NEXTNET-MIB

File: NEXTNET-MIB.mib (175437 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215

Imported symbols

NetworkAddress IpAddress enterprises
Counter TimeTicks Gauge
OBJECT-TYPE DisplayString TRAP-TYPE

Defined Types

PhysAddress  
OCTET STRING    

DateAndTime  
DisplayString Size(8|11)    

TruthValue  
INTEGER true(1), false(0)    

TenthdBmV  
INTEGER    

TenthdB  
INTEGER    

ExpedDevBaseInfo  
SEQUENCE    
  expedDevRole INTEGER
  expedDevDateTime DateAndTime
  expedDevSerialNumber DisplayString
  expedDevSTPControl INTEGER
  expedDevGpsStatus DisplayString
  expedDevGpsMonitorState INTEGER
  expedDevGpsClockOK TruthValue
  expedDevPpsStatus TruthValue
  expedDevAirlinkStatus TruthValue
  expedDevWriteFlash INTEGER
  expedDevRebootDevice INTEGER
  expedDevZeroStats INTEGER
  expedDevTemperature INTEGER
  expedDevModelId DisplayString

ExpedDevServerInfo  
SEQUENCE    
  expedDevBootState INTEGER
  expedDevDhcp IpAddress
  expedDevFTPPort INTEGER
  expedDevFTPRemote IpAddress
  expedDevFTPTimeout INTEGER
  expedDevFTPState INTEGER
  expedDevHostTraceAddress DisplayString
  expedDevHostTraceFilter INTEGER
  expedDevHostTraceState INTEGER
  expedDevTelnetPort INTEGER
  expedDevTelnetRemote IpAddress
  expedDevTelnetTimeout INTEGER
  expedDevTelnetState INTEGER
  expedDevWebPort INTEGER
  expedDevWebRemote IpAddress
  expedDevWebState INTEGER
  expedDevSysSector DisplayString
  expedDevSysCell DisplayString
  expedDevSysLocation DisplayString
  expedDevSysName DisplayString
  expedDevVlanPortID INTEGER
  expedDevVlanMgmtID INTEGER
  expedDevVlanUntaggedID INTEGER
  expedDevCpuUtilization INTEGER

ExpedDevEvControlEntry  
SEQUENCE    
  expedDevEvFacility INTEGER
  expedDevEvSyslogMin INTEGER
  expedDevEvTrapMin INTEGER

ExpedIfBaseInfo  
SEQUENCE    
  expedIfAddress PhysAddress
  expedIfAirlinkState INTEGER
  expedIfAirlinkTiming INTEGER
  expedIfAirlinkColorCode INTEGER
  expedIfAirlinkExtRange INTEGER
  expedIfBaseRegNotPref INTEGER
  expedIfBssDownChannelPower TenthdBmV
  expedIfBssDownChannelPowerLimit TenthdBmV
  expedIfBssDownlinkBias INTEGER
  expedIfBssDownSlots INTEGER
  expedIfBssUpSlots INTEGER
  expedIfAirlinkPowerControl INTEGER
  expedIfMaxModLevel INTEGER
  expedIfMaxModLevelString DisplayString
  expedIfMaxModLevelLimit INTEGER
  expedIfSoftRssi INTEGER
  expedIfRadioFrequency DisplayString
  expedIfMaxNumOfCPEs INTEGER
  expedIfMaxNumOfCPEsLimit INTEGER
  expedIfMaxNumOfHosts INTEGER

ExpedIfUplinkSlotUsageEntry  
SEQUENCE    
  expedIfUplinkSlotUsageIndex INTEGER
  expedIfUplinkSlotUsageUseCount Counter
  expedIfUplinkSlotUsageFreeCount Counter
  expedIfUplinkSlotUsageRetryCount Counter
  expedIfUplinkSlotUsageBytesRecvd Counter
  expedIfUplinkSlotUsageMsgsRecvd Counter

ExpedIfUplinkSlotUsageTotals  
SEQUENCE    
  expedIfUplinkSlotTotUseCount Counter
  expedIfUplinkSlotTotFreeCount Counter
  expedIfUplinkSlotTotRetryCount Counter
  expedIfUplinkSlotTotBytesRecvd Counter
  expedIfUplinkSlotTotMsgsRecvd Counter

ExpedIfDownlinkStats  
SEQUENCE    
  expedIfDownlinkBytes Counter
  expedIfDownlinkSymbolsUsed Counter
  expedIfDownlinkSymbolsFree Counter
  expedIfDownlinkMsgsUnicast Counter
  expedIfDownlinkMsgsNUnicast Counter

ExpedIfAirlinkUtilization  
SEQUENCE    
  expedIfDownlinkSaturation INTEGER
  expedIfUplinkSaturation INTEGER

ExpedIfBssRelayStats  
SEQUENCE    
  expedIfBssNumOfCPEs INTEGER
  expedIfBssNumOfHosts INTEGER
  expedIfBssNumOfCPEsHighMark Counter
  expedIfBssNumOfHostsHighMark Counter
  expedIfBssRelayCpeIdleTime INTEGER
  expedIfBssRelayDHCPAgentCircuitId TruthValue
  expedIfBssRelayDHCPAgentRemoteId TruthValue
  expedIfBssRelayDHCPNumAddAgentFail Counter
  expedIfBssRelayDHCPNumDiscardExtraRelayInfo Counter
  expedIfBssRelayDHCPNumDiscardNoEnd Counter
  expedIfBssRelayDHCPTimeout INTEGER
  expedIfBssRelayMaxSSTransit INTEGER
  expedIfBssRelayMaxTransit INTEGER
  expedIfBssRelayIPHosts INTEGER
  expedIfBssRelayPPPOEHosts INTEGER

ExpedIfBssAAAConfig  
SEQUENCE    
  expedIfBssAAAState INTEGER
  expedIfBssAAAConnectionTime DisplayString
  expedIfBssAAAConnectionAttempts Counter
  expedIfBssAAAConfigConnection DisplayString
  expedIfBssAAACurrentConnection IpAddress
  expedIfBssAAAAuthority INTEGER
  expedIfBssAAAPort INTEGER
  expedIfBssAAAHbInterval INTEGER

ExpedIfBssLocalConfig  
SEQUENCE    
  expedIfBssLocalAllow INTEGER
  expedIfBssLocalHosts INTEGER
  expedIfBssLocalSla DisplayString
  expedIfBssLocalVlan INTEGER
  expedIfBssLocalVoipAddress IpAddress
  expedIfBssLocalVoipState INTEGER

ExpedIfBssAAAStats  
SEQUENCE    
  expedIfBssAAARegRequests Counter
  expedIfBssAAACDRsSent Counter
  expedIfBssAAARegConfirms Counter
  expedIfBssAAARegDenys Counter
  expedIfBssAAARegDuplicates Counter
  expedIfBssAAANoAAAResponse Counter
  expedIfBssAAAUnexpectedPV Counter
  expedIfBssAAADroppedCDRS Counter
  expedIfBssAAAPVsRecv Counter
  expedIfBssAAAAllow Counter
  expedIfBssAAADeny Counter
  expedIfBssAAADeregCPE Counter
  expedIfBssAAABindIP Counter
  expedIfBssAAAPutConfig Counter
  expedIfBssAAAFetchConfig Counter
  expedIfBssAAAUnkBase Counter
  expedIfBssAAAVlanAtts Counter
  expedIfBssAAABaseAtts Counter
  expedIfBssAAAReconnect Counter
  expedIfBssAAAHbCdr Counter
  expedIfBssAAAHbPv Counter
  expedIfBssAAAHbDisconnects Counter

ExpedIfBssCpeStatusEntry  
SEQUENCE    
  expedIfBssCpeStatusIndex INTEGER
  expedIfBssCpeStatusMacAddress DisplayString
  expedIfBssCpeStatusBytesFrom Counter
  expedIfBssCpeStatusBytesTo Counter
  expedIfBssCpeStatusMsgsFrom Counter
  expedIfBssCpeStatusMsgsTo Counter
  expedIfBssCpeNumOfHosts INTEGER
  expedIfBssCpeISPId INTEGER
  expedIfBssCpeVID INTEGER
  expedIfBssCpeStatusLastTime DateAndTime
  expedIfBssDynamicIPAssignment TruthValue
  expedIfBssCpeSwVersion DisplayString
  expedIfBssCpeNumOfCalls INTEGER
  expedIfBssCpeDataPolls Counter
  expedIfBssCpeDryPolls Counter
  expedIfBssCpeNoResponse Counter
  expedIfBssCpeCallEfficiency INTEGER
  expedIfBssCpeBWUsage INTEGER
  expedIfBssCpeDownModulation DisplayString
  expedIfBssCpeDownLinkBandWidth DisplayString
  expedIfBssCpeUplinkBandWidth DisplayString
  expedIfBssCpeIdleTime Counter
  expedIfBssCpeModelId DisplayString
  expedIfBssNumStaticHosts INTEGER

ExpedIfBssCpeHostEntry  
SEQUENCE    
  expedIfBssCpeHostIndex INTEGER
  expedIfBssCpeHostMacAddress DisplayString
  expedIfBssCpeAirlinkMacAddress DisplayString
  expedIfBssCpeHostIpAddress IpAddress
  expedIfBssCpeHostIpType DisplayString
  expedIfBssCpeHostPPPOE DisplayString
  expedIfBssCpeHostVLANID INTEGER

ExpedIfBssVlanEntry  
SEQUENCE    
  expedIfBssVlanIndex INTEGER
  expedIfBssVlanNumOfCpes INTEGER
  expedIfBssVlanUpBytes Counter
  expedIfBssVlanUpUnicastPkts Counter
  expedIfBssVlanUpNUnicastPkts Counter
  expedIfBssVlanDnBytes Counter
  expedIfBssVlanDnUnicastPkts Counter
  expedIfBssVlanDnNUnicastPkts Counter
  expedIfBssVlanNumOfHosts INTEGER

ExpedIfBssCPERemoteEntry  
SEQUENCE    
  expedIfBssRemoteCPEIndex INTEGER
  expedIfBssRemoteCPEMacAddress DisplayString
  expedIfBssRemoteCPEPollSuccess TruthValue
  expedIfBssRemoteSlot1-Success Counter
  expedIfBssRemoteSlot1-NoAccess Counter
  expedIfBssRemoteSlot1-Failed Counter
  expedIfBssRemoteSlot2-Success Counter
  expedIfBssRemoteSlot2-NoAccess Counter
  expedIfBssRemoteSlot2-Failed Counter
  expedIfBssRemoteSlot3-Success Counter
  expedIfBssRemoteSlot3-NoAccess Counter
  expedIfBssRemoteSlot3-Failed Counter
  expedIfBssRemoteSlot4-Success Counter
  expedIfBssRemoteSlot4-NoAccess Counter
  expedIfBssRemoteSlot4-Failed Counter
  expedIfBssRemoteSlot5-Success Counter
  expedIfBssRemoteSlot5-NoAccess Counter
  expedIfBssRemoteSlot5-Failed Counter
  expedIfBssRemoteSlot6-Success Counter
  expedIfBssRemoteSlot6-NoAccess Counter
  expedIfBssRemoteSlot6-Failed Counter
  expedIfBssRemoteSlot1-ACK Counter
  expedIfBssRemoteSlot1-NACK Counter
  expedIfBssRemoteSlot1-Busy Counter
  expedIfBssRemoteSlot1-Free Counter
  expedIfBssRemoteSlot1-Lost Counter
  expedIfBssRemoteSlot1-Attempt Counter
  expedIfBssRemoteSlot2-ACK Counter
  expedIfBssRemoteSlot2-NACK Counter
  expedIfBssRemoteSlot2-Busy Counter
  expedIfBssRemoteSlot2-Free Counter
  expedIfBssRemoteSlot2-Lost Counter
  expedIfBssRemoteSlot2-Attempt Counter
  expedIfBssRemoteSlot3-ACK Counter
  expedIfBssRemoteSlot3-NACK Counter
  expedIfBssRemoteSlot3-Busy Counter
  expedIfBssRemoteSlot3-Free Counter
  expedIfBssRemoteSlot3-Lost Counter
  expedIfBssRemoteSlot3-Attempt Counter
  expedIfBssRemoteSlot4-ACK Counter
  expedIfBssRemoteSlot4-NACK Counter
  expedIfBssRemoteSlot4-Busy Counter
  expedIfBssRemoteSlot4-Free Counter
  expedIfBssRemoteSlot4-Lost Counter
  expedIfBssRemoteSlot4-Attempt Counter
  expedIfBssRemoteSlot5-ACK Counter
  expedIfBssRemoteSlot5-NACK Counter
  expedIfBssRemoteSlot5-Busy Counter
  expedIfBssRemoteSlot5-Free Counter
  expedIfBssRemoteSlot5-Lost Counter
  expedIfBssRemoteSlot5-Attempt Counter
  expedIfBssRemoteSlot6-ACK Counter
  expedIfBssRemoteSlot6-NACK Counter
  expedIfBssRemoteSlot6-Busy Counter
  expedIfBssRemoteSlot6-Free Counter
  expedIfBssRemoteSlot6-Lost Counter
  expedIfBssRemoteSlot6-Attempt Counter
  expedIfBssRemoteGoodSymbols Counter
  expedIfBssRemoteBadSymbols Counter
  expedIfBssRemoteUnderFlows Counter
  expedIfBssRemoteOverFlows Counter
  expedIfBssRemoteSymbolCount Counter
  expedIfBssRemoteBadSymbolCount Counter
  expedIfBssRemoteBER INTEGER
  expedIfBssRemoteAvRSSI INTEGER
  expedIfBssRemoteAvVT INTEGER
  expedIfBssRemoteAccumRS Counter
  expedIfBssRemoteScore Counter
  expedIfBssRemoteAirConnectTime DisplayString
  expedIfBssRemoteDiscDownlink Counter
  expedIfBssRemoteDisconnectUpLink Counter
  expedIfBssRemoteHomeColorCode INTEGER
  expedIfBssRemoteExtendedRange TruthValue
  expedIfBssRemoteRangingValue INTEGER
  expedIfBssRemoteTriggerValue INTEGER
  expedIfBssRemoteCPEBaseObsCh1 INTEGER
  expedIfBssRemoteCPEBaseObsMac1 DisplayString
  expedIfBssRemoteCPEBaseObsCC1 INTEGER
  expedIfBssRemoteCPEBaseObsScore1 INTEGER
  expedIfBssRemoteCPEBaseObsAuth1 TruthValue
  expedIfBssRemoteCPEBaseObsBusy1 TruthValue
  expedIfBssRemoteCPEBaseObsRang1 TruthValue
  expedIfBssRemoteCPEBaseObsCh2 INTEGER
  expedIfBssRemoteCPEBaseObsMac2 DisplayString
  expedIfBssRemoteCPEBaseObsCC2 INTEGER
  expedIfBssRemoteCPEBaseObsScore2 INTEGER
  expedIfBssRemoteCPEBaseObsAuth2 TruthValue
  expedIfBssRemoteCPEBaseObsBusy2 TruthValue
  expedIfBssRemoteCPEBaseObsRang2 TruthValue
  expedIfBssRemoteCPEBaseObsCh3 INTEGER
  expedIfBssRemoteCPEBaseObsMac3 DisplayString
  expedIfBssRemoteCPEBaseObsCC3 INTEGER
  expedIfBssRemoteCPEBaseObsScore3 INTEGER
  expedIfBssRemoteCPEBaseObsAuth3 TruthValue
  expedIfBssRemoteCPEBaseObsBusy3 TruthValue
  expedIfBssRemoteCPEBaseObsRang3 TruthValue
  expedIfBssRemoteCPEBaseObsCh4 INTEGER
  expedIfBssRemoteCPEBaseObsMac4 DisplayString
  expedIfBssRemoteCPEBaseObsCC4 INTEGER
  expedIfBssRemoteCPEBaseObsScore4 INTEGER
  expedIfBssRemoteCPEBaseObsAuth4 TruthValue
  expedIfBssRemoteCPEBaseObsBusy4 TruthValue
  expedIfBssRemoteCPEBaseObsRang4 TruthValue
  expedIfBssRemoteCPEBaseObsCh5 INTEGER
  expedIfBssRemoteCPEBaseObsMac5 DisplayString
  expedIfBssRemoteCPEBaseObsCC5 INTEGER
  expedIfBssRemoteCPEBaseObsScore5 INTEGER
  expedIfBssRemoteCPEBaseObsAuth5 TruthValue
  expedIfBssRemoteCPEBaseObsBusy5 TruthValue
  expedIfBssRemoteCPEBaseObsRang5 TruthValue
  expedIfBssRemoteCPEBaseObsCh6 INTEGER
  expedIfBssRemoteCPEBaseObsMac6 DisplayString
  expedIfBssRemoteCPEBaseObsCC6 INTEGER
  expedIfBssRemoteCPEBaseObsScore6 INTEGER
  expedIfBssRemoteCPEBaseObsAuth6 TruthValue
  expedIfBssRemoteCPEBaseObsBusy6 TruthValue
  expedIfBssRemoteCPEBaseObsRang6 TruthValue
  expedIfBssRemoteCPENumActCalls INTEGER
  expedIfBssRemoteCPEDataPolls Counter
  expedIfBssRemoteCPEDryPolls Counter
  expedIfBssRemoteCPEUnexpected Counter
  expedIfBssRemoteCPEBWUsage INTEGER
  expedIfBssRemoteCPEEfficiency INTEGER
  expedIfBssRemoteCPEHighWater Counter
  expedIfBssRemoteCPEVoiceFrRt INTEGER
  expedIfBssRemoteCPEAvgNPI INTEGER
  expedIfBssRemoteCPEConcatBuffers Counter
  expedIfBssRemoteCPENumBufConcat Counter
  expedIfBssRemoteCPECurrentTemp INTEGER
  expedIfBssRemoteCPETxPower INTEGER
  expedIfBssRemoteCPEQPSKUp Counter
  expedIfBssRemoteCPEQPSKDown Counter
  expedIfBssRemoteCPE16QUp Counter
  expedIfBssRemoteCPE16QDown Counter
  expedIfBssRemoteCPE64QUp Counter
  expedIfBssRemoteCPE64QDown Counter
  expedIfBssRemoteCPE16QLiteUp Counter
  expedIfBssRemoteCPE16QLiteDown Counter
  expedIfBssRemoteCurrentRxLevel DisplayString
  expedIfBssRemoteCurrentTxLevel DisplayString

ExpedIfBssCPERemoteEntry1  
SEQUENCE    
  expedIfBssRemoteCPEIndex INTEGER
  expedIfBssRemoteCPEMacAddress DisplayString
  expedIfBssRemoteCPEPollSuccess TruthValue
  expedIfBssRemoteSlot1-Success Counter
  expedIfBssRemoteSlot1-NoAccess Counter
  expedIfBssRemoteSlot1-Failed Counter
  expedIfBssRemoteSlot2-Success Counter
  expedIfBssRemoteSlot2-NoAccess Counter
  expedIfBssRemoteSlot2-Failed Counter
  expedIfBssRemoteSlot3-Success Counter
  expedIfBssRemoteSlot3-NoAccess Counter
  expedIfBssRemoteSlot3-Failed Counter
  expedIfBssRemoteSlot4-Success Counter
  expedIfBssRemoteSlot4-NoAccess Counter
  expedIfBssRemoteSlot4-Failed Counter
  expedIfBssRemoteSlot5-Success Counter
  expedIfBssRemoteSlot5-NoAccess Counter
  expedIfBssRemoteSlot5-Failed Counter
  expedIfBssRemoteSlot6-Success Counter
  expedIfBssRemoteSlot6-NoAccess Counter
  expedIfBssRemoteSlot6-Failed Counter

ExpedIfBssCPERemoteEntry2  
SEQUENCE    
  expedIfBssRemoteCPEIndex INTEGER
  expedIfBssRemoteCPEMacAddress DisplayString
  expedIfBssRemoteCPEPollSuccess TruthValue
  expedIfBssRemoteSlot1-ACK Counter
  expedIfBssRemoteSlot1-NACK Counter
  expedIfBssRemoteSlot1-Busy Counter
  expedIfBssRemoteSlot1-Free Counter
  expedIfBssRemoteSlot1-Lost Counter
  expedIfBssRemoteSlot1-Attempt Counter
  expedIfBssRemoteSlot2-ACK Counter
  expedIfBssRemoteSlot2-NACK Counter
  expedIfBssRemoteSlot2-Busy Counter
  expedIfBssRemoteSlot2-Free Counter
  expedIfBssRemoteSlot2-Lost Counter
  expedIfBssRemoteSlot2-Attempt Counter
  expedIfBssRemoteSlot3-ACK Counter
  expedIfBssRemoteSlot3-NACK Counter
  expedIfBssRemoteSlot3-Busy Counter
  expedIfBssRemoteSlot3-Free Counter
  expedIfBssRemoteSlot3-Lost Counter
  expedIfBssRemoteSlot3-Attempt Counter
  expedIfBssRemoteSlot4-ACK Counter
  expedIfBssRemoteSlot4-NACK Counter
  expedIfBssRemoteSlot4-Busy Counter
  expedIfBssRemoteSlot4-Free Counter
  expedIfBssRemoteSlot4-Lost Counter
  expedIfBssRemoteSlot4-Attempt Counter
  expedIfBssRemoteSlot5-ACK Counter
  expedIfBssRemoteSlot5-NACK Counter
  expedIfBssRemoteSlot5-Busy Counter
  expedIfBssRemoteSlot5-Free Counter
  expedIfBssRemoteSlot5-Lost Counter
  expedIfBssRemoteSlot5-Attempt Counter
  expedIfBssRemoteSlot6-ACK Counter
  expedIfBssRemoteSlot6-NACK Counter
  expedIfBssRemoteSlot6-Busy Counter
  expedIfBssRemoteSlot6-Free Counter
  expedIfBssRemoteSlot6-Lost Counter
  expedIfBssRemoteSlot6-Attempt Counter

ExpedIfBssCPERemoteEntry3  
SEQUENCE    
  expedIfBssRemoteCPEIndex INTEGER
  expedIfBssRemoteCPEMacAddress DisplayString
  expedIfBssRemoteCPEPollSuccess TruthValue
  expedIfBssRemoteGoodSymbols Counter
  expedIfBssRemoteBadSymbols Counter
  expedIfBssRemoteUnderFlows Counter
  expedIfBssRemoteOverFlows Counter
  expedIfBssRemoteSymbolCount Counter
  expedIfBssRemoteBadSymbolCount Counter
  expedIfBssRemoteBER INTEGER
  expedIfBssRemoteAvRSSI INTEGER
  expedIfBssRemoteAvVT INTEGER
  expedIfBssRemoteAccumRS Counter
  expedIfBssRemoteScore Counter
  expedIfBssRemoteAirConnectTime DisplayString
  expedIfBssRemoteDiscDownlink Counter
  expedIfBssRemoteDisconnectUpLink Counter
  expedIfBssRemoteHomeColorCode INTEGER
  expedIfBssRemoteExtendedRange TruthValue
  expedIfBssRemoteRangingValue INTEGER
  expedIfBssRemoteTriggerValue INTEGER

ExpedIfBssCPERemoteEntry4  
SEQUENCE    
  expedIfBssRemoteCPEIndex INTEGER
  expedIfBssRemoteCPEMacAddress DisplayString
  expedIfBssRemoteCPEPollSuccess TruthValue
  expedIfBssRemoteCPEBaseObsCh1 INTEGER
  expedIfBssRemoteCPEBaseObsMac1 DisplayString
  expedIfBssRemoteCPEBaseObsCC1 INTEGER
  expedIfBssRemoteCPEBaseObsScore1 INTEGER
  expedIfBssRemoteCPEBaseObsAuth1 TruthValue
  expedIfBssRemoteCPEBaseObsBusy1 TruthValue
  expedIfBssRemoteCPEBaseObsRang1 TruthValue
  expedIfBssRemoteCPEBaseObsCh2 INTEGER
  expedIfBssRemoteCPEBaseObsMac2 DisplayString
  expedIfBssRemoteCPEBaseObsCC2 INTEGER
  expedIfBssRemoteCPEBaseObsScore2 INTEGER
  expedIfBssRemoteCPEBaseObsAuth2 TruthValue
  expedIfBssRemoteCPEBaseObsBusy2 TruthValue
  expedIfBssRemoteCPEBaseObsRang2 TruthValue
  expedIfBssRemoteCPEBaseObsCh3 INTEGER
  expedIfBssRemoteCPEBaseObsMac3 DisplayString
  expedIfBssRemoteCPEBaseObsCC3 INTEGER
  expedIfBssRemoteCPEBaseObsScore3 INTEGER
  expedIfBssRemoteCPEBaseObsAuth3 TruthValue
  expedIfBssRemoteCPEBaseObsBusy3 TruthValue
  expedIfBssRemoteCPEBaseObsRang3 TruthValue
  expedIfBssRemoteCPEBaseObsCh4 INTEGER
  expedIfBssRemoteCPEBaseObsMac4 DisplayString
  expedIfBssRemoteCPEBaseObsCC4 INTEGER
  expedIfBssRemoteCPEBaseObsScore4 INTEGER
  expedIfBssRemoteCPEBaseObsAuth4 TruthValue
  expedIfBssRemoteCPEBaseObsBusy4 TruthValue
  expedIfBssRemoteCPEBaseObsRang4 TruthValue
  expedIfBssRemoteCPEBaseObsCh5 INTEGER
  expedIfBssRemoteCPEBaseObsMac5 DisplayString
  expedIfBssRemoteCPEBaseObsCC5 INTEGER
  expedIfBssRemoteCPEBaseObsScore5 INTEGER
  expedIfBssRemoteCPEBaseObsAuth5 TruthValue
  expedIfBssRemoteCPEBaseObsBusy5 TruthValue
  expedIfBssRemoteCPEBaseObsRang5 TruthValue
  expedIfBssRemoteCPEBaseObsCh6 INTEGER
  expedIfBssRemoteCPEBaseObsMac6 DisplayString
  expedIfBssRemoteCPEBaseObsCC6 INTEGER
  expedIfBssRemoteCPEBaseObsScore6 INTEGER
  expedIfBssRemoteCPEBaseObsAuth6 TruthValue
  expedIfBssRemoteCPEBaseObsBusy6 TruthValue
  expedIfBssRemoteCPEBaseObsRang6 TruthValue

ExpedIfBssCPERemoteEntry5  
SEQUENCE    
  expedIfBssRemoteCPEPollSuccess TruthValue
  expedIfBssRemoteCPENumActCalls INTEGER
  expedIfBssRemoteCPEDataPolls Counter
  expedIfBssRemoteCPEDryPolls Counter
  expedIfBssRemoteCPEUnexpected Counter
  expedIfBssRemoteCPEBWUsage INTEGER
  expedIfBssRemoteCPEEfficiency INTEGER
  expedIfBssRemoteCPEHighWater Counter
  expedIfBssRemoteCPEVoiceFrRt INTEGER
  expedIfBssRemoteCPEAvgNPI INTEGER

ExpedIfBssCPERemoteEntry6  
SEQUENCE    
  expedIfBssRemoteCPEPollSuccess TruthValue
  expedIfBssRemoteCPEConcatBuffers Counter
  expedIfBssRemoteCPENumBufConcat Counter
  expedIfBssRemoteCPECurrentTemp INTEGER
  expedIfBssRemoteCPETxPower INTEGER
  expedIfBssRemoteCPEQPSKUp Counter
  expedIfBssRemoteCPEQPSKDown Counter
  expedIfBssRemoteCPE16QUp Counter
  expedIfBssRemoteCPE16QDown Counter
  expedIfBssRemoteCPE64QUp Counter
  expedIfBssRemoteCPE64QDown Counter
  expedIfBssRemoteCPE16QLiteUp Counter
  expedIfBssRemoteCPE16QLiteDown Counter
  expedIfBssRemoteCurrentRxLevel DisplayString
  expedIfBssRemoteCurrentTxLevel DisplayString

ExpedIfBssRemotePollConfig  
SEQUENCE    
  expedIfBssRemotePollInterval INTEGER
  expedIfBssRemotePollTimeout INTEGER

ExpedIfBssVOIPConfig  
SEQUENCE    
  expedIfBssNoResToPollTimeout INTEGER
  expedIfBssMaxNumberOfCalls INTEGER
  expedIfBssCurrentNumberOfCalls INTEGER
  expedIfBssAdmissionCtrl INTEGER
  expedIfBssNumberOfReleaseRetries INTEGER
  expedIfBssHiModulation INTEGER

ExpedIfBssVOIPStats  
SEQUENCE    
  expedIfBssNumOfCallPri0 Counter
  expedIfBssNumOfCallPri1 Counter
  expedIfBssNumOfCallPri2 Counter
  expedIfBssNumOfCallPri3 Counter
  expedIfBssNumOfCallRoamPri0 Counter
  expedIfBssNumOfCallRoamPri1 Counter
  expedIfBssNumOfCallRoamPri2 Counter
  expedIfBssNumOfCallRoamPri3 Counter
  expedIfBssNumOfCallPreemptedPri0 Counter
  expedIfBssNumOfCallPreemptedPri1 Counter
  expedIfBssNumOfCallPreemptedPri2 Counter
  expedIfBssNumOfBusyCallOrigPri0 Counter
  expedIfBssNumOfBusyCallOrigPri1 Counter
  expedIfBssNumOfBusyCallOrigPri2 Counter
  expedIfBssNumOfBusyCallOrigPri3 Counter
  expedIfBssNumOfBusyCallTermPri0 Counter
  expedIfBssNumOfBusyCallTermPri1 Counter
  expedIfBssNumOfBusyCallTermPri2 Counter
  expedIfBssNumOfBusyCallTermPri3 Counter
  expedIfBssNumOfVoIPNotAllowOrig Counter
  expedIfBssNumOfVoIPNotAllowTerm Counter
  expedIfBssNumOfVoIPNotAuthOrig Counter
  expedIfBssNumOfVoIPNotAuthTerm Counter

ExpedIfBssModTblEntry  
SEQUENCE    
  expedIfBssModTblIndex INTEGER
  expedIfBssModTblName DisplayString
  expedIfBssModTblUpSlotUsage Counter
  expedIfBssModTblUpSlotVOIP Counter
  expedIfBssModTblUpBytes Counter
  expedIfBssModTblUpMessages Counter
  expedIfBssModTblDownSlotUsage Counter
  expedIfBssModTblDownBytes Counter
  expedIfBssModTblNumCPES INTEGER
  expedIfBssModTblChgReqs Counter
  expedIfBssModTblDownBytesVOIP Counter
  expedIfBssModTblUpBytesVOIP Counter

ExpedDevTrapInfo  
SEQUENCE    
  expedDevTrapBTSName DisplayString
  expedDevTrapBTSLocation DisplayString
  expedDevTrapBTSMessage DisplayString

Defined Values

nextnet 1.3.6.1.4.1.4743
OBJECT IDENTIFIER    

expedDev 1.3.6.1.4.1.4743.1
OBJECT IDENTIFIER    

expedDevTrap 1.3.6.1.4.1.4743.2
OBJECT IDENTIFIER    

expedDevMIBObjects 1.3.6.1.4.1.4743.1.1
OBJECT IDENTIFIER    

expedDevBase 1.3.6.1.4.1.4743.1.1.1
OBJECT IDENTIFIER    

expedDevRole 1.3.6.1.4.1.4743.1.1.1.1
Defines the current role of this device. cpe (1) is a Customer Premises Equipment, bssActive(2) is a Base Station System which is controlling the system of CPE devices, and bssBackup(3) is a Base Station system which is currently connected, but not controlling the system (not currently used). In general, if this device is a 'cpe', its role will not change during operation or between reboots. If the device is a 'bss' it may change between bssActive and bssBackup and back again during normal operation. At this time, the NextNet Expedience system does not support the concept of a backup BSS, bssBackup is included for completeness.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER cpe(1), bssActive(2), bssBackup(3)  

expedDevDateTime 1.3.6.1.4.1.4743.1.1.1.2
The date and time, with optional timezone information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

expedDevSerialNumber 1.3.6.1.4.1.4743.1.1.1.3
The manufacturer's serial number for this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

expedDevSTPControl 1.3.6.1.4.1.4743.1.1.1.4
This object controls operation of the spanning tree protocol (as distinguished from transparent bridging). If set to stEnabled(1) then the spanning tree protocol is enabled, subject to bridging constraints. If noStFilterBpdu(2), then spanning tree is not active, and Bridge PDUs received are discarded. If noStPassBpdu(3) then spanning tree is not active and Bridge PDUs are transparently forwarded. Note that a device need not implement all of these options, but that noStFilterBpdu(2) is required.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER stEnabled(1), noStFilterBpdu(2), noStPassBpdu(3)  

expedDevGpsStatus 1.3.6.1.4.1.4743.1.1.1.5
The status string coming from the GPS
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

expedDevGpsMonitorState 1.3.6.1.4.1.4743.1.1.1.6
The state of the GPS Clock Monitor. The following states are possible. gCState-NoGps (No GPS for this base station), gCState-Init (Waiting for init to complete), gCState-Correcting (initial time solved, needs correction) gCState-Undetermined (floating init time solution), gCState-Unreliable (init time drifted too far), gCState-Locked (full time solution), gCState-Floating (Floating full time solution), and gCState-Drifted (full time solution drifted too far.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER gCState-NoGps(0), gCState-Init(1), gCState-Correcting(2), gCState-Undetermined(3), gCState-Unreliable(4), gCState-Locked(5), gCState-Floating(6), gCState-Drifted(7)  

expedDevGpsClockOK 1.3.6.1.4.1.4743.1.1.1.7
Indicates whether the GPS timing pulse is considered valid. If a base is operating without a GPS unit, then this element will be True.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedDevPpsStatus 1.3.6.1.4.1.4743.1.1.1.8
Indicates whether the one-second timing pulse is being delivered to the base station. If a base is operating with a GPS unit, then the timing pulse refers to the pulse being delivered by the GPS unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedDevAirlinkStatus 1.3.6.1.4.1.4743.1.1.1.9
The status of the Airlink.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedDevWriteFlash 1.3.6.1.4.1.4743.1.1.1.10
Setting this flag to enable will cause the configuration to be written to flash
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedDevRebootDevice 1.3.6.1.4.1.4743.1.1.1.11
Setting this flag to enable will cause the device to be rebooted
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedDevZeroStats 1.3.6.1.4.1.4743.1.1.1.12
Zeros out the appropriate stats
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(0), device(1), airlink(2), ethernet(3), aaa(4), relay(5), throughput(6), all(7)  

expedDevTemperature 1.3.6.1.4.1.4743.1.1.1.13
Current temperature of the device
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedDevModelId 1.3.6.1.4.1.4743.1.1.1.14
Model Identifier for the base station. The primary hardware features of the base station are specified by this string representation of a hexidecimal, 32-bit number with a range of 00000000 - FFFFFFFF and a format of ABCCDDEE. A => Model Category 0 => Outdoor Base Station 1 => Indoor CPE 2 => Outdoor CPE 3 => Indoor Base Station 4 => Mobile Subscriber Unit B => Reserved 0 => Default CC => Board Type 01 => FPGA Wedge 02 => Dual Board ASIC Wedge, Davicom 03 => Single Board ASIC Wedge, SMSC, Indoor 04 => Single Board ASIC, SMSC, Outdoor 05 => Slimline, ASIC 12 => AMOD Dual Board, ASIC 15 => AMOD Slimline, ASIC 16 => AMOD 5407 Coldfire, ASIC 17 => AMOD LX CPE 18 => AMOD LX SoC CPE 22 => AMOD 5484 Coldfire, ASIC Base DD => Reserved 00 => 2.6 GHz 01 => 3.3 GHz 02 => 3.5 GHz 03 => 2.4 GHz 04 => 2.3 GHz 05 => 700MHz 06 => 3.7 GHz EE => Special Options 00 => External Antenna 01 => Vertical Antenna 02 => Horizontal Antenna
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedDevSoftware 1.3.6.1.4.1.4743.1.1.2
OBJECT IDENTIFIER    

expedDevSwCurrentVers 1.3.6.1.4.1.4743.1.1.2.1
The software version currently operating in this device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

expedDevServer 1.3.6.1.4.1.4743.1.1.3
OBJECT IDENTIFIER    

expedDevBootState 1.3.6.1.4.1.4743.1.1.3.1
If operational(1), the device has completed loading and processing of configuration parameters and the Base Station is operational. If airlinkdisabled(2) then the device was administratively disabled. If privatemode(3), the device is operational and is in privatemode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER operational(1), airlinkdisabled(2), privatemode(3), unknown(4)  

expedDevDhcp 1.3.6.1.4.1.4743.1.1.3.2
The IP address of the DHCP server that assigned an IP address to this device. Returns 0.0.0.0 if DHCP was not used for IP address assignment.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

expedDevFTPPort 1.3.6.1.4.1.4743.1.1.3.3
The port number that FTP is listening on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

expedDevFTPRemote 1.3.6.1.4.1.4743.1.1.3.4
The IP address mask that is allowed access to FTP. 255.255.255.255 allows access to everyone.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

expedDevFTPTimeout 1.3.6.1.4.1.4743.1.1.3.5
The max timeout in seconds to allow an FTP session to remain idle.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..1000  

expedDevFTPState 1.3.6.1.4.1.4743.1.1.3.6
Enables/Disables FTP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedDevHostTraceAddress 1.3.6.1.4.1.4743.1.1.3.7
The MAC address of the host to trace for debugging host traffic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

expedDevHostTraceFilter 1.3.6.1.4.1.4743.1.1.3.8
This parameter allows a user to filter out host trace messages (i.e. discard them) for broadcast, or uplink or downlink frames.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), broadcast(2), upstream(3), downstream(4), broadcast-upstream(5), broadcast-downstream(6)  

expedDevHostTraceState 1.3.6.1.4.1.4743.1.1.3.9
Enable/Disable individual host syslog tracing.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedDevTelnetPort 1.3.6.1.4.1.4743.1.1.3.10
The port number that Telnet is listening on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

expedDevTelnetRemote 1.3.6.1.4.1.4743.1.1.3.11
The IP address mask that is allowed access to Telnet. 255.255.255.255 allows access to everyone.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

expedDevTelnetTimeout 1.3.6.1.4.1.4743.1.1.3.12
The max timeout in seconds to allow a Telnet session to remain idle.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..1000  

expedDevTelnetState 1.3.6.1.4.1.4743.1.1.3.13
Enables/Disables Telnet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedDevWebPort 1.3.6.1.4.1.4743.1.1.3.14
The port number that WEB is listening on. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

expedDevWebRemote 1.3.6.1.4.1.4743.1.1.3.15
The IP address mask that is allowed access to Web. 255.255.255.255 allows access to everyone. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

expedDevWebState 1.3.6.1.4.1.4743.1.1.3.16
Enables/Disables WEB. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedDevVTTimeout 1.3.6.1.4.1.4743.1.1.3.17
The max timeout in seconds to allow a Virtual Telnet session to wait for a reponse. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER  

expedDevSysSector 1.3.6.1.4.1.4743.1.1.3.18
The system sector.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

expedDevSysCell 1.3.6.1.4.1.4743.1.1.3.19
The system cell.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..20)  

expedDevVlanPortID 1.3.6.1.4.1.4743.1.1.3.20
The Ethernet Port VLAN ID. The PVID is the VLAN ID that is applied to any received frames on the Ethernet port that are not tagged with a VLAN ID. This parameter only takes effect following a reboot of the base station. Setting to 0 disables this feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4094  

expedDevVlanLegacyID 1.3.6.1.4.1.4743.1.1.3.21
The VLAN legacy ID. Selects the VLAN ID for all legacy CPEs that register with the base station. This parameter only takes effect following a reboot of the base station. A legacy CPE is defined as a CPE running 1.X code. Note that this VLAN ID is applied to all CPE's when AAA Authority is local. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssAAALocalVlan.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER  

expedDevVlanMgmtID 1.3.6.1.4.1.4743.1.1.3.22
The VLAN Management ID. Selects the VLAN ID of the management VLAN, which is the VLAN used by the local IP stack of the base stations. This parameter only takes effect following a reboot of the base station.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

expedDevVlanUntaggedID 1.3.6.1.4.1.4743.1.1.3.23
The VLAN Untagged ID. Configures the selected VLAN to transmit untagged frames (no 802.1Q tag). This parameter only takes effect following a reboot of the base station. Any Ethernet frames transmitted from the base station on this VLAN will be untagged. Setting to 0 disables this feature.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4094  

expedDevSysLocation 1.3.6.1.4.1.4743.1.1.3.24
The system location.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..20)  

expedDevSysName 1.3.6.1.4.1.4743.1.1.3.25
The system name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

expedDevCpuUtilization 1.3.6.1.4.1.4743.1.1.3.26
The current base station CPU utilization, expressed as a percentage.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedDevEvent 1.3.6.1.4.1.4743.1.1.4
OBJECT IDENTIFIER    

expedDevEvSyslog 1.3.6.1.4.1.4743.1.1.4.1
The IP address of the Syslog server. If 0.0.0.0, syslog transmission is inhibited.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

expedDevEvSyslogState 1.3.6.1.4.1.4743.1.1.4.2
Enables/Disables Syslog.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedDevEvControlTable 1.3.6.1.4.1.4743.1.1.4.3
This table allows control of the reporting of event classes. For each event facility, the minimum level to send a syslog message and the minimum level to send a trap can be configured.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExpedDevEvControlEntry

expedDevEvControlEntry 1.3.6.1.4.1.4743.1.1.4.3.1
Allows configuration of the reporting mechanisms for a particular event priority.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExpedDevEvControlEntry  

expedDevEvFacility 1.3.6.1.4.1.4743.1.1.4.3.1.1
The Facility Level to control for sending traps and syslog messages. log-fac-cfginit is used to control traps and syslog messagesfor configuration and initialization, log-fac-airlink-mac is used to control traps and syslog messagesfor the airlink mac, log-fac-nnmgr is used to control traps and syslog messages for the the airlink manager, log-fac-relay is used to control traps and syslog messages for the the relay, log-fac-stack is used to control traps and syslog messages for the the ip stack, log-fac-aaa is used to control traps and syslog messages for the aaa server, log-fac-ether-mac is used to control traps and syslog messages for the ethernet driver
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER log-fac-cfginit(16), log-fac-airlink-mac(17), log-fac-nnmgr(18), log-fac-relay(19), log-fac-stack(20), log-fac-aaa(21)  

expedDevEvSyslogMin 1.3.6.1.4.1.4743.1.1.4.3.1.2
Defines the minimum level for sending a syslog message, all syslog messages at and above this level will be sent to the syslog server
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER log-priority-emergency(0), log-priority-alert(1), log-priority-critical(2), log-priority-error(3), log-priority-warning(4), log-priority-notice(5), log-priority-info(6), log-priority-debug(7)  

expedDevEvTrapMin 1.3.6.1.4.1.4743.1.1.4.3.1.3
Defines the minimum level for sending a syslog message, all syslog messages at and above this level will be sent to the SNMP manger as a trap
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER log-priority-emergency(0), log-priority-alert(1), log-priority-critical(2), log-priority-error(3), log-priority-warning(4), log-priority-notice(5), log-priority-info(6), log-priority-debug(7)  

expedDevFilter 1.3.6.1.4.1.4743.1.1.5
OBJECT IDENTIFIER    

expedIfMibObjects 1.3.6.1.4.1.4743.1.2
OBJECT IDENTIFIER    

expedIfBaseObjects 1.3.6.1.4.1.4743.1.2.1
OBJECT IDENTIFIER    

expedIfAddress 1.3.6.1.4.1.4743.1.2.1.1
The Device airlink MAC address
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

expedIfChannelId 1.3.6.1.4.1.4743.1.2.1.2
The Base Station System identification of the channel within this particular MAC interface. If the interface is down, the object returns the most current value. If the channel ID is unknown, this object returns a value of 0. This object is obsolete as of base station software version 4.3 and is replaced by expedIfRadioFrequency.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

expedIfChannelFrequency 1.3.6.1.4.1.4743.1.2.1.3
The center of the frequency associated with the channel in use, which is stored in expedIfChannelId. The unit of this object is KHz. This object is obsolete as of base station software version 4.3 and is replaced by expedIfRadioFrequency.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..50000000  

expedIfChannelWidth 1.3.6.1.4.1.4743.1.2.1.4
The width of the channel in use, which is stored in expedIfChannelId. Most implementations are expected to support a channel width of 6 MHz (North America) and/or 8 MHz (Europe). The unit of this object is KHz. This object is obsolete as of base station software version 4.3 and is replaced by expedIfRadioFrequency.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..100000  

expedIfTXAGC 1.3.6.1.4.1.4743.1.2.1.5
This specifies the automatic gain control (AGC) applied to the transmitter, for setting the maximum power output of the transmitter. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfAirlinkState 1.3.6.1.4.1.4743.1.2.1.6
This enables and disables the airlink
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedIfRXAGC 1.3.6.1.4.1.4743.1.2.1.7
This specifies the the automatic gain control applied to the receiver. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfAirlinkTiming 1.3.6.1.4.1.4743.1.2.1.9
This selects the source for the one pulse-per-second. The source will either be external, meaning a GPS source, internal, or external pulse-per-second generated without a GPS unit. The time synchronization signal is needed to ascertain the proper timing for TDD (Time Division Duplexing).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER external(1), internal(2), external-no-GPS(3)  

expedIfAirlinkColorCode 1.3.6.1.4.1.4743.1.2.1.10
This sets the home color code for this base station. The color code is broadcasted to all CPE's.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

expedIfAirlinkExtRange 1.3.6.1.4.1.4743.1.2.1.11
This sets the maximum cell size that is broadcasted to all CPE's. Each step indicates a 5 mile radius cell size. CPE's outside the advertised cell size will not try to register with this base.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..3  

expedIfBaseRegNotPref 1.3.6.1.4.1.4743.1.2.1.12
Controls registration for this base. If set to True then this Base is advertising to other CPE's that it is busy and should try other bases first. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedIfBssDownChannelPower 1.3.6.1.4.1.4743.1.2.1.13
The Base Station System operational transmit power. The range is 6 to 31 for 2 watts base, 10 to 31 for 2 watts base and 16 to 31 for 0.5 watts base. If the interface is down, this object either returns the configured value, the most current value or the value of 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TenthdBmV  

expedIfBssDownChannelPowerLimit 1.3.6.1.4.1.4743.1.2.1.35
The minimum limit of the Base Station System operational transmit power. The value is 16 for 0.5 watts base, 10 for 2 watts base, and 6 for 5 watts base.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TenthdBmV  

expedIfBssDownlinkBias 1.3.6.1.4.1.4743.1.2.1.14
The Base Station System Downlink Bias. This Bias sets up the number of uplink and downlink slots.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

expedIfBssDownSlots 1.3.6.1.4.1.4743.1.2.1.15
Directs the Base Station to transmit this number of down link symbols in each frame. Note that this number must be related to the number of up link symbols as follows: (Down Link Symbols) = (Up Link Symbols) + (Down Link Up Link Bias) * 4.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssUpSlots 1.3.6.1.4.1.4743.1.2.1.16
Directs the Base Station to expect this number of up link symbols in each frame. This is the number of down link symbols that will contain an UCS field. A CPE determines the existence of an up link symbol slot by detecting this UCS. This is a system wide configuration number and is used by the CPEs to facilitate frame synchronization. This number is to be a multiple of three (0,3,6,x). If this number is 0 then the system will be set up for continuous down link operation, allowing no up link operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfAirlinkPowerControl 1.3.6.1.4.1.4743.1.2.1.17
Enables and disables the airlink power control task. This task when enabled will shut the airlink down when power goes below a pre-determined power level or goes above a pre-determined power level.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedIfUplinkSlotUsageTable 1.3.6.1.4.1.4743.1.2.1.18
At the CPE, describes the PHY signal quality of downstream channels. At the BSS, describes the PHY signal quality of upstream channels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExpedIfUplinkSlotUsageEntry

expedIfUplinkSlotUsageEntry 1.3.6.1.4.1.4743.1.2.1.18.1
Status information for an uplink slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExpedIfUplinkSlotUsageEntry  

expedIfUplinkSlotUsageIndex 1.3.6.1.4.1.4743.1.2.1.18.1.1
Index value to uniquely identify an entry in this table, on a per-slot basis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..6  

expedIfUplinkSlotUsageUseCount 1.3.6.1.4.1.4743.1.2.1.18.1.2
Number of good symbols in slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfUplinkSlotUsageFreeCount 1.3.6.1.4.1.4743.1.2.1.18.1.3
Number of free slots.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfUplinkSlotUsageRetryCount 1.3.6.1.4.1.4743.1.2.1.18.1.4
Number of symbols that had to be retried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfUplinkSlotUsageBytesRecvd 1.3.6.1.4.1.4743.1.2.1.18.1.5
Number of bytes in the received messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfUplinkSlotUsageMsgsRecvd 1.3.6.1.4.1.4743.1.2.1.18.1.6
Number of received messages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfUplinkSlotTotUseCount 1.3.6.1.4.1.4743.1.2.1.19
Number of good symbols in all 6 slots combined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfUplinkSlotTotFreeCount 1.3.6.1.4.1.4743.1.2.1.20
Number of free slots in all 6 slots combined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfUplinkSlotTotRetryCount 1.3.6.1.4.1.4743.1.2.1.21
Number of symbols that had to be retried in all 6 slots combined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfUplinkSlotTotBytesRecvd 1.3.6.1.4.1.4743.1.2.1.22
Number of bytes in the received messages in all 6 slots combined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfUplinkSlotTotMsgsRecvd 1.3.6.1.4.1.4743.1.2.1.23
Number of received messages in all 6 slots combined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfDownlinkBytes 1.3.6.1.4.1.4743.1.2.1.24
Number of bytes on the downlink.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfDownlinkSymbolsUsed 1.3.6.1.4.1.4743.1.2.1.25
Number of symbols used on the downlink.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfDownlinkSymbolsFree 1.3.6.1.4.1.4743.1.2.1.26
Number of symbols free on the downlink.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfDownlinkMsgsUnicast 1.3.6.1.4.1.4743.1.2.1.27
Number of messages on the downlink that are unicast.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfDownlinkMsgsNUnicast 1.3.6.1.4.1.4743.1.2.1.28
Number of messages on the downlink that are broadcast.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfDownlinkSaturation 1.3.6.1.4.1.4743.1.2.1.29
Percent of slot usage on the downlink.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfUplinkSaturation 1.3.6.1.4.1.4743.1.2.1.30
Percent of saturation on the uplink.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfMaxModLevel 1.3.6.1.4.1.4743.1.2.1.31
Maximum modulation level for base. The acceptable values are 0 (QPSK), 1 (16 QAM), 2 (64 QAM) and 5 (16 QAM Lite).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..5  

expedIfMaxModLevelString 1.3.6.1.4.1.4743.1.2.1.32
Maximum modulation level for base in string format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfMaxModLevelLimit 1.3.6.1.4.1.4743.1.2.1.36
The limit of the maximum modulation level for base. The acceptable values are 0 (QPSK), 1 (16 QAM), 2 (64 QAM) and 5 (16 QAM Lite).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..5  

expedIfSoftRssi 1.3.6.1.4.1.4743.1.2.1.33
This setting represents a transmit limit on the registered CPEs. A CPE will reduce its transmit power if its downlink RSSI is greater than this value. Transmit power will be reduced by the difference between the downlink RSSI and this value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 42..66  

expedIfRadioFrequency 1.3.6.1.4.1.4743.1.2.1.34
This object represents the configured frequency and bandwidth for the Airlink tranceiver in the target base station device. The format of this string is -[:]. The frequency specifies the center frequency in KHz. This value must be a multiple of 250, have exactly 7 decimal digits, and fall between the low and high frequency calibration points for the target base station device. The bandwidth specifies the width of the frequency in HKz. This value must be one of the following: 2500, 2750, 3000, 3500, 4000, 5000, 5500, 6000, 7000, or 8000. Most implementations are expected to support a channel width of 6000 KHz (North America) and/or 8000 KHz (Europe). This object replaces the expedIfChannelId, expedIfChannelFrequency, and expedIfChannelWidth objects.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

expedIfMaxNumOfCPEs 1.3.6.1.4.1.4743.1.2.1.37
Maximum cpes supported by the base DB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..1000  

expedIfMaxNumOfCPEsLimit 1.3.6.1.4.1.4743.1.2.1.38
The limit of the maximum cpes supported by the base DB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 10..1000  

expedIfMaxNumOfHosts 1.3.6.1.4.1.4743.1.2.1.39
Maximum hosts supported by the base DB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 100..2000  

expedIfBssObjects 1.3.6.1.4.1.4743.1.2.2
OBJECT IDENTIFIER    

expedIfBssCapabilities 1.3.6.1.4.1.4743.1.2.2.1
Identifies the capabilities of the BSS MAC implementation at this interface. Note that packet transmission is always supported. Therefore, there is no specific bit required to explicitely indicate this capability.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER packet(0), atmCells(1), voiceCells(2), concatenation-voiceCells(3), voiceCells-atmCells(4), voiceCells-atmCells-concat(5)  

expedIfBssNumOfCPEs 1.3.6.1.4.1.4743.1.2.2.2
Number of CPE's currently registered on the Base station
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssNumOfHosts 1.3.6.1.4.1.4743.1.2.2.3
Number of Hosts currently registered on the Base station
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssNumOfCPEsHighMark 1.3.6.1.4.1.4743.1.2.2.4
Highest Number of CPE's that were registered on the Base station
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfHostsHighMark 1.3.6.1.4.1.4743.1.2.2.5
Highest Number of Hosts that were registered on the Base station
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRelayCpeIdleTime 1.3.6.1.4.1.4743.1.2.2.6
The amount of time in seconds that the CPE can be idle before it is deleted from the base station. Idle time is defined as no uplink traffic from the CPE.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 600..176400  

expedIfBssRelayDHCPAgentCircuitId 1.3.6.1.4.1.4743.1.2.2.74
Indicate whether a relay DHCP agent circuit id is attached to all the client-to-server DHCP messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

expedIfBssRelayDHCPAgentRemoteId 1.3.6.1.4.1.4743.1.2.2.75
Indicate whether a relay DHCP agent remote id is attached to all the client-to-server DHCP messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

expedIfBssRelayDHCPNumAddAgentFail 1.3.6.1.4.1.4743.1.2.2.76
The number of failing to add agent circuit id and/or remote id in the client-to-server DHCP packets due to not enough space in the packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRelayDHCPNumDiscardExtraRelayInfo 1.3.6.1.4.1.4743.1.2.2.77
The number of DHCP packets discarded due to the existing relay agent information in the client-to-server DHCP packet when adding DHCP agent circuit id and/or remote id to it.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRelayDHCPNumDiscardNoEnd 1.3.6.1.4.1.4743.1.2.2.78
The number of DHCP packets discarded due to DHCP_END option missing when adding DHCP agent circuit id and/or remote id to client-to-server DHCP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRelayDHCPTimeout 1.3.6.1.4.1.4743.1.2.2.7
The amount of time in seconds waiting for completion of the DHCP conversation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 30..90  

expedIfBssRelayMaxSSTransit 1.3.6.1.4.1.4743.1.2.2.73
The max amount of time in 10ths of a second a sync session frame can live within the device before it is considered stale and is deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10  

expedIfBssRelayMaxTransit 1.3.6.1.4.1.4743.1.2.2.8
The max amount of time in 10ths of a second a datagram frame can live within the device before it is considered stale and is deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 10..40  

expedIfBssRelayIPHosts 1.3.6.1.4.1.4743.1.2.2.48
The current number of dynamic hosts that have IP access using DHCP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRelayPPPOEHosts 1.3.6.1.4.1.4743.1.2.2.49
The current number of dynamic hosts that have PPPoE access. This count does not include PPPoE access by static IP hosts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssAAAState 1.3.6.1.4.1.4743.1.2.2.9
Enables/Disables AAA Server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedIfBssAAAConnectionTime 1.3.6.1.4.1.4743.1.2.2.10
Date and Time of the current AAA connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssAAAConnectionAttempts 1.3.6.1.4.1.4743.1.2.2.11
Number of attempts for the current AAA connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAConfigConnection 1.3.6.1.4.1.4743.1.2.2.12
The configuration parameter that controls the address of the AAA server(s). This can be one or two IP addresses, separated by a space or comma, to specify a primary and a backup AAA server. expedIfBssAAACurrentConnection shows the IP address currently being used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

expedIfBssAAACurrentConnection 1.3.6.1.4.1.4743.1.2.2.13
IP address of the current AAA connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

expedIfBssAAAAuthority 1.3.6.1.4.1.4743.1.2.2.14
The Authority can be either local or remote. Local uses local authority parameters defined in ExpedIfBssLocalConfig for CPE permissions. Remote looks for authority from a Remote AAA Server for CPE permissions.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

expedIfBssAAACaching 1.3.6.1.4.1.4743.1.2.2.15
Enables/Disables aaa caching during remote authority. When enabled if the cpe is known by the base then the base will act as a cache and give authorization based on the last registration. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedIfBssAAAPort 1.3.6.1.4.1.4743.1.2.2.16
The Port the AAA Server is listening on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

expedIfBssLocalAllow 1.3.6.1.4.1.4743.1.2.2.50
The permission the Local Authority gives to each CPE, where enable allows CPEs to register, and disable disallows CPEs to register. Note: When a CPE is disallowed the CPE must be rebooted in order to register with this base station again. This defaults to enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedIfBssLocalHosts 1.3.6.1.4.1.4743.1.2.2.51
The number of hosts Local Authority allows behind each CPE. This defaults to 10
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

expedIfBssLocalSla 1.3.6.1.4.1.4743.1.2.2.52
The Service Level Agreement (SLA) parameters given to each CPE. This is of the form up-down, where up and down are decimal numbers between 0 and 10000, inclusive, separated by a dash character. This defaults to 100-100.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

expedIfBssLocalVlan 1.3.6.1.4.1.4743.1.2.2.53
The VLAN identifier Local Authority assigns to each CPE. This object replaces the expedDevVlanLegacyID object. This defaults to 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

expedIfBssLocalVoipAddress 1.3.6.1.4.1.4743.1.2.2.54
The VoIP server address Local Authority assigns to each CPE. allows the VoIP use through the CPE and disable disallows VoIP use through the CPE. This defaults to 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

expedIfBssLocalVoipState 1.3.6.1.4.1.4743.1.2.2.55
The VoIP state Local Authority assigns to each CPE, where enable allows the VoIP use through the CPE and disable disallows VoIP use through the CPE. This defaults to enable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedIfBssAAARegRequests 1.3.6.1.4.1.4743.1.2.2.17
Number of CPE registration requests received over the air.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAARegDenys 1.3.6.1.4.1.4743.1.2.2.18
Number of permission vectors that indicate a deny for a CPE registration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAARegConfirms 1.3.6.1.4.1.4743.1.2.2.19
Number of permission vectors that indicate a confirm for a CPE registration.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAARegCache 1.3.6.1.4.1.4743.1.2.2.20
Number of registration confirms due to caching. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAARegDuplicates 1.3.6.1.4.1.4743.1.2.2.21
Number of registration requests that are duplicates of a current registration request. Indicates that a second registration was received for a given CPE before the permission vector was received from the AAA server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAANoAAAResponse 1.3.6.1.4.1.4743.1.2.2.22
Number of registration requests that never received a permission vector from the AAA server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAACDRsSent 1.3.6.1.4.1.4743.1.2.2.23
Number of CDR's sent to the AAA server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAPVsRecv 1.3.6.1.4.1.4743.1.2.2.24
Number of PV's received from the AAA server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAUnexpectedPV 1.3.6.1.4.1.4743.1.2.2.25
Number of PV's received from the AAA server, that were not expected.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAADroppedCDRS 1.3.6.1.4.1.4743.1.2.2.32
Number of CDR's dropped due to out of buffer condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAAllow 1.3.6.1.4.1.4743.1.2.2.59
Total number of allow PV's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAADeny 1.3.6.1.4.1.4743.1.2.2.60
Total number of deny PV's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAADeregCPE 1.3.6.1.4.1.4743.1.2.2.61
Total number of de-reg CPE PV's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAABindIP 1.3.6.1.4.1.4743.1.2.2.62
Total number of bind IP PV's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAPutConfig 1.3.6.1.4.1.4743.1.2.2.63
Total number of put config PV's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAFetchConfig 1.3.6.1.4.1.4743.1.2.2.64
Total number of fetch config PV's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAUnkBase 1.3.6.1.4.1.4743.1.2.2.65
Total number of unknown base PV's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAVlanAtts 1.3.6.1.4.1.4743.1.2.2.66
Total number of VLAN attribute PV's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAABaseAtts 1.3.6.1.4.1.4743.1.2.2.67
Total number of base attribute PV's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAReconnect 1.3.6.1.4.1.4743.1.2.2.68
Total number of reconnect to primary AAA PV's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAHbCdr 1.3.6.1.4.1.4743.1.2.2.69
Total number of heartbeat messages (CDRs) sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAHbPv 1.3.6.1.4.1.4743.1.2.2.70
Total number of heartbeat messages (PVs) received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssAAAHbInterval 1.3.6.1.4.1.4743.1.2.2.71
Heartbeat interval received on the AAA connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssAAAHbDisconnects 1.3.6.1.4.1.4743.1.2.2.72
Total number of times the heartbeat detector forced disconnection from AAA due to timeout.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssCpeStatusTable 1.3.6.1.4.1.4743.1.2.2.26
A set of objects in the BSS, maintained for each CPE connected to this base station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExpedIfBssCpeStatusEntry

expedIfBssCpeStatusEntry 1.3.6.1.4.1.4743.1.2.2.26.1
Status information for a single CPE. An entry in this table exists for each CPE that is connected to the BSS implementing this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExpedIfBssCpeStatusEntry  

expedIfBssCpeStatusIndex 1.3.6.1.4.1.4743.1.2.2.26.1.1
Index value to uniquely identify an entry in this table. For an individual CPE, this index value should not change during BSS uptime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssCpeStatusMacAddress 1.3.6.1.4.1.4743.1.2.2.26.1.2
MAC address of this CPE. If the CPE has multiple MAC addresses, this is the MAC address associated with the Airlink interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssCpeStatusBytesFrom 1.3.6.1.4.1.4743.1.2.2.26.1.3
Number of bytes in from this CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssCpeStatusBytesTo 1.3.6.1.4.1.4743.1.2.2.26.1.4
Number of bytes out to this CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssCpeStatusMsgsFrom 1.3.6.1.4.1.4743.1.2.2.26.1.5
Number of Msgs in from this CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssCpeStatusMsgsTo 1.3.6.1.4.1.4743.1.2.2.26.1.6
Number of Msgs out to this CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssCpeNumOfHosts 1.3.6.1.4.1.4743.1.2.2.26.1.7
Number of hosts allowed for this CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssCpeISPId 1.3.6.1.4.1.4743.1.2.2.26.1.8
This contains the ID of the ISP that owns this CPE .
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssCpeVID 1.3.6.1.4.1.4743.1.2.2.26.1.9
This contains the VLAN ID the CPE has been assigned to.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssCpeStatusLastTime 1.3.6.1.4.1.4743.1.2.2.26.1.10
The date and time last heard from this CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

expedIfBssDynamicIPAssignment 1.3.6.1.4.1.4743.1.2.2.26.1.11
A true indicates that hosts behind this CPE acquire their IP Address via DHCP. False indicates static IP assignment. This object is obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssCpeSwVersion 1.3.6.1.4.1.4743.1.2.2.26.1.12
Version of software this CPE is running.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssCpeNumOfCalls 1.3.6.1.4.1.4743.1.2.2.26.1.13
Number Of Current Calls on this CPE
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssCpeDataPolls 1.3.6.1.4.1.4743.1.2.2.26.1.14
Number Of Data Polls from this CPE
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssCpeDryPolls 1.3.6.1.4.1.4743.1.2.2.26.1.15
Number Of Dry Polls from this CPE
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssCpeNoResponse 1.3.6.1.4.1.4743.1.2.2.26.1.16
Number Of No Response to Polls from this CPE
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssCpeCallEfficiency 1.3.6.1.4.1.4743.1.2.2.26.1.17
Efficiency use of the Bandwidth for this CPE
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssCpeBWUsage 1.3.6.1.4.1.4743.1.2.2.26.1.18
Sync Session Bandwidth Usage for all calls on this CPE from the perspective of base
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssCpeDownModulation 1.3.6.1.4.1.4743.1.2.2.26.1.19
Downlink Modulation Level
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssCpeDownLinkBandWidth 1.3.6.1.4.1.4743.1.2.2.26.1.20
Provisioned Downlink BandWidth limit. Unit is kbps. 'none' means no limit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssCpeUplinkBandWidth 1.3.6.1.4.1.4743.1.2.2.26.1.21
Provisioned Uplink BandWidth limit. Unit is kbps. 'none' means no limit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssCpeIdleTime 1.3.6.1.4.1.4743.1.2.2.26.1.22
Amount of time the CPE has been idle
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssCpeModelId 1.3.6.1.4.1.4743.1.2.2.26.1.23
Model Identifier for the subscriber unit. The primary hardware features of the subscriber unit are specified by this string representation of a hexidecimal, 32-bit number with a range of 00000000 - FFFFFFFF and a format of ABCCDDEE. A => Model Category 0 => Outdoor Base Station 1 => Indoor CPE 2 => Outdoor CPE 3 => Indoor Base Station 4 => Mobile Subscriber Unit B => Reserved 0 => Default CC => Board Type 01 => FPGA Wedge 02 => Dual Board ASIC Wedge, Davicom 03 => Single Board ASIC Wedge, SMSC, Indoor 04 => Single Board ASIC, SMSC, Outdoor 05 => Slimline, ASIC 12 => AMOD Dual Board, ASIC 15 => AMOD Slimline, ASIC 16 => AMOD 5407 Coldfire, ASIC 17 => AMOD LX CPE 18 => AMOD LX SoC CPE 22 => AMOD 5484 Coldfire, ASIC Base DD => Reserved 00 => 2.6 GHz 01 => 3.3 GHz 02 => 3.5 GHz 03 => 2.4 GHz 04 => 2.3 GHz 05 => 700MHz 06 => 3.7 GHz EE => Special Options 00 => External Antenna 01 => Vertical Antenna 02 => Horizontal Antenna
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssNumStaticHosts 1.3.6.1.4.1.4743.1.2.2.26.1.24
Number of static hosts allowed for this CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssCpeHostTable 1.3.6.1.4.1.4743.1.2.2.27
A set of objects in the BSS, maintained for each Host/CPE connected to this base station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExpedIfBssCpeHostEntry

expedIfBssCpeHostEntry 1.3.6.1.4.1.4743.1.2.2.27.1
Host information for a single CPE. An entry in this table exists for each CPE/Host that is connected to the BSS implementing this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExpedIfBssCpeHostEntry  

expedIfBssCpeHostIndex 1.3.6.1.4.1.4743.1.2.2.27.1.1
Index value to uniquely identify an entry in this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssCpeHostMacAddress 1.3.6.1.4.1.4743.1.2.2.27.1.2
MAC address of this CPE/Host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssCpeAirlinkMacAddress 1.3.6.1.4.1.4743.1.2.2.27.1.3
Airlink MAC address of this CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssCpeHostIpAddress 1.3.6.1.4.1.4743.1.2.2.27.1.4
IP address of this Host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

expedIfBssCpeHostIpType 1.3.6.1.4.1.4743.1.2.2.27.1.5
Indicates the type of host. Either dynamic, static or bound CPE Host.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssCpeHostPPPOE 1.3.6.1.4.1.4743.1.2.2.27.1.6
Indicates status of any PPOE sessions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssCpeHostVLANID 1.3.6.1.4.1.4743.1.2.2.27.1.7
Indicates VLAN ID the Host is on
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssVlanTable 1.3.6.1.4.1.4743.1.2.2.28
A set of objects in the BSS, maintained for each CPE connected to this base station.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExpedIfBssVlanEntry

expedIfBssVlanEntry 1.3.6.1.4.1.4743.1.2.2.28.1
Stats information for a single VLAN ID. An entry in this table exists for each VLAN.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExpedIfBssVlanEntry  

expedIfBssVlanIndex 1.3.6.1.4.1.4743.1.2.2.28.1.1
Index value to uniquely identify an entry in this table. For an individual VLAN, this index value should not change during BSS uptime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssVlanNumOfCpes 1.3.6.1.4.1.4743.1.2.2.28.1.2
Number of CPEs on this VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssVlanUpBytes 1.3.6.1.4.1.4743.1.2.2.28.1.3
Number of uplink bytes for this VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssVlanUpUnicastPkts 1.3.6.1.4.1.4743.1.2.2.28.1.4
Number of uplink unicast packets for this VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssVlanUpNUnicastPkts 1.3.6.1.4.1.4743.1.2.2.28.1.5
Number of uplink broadcast packets for this VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssVlanDnBytes 1.3.6.1.4.1.4743.1.2.2.28.1.6
Number of downlink bytes for this VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssVlanDnUnicastPkts 1.3.6.1.4.1.4743.1.2.2.28.1.7
Number of downlink unicast packets for this VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssVlanDnNUnicastPkts 1.3.6.1.4.1.4743.1.2.2.28.1.8
Number of downlink broadcast packets for this VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssVlanNumOfHosts 1.3.6.1.4.1.4743.1.2.2.28.1.9
Number of hosts on this VLAN
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssCPERemoteStatsTable 1.3.6.1.4.1.4743.1.2.2.29
Table of remote snmp stats gatherered over the air from each CPE.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExpedIfBssCPERemoteEntry

expedIfBssCPERemoteEntry 1.3.6.1.4.1.4743.1.2.2.29.1
Table of remote snmp stats gatherered over the air from each CPE.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExpedIfBssCPERemoteEntry  

expedIfBssRemoteCPEIndex 1.3.6.1.4.1.4743.1.2.2.29.1.1
Index value to uniquely identify an entry in this table. For an individual CPE, this index value should not change during BSS uptime.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEMacAddress 1.3.6.1.4.1.4743.1.2.2.29.1.2
Mac Address of the CPE being remotely monitored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssRemoteCPEPollSuccess 1.3.6.1.4.1.4743.1.2.2.29.1.3
Indicates the success of the last poll. True indicates a succes, False indicates SNMP was not able to get stats from the CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteSlot1-Success 1.3.6.1.4.1.4743.1.2.2.29.1.4
Number of messages successful on slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot1-NoAccess 1.3.6.1.4.1.4743.1.2.2.29.1.5
Number of message send failures due to uplink slot acquisition failure on slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot1-Failed 1.3.6.1.4.1.4743.1.2.2.29.1.6
Number of message send failures due to loss of uplink slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot2-Success 1.3.6.1.4.1.4743.1.2.2.29.1.7
Number of messages successful on slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot2-NoAccess 1.3.6.1.4.1.4743.1.2.2.29.1.8
Number of message send failures due to uplink slot acquisition failure on slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot2-Failed 1.3.6.1.4.1.4743.1.2.2.29.1.9
Number of message send failures due to loss of uplink slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot3-Success 1.3.6.1.4.1.4743.1.2.2.29.1.10
Number of messages successful on slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot3-NoAccess 1.3.6.1.4.1.4743.1.2.2.29.1.11
Number of message send failures due to uplink slot acquisition failure on slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot3-Failed 1.3.6.1.4.1.4743.1.2.2.29.1.12
Number of message send failures due to loss of uplink slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot4-Success 1.3.6.1.4.1.4743.1.2.2.29.1.13
Number of messages successful on slot
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot4-NoAccess 1.3.6.1.4.1.4743.1.2.2.29.1.14
Number of message send failures due to uplink slot acquisition failure on slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot4-Failed 1.3.6.1.4.1.4743.1.2.2.29.1.15
Number of message send failures due to loss of uplink slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot5-Success 1.3.6.1.4.1.4743.1.2.2.29.1.16
Number of messages successful on slot
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot5-NoAccess 1.3.6.1.4.1.4743.1.2.2.29.1.17
Number of message send failures due to uplink slot acquisition failure on slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot5-Failed 1.3.6.1.4.1.4743.1.2.2.29.1.18
Number of message send failures due to loss of uplink slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot6-Success 1.3.6.1.4.1.4743.1.2.2.29.1.19
Number of messages successful on slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot6-NoAccess 1.3.6.1.4.1.4743.1.2.2.29.1.20
Number of message send failures due to uplink slot acquisition failure on slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot6-Failed 1.3.6.1.4.1.4743.1.2.2.29.1.21
Number of message send failures due to loss of uplink slot.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot1-ACK 1.3.6.1.4.1.4743.1.2.2.29.1.22
Number of successful symbol transmissions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot1-NACK 1.3.6.1.4.1.4743.1.2.2.29.1.23
Number of symbol retries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot1-Busy 1.3.6.1.4.1.4743.1.2.2.29.1.24
Number of slot acquisition backoff due to slot busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot1-Free 1.3.6.1.4.1.4743.1.2.2.29.1.25
Number of slot acquisition failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot1-Lost 1.3.6.1.4.1.4743.1.2.2.29.1.26
Number of slot failures due to lost contention.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot1-Attempt 1.3.6.1.4.1.4743.1.2.2.29.1.27
Number of slot acquisitions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot2-ACK 1.3.6.1.4.1.4743.1.2.2.29.1.28
Number of successful symbol transmissions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot2-NACK 1.3.6.1.4.1.4743.1.2.2.29.1.29
Number of symbol retries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot2-Busy 1.3.6.1.4.1.4743.1.2.2.29.1.30
Number of slot acquisition backoff due to slot busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot2-Free 1.3.6.1.4.1.4743.1.2.2.29.1.31
Number of slot acquisition failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot2-Lost 1.3.6.1.4.1.4743.1.2.2.29.1.32
Number of slot failures due to lost contention.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot2-Attempt 1.3.6.1.4.1.4743.1.2.2.29.1.33
Number of slot acquisitions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot3-ACK 1.3.6.1.4.1.4743.1.2.2.29.1.34
Number of successful symbol transmissions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot3-NACK 1.3.6.1.4.1.4743.1.2.2.29.1.35
Number of symbol retries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot3-Busy 1.3.6.1.4.1.4743.1.2.2.29.1.36
Number of slot acquisition backoff due to slot busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot3-Free 1.3.6.1.4.1.4743.1.2.2.29.1.37
Number of slot acquisition failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot3-Lost 1.3.6.1.4.1.4743.1.2.2.29.1.38
Number of slot failures due to lost contention.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot3-Attempt 1.3.6.1.4.1.4743.1.2.2.29.1.39
Number of slot acquisitions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot4-ACK 1.3.6.1.4.1.4743.1.2.2.29.1.40
Number of successful symbol transmissions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot4-NACK 1.3.6.1.4.1.4743.1.2.2.29.1.41
Number of symbol retries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot4-Busy 1.3.6.1.4.1.4743.1.2.2.29.1.42
Number of slot acquisition backoff due to slot busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot4-Free 1.3.6.1.4.1.4743.1.2.2.29.1.43
Number of slot acquisition failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot4-Lost 1.3.6.1.4.1.4743.1.2.2.29.1.44
Number of slot failures due to lost contention.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot4-Attempt 1.3.6.1.4.1.4743.1.2.2.29.1.45
Number of slot acquisitions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot5-ACK 1.3.6.1.4.1.4743.1.2.2.29.1.46
Number of successful symbol transmissions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot5-NACK 1.3.6.1.4.1.4743.1.2.2.29.1.47
Number of symbol retries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot5-Busy 1.3.6.1.4.1.4743.1.2.2.29.1.48
Number of slot acquisition backoff due to slot busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot5-Free 1.3.6.1.4.1.4743.1.2.2.29.1.49
Number of slot acquisition failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot5-Lost 1.3.6.1.4.1.4743.1.2.2.29.1.50
Number of slot failures due to lost contention.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot5-Attempt 1.3.6.1.4.1.4743.1.2.2.29.1.51
Number of slot acquisitions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot6-ACK 1.3.6.1.4.1.4743.1.2.2.29.1.52
Number of successful symbol transmissions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot6-NACK 1.3.6.1.4.1.4743.1.2.2.29.1.53
Number of symbol retries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot6-Busy 1.3.6.1.4.1.4743.1.2.2.29.1.54
Number of slot acquisition backoff due to slot busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot6-Free 1.3.6.1.4.1.4743.1.2.2.29.1.55
Number of slot acquisition failures.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot6-Lost 1.3.6.1.4.1.4743.1.2.2.29.1.56
Number of slot failures due to lost contention.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSlot6-Attempt 1.3.6.1.4.1.4743.1.2.2.29.1.57
Number of slot acquisitions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteGoodSymbols 1.3.6.1.4.1.4743.1.2.2.29.1.58
Number of good symbols received by the CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteBadSymbols 1.3.6.1.4.1.4743.1.2.2.29.1.59
Number of bad symbols received by the CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteUnderFlows 1.3.6.1.4.1.4743.1.2.2.29.1.60
Number of times the signal processor was in an underflow condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteOverFlows 1.3.6.1.4.1.4743.1.2.2.29.1.61
Number of times the signal processor was in an overflow condition.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteSymbolCount 1.3.6.1.4.1.4743.1.2.2.29.1.62
Number of symbols evaluated to accumulate the score.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteBadSymbolCount 1.3.6.1.4.1.4743.1.2.2.29.1.63
Number of bad symbols in the evaluation of the score.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteBER 1.3.6.1.4.1.4743.1.2.2.29.1.64
Bit Error rate calculated during the score evaluation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteAvRSSI 1.3.6.1.4.1.4743.1.2.2.29.1.65
Average RSSI calculated during the score evaluation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteAvVT 1.3.6.1.4.1.4743.1.2.2.29.1.66
Average Viterbi calculated during the score evaluation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteAccumRS 1.3.6.1.4.1.4743.1.2.2.29.1.67
Reed Solomon errors calculated during the score evaluation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteScore 1.3.6.1.4.1.4743.1.2.2.29.1.68
Accumulated calculated score.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteAirConnectTime 1.3.6.1.4.1.4743.1.2.2.29.1.69
Indicates how long the CPE has been connected to a base station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  



expedIfBssRemoteHomeColorCode 1.3.6.1.4.1.4743.1.2.2.29.1.72
Indicates the home color code assigned to this CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteExtendedRange 1.3.6.1.4.1.4743.1.2.2.29.1.73
Indicates whether the CPE is enabled for extended range or not.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteRangingValue 1.3.6.1.4.1.4743.1.2.2.29.1.74
Indicates the maximum distance (range) the CPE will try to register at, before moving on to a different base.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteTriggerValue 1.3.6.1.4.1.4743.1.2.2.29.1.75
The actual trigger value that the signal processor is programmed with.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteCPEBaseObsCh1 1.3.6.1.4.1.4743.1.2.2.29.1.76
Channel of the base station observed by the CPE in the base observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

expedIfBssRemoteCPEBaseObsMac1 1.3.6.1.4.1.4743.1.2.2.29.1.77
Mac address of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssRemoteCPEBaseObsCC1 1.3.6.1.4.1.4743.1.2.2.29.1.78
Color code of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsScore1 1.3.6.1.4.1.4743.1.2.2.29.1.79
Score of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsAuth1 1.3.6.1.4.1.4743.1.2.2.29.1.80
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsBusy1 1.3.6.1.4.1.4743.1.2.2.29.1.81
True indicates this base observed is busy and is not recommending registrations to it.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsRang1 1.3.6.1.4.1.4743.1.2.2.29.1.82
True indicates the CPE has completed extended ranging with this base station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsCh2 1.3.6.1.4.1.4743.1.2.2.29.1.83
Channel of the base station observed by the CPE in the base observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

expedIfBssRemoteCPEBaseObsMac2 1.3.6.1.4.1.4743.1.2.2.29.1.84
Mac address of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssRemoteCPEBaseObsCC2 1.3.6.1.4.1.4743.1.2.2.29.1.85
Color code of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsScore2 1.3.6.1.4.1.4743.1.2.2.29.1.86
Score of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsAuth2 1.3.6.1.4.1.4743.1.2.2.29.1.87
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsBusy2 1.3.6.1.4.1.4743.1.2.2.29.1.88
True indicates this base observed is busy and is not recommending registrations to it.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsRang2 1.3.6.1.4.1.4743.1.2.2.29.1.89
True indicates the CPE has completed extended ranging with this base station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsCh3 1.3.6.1.4.1.4743.1.2.2.29.1.90
Channel of the base station observed by the CPE in the base observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

expedIfBssRemoteCPEBaseObsMac3 1.3.6.1.4.1.4743.1.2.2.29.1.91
Mac address of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssRemoteCPEBaseObsCC3 1.3.6.1.4.1.4743.1.2.2.29.1.92
Color code of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsScore3 1.3.6.1.4.1.4743.1.2.2.29.1.93
Score of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsAuth3 1.3.6.1.4.1.4743.1.2.2.29.1.94
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsBusy3 1.3.6.1.4.1.4743.1.2.2.29.1.95
True indicates this base observed is busy and is not recommending registrations to it.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsRang3 1.3.6.1.4.1.4743.1.2.2.29.1.96
True indicates the CPE has completed extended ranging with this base station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsCh4 1.3.6.1.4.1.4743.1.2.2.29.1.97
Channel of the base station observed by the CPE in the base observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

expedIfBssRemoteCPEBaseObsMac4 1.3.6.1.4.1.4743.1.2.2.29.1.98
Mac address of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssRemoteCPEBaseObsCC4 1.3.6.1.4.1.4743.1.2.2.29.1.99
Color code of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsScore4 1.3.6.1.4.1.4743.1.2.2.29.1.100
Score of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsAuth4 1.3.6.1.4.1.4743.1.2.2.29.1.101
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsBusy4 1.3.6.1.4.1.4743.1.2.2.29.1.102
True indicates this base is observed busy and is not recommending registrations to it.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsRang4 1.3.6.1.4.1.4743.1.2.2.29.1.103
True indicates the CPE has completed extended ranging with this base station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsCh5 1.3.6.1.4.1.4743.1.2.2.29.1.104
Channel of the base station observed by the CPE in the base observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

expedIfBssRemoteCPEBaseObsMac5 1.3.6.1.4.1.4743.1.2.2.29.1.105
Mac address of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssRemoteCPEBaseObsCC5 1.3.6.1.4.1.4743.1.2.2.29.1.106
Color code of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsScore5 1.3.6.1.4.1.4743.1.2.2.29.1.107
Score of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsAuth5 1.3.6.1.4.1.4743.1.2.2.29.1.108
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsBusy5 1.3.6.1.4.1.4743.1.2.2.29.1.109
True indicates this base observed is busy and is not recommending registrations to it.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsRang5 1.3.6.1.4.1.4743.1.2.2.29.1.110
True indicates the CPE has completed extended ranging with this base station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsCh6 1.3.6.1.4.1.4743.1.2.2.29.1.111
Channel of the base station observed by the CPE in the base observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..32  

expedIfBssRemoteCPEBaseObsMac6 1.3.6.1.4.1.4743.1.2.2.29.1.112
Mac address of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssRemoteCPEBaseObsCC6 1.3.6.1.4.1.4743.1.2.2.29.1.113
Color code of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsScore6 1.3.6.1.4.1.4743.1.2.2.29.1.114
Score of the base station observed by the CPE in the observation table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

expedIfBssRemoteCPEBaseObsAuth6 1.3.6.1.4.1.4743.1.2.2.29.1.115
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsBusy6 1.3.6.1.4.1.4743.1.2.2.29.1.116
True indicates this base observed is busy and is not recommending registrations to it.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPEBaseObsRang6 1.3.6.1.4.1.4743.1.2.2.29.1.117
True indicates the CPE has completed extended ranging with this base station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

expedIfBssRemoteCPENumActCalls 1.3.6.1.4.1.4743.1.2.2.29.1.118
Number of active calls on the CPE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteCPEDataPolls 1.3.6.1.4.1.4743.1.2.2.29.1.119
Number Of Data Polls for this CPE
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPEDryPolls 1.3.6.1.4.1.4743.1.2.2.29.1.120
Number Of Dry Polls for this CPE
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPEUnexpected 1.3.6.1.4.1.4743.1.2.2.29.1.121
Number Of Unexpected Polls for this CPE
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPEBWUsage 1.3.6.1.4.1.4743.1.2.2.29.1.122
Sync Session Bandwidth Usage for all calls on this CPE from the perspective of CPE
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteCPEEfficiency 1.3.6.1.4.1.4743.1.2.2.29.1.123
Efficiency use of bandwidth for all calls on this CPE
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteCPEHighWater 1.3.6.1.4.1.4743.1.2.2.29.1.124
Highest Queue Depth for call symbols.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPEVoiceFrRt 1.3.6.1.4.1.4743.1.2.2.29.1.125
Rate of packets received over the Ethernet for Voice Call.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteCPEAvgNPI 1.3.6.1.4.1.4743.1.2.2.29.1.126
Avg Next Poll Interval (NPI). This tells the base how often the CPE wants to be polled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteCPEConcatBuffers 1.3.6.1.4.1.4743.1.2.2.29.1.127
Number of times concatenation took place on the uplink.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPENumBufConcat 1.3.6.1.4.1.4743.1.2.2.29.1.128
Number of ethernet frames that were concatenated together.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPECurrentTemp 1.3.6.1.4.1.4743.1.2.2.29.1.129
Current Temperature on the CPE in Celsius. A value of -273 indicates that the CPE has no temperature sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteCPETxPower 1.3.6.1.4.1.4743.1.2.2.29.1.130
Current Transmit power on the CPE in dB. A value of 0 indicates that the CPE has no power sensor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssRemoteCPEQPSKUp 1.3.6.1.4.1.4743.1.2.2.29.1.131
Number of bytes on the uplink at QPSK modulation level
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPEQPSKDown 1.3.6.1.4.1.4743.1.2.2.29.1.132
Number of bytes on the downlink at QPSK modulation level
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPE16QUp 1.3.6.1.4.1.4743.1.2.2.29.1.133
Number of bytes on the uplink at 16 QAM modulation level
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPE16QDown 1.3.6.1.4.1.4743.1.2.2.29.1.134
Number of bytes on the downlink at 16 QAM modulation level
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPE64QUp 1.3.6.1.4.1.4743.1.2.2.29.1.135
Number of bytes on the uplink at 64 QAM modulation level
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPE64QDown 1.3.6.1.4.1.4743.1.2.2.29.1.136
Number of bytes on the downlink at 64 QAM modulation level
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPE16QLiteUp 1.3.6.1.4.1.4743.1.2.2.29.1.137
Number of bytes on the uplink at 16 QAM Lite modulation level
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCPE16QLiteDown 1.3.6.1.4.1.4743.1.2.2.29.1.138
Number of bytes on the downlink at 16 QAM Lite modulation level
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssRemoteCurrentRxLevel 1.3.6.1.4.1.4743.1.2.2.29.1.139
Current RX Modulation Level
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssRemoteCurrentTxLevel 1.3.6.1.4.1.4743.1.2.2.29.1.140
Current TX Modulation Level
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssRemotePollInterval 1.3.6.1.4.1.4743.1.2.2.30
Indicates how often each CPE in the BssRemoteCPE table will be queried for over the air SNMP stats.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 15..50000  

expedIfBssRemotePollTimeout 1.3.6.1.4.1.4743.1.2.2.31
Indicates how long to wait for an over the air SNMP query to complete before indicating that the Poll was unsuccessful.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..20  

expedIfBssNoResToPollTimeout 1.3.6.1.4.1.4743.1.2.2.33
Number of seconds to wait for a Response to a Poll before tearing down the call.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 15..1000  

expedIfBssMaxNumberOfCalls 1.3.6.1.4.1.4743.1.2.2.34
Maximum number of calls this base has been provisioned for.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssCurrentNumberOfCalls 1.3.6.1.4.1.4743.1.2.2.35
Current number of active calls on this base.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssAdmissionCtrl 1.3.6.1.4.1.4743.1.2.2.79
VoIP admission control. The enable of VoIP admission control turns on the stream precedence and preemption capability.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedIfBssNumberOfReleaseRetries 1.3.6.1.4.1.4743.1.2.2.80
Number of retransmission of Sync Session release message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

expedIfBssHiModulation 1.3.6.1.4.1.4743.1.2.2.81
Controls whether or not high modulation can be used to transport VoIP traffic on the uplink. When enabled, a transmitting CPE is allowed to use a modulation higher than the basic QPSK modulation level. When disabled, CPEs must use QPSK modulation for all uplink VoIP data. Note that this only controls uplink VoIP modulation.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

expedIfBssNumOfCallPri0 1.3.6.1.4.1.4743.1.2.2.82
The total number of calls requested by a CPE on this base at priority 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfCallPri1 1.3.6.1.4.1.4743.1.2.2.83
The total number of calls requested by a CPE on this base at priority 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfCallPri2 1.3.6.1.4.1.4743.1.2.2.84
The total number of calls requested by a CPE on this base at priority 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfCallPri3 1.3.6.1.4.1.4743.1.2.2.85
The total number of calls requested by a CPE on this base at priority 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfCallRoamPri0 1.3.6.1.4.1.4743.1.2.2.101
The total number of calls roamed to this base at priority 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfCallRoamPri1 1.3.6.1.4.1.4743.1.2.2.102
The total number of calls roamed to this base at priority 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfCallRoamPri2 1.3.6.1.4.1.4743.1.2.2.103
The total number of calls roamed to this base at priority 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfCallRoamPri3 1.3.6.1.4.1.4743.1.2.2.104
The total number of calls roamed to this base at priority 3.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfCallPreemptedPri0 1.3.6.1.4.1.4743.1.2.2.86
The number of calls preempted at priority 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfCallPreemptedPri1 1.3.6.1.4.1.4743.1.2.2.87
The number of calls preempted at priority 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfCallPreemptedPri2 1.3.6.1.4.1.4743.1.2.2.88
The number of calls preempted at priority 2.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfBusyCallOrigPri0 1.3.6.1.4.1.4743.1.2.2.89
The number of calls at priority 0 that is failed to make due to originator VoIP busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfBusyCallOrigPri1 1.3.6.1.4.1.4743.1.2.2.90
The number of calls at priority 1 that is failed to make due to originator VoIP busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfBusyCallOrigPri2 1.3.6.1.4.1.4743.1.2.2.91
The number of calls at priority 2 that is failed to make due to originator VoIP busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfBusyCallOrigPri3 1.3.6.1.4.1.4743.1.2.2.92
The number of calls at priority 3 that is failed to make due to originator VoIP busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfBusyCallTermPri0 1.3.6.1.4.1.4743.1.2.2.93
The number of calls at priority 0 that is failed to make due to terminator VoIP busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfBusyCallTermPri1 1.3.6.1.4.1.4743.1.2.2.94
The number of calls at priority 1 that is failed to make due to terminator VoIP busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfBusyCallTermPri2 1.3.6.1.4.1.4743.1.2.2.95
The number of calls at priority 2 that is failed to make due to terminator VoIP busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfBusyCallTermPri3 1.3.6.1.4.1.4743.1.2.2.96
The number of calls at priority 3 that is failed to make due to terminator VoIP busy.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfVoIPNotAllowOrig 1.3.6.1.4.1.4743.1.2.2.97
The number of calls that is failed to make due to originator cpe not provisioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfVoIPNotAllowTerm 1.3.6.1.4.1.4743.1.2.2.98
The number of calls that is failed to make due to terminator cpe not provisioned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfVoIPNotAuthOrig 1.3.6.1.4.1.4743.1.2.2.99
The number of calls that is failed to make due to originator cpe requesting a wrong SIP server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssNumOfVoIPNotAuthTerm 1.3.6.1.4.1.4743.1.2.2.100
The number of calls that is failed to make due to terminator cpe requesting a wrong SIP server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssQPSKCpes 1.3.6.1.4.1.4743.1.2.2.36
Current number of CPEs with downlink modulation at QPSK. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBss16QAMCpes 1.3.6.1.4.1.4743.1.2.2.37
Current number of CPEs with downlink modulation at 16 QAM. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBss64QAMCpes 1.3.6.1.4.1.4743.1.2.2.38
Current number of CPEs with downlink modulation at 64 QAM. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBss16QAMLiteCpes 1.3.6.1.4.1.4743.1.2.2.39
Current number of CPEs with downlink modulation at 16 QAMLite. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssQPSKDownBytes 1.3.6.1.4.1.4743.1.2.2.40
Total number of QPSK bytes sent from the base on the downlink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssQPSKUpBytes 1.3.6.1.4.1.4743.1.2.2.41
Total number of QPSK bytes received by the base on the uplink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBss16QAMDownBytes 1.3.6.1.4.1.4743.1.2.2.42
Total number of 16 QAM bytes sent from the base on the downlink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBss16QAMUpBytes 1.3.6.1.4.1.4743.1.2.2.43
Total number of 16 QAM bytes received by the base on the uplink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBss64QAMDownBytes 1.3.6.1.4.1.4743.1.2.2.44
Total number of 64 QAM bytes sent from the base on the downlink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBss64QAMUpBytes 1.3.6.1.4.1.4743.1.2.2.45
Total number of 64 QAM bytes received by the base on the uplink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBss16QAMLiteDownBytes 1.3.6.1.4.1.4743.1.2.2.46
Total number of 16 QAM Lite bytes sent from the base on the downlink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBss16QAMLiteUpBytes 1.3.6.1.4.1.4743.1.2.2.47
Total number of 16 QAM Lite bytes received by the base on the uplink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssModTbl 1.3.6.1.4.1.4743.1.2.2.56
Table of stats for throughput at each modulation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ExpedIfBssModTblEntry

expedIfBssModTblEntry 1.3.6.1.4.1.4743.1.2.2.56.1
Table of stats for throughput at each modulation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ExpedIfBssModTblEntry  

expedIfBssModTblIndex 1.3.6.1.4.1.4743.1.2.2.56.1.1
Index for each modulation
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..15  

expedIfBssModTblName 1.3.6.1.4.1.4743.1.2.2.56.1.2
Descriptive name for the modulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

expedIfBssModTblUpSlotUsage 1.3.6.1.4.1.4743.1.2.2.56.1.3
Total uplink slots at each modulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssModTblUpSlotVOIP 1.3.6.1.4.1.4743.1.2.2.56.1.4
Total uplink slots for voip at each modulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssModTblUpBytes 1.3.6.1.4.1.4743.1.2.2.56.1.5
Total uplink bytes at each modulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssModTblUpMessages 1.3.6.1.4.1.4743.1.2.2.56.1.6
Total uplink messages at each modulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssModTblDownSlotUsage 1.3.6.1.4.1.4743.1.2.2.56.1.7
Total downlink slot usage at each modulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssModTblDownBytes 1.3.6.1.4.1.4743.1.2.2.56.1.8
Total downlink bytes at each modulation (includes VoIP bytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssModTblNumCPES 1.3.6.1.4.1.4743.1.2.2.56.1.9
Number CPEs at each modulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssModTblChgReqs 1.3.6.1.4.1.4743.1.2.2.56.1.10
Number change modulation requests received for each modulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssModTblDownBytesVOIP 1.3.6.1.4.1.4743.1.2.2.56.1.11
Total VoIP downlink bytes at each modulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssModTblUpBytesVOIP 1.3.6.1.4.1.4743.1.2.2.56.1.12
Total VoIP uplink bytes at each modulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

expedIfBssModUpSlotsPerSec 1.3.6.1.4.1.4743.1.2.2.57
Total uplink slots per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedIfBssModDownSlotsPerSec 1.3.6.1.4.1.4743.1.2.2.58
Total down slots per second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

expedDevTrapVars 1.3.6.1.4.1.4743.2.3
OBJECT IDENTIFIER    

expedDevTrapBTSName 1.3.6.1.4.1.4743.2.3.1
System name of the BTS sending the trap. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

expedDevTrapBTSLocation 1.3.6.1.4.1.4743.2.3.2
System location of the BTS sending the trap. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

expedDevTrapBTSMessage 1.3.6.1.4.1.4743.2.3.3
Message that is accompanying the trap. This object is obsolete as of base station software version 4.3 and has no replacement.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

nextnetTraps 0
Specifies the nextnet traps. This object is obsolete as of base station software version 4.3 and has no replacement.
TRAP-TYPE