MWRM-NETWORK-MIB

File: MWRM-NETWORK-MIB.mib (506688 bytes)

Imported modules

SNMPv2-SMI RFC1213-MIB SNMPv2-TC
RFC-1215 MWRM-UNIT-MIB

Imported symbols

Counter64 Counter32 enterprises
Gauge32 IpAddress DisplayString
ifIndex RowStatus MacAddress
OBJECT-TYPE TRAP-TYPE EnableDisable
EnableDisableSMI2 OffOn MetricImperial
AllowedNotAllowed ProgressStatus Severity
NoYes DownUp TrailIfType
PmTableType RateMbps HalfFull
BerLevel SignalLevel LoopbackType
QueueName RadioId RfuId
SwCommand TrailProtectedType ClockSrc
SlotId Integrity GreenYellow
InputSeverity SwCommandTimer

Defined Types

MediaType  
INTEGER auto-type(0), rj45(1), sfp(2), radio(3), pwe3(4)    

AutoNegMode  
INTEGER off(0), on(1), restart(2)    

SpeedDefs  
INTEGER speed-10(0), speed-100(1), speed-1000(2), speed-2500(3), speed-10000(4)    

MasterSalveSetMode  
INTEGER auto(0), slave(1), master(2)    

FlowControl  
INTEGER disable(0), rx(1), tx-rx(2)    

PortType  
INTEGER management(0), line(1), radio(2), pwe(3), cpu(4)    

EdgePortType  
INTEGER none(0), edge(1)    

TrustMode  
INTEGER untrust(0), trust(1)    

ServiceType  
INTEGER mng(0), mp(1), p2p(2)    

ServiceSubType  
INTEGER ethernet(0), tdm(1), pwe(2)    

ServiceAdmin  
INTEGER reserved(0), operational(1)    

ServiceCosMode  
INTEGER default-cos(0), preserve-sp-cos(1)    

SPType  
INTEGER sap(0), snp(1), mng(2), pipe(3)    

SPSubType  
INTEGER dot1q(0), s-tag(1), bundle-c(2), bundle-s(3), all-to-one(4), qinq(5)    

DisableAllowed  
INTEGER disable(0), allow(1)    

SPCosMode  
INTEGER sp-def-cos(0), interface-decision(1), pc1(2), tcam(3)    

SplitHorizonGroup  
INTEGER group-a(0), group-b(1), group-c(2), group-d(3)    

TrueFalse  
INTEGER false(0), true(1)    

PolicerType  
INTEGER mef-trtcm(0)    

PolicerColorMode  
INTEGER color-blind(0), color-aware(1)    

PWfpClockSignal  
INTEGER sync(0), unframed(1), e1-mf(2), e1-mf-crc(3), ds1-d4(4), ds1-esf(5)    

PWCclockSysRef  
INTEGER none(0), front-panel(1), clock-recovery(2)    

PWCDiffClockSrc  
INTEGER none(0), front-panel(1), sys-ref(2), clock-1588(3)    

PWRtpTimeStampMode  
INTEGER absolute(0), differential(1)    

PWTunnelPsnType  
INTEGER upd-ip(0), eth(1), mpls(2)    

PWTunnelVlanType  
INTEGER none(0), c-type(1), s-type(2)    

PWPDHClockSource  
INTEGER sys-ref(0), rx-sdh(1), internal(2)    

TunnelGroupProtectionCmd  
INTEGER no-request(0), force-switch(1), manual-switch(2), lockout(3), clear(4)    

PWSOAMccmInterval  
INTEGER n3-3-ms(0), n10-ms(1), n100-ms(2), n1-s(3), n10-s(4), n1-m(5), n10-m(6)    

Dot1CfmInterfaceStatus  
INTEGER no-interface(0), up(1), down(2), testing(3), unknown(4), dormant(5), not-present(6), lower-layer-down(7)    

BurstType  
INTEGER short(0), long(1)    

IfMgrTrueFalse  
INTEGER true(1), false(2)    

MibTrueFalse  
INTEGER true(1), false(2)    

G8032LastState  
INTEGER nr(0), raps-nr(1), raps-rb-nr(2), running-wtb(3), expired-wtb(4), running-wtr(5), expired-wtr(6), ms(7), raps-ms(8), raps-sd(9), clear-sd(10), local-sd(11), raps-sf(12), clear-sf(13), local-sf(14), raps-fs(15), fs(16), clear(17)    

TDMLoopbackType  
INTEGER none(0), towards-line(1), towards-system(2)    

RSTLoopbackType  
INTEGER none(0), towards-system(1), towards-line(2)    

LBState  
INTEGER soamLbInactive(0), soamLbActive(1), soamLbStopped(2), soamLbCompleted(3), soamLbFailed(4)    

GenEquipNetworkManagmentIpAddrCfgEntry  
SEQUENCE    
  genEquipNetworkManagmentIpAddrCfgMngId INTEGER
  genEquipNetworkManagmentIpAddrCfgIpv4Address IpAddress
  genEquipNetworkManagmentIpAddrCfgIpv4SubnetMask IpAddress
  genEquipNetworkManagmentIpAddrCfgDefaultGateway IpAddress
  genEquipNetworkManagmentIpAddrCfgIpv6Address OCTET STRING
  genEquipNetworkManagmentIpAddrCfgIpv6PrefixLength INTEGER
  genEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6 OCTET STRING

GenEquipNetworkIPEntry  
SEQUENCE    
  genEquipNetworkIPEthernetPort INTEGER
  genEquipNetworkIPPeerMacAddr OCTET STRING
  genEquipNetworkIPPeerIPAddr IpAddress
  genEquipNetworkIPPeerSlotID INTEGER
  genEquipNetworkIPPeerPortNumber INTEGER
  genEquipNetworkIPPeerDescr DisplayString
  genEquipNetworkIPPeerNodeToNodeConnection EnableDisable

GenEquipEthernetSwitchCfgVIDEntry  
SEQUENCE    
  genEquipEthernetSwitchCfgVIDIndex INTEGER
  genEquipEthernetSwitchCfgVIDName DisplayString
  genEquipEthernetSwitchCfgVIDState INTEGER
  genEquipEthernetSwitchCfgVIDMemberPorts DisplayString
  genEquipEthernetSwitchCfgVIDEVCID DisplayString
  genEquipEthernetSwitchCfgVIDEVCDescription DisplayString
  genEquipEthernetSwitchCfgVIDRowStatus RowStatus

GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry  
SEQUENCE    
  genEquipEthernetSwitchXSTPParamsEthernetPortsState INTEGER
  genEquipEthernetSwitchXSTPParamsEthernetPortsRole INTEGER
  genEquipEthernetSwitchXSTPParamsEthernetPortsPathCost INTEGER
  genEquipEthernetSwitchXSTPParamsEthernetPortsPriority INTEGER
  genEquipEthernetSwitchXSTPParamsEthernetDesPathCost INTEGER
  genEquipEthernetSwitchXSTPParamsEthernetEdgePort NoYes

GenEquipEthernetSwitchQoSEntry  
SEQUENCE    
  genEquipEthernetSwitchQoSFirstCrit INTEGER
  genEquipEthernetSwitchQoSSecondCrit INTEGER
  genEquipEthernetSwitchQoSThirdCrit INTEGER
  genEquipEthernetSwitchQoSDefClassification INTEGER
  genEquipEthernetSwitchQoSEgressSched INTEGER
  genEquipEthernetSwitchQoSEgressShaper OffOn
  genEquipEthernetSwitchQoSEgressShaperRate INTEGER
  genEquipEthernetSwitchQoSIngressPolicer DisplayString

GenEquipEthernetSwitchVlanPbitRemapEntry  
SEQUENCE    
  genEquipEthernetSwitchVlanPbitRemapPbit INTEGER
  genEquipEthernetSwitchVlanPbitRemapRemappedPbit INTEGER

GenEquipEthernetSwitchQoSVLANIdToQueueEntry  
SEQUENCE    
  genEquipEthernetSwitchQoSVLANIdToQueueQueue QueueName

GenEquipEthernetSwitchEtmClassifierByMacEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmClassifierByMacIndex INTEGER
  genEquipEthernetSwitchEtmClassifierByMacValue OCTET STRING
  genEquipEthernetSwitchEtmClassifierByMacCos INTEGER
  genEquipEthernetSwitchEtmClassifierByMacColor GreenYellow
  genEquipEthernetSwitchEtmClassifierByMacRowStatus RowStatus

GenEquipEthernetSwitchEtmClassifierByUdpPortEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmClassifierByUdpPortIndex INTEGER
  genEquipEthernetSwitchEtmClassifierByUdpPortSrcPort INTEGER
  genEquipEthernetSwitchEtmClassifierByUdpPortDestPort INTEGER
  genEquipEthernetSwitchEtmClassifierByUdpPortCos INTEGER
  genEquipEthernetSwitchEtmClassifierByUdpPortColor GreenYellow
  genEquipEthernetSwitchEtmClassifierByUdpPortValidity INTEGER
  genEquipEthernetSwitchEtmClassifierByUdpPortRowStatus RowStatus

GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex INTEGER
  genEquipEthernetSwitchEtmClassifierByKnownPduMacAddress OCTET STRING
  genEquipEthernetSwitchEtmClassifierByKnownPduMacCos INTEGER
  genEquipEthernetSwitchEtmClassifierByKnownPduMacColor GreenYellow
  genEquipEthernetSwitchEtmClassifierByKnownPduMacValidity EnableDisable

GenEquipEthernetSwitchEtmClassifierByServiceEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmClassifierByServiceIndex INTEGER
  genEquipEthernetSwitchEtmClassifierByServiceCos INTEGER
  genEquipEthernetSwitchEtmClassifierByServiceColor GreenYellow
  genEquipEthernetSwitchEtmClassifierByServiceUsage EnableDisable

GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex INTEGER
  genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriority INTEGER
  genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDei INTEGER
  genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCos INTEGER
  genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColor GreenYellow

GenEquipEthernetSwitchEtmClassifierByDscpEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmClassifierByDscpValue INTEGER
  genEquipEthernetSwitchEtmClassifierByDscpCos INTEGER
  genEquipEthernetSwitchEtmClassifierByDscpColor GreenYellow

GenEquipEthernetSwitchEtmClassifierByMplsExpEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmClassifierByMplsExpValue INTEGER
  genEquipEthernetSwitchEtmClassifierByMplsExpCos INTEGER
  genEquipEthernetSwitchEtmClassifierByMplsExpColor GreenYellow

GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmClassifierByCosToQueueIndex INTEGER
  genEquipEthernetSwitchEtmClassifierByCosToQueueValue INTEGER

GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex INTEGER
  genEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValue INTEGER

GenEquipEthernetSwitchEtmServiceToPolicerEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmServiceToPolicerIndex INTEGER
  genEquipEthernetSwitchEtmServiceToPolicerValue INTEGER
  genEquipEthernetSwitchEtmServiceToPolicerPerCosOption EnableDisable

GenEquipEthernetSwitchEtmPolicerConfigEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmPolicerConfigIndex INTEGER
  genEquipEthernetSwitchEtmPolicerConfigAdmin EnableDisable
  genEquipEthernetSwitchEtmPolicerConfigColorAware EnableDisable
  genEquipEthernetSwitchEtmPolicerConfigCir INTEGER
  genEquipEthernetSwitchEtmPolicerConfigCbs INTEGER
  genEquipEthernetSwitchEtmPolicerConfigEir INTEGER
  genEquipEthernetSwitchEtmPolicerConfigEbs INTEGER
  genEquipEthernetSwitchEtmPolicerConfigCoupling EnableDisable
  genEquipEthernetSwitchEtmPolicerConfigLineComp INTEGER

GenEquipEthernetSwitchEtmQueuesEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmQueuesIndex INTEGER
  genEquipEthernetSwitchEtmQueuesSize INTEGER

GenEquipEthernetSwitchEtmWredThresholdsEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmWredQueuesIndex INTEGER
  genEquipEthernetSwitchEtmWredThresholdsGreenThLow INTEGER
  genEquipEthernetSwitchEtmWredThresholdsGreenThHigh INTEGER
  genEquipEthernetSwitchEtmWredThresholdsYellowThLow INTEGER
  genEquipEthernetSwitchEtmWredThresholdsYellowThHigh INTEGER
  genEquipEthernetSwitchEtmWredThresholdsGreenMaxDrop INTEGER
  genEquipEthernetSwitchEtmWredThresholdsYellowMaxDrop INTEGER

GenEquipEthernetSwitchEtmMarkerEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmMarkerCoS INTEGER
  genEquipEthernetSwitchEtmMarkerColor INTEGER
  genEquipEthernetSwitchEtmMarkerPbit INTEGER
  genEquipEthernetSwitchEtmMarkerCfi INTEGER

GenEquipEthernetSwitchEtmSchedulerConfigEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmSchedulerConfigQueueIndex INTEGER
  genEquipEthernetSwitchEtmSchedulerConfigPriority INTEGER
  genEquipEthernetSwitchEtmSchedulerConfigWeight INTEGER

GenEquipEthernetSwitchEtmShaperConfigEntry  
SEQUENCE    
  genEquipEthernetSwitchEtmShaperConfigIndex INTEGER
  genEquipEthernetSwitchEtmShaperConfigAdmin INTEGER
  genEquipEthernetSwitchEtmShaperConfigCir INTEGER
  genEquipEthernetSwitchEtmShaperConfigCbs INTEGER
  genEquipEthernetSwitchEtmShaperConfigLineComp INTEGER

GenEquipEthernetSwitchQoSIPPbitsEntry  
SEQUENCE    
  genEquipEthernetSwitchQoSIPPbitsId INTEGER
  genEquipEthernetSwitchQoSIPPbitsQueue QueueName

GenEquipEthernetSwitchQoSVLANPbitsEntry  
SEQUENCE    
  genEquipEthernetSwitchQoSVLANPbitsId INTEGER
  genEquipEthernetSwitchQoSVLANPbitsQueue QueueName

GenEquipEthernetSwitchQoSQueueWeightsEntry  
SEQUENCE    
  genEquipEthernetSwitchQoSQueueWeightsId INTEGER
  genEquipEthernetSwitchQoSQueueWeightsQueue QueueName
  genEquipEthernetSwitchQoSQueueWeightsWeight INTEGER

GenEquipEthernetSwitchQoSPolicerNameEntry  
SEQUENCE    
  genEquipEthernetSwitchQoSPolicerNameId INTEGER
  genEquipEthernetSwitchQoSPolicerNameName DisplayString
  genEquipEthernetSwitchQoSPolicerNameRowStatus RowStatus

GenEquipEthernetSwitchQoSPolicerListEntry  
SEQUENCE    
  genEquipEthernetSwitchQoSPolicerListId INTEGER
  genEquipEthernetSwitchQoSPolicerListName DisplayString
  genEquipEthernetSwitchQoSPolicerListClassName DisplayString
  genEquipEthernetSwitchQoSPolicerListTrafficType INTEGER
  genEquipEthernetSwitchQoSPolicerListCIR INTEGER
  genEquipEthernetSwitchQoSPolicerListCBS INTEGER
  genEquipEthernetSwitchQoSPolicerListRowStatus RowStatus

GenEquipEthernetSwitchQoSStaticMacEntry  
SEQUENCE    
  genEquipEthernetSwitchQoSStaticMacId INTEGER
  genEquipEthernetSwitchQoSStaticMacAddr OCTET STRING
  genEquipEthernetSwitchQoSStaticMacVlanId INTEGER
  genEquipEthernetSwitchQoSStaticMacForwardTo INTEGER
  genEquipEthernetSwitchQoSStaticMacPriority INTEGER
  genEquipEthernetSwitchQoSStaticMacRowStatus RowStatus

GenEquipProtocolsMstpGeneralAttributesEntry  
SEQUENCE    
  genEquipProtocolsMstpGeneralAttributesComponentId INTEGER
  genEquipProtocolsMstpGeneralAttributesMstpEnabled TrueFalse
  genEquipProtocolsMstpGeneralAttributesNumberOfinstances INTEGER
  genEquipProtocolsMstpGeneralAttributesMigrateTime INTEGER
  genEquipProtocolsMstpGeneralAttributesBpduDestinationMAC INTEGER
  genEquipProtocolsMstpGeneralAttributesFrozen TrueFalse
  genEquipProtocolsMstpGeneralAttributesSdHandling INTEGER
  genEquipProtocolsMstpGeneralAttributesReset TrueFalse
  genEquipProtocolsMstpGeneralAttributesResetCounters TrueFalse

GenEquipProtocolsMstpCountersEntry  
SEQUENCE    
  genEquipProtocolsMstpCountersPortId INTEGER
  genEquipProtocolsMstpCountersNumberOfReceivedTCN INTEGER
  genEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpdu INTEGER
  genEquipProtocolsMstpCountersNumberOfReceivedRstBpdu INTEGER
  genEquipProtocolsMstpCountersNumberOfReceivedMstBpdu INTEGER
  genEquipProtocolsMstpCountersNumberOfTransmittedTcnBpdu INTEGER
  genEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpdu INTEGER
  genEquipProtocolsMstpCountersNumberOfTransmittedRstBpdu INTEGER
  genEquipProtocolsMstpCountersNumberOfTransmittedMstBpdu INTEGER

GenEquipProtocolsEoamBwVsmEntry  
SEQUENCE    
  genEquipProtocolsEoamBwVsmName DisplayString
  genEquipProtocolsEoamBwVsmAdmin Dot1CfmInterfaceStatus
  genEquipProtocolsEoamBwVsmPeriod INTEGER
  genEquipProtocolsEoamBwVsmCurrentBw INTEGER
  genEquipProtocolsEoamBwVsmControlIfindex INTEGER
  genEquipProtocolsEoamBwVsmId INTEGER
  genEquipProtocolsEoamBwVsmMonitoredIfindex INTEGER
  genEquipProtocolsEoamBwVsmHoldoff INTEGER
  genEquipProtocolsEoamBwVsmHoldoffStartTime INTEGER
  genEquipProtocolsEoamBwVsmHoldoffState INTEGER
  genEquipProtocolsEoamBwVsmLastSentMsg OCTET STRING
  genEquipProtocolsEoamBwVsmMel INTEGER
  genEquipProtocolsEoamBwVsmMonitoringInterval INTEGER
  genEquipProtocolsEoamBwVsmNominalBw INTEGER
  genEquipProtocolsEoamBwVsmTxMsgCounter INTEGER
  genEquipProtocolsEoamBwVsmVersion INTEGER
  genEquipProtocolsEoamBwVsmVlan INTEGER
  genEquipProtocolsEoamBwVsmResetMsgCounter OffOn
  genEquipProtocolsEoamBwVsmRowStatus RowStatus

GenEquipProtocolsG8032ErpiAttributesEntry  
SEQUENCE    
  genEquipProtocolsG8032ErpiAttributesErpiId INTEGER
  genEquipProtocolsG8032ErpiAttributesErpiName DisplayString
  genEquipProtocolsG8032ErpiAttributesGuardTime INTEGER
  genEquipProtocolsG8032ErpiAttributesHoldoffTime INTEGER
  genEquipProtocolsG8032ErpiAttributesLastChangeTs INTEGER
  genEquipProtocolsG8032ErpiAttributesLastHpRequest G8032LastState
  genEquipProtocolsG8032ErpiAttributesLastLocalState G8032LastState
  genEquipProtocolsG8032ErpiAttributesLastRemoteState G8032LastState
  genEquipProtocolsG8032ErpiAttributesMegLevel INTEGER
  genEquipProtocolsG8032ErpiAttributesDownMep INTEGER
  genEquipProtocolsG8032ErpiAttributesRevertive IfMgrTrueFalse
  genEquipProtocolsG8032ErpiAttributesRingState INTEGER
  genEquipProtocolsG8032ErpiAttributesRplOwner INTEGER
  genEquipProtocolsG8032ErpiAttributesSdHandling IfMgrTrueFalse
  genEquipProtocolsG8032ErpiAttributesServiceId INTEGER
  genEquipProtocolsG8032ErpiAttributesErpiType INTEGER
  genEquipProtocolsG8032ErpiAttributesVersion INTEGER
  genEquipProtocolsG8032ErpiAttributesVirtualChannel INTEGER
  genEquipProtocolsG8032ErpiAttributesWtr INTEGER
  genEquipProtocolsG8032ErpiAttributesRowStatus RowStatus

GenEquipProtocolsG8032ErpiPortAttributesEntry  
SEQUENCE    
  genEquipProtocolsG8032ErpiPortAttributesErpiId INTEGER
  genEquipProtocolsG8032ErpiPortAttributesErpiIfindex INTEGER
  genEquipProtocolsG8032ErpiPortAttributesActiveState IfMgrTrueFalse
  genEquipProtocolsG8032ErpiPortAttributesDataFwdState IfMgrTrueFalse
  genEquipProtocolsG8032ErpiPortAttributesDefectState INTEGER
  genEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdState IfMgrTrueFalse
  genEquipProtocolsG8032ErpiPortAttributesRplLinkBlockState IfMgrTrueFalse
  genEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFrames INTEGER
  genEquipProtocolsG8032ErpiPortAttributesRxRapsEvents INTEGER
  genEquipProtocolsG8032ErpiPortAttributesRxRapsFrames INTEGER
  genEquipProtocolsG8032ErpiPortAttributesFs INTEGER
  genEquipProtocolsG8032ErpiPortAttributesMs INTEGER
  genEquipProtocolsG8032ErpiPortAttributesNr INTEGER
  genEquipProtocolsG8032ErpiPortAttributesRb INTEGER
  genEquipProtocolsG8032ErpiPortAttributesSd INTEGER
  genEquipProtocolsG8032ErpiPortAttributesSf INTEGER
  genEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThreshold INTEGER
  genEquipProtocolsG8032ErpiPortAttributesSpId INTEGER
  genEquipProtocolsG8032ErpiPortAttributesTxRapsCntrol IfMgrTrueFalse
  genEquipProtocolsG8032ErpiPortAttributesTxRapsEvents INTEGER
  genEquipProtocolsG8032ErpiPortAttributesTxRapsFrames INTEGER
  genEquipProtocolsG8032ErpiPortAttributesTxRapsFs INTEGER
  genEquipProtocolsG8032ErpiPortAttributesTxRapsMs INTEGER
  genEquipProtocolsG8032ErpiPortAttributesTxRapsNr INTEGER
  genEquipProtocolsG8032ErpiPortAttributesTxRapsRb INTEGER
  genEquipProtocolsG8032ErpiPortAttributesTxRapsSd INTEGER
  genEquipProtocolsG8032ErpiPortAttributesTxRapsSf INTEGER
  genEquipProtocolsG8032ErpiPortAttributesClearCommand INTEGER
  genEquipProtocolsG8032ErpiPortAttributesRowStatus RowStatus
  genEquipProtocolsG8032ErpiPortAttributesFsCommand INTEGER
  genEquipProtocolsG8032ErpiPortAttributesMsCommand INTEGER

GenEquipProtocolsSoamMepEntry  
SEQUENCE    
  genEquipProtocolsSoamMepMdIndex INTEGER
  genEquipProtocolsSoamMepMaIndex INTEGER
  genEquipProtocolsSoamMepMepIndentifier INTEGER
  genEquipProtocolsSoamMepSpId INTEGER
  genEquipProtocolsSoamMepLastSessionLbmOut INTEGER
  genEquipProtocolsSoamMepLastSessionlbmToSend INTEGER
  genEquipProtocolsSoamMepLastSessionLbrIn INTEGER
  genEquipProtocolsSoamMepLastSessionlbState LBState
  genEquipProtocolsSoamMepLbmOut INTEGER

GenEquipProtocolsSoamMegEntry  
SEQUENCE    
  genEquipProtocolsSoamMegMdIndex INTEGER
  genEquipProtocolsSoamMegMaIndex INTEGER
  genEquipProtocolsSoamMegServiceId INTEGER

GenEquipTdmTrailsEntry  
SEQUENCE    
  genEquipTdmTrailID DisplayString
  genEquipTdmTrailDescr DisplayString
  genEquipTdmTrailProtected INTEGER
  genEquipTdmTrailAcmPrio INTEGER
  genEquipTdmTrailOperStatus INTEGER
  genEquipTdmTrailAlarmStatus INTEGER
  genEquipTdmTrailSrcSlot INTEGER
  genEquipTdmTrailSrcType TrailIfType
  genEquipTdmTrailSrcNum INTEGER
  genEquipTdmTrailDest1Slot INTEGER
  genEquipTdmTrailDest1Type TrailIfType
  genEquipTdmTrailDest1Num INTEGER
  genEquipTdmTrailDest2Slot INTEGER
  genEquipTdmTrailDest2Type TrailIfType
  genEquipTdmTrailDest2Num INTEGER
  genEquipTdmTrailProtectedForceActive TrailProtectedType
  genEquipTdmTrailProtectedActiveTrail TrailProtectedType
  genEquipTdmTrailProtectedNumOfSwitches INTEGER
  genEquipTdmTrailPrimaryPathAlarmStatus INTEGER
  genEquipTdmTrailSecondaryPathAlarmStatus INTEGER
  genEquipTdmTrailRowStatus RowStatus

GenEquipSynchronizationSrcEntry  
SEQUENCE    
  genEquipSynchronizationSrcPriority INTEGER
  genEquipSynchronizationSrcSlot INTEGER
  genEquipSynchronizationSrcType INTEGER
  genEquipSynchronizationSrcNum INTEGER
  genEquipSynchronizationSrcValid INTEGER
  genEquipSynchronizationSrcTrail EnableDisable
  genEquipSynchronizationSrcAdmin EnableDisable
  genEquipSynchronizationSrcQuality INTEGER
  genEquipSynchronizationSrcReceivedSSM INTEGER
  genEquipSynchronizationSrcQualityStatus INTEGER

GenEquipServicesPWBundlesEntry  
SEQUENCE    
  genEquipServicesPWBundlesBundleId INTEGER
  genEquipServicesPWBundlesDs0List INTEGER
  genEquipServicesPWBundlesRowStatus RowStatus

GenEquipServicesPWBundlesDescriptionEntry  
SEQUENCE    
  genEquipServicesPWBundlesDescriptionBundleId INTEGER
  genEquipServicesPWBundlesDescriptionBundleDesc DisplayString
  genEquipServicesPWBundlesDescriptionBundleAdmin EnableDisable
  genEquipServicesPWBundlesDescriptionBundleOperStatus INTEGER
  genEquipServicesPWBundlesDescriptionBundleTdmPort INTEGER
  genEquipServicesPWBundlesDescriptionRowStatus RowStatus

GenEquipServicesPWPSNTunnelsEntry  
SEQUENCE    
  genEquipServicesPWPSNTunnelsSlotNumber INTEGER
  genEquipServicesPWPSNTunnelsTunnelId INTEGER
  genEquipServicesPWPSNTunnelsPsnType INTEGER
  genEquipServicesPWPSNTunnelsSVid INTEGER
  genEquipServicesPWPSNTunnelsCVid EnableDisable
  genEquipServicesPWPSNTunnelsPBits INTEGER
  genEquipServicesPWPSNTunnelsDestIpAddr IpAddress
  genEquipServicesPWPSNTunnelsDestIpSubnet IpAddress
  genEquipServicesPWPSNTunnelsNextHopIp IpAddress
  genEquipServicesPWPSNTunnelsTosDscp INTEGER
  genEquipServicesPWPSNTunnelsRemoteMacAddr OCTET STRING
  genEquipServicesPWPSNTunnelsSourceIpAddr IpAddress
  genEquipServicesPWPSNTunnelsSourceMacAddr OCTET STRING
  genEquipServicesPWPSNTunnelsStatus DownUp
  genEquipServicesPWPSNTunnelsSourceMPLSLabel INTEGER
  genEquipServicesPWPSNTunnelsDestinationMPLSLabel INTEGER
  genEquipServicesPWPSNTunnelsMPLSexp INTEGER
  genEquipServicesPWPSNTunnelsVlanType PWTunnelVlanType
  genEquipServicesPWPSNTunnelsVid INTEGER
  genEquipServicesPWPSNTunnelsMAid INTEGER
  genEquipServicesPWPSNTunnelsRowStatus RowStatus

GenEquipServicesPWProfilesEntry  
SEQUENCE    
  genEquipServicesPWProfilesPWProfileId INTEGER
  genEquipServicesPWProfilesPayloadSize INTEGER
  genEquipServicesPWProfilesJitterBufferDepth INTEGER
  genEquipServicesPWProfilesLopsDetection EnableDisable
  genEquipServicesPWProfilesRtpHeaderUsed NoYes
  genEquipServicesPWProfilesRtpTimestampMode PWRtpTimeStampMode
  genEquipServicesPWProfilesRtpTimestampAbsFactor INTEGER
  genEquipServicesPWProfilesPayloadSuppression EnableDisable
  genEquipServicesPWProfilesPayloadType INTEGER
  genEquipServicesPWProfilesConseqPacketsInSync INTEGER
  genEquipServicesPWProfilesConseqMissPktsOutSync INTEGER
  genEquipServicesPWProfilesPktLossTimeWindow INTEGER
  genEquipServicesPWProfilesExcessivePktLossThresh INTEGER
  genEquipServicesPWProfilesAlarmThresh INTEGER
  genEquipServicesPWProfilesClearAlarmThresh INTEGER
  genEquipServicesPWProfilesMissingPktsToSes INTEGER
  genEquipServicesPWProfilesDs0Filler INTEGER
  genEquipServicesPWProfilesCasAlarmPattern INTEGER
  genEquipServicesPWProfilesRowStatus RowStatus

GenEquipServicesPWServiceEntry  
SEQUENCE    
  genEquipServicesPWServicePWId INTEGER
  genEquipServicesPWServicePWType INTEGER
  genEquipServicesPWServicePsnType INTEGER
  genEquipServicesPWServiceTdmPort INTEGER
  genEquipServicesPWServiceDs0bundle INTEGER
  genEquipServicesPWServiceTdmProfileId INTEGER
  genEquipServicesPWServicePsnTunnelProtection EnableDisable
  genEquipServicesPWServicePsnTunnelOrGroupId INTEGER
  genEquipServicesPWServiceSrcUdpPortOrEcid INTEGER
  genEquipServicesPWServiceDstUdpPortOrEcid INTEGER
  genEquipServicesPWServiceAdmin EnableDisable
  genEquipServicesPWServiceCrReference EnableDisable
  genEquipServicesPWServiceOperStatus EnableDisable
  genEquipServicesPWServiceRowStatus RowStatus

GenEquipServicesNGPWBundlesEntry  
SEQUENCE    
  genEquipServicesNGPWBundlesSlotId INTEGER
  genEquipServicesNGPWBundlesTdmPort INTEGER
  genEquipServicesNGPWBundlesDs0List INTEGER
  genEquipServicesNGPWBundlesIfIndex INTEGER
  genEquipServicesNGPWBundlesBundleId INTEGER
  genEquipServicesNGPWBundlesRowStatus RowStatus

GenEquipServicesNGPWBundlesDescriptionEntry  
SEQUENCE    
  genEquipServicesNGPWBundlesDescriptionSlotId INTEGER
  genEquipServicesNGPWBundlesDescriptionBundleId INTEGER
  genEquipServicesNGPWBundlesDescriptionAdmin EnableDisableSMI2
  genEquipServicesNGPWBundlesDescriptionBundleDesc DisplayString
  genEquipServicesNGPWBundlesDescriptionRowStatus RowStatus

GenEquipServicesNGPWProfilesEntry  
SEQUENCE    
  genEquipServicesNGPWProfilesPWProfileId INTEGER
  genEquipServicesNGPWProfilesPayloadSize INTEGER
  genEquipServicesNGPWProfilesJitterBufferDepth INTEGER
  genEquipServicesNGPWProfilesPayloadSuppression EnableDisableSMI2
  genEquipServicesNGPWProfilesPayloadType INTEGER
  genEquipServicesNGPWProfilesDs0Filler INTEGER
  genEquipServicesNGPWProfilesCasAlarmPattern INTEGER
  genEquipServicesNGPWProfilesRtpHeaderUsed EnableDisableSMI2
  genEquipServicesNGPWProfilesRtpTimestampMode PWRtpTimeStampMode
  genEquipServicesNGPWProfilesRtpTimestampAbsFactor INTEGER
  genEquipServicesNGPWProfilesLopsDetection EnableDisableSMI2
  genEquipServicesNGPWProfilesConseqPacketsInSync INTEGER
  genEquipServicesNGPWProfilesConseqMissPktsOutSync INTEGER
  genEquipServicesNGPWProfilesPktLossTimeWindow INTEGER
  genEquipServicesNGPWProfilesExcessivePktLossThresh INTEGER
  genEquipServicesNGPWProfilesAlarmThresh INTEGER
  genEquipServicesNGPWProfilesClearAlarmThresh INTEGER
  genEquipServicesNGPWProfilesMissingPktsToSes INTEGER
  genEquipServicesNGPWProfilesRowStatus RowStatus

GenEquipServicesNGPWPSNTunnelsEntry  
SEQUENCE    
  genEquipServicesNGPWPSNTunnelsSlotID INTEGER
  genEquipServicesNGPWPSNTunnelsTunnelId INTEGER
  genEquipServicesNGPWPSNTunnelsAdmin EnableDisableSMI2
  genEquipServicesNGPWPSNTunnelsPsnType PWTunnelPsnType
  genEquipServicesNGPWPSNTunnelsDestIpAddr IpAddress
  genEquipServicesNGPWPSNTunnelsNextHopIp IpAddress
  genEquipServicesNGPWPSNTunnelsTosDscp INTEGER
  genEquipServicesNGPWPSNTunnelsRemoteMacAddr OCTET STRING
  genEquipServicesNGPWPSNTunnelsSourceMPLSLabel INTEGER
  genEquipServicesNGPWPSNTunnelsDestinationMPLSLabel INTEGER
  genEquipServicesNGPWPSNTunnelsMPLSexp INTEGER
  genEquipServicesNGPWPSNTunnelsVlanType PWTunnelVlanType
  genEquipServicesNGPWPSNTunnelsVid INTEGER
  genEquipServicesNGPWPSNTunnelsPBits INTEGER
  genEquipServicesNGPWPSNTunnelsMaId INTEGER
  genEquipServicesNGPWPSNTunnelsTDMDefectPropagation EnableDisableSMI2
  genEquipServicesNGPWPSNTunnelsRowStatus RowStatus

GenEquipServicesNGPWServiceEntry  
SEQUENCE    
  genEquipServicesNGPWServiceSlotID INTEGER
  genEquipServicesNGPWServicePWId INTEGER
  genEquipServicesNGPWServiceAdmin EnableDisableSMI2
  genEquipServicesNGPWServicePWType INTEGER
  genEquipServicesNGPWServicePsnType PWTunnelPsnType
  genEquipServicesNGPWServiceDs0bundle INTEGER
  genEquipServicesNGPWServiceTdmProfileId INTEGER
  genEquipServicesNGPWServiceTunnel INTEGER
  genEquipServicesNGPWServiceCrReference NoYes
  genEquipServicesNGPWServiceSrcPsnId INTEGER
  genEquipServicesNGPWServiceDstPsnId INTEGER
  genEquipServicesNGPWServicePsnTunnelProtection INTEGER
  genEquipServicesNGPWServiceRowStatus RowStatus

GenEquipServicesNGPWTDMPortsEntry  
SEQUENCE    
  genEquipServicesNGPWTDMPortsSlotID INTEGER
  genEquipServicesNGPWTDMPortsPort INTEGER
  genEquipServicesNGPWTDMPortsIfIndex INTEGER
  genEquipServicesNGPWTDMPortsAdmin EnableDisableSMI2
  genEquipServicesNGPWTDMPortsLineType INTEGER
  genEquipServicesNGPWTDMPortsLineCoding INTEGER
  genEquipServicesNGPWTDMPortsChannelization EnableDisableSMI2
  genEquipServicesNGPWTDMPortsTimingMode INTEGER
  genEquipServicesNGPWTDMPortsClockSourceRef INTEGER
  genEquipServicesNGPWTDMPortsClkSrcRefPort INTEGER
  genEquipServicesNGPWTDMPortsIdleCode INTEGER
  genEquipServicesNGPWTDMPortsCableLength INTEGER
  genEquipServicesNGPWTDMPortsLoopback TDMLoopbackType

GenEquipServicesNGPWPSNTunnelsStatusEntry  
SEQUENCE    
  genEquipServicesNGPWPSNTunnelsStatusSlotID INTEGER
  genEquipServicesNGPWPSNTunnelsStatusTunnelId INTEGER
  genEquipServicesNGPWPSNTunnelsStatusOperStatus DownUp
  genEquipServicesNGPWPSNTunnelsStatusSourceIpAddr IpAddress
  genEquipServicesNGPWPSNTunnelsStatusSourceMacAddr OCTET STRING
  genEquipServicesNGPWPSNTunnelsStatusRemoteMacAddr OCTET STRING

GenEquipServicesNGPWServiceStatusEntry  
SEQUENCE    
  genEquipServicesNGPWServiceStatusSlotID INTEGER
  genEquipServicesNGPWServiceStatusID INTEGER
  genEquipServicesNGPWServiceStatusOperStatus DownUp
  genEquipServicesNGPWServiceStatusClearStats NoYes
  genEquipServicesNGPWServiceStatusTxPkts Counter64
  genEquipServicesNGPWServiceStatusReceivedPkts Counter64
  genEquipServicesNGPWServiceStatusTransitionsLOPS Counter64
  genEquipServicesNGPWServiceStatusJitterBufferOverruns Counter64
  genEquipServicesNGPWServiceStatusBufferDeviations Counter64
  genEquipServicesNGPWServiceStatusMinJitterCount Counter64
  genEquipServicesNGPWServiceStatusMaxJitterCount Counter64

GenEquipServicesNGPWTDMPortsStatusEntry  
SEQUENCE    
  genEquipServicesNGPWTDMPortsStatusSlotID INTEGER
  genEquipServicesNGPWTDMPortsStatusPort INTEGER
  genEquipServicesNGPWTDMPortsStatusIfIndex INTEGER
  genEquipServicesNGPWTDMPortsStatusOperStatus DownUp
  genEquipServicesNGPWTDMPortsStatusLoopbackCounter INTEGER
  genEquipServicesNGPWTDMPortsStatusActualLoopback INTEGER
  genEquipServicesNGPWTDMPortsStatusLineStatus INTEGER
  genEquipServicesNGPWTDMPortsStatusLoopback TDMLoopbackType

GenEquipServicesNGPWBundlesStatusEntry  
SEQUENCE    
  genEquipServicesNGPWBundlesStatusSlotID INTEGER
  genEquipServicesNGPWBundlesStatusBundleId INTEGER
  genEquipServicesNGPWBundlesStatusOperStatus DownUp

GenEquipServicesNGPWPSNTunnelGroupEntry  
SEQUENCE    
  genEquipServicesNGPWPSNTunnelGroupSlot INTEGER
  genEquipServicesNGPWPSNTunnelGroupId INTEGER
  genEquipServicesNGPWPSNTunnelGroupPrimaryId INTEGER
  genEquipServicesNGPWPSNTunnelGroupSecondaryId INTEGER
  genEquipServicesNGPWPSNTunnelGroupAdmin EnableDisableSMI2
  genEquipServicesNGPWPSNTunnelGroupRevertive EnableDisableSMI2
  genEquipServicesNGPWPSNTunnelGroupProtectionMode EnableDisableSMI2
  genEquipServicesNGPWPSNTunnelGroupRowStatus RowStatus

GenEquipServicesNGPWPSNTunnelGroupStatusEntry  
SEQUENCE    
  genEquipServicesNGPWPSNTunnelGroupStatusSlot INTEGER
  genEquipServicesNGPWPSNTunnelGroupStatusId INTEGER
  genEquipServicesNGPWPSNTunnelGroupStatusOperStatus DownUp
  genEquipServicesNGPWPSNTunnelGroupStatusProtectionCommand TunnelGroupProtectionCmd
  genEquipServicesNGPWPSNTunnelGroupStatusProtectionSwitches INTEGER
  genEquipServicesNGPWPSNTunnelGroupStatusActiveTunnel INTEGER
  genEquipServicesNGPWPSNTunnelGroupStatusClearStats OffOn
  genEquipServicesNGPWPSNTunnelGroupStatusRevertiveCountdown INTEGER

GenEquipServicesNGPWSOAMMDEntry  
SEQUENCE    
  genEquipServicesNGPWSOAMMDSlot INTEGER
  genEquipServicesNGPWSOAMMDId INTEGER
  genEquipServicesNGPWSOAMMDName DisplayString
  genEquipServicesNGPWSOAMMDLevel INTEGER
  genEquipServicesNGPWSOAMMDRowStatus RowStatus

GenEquipServicesNGPWSOAMMAEntry  
SEQUENCE    
  genEquipServicesNGPWSOAMMASlot INTEGER
  genEquipServicesNGPWSOAMMAId INTEGER
  genEquipServicesNGPWSOAMMAName DisplayString
  genEquipServicesNGPWSOAMMAMdId INTEGER
  genEquipServicesNGPWSOAMMALocalMepId INTEGER
  genEquipServicesNGPWSOAMMARemoteMepId INTEGER
  genEquipServicesNGPWSOAMMAVid INTEGER
  genEquipServicesNGPWSOAMMAVlanType PWTunnelVlanType
  genEquipServicesNGPWSOAMMACCMAdmin EnableDisableSMI2
  genEquipServicesNGPWSOAMMACCMInterval PWSOAMccmInterval
  genEquipServicesNGPWSOAMMACCMLTMPriority INTEGER
  genEquipServicesNGPWSOAMMARowStatus RowStatus

GenEquipServicesNGPWSOAMMAStatusEntry  
SEQUENCE    
  genEquipServicesNGPWSOAMMAStatusSlot INTEGER
  genEquipServicesNGPWSOAMMAStatusId INTEGER
  genEquipServicesNGPWSOAMMAStatusRemoteMepMACAddr MacAddress
  genEquipServicesNGPWSOAMMAStatusDefects INTEGER

GenEquipServicesPWPSNTunnelGroupsEntry  
SEQUENCE    
  genEquipServicesPWPSNTunnelGroupsTunnelGroupID INTEGER
  genEquipServicesPWPSNTunnelGroupsTunnelIDPrimary INTEGER
  genEquipServicesPWPSNTunnelGroupsTunnelIDSecondary INTEGER
  genEquipServicesPWPSNTunnelGroupsSwitchToStandby OffOn
  genEquipServicesPWPSNTunnelGroupsRowStatus RowStatus

GenEquipServicesPWPSNTunnelGroupStatusEntry  
SEQUENCE    
  genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID INTEGER
  genEquipServicesPWPSNTunnelGroupStatusCurrActiveTunnel INTEGER
  genEquipServicesPWPSNTunnelGroupStatusNumProtSwitches INTEGER

GenEquipServicesPWSOAMMDEntry  
SEQUENCE    
  genEquipServicesPWSOAMMDDomainID INTEGER
  genEquipServicesPWSOAMMDDomainName DisplayString
  genEquipServicesPWSOAMMDDomainLevel INTEGER
  genEquipServicesPWSOAMMDRowStatus RowStatus

GenEquipServicesPWSOAMMAEntry  
SEQUENCE    
  genEquipServicesPWSOAMMALocalID INTEGER
  genEquipServicesPWSOAMMALocalName DisplayString
  genEquipServicesPWSOAMMADomainID INTEGER
  genEquipServicesPWSOAMMAAdmin EnableDisable
  genEquipServicesPWSOAMMALocalMEP INTEGER
  genEquipServicesPWSOAMMARemoteMEP INTEGER
  genEquipServicesPWSOAMMAVlanType INTEGER
  genEquipServicesPWSOAMMAVlanID INTEGER
  genEquipServicesPWSOAMMACCMInterval INTEGER
  genEquipServicesPWSOAMMACCMAdmin EnableDisable
  genEquipServicesPWSOAMMACCMPriority INTEGER
  genEquipServicesPWSOAMMARemoteMEPAddr OCTET STRING
  genEquipServicesPWSOAMMADefects INTEGER
  genEquipServicesPWSOAMMARowStatus RowStatus

GenEquipServicesCetConfigEntry  
SEQUENCE    
  genEquipServicesCetConfigIndex INTEGER
  genEquipServicesCetConfigType ServiceType
  genEquipServicesCetConfigAdmin ServiceAdmin
  genEquipServicesCetConfigMacTableSize INTEGER
  genEquipServicesCetConfigDefaultCos INTEGER
  genEquipServicesCetConfigCosMode ServiceCosMode
  genEquipServicesCetConfigEvcId DisplayString
  genEquipServicesCetConfigEvcDescription DisplayString
  genEquipServicesCetConfigSplitHorizon EnableDisable
  genEquipServicesCetConfigResiliencyProtocolInstance INTEGER
  genEquipServicesCetConfigProtectingTrail INTEGER
  genEquipServicesCetConfigProtectingTrailIndex INTEGER
  genEquipServicesCetConfigServiceSubType ServiceSubType
  genEquipServicesCetConfigTrailIndex INTEGER
  genEquipServicesCetConfigRowStatus RowStatus

GenEquipServicesCetStatusEntry  
SEQUENCE    
  genEquipServicesCetStatusIndex INTEGER
  genEquipServicesCetStatusMulticast EnableDisable

GenEquipServicesCetSpConfigEntry  
SEQUENCE    
  genEquipServicesCetSpConfigServiceIndex INTEGER
  genEquipServicesCetSpConfigServicePointIndex INTEGER
  genEquipServicesCetSpConfigSpType SPType
  genEquipServicesCetSpConfigSpSubtype SPSubType
  genEquipServicesCetSpConfigSpName DisplayString
  genEquipServicesCetSpConfigIfIndex INTEGER
  genEquipServicesCetSpConfigSvlanEncap INTEGER
  genEquipServicesCetSpConfigCvlanEncap INTEGER
  genEquipServicesCetSpConfigLearning EnableDisable
  genEquipServicesCetSpConfigFlooding DisableAllowed
  genEquipServicesCetSpConfigBroadcast DisableAllowed
  genEquipServicesCetSpConfigCosMode SPCosMode
  genEquipServicesCetSpConfigDefCos INTEGER
  genEquipServicesCetSpConfigPclProfileId INTEGER
  genEquipServicesCetSpConfigPclAdmin EnableDisable
  genEquipServicesCetSpConfigMonitorCounterGroup INTEGER
  genEquipServicesCetSpConfigSplitHorizon SplitHorizonGroup
  genEquipServicesCetSpConfigSvlanEgressPreserve EnableDisable
  genEquipServicesCetSpConfigSvlanCosPreserve EnableDisable
  genEquipServicesCetSpConfigCvlanEgressPreserve EnableDisable
  genEquipServicesCetSpConfigCvlanCosPreserve EnableDisable
  genEquipServicesCetSpConfigMarkingMode EnableDisable
  genEquipServicesCetSpConfigServiceClassId INTEGER
  genEquipServicesCetSpConfigTcamClassification INTEGER
  genEquipServicesCetSpConfigRowStatus RowStatus

GenEquipServicesCetSpPolicerAssociationEntry  
SEQUENCE    
  genEquipServicesCetSpPolicerAssociationServiceIndex INTEGER
  genEquipServicesCetSpPolicerAssociationSpIndex INTEGER
  genEquipServicesCetSpPolicerAssociationSpPolicerAdmin EnableDisable
  genEquipServicesCetSpPolicerAssociationCos0Profile INTEGER
  genEquipServicesCetSpPolicerAssociationCos0Admin EnableDisable
  genEquipServicesCetSpPolicerAssociationCos1Profile INTEGER
  genEquipServicesCetSpPolicerAssociationCos1Admin EnableDisable
  genEquipServicesCetSpPolicerAssociationCos2Profile INTEGER
  genEquipServicesCetSpPolicerAssociationCos2Admin INTEGER
  genEquipServicesCetSpPolicerAssociationCos3Profile INTEGER
  genEquipServicesCetSpPolicerAssociationCos3Admin DisableAllowed
  genEquipServicesCetSpPolicerAssociationCos4Profile INTEGER
  genEquipServicesCetSpPolicerAssociationCos4Admin EnableDisable
  genEquipServicesCetSpPolicerAssociationCos5Profile INTEGER
  genEquipServicesCetSpPolicerAssociationCos5Admin EnableDisable
  genEquipServicesCetSpPolicerAssociationCos6Profile INTEGER
  genEquipServicesCetSpPolicerAssociationCos6Admin EnableDisable
  genEquipServicesCetSpPolicerAssociationCos7Profile INTEGER
  genEquipServicesCetSpPolicerAssociationCos7Admin EnableDisable
  genEquipServicesCetSpPolicerAssociationRowStatus RowStatus

GenEquipServicesCetSpVlanMappingEntry  
SEQUENCE    
  genEquipServicesCetSpVlanMappingServiceId INTEGER
  genEquipServicesCetSpVlanMappingSpId INTEGER
  genEquipServicesCetSpVlanMappingSvlanIndex INTEGER
  genEquipServicesCetSpVlanMappingCvlanIndex INTEGER
  genEquipServicesCetSpVlanMappingVlanCosOverride TrueFalse
  genEquipServicesCetSpVlanMappingVlanDefCos INTEGER
  genEquipServicesCetSpVlanMappingColor GreenYellow
  genEquipServicesCetSpVlanMappingIfIndex INTEGER
  genEquipServicesCetSpVlanMappingIfSlotIndex INTEGER
  genEquipServicesCetSpVlanMappingIfPortIndex INTEGER
  genEquipServicesCetSpVlanMappingRowStatus RowStatus

GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry  
SEQUENCE    
  genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex INTEGER
  genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsClearOnRead NoYes

GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry  
SEQUENCE    
  genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex INTEGER
  genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex INTEGER
  genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsClearOnRead NoYes

GenEquipTmMappingSVlanPriToCosEntry  
SEQUENCE    
  genEquipTmMappingSVlanPriToCosUpIndex INTEGER
  genEquipTmMappingSVlanPriToCosDeiIndex INTEGER
  genEquipTmMappingSVlanPriToCosCos INTEGER
  genEquipTmMappingSVlanPriToCosColor GreenYellow

GenEquipTmMappingCVlanPriToCosEntry  
SEQUENCE    
  genEquipTmMappingCVlanPriToCosUpIndex INTEGER
  genEquipTmMappingCVlanPriToCosCfiIndex INTEGER
  genEquipTmMappingCVlanPriToCosCos INTEGER
  genEquipTmMappingCVlanPriToCosColor GreenYellow

GenEquipTmMappingDscpToCosEntry  
SEQUENCE    
  genEquipTmMappingDscpToCosDscpIndex INTEGER
  genEquipTmMappingDscpToCosBinary OCTET STRING
  genEquipTmMappingDscpToCosDescription DisplayString
  genEquipTmMappingDscpToCosCos INTEGER
  genEquipTmMappingDscpToCosColor GreenYellow

GenEquipTmMappingMPLSExpPriToCosEntry  
SEQUENCE    
  genEquipTmMappingMPLSExpPriToCosMplsExpIndex INTEGER
  genEquipTmMappingMPLSExpPriToCosCos INTEGER
  genEquipTmMappingMPLSExpPriToCosColor GreenYellow

GenEquipTmMarkingSVlanPriEntry  
SEQUENCE    
  genEquipTmMarkingSVlanPriCosIndex INTEGER
  genEquipTmMarkingSVlanPriColorIndex GreenYellow
  genEquipTmMarkingSVlanPriUserPriority INTEGER
  genEquipTmMarkingSVlanPriDEI INTEGER

GenEquipTmMarkingCVlanPriEntry  
SEQUENCE    
  genEquipTmMarkingCVlanPriCosIndex INTEGER
  genEquipTmMarkingCVlanPriColorIndex GreenYellow
  genEquipTmMarkingCVlanPriUserPriority INTEGER
  genEquipTmMarkingCVlanPriCFI INTEGER

GenEquipProfilesPolicerEntry  
SEQUENCE    
  genEquipProfilesPolicerIndex INTEGER
  genEquipProfilesPolicerDescription DisplayString
  genEquipProfilesPolicerPolicerType PolicerType
  genEquipProfilesPolicerCir INTEGER
  genEquipProfilesPolicerCbs INTEGER
  genEquipProfilesPolicerEir INTEGER
  genEquipProfilesPolicerEbs INTEGER
  genEquipProfilesPolicerColorMode PolicerColorMode
  genEquipProfilesPolicerCouplingFlagMode EnableDisable
  genEquipProfilesPolicerDataPlaneId INTEGER
  genEquipProfilesPolicerRowStatus RowStatus

GenEquipProfilesL4WredEntry  
SEQUENCE    
  genEquipProfilesL4WredIndex INTEGER
  genEquipProfilesL4WredGreenMinThreshold INTEGER
  genEquipProfilesL4WredGreenMaxThreshold INTEGER
  genEquipProfilesL4WredGreenMaxDrop INTEGER
  genEquipProfilesL4WredYellowMinThreshold INTEGER
  genEquipProfilesL4WredYellowMaxThreshold INTEGER
  genEquipProfilesL4WredYellowMaxDrop INTEGER
  genEquipProfilesL4WredYellowRowStatus RowStatus

GenEquipProfilesSchedulerCoSPriEntry  
SEQUENCE    
  genEquipProfilesSchedulerCoSPriIndex INTEGER
  genEquipProfilesSchedulerCoSPriCos0Description DisplayString
  genEquipProfilesSchedulerCoSPriGreenCos0Priority INTEGER
  genEquipProfilesSchedulerCoSPriCos1description DisplayString
  genEquipProfilesSchedulerCoSPriGreenCos1Priority INTEGER
  genEquipProfilesSchedulerCoSPriCos2Description DisplayString
  genEquipProfilesSchedulerCoSPriGreenCos2Priority INTEGER
  genEquipProfilesSchedulerCoSPriCos3description DisplayString
  genEquipProfilesSchedulerCoSPriGreenCos3Priority INTEGER
  genEquipProfilesSchedulerCoSPriCos4description DisplayString
  genEquipProfilesSchedulerCoSPriGreenCos4Priority INTEGER
  genEquipProfilesSchedulerCoSPriCos5description DisplayString
  genEquipProfilesSchedulerCoSPriGreenCos5Priority INTEGER
  genEquipProfilesSchedulerCoSPriCos6description DisplayString
  genEquipProfilesSchedulerCoSPriGreenCos6Priority INTEGER
  genEquipProfilesSchedulerCoSPriCos7description DisplayString
  genEquipProfilesSchedulerCoSPriGreenCos7Priority INTEGER
  genEquipProfilesSchedulerCoSPriRowStatus RowStatus

GenEquipProfilesSchedulerWfqEntry  
SEQUENCE    
  genEquipProfilesSchedulerWfqIndex INTEGER
  genEquipProfilesSchedulerWfqCos0Weight INTEGER
  genEquipProfilesSchedulerWfqCos1Weight INTEGER
  genEquipProfilesSchedulerWfqCos2Weight INTEGER
  genEquipProfilesSchedulerWfqCos3Weight INTEGER
  genEquipProfilesSchedulerWfqCos4Weight INTEGER
  genEquipProfilesSchedulerWfqCos5Weight INTEGER
  genEquipProfilesSchedulerWfqCos6Weight INTEGER
  genEquipProfilesSchedulerWfqCos7Weight INTEGER
  genEquipProfilesSchedulerWfqRowStatus RowStatus

GenEquipProfilesL2ShaperEntry  
SEQUENCE    
  genEquipProfilesL2ShaperIndex INTEGER
  genEquipProfilesL2ShaperDescription DisplayString
  genEquipProfilesL2ShaperCir INTEGER
  genEquipProfilesL2ShaperCbs INTEGER
  genEquipProfilesL2ShaperBurstType BurstType
  genEquipProfilesL2ShaperRowStatus RowStatus

GenEquipProfilesL3ServiceShaperEntry  
SEQUENCE    
  genEquipProfilesL3ServiceShaperIndex INTEGER
  genEquipProfilesL3ServiceShaperDescription DisplayString
  genEquipProfilesL3ServiceShaperCir INTEGER
  genEquipProfilesL3ServiceShaperCbs INTEGER
  genEquipProfilesL3ServiceShaperPir INTEGER
  genEquipProfilesL3ServiceShaperPbs INTEGER
  genEquipProfilesL3ServiceShaperBurstType BurstType
  genEquipProfilesL3ServiceShaperRowStatus RowStatus

GenEquipProfilesEgressL4QueueShaperEntry  
SEQUENCE    
  genEquipProfilesEgressL4QueueShaperIndex INTEGER
  genEquipProfilesEgressL4QueueShaperDescription DisplayString
  genEquipProfilesEgressL4QueueShaperCir INTEGER
  genEquipProfilesEgressL4QueueShaperCbs INTEGER
  genEquipProfilesEgressL4QueueShaperBurstType BurstType
  genEquipProfilesEgressL4QueueShaperRowStatus RowStatus

GenEquipTmL4WredAssociationEntry  
SEQUENCE    
  genEquipTmL4WredAssociationIfIndex INTEGER
  genEquipTmL4WredAssociationServiceIndex INTEGER
  genEquipTmL4WredAssociationCosQueueIndex INTEGER
  genEquipTmL4WredAssociationWredProfileId INTEGER

GenEquipTmSchedulerCoSPriAssociationEntry  
SEQUENCE    
  genEquipTmSchedulerCoSPriAssociationIfIndex INTEGER
  genEquipTmSchedulerCoSPriAssociationAssociatedProfileId INTEGER

GenEquipTmL3ServiceShaperAssociationEntry  
SEQUENCE    
  genEquipTmL3ServiceShaperAssociationIfIndex INTEGER
  genEquipTmL3ServiceShaperAssociationServiceClassIndex INTEGER
  genEquipTmL3ServiceShaperAssociationShaperProfileId INTEGER
  genEquipTmL3ServiceShaperAssociationShaperAdmin EnableDisable
  genEquipTmL3ServiceShaperAssociationRowStatus RowStatus

GenEquipTmL2ShaperAssociationEntry  
SEQUENCE    
  genEquipTmL2ShaperAssociationIfIndex INTEGER
  genEquipTmL2ShaperAssociationProfileId INTEGER
  genEquipTmL2ShaperAssociationAdmin EnableDisable
  genEquipTmL2ShaperAssociationRowStatus RowStatus

GenEquipTmL4QueueShaperAssociationEntry  
SEQUENCE    
  genEquipTmL4QueueShaperAssociationIfIndex INTEGER
  genEquipTmL4QueueShaperAssociationServiceIndex INTEGER
  genEquipTmL4QueueShaperAssociationCosQueueIndex INTEGER
  genEquipTmL4QueueShaperAssociationShaperProfileId INTEGER
  genEquipTmL4QueueShaperAssociationShaperProfileAdmin EnableDisable
  genEquipTmL4QueueShaperAssociationRowStatus RowStatus

GenEquipTmSchedulerWfqAssociationEntry  
SEQUENCE    
  genEquipTmSchedulerWfqAssociationIfIndex INTEGER
  genEquipTmSchedulerWfqAssociationProfileId INTEGER

GenEquipSynchronizationPDHClkSrcEntry  
SEQUENCE    
  genEquipSynchronizationPDHClkSrcIFNum INTEGER
  genEquipSynchronizationPDHClkSrcSource INTEGER

GenEquipSynchronizationPipeEntry  
SEQUENCE    
  genEquipSynchronizationPipeId INTEGER
  genEquipSynchronizationPipeInd1 INTEGER
  genEquipSynchronizationPipeInd2 INTEGER
  genEquipSynchronizationPipeStatus INTEGER

GenEquipSynchronizationPTPTcConfigEntry  
SEQUENCE    
  genEquipSynchronizationPTPTcConfigId INTEGER
  genEquipSynchronizationPTPTcConfigMaster INTEGER

GenEquipSynchronizationPTPTcStatusEntry  
SEQUENCE    
  genEquipSynchronizationPTPTcStatusId INTEGER
  genEquipSynchronizationPTPTcStatusState INTEGER
  genEquipSynchronizationPTPTcStatusFreqLock DownUp

GenEquipInterfacesEtherEntry  
SEQUENCE    
  genEquipInterfacesEtherConnType INTEGER
  genEquipInterfacesEtherPortType INTEGER
  genEquipInterfacesEtherAutoNegotiation INTEGER
  genEquipInterfacesEtherDuplex HalfFull
  genEquipInterfacesEtherRate RateMbps
  genEquipInterfacesEtherPortLerningAdmin EnableDisable
  genEquipInterfacesEtherFlowCtrl INTEGER
  genEquipInterfacesEtherLagPortMember INTEGER
  genEquipInterfacesEtherActualDuplex HalfFull
  genEquipInterfacesEtherActualRate RateMbps
  genEquipInterfacesEtherClkSrc INTEGER
  genEquipInterfacesEtherPortServiceType INTEGER
  genEquipInterfacesEtheMACAddress MacAddress
  genEquipInterfacesEtherDefaultVLANId INTEGER
  genEquipInterfacesEtherPortBlockSharedVlans EnableDisable

GenEquipInterfacesE1T1PortGroupEntry  
SEQUENCE    
  genEquipInterfacesE1T1PortGroupId INTEGER
  genEquipInterfacesE1T1PortGroupLineCode INTEGER
  genEquipInterfacesE1T1PortGroupExcessiveBERthreshold BerLevel
  genEquipInterfacesE1T1PortGroupSignalDegradeThreshold INTEGER
  genEquipInterfacesE1T1PortGroupLineCode1to8 INTEGER
  genEquipInterfacesE1T1PortGroupLineCode9to16 INTEGER
  genEquipInterfacesE1T1PortGroupLineCode17to24 INTEGER
  genEquipInterfacesE1T1PortGroupLineCode25to32 INTEGER

GenEquipInterfacesE1T1Entry  
SEQUENCE    
  genEquipInterfacesE1T1Priority INTEGER
  genEquipInterfacesE1T1CurrBER BerLevel
  genEquipInterfacesE1T1Loopback INTEGER
  genEquipInterfacesE1T1AISSStatus INTEGER
  genEquipInterfacesE1T1CableLength INTEGER

GenEquipInterfacesAuxWaySideEntry  
SEQUENCE    
  genEquipInterfacesAuxWaySideAdmin EnableDisable
  genEquipInterfacesAuxWaySideCapacity INTEGER
  genEquipInterfacesAuxWaySideAutoNegotiation OffOn
  genEquipInterfacesAuxWaySideDuplex INTEGER
  genEquipInterfacesAuxWaySideRate RateMbps

GenEquipInterfacesAuxUserChanEntry  
SEQUENCE    
  genEquipInterfacesAuxUserChanType INTEGER

GenEquipInterfacesSdhEntry  
SEQUENCE    
  genEquipInterfacesSdhMuteTx EnableDisableSMI2
  genEquipInterfacesSdhClockSource INTEGER
  genEquipInterfacesSdhAISAdmin EnableDisable
  genEquipInterfacesSdhTraceIdReceived DisplayString
  genEquipInterfacesSdhTraceIdTransmitted DisplayString
  genEquipInterfacesSdhTraceIdExpected DisplayString
  genEquipInterfacesSdhTraceIdStringLength INTEGER
  genEquipInterfacesSdhExcessiveBer INTEGER
  genEquipInterfacesSdhSignalDegrade INTEGER
  genEquipInterfacesSdhLoopback INTEGER
  genEquipInterfacesSdhClockSourceStatus INTEGER
  genEquipInterfacesSdhLineTxProtectionMode INTEGER
  genEquipInterfacesSdhSyncVC INTEGER
  genEquipInterfacesSdhAdmin EnableDisableSMI2
  genEquipInterfacesSdhPdhTimingMode PWPDHClockSource
  genEquipInterfacesSdhSlot INTEGER
  genEquipInterfacesSdhIdleCode INTEGER
  genEquipInterfacesSdhSSMAdmin EnableDisableSMI2
  genEquipInterfacesSdhSSMPattern INTEGER
  genEquipInterfacesSdhTraceIdAdmin EnableDisableSMI2
  genEquipInterfacesSdhVCSignalLabel INTEGER
  genEquipInterfacesSdhVcRdiAdmin EnableDisableSMI2

GenEquipInterfacesSdhLpVcEntry  
SEQUENCE    
  genEquipInterfacesSdhLpVcId INTEGER
  genEquipInterfacesSdhLpVcAIS INTEGER

GenEquipInterfacesSdhStatusEntry  
SEQUENCE    
  genEquipInterfacesSdhStatusIfIndex INTEGER
  genEquipInterfacesSdhStatusLine INTEGER
  genEquipInterfacesSdhStatusOperState DownUp
  genEquipInterfacesSdhStatusRegenerator INTEGER
  genEquipInterfacesSdhStatusClockSourceStatus PWPDHClockSource
  genEquipInterfacesSdhStatusPdhClockStatus PWPDHClockSource
  genEquipInterfacesSdhStatusSlotId INTEGER
  genEquipInterfacesSdhStatusLoopback INTEGER
  genEquipInterfacesSdhStatusMultiplexer INTEGER
  genEquipInterfacesSdhStatusSsmRx INTEGER
  genEquipInterfacesSdhStatusSsmTx INTEGER

GenEquipInterfacesSdhLoopbackStatusEntry  
SEQUENCE    
  genEquipInterfacesSdhLoopbackStatusIfIndex INTEGER
  genEquipInterfacesSdhLoopbackStatusSlotId INTEGER
  genEquipInterfacesSdhLoopbackStatusType INTEGER
  genEquipInterfacesSdhLoopbackStatusCounter INTEGER

GenEquipInterfacesNGASPConfigEntry  
SEQUENCE    
  genEquipInterfacesNGASPConfigControlledInterfaceIfindex INTEGER
  genEquipInterfacesNGASPConfigAdmin EnableDisable
  genEquipInterfacesNGASPConfigMonitoredInterfaceIfindex INTEGER
  genEquipInterfacesNGASPConfigAcmThreshold INTEGER
  genEquipInterfacesNGASPConfigRadioExcessiveBerCriterionAdmin EnableDisable
  genEquipInterfacesNGASPConfigLinkIdMismatchCriterionAdmin EnableDisable
  genEquipInterfacesNGASPConfigRadioLofCriterionAdmin EnableDisable
  genEquipInterfacesNGASPConfigRemoteRadioLofCriterionAdmin EnableDisable
  genEquipInterfacesNGASPConfigRxAcmThresholdCriterionAdmin EnableDisable
  genEquipInterfacesNGASPConfigTxAcmThresholdCriterionAdmin EnableDisable
  genEquipInterfacesNGASPConfigRemoteEthLocCriterionAdmin EnableDisable
  genEquipInterfacesNGASPConfigRemoteFaultTriggerAdmin EnableDisable
  genEquipInterfacesNGASPConfigRemoteRadioExcessiveBerCriterionAdmin EnableDisable
  genEquipInterfacesNGASPConfigMonitoredInterface56 INTEGER
  genEquipInterfacesNGASPConfigCsfModeAdmin EnableDisable
  genEquipInterfacesNGASPConfigMonitoredInterface INTEGER
  genEquipInterfacesNGASPConfigDelayTime INTEGER
  genEquipInterfacesNGASPConfigRowStatus RowStatus

GenEquipInterfacesPWCardEntry  
SEQUENCE    
  genEquipInterfacesPWCardSlotNumber INTEGER
  genEquipInterfacesPWCardExportClkSysRef INTEGER
  genEquipInterfacesPWCardExportClkFrontPannel INTEGER
  genEquipInterfacesPWCardExportClkSysRefCrPort INTEGER
  genEquipInterfacesPWCardExportClkFrontPanelCrPort INTEGER
  genEquipInterfacesPWCardFrontPanelClockSignalInput INTEGER
  genEquipInterfacesPWCardFrontPanelClockSignalOutp INTEGER
  genEquipInterfacesPWCardIpAddrUdpIpTraffic IpAddress
  genEquipInterfacesPWCardIpSubnetUdpIpTraffic IpAddress
  genEquipInterfacesPWCardClkRecoveryMode INTEGER
  genEquipInterfacesPWCardDifferentialClkFrequency INTEGER
  genEquipInterfacesPWCardDifferentialClkSource INTEGER

GenEquipInterfacesServicesPWTDMPortsEntry  
SEQUENCE    
  genEquipInterfacesServicesPWTDMPortsLineType INTEGER
  genEquipInterfacesServicesPWTDMPortsLineCoding INTEGER
  genEquipInterfacesServicesPWTDMPortsAssigned NoYes
  genEquipInterfacesServicesPWTDMPortsChannelization EnableDisable
  genEquipInterfacesServicesPWTDMPortsTimingMode INTEGER
  genEquipInterfacesServicesPWTDMPortsClockSourceRef INTEGER
  genEquipInterfacesServicesPWTDMPortsClkSrcRefPort INTEGER
  genEquipInterfacesServicesPWTDMPortsClkSrcPWId INTEGER
  genEquipInterfacesServicesPWTDMPortsLoopback INTEGER
  genEquipInterfacesServicesPWTDMPortsTimeout INTEGER
  genEquipInterfacesServicesPWTDMPortsIdleCode INTEGER
  genEquipInterfacesServicesPWTDMPortsCounter INTEGER
  genEquipInterfacesServicesPWTDMPortsLineStatus INTEGER

GenEquipInterfacesNGPWCardEntry  
SEQUENCE    
  genEquipInterfacesNGPWCardSlotID INTEGER
  genEquipInterfacesNGPWCardExportClkSysRef PWCclockSysRef
  genEquipInterfacesNGPWCardExportClkSysRefCrPort INTEGER
  genEquipInterfacesNGPWCardIPAddress IpAddress
  genEquipInterfacesNGPWCardIPSubnetMask IpAddress
  genEquipInterfacesNGPWCardClkRecoveryMode INTEGER
  genEquipInterfacesNGPWCardDifferentialClkSource PWCDiffClockSrc
  genEquipInterfacesNGPWCardClockFreq INTEGER
  genEquipInterfacesNGPWCardTDMType INTEGER
  genEquipInterfacesNGPWCardLoopbackTimeout INTEGER

GenEquipInterfacesNGPWClockInterfaceEntry  
SEQUENCE    
  genEquipInterfacesNGPWClockInterfaceSlotID INTEGER
  genEquipInterfacesNGPWClockInterfaceIfIndex INTEGER
  genEquipInterfacesNGPWClockInterfaceAdminRx EnableDisableSMI2
  genEquipInterfacesNGPWClockInterfaceAdminTx EnableDisableSMI2
  genEquipInterfacesNGPWClockInterfaceExportClkFrontPannel INTEGER
  genEquipInterfacesNGPWClockInterfaceExportClkFrontPanelCrPort INTEGER
  genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalInput PWfpClockSignal
  genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalOutput PWfpClockSignal
  genEquipInterfacesNGPWClockInterfaceSSMAdmin EnableDisableSMI2
  genEquipInterfacesNGPWClockInterfaceSSMBit INTEGER
  genEquipInterfacesNGPWClockInterfaceSSMTxDefault INTEGER

GenEquipInterfacesNGPWClockInterfaceStatusEntry  
SEQUENCE    
  genEquipInterfacesNGPWClockInterfaceStatusSlotID INTEGER
  genEquipInterfacesNGPWClockInterfaceStatusIfIndex INTEGER
  genEquipInterfacesNGPWClockInterfaceStatusOperationalState DownUp
  genEquipInterfacesNGPWClockInterfaceStatusSSMTx INTEGER
  genEquipInterfacesNGPWClockInterfaceStatusSSMRx INTEGER

GenEquipInterfacesNGPWEthInterfaceEntry  
SEQUENCE    
  genEquipInterfacesNGPWEthInterfaceSlotID INTEGER
  genEquipInterfacesNGPWEthInterfaceIfIndex INTEGER

GenEquipInterfacesNGPWEthInterfaceStatusEntry  
SEQUENCE    
  genEquipInterfacesNGPWEthInterfaceStatusIfIndex INTEGER
  genEquipInterfacesNGPWEthInterfaceStatusMACAddress OCTET STRING
  genEquipInterfacesNGPWEthInterfaceStatusClearStats NoYes
  genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames64 Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames127 Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames255 Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames511 Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1023 Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1518 Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1522 Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxBytes Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxPackets Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxErrFcs Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxMulticast Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxBroadcast Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxMacControl Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxMacPause Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxMacUnknown Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxErrCode Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxErrFalseCarrier Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxUndersize Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxOversize Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxFragments Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxJabber Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxDropped Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxBytes Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxPackets Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxMulticast Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxBroadcast Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxMacPause Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxDefer Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxExcessDefer Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxSingleCollision Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxMultiCollision Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxLateCollision Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxExcessCollision Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxNoCollision Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxMacPauseHonored Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxDropped Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxJabber Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxErrFcs Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxControl Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxOversize Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxUndersize Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxFragments Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxIwFrames Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxErrFbpUnderrun Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxErrNonvalidMac Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxErrMru Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxErrSdu Counter64
  genEquipInterfacesNGPWEthInterfaceStatusTxErrUnderrun Counter64
  genEquipInterfacesNGPWEthInterfaceStatusRxErrOverrun Counter64
  genEquipInterfacesNGPWEthInterfaceStatusSlotID INTEGER

GenEquipInterfacesNGPWCardStatusEntry  
SEQUENCE    
  genEquipInterfacesNGPWCardStatusSlotID INTEGER
  genEquipInterfacesNGPWCardStatusSWVersion DisplayString

GenEquipInterfacesCetPhyConfigEntry  
SEQUENCE    
  genEquipInterfacesCetPhyConfigIfIndex INTEGER
  genEquipInterfacesCetPhyConfigDescription DisplayString
  genEquipInterfacesCetPhyConfigMediaType MediaType
  genEquipInterfacesCetPhyConfigAdmin EnableDisable
  genEquipInterfacesCetPhyConfigAutoNegotiation AutoNegMode
  genEquipInterfacesCetPhyConfigSpeed SpeedDefs
  genEquipInterfacesCetPhyConfigDuplex HalfFull
  genEquipInterfacesCetPhyConfigMasterSlave MasterSalveSetMode
  genEquipInterfacesCetPhyConfigIfg INTEGER
  genEquipInterfacesCetPhyConfigPreamble INTEGER
  genEquipInterfacesCetPhyConfigMacAddress OCTET STRING
  genEquipInterfacesCetPhyConfigType PortType
  genEquipInterfacesCetPhyConfigPortPmAdmin EnableDisable
  genEquipInterfacesCetPhyConfigPortPmRxBytesThreshold INTEGER
  genEquipInterfacesCetPhyConfigPortPmTxBytesThreshold INTEGER

GenEquipInterfacesCetPhyStatusEntry  
SEQUENCE    
  genEquipInterfacesCetPhyStatusIfIndex INTEGER
  genEquipInterfacesCetPhyStatusMediaType MediaType
  genEquipInterfacesCetPhyStatusOperationalStatus DownUp
  genEquipInterfacesCetPhystatusAutoNegotiation AutoNegMode
  genEquipInterfacesCetPhyStatusSpeed SpeedDefs
  genEquipInterfacesCetPhyStatusDuplex HalfFull
  genEquipInterfacesCetPhyStatusMasterSlave MasterSalveSetMode

GenEquipInterfacesCetLogicConfigEntry  
SEQUENCE    
  genEquipInterfacesCetLogicConfigIfIndex INTEGER
  genEquipInterfacesCetLogicConfigTrafficFlow EnableDisable
  genEquipInterfacesCetLogicConfigEdgePort EdgePortType
  genEquipInterfacesCetLogicConfigIngressTcamClassification INTEGER
  genEquipInterfacesCetLogicConfigDefaultVlanTag INTEGER
  genEquipInterfacesCetLogicConfigInLineCompensation INTEGER
  genEquipInterfacesCetLogicConfigOutLineCompensation INTEGER
  genEquipInterfacesCetLogicConfigPclId INTEGER
  genEquipInterfacesCetLogicConfigDefCos INTEGER
  genEquipInterfacesCetLogicConfigVlanUpToCosTrustMode TrustMode
  genEquipInterfacesCetLogicConfigDscpToCosTrustMode TrustMode
  genEquipInterfacesCetLogicConfigMplsExpToCosTrustMode TrustMode
  genEquipInterfacesCetLogicConfigMacAddress OCTET STRING
  genEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdmin EnableDisable
  genEquipInterfacesCetLogicConfigLoopbackAdmin EnableDisable
  genEquipInterfacesCetLogicConfigLoopbackDuration INTEGER

GenEquipInterfacesCetLogicStatusEntry  
SEQUENCE    
  genEquipInterfacesCetLogicStatusIfIndex INTEGER
  genEquipInterfacesCetLogicStatusOperationalStatus DownUp

GenEquipInterfacesCetBcastPolicerAssociationEntry  
SEQUENCE    
  genEquipInterfacesCetBcastPolicerAssociationIfIndex INTEGER
  genEquipInterfacesCetBcastPolicerAssociationAssociatedProfileId INTEGER
  genEquipInterfacesCetBcastPolicerAssociationAssociationAdmin EnableDisable
  genEquipInterfacesCetBcastPolicerAssociationAssociationRowStatus RowStatus

GenEquipInterfacesCetEtype1PolicerAssociationEntry  
SEQUENCE    
  genEquipInterfacesCetEtype1PolicerAssociationIfIndex INTEGER
  genEquipInterfacesCetEtype1PolicerAssociationProfileId INTEGER
  genEquipInterfacesCetEtype1PolicerAssociationEthertype INTEGER
  genEquipInterfacesCetEtype1PolicerAssociationAdmin EnableDisable
  genEquipInterfacesCetEtype1PolicerAssociationRowStatus RowStatus

GenEquipInterfacesCetEtype2PolicerAssociationEntry  
SEQUENCE    
  genEquipInterfacesCetEtype2PolicerAssociationIfIndex INTEGER
  genEquipInterfacesCetEtype2PolicerAssociationAssociatedProfileId INTEGER
  genEquipInterfacesCetEtype2PolicerAssociationEthertype INTEGER
  genEquipInterfacesCetEtype2PolicerAssociationAdmin EnableDisable
  genEquipInterfacesCetEtype2PolicerAssociationRowStatus RowStatus

GenEquipInterfacesCetEtype3PolicerAssociationEntry  
SEQUENCE    
  genEquipInterfacesCetEtype3PolicerAssociationIfIndex INTEGER
  genEquipInterfacesCetEtype3PolicerAssociationAssociatedProfileId INTEGER
  genEquipInterfacesCetEtype3PolicerAssociationEthertype INTEGER
  genEquipInterfacesCetEtype3PolicerAssociationAdmin EnableDisable
  genEquipInterfacesCetEtype3PolicerAssociationRowStatus RowStatus

GenEquipInterfacesCetMcastPolicerAssociationEntry  
SEQUENCE    
  genEquipInterfacesCetMcastPolicerAssociationIfIndex INTEGER
  genEquipInterfacesCetMcastPolicerAssociationAssociatedProfileId INTEGER
  genEquipInterfacesCetMcastPolicerAssociationAdmin EnableDisable
  genEquipInterfacesCetMcastPolicerAssociationAssociationRowStatus RowStatus

GenEquipInterfacesCetUcastPolicerAssociationEntry  
SEQUENCE    
  genEquipInterfacesCetUcastPolicerAssociationIfIndex INTEGER
  genEquipInterfacesCetUcastPolicerAssociationAssociatedProfileId INTEGER
  genEquipInterfacesCetUcastPolicerAssociationAdmin EnableDisable
  genEquipInterfacesCetUcastPolicerAssociationRowStatus RowStatus

GenEquipInterfacesCetLagEntry  
SEQUENCE    
  genEquipInterfacesCetLagIfIndex INTEGER
  genEquipInterfacesCetLagMember1IfIndex INTEGER
  genEquipInterfacesCetLagMember2IfIndex INTEGER
  genEquipInterfacesCetLagMember3IfIndex INTEGER
  genEquipInterfacesCetLagMember4IfIndex INTEGER
  genEquipInterfacesCetLagMember5IfIndex INTEGER
  genEquipInterfacesCetLagMember6IfIndex INTEGER
  genEquipInterfacesCetLagMember7IfIndex INTEGER
  genEquipInterfacesCetLagMember8IfIndex INTEGER
  genEquipInterfacesCetLagMember9IfIndex INTEGER
  genEquipInterfacesCetLagMember10IfIndex INTEGER
  genEquipInterfacesCetLagMember11IfIndex INTEGER
  genEquipInterfacesCetLagMember12IfIndex INTEGER
  genEquipInterfacesCetLagMember13IfIndex INTEGER
  genEquipInterfacesCetLagMember14IfIndex INTEGER
  genEquipInterfacesCetLagMember15IfIndex INTEGER
  genEquipInterfacesCetLagMember16IfIndex INTEGER
  genEquipInterfacesCetLagRowStatus RowStatus

GenEquipServicesCetConfigServiceToInstanceEntry  
SEQUENCE    
  genEquipServicesCetConfigServiceToInstanceServiceIndex INTEGER
  genEquipServicesCetConfigServiceToInstanceInstanceIndex INTEGER

GenEquipInterfacesIfManagerEntry  
SEQUENCE    
  genEquipInterfacesIfManagerifCascading IfMgrTrueFalse
  genEquipInterfacesIfManagerifSecondaryOperStatus INTEGER

GenEquipInterfacesCascadingConfigurationEntry  
SEQUENCE    
  genEquipInterfacesCascadingConfigurationIfindex INTEGER
  genEquipInterfacesCascadingConfigurationCascading MibTrueFalse

GenEquipInterfacesStm1RstConfigEntry  
SEQUENCE    
  genEquipInterfacesStm1RstConfigIfindex INTEGER
  genEquipInterfacesStm1RstConfigPort INTEGER
  genEquipInterfacesStm1RstConfigAdmin EnableDisableSMI2
  genEquipInterfacesStm1RstConfigMute INTEGER

GenEquipInterfacesStm1RstStatusEntry  
SEQUENCE    
  genEquipInterfacesStm1RstStatusIfindex INTEGER
  genEquipInterfacesStm1RstStatusLoopbackTimer INTEGER
  genEquipInterfacesStm1RstStatusLoopbackType RSTLoopbackType
  genEquipInterfacesStm1RstStatusOperstatus DownUp

GenEquipInterfacesStm1RstPrbsEntry  
SEQUENCE    
  genEquipInterfacesStm1RstPrbsCheckLineClear INTEGER
  genEquipInterfacesStm1RstPrbsCheckLine INTEGER
  genEquipInterfacesStm1RstPrbsCheckLineInv INTEGER
  genEquipInterfacesStm1RstPrbsCheckLineStatus DisplayString
  genEquipInterfacesStm1RstPrbsCheckLineTotErr INTEGER
  genEquipInterfacesStm1RstPrbsCheckRadioClear INTEGER
  genEquipInterfacesStm1RstPrbsCheckRadio INTEGER
  genEquipInterfacesStm1RstPrbsCheckRadioInv INTEGER
  genEquipInterfacesStm1RstPrbsCheckRadioStatus DisplayString
  genEquipInterfacesStm1RstPrbsCheckRadioTotErr INTEGER
  genEquipInterfacesStm1RstPrbsGenLine INTEGER
  genEquipInterfacesStm1RstPrbsGenLineErrIns INTEGER
  genEquipInterfacesStm1RstPrbsGenLineInv INTEGER
  genEquipInterfacesStm1RstPrbsGenRadio INTEGER
  genEquipInterfacesStm1RstPrbsGenRadioErrIns INTEGER
  genEquipInterfacesStm1RstPrbsGenRadioInv INTEGER

Defined Values

microwave-radio 1.3.6.1.4.1.2281
OBJECT IDENTIFIER    

genEquip 1.3.6.1.4.1.2281.10
OBJECT IDENTIFIER    

genEquipUnit 1.3.6.1.4.1.2281.10.1
OBJECT IDENTIFIER    

genEquipNetwork 1.3.6.1.4.1.2281.10.2
OBJECT IDENTIFIER    

genEquipNetworkRemoteIp 1.3.6.1.4.1.2281.10.2.1
This value indicates the Remote IP address.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

genEquipNetworkMateIp 1.3.6.1.4.1.2281.10.2.2
This value indicates the Mate IP address. (same as genEquipProtectionMateIPAddr)
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

genEquipNetworkAgentIp 1.3.6.1.4.1.2281.10.2.3
This value indicates the Agent IP address. (same as genEquipNetworkManagmentLocalIp)
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

genEquipNetworkManagment 1.3.6.1.4.1.2281.10.2.4
OBJECT IDENTIFIER    

genEquipNetworkManagmentLocalIp 1.3.6.1.4.1.2281.10.2.4.1
This value indicates the local IP address. (same as genEquipNetworkAgentIp)
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipNetworkManagmentLocalSubnetMask 1.3.6.1.4.1.2281.10.2.4.2
This value indicates the local subnet mask. (for example 255.255.255.0)
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipNetworkManagmentLocalDefaultGateway 1.3.6.1.4.1.2281.10.2.4.3
This value indicates the local default gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipNetworkManagmentLocalHWAddr 1.3.6.1.4.1.2281.10.2.4.4
This value indicates the MAC Address used for management (related to the management IP address of the system).
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

genEquipNetworkManagmentRemoteSubnetMask 1.3.6.1.4.1.2281.10.2.4.5
This value indicates the Remote subnet mask.(for example 255.255.255.0)
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipNetworkManagmentNumOfPorts 1.3.6.1.4.1.2281.10.2.4.6
This value indicates the number of management ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

genEquipNetworkManagmentInBandVLAN 1.3.6.1.4.1.2281.10.2.4.7
This value indicates the number of in-band VLANs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4090  

genEquipNetworkManagmentPortType 1.3.6.1.4.1.2281.10.2.4.8
This is a configurable option to use in-band or out-of-band management.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER outOfBand(0), inBand(1)  

genEquipNetworkManagmentPortCapacity 1.3.6.1.4.1.2281.10.2.4.9
This value indicates a limit rate for the management port capacity in kbps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n64(0), n128(1), n256(2), n512(3), n1024(4), n2048(5)  

genEquipNetworkManagmentPortAutoNegotiation 1.3.6.1.4.1.2281.10.2.4.10
Enable or disable the Auto Negotiation option, on all management ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipNetworkManagmentPortRate 1.3.6.1.4.1.2281.10.2.4.11
This value indicates the port rate in Mbps (all management ports). Possible values are: - n10(0) 10Mbps - n100(1) 100Mbps - n1000(2) 1000Mbps
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), n10(0), n100(1), n1000(2)  

genEquipNetworkManagmentPortDuplex 1.3.6.1.4.1.2281.10.2.4.12
This value indicates the port duplex value, for all management ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER half(0), full(1)  

genEquipNetworkManagmentBlockMngTowardsLine 1.3.6.1.4.1.2281.10.2.4.13
Blocking the in-band management frames to egress via the Ethernet line interface in pipe application.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipNetworkManagmentIpAddrCfgTable 1.3.6.1.4.1.2281.10.2.4.20
This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot, port number and description. It can be used by the NMS for topology discovery.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipNetworkManagmentIpAddrCfgEntry

genEquipNetworkManagmentIpAddrCfgEntry 1.3.6.1.4.1.2281.10.2.4.20.1
This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot, port number and description. It can be used by the NMS for topology discovery.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipNetworkManagmentIpAddrCfgEntry  

genEquipNetworkManagmentIpAddrCfgMngId 1.3.6.1.4.1.2281.10.2.4.20.1.1
Management Ifindex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipNetworkManagmentIpAddrCfgIpv4Address 1.3.6.1.4.1.2281.10.2.4.20.1.2
This value indicates the local IP address
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipNetworkManagmentIpAddrCfgIpv4SubnetMask 1.3.6.1.4.1.2281.10.2.4.20.1.3
This value indicates the local subnet mask. (for example 255.255.255.0)
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipNetworkManagmentIpAddrCfgDefaultGateway 1.3.6.1.4.1.2281.10.2.4.20.1.4
This value indicates the local default gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipNetworkManagmentIpAddrCfgIpv6Address 1.3.6.1.4.1.2281.10.2.4.20.1.5
This value indicates the Local IPv6. y is a 16-bit hexadecimal field of the form xxxx, where x takes values from 0 to F.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

genEquipNetworkManagmentIpAddrCfgIpv6PrefixLength 1.3.6.1.4.1.2281.10.2.4.20.1.6
IPv6 Prefix-Length specifies the IPv6 subnet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6 1.3.6.1.4.1.2281.10.2.4.20.1.7
This value indicates the local IPv6 default gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

genEquipNetworkIP 1.3.6.1.4.1.2281.10.2.5
OBJECT IDENTIFIER    

genEquipNetworkIPTable 1.3.6.1.4.1.2281.10.2.5.1
This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot, port number and description. It can be used by the NMS for topology discovery.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipNetworkIPEntry

genEquipNetworkIPEntry 1.3.6.1.4.1.2281.10.2.5.1.1
This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot, port number and description. It can be used by the NMS for topology discovery.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipNetworkIPEntry  

genEquipNetworkIPEthernetPort 1.3.6.1.4.1.2281.10.2.5.1.1.1
Ethernet port (local port) is the index of the table, to be taken from ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipNetworkIPPeerMacAddr 1.3.6.1.4.1.2281.10.2.5.1.1.2
The Peer (far-end) Mac address of the managed NE (CPU) connected on the local Ethernet port
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

genEquipNetworkIPPeerIPAddr 1.3.6.1.4.1.2281.10.2.5.1.1.3
The Peer (far-end) IP address of the managed NE (CPU) connected on the local Ethernet port
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipNetworkIPPeerSlotID 1.3.6.1.4.1.2281.10.2.5.1.1.4
The Peer (far-end) slot-id of the managed NE connected on the local Ethernet port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

genEquipNetworkIPPeerPortNumber 1.3.6.1.4.1.2281.10.2.5.1.1.5
The Peer (far-end) port number of the managed NE connected on the local Ethernet port. The port number is sequential starting with 1
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

genEquipNetworkIPPeerDescr 1.3.6.1.4.1.2281.10.2.5.1.1.6
User defined description for the peer port
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

genEquipNetworkIPPeerNodeToNodeConnection 1.3.6.1.4.1.2281.10.2.5.1.1.7
Node To Node Connection. This column is relevant only for STM-1/OC-3 connections. if this parameter is enabled, it means that the STM-1/OC-3 port is connected with another microwave-radio NE, the STM-1/OC-3 port is not an access port, it is used by the NMS to find TDM trails.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipNetworkIPClearAllPeerInfo 1.3.6.1.4.1.2281.10.2.5.2
This parameter is a command to clear the neighbor IP table info
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipNetworkFloatingIp 1.3.6.1.4.1.2281.10.2.6
This value indicates the floating IP used when system is in protection mode. This address must differ from system's own IP address (genEquipNetworkAgentIp) as well as mate unit's (genEquipProtectionMateIPAddr)and must be in the same subnet. A value of 0.0.0.0 will disable the feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipNetworkAgentIpV6 1.3.6.1.4.1.2281.10.2.7
This value indicates the agent IP V6. This parameter will be use for Trap only.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipServices 1.3.6.1.4.1.2281.10.8
OBJECT IDENTIFIER    

genEquipEthernetSwitch 1.3.6.1.4.1.2281.10.8.1
OBJECT IDENTIFIER    

genEquipEthernetSwitchCfg 1.3.6.1.4.1.2281.10.8.1.1
OBJECT IDENTIFIER    

genEquipEthernetSwitchCfgAppType 1.3.6.1.4.1.2281.10.8.1.1.1
The mode of the switch application. Note, managed-switch or metro-swtich require license. Single-pipe: No switching is done, the NE acts as a Pipe. Managed-switch: The switch application is configured as IEEE 802.1Q switch. Metro-switch: The switch application is configured as IEEE 802.1ad switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER single-pipe(1), managed-switch(2), metro-switch(3)  

genEquipEthernetSwitchCfgVIDTable 1.3.6.1.4.1.2281.10.8.1.1.2
The switch VLAN table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchCfgVIDEntry

genEquipEthernetSwitchCfgVIDEntry 1.3.6.1.4.1.2281.10.8.1.1.2.1
The switch VLAN table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchCfgVIDEntry  

genEquipEthernetSwitchCfgVIDIndex 1.3.6.1.4.1.2281.10.8.1.1.2.1.1
VLAN number, the index of the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4095  

genEquipEthernetSwitchCfgVIDName 1.3.6.1.4.1.2281.10.8.1.1.2.1.2
VLAN name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipEthernetSwitchCfgVIDState 1.3.6.1.4.1.2281.10.8.1.1.2.1.3
VLAN state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER suspend(1), active(2)  

genEquipEthernetSwitchCfgVIDMemberPorts 1.3.6.1.4.1.2281.10.8.1.1.2.1.4
A string that indicates in which ports this VLAN is allowed. Port numbers are separated by spaces
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipEthernetSwitchCfgVIDEVCID 1.3.6.1.4.1.2281.10.8.1.1.2.1.5
This parameter defines a name for the Ethernet service running over this VLAN. This information is used by the NMS as a service identifier
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipEthernetSwitchCfgVIDEVCDescription 1.3.6.1.4.1.2281.10.8.1.1.2.1.6
This parameter allows adding a description for the Ethernet service running over this VLAN. This information is informational only for users purposes
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipEthernetSwitchCfgVIDRowStatus 1.3.6.1.4.1.2281.10.8.1.1.2.1.30
The raw status of the vlan table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipEthernetSwitchCfgPbbteEthertype 1.3.6.1.4.1.2281.10.8.1.1.3
The PBB-TE-Tag ethertype value
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

genEquipEthernetSwitchCfgProviderEthertype 1.3.6.1.4.1.2281.10.8.1.1.4
Ethertype of the provider VLANS (S-tag). This parameter configures the Marvell switch and it applys for all the ethernet ports. Possible choises are { 0x8100 , 0x9100 , 0x88A8 , 0x9200 }.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER i0x8100(0), i0x88A8(1), i0x9100(2), i0x9200(3)  

genEquipEthernetSwitchCfgJumboModeAdmin 1.3.6.1.4.1.2281.10.8.1.1.5
This configuration defines the Ethernet Maximal Transmit Unit (MTU) size. When jumbo mode is enabled, MTU=9612 bytes. When disabled, MTU=1632 bytes. This configuration applies to all Ethernet traffic ports except management ports
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchXSTP 1.3.6.1.4.1.2281.10.8.1.2
OBJECT IDENTIFIER    

genEquipEthernetSwitchXSTPProtocol 1.3.6.1.4.1.2281.10.8.1.2.1
Selection of the xSTP protocol. Note that not all protocols may be available in all software releases
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), stp(1), rstp(2), ring-rstp(3), mstp(4), ring-mstp(5)  

genEquipEthernetSwitchXSTPParams 1.3.6.1.4.1.2281.10.8.1.2.2
OBJECT IDENTIFIER    

genEquipEthernetSwitchXSTPBridgeID 1.3.6.1.4.1.2281.10.8.1.2.2.1
The RSTP bridge ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipEthernetSwitchXSTPRootID 1.3.6.1.4.1.2281.10.8.1.2.2.2
The RSTP root id.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipEthernetSwitchXSTPRootPath 1.3.6.1.4.1.2281.10.8.1.2.2.3
The RSTP root path cost.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchXSTPBridgeRole 1.3.6.1.4.1.2281.10.8.1.2.2.4
The bridge role.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER root-bridge(0), designated-bridge(1)  

genEquipEthernetSwitchXSTPCfgPriority 1.3.6.1.4.1.2281.10.8.1.2.2.5
RSTP Bridge priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..61440  

genEquipEthernetSwitchXSTPParamsEthernetPortsTable 1.3.6.1.4.1.2281.10.8.1.2.2.6
RSTP port status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry

genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 1.3.6.1.4.1.2281.10.8.1.2.2.6.1
RSTP port status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry  

genEquipEthernetSwitchXSTPParamsEthernetPortsState 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.1
RSTP port state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER discarding(0), listening(1), learning(2), forwarding(3), blocking(4)  

genEquipEthernetSwitchXSTPParamsEthernetPortsRole 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.2
RSTP port role.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER masterport(0), alternate(1), rootport(2), designated(3), disabled(4), backup(5)  

genEquipEthernetSwitchXSTPParamsEthernetPortsPathCost 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.3
RSTP configured path cost.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..200000000  

genEquipEthernetSwitchXSTPParamsEthernetPortsPriority 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.4
RSTP configured port priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..240  

genEquipEthernetSwitchXSTPParamsEthernetDesPathCost 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.5
RSTP designated path cost. This is the path cost to the root port from this local port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchXSTPParamsEthernetEdgePort 1.3.6.1.4.1.2281.10.8.1.2.2.6.1.6
This parameter indicates if the port is an Edge port or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipEthernetSwitchQoS 1.3.6.1.4.1.2281.10.8.1.3
OBJECT IDENTIFIER    

genEquipEthernetSwitchQoSTable 1.3.6.1.4.1.2281.10.8.1.3.1
The switch application, QoS Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchQoSEntry

genEquipEthernetSwitchQoSEntry 1.3.6.1.4.1.2281.10.8.1.3.1.1
The switch application, QoS Table, per Ethernet port based on ifIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchQoSEntry  

genEquipEthernetSwitchQoSFirstCrit 1.3.6.1.4.1.2281.10.8.1.3.1.1.1
First classification criteria. This is the first criteria which will be evaluated for incoming frames. queueDecision causes classification by defined static MAC address. pbitOverride causes classification by pbits. queueAndPbitOverridecauses classification by defined static MAC address, and changes the pbits accordingly.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), queueDecision(1), pbitOverride(2), queueAndPbitOverride(3)  

genEquipEthernetSwitchQoSSecondCrit 1.3.6.1.4.1.2281.10.8.1.3.1.1.2
Second classification criteria. Applicable if match with first criteria is not found. queueDecision causes classification by defined VLAN to queue mapping. pbitOverride causes classification by pbits. queueAndPbitOverrideclassification by defined VLAN to queue mapping, and changes the pbits accordingly.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), queueDecision(1), pbitOverride(2), queueAndPbitOverride(3)  

genEquipEthernetSwitchQoSThirdCrit 1.3.6.1.4.1.2281.10.8.1.3.1.1.3
Third classification criteria. Applicable if match with first or second criteria is not found. ipTosPriority causes classification by defined IP TOS to queue mapping only. vlanPbitspriority causes classification by pbits only. ipTosOverVlanPbitsPriority causes classification by IP TOS and then by pbits . ipTosOverVlanPbitsPriority causes classification by pbits and then by IP TOS. portPriority causes port-based classification according to port priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ipTosPriority(0), vlanPbitspriority(1), ipTosOverVlanPbitsPriority(2), vlanPbitsOverIpTosPriority(3), portPriority(4)  

genEquipEthernetSwitchQoSDefClassification 1.3.6.1.4.1.2281.10.8.1.3.1.1.4
Default classification for frame that does suit to the previous classifications. Choosing first will classify this frame as the first criteria for example.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER first(0), second(1), third(2), fourth(3)  

genEquipEthernetSwitchQoSEgressSched 1.3.6.1.4.1.2281.10.8.1.3.1.1.5
Egress scheduler options.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER allQueuesStrict(0), fourthQueueStrict(1), fourthThirdQueuesStrict(2), allQueuesHrr(3)  

genEquipEthernetSwitchQoSEgressShaper 1.3.6.1.4.1.2281.10.8.1.3.1.1.6
Enable/Disable egress shaping.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipEthernetSwitchQoSEgressShaperRate 1.3.6.1.4.1.2281.10.8.1.3.1.1.7
Egress shaper rate.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 64..1000000  

genEquipEthernetSwitchQoSIngressPolicer 1.3.6.1.4.1.2281.10.8.1.3.1.1.8
Ingress policer (rate limiting) name assiciated with this port. The policer Name is defined in genEquipEthernetSwitchQoSPolicerNameName (in a table)
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipEthernetSwitchVlanPbitRemapTable 1.3.6.1.4.1.2281.10.8.1.3.2
VLAN priority bits remapping table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchVlanPbitRemapEntry

genEquipEthernetSwitchVlanPbitRemapEntry 1.3.6.1.4.1.2281.10.8.1.3.2.1
VLAN priority bits remap table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchVlanPbitRemapEntry  

genEquipEthernetSwitchVlanPbitRemapPbit 1.3.6.1.4.1.2281.10.8.1.3.2.1.1
The ingress Pbit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchVlanPbitRemapRemappedPbit 1.3.6.1.4.1.2281.10.8.1.3.2.1.2
The remapped Pbit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSVLANIdToQueueTable 1.3.6.1.4.1.2281.10.8.1.3.3
VLAN Id to Queue mapping table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchQoSVLANIdToQueueEntry

genEquipEthernetSwitchQoSVLANIdToQueueEntry 1.3.6.1.4.1.2281.10.8.1.3.3.1
VLAN Id to Queue mapping table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchQoSVLANIdToQueueEntry  

genEquipEthernetSwitchQoSVLANIdToQueueQueue 1.3.6.1.4.1.2281.10.8.1.3.3.1.1
Queue for the vlan.
Status: mandatory Access: read-write
OBJECT-TYPE    
  QueueName  

genEquipEthernetSwitchLag 1.3.6.1.4.1.2281.10.8.1.4
OBJECT IDENTIFIER    

genEquipEthernetSwitchLagDistFunction 1.3.6.1.4.1.2281.10.8.1.4.1
LAG distribution function.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER simple-xor(0), hash(1)  

genEquipEthernetSwitchLagMaxNumber 1.3.6.1.4.1.2281.10.8.1.4.2
Max number of LAG port groups.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchETM 1.3.6.1.4.1.2281.10.8.1.5
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmAdmin 1.3.6.1.4.1.2281.10.8.1.5.1
Enabling/Disabling the entire enhanced TM functionality.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmPTPOptimizedTransportModeAdmin 1.3.6.1.4.1.2281.10.8.1.5.2
Precision Time Protocol low PDV channel admin Upon enabling all the packets classified to the 8th queue will bypass the scheduler and will be sent directly to the Radio Frame. Enabling this parameter will fail if Wayside is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmCountersClear 1.3.6.1.4.1.2281.10.8.1.5.3
Reset selected module's counters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipEthernetSwitchEtmPTPOptimizedTransportMode 1.3.6.1.4.1.2281.10.8.1.5.4
PTP optimized transport channel operation mode. In High-CoS-Queue-8 mode all the frames that will be classified to the 8th queue in the traffic manager will be send to the PTP optimized transport channel. In IEEE-1588 mode IEEE 1588 frames will be identified automatically based on UDP ports and/or ethertypes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER high-Cos-Queue-8(0), ieee-1588(1)  

genEquipEthernetSwitchEtmClassifier 1.3.6.1.4.1.2281.10.8.1.5.6
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierByMac 1.3.6.1.4.1.2281.10.8.1.5.6.1
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierByMacAdmin 1.3.6.1.4.1.2281.10.8.1.5.6.1.1
Enabling/Disabling CoS and color classification by destination MAC addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmClassifierByMacTable 1.3.6.1.4.1.2281.10.8.1.5.6.1.2
Table for CoS and color classification by destination MAC address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmClassifierByMacEntry

genEquipEthernetSwitchEtmClassifierByMacEntry 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1
Table for CoS and color classification by destination MAC address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmClassifierByMacEntry  

genEquipEthernetSwitchEtmClassifierByMacIndex 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.1
The index is pointing to a table entry. Each entry contains different MAC address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

genEquipEthernetSwitchEtmClassifierByMacValue 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.2
MAC Address value for CoS Classification by MAC Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

genEquipEthernetSwitchEtmClassifierByMacCos 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.3
CoS value for CoS Classification by MAC Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierByMacColor 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.4
Color value for CoS Classification by MAC Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipEthernetSwitchEtmClassifierByMacRowStatus 1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.30
Row Status for this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipEthernetSwitchEtmClassifierByUdpPort 1.3.6.1.4.1.2281.10.8.1.5.6.2
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierByUdpPortAdmin 1.3.6.1.4.1.2281.10.8.1.5.6.2.1
Enabling/Disabling CoS and color classification by UDP source and/or destination ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmClassifierByUdpPortTable 1.3.6.1.4.1.2281.10.8.1.5.6.2.2
Table for CoS and color classification by UDP ports. Classification may be based on source port, dest port ,or both - use validity parameter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmClassifierByUdpPortEntry

genEquipEthernetSwitchEtmClassifierByUdpPortEntry 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1
Entry for CoS and color classification by UDP ports. Classification may be based on source port, dest port ,or both - use validity parameter.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmClassifierByUdpPortEntry  

genEquipEthernetSwitchEtmClassifierByUdpPortIndex 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.1
The index is pointing to a table entry. Each entry contains different UDP source and destination ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

genEquipEthernetSwitchEtmClassifierByUdpPortSrcPort 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.2
UDP source port value for CoS Classification by UDP ports Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmClassifierByUdpPortDestPort 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.3
UDP dest. port value for CoS Classification by UDP ports Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmClassifierByUdpPortCos 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.4
CoS value for CoS Classification by UDP Ports Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierByUdpPortColor 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.5
Color value for CoS Classification by UDP ports Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipEthernetSwitchEtmClassifierByUdpPortValidity 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.6
Validity value for CoS Classification by UDP ports Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unused(0), src(1), dest(2), both(3)  

genEquipEthernetSwitchEtmClassifierByUdpPortRowStatus 1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.30
Row Status for this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipEthernetSwitchEtmClassifierByKnownPduMac 1.3.6.1.4.1.2281.10.8.1.5.6.4
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierByKnownPduMacAdmin 1.3.6.1.4.1.2281.10.8.1.5.6.4.1
Enabling/Disabling CoS and color classification by known PDU MAC addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmClassifierByKnownPduMacTable 1.3.6.1.4.1.2281.10.8.1.5.6.4.2
Table for CoS and color classification by known PDU MAC addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry

genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1
Table entry for CoS and color classification by known PDU MAC addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry  

genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.1
The index is pointing to a table entry. Each entry contains different PDU MAC address value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..66  

genEquipEthernetSwitchEtmClassifierByKnownPduMacAddress 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.2
CoS value for MAC address Classification by known PDU Table Entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

genEquipEthernetSwitchEtmClassifierByKnownPduMacCos 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.3
CoS value for CoS Classification by known PDU Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierByKnownPduMacColor 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.4
Color value for CoS Classification by known PDU Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipEthernetSwitchEtmClassifierByKnownPduMacValidity 1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.5
Validity value for Cos Classification by known PDU Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmClassifierByService 1.3.6.1.4.1.2281.10.8.1.5.6.5
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierByServiceAdmin 1.3.6.1.4.1.2281.10.8.1.5.6.5.1
Enabling/Disabling CoS and color classification by service IDs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmClassifierByServiceTable 1.3.6.1.4.1.2281.10.8.1.5.6.5.2
Table for CoS and color classification by service-ids.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmClassifierByServiceEntry

genEquipEthernetSwitchEtmClassifierByServiceEntry 1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1
Table entry for CoS and color classification by service-ids.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmClassifierByServiceEntry  

genEquipEthernetSwitchEtmClassifierByServiceIndex 1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.1
The index is pointing to a table entry. Each entry contains a mapping of service-id to CoS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

genEquipEthernetSwitchEtmClassifierByServiceCos 1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.2
CoS value for CoS serviceID Mapping Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierByServiceColor 1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.3
Color value for CoS serviceId Mapping Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipEthernetSwitchEtmClassifierByServiceUsage 1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.4
Validity value for CoS serviceID Mapping Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmClassifierByVlanPbits 1.3.6.1.4.1.2281.10.8.1.5.6.6
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierByVlanPbitsAdmin 1.3.6.1.4.1.2281.10.8.1.5.6.6.1
Enabling/Disabling CoS and color classification by VLAN P-bits and CFI/DEI bit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanTable 1.3.6.1.4.1.2281.10.8.1.5.6.6.2
Table for CoS and color classification by VLAN S-tag P-bits and DEI bit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry

genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1
Table entry for CoS and color classification by VLAN S-tag P-bits and DEI bit.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry  

genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.1
Pbit vlan index to table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriority 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.2
Pbit value for regular classification prioritization.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDei 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.3
DEI value for regular classification prioritization by S-tag vlan.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCos 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.4
CoS value for regular classification prioritization by S-tag VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColor 1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.5
Color value for regular classification prioritization by S-tag VLAN.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipEthernetSwitchEtmClassifierByDscp 1.3.6.1.4.1.2281.10.8.1.5.6.7
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierByDscpAdmin 1.3.6.1.4.1.2281.10.8.1.5.6.7.1
Enabling/Disabling Cos and color classification by DSCP/TOS bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmClassifierByDscpTable 1.3.6.1.4.1.2281.10.8.1.5.6.7.2
Table for CoS and color classification by DSCP/TOS bits.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmClassifierByDscpEntry

genEquipEthernetSwitchEtmClassifierByDscpEntry 1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1
Table entry for CoS and color classification by DSCP/TOS bits.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmClassifierByDscpEntry  

genEquipEthernetSwitchEtmClassifierByDscpValue 1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.1
The index is pointing to a table entry. Each entry contains different DSCP/TOS bits mapping.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

genEquipEthernetSwitchEtmClassifierByDscpCos 1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.2
CoS value for regular classification prioritization by DSCP-tag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierByDscpColor 1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.3
Color value for regular classification prioritization by MPLS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipEthernetSwitchEtmClassifierByMplsExp 1.3.6.1.4.1.2281.10.8.1.5.6.8
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierByMplsExpAdmin 1.3.6.1.4.1.2281.10.8.1.5.6.8.1
Enabling/Disabling CoS and color classification by MPLS experimantal bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmClassifierByMplsExpTable 1.3.6.1.4.1.2281.10.8.1.5.6.8.2
Table for CoS and color classification by MPLS experimental bits.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmClassifierByMplsExpEntry

genEquipEthernetSwitchEtmClassifierByMplsExpEntry 1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1
Table entry for CoS and color classification by MPLS experimental bits.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmClassifierByMplsExpEntry  

genEquipEthernetSwitchEtmClassifierByMplsExpValue 1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.1
The index is pointing to a table entry. Each entry contains different MPLS experimantal bits mapping.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierByMplsExpCos 1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.2
value for regular classification prioritization by MPLS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierByMplsExpColor 1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.3
Color value for regular classification prioritization by MPLS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipEthernetSwitchEtmClassifierByDefaultCosColor 1.3.6.1.4.1.2281.10.8.1.5.6.9
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierByDefaultCos 1.3.6.1.4.1.2281.10.8.1.5.6.9.1
CoS value for regular classification prioritization by default port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierByDefaultColor 1.3.6.1.4.1.2281.10.8.1.5.6.9.2
Table for regular priority by default port mapping table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipEthernetSwitchEtmClassifierByCosToQueue 1.3.6.1.4.1.2281.10.8.1.5.6.10
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierByCosToQueueTable 1.3.6.1.4.1.2281.10.8.1.5.6.10.1
Table for VLAN to FlowId mapping .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry

genEquipEthernetSwitchEtmClassifierByCosToQueueEntry 1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1
Table for VLAN to FlowId mapping .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry  

genEquipEthernetSwitchEtmClassifierByCosToQueueIndex 1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1.1
The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmClassifierByCosToQueueValue 1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1.2
Queue index for CoS to Queue Mapping Table Entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

genEquipEthernetSwitchEtmClassifierVlanidToService 1.3.6.1.4.1.2281.10.8.1.5.6.11
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierVlanidToServiceTable 1.3.6.1.4.1.2281.10.8.1.5.6.11.1
Table for VLAN to Vlan To Servies mapping .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry

genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry 1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1
Table for VLAN to Vlan To Servies mapping .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry  

genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex 1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1.1
The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValue 1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1.2
Service ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 1.3.6.1.4.1.2281.10.8.1.5.6.12
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmClassifierInbandMgmtAdmin 1.3.6.1.4.1.2281.10.8.1.5.6.12.1
Enabling/Disabling CoS and Color classification by VLAN ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmClassifierInbandMgmtVlanId 1.3.6.1.4.1.2281.10.8.1.5.6.12.2
Inband Management vlan id. This parameter should be the same as genEquipEthernetSwitchEtmClassifierInbandMgmtVlanId.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4090  

genEquipEthernetSwitchEtmClassifierInbandMgmtCos 1.3.6.1.4.1.2281.10.8.1.5.6.12.3
Class of Service. Allowed values: [0-7].
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipEthernetSwitchEtmClassifierInbandMgmtColor 1.3.6.1.4.1.2281.10.8.1.5.6.12.4
Color 1=green ; 0=yellow.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipEthernetSwitchEtmPolicers 1.3.6.1.4.1.2281.10.8.1.5.8
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmPolicerModuleAdmin 1.3.6.1.4.1.2281.10.8.1.5.8.1
Enabling/Disabling Policing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmServiceToPolicerTable 1.3.6.1.4.1.2281.10.8.1.5.8.2
Table of Service to Policeer mapping.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmServiceToPolicerEntry

genEquipEthernetSwitchEtmServiceToPolicerEntry 1.3.6.1.4.1.2281.10.8.1.5.8.2.1
Table of Service to Policeer mapping.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmServiceToPolicerEntry  

genEquipEthernetSwitchEtmServiceToPolicerIndex 1.3.6.1.4.1.2281.10.8.1.5.8.2.1.1
Service Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

genEquipEthernetSwitchEtmServiceToPolicerValue 1.3.6.1.4.1.2281.10.8.1.5.8.2.1.2
Policer to be used for the specific Service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipEthernetSwitchEtmServiceToPolicerPerCosOption 1.3.6.1.4.1.2281.10.8.1.5.8.2.1.3
Policer per CoS option. If enabled, each Service will be mapped to 8 policers while each policer will be used for a different CoS value. This option can be used only for the pilicers with indeces of multiple of 8. i.e 8,16,24,32,240,248.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmPolicerConfigTable 1.3.6.1.4.1.2281.10.8.1.5.8.3
Table of Policers configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmPolicerConfigEntry

genEquipEthernetSwitchEtmPolicerConfigEntry 1.3.6.1.4.1.2281.10.8.1.5.8.3.1
Table of Policers configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmPolicerConfigEntry  

genEquipEthernetSwitchEtmPolicerConfigIndex 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.1
Service Index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

genEquipEthernetSwitchEtmPolicerConfigAdmin 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.2
Egress policer admin disables/enables the policing feature per policer. If not enabled, the policer is in bypass mode (no rate limiting).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmPolicerConfigColorAware 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.3
Whether policer is color aware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmPolicerConfigCir 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.4
Egress policer CIR value - the committed rate user requests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmPolicerConfigCbs 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.5
Egress policer committed burst size value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..128  

genEquipEthernetSwitchEtmPolicerConfigEir 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.6
Egress policer EIR value - the excess rate user requests.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmPolicerConfigEbs 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.7
Egress policer excess burst size value (bytes).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..128  

genEquipEthernetSwitchEtmPolicerConfigCoupling 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.8
Egress policer coupling mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmPolicerConfigLineComp 1.3.6.1.4.1.2281.10.8.1.5.8.3.1.9
Egress policer line compensation value (bytes).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

genEquipEthernetSwitchEtmQueues 1.3.6.1.4.1.2281.10.8.1.5.9
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmQueuesTable 1.3.6.1.4.1.2281.10.8.1.5.9.1
Table of queue sizes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmQueuesEntry

genEquipEthernetSwitchEtmQueuesEntry 1.3.6.1.4.1.2281.10.8.1.5.9.1.1
Table entry of queue sizes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmQueuesEntry  

genEquipEthernetSwitchEtmQueuesIndex 1.3.6.1.4.1.2281.10.8.1.5.9.1.1.1
The Index to a queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

genEquipEthernetSwitchEtmQueuesSize 1.3.6.1.4.1.2281.10.8.1.5.9.1.1.2
Size of queue[i]
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER kbit-0(0), kbit-500(1), kbit-1000(2), kbit-2000(3), kbit-4000(4), kbit-250(5), kbit-3000(6), kbit-3500(7)  

genEquipEthernetSwitchEtmWred 1.3.6.1.4.1.2281.10.8.1.5.10
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmWredAdmin 1.3.6.1.4.1.2281.10.8.1.5.10.1
Enabling/Disabling WRED.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmWredThresholdsTable 1.3.6.1.4.1.2281.10.8.1.5.10.2
WRED thresholds per queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmWredThresholdsEntry

genEquipEthernetSwitchEtmWredThresholdsEntry 1.3.6.1.4.1.2281.10.8.1.5.10.2.1
WRED entry thresholds per queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmWredThresholdsEntry  

genEquipEthernetSwitchEtmWredQueuesIndex 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.1
WRED thresholds per queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

genEquipEthernetSwitchEtmWredThresholdsGreenThLow 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.2
WRED green low threshold defines the queue level (in Kbits) point that the mechanism should start checking if to drop the green frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4000  

genEquipEthernetSwitchEtmWredThresholdsGreenThHigh 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.3
WRED green high threshold defines the queue level of occupancy (in Kbits) point that the WRED must drop all arriving green colored frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4000  

genEquipEthernetSwitchEtmWredThresholdsYellowThLow 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.4
WRED yellow low threshold defines the queue level (in Kbits) point that the mechanism should start checking if to drop the yellow frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4000  

genEquipEthernetSwitchEtmWredThresholdsYellowThHigh 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.5
WRED yellow high threshold defines the queue level of occupancy (in Kbits) point that the WRED must drop all arriving yellow colored frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4000  

genEquipEthernetSwitchEtmWredThresholdsGreenMaxDrop 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.6
WRED green max drop threshold the probability to drop frame at the green high threshold (in percent based units).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

genEquipEthernetSwitchEtmWredThresholdsYellowMaxDrop 1.3.6.1.4.1.2281.10.8.1.5.10.2.1.7
WRED yellow max drop threshold the probability to drop frame at the yellow high threshold (in percent based units).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

genEquipEthernetSwitchEtmMarker 1.3.6.1.4.1.2281.10.8.1.5.11
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmMarkerAdmin 1.3.6.1.4.1.2281.10.8.1.5.11.1
Enabling/Disabling marking of VLAN P-bits and DEI/CFI bit at the egress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmMarkerTable 1.3.6.1.4.1.2281.10.8.1.5.11.2
Table of CoS and color to Pbits and DEI marking for S-VALNS.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmMarkerEntry

genEquipEthernetSwitchEtmMarkerEntry 1.3.6.1.4.1.2281.10.8.1.5.11.2.1
Table of CoS and color to Pbits and DEI marking for S-VALNS.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmMarkerEntry  

genEquipEthernetSwitchEtmMarkerCoS 1.3.6.1.4.1.2281.10.8.1.5.11.2.1.1
CoS value as was mapped by the TM calssifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

genEquipEthernetSwitchEtmMarkerColor 1.3.6.1.4.1.2281.10.8.1.5.11.2.1.2
Color value as was mapped by the TM calssifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

genEquipEthernetSwitchEtmMarkerPbit 1.3.6.1.4.1.2281.10.8.1.5.11.2.1.3
VLAN 802.1p P-bit value to be modified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

genEquipEthernetSwitchEtmMarkerCfi 1.3.6.1.4.1.2281.10.8.1.5.11.2.1.4
VLAN CFI/DEI value to be modified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2  

genEquipEthernetSwitchEtmScheduler 1.3.6.1.4.1.2281.10.8.1.5.12
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmSchedulerQuantum 1.3.6.1.4.1.2281.10.8.1.5.12.1
WFQ Quantum for credit calculation in bytes (64, 128, 256, 512).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmSchedulerConfigTable 1.3.6.1.4.1.2281.10.8.1.5.12.2
Table for scheduler configuration: priority and weight for each queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmSchedulerConfigEntry

genEquipEthernetSwitchEtmSchedulerConfigEntry 1.3.6.1.4.1.2281.10.8.1.5.12.2.1
Table entry for scheduler configuration: priority and weight for each queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmSchedulerConfigEntry  

genEquipEthernetSwitchEtmSchedulerConfigQueueIndex 1.3.6.1.4.1.2281.10.8.1.5.12.2.1.1
queue index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

genEquipEthernetSwitchEtmSchedulerConfigPriority 1.3.6.1.4.1.2281.10.8.1.5.12.2.1.2
Strict priority of each queue. 4=highest , 1=lowest.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipEthernetSwitchEtmSchedulerConfigWeight 1.3.6.1.4.1.2281.10.8.1.5.12.2.1.3
WFQ Weights for each queue
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

genEquipEthernetSwitchEtmShaper 1.3.6.1.4.1.2281.10.8.1.5.13
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmShaperGlobalAdmin 1.3.6.1.4.1.2281.10.8.1.5.13.1
Global Shaper admin disables/enables the global shaping feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmShaperConfigTable 1.3.6.1.4.1.2281.10.8.1.5.13.2
Table of shapers' configurations. Each shaper is on the egress of a queue..
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchEtmShaperConfigEntry

genEquipEthernetSwitchEtmShaperConfigEntry 1.3.6.1.4.1.2281.10.8.1.5.13.2.1
Table entry of shapers' configurations. Each shaper is on the egress of a queue..
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchEtmShaperConfigEntry  

genEquipEthernetSwitchEtmShaperConfigIndex 1.3.6.1.4.1.2281.10.8.1.5.13.2.1.1
queue index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

genEquipEthernetSwitchEtmShaperConfigAdmin 1.3.6.1.4.1.2281.10.8.1.5.13.2.1.2
Egress Shaper admin disables/enables the shaping feature per queue.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipEthernetSwitchEtmShaperConfigCir 1.3.6.1.4.1.2281.10.8.1.5.13.2.1.3
Egress shaper CIR value - the committed rate as given by the user.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000000  

genEquipEthernetSwitchEtmShaperConfigCbs 1.3.6.1.4.1.2281.10.8.1.5.13.2.1.4
Egress shaper committed burst size value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..128000  

genEquipEthernetSwitchEtmShaperConfigLineComp 1.3.6.1.4.1.2281.10.8.1.5.13.2.1.5
Egress shaper line compensation value transmitted IFG + Preamble. The shaper adds this value to each arriving frame size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

genEquipEthernetSwitchEtmStatistics 1.3.6.1.4.1.2281.10.8.1.5.14
OBJECT IDENTIFIER    

genEquipEthernetSwitchEtmStatisticsPortTotalBytesTransmitted 1.3.6.1.4.1.2281.10.8.1.5.14.1
The number of bytes transmitted via the port (goes into PM).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmStatisticsPortTotalUnicastFramesTransmitted 1.3.6.1.4.1.2281.10.8.1.5.14.2
TThe number of Unicast frames transmitted to the radio port..
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmStatisticsPortTotalMulticastFramesTransmitted 1.3.6.1.4.1.2281.10.8.1.5.14.3
The number of Multicast frames transmitted to the radio port..
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmStatisticsPortTotalBroadcastFramesTransmitted 1.3.6.1.4.1.2281.10.8.1.5.14.4
The number of Broadcast frames transmitted to the radio port..
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmStatisticsPortFrames64octTransmitted 1.3.6.1.4.1.2281.10.8.1.5.14.5
The total number of frames transmitted with a length of exactly 64 Octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmStatisticsPortFrames65to127Transmitted 1.3.6.1.4.1.2281.10.8.1.5.14.6
The total number of frames transmitted with a length of 65-127 Octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmStatisticsPortFrames128to255Transmitted 1.3.6.1.4.1.2281.10.8.1.5.14.7
The total number of frames transmitted with a length of 128-255 Octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmStatisticsPortFrames256to511Transmitted 1.3.6.1.4.1.2281.10.8.1.5.14.8
The total number of frames transmitted with a length of 256-511 Octets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmStatisticsPortFrames512to1023Transmitted 1.3.6.1.4.1.2281.10.8.1.5.14.9
TThe total number of frames transmitted with a length of 512-1023 Octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchEtmStatisticsPortFrames1024toMtuTransmitted 1.3.6.1.4.1.2281.10.8.1.5.14.10
The total number of frames transmitted with a length between 1024 and MaxTransmitSize Octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSIPPbits 1.3.6.1.4.1.2281.10.8.1.3.4
OBJECT IDENTIFIER    

genEquipEthernetSwitchQoSIPPbitsIPPrio 1.3.6.1.4.1.2281.10.8.1.3.4.1
IP priority options.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ipPrecedence(0), ipv4TOSIPv6(1)  

genEquipEthernetSwitchQoSIPPbitsTable 1.3.6.1.4.1.2281.10.8.1.3.4.2
Mapping of IP pbits to Queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchQoSIPPbitsEntry

genEquipEthernetSwitchQoSIPPbitsEntry 1.3.6.1.4.1.2281.10.8.1.3.4.2.1
Mapping of IP pbits to Queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchQoSIPPbitsEntry  

genEquipEthernetSwitchQoSIPPbitsId 1.3.6.1.4.1.2281.10.8.1.3.4.2.1.1
The pbit number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSIPPbitsQueue 1.3.6.1.4.1.2281.10.8.1.3.4.2.1.2
the queue for that pbit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  QueueName  

genEquipEthernetSwitchQoSVLANPbitsTable 1.3.6.1.4.1.2281.10.8.1.3.5
VLAN pbit to queue mapping table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchQoSVLANPbitsEntry

genEquipEthernetSwitchQoSVLANPbitsEntry 1.3.6.1.4.1.2281.10.8.1.3.5.1
VLAN pbit to queue mapping table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchQoSVLANPbitsEntry  

genEquipEthernetSwitchQoSVLANPbitsId 1.3.6.1.4.1.2281.10.8.1.3.5.1.1
The VLAN'S pbit (index of the table)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

genEquipEthernetSwitchQoSVLANPbitsQueue 1.3.6.1.4.1.2281.10.8.1.3.5.1.2
The mapped queue for the corresponding VLAN .
Status: mandatory Access: read-write
OBJECT-TYPE    
  QueueName  

genEquipEthernetSwitchQoSQueueWeightsTable 1.3.6.1.4.1.2281.10.8.1.3.6
Queue weights mapping table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchQoSQueueWeightsEntry

genEquipEthernetSwitchQoSQueueWeightsEntry 1.3.6.1.4.1.2281.10.8.1.3.6.1
Queue weights mapping table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchQoSQueueWeightsEntry  

genEquipEthernetSwitchQoSQueueWeightsId 1.3.6.1.4.1.2281.10.8.1.3.6.1.1
Index for this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

genEquipEthernetSwitchQoSQueueWeightsQueue 1.3.6.1.4.1.2281.10.8.1.3.6.1.2
The queue number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  QueueName  

genEquipEthernetSwitchQoSQueueWeightsWeight 1.3.6.1.4.1.2281.10.8.1.3.6.1.3
The weight for the queue
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

genEquipEthernetSwitchQoSPolicerNameTable 1.3.6.1.4.1.2281.10.8.1.3.7
Table of configured policers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchQoSPolicerNameEntry

genEquipEthernetSwitchQoSPolicerNameEntry 1.3.6.1.4.1.2281.10.8.1.3.7.1
Table of configured policers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchQoSPolicerNameEntry  

genEquipEthernetSwitchQoSPolicerNameId 1.3.6.1.4.1.2281.10.8.1.3.7.1.1
Policer ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSPolicerNameName 1.3.6.1.4.1.2281.10.8.1.3.7.1.2
Policer name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipEthernetSwitchQoSPolicerNameRowStatus 1.3.6.1.4.1.2281.10.8.1.3.7.1.30
Policer row status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipEthernetSwitchQoSPolicerListTable 1.3.6.1.4.1.2281.10.8.1.3.8
The policer class table list.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchQoSPolicerListEntry

genEquipEthernetSwitchQoSPolicerListEntry 1.3.6.1.4.1.2281.10.8.1.3.8.1
The policer class table list.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchQoSPolicerListEntry  

genEquipEthernetSwitchQoSPolicerListId 1.3.6.1.4.1.2281.10.8.1.3.8.1.1
The policer ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSPolicerListName 1.3.6.1.4.1.2281.10.8.1.3.8.1.2
The policer class name
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipEthernetSwitchQoSPolicerListClassName 1.3.6.1.4.1.2281.10.8.1.3.8.1.3
The policer class name
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipEthernetSwitchQoSPolicerListTrafficType 1.3.6.1.4.1.2281.10.8.1.3.8.1.4
The traffic type that the policer applies to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknownUcast(1), unknowMulticast(2), broadcast(3), multicast(5), unicast(6), arp(8), tcpData(9), tcpControl(10), udp(11), noTcpUdp(12), firstPriority(13), secondPriority(14), thirdPriority(15), forthPriority(16), allTraffic(17)  

genEquipEthernetSwitchQoSPolicerListCIR 1.3.6.1.4.1.2281.10.8.1.3.8.1.5
The CIR (Critical Information Rate) value (in Kbps)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSPolicerListCBS 1.3.6.1.4.1.2281.10.8.1.3.8.1.6
The CBS (Critical Burst Size) value (in Bytes)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSPolicerListRowStatus 1.3.6.1.4.1.2281.10.8.1.3.8.1.30
Row status of the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipEthernetSwitchQoSStaticMacTable 1.3.6.1.4.1.2281.10.8.1.3.9
Static MAC forwarding table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipEthernetSwitchQoSStaticMacEntry

genEquipEthernetSwitchQoSStaticMacEntry 1.3.6.1.4.1.2281.10.8.1.3.9.1
Static MAC forwarding table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipEthernetSwitchQoSStaticMacEntry  

genEquipEthernetSwitchQoSStaticMacId 1.3.6.1.4.1.2281.10.8.1.3.9.1.1
The index of the table
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSStaticMacAddr 1.3.6.1.4.1.2281.10.8.1.3.9.1.2
Static MAC Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

genEquipEthernetSwitchQoSStaticMacVlanId 1.3.6.1.4.1.2281.10.8.1.3.9.1.3
VLAN ID for this MAC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSStaticMacForwardTo 1.3.6.1.4.1.2281.10.8.1.3.9.1.4
The port number to be forwarded to, starting from 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSStaticMacPriority 1.3.6.1.4.1.2281.10.8.1.3.9.1.5
The priority to be given to this MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipEthernetSwitchQoSStaticMacRowStatus 1.3.6.1.4.1.2281.10.8.1.3.9.1.30
The row status of the operation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipProtocols 1.3.6.1.4.1.2281.10.8.1.6
OBJECT IDENTIFIER    

genEquipProtocolsMstp 1.3.6.1.4.1.2281.10.8.1.6.1
OBJECT IDENTIFIER    

genEquipProtocolsMstpGeneralAttributesTable 1.3.6.1.4.1.2281.10.8.1.6.1.1
A table containing NE configuration and maintenance attributes which are not part of the standard MIB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProtocolsMstpGeneralAttributesEntry

genEquipProtocolsMstpGeneralAttributesEntry 1.3.6.1.4.1.2281.10.8.1.6.1.1.1
A table containing NE configuration and maintenance attributes which are not part of the standard MIB.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProtocolsMstpGeneralAttributesEntry  

genEquipProtocolsMstpGeneralAttributesComponentId 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.1
Distinguished between multiple virtual bridge instances within a PB or PBB. In simple situations, i.e. single component the default is 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsMstpGeneralAttributesMstpEnabled 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.2
When set, MSTP protocol is enabled on NE
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrueFalse  

genEquipProtocolsMstpGeneralAttributesNumberOfinstances 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.3
Specifies number of instances supported. Value ranges from 2 to 16.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..16  

genEquipProtocolsMstpGeneralAttributesMigrateTime 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.4
When MSTP bridge detects the presence of STP data on one of its ports, it migrates after 'MigrateTime' has elapsed, if migrate is enabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsMstpGeneralAttributesBpduDestinationMAC 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.5
When set to 'customer', BPDU Dest MAC address should be set to 0x0180-C200-0000. Otherwise, BPDU Dest MAC address should be set to 0x0180-C200-0008
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER customer(0), provider(1)  

genEquipProtocolsMstpGeneralAttributesFrozen 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.6
When set, MSTP protocol stops running in NE., i.e. BPDU are neither processed nor transmitted. All ports states are maintained.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrueFalse  

genEquipProtocolsMstpGeneralAttributesSdHandling 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.7
When set to 'ignored', SD (Signal Degrade) failures are ignored in MSTP. Otherwise, SD failures are treated same as SF.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ignored(0), sameAsSF(1)  

genEquipProtocolsMstpGeneralAttributesReset 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.8
When set to reset, MSTP Protocol suit is reset
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(0), reset(1)  

genEquipProtocolsMstpGeneralAttributesResetCounters 1.3.6.1.4.1.2281.10.8.1.6.1.1.1.9
When set to reset, MSTP counters are reset
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(0), reset(1)  

genEquipProtocolsMstpCountersTable 1.3.6.1.4.1.2281.10.8.1.6.1.2
A table containing MSTP counters per instance per port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProtocolsMstpCountersEntry

genEquipProtocolsMstpCountersEntry 1.3.6.1.4.1.2281.10.8.1.6.1.2.1
A table containing MSTP counters per instance per port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProtocolsMstpCountersEntry  

genEquipProtocolsMstpCountersPortId 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.1
Port ID (ifIndex)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsMstpCountersNumberOfReceivedTCN 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.2
Number of received TCN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpdu 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.3
Number of received Configuration BPDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsMstpCountersNumberOfReceivedRstBpdu 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.4
Number of received RST BPDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsMstpCountersNumberOfReceivedMstBpdu 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.5
Number of received MST BPDU
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsMstpCountersNumberOfTransmittedTcnBpdu 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.6
Number Of Transmitted TCN BPDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpdu 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.7
Number of transmitted Configuration BPDU.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsMstpCountersNumberOfTransmittedRstBpdu 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.8
Number of transmitted RST BPDU
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsMstpCountersNumberOfTransmittedMstBpdu 1.3.6.1.4.1.2281.10.8.1.6.1.2.1.9
Number of transmitted MST BPDU
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoam 1.3.6.1.4.1.2281.10.8.1.6.2
OBJECT IDENTIFIER    

genEquipProtocolsEoamBwVsmTable 1.3.6.1.4.1.2281.10.8.1.6.2.1
A Table containing Ethernet OAM Configuration and Status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProtocolsEoamBwVsmEntry

genEquipProtocolsEoamBwVsmEntry 1.3.6.1.4.1.2281.10.8.1.6.2.1.1
A Table entry containing Ethernet OAM Configuration and Status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProtocolsEoamBwVsmEntry  

genEquipProtocolsEoamBwVsmName 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.1
Name of EOAM entity
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipProtocolsEoamBwVsmAdmin 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.2
Eoam Admin. Possible valuew: Up, Down
Status: mandatory Access: read-write
OBJECT-TYPE    
  Dot1CfmInterfaceStatus  

genEquipProtocolsEoamBwVsmPeriod 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.3
The interval of transmitting messages, when current nominal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmCurrentBw 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.4
The Current BW measure by 4 samples (with 250msec interval)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmControlIfindex 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.5
Control Interface of the eoam entity
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmId 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.6
EOAM index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmMonitoredIfindex 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.7
Monitored Interface of the eoam entity
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmHoldoff 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.8
The holdoff time in which, if BW below nominal, a message is sent
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmHoldoffStartTime 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.9
The holdoff start counting time
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmHoldoffState 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.10
The holdoff state of the EOAM entity
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmLastSentMsg 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.11
The last EOAM message transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

genEquipProtocolsEoamBwVsmMel 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.12
The MEL to be set in the bw-vsm messages
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmMonitoringInterval 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.13
The monitoring interval of the average BE calculation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmNominalBw 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.14
The nominal BW of the monitored interface, to be set in the bw-vsm messages
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmTxMsgCounter 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.15
The number of transmitted messages
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmVersion 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.16
EOAM version used
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmVlan 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.17
The VLAN to be set in the bw-vsm messages
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsEoamBwVsmResetMsgCounter 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.18
Reset Messages Counter
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipProtocolsEoamBwVsmRowStatus 1.3.6.1.4.1.2281.10.8.1.6.2.1.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipProtocolsG8032Erpi 1.3.6.1.4.1.2281.10.8.1.6.3
OBJECT IDENTIFIER    

genEquipProtocols8032DestMacAddress 1.3.6.1.4.1.2281.10.8.1.6.3.1
G8032 (Resiliency protocol) destination MAC address
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

genEquipProtocolsG8032NodeId 1.3.6.1.4.1.2281.10.8.1.6.3.2
G.8032 Node ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(10)  

genEquipProtocolsG8032ErpiAttributesTable 1.3.6.1.4.1.2281.10.8.1.6.3.10
A table containing ERPI attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProtocolsG8032ErpiAttributesEntry

genEquipProtocolsG8032ErpiAttributesEntry 1.3.6.1.4.1.2281.10.8.1.6.3.10.1
A table entry containing ERPI attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProtocolsG8032ErpiAttributesEntry  

genEquipProtocolsG8032ErpiAttributesErpiId 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.1
ERPI ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesErpiName 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.2
ERPI Name
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipProtocolsG8032ErpiAttributesGuardTime 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.3
Indicates the ERPI Guard Time; units are msec, steps are 10msec.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesHoldoffTime 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.4
The ERPI holdoff Time; units are msec, steps are 100msec. Controls the time from failure detection to responding to failure
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesLastChangeTs 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.5
Denotes the Timestamp of the last ring state machine transition
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesLastHpRequest 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.6
Describes the last high-priority request.
Status: mandatory Access: read-only
OBJECT-TYPE    
  G8032LastState  

genEquipProtocolsG8032ErpiAttributesLastLocalState 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.7
Describes the current local state that is input to the ERPI state machine
Status: mandatory Access: read-only
OBJECT-TYPE    
  G8032LastState  

genEquipProtocolsG8032ErpiAttributesLastRemoteState 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.8
Describes the last event received from the far end
Status: mandatory Access: read-only
OBJECT-TYPE    
  G8032LastState  

genEquipProtocolsG8032ErpiAttributesMegLevel 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.9
Indicates MEG LEVEL, when interoperating with SOAM
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesDownMep 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.10
Indicates if the ERPI is related to a down MEP and if to which one
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesRevertive 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.11
Indicates whether the ERPI is revertive
Status: mandatory Access: read-only
OBJECT-TYPE    
  IfMgrTrueFalse  

genEquipProtocolsG8032ErpiAttributesRingState 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.12
Describes the state in which id ERPI is assumed. Possible states are: Initializing, Idle, Pending, Protecting, FS, MS)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesRplOwner 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.13
Indicates whether the ERPI is RPL owner and if such, which ERPI Port is the owner
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), west(1), east(2), sub-ring(3)  

genEquipProtocolsG8032ErpiAttributesSdHandling 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.14
Indicates the ERPI takes into account SD (Signal Degraded) events (BER, capacity degradation)
Status: mandatory Access: read-write
OBJECT-TYPE    
  IfMgrTrueFalse  

genEquipProtocolsG8032ErpiAttributesServiceId 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.15
Indicates Service ID of the ERPI
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesErpiType 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.16
ERPI Type ( ring / sub-ring / ring with sub-ring port)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ring(0), sub-ring(1), ring-with-sub-ring(2)  

genEquipProtocolsG8032ErpiAttributesVersion 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.17
Indicates the ERPI version number used in the ERPI protocol
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesVirtualChannel 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.18
VLAN of virtual channel; 0 denotes no virtual channel
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesWtr 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.19
Indicates the ERPI WTR; units are minutes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiAttributesRowStatus 1.3.6.1.4.1.2281.10.8.1.6.3.10.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipProtocolsG8032ErpiPortAttributesTable 1.3.6.1.4.1.2281.10.8.1.6.3.11
A table containing ERP port attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProtocolsG8032ErpiPortAttributesEntry

genEquipProtocolsG8032ErpiPortAttributesEntry 1.3.6.1.4.1.2281.10.8.1.6.3.11.1
A table entry containing ERP port attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProtocolsG8032ErpiPortAttributesEntry  

genEquipProtocolsG8032ErpiPortAttributesErpiId 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.1
Denotes the ERPI ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesErpiIfindex 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.2
g8032_erp_port_sp_index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesActiveState 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.3
Denotes if G8032 port (SP) is active for traffic forwarding or not
Status: mandatory Access: read-only
OBJECT-TYPE    
  IfMgrTrueFalse  

genEquipProtocolsG8032ErpiPortAttributesDataFwdState 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.4
Specifies whether the port is forwarding or blocking data
Status: mandatory Access: read-only
OBJECT-TYPE    
  IfMgrTrueFalse  

genEquipProtocolsG8032ErpiPortAttributesDefectState 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.5
Defines the ERPI Port Oper-state derived from port. It is updates when Oper-state is changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-defect(0), sd-defect(1), sf-defect(2)  

genEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdState 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.6
Specifies whether the port is forwarding or blocking raps frames
Status: mandatory Access: read-only
OBJECT-TYPE    
  IfMgrTrueFalse  

genEquipProtocolsG8032ErpiPortAttributesRplLinkBlockState 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.7
Specifies whether the RPL is in blocking state. relevant only for RPL owner
Status: mandatory Access: read-only
OBJECT-TYPE    
  IfMgrTrueFalse  

genEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFrames 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.8
Number of invalid R-APS PDU received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesRxRapsEvents 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.9
Number of events R-APS PDU received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesRxRapsFrames 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.10
Number of R-APS PDU received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesFs 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.11
Number of FS PDU received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesMs 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.12
Number of MS PDU received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesNr 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.13
Number of NR R-APS PDU received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesRb 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.14
Number of RB R-APS PDU received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesSd 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.15
Number of SD R-APS PDU received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesSf 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.17
Number of SF R-APS PDU received
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThreshold 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.18
The capacity degradation threshold, in percentage, from which SD is indicated from this ERPI Port
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesSpId 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.19
Service Point ID
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesTxRapsCntrol 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.20
When value is False, R-APS are not transmitted by ERPI Port
Status: mandatory Access: read-only
OBJECT-TYPE    
  IfMgrTrueFalse  

genEquipProtocolsG8032ErpiPortAttributesTxRapsEvents 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.21
Number of events R-APS PDU transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesTxRapsFrames 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.22
Number of Total R-APS PDU transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesTxRapsFs 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.23
Number of FS R-APS PDU transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesTxRapsMs 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.24
Number of MS R-APS PDU transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesTxRapsNr 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.25
Number of NR R-APS PDU transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesTxRapsRb 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.26
Number of RB R-APS PDU transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesTxRapsSd 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.27
Number of SD R-APS PDU transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesTxRapsSf 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.28
Number of SF R-APS PDU transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesClearCommand 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.29
Clear Command
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesRowStatus 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.30
Table Mib Row Status
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipProtocolsG8032ErpiPortAttributesFsCommand 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.31
Force Switch (FS)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsG8032ErpiPortAttributesMsCommand 1.3.6.1.4.1.2281.10.8.1.6.3.11.1.32
Manual Switch (MS)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoam 1.3.6.1.4.1.2281.10.8.1.6.4
OBJECT IDENTIFIER    

genEquipProtocolsSoamMepTable 1.3.6.1.4.1.2281.10.8.1.6.4.10
A table containg MEP attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProtocolsSoamMepEntry

genEquipProtocolsSoamMepEntry 1.3.6.1.4.1.2281.10.8.1.6.4.10.1
A table entry containg MEP attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProtocolsSoamMepEntry  

genEquipProtocolsSoamMepMdIndex 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.1
MD Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoamMepMaIndex 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.2
MA/MEG Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoamMepMepIndentifier 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.3
MEP ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoamMepSpId 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.4
Service Point ID
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoamMepLastSessionLbmOut 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.5
Number of LBM frames transmitted during the current/last session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoamMepLastSessionlbmToSend 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.6
Number of LBM frames left to send in the session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoamMepLastSessionLbrIn 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.7
Number of LBR messages received during the current/last session
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoamMepLastSessionlbState 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.8
Specifies the loopback session State
Status: mandatory Access: read-only
OBJECT-TYPE    
  LBState  

genEquipProtocolsSoamMepLbmOut 1.3.6.1.4.1.2281.10.8.1.6.4.10.1.9
Specifies the mumber of the LBM frames transmitted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoamMegTable 1.3.6.1.4.1.2281.10.8.1.6.4.11
A table containing SOAM MA/MEG network identical attributes common to 802.1ag.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProtocolsSoamMegEntry

genEquipProtocolsSoamMegEntry 1.3.6.1.4.1.2281.10.8.1.6.4.11.1
A table entry containing SOAM MA/MEG network identical attributes common to 802.1ag.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProtocolsSoamMegEntry  

genEquipProtocolsSoamMegMdIndex 1.3.6.1.4.1.2281.10.8.1.6.4.11.1.1
MD Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoamMegMaIndex 1.3.6.1.4.1.2281.10.8.1.6.4.11.1.2
MA/MEG Index
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipProtocolsSoamMegServiceId 1.3.6.1.4.1.2281.10.8.1.6.4.11.1.3
Service ID
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrails 1.3.6.1.4.1.2281.10.8.2
OBJECT IDENTIFIER    

genEquipTdmTrailsTable 1.3.6.1.4.1.2281.10.8.2.1
TDM Trails configuration and status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTdmTrailsEntry

genEquipTdmTrailsEntry 1.3.6.1.4.1.2281.10.8.2.1.1
TDM Trails PM table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTdmTrailsEntry  

genEquipTdmTrailID 1.3.6.1.4.1.2281.10.8.2.1.1.1
The Trail ID. This parameter is the index of the table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipTdmTrailDescr 1.3.6.1.4.1.2281.10.8.2.1.1.2
Trail description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipTdmTrailProtected 1.3.6.1.4.1.2281.10.8.2.1.1.3
This parameter indicates whether the trail is protected or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unProtected(0), protected(1), protectedAbr(2)  

genEquipTdmTrailAcmPrio 1.3.6.1.4.1.2281.10.8.2.1.1.4
The ACM priority of the trail. In case of High priority TDM trail, ACM is enabled on the link and there is a reduction of the link capacity, this trail will be prioritized before the low priority trails to be dropped.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER low(0), high(1)  

genEquipTdmTrailOperStatus 1.3.6.1.4.1.2281.10.8.2.1.1.5
The status of the TDM trail. in operational case, the trail is active/enabled and send alarms.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reserved(0), operational(1)  

genEquipTdmTrailAlarmStatus 1.3.6.1.4.1.2281.10.8.2.1.1.6
The alarm status of the trail active path. The value is a Bit Map: Id-Mismatch(0x01), Excessive-Ber(0x02), Signal-Degrade-Ber(0x04), Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrailSrcSlot 1.3.6.1.4.1.2281.10.8.2.1.1.7
Trail source slot number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrailSrcType 1.3.6.1.4.1.2281.10.8.2.1.1.8
The type of the source interface of the trail line(0), radio(1),stm-1-oc-3(2), sync(4).
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrailIfType  

genEquipTdmTrailSrcNum 1.3.6.1.4.1.2281.10.8.2.1.1.9
The interface number, for example E1 number 5. in case of a line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrailDest1Slot 1.3.6.1.4.1.2281.10.8.2.1.1.10
The slot destination of the trail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrailDest1Type 1.3.6.1.4.1.2281.10.8.2.1.1.11
The interface type destination of the trail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrailIfType  

genEquipTdmTrailDest1Num 1.3.6.1.4.1.2281.10.8.2.1.1.12
The destination interface number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrailDest2Slot 1.3.6.1.4.1.2281.10.8.2.1.1.13
A secondary slot number that is being used when protection is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrailDest2Type 1.3.6.1.4.1.2281.10.8.2.1.1.14
A secondary interface type that is being used when protection is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrailIfType  

genEquipTdmTrailDest2Num 1.3.6.1.4.1.2281.10.8.2.1.1.15
A secondary interface number that is being used when protection is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrailProtectedForceActive 1.3.6.1.4.1.2281.10.8.2.1.1.16
Force active of the primary or the secondary trails.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrailProtectedType  

genEquipTdmTrailProtectedActiveTrail 1.3.6.1.4.1.2281.10.8.2.1.1.17
The trail current active path. That tells us Who is the active trail.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TrailProtectedType  

genEquipTdmTrailProtectedNumOfSwitches 1.3.6.1.4.1.2281.10.8.2.1.1.18
The value represent the number of switches in SNCP between the primary and secondary trails. Setting this value to 0, clears this counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrailPrimaryPathAlarmStatus 1.3.6.1.4.1.2281.10.8.2.1.1.19
The alarm status of the trail primary path. The value is a Bit Map: Id-Mismatch(0x01), Excessive-Ber(0x02), Signal-Degrade-Ber(0x04), Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrailSecondaryPathAlarmStatus 1.3.6.1.4.1.2281.10.8.2.1.1.20
The alarm status of the trail secondary path. The value is a Bit Map: Id-Mismatch(0x01), Excessive-Ber(0x02), Signal-Degrade-Ber(0x04), Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipTdmTrailRowStatus 1.3.6.1.4.1.2281.10.8.2.1.1.30
The Row status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipTdmTrailsProtectedForceActiveAllCmd 1.3.6.1.4.1.2281.10.8.2.2
Force all active trails to be either primary or secondary.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrailProtectedType  

genEquipTdmTrailsProtectedForceOperationalOrReservedCmd 1.3.6.1.4.1.2281.10.8.2.3
Force all active trails to be either operational or reserved.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER reserved(0), operational(1), idle(30)  

genEquipTdmTrailsProtectedRevertiveSwitchTimeout 1.3.6.1.4.1.2281.10.8.2.4
The revertive switch timeout in seconds for revertive protected trails.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1800  

genEquipTdmTrailsSwitchCounterClear 1.3.6.1.4.1.2281.10.8.2.5
This parameter will clear the counter for protected switches.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipTdmTrailsDeleteAllTrails 1.3.6.1.4.1.2281.10.8.2.6
This parameter will delete all existing trails.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipSynchronization 1.3.6.1.4.1.2281.10.8.3
OBJECT IDENTIFIER    

genEquipSynchronizationSrcTable 1.3.6.1.4.1.2281.10.8.3.1
Synchronization source table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipSynchronizationSrcEntry

genEquipSynchronizationSrcEntry 1.3.6.1.4.1.2281.10.8.3.1.1
Synchronization source table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipSynchronizationSrcEntry  

genEquipSynchronizationSrcPriority 1.3.6.1.4.1.2281.10.8.3.1.1.1
The source for system synchronization (primary, seconday).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

genEquipSynchronizationSrcSlot 1.3.6.1.4.1.2281.10.8.3.1.1.2
The slot number of the sync source (1..6). Possible values: - standalone(0) - slot1(1) - slot2(2) - slot3(3) - slot4(4) - slot5(5) - slot6(6)
Status: mandatory Access: read-write
OBJECT-TYPE    
  SlotId  

genEquipSynchronizationSrcType 1.3.6.1.4.1.2281.10.8.3.1.1.3
The interface type (line (PDH), Radio, STM-1/OC-3), or signal coming from the PW card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unknown(-1), line(0), radio-ch(1), stm-vc(2), pw(3), stm-signal(4), ether(5), pw-reference-clock(6)  

genEquipSynchronizationSrcNum 1.3.6.1.4.1.2281.10.8.3.1.1.4
The sync source number: VC in STM-1/OC-3, Radio channel in case the interface is Radio, or E1 number in case the interface is PDH (E1s).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationSrcValid 1.3.6.1.4.1.2281.10.8.3.1.1.5
This paremter is the source status, if the source if valid or not. In case it is valid, it means that the clock being extracted from the source is ok and can be used. In case it is not-valid the source is not in use, each interface will have it's own clock.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-valid(0), valid(1)  

genEquipSynchronizationSrcTrail 1.3.6.1.4.1.2281.10.8.3.1.1.6
This parameter indicates whether the synchronization source is the signal of an existing co-located TDM trail used for traffic. Enabling this parameter in an interface which does not belong to a trail will fail, as well as disabling it for an interface which belongs to a trail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipSynchronizationSrcAdmin 1.3.6.1.4.1.2281.10.8.3.1.1.7
Admin state of the sync source (the sync source is enabled or disabled).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipSynchronizationSrcQuality 1.3.6.1.4.1.2281.10.8.3.1.1.8
parameter configures the quality of the incoming clock signal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(0), prs(1), g811(2), transit-node(3), ssu-a(4), unknown(5), stratum2(7), ssu-b(8), stratum3(10), g813-8262(11), smc(12), stratum3e(13), do-not-use(15)  

genEquipSynchronizationSrcReceivedSSM 1.3.6.1.4.1.2281.10.8.3.1.1.9
This parameter shows the current value of the received SSM messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationSrcQualityStatus 1.3.6.1.4.1.2281.10.8.3.1.1.10
This parameter shows the current quality level of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER automatic(0), prs(1), g811(2), transit-node(3), ssu-a(4), unknown(5), stratum2(7), ssu-b(8), stratum3(10), g813-8262(11), smc(12), stratum3e(13), do-not-use(15), failure(16)  

genEquipServicesPW 1.3.6.1.4.1.2281.10.8.4
OBJECT IDENTIFIER    

genEquipServicesPWBundlesTable 1.3.6.1.4.1.2281.10.8.4.1
This table allows configuration of DS0 bundles. Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescriptionTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesPWBundlesEntry

genEquipServicesPWBundlesEntry 1.3.6.1.4.1.2281.10.8.4.1.1
This table allows configuration of DS0 bundles. Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescriptionTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesPWBundlesEntry  

genEquipServicesPWBundlesBundleId 1.3.6.1.4.1.2281.10.8.4.1.1.1
Unique DS0 bundle ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..496  

genEquipServicesPWBundlesDs0List 1.3.6.1.4.1.2281.10.8.4.1.1.2
DS0 slot number belonging to a bundle.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesPWBundlesRowStatus 1.3.6.1.4.1.2281.10.8.4.1.1.30
This value is the status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesPWBundlesDescriptionTable 1.3.6.1.4.1.2281.10.8.4.2
This table allows configuration of DS0 bundles description. Notice that the bundle configuration itself is not located in this table but in table genEquipServicesPWBundlesTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesPWBundlesDescriptionEntry

genEquipServicesPWBundlesDescriptionEntry 1.3.6.1.4.1.2281.10.8.4.2.1
This table allows configuration of DS0 bundles description. Notice that the bundle configuration itself is not located in this table but in table genEquipServicesPWBundlesTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesPWBundlesDescriptionEntry  

genEquipServicesPWBundlesDescriptionBundleId 1.3.6.1.4.1.2281.10.8.4.2.1.1
Unique DS0 bundle ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..496  

genEquipServicesPWBundlesDescriptionBundleDesc 1.3.6.1.4.1.2281.10.8.4.2.1.2
DS0 bundle description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipServicesPWBundlesDescriptionBundleAdmin 1.3.6.1.4.1.2281.10.8.4.2.1.3
Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesPWBundlesDescriptionBundleOperStatus 1.3.6.1.4.1.2281.10.8.4.2.1.4
Operational status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

genEquipServicesPWBundlesDescriptionBundleTdmPort 1.3.6.1.4.1.2281.10.8.4.2.1.5
TDM port from which the channels are assigned to the bundle.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

genEquipServicesPWBundlesDescriptionRowStatus 1.3.6.1.4.1.2281.10.8.4.2.1.30
This value is the status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesPWPSNTunnelsTable 1.3.6.1.4.1.2281.10.8.4.3
This table allows configuration of PSN encapsulations meant for pseudowire services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesPWPSNTunnelsEntry

genEquipServicesPWPSNTunnelsEntry 1.3.6.1.4.1.2281.10.8.4.3.1
This table allows configuration of PSN encapsulations meant for pseudowire services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesPWPSNTunnelsEntry  

genEquipServicesPWPSNTunnelsSlotNumber 1.3.6.1.4.1.2281.10.8.4.3.1.1
Slot number where the relevant PW card is inserted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..12  

genEquipServicesPWPSNTunnelsTunnelId 1.3.6.1.4.1.2281.10.8.4.3.1.2
PSN tunnel ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..512  

genEquipServicesPWPSNTunnelsPsnType 1.3.6.1.4.1.2281.10.8.4.3.1.3
Psn type supported by this tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER udpip(0), ethernet(1)  

genEquipServicesPWPSNTunnelsSVid 1.3.6.1.4.1.2281.10.8.4.3.1.4
PSN Tunnel S-VLAN Id.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4091  

genEquipServicesPWPSNTunnelsCVid 1.3.6.1.4.1.2281.10.8.4.3.1.5
PSN Tunnel C-VLAN Id.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4091  

genEquipServicesPWPSNTunnelsPBits 1.3.6.1.4.1.2281.10.8.4.3.1.6
PSN Tunnel P-bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipServicesPWPSNTunnelsDestIpAddr 1.3.6.1.4.1.2281.10.8.4.3.1.7
Destination IP Address for UDP/IP PSN tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipServicesPWPSNTunnelsDestIpSubnet 1.3.6.1.4.1.2281.10.8.4.3.1.8
Destination IP Subnet for UDP/IP PSN tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipServicesPWPSNTunnelsNextHopIp 1.3.6.1.4.1.2281.10.8.4.3.1.9
Next hop IP Address for UDP/IP PSN tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipServicesPWPSNTunnelsTosDscp 1.3.6.1.4.1.2281.10.8.4.3.1.10
PSN Tunnel ToS (DSCP).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

genEquipServicesPWPSNTunnelsRemoteMacAddr 1.3.6.1.4.1.2281.10.8.4.3.1.11
Remote MAC Adress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

genEquipServicesPWPSNTunnelsSourceIpAddr 1.3.6.1.4.1.2281.10.8.4.3.1.12
Source IP Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipServicesPWPSNTunnelsSourceMacAddr 1.3.6.1.4.1.2281.10.8.4.3.1.13
Source MAC Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

genEquipServicesPWPSNTunnelsStatus 1.3.6.1.4.1.2281.10.8.4.3.1.14
PSN tunnel admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DownUp  

genEquipServicesPWPSNTunnelsSourceMPLSLabel 1.3.6.1.4.1.2281.10.8.4.3.1.15
Source MPLS Label.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..1048575  

genEquipServicesPWPSNTunnelsDestinationMPLSLabel 1.3.6.1.4.1.2281.10.8.4.3.1.16
Destination MPLS label.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..1048575  

genEquipServicesPWPSNTunnelsMPLSexp 1.3.6.1.4.1.2281.10.8.4.3.1.17
MPLS Experimental field.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipServicesPWPSNTunnelsVlanType 1.3.6.1.4.1.2281.10.8.4.3.1.18
VLAN type supported by this PSN tunnel (S-VLAN or C-VLAN).
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWTunnelVlanType  

genEquipServicesPWPSNTunnelsVid 1.3.6.1.4.1.2281.10.8.4.3.1.19
PSN Tunnel VLAN ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4094  

genEquipServicesPWPSNTunnelsMAid 1.3.6.1.4.1.2281.10.8.4.3.1.20
Maintenance Association Id.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

genEquipServicesPWPSNTunnelsRowStatus 1.3.6.1.4.1.2281.10.8.4.3.1.30
This value is the status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesPWProfilesTable 1.3.6.1.4.1.2281.10.8.4.4
This table allows configuration of pseudowire profiles. These profiles are used when configuring PW services in table genEquipServicesPWServiceTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesPWProfilesEntry

genEquipServicesPWProfilesEntry 1.3.6.1.4.1.2281.10.8.4.4.1
This table allows configuration of pseudowire profiles. These profiles are used when configuring PW services in table genEquipServicesPWServiceTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesPWProfilesEntry  

genEquipServicesPWProfilesPWProfileId 1.3.6.1.4.1.2281.10.8.4.4.1.1
Unique PW profile ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

genEquipServicesPWProfilesPayloadSize 1.3.6.1.4.1.2281.10.8.4.4.1.2
Payload size in bytes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1500  

genEquipServicesPWProfilesJitterBufferDepth 1.3.6.1.4.1.2281.10.8.4.4.1.3
Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

genEquipServicesPWProfilesLopsDetection 1.3.6.1.4.1.2281.10.8.4.4.1.4
If enabled, LOPS detection is supported.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesPWProfilesRtpHeaderUsed 1.3.6.1.4.1.2281.10.8.4.4.1.5
If set to False: an RTP header is not pre-pended to the TDM packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipServicesPWProfilesRtpTimestampMode 1.3.6.1.4.1.2281.10.8.4.4.1.6
RTP timestamp mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWRtpTimeStampMode  

genEquipServicesPWProfilesRtpTimestampAbsFactor 1.3.6.1.4.1.2281.10.8.4.4.1.7
Multiplication factor for 8KHz units in absolute mode of RTP timestamping.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipServicesPWProfilesPayloadSuppression 1.3.6.1.4.1.2281.10.8.4.4.1.8
Payload suppression.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesPWProfilesPayloadType 1.3.6.1.4.1.2281.10.8.4.4.1.9
Payload type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..123  

genEquipServicesPWProfilesConseqPacketsInSync 1.3.6.1.4.1.2281.10.8.4.4.1.10
Number of consecutive packets with sequential sequence numbers required to exit LOPS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

genEquipServicesPWProfilesConseqMissPktsOutSync 1.3.6.1.4.1.2281.10.8.4.4.1.11
Number of consecutive missing packets required to enter LOPS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

genEquipServicesPWProfilesPktLossTimeWindow 1.3.6.1.4.1.2281.10.8.4.4.1.12
Time for computing average packet loss rate to detect excessive packet loss.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipServicesPWProfilesExcessivePktLossThresh 1.3.6.1.4.1.2281.10.8.4.4.1.13
Alarm threshold (in percent) for excessive packet loss.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

genEquipServicesPWProfilesAlarmThresh 1.3.6.1.4.1.2281.10.8.4.4.1.14
Delay (in msecs) for persistent alarm setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipServicesPWProfilesClearAlarmThresh 1.3.6.1.4.1.2281.10.8.4.4.1.15
Delay (in msecs) for persistent alarm clearing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipServicesPWProfilesMissingPktsToSes 1.3.6.1.4.1.2281.10.8.4.4.1.16
Percent of missing packets detected in 1 second window to cause SES to be counted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

genEquipServicesPWProfilesDs0Filler 1.3.6.1.4.1.2281.10.8.4.4.1.17
Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

genEquipServicesPWProfilesCasAlarmPattern 1.3.6.1.4.1.2281.10.8.4.4.1.18
CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

genEquipServicesPWProfilesRowStatus 1.3.6.1.4.1.2281.10.8.4.4.1.30
This value is the status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesPWServiceTable 1.3.6.1.4.1.2281.10.8.4.5
This table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels, and profiles to a service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesPWServiceEntry

genEquipServicesPWServiceEntry 1.3.6.1.4.1.2281.10.8.4.5.1
This table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels, and profiles to a service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesPWServiceEntry  

genEquipServicesPWServicePWId 1.3.6.1.4.1.2281.10.8.4.5.1.1
Pseudo Wire ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesPWServicePWType 1.3.6.1.4.1.2281.10.8.4.5.1.2
PW type. E1-satop denotes SAToP. Cespsn Denotes CESoP without CAS signalling, and cas-cespsn denotes CESoP with CAS signalling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e1-satop(0), cespsn(1), cas-cespsn(2)  

genEquipServicesPWServicePsnType 1.3.6.1.4.1.2281.10.8.4.5.1.3
PSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER udpip(0), eth(1)  

genEquipServicesPWServiceTdmPort 1.3.6.1.4.1.2281.10.8.4.5.1.4
Number of TDM port (for SATOP). This parameter must be zero for CESoP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesPWServiceDs0bundle 1.3.6.1.4.1.2281.10.8.4.5.1.5
Number DS0 bundle (for CESoPSN). This parameter must be zero for SAToP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..496  

genEquipServicesPWServiceTdmProfileId 1.3.6.1.4.1.2281.10.8.4.5.1.6
TDM configuration profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..64  

genEquipServicesPWServicePsnTunnelProtection 1.3.6.1.4.1.2281.10.8.4.5.1.7
PSN tunnel protection mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesPWServicePsnTunnelOrGroupId 1.3.6.1.4.1.2281.10.8.4.5.1.8
PSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..512  

genEquipServicesPWServiceSrcUdpPortOrEcid 1.3.6.1.4.1.2281.10.8.4.5.1.9
Source UDP Port for UDP IP tunnel or ECID for Ethernet tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipServicesPWServiceDstUdpPortOrEcid 1.3.6.1.4.1.2281.10.8.4.5.1.10
Destination UDP Port for UDP IP tunnel or ECID for Ethernet tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipServicesPWServiceAdmin 1.3.6.1.4.1.2281.10.8.4.5.1.11
Admin status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesPWServiceCrReference 1.3.6.1.4.1.2281.10.8.4.5.1.12
Clock recovery reference.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesPWServiceOperStatus 1.3.6.1.4.1.2281.10.8.4.5.1.13
Operational status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnableDisable  

genEquipServicesPWServiceRowStatus 1.3.6.1.4.1.2281.10.8.4.5.1.30
This value is the status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesNGPW 1.3.6.1.4.1.2281.10.8.4.6
OBJECT IDENTIFIER    

genEquipServicesNGPWBundlesTable 1.3.6.1.4.1.2281.10.8.4.6.1
This table allows definition of the group of timeslots comprising a bundle.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWBundlesEntry

genEquipServicesNGPWBundlesEntry 1.3.6.1.4.1.2281.10.8.4.6.1.1
This table entry allows definition of the group of timeslots comprising a bundle.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWBundlesEntry  

genEquipServicesNGPWBundlesSlotId 1.3.6.1.4.1.2281.10.8.4.6.1.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

genEquipServicesNGPWBundlesTdmPort 1.3.6.1.4.1.2281.10.8.4.6.1.1.2
TDM Port number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

genEquipServicesNGPWBundlesDs0List 1.3.6.1.4.1.2281.10.8.4.6.1.1.3
Timeslot number to be included in a bundle.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWBundlesIfIndex 1.3.6.1.4.1.2281.10.8.4.6.1.1.4
iIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWBundlesBundleId 1.3.6.1.4.1.2281.10.8.4.6.1.1.5
Bundle ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWBundlesRowStatus 1.3.6.1.4.1.2281.10.8.4.6.1.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesNGPWBundlesDescriptionTable 1.3.6.1.4.1.2281.10.8.4.6.2
This table allows configuring admin state and description for bundles.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWBundlesDescriptionEntry

genEquipServicesNGPWBundlesDescriptionEntry 1.3.6.1.4.1.2281.10.8.4.6.2.1
This table entry allows configuring admin state and description for bundles.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWBundlesDescriptionEntry  

genEquipServicesNGPWBundlesDescriptionSlotId 1.3.6.1.4.1.2281.10.8.4.6.2.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

genEquipServicesNGPWBundlesDescriptionBundleId 1.3.6.1.4.1.2281.10.8.4.6.2.1.2
Bundle ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesNGPWBundlesDescriptionAdmin 1.3.6.1.4.1.2281.10.8.4.6.2.1.3
Bundle administrative state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWBundlesDescriptionBundleDesc 1.3.6.1.4.1.2281.10.8.4.6.2.1.4
Bundle description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipServicesNGPWBundlesDescriptionRowStatus 1.3.6.1.4.1.2281.10.8.4.6.2.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesNGPWProfilesTable 1.3.6.1.4.1.2281.10.8.4.6.3
This table allows configuration of PW service profiles.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWProfilesEntry

genEquipServicesNGPWProfilesEntry 1.3.6.1.4.1.2281.10.8.4.6.3.1
This table entry allows configuration of PW service profiles.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWProfilesEntry  

genEquipServicesNGPWProfilesPWProfileId 1.3.6.1.4.1.2281.10.8.4.6.3.1.1
Unique PW profile ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

genEquipServicesNGPWProfilesPayloadSize 1.3.6.1.4.1.2281.10.8.4.6.3.1.2
Payload size, in terms of TDM frames in each packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWProfilesJitterBufferDepth 1.3.6.1.4.1.2281.10.8.4.6.3.1.3
Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

genEquipServicesNGPWProfilesPayloadSuppression 1.3.6.1.4.1.2281.10.8.4.6.3.1.4
When enabled, payload is suppresed upon incoming TDM failure.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWProfilesPayloadType 1.3.6.1.4.1.2281.10.8.4.6.3.1.5
Payload type byte.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWProfilesDs0Filler 1.3.6.1.4.1.2281.10.8.4.6.3.1.6
Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

genEquipServicesNGPWProfilesCasAlarmPattern 1.3.6.1.4.1.2281.10.8.4.6.3.1.7
CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

genEquipServicesNGPWProfilesRtpHeaderUsed 1.3.6.1.4.1.2281.10.8.4.6.3.1.8
If set to False: an RTP header is not pre-pended to the TDM packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWProfilesRtpTimestampMode 1.3.6.1.4.1.2281.10.8.4.6.3.1.9
RTP timestamp mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWRtpTimeStampMode  

genEquipServicesNGPWProfilesRtpTimestampAbsFactor 1.3.6.1.4.1.2281.10.8.4.6.3.1.10
Multiplication factor for 8KHz units in absolute mode of RTP timestamping.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipServicesNGPWProfilesLopsDetection 1.3.6.1.4.1.2281.10.8.4.6.3.1.11
Timeout for TDM ports loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWProfilesConseqPacketsInSync 1.3.6.1.4.1.2281.10.8.4.6.3.1.12
Number of consecutive packets with sequential sequence numbers required to exit LOPS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

genEquipServicesNGPWProfilesConseqMissPktsOutSync 1.3.6.1.4.1.2281.10.8.4.6.3.1.13
Number of consecutive missing packets required to enter LOPS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

genEquipServicesNGPWProfilesPktLossTimeWindow 1.3.6.1.4.1.2281.10.8.4.6.3.1.14
Time for computing average packet loss rate to detect excessive packet loss.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipServicesNGPWProfilesExcessivePktLossThresh 1.3.6.1.4.1.2281.10.8.4.6.3.1.15
Alarm threshold (in percent) for excessive packet loss.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..500  

genEquipServicesNGPWProfilesAlarmThresh 1.3.6.1.4.1.2281.10.8.4.6.3.1.16
Delay (in msecs) for persistent alarm setting.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipServicesNGPWProfilesClearAlarmThresh 1.3.6.1.4.1.2281.10.8.4.6.3.1.17
Delay (in msecs) for persistent alarm clearing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

genEquipServicesNGPWProfilesMissingPktsToSes 1.3.6.1.4.1.2281.10.8.4.6.3.1.18
TPercent of missing packets detected in 1 second window to cause SES to be counted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

genEquipServicesNGPWProfilesRowStatus 1.3.6.1.4.1.2281.10.8.4.6.3.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesNGPWPSNTunnelsTable 1.3.6.1.4.1.2281.10.8.4.6.4
This table allows configuration of PSN tunnel encapsulations for PW services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWPSNTunnelsEntry

genEquipServicesNGPWPSNTunnelsEntry 1.3.6.1.4.1.2281.10.8.4.6.4.1
This table entry allows configuration of PSN tunnel encapsulations for PW services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWPSNTunnelsEntry  

genEquipServicesNGPWPSNTunnelsSlotID 1.3.6.1.4.1.2281.10.8.4.6.4.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

genEquipServicesNGPWPSNTunnelsTunnelId 1.3.6.1.4.1.2281.10.8.4.6.4.1.2
PSN Tunnel ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

genEquipServicesNGPWPSNTunnelsAdmin 1.3.6.1.4.1.2281.10.8.4.6.4.1.3
Payload type byte.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWPSNTunnelsPsnType 1.3.6.1.4.1.2281.10.8.4.6.4.1.4
PSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWTunnelPsnType  

genEquipServicesNGPWPSNTunnelsDestIpAddr 1.3.6.1.4.1.2281.10.8.4.6.4.1.5
Destination IP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipServicesNGPWPSNTunnelsNextHopIp 1.3.6.1.4.1.2281.10.8.4.6.4.1.6
Next hop IP Address for UDP/IP PSN tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipServicesNGPWPSNTunnelsTosDscp 1.3.6.1.4.1.2281.10.8.4.6.4.1.7
PSN Tunnel ToS (DSCP).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

genEquipServicesNGPWPSNTunnelsRemoteMacAddr 1.3.6.1.4.1.2281.10.8.4.6.4.1.8
Remote MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(6)  

genEquipServicesNGPWPSNTunnelsSourceMPLSLabel 1.3.6.1.4.1.2281.10.8.4.6.4.1.9
Source MPLS Label.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWPSNTunnelsDestinationMPLSLabel 1.3.6.1.4.1.2281.10.8.4.6.4.1.10
Destination MPLS label.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWPSNTunnelsMPLSexp 1.3.6.1.4.1.2281.10.8.4.6.4.1.11
MPLS Experimental field.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipServicesNGPWPSNTunnelsVlanType 1.3.6.1.4.1.2281.10.8.4.6.4.1.12
VLAN type supported by this PSN tunnel (S-VLAN or C-VLAN).
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWTunnelVlanType  

genEquipServicesNGPWPSNTunnelsVid 1.3.6.1.4.1.2281.10.8.4.6.4.1.13
PSN Tunnel VLAN ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4090  

genEquipServicesNGPWPSNTunnelsPBits 1.3.6.1.4.1.2281.10.8.4.6.4.1.14
PSN Tunnel P-bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..7  

genEquipServicesNGPWPSNTunnelsMaId 1.3.6.1.4.1.2281.10.8.4.6.4.1.15
Maintenance Association ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWPSNTunnelsTDMDefectPropagation 1.3.6.1.4.1.2281.10.8.4.6.4.1.16
TDM defect propagation to SOAM. Enable for dual homing configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWPSNTunnelsRowStatus 1.3.6.1.4.1.2281.10.8.4.6.4.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesNGPWServiceTable 1.3.6.1.4.1.2281.10.8.4.6.5
This table allows definition of PW services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWServiceEntry

genEquipServicesNGPWServiceEntry 1.3.6.1.4.1.2281.10.8.4.6.5.1
This table entry allows definition of PW services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWServiceEntry  

genEquipServicesNGPWServiceSlotID 1.3.6.1.4.1.2281.10.8.4.6.5.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

genEquipServicesNGPWServicePWId 1.3.6.1.4.1.2281.10.8.4.6.5.1.2
Pseudowire ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

genEquipServicesNGPWServiceAdmin 1.3.6.1.4.1.2281.10.8.4.6.5.1.3
Administrative status of this PW service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWServicePWType 1.3.6.1.4.1.2281.10.8.4.6.5.1.4
Indicates the emulated service to be carried over the PW service (SAToP, CESoP, CESoP with PSN).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER satop(0), cespsn(1), cas-cespsn(2)  

genEquipServicesNGPWServicePsnType 1.3.6.1.4.1.2281.10.8.4.6.5.1.5
Indicates the PSN type that the PW service will use over the network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWTunnelPsnType  

genEquipServicesNGPWServiceDs0bundle 1.3.6.1.4.1.2281.10.8.4.6.5.1.6
Number DS0 bundle (for CESoPSN). This parameter must be zero for SAToP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesNGPWServiceTdmProfileId 1.3.6.1.4.1.2281.10.8.4.6.5.1.7
Indicates the PW profile id for this PW service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..64  

genEquipServicesNGPWServiceTunnel 1.3.6.1.4.1.2281.10.8.4.6.5.1.8
PSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

genEquipServicesNGPWServiceCrReference 1.3.6.1.4.1.2281.10.8.4.6.5.1.9
Whether this PW may be used as a reference for clock recovery.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipServicesNGPWServiceSrcPsnId 1.3.6.1.4.1.2281.10.8.4.6.5.1.10
Source UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWServiceDstPsnId 1.3.6.1.4.1.2281.10.8.4.6.5.1.11
Destination UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWServicePsnTunnelProtection 1.3.6.1.4.1.2281.10.8.4.6.5.1.12
Indicates whether this PW service is PSN protected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(0)  

genEquipServicesNGPWServiceRowStatus 1.3.6.1.4.1.2281.10.8.4.6.5.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesNGPWTDMPortsTable 1.3.6.1.4.1.2281.10.8.4.6.6
This table allows configuration of TDM ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWTDMPortsEntry

genEquipServicesNGPWTDMPortsEntry 1.3.6.1.4.1.2281.10.8.4.6.6.1
This table entry allows configuration of TDM ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWTDMPortsEntry  

genEquipServicesNGPWTDMPortsSlotID 1.3.6.1.4.1.2281.10.8.4.6.6.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

genEquipServicesNGPWTDMPortsPort 1.3.6.1.4.1.2281.10.8.4.6.6.1.2
Physical port number in the card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

genEquipServicesNGPWTDMPortsIfIndex 1.3.6.1.4.1.2281.10.8.4.6.6.1.3
ifIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWTDMPortsAdmin 1.3.6.1.4.1.2281.10.8.4.6.6.1.4
TDM port administrative state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWTDMPortsLineType 1.3.6.1.4.1.2281.10.8.4.6.6.1.5
Line type of this TDM port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e1Unframed(0), e1(1), e1-crc(2), e1-mf(3), e1-mf-crc(4), ds1-d4(5), ds1-esf(6)  

genEquipServicesNGPWTDMPortsLineCoding 1.3.6.1.4.1.2281.10.8.4.6.6.1.6
Line coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1. AMI is only for T1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER hdb3-b8zs(0), ami(1)  

genEquipServicesNGPWTDMPortsChannelization 1.3.6.1.4.1.2281.10.8.4.6.6.1.7
Indication whether this TDM port is channelized into DS0s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWTDMPortsTimingMode 1.3.6.1.4.1.2281.10.8.4.6.6.1.8
Clock reference for the outgoing TDM signal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER loop(0), absolute(1), clock-recovery(2)  

genEquipServicesNGPWTDMPortsClockSourceRef 1.3.6.1.4.1.2281.10.8.4.6.6.1.9
Clock source reference for Absolute clock mode. ???none??? - for loop or clock-recovery timing modes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), front-panel(1), sys-ref(2)  

genEquipServicesNGPWTDMPortsClkSrcRefPort 1.3.6.1.4.1.2281.10.8.4.6.6.1.10
TDM port serving as a clock reference for loop or clock-recovery timing modes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

genEquipServicesNGPWTDMPortsIdleCode 1.3.6.1.4.1.2281.10.8.4.6.6.1.11
Value to be transmitted on this TDM port in unused timeslots.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWTDMPortsCableLength 1.3.6.1.4.1.2281.10.8.4.6.6.1.12
Cable length for this port. The value fixed-or-0-133ft means fixed for E1 (the only valid value) and 0-133ft for T1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fixed-or-0-133ft(0), len-133-266ft(1), len-266-399ft(2), len-399-533ft(3), len-533-655ft(4)  

genEquipServicesNGPWTDMPortsLoopback 1.3.6.1.4.1.2281.10.8.4.6.6.1.13
Type of required loopback on this TDM port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TDMLoopbackType  

genEquipServicesNGPWPSNTunnelsStatusTable 1.3.6.1.4.1.2281.10.8.4.6.7
This table contains status and information about existing PSN tunnels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWPSNTunnelsStatusEntry

genEquipServicesNGPWPSNTunnelsStatusEntry 1.3.6.1.4.1.2281.10.8.4.6.7.1
This table entry contains status and information about existing PSN tunnels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWPSNTunnelsStatusEntry  

genEquipServicesNGPWPSNTunnelsStatusSlotID 1.3.6.1.4.1.2281.10.8.4.6.7.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

genEquipServicesNGPWPSNTunnelsStatusTunnelId 1.3.6.1.4.1.2281.10.8.4.6.7.1.2
PSN Tunnel ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

genEquipServicesNGPWPSNTunnelsStatusOperStatus 1.3.6.1.4.1.2281.10.8.4.6.7.1.3
PSN tunnel operational state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipServicesNGPWPSNTunnelsStatusSourceIpAddr 1.3.6.1.4.1.2281.10.8.4.6.7.1.4
PSN tunnel source IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

genEquipServicesNGPWPSNTunnelsStatusSourceMacAddr 1.3.6.1.4.1.2281.10.8.4.6.7.1.5
PSN tunnel source MAC address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

genEquipServicesNGPWPSNTunnelsStatusRemoteMacAddr 1.3.6.1.4.1.2281.10.8.4.6.7.1.6
PSN tunnel remote MAC address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

genEquipServicesNGPWServiceStatusTable 1.3.6.1.4.1.2281.10.8.4.6.8
This table contains status information of existing PW services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWServiceStatusEntry

genEquipServicesNGPWServiceStatusEntry 1.3.6.1.4.1.2281.10.8.4.6.8.1
This table entry contains status information of existing PW services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWServiceStatusEntry  

genEquipServicesNGPWServiceStatusSlotID 1.3.6.1.4.1.2281.10.8.4.6.8.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

genEquipServicesNGPWServiceStatusID 1.3.6.1.4.1.2281.10.8.4.6.8.1.2
Pseudowire ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

genEquipServicesNGPWServiceStatusOperStatus 1.3.6.1.4.1.2281.10.8.4.6.8.1.3
Indicates the operational status of PW service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipServicesNGPWServiceStatusClearStats 1.3.6.1.4.1.2281.10.8.4.6.8.1.4
Clear all statistics for this PW service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipServicesNGPWServiceStatusTxPkts 1.3.6.1.4.1.2281.10.8.4.6.8.1.5
Number of transmitted packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipServicesNGPWServiceStatusReceivedPkts 1.3.6.1.4.1.2281.10.8.4.6.8.1.6
Number of received packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipServicesNGPWServiceStatusTransitionsLOPS 1.3.6.1.4.1.2281.10.8.4.6.8.1.7
Number of transitions from the normal state to the LOPS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipServicesNGPWServiceStatusJitterBufferOverruns 1.3.6.1.4.1.2281.10.8.4.6.8.1.8
Number of jitter buffer overruns.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipServicesNGPWServiceStatusBufferDeviations 1.3.6.1.4.1.2281.10.8.4.6.8.1.9
Max Jitter Buffer Deviation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipServicesNGPWServiceStatusMinJitterCount 1.3.6.1.4.1.2281.10.8.4.6.8.1.10
Minimum jitter buffer usage registered for the last second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipServicesNGPWServiceStatusMaxJitterCount 1.3.6.1.4.1.2281.10.8.4.6.8.1.11
Maximum jitter buffer usage registered for the last second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipServicesNGPWTDMPortsStatusTable 1.3.6.1.4.1.2281.10.8.4.6.9
This table contains status information about TDM ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWTDMPortsStatusEntry

genEquipServicesNGPWTDMPortsStatusEntry 1.3.6.1.4.1.2281.10.8.4.6.9.1
This table entry contains status information about TDM ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWTDMPortsStatusEntry  

genEquipServicesNGPWTDMPortsStatusSlotID 1.3.6.1.4.1.2281.10.8.4.6.9.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

genEquipServicesNGPWTDMPortsStatusPort 1.3.6.1.4.1.2281.10.8.4.6.9.1.2
Physical port number in the card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

genEquipServicesNGPWTDMPortsStatusIfIndex 1.3.6.1.4.1.2281.10.8.4.6.9.1.3
ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWTDMPortsStatusOperStatus 1.3.6.1.4.1.2281.10.8.4.6.9.1.4
Operational state of the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DownUp  

genEquipServicesNGPWTDMPortsStatusLoopbackCounter 1.3.6.1.4.1.2281.10.8.4.6.9.1.5
Loopback time left (in seconds)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWTDMPortsStatusActualLoopback 1.3.6.1.4.1.2281.10.8.4.6.9.1.6
Actual status of loopback on this TDM port reported by the card.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWTDMPortsStatusLineStatus 1.3.6.1.4.1.2281.10.8.4.6.9.1.7
Currently present line-level PDH alarms.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWTDMPortsStatusLoopback 1.3.6.1.4.1.2281.10.8.4.6.9.1.8
Type of required loopback on this TDM port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TDMLoopbackType  

genEquipServicesNGPWBundlesStatusTable 1.3.6.1.4.1.2281.10.8.4.6.10
This table contains the current staus for bundles.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWBundlesStatusEntry

genEquipServicesNGPWBundlesStatusEntry 1.3.6.1.4.1.2281.10.8.4.6.10.1
This table contains the current staus for bundles.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWBundlesStatusEntry  

genEquipServicesNGPWBundlesStatusSlotID 1.3.6.1.4.1.2281.10.8.4.6.10.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

genEquipServicesNGPWBundlesStatusBundleId 1.3.6.1.4.1.2281.10.8.4.6.10.1.2
Bundle ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesNGPWBundlesStatusOperStatus 1.3.6.1.4.1.2281.10.8.4.6.10.1.3
Bundle operational state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipServicesNGPWPSNTunnelGroupTable 1.3.6.1.4.1.2281.10.8.4.6.11
This table allows configuration of groups of tunnels for PW path protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWPSNTunnelGroupEntry

genEquipServicesNGPWPSNTunnelGroupEntry 1.3.6.1.4.1.2281.10.8.4.6.11.1
This table entry allows configuration of groups of tunnels for PW path protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWPSNTunnelGroupEntry  

genEquipServicesNGPWPSNTunnelGroupSlot 1.3.6.1.4.1.2281.10.8.4.6.11.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWPSNTunnelGroupId 1.3.6.1.4.1.2281.10.8.4.6.11.1.2
Indicates the corresponding PSN Tunnel Protection Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWPSNTunnelGroupPrimaryId 1.3.6.1.4.1.2281.10.8.4.6.11.1.3
Tunnel ID for the primary path.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWPSNTunnelGroupSecondaryId 1.3.6.1.4.1.2281.10.8.4.6.11.1.4
Tunnel ID for the secondary path.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..128  

genEquipServicesNGPWPSNTunnelGroupAdmin 1.3.6.1.4.1.2281.10.8.4.6.11.1.5
Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWPSNTunnelGroupRevertive 1.3.6.1.4.1.2281.10.8.4.6.11.1.6
Enable for revertive protection. Default is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWPSNTunnelGroupProtectionMode 1.3.6.1.4.1.2281.10.8.4.6.11.1.7
Protection mode 1+1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWPSNTunnelGroupRowStatus 1.3.6.1.4.1.2281.10.8.4.6.11.1.30
This value is the status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesNGPWPSNTunnelGroupStatusTable 1.3.6.1.4.1.2281.10.8.4.6.12
This table contains status of path protection tunnels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWPSNTunnelGroupStatusEntry

genEquipServicesNGPWPSNTunnelGroupStatusEntry 1.3.6.1.4.1.2281.10.8.4.6.12.1
This table entry contains status of path protection tunnels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWPSNTunnelGroupStatusEntry  

genEquipServicesNGPWPSNTunnelGroupStatusSlot 1.3.6.1.4.1.2281.10.8.4.6.12.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWPSNTunnelGroupStatusId 1.3.6.1.4.1.2281.10.8.4.6.12.1.2
Tunnel group ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWPSNTunnelGroupStatusOperStatus 1.3.6.1.4.1.2281.10.8.4.6.12.1.3
Tunnel group operational state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipServicesNGPWPSNTunnelGroupStatusProtectionCommand 1.3.6.1.4.1.2281.10.8.4.6.12.1.4
User command to perform a path protection switch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TunnelGroupProtectionCmd  

genEquipServicesNGPWPSNTunnelGroupStatusProtectionSwitches 1.3.6.1.4.1.2281.10.8.4.6.12.1.5
A counter of PSN tunnel protection switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWPSNTunnelGroupStatusActiveTunnel 1.3.6.1.4.1.2281.10.8.4.6.12.1.6
Current active PSN tunnel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWPSNTunnelGroupStatusClearStats 1.3.6.1.4.1.2281.10.8.4.6.12.1.7
User command to clear number of switches counter.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipServicesNGPWPSNTunnelGroupStatusRevertiveCountdown 1.3.6.1.4.1.2281.10.8.4.6.12.1.8
Time left until revertive switch is performed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OffOn  

genEquipServicesNGPWSOAMMDTable 1.3.6.1.4.1.2281.10.8.4.6.13
This table allows configuration of MD parameters at the PW card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWSOAMMDEntry

genEquipServicesNGPWSOAMMDEntry 1.3.6.1.4.1.2281.10.8.4.6.13.1
This table entry allows configuration of MD parameters at the PW card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWSOAMMDEntry  

genEquipServicesNGPWSOAMMDSlot 1.3.6.1.4.1.2281.10.8.4.6.13.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMDId 1.3.6.1.4.1.2281.10.8.4.6.13.1.2
Maintenance Domain ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMDName 1.3.6.1.4.1.2281.10.8.4.6.13.1.3
Maintenance Domain Name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipServicesNGPWSOAMMDLevel 1.3.6.1.4.1.2281.10.8.4.6.13.1.4
Maintenance Domain level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMDRowStatus 1.3.6.1.4.1.2281.10.8.4.6.13.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesNGPWSOAMMATable 1.3.6.1.4.1.2281.10.8.4.6.14
This table allows configuration of MA parameters at the PW card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWSOAMMAEntry

genEquipServicesNGPWSOAMMAEntry 1.3.6.1.4.1.2281.10.8.4.6.14.1
This table entry allows configuration of MA parameters at the PW card.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWSOAMMAEntry  

genEquipServicesNGPWSOAMMASlot 1.3.6.1.4.1.2281.10.8.4.6.14.1.1
Slot ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMAId 1.3.6.1.4.1.2281.10.8.4.6.14.1.2
Maintenance association ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMAName 1.3.6.1.4.1.2281.10.8.4.6.14.1.3
Maintenance Association name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipServicesNGPWSOAMMAMdId 1.3.6.1.4.1.2281.10.8.4.6.14.1.4
Maintenance Domain ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMALocalMepId 1.3.6.1.4.1.2281.10.8.4.6.14.1.5
Local MEP ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMARemoteMepId 1.3.6.1.4.1.2281.10.8.4.6.14.1.6
Remote MEP ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMAVid 1.3.6.1.4.1.2281.10.8.4.6.14.1.7
VLAN ID of the Maintenance Association.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMAVlanType 1.3.6.1.4.1.2281.10.8.4.6.14.1.8
VLAN type of the Maintenance Association.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWTunnelVlanType  

genEquipServicesNGPWSOAMMACCMAdmin 1.3.6.1.4.1.2281.10.8.4.6.14.1.9
Maintenance Association CCM administrative status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipServicesNGPWSOAMMACCMInterval 1.3.6.1.4.1.2281.10.8.4.6.14.1.10
Maintenance Association CCM Interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWSOAMccmInterval  

genEquipServicesNGPWSOAMMACCMLTMPriority 1.3.6.1.4.1.2281.10.8.4.6.14.1.11
Maintenance Association link trace message priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMARowStatus 1.3.6.1.4.1.2281.10.8.4.6.14.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesNGPWSOAMMAStatusTable 1.3.6.1.4.1.2281.10.8.4.6.15
This table shows the SOAM status of each MA at the PW card level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesNGPWSOAMMAStatusEntry

genEquipServicesNGPWSOAMMAStatusEntry 1.3.6.1.4.1.2281.10.8.4.6.15.1
This table entry shows the SOAM status of each MA at the PW card level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesNGPWSOAMMAStatusEntry  

genEquipServicesNGPWSOAMMAStatusSlot 1.3.6.1.4.1.2281.10.8.4.6.15.1.1
Slot ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMAStatusId 1.3.6.1.4.1.2281.10.8.4.6.15.1.2
Maintenance association ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWSOAMMAStatusRemoteMepMACAddr 1.3.6.1.4.1.2281.10.8.4.6.15.1.3
Remote MEP MAC Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

genEquipServicesNGPWSOAMMAStatusDefects 1.3.6.1.4.1.2281.10.8.4.6.15.1.4
Bitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8), Cross-connection CCM (16), AIS (32).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWTDM 1.3.6.1.4.1.2281.10.8.4.6.20
OBJECT IDENTIFIER    

genEquipServicesNGPWTDMRevertiveTimer 1.3.6.1.4.1.2281.10.8.4.6.20.1
The WTR (Wait To Restore) timer for revertive switches.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWRangeVC 1.3.6.1.4.1.2281.10.8.4.6.20.2
TDM services VC range.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWOffsetVC 1.3.6.1.4.1.2281.10.8.4.6.20.3
TDM services VC offset.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesNGPWLatencyOptimizationAdmin 1.3.6.1.4.1.2281.10.8.4.6.20.4
Enables/Disables the option of choosing a latency-optimized mode for TDM services.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesPWPSNTunnelGroupsTable 1.3.6.1.4.1.2281.10.8.4.10
This table allows configuration of PSN protection groups for pseudowire service path protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesPWPSNTunnelGroupsEntry

genEquipServicesPWPSNTunnelGroupsEntry 1.3.6.1.4.1.2281.10.8.4.10.1
This entry table allows configuration of PSN protection groups for pseudowire service path protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesPWPSNTunnelGroupsEntry  

genEquipServicesPWPSNTunnelGroupsTunnelGroupID 1.3.6.1.4.1.2281.10.8.4.10.1.1
PSN Tunnel Group ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..64  

genEquipServicesPWPSNTunnelGroupsTunnelIDPrimary 1.3.6.1.4.1.2281.10.8.4.10.1.2
Primary PSN tunnel ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..128  

genEquipServicesPWPSNTunnelGroupsTunnelIDSecondary 1.3.6.1.4.1.2281.10.8.4.10.1.3
Secondary PSN tunnel ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..128  

genEquipServicesPWPSNTunnelGroupsSwitchToStandby 1.3.6.1.4.1.2281.10.8.4.10.1.4
Force a switch from primary to secondary tunnel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipServicesPWPSNTunnelGroupsRowStatus 1.3.6.1.4.1.2281.10.8.4.10.1.30
This value is the status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesPWPSNTunnelGroupStatusTable 1.3.6.1.4.1.2281.10.8.4.11
This table allows monitoring of PSN protection groups status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesPWPSNTunnelGroupStatusEntry

genEquipServicesPWPSNTunnelGroupStatusEntry 1.3.6.1.4.1.2281.10.8.4.11.1
This table entry allows monitoring of PSN protection groups status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesPWPSNTunnelGroupStatusEntry  

genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID 1.3.6.1.4.1.2281.10.8.4.11.1.1
PSN Tunnel Group ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

genEquipServicesPWPSNTunnelGroupStatusCurrActiveTunnel 1.3.6.1.4.1.2281.10.8.4.11.1.2
Currently active PSN tunnel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

genEquipServicesPWPSNTunnelGroupStatusNumProtSwitches 1.3.6.1.4.1.2281.10.8.4.11.1.3
Counter of PSN tunnel protection switches.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesPWSOAMMDTable 1.3.6.1.4.1.2281.10.8.4.12
This table allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesPWSOAMMDEntry

genEquipServicesPWSOAMMDEntry 1.3.6.1.4.1.2281.10.8.4.12.1
This table entry allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesPWSOAMMDEntry  

genEquipServicesPWSOAMMDDomainID 1.3.6.1.4.1.2281.10.8.4.12.1.1
Domain ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8  

genEquipServicesPWSOAMMDDomainName 1.3.6.1.4.1.2281.10.8.4.12.1.2
Domain Name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipServicesPWSOAMMDDomainLevel 1.3.6.1.4.1.2281.10.8.4.12.1.3
Domain Level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipServicesPWSOAMMDRowStatus 1.3.6.1.4.1.2281.10.8.4.12.1.30
This value is the status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesPWSOAMMATable 1.3.6.1.4.1.2281.10.8.4.13
This table allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesPWSOAMMAEntry

genEquipServicesPWSOAMMAEntry 1.3.6.1.4.1.2281.10.8.4.13.1
This table entry allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesPWSOAMMAEntry  

genEquipServicesPWSOAMMALocalID 1.3.6.1.4.1.2281.10.8.4.13.1.1
Maintenance Association local ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

genEquipServicesPWSOAMMALocalName 1.3.6.1.4.1.2281.10.8.4.13.1.2
Maintenance Association local Name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipServicesPWSOAMMADomainID 1.3.6.1.4.1.2281.10.8.4.13.1.3
Maintenance Association domain ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipServicesPWSOAMMAAdmin 1.3.6.1.4.1.2281.10.8.4.13.1.4
Maintenance Association Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesPWSOAMMALocalMEP 1.3.6.1.4.1.2281.10.8.4.13.1.5
Maintenance Association local MEP ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8191  

genEquipServicesPWSOAMMARemoteMEP 1.3.6.1.4.1.2281.10.8.4.13.1.6
Maintenance Association remote MEP ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..8191  

genEquipServicesPWSOAMMAVlanType 1.3.6.1.4.1.2281.10.8.4.13.1.7
VLAN type of the Maintenance Association.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), c-type(1)  

genEquipServicesPWSOAMMAVlanID 1.3.6.1.4.1.2281.10.8.4.13.1.8
VLAN Id of the Maintenance Association.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4090  

genEquipServicesPWSOAMMACCMInterval 1.3.6.1.4.1.2281.10.8.4.13.1.9
CCM Interval.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER nInvalid(0), n3-3-msec(1), n10-msec(2), n100-msec(3), n1s(4), n10s(5), n1min(6), n10min(7)  

genEquipServicesPWSOAMMACCMAdmin 1.3.6.1.4.1.2281.10.8.4.13.1.10
Maintenance Association CCM admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesPWSOAMMACCMPriority 1.3.6.1.4.1.2281.10.8.4.13.1.11
CCM Priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipServicesPWSOAMMARemoteMEPAddr 1.3.6.1.4.1.2281.10.8.4.13.1.12
MAC Address of the Maintenance Association Remote MEP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

genEquipServicesPWSOAMMADefects 1.3.6.1.4.1.2281.10.8.4.13.1.13
Bitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8), Cross-connection CCM (16), AIS (32).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesPWSOAMMARowStatus 1.3.6.1.4.1.2281.10.8.4.13.1.30
This value is the status of the entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesCet 1.3.6.1.4.1.2281.10.8.5
OBJECT IDENTIFIER    

genEquipServicesCetGeneral 1.3.6.1.4.1.2281.10.8.5.1
OBJECT IDENTIFIER    

genEquipServicesCetSvlanEtherType 1.3.6.1.4.1.2281.10.8.5.1.1
S VLAN Ether type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ether-type-0x88a8(0), ether-type-0x9100(1), ether-type-0x9200(2), ether-type-0x8100(3)  

genEquipServicesCetAgingTimeout 1.3.6.1.4.1.2281.10.8.5.1.2
MAC forwarding entry aging timeout in seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 15..3825  

genEquipServicesCetConfigTable 1.3.6.1.4.1.2281.10.8.5.2
Ethernet Services configuration table - the table describes the connectivity between the interface of the switch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesCetConfigEntry

genEquipServicesCetConfigEntry 1.3.6.1.4.1.2281.10.8.5.2.1
Ethernet Services configuration table entry - the table describes the connectivity between the interface of the switch.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesCetConfigEntry  

genEquipServicesCetConfigIndex 1.3.6.1.4.1.2281.10.8.5.2.1.1
Service ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1025  

genEquipServicesCetConfigType 1.3.6.1.4.1.2281.10.8.5.2.1.2
Ethernet Service Type (Management, MP, P2P).
Status: mandatory Access: read-write
OBJECT-TYPE    
  ServiceType  

genEquipServicesCetConfigAdmin 1.3.6.1.4.1.2281.10.8.5.2.1.3
Service Admin state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ServiceAdmin  

genEquipServicesCetConfigMacTableSize 1.3.6.1.4.1.2281.10.8.5.2.1.4
MAC Table size of the service,granularity of 16.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 16..131072  

genEquipServicesCetConfigDefaultCos 1.3.6.1.4.1.2281.10.8.5.2.1.5
Service default CoS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipServicesCetConfigCosMode 1.3.6.1.4.1.2281.10.8.5.2.1.6
Service CoS Color mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  ServiceCosMode  

genEquipServicesCetConfigEvcId 1.3.6.1.4.1.2281.10.8.5.2.1.7
Ethernet Virtual Connection (EVC) ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipServicesCetConfigEvcDescription 1.3.6.1.4.1.2281.10.8.5.2.1.8
Ethernet Virtual Connection (EVC) Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipServicesCetConfigSplitHorizon 1.3.6.1.4.1.2281.10.8.5.2.1.9
Split Horizon group Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetConfigResiliencyProtocolInstance 1.3.6.1.4.1.2281.10.8.5.2.1.10
Resiliency Protocol Instance.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesCetConfigProtectingTrail 1.3.6.1.4.1.2281.10.8.5.2.1.11
Protecting trail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesCetConfigProtectingTrailIndex 1.3.6.1.4.1.2281.10.8.5.2.1.12
Protecting trail id.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesCetConfigServiceSubType 1.3.6.1.4.1.2281.10.8.5.2.1.13
Service sub type (Ethernet / TDM / PWE)
Status: mandatory Access: read-write
OBJECT-TYPE    
  ServiceSubType  

genEquipServicesCetConfigTrailIndex 1.3.6.1.4.1.2281.10.8.5.2.1.14
TDM Trail ID
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesCetConfigRowStatus 1.3.6.1.4.1.2281.10.8.5.2.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesCetStatusTable 1.3.6.1.4.1.2281.10.8.5.3
Ethernet Services status table - the table describes the status of the configured services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesCetStatusEntry

genEquipServicesCetStatusEntry 1.3.6.1.4.1.2281.10.8.5.3.1
Ethernet Services status table - the table describes the status of the configured services entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesCetStatusEntry  

genEquipServicesCetStatusIndex 1.3.6.1.4.1.2281.10.8.5.3.1.1
Service ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1025  

genEquipServicesCetStatusMulticast 1.3.6.1.4.1.2281.10.8.5.3.1.2
Configured Multicast Group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpConfigTable 1.3.6.1.4.1.2281.10.8.5.4
Ethernet Service Points (SP) configuration table - this table describes the ingress and egress attributes (operation) per SPs of each service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesCetSpConfigEntry

genEquipServicesCetSpConfigEntry 1.3.6.1.4.1.2281.10.8.5.4.1
Ethernet Service Points (SP) configuration table entry - this table describes the ingress and egress attributes (operation) per SPs of each service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesCetSpConfigEntry  

genEquipServicesCetSpConfigServiceIndex 1.3.6.1.4.1.2281.10.8.5.4.1.1
Service ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1025  

genEquipServicesCetSpConfigServicePointIndex 1.3.6.1.4.1.2281.10.8.5.4.1.2
Service Point ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

genEquipServicesCetSpConfigSpType 1.3.6.1.4.1.2281.10.8.5.4.1.3
Service Point Type (SAP, SNP, PIPE, MNG).
Status: mandatory Access: read-write
OBJECT-TYPE    
  SPType  

genEquipServicesCetSpConfigSpSubtype 1.3.6.1.4.1.2281.10.8.5.4.1.4
The Service Point Attached Interface Type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  SPSubType  

genEquipServicesCetSpConfigSpName 1.3.6.1.4.1.2281.10.8.5.4.1.5
Service Point Name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipServicesCetSpConfigIfIndex 1.3.6.1.4.1.2281.10.8.5.4.1.6
Ethernet Logical port if-index ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesCetSpConfigSvlanEncap 1.3.6.1.4.1.2281.10.8.5.4.1.7
S-Vlan Encapsulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 4096..4097  

genEquipServicesCetSpConfigCvlanEncap 1.3.6.1.4.1.2281.10.8.5.4.1.8
C-Vlan Encapsulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4097  

genEquipServicesCetSpConfigLearning 1.3.6.1.4.1.2281.10.8.5.4.1.9
Service Point Learning Admin (disable / enable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpConfigFlooding 1.3.6.1.4.1.2281.10.8.5.4.1.10
SP Ingress aatribute - Allow Flooding of the incoming packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisableAllowed  

genEquipServicesCetSpConfigBroadcast 1.3.6.1.4.1.2281.10.8.5.4.1.11
SP Ingress aatribute - Allow Broadcast of the incoming packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisableAllowed  

genEquipServicesCetSpConfigCosMode 1.3.6.1.4.1.2281.10.8.5.4.1.12
Service Point CoS Color mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  SPCosMode  

genEquipServicesCetSpConfigDefCos 1.3.6.1.4.1.2281.10.8.5.4.1.13
Service Point Default CoS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipServicesCetSpConfigPclProfileId 1.3.6.1.4.1.2281.10.8.5.4.1.14
pcl-profile-id.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

genEquipServicesCetSpConfigPclAdmin 1.3.6.1.4.1.2281.10.8.5.4.1.15
PCL Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpConfigMonitorCounterGroup 1.3.6.1.4.1.2281.10.8.5.4.1.16
SP Ingress attribute - Assign the SP to a specific Monitor Counters Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..16  

genEquipServicesCetSpConfigSplitHorizon 1.3.6.1.4.1.2281.10.8.5.4.1.17
Split Horizon Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  SplitHorizonGroup  

genEquipServicesCetSpConfigSvlanEgressPreserve 1.3.6.1.4.1.2281.10.8.5.4.1.18
SP Egress attribute - Preserve the S VLAN as it was on the Ingress Service Point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpConfigSvlanCosPreserve 1.3.6.1.4.1.2281.10.8.5.4.1.19
SP Egress attribute - Preserve the S VLAN CoS as it was on the Ingress Service Point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpConfigCvlanEgressPreserve 1.3.6.1.4.1.2281.10.8.5.4.1.20
SP Egress attribute - Preserve the C VLAN as it was on the Ingress Service Point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpConfigCvlanCosPreserve 1.3.6.1.4.1.2281.10.8.5.4.1.21
SP Egress attribute - Preserve the C VLAN CoS as it was on the Ingress Service Point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpConfigMarkingMode 1.3.6.1.4.1.2281.10.8.5.4.1.22
SP Ingress attribute - Enable / Disable Marking of the incoming packet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpConfigServiceClassId 1.3.6.1.4.1.2281.10.8.5.4.1.23
SP Egress attribute - Service Bundle ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

genEquipServicesCetSpConfigTcamClassification 1.3.6.1.4.1.2281.10.8.5.4.1.24
TCAM-Classification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesCetSpConfigRowStatus 1.3.6.1.4.1.2281.10.8.5.4.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesCetSpPolicerAssociationTable 1.3.6.1.4.1.2281.10.8.5.5
Service Point and Service Point CoS Policing configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesCetSpPolicerAssociationEntry

genEquipServicesCetSpPolicerAssociationEntry 1.3.6.1.4.1.2281.10.8.5.5.1
Service Point and Service Point CoS Policing configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesCetSpPolicerAssociationEntry  

genEquipServicesCetSpPolicerAssociationServiceIndex 1.3.6.1.4.1.2281.10.8.5.5.1.1
Service ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1025  

genEquipServicesCetSpPolicerAssociationSpIndex 1.3.6.1.4.1.2281.10.8.5.5.1.2
Service Point ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

genEquipServicesCetSpPolicerAssociationSpPolicerAdmin 1.3.6.1.4.1.2281.10.8.5.5.1.3
Service Point Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpPolicerAssociationCos0Profile 1.3.6.1.4.1.2281.10.8.5.5.1.4
CoS 0 Policer attached Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesCetSpPolicerAssociationCos0Admin 1.3.6.1.4.1.2281.10.8.5.5.1.5
CoS 0 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpPolicerAssociationCos1Profile 1.3.6.1.4.1.2281.10.8.5.5.1.6
CoS 1 Policer attached Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesCetSpPolicerAssociationCos1Admin 1.3.6.1.4.1.2281.10.8.5.5.1.7
CoS 1 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpPolicerAssociationCos2Profile 1.3.6.1.4.1.2281.10.8.5.5.1.8
CoS 2 Policer attached Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesCetSpPolicerAssociationCos2Admin 1.3.6.1.4.1.2281.10.8.5.5.1.9
CoS 2 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpPolicerAssociationCos3Profile 1.3.6.1.4.1.2281.10.8.5.5.1.10
CoS 3 Policer attached Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesCetSpPolicerAssociationCos3Admin 1.3.6.1.4.1.2281.10.8.5.5.1.11
CoS 3 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisableAllowed  

genEquipServicesCetSpPolicerAssociationCos4Profile 1.3.6.1.4.1.2281.10.8.5.5.1.12
CoS 4 Policer attached Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  SPCosMode 1..256  

genEquipServicesCetSpPolicerAssociationCos4Admin 1.3.6.1.4.1.2281.10.8.5.5.1.13
CoS 4 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpPolicerAssociationCos5Profile 1.3.6.1.4.1.2281.10.8.5.5.1.14
CoS 5 Policer attached Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesCetSpPolicerAssociationCos5Admin 1.3.6.1.4.1.2281.10.8.5.5.1.15
CoS 5 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpPolicerAssociationCos6Profile 1.3.6.1.4.1.2281.10.8.5.5.1.16
CoS 6 Policer attached Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesCetSpPolicerAssociationCos6Admin 1.3.6.1.4.1.2281.10.8.5.5.1.17
CoS 6 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpPolicerAssociationCos7Profile 1.3.6.1.4.1.2281.10.8.5.5.1.18
CoS 7 Policer attached Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipServicesCetSpPolicerAssociationCos7Admin 1.3.6.1.4.1.2281.10.8.5.5.1.19
CoS 7 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipServicesCetSpPolicerAssociationRowStatus 1.3.6.1.4.1.2281.10.8.5.5.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesCetSpVlanMappingTable 1.3.6.1.4.1.2281.10.8.5.6
The table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesCetSpVlanMappingEntry

genEquipServicesCetSpVlanMappingEntry 1.3.6.1.4.1.2281.10.8.5.6.1
The table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesCetSpVlanMappingEntry  

genEquipServicesCetSpVlanMappingServiceId 1.3.6.1.4.1.2281.10.8.5.6.1.1
Service ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..1025  

genEquipServicesCetSpVlanMappingSpId 1.3.6.1.4.1.2281.10.8.5.6.1.2
Service Point ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

genEquipServicesCetSpVlanMappingSvlanIndex 1.3.6.1.4.1.2281.10.8.5.6.1.3
S-Vlan Encapsulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4097  

genEquipServicesCetSpVlanMappingCvlanIndex 1.3.6.1.4.1.2281.10.8.5.6.1.4
C-Vlan Encapsulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4097  

genEquipServicesCetSpVlanMappingVlanCosOverride 1.3.6.1.4.1.2281.10.8.5.6.1.5
The CoS Value field is valid.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrueFalse  

genEquipServicesCetSpVlanMappingVlanDefCos 1.3.6.1.4.1.2281.10.8.5.6.1.6
CoS overwrite value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipServicesCetSpVlanMappingColor 1.3.6.1.4.1.2281.10.8.5.6.1.7
Service Point COLOR.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipServicesCetSpVlanMappingIfIndex 1.3.6.1.4.1.2281.10.8.5.6.1.8
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesCetSpVlanMappingIfSlotIndex 1.3.6.1.4.1.2281.10.8.5.6.1.9
Slot index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesCetSpVlanMappingIfPortIndex 1.3.6.1.4.1.2281.10.8.5.6.1.10
Port index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..10  

genEquipServicesCetSpVlanMappingRowStatus 1.3.6.1.4.1.2281.10.8.5.6.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsTable 1.3.6.1.4.1.2281.10.8.5.7
Clear all interface egress queues statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry

genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry 1.3.6.1.4.1.2281.10.8.5.7.1
Clear all interface egress queues statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry  

genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex 1.3.6.1.4.1.2281.10.8.5.7.1.1
ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsClearOnRead 1.3.6.1.4.1.2281.10.8.5.7.1.2
Clear all statistics for the specific port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsTable 1.3.6.1.4.1.2281.10.8.5.8
Clear all Service egress queues statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry

genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry 1.3.6.1.4.1.2281.10.8.5.8.1
Clear all Service egress queues statistics.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry  

genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex 1.3.6.1.4.1.2281.10.8.5.8.1.1
ifIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex 1.3.6.1.4.1.2281.10.8.5.8.1.2
Egress service bundle ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsClearOnRead 1.3.6.1.4.1.2281.10.8.5.8.1.3
clear on read.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipServicesTM 1.3.6.1.4.1.2281.10.8.6
OBJECT IDENTIFIER    

genEquipTmMapping 1.3.6.1.4.1.2281.10.8.6.1
OBJECT IDENTIFIER    

genEquipTmMappingSVlanPriToCosTable 1.3.6.1.4.1.2281.10.8.6.1.1
Global 802.1AD classification table to CoS and Color.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmMappingSVlanPriToCosEntry

genEquipTmMappingSVlanPriToCosEntry 1.3.6.1.4.1.2281.10.8.6.1.1.1
Global 802.1AD classification table to CoS and Color entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmMappingSVlanPriToCosEntry  

genEquipTmMappingSVlanPriToCosUpIndex 1.3.6.1.4.1.2281.10.8.6.1.1.1.1
User Priority bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMappingSVlanPriToCosDeiIndex 1.3.6.1.4.1.2281.10.8.6.1.1.1.2
DEI bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

genEquipTmMappingSVlanPriToCosCos 1.3.6.1.4.1.2281.10.8.6.1.1.1.3
CoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMappingSVlanPriToCosColor 1.3.6.1.4.1.2281.10.8.6.1.1.1.4
Color bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipTmMappingCVlanPriToCosTable 1.3.6.1.4.1.2281.10.8.6.1.2
Global 802.1Q classification table to CoS and Color.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmMappingCVlanPriToCosEntry

genEquipTmMappingCVlanPriToCosEntry 1.3.6.1.4.1.2281.10.8.6.1.2.1
Global 802.1Q classification table to CoS and Color entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmMappingCVlanPriToCosEntry  

genEquipTmMappingCVlanPriToCosUpIndex 1.3.6.1.4.1.2281.10.8.6.1.2.1.1
User Priority bits - Global 802.1Q User Priority and CFI bits classification table to CoS and Color.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMappingCVlanPriToCosCfiIndex 1.3.6.1.4.1.2281.10.8.6.1.2.1.2
CFI bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

genEquipTmMappingCVlanPriToCosCos 1.3.6.1.4.1.2281.10.8.6.1.2.1.3
CoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMappingCVlanPriToCosColor 1.3.6.1.4.1.2281.10.8.6.1.2.1.4
Color bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipTmMappingDscpToCosTable 1.3.6.1.4.1.2281.10.8.6.1.3
Global DSCP bits classification table to CoS and Color.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmMappingDscpToCosEntry

genEquipTmMappingDscpToCosEntry 1.3.6.1.4.1.2281.10.8.6.1.3.1
Global DSCP bits classification table to CoS and Color entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmMappingDscpToCosEntry  

genEquipTmMappingDscpToCosDscpIndex 1.3.6.1.4.1.2281.10.8.6.1.3.1.1
DSCP bits - Global DSCP bits classification table to CoS and Color.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..56  

genEquipTmMappingDscpToCosBinary 1.3.6.1.4.1.2281.10.8.6.1.3.1.2
Global DSCP bits classification table to CoS and Color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

genEquipTmMappingDscpToCosDescription 1.3.6.1.4.1.2281.10.8.6.1.3.1.3
user description field - Global DSCP bits classification table to CoS and Color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipTmMappingDscpToCosCos 1.3.6.1.4.1.2281.10.8.6.1.3.1.4
CoS bits - Global DSCP bits classification table to CoS and Color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMappingDscpToCosColor 1.3.6.1.4.1.2281.10.8.6.1.3.1.5
Color bit - Global DSCP bits classification table to CoS and Color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipTmMappingMPLSExpPriToCosTable 1.3.6.1.4.1.2281.10.8.6.1.4
Color bit - Global MPLS EXP bits classification table to CoS and Color.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmMappingMPLSExpPriToCosEntry

genEquipTmMappingMPLSExpPriToCosEntry 1.3.6.1.4.1.2281.10.8.6.1.4.1
Color bit - Global MPLS EXP bits classification table to CoS and Color entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmMappingMPLSExpPriToCosEntry  

genEquipTmMappingMPLSExpPriToCosMplsExpIndex 1.3.6.1.4.1.2281.10.8.6.1.4.1.1
Experimental bits - Global MPLS EXP bits classification table to CoS and Color.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMappingMPLSExpPriToCosCos 1.3.6.1.4.1.2281.10.8.6.1.4.1.2
CoS bit - Global MPLS EXP bits classification table to CoS and Color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMappingMPLSExpPriToCosColor 1.3.6.1.4.1.2281.10.8.6.1.4.1.3
Color bit - Global MPLS EXP bits classification table to CoS and Color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  GreenYellow  

genEquipTmMarkingSVlanPriTable 1.3.6.1.4.1.2281.10.8.6.1.5
Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmMarkingSVlanPriEntry

genEquipTmMarkingSVlanPriEntry 1.3.6.1.4.1.2281.10.8.6.1.5.1
Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmMarkingSVlanPriEntry  

genEquipTmMarkingSVlanPriCosIndex 1.3.6.1.4.1.2281.10.8.6.1.5.1.1
CoS bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMarkingSVlanPriColorIndex 1.3.6.1.4.1.2281.10.8.6.1.5.1.2
Color bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  GreenYellow  

genEquipTmMarkingSVlanPriUserPriority 1.3.6.1.4.1.2281.10.8.6.1.5.1.3
User Priority bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMarkingSVlanPriDEI 1.3.6.1.4.1.2281.10.8.6.1.5.1.4
DEI bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

genEquipTmMarkingCVlanPriTable 1.3.6.1.4.1.2281.10.8.6.1.6
Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmMarkingCVlanPriEntry

genEquipTmMarkingCVlanPriEntry 1.3.6.1.4.1.2281.10.8.6.1.6.1
Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmMarkingCVlanPriEntry  

genEquipTmMarkingCVlanPriCosIndex 1.3.6.1.4.1.2281.10.8.6.1.6.1.1
CoS bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMarkingCVlanPriColorIndex 1.3.6.1.4.1.2281.10.8.6.1.6.1.2
Color bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI.
Status: mandatory Access: read-only
OBJECT-TYPE    
  GreenYellow  

genEquipTmMarkingCVlanPriUserPriority 1.3.6.1.4.1.2281.10.8.6.1.6.1.3
User Priority bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmMarkingCVlanPriCFI 1.3.6.1.4.1.2281.10.8.6.1.6.1.4
CFI bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

genEquipTmProfiles 1.3.6.1.4.1.2281.10.8.6.2
OBJECT IDENTIFIER    

genEquipProfilesPolicerTable 1.3.6.1.4.1.2281.10.8.6.2.1
General Policer Profile configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProfilesPolicerEntry

genEquipProfilesPolicerEntry 1.3.6.1.4.1.2281.10.8.6.2.1.1
General Policer Profile configuration table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProfilesPolicerEntry  

genEquipProfilesPolicerIndex 1.3.6.1.4.1.2281.10.8.6.2.1.1.1
User Profile ID number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

genEquipProfilesPolicerDescription 1.3.6.1.4.1.2281.10.8.6.2.1.1.2
Ingress Policer user Description field.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesPolicerPolicerType 1.3.6.1.4.1.2281.10.8.6.2.1.1.3
Ingress Policer Type (MEF TrTCM,RFC2697,RFC2698).
Status: mandatory Access: read-only
OBJECT-TYPE    
  PolicerType  

genEquipProfilesPolicerCir 1.3.6.1.4.1.2281.10.8.6.2.1.1.4
Ingress Policer Commited Information Rate (CIR).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProfilesPolicerCbs 1.3.6.1.4.1.2281.10.8.6.2.1.1.5
Ingress Policer Commited Burst Size (CBS).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

genEquipProfilesPolicerEir 1.3.6.1.4.1.2281.10.8.6.2.1.1.6
Ingress Policer Excess Information Rate (EIR).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProfilesPolicerEbs 1.3.6.1.4.1.2281.10.8.6.2.1.1.7
Ingress Policer Excess Burst Size (EBS).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..128  

genEquipProfilesPolicerColorMode 1.3.6.1.4.1.2281.10.8.6.2.1.1.8
Ingress Policer Color Mode (Color Aware or Color Blind).
Status: mandatory Access: read-write
OBJECT-TYPE    
  PolicerColorMode  

genEquipProfilesPolicerCouplingFlagMode 1.3.6.1.4.1.2281.10.8.6.2.1.1.9
Ingress Policer Coupling Flag between Green and Yellow leaky buckets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipProfilesPolicerDataPlaneId 1.3.6.1.4.1.2281.10.8.6.2.1.1.10
The real policer ID in the dataplan 0 to 10000.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4096  

genEquipProfilesPolicerRowStatus 1.3.6.1.4.1.2281.10.8.6.2.1.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipProfilesL4WredTable 1.3.6.1.4.1.2281.10.8.6.2.2
Green Curve Maximal Drop Ratio (in percentage).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProfilesL4WredEntry

genEquipProfilesL4WredEntry 1.3.6.1.4.1.2281.10.8.6.2.2.1
Green Curve Maximal Drop Ratio (in percentage) entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProfilesL4WredEntry  

genEquipProfilesL4WredIndex 1.3.6.1.4.1.2281.10.8.6.2.2.1.1
WRED Curves Profile ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

genEquipProfilesL4WredGreenMinThreshold 1.3.6.1.4.1.2281.10.8.6.2.2.1.2
Green Curve Minimal occupancy (No drop until this level).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..8192  

genEquipProfilesL4WredGreenMaxThreshold 1.3.6.1.4.1.2281.10.8.6.2.2.1.3
Green Curve Maximal occupancy (from this point 100% will be dropped).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..8192  

genEquipProfilesL4WredGreenMaxDrop 1.3.6.1.4.1.2281.10.8.6.2.2.1.4
Green Curve Maximal Drop Ratio (in percentage).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

genEquipProfilesL4WredYellowMinThreshold 1.3.6.1.4.1.2281.10.8.6.2.2.1.5
Yellow Curve Minimal occupancy (No drop until this level).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..8192  

genEquipProfilesL4WredYellowMaxThreshold 1.3.6.1.4.1.2281.10.8.6.2.2.1.6
Yellow Curve Maximal occupancy (from this point 100% will be dropped).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..8192  

genEquipProfilesL4WredYellowMaxDrop 1.3.6.1.4.1.2281.10.8.6.2.2.1.7
Yellow Curve Maximal Drop Ratio (in percentage).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..8192  

genEquipProfilesL4WredYellowRowStatus 1.3.6.1.4.1.2281.10.8.6.2.2.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipProfilesSchedulerCoSPriTable 1.3.6.1.4.1.2281.10.8.6.2.3
The table holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProfilesSchedulerCoSPriEntry

genEquipProfilesSchedulerCoSPriEntry 1.3.6.1.4.1.2281.10.8.6.2.3.1
The table entry holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProfilesSchedulerCoSPriEntry  

genEquipProfilesSchedulerCoSPriIndex 1.3.6.1.4.1.2281.10.8.6.2.3.1.1
Profile ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

genEquipProfilesSchedulerCoSPriCos0Description 1.3.6.1.4.1.2281.10.8.6.2.3.1.2
CoS 0 Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesSchedulerCoSPriGreenCos0Priority 1.3.6.1.4.1.2281.10.8.6.2.3.1.3
Green CoS 0 priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipProfilesSchedulerCoSPriCos1description 1.3.6.1.4.1.2281.10.8.6.2.3.1.4
CoS 1 Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesSchedulerCoSPriGreenCos1Priority 1.3.6.1.4.1.2281.10.8.6.2.3.1.5
Green CoS 1 priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipProfilesSchedulerCoSPriCos2Description 1.3.6.1.4.1.2281.10.8.6.2.3.1.6
CoS 2 Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesSchedulerCoSPriGreenCos2Priority 1.3.6.1.4.1.2281.10.8.6.2.3.1.7
Green CoS 2 priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipProfilesSchedulerCoSPriCos3description 1.3.6.1.4.1.2281.10.8.6.2.3.1.8
CoS 3 Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesSchedulerCoSPriGreenCos3Priority 1.3.6.1.4.1.2281.10.8.6.2.3.1.9
Green CoS 3 priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipProfilesSchedulerCoSPriCos4description 1.3.6.1.4.1.2281.10.8.6.2.3.1.10
CoS 4 Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesSchedulerCoSPriGreenCos4Priority 1.3.6.1.4.1.2281.10.8.6.2.3.1.11
Green CoS 4 priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipProfilesSchedulerCoSPriCos5description 1.3.6.1.4.1.2281.10.8.6.2.3.1.12
CoS 5 Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesSchedulerCoSPriGreenCos5Priority 1.3.6.1.4.1.2281.10.8.6.2.3.1.13
Green CoS 5 priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipProfilesSchedulerCoSPriCos6description 1.3.6.1.4.1.2281.10.8.6.2.3.1.14
CoS 6 Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesSchedulerCoSPriGreenCos6Priority 1.3.6.1.4.1.2281.10.8.6.2.3.1.15
Green CoS 6 priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4  

genEquipProfilesSchedulerCoSPriCos7description 1.3.6.1.4.1.2281.10.8.6.2.3.1.16
CoS 7 Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesSchedulerCoSPriGreenCos7Priority 1.3.6.1.4.1.2281.10.8.6.2.3.1.17
Green CoS 7 priority.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..42  

genEquipProfilesSchedulerCoSPriRowStatus 1.3.6.1.4.1.2281.10.8.6.2.3.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipProfilesSchedulerWfqTable 1.3.6.1.4.1.2281.10.8.6.2.4
The table holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProfilesSchedulerWfqEntry

genEquipProfilesSchedulerWfqEntry 1.3.6.1.4.1.2281.10.8.6.2.4.1
The table entry holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProfilesSchedulerWfqEntry  

genEquipProfilesSchedulerWfqIndex 1.3.6.1.4.1.2281.10.8.6.2.4.1.1
WFQ Profile ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7  

genEquipProfilesSchedulerWfqCos0Weight 1.3.6.1.4.1.2281.10.8.6.2.4.1.2
CoS 0 Weight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipProfilesSchedulerWfqCos1Weight 1.3.6.1.4.1.2281.10.8.6.2.4.1.3
CoS 1 Weight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipProfilesSchedulerWfqCos2Weight 1.3.6.1.4.1.2281.10.8.6.2.4.1.4
CoS 2 Weight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipProfilesSchedulerWfqCos3Weight 1.3.6.1.4.1.2281.10.8.6.2.4.1.5
CoS 3 Weight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipProfilesSchedulerWfqCos4Weight 1.3.6.1.4.1.2281.10.8.6.2.4.1.6
CoS 4 Weight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProfilesSchedulerWfqCos5Weight 1.3.6.1.4.1.2281.10.8.6.2.4.1.7
Green CoS 2 priority.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipProfilesSchedulerWfqCos6Weight 1.3.6.1.4.1.2281.10.8.6.2.4.1.8
CoS 3 Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipProfilesSchedulerWfqCos7Weight 1.3.6.1.4.1.2281.10.8.6.2.4.1.9
CoS 7 Weight.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipProfilesSchedulerWfqRowStatus 1.3.6.1.4.1.2281.10.8.6.2.4.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipProfilesL2ShaperTable 1.3.6.1.4.1.2281.10.8.6.2.5
The table holds the Egress Shaper profiles at port level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProfilesL2ShaperEntry

genEquipProfilesL2ShaperEntry 1.3.6.1.4.1.2281.10.8.6.2.5.1
The table entry holds the Egress Shaper profiles at port level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProfilesL2ShaperEntry  

genEquipProfilesL2ShaperIndex 1.3.6.1.4.1.2281.10.8.6.2.5.1.1
Shaper Profile ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

genEquipProfilesL2ShaperDescription 1.3.6.1.4.1.2281.10.8.6.2.5.1.2
Shaper Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesL2ShaperCir 1.3.6.1.4.1.2281.10.8.6.2.5.1.3
Committed Information Rate (in Bits).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProfilesL2ShaperCbs 1.3.6.1.4.1.2281.10.8.6.2.5.1.4
Committed Burst Size (in Bytes).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..2048  

genEquipProfilesL2ShaperBurstType 1.3.6.1.4.1.2281.10.8.6.2.5.1.5
CBS burst type - short (minimal) size or long burst (recomanded for long RTT).
Status: mandatory Access: read-write
OBJECT-TYPE    
  BurstType  

genEquipProfilesL2ShaperRowStatus 1.3.6.1.4.1.2281.10.8.6.2.5.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipProfilesL3ServiceShaperTable 1.3.6.1.4.1.2281.10.8.6.2.6
The table holds the Egress Shaper profiles at service level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProfilesL3ServiceShaperEntry

genEquipProfilesL3ServiceShaperEntry 1.3.6.1.4.1.2281.10.8.6.2.6.1
The table entry holds the Egress Shaper profiles at service level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProfilesL3ServiceShaperEntry  

genEquipProfilesL3ServiceShaperIndex 1.3.6.1.4.1.2281.10.8.6.2.6.1.1
Shaper Profile ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..256  

genEquipProfilesL3ServiceShaperDescription 1.3.6.1.4.1.2281.10.8.6.2.6.1.2
Shaper Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesL3ServiceShaperCir 1.3.6.1.4.1.2281.10.8.6.2.6.1.3
Committed Information Rate (in Bits).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProfilesL3ServiceShaperCbs 1.3.6.1.4.1.2281.10.8.6.2.6.1.4
Committed Burst Size (in Bytes).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1016  

genEquipProfilesL3ServiceShaperPir 1.3.6.1.4.1.2281.10.8.6.2.6.1.5
Peak Information Rate (in Bits).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProfilesL3ServiceShaperPbs 1.3.6.1.4.1.2281.10.8.6.2.6.1.6
Peak Burst size (in Bytes).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1016  

genEquipProfilesL3ServiceShaperBurstType 1.3.6.1.4.1.2281.10.8.6.2.6.1.7
CBS and PBS burst type - short (minimal) size or long burst (recomanded for long RTT).
Status: mandatory Access: read-write
OBJECT-TYPE    
  BurstType  

genEquipProfilesL3ServiceShaperRowStatus 1.3.6.1.4.1.2281.10.8.6.2.6.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipProfilesEgressL4QueueShaperTable 1.3.6.1.4.1.2281.10.8.6.2.7
The table holds the Egress Shaper profiles at Queue level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipProfilesEgressL4QueueShaperEntry

genEquipProfilesEgressL4QueueShaperEntry 1.3.6.1.4.1.2281.10.8.6.2.7.1
The table entry holds the Egress Shaper profiles at Queue level.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipProfilesEgressL4QueueShaperEntry  

genEquipProfilesEgressL4QueueShaperIndex 1.3.6.1.4.1.2281.10.8.6.2.7.1.1
Shaper Profile ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

genEquipProfilesEgressL4QueueShaperDescription 1.3.6.1.4.1.2281.10.8.6.2.7.1.2
Shaper Description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..21)  

genEquipProfilesEgressL4QueueShaperCir 1.3.6.1.4.1.2281.10.8.6.2.7.1.3
Committed Information Rate (in Bits).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipProfilesEgressL4QueueShaperCbs 1.3.6.1.4.1.2281.10.8.6.2.7.1.4
Committed Burst Size (in Bytes).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1016  

genEquipProfilesEgressL4QueueShaperBurstType 1.3.6.1.4.1.2281.10.8.6.2.7.1.5
CBS burst type - short (minimal) size or long burst (recomanded for long RTT).
Status: mandatory Access: read-write
OBJECT-TYPE    
  BurstType  

genEquipProfilesEgressL4QueueShaperRowStatus 1.3.6.1.4.1.2281.10.8.6.2.7.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipTmConfig 1.3.6.1.4.1.2281.10.8.6.3
OBJECT IDENTIFIER    

genEquipTmL4WredAssociationTable 1.3.6.1.4.1.2281.10.8.6.3.1
The table holds the user selelcted WRED profile for eac Egress Queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmL4WredAssociationEntry

genEquipTmL4WredAssociationEntry 1.3.6.1.4.1.2281.10.8.6.3.1.1
The table entry holds the user selelcted WRED profile for eac Egress Queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmL4WredAssociationEntry  

genEquipTmL4WredAssociationIfIndex 1.3.6.1.4.1.2281.10.8.6.3.1.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipTmL4WredAssociationServiceIndex 1.3.6.1.4.1.2281.10.8.6.3.1.1.2
Service Bundle ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

genEquipTmL4WredAssociationCosQueueIndex 1.3.6.1.4.1.2281.10.8.6.3.1.1.3
CoS Queue ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmL4WredAssociationWredProfileId 1.3.6.1.4.1.2281.10.8.6.3.1.1.4
WRED Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

genEquipTmSchedulerCoSPriAssociationTable 1.3.6.1.4.1.2281.10.8.6.3.2
The table holds the user selected Scheduler Priority Profile for each Egress port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmSchedulerCoSPriAssociationEntry

genEquipTmSchedulerCoSPriAssociationEntry 1.3.6.1.4.1.2281.10.8.6.3.2.1
The table entry holds the user selected Scheduler Priority Profile for each Egress port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmSchedulerCoSPriAssociationEntry  

genEquipTmSchedulerCoSPriAssociationIfIndex 1.3.6.1.4.1.2281.10.8.6.3.2.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipTmSchedulerCoSPriAssociationAssociatedProfileId 1.3.6.1.4.1.2281.10.8.6.3.2.1.2
Queue Scheduler Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..9  

genEquipTmL3ServiceShaperAssociationTable 1.3.6.1.4.1.2281.10.8.6.3.3
The table holds the user selected Shapping profiles for each Service Bundle.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmL3ServiceShaperAssociationEntry

genEquipTmL3ServiceShaperAssociationEntry 1.3.6.1.4.1.2281.10.8.6.3.3.1
The table entry holds the user selected Shapping profiles for each Service Bundle.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmL3ServiceShaperAssociationEntry  

genEquipTmL3ServiceShaperAssociationIfIndex 1.3.6.1.4.1.2281.10.8.6.3.3.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipTmL3ServiceShaperAssociationServiceClassIndex 1.3.6.1.4.1.2281.10.8.6.3.3.1.2
Service Bundle ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

genEquipTmL3ServiceShaperAssociationShaperProfileId 1.3.6.1.4.1.2281.10.8.6.3.3.1.3
Shaper Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipTmL3ServiceShaperAssociationShaperAdmin 1.3.6.1.4.1.2281.10.8.6.3.3.1.4
Shaper Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipTmL3ServiceShaperAssociationRowStatus 1.3.6.1.4.1.2281.10.8.6.3.3.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipTmL2ShaperAssociationTable 1.3.6.1.4.1.2281.10.8.6.3.4
The table holds the user selected Shapping profiles for each Ethernet Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmL2ShaperAssociationEntry

genEquipTmL2ShaperAssociationEntry 1.3.6.1.4.1.2281.10.8.6.3.4.1
The table entry holds the user selected Shapping profiles for each Ethernet Port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmL2ShaperAssociationEntry  

genEquipTmL2ShaperAssociationIfIndex 1.3.6.1.4.1.2281.10.8.6.3.4.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipTmL2ShaperAssociationProfileId 1.3.6.1.4.1.2281.10.8.6.3.4.1.2
Port Shaper Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

genEquipTmL2ShaperAssociationAdmin 1.3.6.1.4.1.2281.10.8.6.3.4.1.3
Port Shaper Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipTmL2ShaperAssociationRowStatus 1.3.6.1.4.1.2281.10.8.6.3.4.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipTmL4QueueShaperAssociationTable 1.3.6.1.4.1.2281.10.8.6.3.5
The table holds the user selected Shapping profiles for each Ethernet PortThe table holds the user selected Shapping profiles for each transmitting Queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmL4QueueShaperAssociationEntry

genEquipTmL4QueueShaperAssociationEntry 1.3.6.1.4.1.2281.10.8.6.3.5.1
The table entry holds the user selected Shapping profiles for each transmitting Queue.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmL4QueueShaperAssociationEntry  

genEquipTmL4QueueShaperAssociationIfIndex 1.3.6.1.4.1.2281.10.8.6.3.5.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipTmL4QueueShaperAssociationServiceIndex 1.3.6.1.4.1.2281.10.8.6.3.5.1.2
Service Bundle ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..63  

genEquipTmL4QueueShaperAssociationCosQueueIndex 1.3.6.1.4.1.2281.10.8.6.3.5.1.3
CoS Queue ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

genEquipTmL4QueueShaperAssociationShaperProfileId 1.3.6.1.4.1.2281.10.8.6.3.5.1.4
Queue Shaper Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

genEquipTmL4QueueShaperAssociationShaperProfileAdmin 1.3.6.1.4.1.2281.10.8.6.3.5.1.5
Queue Shaper Admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipTmL4QueueShaperAssociationRowStatus 1.3.6.1.4.1.2281.10.8.6.3.5.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipTmSchedulerWfqAssociationTable 1.3.6.1.4.1.2281.10.8.6.3.6
The table holds the user selected Scheduler WFQ weights Profile for each Egress port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipTmSchedulerWfqAssociationEntry

genEquipTmSchedulerWfqAssociationEntry 1.3.6.1.4.1.2281.10.8.6.3.6.1
The table entry holds the user selected Scheduler WFQ weights Profile for each Egress port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipTmSchedulerWfqAssociationEntry  

genEquipTmSchedulerWfqAssociationIfIndex 1.3.6.1.4.1.2281.10.8.6.3.6.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipTmSchedulerWfqAssociationProfileId 1.3.6.1.4.1.2281.10.8.6.3.6.1.2
WFQ Scheduler Profile ID
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..7  

genEquipSynchronizationRadioClkSrcSource 1.3.6.1.4.1.2281.10.8.3.3
This parameters determines whether the system reference frequency is transported through the radio. 0 indicates that the outgoing signal takes its clock from an independant local clock. channel number indicates that the clock is from that radio-channel reference clock, as taken from the synchronization source interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationSDHClkSrcSource 1.3.6.1.4.1.2281.10.8.3.4
This parameters determines whether the system reference frequency is transported through the interface. if value is 0 it indicates that the outgoing signal takes its clock from an independant local clock. system-clock-source indicates that the clock is from the system reference clock, as taken from the synchronization source interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationPDHClkSrcTable 1.3.6.1.4.1.2281.10.8.3.5
Synchronization source table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipSynchronizationPDHClkSrcEntry

genEquipSynchronizationPDHClkSrcEntry 1.3.6.1.4.1.2281.10.8.3.5.1
Synchronization source table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipSynchronizationPDHClkSrcEntry  

genEquipSynchronizationPDHClkSrcIFNum 1.3.6.1.4.1.2281.10.8.3.5.1.2
This parameters the interface which is configured to take the system reference clock or a local clock in genEquipSynchronizationSDHClkSrcSource. The number indicates the E1/DS1 interface being configured (1-32).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationPDHClkSrcSource 1.3.6.1.4.1.2281.10.8.3.5.1.3
This parameters determines whether the system reference frequency is transported through the interface defined in genEquipSynchronizationPDHClkSrcIFNum. local-clock indicates that the outgoing signal takes its clock from an independant local clock. system-clock-source indicates that the clock is from the system reference clock, as taken from the synchronization source interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local-clock(0), system-clock-source(1)  

genEquipSynchronizationPRCRegeneratorMode 1.3.6.1.4.1.2281.10.8.3.6
This parameter sets the IDU to point-to-point PRC quality frequency distribution mode. Notice that this is relevant only for smart pipe applications
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipSynchronizationPRCRegeneratorDirection 1.3.6.1.4.1.2281.10.8.3.7
This parameter sets the direction in which the frequency signal is transported, in the case of electrical GBE interfaces. Notice that for optical interfaces, this parameter has no effect.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER line-to-radio(0), radio-to-line(1)  

genEquipSynchronizationSrcRevertiveTimer 1.3.6.1.4.1.2281.10.8.3.8
this parameter sets the timeout (in seconds) for a counter which is set once an interface recovers from a failure; after this timeout the interface will be considered stable and can be used as a synchronization source. A value of zero means no timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..30  

genEquipSynchronizationSrcActiveSyncSourceIndex 1.3.6.1.4.1.2281.10.8.3.9
The active synchronization source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationNodeMode 1.3.6.1.4.1.2281.10.8.3.10
This parameter allows forcing a certain source as the active source for the system reference clock. When forced, the active source is specified by genEquipSynchronizationForceSource. In automatic mode, the active source is determined by quality and priority of the relevant interfaces (as configured in table genEquipSynchronizationSrcTable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER automatic(0), force(1)  

genEquipSynchronizationForceSource 1.3.6.1.4.1.2281.10.8.3.11
This parameter determines which source number will be forced as active when genEquipSynchronizationNodeMode is set to force.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..8  

genEquipSynchronizationSystemReferenceQuality 1.3.6.1.4.1.2281.10.8.3.12
This parameter shows the current quality of the system reference clock
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER automatic(0), prs(1), g811(2), transit-node(3), ssu-a(4), unknown(5), stratum2(7), ssu-b(8), stratum3(10), g813-8262(11), smc(12), stratum3e(13), do-not-use(15)  

genEquipSynchronizationRegeneratorSSMAdmin 1.3.6.1.4.1.2281.10.8.3.13
This parameter determines whether or not in pipe mode the system generates SSM messages
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationPWClkExport 1.3.6.1.4.1.2281.10.8.3.14
This parameter determines whether the system reference clock is exported toward the PWE3 T-Card; This reference can be exported towards front panel using ExportClkFrontPannel or used as a common clock for PWs using ClockSourceRef. Notice that either this or any single one of the PW T-card TDM interfaces can export the reference clock, but not both at the same time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local-clock(0), system-clock-source(1)  

genEquipSynchronizationPipeTable 1.3.6.1.4.1.2281.10.8.3.20
The table shows pipe interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipSynchronizationPipeEntry

genEquipSynchronizationPipeEntry 1.3.6.1.4.1.2281.10.8.3.20.1
The table entry shows pipe interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipSynchronizationPipeEntry  

genEquipSynchronizationPipeId 1.3.6.1.4.1.2281.10.8.3.20.1.1
Pipe ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationPipeInd1 1.3.6.1.4.1.2281.10.8.3.20.1.2
Sync Interface 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationPipeInd2 1.3.6.1.4.1.2281.10.8.3.20.1.3
Sync Interface 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationPipeStatus 1.3.6.1.4.1.2281.10.8.3.20.1.4
Sync Pipe Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationPTP 1.3.6.1.4.1.2281.10.8.3.21
OBJECT IDENTIFIER    

genEquipSynchronizationPTPTcAdmin 1.3.6.1.4.1.2281.10.8.3.21.1
Transparent Clock (TC) administrative state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationPTPTcConfigTable 1.3.6.1.4.1.2281.10.8.3.21.10
PTP (Precision Time Protocol) TC (Transparent Clock) configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipSynchronizationPTPTcConfigEntry

genEquipSynchronizationPTPTcConfigEntry 1.3.6.1.4.1.2281.10.8.3.21.10.1
PTP (Precision Time Protocol) TC (Transparent Clock) configuration table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipSynchronizationPTPTcConfigEntry  

genEquipSynchronizationPTPTcConfigId 1.3.6.1.4.1.2281.10.8.3.21.10.1.1
The interface on which TC function is required.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationPTPTcConfigMaster 1.3.6.1.4.1.2281.10.8.3.21.10.1.2
Points whether the interface's direction is upstream or downstream.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER upstream(0), downstream(1)  

genEquipSynchronizationPTPTcStatusTable 1.3.6.1.4.1.2281.10.8.3.21.11
PTP (Precision Time Protocol) TC (Transparent Clock) status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipSynchronizationPTPTcStatusEntry

genEquipSynchronizationPTPTcStatusEntry 1.3.6.1.4.1.2281.10.8.3.21.11.1
PTP (Precision Time Protocol) TC (Transparent Clock) status table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipSynchronizationPTPTcStatusEntry  

genEquipSynchronizationPTPTcStatusId 1.3.6.1.4.1.2281.10.8.3.21.11.1.1
The interface on which TC status is required.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipSynchronizationPTPTcStatusState 1.3.6.1.4.1.2281.10.8.3.21.11.1.2
The status of the TC function that may be: Down, Init, Calibrating or Up.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(0), init(1), calibrating(2), up(3)  

genEquipSynchronizationPTPTcStatusFreqLock 1.3.6.1.4.1.2281.10.8.3.21.11.1.3
The lock status, Up or Down, of the network synchronization frequency that passes through the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipInterfaces 1.3.6.1.4.1.2281.10.9
OBJECT IDENTIFIER    

genEquipInterfacesEther 1.3.6.1.4.1.2281.10.9.1
OBJECT IDENTIFIER    

genEquipInterfacesEtherTable 1.3.6.1.4.1.2281.10.9.1.1
Ethernet interface configuration and status table. The index of the table is via ifIndex, as well as the operational status and the admin state, speed and port connector.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesEtherEntry

genEquipInterfacesEtherEntry 1.3.6.1.4.1.2281.10.9.1.1.1
Ethernet interface configuration and status table. The index of the table is via ifIndex, as well as the operational status and the admin state, speed and port connector.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesEtherEntry  

genEquipInterfacesEtherConnType 1.3.6.1.4.1.2281.10.9.1.1.1.1
The physical interface type. For port 8 the only valid value is radio. For ports 3 to 7 the only valid value is rj45.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), rj45(0), electricalSFP(1), opticalSFP(2), radio(3), sfp100base-fx(4)  

genEquipInterfacesEtherPortType 1.3.6.1.4.1.2281.10.9.1.1.1.2
The type of the port. Access - untagged port (in case of managed switch). Trunk - C-VID tagged port (in case of managed switch). CN - Don't care on the vlan tag (in case of metro switch configuration). SN - S-VID is used as the first vlan (in case of metro switch configuration).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), access(0), trunk(1), hybrid(2), cN(3), pN(4), management(30), wayside(31)  

genEquipInterfacesEtherAutoNegotiation 1.3.6.1.4.1.2281.10.9.1.1.1.3
Enable or disable auto-negotiation on the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), off(0), on(1)  

genEquipInterfacesEtherDuplex 1.3.6.1.4.1.2281.10.9.1.1.1.4
Half or full duplex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HalfFull  

genEquipInterfacesEtherRate 1.3.6.1.4.1.2281.10.9.1.1.1.5
10, 100 OR 1000 Mbps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RateMbps  

genEquipInterfacesEtherPortLerningAdmin 1.3.6.1.4.1.2281.10.9.1.1.1.6
Enable or disable MAC address learning in the port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), enable(2), disable(3)  

genEquipInterfacesEtherFlowCtrl 1.3.6.1.4.1.2281.10.9.1.1.1.7
Enable or disable flow control on the port. Supported only in pipe mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), off(0), on(1), na(2)  

genEquipInterfacesEtherLagPortMember 1.3.6.1.4.1.2281.10.9.1.1.1.8
The syntax is ifIndex, or FFFF for port that is not member in a lag.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), not-aggrigated(0), group-1(1), group-2(2), group-3(3)  

genEquipInterfacesEtherActualDuplex 1.3.6.1.4.1.2281.10.9.1.1.1.9
Actual duplex (in auto-negotiation, the mode the two ports agreed upon) - Half or full duplex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HalfFull  

genEquipInterfacesEtherActualRate 1.3.6.1.4.1.2281.10.9.1.1.1.10
Actual rate (in auto-negotiation, the rate the two ports agreed upon) - 10, 100 OR 1000 Mbps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RateMbps  

genEquipInterfacesEtherClkSrc 1.3.6.1.4.1.2281.10.9.1.1.1.11
The source for the outgoing carrier signal clock. Local-clock is an internal independent oscilator. system-clock-source causes the ethernet clock to be derived from the defined system clock source (which can be taken from another interface) Note: changing this parameter per port affect all the Ethernet ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), local-clock(0), system-clock-source(1)  

genEquipInterfacesEtherPortServiceType 1.3.6.1.4.1.2281.10.9.1.1.1.12
This parameter indicates whether the port is being used as a Service Access Point (SAP) or as a Service Network Point (SNP) in a network-wide Ethernet service; the parameter has no functionality, but is meant to hold data for the NMS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), sap(0), snp(1)  

genEquipInterfacesEtheMACAddress 1.3.6.1.4.1.2281.10.9.1.1.1.13
The MAC address of the port for CFM or PWE3 addressing purposes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

genEquipInterfacesEtherDefaultVLANId 1.3.6.1.4.1.2281.10.9.1.1.1.14
Default VLAN ID of the Ethernet interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4090  

genEquipInterfacesEtherPortBlockSharedVlans 1.3.6.1.4.1.2281.10.9.1.1.1.15
When enabled, this parameter blocks transfer of Ethernet frames to/from other ports for which it is enabled, effectively eliminating all shared VLANs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesEtherStatePropagation 1.3.6.1.4.1.2281.10.9.1.2
This parameter configures the behavior of Ethernet ports in single pipe mode. When a failure is detected, ports will be automatically shut down when the configured conditions take place. The possible choices are a combination of the following failures in the local and the remote IDUs: radio LOF, Ethernet line LOC, radio excessive ber
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), lof-loc(1), lof-loc-excber(3), lof-loc-remote(5), lof-loc-excber-remote(7), lof(9), lof-excber(11), lof-remote(13), lof-excber-remote(15)  

genEquipInterfacesEtherPWPort 1.3.6.1.4.1.2281.10.9.1.3
The port in the traffic bridge connected to the PWE3 T-card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipInterfacesE1T1 1.3.6.1.4.1.2281.10.9.2
OBJECT IDENTIFIER    

genEquipInterfacesE1T1PortGroupTable 1.3.6.1.4.1.2281.10.9.2.1
General parameters for group of E1 or T1 interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesE1T1PortGroupEntry

genEquipInterfacesE1T1PortGroupEntry 1.3.6.1.4.1.2281.10.9.2.1.1
General parameters for group of E1 or T1 interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesE1T1PortGroupEntry  

genEquipInterfacesE1T1PortGroupId 1.3.6.1.4.1.2281.10.9.2.1.1.1
Group id. the index of this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesE1T1PortGroupLineCode 1.3.6.1.4.1.2281.10.9.2.1.1.2
The PDH line coding. b8zs is for T1 and hdb3 for E1. ami is only for T1. This parameter is relevant only for versions up to 6.6.0.0.1.53 (including).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b8zs(1), ami(2), hdb3(3)  

genEquipInterfacesE1T1PortGroupExcessiveBERthreshold 1.3.6.1.4.1.2281.10.9.2.1.1.3
Excessive BER threshold for the group of E1s/T1s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  BerLevel  

genEquipInterfacesE1T1PortGroupSignalDegradeThreshold 1.3.6.1.4.1.2281.10.9.2.1.1.4
Signal degrade threshold for the group of E1s/T1s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n1e-6(3), n1e-7(4), n1e-8(5), n1e-9(6)  

genEquipInterfacesE1T1PortGroupLineCode1to8 1.3.6.1.4.1.2281.10.9.2.1.1.5
The PDH line coding for line interfaces 1 to 8. b8zs is for T1 and hdb3 for E1. ami is only for T1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b8zs(1), ami(2), hdb3(3)  

genEquipInterfacesE1T1PortGroupLineCode9to16 1.3.6.1.4.1.2281.10.9.2.1.1.6
The PDH line coding for line interfaces 9 to 16. b8zs is for T1 and hdb3 for E1. ami is only for T1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b8zs(1), ami(2), hdb3(3)  

genEquipInterfacesE1T1PortGroupLineCode17to24 1.3.6.1.4.1.2281.10.9.2.1.1.7
The PDH line coding for line interfaces 17 to 24. b8zs is for T1 and hdb3 for E1. ami is only for T1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b8zs(1), ami(2), hdb3(3)  

genEquipInterfacesE1T1PortGroupLineCode25to32 1.3.6.1.4.1.2281.10.9.2.1.1.8
The PDH line coding for interfaces 25 to 32. b8zs is for T1 and hdb3 for E1. ami is only for T1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER b8zs(1), ami(2), hdb3(3)  

genEquipInterfacesE1T1Table 1.3.6.1.4.1.2281.10.9.2.2
E1/T1 interface configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesE1T1Entry

genEquipInterfacesE1T1Entry 1.3.6.1.4.1.2281.10.9.2.2.1
E1/T1 interface configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesE1T1Entry  

genEquipInterfacesE1T1Priority 1.3.6.1.4.1.2281.10.9.2.2.1.1
The ACM priority of the E1/T1. This parameter is relevant only for stand-alone mode. In shelf this parameter is defined in the trail configuration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER low(1), high(2)  

genEquipInterfacesE1T1CurrBER 1.3.6.1.4.1.2281.10.9.2.2.1.2
E1/T1 current BER.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BerLevel  

genEquipInterfacesE1T1Loopback 1.3.6.1.4.1.2281.10.9.2.2.1.3
Enable or Disable line loopback on the E1/T1 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), towardsLine(2), towardsRadio(3)  

genEquipInterfacesE1T1AISSStatus 1.3.6.1.4.1.2281.10.9.2.2.1.4
Status of the AIS detection, if the AIS detection is activated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER detected(0), notDetected(1)  

genEquipInterfacesE1T1CableLength 1.3.6.1.4.1.2281.10.9.2.2.1.5
This parameter is valid only for T1 interfaces, and determines cable length range.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER len-0-133ft-0-41m(1), len-133ft-266ft-41m-81m(2), len-266ft-399ft-81m-122m(3), len-399ft-533ft-122m-162m(4), len-533ft-655ft-162m-200m(5)  

genEquipInterfacesAux 1.3.6.1.4.1.2281.10.9.3
OBJECT IDENTIFIER    

genEquipInterfacesAuxWaySide 1.3.6.1.4.1.2281.10.9.3.1
OBJECT IDENTIFIER    

genEquipInterfacesAuxWaySideTable 1.3.6.1.4.1.2281.10.9.3.1.1
Way-side interface configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesAuxWaySideEntry

genEquipInterfacesAuxWaySideEntry 1.3.6.1.4.1.2281.10.9.3.1.1.1
Way-side interface configuration.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesAuxWaySideEntry  

genEquipInterfacesAuxWaySideAdmin 1.3.6.1.4.1.2281.10.9.3.1.1.1.1
Enable - Set Ethernet port #4 to be a wayside port. Disabling this option will cause the port to behave as a normal traffic Ethernet port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesAuxWaySideCapacity 1.3.6.1.4.1.2281.10.9.3.1.1.1.2
Narrow band (64Kbps) or Wide band (2Mbps)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER narrow(0), wide(1)  

genEquipInterfacesAuxWaySideAutoNegotiation 1.3.6.1.4.1.2281.10.9.3.1.1.1.3
Wayside port auto negotiation (Off, on)
Status: mandatory Access: read-write
OBJECT-TYPE    
  OffOn  

genEquipInterfacesAuxWaySideDuplex 1.3.6.1.4.1.2281.10.9.3.1.1.1.4
Wayside port duplex (Half, Full)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), half(0), full(1)  

genEquipInterfacesAuxWaySideRate 1.3.6.1.4.1.2281.10.9.3.1.1.1.5
Wayside interface port rate (10Mbps,100Mbps)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-applicable(-1), n10(0), n100(1)  

genEquipInterfacesAuxUserChanTable 1.3.6.1.4.1.2281.10.9.3.2
Table of configured user channels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesAuxUserChanEntry

genEquipInterfacesAuxUserChanEntry 1.3.6.1.4.1.2281.10.9.3.2.1
Table of configured user channels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesAuxUserChanEntry  

genEquipInterfacesAuxUserChanType 1.3.6.1.4.1.2281.10.9.3.2.1.1
User channel type. The asynchronous modes allow two channels, one in each port. The twin asynchronous mode uses port 1 for v.11 and port 2 for RS-232. The Synchronous modes use two ports each
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER asynchronous-rs232(1), asynchronous-v-11(2), twin-asynchronous-rs232-and-v-11(3), synchronous-v-11-codirectional(4), synchronous-v-11-contradirectional(5)  

genEquipInterfacesSdh 1.3.6.1.4.1.2281.10.9.4
OBJECT IDENTIFIER    

genEquipInterfacesSdhTable 1.3.6.1.4.1.2281.10.9.4.1
STM-1,OC-3 interface configuration and status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesSdhEntry

genEquipInterfacesSdhEntry 1.3.6.1.4.1.2281.10.9.4.1.1
STM-1,OC-3 interface configuration and status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesSdhEntry  

genEquipInterfacesSdhMuteTx 1.3.6.1.4.1.2281.10.9.4.1.1.1
Mute Tx option on the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipInterfacesSdhClockSource 1.3.6.1.4.1.2281.10.9.4.1.1.2
The source of the clock being used. sync-vc option is for future support, to use one of the outgoing TDM VCs as a source.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER internal-clock(0), loop(1), synchronization-vc(2)  

genEquipInterfacesSdhAISAdmin 1.3.6.1.4.1.2281.10.9.4.1.1.3
Enable, Disable AIS signaling at the V5 byte on the STM-1, OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesSdhTraceIdReceived 1.3.6.1.4.1.2281.10.9.4.1.1.4
J0 Trace Identifier signal that was received on the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipInterfacesSdhTraceIdTransmitted 1.3.6.1.4.1.2281.10.9.4.1.1.5
J0 Trace Identifier signal that is transmitted on the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipInterfacesSdhTraceIdExpected 1.3.6.1.4.1.2281.10.9.4.1.1.6
J0 Trace Identifier signal that is expected to be received on the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipInterfacesSdhTraceIdStringLength 1.3.6.1.4.1.2281.10.9.4.1.1.7
Trace identifier string length. Lengths 0 and 15 are valid for SDH systems. Length 62 is additionally available in SONET systems.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER len1(0), len15(1), len62(2)  

genEquipInterfacesSdhExcessiveBer 1.3.6.1.4.1.2281.10.9.4.1.1.8
Excessive BER threshold on the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n1e-3(0), n1e-4(1), n1e-5(2)  

genEquipInterfacesSdhSignalDegrade 1.3.6.1.4.1.2281.10.9.4.1.1.9
Signal degrade threshold on the interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER n1e-6(3), n1e-7(4), n1e-8(5), n1e-9(6)  

genEquipInterfacesSdhLoopback 1.3.6.1.4.1.2281.10.9.4.1.1.10
SDH Loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), loopback-towards-system(1), loopback-towards-line(2)  

genEquipInterfacesSdhClockSourceStatus 1.3.6.1.4.1.2281.10.9.4.1.1.11
The actual source of the clock for the outgoing STM-1/OC-3 signal. It may differ from the desired source if the source signal is missing or corrupt
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER internal-clock(0), loop(1), synchronization-vc(2)  

genEquipInterfacesSdhLineTxProtectionMode 1.3.6.1.4.1.2281.10.9.4.1.1.12
this parameter configures the behavior of the transmitting line in a 1+1 HSB configuration. In normal mode the stand-by signal is silenced. In uni-directional MSP both units will transmit
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), uni-directional-MSP(2)  

genEquipInterfacesSdhSyncVC 1.3.6.1.4.1.2281.10.9.4.1.1.13
The outgoing VC signal to be taken as the STM-1/OC-3 synchronization source if genEquipInterfacesSdhClockSource is set to synchronization-vc
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..63  

genEquipInterfacesSdhAdmin 1.3.6.1.4.1.2281.10.9.4.1.1.14
Administrative status of the STM-1/OC3 port
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipInterfacesSdhPdhTimingMode 1.3.6.1.4.1.2281.10.9.4.1.1.15
Clock reference for outgoing PDH signals configured in 'absolute clock' mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipInterfacesSdhSlot 1.3.6.1.4.1.2281.10.9.4.1.1.16
Slot ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhIdleCode 1.3.6.1.4.1.2281.10.9.4.1.1.17
Value to be transmitted at PDH signals inside the STM-1/OC3 when there is no data to transmit
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhSSMAdmin 1.3.6.1.4.1.2281.10.9.4.1.1.18
SSM support admin for this interface
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipInterfacesSdhSSMPattern 1.3.6.1.4.1.2281.10.9.4.1.1.19
Indicates the default SSM pattern to be transmitted in case if TCC clock synchronization subsystem doesn't provide SSM pattern value
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhTraceIdAdmin 1.3.6.1.4.1.2281.10.9.4.1.1.20
Enable/disable of J0 mismatch checking on RX direction
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipInterfacesSdhVCSignalLabel 1.3.6.1.4.1.2281.10.9.4.1.1.21
Sets the signal label bits to be sent and expected in every VC-11/12; use non-specific payload only for backwards compatibility with old equipment
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER asynchronous(0), non-specific-payload(1)  

genEquipInterfacesSdhVcRdiAdmin 1.3.6.1.4.1.2281.10.9.4.1.1.22
VC-RDI signaling admin status
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipInterfacesSdhLpVcTable 1.3.6.1.4.1.2281.10.9.4.2
This table includes properties for each Low-order path VC (VC-11/12) in the SDH interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesSdhLpVcEntry

genEquipInterfacesSdhLpVcEntry 1.3.6.1.4.1.2281.10.9.4.2.1
This table includes properties for each Low-order path VC (VC-11/12) in the SDH interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesSdhLpVcEntry  

genEquipInterfacesSdhLpVcId 1.3.6.1.4.1.2281.10.9.4.2.1.1
VC-11 or VC-12 number; VCs are numbered according to standard KLM order.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..84  

genEquipInterfacesSdhLpVcAIS 1.3.6.1.4.1.2281.10.9.4.2.1.2
Indicates whether incoming AIS is currently detected in the VC's payload. 0 indicates that AIS is detected, 1 that is not detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER aisDetected(0), aisNotDetected(1)  

genEquipInterfacesSdhStatusTable 1.3.6.1.4.1.2281.10.9.4.3
SDH Status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesSdhStatusEntry

genEquipInterfacesSdhStatusEntry 1.3.6.1.4.1.2281.10.9.4.3.1
SDH Status
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesSdhStatusEntry  

genEquipInterfacesSdhStatusIfIndex 1.3.6.1.4.1.2281.10.9.4.3.1.1
Portnumber
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhStatusLine 1.3.6.1.4.1.2281.10.9.4.3.1.2
Bitmap field according to the following values: no-defect (1), AIS (2), RDI (4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhStatusOperState 1.3.6.1.4.1.2281.10.9.4.3.1.3
Interface operational status
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipInterfacesSdhStatusRegenerator 1.3.6.1.4.1.2281.10.9.4.3.1.4
Bitmap field according to the following values: no-defect (1), AIS (2), RDI (4)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhStatusClockSourceStatus 1.3.6.1.4.1.2281.10.9.4.3.1.5
The actual source of the clock for the outgoing STM-1/OC-3 signal. It may differ from the desired source if the source signal is missing or corrupt
Status: mandatory Access: read-only
OBJECT-TYPE    
  PWPDHClockSource  

genEquipInterfacesSdhStatusPdhClockStatus 1.3.6.1.4.1.2281.10.9.4.3.1.6
PDH clock source status
Status: mandatory Access: read-only
OBJECT-TYPE    
  PWPDHClockSource  

genEquipInterfacesSdhStatusSlotId 1.3.6.1.4.1.2281.10.9.4.3.1.7
Slot ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhStatusLoopback 1.3.6.1.4.1.2281.10.9.4.3.1.8
The current state of the loopback for the SONET/SDH interface
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER off(0), towards-system(1), towards-line(2)  

genEquipInterfacesSdhStatusMultiplexer 1.3.6.1.4.1.2281.10.9.4.3.1.9
Bitmask: no-defect (1), STS-LOP(2), STS-AIS(4), STS-RDI(8), unequipped (16), label-mismatch (32)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhStatusSsmRx 1.3.6.1.4.1.2281.10.9.4.3.1.10
Indicates the currently received SSM bits
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhStatusSsmTx 1.3.6.1.4.1.2281.10.9.4.3.1.11
Indicates the currently transmitted SSM bits
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhLoopbackStatusTable 1.3.6.1.4.1.2281.10.9.4.4
SONET/SDH interface loopback status
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesSdhLoopbackStatusEntry

genEquipInterfacesSdhLoopbackStatusEntry 1.3.6.1.4.1.2281.10.9.4.4.1
SONET/SDH interface loopback status entry
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesSdhLoopbackStatusEntry  

genEquipInterfacesSdhLoopbackStatusIfIndex 1.3.6.1.4.1.2281.10.9.4.4.1.1
Portnumber
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhLoopbackStatusSlotId 1.3.6.1.4.1.2281.10.9.4.4.1.2
Slot ID
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesSdhLoopbackStatusType 1.3.6.1.4.1.2281.10.9.4.4.1.3
Interface operational status
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(0), towards-system(1), towards-line(2)  

genEquipInterfacesSdhLoopbackStatusCounter 1.3.6.1.4.1.2281.10.9.4.4.1.4
Current value of STM1/OC3 interface Looback Timeout Counter
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesAIS 1.3.6.1.4.1.2281.10.9.5
OBJECT IDENTIFIER    

genEquipInterfacesAISAdmin 1.3.6.1.4.1.2281.10.9.5.1
Control AIS Detection over all E1/T1/SDH ports.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesASP 1.3.6.1.4.1.2281.10.9.6
OBJECT IDENTIFIER    

genEquipInterfacesASPAdmin 1.3.6.1.4.1.2281.10.9.6.1
Controls the Automatic State Propagation
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesASPLocalLOC 1.3.6.1.4.1.2281.10.9.6.2
Enables fault propagation upon detection of local LOC. This configuration is relevant only for non-protected single-pipe switch mode only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesASPLocalExcessiveBER 1.3.6.1.4.1.2281.10.9.6.3
Enables fault propagation to the Ethernet interface upon detection of radio excessive BER. This configuration is relevant only for non-protected single-pipe switch mode only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesASPACMthreshold 1.3.6.1.4.1.2281.10.9.6.4
Enable or disable the propagation when Radio ACM profile degrades below a defined profile. This configuration is relevant only for non-protected single-pipe switch mode only when ACM radio script is running.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER profile-0(0), profile-1(1), profile-2(2), profile-3(3), profile-4(4), profile-5(5), profile-6(6), profile-7(7)  

genEquipInterfacesASPRemoteFault 1.3.6.1.4.1.2281.10.9.6.5
This parameter enables/disables automatic state propagation. The following remote faults are propagated to the NE by default: - Radio LOF - Radio link ID mismatch - Ethernet line LOC any other remote faults are propagated to the NE only if they are enabled at the local NE
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASP 1.3.6.1.4.1.2281.10.9.6.7
OBJECT IDENTIFIER    

genEquipInterfacesNGASPConfigTable 1.3.6.1.4.1.2281.10.9.6.7.1
This table configures automatic state propagation functionality.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesNGASPConfigEntry

genEquipInterfacesNGASPConfigEntry 1.3.6.1.4.1.2281.10.9.6.7.1.1
This table configures automatic state propagation functionality entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesNGASPConfigEntry  

genEquipInterfacesNGASPConfigControlledInterfaceIfindex 1.3.6.1.4.1.2281.10.9.6.7.1.1.1
Index of the controlled interface. This interface will be disabled upon initiation of auto state propagation
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGASPConfigAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.2
Enables/disables automatic state propagation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigMonitoredInterfaceIfindex 1.3.6.1.4.1.2281.10.9.6.7.1.1.3
Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGASPConfigAcmThreshold 1.3.6.1.4.1.2281.10.9.6.7.1.1.4
ACM profile threshold for initiating auto state propagation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGASPConfigRadioExcessiveBerCriterionAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.5
Initiate auto state propagation upon local radio excessive BER.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigLinkIdMismatchCriterionAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.6
Initiate auto state propagation upon local radio link Id mismatch.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigRadioLofCriterionAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.7
Initiate auto state propagation upon local radio LOF.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigRemoteRadioLofCriterionAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.8
Initiate auto state propagation upon remote radio LOF.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigRxAcmThresholdCriterionAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.9
Initiate auto state propagation upon radio ACM RX profile below threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigTxAcmThresholdCriterionAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.10
Initiate auto state propagation upon radio ACM TX profile below threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigRemoteEthLocCriterionAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.11
Initiate auto state propagation due to remote ethernet LOC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigRemoteFaultTriggerAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.12
Auto state propagation trigger by remote fault.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigRemoteRadioExcessiveBerCriterionAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.13
Initiate auto state propagation upon remote radio excessive BER.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigMonitoredInterface56 1.3.6.1.4.1.2281.10.9.6.7.1.1.14
Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGASPConfigCsfModeAdmin 1.3.6.1.4.1.2281.10.9.6.7.1.1.15
This mode upon failure sends CSF OAM packet instead of shuting down port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesNGASPConfigMonitoredInterface 1.3.6.1.4.1.2281.10.9.6.7.1.1.16
Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGASPConfigDelayTime 1.3.6.1.4.1.2281.10.9.6.7.1.1.17
Debounce time for ASP (in milliseconds)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGASPConfigRowStatus 1.3.6.1.4.1.2281.10.9.6.7.1.1.30
Row status to allow user add entries dynamically.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipInterfacesPW 1.3.6.1.4.1.2281.10.9.7
OBJECT IDENTIFIER    

genEquipInterfacesPWCardTable 1.3.6.1.4.1.2281.10.9.7.1
PW-Card configuration table. using the table to configure the system PW-T features.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesPWCardEntry

genEquipInterfacesPWCardEntry 1.3.6.1.4.1.2281.10.9.7.1.1
PW-Card configuration table. using the table to configure the system PW-T features.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesPWCardEntry  

genEquipInterfacesPWCardSlotNumber 1.3.6.1.4.1.2281.10.9.7.1.1.1
Slot number where the relevant PW card is inserted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..12  

genEquipInterfacesPWCardExportClkSysRef 1.3.6.1.4.1.2281.10.9.7.1.1.2
Which card clock to provide as source towards system reference clock; FrontPanel takes the clock inserted into the front panel interface; ClockRecovery takes the clock recovered from the PW service mapped to the TDM port defined in ExportClkSysRefCrPort.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), frontPanel(1), clockRecovery(2)  

genEquipInterfacesPWCardExportClkFrontPannel 1.3.6.1.4.1.2281.10.9.7.1.1.3
Which clock to export to the front panel clock; SysRefClk exports the system reference clock; ClockRecovery exports the clock recovered from the PW service mapped to the TDM port defined in ExportClkFrontPanelCrPort.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), sysRefClk(1), clockRecovery(2)  

genEquipInterfacesPWCardExportClkSysRefCrPort 1.3.6.1.4.1.2281.10.9.7.1.1.4
TDM port serving as clock recovery reference if ExportClkSysRef is set to ClockRecovery.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesPWCardExportClkFrontPanelCrPort 1.3.6.1.4.1.2281.10.9.7.1.1.5
TDM port serving as clock recovery reference if ExportClkFrontPannel is set to ClockRecovery.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesPWCardFrontPanelClockSignalInput 1.3.6.1.4.1.2281.10.9.7.1.1.6
Configure the type of input clock signal of the front panel port. Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sync(0), e1t1(1)  

genEquipInterfacesPWCardFrontPanelClockSignalOutp 1.3.6.1.4.1.2281.10.9.7.1.1.7
Configure the type of output clock signal of the front panel port. Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER sync(0), e1t1(1)  

genEquipInterfacesPWCardIpAddrUdpIpTraffic 1.3.6.1.4.1.2281.10.9.7.1.1.8
IP Address for UDP/IP encapsulated PWs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipInterfacesPWCardIpSubnetUdpIpTraffic 1.3.6.1.4.1.2281.10.9.7.1.1.9
IP Subnet for UDP/IP encapsulated PWs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipInterfacesPWCardClkRecoveryMode 1.3.6.1.4.1.2281.10.9.7.1.1.10
Clock recovery mode for the card.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER adaptive(0), differential(1)  

genEquipInterfacesPWCardDifferentialClkFrequency 1.3.6.1.4.1.2281.10.9.7.1.1.11
Frequency for differential clock (none for adaptive).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), n25MHz(1), n125MHz(2)  

genEquipInterfacesPWCardDifferentialClkSource 1.3.6.1.4.1.2281.10.9.7.1.1.12
Reference clock source for differential clock recovery (none for adaptive).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), sysReference(2), frontPanel(3), n1588(4)  

genEquipInterfacesServicesPWTDMPortsTable 1.3.6.1.4.1.2281.10.9.7.2
This table allows configuration of the 16 internal E1/DS1 ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesServicesPWTDMPortsEntry

genEquipInterfacesServicesPWTDMPortsEntry 1.3.6.1.4.1.2281.10.9.7.2.1
This table allows configuration of the 16 internal E1/DS1 ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesServicesPWTDMPortsEntry  

genEquipInterfacesServicesPWTDMPortsLineType 1.3.6.1.4.1.2281.10.9.7.2.1.1
Line type of this TDM port. E1 types are for E1 systems and DS1 types for DS1 systems.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e1Unframed(0), e1(1), e1Crc(2), e1Mf(3), e1MfCrc(4), ds1Uxnframed(5), ds1Sf(6), ds1Esf(7)  

genEquipInterfacesServicesPWTDMPortsLineCoding 1.3.6.1.4.1.2281.10.9.7.2.1.2
Line coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1. Ami is only for T1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  NoYes  

genEquipInterfacesServicesPWTDMPortsAssigned 1.3.6.1.4.1.2281.10.9.7.2.1.3
Indication whether this port is currently assigned to a TDM trail.
Status: mandatory Access: read-only
OBJECT-TYPE    
  NoYes  

genEquipInterfacesServicesPWTDMPortsChannelization 1.3.6.1.4.1.2281.10.9.7.2.1.4
TIndication whether this TDM port is channelized into DS0s.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesServicesPWTDMPortsTimingMode 1.3.6.1.4.1.2281.10.9.7.2.1.5
Transmission towards TDM timing mode. Loop means transmitting with the received clock from TDM signal. Absolute means transmitting with the clock selected by ClockSourceRef. ClockRecovery means adaptive clock recovery mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER loop(0), absolute(1), clockRecovery(2)  

genEquipInterfacesServicesPWTDMPortsClockSourceRef 1.3.6.1.4.1.2281.10.9.7.2.1.6
Clock source reference for Absolute clock mode. 'none' for loop or clock-recovery timing modes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), sysRefClk(1), frontPanel(2)  

genEquipInterfacesServicesPWTDMPortsClkSrcRefPort 1.3.6.1.4.1.2281.10.9.7.2.1.7
TDM port serving as a clock reference for loop or clock-recovery timing modes
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesServicesPWTDMPortsClkSrcPWId 1.3.6.1.4.1.2281.10.9.7.2.1.8
PW ID (as defined in genEquipServicesPWServicePWId) from which clock will be derived for this port when TimingMode is ClockRecovery.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..256  

genEquipInterfacesServicesPWTDMPortsLoopback 1.3.6.1.4.1.2281.10.9.7.2.1.9
Enable or Disable line loopback on the E1/T1 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER off(1), towardsLine(2), towardsSystem(3)  

genEquipInterfacesServicesPWTDMPortsTimeout 1.3.6.1.4.1.2281.10.9.7.2.1.10
Line loopback timeout, in minutes. 0 means no timer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

genEquipInterfacesServicesPWTDMPortsIdleCode 1.3.6.1.4.1.2281.10.9.7.2.1.11
Value to be transmitted on this TDM port in unused timeslots.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

genEquipInterfacesServicesPWTDMPortsCounter 1.3.6.1.4.1.2281.10.9.7.2.1.12
Loopback time left (in seconds).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesServicesPWTDMPortsLineStatus 1.3.6.1.4.1.2281.10.9.7.2.1.13
Line status of this TDM port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER noAlarm(0), rxLof(1), txLof(2), rxAis(3), txAis(4), ts16RxLomf(5), ts16TxLomf(6), loopbackAlarm(7), otherFailure(8)  

genEquipInterfacesNGPW 1.3.6.1.4.1.2281.10.9.7.3
OBJECT IDENTIFIER    

genEquipInterfacesNGPWCardTable 1.3.6.1.4.1.2281.10.9.7.3.1
This table allows configuration of PW-LIC card level parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesNGPWCardEntry

genEquipInterfacesNGPWCardEntry 1.3.6.1.4.1.2281.10.9.7.3.1.1
This table entry allows configuration of PW-LIC card level parameters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesNGPWCardEntry  

genEquipInterfacesNGPWCardSlotID 1.3.6.1.4.1.2281.10.9.7.3.1.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

genEquipInterfacesNGPWCardExportClkSysRef 1.3.6.1.4.1.2281.10.9.7.3.1.1.2
Configures which clock the PW-LIC exports towards the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWCclockSysRef  

genEquipInterfacesNGPWCardExportClkSysRefCrPort 1.3.6.1.4.1.2281.10.9.7.3.1.1.3
TDM port serving as clock recovery reference towards the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGPWCardIPAddress 1.3.6.1.4.1.2281.10.9.7.3.1.1.4
IP Address for UDP/IP and MPLS encapsulations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipInterfacesNGPWCardIPSubnetMask 1.3.6.1.4.1.2281.10.9.7.3.1.1.5
IP subnet mask for UDP/IP and MPLS encapsulations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

genEquipInterfacesNGPWCardClkRecoveryMode 1.3.6.1.4.1.2281.10.9.7.3.1.1.6
Sets the card either in ACR or differential clock recovery mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER adaptive(0), differential(1)  

genEquipInterfacesNGPWCardDifferentialClkSource 1.3.6.1.4.1.2281.10.9.7.3.1.1.7
Reference clock source for differential clock recovery (none for adaptive).
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWCDiffClockSrc  

genEquipInterfacesNGPWCardClockFreq 1.3.6.1.4.1.2281.10.9.7.3.1.1.8
Frequency for differential clock (none for adaptive).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), fr-25(1), fr-125(2)  

genEquipInterfacesNGPWCardTDMType 1.3.6.1.4.1.2281.10.9.7.3.1.1.9
Type of TDM interfaces (E1, DS1).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER e1(0), ds1(1)  

genEquipInterfacesNGPWCardLoopbackTimeout 1.3.6.1.4.1.2281.10.9.7.3.1.1.10
Timeout for TDM ports loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

genEquipInterfacesNGPWClockInterfaceTable 1.3.6.1.4.1.2281.10.9.7.3.3
This table allows configuration of the front panel clock interface in the PW-LIC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesNGPWClockInterfaceEntry

genEquipInterfacesNGPWClockInterfaceEntry 1.3.6.1.4.1.2281.10.9.7.3.3.1
This table entry allows configuration of the front panel clock interface in the PW-LIC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesNGPWClockInterfaceEntry  

genEquipInterfacesNGPWClockInterfaceSlotID 1.3.6.1.4.1.2281.10.9.7.3.3.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGPWClockInterfaceIfIndex 1.3.6.1.4.1.2281.10.9.7.3.3.1.2
Interface IfIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGPWClockInterfaceAdminRx 1.3.6.1.4.1.2281.10.9.7.3.3.1.3
Clock interface administrative state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipInterfacesNGPWClockInterfaceAdminTx 1.3.6.1.4.1.2281.10.9.7.3.3.1.4
Clock interface administrative state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipInterfacesNGPWClockInterfaceExportClkFrontPannel 1.3.6.1.4.1.2281.10.9.7.3.3.1.5
Configures which signal the PW-LIC exports to the front panel clock interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), sysRef(1), clockRecovery(2)  

genEquipInterfacesNGPWClockInterfaceExportClkFrontPanelCrPort 1.3.6.1.4.1.2281.10.9.7.3.3.1.6
TDM port serving as clock recovery reference for front panel interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..16  

genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalInput 1.3.6.1.4.1.2281.10.9.7.3.3.1.7
Expected input signal type: E1 or differential sine/square 3.3V 2MHz
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWfpClockSignal  

genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalOutput 1.3.6.1.4.1.2281.10.9.7.3.3.1.8
Output signal type: E1 or differential sine/square 3.3V 2MH.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PWfpClockSignal  

genEquipInterfacesNGPWClockInterfaceSSMAdmin 1.3.6.1.4.1.2281.10.9.7.3.3.1.9
Enable/disable SSM sending in this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipInterfacesNGPWClockInterfaceSSMBit 1.3.6.1.4.1.2281.10.9.7.3.3.1.10
Determines which bit in the frame.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 4..8  

genEquipInterfacesNGPWClockInterfaceSSMTxDefault 1.3.6.1.4.1.2281.10.9.7.3.3.1.11
...
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

genEquipInterfacesNGPWClockInterfaceStatusTable 1.3.6.1.4.1.2281.10.9.7.3.4
This table contains information about current state of the clock interface in the PW-LIC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesNGPWClockInterfaceStatusEntry

genEquipInterfacesNGPWClockInterfaceStatusEntry 1.3.6.1.4.1.2281.10.9.7.3.4.1
This table entry contains information about current state of the clock interface in the PW-LIC.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesNGPWClockInterfaceStatusEntry  

genEquipInterfacesNGPWClockInterfaceStatusSlotID 1.3.6.1.4.1.2281.10.9.7.3.4.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

genEquipInterfacesNGPWClockInterfaceStatusIfIndex 1.3.6.1.4.1.2281.10.9.7.3.4.1.2
Interface IfIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGPWClockInterfaceStatusOperationalState 1.3.6.1.4.1.2281.10.9.7.3.4.1.3
Clock interface operational state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipInterfacesNGPWClockInterfaceStatusSSMTx 1.3.6.1.4.1.2281.10.9.7.3.4.1.4
Currently transmitted SSM bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

genEquipInterfacesNGPWClockInterfaceStatusSSMRx 1.3.6.1.4.1.2281.10.9.7.3.4.1.5
Currently received SSM bits.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

genEquipInterfacesNGPWEthInterfaceTable 1.3.6.1.4.1.2281.10.9.7.3.5
This table allows enabling/disabling the PW-LIC internal Ethernet port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesNGPWEthInterfaceEntry

genEquipInterfacesNGPWEthInterfaceEntry 1.3.6.1.4.1.2281.10.9.7.3.5.1
This table allows enabling/disabling the PW-LIC internal Ethernet port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesNGPWEthInterfaceEntry  

genEquipInterfacesNGPWEthInterfaceSlotID 1.3.6.1.4.1.2281.10.9.7.3.5.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 2..12  

genEquipInterfacesNGPWEthInterfaceIfIndex 1.3.6.1.4.1.2281.10.9.7.3.5.1.2
Interface IfIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGPWEthInterfaceStatusTable 1.3.6.1.4.1.2281.10.9.7.3.6
This table contains status and RMON statistics of the internal PW-LIC Ethernet port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesNGPWEthInterfaceStatusEntry

genEquipInterfacesNGPWEthInterfaceStatusEntry 1.3.6.1.4.1.2281.10.9.7.3.6.1
This table enatry contains status and RMON statistics of the internal PW-LIC Ethernet port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesNGPWEthInterfaceStatusEntry  

genEquipInterfacesNGPWEthInterfaceStatusIfIndex 1.3.6.1.4.1.2281.10.9.7.3.6.1.2
Interface IfIndex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGPWEthInterfaceStatusMACAddress 1.3.6.1.4.1.2281.10.9.7.3.6.1.3
MAC Address to be used in Ethernet and UDP/IP PSN packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(6)  

genEquipInterfacesNGPWEthInterfaceStatusClearStats 1.3.6.1.4.1.2281.10.9.7.3.6.1.4
Clears internal Ethernet port RMON counters
Status: mandatory Access: write-only
OBJECT-TYPE    
  NoYes  

genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames64 1.3.6.1.4.1.2281.10.9.7.3.6.1.5
Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 64 bytes in length inclusive
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames127 1.3.6.1.4.1.2281.10.9.7.3.6.1.6
Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 65 to 127 bytes in length inclusive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames255 1.3.6.1.4.1.2281.10.9.7.3.6.1.7
Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 128 to 255 bytes in length inclusive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames511 1.3.6.1.4.1.2281.10.9.7.3.6.1.8
Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 256 to 511 bytes in length inclusive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1023 1.3.6.1.4.1.2281.10.9.7.3.6.1.9
Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 512 to 1023 bytes in length inclusive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1518 1.3.6.1.4.1.2281.10.9.7.3.6.1.10
Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1024 to 1518 bytes in length inclusive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1522 1.3.6.1.4.1.2281.10.9.7.3.6.1.11
Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1519 to 1522 bytes in length inclusive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxBytes 1.3.6.1.4.1.2281.10.9.7.3.6.1.12
Unsigned 64-bit modulo counter of byte count of frames received with 0 to 1518 bytes, including those in bad packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxPackets 1.3.6.1.4.1.2281.10.9.7.3.6.1.13
Unsigned 64-bit modulo counter of number of received packets (including bad packets, all Unicast, Broadcast, and Multicast packets).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxErrFcs 1.3.6.1.4.1.2281.10.9.7.3.6.1.14
Unsigned 64-bit modulo counter of frames received that have a integral 64 to 1518 byte length and contain a Frame Check Sequence error..
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxMulticast 1.3.6.1.4.1.2281.10.9.7.3.6.1.15
Unsigned 64-bit modulo counter of number of multicast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxBroadcast 1.3.6.1.4.1.2281.10.9.7.3.6.1.16
Unsigned 64-bit modulo counter of number of broadcast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxMacControl 1.3.6.1.4.1.2281.10.9.7.3.6.1.17
Unsigned 64-bit modulo counter of MAC Control frames received (PAUSE &Unsupported).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxMacPause 1.3.6.1.4.1.2281.10.9.7.3.6.1.18
Unsigned 64-bit modulo counter of valid PAUSE MAC Control frames received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxMacUnknown 1.3.6.1.4.1.2281.10.9.7.3.6.1.19
Unsigned 64-bit modulo counter of MAC Control Frames received that contain an opcode other than a PAUSE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxErrCode 1.3.6.1.4.1.2281.10.9.7.3.6.1.20
Unsigned 64-bit modulo counter of number of instances where a valid carrier was present and at least one invalid data symbol was detected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxErrFalseCarrier 1.3.6.1.4.1.2281.10.9.7.3.6.1.21
Unsigned 64-bit modulo counter of number of false carriers detected during idle, as defined by a 1 on RX_ER and an '0xE' on RXD.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxUndersize 1.3.6.1.4.1.2281.10.9.7.3.6.1.22
Unsigned 64-bit modulo counter of frames received that are less than 64 bytes in length, contain a valid FCS, and were otherwise well formed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxOversize 1.3.6.1.4.1.2281.10.9.7.3.6.1.23
Unsigned 64-bit modulo counter of frames received that exceeded maximum bytes in length, contain a valid FCS, and were otherwise well formed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxFragments 1.3.6.1.4.1.2281.10.9.7.3.6.1.24
Unsigned 64-bit modulo counter of frames received which are less than 64 bytes in length and contain an invalid FCS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxJabber 1.3.6.1.4.1.2281.10.9.7.3.6.1.25
Unsigned 64-bit modulo counter of frames received which exceed maximum length and contain an invalid FCS, including alignment errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxDropped 1.3.6.1.4.1.2281.10.9.7.3.6.1.26
Unsigned 64-bit modulo counter of frames received that are streamed to the system but are later dropped due to lack of system resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxBytes 1.3.6.1.4.1.2281.10.9.7.3.6.1.27
Unsigned 64-bit modulo counter of number of bytes that were put on the wire including fragments of frames that were involved with collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxPackets 1.3.6.1.4.1.2281.10.9.7.3.6.1.28
Unsigned 64-bit modulo counter of transmitted packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxMulticast 1.3.6.1.4.1.2281.10.9.7.3.6.1.29
Unsigned 64-bit modulo counter of Multicast valid frames transmitted (excluding Broadcast frames).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxBroadcast 1.3.6.1.4.1.2281.10.9.7.3.6.1.30
Unsigned 64-bit modulo counter of Broadcast frames transmitted (excluding Multicast frames).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxMacPause 1.3.6.1.4.1.2281.10.9.7.3.6.1.31
Unsigned 64-bit modulo counter of valid PAUSE MAC Control frames transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxDefer 1.3.6.1.4.1.2281.10.9.7.3.6.1.32
Unsigned 64-bit modulo counter of frames that were deferred upon first transmission attempt. Does not include frames involved in collisions..
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxExcessDefer 1.3.6.1.4.1.2281.10.9.7.3.6.1.33
Unsigned 64-bit modulo counter of number of frames aborted that were deferred for an excessive period of time (3036 byte times).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxSingleCollision 1.3.6.1.4.1.2281.10.9.7.3.6.1.34
Unsigned 64-bit modulo counter of frames transmitted which experienced exactly one collision during transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxMultiCollision 1.3.6.1.4.1.2281.10.9.7.3.6.1.35
Unsigned 64-bit modulo counter of frames transmitted which experienced 2-15 collisions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxLateCollision 1.3.6.1.4.1.2281.10.9.7.3.6.1.36
Unsigned 64-bit modulo counter of frames transmitted that experienced a late collision during a transmission attempt.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxExcessCollision 1.3.6.1.4.1.2281.10.9.7.3.6.1.37
Unsigned 64-bit modulo counter of frames that experienced 16 collisions during transmission and were aborted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxNoCollision 1.3.6.1.4.1.2281.10.9.7.3.6.1.38
Unsigned 64-bit modulo counter of number of frames transmitted that had no collision.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxMacPauseHonored 1.3.6.1.4.1.2281.10.9.7.3.6.1.39
Unsigned 64-bit modulo counter of number of times a valid PAUSE MAC Control frame was transmitted and honored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxDropped 1.3.6.1.4.1.2281.10.9.7.3.6.1.40
Unsigned 64-bit modulo counter of number of times the input PFH is asserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxJabber 1.3.6.1.4.1.2281.10.9.7.3.6.1.41
Unsigned 64-bit modulo counter of oversized transmitted frames with an incorrect FCS value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxErrFcs 1.3.6.1.4.1.2281.10.9.7.3.6.1.42
Unsigned 64-bit modulo counter of valid sized packets transmitted with an incorrec tFCS value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxControl 1.3.6.1.4.1.2281.10.9.7.3.6.1.43
Unsigned 64-bit modulo counter of valid size frames transmitted with a Type Field signifying a Control frame..
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxOversize 1.3.6.1.4.1.2281.10.9.7.3.6.1.44
Unsigned 64-bit modulo counter of oversized transmitted frames with a correct.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxUndersize 1.3.6.1.4.1.2281.10.9.7.3.6.1.45
Unsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with a correctFCS value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxFragments 1.3.6.1.4.1.2281.10.9.7.3.6.1.46
Unsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with an incorrect FCS value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxIwFrames 1.3.6.1.4.1.2281.10.9.7.3.6.1.47
Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames that were received and sent to the L3 Interworking module.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxErrFbpUnderrun 1.3.6.1.4.1.2281.10.9.7.3.6.1.48
Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due free buffer pool (FBP) Overrun.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxErrNonvalidMac 1.3.6.1.4.1.2281.10.9.7.3.6.1.49
Unsigned 64-bit modulo counter of the number of received Ethernet frames whose MAC-DA is not valid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxErrMru 1.3.6.1.4.1.2281.10.9.7.3.6.1.50
Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due the Maximum Receive Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxErrSdu 1.3.6.1.4.1.2281.10.9.7.3.6.1.51
Unsigned 64-bit modulo counter of the number of Ethernet frames which were closed due the maximum frame size has been exceeded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusTxErrUnderrun 1.3.6.1.4.1.2281.10.9.7.3.6.1.52
Unsigned 64-bit modulo counter of number of times Ethernet transmitter underun occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusRxErrOverrun 1.3.6.1.4.1.2281.10.9.7.3.6.1.53
Unsigned 64-bit modulo counter of number of received Ethernet frames which were closed or discarded due to a receive buffer overrun event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter64  

genEquipInterfacesNGPWEthInterfaceStatusSlotID 1.3.6.1.4.1.2281.10.9.7.3.6.1.54
Slot where PW-LIC is inserted
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesNGPWCardStatusTable 1.3.6.1.4.1.2281.10.9.7.3.7
This table contains information about PW-LIC card level status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesNGPWCardStatusEntry

genEquipInterfacesNGPWCardStatusEntry 1.3.6.1.4.1.2281.10.9.7.3.7.1
This table contains information about PW-LIC card level status.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesNGPWCardStatusEntry  

genEquipInterfacesNGPWCardStatusSlotID 1.3.6.1.4.1.2281.10.9.7.3.7.1.1
Slot where PW-LIC is inserted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..12  

genEquipInterfacesNGPWCardStatusSWVersion 1.3.6.1.4.1.2281.10.9.7.3.7.1.2
Bundle ID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

genEquipInterfacesCet 1.3.6.1.4.1.2281.10.9.8
OBJECT IDENTIFIER    

genEquipInterfacesCetGeneral 1.3.6.1.4.1.2281.10.9.8.1
OBJECT IDENTIFIER    

genEquipInterfacesCetMru 1.3.6.1.4.1.2281.10.9.8.1.1
Maximum Frame Size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 64..9612  

genEquipInterfacesCetPhyConfigTable 1.3.6.1.4.1.2281.10.9.8.2
Ethernet physical port configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetPhyConfigEntry

genEquipInterfacesCetPhyConfigEntry 1.3.6.1.4.1.2281.10.9.8.2.1
Ethernet physical port configuration table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetPhyConfigEntry  

genEquipInterfacesCetPhyConfigIfIndex 1.3.6.1.4.1.2281.10.9.8.2.1.1
Ethernet physical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetPhyConfigDescription 1.3.6.1.4.1.2281.10.9.8.2.1.2
Setting Ethernet physical port user description.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipInterfacesCetPhyConfigMediaType 1.3.6.1.4.1.2281.10.9.8.2.1.3
Setting Ethernet physical port media type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MediaType  

genEquipInterfacesCetPhyConfigAdmin 1.3.6.1.4.1.2281.10.9.8.2.1.4
Setting Ethernet physical port administration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetPhyConfigAutoNegotiation 1.3.6.1.4.1.2281.10.9.8.2.1.5
Setting Ethernet physical port auto negotiation state.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AutoNegMode  

genEquipInterfacesCetPhyConfigSpeed 1.3.6.1.4.1.2281.10.9.8.2.1.6
Setting Ethernet physical maximum port speed Affects Auto Neg Capability Advertised Bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  SpeedDefs  

genEquipInterfacesCetPhyConfigDuplex 1.3.6.1.4.1.2281.10.9.8.2.1.7
Setting Ethernet physical port duplex Affects Auto Neg Capability Advertised Bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HalfFull  

genEquipInterfacesCetPhyConfigMasterSlave 1.3.6.1.4.1.2281.10.9.8.2.1.8
Setting Ethernet physical port master slave for 1000BaseT Affects Auto Neg Capability Advertised Bits.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MasterSalveSetMode  

genEquipInterfacesCetPhyConfigIfg 1.3.6.1.4.1.2281.10.9.8.2.1.10
Inter Frame GAP value in bytes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 6..15  

genEquipInterfacesCetPhyConfigPreamble 1.3.6.1.4.1.2281.10.9.8.2.1.11
port preamble value in bytes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 6..15  

genEquipInterfacesCetPhyConfigMacAddress 1.3.6.1.4.1.2281.10.9.8.2.1.12
Ethernet physical port mac-address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

genEquipInterfacesCetPhyConfigType 1.3.6.1.4.1.2281.10.9.8.2.1.13
Setting Ethernet physical port type.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PortType  

genEquipInterfacesCetPhyConfigPortPmAdmin 1.3.6.1.4.1.2281.10.9.8.2.1.14
Enable/Disable PMs on port level.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetPhyConfigPortPmRxBytesThreshold 1.3.6.1.4.1.2281.10.9.8.2.1.15
Threshold of received bytes PM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetPhyConfigPortPmTxBytesThreshold 1.3.6.1.4.1.2281.10.9.8.2.1.16
Threshold of transmitted bytes PM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetPhyStatusTable 1.3.6.1.4.1.2281.10.9.8.3
Ethernet physical port configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetPhyStatusEntry

genEquipInterfacesCetPhyStatusEntry 1.3.6.1.4.1.2281.10.9.8.3.1
This table allows configuration of the 16 internal E1/DS1 ports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetPhyStatusEntry  

genEquipInterfacesCetPhyStatusIfIndex 1.3.6.1.4.1.2281.10.9.8.3.1.1
Ethernet physical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetPhyStatusMediaType 1.3.6.1.4.1.2281.10.9.8.3.1.2
Setting Ethernet physical port media type.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MediaType  

genEquipInterfacesCetPhyStatusOperationalStatus 1.3.6.1.4.1.2281.10.9.8.3.1.3
Ethernet physical port operational-status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipInterfacesCetPhystatusAutoNegotiation 1.3.6.1.4.1.2281.10.9.8.3.1.4
Ethernet physical port auto negotiation status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AutoNegMode  

genEquipInterfacesCetPhyStatusSpeed 1.3.6.1.4.1.2281.10.9.8.3.1.5
Actual Ethernet physical port speed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  SpeedDefs  

genEquipInterfacesCetPhyStatusDuplex 1.3.6.1.4.1.2281.10.9.8.3.1.6
Actual Ethernet physical port duplex.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HalfFull  

genEquipInterfacesCetPhyStatusMasterSlave 1.3.6.1.4.1.2281.10.9.8.3.1.7
Actual Ethernet physical port master slave for 1000BaseT.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MasterSalveSetMode  

genEquipInterfacesCetLogicConfigTable 1.3.6.1.4.1.2281.10.9.8.4
The table holds the ingress logical port configuration (it is the same point of view for single interface or group of ports) .
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetLogicConfigEntry

genEquipInterfacesCetLogicConfigEntry 1.3.6.1.4.1.2281.10.9.8.4.1
The table entry holds the ingress logical port configuration (it is the same point of view for single interface or group of ports).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetLogicConfigEntry  

genEquipInterfacesCetLogicConfigIfIndex 1.3.6.1.4.1.2281.10.9.8.4.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLogicConfigTrafficFlow 1.3.6.1.4.1.2281.10.9.8.4.1.2
Control the the traffic via logical port which is connected to physical interface (in case of group it control the all interfaces of the group).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetLogicConfigEdgePort 1.3.6.1.4.1.2281.10.9.8.4.1.3
Port Edge Mode (edge / non-edge).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EdgePortType  

genEquipInterfacesCetLogicConfigIngressTcamClassification 1.3.6.1.4.1.2281.10.9.8.4.1.4
ingress-tcam-classification.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLogicConfigDefaultVlanTag 1.3.6.1.4.1.2281.10.9.8.4.1.5
Default Network Vlan ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLogicConfigInLineCompensation 1.3.6.1.4.1.2281.10.9.8.4.1.6
Ethernet Layer 1 Ingress Byte Compensation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

genEquipInterfacesCetLogicConfigOutLineCompensation 1.3.6.1.4.1.2281.10.9.8.4.1.7
Ethernet Layer 1 Egress Byte Compensation from the specific logical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..26  

genEquipInterfacesCetLogicConfigPclId 1.3.6.1.4.1.2281.10.9.8.4.1.8
....
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLogicConfigDefCos 1.3.6.1.4.1.2281.10.9.8.4.1.9
Port Default CoS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

genEquipInterfacesCetLogicConfigVlanUpToCosTrustMode 1.3.6.1.4.1.2281.10.9.8.4.1.10
Trust VLAN UP bits for classification from the specific logical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrustMode  

genEquipInterfacesCetLogicConfigDscpToCosTrustMode 1.3.6.1.4.1.2281.10.9.8.4.1.11
Trust DSCP for classification from the specific logical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrustMode  

genEquipInterfacesCetLogicConfigMplsExpToCosTrustMode 1.3.6.1.4.1.2281.10.9.8.4.1.12
Trust MPLS EXP bits for classification from the specific logical port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TrustMode  

genEquipInterfacesCetLogicConfigMacAddress 1.3.6.1.4.1.2281.10.9.8.4.1.13
Ethernet logical port mac-address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

genEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdmin 1.3.6.1.4.1.2281.10.9.8.4.1.14
Swap MAC address for Ethernet port loopback.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetLogicConfigLoopbackAdmin 1.3.6.1.4.1.2281.10.9.8.4.1.15
Ethernet loopback admin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetLogicConfigLoopbackDuration 1.3.6.1.4.1.2281.10.9.8.4.1.16
Ethernet loopback duration. Allowed values 1 to 9000 seconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLogicStatusTable 1.3.6.1.4.1.2281.10.9.8.5
The table holds the ingress logical port status (it is the same point of view for single interface or group of ports).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetLogicStatusEntry

genEquipInterfacesCetLogicStatusEntry 1.3.6.1.4.1.2281.10.9.8.5.1
The table entry holds the ingress logical port status (it is the same point of view for single interface or group of ports).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetLogicStatusEntry  

genEquipInterfacesCetLogicStatusIfIndex 1.3.6.1.4.1.2281.10.9.8.5.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLogicStatusOperationalStatus 1.3.6.1.4.1.2281.10.9.8.5.1.2
Ethernet logical port operational-status (Up or Down).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipInterfacesCetBcastPolicerAssociationTable 1.3.6.1.4.1.2281.10.9.8.6
Ethernet Port Broadcast configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetBcastPolicerAssociationEntry

genEquipInterfacesCetBcastPolicerAssociationEntry 1.3.6.1.4.1.2281.10.9.8.6.1
Ethernet Port Broadcast configuration table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetBcastPolicerAssociationEntry  

genEquipInterfacesCetBcastPolicerAssociationIfIndex 1.3.6.1.4.1.2281.10.9.8.6.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetBcastPolicerAssociationAssociatedProfileId 1.3.6.1.4.1.2281.10.9.8.6.1.2
Policer Profile.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetBcastPolicerAssociationAssociationAdmin 1.3.6.1.4.1.2281.10.9.8.6.1.3
Broadcast Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetBcastPolicerAssociationAssociationRowStatus 1.3.6.1.4.1.2281.10.9.8.6.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipInterfacesCetEtype1PolicerAssociationTable 1.3.6.1.4.1.2281.10.9.8.7
Ethernet Policing of user configuration ethertype type 1 (at port level) table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetEtype1PolicerAssociationEntry

genEquipInterfacesCetEtype1PolicerAssociationEntry 1.3.6.1.4.1.2281.10.9.8.7.1
Ethernet Policing of user configuration ethertype type 1 (at port level) table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetEtype1PolicerAssociationEntry  

genEquipInterfacesCetEtype1PolicerAssociationIfIndex 1.3.6.1.4.1.2281.10.9.8.7.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetEtype1PolicerAssociationProfileId 1.3.6.1.4.1.2281.10.9.8.7.1.2
Ingress Policer Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipInterfacesCetEtype1PolicerAssociationEthertype 1.3.6.1.4.1.2281.10.9.8.7.1.3
Ethernet Ethertype 1 user configuration value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

genEquipInterfacesCetEtype1PolicerAssociationAdmin 1.3.6.1.4.1.2281.10.9.8.7.1.4
Ingress Ethertype 1 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetEtype1PolicerAssociationRowStatus 1.3.6.1.4.1.2281.10.9.8.7.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipInterfacesCetEtype2PolicerAssociationTable 1.3.6.1.4.1.2281.10.9.8.8
Ethernet Policing of user configuration ethertype type 2 (at port level) table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetEtype2PolicerAssociationEntry

genEquipInterfacesCetEtype2PolicerAssociationEntry 1.3.6.1.4.1.2281.10.9.8.8.1
Ethernet Policing of user configuration ethertype type 2 (at port level) table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetEtype2PolicerAssociationEntry  

genEquipInterfacesCetEtype2PolicerAssociationIfIndex 1.3.6.1.4.1.2281.10.9.8.8.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetEtype2PolicerAssociationAssociatedProfileId 1.3.6.1.4.1.2281.10.9.8.8.1.2
Ingress Policer Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipInterfacesCetEtype2PolicerAssociationEthertype 1.3.6.1.4.1.2281.10.9.8.8.1.3
Ethernet Ethertype 2 user configuration value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

genEquipInterfacesCetEtype2PolicerAssociationAdmin 1.3.6.1.4.1.2281.10.9.8.8.1.4
Ingress Ethertype 2 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetEtype2PolicerAssociationRowStatus 1.3.6.1.4.1.2281.10.9.8.8.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipInterfacesCetEtype3PolicerAssociationTable 1.3.6.1.4.1.2281.10.9.8.9
Ethernet Policing of user configuration ethertype type 3 (at port level) table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetEtype3PolicerAssociationEntry

genEquipInterfacesCetEtype3PolicerAssociationEntry 1.3.6.1.4.1.2281.10.9.8.9.1
Ethernet Policing of user configuration ethertype type 3 (at port level) table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetEtype3PolicerAssociationEntry  

genEquipInterfacesCetEtype3PolicerAssociationIfIndex 1.3.6.1.4.1.2281.10.9.8.9.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetEtype3PolicerAssociationAssociatedProfileId 1.3.6.1.4.1.2281.10.9.8.9.1.2
Ingress Policer Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipInterfacesCetEtype3PolicerAssociationEthertype 1.3.6.1.4.1.2281.10.9.8.9.1.3
Ethernet Ethertype 3 user configuration value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

genEquipInterfacesCetEtype3PolicerAssociationAdmin 1.3.6.1.4.1.2281.10.9.8.9.1.4
Ingress Ethertype 3 Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetEtype3PolicerAssociationRowStatus 1.3.6.1.4.1.2281.10.9.8.9.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipInterfacesCetMcastPolicerAssociationTable 1.3.6.1.4.1.2281.10.9.8.10
Ethernet Port Multicast configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetMcastPolicerAssociationEntry

genEquipInterfacesCetMcastPolicerAssociationEntry 1.3.6.1.4.1.2281.10.9.8.10.1
Ethernet Port Multicast configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetMcastPolicerAssociationEntry  

genEquipInterfacesCetMcastPolicerAssociationIfIndex 1.3.6.1.4.1.2281.10.9.8.10.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetMcastPolicerAssociationAssociatedProfileId 1.3.6.1.4.1.2281.10.9.8.10.1.2
Ingress Policer Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipInterfacesCetMcastPolicerAssociationAdmin 1.3.6.1.4.1.2281.10.9.8.10.1.3
Ingress Multicast Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetMcastPolicerAssociationAssociationRowStatus 1.3.6.1.4.1.2281.10.9.8.10.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipInterfacesCetUcastPolicerAssociationTable 1.3.6.1.4.1.2281.10.9.8.11
Ethernet Port Multicast configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetUcastPolicerAssociationEntry

genEquipInterfacesCetUcastPolicerAssociationEntry 1.3.6.1.4.1.2281.10.9.8.11.1
Ethernet Port Multicast configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetUcastPolicerAssociationEntry  

genEquipInterfacesCetUcastPolicerAssociationIfIndex 1.3.6.1.4.1.2281.10.9.8.11.1.1
Ethernet Logical port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetUcastPolicerAssociationAssociatedProfileId 1.3.6.1.4.1.2281.10.9.8.11.1.2
Ingress Policer Profile ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..256  

genEquipInterfacesCetUcastPolicerAssociationAdmin 1.3.6.1.4.1.2281.10.9.8.11.1.3
Ingress Unicast Policer Admin (enable / disable).
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisable  

genEquipInterfacesCetUcastPolicerAssociationRowStatus 1.3.6.1.4.1.2281.10.9.8.11.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipInterfacesCetLagTable 1.3.6.1.4.1.2281.10.9.8.12
This table holds the members of a Link Aggregation Group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCetLagEntry

genEquipInterfacesCetLagEntry 1.3.6.1.4.1.2281.10.9.8.12.1
This table holds the members of a Link Aggregation Group entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCetLagEntry  

genEquipInterfacesCetLagIfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.1
Link aggregation group IF index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember1IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.2
Link aggregation member 1 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember2IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.3
Link aggregation member 2 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember3IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.4
Link aggregation member 3 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember4IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.5
Link aggregation member 4 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember5IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.6
Link aggregation member 5 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember6IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.7
Link aggregation member 6 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember7IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.8
Link aggregation member 7 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember8IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.9
Link aggregation member 8 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember9IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.10
Link aggregation member 9 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember10IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.11
Link aggregation member 9 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember11IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.12
Link aggregation member 11 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember12IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.13
Link aggregation member 12 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember13IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.14
Link aggregation member 13 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember14IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.15
Link aggregation member 14 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember15IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.16
Link aggregation member 15 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagMember16IfIndex 1.3.6.1.4.1.2281.10.9.8.12.1.17
Link aggregation member 16 IF index.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCetLagRowStatus 1.3.6.1.4.1.2281.10.9.8.12.1.30
Table Mib Row Status.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

genEquipServicesCetConfigServiceToInstanceTable 1.3.6.1.4.1.2281.10.9.8.13
This table is used for mapping xSTP instance number per service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipServicesCetConfigServiceToInstanceEntry

genEquipServicesCetConfigServiceToInstanceEntry 1.3.6.1.4.1.2281.10.9.8.13.1
This table entry is used for mapping xSTP instance number per service.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipServicesCetConfigServiceToInstanceEntry  

genEquipServicesCetConfigServiceToInstanceServiceIndex 1.3.6.1.4.1.2281.10.9.8.13.1.1
Service ID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipServicesCetConfigServiceToInstanceInstanceIndex 1.3.6.1.4.1.2281.10.9.8.13.1.2
xSTP Instance ID for the specific Service.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesIfManager 1.3.6.1.4.1.2281.10.9.9
OBJECT IDENTIFIER    

genEquipInterfacesIfManagerTable 1.3.6.1.4.1.2281.10.9.9.1
This table contains a list of configuration information about the user managed interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesIfManagerEntry

genEquipInterfacesIfManagerEntry 1.3.6.1.4.1.2281.10.9.9.1.1
This table entry contains a list of configuration information about the user managed interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesIfManagerEntry  

genEquipInterfacesIfManagerifCascading 1.3.6.1.4.1.2281.10.9.9.1.1.1
The cascading state of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IfMgrTrueFalse  

genEquipInterfacesIfManagerifSecondaryOperStatus 1.3.6.1.4.1.2281.10.9.9.1.1.2
An additional information about the current operational state of the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCascading 1.3.6.1.4.1.2281.10.9.10
OBJECT IDENTIFIER    

genEquipInterfacesCascadingConfigurationTable 1.3.6.1.4.1.2281.10.9.10.1
Cascading Port Configuration Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesCascadingConfigurationEntry

genEquipInterfacesCascadingConfigurationEntry 1.3.6.1.4.1.2281.10.9.10.1.1
Cascading Port Configuration Table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesCascadingConfigurationEntry  

genEquipInterfacesCascadingConfigurationIfindex 1.3.6.1.4.1.2281.10.9.10.1.1.1
Cascading port if-index table key.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesCascadingConfigurationCascading 1.3.6.1.4.1.2281.10.9.10.1.1.2
Indicates if the port is cascading or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MibTrueFalse  

genEquipInterfacesStm1Rst 1.3.6.1.4.1.2281.10.9.11
OBJECT IDENTIFIER    

genEquipInterfacesStm1RstConfigTable 1.3.6.1.4.1.2281.10.9.11.1
STM-1/OC-3 configuration table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesStm1RstConfigEntry

genEquipInterfacesStm1RstConfigEntry 1.3.6.1.4.1.2281.10.9.11.1.1
STM-1/OC-3 configuration table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesStm1RstConfigEntry  

genEquipInterfacesStm1RstConfigIfindex 1.3.6.1.4.1.2281.10.9.11.1.1.1
The interface index of the STM-1/OC-3 interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstConfigPort 1.3.6.1.4.1.2281.10.9.11.1.1.2
The port of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstConfigAdmin 1.3.6.1.4.1.2281.10.9.11.1.1.3
The Admin Sate of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  EnableDisableSMI2  

genEquipInterfacesStm1RstConfigMute 1.3.6.1.4.1.2281.10.9.11.1.1.4
The SFP Mute config of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER unmute(0), mute(1)  

genEquipInterfacesStm1RstStatusTable 1.3.6.1.4.1.2281.10.9.11.2
STM-1/OC-3 status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesStm1RstStatusEntry

genEquipInterfacesStm1RstStatusEntry 1.3.6.1.4.1.2281.10.9.11.2.1
STM-1/OC-3 status table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesStm1RstStatusEntry  

genEquipInterfacesStm1RstStatusIfindex 1.3.6.1.4.1.2281.10.9.11.2.1.1
The interface index of the STM-1/OC-3 interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstStatusLoopbackTimer 1.3.6.1.4.1.2281.10.9.11.2.1.2
The port of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstStatusLoopbackType 1.3.6.1.4.1.2281.10.9.11.2.1.3
The loopback type of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RSTLoopbackType  

genEquipInterfacesStm1RstStatusOperstatus 1.3.6.1.4.1.2281.10.9.11.2.1.4
The operational status of the STM-1/OC-3 interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DownUp  

genEquipInterfacesStm1RstPrbsTable 1.3.6.1.4.1.2281.10.9.11.3
STM-1/OC-3 status table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GenEquipInterfacesStm1RstPrbsEntry

genEquipInterfacesStm1RstPrbsEntry 1.3.6.1.4.1.2281.10.9.11.3.1
STM-1/OC-3 status table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  GenEquipInterfacesStm1RstPrbsEntry  

genEquipInterfacesStm1RstPrbsCheckLineClear 1.3.6.1.4.1.2281.10.9.11.3.1.1
The PRBS Checker Line Direction Reset counter of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsCheckLine 1.3.6.1.4.1.2281.10.9.11.3.1.2
The PRBS Checker Line Direction of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsCheckLineInv 1.3.6.1.4.1.2281.10.9.11.3.1.3
The PRBS Checker Line Direction of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsCheckLineStatus 1.3.6.1.4.1.2281.10.9.11.3.1.4
The PRBS Checker Line Direction Status of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipInterfacesStm1RstPrbsCheckLineTotErr 1.3.6.1.4.1.2281.10.9.11.3.1.5
The PRBS Checker Line Direction Total Error counter of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsCheckRadioClear 1.3.6.1.4.1.2281.10.9.11.3.1.6
The PRBS Checker Radio Direction Reset counter of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsCheckRadio 1.3.6.1.4.1.2281.10.9.11.3.1.7
The PRBS Checker Radio Direction of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsCheckRadioInv 1.3.6.1.4.1.2281.10.9.11.3.1.8
The PRBS Checker Radio Direction of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsCheckRadioStatus 1.3.6.1.4.1.2281.10.9.11.3.1.9
The PRBS Checker Radio Direction Status of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

genEquipInterfacesStm1RstPrbsCheckRadioTotErr 1.3.6.1.4.1.2281.10.9.11.3.1.10
The PRBS Checker Radio Direction Total Error counter of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsGenLine 1.3.6.1.4.1.2281.10.9.11.3.1.11
The PRBS Generator Line Direction of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsGenLineErrIns 1.3.6.1.4.1.2281.10.9.11.3.1.12
The PRBS Generator Line Direction Error Insert of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsGenLineInv 1.3.6.1.4.1.2281.10.9.11.3.1.13
The PRBS Generator Line Direction of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsGenRadio 1.3.6.1.4.1.2281.10.9.11.3.1.14
The PRBS Generator Radio Direction of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsGenRadioErrIns 1.3.6.1.4.1.2281.10.9.11.3.1.15
The PRBS Generator Radio Direction Error Insert of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

genEquipInterfacesStm1RstPrbsGenRadioInv 1.3.6.1.4.1.2281.10.9.11.3.1.16
The PRBS Generator Radio Direction of the STM-1/OC-3 interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

alarmTrap 1001
Alarm network trap
TRAP-TYPE    

eventTrap 1002
Event network trap
TRAP-TYPE    

heartbeatTrap 1003
The heartbeat trap, sent once per heartbeat period
TRAP-TYPE    

eventTrapSTP 1004
STP trap. (1) The description field shows show the descriptions of the event STP event - on port: , root id: , Bridge role: , Role: , State: In addition to the general trap event var-binds, this trap also adds the STP parameters.
TRAP-TYPE    

genTraps 1.3.6.1.4.1.2281.11
OBJECT IDENTIFIER    

generalV3Trap 1.3.6.1.4.1.2281.11.1
General network V3 trap
Status: current Access: read-write
NOTIFICATION-TYPE    

eventV3Trap 1.3.6.1.4.1.2281.11.2
Event network V3 trap
Status: current Access: read-write
NOTIFICATION-TYPE    

heartbeatV3Trap 1.3.6.1.4.1.2281.11.3
Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period
Status: current Access: read-write
NOTIFICATION-TYPE    

eventv3TrapSTP 1.3.6.1.4.1.2281.11.4
STP trap. (1) The description field shows show the descriptions of the event STP event - on port: , root id: , Bridge role: , Role: , State: , In addition to the general trap event var-binds, this trap also adds the STP parameters.
Status: current Access: read-write
NOTIFICATION-TYPE    

alarmTrap 2000
NG Alarm network trap
TRAP-TYPE    

heartbeatTrap 2001
NG heartbeat trap, sent once per heartbeat period
TRAP-TYPE    

generalNGV3Trap 1.3.6.1.4.1.2281.11.2000
NG General network V3 trap
Status: current Access: read-write
NOTIFICATION-TYPE    

heartbeatNGV3Trap 1.3.6.1.4.1.2281.11.2001
NG Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period
Status: current Access: read-write
NOTIFICATION-TYPE