NETSCREEN-VR-BGP4-MIB

File: NETSCREEN-VR-BGP4-MIB.mib (36984 bytes)

Imported modules

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
IpAddress	Integer32	Counter32
Gauge32	netscreenTrapDesc	netscreenTrapType
netscreenVR

Defined Types

NsVrBgpInfoEntry
SEQUENCE
	nsVrBgpInfoVersion	OCTET STRING
	nsVrBgpInfoLocalAs	INTEGER
	nsVrBgpInfoIdentifier	IpAddress
	nsVrBgpInfoVRID	INTEGER

NsVrBgpPeerEntry
SEQUENCE
	nsVrBgpPeerIdentifier	IpAddress
	nsVrBgpPeerState	INTEGER
	nsVrBgpPeerAdminStatus	INTEGER
	nsVrBgpPeerNegotiatedVersion	Integer32
	nsVrBgpPeerLocalAddr	IpAddress
	nsVrBgpPeerLocalPort	INTEGER
	nsVrBgpPeerRemoteAddr	IpAddress
	nsVrBgpPeerRemotePort	INTEGER
	nsVrBgpPeerRemoteAs	INTEGER
	nsVrBgpPeerInUpdates	Counter32
	nsVrBgpPeerOutUpdates	Counter32
	nsVrBgpPeerInTotalMessages	Counter32
	nsVrBgpPeerOutTotalMessages	Counter32
	nsVrBgpPeerLastError	OCTET STRING
	nsVrBgpPeerFsmEstablishedTransitions	Counter32
	nsVrBgpPeerFsmEstablishedTime	Gauge32
	nsVrBgpPeerConnectRetryInterval	INTEGER
	nsVrBgpPeerHoldTime	INTEGER
	nsVrBgpPeerKeepAlive	INTEGER
	nsVrBgpPeerHoldTimeConfigured	INTEGER
	nsVrBgpPeerKeepAliveConfigured	INTEGER
	nsVrBgpPeerMinASOriginationInterval	INTEGER
	nsVrBgpPeerMinRouteAdvertisementInterval	INTEGER
	nsVrBgpPeerInUpdateElapsedTime	Gauge32
	nsVrBgpPeerVRID	INTEGER

NsVrBgp4PathAttrEntry
SEQUENCE
	nsVrBgp4PathAttrPeer	IpAddress
	nsVrBgp4PathAttrIpAddrPrefixLen	INTEGER
	nsVrBgp4PathAttrIpAddrPrefix	IpAddress
	nsVrBgp4PathAttrOrigin	INTEGER
	nsVrBgp4PathAttrASPathSegment	OCTET STRING
	nsVrBgp4PathAttrNextHop	IpAddress
	nsVrBgp4PathAttrMultiExitDisc	INTEGER
	nsVrBgp4PathAttrLocalPref	INTEGER
	nsVrBgp4PathAttrAtomicAggregate	INTEGER
	nsVrBgp4PathAttrAggregatorAS	INTEGER
	nsVrBgp4PathAttrAggregatorAddr	IpAddress
	nsVrBgp4PathAttrCalcLocalPref	INTEGER
	nsVrBgp4PathAttrBest	INTEGER
	nsVrBgp4PathAttrUnknown	OCTET STRING
	nsVrBgp4PathAttrVRID	INTEGER

Defined Values

nsVrBgp		1.3.6.1.4.1.3224.18.6
The MIB module for NS-BGP-4.
MODULE-IDENTITY

nsVrBgpInfoTable		1.3.6.1.4.1.3224.18.6.1
BGP info table. This table contains, one entry per VR, information about the BGP's Version, LocalAs and Identifier.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NsVrBgpInfoEntry

nsVrBgpInfoEntry		1.3.6.1.4.1.3224.18.6.1.1
Entry containing information about the BGP's Version, LocalAs and Identifier
Status: current	Access: not-accessible
OBJECT-TYPE
	NsVrBgpInfoEntry

nsVrBgpInfoVersion		1.3.6.1.4.1.3224.18.6.1.1.1
Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this object. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1..255)

nsVrBgpInfoLocalAs		1.3.6.1.4.1.3224.18.6.1.1.2
The local autonomous system number.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

nsVrBgpInfoIdentifier		1.3.6.1.4.1.3224.18.6.1.1.3
The BGP Identifier of local system.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

nsVrBgpInfoVRID		1.3.6.1.4.1.3224.18.6.1.1.4
Virtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048]
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

nsVrBgpPeerTable		1.3.6.1.4.1.3224.18.6.3
BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NsVrBgpPeerEntry

nsVrBgpPeerEntry		1.3.6.1.4.1.3224.18.6.3.1
Entry containing information about the connection with a BGP peer.
Status: current	Access: not-accessible
OBJECT-TYPE
	NsVrBgpPeerEntry

nsVrBgpPeerIdentifier		1.3.6.1.4.1.3224.18.6.3.1.1
The BGP Identifier of this entry's BGP peer.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

nsVrBgpPeerState		1.3.6.1.4.1.3224.18.6.3.1.2
The BGP peer connection state.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)

nsVrBgpPeerAdminStatus		1.3.6.1.4.1.3224.18.6.3.1.3
The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	stop(1), start(2)

nsVrBgpPeerNegotiatedVersion		1.3.6.1.4.1.3224.18.6.3.1.4
The negotiated version of BGP running between the two peers.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

nsVrBgpPeerLocalAddr		1.3.6.1.4.1.3224.18.6.3.1.5
The local IP address of this entry's BGP connection.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

nsVrBgpPeerLocalPort		1.3.6.1.4.1.3224.18.6.3.1.6
The local port for the TCP connection between the BGP peers.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

nsVrBgpPeerRemoteAddr		1.3.6.1.4.1.3224.18.6.3.1.7
The remote IP address of this entry's BGP peer.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

nsVrBgpPeerRemotePort		1.3.6.1.4.1.3224.18.6.3.1.8
The remote port for the TCP connection between the BGP peers. Note that the objects nsVrBgpPeerLocalAddr, nsVrBgpPeerLocalPort, nsVrBgpPeerRemoteAddr and nsVrBgpPeerRemotePort provide the appropriate reference to the standard MIB TCP connection table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

nsVrBgpPeerRemoteAs		1.3.6.1.4.1.3224.18.6.3.1.9
The remote autonomous system number.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

nsVrBgpPeerInUpdates		1.3.6.1.4.1.3224.18.6.3.1.10
The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

nsVrBgpPeerOutUpdates		1.3.6.1.4.1.3224.18.6.3.1.11
The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

nsVrBgpPeerInTotalMessages		1.3.6.1.4.1.3224.18.6.3.1.12
The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

nsVrBgpPeerOutTotalMessages		1.3.6.1.4.1.3224.18.6.3.1.13
The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

nsVrBgpPeerLastError		1.3.6.1.4.1.3224.18.6.3.1.14
The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

nsVrBgpPeerFsmEstablishedTransitions		1.3.6.1.4.1.3224.18.6.3.1.15
The total number of times the BGP FSM transitioned into the established state.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

nsVrBgpPeerFsmEstablishedTime		1.3.6.1.4.1.3224.18.6.3.1.16
This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

nsVrBgpPeerConnectRetryInterval		1.3.6.1.4.1.3224.18.6.3.1.17
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

nsVrBgpPeerHoldTime		1.3.6.1.4.1.3224.18.6.3.1.18
Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in nsVrBgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the Hold Timer has not been established with the peer, or, the value of nsVrBgpPeerHoldTimeConfigured is zero (0).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 3..65535

nsVrBgpPeerKeepAlive		1.3.6.1.4.1.3224.18.6.3.1.19
Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with nsVrBgpPeerHoldTime, it has the same proportion as what nsVrBgpPeerKeepAliveConfigured has when compared with nsVrBgpPeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of nsVrBgpPeerKeepAliveConfigured is zero (0).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 1..21845

nsVrBgpPeerHoldTimeConfigured		1.3.6.1.4.1.3224.18.6.3.1.20
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (nsVrBgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 3..65535

nsVrBgpPeerKeepAliveConfigured		1.3.6.1.4.1.3224.18.6.3.1.21
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in nsVrBgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by nsVrBgpPeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of nsVrBgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0 \| 1..21845

nsVrBgpPeerMinASOriginationInterval		1.3.6.1.4.1.3224.18.6.3.1.22
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

nsVrBgpPeerMinRouteAdvertisementInterval		1.3.6.1.4.1.3224.18.6.3.1.23
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

nsVrBgpPeerInUpdateElapsedTime		1.3.6.1.4.1.3224.18.6.3.1.24
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time nsVrBgpPeerInUpdates is incremented, the value of this object is set to zero (0).
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

nsVrBgpPeerVRID		1.3.6.1.4.1.3224.18.6.3.1.25
Virtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048]
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

nsVrBgp4PathAttrTable		1.3.6.1.4.1.3224.18.6.6
The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NsVrBgp4PathAttrEntry

nsVrBgp4PathAttrEntry		1.3.6.1.4.1.3224.18.6.6.1
Information about a path to a network.
Status: current	Access: not-accessible
OBJECT-TYPE
	NsVrBgp4PathAttrEntry

nsVrBgp4PathAttrPeer		1.3.6.1.4.1.3224.18.6.6.1.1
The IP address of the peer where the path information was learned.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

nsVrBgp4PathAttrIpAddrPrefixLen		1.3.6.1.4.1.3224.18.6.6.1.2
Length in bits of the IP address prefix in the Network Layer Reachability Information field.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..32

nsVrBgp4PathAttrIpAddrPrefix		1.3.6.1.4.1.3224.18.6.6.1.3
An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by nsVrBgp4PathAttrIpAddrPrefixLen. Any bits beyond the length specified by nsVrBgp4PathAttrIpAddrPrefixLen are zeroed.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

nsVrBgp4PathAttrOrigin		1.3.6.1.4.1.3224.18.6.6.1.4
The ultimate origin of the path information.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	igp(1), egp(2), incomplete(3)

nsVrBgp4PathAttrASPathSegment		1.3.6.1.4.1.3224.18.6.6.1.5
The sequence of AS path segments. Each AS path segment is represented by a triple . The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_SEQUENCE: ordered set of ASs a route in the UPDATE message has traversed. The length is a 1-octet field containing the number of ASs in the value field. The value field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2..255)

nsVrBgp4PathAttrNextHop		1.3.6.1.4.1.3224.18.6.6.1.6
The address of the border router that should be used for the destination network.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

nsVrBgp4PathAttrMultiExitDisc		1.3.6.1.4.1.3224.18.6.6.1.7
This metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-1..2147483647

nsVrBgp4PathAttrLocalPref		1.3.6.1.4.1.3224.18.6.6.1.8
The originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-1..2147483647

nsVrBgp4PathAttrAtomicAggregate		1.3.6.1.4.1.3224.18.6.6.1.9
Whether or not the local system has selected a less specific route without selecting a more specific route.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	lessSpecificRrouteNotSelected(1), lessSpecificRouteSelected(2)

nsVrBgp4PathAttrAggregatorAS		1.3.6.1.4.1.3224.18.6.6.1.10
The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

nsVrBgp4PathAttrAggregatorAddr		1.3.6.1.4.1.3224.18.6.6.1.11
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

nsVrBgp4PathAttrCalcLocalPref		1.3.6.1.4.1.3224.18.6.6.1.12
The degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	-1..2147483647

nsVrBgp4PathAttrBest		1.3.6.1.4.1.3224.18.6.6.1.13
An indication of whether or not this route was chosen as the best BGP4 route.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

nsVrBgp4PathAttrUnknown		1.3.6.1.4.1.3224.18.6.6.1.14
One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

nsVrBgp4PathAttrVRID		1.3.6.1.4.1.3224.18.6.6.1.15
Virtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048]
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

nsVrBgpTraps		1.3.6.1.4.1.3224.18.6.7
OBJECT IDENTIFIER

nsVrBgpEstablished		1.3.6.1.4.1.3224.18.6.7.1
The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.
Status: current	Access: read-only
NOTIFICATION-TYPE