12), degradedSignal(13), enclosureDoorOpen(14), equipmentMalfunction(15), excessiveVibration(16), fileError(17), fireDetected(18), floodDetected(19), framingError(20), heatingOrVentilationOrCoolingSystemProblem(21), humidityUnacceptable(22), inputDeviceError(23), inputOutputDeviceError(24), lANError(25), leakDetected(26), localNodeTransmissionError(27), lossOfFrame(28), lossOfSignal(29), materialSupplyExhausted(30), multiplexerProblem(31), outOfMemory(32), outputDeviceError(33), performanceDegraded(34), powerProblem(35), pressureUnacceptable(36), processorProblem(37), pumpFailure(38), queueSizeExceeded(39), receiveFailure(40), receiverFailure(41), remoteNodeTransmissionError(42), resourceAtOrNearingCapacity(43), responseTimeExcessive(44), retransmissionRateExcessive(45), softwareProgramError(46), softwareError(47), softwareProgramAbnormallyTerminated(48), storageCapacityProblem(49), temperatureUnacceptable(50), thresholdCrossed(51), timingProblem(52), toxicLeakDetected(53), transmitFailure(54), transmitterFailure(55), underlyingResourceUnavailable(56), versionMismatch(57)

UnitType
The unit type in the M-Series. nmb - Network Management Board. The controlling board of the M-Series. psu1 - The Power Supply in slot 1 of the M-Series. psu2 - The Power Supply in slot 2 of the M-Series. fan - The Fan of the M-Series. system - The chassis. slaveNmb - Network Management Board of the Cascading system. slavePsu1 - The Power Supply in slot 1 of the Cascading M-Series. slavePsu2 - The Power Supply in slot 2 of the Cascading M-Series. slaveFan - The Fan of the Cascading M-Series.
TEXTUAL-CONVENTION
	INTEGER	nmb(1), psu1(2), psu2(3), fan(4), system(5), slaveNmb(6), slavePsu1(7), slavePsu2(8), slaveFan(9)

PortType
Port direction. rx - The port direction is receiving(Rx). tx - The port direction is transmitting(Tx). biDi - The port direction is both transmitting and receiving.
TEXTUAL-CONVENTION
	INTEGER	rx(1), tx(2), biDi(3)

PortStatus
The operational state for a port. idle - The port is not activated down - The port traffic is lost. up - There is traffic on the port. high - The port got to high power. low - The port got to low power. eyeSafety - The Line Tx port is in Eye Safety Mode. This means that either the connector on the Line Tx port is not inserted or that you have too strong reflection from the line fiber. cd - Channel detected. ncd - No channel detected.
TEXTUAL-CONVENTION
	INTEGER	idle(1), down(2), up(3), high(4), low(5), eyeSafety(6), cd(7), ncd(8)

PortMode
Port Mode. normal - The port is active. Alarms are not suppressed. service - the port is in Service Mode. Alarms are beeing suppressed. When service is ready the Port Mode should be set back to normal.
TEXTUAL-CONVENTION
	INTEGER	normal(1), service(2)

Defined Values

smartTcMIB		1.3.6.1.4.1.30826.1.5
This is the enterprise specific TC MIB for SmartOptics M-Series
MODULE-IDENTITY

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor